diff options
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/i2c/Makefile | 1 | ||||
| -rw-r--r-- | drivers/i2c/i2c_core.c | 44 | ||||
| -rw-r--r-- | drivers/i2c/lpc32xx_i2c.c | 236 | ||||
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.c | 66 | ||||
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.h | 10 | ||||
| -rw-r--r-- | drivers/i2c/pca9564_i2c.c | 179 | ||||
| -rw-r--r-- | drivers/i2c/rk_i2c.c | 2 |
8 files changed, 225 insertions, 327 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 8ac7aaf2d2..4e9afc120a 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -49,6 +49,20 @@ config I2C_CROS_EC_LDO avoid duplicating the logic in the TPS65090 regulator driver for enabling/disabling an LDO. +config I2C_SET_DEFAULT_BUS_NUM + bool "Set default I2C bus number" + depends on DM_I2C + help + Set default number of I2C bus to be accessed. This option provides + behaviour similar to old (i.e. pre DM) I2C bus driver. + +config I2C_DEFAULT_BUS_NUMBER + hex "I2C default bus number" + depends on I2C_SET_DEFAULT_BUS_NUM + default 0x0 + help + Number of default I2C bus to use + config DM_I2C_GPIO bool "Enable Driver Model for software emulated I2C bus driver" depends on DM_I2C && DM_GPIO diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 446af225bc..4872c1d702 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o obj-$(CONFIG_I2C_MV) += mv_i2c.o -obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o obj-$(CONFIG_SYS_I2C) += i2c_core.o diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index 16b1aba32a..19769dab67 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -39,50 +39,6 @@ struct i2c_bus_hose i2c_bus[CONFIG_SYS_NUM_I2C_BUSES] = DECLARE_GLOBAL_DATA_PTR; -void i2c_reloc_fixup(void) -{ -#if defined(CONFIG_NEEDS_MANUAL_RELOC) - struct i2c_adapter *i2c_adap_p = ll_entry_start(struct i2c_adapter, - i2c); - struct i2c_adapter *tmp = i2c_adap_p; - int max = ll_entry_count(struct i2c_adapter, i2c); - int i; - unsigned long addr; - - if (gd->reloc_off == 0) - return; - - for (i = 0; i < max; i++) { - /* i2c_init() */ - addr = (unsigned long)i2c_adap_p->init; - addr += gd->reloc_off; - i2c_adap_p->init = (void *)addr; - /* i2c_probe() */ - addr = (unsigned long)i2c_adap_p->probe; - addr += gd->reloc_off; - i2c_adap_p->probe = (void *)addr; - /* i2c_read() */ - addr = (unsigned long)i2c_adap_p->read; - addr += gd->reloc_off; - i2c_adap_p->read = (void *)addr; - /* i2c_write() */ - addr = (unsigned long)i2c_adap_p->write; - addr += gd->reloc_off; - i2c_adap_p->write = (void *)addr; - /* i2c_set_bus_speed() */ - addr = (unsigned long)i2c_adap_p->set_bus_speed; - addr += gd->reloc_off; - i2c_adap_p->set_bus_speed = (void *)addr; - /* name */ - addr = (unsigned long)i2c_adap_p->name; - addr += gd->reloc_off; - i2c_adap_p->name = (char *)addr; - tmp++; - i2c_adap_p = tmp; - } -#endif -} - #ifndef CONFIG_SYS_I2C_DIRECT_BUS /* * i2c_mux_set() diff --git a/drivers/i2c/lpc32xx_i2c.c b/drivers/i2c/lpc32xx_i2c.c index b0167ab3dc..661d03147a 100644 --- a/drivers/i2c/lpc32xx_i2c.c +++ b/drivers/i2c/lpc32xx_i2c.c @@ -5,9 +5,6 @@ * Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud@3adev.fr> * * SPDX-License-Identifier: GPL-2.0+ - * - * NOTE: This driver should be converted to driver model before June 2017. - * Please see doc/driver-model/i2c-howto.txt for instructions. */ #include <common.h> @@ -15,6 +12,9 @@ #include <i2c.h> #include <linux/errno.h> #include <asm/arch/clk.h> +#include <asm/arch/i2c.h> +#include <dm.h> +#include <mapmem.h> /* * Provide default speed and slave if target did not @@ -28,25 +28,6 @@ #define CONFIG_SYS_I2C_LPC32XX_SLAVE 0 #endif -/* i2c register set */ -struct lpc32xx_i2c_registers { - union { - u32 rx; - u32 tx; - }; - u32 stat; - u32 ctrl; - u32 clk_hi; - u32 clk_lo; - u32 adr; - u32 rxfl; - u32 txfl; - u32 rxb; - u32 txb; - u32 stx; - u32 stxfl; -}; - /* TX register fields */ #define LPC32XX_I2C_TX_START 0x00000100 #define LPC32XX_I2C_TX_STOP 0x00000200 @@ -61,15 +42,17 @@ struct lpc32xx_i2c_registers { #define LPC32XX_I2C_STAT_NAI 0x00000004 #define LPC32XX_I2C_STAT_TDI 0x00000001 -static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = { - (struct lpc32xx_i2c_registers *)I2C1_BASE, - (struct lpc32xx_i2c_registers *)I2C2_BASE, - (struct lpc32xx_i2c_registers *)(USB_BASE + 0x300) +#ifndef CONFIG_DM_I2C +static struct lpc32xx_i2c_base *lpc32xx_i2c[] = { + (struct lpc32xx_i2c_base *)I2C1_BASE, + (struct lpc32xx_i2c_base *)I2C2_BASE, + (struct lpc32xx_i2c_base *)(USB_BASE + 0x300) }; +#endif /* Set I2C bus speed */ -static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap, - unsigned int speed) +static unsigned int __i2c_set_bus_speed(struct lpc32xx_i2c_base *base, + unsigned int speed, unsigned int chip) { int half_period; @@ -77,7 +60,7 @@ static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap, return -EINVAL; /* OTG I2C clock source and CLK registers are different */ - if (adap->hwadapnr == 2) { + if (chip == 2) { half_period = (get_periph_clk_rate() / speed) / 2; if (half_period > 0xFF) return -EINVAL; @@ -87,38 +70,35 @@ static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap, return -EINVAL; } - writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_hi); - writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_lo); + writel(half_period, &base->clk_hi); + writel(half_period, &base->clk_lo); return 0; } /* I2C init called by cmd_i2c when doing 'i2c reset'. */ -static void _i2c_init(struct i2c_adapter *adap, - int requested_speed, int slaveadd) +static void __i2c_init(struct lpc32xx_i2c_base *base, + int requested_speed, int slaveadd, unsigned int chip) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; - /* soft reset (auto-clears) */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); /* set HI and LO periods for half of the default speed */ - lpc32xx_i2c_set_bus_speed(adap, requested_speed); + __i2c_set_bus_speed(base, requested_speed, chip); } /* I2C probe called by cmd_i2c when doing 'i2c probe'. */ -static int lpc32xx_i2c_probe(struct i2c_adapter *adap, u8 dev) +static int __i2c_probe_chip(struct lpc32xx_i2c_base *base, u8 dev) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat; /* Soft-reset the controller */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); - while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); + while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* Addre slave for write with start before and stop after */ writel((dev<<1) | LPC32XX_I2C_TX_START | LPC32XX_I2C_TX_STOP, - &i2c->tx); + &base->tx); /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* was there no acknowledge? */ return (stat & LPC32XX_I2C_STAT_NAI) ? -1 : 0; @@ -128,20 +108,19 @@ static int lpc32xx_i2c_probe(struct i2c_adapter *adap, u8 dev) * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c * Begin write, send address byte(s), begin read, receive data bytes, end. */ -static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, - int alen, u8 *data, int length) +static int __i2c_read(struct lpc32xx_i2c_base *base, u8 dev, uint addr, + int alen, u8 *data, int length) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat, wlen; /* Soft-reset the controller */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); - while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); + while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* do we need