summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/44x_spd_ddr2.c
diff options
context:
space:
mode:
Diffstat (limited to 'cpu/ppc4xx/44x_spd_ddr2.c')
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c129
1 files changed, 81 insertions, 48 deletions
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 83c991116f..abb5e41aaa 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -107,10 +107,11 @@
#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
/* Defines for the Read Cycle Delay test */
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define NUMLOOPS 256 /* memory test loops */
-#define CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
+#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
@@ -584,10 +585,16 @@ static void get_spd_info(unsigned long *dimm_populated,
#ifdef CONFIG_ADD_RAM_INFO
void board_add_ram_info(int use_default)
{
+ u32 val;
+
if (is_ecc_enabled())
- puts(" (ECC enabled)");
+ puts(" (ECC enabled, ");
else
- puts(" (ECC not enabled)");
+ puts(" (ECC not enabled, ");
+
+ mfsdram(SDRAM_MMODE, val);
+ val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
+ printf("CL=%d)", val);
}
#endif
@@ -731,6 +738,7 @@ static void check_frequency(unsigned long *dimm_populated,
else
cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
((tcyc_reg & 0x0F)*10);
+ debug("cycle_time=%d [10 picoseconds]\n", cycle_time);
if (cycle_time > (calc_cycle_time + 10)) {
/*
@@ -1486,6 +1494,9 @@ static void program_mode(unsigned long *dimm_populated,
hang();
}
} else { /* DDR2 */
+ debug("cas_3_0_available=%d\n", cas_3_0_available);
+ debug("cas_4_0_available=%d\n", cas_4_0_available);
+ debug("cas_5_0_available=%d\n", cas_5_0_available);
if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
*selected_cas = DDR_CAS_3;
@@ -2137,6 +2148,18 @@ static unsigned long is_ecc_enabled(void)
return ecc;
}
+static void blank_string(int size)
+{
+ int i;
+
+ for (i=0; i<size; i++)
+ putc('\b');
+ for (i=0; i<size; i++)
+ putc(' ');
+ for (i=0; i<size; i++)
+ putc('\b');
+}
+
#ifdef CONFIG_DDR_ECC
/*-----------------------------------------------------------------------------+
* program_ecc.
@@ -2233,8 +2256,10 @@ static void program_ecc_addr(unsigned long start_address,
unsigned long end_address;
unsigned long address_increment;
unsigned long mcopt1;
- char str[] = "ECC generation...";
- int i;
+ char str[] = "ECC generation -";
+ char slash[] = "\\|/-\\|/-";
+ int loop = 0;
+ int loopi = 0;
current_address = start_address;
mfsdram(SDRAM_MCOPT1, mcopt1);
@@ -2257,14 +2282,20 @@ static void program_ecc_addr(unsigned long start_address,
while (current_address < end_address) {
*((unsigned long *)current_address) = 0x00000000;
current_address += address_increment;
+
+ if ((loop++ % (2 << 20)) == 0) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+ }
}
+
} else {
/* ECC bit set method for cached memory */
dcbz_area(start_address, num_bytes);
dflush();
}
- for (i=0; i<strlen(str); i++)
- putc('\b');
+
+ blank_string(strlen(str));
sync();
eieio();
@@ -2347,7 +2378,7 @@ static void program_DQS_calibration(unsigned long *dimm_populated,
#endif
}
-static u32 short_mem_test(void)
+static int short_mem_test(void)
{
u32 *membase;
u32 bxcr_num;
@@ -2371,42 +2402,41 @@ static u32 short_mem_test(void)
0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
{0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+ int l;
for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
/* Banks enabled */
if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-
/* Bank is enabled */
- membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
/*------------------------------------------------------------------
* Run the short memory test.
