diff options
Diffstat (limited to 'drivers/ddr/marvell/axp/ddr3_hw_training.c')
| -rw-r--r-- | drivers/ddr/marvell/axp/ddr3_hw_training.c | 1115 |
1 files changed, 1115 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.c b/drivers/ddr/marvell/axp/ddr3_hw_training.c new file mode 100644 index 0000000000..a8c5e6a534 --- /dev/null +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.c @@ -0,0 +1,1115 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" +#include "ddr3_hw_training.h" +#include "xor.h" + +#ifdef MV88F78X60 +#include "ddr3_patterns_64bit.h" +#else +#include "ddr3_patterns_16bit.h" +#if defined(MV88F672X) +#include "ddr3_patterns_16bit.h" +#endif +#endif + +/* + * Debug + */ + +#define DEBUG_MAIN_C(s, d, l) \ + DEBUG_MAIN_S(s); DEBUG_MAIN_D(d, l); DEBUG_MAIN_S("\n") +#define DEBUG_MAIN_FULL_C(s, d, l) \ + DEBUG_MAIN_FULL_S(s); DEBUG_MAIN_FULL_D(d, l); DEBUG_MAIN_FULL_S("\n") + +#ifdef MV_DEBUG_MAIN +#define DEBUG_MAIN_S(s) puts(s) +#define DEBUG_MAIN_D(d, l) printf("%x", d) +#else +#define DEBUG_MAIN_S(s) +#define DEBUG_MAIN_D(d, l) +#endif + +#ifdef MV_DEBUG_MAIN_FULL +#define DEBUG_MAIN_FULL_S(s) puts(s) +#define DEBUG_MAIN_FULL_D(d, l) printf("%x", d) +#else +#define DEBUG_MAIN_FULL_S(s) +#define DEBUG_MAIN_FULL_D(d, l) +#endif + +#ifdef MV_DEBUG_SUSPEND_RESUME +#define DEBUG_SUSPEND_RESUME_S(s) puts(s) +#define DEBUG_SUSPEND_RESUME_D(d, l) printf("%x", d) +#else +#define DEBUG_SUSPEND_RESUME_S(s) +#define DEBUG_SUSPEND_RESUME_D(d, l) +#endif + +static u32 ddr3_sw_wl_rl_debug; +static u32 ddr3_run_pbs = 1; + +void ddr3_print_version(void) +{ + puts("DDR3 Training Sequence - Ver 5.7."); +} + +void ddr3_set_sw_wl_rl_debug(u32 val) +{ + ddr3_sw_wl_rl_debug = val; +} + +void ddr3_set_pbs(u32 val) +{ + ddr3_run_pbs = val; +} + +int ddr3_hw_training(u32 target_freq, u32 ddr_width, int xor_bypass, + u32 scrub_offs, u32 scrub_size, int dqs_clk_aligned, + int debug_mode, int reg_dimm_skip_wl) +{ + /* A370 has no PBS mechanism */ + __maybe_unused u32 first_loop_flag = 0; + u32 freq, reg; + MV_DRAM_INFO dram_info; + int ratio_2to1 = 0; + int tmp_ratio = 1; + int status; + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 1\n"); + + memset(&dram_info, 0, sizeof(dram_info)); + dram_info.num_cs = ddr3_get_cs_num_from_reg(); + dram_info.cs_ena = ddr3_get_cs_ena_from_reg(); + dram_info.target_frequency = target_freq; + dram_info.ddr_width = ddr_width; + dram_info.num_of_std_pups = ddr_width / PUP_SIZE; + dram_info.rl400_bug = 0; + dram_info.multi_cs_mr_support = 0; +#ifdef MV88F67XX + dram_info.rl400_bug = 1; +#endif + + /* Ignore ECC errors - if ECC is enabled */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR); + if (reg & (1 << REG_SDRAM_CONFIG_ECC_OFFS)) { + dram_info.ecc_ena = 1; + reg |= (1 << REG_SDRAM_CONFIG_IERR_OFFS); + reg_write(REG_SDRAM_CONFIG_ADDR, reg); + } else { + dram_info.ecc_ena = 0; + } + + reg = reg_read(REG_SDRAM_CONFIG_ADDR); + if (reg & (1 << REG_SDRAM_CONFIG_REGDIMM_OFFS)) + dram_info.reg_dimm = 1; + else + dram_info.reg_dimm = 0; + + dram_info.num_of_total_pups = ddr_width / PUP_SIZE + dram_info.ecc_ena; + + /* Get target 2T value */ + reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR); + dram_info.mode_2t = (reg >> REG_DUNIT_CTRL_LOW_2T_OFFS) & + REG_DUNIT_CTRL_LOW_2T_MASK; + + /* Get target CL value */ +#ifdef MV88F67XX + reg = reg_read(REG_DDR3_MR0_ADDR) >> 2; +#else + reg = reg_read(REG_DDR3_MR0_CS_ADDR) >> 2; +#endif + + reg = (((reg >> 1) & 0xE) | (reg & 0x1)) & 0xF; + dram_info.cl = ddr3_valid_cl_to_cl(reg); + + /* Get target CWL value */ +#ifdef MV88F67XX + reg = reg_read(REG_DDR3_MR2_ADDR) >> REG_DDR3_MR2_CWL_OFFS; +#else + reg = reg_read(REG_DDR3_MR2_CS_ADDR) >> REG_DDR3_MR2_CWL_OFFS; +#endif + + reg &= REG_DDR3_MR2_CWL_MASK; + dram_info.cwl = reg; +#if !defined(MV88F67XX) + /* A370 has no PBS mechanism */ +#if defined(MV88F78X60) + if ((dram_info.target_frequency > DDR_400) && (ddr3_run_pbs)) + first_loop_flag = 1; +#else + /* first_loop_flag = 1; skip mid freq at ALP/A375 */ + if ((dram_info.target_frequency > DDR_400) && (ddr3_run_pbs) && + (mv_ctrl_revision_get() >= UMC_A0)) + first_loop_flag = 1; + else + first_loop_flag = 0; +#endif +#endif + + freq = dram_info.target_frequency; + + /* Set ODT to always on */ + ddr3_odt_activate(1); + + /* Init XOR */ + mv_sys_xor_init(&dram_info); + + /* Get DRAM/HCLK ratio */ + if (reg_read(REG_DDR_IO_ADDR) & (1 << REG_DDR_IO_CLK_RATIO_OFFS)) + ratio_2to1 = 1; + + /* + * Xor Bypass - ECC support in AXP is currently available for 1:1 + * modes frequency modes. + * Not all frequency modes support the ddr3 training sequence + * (Only 1200/300). + * Xor Bypass allows using the Xor initializations and scrubbing + * inside the ddr3 training sequence without running the training + * itself. + */ + if (xor_bypass == 0) { + if (ddr3_run_pbs) { + DEBUG_MAIN_S("DDR3 Training Sequence - Run with PBS.\n"); + } else { + DEBUG_MAIN_S("DDR3 Training Sequence - Run without PBS.\n"); + } + + if (dram_info.target_frequency > DFS_MARGIN) { + tmp_ratio = 0; + freq = DDR_100; + + if (dram_info.reg_dimm == 1) + freq = DDR_300; + + if (MV_OK != ddr3_dfs_high_2_low(freq, &dram_info)) { + /* Set low - 100Mhz DDR Frequency by HW */ + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Dfs High2Low)\n"); + return MV_DDR3_TRAINING_ERR_DFS_H2L; + } + + if ((dram_info.reg_dimm == 1) && + (reg_dimm_skip_wl == 0)) { + if (MV_OK != + ddr3_write_leveling_hw_reg_dimm(freq, + &dram_info)) + DEBUG_MAIN_S("DDR3 Training Sequence - Registered DIMM Low WL - SKIP\n"); + } + + if (ddr3_get_log_level() >= MV_LOG_LEVEL_1) + ddr3_print_freq(freq); + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 2\n"); + } else { + if (!dqs_clk_aligned) { +#ifdef MV88F67XX + /* + * If running training sequence without DFS, + * we must run Write leveling before writing + * the patterns + */ + + /* + * ODT - Multi CS system use SW WL, + * Single CS System use HW WL + */ + if (dram_info.cs_ena > 1) { + if (MV_OK != + ddr3_write_leveling_sw( + freq, tmp_ratio, + &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_SW; + } + } else { + if (MV_OK != + ddr3_write_leveling_hw(freq, + &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + } +#else + if (MV_OK != ddr3_write_leveling_hw( + freq, &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n"); + if (ddr3_sw_wl_rl_debug) { + if (MV_OK != + ddr3_write_leveling_sw( + freq, tmp_ratio, + &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_SW; + } + } else { + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + } +#endif + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 3\n"); + } + + if (MV_OK != ddr3_load_patterns(&dram_info, 0)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Loading Patterns)\n"); + return MV_DDR3_TRAINING_ERR_LOAD_PATTERNS; + } + + /* + * TODO: + * The mainline U-Boot port of the bin_hdr DDR training code + * needs a delay of minimum 20ms here (10ms is a bit too short + * and the CPU hangs). The bin_hdr code doesn't have this delay. + * To be save here, lets add a delay of 50ms here. + * + * Tested on the Marvell DB-MV784MP-GP board + */ + mdelay(50); + + do { + freq = dram_info.target_frequency; + tmp_ratio = ratio_2to1; + DEBUG_MAIN_FULL_S("DDR3 Training Sequence - DEBUG - 4\n"); + +#if defined(MV88F78X60) + /* + * There is a difference on the DFS frequency at the + * first iteration of this loop + */ + if (first_loop_flag) { + freq = DDR_400; + tmp_ratio = 0; + } +#endif + + if (MV_OK != ddr3_dfs_low_2_high(freq, tmp_ratio, + &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Dfs Low2High)\n"); + return MV_DDR3_TRAINING_ERR_DFS_H2L; + } + + if (ddr3_get_log_level() >= MV_LOG_LEVEL_1) { + ddr3_print_freq(freq); + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 5\n"); + + /* Write leveling */ + if (!dqs_clk_aligned) { +#ifdef MV88F67XX + /* + * ODT - Multi CS system that not support Multi + * CS MRS commands must use SW WL + */ + if (dram_info.cs_ena > 1) { + if (MV_OK != ddr3_write_leveling_sw( + freq, tmp_ratio, &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_SW; + } + } else { + if (MV_OK != ddr3_write_leveling_hw( + freq, &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + } +#else + if ((dram_info.reg_dimm == 1) && + (freq == DDR_400)) { + if (reg_dimm_skip_wl == 0) { + if (MV_OK != ddr3_write_leveling_hw_reg_dimm( + freq, &dram_info)) + DEBUG_MAIN_S("DDR3 Training Sequence - Registered DIMM WL - SKIP\n"); + } + } else { + if (MV_OK != ddr3_write_leveling_hw( + freq, &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n"); + if (ddr3_sw_wl_rl_debug) { + if (MV_OK != ddr3_write_leveling_sw( + freq, tmp_ratio, &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_SW; + } + } else { + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + } + } +#endif + if (debug_mode) + DEBUG_MAIN_S + ("DDR3 Training Sequence - DEBUG - 6\n"); + } + + /* Read Leveling */ + /* + * Armada 370 - Support for HCLK @ 400MHZ - must use + * SW read leveling + */ + if (freq == DDR_400 && dram_info.rl400_bug) { + status = ddr3_read_leveling_sw(freq, tmp_ratio, + &dram_info); + if (MV_OK != status) { + DEBUG_MAIN_S + ("DDR3 Training Sequence - FAILED (Read Leveling Sw)\n"); + return status; + } + } else { + if (MV_OK != ddr3_read_leveling_hw( + freq, &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Read Leveling Hw)\n"); + if (ddr3_sw_wl_rl_debug) { + if (MV_OK != ddr3_read_leveling_sw( + freq, tmp_ratio, + &dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Read Leveling Sw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_SW; + } + } else { + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + } + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 7\n"); + + if (MV_OK != ddr3_wl_supplement(&dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hi-Freq Sup)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_HI_FREQ; + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 8\n"); +#if !defined(MV88F67XX) + /* A370 has no PBS mechanism */ +#if defined(MV88F78X60) || defined(MV88F672X) + if (first_loop_flag == 1) { + first_loop_flag = 0; + + status = MV_OK; + status = ddr3_pbs_rx(&dram_info); + if (MV_OK != status) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (PBS RX)\n"); + return status; + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 9\n"); + + status = ddr3_pbs_tx(&dram_info); + if (MV_OK != status) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (PBS TX)\n"); + return status; + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 10\n"); + } +#endif +#endif + } while (freq != dram_info.target_frequency); + + status = ddr3_dqs_centralization_rx(&dram_info); + if (MV_OK != status) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (DQS