diff options
Diffstat (limited to 'drivers/net/s3c4510b_eth.h')
-rw-r--r-- | drivers/net/s3c4510b_eth.h | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/drivers/net/s3c4510b_eth.h b/drivers/net/s3c4510b_eth.h new file mode 100644 index 0000000000..cbddba71a4 --- /dev/null +++ b/drivers/net/s3c4510b_eth.h @@ -0,0 +1,302 @@ +#ifndef __S3C4510B_ETH_H +#define __S3C4510B_ETH_H +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * MODULE: $Id:$ + * Description: Ethernet interface + * Runtime Env: ARM7TDMI + * Change History: + * 03-02-04 Create (Curt Brune) curt@cucy.com + * + */ + +#define __packed __attribute__ ((packed)) + +#define ETH_MAC_ADDR_SIZE (6) /* dst,src addr is 6bytes each */ +#define ETH_MaxTxFrames (16) /* Max number of Tx Frames */ + +/* Buffered DMA Receiver Control Register */ +#define ETH_BRxBRST 0x0000F /* BDMA Rx Burst Size * BRxBRST */ + /* = Burst Data Size 16 */ +#define ETH_BRxSTSKO 0x00020 /* BDMA Rx Stop/Skip Frame or Interrupt(=1) */ + /* case of not OWNER the current Frame */ +#define ETH_BRxMAINC 0x00040 /* BDMA Rx Memory Address Inc/Dec */ +#define ETH_BRxDIE 0x00080 /* BDMA Rx Every Received Frame Interrupt Enable */ +#define ETH_BRxNLIE 0x00100 /* BDMA Rx NULL List Interrupt Enable */ +#define ETH_BRxNOIE 0x00200 /* BDMA Rx Not Owner Interrupt Enable */ +#define ETH_BRxMSOIE 0x00400 /* BDMA Rx Maximum Size over Interrupr Enable */ +#define ETH_BRxLittle 0x00800 /* BDMA Rx Big/Little Endian */ +#define ETH_BRxBig 0x00000 /* BDMA Rx Big/Little Endian */ +#define ETH_BRxWA01 0x01000 /* BDMA Rx Word Alignment- one invalid byte */ +#define ETH_BRxWA10 0x02000 /* BDMA Rx Word Alignment- two invalid byte */ +#define ETH_BRxWA11 0x03000 /* BDMA Rx Word Alignment- three invalid byte */ +#define ETH_BRxEn 0x04000 /* BDMA Rx Enable */ +#define ETH_BRxRS 0x08000 /* BDMA Rx Reset */ +#define ETH_RxEmpty 0x10000 /* BDMA Rx Buffer empty interrupt */ +#define ETH_BRxEarly 0x20000 /* BDMA Rx Early notify Interrupt */ + +/* Buffered DMA Trasmit Control Register(BDMATXCON) */ +#define ETH_BTxBRST 0x0000F /* BDMA Tx Burst Size = 16 */ +#define ETH_BTxSTSKO 0x00020 /* BDMA Tx Stop/Skip Frame or Interrupt in case */ + /* of not Owner the current frame */ +#define ETH_BTxCPIE 0x00080 /* BDMA Tx Complete to send control */ + /* packet Enable */ +#define ETH_BTxNOIE 0x00200 /* BDMA Tx Buffer Not Owner */ +#define ETH_BTxEmpty 0x00400 /* BDMA Tx Buffer Empty Interrupt */ + +/* BDMA Tx buffer can be moved to the MAC Tx IO when the new frame comes in. */ +#define ETH_BTxMSL000 0x00000 /* No wait to fill the BDMA */ +#define ETH_BTxMSL001 0x00800 /* wait to fill 1/8 of the BDMA */ +#define ETH_BTxMSL010 0x01000 /* wait to fill 2/8 of the BDMA */ +#define ETH_BTxMSL011 0x01800 /* wait to fill 3/8 of the BDMA */ +#define ETH_BTxMSL100 0x02000 /* wait to fill 4/8 of the BDMA */ +#define ETH_BTxMSL101 0x02800 /* wait to fill 5/8 of the BDMA */ +#define ETH_BTxMSL110 0x03000 /* wait to fill 6/8 of the BDMA */ +#define ETH_BTxMSL111 0x03800 /* wait to fill 7/8 of the BDMA */ +#define ETH_BTxEn 0x04000 /* BDMA Tx Enable */ +#define ETH_BTxRS 0x08000 /* BDMA Tx Reset */ + +/* BDMA Status Register */ +#define ETH_S_BRxRDF 0x00001 /* BDMA Rx Done Every Received Frame */ +#define ETH_S_BRxNL 0x00002 /* BDMA Rx NULL List */ +#define ETH_S_BRxNO 0x00004 /* BDMA Rx Not Owner */ +#define ETH_S_BRxMSO 0x00008 /* BDMA Rx Maximum Size Over */ +#define ETH_S_BRxEmpty 0x00010 /* BDMA Rx Buffer Empty */ +#define ETH_S_BRxSEarly 0x00020 /* Early Notify */ +#define ETH_S_BRxFRF 0x00080 /* One