to write an address at all? */ if (alen) { /* Address slave in write mode */ - writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); + writel((dev<<1) | LPC32XX_I2C_TX_START, &base->tx); /* write address bytes */ while (alen--) { /* compute address byte + stop for the last one */ @@ -149,44 +128,44 @@ static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, if (!alen) a |= LPC32XX_I2C_TX_STOP; /* Send address byte */ - writel(a, &i2c->tx); + writel(a, &base->tx); } /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ - writel(1, &i2c->stat); + writel(1, &base->stat); } /* do we have to read data at all? */ if (length) { /* Address slave in read mode */ - writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); + writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &base->tx); wlen = length; /* get data */ while (length | wlen) { /* read status for TFF and RFE */ - stat = readl(&i2c->stat); + stat = readl(&base->stat); /* must we, can we write a trigger byte? */ if ((wlen > 0) & (!(stat & LPC32XX_I2C_STAT_TFF))) { wlen--; /* write trigger byte + stop if last */ writel(wlen ? 0 : - LPC32XX_I2C_TX_STOP, &i2c->tx); + LPC32XX_I2C_TX_STOP, &base->tx); } /* must we, can we read a data byte? */ if ((length > 0) & (!(stat & LPC32XX_I2C_STAT_RFE))) { length--; /* read byte */ - *(data++) = readl(&i2c->rx); + *(data++) = readl(&base->rx); } } /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ - writel(1, &i2c->stat); + writel(1, &base->stat); } /* success */ return 0; @@ -196,38 +175,37 @@ static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c * Begin write, send address byte(s), send data bytes, end. */ -static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, - int alen, u8 *data, int length) +static int __i2c_write(struct lpc32xx_i2c_base *base, u8 dev, uint addr, + int alen, u8 *data, int length) { - struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat; /* Soft-reset the controller */ - writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); - while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) + writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl); + while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* do we need to write anything at all? */ if (alen | length) /* Address slave in write mode */ - writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); + writel((dev<<1) | LPC32XX_I2C_TX_START, &base->tx); else return 0; /* write address bytes */ while (alen) { /* wait for transmit fifo not full */ - stat = readl(&i2c->stat); + stat = readl(&base->stat); if (!(stat & LPC32XX_I2C_STAT_TFF)) { alen--; int a = (addr >> (8 * alen)) & 0xff; if (!(alen | length)) a |= LPC32XX_I2C_TX_STOP; /* Send address byte */ - writel(a, &i2c->tx); + writel(a, &base->tx); } } while (length) { /* wait for transmit fifo not full */ - stat = readl(&i2c->stat); + stat = readl(&base->stat); if (!(stat & LPC32XX_I2C_STAT_TFF)) { /* compute data byte, add stop if length==0 */ length--; @@ -235,34 +213,146 @@ static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, if (!length) d |= LPC32XX_I2C_TX_STOP; /* Send data byte */ - writel(d, &i2c->tx); + writel(d, &base->tx); } } /* wait for end of transation */ - while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) + while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ - writel(1, &i2c->stat); + writel(1, &base->stat); return 0; } -U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, _i2c_init, lpc32xx_i2c_probe, +#ifndef CONFIG_DM_I2C +static void lpc32xx_i2c_init(struct i2c_adapter *adap, + int requested_speed, int slaveadd) +{ + __i2c_init(lpc32xx_i2c[adap->hwadapnr], requested_speed, slaveadd, + adap->hwadapnr); +} + +static