diff options
Diffstat (limited to 'board')
40 files changed, 486 insertions, 530 deletions
diff --git a/board/avnet/fx12mm/Kconfig b/board/avnet/fx12mm/Kconfig deleted file mode 100644 index 0b67ebde93..0000000000 --- a/board/avnet/fx12mm/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_FX12MM - -config SYS_BOARD - default "fx12mm" - -config SYS_VENDOR - default "avnet" - -config SYS_CONFIG_NAME - default "fx12mm" - -endif diff --git a/board/avnet/fx12mm/MAINTAINERS b/board/avnet/fx12mm/MAINTAINERS deleted file mode 100644 index c92e258df9..0000000000 --- a/board/avnet/fx12mm/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -FX12MM BOARD -M: Georg Schardt <schardt@team-ctech.de> -S: Maintained -F: board/avnet/fx12mm/ -F: include/configs/fx12mm.h -F: configs/fx12mm_defconfig -F: configs/fx12mm_flash_defconfig diff --git a/board/avnet/fx12mm/Makefile b/board/avnet/fx12mm/Makefile deleted file mode 100644 index 618b42f891..0000000000 --- a/board/avnet/fx12mm/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += fx12mm.o - -include $(srctree)/board/xilinx/ppc405-generic/Makefile diff --git a/board/avnet/fx12mm/fx12mm.c b/board/avnet/fx12mm/fx12mm.c deleted file mode 100644 index 92e1cfb75f..0000000000 --- a/board/avnet/fx12mm/fx12mm.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Author: Xilinx Inc. - * - * Modified by: - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - -int checkboard(void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - if (l < 0) { - printf("Avnet Virtex4 FX12 with no serial #"); - } else { - printf("Avnet Virtex4 FX12 Minimodul # "); - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc(buf[i]); - } - } - putc('\n'); - return 0; -} diff --git a/board/avnet/fx12mm/xparameters.h b/board/avnet/fx12mm/xparameters.h deleted file mode 100644 index 94f682f8ec..0000000000 --- a/board/avnet/fx12mm/xparameters.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * (C) Copyright 2008 - * - * Georg Schardt <schardt@team-ctech.de> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * CAUTION: This file is based on the xparameters.h automatically - * generated by libgen. Version: Xilinx EDK 10.1.02 Build EDK_K_SP2.5 - */ - -#ifndef __XPARAMETER_H__ -#define __XPARAMETER_H__ - -/* RS232 */ -#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 -#define XPAR_UARTNS550_0_BASEADDR 0x83E00000 - - -/* INT_C */ -#define XPAR_XPS_INTC_0_DEVICE_ID 0 -#define XPAR_XPS_INTC_0_BASEADDR 0x81800000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 2 - -/* CPU core clock */ -#define XPAR_CORE_CLOCK_FREQ_HZ 300000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 - -/* RAM */ -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 - -/* FLASH */ -#define XPAR_FLASH_MEM0_BASEADDR 0xFFC00000 - -#endif diff --git a/board/avnet/v5fx30teval/Kconfig b/board/avnet/v5fx30teval/Kconfig deleted file mode 100644 index 079387b707..0000000000 --- a/board/avnet/v5fx30teval/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_V5FX30TEVAL - -config SYS_BOARD - default "v5fx30teval" - -config SYS_VENDOR - default "avnet" - -config SYS_CONFIG_NAME - default "v5fx30teval" - -endif diff --git a/board/avnet/v5fx30teval/MAINTAINERS b/board/avnet/v5fx30teval/MAINTAINERS deleted file mode 100644 index 91dde7a5c8..0000000000 --- a/board/avnet/v5fx30teval/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -V5FX30TEVAL BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> -S: Maintained -F: board/avnet/v5fx30teval/ -F: include/configs/v5fx30teval.h -F: configs/v5fx30teval_defconfig -F: configs/v5fx30teval_flash_defconfig diff --git a/board/avnet/v5fx30teval/Makefile b/board/avnet/v5fx30teval/Makefile deleted file mode 100644 index 8c41af02d4..0000000000 --- a/board/avnet/v5fx30teval/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += v5fx30teval.o - -include $(srctree)/board/xilinx/ppc440-generic/Makefile diff --git a/board/avnet/v5fx30teval/v5fx30teval.c b/board/avnet/v5fx30teval/v5fx30teval.c deleted file mode 100644 index 68b0eb959d..0000000000 --- a/board/avnet/v5fx30teval/v5fx30teval.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - - -int checkboard(void) -{ - puts("Avnet Virtex 5 FX30 Evaluation Board\n"); - return 0; -} diff --git a/board/avnet/v5fx30teval/xparameters.h b/board/avnet/v5fx30teval/xparameters.h deleted file mode 100644 index 95b8c285ad..0000000000 --- a/board/avnet/v5fx30teval/xparameters.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * based on xparameters.h by Xilinx - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFF000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 51d2814a43..be114cebef 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -76,5 +76,6 @@ obj-$(CONFIG_LAYERSCAPE_NS_ACCESS) += ns_access.o ifdef CONFIG_SECURE_BOOT obj-$(CONFIG_CMD_ESBC_VALIDATE) += fsl_validate.o cmd_esbc_validate.o endif +obj-$(CONFIG_CHAIN_OF_TRUST) += fsl_chain_of_trust.o endif diff --git a/board/freescale/common/cmd_esbc_validate.c b/board/freescale/common/cmd_esbc_validate.c index 8bbe85bb3b..dfa3e2100e 100644 --- a/board/freescale/common/cmd_esbc_validate.c +++ b/board/freescale/common/cmd_esbc_validate.c @@ -11,6 +11,11 @@ static int do_esbc_halt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + if (fsl_check_boot_mode_secure() == 0) { + printf("Boot Mode is Non-Secure. Not entering spin loop.\n"); + return 0; + } + printf("Core is entering spin loop.