summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/freescale/mx35pdk/mx35pdk.c2
-rw-r--r--board/freescale/mx53loco/mx53loco.c84
-rw-r--r--board/freescale/mx6qsabresd/mx6qsabresd.c80
3 files changed, 140 insertions, 26 deletions
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 2aa000f238..b7f474e5ef 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -274,7 +274,7 @@ int board_late_init(void)
mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
- gpio_direction_output(37, 1);
+ gpio_direction_output(IMX_GPIO_NR(2, 5), 1);
}
val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 2c8cb7a1cc..60cd4f0cfb 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -343,14 +343,13 @@ static void setup_iomux_i2c(void)
static int power_init(void)
{
unsigned int val;
- int ret = -1;
+ int ret;
struct pmic *p;
- int retval;
if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
- retval = pmic_dialog_init(I2C_PMIC);
- if (retval)
- return retval;
+ ret = pmic_dialog_init(I2C_PMIC);
+ if (ret)
+ return ret;
p = pmic_get("DIALOG_PMIC");
if (!p)
@@ -359,20 +358,39 @@ static int power_init(void)
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
+ if (ret) {
+ printf("Writing to BUCKCORE_REG failed: %d\n", ret);
+ return ret;
+ }
- ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
+ pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
val |= DA9052_SUPPLY_VBCOREGO;
- ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val);
+ ret = pmic_reg_write(p, DA9053_SUPPLY_REG, val);
+ if (ret) {
+ printf("Writing to SUPPLY_REG failed: %d\n", ret);
+ return ret;
+ }
/* Set Vcc peripheral to 1.30V */
- ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
- ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
+ ret = pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
+ if (ret) {
+ printf("Writing to BUCKPRO_REG failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
+ if (ret) {
+ printf("Writing to SUPPLY_REG failed: %d\n", ret);
+ return ret;
+ }
+
+ return ret;
}
if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
- retval = pmic_init(I2C_PMIC);
- if (retval)
- return retval;
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
p = pmic_get("FSL_PMIC");
if (!p)
@@ -382,28 +400,50 @@ static int power_init(void)
pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708;
ret = pmic_reg_write(p, REG_SW_0, val);
+ if (ret) {
+ printf("Writing to REG_SW_0 failed: %d\n", ret);
+ return ret;
+ }
/* Set VCC as 1.30V on SW2 */
pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708;
- ret |= pmic_reg_write(p, REG_SW_1, val);
+ ret = pmic_reg_write(p, REG_SW_1, val);
+ if (ret) {
+ printf("Writing to REG_SW_1 failed: %d\n", ret);
+ return ret;
+ }
/* Set global reset timer to 4s */
pmic_reg_read(p, REG_POWER_CTL2, &val);
val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708;
- ret |= pmic_reg_write(p, REG_POWER_CTL2, val);
+ ret = pmic_reg_write(p, REG_POWER_CTL2, val);
+ if (ret) {
+ printf("Writing to REG_POWER_CTL2 failed: %d\n", ret);
+ return ret;
+ }
/* Set VUSBSEL and VUSBEN for USB PHY supply*/
pmic_reg_read(p, REG_MODE_0, &val);
val |= (VUSBSEL_MC34708 | VUSBEN_MC34708);
- ret |= pmic_reg_write(p, REG_MODE_0, val);
+ ret = pmic_reg_write(p, REG_MODE_0, val);
+ if (ret) {
+ printf("Writing to REG_MODE_0 failed: %d\n", ret);
+ return ret;
+ }
/* Set SWBST to 5V in auto mode */
val = SWBST_AUTO;
- ret |= pmic_reg_write(p, SWBST_CTRL, val);
+ ret = pmic_reg_write(p, SWBST_CTRL, val);
+ if (ret) {
+ printf("Writing to SWBST_CTRL failed: %d\n", ret);
+ return ret;
+ }
+
+ return ret;
}
- return ret;
+ return -1;
}
static void clock_1GHz(void)
@@ -462,12 +502,18 @@ int board_init(void)
mxc_set_sata_internal_clock();
setup_iomux_i2c();
+
+ lcd_enable();
+
+ return 0;
+}
+
+int board_late_init(void)
+{
if (!power_init())
clock_1GHz();
print_cpuinfo();
- lcd_enable();
-
return 0;
}
diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c
index 0240fb5479..65c4a1a4f3 100644
--- a/board/freescale/mx6qsabresd/mx6qsabresd.c
+++ b/board/freescale/mx6qsabresd/mx6qsabresd.c
@@ -86,6 +86,20 @@ static void setup_iomux_enet(void)
gpio_set_value(IMX_GPIO_NR(1, 25), 1);
}
+iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6Q_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
iomux_v3_cfg_t const usdhc3_pads[] = {
MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -100,28 +114,82 @@ iomux_v3_cfg_t const usdhc3_pads[] = {
MX6Q_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
};
+iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
}
#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
+struct fsl_esdhc_cfg usdhc_cfg[3] = {
+ {USDHC2_BASE_ADDR},
{USDHC3_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
};
+#define USDHC2_CD_GPIO IMX_GPIO_NR(2, 2)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 0)
+
int board_mmc_getcd(struct mmc *mmc)
{
- gpio_direction_input(IMX_GPIO_NR(2, 0));
- return !gpio_get_value(IMX_GPIO_NR(2, 0));
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ return !gpio_get_value(USDHC2_CD_GPIO);
+ case USDHC3_BASE_ADDR:
+ return !gpio_get_value(USDHC3_CD_GPIO);
+ default:
+ return 1; /* eMMC/uSDHC4 is always present */
+ }
}
int board_mmc_init(bd_t *bis)
{
- imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ int i;
+
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ gpio_direction_input(USDHC2_CD_GPIO);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) than supported by the board\n", i + 1);
+ return 0;
+ }
+
+ if (fsl_esdhc_initialize(bis, &usdhc_cfg[i]))
+ printf("Warning: failed to initialize mmc dev %d\n", i);
+ }
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+ return 0;
}
#endif
generated by cgit (git 2.34.1) at 2024-12-27 07:54:16 +0000