diff options
Diffstat (limited to 'drivers/net')
150 files changed, 69488 insertions, 0 deletions
diff --git a/drivers/net/npe/IxEthAcc.c b/drivers/net/npe/IxEthAcc.c new file mode 100644 index 0000000000..20d3d9e9b1 --- /dev/null +++ b/drivers/net/npe/IxEthAcc.c @@ -0,0 +1,261 @@ +/** + * @file IxEthAcc.c + * + * @author Intel Corporation + * @date 20-Feb-2001 + * + * @brief This file contains the implementation of the IXP425 Ethernet Access Component + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + + +#include "IxEthAcc.h" +#ifdef CONFIG_IXP425_COMPONENT_ETHDB +#include "IxEthDB.h" +#endif +#include "IxFeatureCtrl.h" + +#include "IxEthAcc_p.h" +#include "IxEthAccMac_p.h" +#include "IxEthAccMii_p.h" + +/** + * @addtogroup IxEthAcc + *@{ + */ + + +/** + * @brief System-wide information data strucure. + * + * @ingroup IxEthAccPri + * + */ + +IxEthAccInfo ixEthAccDataInfo; +extern PUBLIC IxEthAccMacState ixEthAccMacState[]; +extern PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex; + +/** + * @brief System-wide information + * + * @ingroup IxEthAccPri + * + */ +BOOL ixEthAccServiceInit = FALSE; + +/* global filtering bit mask */ +PUBLIC UINT32 ixEthAccNewSrcMask; + +/** + * @brief Per port information data strucure. + * + * @ingroup IxEthAccPri + * + */ + +IxEthAccPortDataInfo ixEthAccPortData[IX_ETH_ACC_NUMBER_OF_PORTS]; + +PUBLIC IxEthAccStatus ixEthAccInit() +{ +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + /* + * Initialize Control plane + */ + if (ixEthDBInit() != IX_ETH_DB_SUCCESS) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccInit: EthDB init failed\n", 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } +#endif + + if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING)) + { + ixEthAccNewSrcMask = (~0); /* want all the bits */ + } + else + { + ixEthAccNewSrcMask = (~IX_ETHACC_NE_NEWSRCMASK); /* want all but the NewSrc bit */ + } + + /* + * Initialize Data plane + */ + if ( ixEthAccInitDataPlane() != IX_ETH_ACC_SUCCESS ) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccInit: data plane init failed\n", 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } + + + if ( ixEthAccQMgrQueuesConfig() != IX_ETH_ACC_SUCCESS ) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccInit: queue config failed\n", 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } + + /* + * Initialize MII + */ + if ( ixEthAccMiiInit() != IX_ETH_ACC_SUCCESS ) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Mii init failed\n", 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } + + /* + * Initialize MAC I/O memory + */ + if (ixEthAccMacMemInit() != IX_ETH_ACC_SUCCESS) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Mac init failed\n", 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } + + /* + * Initialize control plane interface lock + */ + if (ixOsalMutexInit(&ixEthAccControlInterfaceMutex) != IX_SUCCESS) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccInit: Control plane interface lock initialization failed\n", 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } + + /* initialiasation is complete */ + ixEthAccServiceInit = TRUE; + + return IX_ETH_ACC_SUCCESS; + +} + +PUBLIC void ixEthAccUnload(void) +{ + IxEthAccPortId portId; + + if ( IX_ETH_ACC_IS_SERVICE_INITIALIZED() ) + { + /* check none of the port is still active */ + for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + if ( IX_ETH_IS_PORT_INITIALIZED(portId) ) + { + if (ixEthAccMacState[portId].portDisableState == ACTIVE) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccUnload: port %u still active, bail out\n", portId, 0, 0, 0, 0, 0); + return; + } + } + } + + /* unmap the memory areas */ + ixEthAccMiiUnload(); + ixEthAccMacUnload(); + + /* set all ports as uninitialized */ + for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + ixEthAccPortData[portId].portInitialized = FALSE; + } + + /* uninitialize the service */ + ixEthAccServiceInit = FALSE; + } +} + +PUBLIC IxEthAccStatus ixEthAccPortInit( IxEthAccPortId portId) +{ + + IxEthAccStatus ret=IX_ETH_ACC_SUCCESS; + + if ( ! IX_ETH_ACC_IS_SERVICE_INITIALIZED() ) + { + return(IX_ETH_ACC_FAIL); + } + + /* + * Check for valid port + */ + + if ( ! IX_ETH_ACC_IS_PORT_VALID(portId) ) + { + return (IX_ETH_ACC_INVALID_PORT); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Eth port.\n",(INT32) portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if ( IX_ETH_IS_PORT_INITIALIZED(portId) ) + { + /* Already initialized */ + return(IX_ETH_ACC_FAIL); + } + + if(ixEthAccMacInit(portId)!=IX_ETH_ACC_SUCCESS) + { + return IX_ETH_ACC_FAIL; + } + + /* + * Set the port init flag. + */ + + ixEthAccPortData[portId].portInitialized = TRUE; + +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + /* init learning/filtering database structures for this port */ + ixEthDBPortInit(portId); +#endif + + return(ret); +} + + diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c new file mode 100644 index 0000000000..211203dffd --- /dev/null +++ b/drivers/net/npe/IxEthAccCommon.c @@ -0,0 +1,1049 @@ +/** + * @file IxEthAccCommon.c + * + * @author Intel Corporation + * @date 12-Feb-2002 + * + * @brief This file contains the implementation common support routines for the component + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* + * Component header files + */ + +#include "IxOsal.h" +#include "IxEthAcc.h" +#include "IxEthDB.h" +#include "IxNpeMh.h" +#include "IxEthDBPortDefs.h" +#include "IxFeatureCtrl.h" +#include "IxEthAcc_p.h" +#include "IxEthAccQueueAssign_p.h" + +#include "IxEthAccDataPlane_p.h" +#include "IxEthAccMii_p.h" + +/** + * @addtogroup IxEthAccPri + *@{ + */ + +extern IxEthAccInfo ixEthAccDataInfo; + +/** + * + * @brief Maximum number of RX queues set to be the maximum number + * of traffic calsses. + * + */ +#define IX_ETHACC_MAX_RX_QUEUES \ + (IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY \ + - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY \ + + 1) + +/** + * + * @brief Maximum number of 128 entry RX queues + * + */ +#define IX_ETHACC_MAX_LARGE_RX_QUEUES 4 + +/** + * + * @brief Data structure template for Default RX Queues + * + */ +IX_ETH_ACC_PRIVATE +IxEthAccQregInfo ixEthAccQmgrRxDefaultTemplate = + { + IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */ + "Eth Rx Q", + ixEthRxFrameQMCallback, /**< Functional callback */ + (IxQMgrCallbackId) 0, /**< Callback tag */ + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + TRUE, /**< Enable Q notification at startup */ + IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */ + }; + +/** + * + * @brief Data structure template for Small RX Queues + * + */ +IX_ETH_ACC_PRIVATE +IxEthAccQregInfo ixEthAccQmgrRxSmallTemplate = + { + IX_ETH_ACC_RX_FRAME_ETH_Q, /**< Queue ID */ + "Eth Rx Q", + ixEthRxFrameQMCallback, /**< Functional callback */ + (IxQMgrCallbackId) 0, /**< Callback tag */ + IX_QMGR_Q_SIZE64, /**< Allocate Smaller Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + TRUE, /**< Enable Q notification at startup */ + IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE,/**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL1, /**< Q High water mark - needed by NPE */ + }; + + +/** + * + * @brief Data structure used to register & initialize the Queues + * + */ +IX_ETH_ACC_PRIVATE +IxEthAccQregInfo ixEthAccQmgrStaticInfo[]= +{ + { + IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q, + "Eth Rx Fr Q 1", + ixEthRxFreeQMCallback, + (IxQMgrCallbackId) IX_ETH_PORT_1, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + FALSE, /**< Disable Q notification at startup */ + IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE, /**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /***< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ + }, + + { + IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q, + "Eth Rx Fr Q 2", + ixEthRxFreeQMCallback, + (IxQMgrCallbackId) IX_ETH_PORT_2, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + FALSE, /**< Disable Q notification at startup */ + IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE, /**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ + }, +#ifdef __ixp46X + { + IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q, + "Eth Rx Fr Q 3", + ixEthRxFreeQMCallback, + (IxQMgrCallbackId) IX_ETH_PORT_3, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + FALSE, /**< Disable Q notification at startup */ + IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE, /**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ + }, +#endif + { + IX_ETH_ACC_TX_FRAME_ENET0_Q, + "Eth Tx Q 1", + ixEthTxFrameQMCallback, + (IxQMgrCallbackId) IX_ETH_PORT_1, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + FALSE, /**< Disable Q notification at startup */ + IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE, /**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ + }, + + { + IX_ETH_ACC_TX_FRAME_ENET1_Q, + "Eth Tx Q 2", + ixEthTxFrameQMCallback, + (IxQMgrCallbackId) IX_ETH_PORT_2, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + FALSE, /**< Disable Q notification at startup */ + IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE, /**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL64, /**< Q High water mark */ + }, +#ifdef __ixp46X + { + IX_ETH_ACC_TX_FRAME_ENET2_Q, + "Eth Tx Q 3", + ixEthTxFrameQMCallback, + (IxQMgrCallbackId) IX_ETH_PORT_3, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /** Queue Entry Sizes - all Q entries are single ord entries */ + FALSE, /** Disable Q notification at startup */ + IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE, /** Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /* No queues use almost empty */ + IX_QMGR_Q_WM_LEVEL64, /** Q High water mark - needed used */ + }, +#endif + { + IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, + "Eth Tx Done Q", + ixEthTxFrameDoneQMCallback, + (IxQMgrCallbackId) 0, + IX_QMGR_Q_SIZE128, /**< Allocate Max Size Q */ + IX_QMGR_Q_ENTRY_SIZE1, /**< Queue Entry Sizes - all Q entries are single word entries */ + TRUE, /**< Enable Q notification at startup */ + IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE, /**< Q Condition to drive callback */ + IX_QMGR_Q_WM_LEVEL0, /**< Q Low water mark */ + IX_QMGR_Q_WM_LEVEL2, /**< Q High water mark - needed by NPE */ + }, + + { /* Null Termination entry + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + } + +}; + +/** + * + * @brief Data structure used to register & initialize the Queues + * + * The structure will be filled at run time depending on the NPE + * image already loaded and the QoS configured in ethDB. + * + */ +IX_ETH_ACC_PRIVATE +IxEthAccQregInfo ixEthAccQmgrRxQueuesInfo[IX_ETHACC_MAX_RX_QUEUES+1]= +{ + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* PlaceHolder for rx queues + * depending on the QoS configured + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + }, + + { /* Null Termination entry + */ + (IxQMgrQId)0, + (char *) NULL, + (IxQMgrCallback) NULL, + (IxQMgrCallbackId) 0, + 0, + 0, + 0, + 0, + 0, + 0 + } + +}; + +/* forward declarations */ +IX_ETH_ACC_PRIVATE IxEthAccStatus +ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes); + +/** + * @fn ixEthAccQMgrQueueSetup(void) + * + * @brief Setup one queue and its event, and register the callback required + * by this component to the QMgr + * + * @internal + */ +IX_ETH_ACC_PRIVATE IxEthAccStatus +ixEthAccQMgrQueueSetup(IxEthAccQregInfo *qInfoDes) +{ + /* + * Configure each Q. + */ + if ( ixQMgrQConfig( qInfoDes->qName, + qInfoDes->qId, + qInfoDes->qSize, + qInfoDes->qWords) != IX_SUCCESS) + { + return IX_ETH_ACC_FAIL; + } + + if ( ixQMgrWatermarkSet( qInfoDes->qId, + qInfoDes->AlmostEmptyThreshold, + qInfoDes->AlmostFullThreshold + ) != IX_SUCCESS) + { + return IX_ETH_ACC_FAIL; + } + + /* + * Set dispatcher priority. + */ + if ( ixQMgrDispatcherPrioritySet( qInfoDes->qId, + IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY) + != IX_SUCCESS) + { + return IX_ETH_ACC_FAIL; + } + + /* + * Register callbacks for each Q. + */ + if ( ixQMgrNotificationCallbackSet(qInfoDes->qId, + qInfoDes->qCallback, + qInfoDes->callbackTag) + != IX_SUCCESS ) + { + return IX_ETH_ACC_FAIL; + } + + /* + * Set notification condition for Q + */ + if ( qInfoDes->qNotificationEnableAtStartup == TRUE ) + { + if ( ixQMgrNotificationEnable(qInfoDes->qId, + qInfoDes->qConditionSource) + != IX_SUCCESS ) + { + return IX_ETH_ACC_FAIL; + } + } + + return(IX_ETH_ACC_SUCCESS); +} + +/** + * @fn ixEthAccQMgrQueuesConfig(void) + * + * @brief Setup all the queues and register all callbacks required + * by this component to the QMgr + * + * The RxFree queues, tx queues, rx queues are configured statically + * + * Rx queues configuration is driven by QoS setup. + * Many Rx queues may be required when QoS is enabled (this depends + * on IxEthDB setup and the images being downloaded). The configuration + * of the rxQueues is done in many steps as follows: + * + * @li select all Rx queues as configured by ethDB for all ports + * @li sort the queues by traffic class + * @li build the priority dependency for all queues + * @li fill the configuration for all rx queues + * @li configure all statically configured queues + * @li configure all dynamically configured queues + * + * @param none + * + * @return IxEthAccStatus + * + * @internal + */ +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccQMgrQueuesConfig(void) +{ + struct + { + int npeCount; + UINT32 npeId; + IxQMgrQId qId; + IxEthDBProperty trafficClass; + } rxQueues[IX_ETHACC_MAX_RX_QUEUES]; + + UINT32 rxQueue = 0; + UINT32 rxQueueCount = 0; + IxQMgrQId ixQId =IX_QMGR_MAX_NUM_QUEUES; + IxEthDBStatus ixEthDBStatus = IX_ETH_DB_SUCCESS; + IxEthDBPortId ixEthDbPortId = 0; + IxEthAccPortId ixEthAccPortId = 0; + UINT32 ixNpeId = 0; + UINT32 ixHighestNpeId = 0; + UINT32 sortIterations = 0; + IxEthAccStatus ret = IX_ETH_ACC_SUCCESS; + IxEthAccQregInfo *qInfoDes = NULL; + IxEthDBProperty ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; + IxEthDBPropertyType ixEthDBPropertyType = IX_ETH_DB_INTEGER_PROPERTY; + UINT32 ixEthDBParameter = 0; + BOOL completelySorted = FALSE; + + /* Fill the corspondance between ports and queues + * This defines the mapping from port to queue Ids. + */ + + ixEthAccPortData[IX_ETH_PORT_1].ixEthAccRxData.rxFreeQueue + = IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q; + ixEthAccPortData[IX_ETH_PORT_2].ixEthAccRxData.rxFreeQueue + = IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q; +#ifdef __ixp46X + ixEthAccPortData[IX_ETH_PORT_3].ixEthAccRxData.rxFreeQueue + = IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q; +#endif + ixEthAccPortData[IX_ETH_PORT_1].ixEthAccTxData.txQueue + = IX_ETH_ACC_TX_FRAME_ENET0_Q; + ixEthAccPortData[IX_ETH_PORT_2].ixEthAccTxData.txQueue + = IX_ETH_ACC_TX_FRAME_ENET1_Q; +#ifdef __ixp46X + ixEthAccPortData[IX_ETH_PORT_3].ixEthAccTxData.txQueue + = IX_ETH_ACC_TX_FRAME_ENET2_Q; +#endif + /* Fill the corspondance between ports and NPEs + * This defines the mapping from port to npeIds. + */ + + ixEthAccPortData[IX_ETH_PORT_1].npeId = IX_NPEMH_NPEID_NPEB; + ixEthAccPortData[IX_ETH_PORT_2].npeId = IX_NPEMH_NPEID_NPEC; +#ifdef __ixp46X + ixEthAccPortData[IX_ETH_PORT_3].npeId = IX_NPEMH_NPEID_NPEA; +#endif + /* set the default rx scheduling discipline */ + ixEthAccDataInfo.schDiscipline = FIFO_NO_PRIORITY; + + /* + * Queue Selection step: + * + * The following code selects all the queues and build + * a temporary array which contains for each queue + * - the queue Id, + * - the highest traffic class (in case of many + * priorities configured for the same queue on different + * ports) + * - the number of different Npes which are + * configured to write to this queue. + * + * The output of this loop is a temporary array of RX queues + * in any order. + * + */ +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + for (ixEthAccPortId = 0; + (ixEthAccPortId < IX_ETH_ACC_NUMBER_OF_PORTS) + && (ret == IX_ETH_ACC_SUCCESS); + ixEthAccPortId++) + { + /* map between ethDb and ethAcc port Ids */ + ixEthDbPortId = (IxEthDBPortId)ixEthAccPortId; + + /* map between npeId and ethAcc port Ids */ + ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId); + + /* Iterate thru the different priorities */ + for (ixEthDBTrafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; + ixEthDBTrafficClass <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY; + ixEthDBTrafficClass++) + { + ixEthDBStatus = ixEthDBFeaturePropertyGet( + ixEthDbPortId, + IX_ETH_DB_VLAN_QOS, + ixEthDBTrafficClass, + &ixEthDBPropertyType, + (void *)&ixEthDBParameter); + + if (ixEthDBStatus == IX_ETH_DB_SUCCESS) + { + /* This port and QoS class are mapped to + * a RX queue. + */ + if (ixEthDBPropertyType == IX_ETH_DB_INTEGER_PROPERTY) + { + /* remember the highest npe Id supporting ethernet */ + if (ixNpeId > ixHighestNpeId) + { + ixHighestNpeId = ixNpeId; + } + + /* search the queue in the list of queues + * already used by an other port or QoS + */ + for (rxQueue = 0; + rxQueue < rxQueueCount; + rxQueue++) + { + if (rxQueues[rxQueue].qId == (IxQMgrQId)ixEthDBParameter) + { + /* found an existing setup, update the number of ports + * for this queue if the port maps to + * a different NPE. + */ + if (rxQueues[rxQueue].npeId != ixNpeId) + { + rxQueues[rxQueue].npeCount++; + rxQueues[rxQueue].npeId = ixNpeId; + } + /* get the highest traffic class for this queue */ + if (rxQueues[rxQueue].trafficClass > ixEthDBTrafficClass) + { + rxQueues[rxQueue].trafficClass = ixEthDBTrafficClass; + } + break; + } + } + if (rxQueue == rxQueueCount) + { + /* new queue not found in the current list, + * add a new entry. + */ + IX_OSAL_ASSERT(rxQueueCount < IX_ETHACC_MAX_RX_QUEUES); + rxQueues[rxQueueCount].qId = ixEthDBParameter; + rxQueues[rxQueueCount].npeCount = 1; + rxQueues[rxQueueCount].npeId = ixNpeId; + rxQueues[rxQueueCount].trafficClass = ixEthDBTrafficClass; + rxQueueCount++; + } + } + else + { + /* unexpected property type (not Integer) */ + ret = IX_ETH_ACC_FAIL; + + IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: unexpected property type returned by EthDB\n", 0, 0, 0, 0, 0, 0); + + /* no point to continue to iterate */ + break; + } + } + else + { + /* No Rx queue configured for this port + * and this traffic class. Do nothing. + */ + } + } + + /* notify EthDB that queue initialization is complete and traffic class allocation is frozen */ + ixEthDBFeaturePropertySet(ixEthDbPortId, + IX_ETH_DB_VLAN_QOS, + IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE, + NULL /* ignored */); + } + +#else + + ixNpeId = IX_ETH_ACC_PORT_TO_NPE_ID(ixEthAccPortId); + rxQueues[0].qId = 4; + rxQueues[0].npeCount = 1; + rxQueues[0].npeId = ixNpeId; + rxQueues[0].trafficClass = IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; + rxQueueCount++; + +#endif + + /* check there is at least 1 rx queue : there is no point + * to continue if there is no rx queue configured + */ + if ((rxQueueCount == 0) || (ret == IX_ETH_ACC_FAIL)) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: no queues configured, bailing out\n", 0, 0, 0, 0, 0, 0); + return (IX_ETH_ACC_FAIL); + } + + /* Queue sort step: + * + * Re-order the array of queues by decreasing traffic class + * using a bubble sort. (trafficClass 0 is the lowest + * priority traffic, trafficClass 7 is the highest priority traffic) + * + * Primary sort order is traffic class + * Secondary sort order is npeId + * + * Note that a bubble sort algorithm is not very efficient when + * the number of queues grows . However, this is not a very bad choice + * considering the very small number of entries to sort. Also, bubble + * sort is extremely fast when the list is already sorted. + * + * The output of this loop is a sorted array of queues. + * + */ + sortIterations = 0; + do + { + sortIterations++; + completelySorted = TRUE; + for (rxQueue = 0; + rxQueue < rxQueueCount - sortIterations; + rxQueue++) + { + /* compare adjacent elements */ + if ((rxQueues[rxQueue].trafficClass < + rxQueues[rxQueue+1].trafficClass) + || ((rxQueues[rxQueue].trafficClass == + rxQueues[rxQueue+1].trafficClass) + &&(rxQueues[rxQueue].npeId < + rxQueues[rxQueue+1].npeId))) + { + /* swap adjacent elements */ + int npeCount = rxQueues[rxQueue].npeCount; + UINT32 npeId = rxQueues[rxQueue].npeId; + IxQMgrQId qId = rxQueues[rxQueue].qId; + IxEthDBProperty trafficClass = rxQueues[rxQueue].trafficClass; + rxQueues[rxQueue].npeCount = rxQueues[rxQueue+1].npeCount; + rxQueues[rxQueue].npeId = rxQueues[rxQueue+1].npeId; + rxQueues[rxQueue].qId = rxQueues[rxQueue+1].qId; + rxQueues[rxQueue].trafficClass = rxQueues[rxQueue+1].trafficClass; + rxQueues[rxQueue+1].npeCount = npeCount; + rxQueues[rxQueue+1].npeId = npeId; + rxQueues[rxQueue+1].qId = qId; + rxQueues[rxQueue+1].trafficClass = trafficClass; + completelySorted = FALSE; + } + } + } + while (!completelySorted); + + /* Queue traffic class list: + * + * Fill an array of rx queues linked by ascending traffic classes. + * + * If the queues are configured as follows + * qId 6 -> traffic class 0 (lowest) + * qId 7 -> traffic class 0 + * qId 8 -> traffic class 6 + * qId 12 -> traffic class 7 (highest) + * + * Then the output of this loop will be + * + * higherPriorityQueue[6] = 8 + * higherPriorityQueue[7] = 8 + * higherPriorityQueue[8] = 12 + * higherPriorityQueue[12] = Invalid queueId + * higherPriorityQueue[...] = Invalid queueId + * + * Note that this queue ordering does not handle all possibilities + * that could result from different rules associated with different + * ports, and inconsistencies in the rules. In all cases, the + * output of this algorithm is a simple linked list of queues, + * without closed circuit. + + * This list is implemented as an array with invalid values initialized + * with an "invalid" queue id which is the maximum number of queues. + * + */ + + /* + * Initialise the rx queue list. + */ + for (rxQueue = 0; rxQueue < IX_QMGR_MAX_NUM_QUEUES; rxQueue++) + { + ixEthAccDataInfo.higherPriorityQueue[rxQueue] = IX_QMGR_MAX_NUM_QUEUES; + } + + /* build the linked list for this NPE. + */ + for (ixNpeId = 0; + ixNpeId <= ixHighestNpeId; + ixNpeId++) + { + /* iterate thru the sorted list of queues + */ + ixQId = IX_QMGR_MAX_NUM_QUEUES; + for (rxQueue = 0; + rxQueue < rxQueueCount; + rxQueue++) + { + if (rxQueues[rxQueue].npeId == ixNpeId) + { + ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId; + /* iterate thru queues with the same traffic class + * than the current queue. (queues are ordered by descending + * traffic classes and npeIds). + */ + while ((rxQueue < rxQueueCount - 1) + && (rxQueues[rxQueue].trafficClass + == rxQueues[rxQueue+1].trafficClass) + && (ixNpeId == rxQueues[rxQueue].npeId)) + { + rxQueue++; + ixEthAccDataInfo.higherPriorityQueue[rxQueues[rxQueue].qId] = ixQId; + } + ixQId = rxQueues[rxQueue].qId; + } + } + } + + /* point on the first dynamic queue description */ + qInfoDes = ixEthAccQmgrRxQueuesInfo; + + /* update the list of queues with the rx queues */ + for (rxQueue = 0; + (rxQueue < rxQueueCount) && (ret == IX_ETH_ACC_SUCCESS); + rxQueue++) + { + /* Don't utilize more than IX_ETHACC_MAX_LARGE_RX_QUEUES queues + * with the full 128 entries. For the lower priority queues, use + * a smaller number of entries. This ensures queue resources + * remain available for other components. + */ + if( (rxQueueCount > IX_ETHACC_MAX_LARGE_RX_QUEUES) && + (rxQueue < rxQueueCount - IX_ETHACC_MAX_LARGE_RX_QUEUES) ) + { + /* add the small RX Queue setup template to the list of queues */ + memcpy(qInfoDes, &ixEthAccQmgrRxSmallTemplate, sizeof(*qInfoDes)); + } else { + /* add the default RX Queue setup template to the list of queues */ + memcpy(qInfoDes, &ixEthAccQmgrRxDefaultTemplate, sizeof(*qInfoDes)); + } + + /* setup the RxQueue ID */ + qInfoDes->qId = rxQueues[rxQueue].qId; + + /* setup the RxQueue watermark level + * + * Each queue can be filled by many NPEs. To avoid the + * NPEs to write to a full queue, need to set the + * high watermark level for nearly full condition. + * (the high watermark level are a power of 2 + * starting from the top of the queue) + * + * Number of watermark + * ports level + * 1 0 + * 2 1 + * 3 2 + * 4 4 + * 5 4 + * 6 8 + * n approx. 