summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/freescale/common/fsl_diu_fb.c29
-rw-r--r--board/pdm360ng/Makefile51
-rw-r--r--board/pdm360ng/config.mk24
-rw-r--r--board/pdm360ng/pdm360ng.c650
4 files changed, 750 insertions, 4 deletions
diff --git a/board/freescale/common/fsl_diu_fb.c b/board/freescale/common/fsl_diu_fb.c
index 2fc878be8a..cbee8fe093 100644
--- a/board/freescale/common/fsl_diu_fb.c
+++ b/board/freescale/common/fsl_diu_fb.c
@@ -50,6 +50,22 @@ struct fb_videomode {
#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */
#define FB_VMODE_NONINTERLACED 0 /* non interlaced */
+/* This setting is used for the ifm pdm360ng with PRIMEVIEW PM070WL3 */
+static struct fb_videomode fsl_diu_mode_800 = {
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 31250,
+ .left_margin = 86,
+ .right_margin = 42,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 128,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
/*
* These parameters give default parameters
* for video output 1024x768,
@@ -210,9 +226,14 @@ int fsl_diu_init(int xres,
disable_lcdc();
- if (xres == 1280) {
+ switch (xres) {
+ case 800:
+ fsl_diu_mode_db = &fsl_diu_mode_800;
+ break;
+ case 1280:
fsl_diu_mode_db = &fsl_diu_mode_1280;
- } else {
+ break;
+ default:
fsl_diu_mode_db = &fsl_diu_mode_1024;
}
@@ -519,9 +540,9 @@ int fsl_diu_display_bmp(unsigned char *bmp,
b = *bitmap++;
for (k = 0; k < 8; k++) {
if (b & 0x80)
- *fb_t = palette[1];
+ *fb_t++ = palette[1];
else
- *fb_t = palette[0];
+ *fb_t++ = palette[0];
b = b << 1;
}
}
diff --git a/board/pdm360ng/Makefile b/board/pdm360ng/Makefile
new file mode 100644
index 0000000000..8513242081
--- /dev/null
+++ b/board/pdm360ng/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y := $(BOARD).o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/pdm360ng/config.mk b/board/pdm360ng/config.mk
new file mode 100644
index 0000000000..c3b07ddc16
--- /dev/null
+++ b/board/pdm360ng/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2009
+# Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xF0000000
diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c
new file mode 100644
index 0000000000..8fe5ac874e
--- /dev/null
+++ b/board/pdm360ng/pdm360ng.c
@@ -0,0 +1,650 @@
+/*
+ * (C) Copyright 2009, 2010 Wolfgang Denk <wd@denx.de>
+ *
+ * (C) Copyright 2009-2010
+ * Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/bitops.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mpc512x.h>
+#include <fdt_support.h>
+#include <flash.h>
+#ifdef CONFIG_MISC_INIT_R
+#include <i2c.h>
+#endif
+#include <serial.h>
+#include <jffs2/load_kernel.h>
+#include <mtd_node.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[];
+ulong flash_get_size (phys_addr_t base, int banknum);
+
+/* Clocks in use */
+#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
+ CLOCK_SCCR1_LPC_EN | \
+ CLOCK_SCCR1_NFC_EN | \
+ CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
+ CLOCK_SCCR1_PSCFIFO_EN | \
+ CLOCK_SCCR1_DDR_EN | \
+ CLOCK_SCCR1_FEC_EN | \
+ CLOCK_SCCR1_TPR_EN)
+
+#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \
+ CLOCK_SCCR2_SPDIF_EN | \
+ CLOCK_SCCR2_DIU_EN | \
+ CLOCK_SCCR2_I2C_EN)
+
+int board_early_init_f(void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ /*
+ * Initialize Local Window for FLASH-Bank1 access (CS1)
+ */
+ out_be32(&im->sysconf.lpcs1aw,
+ CSAW_START(CONFIG_SYS_FLASH1_BASE) |
+ CSAW_STOP(CONFIG_SYS_FLASH1_BASE, CONFIG_SYS_FLASH_SIZE)
+ );
+ out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG);
