diff options
Diffstat (limited to 'drivers/net/sh_eth.c')
| -rw-r--r-- | drivers/net/sh_eth.c | 51 |
1 files changed, 40 insertions, 11 deletions
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index d5a83e0bf5..5e132f2b53 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -4,6 +4,7 @@ * Copyright (C) 2008, 2011 Renesas Solutions Corp. * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com> + * Copyright (C) 2013 Renesas Electronics Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -25,13 +26,31 @@ #ifndef CONFIG_SH_ETHER_PHY_ADDR # error "Please define CONFIG_SH_ETHER_PHY_ADDR" #endif -#ifdef CONFIG_SH_ETHER_CACHE_WRITEBACK -#define flush_cache_wback(addr, len) \ - dcache_wback_range((u32)addr, (u32)(addr + len - 1)) + +#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF) +#define flush_cache_wback(addr, len) \ + flush_dcache_range((u32)addr, (u32)(addr + len - 1)) #else #define flush_cache_wback(...) #endif +#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM) +#define invalidate_cache(addr, len) \ + { \ + u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE; \ + u32 start, end; \ + \ + start = (u32)addr; \ + end = start + len; \ + start &= ~(line_size - 1); \ + end = ((end + line_size - 1) & ~(line_size - 1)); \ + \ + invalidate_dcache_range(start, end); \ + } +#else +#define invalidate_cache(...) +#endif + #define TIMEOUT_CNT 1000 int sh_eth_send(struct eth_device *dev, void *packet, int len) @@ -69,8 +88,11 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len) /* Wait until packet is transmitted */ timeout = TIMEOUT_CNT; - while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--) + do { + invalidate_cache(port_info->tx_desc_cur, + sizeof(struct tx_desc_s)); udelay(100); + } while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--); if (timeout < 0) { printf(SHETHER_NAME ": transmit timeout\n"); @@ -94,12 +116,14 @@ int sh_eth_recv(struct eth_device *dev) uchar *packet; /* Check if the rx descriptor is ready */ + invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s)); if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) { /* Check for errors */ if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) { len = port_info->rx_desc_cur->rd1 & 0xffff; packet = (uchar *) ADDR_TO_P2(port_info->rx_desc_cur->rd2); + invalidate_cache(packet, len); NetReceive(packet, len); } @@ -108,7 +132,6 @@ int sh_eth_recv(struct eth_device *dev) port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE; else port_info->rx_desc_cur->rd0 = RD_RACT; - /* Point to the next descriptor */ port_info->rx_desc_cur++; if (port_info->rx_desc_cur >= @@ -237,15 +260,17 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) * Allocate rx data buffers. They must be 32 bytes aligned and in * P2 area */ - port_info->rx_buf_malloc = malloc(NUM_RX_DESC * MAX_BUF_SIZE + 31); + port_info->rx_buf_malloc = malloc( + NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1); if (!port_info->rx_buf_malloc) { printf(SHETHER_NAME ": malloc failed\n"); ret = -ENOMEM; goto err_buf_malloc; } - tmp_addr = (u32)(((int)port_info->rx_buf_malloc + (32 - 1)) & - ~(32 - 1)); + tmp_addr = (u32)(((int)port_info->rx_buf_malloc + + (RX_BUF_ALIGNE_SIZE - 1)) & + ~(RX_BUF_ALIGNE_SIZE - 1)); port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); /* Initialize all descriptors */ @@ -351,8 +376,9 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) struct phy_device *phy; /* Configure e-dmac registers */ - sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | EDMR_EL, - EDMR); + sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) | + (EMDR_DESC | EDMR_EL), EDMR); + sh_eth_write(eth, 0, EESIPR); sh_eth_write(eth, 0, TRSCER); sh_eth_write(eth, 0, TFTR); @@ -384,6 +410,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740) sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII); +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) + sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR); #endif /* Configure phy */ ret = sh_eth_phy_config(eth); @@ -407,7 +435,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) sh_eth_write(eth, GECMR_100B, GECMR); #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 1, RTRATE); -#elif defined(CONFIG_CPU_SH7724) +#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \ + defined(CONFIG_R8A7791) val = ECMR_RTM; #endif } else if (phy->speed == 10) { |