diff options
Diffstat (limited to 'board/warp')
| -rw-r--r-- | board/warp/Kconfig | 12 | ||||
| -rw-r--r-- | board/warp/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/warp/Makefile | 8 | ||||
| -rw-r--r-- | board/warp/warp.c | 119 |
4 files changed, 145 insertions, 0 deletions
diff --git a/board/warp/Kconfig b/board/warp/Kconfig new file mode 100644 index 0000000000..7b569ccb64 --- /dev/null +++ b/board/warp/Kconfig @@ -0,0 +1,12 @@ +if TARGET_WARP + +config SYS_BOARD + default "warp" + +config SYS_SOC + default "mx6" + +config SYS_CONFIG_NAME + default "warp" + +endif diff --git a/board/warp/MAINTAINERS b/board/warp/MAINTAINERS new file mode 100644 index 0000000000..ee2114d082 --- /dev/null +++ b/board/warp/MAINTAINERS @@ -0,0 +1,6 @@ +WaRP BOARD +M: Otavio Salvador <otavio@ossystems.com.br> +S: Maintained +F: board/warp/ +F: include/configs/warp.h +F: configs/warp_defconfig diff --git a/board/warp/Makefile b/board/warp/Makefile new file mode 100644 index 0000000000..c555f87397 --- /dev/null +++ b/board/warp/Makefile @@ -0,0 +1,8 @@ +# Copyright (C) 2014 O.S. Systems Software LTDA. +# Copyright (C) 2014 Kynetics LLC. +# Copyright (C) 2014 Revolution Robotics, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := warp.o diff --git a/board/warp/warp.c b/board/warp/warp.c new file mode 100644 index 0000000000..21ac5e7d74 --- /dev/null +++ b/board/warp/warp.c @@ -0,0 +1,119 @@ +/* + * Copyright (C) 2014, 2015 O.S. Systems Software LTDA. + * Copyright (C) 2014 Kynetics LLC. + * Copyright (C) 2014 Revolution Robotics, Inc. + * + * Author: Otavio Salvador <otavio@ossystems.com.br> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/io.h> +#include <linux/sizes.h> +#include <common.h> +#include <watchdog.h> +#include <fsl_esdhc.h> +#include <mmc.h> +#include <usb.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS | \ + PAD_CTL_LVE) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS | \ + PAD_CTL_LVE) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static void setup_iomux_uart(void) +{ + static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +static struct fsl_esdhc_cfg usdhc_cfg[1] = { + {USDHC2_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; /* Assume boot SD always present */ +} + +int board_mmc_init(bd_t *bis) +{ + static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_RST__USDHC2_RST | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +int board_usb_phy_mode(int port) +{ + return USB_INIT_DEVICE; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int board_late_init(void) +{ +#ifdef CONFIG_HW_WATCHDOG + hw_watchdog_init(); +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: WaRP Board\n"); + + return 0; +} |