diff options
Diffstat (limited to 'board')
227 files changed, 4654 insertions, 4280 deletions
diff --git a/board/Barix/ipam390/u-boot-spl-ipam390.lds b/board/Barix/ipam390/u-boot-spl-ipam390.lds index 5480d1f276..8604696be7 100644 --- a/board/Barix/ipam390/u-boot-spl-ipam390.lds +++ b/board/Barix/ipam390/u-boot-spl-ipam390.lds @@ -49,5 +49,9 @@ SECTIONS } >.sram __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } >.sram } diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h new file mode 100644 index 0000000000..15225b0724 --- /dev/null +++ b/board/BuR/common/bur_common.h @@ -0,0 +1,22 @@ +/* + * bur_comon.h + * + * common board information header for B&R boards + * + * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BUR_COMMON_H_ +#define _BUR_COMMON_H_ + +void blink(u32 blinks, u32 intervall, u32 pin); +void pmicsetup(u32 mpupll); +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +int board_eth_init(bd_t *bis); + +#endif diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c new file mode 100644 index 0000000000..04f3f1f4b2 --- /dev/null +++ b/board/BuR/common/common.c @@ -0,0 +1,216 @@ +/* + * common.c + * + * common board functions for B&R boards + * + * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <power/tps65217.h> +#include "bur_common.h" + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; +/* --------------------------------------------------------------------------*/ +void blink(u32 blinks, u32 intervall, u32 pin) +{ + gpio_direction_output(pin, 0); + int val = 0; + + do { + val ^= 0x01; + gpio_set_value(pin, val); + mdelay(intervall); + } while (blinks--); + + gpio_set_value(pin, 0); +} +#ifdef CONFIG_SPL_BUILD +void pmicsetup(u32 mpupll) +{ + int mpu_vdd; + int usb_cur_lim; + + /* setup I2C */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + + if (i2c_probe(TPS65217_CHIP_PM)) { + puts("PMIC (0x24) not found! skip further initalization.\n"); + return; + } + + /* Get the frequency which is defined by device fuses */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + printf("detected max. frequency: %d - ", dpll_mpu_opp100.m); + + if (0 != mpupll) { + dpll_mpu_opp100.m = MPUPLL_M_1000; + printf("retuning MPU-PLL to: %d MHz.\n", dpll_mpu_opp100.m); + } else { + puts("ok.\n"); + } + /* + * Increase USB current limit to 1300mA or 1800mA and set + * the MPU voltage controller as needed. + */ + if (dpll_mpu_opp100.m == MPUPLL_M_1000) { + usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; + mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; + } else { + usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; + mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; + } + + if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_POWER_PATH, + usb_cur_lim, TPS65217_USB_INPUT_CUR_LIMIT_MASK)) + puts("tps65217_reg_write failure\n"); + + /* Set DCDC3 (CORE) voltage to 1.125V */ + if (tps65217_voltage_update(TPS65217_DEFDCDC3, + TPS65217_DCDC_VOLT_SEL_1125MV)) { + puts("tps65217_voltage_update failure\n"); + return; + } + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* Set DCDC2 (MPU) voltage */ + if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { + puts("tps65217_voltage_update failure\n"); + return; + } + + /* Set LDO3 to 1.8V */ + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, + TPS65217_DEFLS1, + TPS65217_LDO_VOLTAGE_OUT_1_8, + TPS65217_LDO_MASK)) + puts("tps65217_reg_write failure\n"); + /* Set LDO4 to 3.3V */ + if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, + TPS65217_DEFLS2, + TPS65217_LDO_VOLTAGE_OUT_3_3, + TPS65217_LDO_MASK)) + puts("tps65217_reg_write failure\n"); + + /* Set MPU Frequency to what we detected now that voltages are set */ + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +#endif /* CONFIG_SPL_BUILD */ + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + return; +} + +/* describing port offsets of TI's CPSW block */ +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; +#endif /* CONFIG_DRIVER_TI_CPSW, ... */ + +#if defined(CONFIG_DRIVER_TI_CPSW) + +int board_eth_init(bd_t *bis) +{ + int rv = 0; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC ... "); + + if (is_valid_ether_addr(mac_addr)) { + printf("using: %02X:%02X:%02X:%02X:%02X:%02X.\n", + mac_addr[0], mac_addr[1], mac_addr[2], + mac_addr[3], mac_addr[4], mac_addr[5] + ); + eth_setenv_enetaddr("ethaddr", mac_addr); + } + } + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_MII; + cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; + + rv = cpsw_register(&cpsw_data); + if (rv < 0) { + printf("Error %d registering CPSW switch\n", rv); + return 0; + } +#endif /* CONFIG_DRIVER_TI_CPSW, ... */ + return rv; +} +#endif /* CONFIG_DRIVER_TI_CPSW */ diff --git a/board/BuR/kwb/Makefile b/board/BuR/kwb/Makefile new file mode 100644 index 0000000000..7b04b26ae4 --- /dev/null +++ b/board/BuR/kwb/Makefile @@ -0,0 +1,12 @@ +# +# Makefile +# +# Copyright (C) 2014 Hannes Petermaier <oe5hpm@oevsv.at> - +# Bernecker & Rainer Industrielektronik GmbH - http://www.br-automation.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) += mux.o +obj-y += ../common/common.o +obj-y += board.o diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c new file mode 100644 index 0000000000..8aa16bcf80 --- /dev/null +++ b/board/BuR/kwb/board.c @@ -0,0 +1,240 @@ +/* + * board.c + * + * Board functions for B&R KWB Board + * + * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <power/tps65217.h> +#include "../common/bur_common.h" + +/* -------------------------------------------------------------------------*/ +/* -- defines for used GPIO Hardware -- */ +#define KEY (0+4) +#define LCD_PWR (0+5) +#define PUSH_KEY (0+31) +#define USB2SD_NRST (32+29) +#define USB2SD_PWR (96+13) +/* -------------------------------------------------------------------------*/ +/* -- PSOC Resetcontroller Register defines -- */ + +/* I2C Address of controller */ +#define RSTCTRL_ADDR 0x75 +/* Register for CTRL-word */ +#define RSTCTRL_CTRLREG 0x01 +/* Register for giving some information to VxWorks OS */ +#define RSTCTRL_SCRATCHREG 0x04 + +/* -- defines for RSTCTRL_CTRLREG -- */ +#define RSTCTRL_FORCE_PWR_NEN 0x0404 + +#if defined(CONFIG_SPL_BUILD) +/* TODO: check ram-timing ! */ +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, +}; +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, +}; + +static const struct ctrl_ioregs ddr3_ioregs = { + .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, +}; + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + unsigned int oldspeed; + unsigned short buf; + + struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; + struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; + /* + * enable additional clocks of modules which are accessed later from + * VxWorks OS + */ + u32 *const clk_domains[] = { 0 }; + + u32 *const clk_modules_kwbspecific[] = { + &cmwkup->wkup_adctscctrl, + &cmper->spi1clkctrl, + &cmper->dcan0clkctrl, + &cmper->dcan1clkctrl, + &cmper->epwmss0clkctrl, + &cmper->epwmss1clkctrl, + &cmper->epwmss2clkctrl, + 0 + }; + do_enable_clocks(clk_domains, clk_modules_kwbspecific, 1); + + /* power-OFF LCD-Display */ + gpio_direction_output(LCD_PWR, 0); + + /* setup I2C */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + + /* power-ON 3V3 via Resetcontroller */ + oldspeed = i2c_get_bus_speed(); + if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) { + buf = RSTCTRL_FORCE_PWR_NEN; + i2c_write(RSTCTRL_ADDR, RSTCTRL_CTRLREG, 1, + (uint8_t *)&buf, sizeof(buf)); + i2c_set_bus_speed(oldspeed); + } else { + puts("ERROR: i2c_set_bus_speed failed! (turn on PWR_nEN)\n"); + } + +#if defined(CONFIG_AM335X_USB0) + /* power on USB2SD Controller */ + gpio_direction_output(USB2SD_PWR, 1); + mdelay(1); + /* give a reset Pulse to USB2SD Controller */ + gpio_direction_output(USB2SD_NRST, 0); + mdelay(1); + gpio_set_value(USB2SD_NRST, 1); +#endif + pmicsetup(0); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr3; +} + +void sdram_init(void) +{ + config_ddr(400, &ddr3_ioregs, + &ddr3_data, + &ddr3_cmd_ctrl_data, + &ddr3_emif_reg_data, 0); +} +#endif /* CONFIG_SPL_BUILD */ +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + gpmc_init(); + return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + const unsigned int ton = 250; + const unsigned int toff = 1000; + unsigned int cnt = 3; + unsigned short buf = 0xAAAA; + unsigned int oldspeed; + + tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, + TPS65217_WLEDCTRL2, 0x32, 0xFF); /* 50% dimlevel */ + + if (gpio_get_value(KEY)) { + do { + /* turn on light */ + tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, + TPS65217_WLEDCTRL1, 0x09, 0xFF); + mdelay(ton); + /* turn off light */ + tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, + TPS65217_WLEDCTRL1, 0x01, 0xFF); + mdelay(toff); + cnt--; + if (!gpio_get_value(KEY) && + gpio_get_value(PUSH_KEY) && 1 == cnt) { + puts("updating from USB ...\n"); + setenv("bootcmd", "run usbupdate"); + break; + } else if (!gpio_get_value(KEY)) { + break; + } + } while (cnt); + } + + switch (cnt) { + case 0: + puts("3 blinks ... entering BOOT mode.\n"); + buf = 0x0000; + break; + case 1: + puts("2 blinks ... entering DIAGNOSE mode.\n"); + buf = 0x0F0F; + break; + case 2: + puts("1 blinks ... entering SERVICE mode.\n"); + buf = 0xB4B4; + break; + case 3: + puts("0 blinks ... entering RUN mode.\n"); + buf = 0x0404; + break; + } + mdelay(ton); + /* turn on light */ + tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, + TPS65217_WLEDCTRL1, 0x09, 0xFF); + /* write bootinfo into scratchregister of resetcontroller */ + oldspeed = i2c_get_bus_speed(); + if (0 != i2c_set_bus_speed(CONFIG_SYS_OMAP24_I2C_SPEED_PSOC)) { + i2c_write(RSTCTRL_ADDR, RSTCTRL_SCRATCHREG, 1, + (uint8_t *)&buf, sizeof(buf)); + i2c_set_bus_speed(oldspeed); + } else { + puts("ERROR: i2c_set_bus_speed failed! (scratchregister)\n"); + } + /* + * reset VBAR registers to its reset location, VxWorks 6.9.3.2 does + * expect that vectors are there, original u-boot moves them to _start + */ + __asm__("ldr r0,=0x20000"); + __asm__("mcr p15, 0, r0, c12, c0, 0"); /* Set VBAR */ + + return 0; +} +#endif /* CONFIG_BOARD_LATE_INIT */ diff --git a/board/BuR/kwb/mux.c b/board/BuR/kwb/mux.c new file mode 100644 index 0000000000..1a5ffd5709 --- /dev/null +++ b/board/BuR/kwb/mux.c @@ -0,0 +1,195 @@ +/* + * mux.c + * + * Pinmux Setting for B&R LEIT Board(s) + * + * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> + +static struct module_pin_mux usb0_pin_mux[] = { + {OFFSET(usb0_id), (MODE(0) | RXACTIVE)}, + /* USB0 DrvBus Receiver disable (from romcode 0x20) */ + {OFFSET(usb0_drvvbus), (MODE(0))}, + /* USB1 DrvBus as GPIO due to HW-Workaround */ + {OFFSET(usb1_drvvbus), (MODE(7))}, + {-1}, +}; +static struct module_pin_mux spi1_pin_mux[] = { + /* SPI1_SCLK */ + {OFFSET(mcasp0_aclkx), MODE(3) | PULLUDEN | RXACTIVE}, + /* SPI1_D0 */ + {OFFSET(mcasp0_fsx), MODE(3) | PULLUDEN | RXACTIVE}, + /* SPI1_D1 */ + {OFFSET(mcasp0_axr0), MODE(3) | PULLUDEN | RXACTIVE}, + /* SPI1_CS0 */ + {OFFSET(mcasp0_ahclkr), MODE(3) | PULLUDEN | PULLUP_EN | RXACTIVE}, + {-1}, +}; + +static struct module_pin_mux dcan0_pin_mux[] = { + /* DCAN0 TX */ + {OFFSET(uart1_ctsn), MODE(2) | PULLUDEN | PULLUP_EN}, + /* DCAN0 RX */ + {OFFSET(uart1_rtsn), MODE(2) | RXACTIVE}, + {-1}, +}; + +static struct module_pin_mux dcan1_pin_mux[] = { + /* DCAN1 TX */ + {OFFSET(uart1_rxd), MODE(2) | PULLUDEN | PULLUP_EN}, + /* DCAN1 RX */ + {OFFSET(uart1_txd), MODE(2) | RXACTIVE}, + {-1}, +}; + +static struct module_pin_mux gpios[] = { + /* GPIO0_29 (RMII1_REFCLK) - eMMC nRST */ + {OFFSET(rmii1_refclk), (MODE(7) | PULLUDDIS)}, + /* GPIO0_4 (SPI D1) - TA602 */ + {OFFSET(spi0_d1), (MODE(7) | PULLUDDIS | RXACTIVE)}, + /* GPIO0_5 (SPI CS0) - DISPLAY_ON_OFF */ + {OFFSET(spi0_cs0), (MODE(7) | PULLUDDIS)}, + /* GPIO0_7 (PWW0 OUT) - CAN TERM */ + {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDDIS | RXACTIVE)}, + /* GPIO0_19 (DMA_INTR0) - CLKOUT SYS */ + {OFFSET(xdma_event_intr0), (MODE(7) | RXACTIVE)}, + /* GPIO0_20 (DMA_INTR1) - SPI1 nCS1 */ + {OFFSET(xdma_event_intr1), (MODE(7) | PULLUDEN | PULLUP_EN)}, + /* GPIO0_30 (GPMC_WAIT0) - TA601 */ + {OFFSET(gpmc_wait0), (MODE(7) | PULLUDDIS | RXACTIVE)}, + /* GPIO0_31 (GPMC_nWP) - SW601 PushButton */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUDDIS | RXACTIVE)}, + /* GPIO1_28 (GPMC_nWE) - FRAM_nWP */ + {OFFSET(gpmc_be1n), (MODE(7) | PULLUDDIS)}, + /* GPIO2_0 (GPMC_nCS3) - VBAT_OK */ + {OFFSET(gpmc_csn3), (MODE(7) | PULLUDDIS | RXACTIVE) }, + /* GPIO2_2 (GPMC_nADV_ALE) - DCOK */ + {OFFSET(gpmc_advn_ale), (MODE(7) | PULLUDDIS | RXACTIVE)}, + /* GPIO2_4 (GPMC_nWE) - TST_BAST */ + {OFFSET(gpmc_wen), (MODE(7) | PULLUDDIS)}, + /* GPIO3_18 (MCASP0_ACLKR) - SW601 CNTup, mapped to Counter eQEB0A_in */ + {OFFSET(mcasp0_aclkr), (MODE(1) | PULLUDDIS | RXACTIVE)}, + /* GPIO3_19 (MCASP0_FSR) - SW601 CNTdown, mapped to Counter eQEB0B_in */ + {OFFSET(mcasp0_fsr), (MODE(1) | PULLUDDIS | RXACTIVE)}, + /* GPIO3_20 (MCASP0_AXR1) - SW601 CNTdown, map to Counter eQEB0_index */ + {OFFSET(mcasp0_axr1), (MODE(1) | PULLUDDIS | RXACTIVE)}, + {-1}, +}; + +static struct module_pin_mux uart0_pin_mux[] = { + /* UART0_CTS */ + {OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* UART0_RXD */ + {OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* UART0_TXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + /* I2C_DATA */ + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + /* I2C_SCLK */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux mii1_pin_mux[] = { + {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ + {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ + {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ + {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ + {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ + {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ + {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ + {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ + {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ + {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ + {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ + {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ + {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux mmc1_pin_mux[] = { + {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ + {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ + {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ + {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ + {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */ + {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ + {OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */ + {OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */ + + {-1}, +}; + +static struct module_pin_mux lcd_pin_mux[] = { + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD-Data(0) */ + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD-Data(1) */ + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD-Data(2) */ + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD-Data(3) */ + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD-Data(4) */ + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD-Data(5) */ + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD-Data(6) */ + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD-Data(7) */ + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD-Data(8) */ + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD-Data(9) */ + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD-Data(10) */ + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD-Data(11) */ + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD-Data(12) */ + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD-Data(13) */ + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD-Data(14) */ + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD-Data(15) */ + + {OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)}, /* LCD-Data(16) */ + {OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)}, /* LCD-Data(17) */ + {OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)}, /* LCD-Data(18) */ + {OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)}, /* LCD-Data(19) */ + {OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)}, /* LCD-Data(20) */ + {OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)}, /* LCD-Data(21) */ + {OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)}, /* LCD-Data(22) */ + {OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)}, /* LCD-Data(23) */ + + {OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)}, /* LCD-VSync */ + {OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)}, /* LCD-HSync */ + {OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */ + {OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)}, /* LCD-CLK */ + + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(usb0_pin_mux); + configure_module_pin_mux(spi1_pin_mux); + configure_module_pin_mux(dcan0_pin_mux); + configure_module_pin_mux(dcan1_pin_mux); + configure_module_pin_mux(mmc1_pin_mux); + configure_module_pin_mux(lcd_pin_mux); + configure_module_pin_mux(gpios); +} diff --git a/board/BuR/tseries/Makefile b/board/BuR/tseries/Makefile new file mode 100644 index 0000000000..ec0d27a7aa --- /dev/null +++ b/board/BuR/tseries/Makefile @@ -0,0 +1,14 @@ +# +# Makefile +# +# Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> +# Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifeq ($(CONFIG_SPL_BUILD),y) +obj-y := mux.o +endif +obj-y += ../common/common.o +obj-y += board.o diff --git a/board/BuR/tseries/board.c b/board/BuR/tseries/board.c new file mode 100644 index 0000000000..f0510e599e --- /dev/null +++ b/board/BuR/tseries/board.c @@ -0,0 +1,147 @@ +/* + * board.c + * + * Board functions for B&R LEIT Board + * + * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <power/tps65217.h> +#include "../common/bur_common.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* --------------------------------------------------------------------------*/ +/* -- defines for GPIO -- */ +#define ETHLED_ORANGE (96+16) /* GPIO3_16 */ +#define REPSWITCH (0+20) /* GPIO0_20 */ + + +#if defined(CONFIG_SPL_BUILD) +/* TODO: check ram-timing ! */ +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, +}; + +static const struct ctrl_ioregs ddr3_ioregs = { + .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, + .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, +}; + +#ifdef CONFIG_SPL_OS_BOOT +/* + * called from spl_nand.c + * return 0 for loading linux, return 1 for loading u-boot + */ +int spl_start_uboot(void) +{ + if (0 == gpio_get_value(REPSWITCH)) { + blink(5, 125, ETHLED_ORANGE); + mdelay(1000); + printf("SPL: entering u-boot instead kernel image.\n"); + return 1; + } + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + +#define OSC (V_OSCK/1000000) +static const struct dpll_params dpll_ddr3 = { 400, OSC-1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + pmicsetup(1000); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr3; +} + +void sdram_init(void) +{ + config_ddr(400, &ddr3_ioregs, + &ddr3_data, + &ddr3_cmd_ctrl_data, + &ddr3_emif_reg_data, 0); +} +#endif /* CONFIG_SPL_BUILD */ + +/* Basic board specific setup. Pinmux has been handled already. */ +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + gpmc_init(); + return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + gpio_direction_output(ETHLED_ORANGE, 0); + + if (0 == gpio_get_value(REPSWITCH)) { + printf("\n\n\n" + "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n" + "!!!!!!! recovery switch activated !!!!!!!\n" + "!!!!!!! running usbupdate !!!!!!!\n" + "!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n\n\n"); + setenv("bootcmd", "sleep 2; run netupdate;"); + } + + printf("turning on display power+backlight ... "); + tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL1, + 0x09, TPS65217_MASK_ALL_BITS); /* 200 Hz, ON */ + tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL2, + 0x62, TPS65217_MASK_ALL_BITS); /* 100% */ + printf("ok.\n"); + + return 0; +} +#endif /* CONFIG_BOARD_LATE_INIT */ diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c new file mode 100644 index 0000000000..3c76e96926 --- /dev/null +++ b/board/BuR/tseries/mux.c @@ -0,0 +1,225 @@ +/* + * mux.c + * + * Pinmux Setting for B&R LEIT Board(s) + * + * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at> + * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> + +static struct module_pin_mux uart0_pin_mux[] = { + /* UART0_CTS */ + {OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* UART0_RXD */ + {OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* UART0_TXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, + {-1}, +}; +#ifdef CONFIG_MMC +static struct module_pin_mux mmc1_pin_mux[] = { + {OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ + {OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ + {OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ + {OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ + {OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */ + {OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ + {OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */ + {OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */ + {-1}, +}; +#endif +static struct module_pin_mux i2c0_pin_mux[] = { + /* I2C_DATA */ + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + /* I2C_SCLK */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux spi0_pin_mux[] = { + /* SPI0_SCLK */ + {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)}, + /* SPI0_D0 */ + {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)}, + /* SPI0_D1 */ + {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)}, + /* SPI0_CS0 */ + {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux mii1_pin_mux[] = { + {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ + {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ + {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ + {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ + {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ + {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ + {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ + {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ + {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ + {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ + {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ + {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ + {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux mii2_pin_mux[] = { + {OFFSET(gpmc_a0), MODE(1)}, /* MII2_TXEN */ + {OFFSET(gpmc_a1), MODE(1) | RXACTIVE}, /* MII2_RXDV */ + {OFFSET(gpmc_a2), MODE(1)}, /* MII2_TXD3 */ + {OFFSET(gpmc_a3), MODE(1)}, /* MII2_TXD2 */ + {OFFSET(gpmc_a4), MODE(1)}, /* MII2_TXD1 */ + {OFFSET(gpmc_a5), MODE(1)}, /* MII2_TXD0 */ + {OFFSET(gpmc_a6), MODE(1) | RXACTIVE}, /* MII2_TXCLK */ + {OFFSET(gpmc_a7), MODE(1) | RXACTIVE}, /* MII2_RXCLK */ + {OFFSET(gpmc_a8), MODE(1) | RXACTIVE}, /* MII2_RXD3 */ + {OFFSET(gpmc_a9), MODE(1) | RXACTIVE}, /* MII2_RXD2 */ + {OFFSET(gpmc_a10), MODE(1) | RXACTIVE}, /* MII2_RXD1 */ + {OFFSET(gpmc_a11), MODE(1) | RXACTIVE}, /* MII2_RXD0 */ + {OFFSET(gpmc_wpn), (MODE(1) | RXACTIVE)},/* MII2_RXERR */ + /* + * MII2_CRS is shared with + * NAND_WAIT0 + */ + {OFFSET(gpmc_be1n), (MODE(1) | RXACTIVE)},/* MII1_COL */ + {-1}, +}; +#ifdef CONFIG_NAND +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; +#endif +static struct module_pin_mux gpIOs[] = { + /* GPIO0_6 (SPI0_CS1) - 3v3_PWR_nEN (Display Power Supply) */ + {OFFSET(spi0_cs1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* TIMER5 (MMC0_DAT3) - TIMER5 (Buzzer) */ + {OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)}, + /* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3, later used as MODE3 for PWM */ + {OFFSET(mmc0_dat2), (MODE(7) | PULLUDEN | RXACTIVE)}, + /* GPIO2_28 (MMC0_DAT1) - MII_nNAND */ + {OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)}, + /* GPIO2_29 (MMC0_DAT0) - NAND_1n0 */ + {OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)}, + /* GPIO2_30 (MMC0_CLK) - nRESET (PHY) */ + {OFFSET(mmc0_clk), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* GPIO3_18 (MCASP0_ACLKR) - CPLD JTAG TDI */ + {OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* GPIO3_19 (MCASP0_FSR) - CPLD JTAG TMS */ + {OFFSET(mcasp0_fsr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* GPIO3_20 (MCASP0_AXR1) - CPLD JTAG TCK */ + {OFFSET(mcasp0_axr1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* GPIO3_21 (MCASP0_AHCLKX) - CPLD JTAG TDO */ + {OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* GPIO2_0 (GPMC_nCS3) - DCOK */ + {OFFSET(gpmc_csn3), (MODE(7) | PULLUDDIS | RXACTIVE) }, + /* GPIO0_29 (RMII1_REFCLK) - eMMC nRST */ + {OFFSET(rmii1_refclk), (MODE(7) | PULLUDDIS | RXACTIVE) }, + /* + * GPIO0_7 (PWW0 OUT) + * DISPLAY_ONOFF (Backlight Enable at LVDS Versions) + */ + {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN | RXACTIVE)}, + /* GPIO0_19 (DMA_INTR0) - ISPLAY_MODE (CPLD) */ + {OFFSET(xdma_event_intr0), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, + /* GPIO0_20 (DMA_INTR1) - REP-Switch */ + {OFFSET(xdma_event_intr1), (MODE(7) | PULLUP_EN | RXACTIVE)}, + /* GPIO3_14 (MCASP0_ACLKX) - frei / PP709 */ + {OFFSET(mcasp0_aclkx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE) }, + /* GPIO3_15 (MCASP0_FSX) - PMIC_nRESET */ + {OFFSET(mcasp0_fsx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE) }, + /* GPIO3_16 (MCASP0_AXR0) - ETH1_LEDY */ + {OFFSET(mcasp0_axr0), (MODE(7) | PULLUDDIS) }, + /* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */ + {OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) }, + + {-1}, +}; + +static struct module_pin_mux lcd_pin_mux[] = { + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD-Data(0) */ + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD-Data(1) */ + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD-Data(2) */ + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD-Data(3) */ + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD-Data(4) */ + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD-Data(5) */ + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD-Data(6) */ + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD-Data(7) */ + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD-Data(8) */ + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD-Data(9) */ + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD-Data(10) */ + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD-Data(11) */ + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD-Data(12) */ + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD-Data(13) */ + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD-Data(14) */ + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD-Data(15) */ + + {OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)}, /* LCD-Data(16) */ + {OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)}, /* LCD-Data(17) */ + {OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)}, /* LCD-Data(18) */ + {OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)}, /* LCD-Data(19) */ + {OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)}, /* LCD-Data(20) */ + {OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)}, /* LCD-Data(21) */ + {OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)}, /* LCD-Data(22) */ + {OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)}, /* LCD-Data(23) */ + + {OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)}, /* LCD-VSync */ + {OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)}, /* LCD-HSync */ + {OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */ + {OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)}, /* LCD-CLK */ + + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mii2_pin_mux); +#ifdef CONFIG_NAND + configure_module_pin_mux(nand_pin_mux); +#elif defined(CONFIG_MMC) + configure_module_pin_mux(mmc1_pin_mux); +#endif + configure_module_pin_mux(spi0_pin_mux); + configure_module_pin_mux(lcd_pin_mux); + configure_module_pin_mux(gpIOs); +} diff --git a/board/actux1/Makefile b/board/actux1/Makefile deleted file mode 100644 index 05a8669113..0000000000 --- a/board/actux1/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux1.o diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c deleted file mode 100644 index 03ccd936b4..0000000000 --- a/board/actux1/actux1.