diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/sunxi/Kconfig | 21 | ||||
| -rw-r--r-- | board/sunxi/MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/sunxi/board.c | 26 | ||||
| -rw-r--r-- | board/sunxi/gmac.c | 2 |
4 files changed, 49 insertions, 1 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 5b2d091122..c3f865d298 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -16,6 +16,7 @@ config MACH_SUN5I config MACH_SUN6I bool "sun6i (Allwinner A31)" select CPU_V7 + select SUPPORT_SPL config MACH_SUN7I bool "sun7i (Allwinner A20)" @@ -111,6 +112,10 @@ config TARGET_MELE_M3 bool "MELE_M3" depends on MACH_SUN7I +config TARGET_MELE_M9 + bool "MELE_M9" + depends on MACH_SUN6I + config TARGET_MINI_X_1GB bool "MINI_X_1GB" depends on MACH_SUN4I @@ -192,4 +197,20 @@ config MMC_SUNXI_SLOT_EXTRA slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. +config USB1_VBUS_PIN + string "Vbus enable pin for usb1 (ehci0)" + default "PH6" if MACH_SUN4I || MACH_SUN7I + default "PH27" if MACH_SUN6I + ---help--- + Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes + a string in the format understood by sunxi_name_to_gpio, e.g. + PH1 for pin 1 of port H. + +config USB2_VBUS_PIN + string "Vbus enable pin for usb2 (ehci1)" + default "PH3" if MACH_SUN4I || MACH_SUN7I + default "PH24" if MACH_SUN6I + ---help--- + See USB1_VBUS_PIN help text. + endif diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index b3c77a83cb..ca0300272e 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -9,6 +9,7 @@ F: configs/Cubieboard_defconfig F: configs/Mele_A1000_defconfig F: configs/Mele_A1000G_defconfig F: configs/Mele_M3_defconfig +F: configs/Mele_M9_defconfig F: configs/Mini-X_defconfig F: configs/Mini-X-1Gb_defconfig F: include/configs/sun5i.h diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 03890c8c9c..e6ec5b8fc1 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -19,6 +19,9 @@ #ifdef CONFIG_AXP209_POWER #include <axp209.h> #endif +#ifdef CONFIG_AXP221_POWER +#include <axp221.h> +#endif #include <asm/arch/clock.h> #include <asm/arch/cpu.h> #include <asm/arch/dram.h> @@ -169,6 +172,29 @@ void sunxi_board_init(void) power_failed |= axp209_set_ldo3(2800); power_failed |= axp209_set_ldo4(2800); #endif +#ifdef CONFIG_AXP221_POWER + power_failed = axp221_init(); + power_failed |= axp221_set_dcdc1(3000); + power_failed |= axp221_set_dcdc2(1200); + power_failed |= axp221_set_dcdc3(1200); + power_failed |= axp221_set_dcdc4(1200); + power_failed |= axp221_set_dcdc5(1500); +#if CONFIG_AXP221_DLDO1_VOLT != -1 + power_failed |= axp221_set_dldo1(CONFIG_AXP221_DLDO1_VOLT); +#endif +#if CONFIG_AXP221_DLDO4_VOLT != -1 + power_failed |= axp221_set_dldo4(CONFIG_AXP221_DLDO4_VOLT); +#endif +#if CONFIG_AXP221_ALDO1_VOLT != -1 + power_failed |= axp221_set_aldo1(CONFIG_AXP221_ALDO1_VOLT); +#endif +#if CONFIG_AXP221_ALDO2_VOLT != -1 + power_failed |= axp221_set_aldo2(CONFIG_AXP221_ALDO2_VOLT); +#endif +#if CONFIG_AXP221_ALDO3_VOLT != -1 + power_failed |= axp221_set_aldo3(CONFIG_AXP221_ALDO3_VOLT); +#endif +#endif printf("DRAM:"); ramsize = sunxi_dram_init(); diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 6348d27282..051aca01a8 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -29,7 +29,7 @@ int sunxi_gmac_initialize(bd_t *bis) * need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" * of the GMAC clk register to 3. */ -#ifdef CONFIG_BANANAPI +#ifdef CONFIG_TARGET_BANANAPI setbits_le32(&ccm->gmac_clk_cfg, 0x3 << 10); #endif |