diff options
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/dw_mmc.c | 12 | ||||
-rw-r--r-- | drivers/mmc/exynos_dw_mmc.c | 205 | ||||
-rw-r--r-- | drivers/mmc/mmc.c | 16 | ||||
-rw-r--r-- | drivers/mmc/s5p_sdhci.c | 42 |
4 files changed, 172 insertions, 103 deletions
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index eb4e2be514..5bf36a0309 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -284,8 +284,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) static void dwmci_set_ios(struct mmc *mmc) { - struct dwmci_host *host = mmc->priv; - u32 ctype; + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + u32 ctype, regs; debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock); @@ -304,6 +304,14 @@ static void dwmci_set_ios(struct mmc *mmc) dwmci_writel(host, DWMCI_CTYPE, ctype); + regs = dwmci_readl(host, DWMCI_UHS_REG); + if (mmc->card_caps & MMC_MODE_DDR_52MHz) + regs |= DWMCI_DDR_MODE; + else + regs &= DWMCI_DDR_MODE; + + dwmci_writel(host, DWMCI_UHS_REG, regs); + if (host->clksel) host->clksel(host); } diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index de8cdcc42b..d96dfe16a5 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -13,6 +13,8 @@ #include <asm/arch/dwmmc.h> #include <asm/arch/clk.h> #include <asm/arch/pinmux.h> +#include <asm/gpio.h> +#include <asm-generic/errno.h> #define DWMMC_MAX_CH_NUM 4 #define DWMMC_MAX_FREQ 52000000 @@ -44,7 +46,11 @@ unsigned int exynos_dwmci_get_clk(struct dwmci_host *host) & DWMCI_DIVRATIO_MASK) + 1; sclk = get_mmc_clk(host->dev_index); - return sclk / clk_div; + /* + * Assume to know divider value. + * When clock unit is broken, need to set "host->div" + */ + return sclk / clk_div / (host->div + 1); } static void exynos_dwmci_board_init(struct dwmci_host *host) @@ -60,48 +66,36 @@ static void exynos_dwmci_board_init(struct dwmci_host *host) } } -/* - * This function adds the mmc channel to be registered with mmc core. - * index - mmc channel number. - * regbase - register base address of mmc channel specified in 'index'. - * bus_width - operating bus width of mmc channel specified in 'index'. - * clksel - value to be written into CLKSEL register in case of FDT. - * NULL in case od non-FDT. - */ -int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) +static int exynos_dwmci_core_init(struct dwmci_host *host, int index) { - struct dwmci_host *host = NULL; unsigned int div; unsigned long freq, sclk; - host = malloc(sizeof(struct dwmci_host)); - if (!host) { - printf("dwmci_host malloc fail!\n"); - return 1; - } + + if (host->bus_hz) + freq = host->bus_hz; + else + freq = DWMMC_MAX_FREQ; + /* request mmc clock vlaue of 52MHz. */ - freq = 52000000; sclk = get_mmc_clk(index); div = DIV_ROUND_UP(sclk, freq); /* set the clock divisor for mmc */ set_mmc_clk(index, div); host->name = "EXYNOS DWMMC"; - host->ioaddr = (void *)regbase; - host->buswidth = bus_width; #ifdef CONFIG_EXYNOS5420 host->quirks = DWMCI_QUIRK_DISABLE_SMU; #endif host->board_init = exynos_dwmci_board_init; - if (clksel) { - host->clksel_val = clksel; - } else { - if (0 == index) + if (!host->clksel_val) { + if (index == 0) host->clksel_val = DWMMC_MMC0_CLKSEL_VAL; - if (2 == index) + else if (index == 2) host->clksel_val = DWMMC_MMC2_CLKSEL_VAL; } + host->caps = MMC_MODE_DDR_52MHz; host->clksel = exynos_dwmci_clksel; host->dev_index = index; host->get_mmc_clk = exynos_dwmci_get_clk; @@ -113,69 +107,134 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) return 0; } +/* + * This function adds the mmc channel to be registered with mmc core. + * index - mmc channel number. + * regbase - register base address of mmc channel specified in 'index'. + * bus_width - operating bus width of mmc channel specified in 'index'. + * clksel - value to be written into CLKSEL register in case of FDT. + * NULL in case od non-FDT. + */ +int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) +{ + struct dwmci_host *host = NULL; + + host = malloc(sizeof(struct dwmci_host)); + if (!host) { + error("dwmci_host malloc fail!