int lpc32xx_i2c_probe_chip(struct i2c_adapter *adap, u8 dev) +{ + return __i2c_probe_chip(lpc32xx_i2c[adap->hwadapnr], dev); +} + +static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, + int alen, u8 *data, int length) +{ + return __i2c_read(lpc32xx_i2c[adap->hwadapnr], dev, addr, + alen, data, length); +} + +static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, + int alen, u8 *data, int length) +{ + return __i2c_write(lpc32xx_i2c[adap->hwadapnr], dev, addr, + alen, data, length); +} + +static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) +{ + return __i2c_set_bus_speed(lpc32xx_i2c[adap->hwadapnr], speed, + adap->hwadapnr); +} + +U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, lpc32xx_i2c_init, lpc32xx_i2c_probe_chip, lpc32xx_i2c_read, lpc32xx_i2c_write, lpc32xx_i2c_set_bus_speed, CONFIG_SYS_I2C_LPC32XX_SPEED, CONFIG_SYS_I2C_LPC32XX_SLAVE, 0) -U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_1, _i2c_init, lpc32xx_i2c_probe, +U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_1, lpc32xx_i2c_init, lpc32xx_i2c_probe_chip, lpc32xx_i2c_read, lpc32xx_i2c_write, lpc32xx_i2c_set_bus_speed, CONFIG_SYS_I2C_LPC32XX_SPEED, CONFIG_SYS_I2C_LPC32XX_SLAVE, 1) -U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_2, _i2c_init, NULL, +U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_2, lpc32xx_i2c_init, NULL, lpc32xx_i2c_read, lpc32xx_i2c_write, lpc32xx_i2c_set_bus_speed, 100000, 0, 2) +#else /* CONFIG_DM_I2C */ +static int lpc32xx_i2c_probe(struct udevice *bus) +{ + struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus); + bus->seq = dev->index; + + __i2c_init(dev->base, dev->speed, 0, dev->index); + return 0; +} + +static int lpc32xx_i2c_probe_chip(struct udevice *bus, u32 chip_addr, + u32 chip_flags) +{ + struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus); + return __i2c_probe_chip(dev->base, chip_addr); +} + +static int lpc32xx_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, + int nmsgs) +{ + struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus); + struct i2c_msg *dmsg, *omsg, dummy; + uint i = 0, address = 0; + + memset(&dummy, 0, sizeof(struct i2c_msg)); + + /* We expect either two messages (one with an offset and one with the + * actual data) or one message (just data) + */ + if (nmsgs > 2 || nmsgs == 0) { + debug("%s: Only one or two messages are supported.", __func__); + return -1; + } + + omsg = nmsgs == 1 ? &dummy : msg; + dmsg = nmsgs == 1 ? msg : msg + 1; + + /* the address is expected to be a uint, not a array. */ + address = omsg->buf[0]; + for (i = 1; i < omsg->len; i++) + address = (address << 8) + omsg->buf[i]; + + if (dmsg->flags & I2C_M_RD) + return __i2c_read(dev->base, dmsg->addr, address, + omsg->len, dmsg->buf, dmsg->len); + else + return __i2c_write(dev->base, dmsg->addr, address, + omsg->len, dmsg->buf, dmsg->len); +} + +static int lpc32xx_i2c_set_bus_speed(struct udevice *bus, unsigned int speed) +{ + struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus); + return __i2c_set_bus_speed(dev->base, speed, dev->index); +} + +static int lpc32xx_i2c_reset(struct udevice *bus) +{ + struct lpc32xx_i2c_dev *dev = dev_get_platdata(bus); + + __i2c_init(dev->base, dev->speed, 0, dev->index); + return 0; +} + +static const struct dm_i2c_ops lpc32xx_i2c_ops = { + .xfer = lpc32xx_i2c_xfer, + .probe_chip = lpc32xx_i2c_probe_chip, + .deblock = lpc32xx_i2c_reset, + .set_bus_speed = lpc32xx_i2c_set_bus_speed, +}; + +U_BOOT_DRIVER(i2c_lpc32xx) = { + .id = UCLASS_I2C, + .name = "i2c_lpc32xx", + .probe = lpc32xx_i2c_probe, + .ops = &lpc32xx_i2c_ops, +}; +#endif /* CONFIG_DM_I2C */ diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 