summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'cpu')
-rw-r--r--cpu/74xx_7xx/start.S6
-rw-r--r--cpu/arm926ejs/at91sam9/config.mk1
-rw-r--r--cpu/arm926ejs/at91sam9/u-boot.lds (renamed from cpu/at32ap/pm.c)59
-rw-r--r--cpu/arm926ejs/at91sam9/usb.c8
-rw-r--r--cpu/at32ap/Makefile20
-rw-r--r--cpu/at32ap/at32ap700x/Makefile2
-rw-r--r--cpu/at32ap/at32ap700x/clk.c68
-rw-r--r--cpu/at32ap/at32ap700x/gpio.c43
-rw-r--r--cpu/at32ap/at32ap700x/sm.h (renamed from cpu/at32ap/sm.h)0
-rw-r--r--cpu/at32ap/atmel_mci.c12
-rw-r--r--cpu/at32ap/cpu.c50
-rw-r--r--cpu/at32ap/entry.S64
-rw-r--r--cpu/at32ap/exception.c3
-rw-r--r--cpu/at32ap/hsdramc.c102
-rw-r--r--cpu/at32ap/interrupts.c16
-rw-r--r--cpu/at32ap/start.S129
-rw-r--r--cpu/mips/cpu.c10
-rw-r--r--cpu/mpc512x/traps.c8
-rw-r--r--cpu/mpc83xx/start.S6
-rw-r--r--cpu/mpc85xx/cpu.c152
-rw-r--r--cpu/mpc85xx/cpu_init.c39
-rw-r--r--cpu/mpc85xx/fdt.c128
-rw-r--r--cpu/mpc85xx/spd_sdram.c2
-rw-r--r--cpu/mpc85xx/traps.c8
-rw-r--r--cpu/mpc86xx/cpu.c4
-rw-r--r--cpu/mpc86xx/cpu_init.c3
-rw-r--r--cpu/mpc86xx/spd_sdram.c6
-rw-r--r--cpu/mpc86xx/traps.c8
-rw-r--r--cpu/nios/spi.c79
29 files changed, 700 insertions, 336 deletions
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index b5834b91e3..42b0f72ac0 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -316,7 +316,7 @@ invalidate_bats:
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
@@ -327,7 +327,7 @@ invalidate_bats:
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
@@ -414,7 +414,7 @@ setup_bats:
mtspr DBAT3U, r3
isync
-#ifdef CONFIG_750FX
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
diff --git a/cpu/arm926ejs/at91sam9/config.mk b/cpu/arm926ejs/at91sam9/config.mk
index ca2cae181b..83040ebe73 100644
--- a/cpu/arm926ejs/at91sam9/config.mk
+++ b/cpu/arm926ejs/at91sam9/config.mk
@@ -1,2 +1,3 @@
PLATFORM_CPPFLAGS += -march=armv5te
PLATFORM_CPPFLAGS += $(call cc-option,-mtune=arm926ejs,)
+LDSCRIPT := $(SRCTREE)/cpu/arm926ejs/at91sam9/u-boot.lds
diff --git a/cpu/at32ap/pm.c b/cpu/arm926ejs/at91sam9/u-boot.lds
index c78d547f85..996f401f0b 100644
--- a/cpu/at32ap/pm.c
+++ b/cpu/arm926ejs/at91sam9/u-boot.lds
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2006 Atmel Corporation
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -11,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -19,24 +20,38 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
-#include <common.h>
-#ifdef CFG_POWER_MANAGER
-#include <asm/errno.h>
-#include <asm/io.h>
-
-#include <asm/arch/memory-map.h>
-
-#include "sm.h"
-
-
-#ifdef CONFIG_PLL
-#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-#else
-#define MAIN_CLK_RATE (CFG_OSC0_HZ)
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-
-#endif /* CFG_POWER_MANAGER */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm926ejs/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/cpu/arm926ejs/at91sam9/usb.c b/cpu/arm926ejs/at91sam9/usb.c
index 441349df3a..2a92f734dd 100644
--- a/cpu/arm926ejs/at91sam9/usb.c
+++ b/cpu/arm926ejs/at91sam9/usb.c
@@ -33,7 +33,11 @@ int usb_cpu_init(void)
{
/* Enable USB host clock. */
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+#ifdef CONFIG_AT91SAM9261
+ at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0);
+#else
at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
+#endif
return 0;
}
@@ -42,7 +46,11 @@ int usb_cpu_stop(void)
{
/* Disable USB host clock. */
at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+#ifdef CONFIG_AT91SAM9261
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0);
+#else
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
+#endif
return 0;
}
diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile
index f69b1f3854..d16c58b773 100644
--- a/cpu/at32ap/Makefile
+++ b/cpu/at32ap/Makefile
@@ -27,13 +27,19 @@ include $(TOPDIR)/config.mk
LIB := $(obj)lib$(CPU).a
-START := start.o
-SOBJS := entry.o
-COBJS := cpu.o hsdramc.o exception.o cache.o
-COBJS += interrupts.o pio.o atmel_mci.o
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
+START-y += start.o
+
+COBJS-y += cpu.o
+COBJS-y += hsdramc.o
+COBJS-y += exception.o
+COBJS-y += cache.o
+COBJS-y += interrupts.o
+COBJS-y += pio.o
+COBJS-$(CONFIG_MMC) += atmel_mci.o
+
+SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+START := $(addprefix $(obj),$(START-y))
all: $(obj).depend $(START) $(LIB)
diff --git a/cpu/at32ap/at32ap700x/Makefile b/cpu/at32ap/at32ap700x/Makefile
index d276712118..740423563e 100644
--- a/cpu/at32ap/at32ap700x/Makefile
+++ b/cpu/at32ap/at32ap700x/Makefile
@@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)lib$(SOC).a
-COBJS := gpio.o
+COBJS := gpio.o clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
new file mode 100644
index 0000000000..b3aa03495f
--- /dev/null
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2005-2008 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#include "sm.h"
+
+void clk_init(void)
+{
+ uint32_t cksel;
+
+ /* in case of soft resets, disable watchdog */
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0x55));
+ sm_writel(WDT_CTRL, SM_BF(KEY, 0xaa));
+
+#ifdef CONFIG_PLL