2**ceil(log2(n)) + */ + if (rxQueues[rxQueue].npeCount == 1) + { + qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL0; + } + else if (rxQueues[rxQueue].npeCount == 2) + { + qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL1; + } + else if (rxQueues[rxQueue].npeCount == 3) + { + qInfoDes->AlmostFullThreshold = IX_QMGR_Q_WM_LEVEL2; + } + else + { + /* reach the maximum number for CSR 2.0 */ + IX_ETH_ACC_WARNING_LOG("ixEthAccQMgrQueuesConfig: maximum number of NPEs per queue reached, bailing out\n", 0, 0, 0, 0, 0, 0); + ret = IX_ETH_ACC_FAIL; + break; + } + + /* move to next queue entry */ + ++qInfoDes; + } + + /* configure the static list (RxFree, Tx and TxDone queues) */ + for (qInfoDes = ixEthAccQmgrStaticInfo; + (qInfoDes->qCallback != (IxQMgrCallback) NULL ) + && (ret == IX_ETH_ACC_SUCCESS); + ++qInfoDes) + { + ret = ixEthAccQMgrQueueSetup(qInfoDes); + } + + /* configure the dynamic list (Rx queues) */ + for (qInfoDes = ixEthAccQmgrRxQueuesInfo; + (qInfoDes->qCallback != (IxQMgrCallback) NULL ) + && (ret == IX_ETH_ACC_SUCCESS); + ++qInfoDes) + { + ret = ixEthAccQMgrQueueSetup(qInfoDes); + } + + return(ret); +} + +/** + * @fn ixEthAccQMgrRxQEntryGet(UINT32 *rxQueueEntries) + * + * @brief Add and return the total number of entries in all Rx queues + * + * @param UINT32 rxQueueEntries[in] number of entries in all queues + * + * @return void + * + * @note Rx queues configuration is driven by Qos Setup. There is a + * variable number of rx queues which are set at initialisation. + * + * @internal + */ +IX_ETH_ACC_PUBLIC +void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries) +{ + UINT32 rxQueueLevel; + IxEthAccQregInfo *qInfoDes;; + + *numRxQueueEntries = 0; + + /* iterate thru rx queues */ + for (qInfoDes = ixEthAccQmgrRxQueuesInfo; + qInfoDes->qCallback != (IxQMgrCallback)NULL; + ++qInfoDes) + { + /* retrieve the rx queue level */ + rxQueueLevel = 0; + ixQMgrQNumEntriesGet(qInfoDes->qId, &rxQueueLevel); + (*numRxQueueEntries) += rxQueueLevel; + } +} + +/** + * @fn ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback) + * + * @brief Change the callback registered to all rx queues. + * + * @param IxQMgrCallback ixQMgrCallback[in] QMgr callback to register + * + * @return IxEthAccStatus + * + * @note The user may decide to use different Rx mechanisms + * (e.g. receive many frames at the same time , or receive + * one frame at a time, depending on the overall application + * performances). A different QMgr callback is registered. This + * way, there is no excessive pointer checks in the datapath. + * + * @internal + */ +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback) +{ + IxEthAccQregInfo *qInfoDes; + IxEthAccStatus ret = IX_ETH_ACC_SUCCESS; + + /* parameter check */ + if (NULL == ixQMgrCallback) + { + ret = IX_ETH_ACC_FAIL; + } + + /* iterate thru rx queues */ + for (qInfoDes = ixEthAccQmgrRxQueuesInfo; + (qInfoDes->qCallback != (IxQMgrCallback) NULL ) + && (ret == IX_ETH_ACC_SUCCESS); + ++qInfoDes) + { + /* register the rx callback for all queues */ + if (ixQMgrNotificationCallbackSet(qInfoDes->qId, + ixQMgrCallback, + qInfoDes->callbackTag + ) != IX_SUCCESS) + { + ret = IX_ETH_ACC_FAIL; + } + } + return(ret); +} + +/** + * @fn ixEthAccSingleEthNpeCheck(IxEthAccPortId portId) + * + * @brief Check the npe exists for this port + * + * @param IxEthAccPortId portId[in] port + * + * @return IxEthAccStatus + * + * @internal + */ +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId) +{ + + /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if ((IX_ETH_PORT_1 == portId) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == + IX_FEATURE_CTRL_COMPONENT_ENABLED)) + { + return IX_ETH_ACC_SUCCESS; + } + + if ((IX_ETH_PORT_2 == portId) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == + IX_FEATURE_CTRL_COMPONENT_ENABLED)) + { + return IX_ETH_ACC_SUCCESS; + } + + if ((IX_ETH_PORT_3 == portId) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) == + IX_FEATURE_CTRL_COMPONENT_ENABLED)) + { + return IX_ETH_ACC_SUCCESS; + } + + return IX_ETH_ACC_FAIL; + } + + return IX_ETH_ACC_SUCCESS; +} + +/** + * @fn ixEthAccStatsShow(void) + * + * @brief Displays all EthAcc stats + * + * @return void + * + */ +void ixEthAccStatsShow(IxEthAccPortId portId) +{ + ixEthAccMdioShow(); + + printf("\nPort %u\nUnicast MAC : ", portId); + ixEthAccPortUnicastAddressShow(portId); + ixEthAccPortMulticastAddressShow(portId); + printf("\n"); + + ixEthAccDataPlaneShow(); +} + + + diff --git a/drivers/net/npe/IxEthAccControlInterface.c b/drivers/net/npe/IxEthAccControlInterface.c new file mode 100644 index 0000000000..44328473e6 --- /dev/null +++ b/drivers/net/npe/IxEthAccControlInterface.c @@ -0,0 +1,533 @@ +/** + * @file IxEthAccControlInterface.c + * + * @author Intel Corporation + * @date + * + * @brief IX_ETH_ACC_PUBLIC wrappers for control plane functions + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" +#include "IxEthAcc.h" +#include "IxEthAcc_p.h" + +PUBLIC IxOsalMutex ixEthAccControlInterfaceMutex; + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + printf("EthAcc: (Mac) cannot enable port %d, service not initialized\n", portId); + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + /* check the context is iinitialized */ + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortEnabledQueryPriv(portId, enabled); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortPromiscuousModeClearPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortPromiscuousModeSetPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortUnicastMacAddressSetPriv(portId, macAddr); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortUnicastMacAddressGetPriv(portId, macAddr); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortMulticastAddressJoinPriv(portId, macAddr); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortMulticastAddressJoinAllPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId, IxEthAccMacAddr *macAddr) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortMulticastAddressLeavePriv(portId, macAddr); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortMulticastAddressLeaveAllPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortUnicastAddressShow(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortUnicastAddressShowPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC void +ixEthAccPortMulticastAddressShow(IxEthAccPortId portId) +{ + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return; + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + ixEthAccPortMulticastAddressShowPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortDuplexModeSet(IxEthAccPortId portId, IxEthAccDuplexMode mode) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortDuplexModeSetPriv(portId, mode); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortDuplexModeGet(IxEthAccPortId portId, IxEthAccDuplexMode *mode) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortDuplexModeGetPriv(portId, mode); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortTxFrameAppendPaddingEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortTxFrameAppendPaddingDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortTxFrameAppendFCSEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortTxFrameAppendFCSDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortRxFrameAppendFCSEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortRxFrameAppendFCSDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccTxSchedulingDisciplineSetPriv(portId, sched); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccRxSchedulingDisciplineSetPriv(sched); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccNpeLoopbackEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortTxEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortTxEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortRxEnable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortRxEnablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccNpeLoopbackDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortTxDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortTxDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortRxDisable(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortRxDisablePriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} + +IX_ETH_ACC_PUBLIC IxEthAccStatus +ixEthAccPortMacReset(IxEthAccPortId portId) +{ + IxEthAccStatus result; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&ixEthAccControlInterfaceMutex, IX_OSAL_WAIT_FOREVER); + result = ixEthAccPortMacResetPriv(portId); + ixOsalMutexUnlock(&ixEthAccControlInterfaceMutex); + return result; +} diff --git a/drivers/net/npe/IxEthAccDataPlane.c b/drivers/net/npe/IxEthAccDataPlane.c new file mode 100644 index 0000000000..b62f0d016e --- /dev/null +++ b/drivers/net/npe/IxEthAccDataPlane.c @@ -0,0 +1,2483 @@ +/** + * @file IxEthDataPlane.c + * + * @author Intel Corporation + * @date 12-Feb-2002 + * + * @brief This file contains the implementation of the IXPxxx + * Ethernet Access Data plane component + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxNpeMh.h" +#include "IxEthAcc.h" +#include "IxEthDB.h" +#include "IxOsal.h" +#include "IxEthDBPortDefs.h" +#include "IxFeatureCtrl.h" +#include "IxEthAcc_p.h" +#include "IxEthAccQueueAssign_p.h" + +extern PUBLIC IxEthAccMacState ixEthAccMacState[]; +extern PUBLIC UINT32 ixEthAccNewSrcMask; + +/** + * private functions prototype + */ +PRIVATE IX_OSAL_MBUF * +ixEthAccEntryFromQConvert(UINT32 qEntry, UINT32 mask); + +PRIVATE UINT32 +ixEthAccMbufRxQPrepare(IX_OSAL_MBUF *mbuf); + +PRIVATE UINT32 +ixEthAccMbufTxQPrepare(IX_OSAL_MBUF *mbuf); + +PRIVATE IxEthAccStatus +ixEthAccTxSwQHighestPriorityGet(IxEthAccPortId portId, + IxEthAccTxPriority *priorityPtr); + +PRIVATE IxEthAccStatus +ixEthAccTxFromSwQ(IxEthAccPortId portId, + IxEthAccTxPriority priority); + +PRIVATE IxEthAccStatus +ixEthAccRxFreeFromSwQ(IxEthAccPortId portId); + +PRIVATE void +ixEthAccMbufFromTxQ(IX_OSAL_MBUF *mbuf); + +PRIVATE void +ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf); + +PRIVATE IX_STATUS +ixEthAccQmgrLockTxWrite(IxEthAccPortId portId, + UINT32 qBuffer); + +PRIVATE IX_STATUS +ixEthAccQmgrLockRxWrite(IxEthAccPortId portId, + UINT32 qBuffer); + +PRIVATE IX_STATUS +ixEthAccQmgrTxWrite(IxEthAccPortId portId, + UINT32 qBuffer, + UINT32 priority); + +/** + * @addtogroup IxEthAccPri + *@{ + */ + +/* increment a counter only when stats are enabled */ +#define TX_STATS_INC(port,field) \ + IX_ETH_ACC_STATS_INC(ixEthAccPortData[port].ixEthAccTxData.stats.field) +#define RX_STATS_INC(port,field) \ + IX_ETH_ACC_STATS_INC(ixEthAccPortData[port].ixEthAccRxData.stats.field) + +/* always increment the counter (mainly used for unexpected errors) */ +#define TX_INC(port,field) \ + ixEthAccPortData[port].ixEthAccTxData.stats.field++ +#define RX_INC(port,field) \ + ixEthAccPortData[port].ixEthAccRxData.stats.field++ + +PRIVATE IxEthAccDataPlaneStats ixEthAccDataStats; + +extern IxEthAccPortDataInfo ixEthAccPortData[]; +extern IxEthAccInfo ixEthAccDataInfo; + +PRIVATE IxOsalFastMutex txWriteMutex[IX_ETH_ACC_NUMBER_OF_PORTS]; +PRIVATE IxOsalFastMutex rxWriteMutex[IX_ETH_ACC_NUMBER_OF_PORTS]; + +/** + * + * @brief Mbuf header conversion macros : they implement the + * different conversions using a temporary value. They also double-check + * that the parameters can be converted to/from NPE format. + * + */ +#if defined(__wince) && !defined(IN_KERNEL) +#define PTR_VIRT2NPE(ptrSrc,dst) \ + do { UINT32 temp; \ + IX_OSAL_ENSURE(sizeof(ptrSrc) == sizeof(UINT32), "Wrong parameter type"); \ + IX_OSAL_ENSURE(sizeof(dst) == sizeof(UINT32), "Wrong parameter type"); \ + temp = (UINT32)IX_OSAL_MBUF_MBUF_VIRTUAL_TO_PHYSICAL_TRANSLATION((IX_OSAL_MBUF*)ptrSrc); \ + (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \ + while(0) + +#define PTR_NPE2VIRT(type,src,ptrDst) \ + do { void *temp; \ + IX_OSAL_ENSURE(sizeof(type) == sizeof(UINT32), "Wrong parameter type"); \ + IX_OSAL_ENSURE(sizeof(src) == sizeof(UINT32), "Wrong parameter type"); \ + IX_OSAL_ENSURE(sizeof(ptrDst) == sizeof(UINT32), "Wrong parameter type"); \ + temp = (void *)IX_OSAL_SWAP_BE_SHARED_LONG(src); \ + (ptrDst) = (type)IX_OSAL_MBUF_MBUF_PHYSICAL_TO_VIRTUAL_TRANSLATION(temp); } \ + while(0) +#else +#define PTR_VIRT2NPE(ptrSrc,dst) \ + do { UINT32 temp; \ + IX_OSAL_ENSURE(sizeof(ptrSrc) == sizeof(UINT32), "Wrong parameter type"); \ + IX_OSAL_ENSURE(sizeof(dst) == sizeof(UINT32), "Wrong parameter type"); \ + temp = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS(ptrSrc); \ + (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \ + while(0) + +#define PTR_NPE2VIRT(type,src,ptrDst) \ + do { void *temp; \ + IX_OSAL_ENSURE(sizeof(type) == sizeof(UINT32), "Wrong parameter type"); \ + IX_OSAL_ENSURE(sizeof(src) == sizeof(UINT32), "Wrong parameter type"); \ + IX_OSAL_ENSURE(sizeof(ptrDst) == sizeof(UINT32), "Wrong parameter type"); \ + temp = (void *)IX_OSAL_SWAP_BE_SHARED_LONG(src); \ + (ptrDst) = (type)IX_OSAL_MMU_PHYS_TO_VIRT(temp); } \ + while(0) +#endif + +/** + * + * @brief Mbuf payload pointer conversion macros : Wince has its own + * method to convert the buffer pointers + */ +#if defined(__wince) && !defined(IN_KERNEL) +#define DATAPTR_VIRT2NPE(ptrSrc,dst) \ + do { UINT32 temp; \ + temp = (UINT32)IX_OSAL_MBUF_DATA_VIRTUAL_TO_PHYSICAL_TRANSLATION(ptrSrc); \ + (dst) = IX_OSAL_SWAP_BE_SHARED_LONG(temp); } \ + while(0) + +#else +#define DATAPTR_VIRT2NPE(ptrSrc,dst) PTR_VIRT2NPE(IX_OSAL_MBUF_MDATA(ptrSrc),dst) +#endif + + +/* Flush the shared part of the mbuf header */ +#define IX_ETHACC_NE_CACHE_FLUSH(mbufPtr) \ + do { \ + IX_OSAL_CACHE_FLUSH(IX_ETHACC_NE_SHARED(mbufPtr), \ + sizeof(IxEthAccNe)); \ + } \ + while(0) + +/* Invalidate the shared part of the mbuf header */ +#define IX_ETHACC_NE_CACHE_INVALIDATE(mbufPtr) \ + do { \ + IX_OSAL_CACHE_INVALIDATE(IX_ETHACC_NE_SHARED(mbufPtr), \ + sizeof(IxEthAccNe)); \ + } \ + while(0) + +/* Preload one cache line (shared mbuf headers are aligned + * and their size is 1 cache line) + * + * IX_OSAL_CACHED is defined when the mbuf headers are + * allocated from cached memory. + * + * Other processor on emulation environment may not implement + * preload function + */ +#ifdef IX_OSAL_CACHED + #if (CPU!=SIMSPARCSOLARIS) && !defined (__wince) + #define IX_ACC_DATA_CACHE_PRELOAD(ptr) \ + do { /* preload a cache line (Xscale Processor) */ \ + __asm__ (" pld [%0]\n": : "r" (ptr)); \ + } \ + while(0) + #else + /* preload not implemented on different processor */ + #define IX_ACC_DATA_CACHE_PRELOAD(mbufPtr) \ + do { /* nothing */ } while (0) + #endif +#else + /* preload not needed if cache is not enabled */ + #define IX_ACC_DATA_CACHE_PRELOAD(mbufPtr) \ + do { /* nothing */ } while (0) +#endif + +/** + * + * @brief function to retrieve the correct pointer from + * a queue entry posted by the NPE + * + * @param qEntry : entry from qmgr queue + * mask : applicable mask for this queue + * (4 most significant bits are used for additional informations) + * + * @return IX_OSAL_MBUF * pointer to mbuf header + * + * @internal + */ +PRIVATE IX_OSAL_MBUF * +ixEthAccEntryFromQConvert(UINT32 qEntry, UINT32 mask) +{ + IX_OSAL_MBUF *mbufPtr; + + if (qEntry != 0) + { + /* mask NPE bits (e.g. priority, port ...) */ + qEntry &= mask; + +#if IX_ACC_DRAM_PHYS_OFFSET != 0 + /* restore the original address pointer (if PHYS_OFFSET is not 0) */ + qEntry |= (IX_ACC_DRAM_PHYS_OFFSET & ~IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); +#endif + /* get the mbuf pointer address from the npe-shared address */ + qEntry -= offsetof(IX_OSAL_MBUF,ix_ne); + + /* phys2virt mbuf */ + mbufPtr = (IX_OSAL_MBUF *)IX_OSAL_MMU_PHYS_TO_VIRT(qEntry); + + /* preload the cacheline shared with NPE */ + IX_ACC_DATA_CACHE_PRELOAD(IX_ETHACC_NE_SHARED(mbufPtr)); + + /* preload the cacheline used by xscale */ + IX_ACC_DATA_CACHE_PRELOAD(mbufPtr); + } + else + { + mbufPtr = NULL; + } + + return mbufPtr; +} + +/* Convert the mbuf header for NPE transmission */ +PRIVATE UINT32 +ixEthAccMbufTxQPrepare(IX_OSAL_MBUF *mbuf) +{ + UINT32 qbuf; + UINT32 len; + + /* endianess swap for tci and flags + note: this is done only once, even for chained buffers */ + IX_ETHACC_NE_FLAGS(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_FLAGS(mbuf)); + IX_ETHACC_NE_VLANTCI(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_VLANTCI(mbuf)); + + /* test for unchained mbufs */ + if (IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) == NULL) + { + /* "best case" scenario : unchained mbufs */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedTxMBufs); + + /* payload pointer conversion */ + DATAPTR_VIRT2NPE(mbuf, IX_ETHACC_NE_DATA(mbuf)); + + /* unchained mbufs : the frame length is the mbuf length + * and the 2 identical lengths are stored in the same + * word. + */ + len = IX_OSAL_MBUF_MLEN(mbuf); + + /* set the length in both length and pktLen 16-bits fields */ + len |= (len << IX_ETHNPE_ACC_LENGTH_OFFSET); + IX_ETHACC_NE_LEN(mbuf) = IX_OSAL_SWAP_BE_SHARED_LONG(len); + + /* unchained mbufs : next contains 0 */ + IX_ETHACC_NE_NEXT(mbuf) = 0; + + /* flush shared header after all address conversions */ + IX_ETHACC_NE_CACHE_FLUSH(mbuf); + } + else + { + /* chained mbufs */ + IX_OSAL_MBUF *ptr = mbuf; + IX_OSAL_MBUF *nextPtr; + UINT32 frmLen; + + /* get the frame length from the header of the first buffer */ + frmLen = IX_OSAL_MBUF_PKT_LEN(mbuf); + + do + { + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedTxMBufs); + + /* payload pointer */ + DATAPTR_VIRT2NPE(ptr,IX_ETHACC_NE_DATA(ptr)); + /* Buffer length and frame length are stored in the same word */ + len = IX_OSAL_MBUF_MLEN(ptr); + len = frmLen | (len << IX_ETHNPE_ACC_LENGTH_OFFSET); + IX_ETHACC_NE_LEN(ptr) = IX_OSAL_SWAP_BE_SHARED_LONG(len); + + /* get the virtual next chain pointer */ + nextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr); + if (nextPtr != NULL) + { + /* shared pointer of the next buffer is chained */ + PTR_VIRT2NPE(IX_ETHACC_NE_SHARED(nextPtr), + IX_ETHACC_NE_NEXT(ptr)); + } + else + { + IX_ETHACC_NE_NEXT(ptr) = 0; + } + + /* flush shared header after all address conversions */ + IX_ETHACC_NE_CACHE_FLUSH(ptr); + + /* move to next buffer */ + ptr = nextPtr; + + /* the frame length field is set only in the first buffer + * and is zeroed in the next buffers + */ + frmLen = 0; + } + while(ptr != NULL); + + } + + /* virt2phys mbuf itself */ + qbuf = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS( + IX_ETHACC_NE_SHARED(mbuf)); + + /* Ensure the bits which are reserved to exchange information with + * the NPE are cleared + * + * If the mbuf address is not correctly aligned, or from an + * incompatible memory range, there is no point to continue + */ + IX_OSAL_ENSURE(((qbuf & ~IX_ETHNPE_QM_Q_TXENET_ADDR_MASK) == 0), + "Invalid address range"); + + return qbuf; +} + +/* Convert the mbuf header for NPE reception */ +PRIVATE UINT32 +ixEthAccMbufRxQPrepare(IX_OSAL_MBUF *mbuf) +{ + UINT32 len; + UINT32 qbuf; + + if (IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) == NULL) + { + /* "best case" scenario : unchained mbufs */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedRxFreeMBufs); + + /* unchained mbufs : payload pointer */ + DATAPTR_VIRT2NPE(mbuf, IX_ETHACC_NE_DATA(mbuf)); + + /* unchained mbufs : set the buffer length + * and the frame length field is zeroed + */ + len = (IX_OSAL_MBUF_MLEN(mbuf) << IX_ETHNPE_ACC_LENGTH_OFFSET); + IX_ETHACC_NE_LEN(mbuf) = IX_OSAL_SWAP_BE_SHARED_LONG(len); + + /* unchained mbufs : next pointer is null */ + IX_ETHACC_NE_NEXT(mbuf) = 0; + + /* flush shared header after all address conversions */ + IX_ETHACC_NE_CACHE_FLUSH(mbuf); + + /* remove shared header cache line */ + IX_ETHACC_NE_CACHE_INVALIDATE(mbuf); + } + else + { + /* chained mbufs */ + IX_OSAL_MBUF *ptr = mbuf; + IX_OSAL_MBUF *nextPtr; + + do + { + /* chained mbufs */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedRxFreeMBufs); + + /* we must save virtual next chain pointer */ + nextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr); + + if (nextPtr != NULL) + { + /* chaining pointer for NPE */ + PTR_VIRT2NPE(IX_ETHACC_NE_SHARED(nextPtr), + IX_ETHACC_NE_NEXT(ptr)); + } + else + { + IX_ETHACC_NE_NEXT(ptr) = 0; + } + + /* payload pointer */ + DATAPTR_VIRT2NPE(ptr,IX_ETHACC_NE_DATA(ptr)); + + /* buffer length */ + len = (IX_OSAL_MBUF_MLEN(ptr) << IX_ETHNPE_ACC_LENGTH_OFFSET); + IX_ETHACC_NE_LEN(ptr) = IX_OSAL_SWAP_BE_SHARED_LONG(len); + + /* flush shared header after all address conversions */ + IX_ETHACC_NE_CACHE_FLUSH(ptr); + + /* remove shared header cache line */ + IX_ETHACC_NE_CACHE_INVALIDATE(ptr); + + /* next mbuf in the chain */ + ptr = nextPtr; + } + while(ptr != NULL); + } + + /* virt2phys mbuf itself */ + qbuf = (UINT32)IX_OSAL_MMU_VIRT_TO_PHYS( + IX_ETHACC_NE_SHARED(mbuf)); + + /* Ensure the bits which are reserved to exchange information with + * the NPE are cleared + * + * If the mbuf address is not correctly aligned, or from an + * incompatible memory range, there is no point to continue + */ + IX_OSAL_ENSURE(((qbuf & ~IX_ETHNPE_QM_Q_RXENET_ADDR_MASK) == 0), + "Invalid address range"); + + return qbuf; +} + +/* Convert the mbuf header after NPE transmission + * Since there is nothing changed by the NPE, there is no need + * to process anything but the update of internal stats + * when they are enabled +*/ +PRIVATE void +ixEthAccMbufFromTxQ(IX_OSAL_MBUF *mbuf) +{ +#ifndef NDEBUG + /* test for unchained mbufs */ + if (IX_ETHACC_NE_NEXT(mbuf) == 0) + { + /* unchained mbufs : update the stats */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedTxDoneMBufs); + } + else + { + /* chained mbufs : walk the chain and update the stats */ + IX_OSAL_MBUF *ptr = mbuf; + + do + { + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedTxDoneMBufs); + ptr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr); + } + while (ptr != NULL); + } +#endif +} + +/* Convert the mbuf header after NPE reception */ +PRIVATE void +ixEthAccMbufFromRxQ(IX_OSAL_MBUF *mbuf) +{ + UINT32 len; + + /* endianess swap for tci and flags + note: this is done only once, even for chained buffers */ + IX_ETHACC_NE_FLAGS(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_FLAGS(mbuf)); + IX_ETHACC_NE_VLANTCI(mbuf) = IX_OSAL_SWAP_BE_SHARED_SHORT(IX_ETHACC_NE_VLANTCI(mbuf)); + + /* test for unchained mbufs */ + if (IX_ETHACC_NE_NEXT(mbuf) == 0) + { + /* unchained mbufs */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.unchainedRxMBufs); + + /* get the frame length. it is the same than the buffer length */ + len = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(mbuf)); + len &= IX_ETHNPE_ACC_PKTLENGTH_MASK; + IX_OSAL_MBUF_PKT_LEN(mbuf) = IX_OSAL_MBUF_MLEN(mbuf) = len; + + /* clears the next packet field */ + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mbuf) = NULL; + } + else + { + IX_OSAL_MBUF *ptr = mbuf; + IX_OSAL_MBUF *nextPtr; + UINT32 frmLen; + + /* convert the frame length */ + frmLen = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(mbuf)); + IX_OSAL_MBUF_PKT_LEN(mbuf) = (frmLen & IX_ETHNPE_ACC_PKTLENGTH_MASK); + + /* chained mbufs */ + do + { + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.chainedRxMBufs); + + /* convert the length */ + len = IX_OSAL_SWAP_BE_SHARED_LONG(IX_ETHACC_NE_LEN(ptr)); + IX_OSAL_MBUF_MLEN(ptr) = (len >> IX_ETHNPE_ACC_LENGTH_OFFSET); + + /* get the next pointer */ + PTR_NPE2VIRT(IX_OSAL_MBUF *,IX_ETHACC_NE_NEXT(ptr), nextPtr); + if (nextPtr != NULL) + { + nextPtr = (IX_OSAL_MBUF *)((UINT8 *)nextPtr - offsetof(IX_OSAL_MBUF,ix_ne)); + } + /* set the next pointer */ + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(ptr) = nextPtr; + + /* move to the next buffer */ + ptr = nextPtr; + } + while (ptr != NULL); + } +} + +/* write to qmgr if possible and report an overflow if not possible + * Use a fast lock to protect the queue write. + * This way, the tx feature is reentrant. + */ +PRIVATE IX_STATUS +ixEthAccQmgrLockTxWrite(IxEthAccPortId portId, UINT32 qBuffer) +{ + IX_STATUS qStatus; + if (ixOsalFastMutexTryLock(&txWriteMutex[portId]) == IX_SUCCESS) + { + qStatus = ixQMgrQWrite( + IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), + &qBuffer); +#ifndef NDEBUG + if (qStatus != IX_SUCCESS) + { + TX_STATS_INC(portId, txOverflow); + } +#endif + ixOsalFastMutexUnlock(&txWriteMutex[portId]); + } + else + { + TX_STATS_INC(portId, txLock); + qStatus = IX_QMGR_Q_OVERFLOW; + } + return qStatus; +} + +/* write to qmgr if possible and report an overflow if not possible + * Use a fast lock to protect the queue write. + * This way, the Rx feature is reentrant. + */ +PRIVATE IX_STATUS +ixEthAccQmgrLockRxWrite(IxEthAccPortId portId, UINT32 qBuffer) +{ + IX_STATUS qStatus; + if (ixOsalFastMutexTryLock(&rxWriteMutex[portId]) == IX_SUCCESS) + { + qStatus = ixQMgrQWrite( + IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId), + &qBuffer); +#ifndef NDEBUG + if (qStatus != IX_SUCCESS) + { + RX_STATS_INC(portId, rxFreeOverflow); + } +#endif + ixOsalFastMutexUnlock(&rxWriteMutex[portId]); + } + else + { + RX_STATS_INC(portId, rxFreeLock); + qStatus = IX_QMGR_Q_OVERFLOW; + } + return qStatus; +} + +/* + * Set the priority and write to a qmgr queue. + */ +PRIVATE IX_STATUS +ixEthAccQmgrTxWrite(IxEthAccPortId portId, UINT32 qBuffer, UINT32 priority) +{ + /* fill the priority field */ + qBuffer |= (priority << IX_ETHNPE_QM_Q_FIELD_PRIOR_R); + + return ixEthAccQmgrLockTxWrite(portId, qBuffer); +} + +/** + * + * @brief This function will discover the highest priority S/W Tx Q that + * has entries in it + * + * @param portId - (in) the id of the port whose S/W Tx queues are to be searched + * priorityPtr - (out) the priority of the highest priority occupied q will be written + * here + * + * @return IX_ETH_ACC_SUCCESS if an occupied Q is found + * IX_ETH_ACC_FAIL if no Q has entries + * + * @internal + */ +PRIVATE IxEthAccStatus +ixEthAccTxSwQHighestPriorityGet(IxEthAccPortId portId, + IxEthAccTxPriority *priorityPtr) +{ + if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline + == FIFO_NO_PRIORITY) + { + if(IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. + ixEthAccTxData.txQ[IX_ETH_ACC_TX_DEFAULT_PRIORITY])) + { + return IX_ETH_ACC_FAIL; + } + else + { + *priorityPtr = IX_ETH_ACC_TX_DEFAULT_PRIORITY; + TX_STATS_INC(portId,txPriority[*priorityPtr]); + return IX_ETH_ACC_SUCCESS; + } + } + else + { + IxEthAccTxPriority highestPriority = IX_ETH_ACC_TX_PRIORITY_7; + while(1) + { + if(!IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. + ixEthAccTxData.txQ[highestPriority])) + { + + *priorityPtr = highestPriority; + TX_STATS_INC(portId,txPriority[highestPriority]); + return IX_ETH_ACC_SUCCESS; + + } + if (highestPriority == IX_ETH_ACC_TX_PRIORITY_0) + { + return IX_ETH_ACC_FAIL; + } + highestPriority--; + } + } +} + +/** + * + * @brief This function will take a buffer from a TX S/W Q and attempt + * to add it to the relevant TX H/W Q + * + * @param portId - the port whose TX queue is to be written to + * priority - identifies the queue from which the entry is to be read + * + * @internal + */ +PRIVATE IxEthAccStatus +ixEthAccTxFromSwQ(IxEthAccPortId portId, + IxEthAccTxPriority priority) +{ + IX_OSAL_MBUF *mbuf; + IX_STATUS qStatus; + + IX_OSAL_ENSURE((UINT32)priority <= (UINT32)7, "Invalid priority"); + + IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD( + ixEthAccPortData[portId].ixEthAccTxData.txQ[priority], + mbuf); + + if (mbuf != NULL) + { + /* + * Add the Tx buffer to the H/W Tx Q + * We do not need to flush here as it is already done + * in TxFrameSubmit(). + */ + qStatus = ixEthAccQmgrTxWrite( + portId, + IX_OSAL_MMU_VIRT_TO_PHYS((UINT32)IX_ETHACC_NE_SHARED(mbuf)), + priority); + + if (qStatus == IX_SUCCESS) + { + TX_STATS_INC(portId,txFromSwQOK); + return IX_SUCCESS; + } + else if (qStatus == IX_QMGR_Q_OVERFLOW) + { + /* + * H/W Q overflow, need to save the buffer + * back on the s/w Q. + * we must put it back on the head of the q to avoid + * reordering packet tx + */ + TX_STATS_INC(portId,txFromSwQDelayed); + IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( + ixEthAccPortData[portId].ixEthAccTxData.txQ[priority], + mbuf); + + /*enable Q notification*/ + qStatus = ixQMgrNotificationEnable( + IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), + IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(portId)); + + if (qStatus != IX_SUCCESS && qStatus != IX_QMGR_WARNING) + { + TX_INC(portId,txUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccTxFromSwQ:Unexpected Error: %u\n", + qStatus, 0, 0, 0, 0, 0); + } + } + else + { + TX_INC(portId,txUnexpectedError); + + /* recovery attempt */ + IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( + ixEthAccPortData[portId].ixEthAccTxData.txQ[priority], + mbuf); + + IX_ETH_ACC_FATAL_LOG( + "ixEthAccTxFromSwQ:Error: unexpected QM status 0x%08X\n", + qStatus, 0, 0, 0, 0, 0); + } + } + else + { + /* sw queue is empty */ + } + return IX_ETH_ACC_FAIL; +} + +/** + * + * @brief This function will take a buffer from a RXfree S/W Q and attempt + * to add it to the relevant RxFree H/W Q + * + * @param portId - the port whose RXFree queue is to be written to + * + * @internal + */ +PRIVATE IxEthAccStatus +ixEthAccRxFreeFromSwQ(IxEthAccPortId portId) +{ + IX_OSAL_MBUF *mbuf; + IX_STATUS qStatus = IX_SUCCESS; + + IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD( + ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, + mbuf); + if (mbuf != NULL) + { + /* + * Add The Rx Buffer to the H/W Free buffer Q if possible + */ + qStatus = ixEthAccQmgrLockRxWrite(portId, + IX_OSAL_MMU_VIRT_TO_PHYS( + (UINT32)IX_ETHACC_NE_SHARED(mbuf))); + + if (qStatus == IX_SUCCESS) + { + RX_STATS_INC(portId,rxFreeRepFromSwQOK); + /* + * Buffer added to h/w Q. + */ + return IX_SUCCESS; + } + else if (qStatus == IX_QMGR_Q_OVERFLOW) + { + /* + * H/W Q overflow, need to save the buffer back on the s/w Q. + */ + RX_STATS_INC(portId,rxFreeRepFromSwQDelayed); + + IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( + ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, + mbuf); + } + else + { + /* unexpected qmgr error */ + RX_INC(portId,rxUnexpectedError); + + IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD( + ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, + mbuf); + + IX_ETH_ACC_FATAL_LOG("IxEthAccRxFreeFromSwQ:Error: unexpected QM status 0x%08X\n", + qStatus, 0, 0, 0, 0, 0); + } + } + else + { + /* sw queue is empty */ + } + return IX_ETH_ACC_FAIL; +} + + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccInitDataPlane() +{ + UINT32 portId; + + /* + * Initialize the service and register callback to other services. + */ + + IX_ETH_ACC_MEMSET(&ixEthAccDataStats, + 0, + sizeof(ixEthAccDataStats)); + + for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + ixOsalFastMutexInit(&txWriteMutex[portId]); + ixOsalFastMutexInit(&rxWriteMutex[portId]); + + IX_ETH_ACC_MEMSET(&ixEthAccPortData[portId], + 0, + sizeof(ixEthAccPortData[portId])); + + ixEthAccPortData[portId].ixEthAccTxData.schDiscipline = FIFO_NO_PRIORITY; + } + + return (IX_ETH_ACC_SUCCESS); +} + + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId, + IxEthAccPortTxDoneCallback + txCallbackFn, + UINT32 callbackTag) +{ + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return (IX_ETH_ACC_INVALID_PORT); + } + +/* HACK: removing this code to enable NPE-A preliminary testing + * if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + * { + * IX_ETH_ACC_WARNING_LOG("ixEthAccPortTxDoneCallbackRegister: Unavailable Eth %d: Cannot register TxDone Callback.\n",(INT32)portId,0,0,0,0,0); + * return IX_ETH_ACC_SUCCESS ; + * } + */ + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + if (txCallbackFn == 0) + /* Check for null function pointer here. */ + { + return (IX_ETH_ACC_INVALID_ARG); + } + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = txCallbackFn; + ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = callbackTag; + return (IX_ETH_ACC_SUCCESS); +} + + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, + IxEthAccPortRxCallback + rxCallbackFn, + UINT32 callbackTag) +{ + IxEthAccPortId port; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return (IX_ETH_ACC_INVALID_PORT); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccPortRxCallbackRegister: Unavailable Eth %d: Cannot register Rx Callback.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* Check for null function pointer here. */ + if (rxCallbackFn == NULL) + { + return (IX_ETH_ACC_INVALID_ARG); + } + + /* Check the user is not changing the callback type + * when the port is enabled. + */ + if (ixEthAccMacState[portId].portDisableState == ACTIVE) + { + for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++) + { + if ((ixEthAccMacState[port].portDisableState == ACTIVE) + && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == TRUE)) + { + /* one of the active ports has a different rx callback type. + * Changing the callback type when the port is enabled + * is not safe + */ + return (IX_ETH_ACC_INVALID_ARG); + } + } + } + + /* update the callback pointer : this is done before + * registering the new qmgr callback + */ + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = rxCallbackFn; + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = callbackTag; + + /* update the qmgr callback for rx queues */ + if (ixEthAccQMgrRxCallbacksRegister(ixEthRxFrameQMCallback) + != IX_ETH_ACC_SUCCESS) + { + /* unexpected qmgr error */ + IX_ETH_ACC_FATAL_LOG("ixEthAccPortRxCallbackRegister: unexpected QMgr error, " \ + "could not register Rx single-buffer callback\n", 0, 0, 0, 0, 0, 0); + + RX_INC(portId,rxUnexpectedError); + return (IX_ETH_ACC_INVALID_ARG); + } + + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = FALSE; + + return (IX_ETH_ACC_SUCCESS); +} + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccPortMultiBufferRxCallbackRegister( + IxEthAccPortId portId, + IxEthAccPortMultiBufferRxCallback + rxCallbackFn, + UINT32 callbackTag) +{ + IxEthAccPortId port; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return (IX_ETH_ACC_INVALID_PORT); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccPortMultiBufferRxCallbackRegister: Unavailable Eth %d: Cannot register Rx Callback.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* Check for null function pointer here. */ + if (rxCallbackFn == NULL) + { + return (IX_ETH_ACC_INVALID_ARG); + } + + /* Check the user is not changing the callback type + * when the port is enabled. + */ + if (ixEthAccMacState[portId].portDisableState == ACTIVE) + { + for (port = 0; port < IX_ETH_ACC_NUMBER_OF_PORTS; port++) + { + if ((ixEthAccMacState[port].portDisableState == ACTIVE) + && (ixEthAccPortData[port].ixEthAccRxData.rxMultiBufferCallbackInUse == FALSE)) + { + /* one of the active ports has a different rx callback type. + * Changing the callback type when the port is enabled + * is not safe + */ + return (IX_ETH_ACC_INVALID_ARG); + } + } + } + + /* update the callback pointer : this is done before + * registering the new qmgr callback + */ + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = rxCallbackFn; + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = callbackTag; + + /* update the qmgr callback for rx queues */ + if (ixEthAccQMgrRxCallbacksRegister(ixEthRxMultiBufferQMCallback) + != IX_ETH_ACC_SUCCESS) + { + /* unexpected qmgr error */ + RX_INC(portId,rxUnexpectedError); + + IX_ETH_ACC_FATAL_LOG("ixEthAccPortMultiBufferRxCallbackRegister: unexpected QMgr error, " \ + "could not register Rx multi-buffer callback\n", 0, 0, 0, 0, 0, 0); + + return (IX_ETH_ACC_INVALID_ARG); + } + + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackInUse = TRUE; + + return (IX_ETH_ACC_SUCCESS); +} + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccPortTxFrameSubmit(IxEthAccPortId portId, + IX_OSAL_MBUF *buffer, + IxEthAccTxPriority priority) +{ + IX_STATUS qStatus = IX_SUCCESS; + UINT32 qBuffer; + IxEthAccTxPriority highestPriority; + IxQMgrQStatus txQStatus; + +#ifndef NDEBUG + if (buffer == NULL) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return (IX_ETH_ACC_INVALID_PORT); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_FATAL_LOG("ixEthAccPortTxFrameSubmit: Unavailable Eth %d: Cannot submit Tx Frame.\n", + (INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_PORT_UNINITIALIZED ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + if ((UINT32)priority > (UINT32)IX_ETH_ACC_TX_PRIORITY_7) + { + return (IX_ETH_ACC_INVALID_ARG); + } +#endif + + /* + * Need to Flush the MBUF and its contents (data) as it may be + * read from the NPE. Convert virtual addresses to physical addresses also. + */ + qBuffer = ixEthAccMbufTxQPrepare(buffer); + + /* + * If no fifo priority set on Xscale ... + */ + if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline == + FIFO_NO_PRIORITY) + { + /* + * Add The Tx Buffer to the H/W Tx Q if possible + * (the priority is passed to the NPE, because + * the NPE is able to reorder the frames + * before transmission to the underlying hardware) + */ + qStatus = ixEthAccQmgrTxWrite(portId, + qBuffer, + IX_ETH_ACC_TX_DEFAULT_PRIORITY); + + if (qStatus == IX_SUCCESS) + { + TX_STATS_INC(portId,txQOK); + + /* + * "best case" scenario : Buffer added to h/w Q. + */ + return (IX_SUCCESS); + } + else if (qStatus == IX_QMGR_Q_OVERFLOW) + { + /* + * We were unable to write the buffer to the + * appropriate H/W Q, Save it in the sw Q. + * (use the default priority queue regardless of + * input parameter) + */ + priority = IX_ETH_ACC_TX_DEFAULT_PRIORITY; + } + else + { + /* unexpected qmgr error */ + TX_INC(portId,txUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccPortTxFrameSubmit:Error: qStatus = %u\n", + (UINT32)qStatus, 0, 0, 0, 0, 0); + return (IX_ETH_ACC_FAIL); + } + } + else if (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline == + FIFO_PRIORITY) + { + + /* + * For priority transmission, put the frame directly on the H/W queue + * if the H/W queue is empty, otherwise, put it in a S/W Q + */ + ixQMgrQStatusGet(IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), &txQStatus); + if((txQStatus & IX_QMGR_Q_STATUS_E_BIT_MASK) != 0) + { + /*The tx queue is empty, check whether there are buffers on the s/w queues*/ + if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) + !=IX_ETH_ACC_FAIL) + { + /*there are buffers on the s/w queues, submit them*/ + ixEthAccTxFromSwQ(portId, highestPriority); + + /* the queue was empty, 1 buffer is already supplied + * but is likely to be immediately transmitted and the + * hw queue is likely to be empty again, so submit + * more from the sw queues + */ + if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) + !=IX_ETH_ACC_FAIL) + { + ixEthAccTxFromSwQ(portId, highestPriority); + /* + * and force the buffer supplied to be placed + * on a priority queue + */ + qStatus = IX_QMGR_Q_OVERFLOW; + } + else + { + /*there are no buffers in the s/w queues, submit directly*/ + qStatus = ixEthAccQmgrTxWrite(portId, qBuffer, priority); + } + } + else + { + /*there are no buffers in the s/w queues, submit directly*/ + qStatus = ixEthAccQmgrTxWrite(portId, qBuffer, priority); + } + } + else + { + qStatus = IX_QMGR_Q_OVERFLOW; + } + } + else + { + TX_INC(portId,txUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccPortTxFrameSubmit:Error: wrong schedule discipline setup\n", + 0, 0, 0, 0, 0, 0); + return (IX_ETH_ACC_FAIL); + } + + if(qStatus == IX_SUCCESS ) + { + TX_STATS_INC(portId,txQOK); + return IX_ETH_ACC_SUCCESS; + } + else if(qStatus == IX_QMGR_Q_OVERFLOW) + { + TX_STATS_INC(portId,txQDelayed); + /* + * We were unable to write the buffer to the + * appropriate H/W Q, Save it in a s/w Q. + */ + IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL( + ixEthAccPortData[portId]. + ixEthAccTxData.txQ[priority], + buffer); + + qStatus = ixQMgrNotificationEnable( + IX_ETH_ACC_PORT_TO_TX_Q_ID(portId), + IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(portId)); + + if (qStatus != IX_SUCCESS) + { + if (qStatus == IX_QMGR_WARNING) + { + /* notification is enabled for a queue + * which is already empty (the condition is already met) + * and there will be no more queue event to drain the sw queue + */ + TX_STATS_INC(portId,txLateNotificationEnabled); + + /* pull a buffer from the sw queue */ + if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) + !=IX_ETH_ACC_FAIL) + { + /*there are buffers on the s/w queues, submit from them*/ + ixEthAccTxFromSwQ(portId, highestPriority); + } + } + else + { + TX_INC(portId,txUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccPortTxFrameSubmit: unexpected Error: %u\n", + qStatus, 0, 0, 0, 0, 0); + } + } + } + else + { + TX_INC(portId,txUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccPortTxFrameSubmit: unexpected Error: %u\n", + qStatus, 0, 0, 0, 0, 0); + return (IX_ETH_ACC_FAIL); + } + + return (IX_ETH_ACC_SUCCESS); +} + + +/** + * + * @brief replenish: convert a chain of mbufs to the format + * expected by the NPE + * + */ + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccPortRxFreeReplenish(IxEthAccPortId portId, + IX_OSAL_MBUF *buffer) +{ + IX_STATUS qStatus = IX_SUCCESS; + UINT32 qBuffer; + + /* + * Check buffer is valid. + */ + +#ifndef NDEBUG + /* check parameter value */ + if (buffer == 0) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return (IX_ETH_ACC_INVALID_PORT); + } + + /* check initialisation is done */ + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_FATAL_LOG(" ixEthAccPortRxFreeReplenish: Unavailable Eth %d: Cannot replenish Rx Free Q.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_PORT_UNINITIALIZED ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + /* check boundaries and constraints */ + if (IX_OSAL_MBUF_MLEN(buffer) < IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN) + { + return (IX_ETH_ACC_FAIL); + } +#endif + + qBuffer = ixEthAccMbufRxQPrepare(buffer); + + /* + * Add The Rx Buffer to the H/W Free buffer Q if possible + */ + qStatus = ixEthAccQmgrLockRxWrite(portId, qBuffer); + + if (qStatus == IX_SUCCESS) + { + RX_STATS_INC(portId,rxFreeRepOK); + /* + * Buffer added to h/w Q. + */ + return (IX_SUCCESS); + } + else if (qStatus == IX_QMGR_Q_OVERFLOW) + { + RX_STATS_INC(portId,rxFreeRepDelayed); + /* + * We were unable to write the buffer to the approprate H/W Q, + * Save it in a s/w Q. + */ + IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL( + ixEthAccPortData[portId].ixEthAccRxData.freeBufferList, + buffer); + + qStatus = ixQMgrNotificationEnable( + IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId), + IX_ETH_ACC_PORT_TO_RX_FREE_Q_SOURCE(portId)); + + if (qStatus != IX_SUCCESS) + { + if (qStatus == IX_QMGR_WARNING) + { + /* notification is enabled for a queue + * which is already empty (the condition is already met) + * and there will be no more queue event to drain the sw queue + * move an entry from the sw queue to the hw queue */ + RX_STATS_INC(portId,rxFreeLateNotificationEnabled); + ixEthAccRxFreeFromSwQ(portId); + } + else + { + RX_INC(portId,rxUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccRxPortFreeReplenish:Error: %u\n", + qStatus, 0, 0, 0, 0, 0); + } + } + } + else + { + RX_INC(portId,rxUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthAccRxPortFreeReplenish:Error: qStatus = %u\n", + (UINT32)qStatus, 0, 0, 0, 0, 0); + return(IX_ETH_ACC_FAIL); + } + return (IX_ETH_ACC_SUCCESS); +} + + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccTxSchedulingDisciplineSetPriv(IxEthAccPortId portId, + IxEthAccSchedulerDiscipline + sched) +{ + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return (IX_ETH_ACC_INVALID_PORT); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("ixEthAccTxSchedulingDisciplineSet: Unavailable Eth %d: Cannot set Tx Scheduling Discipline.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + if (sched != FIFO_PRIORITY && sched != FIFO_NO_PRIORITY) + { + return (IX_ETH_ACC_INVALID_ARG); + } + + ixEthAccPortData[portId].ixEthAccTxData.schDiscipline = sched; + return (IX_ETH_ACC_SUCCESS); +} + +IX_ETH_ACC_PUBLIC +IxEthAccStatus ixEthAccRxSchedulingDisciplineSetPriv(IxEthAccSchedulerDiscipline + sched) +{ + if (sched != FIFO_PRIORITY && sched != FIFO_NO_PRIORITY) + { + return (IX_ETH_ACC_INVALID_ARG); + } + + ixEthAccDataInfo.schDiscipline = sched; + + return (IX_ETH_ACC_SUCCESS); +} + + +/** + * @fn ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) + * + * @brief process incoming frame : + * + * @param @ref IxQMgrCallback IxQMgrMultiBufferCallback + * + * @return none + * + * @internal + * + */ +IX_ETH_ACC_PRIVATE BOOL +ixEthRxFrameProcess(IxEthAccPortId portId, IX_OSAL_MBUF *mbufPtr) +{ + UINT32 flags; + IxEthDBStatus result; + +#ifndef NDEBUG + /* Prudent to at least check the port is within range */ + if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFrameProcess: Illegal port: %u\n", + (UINT32)portId, 0, 0, 0, 0, 0); + return FALSE; + } +#endif + + /* convert fields from mbuf header */ + ixEthAccMbufFromRxQ(mbufPtr); + + /* check about any special processing for this frame */ + flags = IX_ETHACC_NE_FLAGS(mbufPtr); + if ((flags & (IX_ETHACC_NE_FILTERMASK | IX_ETHACC_NE_NEWSRCMASK)) == 0) + { + /* "best case" scenario : nothing special to do for this frame */ + return TRUE; + } + +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + /* if a new source MAC address is detected by the NPE, + * update IxEthDB with the portId and the MAC address. + */ + if ((flags & IX_ETHACC_NE_NEWSRCMASK & ixEthAccNewSrcMask) != 0) + { + result = ixEthDBFilteringDynamicEntryProvision(portId, + (IxEthDBMacAddr *) IX_ETHACC_NE_SOURCEMAC(mbufPtr)); + + if (result != IX_ETH_DB_SUCCESS && result != IX_ETH_DB_FEATURE_UNAVAILABLE) + { + if ((ixEthAccMacState[portId].portDisableState == ACTIVE) && (result != IX_ETH_DB_BUSY)) + { + RX_STATS_INC(portId, rxUnexpectedError); + IX_ETH_ACC_FATAL_LOG("ixEthRxFrameProcess: Failed to add source MAC \ + to the Learning/Filtering database\n", 0, 0, 0, 0, 0, 0); + } + else + { + /* we expect this to fail during PortDisable, as EthDB is disabled for + * that port and will refuse to learn new addresses + */ + } + } + else + { + RX_STATS_INC(portId, rxUnlearnedMacAddress); + } + } +#endif + + /* check if this frame should have been filtered + * by the NPE and take the appropriate action + */ + if (((flags & IX_ETHACC_NE_FILTERMASK) != 0) + && (ixEthAccMacState[portId].portDisableState == ACTIVE)) + { + /* If the mbuf was allocated with a small data size, or the current data pointer is not + * within the allocated data area, then the buffer is non-standard and has to be + * replenished with the minimum size only + */ + if( (IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr) < IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN) + || ((UINT8 *)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr) > IX_OSAL_MBUF_MDATA(mbufPtr)) + || ((UINT8 *)(IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr) + + IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr)) + < IX_OSAL_MBUF_MDATA(mbufPtr)) ) + { + /* set to minimum length */ + IX_OSAL_MBUF_MLEN(mbufPtr) = IX_OSAL_MBUF_PKT_LEN(mbufPtr) = + IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN; + } + else + { + /* restore original length */ + IX_OSAL_MBUF_MLEN(mbufPtr) = IX_OSAL_MBUF_PKT_LEN(mbufPtr) = + ( IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(mbufPtr) - + (IX_OSAL_MBUF_MDATA(mbufPtr) - (UINT8 *)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(mbufPtr)) ); + } + + /* replenish from here */ + if (ixEthAccPortRxFreeReplenish(portId, mbufPtr) != IX_ETH_ACC_SUCCESS) + { + IX_ETH_ACC_FATAL_LOG("ixEthRxFrameProcess: Failed to replenish with filtered frame\ + on port %d\n", portId, 0, 0, 0, 0, 0); + } + + RX_STATS_INC(portId, rxFiltered); + + /* indicate that frame should not be subjected to further processing */ + return FALSE; + } + + return TRUE; +} + + +/** + * @fn ixEthRxFrameQMCallback + * + * @brief receive callback for Frame receive Q from NPE + * + * Frames are passed one-at-a-time to the user + * + * @param @ref IxQMgrCallback + * + * @return none + * + * @internal + * + * Design note : while processing the entry X, entry X+1 is preloaded + * into memory to reduce the number of stall cycles + * + */ +void ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) +{ + IX_OSAL_MBUF *mbufPtr; + IX_OSAL_MBUF *nextMbufPtr; + UINT32 qEntry; + UINT32 nextQEntry; + UINT32 *qEntryPtr; + UINT32 portId; + UINT32 destPortId; + UINT32 npeId; + UINT32 rxQReadStatus; + + /* + * Design note : entries are read in a buffer, This buffer contains + * an extra zeroed entry so the loop will + * always terminate on a null entry, whatever the result of Burst read is. + */ + UINT32 rxQEntry[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1]; + + /* + * Indication of the number of times the callback is used. + */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackCounter); + + do + { + /* + * Indication of the number of times the queue is drained + */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackBurstRead); + + /* ensure the last entry of the array contains a zeroed value */ + qEntryPtr = rxQEntry; + qEntryPtr[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK] = 0; + + rxQReadStatus = ixQMgrQBurstRead(qId, + IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK, + qEntryPtr); + +#ifndef NDEBUG + if ((rxQReadStatus != IX_QMGR_Q_UNDERFLOW) + && (rxQReadStatus != IX_SUCCESS)) + { + ixEthAccDataStats.unexpectedError++; + /*major error*/ + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFrameQMCallback:Error: %u\n", + (UINT32)rxQReadStatus, 0, 0, 0, 0, 0); + return; + } +#endif + + /* convert and preload the next entry + * (the conversion function takes care about null pointers which + * are used to mark the end of the loop) + */ + nextQEntry = *qEntryPtr; + nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, + IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); + + while(nextQEntry != 0) + { + /* get the next entry */ + qEntry = nextQEntry; + mbufPtr = nextMbufPtr; + +#ifndef NDEBUG + if (mbufPtr == NULL) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFrameQMCallback: Null Mbuf Ptr\n", + 0, 0, 0, 0, 0, 0); + return; + } +#endif + + /* convert the next entry + * (the conversion function takes care about null pointers which + * are used to mark the end of the loop) + */ + nextQEntry = *(++qEntryPtr); + nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, + IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); + + /* + * Get Port and Npe ID from message. + */ + npeId = ((IX_ETHNPE_QM_Q_RXENET_NPEID_MASK & + qEntry) >> IX_ETHNPE_QM_Q_FIELD_NPEID_R); + portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); + + /* process frame, check the return code and skip the remaining of + * the loop if the frame is to be filtered out + */ + if (ixEthRxFrameProcess(portId, mbufPtr)) + { + /* destination portId for this packet */ + destPortId = IX_ETHACC_NE_DESTPORTID(mbufPtr); + + if (destPortId != IX_ETH_DB_UNKNOWN_PORT) + { + destPortId = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(destPortId); + } + + /* test if QoS is enabled in ethAcc + */ + if (ixEthAccDataInfo.schDiscipline == FIFO_PRIORITY) + { + /* check if there is a higher priority queue + * which may require processing and then process it. + */ + if (ixEthAccDataInfo.higherPriorityQueue[qId] < IX_QMGR_MAX_NUM_QUEUES) + { + ixEthRxFrameQMCallback(ixEthAccDataInfo.higherPriorityQueue[qId], + callbackId); + } + } + + /* + * increment priority stats + */ + RX_STATS_INC(portId,rxPriority[IX_ETHACC_NE_QOS(mbufPtr)]); + + /* + * increment callback count stats + */ + RX_STATS_INC(portId,rxFrameClientCallback); + + /* + * Call user level callback. + */ + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn( + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag, + mbufPtr, + destPortId); + } + } + } while (rxQReadStatus == IX_SUCCESS); +} + +/** + * @fn ixEthRxMultiBufferQMCallback + * + * @brief receive callback for Frame receive Q from NPE + * + * Frames are passed as an array to the user + * + * @param @ref IxQMgrCallback + * + * @return none + * + * @internal + * + * Design note : while processing the entry X, entry X+1 is preloaded + * into memory to reduce the number of stall cycles + * + */ +void ixEthRxMultiBufferQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) +{ + IX_OSAL_MBUF *mbufPtr; + IX_OSAL_MBUF *nextMbufPtr; + UINT32 qEntry; + UINT32 nextQEntry; + UINT32 *qEntryPtr; + UINT32 portId; + UINT32 npeId; + UINT32 rxQReadStatus; + /* + * Design note : entries are read in a static buffer, This buffer contains + * an extra zeroed entry so the loop will + * always terminate on a null entry, whatever the result of Burst read is. + */ + static UINT32 rxQEntry[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1]; + static IX_OSAL_MBUF *rxMbufPortArray[IX_ETH_ACC_NUMBER_OF_PORTS][IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK + 1]; + IX_OSAL_MBUF **rxMbufPtr[IX_ETH_ACC_NUMBER_OF_PORTS]; + + for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + rxMbufPtr[portId] = rxMbufPortArray[portId]; + } + + /* + * Indication of the number of times the callback is used. + */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackCounter); + + do + { + /* + * Indication of the number of times the queue is drained + */ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.rxCallbackBurstRead); + + /* ensure the last entry of the array contains a zeroed value */ + qEntryPtr = rxQEntry; + qEntryPtr[IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK] = 0; + + rxQReadStatus = ixQMgrQBurstRead(qId, + IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK, + qEntryPtr); + +#ifndef NDEBUG + if ((rxQReadStatus != IX_QMGR_Q_UNDERFLOW) + && (rxQReadStatus != IX_SUCCESS)) + { + ixEthAccDataStats.unexpectedError++; + /*major error*/ + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFrameMultiBufferQMCallback:Error: %u\n", + (UINT32)rxQReadStatus, 0, 0, 0, 0, 0); + return; + } +#endif + + /* convert and preload the next entry + * (the conversion function takes care about null pointers which + * are used to mark the end of the loop) + */ + nextQEntry = *qEntryPtr; + nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, + IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); + + while(nextQEntry != 0) + { + /* get the next entry */ + qEntry = nextQEntry; + mbufPtr = nextMbufPtr; + +#ifndef NDEBUG + if (mbufPtr == NULL) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFrameMultiBufferQMCallback:Error: Null Mbuf Ptr\n", + 0, 0, 0, 0, 0, 0); + return; + } +#endif + + /* convert the next entry + * (the conversion function takes care about null pointers which + * are used to mark the end of the loop) + */ + nextQEntry = *(++qEntryPtr); + nextMbufPtr = ixEthAccEntryFromQConvert(nextQEntry, + IX_ETHNPE_QM_Q_RXENET_ADDR_MASK); + + /* + * Get Port and Npe ID from message. + */ + npeId = ((IX_ETHNPE_QM_Q_RXENET_NPEID_MASK & + qEntry) >> + IX_ETHNPE_QM_Q_FIELD_NPEID_R); + portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); + + /* skip the remaining of the loop if the frame is + * to be filtered out + */ + if (ixEthRxFrameProcess(portId, mbufPtr)) + { + /* store a mbuf pointer in an array */ + *rxMbufPtr[portId]++ = mbufPtr; + + /* + * increment priority stats + */ + RX_STATS_INC(portId,rxPriority[IX_ETHACC_NE_QOS(mbufPtr)]); + } + + /* test for QoS enabled in ethAcc */ + if (ixEthAccDataInfo.schDiscipline == FIFO_PRIORITY) + { + /* check if there is a higher priority queue + * which may require processing and then process it. + */ + if (ixEthAccDataInfo.higherPriorityQueue[qId] < IX_QMGR_MAX_NUM_QUEUES) + { + ixEthRxMultiBufferQMCallback(ixEthAccDataInfo.higherPriorityQueue[qId], + callbackId); + } + } + } + + /* check if any of the the arrays contains any entry */ + for (portId = 0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + if (rxMbufPtr[portId] != rxMbufPortArray[portId]) + { + /* add a last NULL pointer at the end of the + * array of mbuf pointers + */ + *rxMbufPtr[portId] = NULL; + + /* + * increment callback count stats + */ + RX_STATS_INC(portId,rxFrameClientCallback); + + /* + * Call user level callback with an array of + * buffers (NULL terminated) + */ + ixEthAccPortData[portId].ixEthAccRxData. + rxMultiBufferCallbackFn( + ixEthAccPortData[portId].ixEthAccRxData. + rxMultiBufferCallbackTag, + rxMbufPortArray[portId]); + + /* reset the buffer pointer to the beginning of + * the array + */ + rxMbufPtr[portId] = rxMbufPortArray[portId]; + } + } + + } while (rxQReadStatus == IX_SUCCESS); +} + + +/** + * @brief rxFree low event handler + * + */ +void ixEthRxFreeQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) +{ + IxEthAccPortId portId = (IxEthAccPortId) callbackId; + int lockVal; + UINT32 maxQWritesToPerform = IX_ETH_ACC_MAX_RX_FREE_BUFFERS_LOAD; + IX_STATUS qStatus = IX_SUCCESS; + + /* + * We have reached a low threshold on one of the Rx Free Qs + */ + + /*note that due to the fact that we are working off an Empty threshold, this callback + need only write a single entry to the Rx Free queue in order to re-arm the notification + */ + + RX_STATS_INC(portId,rxFreeLowCallback); + + /* + * Get buffers from approprite S/W Rx freeBufferList Q. + */ + +#ifndef NDEBUG + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFreeQMCallback:Error: Invalid Port 0x%08X\n", + portId, 0, 0, 0, 0, 0); + return; + } +#endif + IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); + if (IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. + ixEthAccRxData.freeBufferList)) + { + /* + * Turn off Q callback notification for Q in Question. + */ + qStatus = ixQMgrNotificationDisable( + IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId)); + + + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); + + if (qStatus != IX_SUCCESS) + { + RX_INC(portId,rxUnexpectedError); + IX_ETH_ACC_FATAL_LOG( + "ixEthRxFreeQMCallback:Error: unexpected QM status 0x%08X\n", + qStatus, 0, 0, 0, 0, 0); + return; + } + } + else + { + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); + /* + * Load the H/W Q with buffers from the s/w Q. + */ + + do + { + /* + * Consume Q entries. - Note Q contains Physical addresss, + * and have already been flushed to memory, + * And endianess converted if required. + */ + if (ixEthAccRxFreeFromSwQ(portId) != IX_SUCCESS) + { + /* + * No more entries in s/w Q. + * Turn off Q callback indication + */ + + IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); + if (IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(ixEthAccPortData[portId]. + ixEthAccRxData.freeBufferList)) + { + qStatus = ixQMgrNotificationDisable( + IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(portId)); + } + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); + break; + } + } + while (--maxQWritesToPerform); + } +} +/** + * @fn Tx queue low event handler + * + */ +void +ixEthTxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) +{ + IxEthAccPortId portId = (IxEthAccPortId) callbackId; + int lockVal; + UINT32 maxQWritesToPerform = IX_ETH_ACC_MAX_TX_FRAME_TX_CONSUME_PER_CALLBACK; + IX_STATUS qStatus = IX_SUCCESS; + IxEthAccTxPriority highestPriority; + + + /* + * We have reached a low threshold on the Tx Q, and are being asked to + * supply a buffer for transmission from our S/W TX queues + */ + TX_STATS_INC(portId,txLowThreshCallback); + + /* + * Get buffers from approprite Q. + */ + +#ifndef NDEBUG + if (!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthTxFrameQMCallback:Error: Invalid Port 0x%08X\n", + portId, 0, 0, 0, 0, 0); + return; + } +#endif + + do + { + /* + * Consume Q entries. - Note Q contains Physical addresss, + * and have already been flushed to memory, + * and endianess already sone if required. + */ + + IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); + + if(ixEthAccTxSwQHighestPriorityGet(portId, &highestPriority) == + IX_ETH_ACC_FAIL) + { + /* + * No more entries in s/w Q. + * Turn off Q callback indication + */ + qStatus = ixQMgrNotificationDisable( + IX_ETH_ACC_PORT_TO_TX_Q_ID(portId)); + + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); + + if (qStatus != IX_SUCCESS) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthTxFrameQMCallback:Error: unexpected QM status 0x%08X\n", + qStatus, 0, 0, 0, 0, 0); + } + + return; + } + else + { + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); + if (ixEthAccTxFromSwQ(portId,highestPriority)!=IX_SUCCESS) + { + /* nothing left in the sw queue or the hw queues are + * full. There is no point to continue to drain the + * sw queues + */ + return; + } + } + } + while (--maxQWritesToPerform); +} + +/** + * @brief TxDone event handler + * + * Design note : while processing the entry X, entry X+1 is preloaded + * into memory to reduce the number of stall cycles + * + */ + +void +ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId) +{ + IX_OSAL_MBUF *mbufPtr; + UINT32 qEntry; + UINT32 *qEntryPtr; + UINT32 txDoneQReadStatus; + UINT32 portId; + UINT32 npeId; + + /* + * Design note : entries are read in a static buffer, This buffer contains + * an extra entyry (which is zeroed by the compiler), so the loop will + * always terminate on a null entry, whatever the result of Burst read is. + */ + static UINT32 txDoneQEntry[IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK + 1]; + + /* + * Indication that Tx frames have been transmitted from the NPE. + */ + + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.txDoneCallbackCounter); + + do{ + qEntryPtr = txDoneQEntry; + txDoneQReadStatus = ixQMgrQBurstRead(IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, + IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK, + qEntryPtr); + +#ifndef NDEBUG + if (txDoneQReadStatus != IX_QMGR_Q_UNDERFLOW + && (txDoneQReadStatus != IX_SUCCESS)) + { + /*major error*/ + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthTxFrameDoneQMCallback:Error: %u\n", + (UINT32)txDoneQReadStatus, 0, 0, 0, 0, 0); + return; + } +#endif + + qEntry = *qEntryPtr; + + while(qEntry != 0) + { + mbufPtr = ixEthAccEntryFromQConvert(qEntry, + IX_ETHNPE_QM_Q_TXENET_ADDR_MASK); + +#ifndef NDEBUG + if (mbufPtr == NULL) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthTxFrameDoneQMCallback:Error: Null Mbuf Ptr\n", + 0, 0, 0, 0, 0, 0); + return; + } +#endif + + /* endianness conversions and stats updates */ + ixEthAccMbufFromTxQ(mbufPtr); + + /* + * Get NPE id from message, then convert to portId. + */ + npeId = ((IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK & + qEntry) >> + IX_ETHNPE_QM_Q_FIELD_NPEID_R); + portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); + +#ifndef NDEBUG + /* Prudent to at least check the port is within range */ + if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) + { + ixEthAccDataStats.unexpectedError++; + IX_ETH_ACC_FATAL_LOG( + "ixEthTxFrameDoneQMCallback: Illegal port: %u\n", + (UINT32)portId, 0, 0, 0, 0, 0); + return; + } +#endif + + TX_STATS_INC(portId,txDoneClientCallback); + + /* + * Call user level callback. + */ + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn( + ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag, + mbufPtr); + + /* move to next queue entry */ + qEntry = *(++qEntryPtr); + + } + } while( txDoneQReadStatus == IX_SUCCESS ); +} + +IX_ETH_ACC_PUBLIC +void ixEthAccDataPlaneShow(void) +{ + UINT32 numTx0Entries; + UINT32 numTx1Entries; + UINT32 numTxDoneEntries; + UINT32 numRxEntries; + UINT32 numRxFree0Entries; + UINT32 numRxFree1Entries; + UINT32 portId; +#ifdef __ixp46X + UINT32 numTx2Entries; + UINT32 numRxFree2Entries; +#endif +#ifndef NDEBUG + UINT32 priority; + UINT32 numBuffersInRx=0; + UINT32 numBuffersInTx=0; + UINT32 numBuffersInSwQ=0; + UINT32 totalBuffers=0; + UINT32 rxFreeCallbackCounter = 0; + UINT32 txCallbackCounter = 0; +#endif + UINT32 key; + + /* snapshot of stats */ + IxEthAccTxDataStats tx[IX_ETH_ACC_NUMBER_OF_PORTS]; + IxEthAccRxDataStats rx[IX_ETH_ACC_NUMBER_OF_PORTS]; + IxEthAccDataPlaneStats stats; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return; + } + + /* get a reliable snapshot */ + key = ixOsalIrqLock(); + + numTx0Entries = 0; + ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET0_Q, &numTx0Entries); + numTx1Entries = 0; + ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET1_Q, &numTx1Entries); + numTxDoneEntries = 0; + ixQMgrQNumEntriesGet( IX_ETH_ACC_TX_FRAME_DONE_ETH_Q, &numTxDoneEntries); + numRxEntries = 0; + ixEthAccQMgrRxQEntryGet(&numRxEntries); + numRxFree0Entries = 0; + ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q, &numRxFree0Entries); + numRxFree1Entries = 0; + ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q, &numRxFree1Entries); + +#ifdef __ixp46X + numTx2Entries = 0; + ixQMgrQNumEntriesGet(IX_ETH_ACC_TX_FRAME_ENET2_Q, &numTx2Entries); + numRxFree2Entries = 0; + ixQMgrQNumEntriesGet(IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q, &numRxFree2Entries); +#endif + + for(portId=IX_ETH_PORT_1; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + memcpy(&tx[portId], + &ixEthAccPortData[portId].ixEthAccTxData.stats, + sizeof(tx[portId])); + memcpy(&rx[portId], + &ixEthAccPortData[portId].ixEthAccRxData.stats, + sizeof(rx[portId])); + } + memcpy(&stats, &ixEthAccDataStats, sizeof(stats)); + + ixOsalIrqUnlock(key); + +#ifdef NDEBUG + printf("Detailed statistics collection not supported in this load\n"); +#endif + + /* print snapshot */ + for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if ((IX_ETH_PORT_1 == portId) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + continue ; + } + if ((IX_ETH_PORT_2 == portId) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + continue ; + } + if ((IX_ETH_PORT_3 == portId) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + continue ; + } + } + + printf("PORT %u --------------------------------\n", + portId); +#ifndef NDEBUG + printf("Tx Done Frames : %u\n", + tx[portId].txDoneClientCallback + + tx[portId].txDoneSwQDuringDisable + + tx[portId].txDoneDuringDisable); + printf("Tx Frames : %u\n", + tx[portId].txQOK + tx[portId].txQDelayed); + printf("Tx H/W Q Added OK : %u\n", + tx[portId].txQOK); + printf("Tx H/W Q Delayed : %u\n", + tx[portId].txQDelayed); + printf("Tx From S/W Q Added OK : %u\n", + tx[portId].txFromSwQOK); + printf("Tx From S/W Q Delayed : %u\n", + tx[portId].txFromSwQDelayed); + printf("Tx Overflow : %u\n", + tx[portId].txOverflow); + printf("Tx Mutual Lock : %u\n", + tx[portId].txLock); + printf("Tx Late Ntf Enabled : %u\n", + tx[portId].txLateNotificationEnabled); + printf("Tx Low Thresh CB : %u\n", + tx[portId].txLowThreshCallback); + printf("Tx Done from H/W Q (Disable) : %u\n", + tx[portId].txDoneDuringDisable); + printf("Tx Done from S/W Q (Disable) : %u\n", + tx[portId].txDoneSwQDuringDisable); + for (priority = IX_ETH_ACC_TX_PRIORITY_0; + priority <= IX_ETH_ACC_TX_PRIORITY_7; + priority++) + { + if (tx[portId].txPriority[priority]) + { + printf("Tx Priority %u : %u\n", + priority, + tx[portId].txPriority[priority]); + } + } +#endif + printf("Tx unexpected errors : %u (should be 0)\n", + tx[portId].txUnexpectedError); + +#ifndef NDEBUG + printf("Rx Frames : %u\n", + rx[portId].rxFrameClientCallback + + rx[portId].rxSwQDuringDisable+ + rx[portId].rxDuringDisable); + printf("Rx Free Replenish : %u\n", + rx[portId].rxFreeRepOK + rx[portId].rxFreeRepDelayed); + printf("Rx Free H/W Q Added OK : %u\n", + rx[portId].rxFreeRepOK); + printf("Rx Free H/W Q Delayed : %u\n", + rx[portId].rxFreeRepDelayed); + printf("Rx Free From S/W Q Added OK : %u\n", + rx[portId].rxFreeRepFromSwQOK); + printf("Rx Free From S/W Q Delayed : %u\n", + rx[portId].rxFreeRepFromSwQDelayed); + printf("Rx Free Overflow : %u\n", + rx[portId].rxFreeOverflow); + printf("Rx Free Mutual Lock : %u\n", + rx[portId].rxFreeLock); + printf("Rx Free Late Ntf Enabled : %u\n", + rx[portId].rxFreeLateNotificationEnabled); + printf("Rx Free Low CB : %u\n", + rx[portId].rxFreeLowCallback); + printf("Rx From H/W Q (Disable) : %u\n", + rx[portId].rxDuringDisable); + printf("Rx From S/W Q (Disable) : %u\n", + rx[portId].rxSwQDuringDisable); + printf("Rx unlearned Mac Address : %u\n", + rx[portId].rxUnlearnedMacAddress); + printf("Rx Filtered (Rx => RxFree) : %u\n", + rx[portId].rxFiltered); + + for (priority = IX_ETH_ACC_TX_PRIORITY_0; + priority <= IX_ETH_ACC_TX_PRIORITY_7; + priority++) + { + if (rx[portId].rxPriority[priority]) + { + printf("Rx Priority %u : %u\n", + priority, + rx[portId].rxPriority[priority]); + } + } +#endif + printf("Rx unexpected errors : %u (should be 0)\n", + rx[portId].rxUnexpectedError); + +#ifndef NDEBUG + numBuffersInTx = tx[portId].txQOK + + tx[portId].txQDelayed - + tx[portId].txDoneClientCallback - + tx[portId].txDoneSwQDuringDisable - + tx[portId].txDoneDuringDisable; + + printf("# Tx Buffers currently for transmission : %u\n", + numBuffersInTx); + + numBuffersInRx = rx[portId].rxFreeRepOK + + rx[portId].rxFreeRepDelayed - + rx[portId].rxFrameClientCallback - + rx[portId].rxSwQDuringDisable - + rx[portId].rxDuringDisable; + + printf("# Rx Buffers currently for reception : %u\n", + numBuffersInRx); + + totalBuffers += numBuffersInRx + numBuffersInTx; +#endif + } + + printf("---------------------------------------\n"); + +#ifndef NDEBUG + printf("\n"); + printf("Mbufs :\n"); + printf("Tx Unchained mbufs : %u\n", + stats.unchainedTxMBufs); + printf("Tx Chained bufs : %u\n", + stats.chainedTxMBufs); + printf("TxDone Unchained mbufs : %u\n", + stats.unchainedTxDoneMBufs); + printf("TxDone Chained bufs : %u\n", + stats.chainedTxDoneMBufs); + printf("RxFree Unchained mbufs : %u\n", + stats.unchainedRxFreeMBufs); + printf("RxFree Chained bufs : %u\n", + stats.chainedRxFreeMBufs); + printf("Rx Unchained mbufs : %u\n", + stats.unchainedRxMBufs); + printf("Rx Chained bufs : %u\n", + stats.chainedRxMBufs); + + printf("\n"); + printf("Software queue usage :\n"); + printf("Buffers added to S/W Q : %u\n", + stats.addToSwQ); + printf("Buffers removed from S/W Q : %u\n", + stats.removeFromSwQ); + + printf("\n"); + printf("Hardware queues callbacks :\n"); + + for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + rxFreeCallbackCounter += rx[portId].rxFreeLowCallback; + txCallbackCounter += tx[portId].txLowThreshCallback; + } + printf("Tx Done QM Callback invoked : %u\n", + stats.txDoneCallbackCounter); + printf("Tx QM Callback invoked : %u\n", + txCallbackCounter); + printf("Rx QM Callback invoked : %u\n", + stats.rxCallbackCounter); + printf("Rx QM Callback burst read : %u\n", + stats.rxCallbackBurstRead); + printf("Rx Free QM Callback invoked : %u\n", + rxFreeCallbackCounter); +#endif + printf("Unexpected errors in CB : %u (should be 0)\n", + stats.unexpectedError); + printf("\n"); + + printf("Hardware queues levels :\n"); + printf("Transmit Port 1 Q : %u \n",numTx0Entries); + printf("Transmit Port 2 Q : %u \n",numTx1Entries); +#ifdef __ixp46X + printf("Transmit Port 3 Q : %u \n",numTx2Entries); +#endif + printf("Transmit Done Q : %u \n",numTxDoneEntries); + printf("Receive Q : %u \n",numRxEntries); + printf("Receive Free Port 1 Q : %u \n",numRxFree0Entries); + printf("Receive Free Port 2 Q : %u \n",numRxFree1Entries); +#ifdef __ixp46X + printf("Receive Free Port 3 Q : %u \n",numRxFree2Entries); +#endif + +#ifndef NDEBUG + printf("\n"); + printf("# Total Buffers accounted for : %u\n", + totalBuffers); + + numBuffersInSwQ = ixEthAccDataStats.addToSwQ - + ixEthAccDataStats.removeFromSwQ; + + printf(" Buffers in S/W Qs : %u\n", + numBuffersInSwQ); + printf(" Buffers in H/W Qs or NPEs : %u\n", + totalBuffers - numBuffersInSwQ); +#endif + + printf("Rx QoS Discipline : %s\n", + (ixEthAccDataInfo.schDiscipline == + FIFO_PRIORITY ) ? "Enabled" : "Disabled"); + + for(portId=0; portId < IX_ETH_ACC_NUMBER_OF_PORTS; portId++) + { + printf("Tx QoS Discipline port %u : %s\n", + portId, + (ixEthAccPortData[portId].ixEthAccTxData.schDiscipline == + FIFO_PRIORITY ) ? "Enabled" : "Disabled"); + } + printf("\n"); +} + + + + + diff --git a/drivers/net/npe/IxEthAccMac.c b/drivers/net/npe/IxEthAccMac.c new file mode 100644 index 0000000000..369ee91d94 --- /dev/null +++ b/drivers/net/npe/IxEthAccMac.c @@ -0,0 +1,2641 @@ +/** + * @file IxEthAccMac.c + * + * @author Intel Corporation + * @date + * + * @brief MAC control functions + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" +#include "IxNpeMh.h" +#ifdef CONFIG_IXP425_COMPONENT_ETHDB +#include "IxEthDB.h" +#endif +#include "IxEthDBPortDefs.h" +#include "IxEthNpe.h" +#include "IxEthAcc.h" +#include "IxEthAccDataPlane_p.h" +#include "IxEthAcc_p.h" +#include "IxEthAccMac_p.h" + +/* Maximum number of retries during ixEthAccPortDisable, which + * is approximately 10 seconds +*/ +#define IX_ETH_ACC_MAX_RETRY 500 + +/* Maximum number of retries during ixEthAccPortDisable when expecting + * timeout + */ +#define IX_ETH_ACC_MAX_RETRY_TIMEOUT 5 + +#define IX_ETH_ACC_VALIDATE_PORT_ID(portId) \ + do \ + { \ + if(!IX_ETH_ACC_IS_PORT_VALID(portId)) \ + { \ + return IX_ETH_ACC_INVALID_PORT; \ + } \ + } while(0) + +PUBLIC IxEthAccMacState ixEthAccMacState[IX_ETH_ACC_NUMBER_OF_PORTS]; + +PRIVATE UINT32 ixEthAccMacBase[IX_ETH_ACC_NUMBER_OF_PORTS]; + +/*Forward function declarations*/ +PRIVATE void +ixEthAccPortDisableRx (IxEthAccPortId portId, + IX_OSAL_MBUF * mBufPtr, + BOOL useMultiBufferCallback); + +PRIVATE void +ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId, + IX_OSAL_MBUF * mBufPtr, + BOOL useMultiBufferCallback); + +PRIVATE void +ixEthAccPortDisableTxDone (UINT32 cbTag, + IX_OSAL_MBUF *mbuf); + +PRIVATE void +ixEthAccPortDisableTxDoneAndSubmit (UINT32 cbTag, + IX_OSAL_MBUF *mbuf); + +PRIVATE void +ixEthAccPortDisableRxCallback (UINT32 cbTag, + IX_OSAL_MBUF * mBufPtr, + UINT32 learnedPortId); + +PRIVATE void +ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag, + IX_OSAL_MBUF **mBufPtr); + +PRIVATE IxEthAccStatus +ixEthAccPortDisableTryTransmit(UINT32 portId); + +PRIVATE IxEthAccStatus +ixEthAccPortDisableTryReplenish(UINT32 portId); + +PRIVATE IxEthAccStatus +ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +PRIVATE IxEthAccStatus +ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +PRIVATE void +ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId, + IxNpeMhMessage msg); + +PRIVATE void +ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId, + IxNpeMhMessage msg); + +PRIVATE void +ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId, + IxNpeMhMessage msg); + +PRIVATE void +ixEthAccMulticastAddressSet(IxEthAccPortId portId); + +PRIVATE BOOL +ixEthAccMacEqual(IxEthAccMacAddr *macAddr1, + IxEthAccMacAddr *macAddr2); + +PRIVATE void +ixEthAccMacPrint(IxEthAccMacAddr *m); + +PRIVATE void +ixEthAccMacStateUpdate(IxEthAccPortId portId); + +IxEthAccStatus +ixEthAccMacMemInit(void) +{ + ixEthAccMacBase[IX_ETH_PORT_1] = + (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE, + IX_OSAL_IXP400_ETHA_MAP_SIZE); + ixEthAccMacBase[IX_ETH_PORT_2] = + (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_1_BASE, + IX_OSAL_IXP400_ETHB_MAP_SIZE); +#ifdef __ixp46X + ixEthAccMacBase[IX_ETH_PORT_3] = + (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_2_BASE, + IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE); + if (ixEthAccMacBase[IX_ETH_PORT_3] == 0) + { + ixOsalLog(IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDOUT, + "EthAcc: Could not map MAC I/O memory\n", + 0, 0, 0, 0, 0 ,0); + + return IX_ETH_ACC_FAIL; + } +#endif + + if (ixEthAccMacBase[IX_ETH_PORT_1] == 0 + || ixEthAccMacBase[IX_ETH_PORT_2] == 0) + { + ixOsalLog(IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDOUT, + "EthAcc: Could not map MAC I/O memory\n", + 0, 0, 0, 0, 0 ,0); + + return IX_ETH_ACC_FAIL; + } + + return IX_ETH_ACC_SUCCESS; +} + +void +ixEthAccMacUnload(void) +{ + IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_1]); + IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_2]); +#ifdef __ixp46X + IX_OSAL_MEM_UNMAP(ixEthAccMacBase[IX_ETH_PORT_3]); + ixEthAccMacBase[IX_ETH_PORT_3] = 0; +#endif + ixEthAccMacBase[IX_ETH_PORT_2] = 0; + ixEthAccMacBase[IX_ETH_PORT_1] = 0; +} + +IxEthAccStatus +ixEthAccPortEnablePriv(IxEthAccPortId portId) +{ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + printf("EthAcc: (Mac) cannot enable port %d, port not initialized\n", portId); + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + if (ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn == NULL) + { + /* TxDone callback not registered */ + printf("EthAcc: (Mac) cannot enable port %d, TxDone callback not registered\n", portId); + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + if ((ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn == NULL) + && (ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn == NULL)) + { + /* Receive callback not registered */ + printf("EthAcc: (Mac) cannot enable port %d, Rx callback not registered\n", portId); + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + if(!ixEthAccMacState[portId].initDone) + { + printf("EthAcc: (Mac) cannot enable port %d, MAC address not set\n", portId); + return (IX_ETH_ACC_MAC_UNINITIALIZED); + } + + /* if the state is being set to what it is already at, do nothing*/ + if (ixEthAccMacState[portId].enabled) + { + return IX_ETH_ACC_SUCCESS; + } + +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + /* enable ethernet database for this port */ + if (ixEthDBPortEnable(portId) != IX_ETH_DB_SUCCESS) + { + printf("EthAcc: (Mac) cannot enable port %d, EthDB failure\n", portId); + return IX_ETH_ACC_FAIL; + } +#endif + + /* set the MAC core registers */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL2, + IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RANDOM_SEED, + IX_ETH_ACC_RANDOM_SEED_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_THRESH_P_EMPTY, + IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_THRESH_P_FULL, + IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_DEFER, + IX_ETH_ACC_MAC_TX_DEFER_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_TWO_DEFER_1, + IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_TWO_DEFER_2, + IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_SLOT_TIME, + IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_INT_CLK_THRESH, + IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_BUF_SIZE_TX, + IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + IX_ETH_ACC_TX_CNTRL1_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + IX_ETH_ACC_RX_CNTRL1_DEFAULT); + + /* set the global state */ + ixEthAccMacState[portId].portDisableState = ACTIVE; + ixEthAccMacState[portId].enabled = TRUE; + + /* rewrite the setup (including mac filtering) depending + * on current options + */ + ixEthAccMacStateUpdate(portId); + + return IX_ETH_ACC_SUCCESS; +} + +/* + * PortDisable local variables. They contain the intermediate steps + * while the port is being disabled and the buffers being drained out + * of the NPE. + */ +typedef void (*IxEthAccPortDisableRx)(IxEthAccPortId portId, + IX_OSAL_MBUF * mBufPtr, + BOOL useMultiBufferCallback); +static IxEthAccPortRxCallback +ixEthAccPortDisableFn[IX_ETH_ACC_NUMBER_OF_PORTS]; +static IxEthAccPortMultiBufferRxCallback +ixEthAccPortDisableMultiBufferFn[IX_ETH_ACC_NUMBER_OF_PORTS]; +static IxEthAccPortDisableRx +ixEthAccPortDisableRxTable[IX_ETH_ACC_NUMBER_OF_PORTS]; +static UINT32 +ixEthAccPortDisableCbTag[IX_ETH_ACC_NUMBER_OF_PORTS]; +static UINT32 +ixEthAccPortDisableMultiBufferCbTag[IX_ETH_ACC_NUMBER_OF_PORTS]; + +static IxEthAccPortTxDoneCallback +ixEthAccPortDisableTxDoneFn[IX_ETH_ACC_NUMBER_OF_PORTS]; +static UINT32 +ixEthAccPortDisableTxDoneCbTag[IX_ETH_ACC_NUMBER_OF_PORTS]; + +static UINT32 +ixEthAccPortDisableUserBufferCount[IX_ETH_ACC_NUMBER_OF_PORTS]; + +/* + * PortDisable private callbacks functions. They handle the user + * traffic, and the special buffers (one for tx, one for rx) used + * in portDisable. + */ +PRIVATE void +ixEthAccPortDisableTxDone(UINT32 cbTag, + IX_OSAL_MBUF *mbuf) +{ + IxEthAccPortId portId = (IxEthAccPortId)cbTag; + volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState; + + /* check for the special mbuf used in portDisable */ + if (mbuf == ixEthAccMacState[portId].portDisableTxMbufPtr) + { + *txState = TRANSMIT_DONE; + } + else + { + /* increment the count of user traffic during portDisable */ + ixEthAccPortDisableUserBufferCount[portId]++; + + /* call client TxDone function */ + ixEthAccPortDisableTxDoneFn[portId](ixEthAccPortDisableTxDoneCbTag[portId], mbuf); + } +} + +PRIVATE IxEthAccStatus +ixEthAccPortDisableTryTransmit(UINT32 portId) +{ + int key; + IxEthAccStatus status = IX_ETH_ACC_SUCCESS; + volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState; + /* transmit the special buffer again if it is transmitted + * and update the txState + * This section is protected because the portDisable context + * run an identical code, so the system keeps transmitting at the + * maximum rate. + */ + key = ixOsalIrqLock(); + if (*txState == TRANSMIT_DONE) + { + IX_OSAL_MBUF *mbufTxPtr = ixEthAccMacState[portId].portDisableTxMbufPtr; + *txState = TRANSMIT; + status = ixEthAccPortTxFrameSubmit(portId, + mbufTxPtr, + IX_ETH_ACC_TX_DEFAULT_PRIORITY); + } + ixOsalIrqUnlock(key); + + return status; +} + +PRIVATE void +ixEthAccPortDisableTxDoneAndSubmit(UINT32 cbTag, + IX_OSAL_MBUF *mbuf) +{ + IxEthAccPortId portId = (IxEthAccPortId)cbTag; + + /* call the callback which forwards the traffic to the client */ + ixEthAccPortDisableTxDone(cbTag, mbuf); + + /* try to transmit the buffer used in portDisable + * if seen in TxDone + */ + ixEthAccPortDisableTryTransmit(portId); +} + +PRIVATE void +ixEthAccPortDisableRx (IxEthAccPortId portId, + IX_OSAL_MBUF * mBufPtr, + BOOL useMultiBufferCallback) +{ + volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState; + IX_OSAL_MBUF *mNextPtr; + + while (mBufPtr) + { + mNextPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr); + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(mBufPtr) = NULL; + + /* check for the special mbuf used in portDisable */ + if (mBufPtr == ixEthAccMacState[portId].portDisableRxMbufPtr) + { + *rxState = RECEIVE; + } + else + { + /* increment the count of user traffic during portDisable */ + ixEthAccPortDisableUserBufferCount[portId]++; + + /* reset the received payload length during portDisable */ + IX_OSAL_MBUF_MLEN(mBufPtr) = 0; + IX_OSAL_MBUF_PKT_LEN(mBufPtr) = 0; + + if (useMultiBufferCallback) + { + /* call the user callback with one unchained + * buffer, without payload. A small array is built + * to be used as a parameter (the user callback expects + * to receive an array ended by a NULL pointer. + */ + IX_OSAL_MBUF *mBufPtrArray[2]; + + mBufPtrArray[0] = mBufPtr; + mBufPtrArray[1] = NULL; + ixEthAccPortDisableMultiBufferFn[portId]( + ixEthAccPortDisableMultiBufferCbTag[portId], + mBufPtrArray); + } + else + { + /* call the user callback with a unchained + * buffer, without payload and the destination port is + * unknown. + */ + ixEthAccPortDisableFn[portId]( + ixEthAccPortDisableCbTag[portId], + mBufPtr, + IX_ETH_DB_UNKNOWN_PORT /* port not found */); + } + } + + mBufPtr = mNextPtr; + } +} + +PRIVATE IxEthAccStatus +ixEthAccPortDisableTryReplenish(UINT32 portId) +{ + int key; + IxEthAccStatus status = IX_ETH_ACC_SUCCESS; + volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState; + /* replenish with the special buffer again if it is received + * and update the rxState + * This section is protected because the portDisable context + * run an identical code, so the system keeps replenishing at the + * maximum rate. + */ + key = ixOsalIrqLock(); + if (*rxState == RECEIVE) + { + IX_OSAL_MBUF *mbufRxPtr = ixEthAccMacState[portId].portDisableRxMbufPtr; + *rxState = REPLENISH; + IX_OSAL_MBUF_MLEN(mbufRxPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE; + status = ixEthAccPortRxFreeReplenish(portId, mbufRxPtr); + } + ixOsalIrqUnlock(key); + + return status; +} + +PRIVATE void +ixEthAccPortDisableRxAndReplenish (IxEthAccPortId portId, + IX_OSAL_MBUF * mBufPtr, + BOOL useMultiBufferCallback) +{ + /* call the callback which forwards the traffic to the client */ + ixEthAccPortDisableRx(portId, mBufPtr, useMultiBufferCallback); + + /* try to replenish with the buffer used in portDisable + * if seen in Rx + */ + ixEthAccPortDisableTryReplenish(portId); +} + +PRIVATE void +ixEthAccPortDisableRxCallback (UINT32 cbTag, + IX_OSAL_MBUF * mBufPtr, + UINT32 learnedPortId) +{ + IxEthAccPortId portId = (IxEthAccPortId)cbTag; + + /* call the portDisable receive callback */ + (ixEthAccPortDisableRxTable[portId])(portId, mBufPtr, FALSE); +} + +PRIVATE void +ixEthAccPortDisableMultiBufferRxCallback (UINT32 cbTag, + IX_OSAL_MBUF **mBufPtr) +{ + IxEthAccPortId portId = (IxEthAccPortId)cbTag; + + while (*mBufPtr) + { + /* call the portDisable receive callback with one buffer at a time */ + (ixEthAccPortDisableRxTable[portId])(portId, *mBufPtr++, TRUE); + } +} + +IxEthAccStatus +ixEthAccPortDisablePriv(IxEthAccPortId portId) +{ + IxEthAccStatus status = IX_ETH_ACC_SUCCESS; + int key; + int retry, retryTimeout; + volatile IxEthAccPortDisableState *state = &ixEthAccMacState[portId].portDisableState; + volatile IxEthAccPortDisableState *rxState = &ixEthAccMacState[portId].rxState; + volatile IxEthAccPortDisableState *txState = &ixEthAccMacState[portId].txState; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable port.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* if the state is being set to what it is already at, do nothing */ + if (!ixEthAccMacState[portId].enabled) + { + return IX_ETH_ACC_SUCCESS; + } + + *state = DISABLED; + + /* disable MAC receive first */ + ixEthAccPortRxDisablePriv(portId); + +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + /* disable ethernet database for this port - It is done now to avoid + * issuing ELT maintenance after requesting 'port disable' in an NPE + */ + if (ixEthDBPortDisable(portId) != IX_ETH_DB_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + IX_ETH_ACC_FATAL_LOG("ixEthAccPortDisable: failed to disable EthDB for this port\n", 0, 0, 0, 0, 0, 0); + } +#endif + + /* enter the critical section */ + key = ixOsalIrqLock(); + + /* swap the Rx and TxDone callbacks */ + ixEthAccPortDisableFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn; + ixEthAccPortDisableMultiBufferFn[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn; + ixEthAccPortDisableCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag; + ixEthAccPortDisableMultiBufferCbTag[portId] = ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag; + ixEthAccPortDisableTxDoneFn[portId] = ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn; + ixEthAccPortDisableTxDoneCbTag[portId] = ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag; + ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRx; + + /* register temporary callbacks */ + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = ixEthAccPortDisableRxCallback; + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = portId; + + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferRxCallback; + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = portId; + + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = ixEthAccPortDisableTxDone; + ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = portId; + + /* initialise the Rx state and Tx states */ + *txState = TRANSMIT_DONE; + *rxState = RECEIVE; + + /* exit the critical section */ + ixOsalIrqUnlock(key); + + /* enable a NPE loopback */ + if (ixEthAccNpeLoopbackEnablePriv(portId) != IX_ETH_ACC_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + } + + if (status == IX_ETH_ACC_SUCCESS) + { + retry = 0; + + /* Step 1 : Drain Tx traffic and TxDone queues : + * + * Transmit and replenish at least once with the + * special buffers until both of them are seen + * in the callback hook + * + * (the receive callback keeps replenishing, so once we see + * the special Tx buffer, we can be sure that Tx drain is complete) + */ + ixEthAccPortDisableRxTable[portId] + = ixEthAccPortDisableRxAndReplenish; + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn + = ixEthAccPortDisableTxDone; + + do + { + /* keep replenishing */ + status = ixEthAccPortDisableTryReplenish(portId); + if (status == IX_ETH_ACC_SUCCESS) + { + /* keep transmitting */ + status = ixEthAccPortDisableTryTransmit(portId); + } + if (status == IX_ETH_ACC_SUCCESS) + { + /* wait for some traffic being processed */ + ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); + } + } + while ((status == IX_ETH_ACC_SUCCESS) + && (retry++ < IX_ETH_ACC_MAX_RETRY) + && (*txState == TRANSMIT)); + + /* Step 2 : Drain Rx traffic, RxFree and Rx queues : + * + * Transmit and replenish at least once with the + * special buffers until both of them are seen + * in the callback hook + * (the transmit callback keeps transmitting, and when we see + * the special Rx buffer, we can be sure that rxFree drain + * is complete) + * + * The nested loop helps to retry if the user was keeping + * replenishing or transmitting during portDisable. + * + * The 2 nested loops ensure more retries if user traffic is + * seen during portDisable : the user should not replenish + * or transmit while portDisable is running. However, because of + * the queueing possibilities in ethAcc dataplane, it is possible + * that a lot of traffic is left in the queues (e.g. when + * transmitting over a low speed link) and therefore, more + * retries are allowed to help flushing the buffers out. + */ + ixEthAccPortDisableRxTable[portId] + = ixEthAccPortDisableRx; + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn + = ixEthAccPortDisableTxDoneAndSubmit; + + do + { + do + { + ixEthAccPortDisableUserBufferCount[portId] = 0; + + /* keep replenishing */ + status = ixEthAccPortDisableTryReplenish(portId); + if (status == IX_ETH_ACC_SUCCESS) + { + /* keep transmitting */ + status = ixEthAccPortDisableTryTransmit(portId); + } + if (status == IX_ETH_ACC_SUCCESS) + { + /* wait for some traffic being processed */ + ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); + } + } + while ((status == IX_ETH_ACC_SUCCESS) + && (retry++ < IX_ETH_ACC_MAX_RETRY) + && ((ixEthAccPortDisableUserBufferCount[portId] != 0) + || (*rxState == REPLENISH))); + + /* After the first iteration, change the receive callbacks, + * to process only 1 buffer at a time + */ + ixEthAccPortDisableRxTable[portId] + = ixEthAccPortDisableRx; + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn + = ixEthAccPortDisableTxDone; + + /* repeat the whole process while user traffic is seen in TxDone + * + * The conditions to stop the loop are + * - Xscale has both Rx and Tx special buffers + * (txState = transmit, rxState = receive) + * - any error in txSubmit or rxReplenish + * - no user traffic seen + * - an excessive amount of retries + */ + } + while ((status == IX_ETH_ACC_SUCCESS) + && (retry < IX_ETH_ACC_MAX_RETRY) + && (*txState == TRANSMIT)); + + /* check the loop exit conditions. The NPE should not hold + * the special buffers. + */ + if ((*rxState == REPLENISH) || (*txState == TRANSMIT)) + { + status = IX_ETH_ACC_FAIL; + } + + if (status == IX_ETH_ACC_SUCCESS) + { + /* Step 3 : Replenish without transmitting until a timeout + * occurs, in order to drain the internal NPE fifos + * + * we can expect a few frames srill held + * in the NPE. + * + * The 2 nested loops take care about the NPE dropping traffic + * (including loopback traffic) when the Rx queue is full. + * + * The timeout value is very conservative + * since the loopback used keeps replenishhing. + * + */ + do + { + ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRxAndReplenish; + ixEthAccPortDisableUserBufferCount[portId] = 0; + retryTimeout = 0; + do + { + /* keep replenishing */ + status = ixEthAccPortDisableTryReplenish(portId); + if (status == IX_ETH_ACC_SUCCESS) + { + /* wait for some traffic being processed */ + ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); + } + } + while ((status == IX_ETH_ACC_SUCCESS) + && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT)); + + /* Step 4 : Transmit once. Stop replenish + * + * After the Rx timeout, we are sure that the NPE does not + * hold any frame in its internal NPE fifos. + * + * At this point, the NPE still holds the last rxFree buffer. + * By transmitting a single frame, this should unblock the + * last rxFree buffer. This code just transmit once and + * wait for both frames seen in TxDone and in rxFree. + * + */ + ixEthAccPortDisableRxTable[portId] = ixEthAccPortDisableRx; + status = ixEthAccPortDisableTryTransmit(portId); + + /* the NPE should immediatelyt release + * the last Rx buffer and the last transmitted buffer + * unless the last Tx frame was dropped (rx queue full) + */ + if (status == IX_ETH_ACC_SUCCESS) + { + retryTimeout = 0; + do + { + ixOsalSleep(IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS); + } + while ((*rxState == REPLENISH) + && (retryTimeout++ < IX_ETH_ACC_MAX_RETRY_TIMEOUT)); + } + + /* the NPE may have dropped the traffic because of Rx + * queue being full. This code ensures that the last + * Tx and Rx frames are both received. + */ + } + while ((status == IX_ETH_ACC_SUCCESS) + && (retry++ < IX_ETH_ACC_MAX_RETRY) + && ((*txState == TRANSMIT) + || (*rxState == REPLENISH) + || (ixEthAccPortDisableUserBufferCount[portId] != 0))); + + /* Step 5 : check the final states : the NPE has + * no buffer left, nor in Tx , nor in Rx directions. + */ + if ((*rxState == REPLENISH) || (*txState == TRANSMIT)) + { + status = IX_ETH_ACC_FAIL; + } + } + + /* now all the buffers are drained, disable NPE loopback + * This is done regardless of the logic to drain the queues and + * the internal buffers held by the NPE. + */ + if (ixEthAccNpeLoopbackDisablePriv(portId) != IX_ETH_ACC_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + } + } + + /* disable MAC Tx and Rx services */ + ixEthAccMacState[portId].enabled = FALSE; + ixEthAccMacStateUpdate(portId); + + /* restore the Rx and TxDone callbacks (within a critical section) */ + key = ixOsalIrqLock(); + + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackFn = ixEthAccPortDisableFn[portId]; + ixEthAccPortData[portId].ixEthAccRxData.rxCallbackTag = ixEthAccPortDisableCbTag[portId]; + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackFn = ixEthAccPortDisableMultiBufferFn[portId]; + ixEthAccPortData[portId].ixEthAccRxData.rxMultiBufferCallbackTag = ixEthAccPortDisableMultiBufferCbTag[portId]; + ixEthAccPortData[portId].ixEthAccTxData.txBufferDoneCallbackFn = ixEthAccPortDisableTxDoneFn[portId]; + ixEthAccPortData[portId].ixEthAccTxData.txCallbackTag = ixEthAccPortDisableTxDoneCbTag[portId]; + + ixOsalIrqUnlock(key); + + /* the MAC core rx/tx disable may left the MAC hardware in an + * unpredictable state. A hw reset is executed before resetting + * all the MAC parameters to a known value. + */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_CORE_CNTRL, + IX_ETH_ACC_CORE_RESET); + + ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY); + + /* rewrite all parameters to their current value */ + ixEthAccMacStateUpdate(portId); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_INT_CLK_THRESH, + IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_CORE_CNTRL, + IX_ETH_ACC_CORE_MDC_EN); + + return status; +} + +IxEthAccStatus +ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled) +{ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable port.\n",(INT32)portId,0,0,0,0,0); + + /* Since Eth NPE is not available, port must be disabled */ + *enabled = FALSE ; + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + /* Since Eth NPE is not available, port must be disabled */ + *enabled = FALSE ; + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + *enabled = ixEthAccMacState[portId].enabled; + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortMacResetPriv(IxEthAccPortId portId) +{ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot reset Ethernet coprocessor.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_CORE_CNTRL, + IX_ETH_ACC_CORE_RESET); + + ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY); + + /* rewrite all parameters to their current value */ + ixEthAccMacStateUpdate(portId); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_INT_CLK_THRESH, + IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_CORE_CNTRL, + IX_ETH_ACC_CORE_MDC_EN); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortLoopbackEnable(IxEthAccPortId portId) +{ + UINT32 regval; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable loopback.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* read register */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + /* update register */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval | IX_ETH_ACC_RX_CNTRL1_LOOP_EN); + + return IX_ETH_ACC_SUCCESS; +} + +PRIVATE void +ixEthAccNpeLoopbackMessageCallback (IxNpeMhNpeId npeId, + IxNpeMhMessage msg) +{ + IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); + +#ifndef NDEBUG + /* Prudent to at least check the port is within range */ + if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) + { + IX_ETH_ACC_FATAL_LOG("IXETHACC:ixEthAccPortDisableMessageCallback: Illegal port: %u\n", + (UINT32) portId, 0, 0, 0, 0, 0); + + return; + } +#endif + + /* unlock message reception mutex */ + ixOsalMutexUnlock(&ixEthAccMacState[portId].npeLoopbackMessageLock); +} + +IxEthAccStatus +ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId) +{ + IX_STATUS npeMhStatus; + IxNpeMhMessage message; + IxEthAccStatus status = IX_ETH_ACC_SUCCESS; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* enable NPE loopback (lsb of the message contains the value 1) */ + message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL) + | 0x01; + message.data[1] = 0; + + npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), + message, + IX_ETHNPE_SETLOOPBACK_MODE_ACK, + ixEthAccNpeLoopbackMessageCallback, + IX_NPEMH_SEND_RETRIES_DEFAULT); + + if (npeMhStatus != IX_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + } + else + { + /* wait for NPE loopbackEnable response */ + if (ixOsalMutexLock(&ixEthAccMacState[portId]. npeLoopbackMessageLock, + IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS) + != IX_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + } + } + + return status; +} + +IxEthAccStatus +ixEthAccPortTxEnablePriv(IxEthAccPortId portId) +{ + UINT32 regval; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable TX.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* read register */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + /* update register */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval | IX_ETH_ACC_TX_CNTRL1_TX_EN); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortRxEnablePriv(IxEthAccPortId portId) +{ + UINT32 regval; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable RX.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* read register */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + /* update register */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval | IX_ETH_ACC_RX_CNTRL1_RX_EN); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortLoopbackDisable(IxEthAccPortId portId) +{ + UINT32 regval; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable loopback.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /*disable MAC loopabck */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + (regval & ~IX_ETH_ACC_RX_CNTRL1_LOOP_EN)); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId) +{ + IX_STATUS npeMhStatus; + IxNpeMhMessage message; + IxEthAccStatus status = IX_ETH_ACC_SUCCESS; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot enable NPE loopback.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* disable NPE loopback (lsb of the message contains the value 0) */ + message.data[0] = (IX_ETHNPE_SETLOOPBACK_MODE << IX_ETH_ACC_MAC_MSGID_SHL); + message.data[1] = 0; + + npeMhStatus = ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), + message, + IX_ETHNPE_SETLOOPBACK_MODE_ACK, + ixEthAccNpeLoopbackMessageCallback, + IX_NPEMH_SEND_RETRIES_DEFAULT); + + if (npeMhStatus != IX_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + } + else + { + /* wait for NPE loopbackEnable response */ + if (ixOsalMutexLock(&ixEthAccMacState[portId].npeLoopbackMessageLock, + IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS) + != IX_SUCCESS) + { + status = IX_ETH_ACC_FAIL; + } + } + + return status; +} + +IxEthAccStatus +ixEthAccPortTxDisablePriv(IxEthAccPortId portId) +{ + UINT32 regval; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable TX.\n", (INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* read register */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + /* update register */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + (regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN)); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortRxDisablePriv(IxEthAccPortId portId) +{ + UINT32 regval; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Eth %d: Cannot disable RX.