\n"); loop: goto loop; @@ -21,10 +26,29 @@ loop: static int do_esbc_validate(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + char *hash_str = NULL; + uintptr_t haddr; + int ret; + if (argc < 2) return cmd_usage(cmdtp); + else if (argc > 2) + /* Second arg - Optional - Hash Str*/ + hash_str = argv[2]; + + /* First argument - header address -32/64bit */ + haddr = (uintptr_t)simple_strtoul(argv[1], NULL, 16); - return fsl_secboot_validate(cmdtp, flag, argc, argv); + /* With esbc_validate command, Image address must be + * part of header. So, the function is called + * by passing this argument as 0. + */ + ret = fsl_secboot_validate(haddr, hash_str, 0); + if (ret) + return 1; + + printf("esbc_validate command successful\n"); + return 0; } /***************************************************/ @@ -45,6 +69,6 @@ U_BOOT_CMD( U_BOOT_CMD( esbc_halt, 1, 0, do_esbc_halt, - "Put the core in spin loop ", + "Put the core in spin loop (Secure Boot Only)", "" ); diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c new file mode 100644 index 0000000000..ecfcc8253a --- /dev/null +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -0,0 +1,70 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fsl_validate.h> +#include <fsl_sfp.h> + +#ifdef CONFIG_LS102XA +#include <asm/arch/immap_ls102xa.h> +#endif + +#if defined(CONFIG_MPC85xx) +#define CONFIG_DCFG_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR +#else +#define CONFIG_DCFG_ADDR CONFIG_SYS_FSL_GUTS_ADDR +#endif + +#ifdef CONFIG_SYS_FSL_CCSR_GUR_LE +#define gur_in32(a) in_le32(a) +#else +#define gur_in32(a) in_be32(a) +#endif + +/* Check the Boot Mode. If Secure, return 1 else return 0 */ +int fsl_check_boot_mode_secure(void) +{ + uint32_t val; + struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + struct ccsr_gur __iomem *gur = (void *)(CONFIG_DCFG_ADDR); + + val = sfp_in32(&sfp_regs->ospr) & ITS_MASK; + if (val == ITS_MASK) + return 1; + +#if defined(CONFIG_FSL_CORENET) || !defined(CONFIG_MPC85xx) + /* For PBL based platforms check the SB_EN bit in RCWSR */ + val = gur_in32(&gur->rcwsr[RCW_SB_EN_REG_INDEX - 1]) & RCW_SB_EN_MASK; + if (val == RCW_SB_EN_MASK) + return 1; +#endif + +#if defined(CONFIG_MPC85xx) && !defined(CONFIG_FSL_CORENET) + /* For Non-PBL Platforms, check the Device Status register 2*/ + val = gur_in32(&gur->pordevsr2) & MPC85xx_PORDEVSR2_SBC_MASK; + if (val != MPC85xx_PORDEVSR2_SBC_MASK) + return 1; + +#endif + return 0; +} + +int fsl_setenv_chain_of_trust(void) +{ + /* Check Boot Mode + * If Boot Mode is Non-Secure, no changes are required + */ + if (fsl_check_boot_mode_secure() == 0) + return 0; + + /* If Boot mode is Secure, set the environment variables + * bootdelay = 0 (To disable Boot Prompt) + * bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) + */ + setenv("bootdelay", "0"); + setenv("bootcmd", CONFIG_CHAIN_BOOT_CMD); + return 0; +} diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index b510c71c40..8fd6dd63b1 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -24,6 +24,10 @@ #define SHA256_NIBBLES (256/4) #define NUM_HEX_CHARS (sizeof(ulong) * 2) +#define CHECK_KEY_LEN(key_len) (((key_len) == 2 * KEY_SIZE_BYTES / 4) || \ + ((key_len) == 2 * KEY_SIZE_BYTES / 2) || \ + ((key_len) == 2 * KEY_SIZE_BYTES)) + /* This array contains DER value for SHA-256 */ static const u8 hash_identifier[] = { 0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, @@ -179,20 +183,97 @@ static u32 is_key_revoked(u32 keynum, u32 rev_flag) return 0; } -/* It validates srk_table key lengths.*/ -static u32 validate_srk_tbl(struct srk_table *tbl, u32 num_entries) +/* It read validates srk_table key lengths.*/ +static u32 read_validate_srk_tbl(struct fsl_secboot_img_priv *img) { int i = 0; - for (i = 0; i < num_entries; i++) { - if (!((tbl[i].key_len == 2 * KEY_SIZE_BYTES/4) || - (tbl[i].key_len == 2 * KEY_SIZE_BYTES/2) || - (tbl[i].key_len == 2 * KEY_SIZE_BYTES))) + u32 ret, key_num, key_revoc_flag, size; + struct fsl_secboot_img_hdr *hdr = &img->hdr; + void *esbc = (u8 *)(uintptr_t)img->ehdrloc; + + if ((hdr->len_kr.num_srk == 0) || + (hdr->len_kr.num_srk > MAX_KEY_ENTRIES)) + return ERROR_ESBC_CLIENT_HEADER_INVALID_SRK_NUM_ENTRY; + + key_num = hdr->len_kr.srk_sel; + if (key_num == 0 || key_num > hdr->len_kr.num_srk) + return ERROR_ESBC_CLIENT_HEADER_INVALID_KEY_NUM; + + /* Get revoc key from sfp */ + key_revoc_flag = get_key_revoc(); + ret = is_key_revoked(key_num, key_revoc_flag); + if (ret) + return ERROR_ESBC_CLIENT_HEADER_KEY_REVOKED; + + size = hdr->len_kr.num_srk * sizeof(struct srk_table); + + memcpy(&img->srk_tbl, esbc + hdr->srk_tbl_off, size); + + for (i = 0; i < hdr->len_kr.num_srk; i++) { + if (!CHECK_KEY_LEN(img->srk_tbl[i].key_len)) return ERROR_ESBC_CLIENT_HEADER_INV_SRK_ENTRY_KEYLEN; } + + img->key_len = img->srk_tbl[key_num - 1].key_len; + + memcpy(&img->img_key, &(img->srk_tbl[key_num - 1].pkey), + img->key_len); + + return 0; +} +#endif + +static u32 read_validate_single_key(struct fsl_secboot_img_priv *img) +{ + struct fsl_secboot_img_hdr *hdr = &img->hdr; + void *esbc = (u8 *)(uintptr_t)img->ehdrloc; + + /* check key length */ + if (!CHECK_KEY_LEN(hdr->key_len)) + return ERROR_ESBC_CLIENT_HEADER_KEY_LEN; + + memcpy(&img->img_key, esbc + hdr->pkey, hdr->key_len); + + img->key_len = hdr->key_len; + + return 0; +} + +#if defined(CONFIG_FSL_ISBC_KEY_EXT) +static u32 read_validate_ie_tbl(struct fsl_secboot_img_priv *img) +{ + struct fsl_secboot_img_hdr *hdr = &img->hdr; + u32 ie_key_len, ie_revoc_flag, ie_num; + struct ie_key_info *ie_info; + + if (get_ie_info_addr(&img->ie_addr)) + return ERROR_IE_TABLE_NOT_FOUND; + ie_info = (struct ie_key_info *)(uintptr_t)img->ie_addr; + if (ie_info->num_keys == 0 || ie_info->num_keys > 32) + return ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY; + + ie_num = hdr->ie_key_sel; + if (ie_num == 0 || ie_num > ie_info->num_keys) + return ERROR_ESBC_CLIENT_HEADER_INVALID_IE_KEY_NUM; + + ie_revoc_flag = ie_info->key_revok; + if ((u32)(1 << (ie_num - 1)) & ie_revoc_flag) + return ERROR_ESBC_CLIENT_HEADER_IE_KEY_REVOKED; + + ie_key_len = ie_info->ie_key_tbl[ie_num - 1].key_len; + + if (!CHECK_KEY_LEN(ie_key_len)) + return ERROR_ESBC_CLIENT_HEADER_INV_IE_ENTRY_KEYLEN; + + memcpy(&img->img_key, &(ie_info->ie_key_tbl[ie_num - 1].pkey), + ie_key_len); + + img->key_len = ie_key_len; return 0; } #endif + /* This function return length of public key.*/ static inline u32 get_key_len(struct fsl_secboot_img_priv *img) { @@ -289,6 +370,13 @@ void fsl_secboot_handle_error(int error) printf("ERROR :: %x :: %s\n", error, e->name); } + /* If Boot Mode is secure, transition the SNVS state and issue + * reset based on type of failure and ITS setting. + * If Boot mode is non-secure, return from this function. + */ + if (fsl_check_boot_mode_secure() == 0) + return; + switch (error) { case ERROR_ESBC_CLIENT_HEADER_BARKER: case ERROR_ESBC_CLIENT_HEADER_IMG_SIZE: @@ -455,13 +543,8 @@ static int calc_esbchdr_esbc_hash(struct fsl_secboot_img_priv *img) return ret; /* Update hash for actual Image */ -#ifdef CONFIG_ESBC_ADDR_64BIT - ret = algo->hash_update(algo, ctx, - (u8 *)(uintptr_t)img->hdr.pimg64, img->hdr.img_size, 1); -#else ret = algo->hash_update(algo, ctx, - (u8 *)(uintptr_t)img->hdr.pimg, img->hdr.img_size, 1); -#endif + (u8 *)img->img_addr, img->img_size, 1); if (ret) return ret; @@ -541,13 +624,9 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) struct fsl_secboot_img_hdr *hdr = &img->hdr; void *esbc = (u8 *)(uintptr_t)img->ehdrloc; u8 *k, *s; + u32 ret = 0; + #ifdef CONFIG_KEY_REVOCATION - u32 ret; - u32 key_num, key_revoc_flag, size; -#endif -#if defined(CONFIG_FSL_ISBC_KEY_EXT) - struct ie_key_info *ie_info; - u32 ie_num, ie_revoc_flag, ie_key_len; #endif int key_found = 0; @@ -555,93 +634,48 @@ static int read_validate_esbc_client_header(struct fsl_secboot_img_priv *img) if (memcmp(hdr->barker, barker_code, ESBC_BARKER_LEN)) return ERROR_ESBC_CLIENT_HEADER_BARKER; -#ifdef CONFIG_ESBC_ADDR_64BIT - sprintf(buf, "%llx", hdr->pimg64); -#else - sprintf(buf, "%x", hdr->pimg); -#endif + /* If Image Address is not passed as argument to function, + * then Address and Size must be read from the Header. + */ + if (img->img_addr == 0) { + #ifdef CONFIG_ESBC_ADDR_64BIT + img->img_addr = hdr->pimg64; + #else + img->img_addr = hdr->pimg; + #endif + } + + sprintf(buf, "%lx", img->img_addr); setenv("img_addr", buf); if (!hdr->img_size) return ERROR_ESBC_CLIENT_HEADER_IMG_SIZE; + img->img_size = hdr->img_size; + /* Key checking*/ #ifdef CONFIG_KEY_REVOCATION if (check_srk(img)) { - if ((hdr->len_kr.num_srk == 0) || - (hdr->len_kr.num_srk > MAX_KEY_ENTRIES)) - return ERROR_ESBC_CLIENT_HEADER_INVALID_SRK_NUM_ENTRY; - - key_num = hdr->len_kr.srk_sel; - if (key_num == 0 || key_num > hdr->len_kr.num_srk) - return ERROR_ESBC_CLIENT_HEADER_INVALID_KEY_NUM; - - /* Get revoc key from sfp */ - key_revoc_flag = get_key_revoc(); - ret = is_key_revoked(key_num, key_revoc_flag); - if (ret) - return ERROR_ESBC_CLIENT_HEADER_KEY_REVOKED; - - size = hdr->len_kr.num_srk * sizeof(struct srk_table); - - memcpy(&img->srk_tbl, esbc + hdr->srk_tbl_off, size); - - ret = validate_srk_tbl(img->srk_tbl, hdr->len_kr.num_srk); - + ret = read_validate_srk_tbl(img); if (ret != 0) return ret; - - img->key_len = img->srk_tbl[key_num - 1].key_len; - - memcpy(&img->img_key, &(img->srk_tbl[key_num - 1].pkey), - img->key_len); - key_found = 1; } #endif #if defined(CONFIG_FSL_ISBC_KEY_EXT) if (!key_found && check_ie(img)) { - if (get_ie_info_addr(&img->ie_addr)) - return ERROR_IE_TABLE_NOT_FOUND; - ie_info = (struct ie_key_info *)(uintptr_t)img->ie_addr; - if (ie_info->num_keys == 0 || ie_info->num_keys > 32) - return ERROR_ESBC_CLIENT_HEADER_INVALID_IE_NUM_ENTRY; - - ie_num = hdr->ie_key_sel; - if (ie_num == 0 || ie_num > ie_info->num_keys) - return ERROR_ESBC_CLIENT_HEADER_INVALID_IE_KEY_NUM; - - ie_revoc_flag = ie_info->key_revok; - if ((u32)(1 << (ie_num - 1)) & ie_revoc_flag) - return ERROR_ESBC_CLIENT_HEADER_IE_KEY_REVOKED; - - ie_key_len = ie_info->ie_key_tbl[ie_num - 1].key_len; - - if (!((ie_key_len == 2 * KEY_SIZE_BYTES / 4) || - (ie_key_len == 2 * KEY_SIZE_BYTES / 2) || - (ie_key_len == 2 * KEY_SIZE_BYTES))) - return ERROR_ESBC_CLIENT_HEADER_INV_IE_ENTRY_KEYLEN; - - memcpy(&img->img_key, &(ie_info->ie_key_tbl[ie_num - 1].pkey), - ie_key_len); - - img->key_len = ie_key_len; + ret = read_validate_ie_tbl(img); + if (ret != 0) + return ret; key_found = 1; } #endif if (key_found == 0) { - /* check key length */ - if (!