diff options
Diffstat (limited to 'cpu/mcf52x2/start.S')
| -rw-r--r-- | cpu/mcf52x2/start.S | 133 |
1 files changed, 114 insertions, 19 deletions
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index b4926e2376..8a83ca5ef7 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -55,7 +55,15 @@ */ _vectors: -.long 0x00000000, _START +.long 0x00000000 /* Flash offset is 0 until we setup CS0 */ +#if defined(CONFIG_R5200) +.long 0x400 +#elif defined(CONFIG_M5282) +.long _start - TEXT_BASE +#else +.long _START +#endif + .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT @@ -96,20 +104,23 @@ _vectors: .text + +#if defined(CFG_INT_FLASH_BASE) && \ + (defined(CONFIG_M5282) || defined(CONFIG_M5281)) + #if (TEXT_BASE == CFG_INT_FLASH_BASE) + .long 0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */ + .long 0xFFFFFFFF /* all sectors protected */ + .long 0x00000000 /* supervisor/User restriction */ + .long 0x00000000 /* programm/data space restriction */ + .long 0x00000000 /* Flash security */ + #endif +#endif .globl _start _start: nop nop move.w #0x2700,%sr - /* if we come from a pre-loader we have no exception table and - * therefore no VBR to set - */ -#if !defined(CONFIG_MONITOR_IS_IN_RAM) - move.l #CFG_FLASH_BASE, %d0 - movec %d0, %VBR -#endif - #if defined(CONFIG_M5272) || defined(CONFIG_M5249) move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR @@ -124,26 +135,70 @@ _start: movec %d0, %RAMBAR0 #endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */ -#ifdef CONFIG_M5282 +#if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* Initialize IPSBAR */ move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ move.l %d0, 0x40000000 + /* Initialize RAMBAR1: locate SRAM and validate it */ + move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 + movec %d0, %RAMBAR1 + +#if (TEXT_BASE == CFG_INT_FLASH_BASE) + /* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */ + + move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0 + move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1 + move.l #(CFG_INIT_RAM_ADDR), %a2 +_copy_flash: + move.l (%a0)+, (%a2)+ + cmp.l %a0, %a1 + bgt.s _copy_flash + jmp CFG_INIT_RAM_ADDR + +_flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 movec %d0, %RAMBAR0 + jmp _after_flashbar_copy.L /* Force jump to absolute address */ +_flashbar_setup_end: + nop +_after_flashbar_copy: +#else + /* Setup code to initialize FLASHBAR, if start from external Memory */ + move.l #(CFG_INT_FLASH_BASE + 0x21), %d0 + movec %d0, %RAMBAR0 +#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ - /* Initialize RAMBAR1: locate SRAM and validate it */ - move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 - movec %d0, %RAMBAR1 +#endif + /* if we come from a pre-loader we have no exception table and + * therefore no VBR to set + */ +#if !defined(CONFIG_MONITOR_IS_IN_RAM) + move.l #CFG_FLASH_BASE, %d0 + movec %d0, %VBR #endif +#ifdef CONFIG_R5200 + move.l #(_flash_setup-CFG_FLASH_BASE), %a0 + move.l #(_flash_setup_end-CFG_FLASH_BASE), %a1 + move.l #(CFG_INIT_RAM_ADDR), %a2 +_copy_flash: + move.l (%a0)+, (%a2)+ + cmp.l %a0, %a1 + bgt.s _copy_flash + jmp CFG_INIT_RAM_ADDR +_after_flash_copy: +#endif + +#if 0 /* invalidate and disable cache */ move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 movec %d0, %ACR1 +#endif /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp @@ -154,10 +209,28 @@ _start: bsr cpu_init_f /* run low-level CPU init code (from flash) */ bsr board_init_f /* run low-level board init code (from flash) */ - /* board_init_f() does not return + /* board_init_f() does not return */ /*------------------------------------------------------------------------------*/ +#ifdef CONFIG_R5200 +_flash_setup: + /* CSAR0 */ + move.l #((CFG_FLASH_BASE & 0xffff0000) >> 16), %d0 + move.w %d0, 0x40000080 + + /* CSCR0 */ + move.l #0x2180, %d0 /* 8 wait states, 16bit port, auto ack, */ + move.w %d0, 0x4000008A + + /* CSMR0 */ + move.l #0x001f0001, %d0 /* 2 MB, valid */ + move.l %d0, 0x40000084 + + jmp _after_flash_copy.L +_flash_setup_end: +#endif + /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -180,7 +253,6 @@ relocate_code: move.l #CFG_MONITOR_BASE, %a1 move.l #__init_end, %a2 move.l %a0, %a3 - /* copy the code to RAM */ 1: move.l (%a1)+, (%a3)+ @@ -191,14 +263,14 @@ relocate_code: * We are done. Do not return, instead branch to second part of board * initialization, now running from RAM. */ - move.l %a0, %a1 + move.l %a0, %a1 add.l #(in_ram - CFG_MONITOR_BASE), %a1 jmp (%a1) in_ram: clear_bss: - /* + /* * Now clear BSS segment */ move.l %a0, %a1 @@ -228,6 +300,23 @@ clear_bss: cmp.l %a2, %a1 bne 7b +#if defined(CONFIG_M5281) || defined(CONFIG_M5282) + /* patch the 3 accesspoints to 3 ichache_state */ + /* quick and dirty */ + + move.l %a0,%d1 + add.l #(icache_state - CFG_MONITOR_BASE),%d1 + move.l %a0,%a1 + add.l #(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1 + move.l %d1,(%a1) + move.l %a0,%a1 + add.l #(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1 + move.l %d1,(%a1) + move.l %a0,%a1 + add.l #(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1 + move.l %d1,(%a1) +#endif + /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 add.l #(board_init_r - CFG_MONITOR_BASE), %a1 @@ -235,6 +324,10 @@ clear_bss: /* set parameters for board_init_r */ move.l %a0,-(%sp) /* dest_addr */ move.l %d0,-(%sp) /* gd */ + #if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ + defined(CFG_HALT_BEFOR_RAM_JUMP) + halt + #endif jsr (%a1) /*------------------------------------------------------------------------------*/ @@ -289,6 +382,7 @@ icache_enable: move.l #0x80400100, %d0 /* Setup cache mask, data cache disabel*/ movec %d0, %CACR /* Enable cache */ moveq #1, %d0 +icache_state_access_1: move.l %d0, icache_state rts #endif @@ -323,18 +417,19 @@ icache_disable: movec %d0, %ACR0 /* Enable cache */ movec %d0, %ACR1 /* Enable cache */ moveq #0, %d0 +icache_state_access_2: move.l %d0, icache_state rts .globl icache_status icache_status: +icache_state_access_3: move.l icache_state, %d0 rts .data icache_state: - .long 1 - + .long 0 /* cache is diabled on inirialization */ /*------------------------------------------------------------------------------*/ |