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#include <asm/arch/ixp425pci.h> -#endif - -#include "actux1_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS5: Debug port */ - writel(0x9d520003, IXP425_EXP_CS5); - /* CS6: HwRel */ - writel(0x81860001, IXP425_EXP_CS6); - /* CS7: LEDs */ - writel(0x80900003, IXP425_EXP_CS7); - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - - /* Setup GPIOs for PCI INTA */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA); - - /* Setup GPIOs for 33MHz clock output */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x011001FF, IXP425_GPIO_GPCLKR); - - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - - ACTUX1_LED1(2); - ACTUX1_LED2(2); - ACTUX1_LED3(0); - ACTUX1_LED4(0); - ACTUX1_LED5(0); - ACTUX1_LED6(0); - ACTUX1_LED7(0); - - ACTUX1_HS(ACTUX1_HS_DCD); - - return 0; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: AcTux-1 rev."); - putc(ACTUX1_BOARDREL + 'A' - 1); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = reserved - * 1 = Rev. A - * 2 = Rev. B - *************************************************************************/ -u32 get_board_rev(void) -{ - return ACTUX1_BOARDREL; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - - -#ifdef CONFIG_PCI -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_ixp_init(&hose); -} -#endif - -void reset_phy(void) -{ - u16 id1, id2; - - /* initialize the PHY */ - miiphy_reset("NPE0", CONFIG_PHY_ADDR); - - miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1); - miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2); - - id2 &= 0xFFF0; /* mask out revision bits */ - - if (id1 == 0x13 && id2 == 0x78e0) { - /* - * LXT971/LXT972 PHY: set LED outputs: - * LED1(green) = Link/ACT, - * LED2 (unused) = LINK, - * LED3(red) = Coll - */ - miiphy_write("NPE0", CONFIG_PHY_ADDR, 20, 0xD432); - } else if (id1 == 0x143 && id2 == 0xbc30) { - /* BCM5241: default values are OK */ - } else - printf("unknown ethernet PHY ID: %x %x\n", id1, id2); -} diff --git a/board/actux1/actux1_hw.h b/board/actux1/actux1_hw.h deleted file mode 100644 index 5627f24796..0000000000 --- a/board/actux1/actux1_hw.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-1 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX1_HW_H -#define _ACTUX1_HW_H - -/* 0 = LED off,1 = green, 2 = red, 3 = orange */ -#define ACTUX1_LED1(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) -#define ACTUX1_LED2(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) -#define ACTUX1_LED3(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) -#define ACTUX1_LED4(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 3) -#define ACTUX1_LED5(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 4) -#define ACTUX1_LED6(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 5) -#define ACTUX1_LED7(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) -#define ACTUX1_HS(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) -#define ACTUX1_HS_DCD 0x01 -#define ACTUX1_HS_DSR 0x02 - -#define ACTUX1_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS -#define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) - -/* GPIO settings */ -#define CONFIG_SYS_GPIO_PCI1_INTA 2 -#define CONFIG_SYS_GPIO_PCI2_INTA 3 -#define CONFIG_SYS_GPIO_I2C_SDA 4 -#define CONFIG_SYS_GPIO_I2C_SCL 5 -#define CONFIG_SYS_GPIO_DBGJUMPER 9 -#define CONFIG_SYS_GPIO_BUTTON1 10 -#define CONFIG_SYS_GPIO_DBGSENSE 11 -#define CONFIG_SYS_GPIO_DTR 12 -#define CONFIG_SYS_GPIO_IORST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds deleted file mode 100644 index 4716e4f0e0..0000000000 --- a/board/actux1/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/actux1/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/input/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN(4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN(4); - .data : { - *(.data*) - } - . = ALIGN(4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/actux2/Makefile b/board/actux2/Makefile deleted file mode 100644 index 24cbff1b47..0000000000 --- a/board/actux2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux2.o diff --git a/board/actux2/actux2.c b/board/actux2/actux2.c deleted file mode 100644 index e578cd0996..0000000000 --- a/board/actux2/actux2.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> - -#include <miiphy.h> - -#include "actux2_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS1: IPAC-X */ - writel(0x94d10013, IXP425_EXP_CS1); - /* CS5: Debug port */ - writel(0x9d520003, IXP425_EXP_CS5); - /* CS6: HW release register */ - writel(0x81860001, IXP425_EXP_CS6); - /* CS7: LEDs */ - writel(0x80900003, IXP425_EXP_CS7); - - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD); - - /* Setup GPIOs for Interrupt inputs */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT); - - /* Setup GPIOs for 33MHz clock output */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x011001FF, IXP425_GPIO_GPCLKR); - - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST); - - ACTUX2_LED1(1); - ACTUX2_LED2(0); - ACTUX2_LED3(0); - ACTUX2_LED4(0); - - return 0; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: AcTux-2 rev."); - putc(ACTUX2_BOARDREL + 'A' - 1); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - putc('\n'); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = reserved - * 1 = Rev. A - * 2 = Rev. B - *************************************************************************/ -u32 get_board_rev(void) -{ - return ACTUX2_BOARDREL; -} - -void reset_phy(void) -{ - /* init IcPlus IP175C ethernet switch to native IP175C mode */ - miiphy_write("NPE0", 29, 31, 0x175C); -} diff --git a/board/actux2/actux2_hw.h b/board/actux2/actux2_hw.h deleted file mode 100644 index 57c6fa7076..0000000000 --- a/board/actux2/actux2_hw.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-2 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX2_HW_H -#define _ACTUX2_HW_H - -/* 0 = LED off,1 = green, 2 = red, 3 = orange */ -#define ACTUX2_LED1(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) -#define ACTUX2_LED2(a) writeb((a ? 2 : 0), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) -#define ACTUX2_LED3(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) -#define ACTUX2_LED4(a) writeb((a ? 0 : 2), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) - -#define ACTUX2_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS -#define ACTUX2_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) -#define ACTUX2_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPIO_DBGINT 0 -#define CONFIG_SYS_GPIO_ETHINT 1 -#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */ -#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */ -#define CONFIG_SYS_GPIO_UNUSED4 4 -#define CONFIG_SYS_GPIO_UNUSED5 5 -#define CONFIG_SYS_GPIO_DSR 6 /* Out */ -#define CONFIG_SYS_GPIO_DCD 7 /* Out */ -#define CONFIG_SYS_GPIO_IPAC_INT 8 -#define CONFIG_SYS_GPIO_DBGJUMPER 9 -#define CONFIG_SYS_GPIO_BUTTON1 10 -#define CONFIG_SYS_GPIO_DBGSENSE 11 -#define CONFIG_SYS_GPIO_DTR 12 -#define CONFIG_SYS_GPIO_IORST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds deleted file mode 100644 index f00d7c72b1..0000000000 --- a/board/actux2/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/actux2/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/input/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN(4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN(4); - .data : { - *(.data*) - } - . = ALIGN(4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/actux3/Makefile b/board/actux3/Makefile deleted file mode 100644 index f628f26449..0000000000 --- a/board/actux3/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux3.o diff --git a/board/actux3/actux3.c b/board/actux3/actux3.c deleted file mode 100644 index 09c803ccd4..0000000000 --- a/board/actux3/actux3.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#include "actux3_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS1: IPAC-X */ - writel(0x94d10013, IXP425_EXP_CS1); - /* CS5: Debug port */ - writel(0x9d520003, IXP425_EXP_CS5); - /* CS6: Release/Option register */ - writel(0x81860001, IXP425_EXP_CS6); - /* CS7: LEDs */ - writel(0x80900003, IXP425_EXP_CS7); - - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED5_GN); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_RT); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED6_GN); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED5_GN); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_RT); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_LED6_GN); - - /* - * Setup GPIO's for Interrupt inputs - */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT); - - /* - * Setup GPIO's for 33MHz clock output - */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x011001FF, IXP425_GPIO_GPCLKR); - - /* we need a minimum PCI reset pulse width after enabling the clock */ - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST); - - ACTUX3_LED1_RT(1); - ACTUX3_LED1_GN(0); - ACTUX3_LED2_RT(0); - ACTUX3_LED2_GN(0); - ACTUX3_LED3_RT(0); - ACTUX3_LED3_GN(0); - ACTUX3_LED4_GN(0); - ACTUX3_LED5_RT(0); - - return 0; -} - -/* - * Check Board Identity - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts("Board: AcTux-3 rev."); - putc(ACTUX3_BOARDREL + 'A' - 1); - - if (i > 0) { - puts (", serial# "); - puts (buf); - } - putc('\n'); - - return 0; -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = reserved - * 1 = Rev. A - * 2 = Rev. B - *************************************************************************/ -u32 get_board_rev(void) -{ - return ACTUX3_BOARDREL; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -void reset_phy(void) -{ - int i; - - /* initialize the PHY */ - miiphy_reset("NPE0", CONFIG_PHY_ADDR); - - /* all LED outputs = Link/Act */ - miiphy_write("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA); - - /* - * The Marvell 88E6060 switch comes up with all ports disabled. - * set all ethernet switch ports to forwarding state - */ - for (i = 1; i <= 5; i++) - miiphy_write("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03); - -} diff --git a/board/actux3/actux3_hw.h b/board/actux3/actux3_hw.h deleted file mode 100644 index f8acb4d060..0000000000 --- a/board/actux3/actux3_hw.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-3 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX3_HW_H -#define _ACTUX3_HW_H - -/* 0 = LED off,1 = ON */ -#define ACTUX3_LED1_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) -#define ACTUX3_LED1_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) -#define ACTUX3_LED2_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) -#define ACTUX3_LED2_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 3) -#define ACTUX3_LED3_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 4) -#define ACTUX3_LED3_GN(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 5) -#define ACTUX3_LED4_GN(a) writeb((a)^1, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) -#define ACTUX3_LED5_RT(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) - -#define ACTUX3_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS -#define ACTUX3_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) -#define ACTUX3_OPTION (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0xF0) - -/* GPIO settings */ -#define CONFIG_SYS_GPIO_DBGINT 0 -#define CONFIG_SYS_GPIO_ETHINT 1 -#define CONFIG_SYS_GPIO_ETHRST 2 /* Out */ -#define CONFIG_SYS_GPIO_LED5_GN 3 /* Out */ -#define CONFIG_SYS_GPIO_LED6_RT 4 /* Out */ -#define CONFIG_SYS_GPIO_LED6_GN 5 /* Out */ -#define CONFIG_SYS_GPIO_DSR 6 /* Out */ -#define CONFIG_SYS_GPIO_DCD 7 /* Out */ -#define CONFIG_SYS_GPIO_DBGJUMPER 9 -#define CONFIG_SYS_GPIO_BUTTON1 10 -#define CONFIG_SYS_GPIO_DBGSENSE 11 -#define CONFIG_SYS_GPIO_DTR 12 -#define CONFIG_SYS_GPIO_IORST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds deleted file mode 100644 index 2de3ca60b5..0000000000 --- a/board/actux3/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/actux3/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/input/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN(4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN(4); - .data : { - *(.data*) - } - . = ALIGN(4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/actux4/Makefile b/board/actux4/Makefile deleted file mode 100644 index b949b608c6..0000000000 --- a/board/actux4/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := actux4.o diff --git a/board/actux4/actux4.c b/board/actux4/actux4.c deleted file mode 100644 index 81c545884e..0000000000 --- a/board/actux4/actux4.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * (C) Copyright 2006 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#include <asm/arch/ixp425pci.h> -#endif - -#include "actux4_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - writel(0xbd113c42, IXP425_EXP_CS1); - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_nPWRON); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_nPWRON); - - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST); - - /* led not populated on board*/ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED3); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED3); - - /* middle LED */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED2); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED2); - - /* right LED */ - /* weak pulldown = LED weak on */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_LED1); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED1); - - /* Setup GPIO's for Interrupt inputs */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTA); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTB); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTC); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RTCINT); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB); - - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTA); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTB); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTC); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RTCINT); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA); - GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB); - - /* Setup GPIO's for 33MHz clock output */ - writel(0x011001FF, IXP425_GPIO_GPCLKR); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - - udelay(10000); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - udelay(10000); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST); - udelay(10000); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST); - - return 0; -} - -/* Check Board Identity */ -int checkboard(void) -{ - puts("Board: AcTux-4\n"); - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -#ifdef CONFIG_PCI -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_ixp_init(&hose); -} -#endif - -/* - * Hardcoded flash setup: - * Flash 0 is a non-CFI SST 39VF020 flash, 8 bit flash / 8 bit bus. - * Flash 1 is an Intel *16 flash using the CFI driver. - */ -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - if (banknum == 0) { /* non-CFI boot flash */ - info->portwidth = 1; - info->chipwidth = 1; - info->interface = FLASH_CFI_X8; - return 1; - } else - return 0; -} diff --git a/board/actux4/actux4_hw.h b/board/actux4/actux4_hw.h deleted file mode 100644 index b936376de9..0000000000 --- a/board/actux4/actux4_hw.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * (C) Copyright 2007 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the AcTux-4 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _ACTUX4_HW_H -#define _ACTUX4_HW_H - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPIO_USBINTA 0 -#define CONFIG_SYS_GPIO_USBINTB 1 -#define CONFIG_SYS_GPIO_USBINTC 2 -#define CONFIG_SYS_GPIO_nPWRON 3 /* Out */ -#define CONFIG_SYS_GPIO_I2C_SCL 4 -#define CONFIG_SYS_GPIO_I2C_SDA 5 -#define CONFIG_SYS_GPIO_PCI_INTB 6 -#define CONFIG_SYS_GPIO_BUTTON1 7 -#define CONFIG_SYS_GPIO_LED1 8 /* Out */ -#define CONFIG_SYS_GPIO_RTCINT 9 -#define CONFIG_SYS_GPIO_LED2 10 /* Out */ -#define CONFIG_SYS_GPIO_PCI_INTA 11 -#define CONFIG_SYS_GPIO_IORST 12 /* Out */ -#define CONFIG_SYS_GPIO_LED3 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#endif diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk index d7e7894831..c7cfacacba 100644 --- a/board/ait/cam_enc_4xx/config.mk +++ b/board/ait/cam_enc_4xx/config.mk @@ -9,7 +9,7 @@ UBL_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/ublimage.cfg ifndef CONFIG_SPL_BUILD -ALL-y += $(obj)u-boot.ubl +ALL-y += u-boot.ubl else # as SPL_TEXT_BASE is not page-aligned, we need for some # linkers the -n flag (Do not page align data), to prevent diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index fdfbfc38a9..c0d09adf7c 100644 --- a/board/ait/cam_enc_4xx/u-boot-spl.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -48,5 +48,9 @@ SECTIONS } >.sram __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } } diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c index aa126d71bc..5ab9471246 100644 --- a/board/altera/nios2-generic/nios2-generic.c +++ b/board/altera/nios2-generic/nios2-generic.c @@ -16,7 +16,8 @@ void text_base_hook(void); /* nop hook for text_base.S */ -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \ + defined(CONFIG_CFI_FLASH_MTD) static void __early_flash_cmd_reset(void) { /* reset flash before we read env */ @@ -37,7 +38,8 @@ int board_early_init_f(void) "led"); #endif #endif -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) +#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) && \ + defined(CONFIG_CFI_FLASH_MTD) early_flash_cmd_reset(); #endif return 0; diff --git a/board/altera/socfpga/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c index 576066bef1..a960eb6002 100644 --- a/board/altera/socfpga/socfpga_cyclone5.c +++ b/board/altera/socfpga/socfpga_cyclone5.c @@ -12,6 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_DISPLAY_CPUINFO) /* * Print CPU information */ @@ -20,6 +21,7 @@ int print_cpuinfo(void) puts("CPU : Altera SOCFPGA Platform\n"); return 0; } +#endif /* * Print Board information diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S index 389d5e9083..0fb42adc6f 100644 --- a/board/armltd/integrator/lowlevel_init.S +++ b/board/armltd/integrator/lowlevel_init.S @@ -183,7 +183,7 @@ cm_remap: /* Now 0x00000000 is writeable, replace the vectors */ ldr r0, =_start /* r0 <- start of vectors */ - ldr r2, =_TEXT_BASE /* r2 <- past vectors */ + add r2, r0, #64 /* r2 <- past vectors */ sub r1,r1,r1 /* destination 0x00000000 */ copy_vec: diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts deleted file mode 100644 index a9a07f9bcd..0000000000 --- a/board/avionic-design/dts/tegra20-medcom-wide.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; - -#include "tegra20-tamonten.dtsi" - -/ { - model = "Avionic Design Medcom-Wide"; - compatible = "ad,medcom-wide", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - status = "okay"; - - dc@54200000 { - status = "okay"; - - rgb { - nvidia,panel = <&lcd_panel>; - status = "okay"; - }; - }; - }; - - serial@70006300 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - lcd_panel: panel { - clock = <61715000>; - xres = <1366>; - yres = <768>; - left-margin = <2>; - right-margin = <47>; - hsync-len = <136>; - lower-margin = <21>; - upper-margin = <11>; - vsync-len = <4>; - - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 500000>; - nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,panel-timings = <0 0 0 0>; - }; -}; diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts deleted file mode 100644 index 20016f29bb..0000000000 --- a/board/avionic-design/dts/tegra20-plutux.dts +++ /dev/null @@ -1,45 +0,0 @@ -/dts-v1/; - -#include "tegra20-tamonten.dtsi" - -/ { - model = "Avionic Design Plutux"; - compatible = "ad,plutux", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - serial@70006300 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; -}; diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi deleted file mode 100644 index f379622c94..0000000000 --- a/board/avionic-design/dts/tegra20-tamonten.dtsi +++ /dev/null @@ -1,500 +0,0 @@ -#include "tegra20.dtsi" - -/ { - model = "Avionic Design Tamonten SOM"; - compatible = "ad,tamonten", "nvidia,tegra20"; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - hdmi { - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - - nvidia,ddc-i2c-bus = <&hdmi_ddc>; - nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ - }; - }; - - pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - ata { - nvidia,pins = "ata"; - nvidia,function = "ide"; - }; - atb { - nvidia,pins = "atb", "gma", "gme"; - nvidia,function = "sdio4"; - }; - atc { - nvidia,pins = "atc"; - nvidia,function = "nand"; - }; - atd { - nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", - "spia", "spib", "spic"; - nvidia,function = "gmi"; - }; - cdev1 { - nvidia,pins = "cdev1"; - nvidia,function = "plla_out"; - }; - cdev2 { - nvidia,pins = "cdev2"; - nvidia,function = "pllp_out4"; - }; - crtp { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - }; - csus { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; - }; - dap1 { - nvidia,pins = "dap1"; - nvidia,function = "dap1"; - }; - dap2 { - nvidia,pins = "dap2"; - nvidia,function = "dap2"; - }; - dap3 { - nvidia,pins = "dap3"; - nvidia,function = "dap3"; - }; - dap4 { - nvidia,pins = "dap4"; - nvidia,function = "dap4"; - }; - dta { - nvidia,pins = "dta", "dtd"; - nvidia,function = "sdio2"; - }; - dtb { - nvidia,pins = "dtb", "dtc", "dte"; - nvidia,function = "rsvd1"; - }; - dtf { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; - }; - gmc { - nvidia,pins = "gmc"; - nvidia,function = "uartd"; - }; - gpu7 { - nvidia,pins = "gpu7"; - nvidia,function = "rtck"; - }; - gpv { - nvidia,pins = "gpv", "slxa", "slxk"; - nvidia,function = "pcie"; - }; - hdint { - nvidia,pins = "hdint"; - nvidia,function = "hdmi"; - }; - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; - }; - irrx { - nvidia,pins = "irrx", "irtx"; - nvidia,function = "uarta"; - }; - kbca { - nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", - "kbce", "kbcf"; - nvidia,function = "kbc"; - }; - lcsn { - nvidia,pins = "lcsn", "ld0", "ld1", "ld2", - "ld3", "ld4", "ld5", "ld6", "ld7", - "ld8", "ld9", "ld10", "ld11", "ld12", - "ld13", "ld14", "ld15", "ld16", "ld17", - "ldc", "ldi", "lhp0", "lhp1", "lhp2", - "lhs", "lm0", "lm1", "lpp", "lpw0", - "lpw1", "lpw2", "lsc0", "lsc1", "lsck", - "lsda", "lsdi", "lspi", "lvp0", "lvp1", - "lvs"; - nvidia,function = "displaya"; - }; - owc { - nvidia,pins = "owc", "spdi", "spdo", "uac"; - nvidia,function = "rsvd2"; - }; - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - }; - rm { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - }; - sdb { - nvidia,pins = "sdb", "sdc", "sdd"; - nvidia,function = "pwm"; - }; - sdio1 { - nvidia,pins = "sdio1"; - nvidia,function = "sdio1"; - }; - slxc { - nvidia,pins = "slxc", "slxd"; - nvidia,function = "spdif"; - }; - spid { - nvidia,pins = "spid", "spie", "spif"; - nvidia,function = "spi1"; - }; - spig { - nvidia,pins = "spig", "spih"; - nvidia,function = "spi2_alt"; - }; - uaa { - nvidia,pins = "uaa", "uab", "uda"; - nvidia,function = "ulpi"; - }; - uad { - nvidia,pins = "uad"; - nvidia,function = "irda"; - }; - uca { - nvidia,pins = "uca", "ucb"; - nvidia,function = "uartc"; - }; - conf_ata { - nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "cdev2", "dap1", "dtb", "gma", - "gmb", "gmc", "gmd", "gme", "gpu7", - "gpv", "i2cp", "pta", "rm", "slxa", - "slxk", "spia", "spib", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - conf_ck32 { - nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", - "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; - }; - conf_csus { - nvidia,pins = "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - }; - conf_crtp { - nvidia,pins = "crtp", "dap2", "dap3", "dap4", - "dtc", "dte", "dtf", "gpu", "sdio1", - "slxc", "slxd", "spdi", "spdo", "spig", - "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - }; - conf_ddc { - nvidia,pins = "ddc", "dta", "dtd", "kbca", - "kbcb", "kbcc", "kbcd", "kbce", "kbcf", - "sdc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - conf_hdint { - nvidia,pins = "hdint", "lcsn", "ldc", "lm1", - "lpw1", "lsc1", "lsck", "lsda", "lsdi", - "lvp0", "owc", "sdb"; - nvidia,tristate = <1>; - }; - conf_irrx { - nvidia,pins = "irrx", "irtx", "sdd", "spic", - "spie", "spih", "uaa", "uab", "uad", - "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; - }; - conf_lc { - nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; - }; - conf_ld0 { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", - "ld5", "ld6", "ld7", "ld8", "ld9", - "ld10", "ld11", "ld12", "ld13", "ld14", - "ld15", "ld16", "ld17", "ldi", "lhp0", - "lhp1", "lhp2", "lhs", "lm0", "lpp", - "lpw0", "lpw2", "lsc0", "lspi", "lvp1", - "lvs", "pmc"; - nvidia,tristate = <0>; - }; - conf_ld17_0 { - nvidia,pins = "ld17_0", "ld19_18", "ld21_20", - "ld23_22"; - nvidia,pull = <1>; - }; - }; - - state_i2cmux_ddc: pinmux_i2cmux_ddc { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; - pta { - nvidia,pins = "pta"; - nvidia,function = "rsvd4"; - }; - }; - - state_i2cmux_pta: pinmux_i2cmux_pta { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "rsvd4"; - }; - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; - }; - - state_i2cmux_idle: pinmux_i2cmux_idle { - ddc { - nvidia,pins = "ddc"; - nvidia,function = "rsvd4"; - }; - pta { - nvidia,pins = "pta"; - nvidia,function = "rsvd4"; - }; - }; - }; - - i2s@70002800 { - status = "okay"; - }; - - serial@70006300 { - status = "okay"; - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - - i2c@7000c000 { - clock-frequency = <400000>; - status = "okay"; - }; - - i2c@7000c400 { - clock-frequency = <100000>; - status = "okay"; - }; - - i2cmux { - compatible = "i2c-mux-pinctrl"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&{/i2c@7000c400}>; - - pinctrl-names = "ddc", "pta", "idle"; - pinctrl-0 = <&state_i2cmux_ddc>; - pinctrl-1 = <&state_i2cmux_pta>; - pinctrl-2 = <&state_i2cmux_idle>; - - hdmi_ddc: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - i2c@7000d000 { - clock-frequency = <400000>; - status = "okay"; - - pmic: tps6586x@34 { - compatible = "ti,tps6586x"; - reg = <0x34>; - interrupts = <0 86 0x4>; - - ti,system-power-controller; - - #gpio-cells = <2>; - gpio-controller; - - sys-supply = <&vdd_5v0_reg>; - vin-sm0-supply = <&sys_reg>; - vin-sm1-supply = <&sys_reg>; - vin-sm2-supply = <&sys_reg>; - vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&sm2_reg>; - vinldo4-supply = <&sm2_reg>; - vinldo678-supply = <&sm2_reg>; - vinldo9-supply = <&sm2_reg>; - - regulators { - sys_reg: sys { - regulator-name = "vdd_sys"; - regulator-always-on; - }; - - sm0 { - regulator-name = "vdd_sys_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - sm1 { - regulator-name = "vdd_sys_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - sm2_reg: sm2 { - regulator-name = "vdd_sys_sm2,vin_ldo*"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; - }; - - ldo0 { - regulator-name = "vdd_ldo0,vddio_pex_clk"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo1 { - regulator-name = "vdd_ldo1,avdd_pll*"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo2 { - regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo3 { - regulator-name = "vdd_ldo3,avdd_usb*"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo4 { - regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo5 { - regulator-name = "vdd_ldo5,vcore_mmc"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - ldo6 { - regulator-name = "vdd_ldo6,avdd_vdac"; - /* - * According to the Tegra 2 Automotive - * DataSheet, a typical value for this - * would be 2.8V, but the PMIC only - * supports 2.85V. - */ - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - hdmi_vdd_reg: ldo7 { - regulator-name = "vdd_ldo7,avdd_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - hdmi_pll_reg: ldo8 { - regulator-name = "vdd_ldo8,avdd_hdmi_pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo9 { - regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; - /* - * According to the Tegra 2 Automotive - * DataSheet, a typical value for this - * would be 2.8V, but the PMIC only - * supports 2.85V. - */ - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - - ldo_rtc { - regulator-name = "vdd_rtc_out"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - temperature-sensor@4c { - compatible = "onnn,nct1008"; - reg = <0x4c>; - }; - }; - - pmc { - nvidia,invert-interrupt; - }; - - usb@c5008000 { - status = "okay"; - }; - - sdhci@c8000600 { - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - bus-width = <4>; - status = "okay"; - }; - - regulators { - compatible = "simple-bus"; - - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - }; -}; diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts deleted file mode 100644 index 4c1b08d768..0000000000 --- a/board/avionic-design/dts/tegra20-tec.