Centralization RX)\n"); + return status; + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 11\n"); + + status = ddr3_dqs_centralization_tx(&dram_info); + if (MV_OK != status) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (DQS Centralization TX)\n"); + return status; + } + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 12\n"); + } + + ddr3_set_performance_params(&dram_info); + + if (dram_info.ecc_ena) { + /* Need to SCRUB the DRAM memory area to load U-boot */ + mv_sys_xor_finish(); + dram_info.num_cs = 1; + dram_info.cs_ena = 1; + mv_sys_xor_init(&dram_info); + mv_xor_mem_init(0, scrub_offs, scrub_size, 0xdeadbeef, + 0xdeadbeef); + + /* Wait for previous transfer completion */ + while (mv_xor_state_get(0) != MV_IDLE) + ; + + if (debug_mode) + DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 13\n"); + } + + /* Return XOR State */ + mv_sys_xor_finish(); + +#if defined(MV88F78X60) + /* Save training results in memeory for resume state */ + ddr3_save_training(&dram_info); +#endif + /* Clear ODT always on */ + ddr3_odt_activate(0); + + /* Configure Dynamic read ODT */ + ddr3_odt_read_dynamic_config(&dram_info); + + return MV_OK; +} + +void ddr3_set_performance_params(MV_DRAM_INFO *dram_info) +{ + u32 twr2wr, trd2rd, trd2wr_wr2rd; + u32 tmp1, tmp2, reg; + + DEBUG_MAIN_FULL_C("Max WL Phase: ", dram_info->wl_max_phase, 2); + DEBUG_MAIN_FULL_C("Min WL Phase: ", dram_info->wl_min_phase, 2); + DEBUG_MAIN_FULL_C("Max RL Phase: ", dram_info->rl_max_phase, 2); + DEBUG_MAIN_FULL_C("Min RL Phase: ", dram_info->rl_min_phase, 2); + + if (dram_info->wl_max_phase < 2) + twr2wr = 0x2; + else + twr2wr = 0x3; + + trd2rd = 0x1 + (dram_info->rl_max_phase + 1) / 2 + + (dram_info->rl_max_phase + 1) % 2; + + tmp1 = (dram_info->rl_max_phase - dram_info->wl_min_phase) / 2 + + (((dram_info->rl_max_phase - dram_info->wl_min_phase) % 2) > + 0 ? 1 : 0); + tmp2 = (dram_info->wl_max_phase - dram_info->rl_min_phase) / 2 + + ((dram_info->wl_max_phase - dram_info->rl_min_phase) % 2 > + 0 ? 1 : 0); + trd2wr_wr2rd = (tmp1 >= tmp2) ? tmp1 : tmp2; + + trd2wr_wr2rd += 2; + trd2rd += 2; + twr2wr += 2; + + DEBUG_MAIN_FULL_C("WR 2 WR: ", twr2wr, 2); + DEBUG_MAIN_FULL_C("RD 2 RD: ", trd2rd, 2); + DEBUG_MAIN_FULL_C("RD 2 WR / WR 2 RD: ", trd2wr_wr2rd, 2); + + reg = reg_read(REG_SDRAM_TIMING_HIGH_ADDR); + + reg &= ~(REG_SDRAM_TIMING_H_W2W_MASK << REG_SDRAM_TIMING_H_W2W_OFFS); + reg |= ((twr2wr & REG_SDRAM_TIMING_H_W2W_MASK) << + REG_SDRAM_TIMING_H_W2W_OFFS); + + reg &= ~(REG_SDRAM_TIMING_H_R2R_MASK << REG_SDRAM_TIMING_H_R2R_OFFS); + reg &= ~(REG_SDRAM_TIMING_H_R2R_H_MASK << + REG_SDRAM_TIMING_H_R2R_H_OFFS); + reg |= ((trd2rd & REG_SDRAM_TIMING_H_R2R_MASK) << + REG_SDRAM_TIMING_H_R2R_OFFS); + reg |= (((trd2rd >> 2) & REG_SDRAM_TIMING_H_R2R_H_MASK) << + REG_SDRAM_TIMING_H_R2R_H_OFFS); + + reg &= ~(REG_SDRAM_TIMING_H_R2W_W2R_MASK << + REG_SDRAM_TIMING_H_R2W_W2R_OFFS); + reg &= ~(REG_SDRAM_TIMING_H_R2W_W2R_H_MASK << + REG_SDRAM_TIMING_H_R2W_W2R_H_OFFS); + reg |= ((trd2wr_wr2rd & REG_SDRAM_TIMING_H_R2W_W2R_MASK) << + REG_SDRAM_TIMING_H_R2W_W2R_OFFS); + reg |= (((trd2wr_wr2rd >> 2) & REG_SDRAM_TIMING_H_R2W_W2R_H_MASK) << + REG_SDRAM_TIMING_H_R2W_W2R_H_OFFS); + + reg_write(REG_SDRAM_TIMING_HIGH_ADDR, reg); +} + +/* + * Perform DDR3 PUP Indirect Write + */ +void ddr3_write_pup_reg(u32 mode, u32 cs, u32 pup, u32 phase, u32 delay) +{ + u32 reg = 0; + + if (pup == PUP_BC) + reg |= (1 << REG_PHY_BC_OFFS); + else + reg |= (pup << REG_PHY_PUP_OFFS); + + reg |= ((0x4 * cs + mode) << REG_PHY_CS_OFFS); + reg |= (phase << REG_PHY_PHASE_OFFS) | delay; + + if (mode == PUP_WL_MODE) + reg |= ((INIT_WL_DELAY + delay) << REG_PHY_DQS_REF_DLY_OFFS); + + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ + reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR; + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ + + do { + reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) & + REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; + } while (reg); /* Wait for '0' to mark the end of the transaction */ + + /* If read Leveling mode - need to write to register 3 separetly */ + if (mode == PUP_RL_MODE) { + reg = 0; + + if (pup == PUP_BC) + reg |= (1 << REG_PHY_BC_OFFS); + else + reg |= (pup << REG_PHY_PUP_OFFS); + + reg |= ((0x4 * cs + mode + 1) << REG_PHY_CS_OFFS); + reg |= (INIT_RL_DELAY); + + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ + reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR; + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ + + do { + reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) & + REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; + } while (reg); + } +} + +/* + * Perform DDR3 PUP Indirect Read + */ +u32 ddr3_read_pup_reg(u32 mode, u32 cs, u32 pup) +{ + u32 reg; + + reg = (pup << REG_PHY_PUP_OFFS) | + ((0x4 * cs + mode) << REG_PHY_CS_OFFS); + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ + + reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_RD; + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */ + + do { + reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) & + REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; + } while (reg); /* Wait for '0' to mark the end of the transaction */ + + return reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR); /* 0x16A0 */ +} + +/* + * Set training patterns + */ +int ddr3_load_patterns(MV_DRAM_INFO *dram_info, int resume) +{ + u32 reg; + + /* Enable SW override - Required for the ECC Pup */ + reg = reg_read(REG_DRAM_TRAINING_2_ADDR) | + (1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS); + + /* [0] = 1 - Enable SW override */ + /* 0x15B8 - Training SW 2 Register */ + reg_write(REG_DRAM_TRAINING_2_ADDR, reg); + + reg = (1 << REG_DRAM_TRAINING_AUTO_OFFS); + reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */ + + if (resume == 0) { +#if defined(MV88F78X60) || defined(MV88F672X) + ddr3_load_pbs_patterns(dram_info); +#endif + ddr3_load_dqs_patterns(dram_info); + } + + /* Disable SW override - Must be in a different stage */ + /* [0]=0 - Enable SW override */ + reg = reg_read(REG_DRAM_TRAINING_2_ADDR); + reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS); + /* 0x15B8 - Training SW 2 Register */ + reg_write(REG_DRAM_TRAINING_2_ADDR, reg); + + reg = reg_read(REG_DRAM_TRAINING_1_ADDR) | + (1 << REG_DRAM_TRAINING_1_TRNBPOINT_OFFS); + reg_write(REG_DRAM_TRAINING_1_ADDR, reg); + + /* Set Base Addr */ +#if defined(MV88F67XX) + reg_write(REG_DRAM_TRAINING_PATTERN_BASE_ADDR, 0); +#else + if (resume == 0) + reg_write(REG_DRAM_TRAINING_PATTERN_BASE_ADDR, 0); + else + reg_write(REG_DRAM_TRAINING_PATTERN_BASE_ADDR, + RESUME_RL_PATTERNS_ADDR); +#endif + + /* Set Patterns */ + if (resume == 0) { + reg = (dram_info->cs_ena << REG_DRAM_TRAINING_CS_OFFS) | + (1 << REG_DRAM_TRAINING_PATTERNS_OFFS); + } else { + reg = (0x1 << REG_DRAM_TRAINING_CS_OFFS) | + (1 << REG_DRAM_TRAINING_PATTERNS_OFFS); + } + + reg |= (1 << REG_DRAM_TRAINING_AUTO_OFFS); + + reg_write(REG_DRAM_TRAINING_ADDR, reg); + + udelay(100); + + /* Check if Successful */ + if (reg_read(REG_DRAM_TRAINING_ADDR) & + (1 << REG_DRAM_TRAINING_ERROR_OFFS)) + return MV_OK; + else + return MV_FAIL; +} + +#if !defined(MV88F67XX) +/* + * Name: ddr3_save_training(MV_DRAM_INFO *dram_info) + * Desc: saves the training results to memeory (RL,WL,PBS,Rx/Tx + * Centeralization) + * Args: MV_DRAM_INFO *dram_info + * Notes: + * Returns: None. + */ +void ddr3_save_training(MV_DRAM_INFO *dram_info) +{ + u32 val, pup, tmp_cs, cs, i, dq; + u32 crc = 0; + u32 regs = 0; + u32 *sdram_offset = (u32 *)RESUME_TRAINING_VALUES_ADDR; + u32 mode_config[MAX_TRAINING_MODE]; + + mode_config[DQS_WR_MODE] = PUP_DQS_WR; + mode_config[WL_MODE_] = PUP_WL_MODE; + mode_config[RL_MODE_] = PUP_RL_MODE; + mode_config[DQS_RD_MODE] = PUP_DQS_RD; + mode_config[PBS_TX_DM_MODE] = PUP_PBS_TX_DM; + mode_config[PBS_TX_MODE] = PUP_PBS_TX; + mode_config[PBS_RX_MODE] = PUP_PBS_RX; + + /* num of training modes */ + for (i = 0; i < MAX_TRAINING_MODE; i++) { + tmp_cs = dram_info->cs_ena; + /* num of CS */ + for (cs = 0; cs < MAX_CS; cs++) { + if (tmp_cs & (1 << cs)) { + /* num of PUPs */ + for (pup = 0; pup < dram_info->num_of_total_pups; + pup++) { + if (pup == dram_info->num_of_std_pups && + dram_info->ecc_ena) + pup = ECC_PUP; + if (i == PBS_TX_DM_MODE) { + /* + * Change CS bitmask because + * PBS works only with CS0 + */ + tmp_cs = 0x1; + val = ddr3_read_pup_reg( + mode_config[i], CS0, pup); + } else if (i == PBS_TX_MODE || + i == PBS_RX_MODE) { + /* + * Change CS bitmask because + * PBS works only with CS0 + */ + tmp_cs = 0x1; + for (dq = 0; dq <= DQ_NUM; + dq++) { + val = ddr3_read_pup_reg( + mode_config[i] + dq, + CS0, + pup); + (*sdram_offset) = val; + crc += *sdram_offset; + sdram_offset++; + regs++; + } + continue; + } else { + val = ddr3_read_pup_reg( + mode_config[i], cs, pup); + } + + *sdram_offset = val; + crc += *sdram_offset; + sdram_offset++; + regs++; + } + } + } + } + + *sdram_offset = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR); + crc += *sdram_offset; + sdram_offset++; + regs++; + *sdram_offset = reg_read(REG_READ_DATA_READY_DELAYS_ADDR); + crc += *sdram_offset; + sdram_offset++; + regs++; + sdram_offset = (u32 *)NUM_OF_REGISTER_ADDR; + *sdram_offset = regs; + DEBUG_SUSPEND_RESUME_S("Training Results CheckSum write= "); + DEBUG_SUSPEND_RESUME_D(crc, 8); + DEBUG_SUSPEND_RESUME_S("\n"); + sdram_offset = (u32 *)CHECKSUM_RESULT_ADDR; + *sdram_offset = crc; +} + +/* + * Name: ddr3_read_training_results() + * Desc: Reads the training results from memeory (RL,WL,PBS,Rx/Tx + * Centeralization) + * and writes them to the relevant registers + * Args: MV_DRAM_INFO *dram_info + * Notes: + * Returns: None. + */ +int ddr3_read_training_results(void) +{ + u32 val, reg, idx, dqs_wr_idx = 0, crc = 0; + u32 *sdram_offset = (u32 *)RESUME_TRAINING_VALUES_ADDR; + u32 training_val[RESUME_TRAINING_VALUES_MAX] = { 0 }; + u32 regs = *((u32 *)NUM_OF_REGISTER_ADDR); + + /* + * Read Training results & Dunit registers from memory and write + * it to an array + */ + for (idx = 0; idx < regs; idx++) { + training_val[idx] = *sdram_offset; + crc += *sdram_offset; + sdram_offset++; + } + + sdram_offset = (u32 *)CHECKSUM_RESULT_ADDR; + + if ((*sdram_offset) == crc) { + DEBUG_SUSPEND_RESUME_S("Training Results CheckSum read PASS= "); + DEBUG_SUSPEND_RESUME_D(crc, 8); + DEBUG_SUSPEND_RESUME_S("\n"); + } else { + DEBUG_MAIN_S("Wrong Training Results CheckSum\n"); + return MV_FAIL; + } + + /* + * We iterate through all the registers except for the last 2 since + * they are Dunit registers (and not PHY registers) + */ + for (idx = 0; idx < (regs - 