diff options
Diffstat (limited to 'board/variscite/dart_6ul/README')
| -rw-r--r-- | board/variscite/dart_6ul/README | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/board/variscite/dart_6ul/README b/board/variscite/dart_6ul/README new file mode 100644 index 0000000000..d76b997e22 --- /dev/null +++ b/board/variscite/dart_6ul/README @@ -0,0 +1,41 @@ +How to use U-Boot on variscite DART-6UL Evaluation Kit +------------------------------------------------------ + +- Configure and build U-Boot for DART-6UL iMX6ULL: + + $ make mrproper + $ make variscite_dart6ul_defconfig + $ make + + This will generate SPL and u-boot-dtb.img images. + +Boot from MMC/SD: +- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card: + + $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync + $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync + +- Boot mode settings: + + Boot switch position: SW1 -> 0 + SW2 -> 0 + +Boot from eMMC: +- if bootpart is not enabled by default, to enable under Linux + echo 0 >/sys/block/mmcblk1boot0/force_ro + mmc bootpart enable 1 1 /dev/mmcblk1boot0 + +- Flash the SPL and u-boot-dtb.img to mmcblk1boot0 + $ sudo dd if=SPL of=/dev/mmcblk1boot0 bs=1k seek=1; sync + $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk1boot0 bs=1k seek=69; sync + +- Boot mode settings: + + Boot switch position: SW1 -> 0 + SW2 -> 1 + +- Connect the Serial cable to UART0 and the PC for the console. + +- Insert the micro SD card in the board and power it up. + +- U-Boot messages should come up. |