diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.imx6 | 2 | ||||
| -rw-r--r-- | doc/device-tree-bindings/pmic/rn5t567.txt | 17 | ||||
| -rw-r--r-- | doc/device-tree-bindings/serial/mxc-serial.txt | 8 |
3 files changed, 26 insertions, 1 deletions
diff --git a/doc/README.imx6 b/doc/README.imx6 index 1823fb2c9d..73b8b0beff 100644 --- a/doc/README.imx6 +++ b/doc/README.imx6 @@ -91,7 +91,7 @@ Word 0x00000002: 9f027772 00000004 2. Using imx_usb_loader for first install with SPL -------------------------------------------------- -imx_usb_loader is a very nice tool by BoundaryDevice that +imx_usb_loader is a very nice tool by Boundary Devices that allow to install U-Boot without a JTAG debugger, using the USB boot mode as described in the manual. It is a replacement for Freescale's MFGTOOLS. diff --git a/doc/device-tree-bindings/pmic/rn5t567.txt b/doc/device-tree-bindings/pmic/rn5t567.txt new file mode 100644 index 0000000000..e9e688537c --- /dev/null +++ b/doc/device-tree-bindings/pmic/rn5t567.txt @@ -0,0 +1,17 @@ +Ricoh RN5T567 PMIC + +This file describes the binding info for the PMIC driver. + +Required properties: +- compatible: "ricoh,rn5t567" +- reg: depending on strapping, e.g. 0x33 + +With those two properties, the PMIC device can be used to read/write +registers. + +Example: + +rn5t567@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; +}; diff --git a/doc/device-tree-bindings/serial/mxc-serial.txt b/doc/device-tree-bindings/serial/mxc-serial.txt new file mode 100644 index 0000000000..ede92a4854 --- /dev/null +++ b/doc/device-tree-bindings/serial/mxc-serial.txt @@ -0,0 +1,8 @@ +NXP i.MX (MXC) UART + +Required properties: +- compatible: must be "fsl,imx7d-uart" +- reg: start address and size of the registers + +Optional properties: +- fsl,dte-mode: use DTE mode |