2); idx++) { + val = training_val[idx]; + reg = (val >> REG_PHY_CS_OFFS) & 0x3F; /*read the phy address */ + + /* Check if the values belongs to the DQS WR */ + if (reg == PUP_WL_MODE) { + /* bit[5:0] in DQS_WR are delay */ + val = (training_val[dqs_wr_idx++] & 0x3F); + /* + * bit[15:10] are DQS_WR delay & bit[9:0] are + * WL phase & delay + */ + val = (val << REG_PHY_DQS_REF_DLY_OFFS) | + (training_val[idx] & 0x3C003FF); + /* Add Request pending and write operation bits */ + val |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR; + } else if (reg == PUP_DQS_WR) { + /* + * Do nothing since DQS_WR will be done in PUP_WL_MODE + */ + continue; + } + + val |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR; + reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, val); + do { + val = (reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) & + REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; + } while (val); /* Wait for '0' to mark the end of the transaction */ + } + + /* write last 2 Dunit configurations */ + val = training_val[idx]; + reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, val); /* reg 0x1538 */ + val = training_val[idx + 1]; + reg_write(REG_READ_DATA_READY_DELAYS_ADDR, val); /* reg 0x153c */ + + return MV_OK; +} + +/* + * Name: ddr3_check_if_resume_mode() + * Desc: Reads the address (0x3000) of the Resume Magic word (0xDEADB002) + * Args: MV_DRAM_INFO *dram_info + * Notes: + * Returns: return (magic_word == SUSPEND_MAGIC_WORD) + */ +int ddr3_check_if_resume_mode(MV_DRAM_INFO *dram_info, u32 freq) +{ + u32 magic_word; + u32 *sdram_offset = (u32 *)BOOT_INFO_ADDR; + + if (dram_info->reg_dimm != 1) { + /* + * Perform write levleling in order initiate the phy with + * low frequency + */ + if (MV_OK != ddr3_write_leveling_hw(freq, dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + } + + if (MV_OK != ddr3_load_patterns(dram_info, 1)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Loading Patterns)\n"); + return MV_DDR3_TRAINING_ERR_LOAD_PATTERNS; + } + + /* Enable CS0 only for RL */ + dram_info->cs_ena = 0x1; + + /* Perform Read levleling in order to get stable memory */ + if (MV_OK != ddr3_read_leveling_hw(freq, dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Read Leveling Hw)\n"); + return MV_DDR3_TRAINING_ERR_WR_LVL_HW; + } + + /* Back to relevant CS */ + dram_info->cs_ena = ddr3_get_cs_ena_from_reg(); + + magic_word = *sdram_offset; + return magic_word == SUSPEND_MAGIC_WORD; +} + +/* + * Name: ddr3_training_suspend_resume() + * Desc: Execute the Resume state + * Args: MV_DRAM_INFO *dram_info + * Notes: + * Returns: return (magic_word == SUSPEND_MAGIC_WORD) + */ +int ddr3_training_suspend_resume(MV_DRAM_INFO *dram_info) +{ + u32 freq, reg; + int tmp_ratio; + + /* Configure DDR */ + if (MV_OK != ddr3_read_training_results()) + return MV_FAIL; + + /* Reset read FIFO */ + reg = reg_read(REG_DRAM_TRAINING_ADDR); + + /* Start Auto Read Leveling procedure */ + reg |= (1 << REG_DRAM_TRAINING_RL_OFFS); + reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */ + + reg = reg_read(REG_DRAM_TRAINING_2_ADDR); + reg |= ((1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS) + + (1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS)); + + /* [0] = 1 - Enable SW override, [4] = 1 - FIFO reset */ + /* 0x15B8 - Training SW 2 Register */ + reg_write(REG_DRAM_TRAINING_2_ADDR, reg); + + udelay(2); + + reg = reg_read(REG_DRAM_TRAINING_ADDR); + /* Clear Auto Read Leveling procedure */ + reg &= ~(1 << REG_DRAM_TRAINING_RL_OFFS); + reg_write(REG_DRAM_TRAINING_ADDR, reg); /* 