+
+ /*
+ * Local Window for MRAM access (CS2)
+ */
+ out_be32(&im->sysconf.lpcs2aw,
+ CSAW_START(CONFIG_SYS_MRAM_BASE) |
+ CSAW_STOP(CONFIG_SYS_MRAM_BASE, CONFIG_SYS_MRAM_SIZE)
+ );
+ out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
+
+ sync_law(&im->sysconf.lpcs2aw);
+
+ /*
+ * Configure Flash Speed
+ */
+ out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
+ out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
+
+ /*
+ * Enable clocks
+ */
+ out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN);
+ out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN);
+#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
+ setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
+#endif
+
+ return 0;
+}
+
+sdram_conf_t mddrc_config[] = {
+ {
+ (512 << 20), /* 512 MB RAM configuration */
+ {
+ CONFIG_SYS_MDDRC_SYS_CFG,
+ CONFIG_SYS_MDDRC_TIME_CFG0,
+ CONFIG_SYS_MDDRC_TIME_CFG1,
+ CONFIG_SYS_MDDRC_TIME_CFG2
+ }
+ },
+ {
+ (128 << 20), /* 128 MB RAM configuration */
+ {
+ CONFIG_SYS_MDDRC_SYS_CFG_ALT1,
+ CONFIG_SYS_MDDRC_TIME_CFG0_ALT1,
+ CONFIG_SYS_MDDRC_TIME_CFG1_ALT1,
+ CONFIG_SYS_MDDRC_TIME_CFG2_ALT1
+ }
+ },
+};
+
+phys_size_t initdram (int board_type)
+{
+ int i;
+ u32 msize = 0;
+ u32 pdm360ng_init_seq[] = {
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_MICRON_INIT_DEV_OP,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_EM2,
+ CONFIG_SYS_DDRCMD_NOP,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_EM2,
+ CONFIG_SYS_DDRCMD_EM3,
+ CONFIG_SYS_DDRCMD_EN_DLL,
+ CONFIG_SYS_DDRCMD_RES_DLL,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_DDRCMD_RFSH,
+ CONFIG_SYS_MICRON_INIT_DEV_OP,
+ CONFIG_SYS_DDRCMD_OCD_DEFAULT,
+ CONFIG_SYS_DDRCMD_OCD_EXIT,
+ CONFIG_SYS_DDRCMD_PCHG_ALL,
+ CONFIG_SYS_DDRCMD_NOP
+ };
+
+ for (i = 0; i < ARRAY_SIZE(mddrc_config); i++) {
+ msize = fixed_sdram(&mddrc_config[i].cfg, pdm360ng_init_seq,
+ ARRAY_SIZE(pdm360ng_init_seq));
+ if (msize == mddrc_config[i].size)
+ break;
+ }
+
+ return msize;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static int set_lcd_brightness(char *);
+#endif
+
+int misc_init_r(void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ /*
+ * Re-configure flash setup using auto-detected info
+ */
+ if (flash_info[1].size > 0) {
+ out_be32(&im->sysconf.lpcs1aw,
+ CSAW_START(gd->bd->bi_flashstart + flash_info[1].size) |
+ CSAW_STOP(gd->bd->bi_flashstart + flash_info[1].size,
+ flash_info[1].size));
+ sync_law(&im->sysconf.lpcs1aw);
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size (gd->bd->bi_flashstart + flash_info[1].size, 1);
+ } else {
+ /* Disable Bank 1 */
+ out_be32(&im->sysconf.lpcs1aw, 0x01000100);
+ sync_law(&im->sysconf.lpcs1aw);
+ }
+
+ out_be32(&im->sysconf.lpcs0aw,
+ CSAW_START(gd->bd->bi_flashstart) |
+ CSAW_STOP(gd->bd->bi_flashstart, flash_info[0].size));
+ sync_law(&im->sysconf.lpcs0aw);
+
+ /*
+ * Re-check to get correct base address
+ */
+ flash_get_size (gd->bd->bi_flashstart, 0);
+
+ /*
+ * Re-do flash protection upon new addresses
+ */
+ flash_protect (FLAG_PROTECT_CLEAR,
+ gd->bd->bi_flashstart, 0xffffffff,
+ &flash_info[0]);
+
+ /* Monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
+ &flash_info[0]);
+
+ /* Environment protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+#ifdef CONFIG_ENV_ADDR_REDUND
+ /* Redundant environment protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CONFIG_ENV_ADDR_REDUND,
+ CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+#ifdef CONFIG_FSL_DIU_FB
+# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
+ mpc5121_diu_init();
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+ set_lcd_brightness(0);
+#endif
+ /* Switch LCD-Backlight and LVDS-Interface on */
+ setbits_be32(&im->gpio.gpdir, 0x01040000);
+ clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000);
+#endif
+
+#if defined(CONFIG_HARD_I2C)
+ if (!getenv("ethaddr")) {
+ uchar buf[6];
+ uchar ifm_oui[3] = { 0, 2, 1, };
+ int ret;
+
+ /* I2C-0 for on-board eeprom */
+ i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS_NUM);
+
+ /* Read ethaddr from EEPROM */
+ ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
+ CONFIG_SYS_I2C_EEPROM_MAC_OFFSET, 1, buf, 6);
+ if (ret != 0) {
+ printf("Error: Unable to read MAC from I2C"
+ " EEPROM at address %02X:%02X\n",
+ CONFIG_SYS_I2C_EEPROM_ADDR,
+ CONFIG_SYS_I2C_EEPROM_MAC_OFFSET);
+ return 1;
+ }
+
+ /* Owned by IFM ? */
+ if (memcmp(buf, ifm_oui, sizeof(ifm_oui))) {
+ printf("Illegal MAC address in EEPROM: %pM\n", buf);
+ return 1;
+ }
+
+ eth_setenv_enetaddr("ethaddr", buf);
+ }
+#endif /* defined(CONFIG_HARD_I2C) */
+
+ return 0;
+}
+
+static iopin_t ioregs_init[] = {
+ /* FUNC1=LPC_CS4 */
+ {
+ offsetof(struct ioctrl512x, io_control_pata_ce1), 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) |
+ IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC3=GPIO10 */
+ {
+ offsetof(struct ioctrl512x, io_control_pata_ce2), 1, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC1=CAN3_TX */
+ {
+ offsetof(struct ioctrl512x, io_control_pata_isolate), 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=GPIO14 */
+ {
+ offsetof(struct ioctrl512x, io_control_pata_iochrdy), 1, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC2=DIU_LD22 Sets Next 2 to DIU_LD pads */
+ /* DIU_LD22-DIU_LD23 */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_ad31), 2, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC2=USB1_DATA7 Sets Next 12 to USB1 pads */
+ /* USB1_DATA7-USB1_DATA0, USB1_STOP, USB1_NEXT, USB1_CLK, USB1_DIR */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_ad29), 12, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC1=VIU_DATA0 Sets Next 3 to VIU_DATA pads */
+ /* VIU_DATA0-VIU_DATA2 */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_ad17), 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC2=FEC_TXD_0 */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_ad14), 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC1=VIU_DATA3 Sets Next 2 to VIU_DATA pads */
+ /* VIU_DATA3, VIU_DATA4 */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_ad13), 2, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC2=FEC_RXD_1 Sets Next 12 to FEC pads */
+ /* FEC_RXD_1, FEC_RXD_0, FEC_RX_CLK, FEC_TX_CLK, FEC_RX_ER, FEC_RX_DV */
+ /* FEC_TX_EN, FEC_TX_ER, FEC_CRS, FEC_MDC, FEC_MDIO, FEC_COL */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_ad11), 12, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC2=DIU_LD03 Sets Next 25 to DIU pads */
+ /* DIU_LD00-DIU_LD21 */
+ {
+ offsetof(struct ioctrl512x, io_control_pci_cbe0), 22, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1)
+ },
+ /* FUNC2=DIU_CLK Sets Next 3 to DIU pads */
+ /* DIU_CLK, DIU_VSYNC, DIU_HSYNC */
+ {
+ offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC2=CAN3_RX */
+ {
+ offsetof(struct ioctrl512x, io_control_irq1), 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* Sets lowest slew on 2 CAN_TX Pins*/
+ {
