diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/st/stih410-b2260/board.c | 2 | ||||
| -rw-r--r-- | board/wandboard/wandboard.c | 19 |
2 files changed, 15 insertions, 6 deletions
diff --git a/board/st/stih410-b2260/board.c b/board/st/stih410-b2260/board.c index b4fc8f3ce1..111e64b995 100644 --- a/board/st/stih410-b2260/board.c +++ b/board/st/stih410-b2260/board.c @@ -26,7 +26,7 @@ int dram_init_banksize(void) return 0; } -#ifndef CONFIG_SYS_DCACHE_OFF +#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) void enable_caches(void) { /* Enable D-cache. I-cache is already enabled in start.S */ diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index 69fbc8b690..9d7a94ff9d 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -46,6 +46,15 @@ DECLARE_GLOBAL_DATA_PTR; #define ETH_PHY_AR8035_POWER IMX_GPIO_NR(7, 13) #define REV_DETECTION IMX_GPIO_NR(2, 28) +/* Speed defined in Kconfig is only applicable when not using DM_I2C. */ +#ifdef CONFIG_DM_I2C +#define I2C1_SPEED_NON_DM 0 +#define I2C2_SPEED_NON_DM 0 +#else +#define I2C1_SPEED_NON_DM CONFIG_SYS_MXC_I2C1_SPEED +#define I2C2_SPEED_NON_DM CONFIG_SYS_MXC_I2C2_SPEED +#endif + static bool with_pmic; int dram_init(void) @@ -463,13 +472,13 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; #if defined(CONFIG_VIDEO_IPUV3) - setup_i2c(1, CONFIG_SYS_MXC_I2C1_SPEED, 0x7f, &mx6dl_i2c2_pad_info); + setup_i2c(1, I2C1_SPEED_NON_DM, 0x7f, &mx6dl_i2c2_pad_info); if (is_mx6dq() || is_mx6dqp()) { - setup_i2c(1, CONFIG_SYS_MXC_I2C1_SPEED, 0x7f, &mx6q_i2c2_pad_info); - setup_i2c(2, CONFIG_SYS_MXC_I2C2_SPEED, 0x7f, &mx6q_i2c3_pad_info); + setup_i2c(1, I2C1_SPEED_NON_DM, 0x7f, &mx6q_i2c2_pad_info); + setup_i2c(2, I2C2_SPEED_NON_DM, 0x7f, &mx6q_i2c3_pad_info); } else { - setup_i2c(1, CONFIG_SYS_MXC_I2C1_SPEED, 0x7f, &mx6dl_i2c2_pad_info); - setup_i2c(2, CONFIG_SYS_MXC_I2C2_SPEED, 0x7f, &mx6dl_i2c3_pad_info); + setup_i2c(1, I2C1_SPEED_NON_DM, 0x7f, &mx6dl_i2c2_pad_info); + setup_i2c(2, I2C2_SPEED_NON_DM, 0x7f, &mx6dl_i2c3_pad_info); } setup_display(); |