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; - -#include "tegra20-tamonten.dtsi" - -/ { - model = "Avionic Design Tamonten Evaluation Carrier"; - compatible = "ad,tec", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - status = "okay"; - - dc@54200000 { - status = "okay"; - - rgb { - nvidia,panel = <&lcd_panel>; - status = "okay"; - }; - }; - }; - - serial@70006300 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - lcd_panel: panel { - clock = <33260000>; - xres = <800>; - yres = <480>; - left-margin = <120>; - right-margin = <120>; - hsync-len = <16>; - lower-margin = <15>; - upper-margin = <15>; - vsync-len = <15>; - - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 500000>; - nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,panel-timings = <0 0 0 0>; - }; -}; diff --git a/board/avionic-design/dts/tegra30-tamonten.dtsi b/board/avionic-design/dts/tegra30-tamonten.dtsi deleted file mode 100644 index 50d5762311..0000000000 --- a/board/avionic-design/dts/tegra30-tamonten.dtsi +++ /dev/null @@ -1,69 +0,0 @@ -#include "tegra30.dtsi" - -/ { - model = "Avionic Design Tamonten NG"; - compatible = "ad,tamonten-ng", "nvidia,tegra30"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - aliases { - i2c0 = "/i2c@7000c000"; - i2c1 = "/i2c@7000c700"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000d000"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; - sdhci2 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; - }; - - /* GEN1 */ - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* GEN2 */ - i2c@7000c400 { - clock-frequency = <100000>; - }; - - /* CAM */ - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* DDC */ - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* PWR */ - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - }; - - /* SD slot on the base board */ - sdhci@78000400 { - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 67 0>; /* gpio PI3 */ - bus-width = <4>; - }; - - /* EMMC on the COM module */ - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - usb@7d008000 { - status = "okay"; - }; - -}; diff --git a/board/avionic-design/dts/tegra30-tec-ng.dts b/board/avionic-design/dts/tegra30-tec-ng.dts deleted file mode 100644 index 8a69e818ca..0000000000 --- a/board/avionic-design/dts/tegra30-tec-ng.dts +++ /dev/null @@ -1,18 +0,0 @@ -/dts-v1/; - -#include "tegra30-tamonten.dtsi" - -/ { - model = "Avionic Design Tamonten™ NG Evaluation Carrier"; - compatible = "ad,tec-ng", "nvidia,tegra30"; - - /* GEN2 */ - i2c@7000c400 { - status = "okay"; - }; - - /* SD card slot */ - sdhci@78000400 { - status = "okay"; - }; -}; diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile index 87e19123b0..bcf7ccfe2a 100644 --- a/board/avionic-design/medcom-wide/Makefile +++ b/board/avionic-design/medcom-wide/Makefile @@ -9,4 +9,4 @@ obj-y := ../common/tamonten.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index 87e19123b0..bcf7ccfe2a 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -9,4 +9,4 @@ obj-y := ../common/tamonten.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/avionic-design/tec-ng/Makefile b/board/avionic-design/tec-ng/Makefile index 79d8602626..a556b92e8e 100644 --- a/board/avionic-design/tec-ng/Makefile +++ b/board/avionic-design/tec-ng/Makefile @@ -7,4 +7,4 @@ obj-y := ../common/tamonten-ng.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index 87e19123b0..bcf7ccfe2a 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -9,4 +9,4 @@ obj-y := ../common/tamonten.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/bct-brettl2/config.mk b/board/bct-brettl2/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/bct-brettl2/config.mk +++ b/board/bct-brettl2/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf518f-ezbrd/config.mk b/board/bf518f-ezbrd/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/bf518f-ezbrd/config.mk +++ b/board/bf518f-ezbrd/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf526-ezbrd/config.mk b/board/bf526-ezbrd/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/bf526-ezbrd/config.mk +++ b/board/bf526-ezbrd/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/bf527-ad7160-eval/config.mk +++ b/board/bf527-ad7160-eval/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf527-ezkit/config.mk b/board/bf527-ezkit/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/bf527-ezkit/config.mk +++ b/board/bf527-ezkit/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/bf527-sdp/config.mk b/board/bf527-sdp/config.mk index 5f327a990e..af299f5f1e 100644 --- a/board/bf527-sdp/config.mk +++ b/board/bf527-sdp/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6 diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index 973d357559..97eaafef2e 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index 973d357559..97eaafef2e 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index ae2ea0b747..bc0e7476e5 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf538f-ezkit/config.mk b/board/bf538f-ezkit/config.mk index 973d357559..97eaafef2e 100644 --- a/board/bf538f-ezkit/config.mk +++ b/board/bf538f-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf548-ezkit/config.mk b/board/bf548-ezkit/config.mk index ad3a7293df..8d2c60f308 100644 --- a/board/bf548-ezkit/config.mk +++ b/board/bf548-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 diff --git a/board/bf561-acvilon/config.mk b/board/bf561-acvilon/config.mk index c33aef9d28..ce94715572 100644 --- a/board/bf561-acvilon/config.mk +++ b/board/bf561-acvilon/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index c33aef9d28..ce94715572 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c index cfc64fe51d..43a43306bb 100644 --- a/board/bf609-ezkit/bf609-ezkit.c +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -41,12 +41,12 @@ int board_eth_init(bd_t *bis) if (CONFIG_DW_PORTS & 1) { static const unsigned short pins[] = P_RMII0; if (!peripheral_request_list(pins, "emac0")) - ret += designware_initialize(0, EMAC0_MACCFG, 1, 0); + ret += designware_initialize(EMAC0_MACCFG, 0); } if (CONFIG_DW_PORTS & 2) { static const unsigned short pins[] = P_RMII1; if (!peripheral_request_list(pins, "emac1")) - ret += designware_initialize(1, EMAC1_MACCFG, 1, 0); + ret += designware_initialize(EMAC1_MACCFG, 0); } return ret; diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 3f4cfa1a29..d9c05b07bf 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -389,7 +389,7 @@ int board_eth_init(bd_t *bis) } #endif -#ifdef CONFIG_MV_UDC +#ifdef CONFIG_CI_UDC /* For otg ethernet*/ usb_eth_initialize(bis); #endif diff --git a/board/br4/config.mk b/board/br4/config.mk index 5c18d5c9e4..2436ec07f4 100644 --- a/board/br4/config.mk +++ b/board/br4/config.mk @@ -9,6 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/broadcom/bcm28155_ap/Makefile b/board/broadcom/bcm28155_ap/Makefile new file mode 100644 index 0000000000..b18785a078 --- /dev/null +++ b/board/broadcom/bcm28155_ap/Makefile @@ -0,0 +1,7 @@ +# +# Copyright 2013 Broadcom Corporation. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += $(BOARD).o diff --git a/board/broadcom/bcm28155_ap/bcm28155_ap.c b/board/broadcom/bcm28155_ap/bcm28155_ap.c new file mode 100644 index 0000000000..940a1c2c50 --- /dev/null +++ b/board/broadcom/bcm28155_ap/bcm28155_ap.c @@ -0,0 +1,87 @@ +/* + * Copyright 2013 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/mach-types.h> +#include <mmc.h> +#include <asm/kona-common/kona_sdhci.h> +#include <asm/kona-common/clk.h> +#include <asm/arch/sysmap.h> + +#define SECWATCHDOG_SDOGCR_OFFSET 0x00000000 +#define SECWATCHDOG_SDOGCR_EN_SHIFT 27 +#define SECWATCHDOG_SDOGCR_SRSTEN_SHIFT 26 +#define SECWATCHDOG_SDOGCR_CLKS_SHIFT 20 +#define SECWATCHDOG_SDOGCR_LD_SHIFT 0 + +DECLARE_GLOBAL_DATA_PTR; + +/* + * board_init - early hardware init + */ +int board_init(void) +{ + printf("Relocation Offset is: %08lx\n", gd->reloc_off); + + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + clk_init(); + + return 0; +} + +/* + * misc_init_r - miscellaneous platform dependent initializations + */ +int misc_init_r(void) +{ + /* Disable watchdog reset - watchdog unused */ + writel((0 << SECWATCHDOG_SDOGCR_EN_SHIFT) | + (0 << SECWATCHDOG_SDOGCR_SRSTEN_SHIFT) | + (4 << SECWATCHDOG_SDOGCR_CLKS_SHIFT) | + (0x5a0 << SECWATCHDOG_SDOGCR_LD_SHIFT), + (SECWD_BASE_ADDR + SECWATCHDOG_SDOGCR_OFFSET)); + + return 0; +} + +/* + * dram_init - sets uboots idea of sdram size + */ +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +/* This is called after dram_init() so use get_ram_size result */ +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; +} + +#ifdef CONFIG_KONA_SDHCI +/* + * mmc_init - Initializes mmc + */ +int board_mmc_init(bd_t *bis) +{ + int ret = 0; + + /* Register eMMC - SDIO2 */ + ret = kona_sdhci_init(1, 400000, 0); + if (ret) + return ret; + + /* Register SD Card - SDIO4 kona_mmc_init assumes 0 based index */ + ret = kona_sdhci_init(3, 400000, 0); + return ret; +} +#endif diff --git a/board/chromebook-x86/coreboot/config.mk b/board/chromebook-x86/coreboot/config.mk deleted file mode 100644 index 0c05dd03db..0000000000 --- a/board/chromebook-x86/coreboot/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# Copyright (c) 2011 The Chromium OS Authors. All rights reserved. -# -# SPDX-License-Identifier: GPL-2.0 BSD-3-Clause -# - -HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros diff --git a/board/chromebook-x86/dts/alex.dts b/board/chromebook-x86/dts/alex.dts deleted file mode 100644 index 2f13544612..0000000000 --- a/board/chromebook-x86/dts/alex.dts +++ /dev/null @@ -1,24 +0,0 @@ -/dts-v1/; - -/include/ "coreboot.dtsi" - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "Google Alex"; - compatible = "google,alex", "intel,atom-pineview"; - - config { - silent_console = <0>; - }; - - gpio: gpio {}; - - serial { - reg = <0x3f8 8>; - clock-frequency = <115200>; - }; - - chosen { }; - memory { device_type = "memory"; reg = <0 0>; }; -}; diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts deleted file mode 100644 index 4a37dac4ea..0000000000 --- a/board/chromebook-x86/dts/link.dts +++ /dev/null @@ -1,35 +0,0 @@ -/dts-v1/; - -/include/ "coreboot.dtsi" - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "Google Link"; - compatible = "google,link", "intel,celeron-ivybridge"; - - config { - silent_console = <0>; - }; - - gpio: gpio {}; - - serial { - reg = <0x3f8 8>; - clock-frequency = <115200>; - }; - - chosen { }; - memory { device_type = "memory"; reg = <0 0>; }; - - spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich9"; - spi-flash@0 { - reg = <0>; - compatible = "winbond,w25q64", "spi-flash"; - memory-map = <0xff800000 0x00800000>; - }; - }; -}; diff --git a/board/cm-bf527/config.mk b/board/cm-bf527/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/cm-bf527/config.mk +++ b/board/cm-bf527/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/cm-bf533/config.mk b/board/cm-bf533/config.mk index 973d357559..97eaafef2e 100644 --- a/board/cm-bf533/config.mk +++ b/board/cm-bf533/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf537e/config.mk b/board/cm-bf537e/config.mk index 973d357559..97eaafef2e 100644 --- a/board/cm-bf537e/config.mk +++ b/board/cm-bf537e/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf537u/config.mk b/board/cm-bf537u/config.mk index 973d357559..97eaafef2e 100644 --- a/board/cm-bf537u/config.mk +++ b/board/cm-bf537u/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf548/config.mk b/board/cm-bf548/config.mk index c005afb881..289c8a488e 100644 --- a/board/cm-bf548/config.mk +++ b/board/cm-bf548/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 diff --git a/board/cm-bf548/video.c b/board/cm-bf548/video.c index a43413e976..c35d285070 100644 --- a/board/cm-bf548/video.c +++ b/board/cm-bf548/video.c @@ -11,6 +11,7 @@ #include <config.h> #include <malloc.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/gpio.h> #include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> diff --git a/board/cm-bf561/config.mk b/board/cm-bf561/config.mk index c33aef9d28..ce94715572 100644 --- a/board/cm-bf561/config.mk +++ b/board/cm-bf561/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c index 251192839e..8315a57ed9 100644 --- a/board/cm4008/flash.c +++ b/board/cm4008/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start_ofs, + CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), &flash_info[0]); return size; diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c index 251192839e..8315a57ed9 100644 --- a/board/cm41xx/flash.c +++ b/board/cm41xx/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + _bss_start_ofs, + CONFIG_SYS_FLASH_BASE + (__bss_end - __bss_start), &flash_info[0]); return size; diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts deleted file mode 100644 index 780203cfb3..0000000000 --- a/board/compal/dts/tegra20-paz00.dts +++ /dev/null @@ -1,91 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "Toshiba AC100 / Dynabook AZ"; - compatible = "compal,paz00", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000000"; - }; - - memory { - reg = <0x00000000 0x20000000>; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - serial@70006000 { - clock-frequency = < 216000000 >; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000000 { - status = "okay"; - cd-gpios = <&gpio 173 1>; /* gpio PV5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 169 0>; /* gpio PV1 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; - - lcd_panel: panel { - /* PAZ00 has 1024x600 */ - clock = <54030000>; - xres = <1024>; - yres = <600>; - right-margin = <160>; - left-margin = <24>; - hsync-len = <136>; - upper-margin = <3>; - lower-margin = <61>; - vsync-len = <6>; - hsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 0>; - nvidia,backlight-enable-gpios = <&gpio 164 0>; /* PU4 */ - nvidia,lvds-shutdown-gpios = <&gpio 102 0>; /* PM6 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 4 0>; /* PA4 */ - nvidia,panel-timings = <400 4 203 17 15>; - }; -}; diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index b2d3b6b4b2..e6a0b29997 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -16,4 +16,4 @@ obj-y := paz00.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c index 01019e8eb2..9583149bed 100644 --- a/board/compulab/cm_t335/cm_t335.c +++ b/board/compulab/cm_t335/cm_t335.c @@ -47,7 +47,7 @@ static void cpsw_control(int enabled) static struct cpsw_slave_data cpsw_slave = { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 0, .phy_if = PHY_INTERFACE_MODE_RGMII, }; diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds index 1b609a249a..0984dfe6ea 100644 --- a/board/compulab/cm_t335/u-boot.lds +++ b/board/compulab/cm_t335/u-boot.lds @@ -61,7 +61,12 @@ SECTIONS *(.__rel_dyn_end) } - _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .; /* * Deprecated: this MMU section is used by pxa at present but @@ -92,10 +97,14 @@ SECTIONS KEEP(*(.__bss_end)); } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } + .dynsym _image_binary_end : { *(.dynsym) } + .hash : { *(.hash) } + .got.plt : { *(.got.plt) } + .dynbss : { *(.dynbss) } + .dynstr : { *(.dynstr*) } + .dynamic : { *(.dynamic*) } + .plt : { *(.plt*) } + .interp : { *(.interp*) } + .gnu : { *(.gnu*) } + .ARM.exidx : { *(.ARM.exidx*) } } diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts deleted file mode 100644 index ee31476c1e..0000000000 --- a/board/compulab/dts/tegra20-trimslice.dts +++ /dev/null @@ -1,64 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "Compulab TrimSlice board"; - compatible = "compulab,trimslice", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000000"; - }; - - memory { - reg = <0x00000000 0x40000000>; - }; - - serial@70006000 { - clock-frequency = <216000000>; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - spi@7000c380 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000000 { - status = "okay"; - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - cd-gpios = <&gpio 121 1>; /* gpio PP1 */ - wp-gpios = <&gpio 122 0>; /* gpio PP2 */ - bus-width = <4>; - }; -}; diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index f3bd00dbf1..311eb92d7b 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -7,4 +7,4 @@ obj-y := trimslice.o -include ../../nvidia/common/common.mk +include $(srctree)/board/nvidia/common/common.mk diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile index 5f6c690b7c..63f43dab29 100644 --- a/board/cray/L1/Makefile +++ b/board/cray/L1/Makefile @@ -9,8 +9,10 @@ obj-y = L1.o flash.o obj-y += init.o obj-y += bootscript.o -$(obj)bootscript.c: $(obj)bootscript.image - od -t x1 -v -A x $^ | awk -f x2c.awk > $@ +$(obj)/bootscript.c: $(obj)/bootscript.image + od -t x1 -v -A x $^ | awk -f $(srctree)/$(src)/x2c.awk > $@ -$(obj)bootscript.image: $(src)bootscript.hush $(src)Makefile - -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $(src)bootscript.hush $@ +$(obj)/bootscript.image: $(src)/bootscript.hush + -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $< $@ + +clean-files := bootscript.c bootscript.image
\ No newline at end of file diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 5480d1f276..de21a132b0 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -49,5 +49,9 @@ SECTIONS } >.sram __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } } diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index d49c314490..299226b95f 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -61,5 +61,8 @@ SECTIONS __bss_end = .; } - _end = .; + .end : + { + *(.__end) + } } diff --git a/board/dvlhost/Makefile b/board/dvlhost/Makefile deleted file mode 100644 index 8b489362ce..0000000000 --- a/board/dvlhost/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := dvlhost.o watchdog.o diff --git a/board/dvlhost/dvlhost.c b/board/dvlhost/dvlhost.c deleted file mode 100644 index 087070f40d..0000000000 --- a/board/dvlhost/dvlhost.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <command.h> -#include <malloc.h> -#include <asm/arch/ixp425.h> -#include <asm/io.h> -#include <miiphy.h> -#ifdef CONFIG_PCI -#include <pci.h> -#include <asm/arch/ixp425pci.h> -#endif - -#include "dvlhost_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* CS1: LED Latch */ - writel(0xBFFF0002, IXP425_EXP_CS1); - return 0; -} - -int board_init(void) -{ - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x00000100; - - /* Setup GPIOs used as output */ - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_WDGTRIGGER); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DLAN_PAIRING); - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_PCIRST); - - /* - * LED latch enable and watchdog enable are tied to the same GPIO, - * so we need to trigger the watchdog if we want to enable the LEDs. - */ -#ifdef CONFIG_HW_WATCHDOG - GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_WDG_LED_EN); -#else - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_WDG_LED_EN); -#endif - - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_WDGTRIGGER); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DLAN_PAIRING); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_WDG_LED_EN); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCIRST); - - /* Setup GPIOs for Interrupt inputs */ - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_WLAN); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_PAIRING); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_BTN_RESET); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_IRQA); - GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_IRQB); - - /* Setup GPIO's for 33MHz clock output */ - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK); - GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK); - writel(0x01FF01FF, IXP425_GPIO_GPCLKR); - - /* turn off all LEDs */ - writew(0x0000, DVLHOST_LED_LATCH); - - udelay(533); - GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_PCIRST); - - return 0; -} - -/* Check Board Identity */ -int checkboard(void) -{ - char *s = getenv("serial#"); - - puts("Board: dLAN 200AV (dvlhost)"); - - if (s != NULL) { - puts(", serial# "); - puts(s); - } - putc('\n'); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20); - return 0; -} - -#ifdef CONFIG_PCI -struct pci_controller hose; - -void pci_init_board(void) -{ - pci_ixp_init(&hose); -} -#endif - -void reset_phy(void) -{ - /* init IcPlus IP175C ethernet switch to native IP175C mode */ - miiphy_write("NPE1", 29, 31, 0x175C); -} diff --git a/board/dvlhost/dvlhost_hw.h b/board/dvlhost/dvlhost_hw.h deleted file mode 100644 index 545099e9ea..0000000000 --- a/board/dvlhost/dvlhost_hw.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * hardware register definitions for the - * dLAN200 AV Wireless G ("dvlhost") board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _DVLHOST_HW_H -#define _DVLHOST_HW_H - -/* - * GPIO settings - */ -#define CONFIG_SYS_GPIO_WDGTRIGGER 0 /* Out */ -#define CONFIG_SYS_GPIO_BTN_WLAN 1 -#define CONFIG_SYS_GPIO_BTN_PAIRING 6 -#define CONFIG_SYS_GPIO_DLAN_PAIRING 7 /* Out */ -#define CONFIG_SYS_GPIO_BTN_RESET 9 -#define CONFIG_SYS_GPIO_IRQB 10 -#define CONFIG_SYS_GPIO_IRQA 11 -#define CONFIG_SYS_GPIO_WDG_LED_EN 12 /* Out */ -#define CONFIG_SYS_GPIO_PCIRST 13 /* Out */ -#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */ -#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */ - -#define DVLHOST_LED_LATCH IXP425_EXP_BUS_CS1_BASE_PHYS - -#endif diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds deleted file mode 100644 index ebcaf447b8..0000000000 --- a/board/dvlhost/u-boot.lds +++ /dev/null @@ -1,99 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") -OUTPUT_ARCH (arm) -ENTRY (_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN (4); - .text : { - *(.__image_copy_start) - arch/arm/cpu/ixp/start.o(.text*) - net/built-in.o(.text*) - board/dvlhost/built-in.o(.text*) - arch/arm/cpu/ixp/built-in.o(.text*) - drivers/serial/built-in.o(.text*) - - . = env_offset; - common/env_embedded.o(.ppcenv) - *(.text*) - } - - . = ALIGN (4); - .rodata : { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - . = ALIGN (4); - .data : { - *(.data*) - } - . = ALIGN (4); - .got : { - *(.got) - } - . =.; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = ALIGN (4); - - .image_copy_end : - { - *(.__image_copy_end) - } - - .rel_dyn_start : - { - *(.__rel_dyn_start) - } - - .rel.dyn : { - *(.rel*) - } - - .rel_dyn_end : - { - *(.__rel_dyn_end) - } - - _end = .; - -/* - * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c - * __bss_base and __bss_limit are for linker only (overlay ordering) - */ - - .bss_start __rel_dyn_start (OVERLAY) : { - KEEP(*(.__bss_start)); - __bss_base = .; - } - - .bss __bss_base (OVERLAY) : { - *(.bss*) - . = ALIGN(4); - __bss_limit = .; - } - .bss_end __bss_limit (OVERLAY) : { - KEEP(*(.__bss_end)); - } - - .dynsym _end : { *(.dynsym) } - .dynbss : { *(.dynbss) } - .dynstr : { *(.dynstr*) } - .dynamic : { *(.dynamic*) } - .hash : { *(.hash*) } - .plt : { *(.plt*) } - .interp : { *(.interp*) } - .gnu : { *(.gnu*) } - .ARM.exidx : { *(.ARM.exidx*) } -} diff --git a/board/dvlhost/watchdog.c b/board/dvlhost/watchdog.c deleted file mode 100644 index 02ec35eb1a..0000000000 --- a/board/dvlhost/watchdog.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * (C) Copyright 2009 - * Michael Schwingen, michael@schwingen.org - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include "dvlhost_hw.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_HW_WATCHDOG -#include <watchdog.h> -#include <asm/arch/ixp425.h> - -void hw_watchdog_reset(void) -{ - unsigned int x; - x = readl(IXP425_GPIO_GPOUTR); - x ^= (1 << (CONFIG_SYS_GPIO_WDGTRIGGER)); - writel(x, IXP425_GPIO_GPOUTR); -} - -#endif /* CONFIG_HW_WATCHDOG */ diff --git a/board/fads/fads.h b/board/fads/fads.h index cf6c928dc7..fa49080fb7 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x00100000 -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) diff --git a/board/freescale/c29xpcie/spl.c b/board/freescale/c29xpcie/spl.c index 3cfdb723b9..2111711400 100644 --- a/board/freescale/c29xpcie/spl.c +++ b/board/freescale/c29xpcie/spl.c @@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 25f063d3ad..f6a0879753 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -13,7 +13,10 @@ MINIMAL=y endif endif -ifndef MINIMAL +ifdef MINIMAL +# necessary to create built-in.o +obj- := __dummy__.o +else obj-$(CONFIG_FSL_CADMUS) += cadmus.o obj-$(CONFIG_FSL_VIA) += cds_via.o obj-$(CONFIG_FMAN_ENET) += fman.o diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 1cca176c38..6da1d4b5f5 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -69,7 +69,12 @@ SECTIONS *(.__rel_dyn_end) } - _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .; /* * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c @@ -90,7 +95,7 @@ SECTIONS KEEP(*(.__bss_end)); } - .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index db0bf17363..08dd66fcc6 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -343,6 +343,7 @@ int board_early_init_f(void) return 0; } +#if defined(CONFIG_DISPLAY_CPUINFO) int print_cpuinfo(void) { u32 cpurev; @@ -356,6 +357,7 @@ int print_cpuinfo(void) printf("Reset cause: %s\n", get_reset_cause()); return 0; } +#endif /* * Do not overwrite the console diff --git a/board/freescale/p1010rdb/Makefile b/board/freescale/p1010rdb/Makefile index d6f05f3cfe..660d1bbc2a 100644 --- a/board/freescale/p1010rdb/Makefile +++ b/board/freescale/p1010rdb/Makefile @@ -18,6 +18,10 @@ obj-y += spl_minimal.o tlb.o law.o else +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +endif + obj-y += p1010rdb.o obj-y += ddr.o obj-y += law.o diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c new file mode 100644 index 0000000000..11bd9cfccc --- /dev/null +++ b/board/freescale/p1010rdb/spl.c @@ -0,0 +1,108 @@ +/* Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> +#include <fsl_esdhc.h> +#include <spi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +phys_size_t get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR; + + console_init_f(); + + /* Clock configuration to access CPLD using IFC(GPCM) */ + setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + +#ifdef CONFIG_P1010RDB_PB + setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + gd->bus_clk / 16 / CONFIG_BAUDRATE); + +#ifdef CONFIG_SPL_MMC_BOOT + puts("\nSD boot...\n"); +#elif defined(CONFIG_SPL_SPI_BOOT) + puts("\nSPI Flash boot...\n"); +#endif + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); + +#ifndef CONFIG_SPL_NAND_BOOT + env_init(); +#endif +#ifdef CONFIG_SPL_MMC_BOOT + mmc_initialize(bd); +#endif + + /* relocate environment function pointers etc. */ +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; +#else + env_relocate(); +#endif + + i2c_init_all(); + + gd->ram_size = initdram(0); +#ifdef CONFIG_SPL_NAND_BOOT + puts("\nTertiary program loader running in sram..."); +#else + puts("\nSecond program loader running in sram..."); +#endif + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_boot(); +#elif defined(CONFIG_SPL_SPI_BOOT) + spi_boot(); +#elif defined(CONFIG_SPL_NAND_BOOT) + nand_boot(); +#endif +} diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index 39a5a0f37b..607957003d 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -16,78 +16,16 @@ DECLARE_GLOBAL_DATA_PTR; - -void sdram_init(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - u32 ddr_ratio; - unsigned long ddr_freq_mhz; - - ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; - ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000; - - /* mask off E bit */ - u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR)); - - __raw_writel(CONFIG_SYS_DDR_CONTROL | SDRAM_CFG_32_BE, &ddr->sdram_cfg); - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); - __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - - if (ddr_freq_mhz < 700) { - __raw_writel(CONFIG_SYS_DDR_TIMING_3_667, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0_667, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1_667, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2_667, &ddr->timing_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1_667, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2_667, &ddr->sdram_mode_2); - __raw_writel(CONFIG_SYS_DDR_INTERVAL_667, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_667, &ddr->sdram_clk_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_667, &ddr->ddr_wrlvl_cntl); - } else { - __raw_writel(CONFIG_SYS_DDR_TIMING_3_800, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0_800, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1_800, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2_800, &ddr->timing_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1_800, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2_800, &ddr->sdram_mode_2); - __raw_writel(CONFIG_SYS_DDR_INTERVAL_800, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL_800, &ddr->sdram_clk_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL_800, &ddr->ddr_wrlvl_cntl); - } - - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl); - - /* P1014 and it's derivatives support max 16bit DDR width */ - if (svr == SVR_P1014) { - __raw_writel(ddr->sdram_cfg & ~SDRAM_CFG_DBW_MASK, &ddr->sdram_cfg); - __raw_writel(ddr->sdram_cfg | SDRAM_CFG_16_BE, &ddr->sdram_cfg); - /* For CS0_BNDS we divide the start and end address by 2, so we can just - * shift the entire register to achieve the desired result and the mask - * the value so we don't write reserved fields */ - __raw_writel((CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff, &ddr->cs0_bnds); - } - - asm volatile("sync;isync"); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); - - set_next_law(CONFIG_SYS_NAND_DDR_LAW, LAW_SIZE_1G, LAW_TRGT_IF_DDR_1); -} - void board_init_f(ulong bootflag) { u32 plat_ratio; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); +#endif + /* initialize selected port with appropriate baud rate */ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; plat_ratio >>= 1; @@ -98,9 +36,6 @@ void board_init_f(ulong bootflag) puts("\nNAND boot... "); - /* Initialize the DDR3 */ - sdram_init(); - /* copy code to RAM and jump to it - this should not return */ /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. @@ -111,6 +46,7 @@ void board_init_f(ulong bootflag) void board_init_r(gd_t *gd, ulong dest_addr) { + puts("\nSecond program loader running in sram..."); nand_boot(); } diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index a3d36b35d5..af40f979d3 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -73,10 +73,18 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_1G, 1) + 0, 8, BOOKE_PAGESZ_1G, 1), +#endif + +#ifdef CONFIG_SYS_INIT_L2_ADDR + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1) #endif }; diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c index 7f151e38cf..7bd9d296ee 100644 --- a/board/freescale/p1022ds/spl.c +++ b/board/freescale/p1022ds/spl.c @@ -21,7 +21,7 @@ static const u32 sysclk_tbl[] = { 99999000, 11111000, 12499800, 13333200 }; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/freescale/p1_p2_rdb_pc/spl.c b/board/freescale/p1_p2_rdb_pc/spl.c index 9bb071692d..8d0d850480 100644 --- a/board/freescale/p1_p2_rdb_pc/spl.c +++ b/board/freescale/p1_p2_rdb_pc/spl.c @@ -20,7 +20,7 @@ static const u32 sysclk_tbl[] = { 99999000, 11111000, 12499800, 13333200 }; -ulong get_effective_memsize(void) +phys_size_t get_effective_memsize(void) { return CONFIG_SYS_L2_SIZE; } diff --git a/board/freescale/t1040qds/Makefile b/board/freescale/t1040qds/Makefile index 93af9eb6a0..c7470d7cbb 100644 --- a/board/freescale/t1040qds/Makefile +++ b/board/freescale/t1040qds/Makefile @@ -9,3 +9,4 @@ obj-y += ddr.