((hdr->key_len == 2 * KEY_SIZE_BYTES / 4) || - (hdr->key_len == 2 * KEY_SIZE_BYTES / 2) || - (hdr->key_len == 2 * KEY_SIZE_BYTES))) - return ERROR_ESBC_CLIENT_HEADER_KEY_LEN; - - memcpy(&img->img_key, esbc + hdr->pkey, hdr->key_len); - - img->key_len = hdr->key_len; - + ret = read_validate_single_key(img); + if (ret != 0) + return ret; key_found = 1; } @@ -698,27 +732,73 @@ static inline int str2longbe(const char *p, ulong *num) return *p != '\0' && *endptr == '\0'; } +/* Function to calculate the ESBC Image Hash + * and hash from Digital signature. + * The Two hash's are compared to yield the + * result of signature validation. + */ +static int calculate_cmp_img_sig(struct fsl_secboot_img_priv *img) +{ + int ret; + uint32_t key_len; + struct key_prop prop; +#if !defined(USE_HOSTCC) + struct udevice *mod_exp_dev; +#endif + ret = calc_esbchdr_esbc_hash(img); + if (ret) + return ret; + + /* Construct encoded hash EM' wrt PKCSv1.5 */ + construct_img_encoded_hash_second(img); + + /* Fill prop structure for public key */ + memset(&prop, 0, sizeof(struct key_prop)); + key_len = get_key_len(img) / 2; + prop.modulus = img->img_key; + prop.public_exponent = img->img_key + key_len; + prop.num_bits = key_len * 8; + prop.exp_len = key_len; + + ret = uclass_get_device(UCLASS_MOD_EXP, 0, &mod_exp_dev); + if (ret) { + printf("RSA: Can't find Modular Exp implementation\n"); + return -EINVAL; + } + + ret = rsa_mod_exp(mod_exp_dev, img->img_sign, img->hdr.sign_len, + &prop, img->img_encoded_hash); + if (ret) + return ret; + + /* + * compare the encoded messages EM' and EM wrt RSA PKCSv1.5 + * memcmp returns zero on success + * memcmp returns non-zero on failure + */ + ret = memcmp(&img->img_encoded_hash_second, &img->img_encoded_hash, + img->hdr.sign_len); -int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) + if (ret) + return ERROR_ESBC_CLIENT_HASH_COMPARE_EM; + + return 0; +} + +int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str, + uintptr_t img_addr) { struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); ulong hash[SHA256_BYTES/sizeof(ulong)]; char hash_str[NUM_HEX_CHARS + 1]; - ulong addr = simple_strtoul(argv[1], NULL, 16); struct fsl_secboot_img_priv *img; struct fsl_secboot_img_hdr *hdr; void *esbc; int ret, i, hash_cmd = 0; u32 srk_hash[8]; - uint32_t key_len; - struct key_prop prop; -#if !defined(USE_HOSTCC) - struct udevice *mod_exp_dev; -#endif - if (argc == 3) { - char *cp = argv[2]; + if (arg_hash_str != NULL) { + const char *cp = arg_hash_str; int i = 0; if (*cp == '0' && *(cp + 1) == 'x') @@ -731,7 +811,7 @@ int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, */ if (strlen(cp) != SHA256_NIBBLES) { printf("%s is not a 256 bits hex string as expected\n", - argv[2]); + arg_hash_str); return -1; } @@ -741,7 +821,7 @@ int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, hash_str[NUM_HEX_CHARS] = '\0'; if (!str2longbe(hash_str, &hash[i])) { printf("%s is not a 256 bits hex string ", - argv[2]); + arg_hash_str); return -1; } } @@ -756,9 +836,11 @@ int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, memset(img, 0, sizeof(struct fsl_secboot_img_priv)); + /* Update the information in Private Struct */ hdr = &img->hdr; - img->ehdrloc = addr; - esbc = (u8 *)(uintptr_t)img->ehdrloc; + img->ehdrloc = haddr; + img->img_addr = img_addr; + esbc = (u8 *)img->ehdrloc; memcpy(hdr, esbc, sizeof(struct fsl_secboot_img_hdr)); @@ -800,51 +882,12 @@ int fsl_secboot_validate(cmd_tbl_t *cmdtp, int flag, int argc, goto exit; } - ret = calc_esbchdr_esbc_hash(img); + ret = calculate_cmp_img_sig(img); if (ret) { - fsl_secblk_handle_error(ret); - goto exit; - } - - /* Construct encoded hash EM' wrt PKCSv1.5 */ - construct_img_encoded_hash_second(img); - - /* Fill prop structure for public key */ - memset(&prop, 0, sizeof(struct key_prop)); - key_len = get_key_len(img) / 2; - prop.modulus = img->img_key; - prop.public_exponent = img->img_key + key_len; - prop.num_bits = key_len * 8; - prop.exp_len = key_len; - - ret = uclass_get_device(UCLASS_MOD_EXP, 0, &mod_exp_dev); - if (ret) { - printf("RSA: Can't find Modular Exp implementation\n"); - return -EINVAL; - } - - ret = rsa_mod_exp(mod_exp_dev, img->img_sign, img->hdr.sign_len, - &prop, img->img_encoded_hash); - if (ret) { - fsl_secblk_handle_error(ret); - goto exit; - } - - /* - * compare the encoded messages EM' and EM wrt RSA PKCSv1.5 - * memcmp returns zero on success - * memcmp returns non-zero on failure - */ - ret = memcmp(&img->img_encoded_hash_second, &img->img_encoded_hash, - img->hdr.sign_len); - - if (ret) { - fsl_secboot_handle_error(ERROR_ESBC_CLIENT_HASH_COMPARE_EM); + fsl_secboot_handle_error(ret); goto exit; } - printf("esbc_validate command successful\n"); - exit: - return 0; + return ret; } diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 9f6b0e7f31..113295f64a 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -216,6 +216,39 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #else printf("Not implemented\n"); #endif + } else if (strcmp(argv[1], "sd") == 0) { +#ifdef QIXIS_LBMAP_SD + QIXIS_WRITE(rst_ctl, 0x30); + QIXIS_WRITE(rcfg_ctl, 0); + set_lbmap(QIXIS_LBMAP_SD); + set_rcw_src(QIXIS_RCW_SRC_SD); + QIXIS_WRITE(rcfg_ctl, 0x20); + QIXIS_WRITE(rcfg_ctl, 0x21); +#else + printf("Not implemented\n"); +#endif + } else if (strcmp(argv[1], "sd_qspi") == 0) { +#ifdef QIXIS_LBMAP_SD_QSPI + QIXIS_WRITE(rst_ctl, 0x30); + QIXIS_WRITE(rcfg_ctl, 0); + set_lbmap(QIXIS_LBMAP_SD_QSPI); + set_rcw_src(QIXIS_RCW_SRC_SD); + qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x20); + qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x21); +#else + printf("Not implemented\n"); +#endif + } else if (strcmp(argv[1], "qspi") == 