+ /* Initialize the PLL */
+ sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
+ | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
+ | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
+ | SM_BF(PLLOPT, CFG_PLL0_OPT)
+ | SM_BF(PLLOSC, 0)
+ | SM_BIT(PLLEN)));
+
+ /* Wait for lock */
+ while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
+#endif
+
+ /* Set up clocks for the CPU and all peripheral buses */
+ cksel = 0;
+ if (CFG_CLKDIV_CPU)
+ cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
+ if (CFG_CLKDIV_HSB)
+ cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
+ if (CFG_CLKDIV_PBA)
+ cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
+ if (CFG_CLKDIV_PBB)
+ cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
+ sm_writel(PM_CKSEL, cksel);
+
+#ifdef CONFIG_PLL
+ /* Use PLL0 as main clock */
+ sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
+#endif
+}
diff --git a/cpu/at32ap/at32ap700x/gpio.c b/cpu/at32ap/at32ap700x/gpio.c
index 859124a91f..3da35d4fe2 100644
--- a/cpu/at32ap/at32ap700x/gpio.c
+++ b/cpu/at32ap/at32ap700x/gpio.c
@@ -21,8 +21,11 @@
*/
#include <common.h>
+#include <asm/io.h>
+
#include <asm/arch/chip-features.h>
#include <asm/arch/gpio.h>
+#include <asm/arch/memory-map.h>
/*
* Lots of small functions here. We depend on --gc-sections getting
@@ -142,3 +145,43 @@ void gpio_enable_mmci(void)
gpio_select_periph_A(GPIO_PIN_PA15, 0); /* DATA3 */
}
#endif
+
+#ifdef AT32AP700x_CHIP_HAS_SPI
+void gpio_enable_spi0(unsigned long cs_mask)
+{
+ u32 pa_mask = 0;
+
+ gpio_select_periph_A(GPIO_PIN_PA0, 0); /* MISO */
+ gpio_select_periph_A(GPIO_PIN_PA1, 0); /* MOSI */
+ gpio_select_periph_A(GPIO_PIN_PA2, 0); /* SCK */
+
+ if (cs_mask & (1 << 0))
+ pa_mask |= 1 << 3; /* NPCS0 */
+ if (cs_mask & (1 << 1))
+ pa_mask |= 1 << 4; /* NPCS1 */
+ if (cs_mask & (1 << 2))
+ pa_mask |= 1 << 5; /* NPCS2 */
+ if (cs_mask & (1 << 3))
+ pa_mask |= 1 << 20; /* NPCS3 */
+
+ __raw_writel(pa_mask, PIOA_BASE + 0x00);
+ __raw_writel(pa_mask, PIOA_BASE + 0x30);
+ __raw_writel(pa_mask, PIOA_BASE + 0x10);
+}
+
+void gpio_enable_spi1(unsigned long cs_mask)
+{
+ gpio_select_periph_B(GPIO_PIN_PA0, 0); /* MISO */
+ gpio_select_periph_B(GPIO_PIN_PB1, 0); /* MOSI */
+ gpio_select_periph_B(GPIO_PIN_PB5, 0); /* SCK */
+
+ if (cs_mask & (1 << 0))
+ gpio_select_periph_B(GPIO_PIN_PB2, 0); /* NPCS0 */
+ if (cs_mask & (1 << 1))
+ gpio_select_periph_B(GPIO_PIN_PB3, 0); /* NPCS1 */
+ if (cs_mask & (1 << 2))
+ gpio_select_periph_B(GPIO_PIN_PB4, 0); /* NPCS2 */
+ if (cs_mask & (1 << 3))
+ gpio_select_periph_A(GPIO_PIN_PA27, 0); /* NPCS3 */
+}
+#endif
diff --git a/cpu/at32ap/sm.h b/cpu/at32ap/at32ap700x/sm.h
index 6492c8e81d..6492c8e81d 100644
--- a/cpu/at32ap/sm.h
+++ b/cpu/at32ap/at32ap700x/sm.h
diff --git a/cpu/at32ap/atmel_mci.c b/cpu/at32ap/atmel_mci.c
index f59dfb5995..3795addf05 100644
--- a/cpu/at32ap/atmel_mci.c
+++ b/cpu/at32ap/atmel_mci.c
@@ -21,8 +21,6 @@
*/
#include <common.h>
-#ifdef CONFIG_MMC
-
#include <part.h>
#include <mmc.h>
@@ -139,7 +137,7 @@ mmc_cmd(unsigned long cmd, unsigned long arg,
pr_debug("mmc: status 0x%08lx\n", status);
- if (status & ERROR_FLAGS) {
+ if (status & error_flags) {
printf("mmc: command %lu failed (status: 0x%08lx)\n",
cmd, status);
return -EIO;
@@ -182,12 +180,13 @@ static int mmc_acmd(unsigned long cmd, unsigned long arg,
static unsigned long
mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
- unsigned long *buffer)
+ void *buffer)
{
int ret, i = 0;
unsigned long resp[4];
unsigned long card_status, data;
unsigned long wordcount;
+ u32 *p = buffer;
u32 status;
if (blkcnt == 0)
@@ -225,7 +224,7 @@ mmc_bread(int dev, unsigned long start, lbaint_t blkcnt,
if (status & MMCI_BIT(RXRDY)) {
data = mmci_readl(RDR);
/* pr_debug("%x\n", data); */
- *buffer++ = data;
+ *p++ = data;
wordcount++;
}
} while(wordcount < (mmc_blkdev.blksz / 4));
@@ -443,6 +442,7 @@ static void mci_set_data_timeout(struct mmc_csd *csd)
dtocyc = timeout_clks;
dtomul = 0;
+ shift = 0;
while (dtocyc > 15 && dtomul < 8) {
dtomul++;
shift = dtomul_to_shift[dtomul];
@@ -546,5 +546,3 @@ int mmc2info(ulong addr)
{
return 0;
}
-
-#endif /* CONFIG_MMC */
diff --git a/cpu/at32ap/cpu.c b/cpu/at32ap/cpu.c
index 311466b781..0ba836180e 100644
--- a/cpu/at32ap/cpu.c
+++ b/cpu/at32ap/cpu.c
@@ -30,7 +30,6 @@
#include <asm/arch/memory-map.h>
#include "hsmc3.h"
-#include "sm.h"
/* Sanity checks */
#if (CFG_CLKDIV_CPU > CFG_CLKDIV_HSB) \
@@ -44,47 +43,9 @@
DECLARE_GLOBAL_DATA_PTR;
-static void pm_init(void)
-{
- uint32_t cksel;
-
-#ifdef CONFIG_PLL
- /* Initialize the PLL */
- sm_writel(PM_PLL0, (SM_BF(PLLCOUNT, CFG_PLL0_SUPPRESS_CYCLES)
- | SM_BF(PLLMUL, CFG_PLL0_MUL - 1)
- | SM_BF(PLLDIV, CFG_PLL0_DIV - 1)
- | SM_BF(PLLOPT, CFG_PLL0_OPT)
- | SM_BF(PLLOSC, 0)
- | SM_BIT(PLLEN)));
-
- /* Wait for lock */
- while (!(sm_readl(PM_ISR) & SM_BIT(LOCK0))) ;
-#endif
-
- /* Set up clocks for the CPU and all peripheral buses */
- cksel = 0;
- if (CFG_CLKDIV_CPU)
- cksel |= SM_BIT(CPUDIV) | SM_BF(CPUSEL, CFG_CLKDIV_CPU - 1);
- if (CFG_CLKDIV_HSB)
- cksel |= SM_BIT(HSBDIV) | SM_BF(HSBSEL, CFG_CLKDIV_HSB - 1);
- if (CFG_CLKDIV_PBA)