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o +obj-y += eth.o diff --git a/board/freescale/t1040qds/README b/board/freescale/t1040qds/README index 6d380ae86d..8160ca0bc0 100644 --- a/board/freescale/t1040qds/README +++ b/board/freescale/t1040qds/README @@ -121,14 +121,14 @@ NOR Flash memory Map on T1040QDS 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c new file mode 100644 index 0000000000..3077b4ae2c --- /dev/null +++ b/board/freescale/t1040qds/eth.c @@ -0,0 +1,492 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * The RGMII PHYs are provided by the two on-board PHY connected to + * dTSEC instances 4 and 5. The SGMII PHYs are provided by one on-board + * PHY or by the standard four-port SGMII riser card (VSC). + */ + +#include <common.h> +#include <netdev.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" +#include "../common/qixis.h" + +#include "t1040qds_qixis.h" + +#ifdef CONFIG_FMAN_ENET + /* - In T1040 there are only 8 SERDES lanes, spread across 2 SERDES banks. + * Bank 1 -> Lanes A, B, C, D + * Bank 2 -> Lanes E, F, G, H + */ + + /* Mapping of 8 SERDES lanes to T1040 QDS board slots. A value of '0' here + * means that the mapping must be determined dynamically, or that the lane + * maps to something other than a board slot. + */ +static u8 lane_to_slot[] = { + 0, 0, 0, 0, 0, 0, 0, 0 +}; + +/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs + * housed. + */ +static int riser_phy_addr[] = { + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, + CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, +}; + +/* Slot2 does not have EMI connections */ +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII0 0 +#define EMI1_RGMII1 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT6 6 +#define EMI1_SLOT7 7 +#define EMI2 8 + +static int mdio_mux[NUM_FM_PORTS]; + +static const char * const mdio_names[] = { + "T1040_QDS_MDIO0", + "T1040_QDS_MDIO1", + "T1040_QDS_MDIO2", + "T1040_QDS_MDIO3", + "T1040_QDS_MDIO4", + "T1040_QDS_MDIO5", + "T1040_QDS_MDIO6", + "T1040_QDS_MDIO7", +}; + +struct t1040_qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static const char *t1040_qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = t1040_qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +static void t1040_qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if (muxval <= 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int t1040_qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct t1040_qds_mdio *priv = bus->priv; + + t1040_qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int t1040_qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct t1040_qds_mdio *priv = bus->priv; + + t1040_qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int t1040_qds_mdio_reset(struct mii_dev *bus) +{ + struct t1040_qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int t1040_qds_mdio_init(char *realbusname, u8 muxval) +{ + struct t1040_qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate t1040_qds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate t1040_qds private data\n"); + free(bus); + return -1; + } + + bus->read = t1040_qds_mdio_read; + bus->write = t1040_qds_mdio_write; + bus->reset = t1040_qds_mdio_reset; + sprintf(bus->name, t1040_qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +/* + * Initialize the lane_to_slot[] array. + * + * On the T1040QDS board the mapping is controlled by ?? register. + */ +static void initialize_lane_to_slot(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + int serdes1_prtcl = (in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL) + >> FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + QIXIS_WRITE(cms[0], 0x07); + + switch (serdes1_prtcl) { + case 0x60: + case 0x66: + case 0x67: + case 0x69: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + break; + case 0x86: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + break; + case 0x87: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[7] = 7; + break; + case 0x89: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[7] = 7; + break; + case 0x8d: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0x8F: + case 0x85: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xA5: + lane_to_slot[1] = 7; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xA7: + lane_to_slot[1] = 7; + lane_to_slot[7] = 7; + break; + case 0xAA: + lane_to_slot[1] = 7; + lane_to_slot[6] = 7; + lane_to_slot[7] = 7; + break; + case 0x40: + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + break; + default: + printf("qds: Fman: Unsupported SerDes Protocol 0x%02x\n", + serdes1_prtcl); + break; + } +} + +/* + * Given the following ... + * + * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' + * compatible string and 'addr' physical address) + * + * 2) An Fman port + * + * ... update the phy-handle property of the Ethernet node to point to the + * right PHY. This assumes that we already know the PHY for each port. + * + * The offset of the Fman Ethernet node is also passed in for convenience, but + * it is not used, and we recalculate the offset anyway. + * + * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. + * Inside the Fman, "ports" are things that connect to MACs. We only call them + * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs + * and ports are the same thing. + * + */ +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + phy_interface_t intf = fm_info_get_enet_if(port); + char phy[16]; + + /* The RGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_RGMII) { + sprintf(phy, "rgmii_phy%u", port == FM1_DTSEC4 ? 1 : 2); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + + /* The SGMII PHY is identified by the MAC connected to it */ + if (intf == PHY_INTERFACE_MODE_SGMII) { + int lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1 + + port); + u8 slot; + if (lane < 0) + return; + slot = lane_to_slot[lane]; + if (slot) { + /* Slot housing a SGMII riser card */ + sprintf(phy, "phy_s%x_%02x", slot, + (fm_info_get_phy_address(port - FM1_DTSEC1)- + CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + 1)); + fdt_set_phy_handle(fdt, compat, addr, phy); + } + } +} + +void fdt_fixup_board_enet(void *fdt) +{ + int i, lane, idx; + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + idx = i - FM1_DTSEC1; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + + switch (mdio_mux[i]) { + case EMI1_SLOT3: + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case EMI1_SLOT5: + fdt_status_okay_by_alias(fdt, "emi1_slot5"); + break; + case EMI1_SLOT6: + fdt_status_okay_by_alias(fdt, "emi1_slot6"); + break; + case EMI1_SLOT7: + fdt_status_okay_by_alias(fdt, "emi1_slot7"); + break; + } + break; + case PHY_INTERFACE_MODE_RGMII: + if (i == FM1_DTSEC4) + fdt_status_okay_by_alias(fdt, "emi1_rgmii0"); + + if (i == FM1_DTSEC5) + fdt_status_okay_by_alias(fdt, "emi1_rgmii1"); + break; + default: + break; + } + } +} +#endif /* #ifdef CONFIG_FMAN_ENET */ + +static void set_brdcfg9_for_gtx_clk(void) +{ + u8 brdcfg9; + brdcfg9 = QIXIS_READ(brdcfg[9]); + brdcfg9 |= (1 << 5); + QIXIS_WRITE(brdcfg[9], brdcfg9); +} + +void t1040_handle_phy_interface_sgmii(int i) +{ + int lane, idx, slot; + idx = i - FM1_DTSEC1; + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + + if (lane < 0) + return; + slot = lane_to_slot[lane]; + + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 3: + if (FM1_DTSEC4 == i) + fm_info_set_phy_address(i, riser_phy_addr[0]); + if (FM1_DTSEC5 == i) + fm_info_set_phy_address(i, riser_phy_addr[1]); + + mdio_mux[i] = EMI1_SLOT3; + + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 5: + /* Slot housing a SGMII riser card? */ + fm_info_set_phy_address(i, riser_phy_addr[0]); + mdio_mux[i] = EMI1_SLOT5; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 6: + /* Slot housing a SGMII riser card? */ + fm_info_set_phy_address(i, riser_phy_addr[0]); + mdio_mux[i] = EMI1_SLOT6; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + case 7: + if (FM1_DTSEC1 == i) + fm_info_set_phy_address(i, riser_phy_addr[0]); + if (FM1_DTSEC2 == i) + fm_info_set_phy_address(i, riser_phy_addr[1]); + if (FM1_DTSEC3 == i) + fm_info_set_phy_address(i, riser_phy_addr[2]); + + mdio_mux[i] = EMI1_SLOT7; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); +} +void t1040_handle_phy_interface_rgmii(int i) +{ + fm_info_set_phy_address(i, i == FM1_DTSEC5 ? + CONFIG_SYS_FM1_DTSEC5_PHY_ADDR : + CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + mdio_mux[i] = (i == FM1_DTSEC5) ? EMI1_RGMII1 : + EMI1_RGMII0; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); +} + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + + printf("Initializing Fman\n"); + set_brdcfg9_for_gtx_clk(); + + initialize_lane_to_slot(); + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII0); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6); + t1040_qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); + + /* + * Program on board RGMII PHY addresses. If the SGMII Riser + * card used, we'll override the PHY address later. For any DTSEC that + * is RGMII, we'll also override its PHY address later. We assume that + * DTSEC4 and DTSEC5 are used for RGMII. + */ + fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR); + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_QSGMII: + break; + case PHY_INTERFACE_MODE_SGMII: + t1040_handle_phy_interface_sgmii(i); + break; + + case PHY_INTERFACE_MODE_RGMII: + /* Only DTSEC4 and DTSEC5 can be routed to RGMII */ + t1040_handle_phy_interface_rgmii(i); + break; + default: + break; + } + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index de3ea5c2aa..3dec4473e5 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -223,6 +223,7 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); #endif } diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index 76c0c94b0e..e51fb7a7f4 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -7,6 +7,7 @@ obj-y += t104xrdb.o obj-y += ddr.o +obj-y += eth.o obj-$(CONFIG_PCI) += pci.o obj-y += law.o obj-y += tlb.o diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index 11e03bd300..1da52bb0b0 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -164,14 +164,14 @@ NOR Flash memory Map 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB -0xED300000 0xEFF3FFFF rootfs (alt bank) 44MB + 256KB -0xEC800000 0xEC8FFFF Hardware device tree (alt bank) 1MB +0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB +0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB -0xE9300000 0xEBF3FFFF rootfs (current bank) 44MB + 256KB +0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB 0xE8000000 0xE801FFFF RCW (current bank) 128KB diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c new file mode 100644 index 0000000000..0188fd4090 --- /dev/null +++ b/board/freescale/t104xrdb/eth.c @@ -0,0 +1,72 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/immap_85xx.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <malloc.h> +#include <asm/fsl_dtsec.h> + +#include "../common/fman.h" + +int board_eth_init(bd_t *bis) +{ +#ifdef CONFIG_FMAN_ENET + struct memac_mdio_info memac_mdio_info; + unsigned int i; + int phy_addr = 0; + printf("Initializing Fman\n"); + + memac_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR; + memac_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the real 1G MDIO bus */ + fm_memac_mdio_init(bis, &memac_mdio_info); + + /* + * Program on board RGMII, SGMII PHY addresses. + */ + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1; + + switch (fm_info_get_enet_if(i)) { +#ifdef CONFIG_T1040RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1040RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); +#endif + case PHY_INTERFACE_MODE_RGMII: + if (FM1_DTSEC4 == i) + phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; + if (FM1_DTSEC5 == i) + phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; + fm_info_set_phy_address(i, phy_addr); + break; + case PHY_INTERFACE_MODE_QSGMII: + fm_info_set_phy_address(i, 0); + break; + case PHY_INTERFACE_MODE_NONE: + fm_info_set_phy_address(i, 0); + break; + default: + printf("Fman1: DTSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + } + + cpu_eth_init(bis); +#endif + + return pci_eth_init(bis); +} diff --git a/board/freescale/t2080qds/Makefile b/board/freescale/t208xqds/Makefile index 0b8747b877..947b7f7324 100644 --- a/board/freescale/t2080qds/Makefile +++ b/board/freescale/t208xqds/Makefile @@ -4,8 +4,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_T2080QDS) += t2080qds.o -obj-$(CONFIG_T2080QDS) += eth_t2080qds.o +obj-$(CONFIG_T2080QDS) += t208xqds.o +obj-$(CONFIG_T2080QDS) += eth_t208xqds.o +obj-$(CONFIG_T2081QDS) += t208xqds.o +obj-$(CONFIG_T2081QDS) += eth_t208xqds.o obj-$(CONFIG_PCI) += pci.o obj-y += ddr.o obj-y += law.o diff --git a/board/freescale/t2080qds/ddr.c b/board/freescale/t208xqds/ddr.c index ed1334d985..ed1334d985 100644 --- a/board/freescale/t2080qds/ddr.c +++ b/board/freescale/t208xqds/ddr.c diff --git a/board/freescale/t2080qds/ddr.h b/board/freescale/t208xqds/ddr.h index 9fc879a4ef..9fc879a4ef 100644 --- a/board/freescale/t2080qds/ddr.h +++ b/board/freescale/t208xqds/ddr.h diff --git a/board/freescale/t2080qds/eth_t2080qds.c b/board/freescale/t208xqds/eth_t208xqds.c index 3e4ab8fa57..7d8411bef7 100644 --- a/board/freescale/t2080qds/eth_t2080qds.c +++ b/board/freescale/t208xqds/eth_t208xqds.c @@ -25,21 +25,30 @@ #include <asm/fsl_serdes.h> #include "../common/qixis.h" #include "../common/fman.h" -#include "t2080qds_qixis.h" +#include "t208xqds_qixis.h" #define EMI_NONE 0xFFFFFFFF #define EMI1_RGMII1 0 #define EMI1_RGMII2 1 #define EMI1_SLOT1 2 +#if defined(CONFIG_T2080QDS) #define EMI1_SLOT2 6 #define EMI1_SLOT3 3 #define EMI1_SLOT4 4 #define EMI1_SLOT5 5 -#define EMI2 7 +#elif defined(CONFIG_T2081QDS) +#define EMI1_SLOT2 3 +#define EMI1_SLOT3 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT6 6 +#define EMI1_SLOT7 7 +#endif +#define EMI2 8 static int mdio_mux[NUM_FM_PORTS]; static const char * const mdio_names[] = { +#if defined(CONFIG_T2080QDS) "T2080QDS_MDIO_RGMII1", "T2080QDS_MDIO_RGMII2", "T2080QDS_MDIO_SLOT1", @@ -48,12 +57,27 @@ static const char * const mdio_names[] = { "T2080QDS_MDIO_SLOT5", "T2080QDS_MDIO_SLOT2", "T2080QDS_MDIO_10GC", +#elif defined(CONFIG_T2081QDS) + "T2081QDS_MDIO_RGMII1", + "T2081QDS_MDIO_RGMII2", + "T2081QDS_MDIO_SLOT1", + "T2081QDS_MDIO_SLOT2", + "T2081QDS_MDIO_SLOT3", + "T2081QDS_MDIO_SLOT5", + "T2081QDS_MDIO_SLOT6", + "T2081QDS_MDIO_SLOT7", + "T2081QDS_MDIO_10GC", +#endif }; /* Map SerDes1 8 lanes to default slot, will be initialized dynamically */ +#if defined(CONFIG_T2080QDS) static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1}; +#elif defined(CONFIG_T2081QDS) +static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1}; +#endif -static const char *T2080qds_mdio_name_for_muxval(u8 muxval) +static const char *t208xqds_mdio_name_for_muxval(u8 muxval) { return mdio_names[muxval]; } @@ -61,7 +85,7 @@ static const char *T2080qds_mdio_name_for_muxval(u8 muxval) struct mii_dev *mii_dev_for_muxval(u8 muxval) { struct mii_dev *bus; - const char *name = T2080qds_mdio_name_for_muxval(muxval); + const char *name = t208xqds_mdio_name_for_muxval(muxval); if (!name) { printf("No bus for muxval %x\n", muxval); @@ -78,15 +102,15 @@ struct mii_dev *mii_dev_for_muxval(u8 muxval) return bus; } -struct T2080qds_mdio { +struct t208xqds_mdio { u8 muxval; struct mii_dev *realbus; }; -static void T2080qds_mux_mdio(u8 muxval) +static void t208xqds_mux_mdio(u8 muxval) { u8 brdcfg4; - if (muxval < 7) { + if (muxval < 8) { brdcfg4 = QIXIS_READ(brdcfg[4]); brdcfg4 &= ~BRDCFG4_EMISEL_MASK; brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); @@ -94,54 +118,54 @@ static void T2080qds_mux_mdio(u8 muxval) } } -static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad, +static int t208xqds_mdio_read(struct mii_dev *bus, int addr, int devad, int regnum) { - struct T2080qds_mdio *priv = bus->priv; + struct t208xqds_mdio *priv = bus->priv; - T2080qds_mux_mdio(priv->muxval); + t208xqds_mux_mdio(priv->muxval); return priv->realbus->read(priv->realbus, addr, devad, regnum); } -static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad, +static int t208xqds_mdio_write(struct mii_dev *bus, int addr, int devad, int regnum, u16 value) { - struct T2080qds_mdio *priv = bus->priv; + struct t208xqds_mdio *priv = bus->priv; - T2080qds_mux_mdio(priv->muxval); + t208xqds_mux_mdio(priv->muxval); return priv->realbus->write(priv->realbus, addr, devad, regnum, value); } -static int T2080qds_mdio_reset(struct mii_dev *bus) +static int t208xqds_mdio_reset(struct mii_dev *bus) { - struct T2080qds_mdio *priv = bus->priv; + struct t208xqds_mdio *priv = bus->priv; return priv->realbus->reset(priv->realbus); } -static int T2080qds_mdio_init(char *realbusname, u8 muxval) +static int t208xqds_mdio_init(char *realbusname, u8 muxval) { - struct T2080qds_mdio *pmdio; + struct t208xqds_mdio *pmdio; struct mii_dev *bus = mdio_alloc(); if (!bus) { - printf("Failed to allocate T2080QDS MDIO bus\n"); + printf("Failed to allocate t208xqds MDIO bus\n"); return -1; } pmdio = malloc(sizeof(*pmdio)); if (!pmdio) { - printf("Failed to allocate T2080QDS private data\n"); + printf("Failed to allocate t208xqds private data\n"); free(bus); return -1; } - bus->read = T2080qds_mdio_read; - bus->write = T2080qds_mdio_write; - bus->reset = T2080qds_mdio_reset; - sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval)); + bus->read = t208xqds_mdio_read; + bus->write = t208xqds_mdio_write; + bus->reset = t208xqds_mdio_reset; + sprintf(bus->name, t208xqds_mdio_name_for_muxval(muxval)); pmdio->realbus = miiphy_get_dev_by_name(realbusname); @@ -154,7 +178,6 @@ static int T2080qds_mdio_init(char *realbusname, u8 muxval) pmdio->muxval = muxval; bus->priv = pmdio; - return mdio_register(bus); } @@ -173,13 +196,20 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { phy = fm_info_get_phy_address(port); switch (port) { +#if defined(CONFIG_T2080QDS) case FM1_DTSEC1: case FM1_DTSEC2: case FM1_DTSEC9: case FM1_DTSEC10: - sprintf(alias, "phy_sgmii_s3_%x", phy); - fdt_set_phy_handle(fdt, compat, addr, alias); - fdt_status_okay_by_alias(fdt, "emi1_slot3"); + if (mdio_mux[port] == EMI1_SLOT2) { + sprintf(alias, "phy_sgmii_s2_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + } else if (mdio_mux[port] == EMI1_SLOT3) { + sprintf(alias, "phy_sgmii_s3_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + } break; case FM1_DTSEC5: case FM1_DTSEC6: @@ -193,6 +223,36 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, fdt_status_okay_by_alias(fdt, "emi1_slot2"); } break; +#elif defined(CONFIG_T2081QDS) + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + if (mdio_mux[port] == EMI1_SLOT2) { + sprintf(alias, "phy_sgmii_s2_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + } else if (mdio_mux[port] == EMI1_SLOT3) { + sprintf(alias, "phy_sgmii_s3_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + } else if (mdio_mux[port] == EMI1_SLOT5) { + sprintf(alias, "phy_sgmii_s5_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot5"); + } else if (mdio_mux[port] == EMI1_SLOT6) { + sprintf(alias, "phy_sgmii_s6_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot6"); + } else if (mdio_mux[port] == EMI1_SLOT7) { + sprintf(alias, "phy_sgmii_s7_%x", phy); + fdt_set_phy_handle(fdt, compat, addr, alias); + fdt_status_okay_by_alias(fdt, "emi1_slot7"); + } + break; +#endif default: break; } @@ -226,8 +286,8 @@ void fdt_fixup_board_enet(void *fdt) } /* - * This function reads RCW to check if Serdes1{E,F,G,H} is configured - * as slot 1/2/3 and update the lane_to_slot[] array accordingly + * This function reads RCW to check if Serdes1{A:H} is configured + * to slot 1/2/3/4/5/6/7 and update the lane_to_slot[] array accordingly */ static void initialize_lane_to_slot(void) { @@ -238,6 +298,7 @@ static void initialize_lane_to_slot(void) srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; switch (srds_s1) { +#if defined(CONFIG_T2080QDS) case 0x51: case 0x5f: case 0x65: @@ -264,6 +325,31 @@ static void initialize_lane_to_slot(void) lane_to_slot[6] = 3; lane_to_slot[7] = 3; break; +#elif defined(CONFIG_T2081QDS) + case 0x6b: + lane_to_slot[4] = 1; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xca: + case 0xcb: + lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; + lane_to_slot[5] = 3; + lane_to_slot[6] = 3; + lane_to_slot[7] = 3; + break; + case 0xf2: + lane_to_slot[1] = 7; + lane_to_slot[2] = 7; + lane_to_slot[3] = 7; + lane_to_slot[5] = 4; + lane_to_slot[6] = 3; + lane_to_slot[7] = 7; + break; +#endif default: break; } @@ -305,14 +391,20 @@ int board_eth_init(bd_t *bis) fm_memac_mdio_init(bis, &tgec_mdio_info); /* Register the muxing front-ends to the MDIO buses */ - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); - T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); - T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); +#if defined(CONFIG_T2080QDS) + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); +#endif + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); +#if defined(CONFIG_T2081QDS) + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6); + t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); +#endif + t208xqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); /* Set the two on-board RGMII PHY address */ fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR); @@ -327,21 +419,21 @@ int board_eth_init(bd_t *bis) case 0x95: case 0xa2: case 0x94: - /* SGMII in Slot3 */ + /* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot2 */ fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); - /* SGMII in Slot2 */ + /* T2080QDS: SGMII in Slot2; T2081QDS: SGMII in Slot1 */ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); break; case 0x51: case 0x5f: case 0x65: - /* XAUI/HiGig in Slot3 */ + /* T2080QDS: XAUI/HiGig in Slot3; T2081QDS: in Slot2 */ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); - /* SGMII in Slot2 */ + /* T2080QDS: SGMII in Slot2; T2081QDS: in Slot3 */ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); break; @@ -365,7 +457,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_10GEC2, 5); fm_info_set_phy_address(FM1_10GEC3, 6); fm_info_set_phy_address(FM1_10GEC4, 7); - /* SGMII in Slot2 */ + /* T2080QDS: SGMII in Slot2; T2081QDS: in Slot3 */ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); break; @@ -373,7 +465,7 @@ int board_eth_init(bd_t *bis) case 0x6d: fm_info_set_phy_address(FM1_10GEC1, 4); fm_info_set_phy_address(FM1_10GEC2, 5); - /* SGMII in Slot3 */ + /* T2080QDS: SGMII in Slot3; T2081QDS: in Slot2 */ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); break; @@ -408,6 +500,7 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); break; +#if defined(CONFIG_T2080QDS) case 0xd9: case 0xd3: case 0xcb: @@ -419,6 +512,27 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); break; +#elif defined(CONFIG_T2081QDS) + case 0xca: + case 0xcb: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + /* SGMII in Slot5 */ + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR); + /* SGMII in Slot6 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + /* SGMII in Slot7 */ + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + break; +#endif + case 0xf2: + /* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot7 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR); + break; default: break; } @@ -452,8 +566,25 @@ int board_eth_init(bd_t *bis) case 3: mdio_mux[i] = EMI1_SLOT3; fm_info_set_mdio(i, mii_dev_for_muxval( - mdio_mux[i])); + mdio_mux[i])); + break; +#if defined(CONFIG_T2081QDS) + case 5: + mdio_mux[i] = EMI1_SLOT5; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 6: + mdio_mux[i] = EMI1_SLOT6; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); + break; + case 7: + mdio_mux[i] = EMI1_SLOT7; + fm_info_set_mdio(i, mii_dev_for_muxval( + mdio_mux[i])); break; +#endif } break; case PHY_INTERFACE_MODE_RGMII: diff --git a/board/freescale/t2080qds/law.c b/board/freescale/t208xqds/law.c index 74e2a53a8f..74e2a53a8f 100644 --- a/board/freescale/t2080qds/law.c +++ b/board/freescale/t208xqds/law.c diff --git a/board/freescale/t2080qds/pci.c b/board/freescale/t208xqds/pci.c index 84a89dad4f..84a89dad4f 100644 --- a/board/freescale/t2080qds/pci.c +++ b/board/freescale/t208xqds/pci.c diff --git a/board/freescale/t2080qds/t2080_rcw.cfg b/board/freescale/t208xqds/t2080_rcw.cfg index c2ad0fda55..c2ad0fda55 100644 --- a/board/freescale/t2080qds/t2080_rcw.cfg +++ b/board/freescale/t208xqds/t2080_rcw.cfg diff --git a/board/freescale/t208xqds/t2081_rcw.cfg b/board/freescale/t208xqds/t2081_rcw.cfg new file mode 100644 index 0000000000..a2d5ecf4ad --- /dev/null +++ b/board/freescale/t208xqds/t2081_rcw.