\n", (INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* read register */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + /* update register */ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + (regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN)); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId) +{ + UINT32 regval; + + /* Turn off promiscuous mode */ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear promiscuous mode.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /*set bit 5 of Rx control 1 - enable address filtering*/ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN); + + ixEthAccMacState[portId].promiscuous = FALSE; + + ixEthAccMulticastAddressSet(portId); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId) +{ + UINT32 regval; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set promiscuous mode.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* + * Set bit 5 of Rx control 1 - We enable address filtering even in + * promiscuous mode because we want the MAC to set the appropriate + * bits in m_flags which doesn't happen if we turn off filtering. + */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval | IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN); + + ixEthAccMacState[portId].promiscuous = TRUE; + + ixEthAccMulticastAddressSet(portId); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortUnicastMacAddressSetPriv (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) +{ + UINT32 i; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + + if (macAddr == NULL) + { + return IX_ETH_ACC_FAIL; + } + + if ( macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ) + { + /* This is a multicast/broadcast address cant set it ! */ + return IX_ETH_ACC_FAIL; + } + + if ( macAddr->macAddress[0] == 0 && + macAddr->macAddress[1] == 0 && + macAddr->macAddress[2] == 0 && + macAddr->macAddress[3] == 0 && + macAddr->macAddress[4] == 0 && + macAddr->macAddress[5] == 0 ) + { + /* This is an invalid mac address cant set it ! */ + return IX_ETH_ACC_FAIL; + } + +#ifdef CONFIG_IXP425_COMPONENT_ETHDB + /* update the MAC address in the ethernet database */ + if (ixEthDBPortAddressSet(portId, (IxEthDBMacAddr *) macAddr) != IX_ETH_DB_SUCCESS) + { + return IX_ETH_ACC_FAIL; + } +#endif + + /*Set the Unicast MAC to the specified value*/ + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32), + macAddr->macAddress[i]); + } + ixEthAccMacState[portId].initDone = TRUE; + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortUnicastMacAddressGetPriv (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) +{ + /*Return the current value of the Unicast MAC from h/w + for the specified port*/ + UINT32 i; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Unicast Mac Address.\n",(INT32)portId,0,0,0,0,0); + /* Since Eth Npe is unavailable, return invalid MAC Address = 00:00:00:00:00:00 */ + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + macAddr->macAddress[i] = 0; + } + return IX_ETH_ACC_SUCCESS ; + } + + if(!ixEthAccMacState[portId].initDone) + { + return (IX_ETH_ACC_MAC_UNINITIALIZED); + } + + if (macAddr == NULL) + { + return IX_ETH_ACC_FAIL; + } + + + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_UNI_ADDR_1 + i*sizeof(UINT32), + macAddr->macAddress[i]); + } + return IX_ETH_ACC_SUCCESS; +} + +PRIVATE IxEthAccStatus +ixEthAccPortMulticastMacAddressGet (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) +{ + /*Return the current value of the Multicast MAC from h/w + for the specified port*/ + UINT32 i; + + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_ADDR_1 + i*sizeof(UINT32), + macAddr->macAddress[i]); + } + + return IX_ETH_ACC_SUCCESS; +} + +PRIVATE IxEthAccStatus +ixEthAccPortMulticastMacFilterGet (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) +{ + /*Return the current value of the Multicast MAC from h/w + for the specified port*/ + UINT32 i; + + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_ADDR_MASK_1 + i*sizeof(UINT32), + macAddr->macAddress[i]); + } + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortMulticastAddressJoinPriv (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) +{ + UINT32 i; + IxEthAccMacAddr broadcastAddr = {{0xff,0xff,0xff,0xff,0xff,0xff}}; + + /*Check that the port parameter is valid*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join Multicast Mac Address.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /*Check that the mac address is valid*/ + if(macAddr == NULL) + { + return IX_ETH_ACC_FAIL; + } + + /* Check that this is a multicast address */ + if (!(macAddr->macAddress[0] & IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT)) + { + return IX_ETH_ACC_FAIL; + } + + /* We don't add the Broadcast address */ + if(ixEthAccMacEqual(&broadcastAddr, macAddr)) + { + return IX_ETH_ACC_FAIL; + } + + for (i = 0; + i<ixEthAccMacState[portId].mcastAddrIndex; + i++) + { + /*Check if the current entry already match an existing matches*/ + if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i], macAddr)) + { + /* Address found in the list and already configured, + * return a success status + */ + return IX_ETH_ACC_SUCCESS; + } + } + + /* check for availability at the end of the current table */ + if(ixEthAccMacState[portId].mcastAddrIndex >= IX_ETH_ACC_MAX_MULTICAST_ADDRESSES) + { + return IX_ETH_ACC_FAIL; + } + + /*First add the address to the multicast table for the + specified port*/ + i=ixEthAccMacState[portId].mcastAddrIndex; + + memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i], + &macAddr->macAddress, + IX_IEEE803_MAC_ADDRESS_SIZE); + + /*Increment the index into the table, this must be done here + as MulticastAddressSet below needs to know about the latest + entry. + */ + ixEthAccMacState[portId].mcastAddrIndex++; + + /*Then calculate the new value to be written to the address and + address mask registers*/ + ixEthAccMulticastAddressSet(portId); + + return IX_ETH_ACC_SUCCESS; +} + + +IxEthAccStatus +ixEthAccPortMulticastAddressJoinAllPriv (IxEthAccPortId portId) +{ + IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}}; + + /*Check that the port parameter is valid*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot join all Multicast Address.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /* remove all entries from the database and + * insert a multicast entry + */ + memcpy(&ixEthAccMacState[portId].mcastAddrsTable[0], + &mcastMacAddr.macAddress, + IX_IEEE803_MAC_ADDRESS_SIZE); + + ixEthAccMacState[portId].mcastAddrIndex = 1; + ixEthAccMacState[portId].joinAll = TRUE; + + ixEthAccMulticastAddressSet(portId); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortMulticastAddressLeavePriv (IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) +{ + UINT32 i; + IxEthAccMacAddr mcastMacAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}}; + + /*Check that the port parameter is valid*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave Multicast Address.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /*Check that the mac address is valid*/ + if(macAddr == NULL) + { + return IX_ETH_ACC_FAIL; + } + /* Remove this mac address from the mask for the specified port + * we copy down all entries above the blanked entry, and + * decrement the index + */ + i=0; + + while(i<ixEthAccMacState[portId].mcastAddrIndex) + { + /*Check if the current entry matches*/ + if(ixEthAccMacEqual(&ixEthAccMacState[portId].mcastAddrsTable[i], + macAddr)) + { + if(ixEthAccMacEqual(macAddr, &mcastMacAddr)) + { + ixEthAccMacState[portId].joinAll = FALSE; + } + /*Decrement the index into the multicast address table + for the current port*/ + ixEthAccMacState[portId].mcastAddrIndex--; + + /*Copy down all entries above the current entry*/ + while(i<ixEthAccMacState[portId].mcastAddrIndex) + { + memcpy(&ixEthAccMacState[portId].mcastAddrsTable[i], + &ixEthAccMacState[portId].mcastAddrsTable[i+1], + IX_IEEE803_MAC_ADDRESS_SIZE); + i++; + } + /*recalculate the mask and write it to the MAC*/ + ixEthAccMulticastAddressSet(portId); + + return IX_ETH_ACC_SUCCESS; + } + /* search the next entry */ + i++; + } + /* no matching entry found */ + return IX_ETH_ACC_NO_SUCH_ADDR; +} + +IxEthAccStatus +ixEthAccPortMulticastAddressLeaveAllPriv (IxEthAccPortId portId) +{ + /*Check that the port parameter is valid*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot leave all Multicast Address.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + ixEthAccMacState[portId].mcastAddrIndex = 0; + ixEthAccMacState[portId].joinAll = FALSE; + + ixEthAccMulticastAddressSet(portId); + + return IX_ETH_ACC_SUCCESS; +} + + +IxEthAccStatus +ixEthAccPortUnicastAddressShowPriv (IxEthAccPortId portId) +{ + IxEthAccMacAddr macAddr; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Unicast Address.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + /*Get the MAC (UINICAST) address from hardware*/ + if(ixEthAccPortUnicastMacAddressGetPriv(portId, &macAddr) != IX_ETH_ACC_SUCCESS) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: MAC address uninitialised port %u\n", + (INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_MAC_UNINITIALIZED; + } + + /*print it out*/ + ixEthAccMacPrint(&macAddr); + printf("\n"); + return IX_ETH_ACC_SUCCESS; +} + + + +void +ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId) +{ + IxEthAccMacAddr macAddr; + UINT32 i; + + if(!IX_ETH_ACC_IS_PORT_VALID(portId)) + { + return; + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot show Multicast Address.\n",(INT32)portId,0,0,0,0,0); + return ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return; + } + + printf("Multicast MAC: "); + /*Get the MAC (MULTICAST) address from hardware*/ + ixEthAccPortMulticastMacAddressGet(portId, &macAddr); + /*print it out*/ + ixEthAccMacPrint(&macAddr); + /*Get the MAC (MULTICAST) filter from hardware*/ + ixEthAccPortMulticastMacFilterGet(portId, &macAddr); + /*print it out*/ + printf(" ( "); + ixEthAccMacPrint(&macAddr); + printf(" )\n"); + printf("Constituent Addresses:\n"); + for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++) + { + ixEthAccMacPrint(&ixEthAccMacState[portId].mcastAddrsTable[i]); + printf("\n"); + } + return; +} + +/*Set the duplex mode*/ +IxEthAccStatus +ixEthAccPortDuplexModeSetPriv (IxEthAccPortId portId, + IxEthAccDuplexMode mode) +{ + UINT32 txregval; + UINT32 rxregval; + + /*This is bit 1 of the transmit control reg, set to 1 for half + duplex, 0 for full duplex*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot set Duplex Mode.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + txregval); + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + rxregval); + + if (mode == IX_ETH_ACC_FULL_DUPLEX) + { + /*Clear half duplex bit in TX*/ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + txregval & ~IX_ETH_ACC_TX_CNTRL1_DUPLEX); + + /*We must set the pause enable in the receive logic when in + full duplex mode*/ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + rxregval | IX_ETH_ACC_RX_CNTRL1_PAUSE_EN); + ixEthAccMacState[portId].fullDuplex = TRUE; + + } + else if (mode == IX_ETH_ACC_HALF_DUPLEX) + { + /*Set half duplex bit in TX*/ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + txregval | IX_ETH_ACC_TX_CNTRL1_DUPLEX); + + /*We must clear pause enable in the receive logic when in + half duplex mode*/ + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + rxregval & ~IX_ETH_ACC_RX_CNTRL1_PAUSE_EN); + + ixEthAccMacState[portId].fullDuplex = FALSE; + } + else + { + return IX_ETH_ACC_FAIL; + } + + + return IX_ETH_ACC_SUCCESS; + +} + + + +IxEthAccStatus +ixEthAccPortDuplexModeGetPriv (IxEthAccPortId portId, + IxEthAccDuplexMode *mode) +{ + /*Return the duplex mode for the specified port*/ + UINT32 regval; + + /*This is bit 1 of the transmit control reg, set to 1 for half + duplex, 0 for full duplex*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get Duplex Mode.\n",(INT32)portId,0,0,0,0,0); + /* return hald duplex */ + *mode = IX_ETH_ACC_HALF_DUPLEX ; + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + if (mode == NULL) + { + return (IX_ETH_ACC_FAIL); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + if( regval & IX_ETH_ACC_TX_CNTRL1_DUPLEX) + { + *mode = IX_ETH_ACC_HALF_DUPLEX; + } + else + { + *mode = IX_ETH_ACC_FULL_DUPLEX; + } + + return IX_ETH_ACC_SUCCESS; +} + + + +IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingEnablePriv (IxEthAccPortId portId) +{ + UINT32 regval; + /*Enable FCS computation by the MAC and appending to the + frame*/ + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval | + IX_ETH_ACC_TX_CNTRL1_PAD_EN); + + ixEthAccMacState[portId].txPADAppend = TRUE; + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingDisablePriv (IxEthAccPortId portId) +{ + UINT32 regval; + + /*disable FCS computation and appending*/ + /*Set bit 4 of Tx control register one to zero*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disble Tx Frame Append Padding.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval & ~IX_ETH_ACC_TX_CNTRL1_PAD_EN); + + ixEthAccMacState[portId].txPADAppend = FALSE; + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortTxFrameAppendFCSEnablePriv (IxEthAccPortId portId) +{ + UINT32 regval; + + /*Enable FCS computation by the MAC and appending to the + frame*/ + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval | IX_ETH_ACC_TX_CNTRL1_FCS_EN); + + ixEthAccMacState[portId].txFCSAppend = TRUE; + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortTxFrameAppendFCSDisablePriv (IxEthAccPortId portId) +{ + UINT32 regval; + + /*disable FCS computation and appending*/ + /*Set bit 4 of Tx control register one to zero*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Tx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval & ~IX_ETH_ACC_TX_CNTRL1_FCS_EN); + + ixEthAccMacState[portId].txFCSAppend = FALSE; + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortRxFrameAppendFCSEnablePriv (IxEthAccPortId portId) +{ + /*Set bit 2 of Rx control 1*/ + UINT32 regval; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot enable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval | IX_ETH_ACC_RX_CNTRL1_CRC_EN); + + ixEthAccMacState[portId].rxFCSAppend = TRUE; + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccPortRxFrameAppendFCSDisablePriv (IxEthAccPortId portId) +{ + UINT32 regval; + + /*Clear bit 2 of Rx control 1*/ + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot disable Rx Frame Append FCS.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval & ~IX_ETH_ACC_RX_CNTRL1_CRC_EN); + + ixEthAccMacState[portId].rxFCSAppend = FALSE; + return IX_ETH_ACC_SUCCESS; +} + + + +PRIVATE void +ixEthAccMacNpeStatsMessageCallback (IxNpeMhNpeId npeId, + IxNpeMhMessage msg) +{ + IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); + +#ifndef NDEBUG + /* Prudent to at least check the port is within range */ + if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) + { + IX_ETH_ACC_FATAL_LOG( + "IXETHACC:ixEthAccMacNpeStatsMessageCallback: Illegal port: %u\n", + (UINT32)portId, 0, 0, 0, 0, 0); + return; + } +#endif + + /*Unblock Stats Get call*/ + ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsLock); + +} + +PRIVATE void +ixEthAccMibIIStatsEndianConvert (IxEthEthObjStats *retStats) +{ + /* endianness conversion */ + + /* Rx stats */ + retStats->dot3StatsAlignmentErrors = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsAlignmentErrors); + retStats->dot3StatsFCSErrors = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsFCSErrors); + retStats->dot3StatsInternalMacReceiveErrors = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacReceiveErrors); + retStats->RxOverrunDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxOverrunDiscards); + retStats->RxLearnedEntryDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLearnedEntryDiscards); + retStats->RxLargeFramesDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxLargeFramesDiscards); + retStats->RxSTPBlockedDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxSTPBlockedDiscards); + retStats->RxVLANTypeFilterDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANTypeFilterDiscards); + retStats->RxVLANIdFilterDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxVLANIdFilterDiscards); + retStats->RxInvalidSourceDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxInvalidSourceDiscards); + retStats->RxBlackListDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxBlackListDiscards); + retStats->RxWhiteListDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxWhiteListDiscards); + retStats->RxUnderflowEntryDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->RxUnderflowEntryDiscards); + + /* Tx stats */ + retStats->dot3StatsSingleCollisionFrames = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsSingleCollisionFrames); + retStats->dot3StatsMultipleCollisionFrames = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsMultipleCollisionFrames); + retStats->dot3StatsDeferredTransmissions = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsDeferredTransmissions); + retStats->dot3StatsLateCollisions = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsLateCollisions); + retStats->dot3StatsExcessiveCollsions = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsExcessiveCollsions); + retStats->dot3StatsInternalMacTransmitErrors = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsInternalMacTransmitErrors); + retStats->dot3StatsCarrierSenseErrors = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->dot3StatsCarrierSenseErrors); + retStats->TxLargeFrameDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxLargeFrameDiscards); + retStats->TxVLANIdFilterDiscards = + IX_OSAL_SWAP_BE_SHARED_LONG(retStats->TxVLANIdFilterDiscards); +} + +IxEthAccStatus +ixEthAccMibIIStatsGet (IxEthAccPortId portId, + IxEthEthObjStats *retStats ) +{ + IxNpeMhMessage message; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + printf("EthAcc: ixEthAccMibIIStatsGet (Mac) EthAcc service is not initialized\n"); + return (IX_ETH_ACC_FAIL); + } + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (retStats == NULL) + { + printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NULL argument\n"); + return (IX_ETH_ACC_FAIL); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + printf("EthAcc: ixEthAccMibIIStatsGet (Mac) NPE for port %d is not available\n", portId); + + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get MIB II Stats.\n",(INT32)portId,0,0,0,0,0); + + /* Return all zero stats */ + IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats)); + + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + printf("EthAcc: ixEthAccMibIIStatsGet (Mac) port %d is not initialized\n", portId); + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats)); + + message.data[0] = IX_ETHNPE_GETSTATS << IX_ETH_ACC_MAC_MSGID_SHL; + message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats); + + /* Permit only one task to request MIB statistics Get operation + at a time */ + ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetAccessLock, IX_OSAL_WAIT_FOREVER); + + if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), + message, + IX_ETHNPE_GETSTATS, + ixEthAccMacNpeStatsMessageCallback, + IX_NPEMH_SEND_RETRIES_DEFAULT) + != IX_SUCCESS) + { + ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock); + + printf("EthAcc: (Mac) StatsGet failed to send NPE message\n"); + + return IX_ETH_ACC_FAIL; + } + + /* Wait for callback invocation indicating response to + this request - we need this mutex in order to ensure + that the return from this function is synchronous */ + ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS); + + /* Permit other tasks to perform MIB statistics Get operation */ + ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetAccessLock); + + ixEthAccMibIIStatsEndianConvert (retStats); + + return IX_ETH_ACC_SUCCESS; +} + + +PRIVATE void +ixEthAccMacNpeStatsResetMessageCallback (IxNpeMhNpeId npeId, + IxNpeMhMessage msg) +{ + IxEthAccPortId portId = IX_ETH_ACC_NPE_TO_PORT_ID(npeId); + +#ifndef NDEBUG + /* Prudent to at least check the port is within range */ + if (portId >= IX_ETH_ACC_NUMBER_OF_PORTS) + { + IX_ETH_ACC_FATAL_LOG( + "IXETHACC:ixEthAccMacNpeStatsResetMessageCallback: Illegal port: %u\n", + (UINT32)portId, 0, 0, 0, 0, 0); + return; + } +#endif + + /*Unblock Stats Get & reset call*/ + ixOsalMutexUnlock(&ixEthAccMacState[portId].ackMIBStatsResetLock); + +} + + + +IxEthAccStatus +ixEthAccMibIIStatsGetClear (IxEthAccPortId portId, + IxEthEthObjStats *retStats) +{ + IxNpeMhMessage message; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) EthAcc service is not initialized\n"); + return (IX_ETH_ACC_FAIL); + } + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (retStats == NULL) + { + printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NULL argument\n"); + return (IX_ETH_ACC_FAIL); + } + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) NPE for port %d is not available\n", portId); + + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot get and clear MIB II Stats.\n", (INT32)portId, 0, 0, 0, 0, 0); + + /* Return all zero stats */ + IX_ETH_ACC_MEMSET(retStats, 0, sizeof(IxEthEthObjStats)); + + return IX_ETH_ACC_SUCCESS ; + } + + if (!IX_ETH_IS_PORT_INITIALIZED(portId)) + { + printf("EthAcc: ixEthAccMibIIStatsGetClear (Mac) port %d is not initialized\n", portId); + return (IX_ETH_ACC_PORT_UNINITIALIZED); + } + + IX_OSAL_CACHE_INVALIDATE(retStats, sizeof(IxEthEthObjStats)); + + message.data[0] = IX_ETHNPE_RESETSTATS << IX_ETH_ACC_MAC_MSGID_SHL; + message.data[1] = (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS(retStats); + + /* Permit only one task to request MIB statistics Get-Reset operation at a time */ + ixOsalMutexLock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock, IX_OSAL_WAIT_FOREVER); + + if(ixNpeMhMessageWithResponseSend(IX_ETH_ACC_PORT_TO_NPE_ID(portId), + message, + IX_ETHNPE_RESETSTATS, + ixEthAccMacNpeStatsResetMessageCallback, + IX_NPEMH_SEND_RETRIES_DEFAULT) + != IX_SUCCESS) + { + ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock); + + printf("EthAcc: (Mac) ixEthAccMibIIStatsGetClear failed to send NPE message\n"); + + return IX_ETH_ACC_FAIL; + } + + /* Wait for callback invocation indicating response to this request */ + ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_ETH_ACC_MIB_STATS_DELAY_MSECS); + + /* permit other tasks to get and reset MIB stats*/ + ixOsalMutexUnlock(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock); + + ixEthAccMibIIStatsEndianConvert(retStats); + + return IX_ETH_ACC_SUCCESS; +} + +IxEthAccStatus +ixEthAccMibIIStatsClear (IxEthAccPortId portId) +{ + static IxEthEthObjStats retStats; + IxEthAccStatus status; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot clear MIB II Stats.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + /* there is no reset operation without a corresponding Get */ + status = ixEthAccMibIIStatsGetClear(portId, &retStats); + + return status; +} + +/* Initialize the ethernet MAC settings */ +IxEthAccStatus +ixEthAccMacInit(IxEthAccPortId portId) +{ + IX_OSAL_MBUF_POOL* portDisablePool; + UINT8 *data; + + IX_ETH_ACC_VALIDATE_PORT_ID(portId); + + if (IX_ETH_ACC_SUCCESS != ixEthAccSingleEthNpeCheck(portId)) + { + IX_ETH_ACC_WARNING_LOG("EthAcc: Unavailable Eth %d: Cannot initialize Mac.