diff options
Diffstat (limited to 'drivers/mtd/nand/atmel_nand_ecc.h')
| -rw-r--r-- | drivers/mtd/nand/atmel_nand_ecc.h | 113 |
1 files changed, 113 insertions, 0 deletions
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h index 1ee7f993db..4732582e7f 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -33,4 +33,117 @@ #define ATMEL_ECC_NPR 0x10 /* NParity register */ #define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */ +/* Register access macros for PMECC */ +#define pmecc_readl(addr, reg) \ + readl(&addr->reg) + +#define pmecc_writel(addr, reg, value) \ + writel((value), &addr->reg) + +/* PMECC Register Definitions */ +#define PMECC_MAX_SECTOR_NUM 8 +struct pmecc_regs { + u32 cfg; /* 0x00 PMECC Configuration Register */ + u32 sarea; /* 0x04 PMECC Spare Area Size Register */ + u32 saddr; /* 0x08 PMECC Start Address Register */ + u32 eaddr; /* 0x0C PMECC End Address Register */ + u32 clk; /* 0x10 PMECC Clock Control Register */ + u32 ctrl; /* 0x14 PMECC Control Register */ + u32 sr; /* 0x18 PMECC Status Register */ + u32 ier; /* 0x1C PMECC Interrupt Enable Register */ + u32 idr; /* 0x20 PMECC Interrupt Disable Register */ + u32 imr; /* 0x24 PMECC Interrupt Mask Register */ + u32 isr; /* 0x28 PMECC Interrupt Status Register */ + u32 reserved0[5]; /* 0x2C-0x3C Reserved */ + + /* 0x40 + sector_num * (0x40), Redundancy Registers */ + struct { + u8 ecc[44]; /* PMECC Generated Redundancy Byte Per Sector */ + u32 reserved1[5]; + } ecc_port[PMECC_MAX_SECTOR_NUM]; + + /* 0x240 + sector_num * (0x40) Remainder Registers */ + struct { + u32 rem[12]; + u32 reserved2[4]; + } rem_port[PMECC_MAX_SECTOR_NUM]; + u32 reserved3[16]; /* 0x440-0x47C Reserved */ +}; + +/* For PMECC Configuration Register */ +#define PMECC_CFG_BCH_ERR2 (0 << 0) +#define PMECC_CFG_BCH_ERR4 (1 << 0) +#define PMECC_CFG_BCH_ERR8 (2 << 0) +#define PMECC_CFG_BCH_ERR12 (3 << 0) +#define PMECC_CFG_BCH_ERR24 (4 << 0) + +#define PMECC_CFG_SECTOR512 (0 << 4) +#define PMECC_CFG_SECTOR1024 (1 << 4) + +#define PMECC_CFG_PAGE_1SECTOR (0 << 8) +#define PMECC_CFG_PAGE_2SECTORS (1 << 8) +#define PMECC_CFG_PAGE_4SECTORS (2 << 8) +#define PMECC_CFG_PAGE_8SECTORS (3 << 8) + +#define PMECC_CFG_READ_OP (0 << 12) +#define PMECC_CFG_WRITE_OP (1 << 12) + +#define PMECC_CFG_SPARE_ENABLE (1 << 16) +#define PMECC_CFG_SPARE_DISABLE (0 << 16) + +#define PMECC_CFG_AUTO_ENABLE (1 << 20) +#define PMECC_CFG_AUTO_DISABLE (0 << 20) + +/* For PMECC Clock Control Register */ +#define PMECC_CLK_133MHZ (2 << 0) + +/* For PMECC Control Register */ +#define PMECC_CTRL_RST (1 << 0) +#define PMECC_CTRL_DATA (1 << 1) +#define PMECC_CTRL_USER (1 << 2) +#define PMECC_CTRL_ENABLE (1 << 4) +#define PMECC_CTRL_DISABLE (1 << 5) + +/* For PMECC Status Register */ +#define PMECC_SR_BUSY (1 << 0) +#define PMECC_SR_ENABLE (1 << 4) + +/* PMERRLOC Register Definitions */ +struct pmecc_errloc_regs { + u32 elcfg; /* 0x00 Error Location Configuration Register */ + u32 elprim; /* 0x04 Error Location Primitive Register */ + u32 elen; /* 0x08 Error Location Enable Register */ + u32 eldis; /* 0x0C Error Location Disable Register */ + u32 elsr; /* 0x10 Error Location Status Register */ + u32 elier; /* 0x14 Error Location Interrupt Enable Register */ + u32 elidr; /* 0x08 Error Location Interrupt Disable Register */ + u32 elimr; /* 0x0C Error Location Interrupt Mask Register */ + u32 elisr; /* 0x20 Error Location Interrupt Status Register */ + u32 reserved0; /* 0x24 Reserved */ + u32 sigma[25]; /* 0x28-0x88 Error Location Sigma Registers */ + u32 el[24]; /* 0x8C-0xE8 Error Location Registers */ + u32 reserved1[5]; /* 0xEC-0xFC Reserved */ +}; + +/* For Error Location Configuration Register */ +#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0) +#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0) +#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16) + +/* For Error Location Disable Register */ +#define PMERRLOC_DISABLE (1 << 0) + +/* For Error Location Interrupt Status Register */ +#define PMERRLOC_ERR_NUM_MASK (0x1f << 8) +#define PMERRLOC_CALC_DONE (1 << 0) + +/* Galois field dimension */ +#define PMECC_GF_DIMENSION_13 13 +#define PMECC_GF_DIMENSION_14 14 + +#define PMECC_INDEX_TABLE_SIZE_512 0x2000 +#define PMECC_INDEX_TABLE_SIZE_1024 0x4000 + +#define PMECC_MAX_TIMEOUT_US (100 * 1000) + #endif |