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +#Default SerDes Protocol: 0x6C +#Core/DDR: 1533Mhz/2133MT/s +12100017 15000000 00000000 00000000 +6c000002 00008000 e8104000 c1000000 +00000000 00000000 00000000 000307fc +00000000 00000000 00000000 00000004 diff --git a/board/freescale/t2080qds/t2080_pbi.cfg b/board/freescale/t208xqds/t208x_pbi.cfg index e200d926fb..e200d926fb 100644 --- a/board/freescale/t2080qds/t2080_pbi.cfg +++ b/board/freescale/t208xqds/t208x_pbi.cfg diff --git a/board/freescale/t2080qds/t2080qds.c b/board/freescale/t208xqds/t208xqds.c index 4fe8ccb54c..9cfc0bd7c3 100644 --- a/board/freescale/t2080qds/t2080qds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -20,8 +20,8 @@ #include "../common/qixis.h" #include "../common/vsc3316_3308.h" -#include "t2080qds.h" -#include "t2080qds_qixis.h" +#include "t208xqds.h" +#include "t208xqds_qixis.h" DECLARE_GLOBAL_DATA_PTR; @@ -89,19 +89,22 @@ int select_i2c_ch_pca9547(u8 ch) int brd_mux_lane_to_slot(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 srds_prtcl_s1, srds_prtcl_s2; + u32 srds_prtcl_s1; srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & +#if defined(CONFIG_T2080QDS) + u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; +#endif switch (srds_prtcl_s1) { case 0: /* SerDes1 is not enabled */ break; +#if defined(CONFIG_T2080QDS) case 0x1c: case 0xa2: /* SD1(A:D) => SLOT3 SGMII @@ -180,12 +183,89 @@ int brd_mux_lane_to_slot(void) */ QIXIS_WRITE(brdcfg[12], 0x1a); break; +#elif defined(CONFIG_T2081QDS) + case 0x51: + /* SD1(A:D) => SLOT2 XAUI + * SD1(E) => SLOT1 PCIe4 x1 + * SD1(F:H) => SLOT3 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x98); + QIXIS_WRITE(brdcfg[13], 0x70); + break; + case 0x6b: + /* SD1(A:D) => XFI SFP Module + * SD1(E) => SLOT1 PCIe4 x1 + * SD1(F:H) => SLOT3 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x80); + QIXIS_WRITE(brdcfg[13], 0x70); + break; + case 0x6c: + /* SD1(A:B) => XFI SFP Module + * SD1(C:D) => SLOT2 SGMII + * SD1(E:H) => SLOT1 PCIe4 x4 + */ + QIXIS_WRITE(brdcfg[12], 0xe8); + QIXIS_WRITE(brdcfg[13], 0x0); + break; + case 0x6d: + /* SD1(A:B) => XFI SFP Module + * SD1(C:D) => SLOT2 SGMII + * SD1(E:H) => SLOT1 PCIe4 x4 + */ + QIXIS_WRITE(brdcfg[12], 0xe8); + QIXIS_WRITE(brdcfg[13], 0x0); + break; + case 0xaa: + case 0xab: + /* SD1(A:D) => SLOT2 PCIe3 x4 + * SD1(F:H) => SLOT1 SGMI4 x4 + */ + QIXIS_WRITE(brdcfg[12], 0xf8); + QIXIS_WRITE(brdcfg[13], 0x0); + break; + case 0xca: + case 0xcb: + /* SD1(A) => SLOT2 PCIe3 x1 + * SD1(B) => SLOT7 SGMII + * SD1(C) => SLOT6 SGMII + * SD1(D) => SLOT5 SGMII + * SD1(E) => SLOT1 PCIe4 x1 + * SD1(F:H) => SLOT3 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x80); + QIXIS_WRITE(brdcfg[13], 0x70); + break; + case 0xde: + case 0xdf: + /* SD1(A:D) => SLOT2 PCIe3 x4 + * SD1(E) => SLOT1 PCIe4 x1 + * SD1(F) => SLOT4 PCIe1 x1 + * SD1(G) => SLOT3 PCIe2 x1 + * SD1(H) => SLOT7 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x98); + QIXIS_WRITE(brdcfg[13], 0x25); + break; + case 0xf2: + /* SD1(A) => SLOT2 PCIe3 x1 + * SD1(B:D) => SLOT7 SGMII + * SD1(E) => SLOT1 PCIe4 x1 + * SD1(F) => SLOT4 PCIe1 x1 + * SD1(G) => SLOT3 PCIe2 x1 + * SD1(H) => SLOT7 SGMII + */ + QIXIS_WRITE(brdcfg[12], 0x81); + QIXIS_WRITE(brdcfg[13], 0xa5); + break; +#endif default: printf("WARNING: unsupported for SerDes1 Protocol %d\n", srds_prtcl_s1); return -1; } +#ifdef CONFIG_T2080QDS switch (srds_prtcl_s2) { case 0: /* SerDes2 is not enabled */ @@ -241,6 +321,7 @@ int brd_mux_lane_to_slot(void) srds_prtcl_s2); return -1; } +#endif return 0; } diff --git a/board/freescale/t2080qds/t2080qds.h b/board/freescale/t208xqds/t208xqds.h index 39fcef28c3..39fcef28c3 100644 --- a/board/freescale/t2080qds/t2080qds.h +++ b/board/freescale/t208xqds/t208xqds.h diff --git a/board/freescale/t2080qds/t2080qds_qixis.h b/board/freescale/t208xqds/t208xqds_qixis.h index fc83da707f..bdcdc12f59 100644 --- a/board/freescale/t2080qds/t2080qds_qixis.h +++ b/board/freescale/t208xqds/t208xqds_qixis.h @@ -4,10 +4,10 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __T2080QDS_QIXIS_H__ -#define __T2080QDS_QIXIS_H__ +#ifndef __T208xQDS_QIXIS_H__ +#define __T208xQDS_QIXIS_H__ -/* Definitions of QIXIS Registers for T2080QDS */ +/* Definitions of QIXIS Registers for T208xQDS */ #define QIXIS_SRDS1CLK_122 0x5a #define QIXIS_SRDS1CLK_125 0x5e @@ -35,6 +35,8 @@ #define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */ +#define BRDCFG9_SFP_TX_EN 0x10 + #define BRDCFG12_SD3EN_MASK 0x20 #define BRDCFG12_SD3MX_MASK 0x08 #define BRDCFG12_SD3MX_SLOT5 0x08 diff --git a/board/freescale/t2080qds/tlb.c b/board/freescale/t208xqds/tlb.c index 62cd11033a..62cd11033a 100644 --- a/board/freescale/t2080qds/tlb.c +++ b/board/freescale/t208xqds/tlb.c diff --git a/board/h2200/Makefile b/board/h2200/Makefile index d4fa15344c..e516e916b4 100644 --- a/board/h2200/Makefile +++ b/board/h2200/Makefile @@ -10,5 +10,5 @@ obj-y := h2200.o extra-y := h2200-header.bin -$(obj)h2200-header.bin: $(obj)h2200-header.o +$(obj)/h2200-header.bin: $(obj)/h2200-header.o $(OBJCOPY) -O binary $< $@ diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 703dbeccfd..17c122cf50 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -325,8 +325,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_32K), (IEN | PTD | EN | M4)) \ MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(SYS_NIRQ), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(SYS_NRESWARM), (IEN | PTU | DIS | M4)) \ - /* SYS_nRESWARM */\ MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) \ MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) \ MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) \ diff --git a/board/hymod/config.mk b/board/hymod/config.mk index abcd2d50ac..ee15890c5b 100644 --- a/board/hymod/config.mk +++ b/board/hymod/config.mk @@ -11,4 +11,4 @@ PLATFORM_CPPFLAGS += -I$(TOPDIR) -OBJCFLAGS = --remove-section=.ppcenv +OBJCOPYFLAGS = --remove-section=.ppcenv diff --git a/board/ip04/config.mk b/board/ip04/config.mk index ae2ea0b747..bc0e7476e5 100644 --- a/board/ip04/config.mk +++ b/board/ip04/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c index 089a835e0c..9f8fcf2c1c 100644 --- a/board/isee/igep0033/board.c +++ b/board/isee/igep0033/board.c @@ -116,7 +116,7 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 0, .phy_if = PHY_INTERFACE_MODE_RMII, }, }; diff --git a/board/keymile/km_arm/fpga_config.c b/board/keymile/km_arm/fpga_config.c index cbfc7d2175..51a3cfe647 100644 --- a/board/keymile/km_arm/fpga_config.c +++ b/board/keymile/km_arm/fpga_config.c @@ -189,6 +189,31 @@ int wait_for_fpga_config(void) return 0; } +#if defined(KM_PCIE_RESET_MPP7) + +#define KM_PEX_RST_GPIO_PIN 7 +int fpga_reset(void) +{ + if (!check_boco2()) { + /* we do not have BOCO2, this is not really used */ + return 0; + } + + printf("PCIe reset through GPIO7: "); + /* apply PCIe reset via GPIO */ + kw_gpio_set_valid(KM_PEX_RST_GPIO_PIN, 1); + kw_gpio_direction_output(KM_PEX_RST_GPIO_PIN, 1); + kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 0); + udelay(1000*10); + kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 1); + + printf(" done\n"); + + return 0; +} + +#else + #define PRST1 0x4 #define PCIE_RST 0x10 #define TRAFFIC_RST 0x04 @@ -219,6 +244,7 @@ int fpga_reset(void) return 0; } +#endif /* the FPGA was configured, we configure the BOCO2 so that the EEPROM * is available from the Bobcat SPI bus */ diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 5620737bf0..35402c800b 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -46,7 +46,11 @@ static const u32 kwmpp_config[] = { MPP4_NF_IO6, MPP5_NF_IO7, MPP6_SYSRST_OUTn, +#if defined(KM_PCIE_RESET_MPP7) + MPP7_GPO, +#else MPP7_PEX_RST_OUTn, +#endif #if defined(CONFIG_SYS_I2C_SOFT) MPP8_GPIO, /* SDA */ MPP9_GPIO, /* SCL */ @@ -102,7 +106,7 @@ static const u32 kwmpp_config[] = { /* * Wait for startup OK from mgcoge3ne */ -int startup_allowed(void) +static int startup_allowed(void) { unsigned char buf; @@ -164,7 +168,6 @@ static int initialize_unit_leds(void) return 0; } -#if defined(CONFIG_BOOTCOUNT_LIMIT) static void set_bootcount_addr(void) { uchar buf[32]; @@ -173,7 +176,6 @@ static void set_bootcount_addr(void) sprintf((char *)buf, "0x%x", bootcountaddr); setenv("bootcountaddr", (char *)buf); } -#endif int misc_init_r(void) { @@ -210,9 +212,7 @@ int misc_init_r(void) initialize_unit_leds(); set_km_env(); -#if defined(CONFIG_BOOTCOUNT_LIMIT) set_bootcount_addr(); -#endif return 0; } @@ -322,15 +322,15 @@ void reset_phy(void) return; /* RGMII clk transition on data stable */ - if (!miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, ®)) + if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, ®)) printf("Error reading PHY spec ctrl reg\n"); - if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, - reg | PHY_RGMII_CLK_STABLE | PHY_CLSA)) + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, + reg | PHY_RGMII_CLK_STABLE | PHY_CLSA)) printf("Error writing PHY spec ctrl reg\n"); /* leds setup */ - if (!miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG, - PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT)) + if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG, + PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT)) printf("Error writing PHY LED reg\n"); /* reset the phy */ diff --git a/board/keymile/kmp204x/Makefile b/board/keymile/kmp204x/Makefile index 3e69ee2f15..c57ca08e14 100644 --- a/board/keymile/kmp204x/Makefile +++ b/board/keymile/kmp204x/Makefile @@ -8,5 +8,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o \ +obj-y := kmp204x.o ddr.o eth.o tlb.o pci.o law.o qrio.o \ ../common/common.o ../common/ivm.o diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index f02642aece..95a19cdb2c 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -33,12 +33,51 @@ int checkboard(void) return 0; } -/* TODO: implement the I2C deblocking function */ -int i2c_make_abort(void) +/* I2C deblocking uses the algorithm defined in board/keymile/common/common.c + * 2 dedicated QRIO GPIOs externally pull the SCL and SDA lines + * For I2C only the low state is activly driven and high state is pulled-up + * by a resistor. Therefore the deblock GPIOs are used + * -> as an active output to drive a low state + * -> as an open-drain input to have a pulled-up high state + */ + +/* QRIO GPIOs used for deblocking */ +#define DEBLOCK_PORT1 GPIO_A +#define DEBLOCK_SCL1 20 +#define DEBLOCK_SDA1 21 + +/* By default deblock GPIOs are floating */ +static void i2c_deblock_gpio_cfg(void) +{ + /* set I2C bus 1 deblocking GPIOs input, but 0 value for open drain */ + qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SCL1); + qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SDA1); + + qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, 0); + qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, 0); +} + +void set_sda(int state) +{ + qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, state); +} + +void set_scl(int state) +{ + qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, state); +} + +int get_sda(void) +{ + return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1); +} + +int get_scl(void) { - return 1; + return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1); } + #define ZL30158_RST 8 #define ZL30343_RST 9 @@ -62,6 +101,7 @@ int board_early_init_f(void) int board_early_init_r(void) { + int ret = 0; /* Flush d-cache and invalidate i-cache of any FLASH data */ flush_dcache(); invalidate_icache(); @@ -69,7 +109,11 @@ int board_early_init_r(void) set_liodns(); setup_portals(); - return 0; + ret = trigger_fpga_config(); + if (ret) + printf("error triggering PCIe FPGA config\n"); + + return ret; } unsigned long get_board_sys_clk(unsigned long dummy) @@ -77,80 +121,12 @@ unsigned long get_board_sys_clk(unsigned long dummy) return 66666666; } -#define WDMASK_OFF 0x16 - -static void qrio_wdmask(u8 bit, bool wden) -{ - u16 wdmask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - wdmask = in_be16(qrio_base + WDMASK_OFF); - - if (wden) - wdmask |= (1 << bit); - else - wdmask &= ~(1 << bit); - - out_be16(qrio_base + WDMASK_OFF, wdmask); -} - -#define PRST_OFF 0x1a - -void qrio_prst(u8 bit, bool en, bool wden) -{ - u16 prst; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - qrio_wdmask(bit, wden); - - prst = in_be16(qrio_base + PRST_OFF); - - if (en) - prst &= ~(1 << bit); - else - prst |= (1 << bit); - - out_be16(qrio_base + PRST_OFF, prst); -} - -#define PRSTCFG_OFF 0x1c - -void qrio_prstcfg(u8 bit, u8 mode) -{ - u32 prstcfg; - u8 i; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - prstcfg = in_be32(qrio_base + PRSTCFG_OFF); - - for (i = 0; i < 2; i++) { - if (mode & (1<<i)) - set_bit(2*bit+i, &prstcfg); - else - clear_bit(2*bit+i, &prstcfg); - } - - out_be32(qrio_base + PRSTCFG_OFF, prstcfg); -} - - -#define BOOTCOUNT_OFF 0x12 - -void bootcount_store(ulong counter) +int misc_init_f(void) { - u8 val; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - - val = (counter <= 255) ? (u8)counter : 255; - out_8(qrio_base + BOOTCOUNT_OFF, val); -} + /* configure QRIO pis for i2c deblocking */ + i2c_deblock_gpio_cfg(); -ulong bootcount_load(void) -{ - u8 val; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; - val = in_8(qrio_base + BOOTCOUNT_OFF); - return val; + return 0; } #define NUM_SRDS_BANKS 2 diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h index b6ba672413..0267596e4e 100644 --- a/board/keymile/kmp204x/kmp204x.h +++ b/board/keymile/kmp204x/kmp204x.h @@ -5,6 +5,16 @@ * SPDX-License-Identifier: GPL-2.0+ */ +/* QRIO GPIO ports */ +#define GPIO_A 0x40 +#define GPIO_B 0x60 + +int qrio_get_gpio(u8 port_off, u8 gpio_nr); +void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val); +void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value); +void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value); +void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr); + #define PRSTCFG_POWUP_UNIT_CORE_RST 0x0 #define PRSTCFG_POWUP_UNIT_RST 0x1 #define PRSTCFG_POWUP_RST 0x3 diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg index f38dcf9c8c..9af8bd5b57 100644 --- a/board/keymile/kmp204x/pbi.cfg +++ b/board/keymile/kmp204x/pbi.cfg @@ -8,6 +8,16 @@ # #PBI commands +#Workaround for A-006559 needed for rev 2.0 of P2041 silicon +#Freescale's errarta sheet suggests it may be done with PBI +09000010 00000000 +09000014 00000000 +09000018 81d00000 +09021008 0000f000 +09021028 0000f000 +09021048 0000f000 +09021068 0000f000 +09000018 00000000 #Initialize CPC1 as 1MB SRAM 09010000 00200400 09138000 00000000 diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c index ec20c8afb4..a484eb5749 100644 --- a/board/keymile/kmp204x/pci.c +++ b/board/keymile/kmp204x/pci.c @@ -14,18 +14,103 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/fsl_serdes.h> +#include <asm/errno.h> #include "kmp204x.h" +#define PROM_SEL_L 11 +/* control the PROM_SEL_L signal*/ +static void toggle_fpga_eeprom_bus(bool cpu_own) +{ + qrio_gpio_direction_output(GPIO_A, PROM_SEL_L, !cpu_own); +} + +#define CONF_SEL_L 10 +#define FPGA_PROG_L 19 +#define FPGA_DONE 18 +#define FPGA_INIT_L 17 + +int trigger_fpga_config(void) +{ + int ret = 0, init_l; + /* approx 10ms */ + u32 timeout = 10000; + + /* make sure the FPGA_can access the EEPROM */ + toggle_fpga_eeprom_bus(false); + + /* assert CONF_SEL_L to be able to drive FPGA_PROG_L */ + qrio_gpio_direction_output(GPIO_A, CONF_SEL_L, 0); + + /* trigger the config start */ + qrio_gpio_direction_output(GPIO_A, FPGA_PROG_L, 0); + + /* small delay for INIT_L line */ + udelay(10); + + /* wait for FPGA_INIT to be asserted */ + do { + init_l = qrio_get_gpio(GPIO_A, FPGA_INIT_L); + if (timeout-- == 0) { + printf("FPGA_INIT timeout\n"); + ret = -EFAULT; + break; + } + udelay(10); + } while (init_l); + + /* deassert FPGA_PROG, config should start */ + qrio_set_gpio(GPIO_A, FPGA_PROG_L, 1); + + return ret; +} + +/* poll the FPGA_DONE signal and give the EEPROM back to the QorIQ */ +static int wait_for_fpga_config(void) +{ + int ret = 0, done; + /* approx 5 s */ + u32 timeout = 500000; + + printf("PCIe FPGA config:"); + do { + done = qrio_get_gpio(GPIO_A, FPGA_DONE); + if (timeout-- == 0) { + printf(" FPGA_DONE timeout\n"); + ret = -EFAULT; + goto err_out; + } + udelay(10); + } while (!done); + + printf(" done\n"); + +err_out: + /* deactive CONF_SEL and give the CPU conf EEPROM access */ + qrio_set_gpio(GPIO_A, CONF_SEL_L, 1); + toggle_fpga_eeprom_bus(true); + + return ret; +} + #define PCIE_SW_RST 14 +#define PEXHC_SW_RST 13 #define HOOPER_SW_RST 12 void pci_init_board(void) { + /* first wait for the PCIe FPGA to be configured + * it has been triggered earlier in board_early_init_r */ + int ret = wait_for_fpga_config(); + if (ret) + printf("error finishing PCIe FPGA config\n"); + qrio_prst(PCIE_SW_RST, false, false); + qrio_prst(PEXHC_SW_RST, false, false); qrio_prst(HOOPER_SW_RST, false, false); /* Hooper is not direcly PCIe capable */ mdelay(50); + fsl_pcie_init_board(0); } diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c new file mode 100644 index 0000000000..49f9aa2546 --- /dev/null +++ b/board/keymile/kmp204x/qrio.c @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2013 Keymile AG + * Valentin Longchamp <valentin.longchamp@keymile.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +#include "../common/common.h" +#include "kmp204x.h" + +/* QRIO GPIO register offsets */ +#define DIRECT_OFF 0x18 +#define GPRT_OFF 0x1c + +int qrio_get_gpio(u8 port_off, u8 gpio_nr) +{ + u32 gprt; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + gprt = in_be32(qrio_base + port_off + GPRT_OFF); + + return (gprt >> gpio_nr) & 1U; +} + +void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value) +{ + u32 gprt, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + gprt = in_be32(qrio_base + port_off + GPRT_OFF); + if (value) + gprt |= mask; + else + gprt &= ~mask; + + out_be32(qrio_base + port_off + GPRT_OFF, gprt); +} + +void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + direct |= mask; + out_be32(qrio_base + port_off + DIRECT_OFF, direct); + + qrio_set_gpio(port_off, gpio_nr, value); +} + +void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + direct &= ~mask; + out_be32(qrio_base + port_off + DIRECT_OFF, direct); +} + +void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val) +{ + u32 direct, mask; + + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + mask = 1U << gpio_nr; + + direct = in_be32(qrio_base + port_off + DIRECT_OFF); + if (val == 0) + /* set to output -> GPIO drives low */ + direct |= mask; + else + /* set to input -> GPIO floating */ + direct &= ~mask; + + out_be32(qrio_base + port_off + DIRECT_OFF, direct); +} + +#define WDMASK_OFF 0x16 + +static void qrio_wdmask(u8 bit, bool wden) +{ + u16 wdmask; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + wdmask = in_be16(qrio_base + WDMASK_OFF); + + if (wden) + wdmask |= (1 << bit); + else + wdmask &= ~(1 << bit); + + out_be16(qrio_base + WDMASK_OFF, wdmask); +} + +#define PRST_OFF 0x1a + +void qrio_prst(u8 bit, bool en, bool wden) +{ + u16 prst; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + qrio_wdmask(bit, wden); + + prst = in_be16(qrio_base + PRST_OFF); + + if (en) + prst &= ~(1 << bit); + else + prst |= (1 << bit); + + out_be16(qrio_base + PRST_OFF, prst); +} + +#define PRSTCFG_OFF 0x1c + +void qrio_prstcfg(u8 bit, u8 mode) +{ + u32 prstcfg; + u8 i; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + prstcfg = in_be32(qrio_base + PRSTCFG_OFF); + + for (i = 0; i < 2; i++) { + if (mode & (1<<i)) + set_bit(2*bit+i, &prstcfg); + else + clear_bit(2*bit+i, &prstcfg); + } + + out_be32(qrio_base + PRSTCFG_OFF, prstcfg); +} diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg index f2b7fe3d42..2d4c48cb9c 100644 --- a/board/keymile/kmp204x/rcw_kmp204x.cfg +++ b/board/keymile/kmp204x/rcw_kmp204x.cfg @@ -7,5 +7,5 @@ aa55aa55 010e0100 #64 bytes RCW data 14600000 00000000 28200000 00000000 148E70CF CFC02000 58000000 41000000 -00000000 00000000 00000000 F4428002 +00000000 00000000 00000000 F0428002 00000000 00000000 00000000 00000000 diff --git a/board/keymile/scripts/develop-arm.txt b/board/keymile/scripts/develop-arm.txt index 922afea277..d3c974f1f9 100644 --- a/board/keymile/scripts/develop-arm.txt +++ b/board/keymile/scripts/develop-arm.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=true diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt index a6bb1b1d4a..a80812a5d0 100644 --- a/board/keymile/scripts/develop-common.txt +++ b/board/keymile/scripts/develop-common.txt @@ -3,6 +3,7 @@ bootcmd=run ${subbootcmds} configure=run set_uimage; km_setboardid && saveenv && reset subbootcmds=tftpfdt tftpkernel nfsargs add_default boot nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch} +tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} toolchain=/opt/eldk rootfssize=0 diff --git a/board/keymile/scripts/develop-ppc_82xx.txt b/board/keymile/scripts/develop-ppc_82xx.txt index 909f6a3cee..d3c974f1f9 100644 --- a/board/keymile/scripts/develop-ppc_82xx.txt +++ b/board/keymile/scripts/develop-ppc_82xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/keymile/scripts/develop-ppc_8xx.txt b/board/keymile/scripts/develop-ppc_8xx.txt index 909f6a3cee..d3c974f1f9 100644 --- a/board/keymile/scripts/develop-ppc_8xx.txt +++ b/board/keymile/scripts/develop-ppc_8xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/keymile/scripts/ramfs-arm.txt b/board/keymile/scripts/ramfs-arm.txt index 79974f1b70..87e984e179 100644 --- a/board/keymile/scripts/ramfs-arm.txt +++ b/board/keymile/scripts/ramfs-arm.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=true diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt index 502c8631f4..d79ad2e21b 100644 --- a/board/keymile/scripts/ramfs-common.txt +++ b/board/keymile/scripts/ramfs-common.txt @@ -7,6 +7,7 @@ nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} configure=run set_uimage; km_setboardid && saveenv && reset rootfsfile=${hostname}/rootfsImage setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value} +tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage set_uimage=printenv uimage || setenv uimage uImage diff --git a/board/keymile/scripts/ramfs-ppc_82xx.txt b/board/keymile/scripts/ramfs-ppc_82xx.txt index 970927a2fa..87e984e179 100644 --- a/board/keymile/scripts/ramfs-ppc_82xx.txt +++ b/board/keymile/scripts/ramfs-ppc_82xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/keymile/scripts/ramfs-ppc_8xx.txt b/board/keymile/scripts/ramfs-ppc_8xx.txt index 970927a2fa..87e984e179 100644 --- a/board/keymile/scripts/ramfs-ppc_8xx.txt +++ b/board/keymile/scripts/ramfs-ppc_8xx.txt @@ -1,2 +1 @@ setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure -tftpfdt=tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb diff --git a/board/matrix_vision/mvblm7/Makefile b/board/matrix_vision/mvblm7/Makefile index 879d794655..1bc1d61dcf 100644 --- a/board/matrix_vision/mvblm7/Makefile +++ b/board/matrix_vision/mvblm7/Makefile @@ -8,5 +8,5 @@ obj-y := mvblm7.o pci.o fpga.o extra-y := bootscript.img -$(obj)bootscript.img: - @mkimage -T script -C none -n M7_script -d bootscript $@ +$(obj)/bootscript.img: $(src)/bootscript + @mkimage -T script -C none -n M7_script -d $< $@ diff --git a/board/matrix_vision/mvblx/Makefile b/board/matrix_vision/mvblx/Makefile index c6c0933956..c056ebaf78 100644 --- a/board/matrix_vision/mvblx/Makefile +++ b/board/matrix_vision/mvblx/Makefile @@ -8,4 +8,4 @@ obj-y += mvblx.o fpga.o obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o -CFLAGS += -Werror +ccflags-y += -Werror diff --git a/board/matrix_vision/mvsmr/Makefile b/board/matrix_vision/mvsmr/Makefile index b6a4f6754b..9454259c17 100644 --- a/board/matrix_vision/mvsmr/Makefile +++ b/board/matrix_vision/mvsmr/Makefile @@ -12,5 +12,5 @@ obj-y := mvsmr.o fpga.o extra-y := bootscript.img -$(obj)bootscript.img: bootscript +$(obj)/bootscript.img: $(src)/bootscript @mkimage -T script -C none -n mvSMR_Script -d $< $@ diff --git a/board/mpl/vcma9/lowlevel_init.S b/board/mpl/vcma9/lowlevel_init.S index b889cf94af..cca9c0c880 100644 --- a/board/mpl/vcma9/lowlevel_init.S +++ b/board/mpl/vcma9/lowlevel_init.S @@ -197,13 +197,10 @@ #define REFCNT_266 0 /**************************************/ -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* use r0 to relocate DATA read/write to flash rather than memory ! */ - ldr r0, _TEXT_BASE + ldr r0, =CONFIG_SYS_TEXT_BASE ldr r13, =BWSCON /* enable minimal access to PLD */ diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h index 4a230dd596..0d2f0a54c5 100644 --- a/board/nokia/rx51/rx51.h +++ b/board/nokia/rx51/rx51.h @@ -22,8 +22,6 @@ struct emu_hal_params_rx51 { u32 param4; }; -int print_cpuinfo(void); - /* * IEN - Input Enable * IDIS - Input Disable diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile index e3fcf2bdff..e3b2651570 100644 --- a/board/nvidia/common/Makefile +++ b/board/nvidia/common/Makefile @@ -1,4 +1,4 @@ # Copyright (c) 2011 The Chromium OS Authors. # SPDX-License-Identifier: GPL-2.0+ -include common.mk +include $(src)/common.mk diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index e650feda48..3b18e28cc4 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -67,12 +67,14 @@ void __gpio_early_init_uart(void) void gpio_early_init_uart(void) __attribute__((weak, alias("__gpio_early_init_uart"))); +#if defined(CONFIG_TEGRA_NAND) void __pin_mux_nand(void) { funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_DEFAULT); } void pin_mux_nand(void) __attribute__((weak, alias("__pin_mux_nand"))); +#endif void __pin_mux_display(void) { diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts deleted file mode 100644 index 435c01e9f6..0000000000 --- a/board/nvidia/dts/tegra114-dalmore.dts +++ /dev/null @@ -1,71 +0,0 @@ -/dts-v1/; - -#include "tegra114.dtsi" - -/ { - model = "NVIDIA Dalmore"; - compatible = "nvidia,dalmore", "nvidia,tegra114"; - - aliases { - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000400"; - usb0 = "/usb@7d008000"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x80000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <400000>; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - sdhci@78000400 { - cd-gpios = <&gpio 170 1>; /* gpio PV2 */ - bus-width = <4>; - status = "okay"; - }; - - sdhci@78000600 { - bus-width = <8>; - status = "okay"; - }; - - usb@7d008000 { - /* SPDIF_IN: USB_VBUS_EN1 */ - nvidia,vbus-gpio = <&gpio 86 0>; - status = "okay"; - }; -}; diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts deleted file mode 100644 index b115f87821..0000000000 --- a/board/nvidia/dts/tegra20-harmony.dts +++ /dev/null @@ -1,105 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Harmony evaluation board"; - compatible = "nvidia,harmony", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5004000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000200"; - }; - - memory { - reg = <0x00000000 0x40000000>; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; - - sdhci@c8000200 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - cd-gpios = <&gpio 58 1>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <8>; - }; - - lcd_panel: panel { - clock = <42430000>; - xres = <1024>; - yres = <600>; - left-margin = <138>; - right-margin = <34>; - hsync-len = <136>; - lower-margin = <4>; - upper-margin = <21>; - vsync-len = <4>; - hsync-active-high; - vsyncx-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 0 0>; - nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ - nvidia,panel-timings = <0 0 200 0 0>; - }; -}; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts deleted file mode 100644 index c0e2e1e5fd..0000000000 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ /dev/null @@ -1,191 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Seaboard"; - compatible = "nvidia,seaboard", "nvidia,tegra20"; - - chosen { - bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; - }; - - aliases { - /* This defines the order of our ports */ - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; - }; - - memory { - device_type = "memory"; - reg = < 0x00000000 0x40000000 >; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - /* This is not used in U-Boot, but is expected to be in kernel .dts */ - i2c@7000d000 { - clock-frequency = <100000>; - pmic@34 { - compatible = "ti,tps6586x"; - reg = <0x34>; - - clk_32k: clock { - compatible = "fixed-clock"; - /* - * leave out for now due to CPP: - * #clock-cells = <0>; - */ - clock-frequency = <32768>; - }; - }; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - - i2c@7000c000 { - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - clock-frequency = <100000>; - }; - - kbc@7000e200 { - linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c - 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006 - 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020 - 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023 - 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a - 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031 - 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018 - 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032 - 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036 - 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019 - 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044 - 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067 - 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068 - 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057 - 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d - 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f - 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040 - 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f - 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050 - 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053 - 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072 - 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071 - 0x1f04008a>; - linux,fn-keymap = <0x05040002>; - }; - - emc@7000f400 { - emc-table@190000 { - reg = < 190000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 190000 >; - nvidia,emc-registers = < 0x0000000c 0x00000026 - 0x00000009 0x00000003 0x00000004 0x00000004 - 0x00000002 0x0000000c 0x00000003 0x00000003 - 0x00000002 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x0000059f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000003 