diff options
Diffstat (limited to 'drivers/net/npe/include/IxEthAccMac_p.h')
| -rw-r--r-- | drivers/net/npe/include/IxEthAccMac_p.h | 224 |
1 files changed, 0 insertions, 224 deletions
diff --git a/drivers/net/npe/include/IxEthAccMac_p.h b/drivers/net/npe/include/IxEthAccMac_p.h deleted file mode 100644 index 4eafab2585..0000000000 --- a/drivers/net/npe/include/IxEthAccMac_p.h +++ /dev/null @@ -1,224 +0,0 @@ -/* - * - * @par - * IXP400 SW Release version 2.0 - * - * -- Copyright Notice -- - * - * @par - * Copyright 2001-2005, Intel Corporation. - * All rights reserved. - * - * @par - * SPDX-License-Identifier: BSD-3-Clause - * @par - * -- End of Copyright Notice -- -*/ - - -#ifndef IxEthAccMac_p_H -#define IxEthAccMac_p_H - -#include "IxOsal.h" - -#define IX_ETH_ACC_MAX_MULTICAST_ADDRESSES 256 -#define IX_ETH_ACC_NUM_PORTS 3 -#define IX_ETH_ACC_MAX_FRAME_SIZE_DEFAULT 1536 -#define IX_ETH_ACC_MAX_FRAME_SIZE_UPPER_RANGE (65536-64) -#define IX_ETH_ACC_MAX_FRAME_SIZE_LOWER_RANGE 64 - -/* - * - * MAC register definitions - * - */ -#define IX_ETH_ACC_MAC_0_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE -#define IX_ETH_ACC_MAC_1_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE -#define IX_ETH_ACC_MAC_2_BASE IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE - -#define IX_ETH_ACC_MAC_TX_CNTRL1 0x000 -#define IX_ETH_ACC_MAC_TX_CNTRL2 0x004 -#define IX_ETH_ACC_MAC_RX_CNTRL1 0x010 -#define IX_ETH_ACC_MAC_RX_CNTRL2 0x014 -#define IX_ETH_ACC_MAC_RANDOM_SEED 0x020 -#define IX_ETH_ACC_MAC_THRESH_P_EMPTY 0x030 -#define IX_ETH_ACC_MAC_THRESH_P_FULL 0x038 -#define IX_ETH_ACC_MAC_BUF_SIZE_TX 0x040 -#define IX_ETH_ACC_MAC_TX_DEFER 0x050 -#define IX_ETH_ACC_MAC_RX_DEFER 0x054 -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1 0x060 -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2 0x064 -#define IX_ETH_ACC_MAC_SLOT_TIME 0x070 -#define IX_ETH_ACC_MAC_MDIO_CMD_1 0x080 -#define IX_ETH_ACC_MAC_MDIO_CMD_2 0x084 -#define IX_ETH_ACC_MAC_MDIO_CMD_3 0x088 -#define IX_ETH_ACC_MAC_MDIO_CMD_4 0x08c -#define IX_ETH_ACC_MAC_MDIO_STS_1 0x090 -#define IX_ETH_ACC_MAC_MDIO_STS_2 0x094 -#define IX_ETH_ACC_MAC_MDIO_STS_3 0x098 -#define IX_ETH_ACC_MAC_MDIO_STS_4 0x09c -#define IX_ETH_ACC_MAC_ADDR_MASK_1 0x0A0 -#define IX_ETH_ACC_MAC_ADDR_MASK_2 0x0A4 -#define IX_ETH_ACC_MAC_ADDR_MASK_3 0x0A8 -#define IX_ETH_ACC_MAC_ADDR_MASK_4 0x0AC -#define IX_ETH_ACC_MAC_ADDR_MASK_5 0x0B0 -#define IX_ETH_ACC_MAC_ADDR_MASK_6 0x0B4 -#define IX_ETH_ACC_MAC_ADDR_1 0x0C0 -#define IX_ETH_ACC_MAC_ADDR_2 0x0C4 -#define IX_ETH_ACC_MAC_ADDR_3 0x0C8 -#define IX_ETH_ACC_MAC_ADDR_4 0x0CC -#define IX_ETH_ACC_MAC_ADDR_5 0x0D0 -#define IX_ETH_ACC_MAC_ADDR_6 0x0D4 -#define IX_ETH_ACC_MAC_INT_CLK_THRESH 0x0E0 -#define IX_ETH_ACC_MAC_UNI_ADDR_1 0x0F0 -#define IX_ETH_ACC_MAC_UNI_ADDR_2 0x0F4 -#define IX_ETH_ACC_MAC_UNI_ADDR_3 0x0F8 -#define IX_ETH_ACC_MAC_UNI_ADDR_4 0x0FC -#define IX_ETH_ACC_MAC_UNI_ADDR_5 0x100 -#define IX_ETH_ACC_MAC_UNI_ADDR_6 0x104 -#define IX_ETH_ACC_MAC_CORE_CNTRL 0x1FC - - -/* - * - *Bit definitions - * - */ - -/* TX Control Register 1*/ - -#define IX_ETH_ACC_TX_CNTRL1_TX_EN BIT(0) -#define IX_ETH_ACC_TX_CNTRL1_DUPLEX BIT(1) -#define IX_ETH_ACC_TX_CNTRL1_RETRY BIT(2) -#define IX_ETH_ACC_TX_CNTRL1_PAD_EN BIT(3) -#define IX_ETH_ACC_TX_CNTRL1_FCS_EN BIT(4) -#define IX_ETH_ACC_TX_CNTRL1_2DEFER BIT(5) -#define IX_ETH_ACC_TX_CNTRL1_RMII BIT(6) - -/* TX Control Register 2 */ -#define IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK 0xf - -/* RX Control Register 1 */ -#define IX_ETH_ACC_RX_CNTRL1_RX_EN BIT(0) -#define IX_ETH_ACC_RX_CNTRL1_PADSTRIP_EN BIT(1) -#define IX_ETH_ACC_RX_CNTRL1_CRC_EN BIT(2) -#define IX_ETH_ACC_RX_CNTRL1_PAUSE_EN BIT(3) -#define IX_ETH_ACC_RX_CNTRL1_LOOP_EN BIT(4) -#define IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN BIT(5) -#define IX_ETH_ACC_RX_CNTRL1_RX_RUNT_EN