- cksel |= SM_BIT(PBADIV) | SM_BF(PBASEL, CFG_CLKDIV_PBA - 1);
- if (CFG_CLKDIV_PBB)
- cksel |= SM_BIT(PBBDIV) | SM_BF(PBBSEL, CFG_CLKDIV_PBB - 1);
- sm_writel(PM_CKSEL, cksel);
-
- gd->cpu_hz = get_cpu_clk_rate();
-
-#ifdef CONFIG_PLL
- /* Use PLL0 as main clock */
- sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
-#endif
-}
-
int cpu_init(void)
{
extern void _evba(void);
- char *p;
gd->cpu_hz = CFG_OSC0_HZ;
@@ -95,16 +56,15 @@ int cpu_init(void)
hsmc3_writel(PULSE0, 0x0b0a0906);
hsmc3_writel(SETUP0, 0x00010002);
- pm_init();
+ clk_init();
+ /* Update the CPU speed according to the PLL configuration */
+ gd->cpu_hz = get_cpu_clk_rate();
+
+ /* Set up the exception handler table and enable exceptions */
sysreg_write(EVBA, (unsigned long)&_evba);
asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET));
- /* Lock everything that mess with the flash in the icache */
- for (p = __flashprog_start; p <= (__flashprog_end + CFG_ICACHE_LINESZ);
- p += CFG_ICACHE_LINESZ)
- asm volatile("cache %0, 0x02" : "=m"(*p) :: "memory");
-
return 0;
}
diff --git a/cpu/at32ap/entry.S b/cpu/at32ap/entry.S
deleted file mode 100644
index a6fc68867a..0000000000
--- a/cpu/at32ap/entry.S
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <asm/sysreg.h>
-#include <asm/ptrace.h>
-
- .section .text.exception,"ax"
- .global _evba
- .type _evba,@function
- .align 10
-_evba:
- .irp x,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
- .align 2
- rjmp unknown_exception
- .endr
-
- .global timer_interrupt_handler
- .type timer_interrupt_handler,@function
- .align 2
-timer_interrupt_handler:
- /*
- * Increment timer_overflow and re-write COMPARE with 0xffffffff.
- *
- * We're running at interrupt level 3, so we don't need to save
- * r8-r12 or lr to the stack.
- */
- lda.w r8, timer_overflow
- ld.w r9, r8[0]
- mov r10, -1
- mtsr SYSREG_COMPARE, r10
- sub r9, -1
- st.w r8[0], r9
- rete
-
- .type unknown_exception, @function
-unknown_exception:
- pushm r0-r12
- sub r8, sp, REG_R12 - REG_R0 - 4
- mov r9, lr
- mfsr r10, SYSREG_RAR_EX
- mfsr r11, SYSREG_RSR_EX
- pushm r8-r11
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_unknown_exception
-1: rjmp 1b
diff --git a/cpu/at32ap/exception.c b/cpu/at32ap/exception.c
index 0672685cd0..dc9c3002a4 100644
--- a/cpu/at32ap/exception.c
+++ b/cpu/at32ap/exception.c
@@ -111,7 +111,8 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < CFG_SDRAM_BASE || regs->sp >= gd->stack_end)
+ if (regs->sp < (gd->stack_end - CONFIG_STACKSIZE)
+ || regs->sp >= gd->stack_end)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
dump_mem("\nStack: ", regs->sp, gd->stack_end);
diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c
index 1fcfe75d74..992612b462 100644
--- a/cpu/at32ap/hsdramc.c
+++ b/cpu/at32ap/hsdramc.c
@@ -30,39 +30,32 @@
#include "hsdramc1.h"
-unsigned long sdram_init(const struct sdram_info *info)
+unsigned long sdram_init(void *sdram_base, const struct sdram_config *config)
{
- unsigned long *sdram = (unsigned long *)uncached(info->phys_addr);
unsigned long sdram_size;
- unsigned long tmp;
- unsigned long bus_hz;
+ uint32_t cfgreg;
unsigned int i;
- if (!info->refresh_period)
- panic("ERROR: SDRAM refresh period == 0. "
- "Please update the board code\n");
-
- tmp = (HSDRAMC1_BF(NC, info->col_bits - 8)
- | HSDRAMC1_BF(NR, info->row_bits - 11)
- | HSDRAMC1_BF(NB, info->bank_bits - 1)
- | HSDRAMC1_BF(CAS, info->cas)
- | HSDRAMC1_BF(TWR, info->twr)
- | HSDRAMC1_BF(TRC, info->trc)
- | HSDRAMC1_BF(TRP, info->trp)
- | HSDRAMC1_BF(TRCD, info->trcd)
- | HSDRAMC1_BF(TRAS, info->tras)
- | HSDRAMC1_BF(TXSR, info->txsr));
-
-#ifdef CFG_SDRAM_16BIT
- tmp |= HSDRAMC1_BIT(DBW);
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 1);
-#else
- sdram_size = 1 << (info->row_bits + info->col_bits
- + info->bank_bits + 2);
-#endif
-
- hsdramc1_writel(CR, tmp);
+ cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8)
+ | HSDRAMC1_BF(NR, config->row_bits - 11)
+ | HSDRAMC1_BF(NB, config->bank_bits - 1)
+ | HSDRAMC1_BF(CAS, config->cas)
+ | HSDRAMC1_BF(TWR, config->twr)
+ | HSDRAMC1_BF(TRC, config->trc)
+ | HSDRAMC1_BF(TRP, config->trp)
+ | HSDRAMC1_BF(TRCD, config->trcd)
+ | HSDRAMC1_BF(TRAS, config->tras)
+ | HSDRAMC1_BF(TXSR, config->txsr));
+
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ cfgreg |= HSDRAMC1_BIT(DBW);
+
+ hsdramc1_writel(CR, cfgreg);
+
+ /* Send a NOP to turn on the clock (necessary on some chips) */
+ hsdramc1_writel(MR, HSDRAMC1_MODE_NOP);
+ hsdramc1_readl(MR);
+ writel(0, sdram_base);
/*
* Initialization sequence for SDRAM, from the data sheet:
@@ -77,7 +70,7 @@ unsigned long sdram_init(const struct sdram_info *info)
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 3. Eight auto-refresh (CBR) cycles are provided
@@ -85,58 +78,41 @@ unsigned long sdram_init(const struct sdram_info *info)
hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH);
hsdramc1_readl(MR);
for (i = 0; i < 8; i++)
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 4. A mode register set (MRS) cycle is issued to program
* SDRAM parameters, in particular CAS latency and burst
* length.