0x00000001 0x0000000b 0x000000c8 - 0x00000003 0x00000007 0x00000004 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xa06204ae - 0x007dc010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - emc-table@380000 { - reg = < 380000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 380000 >; - nvidia,emc-registers = < 0x00000017 0x0000004b - 0x00000012 0x00000006 0x00000004 0x00000005 - 0x00000003 0x0000000c 0x00000006 0x00000006 - 0x00000003 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x00000b5f - 0x00000000 0x00000003 0x00000003 0x00000006 - 0x00000006 0x00000001 0x00000011 0x000000c8 - 0x00000003 0x0000000e 0x00000007 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xe044048b - 0x007d8010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - }; - - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ - dr_mode = "otg"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000400 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; - - lcd_panel: panel { - /* Seaboard has 1366x768 */ - clock = <70600000>; - xres = <1366>; - yres = <768>; - left-margin = <58>; - right-margin = <58>; - hsync-len = <58>; - lower-margin = <4>; - upper-margin = <4>; - vsync-len = <4>; - hsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 2 0>; - nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ - nvidia,panel-timings = <400 4 203 17 15>; - }; -}; diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts deleted file mode 100644 index 1a526bab64..0000000000 --- a/board/nvidia/dts/tegra20-ventana.dts +++ /dev/null @@ -1,91 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Ventana evaluation board"; - compatible = "nvidia,ventana", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; - }; - - memory { - reg = <0x00000000 0x40000000>; - }; - - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - status = "disabled"; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000400 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; - - lcd_panel: panel { - clock = <72072000>; - xres = <1366>; - yres = <768>; - left-margin = <58>; - right-margin = <58>; - hsync-len = <58>; - lower-margin = <4>; - upper-margin = <4>; - vsync-len = <4>; - hsync-active-high; - vsync-active-high; - nvidia,bits-per-pixel = <16>; - nvidia,pwm = <&pwm 2 0>; - nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ - nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ - nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ - nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ - nvidia,panel-timings = <0 0 200 0 0>; - }; -}; diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts deleted file mode 100644 index eb92264f9d..0000000000 --- a/board/nvidia/dts/tegra20-whistler.dts +++ /dev/null @@ -1,73 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "NVIDIA Tegra20 Whistler evaluation board"; - compatible = "nvidia,whistler", "nvidia,tegra20"; - - aliases { - i2c0 = "/i2c@7000d000"; - usb0 = "/usb@c5008000"; - sdhci0 = "/sdhci@c8000600"; - sdhci1 = "/sdhci@c8000400"; - }; - - memory { - device_type = "memory"; - reg = < 0x00000000 0x20000000 >; - }; - - serial@70006000 { - clock-frequency = < 216000000 >; - }; - - i2c@7000c000 { - status = "disabled"; - }; - - i2c@7000c400 { - status = "disabled"; - }; - - i2c@7000c500 { - status = "disabled"; - }; - - i2c@7000d000 { - clock-frequency = <100000>; - - pmic@3c { - compatible = "maxim,max8907b"; - reg = <0x3c>; - - clk_32k: clock { - compatible = "fixed-clock"; - /* - * leave out for now due to CPP: - * #clock-cells = <0>; - */ - clock-frequency = <32768>; - }; - }; - }; - - usb@c5000000 { - status = "disabled"; - }; - - usb@c5004000 { - status = "disabled"; - }; - - sdhci@c8000400 { - status = "okay"; - wp-gpios = <&gpio 173 0>; /* gpio PV5 */ - bus-width = <8>; - }; - - sdhci@c8000600 { - status = "okay"; - bus-width = <8>; - }; -}; diff --git a/board/nvidia/dts/tegra30-beaver.dts b/board/nvidia/dts/tegra30-beaver.dts deleted file mode 100644 index a7cc93e93f..0000000000 --- a/board/nvidia/dts/tegra30-beaver.dts +++ /dev/null @@ -1,77 +0,0 @@ -/dts-v1/; - -#include "tegra30.dtsi" - -/ { - model = "NVIDIA Beaver"; - compatible = "nvidia,beaver", "nvidia,tegra30"; - - aliases { - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x7ff00000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - spi-flash@1 { - compatible = "winbond,w25q32"; - reg = <1>; - spi-max-frequency = <20000000>; - }; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - usb@7d008000 { - nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ - status = "okay"; - }; -}; diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts deleted file mode 100644 index ea2cf76ff3..0000000000 --- a/board/nvidia/dts/tegra30-cardhu.dts +++ /dev/null @@ -1,72 +0,0 @@ -/dts-v1/; - -#include "tegra30.dtsi" - -/ { - model = "NVIDIA Cardhu"; - compatible = "nvidia,cardhu", "nvidia,tegra30"; - - aliases { - i2c0 = "/i2c@7000d000"; - i2c1 = "/i2c@7000c000"; - i2c2 = "/i2c@7000c400"; - i2c3 = "/i2c@7000c500"; - i2c4 = "/i2c@7000c700"; - sdhci0 = "/sdhci@78000600"; - sdhci1 = "/sdhci@78000000"; - usb0 = "/usb@7d008000"; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - }; - - spi@7000da00 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 1>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - usb@7d008000 { - nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */ - status = "okay"; - }; -}; diff --git a/board/nvidia/venice2/Makefile b/board/nvidia/venice2/Makefile new file mode 100644 index 0000000000..5fac5ab1f8 --- /dev/null +++ b/board/nvidia/venice2/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2013-2014 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += as3722_init.o +obj-y += venice2.o diff --git a/board/nvidia/venice2/as3722_init.c b/board/nvidia/venice2/as3722_init.c new file mode 100644 index 0000000000..960fea7ee7 --- /dev/null +++ b/board/nvidia/venice2/as3722_init.c @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch-tegra/tegra_i2c.h> +#include "as3722_init.h" + +/* AS3722-PMIC-specific early init code - get CPU rails up, etc */ + +void tegra_i2c_ll_write_addr(uint addr, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(addr, ®->cmd_addr0); + writel(config, ®->cnfg); +} + +void tegra_i2c_ll_write_data(uint data, uint config) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(data, ®->cmd_data1); + writel(config, ®->cnfg); +} + +void pmic_enable_cpu_vdd(void) +{ + debug("%s entry\n", __func__); + + /* Don't need to set up VDD_CORE - already done - by OTP */ + + debug("%s: Setting VDD_CPU to 1.0V via AS3722 reg 0/4D\n", __func__); + /* + * Bring up VDD_CPU via the AS3722 PMIC on the PWR I2C bus. + * First set VDD to 1.0V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_SD0VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled. + * tegra_i2c_ll_write_data(AS3722_SD0CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); + + debug("%s: Setting VDD_GPU to 1.0V via AS3722 reg 6/4D\n", __func__); + /* + * Bring up VDD_GPU via the AS3722 PMIC on the PWR I2C bus. + * First set VDD to 1.0V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_SD6VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled. + * tegra_i2c_ll_write_data(AS3722_SD6CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); + + debug("%s: Set VPP_FUSE to 1.2V via AS3722 reg 0x12/4E\n", __func__); + /* + * Bring up VPP_FUSE via the AS3722 PMIC on the PWR I2C bus. + * First set VDD to 1.2V, then enable the VDD regulator. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_LDO2VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled. + * tegra_i2c_ll_write_data(AS3722_LDO2CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); + + debug("%s: Set VDD_SDMMC to 3.3V via AS3722 reg 0x16/4E\n", __func__); + /* + * Bring up VDD_SDMMC via the AS3722 PMIC on the PWR I2C bus. + * First set it to bypass 3.3V straight thru, then enable the regulator + * + * NOTE: We do this early because doing it later seems to hose the CPU + * power rail/partition startup. Need to debug. + */ + tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2); + tegra_i2c_ll_write_data(AS3722_LDO6VOLTAGE_DATA, I2C_SEND_2_BYTES); + /* + * Don't write LDCONTROL - it's already 0xFF, i.e. all LDOs enabled. + * tegra_i2c_ll_write_data(AS3722_LDO6CONTROL_DATA, I2C_SEND_2_BYTES); + */ + udelay(10 * 1000); +} diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h new file mode 100644 index 0000000000..2a9e7cdf87 --- /dev/null +++ b/board/nvidia/venice2/as3722_init.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* AS3722-PMIC-specific early init regs */ + +#define AS3722_I2C_ADDR 0x80 + +#define AS3722_SD0VOLTAGE_REG 0x00 /* CPU */ +#define AS3722_SD1VOLTAGE_REG 0x01 /* CORE, already set by OTP */ +#define AS3722_SD6VOLTAGE_REG 0x06 /* GPU */ +#define AS3722_SDCONTROL_REG 0x4D + +#define AS3722_LDO2VOLTAGE_REG 0x12 /* VPP_FUSE */ +#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */ +#define AS3722_LDCONTROL_REG 0x4E + +#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG) +#define AS3722_SD0CONTROL_DATA (0x0100 | AS3722_SDCONTROL_REG) + +#define AS3722_SD1VOLTAGE_DATA (0x3200 | AS3722_SD1VOLTAGE_REG) +#define AS3722_SD1CONTROL_DATA (0x0200 | AS3722_SDCONTROL_REG) + +#define AS3722_SD6CONTROL_DATA (0x4000 | AS3722_SDCONTROL_REG) +#define AS3722_SD6VOLTAGE_DATA (0x2800 | AS3722_SD6VOLTAGE_REG) + +#define AS3722_LDO2CONTROL_DATA (0x0400 | AS3722_LDCONTROL_REG) +#define AS3722_LDO2VOLTAGE_DATA (0x1000 | AS3722_LDO2VOLTAGE_REG) + +#define AS3722_LDO6CONTROL_DATA (0x4000 | AS3722_LDCONTROL_REG) +#define AS3722_LDO6VOLTAGE_DATA (0x3F00 | AS3722_LDO6VOLTAGE_REG) + +#define I2C_SEND_2_BYTES 0x0A02 + +void pmic_enable_cpu_vdd(void); diff --git a/board/nvidia/venice2/pinmux-config-venice2.h b/board/nvidia/venice2/pinmux-config-venice2.h new file mode 100644 index 0000000000..50868e6488 --- /dev/null +++ b/board/nvidia/venice2/pinmux-config-venice2.h @@ -0,0 +1,339 @@ +/* + * (C) Copyright 2013 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PINMUX_CONFIG_VENICE2_H_ +#define _PINMUX_CONFIG_VENICE2_H_ + +#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_DEFAULT, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + } + +#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define USB_PINMUX CEC_PINMUX + +#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .padgrp = PDRIVE_PINGROUP_##_padgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PGRP_LPMD_##_lpmd, \ + .schmt = PGRP_SCHMT_##_schmt, \ + .hsm = PGRP_HSM_##_hsm, \ + } + +static struct pingroup_config tegra124_pinmux_common[] = { + /* EXTPERIPH1 pinmux */ + DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, OUTPUT), + + /* I2S0 pinmux */ + DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), + + /* I2S1 pinmux */ + DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), + + /* I2S3 pinmux */ + DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), + + /* CLDVFS pinmux */ + DEFAULT_PINMUX(DVFS_PWM, CLDVFS, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DVFS_CLK, CLDVFS, NORMAL, NORMAL, OUTPUT), + + /* ULPI pinmux */ + DEFAULT_PINMUX(ULPI_DATA0, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA1, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA2, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA3, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA4, ULPI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA5, ULPI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA6, ULPI, NORMAL, NORMAL, INPUT), + + /* EC KBC/SPI */ + DEFAULT_PINMUX(ULPI_CLK, SPI1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DIR, SPI1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_NXT, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_STP, SPI1, NORMAL, NORMAL, INPUT), + + /* I2C3 (TPM) pinmux */ + I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* I2C2 pinmux */ + I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* UARTD pinmux (UART4 on Servo board, unused) */ + DEFAULT_PINMUX(GPIO_PJ7, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PB0, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PB1, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PK7, UARTD, NORMAL, NORMAL, OUTPUT), + + /* SPI4 (Winbond 'boot ROM') */ + DEFAULT_PINMUX(GPIO_PG5, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG6, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG7, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PI3, SPI4, NORMAL, NORMAL, INPUT), + + /* Touch IRQ */ + DEFAULT_PINMUX(GPIO_W3_AUD, RSVD1, NORMAL, NORMAL, INPUT), + + /* PWM1 pinmux */ + DEFAULT_PINMUX(GPIO_PH1, PWM1, NORMAL, NORMAL, OUTPUT), + + /* SDMMC1 pinmux */ + DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), + + /* SDMMC3 pinmux */ + DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, UP, TRISTATE, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, DOWN, NORMAL, INPUT), + + /* SDMMC4 pinmux */ + DEFAULT_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT), + + /* BLINK pinmux */ + DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), + + /* KBC pinmux */ + DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), + + /* Misc */ + DEFAULT_PINMUX(GPIO_PV0, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(KB_ROW7, RSVD1, UP, NORMAL, INPUT), + + /* UARTA pinmux (BR_UART_TXD/RXD on Servo board) */ + DEFAULT_PINMUX(KB_ROW9, UARTA, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_ROW10, UARTA, UP, TRISTATE, INPUT), + + /* I2CPWR pinmux (I2C5) */ + I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* RTCK pinmux */ + DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT), + + /* CLK pinmux */ + DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT), + + /* PWRON pinmux */ + DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT), + + /* CPU pinmux */ + DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT), + + /* PMI pinmux */ + DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT), + + /* RESET_OUT_N pinmux */ + DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT), + + /* EXTPERIPH3 pinmux */ + DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), + + /* I2C1 pinmux */ + I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* UARTB, GPS */ + DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), + + /* UARTC (WIFI/BT) */ + DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), + + /* CEC pinmux */ + CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* I2C4 (HDMI_DDC) pinmux */ + DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + + /* USB pinmux */ + USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE), + USB_PINMUX(USB_VBUS_EN1, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE), + + /* Unused, marked SNN_ on schematic, TRISTATE 'em */ + DEFAULT_PINMUX(GPIO_PBB0, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB3, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB4, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB5, RSVD2, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB6, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PBB7, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PCC2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PH3, GMI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PI7, GMI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PJ2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_X5_AUD, RSVD3, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_X6_AUD, GMI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GPIO_PFF2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(USB_VBUS_EN2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_COL5, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW2, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW3, KBC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW5, RSVD2, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW6, KBC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW13, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW14, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW16, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(OWR, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(ULPI_DATA7, ULPI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP3_DIN, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP3_FS, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP3_SCLK, RSVD2, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(CLK2_OUT, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(SDMMC1_WP_N, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(CAM_MCLK, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(CLK3_REQ, RSVD1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(SPDIF_OUT, RSVD1, NORMAL, TRISTATE, INPUT), +}; + +static struct pingroup_config unused_pins_lowpower[] = { + DEFAULT_PINMUX(CLK1_REQ, RSVD3, DOWN, TRISTATE, OUTPUT), +}; + +/* Initially setting all used GPIO's to non-TRISTATE */ +static struct pingroup_config tegra124_pinmux_set_nontristate[] = { + DEFAULT_PINMUX(GPIO_X4_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_X7_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X3_AUD, RSVD3, UP, NORMAL, INPUT), + + /* EN_VDD_BL */ + DEFAULT_PINMUX(DAP3_DOUT, I2S2, DOWN, NORMAL, OUTPUT), + + /* MODEM */ + DEFAULT_PINMUX(GPIO_PV0, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT), + + /* BOOT_SEL0-3 */ + DEFAULT_PINMUX(GPIO_PG0, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG1, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG2, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PG3, GMI, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(CLK2_REQ, RSVD3, NORMAL, NORMAL, OUTPUT), + + DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL4, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_ROW4, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(GPIO_PU4, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU5, RSVD3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU6, RSVD3, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(HDMI_INT, RSVD1, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(SPDIF_IN, USB, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), + + /* TS_SHDN_L */ + DEFAULT_PINMUX(GPIO_PK1, GMI, NORMAL, NORMAL, OUTPUT), +}; + +static struct padctrl_config venice2_padctrl[] = { + /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */ + DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, + SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, NONE, NONE), +}; +#endif /* PINMUX_CONFIG_VENICE2_H */ diff --git a/board/nvidia/venice2/venice2.c b/board/nvidia/venice2/venice2.c new file mode 100644 index 0000000000..1ed2fd788e --- /dev/null +++ b/board/nvidia/venice2/venice2.c @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2013-2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm-generic/gpio.h> +#include <asm/arch/gpio.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pinmux.h> +#include "pinmux-config-venice2.h" +#include <i2c.h> + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_config_table(tegra124_pinmux_set_nontristate, + ARRAY_SIZE(tegra124_pinmux_set_nontristate)); + + pinmux_config_table(tegra124_pinmux_common, + ARRAY_SIZE(tegra124_pinmux_common)); + + pinmux_config_table(unused_pins_lowpower, + ARRAY_SIZE(unused_pins_lowpower)); + + /* Initialize any non-default pad configs (APB_MISC_GP regs) */ + padgrp_config_table(venice2_padctrl, ARRAY_SIZE(venice2_padctrl)); +} diff --git a/board/pcs440ep/config.mk b/board/pcs440ep/config.mk index 1e761284e4..b90d5d0ec1 100644 --- a/board/pcs440ep/config.mk +++ b/board/pcs440ep/config.mk @@ -10,7 +10,7 @@ # # Check the U-Boot Image with a SHA1 checksum -ALL-y += $(obj)u-boot.sha1 +ALL-y += u-boot.sha1 PLATFORM_CPPFLAGS += -DCONFIG_440=1 diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 7e5e07ff23..1071662ea9 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -176,13 +176,13 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 0, .phy_if = PHY_INTERFACE_MODE_RGMII, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_id = 1, + .phy_addr = 1, .phy_if = PHY_INTERFACE_MODE_RGMII, }, }; diff --git a/board/pr1/config.mk b/board/pr1/config.mk index 5c18d5c9e4..2436ec07f4 100644 --- a/board/pr1/config.mk +++ b/board/pr1/config.mk @@ -9,6 +9,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index 22bd6b197e..7d2bb8c4a2 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o obj-$(CONFIG_THOR_FUNCTION) += thor.o obj-$(CONFIG_CMD_USB_MASS_STORAGE) += ums.o +obj-$(CONFIG_MISC_COMMON) += misc.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_BOARD_COMMON) += board.o diff --git a/board/samsung/common/dfu_sample_env.txt b/board/samsung/common/dfu_sample_env.txt new file mode 100644 index 0000000000..d6ee8a228a --- /dev/null +++ b/board/samsung/common/dfu_sample_env.txt @@ -0,0 +1,9 @@ +mmcboot=setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} ${rootfstype} rootwait ${console}; run loaduimage; bootm 0x40007FC0 +rootfstype=ext4 +loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage +mmcdev=0 +mmcbootpart=2 +mmcrootpart=5 +console=console=ttySAC2,115200n8 +bootcmd=run mmcboot +dfu_alt_info=u-boot mmc 80 800;params.bin mmc 0x38 0x8;uImage ext4 0 2 diff --git a/board/samsung/common/exynos-uboot-spl.lds b/board/samsung/common/exynos-uboot-spl.lds index 8e3b73ecf7..b22f9e07bb 100644 --- a/board/samsung/common/exynos-uboot-spl.lds +++ b/board/samsung/common/exynos-uboot-spl.lds @@ -42,7 +42,11 @@ SECTIONS . = ALIGN(4); __image_copy_end = .; - _end = .; + + .end : + { + *(.__end) + } >.sram .bss : { diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c new file mode 100644 index 0000000000..eb157394ad --- /dev/null +++ b/board/samsung/common/misc.c @@ -0,0 +1,411 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <lcd.h> +#include <libtizen.h> +#include <samsung/misc.h> +#include <errno.h> +#include <version.h> +#include <asm/sizes.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/gpio.h> +#include <linux/input.h> +#include <power/pmic.h> +#include <mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +void set_board_info(void) +{ + char info[64]; + + snprintf(info, ARRAY_SIZE(info), "%d.%d", s5p_cpu_rev & 0x0f, + (s5p_cpu_rev & 0xf0) >> 0x04); + setenv("soc_rev", info); + + snprintf(info, ARRAY_SIZE(info), "%x", s5p_cpu_id); + setenv("soc_id", info); + +#ifdef CONFIG_REVISION_TAG + snprintf(info, ARRAY_SIZE(info), "%x", get_board_rev()); + setenv("board_rev", info); +#endif +#ifdef CONFIG_OF_LIBFDT + snprintf(info, ARRAY_SIZE(info), "%s%x-%s.dtb", + CONFIG_SYS_SOC, s5p_cpu_id, CONFIG_SYS_BOARD); + setenv("fdtfile", info); +#endif +} +#endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */ + +#ifdef CONFIG_LCD_MENU +static int power_key_pressed(u32 reg) +{ + struct pmic *pmic; + u32 status; + u32 mask; + + pmic = pmic_get(KEY_PWR_PMIC_NAME); + if (!pmic) { + printf("%s: Not found\n", KEY_PWR_PMIC_NAME); + return 0; + } + + if (pmic_probe(pmic)) + return 0; + + if (reg == KEY_PWR_STATUS_REG) + mask = KEY_PWR_STATUS_MASK; + else + mask = KEY_PWR_INTERRUPT_MASK; + + if (pmic_reg_read(pmic, reg, &status)) + return 0; + + return !!(status & mask); +} + +static int key_pressed(int key) +{ + int value; + + switch (key) { + case KEY_POWER: + value = power_key_pressed(KEY_PWR_INTERRUPT_REG); + break; + case KEY_VOLUMEUP: + value = !gpio_get_value(KEY_VOL_UP_GPIO); + break; + case KEY_VOLUMEDOWN: + value = !gpio_get_value(KEY_VOL_DOWN_GPIO); + break; + default: + value = 0; + break; + } + + return value; +} + +static int check_keys(void) +{ + int keys = 0; + + if (key_pressed(KEY_POWER)) + keys += KEY_POWER; + if (key_pressed(KEY_VOLUMEUP)) + keys += KEY_VOLUMEUP; + if (key_pressed(KEY_VOLUMEDOWN)) + keys += KEY_VOLUMEDOWN; + + return keys; +} + +/* + * 0 BOOT_MODE_INFO + * 1 BOOT_MODE_THOR + * 2 BOOT_MODE_UMS + * 3 BOOT_MODE_DFU + * 4 BOOT_MODE_EXIT + */ +static char * +mode_name[BOOT_MODE_EXIT + 1] = { + "DEVICE", + "THOR", + "UMS", + "DFU", + "EXIT" +}; + +static char * +mode_info[BOOT_MODE_EXIT + 1] = { + "info", + "downloader", + "mass storage", + "firmware update", + "and run normal boot" +}; + +#define MODE_CMD_ARGC 4 + +static char * +mode_cmd[BOOT_MODE_EXIT + 1][MODE_CMD_ARGC] = { + {"", "", "", ""}, + {"thor", "0", "mmc", "0"}, + {"ums", "0", "mmc", "0"}, + {"dfu", "0", "mmc", "0"}, + {"", "", "", ""}, +}; + +static void display_board_info(void) +{ +#ifdef CONFIG_GENERIC_MMC + struct mmc *mmc = find_mmc_device(0); +#endif + vidinfo_t *vid = &panel_info; + + lcd_position_cursor(4, 4); + + lcd_printf("%s\n\t", U_BOOT_VERSION); + lcd_puts("\n\t\tBoard Info:\n"); +#ifdef CONFIG_SYS_BOARD + lcd_printf("\tBoard name: %s\n", CONFIG_SYS_BOARD); +#endif +#ifdef CONFIG_REVISION_TAG + lcd_printf("\tBoard rev: %u\n", get_board_rev()); +#endif + lcd_printf("\tDRAM banks: %u\n", CONFIG_NR_DRAM_BANKS); + lcd_printf("\tDRAM size: %u MB\n", gd->ram_size / SZ_1M); + +#ifdef CONFIG_GENERIC_MMC + if (mmc) { + if (!mmc->capacity) + mmc_init(mmc); + + lcd_printf("\teMMC size: %llu MB\n", mmc->capacity / SZ_1M); + } +#endif + if (vid) + lcd_printf("\tDisplay resolution: %u x % u\n", + vid->vl_col, vid->vl_row); + + lcd_printf("\tDisplay BPP: %u\n", 1 << vid->vl_bpix); +} + +static int mode_leave_menu(int mode) +{ + char *exit_option; + char *exit_boot = "boot"; + char *exit_back = "back"; + cmd_tbl_t *cmd; + int cmd_result; + int cmd_repeatable; + int leave; + + lcd_clear(); + + switch (mode) { + case BOOT_MODE_EXIT: + return 1; + case BOOT_MODE_INFO: + display_board_info(); + exit_option = exit_back; + leave = 0; + break; + default: + cmd = find_cmd(mode_cmd[mode][0]); + if (cmd) { + printf("Enter: %s %s\n", mode_name[mode], + mode_info[mode]); + lcd_printf("\n\n\t%s %s\n", mode_name[mode], + mode_info[mode]); + lcd_puts("\n\tDo not turn off device before finish!\n"); + + cmd_result = cmd_process(0, MODE_CMD_ARGC, + *(mode_cmd + mode), + &cmd_repeatable, NULL); + + if (cmd_result == CMD_RET_SUCCESS) { + printf("Command finished\n"); + lcd_clear(); + lcd_printf("\n\n\t%s finished\n", + mode_name[mode]); + + exit_option = exit_boot; + leave = 1; + } else { + printf("Command error\n"); + lcd_clear(); + lcd_printf("\n\n\t%s command error\n", + mode_name[mode]); + + exit_option = exit_back; + leave = 0; + } + } else { + lcd_puts("\n\n\tThis mode is not supported.\n"); + exit_option = exit_back; + leave = 0; + } + } + + lcd_printf("\n\n\tPress POWER KEY to %s\n", exit_option); + + /* Clear PWR button Rising edge interrupt status flag */ + power_key_pressed(KEY_PWR_INTERRUPT_REG); + + /* Wait for PWR key */ + while (!key_pressed(KEY_POWER)) + mdelay(1); + + lcd_clear(); + return leave; +} + +static void display_download_menu(int mode) +{ + char *selection[BOOT_MODE_EXIT + 1]; + int i; + + for (i = 0; i <= BOOT_MODE_EXIT; i++) + selection[i] = "[ ]"; + + selection[mode] = "[=>]"; + + lcd_clear(); + lcd_printf("\n\t\tDownload Mode Menu\n"); + + for (i = 0; i <= BOOT_MODE_EXIT; i++) + lcd_printf("\t%s %s - %s\n\n", selection[i], + mode_name[i], + mode_info[i]); +} + +static void download_menu(void) +{ + int mode = 0; + int last_mode = 0; + int run; + int key; + + display_download_menu(mode); + + while (1) { + run = 0; + + if (mode != last_mode) + display_download_menu(mode); + + last_mode = mode; + mdelay(100); + + key = check_keys(); + switch (key) { + case KEY_POWER: + run = 1; + break; + case KEY_VOLUMEUP: + if (mode > 0) + mode--; + break; + case KEY_VOLUMEDOWN: + if (mode < BOOT_MODE_EXIT) + mode++; + break; + default: + break; + } + + if (run) { + if (mode_leave_menu(mode)) + break; + + display_download_menu(mode); + } + } + + lcd_clear(); +} + +static void display_mode_info(void) +{ + lcd_position_cursor(4, 4); + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_puts("\nDownload Mode Menu\n"); +#ifdef CONFIG_SYS_BOARD + lcd_printf("Board name: %s\n", CONFIG_SYS_BOARD); +#endif + lcd_printf("Press POWER KEY to display MENU options."); +} + +static int boot_menu(void) +{ + int key = 0; + int timeout = 10; + + display_mode_info(); + + while (timeout--) { + lcd_printf("\rNormal boot will start in: %d seconds.", timeout); + mdelay(1000); + + key = key_pressed(KEY_POWER); + if (key) + break; + } + + lcd_clear(); + + /* If PWR pressed - show download menu */ + if (key) { + printf("Power pressed - go to download menu\n"); + download_menu(); + printf("Download mode exit.