diff options
Diffstat (limited to 'drivers/net/sk98lin/skge.c')
| -rw-r--r-- | drivers/net/sk98lin/skge.c | 80 |
1 files changed, 40 insertions, 40 deletions
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 61a6094230..e1d7e8720c 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -3,7 +3,7 @@ * Name: skge.c * Project: GEnesis, PCI Gigabit Ethernet Adapter * Version: $Revision: 1.46 $ - * Date: $Date: 2003/02/25 14:16:36 $ + * Date: $Date: 2003/02/25 14:16:36 $ * Purpose: The main driver source module * ******************************************************************************/ @@ -348,7 +348,7 @@ #if 0 #include <linux/module.h> #include <linux/init.h> -#include <linux/proc_fs.h> +#include <linux/proc_fs.h> #endif #include "h/skdrv1st.h" #include "h/skdrv2nd.h" @@ -501,7 +501,7 @@ static struct pci_device_id supported[] = { /***************************************************************************** * - * skge_probe - find all SK-98xx adapters + * skge_probe - find all SK-98xx adapters * * Description: * This function scans the PCI bus for SK-98xx adapters. Resources for @@ -646,7 +646,7 @@ int skge_probe (struct eth_device ** ret_dev) dev->set_mac_address = &SkGeSetMacAddr; dev->do_ioctl = &SkGeIoctl; dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; + dev->flags &= ~IFF_RUNNING; #endif #ifdef SK_ZEROCOPY @@ -793,7 +793,7 @@ int skge_probe (struct eth_device ** ret_dev) dev->set_mac_address = &SkGeSetMacAddr; dev->do_ioctl = &SkGeIoctl; dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; + dev->flags &= ~IFF_RUNNING; #endif #ifdef SK_ZEROCOPY @@ -857,7 +857,7 @@ int skge_probe (struct eth_device ** ret_dev) /***************************************************************************** * - * FreeResources - release resources allocated for adapter + * FreeResources - release resources allocated for adapter * * Description: * This function releases the IRQ, unmaps the IO and @@ -992,7 +992,7 @@ static int options[SK_MAX_CARD_PARAM] = {0, }; /* not used */ /***************************************************************************** * - * skge_init_module - module initialization function + * skge_init_module - module initialization function * * Description: * Very simple, only call skge_probe and return approriate result. @@ -1020,7 +1020,7 @@ static int __init skge_init_module(void) /***************************************************************************** * - * skge_cleanup_module - module unload function + * skge_cleanup_module - module unload function * * Description: * Disable adapter if it is still running, free resources, @@ -1098,7 +1098,7 @@ module_exit(skge_cleanup_module); /***************************************************************************** * - * SkGeBoardInit - do level 0 and 1 initialization + * SkGeBoardInit - do level 0 and 1 initialization * * Description: * This function prepares the board hardware for running. The desriptor @@ -1262,7 +1262,7 @@ SK_BOOL DualNet; /***************************************************************************** * - * BoardAllocMem - allocate the memory for the descriptor rings + * BoardAllocMem - allocate the memory for the descriptor rings * * Description: * This function allocates the memory for all descriptor rings. @@ -1360,7 +1360,7 @@ size_t AllocLength; /* length of complete descriptor area */ /***************************************************************************** * - * BoardInitMem - initiate the descriptor rings + * BoardInitMem - initiate the descriptor rings * * Description: * This function sets the descriptor rings up in memory. @@ -1408,7 +1408,7 @@ int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/ /***************************************************************************** * - * SetupRing - create one descriptor ring + * SetupRing - create one descriptor ring * * Description: * This function creates one descriptor ring in the given memory area. @@ -1477,7 +1477,7 @@ uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ /***************************************************************************** * - * PortReInitBmu - re-initiate the descriptor rings for one port + * PortReInitBmu - re-initiate the descriptor rings for one port * * Description: * This function reinitializes the descriptor rings of one port @@ -1998,7 +1998,7 @@ struct SK_NET_DEVICE *dev) /***************************************************************************** * - * SkGeXmit - Linux frame transmit function + * SkGeXmit - Linux frame transmit function * * Description: * The system calls this function to send frames onto the wire. @@ -2078,7 +2078,7 @@ int Rc; /* return code of XmitFrame */ /***************************************************************************** * - * XmitFrame - fill one socket buffer into the transmit ring + * XmitFrame - fill one socket buffer into the transmit ring * * Description: * This function puts a message into the transmit descriptor ring @@ -2099,7 +2099,7 @@ int Rc; /* return code of XmitFrame */ * < 0 - on failure: other problems ( -> return failure to upper layers) */ static int XmitFrame( -SK_AC *pAC, /* pointer to adapter context */ +SK_AC *pAC, /* pointer to adapter context */ TX_PORT *pTxPort, /* pointer to struct of port to send to */ struct sk_buff *pMessage) /* pointer to send-message */ { @@ -2186,7 +2186,7 @@ int BytesSend; /***************************************************************************** * - * XmitFrameSG - fill one socket buffer into the transmit ring + * XmitFrameSG - fill one socket buffer into the transmit ring * (use SG and TCP/UDP hardware checksumming) * * Description: @@ -2201,12 +2201,12 @@ int BytesSend; */ #if 0 static int XmitFrameSG( -SK_AC *pAC, /* pointer to adapter context */ +SK_AC *pAC, /* pointer to adapter context */ TX_PORT *pTxPort, /* pointer to struct of port to send to */ struct sk_buff *pMessage) /* pointer to send-message */ { - int i; + int i; int BytesSend; int hlength; int protocol; @@ -2374,7 +2374,7 @@ void dump_frag( SK_U8 *data, int length) /***************************************************************************** * - * FreeTxDescriptors - release descriptors from the descriptor ring + * FreeTxDescriptors - release descriptors from the descriptor ring * * Description: * This function