0) { +#ifdef QIXIS_LBMAP_QSPI + QIXIS_WRITE(rst_ctl, 0x30); + QIXIS_WRITE(rcfg_ctl, 0); + set_lbmap(QIXIS_LBMAP_QSPI); + set_rcw_src(QIXIS_RCW_SRC_QSPI); + qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x20); + qixis_write_i2c(offsetof(struct qixis, rcfg_ctl), 0x21); +#else + printf("Not implemented\n"); +#endif } else if (strcmp(argv[1], "watchdog") == 0) { static char *period[9] = {"2s", "4s", "8s", "16s", "32s", "1min", "2min", "4min", "8min"}; @@ -255,6 +288,9 @@ U_BOOT_CMD( "- hard reset to default bank\n" "qixis_reset altbank - reset to alternate bank\n" "qixis_reset nand - reset to nand\n" + "qixis_reset sd - reset to sd\n" + "qixis_reset sd_qspi - reset to sd with qspi support\n" + "qixis_reset qspi - reset to qspi\n" "qixis watchdog <watchdog_period> - set the watchdog period\n" " period: 1s 2s 4s 8s 16s 32s 1min 2min 4min 8min\n" "qixis_reset dump - display the QIXIS registers\n" diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index be3358a564..5f4ec9d878 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -22,6 +22,7 @@ #include <fsl_sec.h> #include <spl.h> #include <fsl_devdis.h> +#include <fsl_validate.h> #include "../common/sleep.h" #include "../common/qixis.h" @@ -369,6 +370,9 @@ int board_late_init(void) #ifdef CONFIG_SCSI_AHCI_PLAT ls1021a_sata_init(); #endif +#ifdef CONFIG_CHAIN_OF_TRUST + fsl_setenv_chain_of_trust(); +#endif return 0; } diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 8eaff5f0ce..b85774c4a4 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -30,6 +30,7 @@ #ifdef CONFIG_U_QE #include "../../../drivers/qe/qe.h" #endif +#include <fsl_validate.h> DECLARE_GLOBAL_DATA_PTR; @@ -549,6 +550,9 @@ int board_late_init(void) #ifdef CONFIG_SCSI_AHCI_PLAT ls1021a_sata_init(); #endif +#ifdef CONFIG_CHAIN_OF_TRUST + fsl_setenv_chain_of_trust(); +#endif return 0; } diff --git a/board/freescale/ls1043aqds/MAINTAINERS b/board/freescale/ls1043aqds/MAINTAINERS index 0c7f648b6c..65a0af1930 100644 --- a/board/freescale/ls1043aqds/MAINTAINERS +++ b/board/freescale/ls1043aqds/MAINTAINERS @@ -7,3 +7,5 @@ F: configs/ls1043aqds_defconfig F: configs/ls1043aqds_nor_ddr3_defconfig F: configs/ls1043aqds_nand_defconfig F: configs/ls1043aqds_sdcard_ifc_defconfig +F: configs/ls1043aqds_sdcard_qspi_defconfig +F: configs/ls1043aqds_qspi_defconfig diff --git a/board/freescale/ls1043aqds/README b/board/freescale/ls1043aqds/README index 6261a778aa..a6fd7a35f5 100644 --- a/board/freescale/ls1043aqds/README +++ b/board/freescale/ls1043aqds/README @@ -94,3 +94,4 @@ a) Promjet Boot b) NOR boot c) NAND boot d) SD boot +e) QSPI boot diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c index 42d906824a..3d3c53385a 100644 --- a/board/freescale/ls1043aqds/ddr.c +++ b/board/freescale/ls1043aqds/ddr.c @@ -132,9 +132,22 @@ void dram_init_banksize(void) * The address needs to add the offset of its bank. */ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; - gd->bd->bi_dram[0].size = gd->ram_size; + if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + gd->bd->bi_dram[1].size = gd->ram_size - + CONFIG_SYS_DDR_BLOCK1_SIZE; #ifdef CONFIG_SYS_MEM_RESERVE_SECURE - gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; - gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; + gd->secure_ram = gd->bd->bi_dram[1].start + + gd->secure_ram - + CONFIG_SYS_DDR_BLOCK1_SIZE; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; #endif + } else { + gd->bd->bi_dram[0].size = gd->ram_size; +#ifdef CONFIG_SYS_MEM_RESERVE_SECURE + gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram; + gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; +#endif + } } diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index d6696ca812..01db078222 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -40,11 +40,14 @@ enum { #define CFG_SD_MUX3_MUX4 0x1 /* MUX4 */ #define CFG_SD_MUX4_SLOT3 0x0 /* SLOT3 TX/RX1 */ #define CFG_SD_MUX4_SLOT1 0x1 /* SLOT1 TX/RX3 */ +#define CFG_UART_MUX_MASK 0x6 +#define CFG_UART_MUX_SHIFT 1 +#define CFG_LPUART_EN 0x1 int checkboard(void) { char buf[64]; -#ifndef CONFIG_SD_BOOT +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) u8 sw; #endif @@ -52,6 +55,8 @@ int checkboard(void) #ifdef CONFIG_SD_BOOT puts("SD\n"); +#elif defined(CONFIG_QSPI_BOOT) + puts("QSPI\n"); #else sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -218,7 +223,17 @@ void board_retimer_init(void) int board_early_init_f(void) { +#ifdef CONFIG_LPUART + u8 uart; +#endif fsl_lsch2_early_init_f(); +#ifdef CONFIG_LPUART + /* We use lpuart0 as system console */ + uart = QIXIS_READ(brdcfg[14]); + uart &= ~CFG_UART_MUX_MASK; + uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT; + QIXIS_WRITE(brdcfg[14], uart); +#endif return 0; } @@ -303,6 +318,16 @@ int board_init(void) #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { + u64 base[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; + + /* fixup DT for the two DDR banks */ + base[0] = gd->bd->bi_dram[0].start; + size[0] = gd->bd->bi_dram[0].size; + base[1] = gd->bd->bi_dram[1].start; + size[1] = gd->bd->bi_dram[1].size; + + fdt_fixup_memory_banks(blob, base, size, 2); ft_cpu_setup(blob, bd); #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg new file mode 100644 index 0000000000..7783521b95 --- /dev/null +++ b/board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg @@ -0,0 +1,8 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 +# RCW +# Enable QSPI; disable IFC +08100010 0a000000 00000000 00000000 +14550002 80004012 60040000 c1002000 +00000000 00000000 00000000 00038800 +20124000 00001100 00000096 00000001 diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index dfa6293222..ccd4ec955b 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -12,7 +12,6 @@ #include <common.h> #include <config.h> #include <fdtdec.h> -#include <netdev.h> #include <asm/processor.h> #include <asm/microblaze_intc.h> #include <asm/asm.h> @@ -24,7 +23,6 @@ DECLARE_GLOBAL_DATA_PTR; static int reset_pin = -1; #endif -#if CONFIG_IS_ENABLED(OF_CONTROL) ulong ram_base; void dram_init_banksize(void) @@ -58,14 +56,6 @@ int dram_init(void) return 0; }; -#else -int dram_init(void) -{ - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; - - return 0; -} -#endif int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -86,7 +76,7 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int gpio_init (void) +static int gpio_init(void) { #ifdef CONFIG_XILINX_GPIO reset_pin = gpio_alloc(CONFIG_SYS_GPIO_0_ADDR, "reset", 1); @@ -96,32 +86,9 @@ int gpio_init (void) return 0; } -void board_init(void) +int board_late_init(void) { gpio_init(); -} -int board_eth_init(bd_t *bis) -{ - int ret = 0; - -#ifdef CONFIG_XILINX_AXIEMAC - ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, - XILINX_AXIDMA_BASEADDR); -#endif - -#if defined(CONFIG_XILINX_EMACLITE) && defined(XILINX_EMACLITE_BASEADDR) - u32 txpp = 0; - u32 rxpp = 0; -# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG - txpp = 1; -# endif -# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG - rxpp = 1; -# endif - ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, - txpp, rxpp); -#endif - - return ret; + return 0; } diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h index 8ba146cb88..ccb528ed92 100644 --- a/board/xilinx/microblaze-generic/xparameters.h +++ b/board/xilinx/microblaze-generic/xparameters.h @@ -28,15 +28,6 @@ #define XILINX_TIMER_BASEADDR 0x41c00000 #define XILINX_TIMER_IRQ 0 -/* Uart pheriphery is RS232_Uart */ -#define XILINX_UARTLITE_BASEADDR 0x40600000 -#define XILINX_UARTLITE_BAUDRATE 115200 - -/* IIC pheriphery is IIC_EEPROM */ -#define XILINX_IIC_0_BASEADDR 0x40800000 -#define XILINX_IIC_0_FREQ 100000 -#define XILINX_IIC_0_BIT 0 - /* GPIO is LEDs_4Bit*/ #define XILINX_GPIO_BASEADDR 0x40000000 @@ -44,18 +35,6 @@ #define XILINX_FLASH_START 0x2c000000 #define XILINX_FLASH_SIZE 0x00800000 -/* Main Memory is DDR_SDRAM_64Mx32 */ -#define XILINX_RAM_START 0x28000000 -#define XILINX_RAM_SIZE 0x04000000 - -/* Sysace Controller is SysACE_CompactFlash */ -#define XILINX_SYSACE_BASEADDR 0x41800000 -#define XILINX_SYSACE_HIGHADDR 0x4180ffff -#define XILINX_SYSACE_MEM_WIDTH 16 - -/* Ethernet controller is Ethernet_MAC */ -#define XILINX_EMACLITE_BASEADDR 0x40C00000 - /* Watchdog IP is wxi_timebase_wdt_0 */ #define XILINX_WATCHDOG_BASEADDR 0x50000000 #define XILINX_WATCHDOG_IRQ 1 diff --git a/board/xilinx/ml507/Kconfig b/board/xilinx/ml507/Kconfig deleted file mode 100644 index d580a7beaf..0000000000 --- a/board/xilinx/ml507/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ML507 - -config SYS_BOARD - default "ml507" - -config SYS_VENDOR - default "xilinx" - -config SYS_CONFIG_NAME - default "ml507" - -endif diff --git a/board/xilinx/ml507/MAINTAINERS b/board/xilinx/ml507/MAINTAINERS deleted file mode 100644 index 8b40f44500..0000000000 --- a/board/xilinx/ml507/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -ML507 BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> -S: Maintained -F: board/xilinx/ml507/ -F: include/configs/ml507.h -F: configs/ml507_defconfig -F: configs/ml507_flash_defconfig diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile deleted file mode 100644 index 9a3809f3c0..0000000000 --- a/board/xilinx/ml507/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2008 -# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es -# This work has been supported by: Qtechnology http://qtec.com/ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ml507.o - -include $(srctree)/board/xilinx/ppc440-generic/Makefile diff --git a/board/xilinx/ml507/ml507.c b/board/xilinx/ml507/ml507.c deleted file mode 100644 index 83b764b733..0000000000 --- a/board/xilinx/ml507/ml507.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <config.h> -#include <common.h> -#include <asm/processor.h> - - -int checkboard(void) -{ - puts("Xilinx ML507 Board\n"); - return 0; -} diff --git a/board/xilinx/ml507/xparameters.h b/board/xilinx/ml507/xparameters.h deleted file mode 100644 index e30e592bbe..0000000000 --- a/board/xilinx/ml507/xparameters.