+ offsetof(struct ioctrl512x, io_control_can1_tx), 2, 0,
+ IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=CAN4_TX Sets Next 2 to CAN4 pads */
+ /* CAN4_TX, CAN4_RX */
+ {
+ offsetof(struct ioctrl512x, io_control_j1850_tx), 2, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=GPIO8 Sets Next 2 to GPIO pads */
+ /* GPIO8, GPIO9 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc0_0), 2, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC1=FEC_TXD_1 Sets Next 3 to FEC pads */
+ /* FEC_TXD_1, FEC_TXD_2, FEC_TXD_3 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc0_4), 3, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=FEC_RXD_3 Sets Next 2 to FEC pads */
+ /* FEC_RXD_3, FEC_RXD_2 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc1_4), 2, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC3=GPIO17 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc2_1), 1, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=GPIO2/GPT2 Sets Next 3 to GPIO pads */
+ /* GPIO2, GPIO20, GPIO21 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc2_4), 3, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC2=VIU_PIX_CLK */
+ {
+ offsetof(struct ioctrl512x, io_control_psc3_4), 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC3=GPIO24 Sets Next 2 to GPIO pads */
+ /* GPIO24, GPIO25 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc4_0), 2, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC1=NFC_CE2 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc4_4), 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) |
+ IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC2=VIU_DATA5 Sets Next 5 to VIU_DATA pads */
+ /* VIU_DATA5-VIU_DATA9 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc5_0), 5, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=LPC_TSIZ1 Sets Next 2 to LPC_TSIZ pads */
+ /* LPC_TSIZ1-LPC_TSIZ2 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc6_0), 2, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC1=LPC_TS */
+ {
+ offsetof(struct ioctrl512x, io_control_psc6_4), 1, 0,
+ IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ },
+ /* FUNC3=GPIO16 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc7_0), 1, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=GPIO18 Sets Next 3 to GPIO pads */
+ /* GPIO18-GPIO19, GPT7/GPIO7 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc7_2), 3, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=GPIO0/GPT0 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc8_4), 1, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC3=GPIO11 Sets Next 4 to GPIO pads */
+ /* GPIO11, GPIO2, GPIO12, GPIO13 */
+ {
+ offsetof(struct ioctrl512x, io_control_psc10_3), 4, 0,
+ IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0)
+ },
+ /* FUNC2=DIU_DE */
+ {
+ offsetof(struct ioctrl512x, io_control_psc11_4), 1, 0,
+ IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
+ IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
+ }
+};
+
+int checkboard (void)
+{
+ volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+
+ puts("Board: PDM360NG\n");
+
+ /* initialize function mux & slew rate IO inter alia on IO Pins */
+
+ iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
+
+ /* initialize IO_CONTROL_GP (GPIO/GPT-mux-register) */
+ setbits_be32(&im->io_ctrl.io_control_gp,
+ (1 << 0) | /* GP_MUX7->GPIO7 */
+ (1 << 5)); /* GP_MUX2->GPIO2 */
+
+ /* configure GPIO24 (VIU_CE), output/high */
+ setbits_be32(&im->gpio.gpdir, 0x80);
