summaryrefslogtreecommitdiff
path: root/drivers/mtd
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/fsl_upm.c128
-rw-r--r--drivers/mtd/nand/nand_base.c46
2 files changed, 79 insertions, 95 deletions
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 5cc410a5e2..67ae9c8d5b 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -20,112 +20,83 @@
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
-#define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */
-#define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */
-#define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */
-#define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */
+static int fsl_upm_in_pattern;
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset);
+ clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
{
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
+ clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
+
+ while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
eieio();
}
static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
{
- out_be32(upm->mar, cmd << (32 - width * 8));
- out_8(upm->io_addr, 0x0);
-}
-
-static void fsl_upm_setup(struct fsl_upm *upm)
-{
- int i;
-
- /* write upm array */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA);
-
- for (i = 0; i < 64; i++) {
- out_be32(upm->mdr, upm->array[i]);
+ out_be32(upm->mar, cmd << (32 - width));
+ switch (width) {
+ case 8:
out_8(upm->io_addr, 0x0);
+ break;
+ case 16:
+ out_be16(upm->io_addr, 0x0);
+ break;
+ case 32:
+ out_be32(upm->io_addr, 0x0);
+ break;
}
-
- /* normal operation */
- out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO);
- while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO)
- eieio();
}
-static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
- int page_addr)
+static void nand_hwcontrol (struct mtd_info *mtd, int cmd)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
-
- if (command == NAND_CMD_SEQIN) {
- int readcmd;
-
- if (column >= mtd->oobblock) {
- /* OOB area */
- column -= mtd->oobblock;
- readcmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- /* First 256 bytes --> READ0 */
- readcmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- readcmd = NAND_CMD_READ1;
- }
- fsl_upm_run_pattern(&fun->upm, fun->width, readcmd);
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ fsl_upm_in_pattern++;
+ break;
+ case NAND_CTL_SETALE:
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ fsl_upm_in_pattern++;
+ break;
+ case NAND_CTL_CLRCLE:
+ case NAND_CTL_CLRALE:
+ fsl_upm_end_pattern(&fun->upm);
+ fsl_upm_in_pattern--;
+ break;
}
+}
- fsl_upm_run_pattern(&fun->upm, fun->width, command);
-
- fsl_upm_end_pattern(&fun->upm);
-
- fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
-
- if (column != -1)
- fsl_upm_run_pattern(&fun->upm, fun->width, column);
+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *chip = mtd->priv;
- if (page_addr != -1) {
- fsl_upm_run_pattern(&fun->upm, fun->width, page_addr);
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 8) & 0xFF);
- if (chip->chipsize > (32 << 20)) {
- fsl_upm_run_pattern(&fun->upm, fun->width,
- (page_addr >> 16) & 0x0f);
- }
- }
+ if (fsl_upm_in_pattern) {
+ struct fsl_upm_nand *fun = chip->priv;
- fsl_upm_end_pattern(&fun->upm);
+ fsl_upm_run_pattern(&fun->upm, fun->width, byte);
- if (fun->wait_pattern) {
/*
* Some boards/chips needs this. At least on MPC8360E-RDK we
* need it. Probably weird chip, because I don't see any need
* for this on MPC8555E + Samsung K9F1G08U0A. Usually here are
* 0-2 unexpected busy states per block read.
*/
- while (!fun->dev_ready())
- debug("unexpected busy state\n");
+ if (fun->wait_pattern) {
+ while (!fun->dev_ready())
+ debug("unexpected busy state\n");
+ }
+ } else {
+ out_8(chip->IO_ADDR_W, byte);
}
}
-static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-{
- struct nand_chip *chip = mtd->priv;
-
- out_8(chip->IO_ADDR_W, byte);
-}
-
static u8 nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -164,10 +135,6 @@ static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
return 0;
}
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd)
-{
-}
-
static int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -178,23 +145,20 @@ static int nand_dev_ready(struct mtd_info *mtd)
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
{
- /* yet only 8 bit accessors implemented */
- if (fun->width != 1)
+ if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
- fsl_upm_setup(&fun->upm);
-
chip->priv = fun;
chip->chip_delay = fun->chip_delay;
chip->eccmode = NAND_ECC_SOFT;
- chip->cmdfunc = fun_cmdfunc;
chip->hwcontrol = nand_hwcontrol;
chip->read_byte = nand_read_byte;
chip->read_buf = nand_read_buf;
chip->write_byte = nand_write_byte;
chip->write_buf = nand_write_buf;
chip->verify_buf = nand_verify_buf;
- chip->dev_ready = nand_dev_ready;
+ if (fun->dev_ready)
+ chip->dev_ready = nand_dev_ready;
return 0;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 5aef31cd18..740d3fcc37 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -113,18 +113,22 @@ static struct nand_oobinfo nand_oob_64 = {
.oobfree = { {2, 38} }
};
-/* This is used for padding purposes in nand_write_oob */
-static u_char ffchars[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+static struct nand_oobinfo nand_oob_128 = {
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 48,
+ .eccpos = {
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ .oobfree = { {2, 78} }
};
+/* This is used for padding purposes in nand_write_oob */
+static u_char *ffchars;
+
/*
* NAND low-level MTD interface functions
*/
@@ -193,6 +197,10 @@ static void nand_release_device (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
+ if (ffchars) {
+ kfree(ffchars);
+ ffchars = NULL;
+ }
}
#endif
@@ -891,7 +899,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
{
int i, status;
- u_char ecc_code[32];
+ u_char ecc_code[NAND_MAX_OOBSIZE];
int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
uint *oob_config = oobsel->eccpos;
int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
@@ -1112,8 +1120,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
struct nand_chip *this = mtd->priv;
u_char *data_poi, *oob_data = oob_buf;
- u_char ecc_calc[32];
- u_char ecc_code[32];
+ u_char ecc_calc[NAND_MAX_OOBSIZE];
+ u_char ecc_code[NAND_MAX_OOBSIZE];
int eccmode, eccsteps;
unsigned *oob_config;
int datidx;
@@ -1811,6 +1819,15 @@ static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t *
if (NAND_MUST_PAD(this)) {
/* Write out desired data */
this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
+ if (!ffchars) {
+ if (!(ffchars = kmalloc (mtd->oobsize, GFP_KERNEL))) {
+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: "
+ "No memory for padding array, need %d bytes", mtd->oobsize);
+ ret = -ENOMEM;
+ goto out;
+ }
+ memset(ffchars, 0xff, mtd->oobsize);
+ }
/* prepad 0xff for partial programming */
this->write_buf(mtd, ffchars, column);
/* write data */
@@ -2479,6 +2496,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
case 64:
this->autooob = &nand_oob_64;
break;
+ case 128:
+ this->autooob = &nand_oob_128;
+ break;
default:
printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
generated by cgit (git 2.34.1) at 2024-12-26 21:41:33 +0000