*
- * CAS from info struct, burst length 1, serial burst type
+ * The address will be chosen by the SDRAMC automatically; we
+ * just have to make sure BA[1:0] are set to 0.
*/
hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE);
hsdramc1_readl(MR);
- writel(0, sdram + (info->cas << 4));
+ writel(0, sdram_base);
/*
- * 5. A Normal Mode command is provided, 3 clocks after tMRD
- * is met.
- *
- * From the timing diagram, it looks like tMRD is 3
- * cycles...try a dummy read from the peripheral bus.
+ * 5. The application must go into Normal Mode, setting Mode
+ * to 0 in the Mode Register and performing a write access
+ * at any location in the SDRAM.
*/
- hsdramc1_readl(MR);
hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL);
hsdramc1_readl(MR);
- writel(0, sdram);
+ writel(0, sdram_base);
/*
* 6. Write refresh rate into SDRAMC refresh timer count
* register (refresh rate = timing between refresh cycles).
- *
- * 15.6 us is a typical value for a burst of length one
*/
- bus_hz = get_sdram_clk_rate();
- hsdramc1_writel(TR, info->refresh_period);
-
- printf("SDRAM: %u MB at address 0x%08lx\n",
- sdram_size >> 20, info->phys_addr);
-
- printf("Testing SDRAM...");
- for (i = 0; i < sdram_size / 4; i++)
- sdram[i] = i;
-
- for (i = 0; i < sdram_size / 4; i++) {
- tmp = sdram[i];
- if (tmp != i) {
- printf("FAILED at address 0x%08lx\n",
- info->phys_addr + i * 4);
- printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i);
- return 0;
- }
- }
-
- puts("OK\n");
+ hsdramc1_writel(TR, config->refresh_period);
+
+ if (config->data_bits == SDRAM_DATA_16BIT)
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 1);
+ else
+ sdram_size = 1 << (config->row_bits + config->col_bits
+ + config->bank_bits + 2);
return sdram_size;
}
diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c
index bef1f30d79..160838eeeb 100644
--- a/cpu/at32ap/interrupts.c
+++ b/cpu/at32ap/interrupts.c
@@ -98,18 +98,16 @@ void set_timer(unsigned long t)
*/
void udelay(unsigned long usec)
{
- unsigned long now, end;
+ unsigned long cycles;
+ unsigned long base;
+ unsigned long now;
- now = sysreg_read(COUNT);
+ base = sysreg_read(COUNT);
+ cycles = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end = ((usec * (get_tbclk() / 10000)) + 50) / 100;
- end += now;
-
- while (now > end)
- now = sysreg_read(COUNT);
-
- while (now < end)
+ do {
now = sysreg_read(COUNT);
+ } while ((now - base) < cycles);
}
static int set_interrupt_handler(unsigned int nr, void (*handler)(void),
diff --git a/cpu/at32ap/start.S b/cpu/at32ap/start.S
index ab8c2b73d8..907e9b1534 100644
--- a/cpu/at32ap/start.S
+++ b/cpu/at32ap/start.S
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2008 Atmel Corporation
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -20,12 +20,9 @@
* MA 02111-1307 USA
*/
#include <config.h>
+#include <asm/ptrace.h>
#include <asm/sysreg.h>
-#ifndef PART_SPECIFIC_BOOTSTRAP
-# define PART_SPECIFIC_BOOTSTRAP
-#endif
-
#define SYSREG_MMUCR_I_OFFSET 2
#define SYSREG_MMUCR_S_OFFSET 4
@@ -34,11 +31,115 @@
| SYSREG_BIT(FE) | SYSREG_BIT(RE) \
| SYSREG_BIT(IBE) | SYSREG_BIT(IEE))
- .text
+ /*
+ * To save some space, we use the same entry point for
+ * exceptions and reset. This avoids lots of alignment padding
+ * since the reset vector is always suitably aligned.
+ */
+ .section .exception.text, "ax", @progbits
.global _start
+ .global _evba
+ .type _start, @function
+ .type _evba, @function
_start:
- PART_SPECIFIC_BOOTSTRAP
+ .size _start, 0
+_evba:
+ .org 0x00
+ rjmp unknown_exception /* Unrecoverable exception */
+ .org 0x04
+ rjmp unknown_exception /* TLB multiple hit */
+ .org 0x08
+ rjmp unknown_exception /* Bus error data fetch */
+ .org 0x0c
+ rjmp unknown_exception /* Bus error instruction fetch */
+ .org 0x10
+ rjmp unknown_exception /* NMI */
+ .org 0x14
+ rjmp unknown_exception /* Instruction address */
+ .org 0x18
+ rjmp unknown_exception /* ITLB protection */
+ .org 0x1c
+ rjmp unknown_exception /* Breakpoint */
+ .org 0x20
+ rjmp unknown_exception /* Illegal opcode */
+ .org 0x24
+ rjmp unknown_exception /* Unimplemented instruction */
+ .org 0x28
+ rjmp unknown_exception /* Privilege violation */
+ .org 0x2c
+ rjmp unknown_exception /* Floating-point */
+ .org 0x30
+ rjmp unknown_exception /* Coprocessor absent */
+ .org 0x34
+ rjmp unknown_exception /* Data Address (read) */
+ .org 0x38
+ rjmp unknown_exception /* Data Address (write) */
+ .org 0x3c
+ rjmp unknown_exception /* DTLB Protection (read) */
+ .org 0x40
+ rjmp unknown_exception /* DTLB Protection (write) */
+ .org 0x44
+ rjmp unknown_exception /* DTLB Modified */
+
+ .org 0x50
+ rjmp unknown_exception /* ITLB Miss */
+ .org 0x60
+ rjmp unknown_exception /* DTLB Miss (read) */
+ .org 0x70
+ rjmp unknown_exception /* DTLB Miss (write) */
+
+ .size _evba, . - _evba
+
+ .align 2
+ .type unknown_exception, @function
+unknown_exception:
+ /* Figure out whether we're handling an exception (Exception
+ * mode) or just booting (Supervisor mode). */
+ csrfcz SYSREG_M1_OFFSET
+ brcc at32ap_cpu_bootstrap
+
+ /* This is an exception. Complain. */
+ pushm r0-r12
+ sub r8, sp, REG_R12 - REG_R0 - 4
+ mov r9, lr
+ mfsr r10, SYSREG_RAR_EX
+ mfsr r11, SYSREG_RSR_EX
+ pushm r8-r11
+ mfsr r12, SYSREG_ECR
+ mov r11, sp
+ rcall do_unknown_exception
+1: rjmp 1b
+
+ /* The COUNT/COMPARE timer interrupt handler */
+ .global timer_interrupt_handler
+ .type timer_interrupt_handler,@function
+ .align 2
+timer_interrupt_handler:
+ /*
+ * Increment timer_overflow and re-write COMPARE with 0xffffffff.