0x15B0 - Training Register */ + + /* Return to target frequency */ + freq = dram_info->target_frequency; + tmp_ratio = 1; + if (MV_OK != ddr3_dfs_low_2_high(freq, tmp_ratio, dram_info)) { + DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Dfs Low2High)\n"); + return MV_DDR3_TRAINING_ERR_DFS_H2L; + } + + if (dram_info->ecc_ena) { + /* Scabbling the RL area pattern and the training area */ + mv_sys_xor_finish(); + dram_info->num_cs = 1; + dram_info->cs_ena = 1; + mv_sys_xor_init(dram_info); + mv_xor_mem_init(0, RESUME_RL_PATTERNS_ADDR, + RESUME_RL_PATTERNS_SIZE, 0xFFFFFFFF, 0xFFFFFFFF); + + /* Wait for previous transfer completion */ + + while (mv_xor_state_get(0) != MV_IDLE) + ; + + /* Return XOR State */ + mv_sys_xor_finish(); + } + + return MV_OK; +} +#endif + +void ddr3_print_freq(u32 freq) +{ + u32 tmp_freq; + + switch (freq) { + case 0: + tmp_freq = 100; + break; + case 1: + tmp_freq = 300; + break; + case 2: + tmp_freq = 360; + break; + case 3: + tmp_freq = 400; + break; + case 4: + tmp_freq = 444; + break; + case 5: + tmp_freq = 500; + break; + case 6: + tmp_freq = 533; + break; + case 7: + tmp_freq = 600; + break; + case 8: + tmp_freq = 666; + break; + case 9: + tmp_freq = 720; + break; + case 10: + tmp_freq = 800; + break; + default: + tmp_freq = 100; + } + + printf("Current frequency is: %dMHz\n", tmp_freq); +} + +int ddr3_get_min_max_read_sample_delay(u32 cs_enable, u32 reg, u32 *min, + u32 *max, u32 *cs_max) +{ + u32 cs, delay; + + *min = 0xFFFFFFFF; + *max = 0x0; + + for (cs = 0; cs < MAX_CS; cs++) { + if ((cs_enable & (1 << cs)) == 0) + continue; + + delay = ((reg >> (cs * 8)) & 0x1F); + + if (delay < *min) + *min = delay; + + if (delay > *max) { + *max = delay; + *cs_max = cs; + } + } + + return MV_OK; +} + +int ddr3_get_min_max_rl_phase(MV_DRAM_INFO *dram_info, u32 *min, u32 *max, + u32 cs) +{ + u32 pup, reg, phase; + + *min = 0xFFFFFFFF; + *max = 0x0; + + for (pup = 0; pup < dram_info->num_of_total_pups; pup++) { + reg = ddr3_read_pup_reg(PUP_RL_MODE, cs, pup); + phase = ((reg >> 8) & 0x7); + + if (phase < *min) + *min = phase; + + if (phase > *max) + *max = phase; + } + + return MV_OK; +} + +int ddr3_odt_activate(int activate) +{ + u32 reg, mask; + + mask = (1 << REG_DUNIT_ODT_CTRL_OVRD_OFFS) | + (1 << REG_DUNIT_ODT_CTRL_OVRD_VAL_OFFS); + /* {0x0000149C} - DDR Dunit ODT Control Register */ + reg = reg_read(REG_DUNIT_ODT_CTRL_ADDR); + if (activate) + reg |= mask; + else + reg &= ~mask; + + reg_write(REG_DUNIT_ODT_CTRL_ADDR, reg); + + return MV_OK; +} + +int ddr3_odt_read_dynamic_config(MV_DRAM_INFO *dram_info) +{ + u32 min_read_sample_delay, max_read_sample_delay, max_rl_phase; + u32 min, max, cs_max; + u32 cs_ena, reg; + + reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR); + cs_ena = ddr3_get_cs_ena_from_reg(); + + /* Get minimum and maximum of read sample delay of all CS */ + ddr3_get_min_max_read_sample_delay(cs_ena, reg, &min_read_sample_delay, + &max_read_sample_delay, &cs_max); + + /* + * Get minimum and maximum read leveling phase which belongs to the + * maximal read sample delay + */ + ddr3_get_min_max_rl_phase(dram_info, &min, &max, cs_max); + max_rl_phase = max; + + /* DDR ODT Timing (Low) Register calculation */ + reg = reg_read(REG_ODT_TIME_LOW_ADDR); + reg &= ~(0x1FF << REG_ODT_ON_CTL_RD_OFFS); + reg |= (((min_read_sample_delay - 1) & 0xF) << REG_ODT_ON_CTL_RD_OFFS); + reg |= (((max_read_sample_delay + 4 + (((max_rl_phase + 1) / 2) + 1)) & + 0x1F) << REG_ODT_OFF_CTL_RD_OFFS); + reg_write(REG_ODT_TIME_LOW_ADDR, reg); + + return MV_OK; +} |