diff options
Diffstat (limited to 'configs/s5p4418_nanopi2_defconfig')
| -rw-r--r-- | configs/s5p4418_nanopi2_defconfig | 160 |
1 files changed, 34 insertions, 126 deletions
diff --git a/configs/s5p4418_nanopi2_defconfig b/configs/s5p4418_nanopi2_defconfig index c1cd08abf6..96a5c66837 100644 --- a/configs/s5p4418_nanopi2_defconfig +++ b/configs/s5p4418_nanopi2_defconfig @@ -1,147 +1,55 @@ CONFIG_ARM=y +CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_NEXELL=y -CONFIG_ARCH_S5P4418=y +CONFIG_SYS_TEXT_BASE=0x74C00000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_OFFSET=0x2E0200 +CONFIG_DM_GPIO=y CONFIG_TARGET_NANOPI2=y +CONFIG_S5P4418_ONEWIRE=y +CONFIG_ROOT_DEV=1 +CONFIG_BOOT_PART=1 +CONFIG_ROOT_PART=2 CONFIG_DEFAULT_DEVICE_TREE="s5p4418-nanopi2" CONFIG_FIT=y - +CONFIG_FIT_BEST_MATCH=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_BOOTDELAY=1 +CONFIG_SUPPORT_RAW_INITRD=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_ARCH_MISC_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_MEMTEST=y CONFIG_SYS_MEMTEST_START=0x71000000 CONFIG_SYS_MEMTEST_END=0xb0000000 - -CONFIG_CMD_MEMTEST=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -# CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y # CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set - -# Default is CONFIG_NET=y, in this case: -# Loading Environment from MMC... ## Warning: Unknown environment variable type 'm' -# OK -# CONFIG_CMD_NET=y must be set to avoid this Warning. But then: -# Net: Net Initialization Skipped -# No ethernet found. -# If CONFIG_NET=n is set additionally warning at "make s5p4418_nanopi2_defconfig": -# arch/../configs/s5p4418_nanopi2_defconfig:24:warning: override: reassigning to symbol CMD_NET -# -# --> CONFIG_NET=n set only -CONFIG_NET=n - -# CONFIG_CMD_NFS is not set -CONFIG_CMD_FDISK=y -CONFIG_CMD_EXT4_IMG_WRITE=y -CONFIG_CMD_SD_RECOVERY=y +CONFIG_CMD_BMP=y CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y - -CONFIG_PINCTRL=y -CONFIG_DM_GPIO=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_MMC_ENV_DEV=2 +# CONFIG_NET is not set CONFIG_DM_I2C=y CONFIG_SYS_I2C_NEXELL=y +CONFIG_DM_MMC=y +CONFIG_MMC_DW=y +CONFIG_PINCTRL=y CONFIG_DM_PMIC=y -CONFIG_DM_PMIC_AXP228=y CONFIG_DM_REGULATOR=y -CONFIG_DM_REGULATOR_AXP228=y -CONFIG_DM_PWM=n - -CONFIG_DISPLAY=y +CONFIG_CONS_INDEX=0 CONFIG_DM_VIDEO=y -CONFIG_SYS_CONSOLE_BG_COL=0xff -CONFIG_SYS_CONSOLE_FG_COL=0x00 +CONFIG_DISPLAY=y CONFIG_VIDEO_NX=y CONFIG_VIDEO_NX_RGB=y CONFIG_VIDEO_NX_LVDS=y CONFIG_VIDEO_NX_HDMI=y -CONFIG_CMD_BMP=y - -## LCD backlight control -CONFIG_S5P4418_ONEWIRE=y -CONFIG_PWM_NX is not set - -CONFIG_REGEX=y CONFIG_ERRNO_STR=y - -CONFIG_SYS_TEXT_BASE=0x74C00000 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_SYS_CACHELINE_SIZE=64 - -## System initialize options (board_init_f) -# board_init_f->init_sequence, call board_early_init_f -CONFIG_BOARD_LATE_INIT=y -# board_init_f->init_sequence, call print_cpuinfo -CONFIG_DISPLAY_CPUINFO=y -# board_init_f->init_sequence, call show_board_info -CONFIG_DISPLAY_BOARDINFO=y -# board_init_f, CONFIG_SYS_ICACHE_OFF -CONFIG_SYS_DCACHE_OFF=y -# board_init_r, call arch_misc_init -CONFIG_ARCH_MISC_INIT=y - -CONFIG_BOOTDELAY=1 -CONFIG_ZERO_BOOTDELAY_CHECK=y - -## U-Boot Environments -## refer to common/env_common.c - -# CONFIG_ENV_IS_IN_MMC must be set here and not in s5p4418_nanopi2.h -# otherwise CONFIG_ENV_IS_NOWHERE is set by env/Kconfig and environment -# (bootargs) are not loaded -CONFIG_ENV_IS_IN_MMC=y -CONFIG_ENV_OFFSET=0x2E0200 -CONFIG_ENV_SIZE=0x4000 -CONFIG_CMD_SAVEENV=y - -## Etc Command definition -# image info -CONFIG_CMD_IMI=y -# add command line history -CONFIG_CMDLINE_EDITING=y -CONFIG_CMDLINE_TAG=y -CONFIG_INITRD_TAG=y -CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_REVISION_TAG=y -CONFIG_CMD_BOOTZ=y - -## serial console configuration -CONFIG_CONS_INDEX=0 -CONFIG_BAUDRATE=115200 - -## SD/MMC -CONFIG_BOUNCE_BUFFER=y -CONFIG_GENERIC_MMC=y -CONFIG_MMC=y -CONFIG_MMC_DW=y -CONFIG_NEXELL_DWMMC=y -CONFIG_CMD_MMC=y -CONFIG_DM_MMC=y - -CONFIG_DOS_PARTITION=y -CONFIG_CMD_FAT=y -CONFIG_FS_FAT=y -CONFIG_FAT_WRITE=y - -CONFIG_CMD_EXT4=y -CONFIG_CMD_EXT4_WRITE=y -CONFIG_FS_EXT4=y -CONFIG_EXT4_WRITE=y - -## OF_CONTROL -CONFIG_FIT_BEST_MATCH=y -CONFIG_OF_LIBFDT=y -CONFIG_OF_BOARD_SETUP=y - -## BOOTCOMMAND -CONFIG_ROOT_DEV=1 -CONFIG_BOOT_PART=1 -CONFIG_ROOT_PART=2 - -# necessary for if-cmd -CONFIG_HUSH_PARSER=y - -# set to 'n' to save memory -CONFIG_SYS_LONGHELP=y - -# For debugging (trace) of MMC-CMDs -CONFIG_MMC_TRACE=n |