+ *
+ * We're running at interrupt level 3, so we don't need to save
+ * r8-r12 or lr to the stack.
+ */
+ lda.w r8, timer_overflow
+ ld.w r9, r8[0]
+ mov r10, -1
+ mtsr SYSREG_COMPARE, r10
+ sub r9, -1
+ st.w r8[0], r9
+ rete
+ /*
+ * CPU bootstrap after reset is handled here. SoC code may
+ * override this in case they need to initialize oscillators,
+ * etc.
+ */
+ .section .text.at32ap_cpu_bootstrap, "ax", @progbits
+ .global at32ap_cpu_bootstrap
+ .weak at32ap_cpu_bootstrap
+ .type at32ap_cpu_bootstrap, @function
+ .align 2
+at32ap_cpu_bootstrap:
/* Reset the Status Register */
mov r0, lo(SR_INIT)
orh r0, hi(SR_INIT)
@@ -66,9 +167,16 @@ _start:
lddpc pc, 1f
.align 2
-1: .long 2f
+1: .long at32ap_low_level_init
+ .size _start, . - _start
-2: lddpc sp, sp_init
+ /* Common CPU bootstrap code after oscillator/cache/etc. init */
+ .section .text.avr32ap_low_level_init, "ax", @progbits
+ .global at32ap_low_level_init
+ .type at32ap_low_level_init, @function
+ .align 2
+at32ap_low_level_init:
+ lddpc sp, sp_init
/* Initialize the GOT pointer */
lddpc r6, got_init
@@ -90,6 +198,7 @@ got_init:
* Relocate the u-boot image into RAM and continue from there.
* Does not return.
*/
+ .section .text.relocate_code,"ax",@progbits
.global relocate_code
.type relocate_code,@function
relocate_code:
@@ -162,3 +271,5 @@ in_ram:
.align 2
got_init_reloc:
.long 3b - _GLOBAL_OFFSET_TABLE_
+
+ .size relocate_code, . - relocate_code
diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
index e267bba469..0f58d25b89 100644
--- a/cpu/mips/cpu.c
+++ b/cpu/mips/cpu.c
@@ -66,10 +66,10 @@ void flush_cache(ulong start_addr, ulong size)
void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
{
- write_32bit_cp0_register(CP0_ENTRYLO0, low0);
- write_32bit_cp0_register(CP0_PAGEMASK, pagemask);
- write_32bit_cp0_register(CP0_ENTRYLO1, low1);
- write_32bit_cp0_register(CP0_ENTRYHI, hi);
- write_32bit_cp0_register(CP0_INDEX, index);
+ write_c0_entrylo0(low0);
+ write_c0_pagemask(pagemask);
+ write_c0_entrylo1(low1);
+ write_c0_entryhi(hi);
+ write_c0_index(index);
tlb_write_indexed();
}
diff --git a/cpu/mpc512x/traps.c b/cpu/mpc512x/traps.c
index 8455c92761..8000fabd4a 100644
--- a/cpu/mpc512x/traps.c
+++ b/cpu/mpc512x/traps.c
@@ -34,7 +34,13 @@ DECLARE_GLOBAL_DATA_PTR;
extern unsigned long search_exception_table(unsigned long);
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
/*
* Trap & Exception support
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 309eb30e8e..c182174791 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -557,7 +557,7 @@ invalidate_bats:
mtspr IBAT1U, r0
mtspr IBAT2U, r0
mtspr IBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr IBAT4U, r0
mtspr IBAT5U, r0
mtspr IBAT6U, r0
@@ -568,7 +568,7 @@ invalidate_bats:
mtspr DBAT1U, r0
mtspr DBAT2U, r0
mtspr DBAT3U, r0
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
mtspr DBAT4U, r0
mtspr DBAT5U, r0
mtspr DBAT6U, r0
@@ -655,7 +655,7 @@ setup_bats:
mtspr DBAT3U, r3
isync
-#if (CFG_HID2 & HID2_HBE)
+#ifdef CONFIG_HIGH_BATS
/* IBAT 4 */
addis r4, r0, CFG_IBAT4L@h
ori r4, r4, CFG_IBAT4L@l
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 98733834e0..2b7e753ece 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -29,41 +29,45 @@
#include <watchdog.h>
#include <command.h>
#include <asm/cache.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-struct cpu_type {
- char name[15];
- u32 soc_ver;
+struct cpu_type cpu_type_list [] = {
+ CPU_TYPE_ENTRY(8533, 8533),
+ CPU_TYPE_ENTRY(8533, 8533_E),
+ CPU_TYPE_ENTRY(8540, 8540),
+ CPU_TYPE_ENTRY(8541, 8541),
+ CPU_TYPE_ENTRY(8541, 8541_E),
+ CPU_TYPE_ENTRY(8543, 8543),
+ CPU_TYPE_ENTRY(8543, 8543_E),
+ CPU_TYPE_ENTRY(8544, 8544),
+ CPU_TYPE_ENTRY(8544, 8544_E),
+ CPU_TYPE_ENTRY(8545, 8545),
+ CPU_TYPE_ENTRY(8545, 8545_E),
+ CPU_TYPE_ENTRY(8547, 8547_E),
+ CPU_TYPE_ENTRY(8548, 8548),
+ CPU_TYPE_ENTRY(8548, 8548_E),
+ CPU_TYPE_ENTRY(8555, 8555),
+ CPU_TYPE_ENTRY(8555, 8555_E),
+ CPU_TYPE_ENTRY(8560, 8560),
+ CPU_TYPE_ENTRY(8567, 8567),
+ CPU_TYPE_ENTRY(8567, 8567_E),
+ CPU_TYPE_ENTRY(8568, 8568),
+ CPU_TYPE_ENTRY(8568, 8568_E),
+ CPU_TYPE_ENTRY(8572, 8572),
+ CPU_TYPE_ENTRY(8572, 8572_E),
};
-#define CPU_TYPE_ENTRY(x) {#x, SVR_##x}
+struct cpu_type *identify_cpu(uint ver)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
+ if (cpu_type_list[i].soc_ver == ver)
+ return &cpu_type_list[i];
-struct cpu_type cpu_type_list [] = {
- CPU_TYPE_ENTRY(8533),
- CPU_TYPE_ENTRY(8533_E),
- CPU_TYPE_ENTRY(8540),
- CPU_TYPE_ENTRY(8541),
- CPU_TYPE_ENTRY(8541_E),
- CPU_TYPE_ENTRY(8543),
- CPU_TYPE_ENTRY(8543_E),
- CPU_TYPE_ENTRY(8544),
- CPU_TYPE_ENTRY(8544_E),
- CPU_TYPE_ENTRY(8545),
- CPU_TYPE_ENTRY(8545_E),
- CPU_TYPE_ENTRY(8547_E),
- CPU_TYPE_ENTRY(8548),
- CPU_TYPE_ENTRY(8548_E),
- CPU_TYPE_ENTRY(8555),
- CPU_TYPE_ENTRY(8555_E),
- CPU_TYPE_ENTRY(8560),
- CPU_TYPE_ENTRY(8567),
- CPU_TYPE_ENTRY(8567_E),
- CPU_TYPE_ENTRY(8568),