more frame data in BDMA receive buffer */ +#define ETH_S_BTxCCP 0x10000 /* BDMA Tx Complete to send Control Packet */ +#define ETH_S_BTxNL 0x20000 /* BDMA Tx Null List */ +#define ETH_S_BTxNO 0x40000 /* BDMA Tx Not Owner */ +#define ETH_S_BTxEmpty 0x100000 /* BDMA Tx Buffer Empty */ + +/* MAC Control Register */ +#define ETH_HaltReg 0x0001 /* stop transmission and reception */ + /* after completion of any current packets */ +#define ETH_HaltImm 0x0002 /* Stop transmission and reception immediately */ +#define ETH_SwReset 0x0004 /* reset all Ethernet controller state machines */ + /* and FIFOs */ +#define ETH_FullDup 0x0008 /* allow transmission to begin while reception */ + /* is occurring */ +#define ETH_MACLoop 0x0010 /* MAC loopback */ +#define ETH_ConnM00 0x0000 /* Automatic-default */ +#define ETH_ConnM01 0x0020 /* Force 10Mbits endec */ +#define ETH_ConnM10 0x0040 /* Force MII (rate determined by MII clock */ +#define ETH_MIIOFF 0x0040 /* Force MII (rate determined by MII clock */ +#define ETH_Loop10 0x0080 /* Loop 10Mbps */ +#define ETH_MissRoll 0x0400 /* Missed error counter rolled over */ +#define ETH_MDCOFF 0x1000 /* MII Station Management Clock Off */ +#define ETH_EnMissRoll 0x2000 /* Interrupt when missed error counter rolls */ + /* over */ +#define ETH_Link10 0x8000 /* Link status 10Mbps */ + +/* CAM control register(CAMCON) */ +#define ETH_StationAcc 0x0001 /* Accept any packet with a unicast station */ + /* address */ +#define ETH_GroupAcc 0x0002 /* Accept any packet with multicast-group */ + /* station address */ +#define ETH_BroadAcc 0x0004 /* Accept any packet with a broadcast station */ + /* address */ +#define ETH_NegCAM 0x0008 /* 0: Accept packets CAM recognizes, */ + /* reject others */ + /* 1: reject packets CAM recognizes, */ + /* accept others */ +#define ETH_CompEn 0x0010 /* Compare Enable mode */ + +/* Transmit Control Register(MACTXCON) */ +#define ETH_TxEn 0x0001 /* transmit Enable */ +#define ETH_TxHalt 0x0002 /* Transmit Halt Request */ +#define ETH_NoPad 0x0004 /* suppress Padding */ +#define ETH_NoCRC 0x0008 /* Suppress CRC */ +#define ETH_FBack 0x0010 /* Fast Back-off */ +#define ETH_NoDef 0x0020 /* Disable the defer counter */ +#define ETH_SdPause 0x0040 /* Send Pause */ +#define ETH_MII10En 0x0080 /* MII 10Mbps mode enable */ +#define ETH_EnUnder 0x0100 /* Enable Underrun */ +#define ETH_EnDefer 0x0200 /* Enable Deferral */ +#define ETH_EnNCarr 0x0400 /* Enable No Carrier */ +#define ETH_EnExColl 0x0800 /* interrupt if 16 collision occur */ + /* in the same packet */ +#define ETH_EnLateColl 0x1000 /* interrupt if collision occurs after */ + /* 512 bit times(64 bytes times) */ +#define ETH_EnTxPar 0x2000 /* interrupt if the MAC transmit FIFO */ + /* has a parity error */ +#define ETH_EnComp 0x4000 /* interrupt when the MAC transmits or */ + /* discards one packet */ + +/* Transmit Status Register(MACTXSTAT) */ +#define ETH_ExColl 0x0010 /* Excessive collision */ +#define ETH_TxDeffered 0x0020 /* set if 16 collisions occur for same packet */ +#define ETH_Paused 0x0040 /* packet waited because of pause during */ + /* transmission */ +#define ETH_IntTx 0x0080 /* set if transmission of packet causes an */ + /* interrupt condiftion */ +#define ETH_Under 0x0100 /* MAC transmit FIFO becomes empty during */ + /* transmission */ +#define ETH_Defer 0x0200 /* MAC defers for MAC deferral */ +#define ETH_NCarr 0x0400 /* No carrier sense detected during the */ + /* transmission of a packet */ +#define ETH_SQE 0x0800 /* Signal Quality Error */ +#define ETH_LateColl 