0006343104..26996e9db9 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -64,36 +64,52 @@ struct omap_i2c { static int omap24_i2c_findpsc(u32 *pscl, u32 *psch, uint speed) { - unsigned int sampleclk, prescaler; - int fsscll, fssclh; + unsigned long internal_clk = 0, fclk; + unsigned int prescaler; - speed <<= 1; - prescaler = 0; /* - * some divisors may cause a precission loss, but shouldn't - * be a big thing, because i2c_clk is then allready very slow. + * This method is only called for Standard and Fast Mode speeds + * + * For some TI SoCs it is explicitly written in TRM (e,g, SPRUHZ6G, + * page 5685, Table 24-7) + * that the internal I2C clock (after prescaler) should be between + * 7-12 MHz (at least for Fast Mode (FS)). + * + * Such approach is used in v4.9 Linux kernel in: + * ./drivers/i2c/busses/i2c-omap.c (omap_i2c_init function). */ - while (prescaler <= 0xFF) { - sampleclk = I2C_IP_CLK / (prescaler+1); - fsscll = sampleclk / speed; - fssclh = fsscll; - fsscll -= I2C_FASTSPEED_SCLL_TRIM; - fssclh -= I2C_FASTSPEED_SCLH_TRIM; - - if (((fsscll > 0) && (fssclh > 0)) && - ((fsscll <= (255-I2C_FASTSPEED_SCLL_TRIM)) && - (fssclh <= (255-I2C_FASTSPEED_SCLH_TRIM)))) { - if (pscl) - *pscl = fsscll; - if (psch) - *psch = fssclh; - - return prescaler; - } - prescaler++; + speed /= 1000; /* convert speed to kHz */ + + if (speed > 100) + internal_clk = 9600; + else + internal_clk = 4000; + + fclk = I2C_IP_CLK / 1000; + prescaler = fclk / internal_clk; + prescaler = prescaler - 1; + + if (speed > 100) { + unsigned long scl; + + /* Fast mode */ + scl = internal_clk / speed; + *pscl = scl - (scl / 3) - I2C_FASTSPEED_SCLL_TRIM; + *psch = (scl / 3) - I2C_FASTSPEED_SCLH_TRIM; + } else { + /* Standard mode */ + *pscl = internal_clk / (speed * 2) - I2C_FASTSPEED_SCLL_TRIM; + *psch = internal_clk / (speed * 2) - I2C_FASTSPEED_SCLH_TRIM; } - return -1; + + debug("%s: speed [kHz]: %d psc: 0x%x sscl: 0x%x ssch: 0x%x\n", + __func__, speed, prescaler, *pscl, *psch); + + if (*pscl <= 0 || *psch <= 0 || prescaler <= 0) + return -EINVAL; + + return prescaler; } /* diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h index 3dae295e55..8a4ae9847c 100644 --- a/drivers/i2c/omap24xx_i2c.h +++ b/drivers/i2c/omap24xx_i2c.h @@ -121,17 +121,17 @@ * scll_trim = 7 * sclh_trim = 5 * - * The linux 2.6.30 kernel uses - * scll_trim = 6 - * sclh_trim = 6 + * The linux 4.9 kernel uses + * scll_trim = 7 + * sclh_trim = 5 * * These are the trim values for standard and fast speed */ #ifndef I2C_FASTSPEED_SCLL_TRIM -#define I2C_FASTSPEED_SCLL_TRIM 6 +#define I2C_FASTSPEED_SCLL_TRIM 7 #endif #ifndef I2C_FASTSPEED_SCLH_TRIM -#define I2C_FASTSPEED_SCLH_TRIM 6 +#define I2C_FASTSPEED_SCLH_TRIM 5 #endif /* These are the trim values for high speed */ diff --git a/drivers/i2c/pca9564_i2c.c b/drivers/i2c/pca9564_i2c.c deleted file mode 100644 index 4ed0923e62..0000000000 --- a/drivers/i2c/pca9564_i2c.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * File: drivers/i2c/pca9564.c - * Based on: drivers/i2c/s3c44b0_i2c.c - * Author: - * - * Created: 2009-06-23 - * Description: PCA9564 i2c bridge driver - * - * Modified: - * Copyright 2009 CJSC "NII STT", http://www.niistt.ru/ - * - * Bugs: - * - * SPDX-License-Identifier: GPL-2.0+ - * - * NOTE: This driver should be converted to driver model before June 2017. - * Please see doc/driver-model/i2c-howto.txt for instructions. - */ - -#include <common.h> -#include <i2c.h> -#include <pca9564.h> -#include <asm/io.h> - -#define PCA_STA (CONFIG_PCA9564_BASE + 0) -#define PCA_TO (CONFIG_PCA9564_BASE + 0) -#define PCA_DAT (CONFIG_PCA9564_BASE + (1 << 2)) -#define PCA_ADR (CONFIG_PCA9564_BASE + (2 << 2)) -#define PCA_CON (CONFIG_PCA9564_BASE + (3 << 2)) - -static unsigned char pca_read_reg(unsigned int reg) -{ - return readb((void *)reg); -} - -static void pca_write_reg(unsigned int reg, unsigned char value) -{ - writeb(value, (void *)reg); -} - -static int pca_wait_busy(void) -{ - unsigned int timeout = 10000; - - while (!