*-----------------------------------------------------------------*/
+ membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+
for (i = 0; i < NUMMEMTESTS; i++) {
for (j = 0; j < NUMMEMWORDS; j++) {
membase[j] = test[i][j];
ppcDcbf((u32)&(membase[j]));
}
sync();
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
+ for (l=0; l<NUMLOOPS; l++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ return 0;
+ }
ppcDcbf((u32)&(membase[j]));
- break;
}
- ppcDcbf((u32)&(membase[j]));
+ sync();
}
- sync();
- if (j < NUMMEMWORDS)
- break;
}
- if (i < NUMMEMTESTS)
- break;
} /* if bank enabled */
} /* for bxcf_num */
- return bxcr_num;
+ return 1;
}
#ifndef HARD_CODED_DQS
@@ -2415,12 +2445,10 @@ static u32 short_mem_test(void)
*-----------------------------------------------------------------------------*/
static void DQS_calibration_process(void)
{
- unsigned long ecc_temp;
unsigned long rfdc_reg;
unsigned long rffd;
unsigned long rqdc_reg;
unsigned long rqfd;
- unsigned long bxcr_num;
unsigned long val;
long rqfd_average;
long rffd_average;
@@ -2440,6 +2468,10 @@ static void DQS_calibration_process(void)
long max_end;
unsigned char fail_found;
unsigned char pass_found;
+ u32 rqfd_start;
+ char str[] = "Auto calibration -";
+ char slash[] = "\\|/-\\|/-";
+ int loopi = 0;
/*------------------------------------------------------------------
* Test to determine the best read clock delay tuning bits.
@@ -2464,11 +2496,16 @@ static void DQS_calibration_process(void)
* we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
* from experimentation it is safe to say you will always have a failure.
*-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, ecc_temp);
- ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
- mfsdram(SDRAM_MCOPT1, val);
- mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
- SDRAM_MCOPT1_MCHK_NON);
+
+ /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
+ rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */
+
+ puts(str);
+
+calibration_loop:
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
max_start = 0;
min_end = 0;
@@ -2492,9 +2529,6 @@ static void DQS_calibration_process(void)
fail_found = FALSE;
pass_found = FALSE;
- /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
- /* rqdc_reg = mfsdram(SDRAM_RQDC) & ~(SDRAM_RQDC_RQFD_MASK); */
-
/*
* get the delay line calibration register value
*/
@@ -2510,13 +2544,10 @@ static void DQS_calibration_process(void)
*-----------------------------------------------------------------*/
mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
- /* do the small memory test */
- bxcr_num = short_mem_test();
-
/*------------------------------------------------------------------
* See if the rffd value passed.
*-----------------------------------------------------------------*/
- if (bxcr_num == MAXBXCF) {
+ if (short_mem_test()) {
if (fail_found == TRUE) {
pass_found = TRUE;
if (current_pass_length == 0)
@@ -2578,13 +2609,10 @@ static void DQS_calibration_process(void)
*-----------------------------------------------------------------*/
mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
- /* do the small memory test */
- bxcr_num = short_mem_test();
-
/*------------------------------------------------------------------
* See if the rffd value passed.
*-----------------------------------------------------------------*/
- if (bxcr_num == MAXBXCF) {
+ if (short_mem_test()) {
if (fail_found == TRUE) {
pass_found = TRUE;
if (current_pass_length == 0)
@@ -2612,17 +2640,28 @@ static void DQS_calibration_process(void)
}
}
+ rqfd_average = ((max_start + max_end) >> 1);
+
/*------------------------------------------------------------------
* Make sure we found the valid read passing window. Halt if not
*-----------------------------------------------------------------*/
if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay for the "
+ if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
+ putc('\b');
+ putc(slash[loopi++ % 8]);
+
+ /* try again from with a different RQFD start value */
+ rqfd_start++;
+ goto calibration_loop;
+ }
+
+ printf("\nERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
hang();
}
- rqfd_average = ((max_start + max_end) >> 1);
+ blank_string(strlen(str));
if (rqfd_average < 0)
rqfd_average = 0;
@@ -2630,12 +2669,6 @@ static void DQS_calibration_process(void)
if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
rqfd_average = SDRAM_RQDC_RQFD_MAX;
- /*------------------------------------------------------------------
- * Restore the ECC variable to what it originally was
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, val);
- mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | ecc_temp);
-
mtsdram(SDRAM_RQDC,
(rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
generated by cgit (git 2.34.1) at 2024-12-28 07:52:40 +0000