diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/ronetix/pm9261/pm9261.c | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c index 0c7b4ee415..f1e7aab629 100644 --- a/board/ronetix/pm9261/pm9261.c +++ b/board/ronetix/pm9261/pm9261.c @@ -17,9 +17,6 @@ #include <asm/arch/at91_matrix.h> #include <asm/arch/clk.h> #include <asm/arch/gpio.h> - -#include <lcd.h> -#include <atmel_lcdc.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) #include <net.h> #endif @@ -110,105 +107,6 @@ static void pm9261_dm9000_hw_init(void) } #endif -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 240, - .vl_row = 320, - .vl_clk = 4965000, - .vl_sync = ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - .vl_bpix = 3, - .vl_tft = 1, - .vl_hsync_len = 5, - .vl_left_margin = 1, - .vl_right_margin = 33, - .vl_vsync_len = 1, - .vl_upper_margin = 1, - .vl_lower_margin = 0, - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ - at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power up */ -} - -void lcd_disable(void) -{ - at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power down */ -} - -static void pm9261_lcd_hw_init(void) -{ - at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* LCDDEN */ - at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* LCDCC */ - at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* LCDD12 */ - at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTB, 19, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTB, 20, 0); /* LCDD15 */ - at91_set_b_periph(AT91_PIO_PORTB, 23, 0); /* LCDD18 */ - at91_set_b_periph(AT91_PIO_PORTB, 24, 0); /* LCDD19 */ - at91_set_b_periph(AT91_PIO_PORTB, 25, 0); /* LCDD20 */ - at91_set_b_periph(AT91_PIO_PORTB, 26, 0); /* LCDD21 */ - at91_set_b_periph(AT91_PIO_PORTB, 27, 0); /* LCDD22 */ - at91_set_b_periph(AT91_PIO_PORTB, 28, 0); /* LCDD23 */ - - at91_system_clk_enable(AT91_PMC_HCK1); - - gd->fb_base = ATMEL_BASE_SRAM; -} - -#ifdef CONFIG_LCD_INFO -#include <nand.h> -#include <version.h> - -extern flash_info_t flash_info[]; - -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size, flash_size; - int i; - char temp[32]; - - lcd_printf ("%s\n", U_BOOT_VERSION); - lcd_printf ("(C) 2009 Ronetix GmbH\n"); - lcd_printf ("support@ronetix.at\n"); - lcd_printf ("%s CPU at %s MHz", - CONFIG_SYS_AT91_CPU_NAME, - strmhz(temp, get_cpu_clk_rate())); - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += get_nand_dev_by_index(i)->size; - - flash_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) - flash_size += flash_info[i].size; - - lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n" - "%ld MB DataFlash\n", - dram_size >> 20, - nand_size >> 20, - flash_size >> 20); -} -#endif /* CONFIG_LCD_INFO */ - -#endif /* CONFIG_LCD */ - int board_early_init_f(void) { return 0; @@ -228,9 +126,6 @@ int board_init(void) #ifdef CONFIG_DRIVER_DM9000 pm9261_dm9000_hw_init(); #endif -#ifdef CONFIG_LCD - pm9261_lcd_hw_init(); -#endif return 0; } |