(pca_read_reg(PCA_CON) & PCA_CON_SI) && --timeout) - udelay(1); - - if (timeout == 0) - debug("I2C timeout!\n"); - - debug("CON = 0x%02x, STA = 0x%02x\n", pca_read_reg(PCA_CON), - pca_read_reg(PCA_STA)); - - return timeout ? 0 : 1; -} - -/*=====================================================================*/ -/* Public Functions */ -/*=====================================================================*/ - -/*----------------------------------------------------------------------- - * Initialization - */ -void i2c_init(int speed, int slaveaddr) -{ - pca_write_reg(PCA_CON, PCA_CON_ENSIO | speed); -} - -/* - * Probe the given I2C chip address. Returns 0 if a chip responded, - * not 0 on failure. - */ - -int i2c_probe(uchar chip) -{ - unsigned char res; - - pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO); - pca_wait_busy(); - - pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO); - - pca_write_reg(PCA_DAT, (chip << 1) | 1); - res = pca_wait_busy(); - - if ((res == 0) && (pca_read_reg(PCA_STA) == 0x48)) - res = 1; - - pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO); - - return res; -} - -/* - * Read/Write interface: - * chip: I2C chip address, range 0..127 - * addr: Memory (register) address within the chip - * alen: Number of bytes to use for addr (typically 1, 2 for larger - * memories, 0 for register type devices with only one - * register) - * buffer: Where to read/write the data - * len: How many bytes to read/write - * - * Returns: 0 on success, not 0 on failure - */ -int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - int i; - - pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA); - pca_wait_busy(); - - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - - pca_write_reg(PCA_DAT, (chip << 1)); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - - if (alen > 0) { - pca_write_reg(PCA_DAT, addr); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - } - - pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO); - - udelay(500); - - pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - - pca_write_reg(PCA_DAT, (chip << 1) | 1); - pca_wait_busy(); - - for (i = 0; i < len; ++i) { - if (i == len - 1) - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - else - pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_AA); - - pca_wait_busy(); - buffer[i] = pca_read_reg(PCA_DAT); - - } - - pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO); - - return 0; -} - -int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) -{ - int i; - - pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - - pca_write_reg(PCA_DAT, chip << 1); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - - if (alen > 0) { - pca_write_reg(PCA_DAT, addr); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - } - - for (i = 0; i < len; ++i) { - pca_write_reg(PCA_DAT, buffer[i]); - pca_wait_busy(); - pca_write_reg(PCA_CON, PCA_CON_ENSIO); - } - - pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO); - - return 0; -} diff --git a/drivers/i2c/rk_i2c.c b/drivers/i2c/rk_i2c.c index 7c701cbed0..af925cecdb 100644 --- a/drivers/i2c/rk_i2c.c +++ b/drivers/i2c/rk_i2c.c @@ -380,6 +380,8 @@ static const struct dm_i2c_ops rockchip_i2c_ops = { }; static const struct udevice_id rockchip_i2c_ids[] = { + { .compatible = "rockchip,rk3066-i2c" }, + { .compatible = "rockchip,rk3188-i2c" }, { .compatible = "rockchip,rk3288-i2c" }, { } }; |