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es - * This work has been supported by: QTechnology http://qtec.com/ - * based on xparameters-ml507.h by Xilinx - * - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef XPARAMETER_H -#define XPARAMETER_H - -#define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 -#define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 -#define XPAR_PLB_CLOCK_FREQ_HZ 100000000 -#define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 - -#endif diff --git a/board/xilinx/ppc405-generic/MAINTAINERS b/board/xilinx/ppc405-generic/MAINTAINERS index 2b0c98dc8b..ba48f50c29 100644 --- a/board/xilinx/ppc405-generic/MAINTAINERS +++ b/board/xilinx/ppc405-generic/MAINTAINERS @@ -1,5 +1,5 @@ PPC405-GENERIC BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> +M: Ricardo Ribalda <ricardo.ribalda@gmail.com> S: Maintained F: board/xilinx/ppc405-generic/ F: include/configs/xilinx-ppc405-generic.h diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile index c9da870657..2800f68626 100644 --- a/board/xilinx/ppc405-generic/Makefile +++ b/board/xilinx/ppc405-generic/Makefile @@ -3,10 +3,10 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com # Work supported by Qtechnology http://www.qtec.com # # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ../../xilinx/ppc405-generic/xilinx_ppc405_generic.o +obj-y += xilinx_ppc405_generic.o diff --git a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c index e3dd468f1e..3729f07624 100644 --- a/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c +++ b/board/xilinx/ppc405-generic/xilinx_ppc405_generic.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * SPDX-License-Identifier: GPL-2.0+ @@ -10,39 +10,32 @@ #include <common.h> #include <asm/processor.h> -ulong __get_PCI_freq(void) +ulong get_PCI_freq(void) { return 0; } -ulong get_PCI_freq(void) __attribute__((weak, alias("__get_PCI_freq"))); - -int __board_pre_init(void) -{ - return 0; -} -int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); - -int __checkboard(void) +int checkboard(void) { puts("Xilinx PPC405 Generic Board\n"); return 0; } -int checkboard(void) __attribute__((weak, alias("__checkboard"))); -phys_size_t __initdram(int board_type) +phys_size_t initdram(int board_type) { return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); } -phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); -void __get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { - sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; - sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; - sysInfo->freqPCI = 0; + sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sys_info->freqPCI = 0; return; } -void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info"))); + +int get_serial_clock(void){ + return XPAR_UARTNS550_0_CLOCK_FREQ_HZ; +} diff --git a/board/xilinx/ppc405-generic/xparameters.h b/board/xilinx/ppc405-generic/xparameters.h index f0ff78fca5..c3df9e5109 100644 --- a/board/xilinx/ppc405-generic/xparameters.h +++ b/board/xilinx/ppc405-generic/xparameters.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * based on xparameters-ml507.h by Xilinx * @@ -14,12 +14,11 @@ #define XPAR_IIC_EEPROM_BASEADDR 0x81600000 #define XPAR_INTC_0_BASEADDR 0x81800000 #define XPAR_SPI_0_BASEADDR 0x83400000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 #define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 #define XPAR_PLB_CLOCK_FREQ_HZ 100000000 #define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 32 #define XPAR_SPI_0_NUM_TRANSFER_BITS 8 +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 #endif diff --git a/board/xilinx/ppc440-generic/MAINTAINERS b/board/xilinx/ppc440-generic/MAINTAINERS index 2d0b11af91..0258c8204a 100644 --- a/board/xilinx/ppc440-generic/MAINTAINERS +++ b/board/xilinx/ppc440-generic/MAINTAINERS @@ -1,5 +1,5 @@ PPC440-GENERIC BOARD -M: Ricardo Ribalda <ricardo.ribalda@uam.es> +M: Ricardo Ribalda <ricardo.ribalda@gmail.com> S: Maintained F: board/xilinx/ppc440-generic/ F: include/configs/xilinx-ppc440-generic.h diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile index 0acd95d6e4..4d5f41029a 100644 --- a/board/xilinx/ppc440-generic/Makefile +++ b/board/xilinx/ppc440-generic/Makefile @@ -3,11 +3,11 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # (C) Copyright 2008 -# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es +# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com # Work supported by Qtechnology http://www.qtec.com # # SPDX-License-Identifier: GPL-2.0+ # -obj-y += ../../xilinx/ppc440-generic/xilinx_ppc440_generic.o -extra-y += ../../xilinx/ppc440-generic/init.o +obj-y += xilinx_ppc440_generic.o +extra-y += init.o diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S index 4598a37684..f9ff35f51b 100644 --- a/board/xilinx/ppc440-generic/init.S +++ b/board/xilinx/ppc440-generic/init.S @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * SPDX-License-Identifier: GPL-2.0+ diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c index 74df2f4ff7..d823352930 100644 --- a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c +++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * * SPDX-License-Identifier: GPL-2.0+ @@ -8,34 +8,51 @@ #include <config.h> #include <common.h> +#include <netdev.h> #include <asm/processor.h> -int __board_pre_init(void) -{ - return 0; -} -int board_pre_init(void) __attribute__((weak, alias("__board_pre_init"))); - -int __checkboard(void) +int checkboard(void) { puts("Xilinx PPC440 Generic Board\n"); return 0; } -int checkboard(void) __attribute__((weak, alias("__checkboard"))); -phys_size_t __initdram(int board_type) +phys_size_t initdram(int board_type) { return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR, CONFIG_SYS_SDRAM_SIZE_MB * 1024 * 1024); } -phys_size_t initdram(int) __attribute__((weak, alias("__initdram"))); -void __get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { - sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; - sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; - sysInfo->freqPCI = 0; + sys_info->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ; + sys_info->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ; + sys_info->freqPCI = 0; return; } -void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info"))); + +int get_serial_clock(void){ + return XPAR_UARTNS550_0_CLOCK_FREQ_HZ; +} + +int board_eth_init(bd_t *bis) +{ + int ret = 0; + + puts("Init xilinx temac\n"); +#ifdef XPAR_LLTEMAC_0_BASEADDR + ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_0_BASEADDR, + XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB, + XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR); + +#endif + +#ifdef XPAR_LLTEMAC_1_BASEADDR + ret |= xilinx_ll_temac_eth_init(bis, XPAR_LLTEMAC_1_BASEADDR, + XILINX_LL_TEMAC_M_SDMA_DCR | XILINX_LL_TEMAC_M_SDMA_PLB, + XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR); +#endif + + return ret; +} diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h index e30e592bbe..b45a6a1d76 100644 --- a/board/xilinx/ppc440-generic/xparameters.h +++ b/board/xilinx/ppc440-generic/xparameters.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2008 - * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es + * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@gmail.com * This work has been supported by: QTechnology http://qtec.com/ * based on xparameters-ml507.h by Xilinx * @@ -12,12 +12,15 @@ #define XPAR_DDR2_SDRAM_MEM_BASEADDR 0x00000000 #define XPAR_IIC_EEPROM_BASEADDR 0x81600000 -#define XPAR_INTC_0_BASEADDR 0x81800000 -#define XPAR_UARTLITE_0_BASEADDR 0x84000000 -#define XPAR_FLASH_MEM0_BASEADDR 0xFE000000 +#define XPAR_INTC_0_BASEADDR 0x87000000 +#define XPAR_FLASH_MEM0_BASEADDR 0xF0000000 #define XPAR_PLB_CLOCK_FREQ_HZ 100000000 #define XPAR_CORE_CLOCK_FREQ_HZ 400000000 -#define XPAR_INTC_MAX_NUM_INTR_INPUTS 13 -#define XPAR_UARTLITE_0_BAUDRATE 9600 +#define XPAR_INTC_MAX_NUM_INTR_INPUTS 32 +#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ 100000000 +#define XPAR_LLTEMAC_0_LLINK_CONNECTED_BASEADDR 0x80 +#define XPAR_LLTEMAC_1_LLINK_CONNECTED_BASEADDR 0x98 +#define XPAR_LLTEMAC_0_BASEADDR 0x83000000 +#define XPAR_LLTEMAC_1_BASEADDR 0x83000040 #endif diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 414f5302a0..01bae5d67e 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -8,7 +8,6 @@ #include <fdtdec.h> #include <fpga.h> #include <mmc.h> -#include <netdev.h> #include <zynqpl.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> @@ -94,34 +93,11 @@ int board_late_init(void) #ifdef CONFIG_DISPLAY_BOARDINFO int checkboard(void) { - puts("Board:\tXilinx Zynq\n"); + puts("Board: Xilinx Zynq\n"); return 0; } #endif -int board_eth_init(bd_t *bis) -{ - u32 ret = 0; - -#ifdef CONFIG_XILINX_AXIEMAC - ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, - XILINX_AXIDMA_BASEADDR); -#endif -#ifdef CONFIG_XILINX_EMACLITE - u32 txpp = 0; - u32 rxpp = 0; -# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG - txpp = 1; -# endif -# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG - rxpp = 1; -# endif - ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, - txpp, rxpp); -#endif - return ret; -} - int dram_init(void) { #if CONFIG_IS_ENABLED(OF_CONTROL) diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 2cf47125d4..44d347ed3b 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -9,6 +9,7 @@ #include <netdev.h> #include <ahci.h> #include <scsi.h> +#include <asm/arch/clk.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> @@ -28,10 +29,18 @@ int board_early_init_r(void) { u32 val; - val = readl(&crlapb_base->timestamp_ref_ctrl); - val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; - writel(val, &crlapb_base->timestamp_ref_ctrl); - + if (current_el() == 3) { + val = readl(&crlapb_base->timestamp_ref_ctrl); + val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; + writel(val, &crlapb_base->timestamp_ref_ctrl); + + /* Program freq register in System counter */ + writel(zynqmp_get_system_timer_freq(), + &iou_scntr_secure->base_frequency_id_register); + /* And enable system counter */ + writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, + &iou_scntr_secure->counter_control_register); + } /* Program freq register in System counter and enable system counter */ writel(gd->cpu_clk, &iou_scntr->base_frequency_id_register); writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_HDBG | @@ -48,11 +57,6 @@ int dram_init(void) return 0; } -int timer_init(void) -{ - return 0; -} - void reset_cpu(ulong addr) { } @@ -73,11 +77,36 @@ int board_late_init(void) reg = readl(&crlapb_base->boot_mode); bootmode = reg & BOOT_MODES_MASK; + puts("Bootmode: "); switch (bootmode) { - case SD_MODE: + case JTAG_MODE: + puts("JTAG_MODE\n"); + setenv("modeboot", "jtagboot"); + break; + case QSPI_MODE_24BIT: + case QSPI_MODE_32BIT: + setenv("modeboot", "qspiboot"); + puts("QSPI_MODE\n"); + break; case EMMC_MODE: + puts("EMMC_MODE\n"); + setenv("modeboot", "sdboot"); + break; + case SD_MODE: + puts("SD_MODE\n"); setenv("modeboot", "sdboot"); break; + case SD_MODE1: + puts("SD_MODE1\n"); +#if defined(CONFIG_ZYNQ_SDHCI0) && defined(CONFIG_ZYNQ_SDHCI1) + setenv("sdbootdev", "1"); +#endif + setenv("modeboot", "sdboot"); + break; + case NAND_MODE: + puts("NAND_MODE\n"); + setenv("modeboot", "nandboot"); + break; default: printf("Invalid Boot Mode:0x%x\n", bootmode); break; @@ -88,7 +117,7 @@ int board_late_init(void) int checkboard(void) { - puts("Board:\tXilinx ZynqMP\n"); + puts("Board: Xilinx ZynqMP\n"); return 0; } |