summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/fsl_upm.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/raw/fsl_upm.c')
-rw-r--r--drivers/mtd/nand/raw/fsl_upm.c184
1 files changed, 184 insertions, 0 deletions
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
new file mode 100644
index 0000000000..dfbdbca3ae
--- /dev/null
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * FSL UPM NAND driver
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/fsl_upm.h>
+#include <nand.h>
+
+static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
+{
+ clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
+ (void)in_be32(upm->mxmr);
+}
+
+static void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+ clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
+
+ while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
+ eieio();
+}
+
+static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
+ void __iomem *io_addr, u32 mar)
+{
+ out_be32(upm->mar, mar);
+ (void)in_be32(upm->mar);
+ switch (width) {
+ case 8:
+ out_8(io_addr, 0x0);
+ break;
+ case 16:
+ out_be16(io_addr, 0x0);
+ break;
+ case 32:
+ out_be32(io_addr, 0x0);
+ break;
+ }
+}
+
+static void fun_wait(struct fsl_upm_nand *fun)
+{
+ if (fun->dev_ready) {
+ while (!fun->dev_ready(fun->chip_nr))
+ debug("unexpected busy state\n");
+ } else {
+ /*
+ * If the R/B pin is not connected,
+ * a short delay is necessary.
+ */
+ udelay(1);
+ }
+}
+
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_upm_nand *fun = nand_get_controller_data(chip);
+
+ if (chip_nr >= 0) {
+ fun->chip_nr = chip_nr;
+ chip->IO_ADDR_R = chip->IO_ADDR_W =
+ fun->upm.io_addr + fun->chip_offset * chip_nr;
+ } else if (chip_nr == -1) {
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+ }
+}
+#endif
+
+static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_upm_nand *fun = nand_get_controller_data(chip);
+ void __iomem *io_addr;
+ u32 mar;
+
+ if (!(ctrl & fun->last_ctrl)) {
+ fsl_upm_end_pattern(&fun->upm);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
+ }
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ else if (ctrl & NAND_CLE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ }
+
+ mar = cmd << (32 - fun->width);
+ io_addr = fun->upm.io_addr;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+ if (fun->chip_nr > 0) {
+ io_addr += fun->chip_offset * fun->chip_nr;
+ if (fun->upm_mar_chip_offset)
+ mar |= fun->upm_mar_chip_offset * fun->chip_nr;
+ }
+#endif
+ fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
+
+ /*
+ * Some boards/chips needs this. At least the MPC8360E-RDK
+ * needs it. Probably weird chip, because I don't see any
+ * need for this on MPC8555E + Samsung K9F1G08U0A. Usually
+ * here are 0-2 unexpected busy states per block read.
+ */
+ if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
+ fun_wait(fun);
+}
+
+static u8 upm_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ return in_8(chip->IO_ADDR_R);
+}
+
+static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_upm_nand *fun = nand_get_controller_data(chip);
+
+ for (i = 0; i < len; i++) {
+ out_8(chip->IO_ADDR_W, buf[i]);
+ if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
+ fun_wait(fun);
+ }
+
+ if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
+ fun_wait(fun);
+}
+
+static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd_to_nand(mtd);
+
+ for (i = 0; i < len; i++)
+ buf[i] = in_8(chip->IO_ADDR_R);
+}
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ struct fsl_upm_nand *fun = nand_get_controller_data(chip);
+
+ return fun->dev_ready(fun->chip_nr);
+}
+
+int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
+{
+ if (fun->width != 8 && fun->width != 16 && fun->width != 32)
+ return -ENOSYS;
+
+ fun->last_ctrl = NAND_CLE;
+
+ nand_set_controller_data(chip, fun);
+ chip->chip_delay = fun->chip_delay;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->cmd_ctrl = fun_cmd_ctrl;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+ chip->select_chip = fun_select_chip;
+#endif
+ chip->read_byte = upm_nand_read_byte;
+ chip->read_buf = upm_nand_read_buf;
+ chip->write_buf = upm_nand_write_buf;
+ if (fun->dev_ready)
+ chip->dev_ready = nand_dev_ready;
+
+ return 0;
+}