0x1000 /* a collision occures after 512 bit times */ +#define ETH_TxPar 0x2000 /* MAC transmit FIFO has detected a parity error */ +#define ETH_Comp 0x4000 /* MAC transmit or discards one packet */ +#define ETH_TxHalted 0x8000 /* Transmission was halted by clearing */ + /* TxEn or Halt immedite */ + +/* Receive Control Register (MACRXCON) */ +#define ETH_RxEn 0x0001 +#define ETH_RxHalt 0x0002 +#define ETH_LongEn 0x0004 +#define ETH_ShortEn 0x0008 +#define ETH_StripCRC 0x0010 +#define ETH_PassCtl 0x0020 +#define ETH_IgnoreCRC 0x0040 +#define ETH_EnAlign 0x0100 +#define ETH_EnCRCErr 0x0200 +#define ETH_EnOver 0x0400 +#define ETH_EnLongErr 0x0800 +#define ETH_EnRxPar 0x2000 +#define ETH_EnGood 0x4000 + +/* Receive Status Register(MACRXSTAT) */ +#define ETH_MCtlRecd 0x0020 +#define ETH_MIntRx 0x0040 +#define ETH_MRx10Stat 0x0080 +#define ETH_MAllignErr 0x0100 +#define ETH_MCRCErr 0x0200 +#define ETH_MOverflow 0x0400 +#define ETH_MLongErr 0x0800 +#define ETH_MRxPar 0x2000 +#define ETH_MRxGood 0x4000 +#define ETH_MRxHalted 0x8000 + +/* type of ethernet packets */ +#define ETH_TYPE_ARP (0x0806) +#define ETH_TYPE_IP (0x0800) + +#define ETH_HDR_SIZE (14) + +/* bit field for frame data pointer word */ +typedef struct __BF_FrameDataPtr { + u32 dataPtr:31; + u32 owner: 1; +} BF_FrameDataPtr; + +typedef union _FrameDataPtr { + u32 ui; + BF_FrameDataPtr bf; +} FrameDataPtr; + +typedef struct __BF_TX_Options { + u32 no_padding: 1; + u32 no_crc: 1; + u32 macTxIrqEnbl: 1; + u32 littleEndian: 1; + u32 frameDataDir: 1; + u32 widgetAlign: 2; + u32 reserved:25; +} BF_TX_Options; + +typedef union _TX_Options { + u32 ui; + BF_TX_Options bf; +} TX_Options; + +typedef struct __BF_RX_Status { + u32 len:16; /* frame length */ + u32 reserved1: 3; + u32 overMax: 1; + u32 reserved2: 1; + u32 ctrlRcv: 1; + u32 intRx: 1; + u32 rx10stat: 1; + u32 alignErr: 1; + u32 crcErr: 1; + u32 overFlow: 1; + u32 longErr: 1; + u32 reserved3: 1; + u32 parityErr: 1; + u32 good: 1; + u32 halted: 1; +} BF_RX_Status; + +typedef union _RX_Status { + u32 ui; + BF_RX_Status bf; +} RX_Status; + +typedef struct __BF_TX_Status { + u32 len:16; /* frame length */ + u32 txCollCnt: 4; + u32 exColl: 1; + u32 txDefer: 1; + u32 paused: 1; + u32 intTx: 1; + u32 underRun: 1; + u32 defer: 1; + u32 noCarrier: 1; + u32 SQErr: 1; + u32 lateColl: 1; + u32 parityErr: 1; + u32 complete: 1; + u32 halted: 1; +} BF_TX_Status; + +typedef union _TX_Status { + u32 ui; + BF_TX_Status bf; +} TX_Status; + +/* TX descriptor structure */ +typedef struct __TX_FrameDescriptor { + volatile FrameDataPtr m_frameDataPtr; + TX_Options m_opt; + volatile TX_Status m_status; + struct __TX_FrameDescriptor *m_nextFD; +} TX_FrameDescriptor; + +/* RX descriptor structure */ +typedef struct __RX_FrameDescriptor { + volatile FrameDataPtr m_frameDataPtr; + u32 m_reserved; + volatile RX_Status m_status; + struct __RX_FrameDescriptor *m_nextFD; +} RX_FrameDescriptor; + +/* MAC Frame Structure */ +typedef struct __MACFrame { + u8 m_dstAddr[6] __packed; + u8 m_srcAddr[6] __packed; + u16 m_lengthOrType __packed; + u8 m_payload[1506] __packed; +} MACFrame; + +/* Ethernet Control block */ +typedef struct __ETH { + TX_FrameDescriptor *m_curTX_FD; /* pointer to current TX frame descriptor */ + TX_FrameDescriptor *m_baseTX_FD; /* pointer to base TX frame descriptor */ + RX_FrameDescriptor *m_curRX_FD; /* pointer to current RX frame descriptor */ + RX_FrameDescriptor *m_baseRX_FD; /* pointer to base RX frame descriptor */ + u8 *m_mac; /* pointer to our MAC address */ +} ETH; + +#endif |