8 files changed, 91 insertions, 14 deletions
diff --git a/board/imgtec/malta/malta.c b/board/imgtec/malta/malta.c
index cae4a21c3d..e31331aec1 100644
--- a/board/imgtec/malta/malta.c
+++ b/board/imgtec/malta/malta.c
@@ -130,24 +130,26 @@ void _machine_restart(void)
 
 int board_early_init_f(void)
 {
-	void *io_base;
+	ulong io_base;
 
 	/* choose correct PCI I/O base */
 	switch (malta_sys_con()) {
 	case SYSCON_GT64120:
-		io_base = (void *)CKSEG1ADDR(MALTA_GT_PCIIO_BASE);
+		io_base = CKSEG1ADDR(MALTA_GT_PCIIO_BASE);
 		break;
 
 	case SYSCON_MSC01:
-		io_base = (void *)CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE);
+		io_base = CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE);
 		break;
 
 	default:
 		return -1;
 	}
 
+	set_io_port_base(io_base);
+
 	/* setup FDC37M817 super I/O controller */
-	malta_superio_init(io_base);
+	malta_superio_init();
 
 	return 0;
 }
@@ -179,8 +181,6 @@ void pci_init_board(void)
 
 	switch (malta_sys_con()) {
 	case SYSCON_GT64120:
-		set_io_port_base(CKSEG1ADDR(MALTA_GT_PCIIO_BASE));
-
 		gt64120_pci_init((void *)CKSEG1ADDR(MALTA_GT_BASE),
 				 0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
 				 0x10000000, 0x10000000, 128 * 1024 * 1024,
@@ -189,8 +189,6 @@ void pci_init_board(void)
 
 	default:
 	case SYSCON_MSC01:
-		set_io_port_base(CKSEG1ADDR(MALTA_MSC01_PCIIO_BASE));
-
 		msc01_pci_init((void *)CKSEG1ADDR(MALTA_MSC01_PCI_BASE),
 			       0x00000000, 0x00000000, CONFIG_SYS_MEM_SIZE,
 			       MALTA_MSC01_PCIMEM_MAP,
diff --git a/board/imgtec/malta/superio.c b/board/imgtec/malta/superio.c
index eaa14df39e..7865ae2b70 100644
--- a/board/imgtec/malta/superio.c
+++ b/board/imgtec/malta/superio.c
@@ -45,19 +45,19 @@ static struct {
 	{ SIOCONF_ACTIVATE,	0x01 },
 };
 
-void malta_superio_init(void *io_base)
+void malta_superio_init(void)
 {
 	unsigned i;
 
 	/* enter config state */
-	writeb(SIOCONF_ENTER_SETUP, io_base + SIO_CONF_PORT);
+	outb(SIOCONF_ENTER_SETUP, SIO_CONF_PORT);
 
 	/* configure peripherals */
 	for (i = 0; i < ARRAY_SIZE(sio_config); i++) {
-		writeb(sio_config[i].key, io_base + SIO_CONF_PORT);
-		writeb(sio_config[i].data, io_base + SIO_DATA_PORT);
+		outb(sio_config[i].key, SIO_CONF_PORT);
+		outb(sio_config[i].data, SIO_DATA_PORT);
 	}
 
 	/* exit config state */
-	writeb(SIOCONF_EXIT_SETUP, io_base + SIO_CONF_PORT);
+	outb(SIOCONF_EXIT_SETUP, SIO_CONF_PORT);
 }
diff --git a/board/imgtec/malta/superio.h b/board/imgtec/malta/superio.h
index 1450da56dd..271c462eac 100644
--- a/board/imgtec/malta/superio.h
+++ b/board/imgtec/malta/superio.h
@@ -10,6 +10,6 @@
 #ifndef __BOARD_MALTA_SUPERIO_H__
 #define __BOARD_MALTA_SUPERIO_H__
 
-extern void malta_superio_init(void *io_base);
+void malta_superio_init(void);
 
 #endif /* __BOARD_MALTA_SUPERIO_H__ */
diff --git a/board/microchip/pic32mzda/Kconfig b/board/microchip/pic32mzda/Kconfig
new file mode 100644
index 0000000000..8acb393369
--- /dev/null
+++ b/board/microchip/pic32mzda/Kconfig
@@ -0,0 +1,13 @@
+
+if TARGET_PIC32MZDASK
+
+config SYS_BOARD
+	default "pic32mzda"
+
+config SYS_VENDOR
+	default "microchip"
+
+config SYS_CONFIG_NAME
+	default "pic32mzdask"
+
+endif
diff --git a/board/microchip/pic32mzda/MAINTAINERS b/board/microchip/pic32mzda/MAINTAINERS
new file mode 100644
index 0000000000..c934f1a1f5
--- /dev/null
+++ b/board/microchip/pic32mzda/MAINTAINERS
@@ -0,0 +1,6 @@
+PIC32MZDASK BOARD
+M:	Purna Chandra Mandal <purna.mandal@microchip.com>
+S:	Maintained
+F:	board/microchip/pic32mzda/
+F:	include/configs/pic32mzdask.h
+F:	configs/pic32mzdask_defconfig
diff --git a/board/microchip/pic32mzda/Makefile b/board/microchip/pic32mzda/Makefile
new file mode 100644
index 0000000000..36295302a1
--- /dev/null
+++ b/board/microchip/pic32mzda/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2015
+# Purna Chandra Mandal, purna.mandal@microchip.com.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+obj-y := pic32mzda.o
diff --git a/board/microchip/pic32mzda/README b/board/microchip/pic32mzda/README
new file mode 100644
index 0000000000..91d16ab7dc
--- /dev/null
+++ b/board/microchip/pic32mzda/README
@@ -0,0 +1,22 @@
+/*
+ * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
+ */
+
+PIC32MZ[DA] Starter Kit
+----------------------------------------
+PIC32MZ[DA] Starter Kit is based on PIC32MZ[DA] family of micro-controller.
+This family is powered by MIPS M14KEC 32bit general purpose core and has
+advanced microcontroller features and peripherals.
+
+This processor boots with proprietary stage1 bootloader running from internal
+boot-flash. Stage1 bootloader inturns locates and jumps to U-Boot programmed
+on internal program-flash. Finally U-Boot loads OS image (along with other
+required files for booting) from either uSD card, or ethernet, or from USB
+storage.
+
+To boot Linux following three files are mandatory - uEnv.txt (custom U-Boot
+environment file), uImage, *.dtb (platform device-tree-blob file).
+
+U-Boot jumps to Linux using UHI specification.
+
+Visit http://microchip.com for details.
diff --git a/board/microchip/pic32mzda/pic32mzda.c b/board/microchip/pic32mzda/pic32mzda.c
new file mode 100644
index 0000000000..afe2ab8b71
--- /dev/null
+++ b/board/microchip/pic32mzda/pic32mzda.c
@@ -0,0 +1,31 @@
+/*
+ * Microchip PIC32MZ[DA] Starter Kit board
+ *
+ * Copyright (C) 2015, Microchip Technology Inc.
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <mach/pic32.h>
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	ulong rate = 0;
+	struct udevice *dev;
+
+	printf("Core: %s\n", get_core_name());
+
+	if (!uclass_get_device(UCLASS_CLK, 0, &dev)) {
+		rate = clk_get_rate(dev);
+		printf("CPU Speed: %lu MHz\n", rate / 1000000);
+	}
+
+	return 0;
+}
+#endif