- CPU_TYPE_ENTRY(8568_E),
- CPU_TYPE_ENTRY(8572),
- CPU_TYPE_ENTRY(8572_E),
-};
+ return NULL;
+}
int checkcpu (void)
{
@@ -74,9 +78,13 @@ int checkcpu (void)
uint fam;
uint ver;
uint major, minor;
- int i;
- u32 ddr_ratio;
+ struct cpu_type *cpu;
+#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+#else
+ u32 ddr_ratio = 0;
+#endif
svr = get_svr();
ver = SVR_SOC_VER(svr);
@@ -85,14 +93,15 @@ int checkcpu (void)
puts("CPU: ");
- for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
- if (cpu_type_list[i].soc_ver == ver) {
- puts(cpu_type_list[i].name);
- break;
- }
+ cpu = identify_cpu(ver);
+ if (cpu) {
+ puts(cpu->name);
- if (i == ARRAY_SIZE(cpu_type_list))
+ if (svr & 0x80000)
+ puts("E");
+ } else {
puts("Unknown");
+ }
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
@@ -118,7 +127,7 @@ int checkcpu (void)
puts("Clock Configuration:\n");
printf(" CPU:%4lu MHz, ", DIV_ROUND_UP(sysinfo.freqProcessor,1000000));
printf("CCB:%4lu MHz,\n", DIV_ROUND_UP(sysinfo.freqSystemBus,1000000));
- ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%4lu MHz (%lu MT/s data rate), ",
@@ -159,7 +168,7 @@ int checkcpu (void)
}
#ifdef CONFIG_CPM2
- printf("CPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+ printf("CPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
#endif
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
@@ -279,3 +288,68 @@ int dma_xfer(void *dest, uint count, void *src) {
return dma_check();
}
#endif
+/*
+ * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF)
+ * are hardcoded as "1"."size" is the number or entries, not a sizeof.
+ */
+void upmconfig (uint upm, uint * table, uint size)
+{
+ int i, mdr, mad, old_mad = 0;
+ volatile u32 *mxmr;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ int loopval = 0x00004440;
+ volatile u32 *brp,*orp;
+ volatile u8* dummy = NULL;
+ int upmmask;
+
+ switch (upm) {
+ case UPMA:
+ mxmr = &lbc->mamr;
+ upmmask = BR_MS_UPMA;
+ break;
+ case UPMB:
+ mxmr = &lbc->mbmr;
+ upmmask = BR_MS_UPMB;
+ break;
+ case UPMC:
+ mxmr = &lbc->mcmr;
+ upmmask = BR_MS_UPMC;
+ break;
+ default:
+ printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
+ hang();
+ }
+
+ /* Find the address for the dummy write transaction */
+ for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
+ i++, brp += 2, orp += 2) {
+
+ /* Look for a valid BR with selected UPM */
+ if ((in_be32(brp) & (BR_V | upmmask)) == (BR_V | upmmask)) {
+ dummy = (volatile u8*)(in_be32(brp) >> BR_BA_SHIFT);
+ break;
+ }
+ }
+
+ if (i == 8) {
+ printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+ hang();
+ }
+
+ for (i = 0; i < size; i++) {
+ /* 1 */
+ out_be32(mxmr, loopval | 0x10000000 | i); /* OP_WRITE */
+ /* 2 */
+ out_be32(&lbc->mdr, table[i]);
+ /* 3 */
+ mdr = in_be32(&lbc->mdr);
+ /* 4 */
+ *(volatile u8 *)dummy = 0;
+ /* 5 */
+ do {
+ mad = in_be32(mxmr) & 0x3f;
+ } while (mad <= old_mad && !(!mad && i == (size-1)));
+ old_mad = mad;
+ }
+ out_be32(mxmr, loopval); /* OP_NORMAL */
+}
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index e3240b519e..736aef1725 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -148,6 +148,12 @@ void cpu_init_early_f(void)
}
#endif
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
+
+ /* Clear initial global data */
+ memset ((void *) gd, 0, sizeof (gd_t));
+
init_laws();
invalidate_tlb(0);
init_tlbs();
@@ -168,12 +174,6 @@ void cpu_init_f (void)
disable_tlb(14);
disable_tlb(15);
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
#ifdef CONFIG_CPM2
config_8560_ioports((ccsr_cpm_t *)CFG_MPC85xx_CPM_ADDR);
#endif
@@ -254,16 +254,7 @@ void cpu_init_f (void)
int cpu_init_r(void)
{
-#ifdef CONFIG_CLEAR_LAW0
-#ifdef CONFIG_FSL_LAW
- disable_law(0);
-#else
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-
- /* clear alternate boot location LAW (used for sdram, or ddr bank) */
- ecm->lawar0 = 0;
-#endif
-#endif
+ puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
@@ -281,17 +272,17 @@ int cpu_init_r(void)
case 0x20000000:
if (ver == SVR_8548 || ver == SVR_8548_E ||
ver == SVR_8544 || ver == SVR_8568_E) {
- printf ("L2 cache 512KB:");
+ puts ("512 KB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
} else {
- printf ("L2 cache 256KB:");
+ puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
}
break;
case 0x10000000:
- printf ("L2 cache 256KB:");
+ puts("256 KB ");
if (ver == SVR_8544 || ver == SVR_8544_E) {
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
@@ -299,18 +290,18 @@ int cpu_init_r(void)
case 0x30000000:
case 0x00000000:
default:
- printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
+ printf(" unknown size (0x%08x)\n", cache_ctl);
return -1;
}
if (l2cache->l2ctl & 0x80000000) {
- printf(" already enabled.");
+ puts("already enabled");
l2srbar = l2cache->l2srbar0;
#ifdef CFG_INIT_L2_ADDR
if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
l2srbar = CFG_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