\n",(INT32)portId,0,0,0,0,0); + return IX_ETH_ACC_SUCCESS ; + } + + if(ixEthAccMacState[portId].macInitialised == FALSE) + { + ixEthAccMacState[portId].fullDuplex = TRUE; + ixEthAccMacState[portId].rxFCSAppend = TRUE; + ixEthAccMacState[portId].txFCSAppend = TRUE; + ixEthAccMacState[portId].txPADAppend = TRUE; + ixEthAccMacState[portId].enabled = FALSE; + ixEthAccMacState[portId].promiscuous = TRUE; + ixEthAccMacState[portId].joinAll = FALSE; + ixEthAccMacState[portId].initDone = FALSE; + ixEthAccMacState[portId].macInitialised = TRUE; + + /* initialize MIB stats mutexes */ + ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsLock); + ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsLock, IX_OSAL_WAIT_FOREVER); + + ixOsalMutexInit(&ixEthAccMacState[portId].ackMIBStatsResetLock); + ixOsalMutexLock(&ixEthAccMacState[portId].ackMIBStatsResetLock, IX_OSAL_WAIT_FOREVER); + + ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetAccessLock); + + ixOsalMutexInit(&ixEthAccMacState[portId].MIBStatsGetResetAccessLock); + + ixOsalMutexInit(&ixEthAccMacState[portId].npeLoopbackMessageLock); + + ixEthAccMacState[portId].portDisableRxMbufPtr = NULL; + ixEthAccMacState[portId].portDisableTxMbufPtr = NULL; + + portDisablePool = IX_OSAL_MBUF_POOL_INIT(2, + IX_ETHACC_RX_MBUF_MIN_SIZE, + "portDisable Pool"); + + IX_OSAL_ENSURE(portDisablePool != NULL, "Failed to initialize PortDisable pool"); + + ixEthAccMacState[portId].portDisableRxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool); + ixEthAccMacState[portId].portDisableTxMbufPtr = IX_OSAL_MBUF_POOL_GET(portDisablePool); + + IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableRxMbufPtr != NULL, + "Pool allocation failed"); + IX_OSAL_ENSURE(ixEthAccMacState[portId].portDisableTxMbufPtr != NULL, + "Pool allocation failed"); + /* fill the payload of the Rx mbuf used in portDisable */ + IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableRxMbufPtr) = IX_ETHACC_RX_MBUF_MIN_SIZE; + + memset(IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableRxMbufPtr), + 0xAA, + IX_ETHACC_RX_MBUF_MIN_SIZE); + + /* fill the payload of the Tx mbuf used in portDisable (64 bytes) */ + IX_OSAL_MBUF_MLEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64; + IX_OSAL_MBUF_PKT_LEN(ixEthAccMacState[portId].portDisableTxMbufPtr) = 64; + + data = (UINT8 *) IX_OSAL_MBUF_MDATA(ixEthAccMacState[portId].portDisableTxMbufPtr); + memset(data, 0xBB, 64); + data[0] = 0x00; /* unicast destination MAC address */ + data[6] = 0x00; /* unicast source MAC address */ + data[12] = 0x08; /* typelength : IP frame */ + data[13] = 0x00; /* typelength : IP frame */ + + IX_OSAL_CACHE_FLUSH(data, 64); + } + + IX_OSAL_ASSERT (ixEthAccMacBase[portId] != 0); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_CORE_CNTRL, + IX_ETH_ACC_CORE_RESET); + + ixOsalSleep(IX_ETH_ACC_MAC_RESET_DELAY); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_CORE_CNTRL, + IX_ETH_ACC_CORE_MDC_EN); + + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_INT_CLK_THRESH, + IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT); + + ixEthAccMacStateUpdate(portId); + + return IX_ETH_ACC_SUCCESS; +} + +/* PRIVATE Functions*/ + +PRIVATE void +ixEthAccMacStateUpdate(IxEthAccPortId portId) +{ + UINT32 regval; + + if ( ixEthAccMacState[portId].enabled == FALSE ) + { + /* Just disable both the transmitter and reciver in the MAC. */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval & ~IX_ETH_ACC_RX_CNTRL1_RX_EN); + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval & ~IX_ETH_ACC_TX_CNTRL1_TX_EN); + } + + if(ixEthAccMacState[portId].fullDuplex) + { + ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_FULL_DUPLEX); + } + else + { + ixEthAccPortDuplexModeSetPriv (portId, IX_ETH_ACC_HALF_DUPLEX); + } + + if(ixEthAccMacState[portId].rxFCSAppend) + { + ixEthAccPortRxFrameAppendFCSEnablePriv (portId); + } + else + { + ixEthAccPortRxFrameAppendFCSDisablePriv (portId); + } + + if(ixEthAccMacState[portId].txFCSAppend) + { + ixEthAccPortTxFrameAppendFCSEnablePriv (portId); + } + else + { + ixEthAccPortTxFrameAppendFCSDisablePriv (portId); + } + + if(ixEthAccMacState[portId].txPADAppend) + { + ixEthAccPortTxFrameAppendPaddingEnablePriv (portId); + } + else + { + ixEthAccPortTxFrameAppendPaddingDisablePriv (portId); + } + + if(ixEthAccMacState[portId].promiscuous) + { + ixEthAccPortPromiscuousModeSetPriv(portId); + } + else + { + ixEthAccPortPromiscuousModeClearPriv(portId); + } + + if ( ixEthAccMacState[portId].enabled == TRUE ) + { + /* Enable both the transmitter and reciver in the MAC. */ + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval); + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_RX_CNTRL1, + regval | IX_ETH_ACC_RX_CNTRL1_RX_EN); + + REG_READ(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval); + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_TX_CNTRL1, + regval | IX_ETH_ACC_TX_CNTRL1_TX_EN); + } +} + + +PRIVATE BOOL +ixEthAccMacEqual(IxEthAccMacAddr *macAddr1, + IxEthAccMacAddr *macAddr2) +{ + UINT32 i; + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE; i++) + { + if(macAddr1->macAddress[i] != macAddr2->macAddress[i]) + { + return FALSE; + } + } + return TRUE; +} + +PRIVATE void +ixEthAccMacPrint(IxEthAccMacAddr *m) +{ + printf("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x", + m->macAddress[0], m->macAddress[1], + m->macAddress[2], m->macAddress[3], + m->macAddress[4], m->macAddress[5]); +} + +/* Set the multicast address and address mask registers + * + * A bit in the address mask register must be set if + * all multicast addresses always have that bit set, or if + * all multicast addresses always have that bit cleared. + * + * A bit in the address register must be set if all multicast + * addresses have that bit set, otherwise, it should be cleared + */ + +PRIVATE void +ixEthAccMulticastAddressSet(IxEthAccPortId portId) +{ + UINT32 i; + UINT32 j; + IxEthAccMacAddr addressMask; + IxEthAccMacAddr address; + IxEthAccMacAddr alwaysClearBits; + IxEthAccMacAddr alwaysSetBits; + + /* calculate alwaysClearBits and alwaysSetBits: + * alwaysClearBits is calculated by ORing all + * multicast addresses, those bits that are always + * clear are clear in the result + * + * alwaysSetBits is calculated by ANDing all + * multicast addresses, those bits that are always set + * are set in the result + */ + + if (ixEthAccMacState[portId].promiscuous == TRUE) + { + /* Promiscuous Mode is set, and filtering + * allow all packets, and enable the mcast and + * bcast detection. + */ + memset(&addressMask.macAddress, + 0, + IX_IEEE803_MAC_ADDRESS_SIZE); + memset(&address.macAddress, + 0, + IX_IEEE803_MAC_ADDRESS_SIZE); + } + else + { + if(ixEthAccMacState[portId].joinAll == TRUE) + { + /* Join all is set. The mask and address are + * the multicast settings. + */ + IxEthAccMacAddr macAddr = {{0x1,0x0,0x0,0x0,0x0,0x0}}; + + memcpy(addressMask.macAddress, + macAddr.macAddress, + IX_IEEE803_MAC_ADDRESS_SIZE); + memcpy(address.macAddress, + macAddr.macAddress, + IX_IEEE803_MAC_ADDRESS_SIZE); + } + else if(ixEthAccMacState[portId].mcastAddrIndex == 0) + { + /* No entry in the filtering database, + * Promiscuous Mode is cleared, Broadcast filtering + * is configured. + */ + memset(addressMask.macAddress, + IX_ETH_ACC_MAC_ALL_BITS_SET, + IX_IEEE803_MAC_ADDRESS_SIZE); + memset(address.macAddress, + IX_ETH_ACC_MAC_ALL_BITS_SET, + IX_IEEE803_MAC_ADDRESS_SIZE); + } + else + { + /* build a mask and an address which mix all entreis + * from the list of multicast addresses + */ + memset(alwaysClearBits.macAddress, + 0, + IX_IEEE803_MAC_ADDRESS_SIZE); + memset(alwaysSetBits.macAddress, + IX_ETH_ACC_MAC_ALL_BITS_SET, + IX_IEEE803_MAC_ADDRESS_SIZE); + + for(i=0;i<ixEthAccMacState[portId].mcastAddrIndex;i++) + { + for(j=0;j<IX_IEEE803_MAC_ADDRESS_SIZE;j++) + { + alwaysClearBits.macAddress[j] |= + ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j]; + alwaysSetBits.macAddress[j] &= + ixEthAccMacState[portId].mcastAddrsTable[i].macAddress[j]; + } + } + + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + addressMask.macAddress[i] = alwaysSetBits.macAddress[i] + | ~alwaysClearBits.macAddress[i]; + address.macAddress[i] = alwaysSetBits.macAddress[i]; + } + } + } + + /*write the new addr filtering to h/w*/ + for(i=0;i<IX_IEEE803_MAC_ADDRESS_SIZE;i++) + { + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_ADDR_MASK_1+i*sizeof(UINT32), + addressMask.macAddress[i]); + REG_WRITE(ixEthAccMacBase[portId], + IX_ETH_ACC_MAC_ADDR_1+i*sizeof(UINT32), + address.macAddress[i]); + } +} diff --git a/drivers/net/npe/IxEthAccMii.c b/drivers/net/npe/IxEthAccMii.c new file mode 100644 index 0000000000..d282aa6725 --- /dev/null +++ b/drivers/net/npe/IxEthAccMii.c @@ -0,0 +1,410 @@ +/** + * @file IxEthAccMii.c + * + * @author Intel Corporation + * @date + * + * @brief MII control functions + * + * Design Notes: + * + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" +#include "IxEthAcc.h" +#include "IxEthAcc_p.h" +#include "IxEthAccMac_p.h" +#include "IxEthAccMii_p.h" + + +PRIVATE UINT32 miiBaseAddressVirt; +PRIVATE IxOsalMutex miiAccessLock; + +PUBLIC UINT32 ixEthAccMiiRetryCount = IX_ETH_ACC_MII_TIMEOUT_10TH_SECS; +PUBLIC UINT32 ixEthAccMiiAccessTimeout = IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS; + +/* ----------------------------------- + * private function prototypes + */ +PRIVATE void +ixEthAccMdioCmdWrite(UINT32 mdioCommand); + +PRIVATE void +ixEthAccMdioCmdRead(UINT32 *data); + +PRIVATE void +ixEthAccMdioStatusRead(UINT32 *data); + + +PRIVATE void +ixEthAccMdioCmdWrite(UINT32 mdioCommand) +{ + REG_WRITE(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_1, + mdioCommand & 0xff); + + REG_WRITE(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_2, + (mdioCommand >> 8) & 0xff); + + REG_WRITE(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_3, + (mdioCommand >> 16) & 0xff); + + REG_WRITE(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_4, + (mdioCommand >> 24) & 0xff); +} + +PRIVATE void +ixEthAccMdioCmdRead(UINT32 *data) +{ + UINT32 regval; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_1, + regval); + + *data = regval & 0xff; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_2, + regval); + + *data |= (regval & 0xff) << 8; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_3, + regval); + + *data |= (regval & 0xff) << 16; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_CMD_4, + regval); + + *data |= (regval & 0xff) << 24; + +} + +PRIVATE void +ixEthAccMdioStatusRead(UINT32 *data) +{ + UINT32 regval; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_STS_1, + regval); + + *data = regval & 0xff; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_STS_2, + regval); + + *data |= (regval & 0xff) << 8; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_STS_3, + regval); + + *data |= (regval & 0xff) << 16; + + REG_READ(miiBaseAddressVirt, + IX_ETH_ACC_MAC_MDIO_STS_4, + regval); + + *data |= (regval & 0xff) << 24; + +} + + +/******************************************************************** + * ixEthAccMiiInit + */ +IxEthAccStatus +ixEthAccMiiInit() +{ + if(ixOsalMutexInit(&miiAccessLock)!= IX_SUCCESS) + { + return IX_ETH_ACC_FAIL; + } + + miiBaseAddressVirt = (UINT32) IX_OSAL_MEM_MAP(IX_ETH_ACC_MAC_0_BASE, IX_OSAL_IXP400_ETHA_MAP_SIZE); + + if (miiBaseAddressVirt == 0) + { + ixOsalLog(IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDOUT, + "EthAcc: Could not map MII I/O mapped memory\n", + 0, 0, 0, 0, 0, 0); + + return IX_ETH_ACC_FAIL; + } + + return IX_ETH_ACC_SUCCESS; +} + +void +ixEthAccMiiUnload(void) +{ + IX_OSAL_MEM_UNMAP(miiBaseAddressVirt); + + miiBaseAddressVirt = 0; +} + +PUBLIC IxEthAccStatus +ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount) +{ + if (retryCount < 1) return IX_ETH_ACC_FAIL; + + ixEthAccMiiRetryCount = retryCount; + ixEthAccMiiAccessTimeout = timeout; + + return IX_ETH_ACC_SUCCESS; +} + +/********************************************************************* + * ixEthAccMiiReadRtn - read a 16 bit value from a PHY + */ +IxEthAccStatus +ixEthAccMiiReadRtn (UINT8 phyAddr, + UINT8 phyReg, + UINT16 *value) +{ + UINT32 mdioCommand; + UINT32 regval; + UINT32 miiTimeout; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + if ((phyAddr >= IXP425_ETH_ACC_MII_MAX_ADDR) + || (phyReg >= IXP425_ETH_ACC_MII_MAX_REG)) + { + return (IX_ETH_ACC_FAIL); + } + + if (value == NULL) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); + mdioCommand = phyReg << IX_ETH_ACC_MII_REG_SHL + | phyAddr << IX_ETH_ACC_MII_ADDR_SHL; + mdioCommand |= IX_ETH_ACC_MII_GO; + + ixEthAccMdioCmdWrite(mdioCommand); + + miiTimeout = ixEthAccMiiRetryCount; + + while(miiTimeout) + { + + ixEthAccMdioCmdRead(®val); + + if((regval & IX_ETH_ACC_MII_GO) == 0x0) + { + break; + } + /* Sleep for a while */ + ixOsalSleep(ixEthAccMiiAccessTimeout); + miiTimeout--; + } + + + + if(miiTimeout == 0) + { + ixOsalMutexUnlock(&miiAccessLock); + *value = 0xffff; + return IX_ETH_ACC_FAIL; + } + + + ixEthAccMdioStatusRead(®val); + if(regval & IX_ETH_ACC_MII_READ_FAIL) + { + ixOsalMutexUnlock(&miiAccessLock); + *value = 0xffff; + return IX_ETH_ACC_FAIL; + } + + *value = regval & 0xffff; + ixOsalMutexUnlock(&miiAccessLock); + return IX_ETH_ACC_SUCCESS; + +} + + +/********************************************************************* + * ixEthAccMiiWriteRtn - write a 16 bit value to a PHY + */ +IxEthAccStatus +ixEthAccMiiWriteRtn (UINT8 phyAddr, + UINT8 phyReg, + UINT16 value) +{ + UINT32 mdioCommand; + UINT32 regval; + UINT16 readVal; + UINT32 miiTimeout; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + if ((phyAddr >= IXP425_ETH_ACC_MII_MAX_ADDR) + || (phyReg >= IXP425_ETH_ACC_MII_MAX_REG)) + { + return (IX_ETH_ACC_FAIL); + } + + /* ensure that a PHY is present at this address */ + if(ixEthAccMiiReadRtn(phyAddr, + IX_ETH_ACC_MII_CTRL_REG, + &readVal) != IX_ETH_ACC_SUCCESS) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); + mdioCommand = phyReg << IX_ETH_ACC_MII_REG_SHL + | phyAddr << IX_ETH_ACC_MII_ADDR_SHL ; + mdioCommand |= IX_ETH_ACC_MII_GO | IX_ETH_ACC_MII_WRITE | value; + + ixEthAccMdioCmdWrite(mdioCommand); + + miiTimeout = ixEthAccMiiRetryCount; + + while(miiTimeout) + { + + ixEthAccMdioCmdRead(®val); + + /*The "GO" bit is reset to 0 when the write completes*/ + if((regval & IX_ETH_ACC_MII_GO) == 0x0) + { + break; + } + /* Sleep for a while */ + ixOsalSleep(ixEthAccMiiAccessTimeout); + miiTimeout--; + } + + ixOsalMutexUnlock(&miiAccessLock); + if(miiTimeout == 0) + { + return IX_ETH_ACC_FAIL; + } + return IX_ETH_ACC_SUCCESS; +} + + +/***************************************************************** + * + * Phy query functions + * + */ +IxEthAccStatus +ixEthAccMiiStatsShow (UINT32 phyAddr) +{ + UINT16 regval; + printf("Regisers on PHY at address 0x%x\n", phyAddr); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_CTRL_REG, ®val); + printf(" Control Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_STAT_REG, ®val); + printf(" Status Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_PHY_ID1_REG, ®val); + printf(" PHY ID1 Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_PHY_ID2_REG, ®val); + printf(" PHY ID2 Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_ADS_REG, ®val); + printf(" Auto Neg ADS Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_PRTN_REG, ®val); + printf(" Auto Neg Partner Ability Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_EXP_REG, ®val); + printf(" Auto Neg Expansion Register : 0x%4.4x\n", regval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_ACC_MII_AN_NEXT_REG, ®val); + printf(" Auto Neg Next Register : 0x%4.4x\n", regval); + + return IX_ETH_ACC_SUCCESS; +} + + +/***************************************************************** + * + * Interface query functions + * + */ +IxEthAccStatus +ixEthAccMdioShow (void) +{ + UINT32 regval; + + if (!IX_ETH_ACC_IS_SERVICE_INITIALIZED()) + { + return (IX_ETH_ACC_FAIL); + } + + ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); + ixEthAccMdioCmdRead(®val); + ixOsalMutexUnlock(&miiAccessLock); + + printf("MDIO command register\n"); + printf(" Go bit : 0x%x\n", (regval & BIT(31)) >> 31); + printf(" MDIO Write : 0x%x\n", (regval & BIT(26)) >> 26); + printf(" PHY address : 0x%x\n", (regval >> 21) & 0x1f); + printf(" Reg address : 0x%x\n", (regval >> 16) & 0x1f); + + ixOsalMutexLock(&miiAccessLock, IX_OSAL_WAIT_FOREVER); + ixEthAccMdioStatusRead(®val); + ixOsalMutexUnlock(&miiAccessLock); + + printf("MDIO status register\n"); + printf(" Read OK : 0x%x\n", (regval & BIT(31)) >> 31); + printf(" Read Data : 0x%x\n", (regval >> 16) & 0xff); + + return IX_ETH_ACC_SUCCESS; +} + diff --git a/drivers/net/npe/IxEthDBAPI.c b/drivers/net/npe/IxEthDBAPI.c new file mode 100644 index 0000000000..b2bfb72606 --- /dev/null +++ b/drivers/net/npe/IxEthDBAPI.c @@ -0,0 +1,448 @@ +/** + * @file IxEthDBAPI.c + * + * @brief Implementation of the public API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" +#include "IxFeatureCtrl.h" + +extern HashTable dbHashtable; +extern IxEthDBPortMap overflowUpdatePortList; +extern BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); + + return ixEthDBTriggerAddPortUpdate(macAddr, portID, TRUE); +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); + + return ixEthDBTriggerAddPortUpdate(macAddr, portID, FALSE); +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr) +{ + HashNode *searchResult; + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); + + if (searchResult == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ + } + + ixEthDBReleaseHashNode(searchResult); + + /* build a remove event and place it on the event queue */ + return ixEthDBTriggerRemovePortUpdate(macAddr, ((MacDescriptor *) searchResult->data)->portID); +} + +IX_ETH_DB_PUBLIC +void ixEthDBDatabaseMaintenance() +{ + HashIterator iterator; + UINT32 portIndex; + BOOL agingRequired = FALSE; + + /* ports who will have deleted records and therefore will need updating */ + IxEthDBPortMap triggerPorts; + + if (IX_FEATURE_CTRL_SWCONFIG_ENABLED != + ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING)) + { + return; + } + + SET_EMPTY_DEPENDENCY_MAP(triggerPorts); + + /* check if there's at least a port that needs aging */ + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + if (ixEthDBPortInfo[portIndex].agingEnabled && ixEthDBPortInfo[portIndex].enabled) + { + agingRequired = TRUE; + } + } + + if (agingRequired) + { + /* ask each NPE port to write back the database for aging inspection */ + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE + && ixEthDBPortInfo[portIndex].agingEnabled + && ixEthDBPortInfo[portIndex].enabled) + { + IxNpeMhMessage message; + IX_STATUS result; + + /* send EDB_GetMACAddressDatabase message */ + FILL_GETMACADDRESSDATABASE(message, + 0 /* unused */, + IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone)); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), message, result); + + if (result == IX_SUCCESS) + { + /* analyze NPE copy */ + ixEthDBNPESyncScan(portIndex, ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone, FULL_ELT_BYTE_SIZE); + + IX_ETH_DB_SUPPORT_TRACE("DB: (API) Finished scanning NPE tree on port %d\n", portIndex); + } + else + { + ixEthDBPortInfo[portIndex].agingEnabled = FALSE; + ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = FALSE; + ixEthDBPortInfo[portIndex].updateMethod.userControlled = TRUE; + + ixOsalLog(IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDOUT, + "EthDB: (Maintenance) warning, disabling aging and updates for port %d (assumed dead)\n", + portIndex, 0, 0, 0, 0, 0); + + ixEthDBDatabaseClear(portIndex, IX_ETH_DB_ALL_RECORD_TYPES); + } + } + } + + /* browse database and age entries */ + BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); + + while (IS_ITERATOR_VALID(&iterator)) + { + MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; + UINT32 *age = NULL; + BOOL staticEntry = TRUE; + + if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + age = &descriptor->recordData.filteringData.age; + staticEntry = descriptor->recordData.filteringData.staticEntry; + } + else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) + { + age = &descriptor->recordData.filteringVlanData.age; + staticEntry = descriptor->recordData.filteringVlanData.staticEntry; + } + else + { + staticEntry = TRUE; + } + + if (ixEthDBPortInfo[descriptor->portID].agingEnabled && (staticEntry == FALSE)) + { + /* manually increment the age if the port has no such capability */ + if ((ixEthDBPortDefinitions[descriptor->portID].capabilities & IX_ETH_ENTRY_AGING) == 0) + { + *age += (IX_ETH_DB_MAINTENANCE_TIME / 60); + } + + /* age entry if it exceeded the maximum time to live */ + if (*age >= (IX_ETH_DB_LEARNING_ENTRY_AGE_TIME / 60)) + { + /* add port to the set of update trigger ports */ + JOIN_PORT_TO_MAP(triggerPorts, descriptor->portID); + + /* delete entry */ + BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator)); + } + else + { + /* move to the next record */ + BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); + } + } + else + { + /* move to the next record */ + BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); + } + } + + /* update ports which lost records */ + ixEthDBUpdatePortLearningTrees(triggerPorts); + } +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType) +{ + IxEthDBPortMap triggerPorts; + HashIterator iterator; + + if (portID >= IX_ETH_DB_NUMBER_OF_PORTS && portID != IX_ETH_DB_ALL_PORTS) + { + return IX_ETH_DB_INVALID_PORT; + } + + /* check if the user passes some extra bits */ + if ((recordType | IX_ETH_DB_ALL_RECORD_TYPES) != IX_ETH_DB_ALL_RECORD_TYPES) + { + return IX_ETH_DB_INVALID_ARG; + } + + SET_EMPTY_DEPENDENCY_MAP(triggerPorts); + + /* browse database and age entries */ + BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); + + while (IS_ITERATOR_VALID(&iterator)) + { + MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; + + if (((descriptor->portID == portID) || (portID == IX_ETH_DB_ALL_PORTS)) + && ((descriptor->type & recordType) != 0)) + { + /* add to trigger if automatic updates are required */ + if (ixEthDBPortUpdateRequired[descriptor->type]) + { + /* add port to the set of update trigger ports */ + JOIN_PORT_TO_MAP(triggerPorts, descriptor->portID); + } + + /* delete entry */ + BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator)); + } + else + { + /* move to the next record */ + BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); + } + } + + /* update ports which lost records */ + ixEthDBUpdatePortLearningTrees(triggerPorts); + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + HashNode *searchResult; + IxEthDBStatus result = IX_ETH_DB_NO_SUCH_ADDR; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); + + searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); + + if (searchResult == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ + } + + if (((MacDescriptor *) (searchResult->data))->portID == portID) + { + result = IX_ETH_DB_SUCCESS; /* address and port match */ + } + + ixEthDBReleaseHashNode(searchResult); + + return result; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) +{ + HashNode *searchResult; + + IX_ETH_DB_CHECK_REFERENCE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); + + if (searchResult == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ + } + + /* return the port ID */ + *portID = ((MacDescriptor *) searchResult->data)->portID; + + ixEthDBReleaseHashNode(searchResult); + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); + + ixEthDBPortInfo[portID].agingEnabled = FALSE; + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_LEARNING); + + ixEthDBPortInfo[portID].agingEnabled = TRUE; + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) +{ + HashNode *searchResult; + MacDescriptor *descriptor; + + IX_ETH_DB_CHECK_REFERENCE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); + + if (searchResult == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ + } + + descriptor = (MacDescriptor *) searchResult->data; + + /* return the port ID */ + *portID = descriptor->portID; + + /* reset entry age */ + if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + descriptor->recordData.filteringData.age = 0; + } + else + { + descriptor->recordData.filteringVlanData.age = 0; + } + + ixEthDBReleaseHashNode(searchResult); + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(dependencyPortMap); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); + + /* force bit at offset 255 to 0 (reserved) */ + dependencyPortMap[31] &= 0xFE; + + COPY_DEPENDENCY_MAP(ixEthDBPortInfo[portID].dependencyPortMap, dependencyPortMap); + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(dependencyPortMap); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); + + COPY_DEPENDENCY_MAP(dependencyPortMap, ixEthDBPortInfo[portID].dependencyPortMap); + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FILTERING); + + ixEthDBPortInfo[portID].updateMethod.updateEnabled = enableUpdate; + ixEthDBPortInfo[portID].updateMethod.userControlled = TRUE; + + return IX_ETH_DB_SUCCESS; +} diff --git a/drivers/net/npe/IxEthDBAPISupport.c b/drivers/net/npe/IxEthDBAPISupport.c new file mode 100644 index 0000000000..36bc200a3f --- /dev/null +++ b/drivers/net/npe/IxEthDBAPISupport.c @@ -0,0 +1,675 @@ +/** + * @file IxEthDBAPISupport.c + * + * @brief Public API support functions + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include <IxEthDB.h> +#include <IxNpeMh.h> +#include <IxFeatureCtrl.h> + +#include "IxEthDB_p.h" +#include "IxEthDBMessages_p.h" +#include "IxEthDB_p.h" +#include "IxEthDBLog_p.h" + +#ifdef IX_UNIT_TEST + +int dbAccessCounter = 0; +int overflowEvent = 0; + +#endif + +/* + * External declaration + */ +extern HashTable dbHashtable; + +/* + * Internal declaration + */ +IX_ETH_DB_PUBLIC +PortInfo ixEthDBPortInfo[IX_ETH_DB_NUMBER_OF_PORTS]; + +IX_ETH_DB_PRIVATE +struct +{ + BOOL saved; + IxEthDBPriorityTable priorityTable; + IxEthDBVlanSet vlanMembership; + IxEthDBVlanSet transmitTaggingInfo; + IxEthDBFrameFilter frameFilter; + IxEthDBTaggingAction taggingAction; + IxEthDBFirewallMode firewallMode; + BOOL stpBlocked; + BOOL srcAddressFilterEnabled; + UINT32 maxRxFrameSize; + UINT32 maxTxFrameSize; +} ixEthDBPortState[IX_ETH_DB_NUMBER_OF_PORTS]; + +#define IX_ETH_DB_DEFAULT_FRAME_SIZE (1518) + +/** + * @brief initializes a port + * + * @param portID ID of the port to be initialized + * + * Note that redundant initializations are silently + * dealt with and do not constitute an error + * + * This function is fully documented in the main + * header file, IxEthDB.h + */ +IX_ETH_DB_PUBLIC +void ixEthDBPortInit(IxEthDBPortId portID) +{ + PortInfo *portInfo; + + if (portID >= IX_ETH_DB_NUMBER_OF_PORTS) + { + return; + } + + portInfo = &ixEthDBPortInfo[portID]; + + if (ixEthDBSingleEthNpeCheck(portID) != IX_ETH_DB_SUCCESS) + { + WARNING_LOG("EthDB: Unavailable Eth %d: Cannot initialize EthDB Port.