\n"); + } + + return 0; +} + +void check_boot_mode(void) +{ + int pwr_key; + + pwr_key = power_key_pressed(KEY_PWR_STATUS_REG); + if (!pwr_key) + return; + + /* Clear PWR button Rising edge interrupt status flag */ + power_key_pressed(KEY_PWR_INTERRUPT_REG); + + if (key_pressed(KEY_VOLUMEUP)) + boot_menu(); + else if (key_pressed(KEY_VOLUMEDOWN)) + mode_leave_menu(BOOT_MODE_THOR); +} + +void keys_init(void) +{ + /* Set direction to input */ + gpio_direction_input(KEY_VOL_UP_GPIO); + gpio_direction_input(KEY_VOL_DOWN_GPIO); +} +#endif /* CONFIG_LCD_MENU */ + +#ifdef CONFIG_CMD_BMP +void draw_logo(void) +{ + int x, y; + ulong addr; + + addr = panel_info.logo_addr; + if (!addr) { + error("There is no logo data."); + return; + } + + if (panel_info.vl_width >= panel_info.logo_width) { + x = ((panel_info.vl_width - panel_info.logo_width) >> 1); + x += panel_info.logo_x_offset; /* For X center align */ + } else { + x = 0; + printf("Warning: image width is bigger than display width\n"); + } + + if (panel_info.vl_height >= panel_info.logo_height) { + y = ((panel_info.vl_height - panel_info.logo_height) >> 1); + y += panel_info.logo_y_offset; /* For Y center align */ + } else { + y = 0; + printf("Warning: image height is bigger than display height\n"); + } + + bmp_display(addr, x, y); +} +#endif /* CONFIG_CMD_BMP */ diff --git a/board/samsung/dts/exynos5250-arndale.dts b/board/samsung/dts/exynos5250-arndale.dts deleted file mode 100644 index 202f2ea6ed..0000000000 --- a/board/samsung/dts/exynos5250-arndale.dts +++ /dev/null @@ -1,39 +0,0 @@ -/* - * SAMSUNG Arndale board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -/dts-v1/; -#include "exynos5250.dtsi" - -/ { - model = "SAMSUNG Arndale board based on EXYNOS5250"; - compatible = "samsung,arndale", "samsung,exynos5250"; - - aliases { - serial0 = "/serial@12C20000"; - console = "/serial@12C20000"; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - }; - - mmc@12230000 { - status = "disabled"; - }; -}; diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts deleted file mode 100644 index c4ed3467cb..0000000000 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ /dev/null @@ -1,151 +0,0 @@ -/* - * SAMSUNG SMDK5250 board device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/dts-v1/; -/include/ "exynos5250.dtsi" - -/ { - model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; - compatible = "samsung,smdk5250", "samsung,exynos5250"; - - aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; - spi0 = "/spi@12d20000"; - spi1 = "/spi@12d30000"; - spi2 = "/spi@12d40000"; - spi3 = "/spi@131a0000"; - spi4 = "/spi@131b0000"; - mmc0 = "/mmc@12200000"; - mmc1 = "/mmc@12210000"; - mmc2 = "/mmc@12220000"; - mmc3 = "/mmc@12230000"; - serial0 = "/serial@12C30000"; - console = "/serial@12C30000"; - i2s = "/sound@3830000"; - }; - - sromc@12250000 { - bank = <1>; - srom-timing = <1 9 12 1 6 1 1>; - width = <2>; - lan@5000000 { - compatible = "smsc,lan9215", "smsc,lan"; - reg = <0x5000000 0x100>; - phy-mode = "mii"; - }; - }; - - sound@3830000 { - samsung,codec-type = "wm8994"; - }; - - sound@12d60000 { - status = "disabled"; - }; - - i2c@12c70000 { - soundcodec@1a { - reg = <0x1a>; - compatible = "wolfson,wm8994-codec"; - }; - }; - - i2c@12c60000 { - pmic@9 { - reg = <0x9>; - compatible = "maxim,max77686_pmic"; - }; - }; - - tmu@10060000 { - samsung,min-temp = <25>; - samsung,max-temp = <125>; - samsung,start-warning = <95>; - samsung,start-tripping = <105>; - samsung,hw-tripping = <110>; - samsung,efuse-min-value = <40>; - samsung,efuse-value = <55>; - samsung,efuse-max-value = <100>; - samsung,slope = <274761730>; - samsung,dc-value = <25>; - }; - - fimd@14400000 { - samsung,vl-freq = <60>; - samsung,vl-col = <2560>; - samsung,vl-row = <1600>; - samsung,vl-width = <2560>; - samsung,vl-height = <1600>; - - samsung,vl-clkp; - samsung,vl-dp; - samsung,vl-bpix = <4>; - - samsung,vl-hspw = <32>; - samsung,vl-hbpd = <80>; - samsung,vl-hfpd = <48>; - samsung,vl-vspw = <6>; - samsung,vl-vbpd = <37>; - samsung,vl-vfpd = <3>; - samsung,vl-cmd-allow-len = <0xf>; - - samsung,winid = <3>; - samsung,interface-mode = <1>; - samsung,dp-enabled = <1>; - samsung,dual-lcd-enabled = <0>; - }; - - dp@145b0000 { - samsung,lt-status = <0>; - - samsung,master-mode = <0>; - samsung,bist-mode = <0>; - samsung,bist-pattern = <0>; - samsung,h-sync-polarity = <0>; - samsung,v-sync-polarity = <0>; - samsung,interlaced = <0>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <0>; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - samsung,removable = <1>; - }; - - mmc@12230000 { - status = "disabled"; - }; - - ehci@12110000 { - samsung,vbus-gpio = <&gpio 0xbe 0>; /* X26 */ - }; -}; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts deleted file mode 100644 index 091cdb9e86..0000000000 --- a/board/samsung/dts/exynos5250-snow.dts +++ /dev/null @@ -1,187 +0,0 @@ -/* - * SAMSUNG Snow board device tree source - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/dts-v1/; -/include/ "exynos5250.dtsi" - -/ { - model = "Google Snow"; - compatible = "google,snow", "samsung,exynos5250"; - - aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; - spi0 = "/spi@12d20000"; - spi1 = "/spi@12d30000"; - spi2 = "/spi@12d40000"; - spi3 = "/spi@131a0000"; - spi4 = "/spi@131b0000"; - mmc0 = "/mmc@12200000"; - mmc1 = "/mmc@12210000"; - mmc2 = "/mmc@12220000"; - mmc3 = "/mmc@12230000"; - serial0 = "/serial@12C30000"; - console = "/serial@12C30000"; - i2s = "/sound@3830000"; - }; - - i2c4: i2c@12ca0000 { - cros-ec@1e { - reg = <0x1e>; - compatible = "google,cros-ec"; - i2c-max-frequency = <100000>; - ec-interrupt = <&gpio 782 1>; - }; - - power-regulator@48 { - compatible = "ti,tps65090"; - reg = <0x48>; - }; - }; - - spi@131b0000 { - spi-max-frequency = <1000000>; - spi-deactivate-delay = <100>; - cros-ec@0 { - reg = <0>; - compatible = "google,cros-ec"; - spi-max-frequency = <5000000>; - ec-interrupt = <&gpio 782 1>; - optimise-flash-write; - status = "disabled"; - }; - }; - - sound@3830000 { - samsung,codec-type = "max98095"; - codec-enable-gpio = <&gpio 0xb7 0>; - }; - - sound@12d60000 { - status = "disabled"; - }; - - i2c@12cd0000 { - soundcodec@22 { - reg = <0x22>; - compatible = "maxim,max98095-codec"; - }; - }; - - i2c@12c60000 { - pmic@9 { - reg = <0x9>; - compatible = "maxim,max77686_pmic"; - }; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <0>; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - samsung,removable = <1>; - }; - - mmc@12230000 { - status = "disabled"; - }; - - ehci@12110000 { - samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ - }; - - xhci@12000000 { - samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ - }; - - tmu@10060000 { - samsung,min-temp = <25>; - samsung,max-temp = <125>; - samsung,start-warning = <95>; - samsung,start-tripping = <105>; - samsung,hw-tripping = <110>; - samsung,efuse-min-value = <40>; - samsung,efuse-value = <55>; - samsung,efuse-max-value = <100>; - samsung,slope = <274761730>; - samsung,dc-value = <25>; - }; - - cros-ec-keyb { - compatible = "google,cros-ec-keyb"; - google,key-rows = <8>; - google,key-columns = <13>; - google,repeat-delay-ms = <240>; - google,repeat-rate-ms = <30>; - google,ghost-filter; - /* - * Keymap entries take the form of 0xRRCCKKKK where - * RR=Row CC=Column KKKK=Key Code - * The values below are for a US keyboard layout and - * are taken from the Linux driver. Note that the - * 102ND key is not used for US keyboards. - */ - linux,keymap = < - /* CAPSLCK F1 B F10 */ - 0x0001003a 0x0002003b 0x00030030 0x00040044 - /* N = R_ALT ESC */ - 0x00060031 0x0008000d 0x000a0064 0x01010001 - /* F4 G F7 H */ - 0x0102003e 0x01030022 0x01040041 0x01060023 - /* ' F9 BKSPACE L_CTRL */ - 0x01080028 0x01090043 0x010b000e 0x0200001d - /* TAB F3 T F6 */ - 0x0201000f 0x0202003d 0x02030014 0x02040040 - /* ] Y 102ND [ */ - 0x0205001b 0x02060015 0x02070056 0x0208001a - /* F8 GRAVE F2 5 */ - 0x02090042 0x03010029 0x0302003c 0x03030006 - /* F5 6 - \ */ - 0x0304003f 0x03060007 0x0308000c 0x030b002b - /* R_CTRL A D F */ - 0x04000061 0x0401001e 0x04020020 0x04030021 - /* S K J ; */ - 0x0404001f 0x04050025 0x04060024 0x04080027 - /* L ENTER Z C */ - 0x04090026 0x040b001c 0x0501002c 0x0502002e - /* V X , M */ - 0x0503002f 0x0504002d 0x05050033 0x05060032 - /* L_SHIFT / . SPACE */ - 0x0507002a 0x05080035 0x05090034 0x050B0039 - /* 1 3 4 2 */ - 0x06010002 0x06020004 0x06030005 0x06040003 - /* 8 7 0 9 */ - 0x06050009 0x06060008 0x0608000b 0x0609000a - /* L_ALT DOWN RIGHT Q */ - 0x060a0038 0x060b006c 0x060c006a 0x07010010 - /* E R W I */ - 0x07020012 0x07030013 0x07040011 0x07050017 - /* U R_SHIFT P O */ - 0x07060016 0x07070036 0x07080019 0x07090018 - /* UP LEFT */ - 0x070b0067 0x070c0069>; - }; -}; diff --git a/board/samsung/dts/exynos5420-smdk5420.dts b/board/samsung/dts/exynos5420-smdk5420.dts deleted file mode 100644 index d73976356d..0000000000 --- a/board/samsung/dts/exynos5420-smdk5420.dts +++ /dev/null @@ -1,169 +0,0 @@ -/* - * SAMSUNG SMDK5420 board device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/dts-v1/; -/include/ "exynos5420.dtsi" - -/ { - model = "SAMSUNG SMDK5420 board based on EXYNOS5420"; - compatible = "samsung,smdk5420", "samsung,exynos5"; - - config { - hwid = "smdk5420 TEST A-A 9382"; - }; - - aliases { - i2c0 = "/i2c@12c60000"; - i2c1 = "/i2c@12c70000"; - i2c2 = "/i2c@12c80000"; - i2c3 = "/i2c@12c90000"; - i2c4 = "/i2c@12ca0000"; - i2c5 = "/i2c@12cb0000"; - i2c6 = "/i2c@12cc0000"; - i2c7 = "/i2c@12cd0000"; - i2c8 = "/i2c@12e00000"; - i2c9 = "/i2c@12e10000"; - i2c10 = "/i2c@12e20000"; - spi0 = "/spi@12d20000"; - spi1 = "/spi@12d30000"; - spi2 = "/spi@12d40000"; - spi3 = "/spi@131a0000"; - spi4 = "/spi@131b0000"; - mmc0 = "/mmc@12200000"; - mmc1 = "/mmc@12210000"; - mmc2 = "/mmc@12220000"; - xhci0 = "/xhci@12000000"; - xhci1 = "/xhci@12400000"; - serial0 = "/serial@12C30000"; - console = "/serial@12C30000"; - }; - - tmu@10060000 { - samsung,min-temp = <25>; - samsung,max-temp = <125>; - samsung,start-warning = <95>; - samsung,start-tripping = <105>; - samsung,hw-tripping = <110>; - samsung,efuse-min-value = <40>; - samsung,efuse-value = <55>; - samsung,efuse-max-value = <100>; - samsung,slope = <274761730>; - samsung,dc-value = <25>; - }; - - /* s2mps11 is on i2c bus 4 */ - i2c@12ca0000 { - #address-cells = <1>; - #size-cells = <0>; - pmic@66 { - reg = <0x66>; - compatible = "samsung,s2mps11-pmic"; - }; - }; - - spi@12d20000 { /* spi0 */ - spi-max-frequency = <50000000>; - firmware_storage_spi: flash@0 { - reg = <0>; - }; - }; - - fimd@14400000 { - samsung,vl-freq = <60>; - samsung,vl-col = <2560>; - samsung,vl-row = <1600>; - samsung,vl-width = <2560>; - samsung,vl-height = <1600>; - - samsung,vl-clkp; - samsung,vl-dp; - samsung,vl-bpix = <4>; - - samsung,vl-hspw = <32>; - samsung,vl-hbpd = <80>; - samsung,vl-hfpd = <48>; - samsung,vl-vspw = <6>; - samsung,vl-vbpd = <37>; - samsung,vl-vfpd = <3>; - samsung,vl-cmd-allow-len = <0xf>; - - samsung,winid = <3>; - samsung,interface-mode = <1>; - samsung,dp-enabled = <1>; - samsung,dual-lcd-enabled = <0>; - }; - - sound@3830000 { - samsung,codec-type = "wm8994"; - }; - - i2c@12c70000 { - soundcodec@1a { - reg = <0x1a>; - compatible = "wolfson,wm8994-codec"; - }; - }; - - mmc@12200000 { - samsung,bus-width = <8>; - samsung,timing = <1 3 3>; - samsung,removable = <0>; - samsung,pre-init; - }; - - mmc@12210000 { - status = "disabled"; - }; - - mmc@12220000 { - samsung,bus-width = <4>; - samsung,timing = <1 2 3>; - samsung,removable = <1>; - }; - - mmc@12230000 { - status = "disabled"; - }; - - fimd@14400000 { - /* sysmmu is not used in U-Boot */ - samsung,disable-sysmmu; - }; - - dp@145b0000 { - samsung,lt-status = <0>; - - samsung,master-mode = <0>; - samsung,bist-mode = <0>; - samsung,bist-pattern = <0>; - samsung,h-sync-polarity = <0>; - samsung,v-sync-polarity = <0>; - samsung,interlaced = <0>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - }; - - dmc { - mem-type = "ddr3"; - }; - - xhci1: xhci@12400000 { - compatible = "samsung,exynos5250-xhci"; - reg = <0x12400000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - - phy { - compatible = "samsung,exynos5250-usb3-phy"; - reg = <0x12500000 0x100>; - }; - }; -}; diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index 366f648d32..61b9ece038 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -13,10 +13,17 @@ #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> +#include <samsung/misc.h> + DECLARE_GLOBAL_DATA_PTR; static struct s5pc110_gpio *s5pc110_gpio; +u32 get_board_rev(void) +{ + return 0; +} + int board_init(void) { /* Set Initial global variables */ @@ -173,3 +180,13 @@ struct s3c_plat_otg_data s5pc110_otg_data = { .usb_phy_ctrl = S5PC110_USB_PHY_CONTROL, }; #endif + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif + return 0; +} +#endif diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S index 726211a336..d52bc09f8d 100644 --- a/board/samsung/goni/lowlevel_init.S +++ b/board/samsung/goni/lowlevel_init.S @@ -22,9 +22,6 @@ * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on */ -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: mov r11, lr diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index e8818bf9b1..1add9fe626 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -4,16 +4,19 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD -obj-y += origen.o -endif - ifdef CONFIG_SPL_BUILD -all: $(OBJTREE)/tools/mk$(BOARD)spl -endif +# necessary to create built-in.o +obj- := __dummy__.o -# Fix ME after we implement hostprogs-y. -ifdef CONFIG_SPL_BUILD -$(OBJTREE)/tools/mk$(BOARD)spl: tools/mkv310_image.c - $(HOSTCC) tools/mkv310_image.c -o $(OBJTREE)/tools/mk$(BOARD)spl +hostprogs-y := tools/mkorigenspl +always := $(hostprogs-y) + +# omit -O2 option to suppress +# warning: dereferencing type-punned pointer will break strict-aliasing rules +# +# TODO: +# Fix the root cause in tools/mkorigenspl.c and delete the following work-around +$(obj)/tools/mkorigenspl: HOSTCFLAGS:=$(filter-out -O2,$(HOSTCFLAGS)) +else +obj-y += origen.o endif diff --git a/board/samsung/origen/tools/mkv310_image.c b/board/samsung/origen/tools/mkorigenspl.c index 3ed20efce3..3ed20efce3 100644 --- a/board/samsung/origen/tools/mkv310_image.c +++ b/board/samsung/origen/tools/mkorigenspl.c diff --git a/board/samsung/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S index c7b78fd103..5de04f10e9 100644 --- a/board/samsung/smdk2410/lowlevel_init.S +++ b/board/samsung/smdk2410/lowlevel_init.S @@ -110,16 +110,13 @@ #define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ /**************************************/ -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ ldr r0, =SMRDATA - ldr r1, _TEXT_BASE + ldr r1, =CONFIG_SYS_TEXT_BASE sub r0, r0, r1 ldr r1, =BWSCON /* Bus Width Status Controller */ add r2, r0, #13*4 diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S deleted file mode 100644 index 9003e2d007..0000000000 --- a/board/samsung/smdk5250/lowlevel_init.S +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Lowlevel setup for SMDK5250 board based on S5PC520 - * - * Copyright (C) 2012 Samsung Electronics - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - - /* use iRAM stack in bl2 */ - ldr sp, =CONFIG_IRAM_STACK - stmdb r13!, {ip,lr} - - /* check reset status */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in RAM, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_init - -1: - bl arch_cpu_init - bl tzpc_init - ldmia r13!, {ip,pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS5_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos5_cpu_resume function*/ - ldr r1, [r0] - - /* Jump to kernel */ - mov pc, r1 - nop - nop diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index 943c29a698..a69f73d5e8 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -26,22 +26,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_USB_EHCI_EXYNOS -static int board_usb_vbus_init(void) -{ - struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *) - samsung_get_base_gpio_part1(); - - /* Enable VBUS power switch */ - s5p_gpio_direction_output(&gpio1->x2, 6, 1); - - /* VBUS turn ON time */ - mdelay(3); - - return 0; -} -#endif - #ifdef CONFIG_SOUND_MAX98095 static void board_enable_audio_codec(void) { @@ -56,9 +40,6 @@ static void board_enable_audio_codec(void) int exynos_init(void) { -#ifdef CONFIG_USB_EHCI_EXYNOS - board_usb_vbus_init(); -#endif #ifdef CONFIG_SOUND_MAX98095 board_enable_audio_codec(); #endif diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S index 4df0974af5..65e6b7a73a 100644 --- a/board/samsung/smdkc100/lowlevel_init.S +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -17,9 +17,6 @@ * r5 has zero always */ -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - .globl lowlevel_init lowlevel_init: mov r9, lr diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile index dbc621bd61..de0da167be 100644 --- a/board/samsung/smdkv310/Makefile +++ b/board/samsung/smdkv310/Makefile @@ -4,16 +4,12 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD -obj-y += smdkv310.o -endif - ifdef CONFIG_SPL_BUILD -all: $(OBJTREE)/tools/mk$(BOARD)spl -endif +# necessary to create built-in.o +obj- := __dummy__.o -# Fix ME after we implement hostprogs-y. -ifdef CONFIG_SPL_BUILD -$(OBJTREE)/tools/mk$(BOARD)spl: tools/mkv310_image.c - $(HOSTCC) tools/mkv310_image.c -o $(OBJTREE)/tools/mk$(BOARD)spl +hostprogs-y := tools/mksmdkv310spl +always := $(hostprogs-y) +else +obj-y += smdkv310.o endif diff --git a/board/samsung/smdkv310/tools/mkv310_image.c b/board/samsung/smdkv310/tools/mksmdkv310spl.c index 9a64ca6ad6..9a64ca6ad6 100644 --- a/board/samsung/smdkv310/tools/mkv310_image.c +++ b/board/samsung/smdkv310/tools/mksmdkv310spl.c diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 640a193dc2..b72550538a 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -28,6 +28,7 @@ #include <power/max17042_fg.h> #include <usb.h> #include <usb_mass_storage.h> +#include <samsung/misc.h> #include "setup.h" @@ -742,7 +743,7 @@ vidinfo_t panel_info = { .vl_hsp = CONFIG_SYS_LOW, .vl_vsp = CONFIG_SYS_LOW, .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ + .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */ /* s6e8ax0 Panel infomation */ .vl_hspw = 5, @@ -786,3 +787,21 @@ void init_panel_info(vidinfo_t *vid) setenv("lcdinfo", "lcd=s6e8ax0"); } + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif +#ifdef CONFIG_LCD_MENU + keys_init(); + check_boot_mode(); +#endif +#ifdef CONFIG_CMD_BMP + if (panel_info.logo_on) + draw_logo(); +#endif + return 0; +} +#endif diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index be15357e69..c17c24d60a 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -28,6 +28,7 @@ #include <usb.h> #include <usb/s3c_udc.h> #include <usb_mass_storage.h> +#include <samsung/misc.h> DECLARE_GLOBAL_DATA_PTR; @@ -72,15 +73,12 @@ static void check_hw_revision(void) int checkboard(void) { puts("Board:\tTRATS2\n"); + printf("HW Revision:\t0x%04x\n", board_rev); + return 0; } #endif -static void show_hw_revision(void) -{ - printf("HW Revision:\t0x%04x\n", board_rev); -} - u32 get_board_rev(void) { return board_rev; @@ -144,17 +142,17 @@ static void board_init_i2c(void) int get_soft_i2c_scl_pin(void) { if (I2C_ADAP_HWNR) - return exynos4x12_gpio_part2_get_nr(m2, 1); /* I2C9 */ + return exynos4x12_gpio_get(2, m2, 1); /* I2C9 */ else - return exynos4x12_gpio_part1_get_nr(f1, 4); /* I2C8 */ + return exynos4x12_gpio_get(1, f1, 4); /* I2C8 */ } int get_soft_i2c_sda_pin(void) { if (I2C_ADAP_HWNR) - return exynos4x12_gpio_part2_get_nr(m2, 0); /* I2C9 */ + return exynos4x12_gpio_get(2, m2, 0); /* I2C9 */ else - return exynos4x12_gpio_part1_get_nr(f1, 5); /* I2C8 */ + return exynos4x12_gpio_get(1, f1, 5); /* I2C8 */ } #endif @@ -568,7 +566,7 @@ vidinfo_t panel_info = { .vl_hsp = CONFIG_SYS_LOW, .vl_vsp = CONFIG_SYS_LOW, .vl_dp = CONFIG_SYS_LOW, - .vl_bpix = 5, /* Bits per pixel, 2^5 = 32 */ + .vl_bpix = 4, /* Bits per pixel, 2^4 = 16 */ /* s6e8ax0 Panel infomation */ .vl_hspw = 5, @@ -618,11 +616,17 @@ void init_panel_info(vidinfo_t *vid) #ifdef CONFIG_MISC_INIT_R int misc_init_r(void) { - setenv("model", "GT-I8800"); - setenv("board", "TRATS2"); - - show_hw_revision(); - +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif +#ifdef CONFIG_LCD_MENU + keys_init(); + check_boot_mode(); +#endif +#ifdef CONFIG_CMD_BMP + if (panel_info.logo_on) + draw_logo(); +#endif return 0; } #endif diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 3feef3f777..96da7e0861 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -22,6 +22,7 @@ #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> #include <power/max8998_pmic.h> +#include <samsung/misc.h> DECLARE_GLOBAL_DATA_PTR; @@ -446,7 +447,7 @@ vidinfo_t panel_info = { .vl_vsp = CONFIG_SYS_HIGH, .vl_dp = CONFIG_SYS_HIGH, - .vl_bpix = 5, /* Bits per pixel */ + .vl_bpix = 4, /* Bits per pixel */ /* LD9040 LCD Panel */ .vl_hspw = 2, @@ -511,3 +512,21 @@ int board_init(void) return 0; } + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + set_board_info(); +#endif +#ifdef CONFIG_LCD_MENU + keys_init(); + check_boot_mode(); +#endif +#ifdef CONFIG_CMD_BMP + if (panel_info.logo_on) + draw_logo(); +#endif + return 0; +} +#endif diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile index f890008be2..ce29b4100e 100644 --- a/board/sandburst/karef/Makefile +++ b/board/sandburst/karef/Makefile @@ -10,11 +10,7 @@ # # TBS: add for debugging purposes -BUILDUSER := $(shell whoami) -FORCEBUILD := $(shell rm -f karef.o) - -CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' -# TBS: end debugging +ccflags-y += -DBUILDUSER='"$(shell whoami)"' obj-y = karef.o ../common/flash.o ../common/sb_common.o extra-y += init.o diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile index 37d91a51a3..2c1028bd2b 100644 --- a/board/sandburst/metrobox/Makefile +++ b/board/sandburst/metrobox/Makefile @@ -9,11 +9,7 @@ # # TBS: add for debugging purposes -BUILDUSER := $(shell whoami) -FORCEBUILD := $(shell rm -f metrobox.o) - -CFLAGS += -DBUILDUSER='"$(BUILDUSER)"' -# TBS: end debugging +ccflags-y += -DBUILDUSER='"$(shell whoami)"' obj-y = metrobox.o ../common/flash.o ../common/sb_common.o extra-y += init.o diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c index 6c316faa8f..217237900e 100644 --- a/board/siemens/dxr2/board.c +++ b/board/siemens/dxr2/board.c @@ -198,7 +198,7 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 0, .phy_if = PHY_INTERFACE_MODE_MII, }, }; @@ -232,6 +232,13 @@ int board_eth_init(bd_t *bis) factoryset_setenv(); + /* Reset SMSC LAN9303 switch for default configuration */ + gpio_request(GPIO_LAN9303_NRST, "nRST"); + gpio_direction_output(GPIO_LAN9303_NRST, 0); + /* assert active low reset for 200us */ + udelay(200); + gpio_set_value(GPIO_LAN9303_NRST, 1); + /* Set rgmii mode and enable rmii clock to be sourced from chip */ writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel); diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c index 5c22999bb8..f2314b5d3e 100644 --- a/board/siemens/dxr2/mux.c +++ b/board/siemens/dxr2/mux.c @@ -221,6 +221,8 @@ static struct module_pin_mux gpios_pin_mux[] = { {OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS}, {OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS}, {OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS}, + /* nRST for SMSC LAN9303 switch - GPIO2_24 */ + {OFFSET(lcd_pclk), MODE(7) }, /* LAN9303 nRST */ {-1}, }; diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index ef3d6cc158..98083d52cd 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -181,13 +181,13 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 0, .phy_if = PHY_INTERFACE_MODE_RMII, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_id = 1, + .phy_addr = 1, .phy_if = PHY_INTERFACE_MODE_RMII, }, }; diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index 25ab54d9a2..e0ada3f6a5 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -143,13 +143,13 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 1, + .phy_addr = 1, .phy_if = PHY_INTERFACE_MODE_RMII, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_id = 0, + .phy_addr = 0, .phy_if = PHY_INTERFACE_MODE_RMII, }, }; diff --git a/board/silica/pengwyn/Makefile b/board/silica/pengwyn/Makefile new file mode 100644 index 0000000000..c8b4f9a280 --- /dev/null +++ b/board/silica/pengwyn/Makefile @@ -0,0 +1,13 @@ +# +# Makefile +# +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y) +obj-y := mux.o +endif + +obj-y += board.o diff --git a/board/silica/pengwyn/board.c b/board/silica/pengwyn/board.c new file mode 100644 index 0000000000..ee88b6f399 --- /dev/null +++ b/board/silica/pengwyn/board.c @@ -0,0 +1,207 @@ +/* + * board.c + * + * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <i2c.h> +#include <phy.h> +#include <cpsw.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +#if defined(CONFIG_SPL_BUILD) + +/* DDR3 RAM timings */ +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41K128MJT187E_RD_DQS, + .datawdsratio0 = MT41K128MJT187E_WR_DQS, + .datafwsratio0 = MT41K128MJT187E_PHY_FIFO_WE, + .datawrsratio0 = MT41K128MJT187E_PHY_WR_DATA, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41K128MJT187E_RATIO, + .cmd0iclkout = MT41K128MJT187E_INVERT_CLKOUT, + .cmd1csratio = MT41K128MJT187E_RATIO, + .cmd1iclkout = MT41K128MJT187E_INVERT_CLKOUT, + .cmd2csratio = MT41K128MJT187E_RATIO, + .cmd2iclkout = MT41K128MJT187E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41K128MJT187E_EMIF_SDCFG, + .ref_ctrl = MT41K128MJT187E_EMIF_SDREF, + .sdram_tim1 = MT41K128MJT187E_EMIF_TIM1, + .sdram_tim2 = MT41K128MJT187E_EMIF_TIM2, + .sdram_tim3 = MT41K128MJT187E_EMIF_TIM3, + .zq_config = MT41K128MJT187E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K128MJT187E_EMIF_READ_LATENCY | + PHY_EN_DYN_PWRDN, +}; + +const struct ctrl_ioregs ddr3_ioregs = { + .cm0ioctl = MT41K128MJT187E_IOCTRL_VALUE, + .cm1ioctl = MT41K128MJT187E_IOCTRL_VALUE, + .cm2ioctl = MT41K128MJT187E_IOCTRL_VALUE, + .dt0ioctl = MT41K128MJT187E_IOCTRL_VALUE, + .dt1ioctl = MT41K128MJT187E_IOCTRL_VALUE, +}; + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + return serial_tstc() && serial_getc() == 'c'; +} +#endif + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr_266 = { + 266, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_303 = { + 303, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_400 = { + 400, OSC-1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + /* + * The pengwyn board uses the TPS650250 PMIC without I2C + * interface and will output the following fixed voltages: + * DCDC1=3V3 (IO) DCDC2=1V5 (DDR) DCDC3=1V26 (Vmpu) + * VLDO1=1V8 (IO) VLDO2=1V8(IO) + * Vcore=1V1 is fixed, generated by TPS62231 + */ + + /* Get the frequency */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* 720MHz cpu, this might change on newer board revisions */ + dpll_mpu_opp100.m = MPUPLL_M_720; + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + /* future configs can return other clock settings */ + return &dpll_ddr_303; +} + +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +void sdram_init(void) +{ + config_ddr(303, &ddr3_ioregs, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +} +#endif /* if CONFIG_SPL_BUILD */ + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + gpmc_init(); + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + .phy_if = PHY_INTERFACE_MODE_MII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 1, + .phy_if = PHY_INTERFACE_MODE_MII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + int rv, n = 0; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + printf("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + return n; + } + + writel(MII_MODE_ENABLE, &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + return n; +} +#endif /* if CONFIG_DRIVER_TI_CPSW */ diff --git a/board/silica/pengwyn/board.h b/board/silica/pengwyn/board.h new file mode 100644 index 0000000000..05addf6bb2 --- /dev/null +++ b/board/silica/pengwyn/board.h @@ -0,0 +1,15 @@ +/* + * board.h + * + * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_board_pin_mux(void); + +#endif diff --git a/board/silica/pengwyn/mux.c b/board/silica/pengwyn/mux.c new file mode 100644 index 0000000000..c8be440a20 --- /dev/null +++ b/board/silica/pengwyn/mux.c @@ -0,0 +1,98 @@ +/* + * mux.c + * + * Copyright (C) 2013 Lothar Felten <lothar.felten@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include "board.h" + +/* UART0 pins E15(rx),E16(tx) [E17(rts),E18(cts)] */ +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +/* unused: UART1 pins D15(tx),D16(rx),D17(cts),D18(rts) */ + +/* I2C pins C16(scl)/C17(sda) */ +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C0_DATA */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C0_SCLK */ + {-1}, +}; + +/* MMC0 pins */ +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ + {-1}, +}; + +/* MII pins */ +static struct module_pin_mux mii1_pin_mux[] = { + {OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */ + {OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */ + {OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */ + {OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */ + {OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */ + {OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */ + {OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */ + {OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */ + {OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */ + {OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */ + {OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */ + {OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */ + {OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +/* NAND pins */ +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_board_pin_mux() +{ + configure_module_pin_mux(i2c0_pin_mux); + configure_module_pin_mux(uart0_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(nand_pin_mux); +} diff --git a/board/spear/common/Makefile b/board/spear/common/Makefile index 08dc09f06d..b0ba320481 100644 --- a/board/spear/common/Makefile +++ b/board/spear/common/Makefile @@ -5,7 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_BUILD +# necessary to create built-in.o +obj- := __dummy__.o +else obj-y := spr_misc.o obj-y += spr_lowlevel_init.o endif diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c index e25aba2f28..6b6bd9f29d 100644 --- a/board/spear/spear300/spear300.c +++ b/board/spear/spear300/spear300.c @@ -53,8 +53,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DESIGNWARE_ETH) u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif return ret; diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c index 70f9aa16ea..a4c6a8edb0 100644 --- a/board/spear/spear310/spear310.c +++ b/board/spear/spear310/spear310.c @@ -54,8 +54,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DESIGNWARE_ETH) u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif #if defined(CONFIG_MACB) diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c index f6b1fdd0e6..ab732a724c 100644 --- a/board/spear/spear320/spear320.c +++ b/board/spear/spear320/spear320.c @@ -65,8 +65,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DESIGNWARE_ETH) u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif #if defined(CONFIG_MACB) diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c index e996a0e381..8472002f74 100644 --- a/board/spear/spear600/spear600.c +++ b/board/spear/spear600/spear600.c @@ -51,8 +51,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DW_AUTONEG) interface = PHY_INTERFACE_MODE_GMII; #endif - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif return ret; diff --git a/board/spear/x600/Makefile b/board/spear/x600/Makefile index f9053feec3..18d3dd2e6f 100644 --- a/board/spear/x600/Makefile +++ b/board/spear/x600/Makefile @@ -5,6 +5,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_BUILD +# necessary to create built-in.o +obj- := __dummy__.o +else obj-y := fpga.o x600.o endif diff --git a/board/spear/x600/x600.c b/board/spear/x600/x600.c index 044d2049ef..b8edfcd071 100644 --- a/board/spear/x600/x600.c +++ b/board/spear/x600/x600.c @@ -67,31 +67,32 @@ void board_nand_init(void) fsmc_nand_init(nand); } -int designware_board_phy_init(struct eth_device *dev, int phy_addr, - int (*mii_write)(struct eth_device *, u8, u8, u16), - int dw_reset_phy(struct eth_device *)) +int board_phy_config(struct phy_device *phydev) { /* Extended PHY control 1, select GMII */ - mii_write(dev, phy_addr, 23, 0x0020); + phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020); /* Software reset necessary after GMII mode selction */ - dw_reset_phy(dev); + phy_reset(phydev); /* Enable extended page register access */ - mii_write(dev, phy_addr, 31, 0x0001); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001); /* 17e: Enhanced LED behavior, needs to be written twice */ - mii_write(dev, phy_addr, 17, 0x09ff); - mii_write(dev, phy_addr, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); /* 16e: Enhanced LED method select */ - mii_write(dev, phy_addr, 16, 0xe0ea); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea); /* Disable extended page register access */ - mii_write(dev, phy_addr, 31, 0x0000); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000); /* Enable clock output pin */ - mii_write(dev, phy_addr, 18, 0x0049); + phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049); + + if (phydev->drv->config) + phydev->drv->config(phydev); return 0; } @@ -100,7 +101,7 @@ int board_eth_init(bd_t *bis) { int ret = 0; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_PHY_ADDR, + if (designware_initialize(CONFIG_SPEAR_ETHBASE, PHY_INTERFACE_MODE_GMII) >= 0) ret++; diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile index 6867a70b7c..f0605e2bcd 100644 --- a/board/st-ericsson/snowball/Makefile +++ b/board/st-ericsson/snowball/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS += -D__RELEASE -D__STN_8500 +ccflags-y += -D__RELEASE -D__STN_8500 obj-y := snowball.o diff --git a/board/st-ericsson/u8500/Makefile b/board/st-ericsson/u8500/Makefile index b9dfbe9359..d6c4280475 100644 --- a/board/st-ericsson/u8500/Makefile +++ b/board/st-ericsson/u8500/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS += -D__RELEASE -D__STN_8500 +ccflags-y += -D__RELEASE -D__STN_8500 obj-y := u8500_href.o gpio.o diff --git a/board/synopsys/arcangel4/Makefile b/board/synopsys/arcangel4/Makefile new file mode 100644 index 0000000000..575e58fd96 --- /dev/null +++ b/board/synopsys/arcangel4/Makefile @@ -0,0 +1,11 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +# This board is mostly used for debugging U-Boot in simulation (ISS). +# The only peripheral which is used on this board is a serial port which +# requires no initialization except those in "include/configs/arcangel4.h". +# And now there's no specific initializations for this board. +# So this Makefile is only required for satisfaction of U-Boot build system. diff --git a/board/synopsys/axs101/Makefile b/board/synopsys/axs101/Makefile new file mode 100644 index 0000000000..f0965f7841 --- /dev/null +++ b/board/synopsys/axs101/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += axs101.o +obj-$(CONFIG_CMD_NAND) += nand.o diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c new file mode 100644 index 0000000000..d1271ffcca --- /dev/null +++ b/board/synopsys/axs101/axs101.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dwmmc.h> +#include <malloc.h> +#include <netdev.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_mmc_init(bd_t *bis) +{ + struct dwmci_host *host = NULL; + + host = malloc(sizeof(struct dwmci_host)); + if (!host) { + printf("dwmci_host malloc fail!\n"); + return 1; + } + + memset(host, 0, sizeof(struct dwmci_host)); + host->name = "Synopsys Mobile storage"; + host->ioaddr = (void *)ARC_DWMMC_BASE; + host->buswidth = 4; + host->dev_index = 0; + host->bus_hz = 25000000; + + add_dwmci(host, 52000000, 400000); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + if (designware_initialize(ARC_DWGMAC_BASE, + PHY_INTERFACE_MODE_RGMII) >= 0) + return 1; + + return 0; +} diff --git a/board/synopsys/axs101/nand.c b/board/synopsys/axs101/nand.c new file mode 100644 index 0000000000..8672803871 --- /dev/null +++ b/board/synopsys/axs101/nand.c @@ -0,0 +1,226 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <bouncebuf.h> +#include <common.h> +#include <malloc.h> +#include <nand.h> +#include <asm/io.h> + +#define BUS_WIDTH 8 /* AXI data bus width in bytes */ + +/* DMA buffer descriptor bits & masks */ +#define BD_STAT_OWN (1 << 31) +#define BD_STAT_BD_FIRST (1 << 3) +#define BD_STAT_BD_LAST (1 << 2) +#define BD_SIZES_BUFFER1_MASK 0xfff + +#define BD_STAT_BD_COMPLETE (BD_STAT_BD_FIRST | BD_STAT_BD_LAST) + +/* Controller command flags */ +#define B_WFR (1 << 19) /* 1b - Wait for ready */ +#define B_LC (1 << 18) /* 1b - Last cycle */ +#define B_IWC (1 << 13) /* 1b - Interrupt when complete */ + +/* NAND cycle types */ +#define B_CT_ADDRESS (0x0 << 16) /* Address operation */ +#define B_CT_COMMAND (0x1 << 16) /* Command operation */ +#define B_CT_WRITE (0x2 << 16) /* Write operation */ +#define B_CT_READ (0x3 << 16) /* Write operation */ + +enum nand_isr_t { + NAND_ISR_DATAREQUIRED = 0, + NAND_ISR_TXUNDERFLOW, + NAND_ISR_TXOVERFLOW, + NAND_ISR_DATAAVAILABLE, + NAND_ISR_RXUNDERFLOW, + NAND_ISR_RXOVERFLOW, + NAND_ISR_TXDMACOMPLETE, + NAND_ISR_RXDMACOMPLETE, + NAND_ISR_DESCRIPTORUNAVAILABLE, + NAND_ISR_CMDDONE, + NAND_ISR_CMDAVAILABLE, + NAND_ISR_CMDERROR, + NAND_ISR_DATATRANSFEROVER, + NAND_ISR_NONE +}; + +enum nand_regs_t { + AC_FIFO = 0, /* address and command fifo */ + IDMAC_BDADDR = 0x18, /* idmac descriptor list base address */ + INT_STATUS = 0x118, /* interrupt status register */ + INT_CLR_STATUS = 0x120, /* interrupt clear status register */ +}; + +struct nand_bd { + uint32_t status; /* DES0 */ + uint32_t sizes; /* DES1 */ + uint32_t buffer_ptr0; /* DES2 */ + uint32_t buffer_ptr1; /* DES3 */ +}; + +#define NAND_REG_WRITE(r, v) writel(v, CONFIG_SYS_NAND_BASE + r) +#define NAND_REG_READ(r) readl(CONFIG_SYS_NAND_BASE + r) + +static struct nand_bd *bd; /* DMA buffer descriptors */ + +/** + * axs101_nand_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static uint32_t nand_flag_is_set(uint32_t flag) +{ + uint32_t reg = NAND_REG_READ(INT_STATUS); + + if (reg & (1 << NAND_ISR_CMDERROR)) + return 0; + + if (reg & (1 << flag)) { + NAND_REG_WRITE(INT_CLR_STATUS, 1 << flag); + return 1; + } + + return 0; +} + +/** + * axs101_nand_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void axs101_nand_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) +{ + struct bounce_buffer bbstate; + + bounce_buffer_start(&bbstate, (void *)buf, len, GEN_BB_READ); + + /* Setup buffer descriptor */ + writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status); + writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes); + writel(bbstate.bounce_buffer, &bd->buffer_ptr0); + writel(0, &bd->buffer_ptr1); + + /* Issue "write" command */ + NAND_REG_WRITE(AC_FIFO, B_CT_WRITE | B_WFR | B_IWC | B_LC | (len-1)); + + /* Wait for NAND command and DMA to complete */ + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; + while (!nand_flag_is_set(NAND_ISR_TXDMACOMPLETE)) + ; + + bounce_buffer_stop(&bbstate); +} + +/** + * axs101_nand_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store data + * @len: number of bytes to read + */ +static void axs101_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct bounce_buffer bbstate; + + bounce_buffer_start(&bbstate, buf, len, GEN_BB_WRITE); + + /* Setup buffer descriptor */ + writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status); + writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes); + writel(bbstate.bounce_buffer, &bd->buffer_ptr0); + writel(0, &bd->buffer_ptr1); + + /* Issue "read" command */ + NAND_REG_WRITE(AC_FIFO, B_CT_READ | B_WFR | B_IWC | B_LC | (len - 1)); + + /* Wait for NAND command and DMA to complete */ + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; + while (!nand_flag_is_set(NAND_ISR_RXDMACOMPLETE)) + ; + + bounce_buffer_stop(&bbstate); +} + +/** + * axs101_nand_read_byte - read one byte from the chip + * @mtd: MTD device structure + */ +static u_char axs101_nand_read_byte(struct mtd_info *mtd) +{ + u8 byte; + + axs101_nand_read_buf(mtd, (uchar *)&byte, sizeof(byte)); + return byte; +} + +/** + * axs101_nand_read_word - read one word from the chip + * @mtd: MTD device structure + */ +static u16 axs101_nand_read_word(struct mtd_info *mtd) +{ + u16 word; + + axs101_nand_read_buf(mtd, (uchar *)&word, sizeof(word)); + return word; +} + +/** + * axs101_nand_hwcontrol - NAND control functions wrapper. + * @mtd: MTD device structure + * @cmd: Command + */ +static void axs101_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) +{ + if (cmd == NAND_CMD_NONE) + return; + + cmd = cmd & 0xff; + + switch (ctrl & (NAND_ALE | NAND_CLE)) { + /* Address */ + case NAND_ALE: + cmd |= B_CT_ADDRESS; + break; + + /* Command */ + case NAND_CLE: + cmd |= B_CT_COMMAND | B_WFR; + + break; + + default: + debug("%s: unknown ctrl %#x\n", __func__, ctrl); + } + + NAND_REG_WRITE(AC_FIFO, cmd | B_LC); + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; +} + +int board_nand_init(struct nand_chip *nand) +{ + bd = (struct nand_bd *)memalign(ARCH_DMA_MINALIGN, + sizeof(struct nand_bd)); + + /* Set buffer descriptor address in IDMAC */ + NAND_REG_WRITE(IDMAC_BDADDR, bd); + + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = axs101_nand_hwcontrol; + nand->read_byte = axs101_nand_read_byte; + nand->read_word = axs101_nand_read_word; + nand->write_buf = axs101_nand_write_buf; + nand->read_buf = axs101_nand_read_buf; + + return 0; +} diff --git a/board/tcm-bf518/config.mk b/board/tcm-bf518/config.mk index f1ef9bf682..0d3df2dbd9 100644 --- a/board/tcm-bf518/config.mk +++ b/board/tcm-bf518/config.mk @@ -7,6 +7,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif diff --git a/board/tcm-bf537/config.mk b/board/tcm-bf537/config.mk index 973d357559..97eaafef2e 100644 --- a/board/tcm-bf537/config.mk +++ b/board/tcm-bf537/config.mk @@ -7,9 +7,10 @@ # SPDX-License-Identifier: GPL-2.0+ # -CFLAGS_lib += -O2 -CFLAGS_lib/lzma += -O2 -CFLAGS_lib/zlib += -O2 +# FIX ME +ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) +ccflags-y := -O2 +endif # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 57217688d6..7609a18368 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -544,12 +544,12 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 0, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_id = 1, + .phy_addr = 1, }, }; @@ -602,6 +602,21 @@ int board_eth_init(bd_t *bis) } #ifdef CONFIG_DRIVER_TI_CPSW + + mac_lo = readl(&cdev->macid1l); + mac_hi = readl(&cdev->macid1h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (!getenv("eth1addr")) { + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("eth1addr", mac_addr); + } + if (read_eeprom(&header) < 0) puts("Could not get board ID.\n"); diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds index 6a734b30ac..ceb20226ff 100644 --- a/board/ti/am335x/u-boot.lds +++ b/board/ti/am335x/u-boot.lds @@ -77,7 +77,12 @@ SECTIONS *(.__rel_dyn_end) } - _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .; /* * Deprecated: this MMU section is used by pxa at present but @@ -108,7 +113,7 @@ SECTIONS KEEP(*(.__bss_end)); } - .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 4e6846a50a..d7449770a3 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -19,9 +19,13 @@ #include <asm/arch/gpio.h> #include <asm/emif.h> #include "board.h" +#include <miiphy.h> +#include <cpsw.h> DECLARE_GLOBAL_DATA_PTR; +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + /* * Read header information from EEPROM into global structure. */ @@ -200,7 +204,7 @@ const struct emif_regs ddr3_emif_regs_400Mhz = { .read_idle_ctrl = 0x00050000, .zq_config = 0x50074BE4, .temp_alert_config = 0x0, - .emif_ddr_phy_ctlr_1 = 0x0E084008, + .emif_ddr_phy_ctlr_1 = 0x0E004008, .emif_ddr_ext_phy_ctrl_1 = 0x08020080, .emif_ddr_ext_phy_ctrl_2 = 0x00400040, .emif_ddr_ext_phy_ctrl_3 = 0x00400040, @@ -346,14 +350,14 @@ static void enable_vtt_regulator(void) u32 temp; /* enable module */ - writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL); - - /* enable output for GPIO0_22 */ - writel(GPIO_SETDATAOUT(GPIO_22), - AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT); - temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE); - temp = temp & ~(GPIO_OE_ENABLE(GPIO_22)); - writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE); + writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL); + + /* enable output for GPIO5_7 */ + writel(GPIO_SETDATAOUT(7), + AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT); + temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE); + temp = temp & ~(GPIO_OE_ENABLE(7)); + writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE); } void sdram_init(void) @@ -402,3 +406,97 @@ int board_late_init(void) return 0; } #endif + +#ifdef CONFIG_DRIVER_TI_CPSW + +static void cpsw_control(int enabled) +{ + /* Additional controls can be added here */ + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 16, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + int rv; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (!getenv("ethaddr")) { + puts("<ethaddr> not set. Validating first E-fuse MAC\n"); + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + + mac_lo = readl(&cdev->macid1l); + mac_hi = readl(&cdev->macid1h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (!getenv("eth1addr")) { + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("eth1addr", mac_addr); + } + + if (board_is_eposevm()) { + writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII; + cpsw_slaves[0].phy_addr = 16; + } else { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII; + cpsw_slaves[0].phy_addr = 0; + } + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + + return rv; +} +#endif diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c index 810b1941db..77c53d2e90 100644 --- a/board/ti/am43xx/mux.c +++ b/board/ti/am43xx/mux.c @@ -11,6 +11,41 @@ #include <asm/arch/mux.h> #include "board.h" +static struct module_pin_mux rmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ + {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TD0 */ + {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RD0 */ + {OFFSET(mii1_rxdv), MODE(1) | RXACTIVE}, /* RMII1_RXDV */ + {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS_DV */ + {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ + {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_refclk */ + {-1}, +}; + +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {-1}, +}; + +static struct module_pin_mux mdio_pin_mux[] = { + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)}, @@ -33,8 +68,18 @@ static struct module_pin_mux i2c0_pin_mux[] = { {-1}, }; -static struct module_pin_mux gpio0_22_pin_mux[] = { - {OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)}, /* GPIO0_22 */ +static struct module_pin_mux gpio5_7_pin_mux[] = { + {OFFSET(spi0_cs0), (MODE(7) | PULLUP_EN)}, /* GPIO5_7 */ + {-1}, +}; + +static struct module_pin_mux qspi_pin_mux[] = { + {OFFSET(gpmc_csn0), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_CS0 */ + {OFFSET(gpmc_csn3), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* QSPI_CLK */ + {OFFSET(gpmc_advn_ale), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D0 */ + {OFFSET(gpmc_oen_ren), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D1 */ + {OFFSET(gpmc_wen), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D2 */ + {OFFSET(gpmc_be0n_cle), (MODE(3) | PULLUP_EN | RXACTIVE)}, /* QSPI_D3 */ {-1}, }; @@ -47,9 +92,15 @@ void enable_board_pin_mux(void) { configure_module_pin_mux(mmc0_pin_mux); configure_module_pin_mux(i2c0_pin_mux); + configure_module_pin_mux(mdio_pin_mux); - if (board_is_gpevm()) - configure_module_pin_mux(gpio0_22_pin_mux); + if (board_is_gpevm()) { + configure_module_pin_mux(gpio5_7_pin_mux); + configure_module_pin_mux(rgmii1_pin_mux); + } else if (board_is_eposevm()) { + configure_module_pin_mux(rmii1_pin_mux); + configure_module_pin_mux(qspi_pin_mux); + } } void enable_i2c0_pin_mux(void) diff --git a/board/ti/dra7xx/README b/board/ti/dra7xx/README new file mode 100644 index 0000000000..2fdaeac31e --- /dev/null +++ b/board/ti/dra7xx/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'dra7xx_evm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} dra7xx/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} dra7xx/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 1b60b8f672..c6c4fd1743 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -12,6 +12,7 @@ */ #include <common.h> #include <palmas.h> +#include <sata.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sata.h> @@ -80,7 +81,7 @@ int board_init(void) int board_late_init(void) { - omap_sata_init(); + init_sata(0); return 0; } @@ -148,12 +149,12 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x208, .sliver_reg_ofs = 0xd80, - .phy_id = 0, + .phy_addr = 2, }, { .slave_reg_ofs = 0x308, .sliver_reg_ofs = 0xdc0, - .phy_id = 1, + .phy_addr = 3, }, }; @@ -215,6 +216,21 @@ int board_eth_init(bd_t *bis) if (is_valid_ether_addr(mac_addr)) eth_setenv_enetaddr("ethaddr", mac_addr); } + + mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); + mac_hi = readl((*ctrl)->control_core_mac_id_1_hi); + mac_addr[0] = (mac_hi & 0xFF0000) >> 16; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = mac_hi & 0xFF; + mac_addr[3] = (mac_lo & 0xFF0000) >> 16; + mac_addr[4] = (mac_lo & 0xFF00) >> 8; + mac_addr[5] = mac_lo & 0xFF; + + if (!getenv("eth1addr")) { + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("eth1addr", mac_addr); + } + ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); ctrl_val |= 0x22; writel(ctrl_val, (*ctrl)->control_core_control_io1); diff --git a/board/ti/omap5912osk/lowlevel_init.S b/board/ti/omap5912osk/lowlevel_init.S index cad0a5acd8..e05a1c7b55 100644 --- a/board/ti/omap5912osk/lowlevel_init.S +++ b/board/ti/omap5912osk/lowlevel_init.S @@ -18,10 +18,6 @@ #include <./configs/omap1510.h> #endif - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - .globl lowlevel_init lowlevel_init: diff --git a/board/ti/omap5_uevm/README b/board/ti/omap5_uevm/README new file mode 100644 index 0000000000..970e2eceb7 --- /dev/null +++ b/board/ti/omap5_uevm/README @@ -0,0 +1,25 @@ +Summary +======= + +This document covers various features of the 'omap5_uevm' build and some +related uses. + +eMMC boot partition use +======================= + +It is possible, depending on SYSBOOT configuration to boot from the eMMC +boot partitions using (name depending on documentation referenced) +Alternative Boot operation mode or Boot Sequence Option 1/2. In this +example we load MLO and u-boot.img from the build into DDR and then use +'mmc bootbus' to set the required rate (see TRM) and 'mmc partconfig' to +set boot0 as the boot device. +U-Boot # setenv autoload no +U-Boot # usb start +U-Boot # dhcp +U-Boot # mmc dev 1 1 +U-Boot # tftp ${loadaddr} omap5uevm/MLO +U-Boot # mmc write ${loadaddr} 0 100 +U-Boot # tftp ${loadaddr} omap5uevm/u-boot.img +U-Boot # mmc write ${loadaddr} 300 400 +U-Boot # mmc bootbus 1 2 0 2 +U-Boot # mmc partconf 1 1 1 0 diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index b549d72900..3eaa5ac398 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -15,6 +15,7 @@ #include "mux_data.h" #if defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_XHCI_OMAP) +#include <sata.h> #include <usb.h> #include <asm/gpio.h> #include <asm/arch/clock.h> @@ -70,7 +71,7 @@ int board_init(void) int board_late_init(void) { - omap_sata_init(); + init_sata(0); return 0; } diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index 140ad7103a..54b3dfb82c 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -132,12 +132,12 @@ static struct cpsw_slave_data cpsw_slaves[] = { { .slave_reg_ofs = 0x50, .sliver_reg_ofs = 0x700, - .phy_id = 1, + .phy_addr = 1, }, { .slave_reg_ofs = 0x90, .sliver_reg_ofs = 0x740, - .phy_id = 0, + .phy_addr = 0, }, }; diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts deleted file mode 100644 index c0e54af886..0000000000 --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts +++ /dev/null @@ -1,45 +0,0 @@ -/dts-v1/; - -#include "tegra20.dtsi" - -/ { - model = "Toradex Colibri T20"; - compatible = "toradex,t20", "nvidia,tegra20"; - - aliases { - usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; - usb2 = "/usb@c5004000"; - sdhci0 = "/sdhci@c8000600"; - }; - - usb@c5000000 { - dr_mode = "otg"; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */ - nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */ - }; - - usb@c5008000 { - nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */ - }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */ - nvidia,width = <8>; - nvidia,timing = <15 100 25 80 25 10 15 10 100>; - - nand@0 { - reg = <0>; - compatible = "nand-flash"; - }; - }; - - sdhci@c8000600 { - status = "okay"; - cd-gpios = <&gpio 23 1>; /* gpio PC7 */ - bus-width = <4>; - }; -}; diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index b6fdde4d1b..5dbf94e44e 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -54,7 +54,12 @@ SECTIONS . = ALIGN(0x800); - _end = .; + .end : + { + *(.__end) + } + + _image_binary_end = .; .bss __rel_dyn_start (OVERLAY) : { __bss_start = .; @@ -63,7 +68,7 @@ SECTIONS __bss_end = .; } - .dynsym _end : { *(.dynsym) } + .dynsym _image_binary_end : { *(.dynsym) } .dynbss : { *(.dynbss) } .dynstr : { *(.dynstr*) } .dynamic : { *(.dynamic*) } diff --git a/board/xilinx/dts/microblaze-generic.dts b/board/xilinx/dts/microblaze-generic.dts deleted file mode 100644 index 203330987b..0000000000 --- a/board/xilinx/dts/microblaze-generic.dts +++ /dev/null @@ -1,7 +0,0 @@ -/dts-v1/; -/ { - #address-cells = <1>; - #size-cells = <1>; - aliases { - } ; -} ; diff --git a/board/xilinx/dts/zynq-microzed.dts b/board/xilinx/dts/zynq-microzed.dts deleted file mode 100644 index 6da71c116d..0000000000 --- a/board/xilinx/dts/zynq-microzed.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx MicroZED board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq MicroZED Board"; - compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc702.dts b/board/xilinx/dts/zynq-zc702.dts deleted file mode 100644 index 667dc28256..0000000000 --- a/board/xilinx/dts/zynq-zc702.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC702 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC702 Board"; - compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc706.dts b/board/xilinx/dts/zynq-zc706.dts deleted file mode 100644 index 526fc8888b..0000000000 --- a/board/xilinx/dts/zynq-zc706.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC706 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC706 Board"; - compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc770-xm010.dts b/board/xilinx/dts/zynq-zc770-xm010.dts deleted file mode 100644 index 8b542a109b..0000000000 --- a/board/xilinx/dts/zynq-zc770-xm010.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC770 XM010 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC770 XM010 Board"; - compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc770-xm012.dts b/board/xilinx/dts/zynq-zc770-xm012.dts deleted file mode 100644 index 0379a07068..0000000000 --- a/board/xilinx/dts/zynq-zc770-xm012.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC770 XM012 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC770 XM012 Board"; - compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zc770-xm013.dts b/board/xilinx/dts/zynq-zc770-xm013.dts deleted file mode 100644 index a4f9e05fc0..0000000000 --- a/board/xilinx/dts/zynq-zc770-xm013.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZC770 XM013 board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZC770 XM013 Board"; - compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/dts/zynq-zed.dts b/board/xilinx/dts/zynq-zed.dts deleted file mode 100644 index 91a5deba4a..0000000000 --- a/board/xilinx/dts/zynq-zed.dts +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Xilinx ZED board DTS - * - * Copyright (C) 2013 Xilinx, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/dts-v1/; -#include "zynq-7000.dtsi" - -/ { - model = "Zynq ZED Board"; - compatible = "xlnx,zynq-zed", "xlnx,zynq-7000"; -}; diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile index 6301a8c149..3f19a1cd8b 100644 --- a/board/xilinx/zynq/Makefile +++ b/board/xilinx/zynq/Makefile @@ -6,3 +6,4 @@ # obj-y := board.o +obj-$(CONFIG_SPL_BUILD) += ps7_init.o diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index a5b9bdef46..82f2345c95 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -12,17 +12,12 @@ DECLARE_GLOBAL_DATA_PTR; -/* Bootmode setting values */ -#define ZYNQ_BM_MASK 0x0F -#define ZYNQ_BM_NOR 0x02 -#define ZYNQ_BM_SD 0x05 -#define ZYNQ_BM_JTAG 0x0 - #ifdef CONFIG_FPGA Xilinx_desc fpga; /* It can be done differently */ Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); +Xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15); Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); @@ -40,6 +35,9 @@ int board_init(void) case XILINX_ZYNQ_7010: fpga = fpga010; break; + case XILINX_ZYNQ_7015: + fpga = fpga015; + break; case XILINX_ZYNQ_7020: fpga = fpga020; break; @@ -55,8 +53,6 @@ int board_init(void) } #endif - icache_enable(); - #ifdef CONFIG_FPGA fpga_init(); fpga_add(fpga_xilinx, &fpga); @@ -85,7 +81,6 @@ int board_late_init(void) return 0; } -#ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { u32 ret = 0; @@ -119,7 +114,6 @@ int board_eth_init(bd_t *bis) #endif return ret; } -#endif #ifdef CONFIG_CMD_MMC int board_mmc_init(bd_t *bd) diff --git a/board/xilinx/zynq/ps7_init.c b/board/xilinx/zynq/ps7_init.c new file mode 100644 index 0000000000..c47da09b9e --- /dev/null +++ b/board/xilinx/zynq/ps7_init.c @@ -0,0 +1,12 @@ +/* + * (C) Copyright 2014 Xilinx, Inc. Michal Simek + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/spl.h> + +__weak void ps7_init(void) +{ + puts("Please copy ps7_init.c/h from hw project\n"); +} |