- printf(" Moving to 0x%08x", CFG_INIT_L2_ADDR);
+ printf("moving to 0x%08x", CFG_INIT_L2_ADDR);
}
#endif /* CFG_INIT_L2_ADDR */
puts("\n");
@@ -318,10 +309,10 @@ int cpu_init_r(void)
asm("msync;isync");
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
asm("msync;isync");
- printf(" enabled\n");
+ puts("enabled\n");
}
#else
- printf("L2 cache: disabled\n");
+ puts("disabled\n");
#endif
#ifdef CONFIG_QE
uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index bb87740baa..92952e6d6e 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <asm/processor.h>
extern void ft_qe_setup(void *blob);
#ifdef CONFIG_MP
@@ -77,6 +78,131 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
}
#endif
+#ifdef CONFIG_L2_CACHE
+/* return size in kilobytes */
+static inline u32 l2cache_size(void)
+{
+ volatile ccsr_l2cache_t *l2cache = (void *)CFG_MPC85xx_L2_ADDR;
+ volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
+ u32 ver = SVR_SOC_VER(get_svr());
+
+ switch (l2siz_field) {
+ case 0x0:
+ break;
+ case 0x1:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 128;
+ else
+ return 256;
+ break;
+ case 0x2:
+ if (ver == SVR_8540 || ver == SVR_8560 ||
+ ver == SVR_8541 || ver == SVR_8541_E ||
+ ver == SVR_8555 || ver == SVR_8555_E)
+ return 256;
+ else
+ return 512;
+ break;
+ case 0x3:
+ return 1024;
+ break;
+ }
+
+ return 0;
+}
+
+static inline void ft_fixup_l2cache(void *blob)
+{
+ int len, off;
+ u32 *ph;
+ struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
+ char compat_buf[38];
+
+ const u32 line_size = 32;
+ const u32 num_ways = 8;
+ const u32 size = l2cache_size() * 1024;
+ const u32 num_sets = size / (line_size * num_ways);
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+ if (off < 0) {
+ debug("no cpu node fount\n");
+ return;
+ }
+
+ ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
+
+ if (ph == NULL) {
+ debug("no next-level-cache property\n");
+ return ;
+ }
+
+ off = fdt_node_offset_by_phandle(blob, *ph);
+ if (off < 0) {
+ printf("%s: %s\n", __func__, fdt_strerror(off));
+ return ;
+ }
+
+ if (cpu) {
+ len = sprintf(compat_buf, "fsl,mpc%s-l2-cache-controller",
+ cpu->name);
+ sprintf(&compat_buf[len + 1], "cache");
+ }
+ fdt_setprop(blob, off, "cache-unified", NULL, 0);
+ fdt_setprop_cell(blob, off, "cache-block-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-line-size", line_size);
+ fdt_setprop_cell(blob, off, "cache-size", size);
+ fdt_setprop_cell(blob, off, "cache-sets", num_sets);
+ fdt_setprop_cell(blob, off, "cache-level", 2);
+ fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
+}
+#else
+#define ft_fixup_l2cache(x)
+#endif
+
+static inline void ft_fixup_cache(void *blob)
+{
+ int off;
+
+ off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+
+ while (off != -FDT_ERR_NOTFOUND) {
+ u32 l1cfg0 = mfspr(SPRN_L1CFG0);
+ u32 l1cfg1 = mfspr(SPRN_L1CFG1);
+ u32 isize, iline_size, inum_sets, inum_ways;
+ u32 dsize, dline_size, dnum_sets, dnum_ways;
+
+ /* d-side config */
+ dsize = (l1cfg0 & 0x7ff) * 1024;
+ dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
+ dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
+ dnum_sets = dsize / (dline_size * dnum_ways);
+
+ fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
+ fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
+ fdt_setprop_cell(blob, off, "d-cache-size", dsize);
+ fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
+
+ /* i-side config */
+ isize = (l1cfg1 & 0x7ff) * 1024;
+ inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
+ iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
+ inum_sets = isize / (iline_size * inum_ways);
+
+ fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
+ fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
+ fdt_setprop_cell(blob, off, "i-cache-size", isize);
+ fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
+
+ off = fdt_node_offset_by_prop_value(blob, off,
+ "device_type", "cpu", 4);
+ }
+
+ ft_fixup_l2cache(blob);
+}
+
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
@@ -114,4 +240,6 @@ void ft_cpu_setup(void *blob, bd_t *bd)
#ifdef CONFIG_MP
ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
#endif
+
+ ft_fixup_cache(blob);
}
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index e3a824999c..8e321eb073 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -1090,7 +1090,7 @@ setup_laws_and_tlbs(unsigned int memsize)
*/
#ifdef CONFIG_FSL_LAW
- set_law(1, CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
+ set_next_law(CFG_DDR_SDRAM_BASE, law_size, LAW_TRGT_IF_DDR);
#endif
/*
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index 2381fb0654..fd36658cb0 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -50,10 +50,12 @@ int (*debugger_exception_handler)(struct pt_regs *) = 0;
extern unsigned long search_exception_table(unsigned long);
/*
- * End of memory as shown by board info and determined by DDR setup.