+ setbits_be32(&im->gpio.gpdat, 0x80);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+struct node_info nodes[] = {
+ { "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, },
+ { "cfi-flash", MTD_DEV_TYPE_NOR, },
+};
+#endif
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ u32 val[8];
+ int rc, i = 0;
+
+ ft_cpu_setup(blob, bd);
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+#ifdef CONFIG_FDT_FIXUP_PARTITIONS
+ fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
+#endif
+
+ /* Fixup NOR FLASH mapping */
+ val[i++] = 0; /* chip select number */
+ val[i++] = 0; /* always 0 */
+ val[i++] = gd->bd->bi_flashstart;
+ val[i++] = gd->bd->bi_flashsize;
+
+ /* Fixup MRAM mapping */
+ val[i++] = 2; /* chip select number */
+ val[i++] = 0; /* always 0 */
+ val[i++] = CONFIG_SYS_MRAM_BASE;
+ val[i++] = CONFIG_SYS_MRAM_SIZE;
+
+ rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
+ val, i * sizeof(u32), 1);
+ if (rc)
+ printf("Unable to update localbus ranges, err=%s\n",
+ fdt_strerror(rc));
+
+ /* Fixup reg property in NOR Flash node */
+ i = 0;
+ val[i++] = 0; /* always 0 */
+ val[i++] = 0; /* start at offset 0 */
+ val[i++] = flash_info[0].size; /* size of Bank 0 */
+
+ /* Second Bank available? */
+ if (flash_info[1].size > 0) {
+ val[i++] = 0; /* always 0 */
+ val[i++] = flash_info[0].size; /* offset of Bank 1 */
+ val[i++] = flash_info[1].size; /* size of Bank 1 */
+ }
+
+ rc = fdt_find_and_setprop(blob, "/localbus/flash", "reg",
+ val, i * sizeof(u32), 1);
+ if (rc)
+ printf("Unable to update flash reg property, err=%s\n",
+ fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_SERIAL_MULTI)
+/*
+ * If argument is NULL, set the LCD brightness to the
+ * value from "brightness" environment variable. Set
+ * the LCD brightness to the value specified by the
+ * argument otherwise. Default brightness is zero.
+ */
+#define MAX_BRIGHTNESS 99
+static int set_lcd_brightness(char *brightness)
+{
+ struct stdio_dev *cop_port;
+ char *env;
+ char cmd_buf[20];
+ int val = 0;
+ int cs = 0;
+ int len, i;
+
+ if (brightness) {
+ val = simple_strtol(brightness, NULL, 10);
+ } else {
+ env = getenv("brightness");
+ if (env)
+ val = simple_strtol(env, NULL, 10);
+ }
+
+ if (val < 0)
+ val = 0;
+
+ if (val > MAX_BRIGHTNESS)
+ val = MAX_BRIGHTNESS;
+
+ sprintf(cmd_buf, "$SB;%04d;", val);
+
+ len = strlen(cmd_buf);
+ for (i = 1; i <= len; i++)
+ cs += cmd_buf[i];
+
+ cs = (~cs + 1) & 0xff;
+ sprintf(cmd_buf + len, "%02X\n", cs);
+
+ /* IO Coprocessor communication */
+ cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE);
+ if (!cop_port) {
+ printf("Error: Can't open IO Coprocessor port.\n");
+ return -1;
+ }
+
+ debug("%s: cmd: %s", __func__, cmd_buf);
+ write_port(cop_port, cmd_buf);
+ /*
+ * Wait for transmission and maybe response data
+ * before closing the port.
+ */
+ udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY);
+ memset(cmd_buf, 0, sizeof(cmd_buf));
+ len = read_port(cop_port, cmd_buf, sizeof(cmd_buf));
+ if (len)
+ printf("Error: %s\n", cmd_buf);
+
+ close_port(4);
+
+ return 0;
+}
+
+static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag,
+ int argc, char *argv[])
+{
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ return set_lcd_brightness(argv[1]);
+}
+
+U_BOOT_CMD(lcdbr, 2, 1, cmd_lcd_brightness,
+ "set LCD brightness",
+ "<brightness> - set LCD backlight level to <brightness>.\n"
+);
+#endif /* CONFIG_SERIAL_MULTI */
generated by cgit (git 2.34.1) at 2024-12-25 19:42:37 +0000