releases descriptors from a transmit ring if they @@ -2444,7 +2444,7 @@ SK_U64 PhysAddr; /* address of DMA mapping */ /***************************************************************************** * - * FillRxRing - fill the receive ring with valid descriptors + * FillRxRing - fill the receive ring with valid descriptors * * Description: * This function fills the receive ring descriptors with data @@ -2476,7 +2476,7 @@ unsigned long Flags; /***************************************************************************** * - * FillRxDescriptor - fill one buffer into the receive ring + * FillRxDescriptor - fill one buffer into the receive ring * * Description: * The function allocates a new receive buffer and @@ -2532,7 +2532,7 @@ SK_U64 PhysAddr; /* physical address of a rx buffer */ /***************************************************************************** * - * ReQueueRxBuffer - fill one buffer back into the receive ring + * ReQueueRxBuffer - fill one buffer back into the receive ring * * Description: * Fill a given buffer back into the rx ring. The buffer @@ -2566,7 +2566,7 @@ SK_U16 Length; /* data fragment length */ /***************************************************************************** * - * ReceiveIrq - handle a receive IRQ + * ReceiveIrq - handle a receive IRQ * * Description: * This function is called when a receive IRQ is set. @@ -2598,7 +2598,7 @@ unsigned int NumBytes; unsigned int ForRlmt; SK_BOOL IsBc; SK_BOOL IsMc; -SK_BOOL IsBadFrame; /* Bad frame */ +SK_BOOL IsBadFrame; /* Bad frame */ SK_U32 FrameStat; unsigned short Csum1; @@ -2935,7 +2935,7 @@ rx_failed: /***************************************************************************** * - * ClearAndStartRx - give a start receive command to BMU, clear IRQ + * ClearAndStartRx - give a start receive command to BMU, clear IRQ * * Description: * This function sends a start command and a clear interrupt @@ -2955,7 +2955,7 @@ int PortIndex) /* index of the receive port (XMAC) */ /***************************************************************************** * - * ClearTxIrq - give a clear transmit IRQ command to BMU + * ClearTxIrq - give a clear transmit IRQ command to BMU * * Description: * This function sends a clear tx IRQ command for one @@ -2975,7 +2975,7 @@ int Prio) /* priority or normal queue */ /***************************************************************************** * - * ClearRxRing - remove all buffers from the receive ring + * ClearRxRing - remove all buffers from the receive ring * * Description: * This function removes all receive buffers from the ring. @@ -3052,7 +3052,7 @@ unsigned long Flags; #if 0 /***************************************************************************** * - * SetQueueSizes - configure the sizes of rx and tx queues + * SetQueueSizes - configure the sizes of rx and tx queues * * Description: * This function assigns the sizes for active and passive port @@ -3145,7 +3145,7 @@ if (pAC->RlmtNets == 1) { /***************************************************************************** * - * SkGeSetMacAddr - Set the hardware MAC address + * SkGeSetMacAddr - Set the hardware MAC address * * Description: * This function sets the MAC address used by the adapter. @@ -3188,7 +3188,7 @@ unsigned long Flags; /***************************************************************************** * - * SkGeSetRxMode - set receive mode + * SkGeSetRxMode - set receive mode * * Description: * This function sets the receive mode of an adapter. The adapter @@ -3264,7 +3264,7 @@ unsigned long Flags; /***************************************************************************** * - * SkGeChangeMtu - set the MTU to another value + * SkGeChangeMtu - set the MTU to another value * * Description: * This function sets is called whenever the MTU size is changed @@ -3282,7 +3282,7 @@ DEV_NET *pOtherNet; SK_AC *pAC; unsigned long Flags; int i; -SK_EVPARA EvPara; +SK_EVPARA EvPara; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, ("SkGeChangeMtu starts now...\n")); @@ -3487,7 +3487,7 @@ SK_EVPARA EvPara; /***************************************************************************** * - * SkGeStats - return ethernet device statistics + * SkGeStats - return ethernet device statistics * * Description: * This function return statistic data about the ethernet device @@ -3560,7 +3560,7 @@ unsigned long Flags; /* for spin lock */ /***************************************************************************** * - * SkGeIoctl - IO-control function + * SkGeIoctl - IO-control function * * Description: * This function is called if an ioctl is issued on the device. @@ -3619,7 +3619,7 @@ int Size; /***************************************************************************** * - * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message + * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message * * Description: * This function reads/writes the MIB data using PNMI (Private Network @@ -3673,7 +3673,7 @@ SK_AC *pAC; /***************************************************************************** * - * GetConfiguration - read configuration information + * GetConfiguration - read configuration information * * Description: * This function reads per-adapter configuration information from @@ -3717,7 +3717,7 @@ int Capabilities[3][3] = /* settings for port A */ /* settings link speed */ - LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */ + LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */ if (Speed_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && Speed_A[pAC->Index] != NULL) { if (strcmp(Speed_A[pAC->Index],"")==0) { @@ -3876,7 +3876,7 @@ int Capabilities[3][3] = /* settings for port B */ /* settings link speed */ - LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */ + LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */ if (Speed_B != NULL && pAC->Index<SK_MAX_CARD_PARAM && Speed_B[pAC->Index] != NULL) { if (strcmp(Speed_B[pAC->Index],"")==0) { @@ -4100,7 +4100,7 @@ int Capabilities[3][3] = /***************************************************************************** * - * ProductStr - return a adapter identification string from vpd + * ProductStr - return a adapter identification string from vpd * * Description: * This function reads the product name string from the vpd area |