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
*/
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
static __inline__ void set_tsr(unsigned long val)
{
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
index 3c7476445d..e26bf3671d 100644
--- a/cpu/mpc86xx/cpu.c
+++ b/cpu/mpc86xx/cpu.c
@@ -26,6 +26,7 @@
#include <watchdog.h>
#include <command.h>
#include <asm/cache.h>
+#include <asm/mmu.h>
#include <mpc86xx.h>
#include <asm/fsl_law.h>
@@ -268,13 +269,14 @@ dma_xfer(void *dest, uint count, void *src)
/*
* Print out the state of various machine registers.
- * Currently prints out LAWs and BR0/OR0
+ * Currently prints out LAWs, BR0/OR0, and BATs
*/
void mpc86xx_reginfo(void)
{
immap_t *immap = (immap_t *)CFG_IMMR;
ccsr_lbc_t *lbc = &immap->im_lbc;
+ print_bats();
print_laws();
printf ("Local Bus Controller Registers\n"
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
index 0efd855a39..78ba1ea8e5 100644
--- a/cpu/mpc86xx/cpu_init.c
+++ b/cpu/mpc86xx/cpu_init.c
@@ -119,8 +119,5 @@ void cpu_init_f(void)
*/
int cpu_init_r(void)
{
-#ifdef CONFIG_FSL_LAW
- disable_law(0);
-#endif
return 0;
}
diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c
index 5cc0c266f0..e26db7c3bf 100644
--- a/cpu/mpc86xx/spd_sdram.c
+++ b/cpu/mpc86xx/spd_sdram.c
@@ -1183,7 +1183,7 @@ spd_sdram(void)
* Set up LAWBAR for DDR 1 space.
*/
#ifdef CONFIG_FSL_LAW
- set_law(1, CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
+ set_next_law(CFG_DDR_SDRAM_BASE, law_size_interleaved, LAW_TRGT_IF_DDR_INTRLV);
#endif
debug("Interleaved memory size is 0x%08lx\n", memsize_total);
@@ -1238,7 +1238,7 @@ spd_sdram(void)
* Set up LAWBAR for DDR 1 space.
*/
#ifdef CONFIG_FSL_LAW
- set_law(1, CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
+ set_next_law(CFG_DDR_SDRAM_BASE, law_size_ddr1, LAW_TRGT_IF_DDR_1);
#endif
}
@@ -1265,7 +1265,7 @@ spd_sdram(void)
* Set up LAWBAR for DDR 2 space.
*/
#ifdef CONFIG_FSL_LAW
- set_law(8,
+ set_next_law(
(ddr1_enabled ? (memsize_ddr1 * 1024 * 1024) : CFG_DDR_SDRAM_BASE),
law_size_ddr2, LAW_TRGT_IF_DDR_2);
#endif
diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c
index 04c2e1331b..5695c3e453 100644
--- a/cpu/mpc86xx/traps.c
+++ b/cpu/mpc86xx/traps.c
@@ -43,7 +43,13 @@ int (*debugger_exception_handler)(struct pt_regs *) = 0;
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
+/*
+ * End of addressable memory. This may be less than the actual
+ * amount of memory on the system if we're unable to keep all
+ * the memory mapped in.
+ */
+extern ulong get_effective_memsize(void);
+#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
/*
* Trap & Exception support
diff --git a/cpu/nios/spi.c b/cpu/nios/spi.c
index f37146b793..6408180147 100644
--- a/cpu/nios/spi.c
+++ b/cpu/nios/spi.c
@@ -63,10 +63,10 @@ static char quickhex (int i)
return hex_digit[i];
}
-static void memdump (void *pv, int num)
+static void memdump (const void *pv, int num)
{
int i;
- unsigned char *pc = (unsigned char *) pv;
+ const unsigned char *pc = (const unsigned char *) pv;
for (i = 0; i < num; i++)
printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
@@ -83,26 +83,64 @@ static void memdump (void *pv, int num)
#endif /* DEBUG */
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct spi_slave *slave;
+
+ if (!spi_cs_is_valid(bus, cs))
+ return NULL;
+
+ slave = malloc(sizeof(struct spi_slave));
+ if (!slave)
+ return NULL;
+
+ slave->bus = bus;
+ slave->cs = cs;
+
+ /* TODO: Add support for different modes and speeds */
+
+ return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+
+}
+
/*
* SPI transfer:
*
* See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
* for more informations.
*/
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
+int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
+ void *din, unsigned long flags)
{
+ const u8 *txd = dout;
+ u8 *rxd = din;
int j;
- DPRINT(("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
- (int)chipsel, *(uint *)dout, *(uint *)din, bitlen));
+ DPRINT(("spi_xfer: slave %u:%u dout %08X din %08X bitlen %d\n",
+ slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen));
- memdump((void*)dout, (bitlen + 7) / 8);
+ memdump(dout, (bitlen + 7) / 8);
- if(chipsel != NULL) {
- chipsel(1); /* select the target chip */
- }
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
- if (bitlen > CFG_NIOS_SPIBITS) { /* leave chip select active */
+ if (!(flags & SPI_XFER_END) || bitlen > CFG_NIOS_SPIBITS) {
+ /* leave chip select active */
spi->control |= NIOS_SPI_SSO;
}
@@ -114,11 +152,11 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
- spi->txdata = (unsigned)(dout[j]);
+ spi->txdata = (unsigned)(txd[j]);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
- din[j] = (unsigned char)(spi->rxdata & 0xff);
+ rxd[j] = (unsigned char)(spi->rxdata & 0xff);
#elif (CFG_NIOS_SPIBITS == 16)
j++, j++) {
@@ -126,15 +164,15 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
if ((j+1) < ((bitlen + 7) / 8))
- spi->txdata = (unsigned)((dout[j] << 8) | dout[j+1]);
+ spi->txdata = (unsigned)((txd[j] << 8) | txd[j+1]);
else
- spi->txdata = (unsigned)(dout[j] << 8);
+ spi->txdata = (unsigned)(txd[j] << 8);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
- din[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
+ rxd[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
if ((j+1) < ((bitlen + 7) / 8))
- din[j+1] = (unsigned char)(spi->rxdata & 0xff);
+ rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
#else
#error "*** unsupported value of CFG_NIOS_SPIBITS ***"
@@ -142,15 +180,14 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
}
- if (bitlen > CFG_NIOS_SPIBITS) {
+ if (bitlen > CFG_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
spi->control &= ~NIOS_SPI_SSO;
}
- if(chipsel != NULL) {
- chipsel(0); /* deselect the target chip */
- }
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
- memdump((void*)din, (bitlen + 7) / 8);
+ memdump(din, (bitlen + 7) / 8);
return 0;
}