\n"); + return -ENOMEM; + } + + host->ioaddr = (void *)regbase; + host->buswidth = bus_width; + + if (clksel) + host->clksel_val = clksel; + + return exynos_dwmci_core_init(host, index); +} + #ifdef CONFIG_OF_CONTROL -int exynos_dwmmc_init(const void *blob) +static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM]; + +static int do_dwmci_init(struct dwmci_host *host) { - int index, bus_width; - int node_list[DWMMC_MAX_CH_NUM]; - int err = 0, dev_id, flag, count, i; - u32 clksel_val, base, timing[3]; + int index, flag, err; - count = fdtdec_find_aliases_for_id(blob, "mmc", - COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list, - DWMMC_MAX_CH_NUM); + index = host->dev_index; - for (i = 0; i < count; i++) { - int node = node_list[i]; + flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; + err = exynos_pinmux_config(host->dev_id, flag); + if (err) { + debug("DWMMC not configure\n"); + return err; + } - if (node <= 0) - continue; + return exynos_dwmci_core_init(host, index); +} - /* Extract device id for each mmc channel */ - dev_id = pinmux_decode_periph_id(blob, node); +static int exynos_dwmci_get_config(const void *blob, int node, + struct dwmci_host *host) +{ + int err = 0; + u32 base, clksel_val, timing[3]; - /* Get the bus width from the device node */ - bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0); - if (bus_width <= 0) { - debug("DWMMC: Can't get bus-width\n"); - return -1; - } - if (8 == bus_width) - flag = PINMUX_FLAG_8BIT_MODE; - else - flag = PINMUX_FLAG_NONE; + /* Extract device id for each mmc channel */ + host->dev_id = pinmux_decode_periph_id(blob, node); - /* config pinmux for each mmc channel */ - err = exynos_pinmux_config(dev_id, flag); - if (err) { - debug("DWMMC not configured\n"); - return err; - } + /* Get the bus width from the device node */ + host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0); + if (host->buswidth <= 0) { + debug("DWMMC: Can't get bus-width\n"); + return -EINVAL; + } - index = dev_id - PERIPH_ID_SDMMC0; + host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id); + if (host->dev_index == host->dev_id) + host->dev_index = host->dev_id - PERIPH_ID_SDMMC0; - /* Get the base address from the device node */ - base = fdtdec_get_addr(blob, node, "reg"); - if (!base) { - debug("DWMMC: Can't get base address\n"); - return -1; - } - /* Extract the timing info from the node */ - err = fdtdec_get_int_array(blob, node, "samsung,timing", - timing, 3); + /* Set the base address from the device node */ + base = fdtdec_get_addr(blob, node, "reg"); + if (!base) { + debug("DWMMC: Can't get base address\n"); + return -EINVAL; + } + host->ioaddr = (void *)base; + + /* Extract the timing info from the node */ + err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3); + if (err) { + debug("Can't get sdr-timings for devider\n"); + return -EINVAL; + } + + clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) | + DWMCI_SET_DRV_CLK(timing[1]) | + DWMCI_SET_DIV_RATIO(timing[2])); + if (clksel_val) + host->clksel_val = clksel_val; + + host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0); + host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0); + host->div = fdtdec_get_int(blob, node, "div", 0); + + return 0; +} + +static int exynos_dwmci_process_node(const void *blob, + int node_list[], int count) +{ + struct dwmci_host *host; + int i, node, err; + + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) + continue; + host = &dwmci_host[i]; + err = exynos_dwmci_get_config(blob, node, host); if (err) { - debug("Can't get sdr-timings for divider\n"); - return -1; + debug("%s: failed to decode dev %d\n", __func__, i); + return err; } - clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) | - DWMCI_SET_DRV_CLK(timing[1]) | - DWMCI_SET_DIV_RATIO(timing[2])); - /* Initialise each mmc channel */ - err = exynos_dwmci_add_port(index, base, bus_width, clksel_val); - if (err) - debug("dwmmc Channel-%d init failed\n", index); + do_dwmci_init(host); } return 0; } + +int exynos_dwmmc_init(const void *blob) +{ + int compat_id; + int node_list[DWMMC_MAX_CH_NUM]; + int err = 0, count; + + compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC; + + count = fdtdec_find_aliases_for_id(blob, "mmc", + compat_id, node_list, DWMMC_MAX_CH_NUM); + err = exynos_dwmci_process_node(blob, node_list, count); + + return err; +} #endif diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 8b53ead98f..55c2c68cdb 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -160,6 +160,9 @@ int mmc_set_blocklen(struct mmc *mmc, int len) { struct mmc_cmd cmd; + if (mmc->card_caps & MMC_MODE_DDR_52MHz) + return 0; + cmd.cmdidx = MMC_CMD_SET_BLOCKLEN; cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = len; @@ -516,10 +519,13 @@ static int mmc_change_freq(struct mmc *mmc) return 0; /* High Speed is set, there are two types: 52MHz and 26MHz */ - if (cardtype & MMC_HS_52MHZ) + if (cardtype & EXT_CSD_CARD_TYPE_52) { + if (cardtype & EXT_CSD_CARD_TYPE_DDR_52) + mmc->card_caps |= MMC_MODE_DDR_52MHz; mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; - else + } else { mmc->card_caps |= MMC_MODE_HS; + } return 0; } @@ -1082,6 +1088,8 @@ static int mmc_startup(struct mmc *mmc) /* An array of possible bus widths in order of preference */ static unsigned ext_csd_bits[] = { + EXT_CSD_DDR_BUS_WIDTH_8, + EXT_CSD_DDR_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_8, EXT_CSD_BUS_WIDTH_4, EXT_CSD_BUS_WIDTH_1, @@ -1089,13 +1097,15 @@ static int mmc_startup(struct mmc *mmc) /* An array to map CSD bus widths to host cap bits */ static unsigned ext_to_hostcaps[] = { + [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz, + [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz, [EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT, [EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT, }; /* An array to map chosen bus width to an integer */ static unsigned widths[] = { - 8, 4, 1, + 8, 4, 8, 4, 1, }; for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) { diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index ccae4ccae1..2ff0ec2a42 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -65,17 +65,9 @@ static void s5p_sdhci_set_control_reg(struct sdhci_host *host) sdhci_writel(host, ctrl, SDHCI_CONTROL2); } -int s5p_sdhci_init(u32 regbase, int index, int bus_width) +static int s5p_sdhci_core_init(struct sdhci_host *host) { - struct sdhci_host *host = NULL; - host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); - if (!host) { - printf("sdhci__host malloc fail!\n"); - return 1; - } - host->name = S5P_NAME; - host->ioaddr = (void *)regbase; host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | @@ -85,15 +77,28 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->set_control_reg = &s5p_sdhci_set_control_reg; host->set_clock = set_mmc_clk; - host->index = index; host->host_caps = MMC_MODE_HC; - if (bus_width == 8) + if (host->bus_width == 8) host->host_caps |= MMC_MODE_8BIT; return add_sdhci(host, 52000000, 400000); } +int s5p_sdhci_init(u32 regbase, int index, int bus_width) +{ + struct sdhci_host *host = malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("sdhci__host malloc fail!\n"); + return 1; + } + host->ioaddr = (void *)regbase; + host->index = index; + host->bus_width = bus_width; + + return s5p_sdhci_core_init(host); +} + #ifdef CONFIG_OF_CONTROL struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS]; @@ -126,20 +131,7 @@ static int do_sdhci_init(struct sdhci_host *host) } } - host->name = S5P_NAME; - - host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | - SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | - SDHCI_QUIRK_WAIT_SEND_CMD; - host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - host->version = sdhci_readw(host, SDHCI_HOST_VERSION); - - host->set_control_reg = &s5p_sdhci_set_control_reg; - host->set_clock = set_mmc_clk; - - host->host_caps = MMC_MODE_HC; - - return add_sdhci(host, 52000000, 400000); + return s5p_sdhci_core_init(host); } static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host) |