BIT(6) -#define IX_ETH_ACC_RX_CNTRL1_BCAST_DIS BIT(7) - -/* RX Control Register 2 */ -#define IX_ETH_ACC_RX_CNTRL2_DEFER_EN BIT(0) - - - -/* Core Control Register */ -#define IX_ETH_ACC_CORE_RESET BIT(0) -#define IX_ETH_ACC_CORE_RX_FIFO_FLUSH BIT(1) -#define IX_ETH_ACC_CORE_TX_FIFO_FLUSH BIT(2) -#define IX_ETH_ACC_CORE_SEND_JAM BIT(3) -#define IX_ETH_ACC_CORE_MDC_EN BIT(4) - -/* 1st bit of 1st MAC octet */ -#define IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ( 1) - - -/* - * - * Default values - * - */ - - -#define IX_ETH_ACC_TX_CNTRL1_DEFAULT (IX_ETH_ACC_TX_CNTRL1_TX_EN | \ - IX_ETH_ACC_TX_CNTRL1_RETRY | \ - IX_ETH_ACC_TX_CNTRL1_FCS_EN | \ - IX_ETH_ACC_TX_CNTRL1_2DEFER | \ - IX_ETH_ACC_TX_CNTRL1_PAD_EN) - -#define IX_ETH_ACC_TX_MAX_RETRIES_DEFAULT 0x0f - -#define IX_ETH_ACC_RX_CNTRL1_DEFAULT (IX_ETH_ACC_RX_CNTRL1_CRC_EN \ - | IX_ETH_ACC_RX_CNTRL1_RX_EN) - -#define IX_ETH_ACC_RX_CNTRL2_DEFAULT 0x0 - -/* Thresholds determined by NPE firmware FS */ -#define IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT 0x12 -#define IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT 0x30 - -/* Number of bytes that must be in the tx fifo before - transmission commences*/ -#define IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT 0x8 - -/* One-part deferral values */ -#define IX_ETH_ACC_MAC_TX_DEFER_DEFAULT 0x15 -#define IX_ETH_ACC_MAC_RX_DEFER_DEFAULT 0x16 - -/* Two-part deferral values... */ -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT 0x08 -#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT 0x07 - -/* This value applies to MII */ -#define IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT 0x80 - -/* This value applies to RMII */ -#define IX_ETH_ACC_MAC_SLOT_TIME_RMII_DEFAULT 0xFF - -#define IX_ETH_ACC_MAC_ADDR_MASK_DEFAULT 0xFF - -#define IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT 0x1 -/*The following is a value chosen at random*/ -#define IX_ETH_ACC_RANDOM_SEED_DEFAULT 0x8 - -/*By default we must configure the MAC to generate the - MDC clock*/ -#define IX_ETH_ACC_CORE_DEFAULT (IX_ETH_ACC_CORE_MDC_EN) - -#define IXP425_ETH_ACC_MAX_PHY 2 -#define IXP425_ETH_ACC_MAX_AN_ENTRIES 20 -#define IX_ETH_ACC_MAC_RESET_DELAY 1 - -#define IX_ETH_ACC_MAC_ALL_BITS_SET 0xFF - -#define IX_ETH_ACC_MAC_MSGID_SHL 24 - -#define IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS 20 -#define IX_ETH_ACC_PORT_DISABLE_DELAY_COUNT 200 /* 4 seconds timeout */ -#define IX_ETH_ACC_PORT_DISABLE_RETRY_COUNT 3 -#define IX_ETH_ACC_MIB_STATS_DELAY_MSECS 2000 /* 2 seconds delay for ethernet stats */ - -/*Register access macros*/ -#if (CPU == SIMSPARCSOLARIS) -extern void registerWriteStub (UINT32 base, UINT32 offset, UINT32 val); -extern UINT32 registerReadStub (UINT32 base, UINT32 offset); - -#define REG_WRITE(b,o,v) registerWriteStub(b, o, v) -#define REG_READ(b,o,v) do { v = registerReadStub(b, o); } while (0) -#else -#define REG_WRITE(b,o,v) IX_OSAL_WRITE_LONG((volatile UINT32 *)(b + o), v) -#define REG_READ(b,o,v) (v = IX_OSAL_READ_LONG((volatile UINT32 *)(b + o))) - -#endif - -void ixEthAccMacUnload(void); -IxEthAccStatus ixEthAccMacMemInit(void); - -/* MAC core loopback */ -IxEthAccStatus ixEthAccPortLoopbackEnable(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortLoopbackDisable(IxEthAccPortId portId); - -/* MAC core traffic control */ -IxEthAccStatus ixEthAccPortTxEnablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortTxDisablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortRxEnablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortRxDisablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccPortMacResetPriv(IxEthAccPortId portId); - -/* NPE software loopback */ -IxEthAccStatus ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId); -IxEthAccStatus ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId); - -#endif /*IxEthAccMac_p_H*/ - |