1 files changed, 0 insertions, 126 deletions
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
deleted file mode 100644
index 8d777df846..0000000000
--- a/board/vpac270/vpac270.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Voipac PXA270 Support
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/regs-mmc.h>
-#include <asm/arch/pxa.h>
-#include <netdev.h>
-#include <serial.h>
-#include <asm/io.h>
-#include <usb.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* Arch number of vpac270 */
-	gd->bd->bi_arch_number = MACH_TYPE_VPAC270;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0xa0000100;
-
-	return 0;
-}
-
-int dram_init(void)
-{
-#ifndef	CONFIG_ONENAND
-	pxa2xx_dram_init();
-#endif
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-#ifdef	CONFIG_RAM_256M
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
-#endif
-}
-
-#ifdef	CONFIG_CMD_MMC
-int board_mmc_init(bd_t *bis)
-{
-	pxa_mmc_register(0);
-	return 0;
-}
-#endif
-
-#ifdef	CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
-	writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
-		UHCHR);
-
-	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
-	while (readl(UHCHR) & UHCHR_FSBIR)
-		;
-
-	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
-	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
-	/* Clear any OTG Pin Hold */
-	if (readl(PSSR) & PSSR_OTGPH)
-		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
-	writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
-	writel(readl(UHCRHDA) | 0x100, UHCRHDA);
-
-	/* Set port power control mask bits, only 3 ports. */
-	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
-
-	/* enable port 2 */
-	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
-		UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
-	return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
-	return 0;
-}
-
-void usb_board_stop(void)
-{
-	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
-	udelay(11);
-	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
-	writel(readl(UHCCOMS) | 1, UHCCOMS);
-	udelay(10);
-
-	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-
-	return;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(bd_t *bis)
-{
-	return dm9000_initialize(bis);
-}
-#endif