\n", (UINT32) portID); + + return; + } + + if (portInfo->initialized) + { + /* redundant */ + return; + } + + /* initialize core fields */ + portInfo->portID = portID; + SET_DEPENDENCY_MAP(portInfo->dependencyPortMap, portID); + + /* default values */ + portInfo->agingEnabled = FALSE; + portInfo->enabled = FALSE; + portInfo->macAddressUploaded = FALSE; + portInfo->maxRxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE; + portInfo->maxTxFrameSize = IX_ETHDB_DEFAULT_FRAME_SIZE; + + /* default update control values */ + portInfo->updateMethod.searchTree = NULL; + portInfo->updateMethod.searchTreePendingWrite = FALSE; + portInfo->updateMethod.treeInitialized = FALSE; + portInfo->updateMethod.updateEnabled = FALSE; + portInfo->updateMethod.userControlled = FALSE; + + /* default WiFi parameters */ + memset(portInfo->bbsid, 0, sizeof (portInfo->bbsid)); + portInfo->frameControlDurationID = 0; + + /* Ethernet NPE-specific initializations */ + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + /* update handler */ + portInfo->updateMethod.updateHandler = ixEthDBNPEUpdateHandler; + } + + /* initialize state save */ + ixEthDBPortState[portID].saved = FALSE; + + portInfo->initialized = TRUE; +} + +/** + * @brief enables a port + * + * @param portID ID of the port to enable + * + * This function is fully documented in the main + * header file, IxEthDB.h + * + * @return IX_ETH_DB_SUCCESS if enabling was + * accomplished, or a meaningful error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) +{ + IxEthDBPortMap triggerPorts; + PortInfo *portInfo; + + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + portInfo = &ixEthDBPortInfo[portID]; + + if (portInfo->enabled) + { + /* redundant */ + return IX_ETH_DB_SUCCESS; + } + + SET_DEPENDENCY_MAP(triggerPorts, portID); + + /* mark as enabled */ + portInfo->enabled = TRUE; + + /* Operation stops here when Ethernet Learning is not enabled */ + if(IX_FEATURE_CTRL_SWCONFIG_DISABLED == + ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) + { + return IX_ETH_DB_SUCCESS; + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE && !portInfo->macAddressUploaded) + { + IX_ETH_DB_SUPPORT_TRACE("DB: (Support) MAC address not set on port %d, enable failed\n", portID); + + /* must use UnicastAddressSet() before enabling an NPE port */ + return IX_ETH_DB_MAC_UNINITIALIZED; + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Attempting to enable the NPE callback for port %d...\n", portID); + + if (!portInfo->updateMethod.userControlled + && ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0)) + { + portInfo->updateMethod.updateEnabled = TRUE; + } + + /* if this is first time initialization then we already have + write access to the tree and can AccessRelease directly */ + if (!portInfo->updateMethod.treeInitialized) + { + IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Initializing tree for port %d\n", portID); + + /* create an initial tree and release access into it */ + ixEthDBUpdatePortLearningTrees(triggerPorts); + + /* mark tree as being initialized */ + portInfo->updateMethod.treeInitialized = TRUE; + } + } + + if (ixEthDBPortState[portID].saved) + { + /* previous configuration data stored, restore state */ + if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) + { + ixEthDBFirewallModeSet(portID, ixEthDBPortState[portID].firewallMode); + ixEthDBFirewallInvalidAddressFilterEnable(portID, ixEthDBPortState[portID].srcAddressFilterEnabled); + } + +#if 0 /* test-only */ + if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) + { + ixEthDBAcceptableFrameTypeSet(portID, ixEthDBPortState[portID].frameFilter); + ixEthDBIngressVlanTaggingEnabledSet(portID, ixEthDBPortState[portID].taggingAction); + + ixEthDBEgressVlanTaggingEnabledSet(portID, ixEthDBPortState[portID].transmitTaggingInfo); + ixEthDBPortVlanMembershipSet(portID, ixEthDBPortState[portID].vlanMembership); + + ixEthDBPriorityMappingTableSet(portID, ixEthDBPortState[portID].priorityTable); + } +#endif + + if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) + { + ixEthDBSpanningTreeBlockingStateSet(portID, ixEthDBPortState[portID].stpBlocked); + } + + ixEthDBFilteringPortMaximumRxFrameSizeSet(portID, ixEthDBPortState[portID].maxRxFrameSize); + ixEthDBFilteringPortMaximumTxFrameSizeSet(portID, ixEthDBPortState[portID].maxTxFrameSize); + + /* discard previous save */ + ixEthDBPortState[portID].saved = FALSE; + } + + IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Enabling succeeded for port %d\n", portID); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief disables a port + * + * @param portID ID of the port to disable + * + * This function is fully documented in the + * main header file, IxEthDB.h + * + * @return IX_ETH_DB_SUCCESS if disabling was + * successful or an appropriate error message + * otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) +{ + HashIterator iterator; + IxEthDBPortMap triggerPorts; /* ports who will have deleted records and therefore will need updating */ + BOOL result; + PortInfo *portInfo; + IxEthDBFeature learningEnabled; +#if 0 /* test-only */ + IxEthDBPriorityTable classZeroTable; +#endif + + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + portInfo = &ixEthDBPortInfo[portID]; + + if (!portInfo->enabled) + { + /* redundant */ + return IX_ETH_DB_SUCCESS; + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + /* save filtering state */ + ixEthDBPortState[portID].firewallMode = portInfo->firewallMode; + ixEthDBPortState[portID].frameFilter = portInfo->frameFilter; + ixEthDBPortState[portID].taggingAction = portInfo->taggingAction; + ixEthDBPortState[portID].stpBlocked = portInfo->stpBlocked; + ixEthDBPortState[portID].srcAddressFilterEnabled = portInfo->srcAddressFilterEnabled; + ixEthDBPortState[portID].maxRxFrameSize = portInfo->maxRxFrameSize; + ixEthDBPortState[portID].maxTxFrameSize = portInfo->maxTxFrameSize; + + memcpy(ixEthDBPortState[portID].vlanMembership, portInfo->vlanMembership, sizeof (IxEthDBVlanSet)); + memcpy(ixEthDBPortState[portID].transmitTaggingInfo, portInfo->transmitTaggingInfo, sizeof (IxEthDBVlanSet)); + memcpy(ixEthDBPortState[portID].priorityTable, portInfo->priorityTable, sizeof (IxEthDBPriorityTable)); + + ixEthDBPortState[portID].saved = TRUE; + + /* now turn off all EthDB filtering features on the port */ + +#if 0 /* test-only */ + /* VLAN & QoS */ + if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) + { + ixEthDBPortVlanMembershipRangeAdd((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID); + ixEthDBEgressVlanRangeTaggingEnabledSet((IxEthDBPortId) portID, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID, FALSE); + ixEthDBAcceptableFrameTypeSet((IxEthDBPortId) portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); + ixEthDBIngressVlanTaggingEnabledSet((IxEthDBPortId) portID, IX_ETH_DB_PASS_THROUGH); + + memset(classZeroTable, 0, sizeof (classZeroTable)); + ixEthDBPriorityMappingTableSet((IxEthDBPortId) portID, classZeroTable); + } +#endif + + /* STP */ + if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) + { + ixEthDBSpanningTreeBlockingStateSet((IxEthDBPortId) portID, FALSE); + } + + /* Firewall */ + if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) + { + ixEthDBFirewallModeSet((IxEthDBPortId) portID, IX_ETH_DB_FIREWALL_BLACK_LIST); + ixEthDBFirewallTableDownload((IxEthDBPortId) portID); + ixEthDBFirewallInvalidAddressFilterEnable((IxEthDBPortId) portID, FALSE); + } + + /* Frame size filter */ + ixEthDBFilteringPortMaximumFrameSizeSet((IxEthDBPortId) portID, IX_ETH_DB_DEFAULT_FRAME_SIZE); + + /* WiFi */ + if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) + { + ixEthDBWiFiConversionTableDownload((IxEthDBPortId) portID); + } + + /* save and disable the learning feature bit */ + learningEnabled = portInfo->featureStatus & IX_ETH_DB_LEARNING; + portInfo->featureStatus &= ~IX_ETH_DB_LEARNING; + } + else + { + /* save the learning feature bit */ + learningEnabled = portInfo->featureStatus & IX_ETH_DB_LEARNING; + } + + SET_EMPTY_DEPENDENCY_MAP(triggerPorts); + + ixEthDBUpdateLock(); + + /* wipe out current entries for this port */ + BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); + + while (IS_ITERATOR_VALID(&iterator)) + { + MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; + + /* check if the port match. If so, remove the entry */ + if (descriptor->portID == portID + && (descriptor->type == IX_ETH_DB_FILTERING_RECORD || descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) + && !descriptor->recordData.filteringData.staticEntry) + { + /* delete entry */ + BUSY_RETRY(ixEthDBRemoveEntryAtHashIterator(&dbHashtable, &iterator)); + + /* add port to the set of update trigger ports */ + JOIN_PORT_TO_MAP(triggerPorts, portID); + } + else + { + /* move to the next record */ + BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); + } + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + if (portInfo->updateMethod.searchTree != NULL) + { + ixEthDBFreeMacTreeNode(portInfo->updateMethod.searchTree); + portInfo->updateMethod.searchTree = NULL; + } + + ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FILTERING_RECORD); + } + + /* mark as disabled */ + portInfo->enabled = FALSE; + + /* disable updates unless the user has specifically altered the default behavior */ + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + if (!portInfo->updateMethod.userControlled) + { + portInfo->updateMethod.updateEnabled = FALSE; + } + + /* make sure we re-initialize the NPE learning tree when the port is re-enabled */ + portInfo->updateMethod.treeInitialized = FALSE; + } + + ixEthDBUpdateUnlock(); + + /* restore learning feature bit */ + portInfo->featureStatus |= learningEnabled; + + /* if we've removed any records or lost any events make sure to force an update */ + IS_EMPTY_DEPENDENCY_MAP(result, triggerPorts); + + if (!result) + { + ixEthDBUpdatePortLearningTrees(triggerPorts); + } + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief sends the updated maximum Tx/Rx frame lengths to the NPE + * + * @param portID ID of the port to update + * + * @return IX_ETH_DB_SUCCESS if the update completed + * successfully or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBPortFrameLengthsUpdate(IxEthDBPortId portID) +{ + IxNpeMhMessage message; + PortInfo *portInfo = &ixEthDBPortInfo[portID]; + IX_STATUS result; + + FILL_SETMAXFRAMELENGTHS_MSG(message, portID, portInfo->maxRxFrameSize, portInfo->maxTxFrameSize); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief sets the port maximum Rx frame size + * + * @param portID ID of the port to set the frame size on + * @param maximumRxFrameSize maximum Rx frame size + * + * This function updates the internal data structures and + * calls ixEthDBPortFrameLengthsUpdate() for NPE update. + * + * This function is fully documented in the main header + * file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation was + * successfull or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortMaximumRxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumRxFrameSize) +{ + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + if (!ixEthDBPortInfo[portID].initialized) + { + return IX_ETH_DB_PORT_UNINITIALIZED; + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + if ((maximumRxFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) || + (maximumRxFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE)) + { + return IX_ETH_DB_INVALID_ARG; + } + } + else + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* update internal structure */ + ixEthDBPortInfo[portID].maxRxFrameSize = maximumRxFrameSize; + + /* update the maximum frame size in the NPE */ + return ixEthDBPortFrameLengthsUpdate(portID); +} + +/** + * @brief sets the port maximum Tx frame size + * + * @param portID ID of the port to set the frame size on + * @param maximumTxFrameSize maximum Tx frame size + * + * This function updates the internal data structures and + * calls ixEthDBPortFrameLengthsUpdate() for NPE update. + * + * This function is fully documented in the main header + * file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation was + * successfull or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortMaximumTxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumTxFrameSize) +{ + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + if (!ixEthDBPortInfo[portID].initialized) + { + return IX_ETH_DB_PORT_UNINITIALIZED; + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + if ((maximumTxFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) || + (maximumTxFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE)) + { + return IX_ETH_DB_INVALID_ARG; + } + } + else + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* update internal structure */ + ixEthDBPortInfo[portID].maxTxFrameSize = maximumTxFrameSize; + + /* update the maximum frame size in the NPE */ + return ixEthDBPortFrameLengthsUpdate(portID); +} + +/** + * @brief sets the port maximum Tx and Rx frame sizes + * + * @param portID ID of the port to set the frame size on + * @param maximumFrameSize maximum Tx and Rx frame sizes + * + * This function updates the internal data structures and + * calls ixEthDBPortFrameLengthsUpdate() for NPE update. + * + * Note that both the maximum Tx and Rx frame size are set + * to the same value. This function is kept for compatibility + * reasons. + * + * This function is fully documented in the main header + * file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation was + * successfull or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize) +{ + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + if (!ixEthDBPortInfo[portID].initialized) + { + return IX_ETH_DB_PORT_UNINITIALIZED; + } + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + if ((maximumFrameSize < IX_ETHDB_MIN_NPE_FRAME_SIZE) || + (maximumFrameSize > IX_ETHDB_MAX_NPE_FRAME_SIZE)) + { + return IX_ETH_DB_INVALID_ARG; + } + } + else + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* update internal structure */ + ixEthDBPortInfo[portID].maxRxFrameSize = maximumFrameSize; + ixEthDBPortInfo[portID].maxTxFrameSize = maximumFrameSize; + + /* update the maximum frame size in the NPE */ + return ixEthDBPortFrameLengthsUpdate(portID); +} + +/** + * @brief sets the MAC address of an NPE port + * + * @param portID port ID to set the MAC address on + * @param macAddr pointer to the 6-byte MAC address + * + * This function is called by the EthAcc + * ixEthAccUnicastMacAddressSet() and should not be + * manually invoked unless required by special circumstances. + * + * @return IX_ETH_DB_SUCCESS if the operation succeeded + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + IxNpeMhMessage message; + IX_STATUS result; + + /* use this macro instead CHECK_PORT + as the port doesn't need to be enabled */ + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + if (!ixEthDBPortInfo[portID].initialized) + { + return IX_ETH_DB_PORT_UNINITIALIZED; + } + + /* Operation stops here when Ethernet Learning is not enabled */ + if(IX_FEATURE_CTRL_SWCONFIG_DISABLED == + ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) + { + return IX_ETH_DB_SUCCESS; + } + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + /* exit if the port is not an Ethernet NPE */ + if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE) + { + return IX_ETH_DB_INVALID_PORT; + } + + /* populate message */ + FILL_SETPORTADDRESS_MSG(message, portID, macAddr->macAddress); + + IX_ETH_DB_SUPPORT_TRACE("DB: (Support) Sending SetPortAddress on port %d...\n", portID); + + /* send a SetPortAddress message */ + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + if (result == IX_SUCCESS) + { + ixEthDBPortInfo[portID].macAddressUploaded = TRUE; + } + + return result; +} diff --git a/drivers/net/npe/IxEthDBCore.c b/drivers/net/npe/IxEthDBCore.c new file mode 100644 index 0000000000..25b7cbb8b8 --- /dev/null +++ b/drivers/net/npe/IxEthDBCore.c @@ -0,0 +1,463 @@ +/** + * @file IxEthDBDBCore.c + * + * @brief Database support functions + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" + +/* list of database hashtables */ +IX_ETH_DB_PUBLIC HashTable dbHashtable; +IX_ETH_DB_PUBLIC MatchFunction matchFunctions[IX_ETH_DB_MAX_KEY_INDEX + 1]; +IX_ETH_DB_PUBLIC BOOL ixEthDBPortUpdateRequired[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; +IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyType[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; + +/* private initialization flag */ +IX_ETH_DB_PRIVATE BOOL ethDBInitializationComplete = FALSE; + +/** + * @brief initializes EthDB + * + * This function must be called to initialize the component. + * + * It does the following things: + * - checks the port definition structure + * - scans the capabilities of the NPE images and sets the + * capabilities of the ports accordingly + * - initializes the memory pools internally used in EthDB + * for storing database records and handling data + * - registers automatic update handlers for add and remove + * operations + * - registers hashing match functions, depending on key sets + * - initializes the main database hashtable + * - allocates contiguous memory zones to be used for NPE + * updates + * - registers the serialize methods used to convert data + * into NPE-readable format + * - starts the event processor + * + * Note that this function is documented in the public + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS or an appropriate error if the + * component failed to initialize correctly + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBInit(void) +{ + IxEthDBStatus result; + + if (ethDBInitializationComplete) + { + /* redundant */ + return IX_ETH_DB_SUCCESS; + } + + /* trap an invalid port definition structure */ + IX_ETH_DB_PORTS_ASSERTION; + + /* memory management */ + ixEthDBInitMemoryPools(); + + /* register hashing search methods */ + ixEthDBMatchMethodsRegister(matchFunctions); + + /* register type-based automatic port updates */ + ixEthDBUpdateTypeRegister(ixEthDBPortUpdateRequired); + + /* register record to key type mappings */ + ixEthDBKeyTypeRegister(ixEthDBKeyType); + + /* hash table */ + ixEthDBInitHash(&dbHashtable, NUM_BUCKETS, ixEthDBEntryXORHash, matchFunctions, (FreeFunction) ixEthDBFreeMacDescriptor); + + /* NPE update zones */ + ixEthDBNPEUpdateAreasInit(); + + /* register record serialization methods */ + ixEthDBRecordSerializeMethodsRegister(); + + /* start the event processor */ + result = ixEthDBEventProcessorInit(); + + /* scan NPE features */ + if (result == IX_ETH_DB_SUCCESS) + { + ixEthDBFeatureCapabilityScan(); + } + + ethDBInitializationComplete = TRUE; + + return result; +} + +/** + * @brief prepares EthDB for unloading + * + * This function must be called before removing the + * EthDB component from memory (e.g. doing rmmod in + * Linux) if the component is to be re-initialized again + * without rebooting the platform. + * + * All the EthDB ports must be disabled before this + * function is to be called. Failure to disable all + * the ports will return the IX_ETH_DB_BUSY error. + * + * This function will destroy mutexes, deallocate + * memory and stop the event processor. + * + * Note that this function is fully documented in the + * main component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if de-initialization + * completed successfully or an appropriate error + * message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUnload(void) +{ + IxEthDBPortId portIndex; + + if (!ethDBInitializationComplete) + { + /* redundant */ + return IX_ETH_DB_SUCCESS; + } + + /* check if any ports are enabled */ + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + if (ixEthDBPortInfo[portIndex].enabled) + { + return IX_ETH_DB_BUSY; + } + } + + /* free port resources */ + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) + { + ixOsalMutexDestroy(&ixEthDBPortInfo[portIndex].npeAckLock); + } + + ixEthDBPortInfo[portIndex].initialized = FALSE; + } + + /* shutdown event processor */ + ixEthDBStopLearningFunction(); + + /* deallocate NPE update zones */ + ixEthDBNPEUpdateAreasUnload(); + + ethDBInitializationComplete = FALSE; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief adds a new entry to the Ethernet database + * + * @param newRecordTemplate address of the record template to use + * @param updateTrigger port map containing the update triggers + * resulting from this update operation + * + * Creates a new database entry, populates it with the data + * copied from the given template and adds the record to the + * database hash table. + * It also checks whether the new record type is registered to trigger + * automatic updates; if it is, the update trigger will contain the + * port on which the record insertion was performed, as well as the + * old port in case the addition was a record migration (from one port + * to the other). The caller can use the updateTrigger to trigger + * automatic updates on the ports changed as a result of this addition. + * + * @retval IX_ETH_DB_SUCCESS addition successful + * @retval IX_ETH_DB_NOMEM insertion failed, no memory left in the mac descriptor memory pool + * @retval IX_ETH_DB_BUSY database busy, cannot insert due to locking + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBAdd(MacDescriptor *newRecordTemplate, IxEthDBPortMap updateTrigger) +{ + IxEthDBStatus result; + MacDescriptor *newDescriptor; + IxEthDBPortId originalPortID; + HashNode *node = NULL; + + BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, ixEthDBKeyType[newRecordTemplate->type], newRecordTemplate, &node)); + + TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; + + if (node == NULL) + { + /* not found, create a new one */ + newDescriptor = ixEthDBAllocMacDescriptor(); + + if (newDescriptor == NULL) + { + return IX_ETH_DB_NOMEM; /* no memory */ + } + + /* old port does not exist, avoid unnecessary updates */ + originalPortID = newRecordTemplate->portID; + } + else + { + /* a node with the same key exists, will update node */ + newDescriptor = (MacDescriptor *) node->data; + + /* save original port id */ + originalPortID = newDescriptor->portID; + } + + /* copy/update fields into new record */ + memcpy(newDescriptor->macAddress, newRecordTemplate->macAddress, sizeof (IxEthDBMacAddr)); + memcpy(&newDescriptor->recordData, &newRecordTemplate->recordData, sizeof (IxEthDBRecordData)); + + newDescriptor->type = newRecordTemplate->type; + newDescriptor->portID = newRecordTemplate->portID; + newDescriptor->user = newRecordTemplate->user; + + if (node == NULL) + { + /* new record, insert into hashtable */ + BUSY_RETRY_WITH_RESULT(ixEthDBAddHashEntry(&dbHashtable, newDescriptor), result); + + if (result != IX_ETH_DB_SUCCESS) + { + ixEthDBFreeMacDescriptor(newDescriptor); + + return result; /* insertion failed */ + } + } + + if (node != NULL) + { + /* release access */ + ixEthDBReleaseHashNode(node); + } + + /* trigger add/remove update if required by type */ + if (updateTrigger != NULL && + ixEthDBPortUpdateRequired[newRecordTemplate->type]) + { + /* add new port to update list */ + JOIN_PORT_TO_MAP(updateTrigger, newRecordTemplate->portID); + + /* check if record has moved, we'll need to update the old port as well */ + if (originalPortID != newDescriptor->portID) + { + JOIN_PORT_TO_MAP(updateTrigger, originalPortID); + } + } + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief remove a record from the Ethernet database + * + * @param templateRecord template record used to determine + * what record is to be removed + * @param updateTrigger port map containing the update triggers + * resulting from this update operation + * + * This function will examine the template record it receives + * and attempts to delete a record of the same type and containing + * the same keys as the template record. If deletion is successful + * and the record type is registered for automatic port updates the + * port will also be set in the updateTrigger port map, so that the + * client can perform an update of the port. + * + * @retval IX_ETH_DB_SUCCESS removal was successful + * @retval IX_ETH_DB_NO_SUCH_ADDR the record with the given MAC address was not found + * @retval IX_ETH_DB_BUSY database busy, cannot remove due to locking + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBRemove(MacDescriptor *templateRecord, IxEthDBPortMap updateTrigger) +{ + IxEthDBStatus result; + + TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; + + BUSY_RETRY_WITH_RESULT(ixEthDBRemoveHashEntry(&dbHashtable, ixEthDBKeyType[templateRecord->type], templateRecord), result); + + if (result != IX_ETH_DB_SUCCESS) + { + return IX_ETH_DB_NO_SUCH_ADDR; /* not found */ + } + + /* trigger add/remove update if required by type */ + if (updateTrigger != NULL + &&ixEthDBPortUpdateRequired[templateRecord->type]) + { + /* add new port to update list */ + JOIN_PORT_TO_MAP(updateTrigger, templateRecord->portID); + } + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief register record key types + * + * This function registers the appropriate key types, + * depending on record types. + * + * All filtering records use the MAC address as the key. + * WiFi and Firewall records use a compound key consisting + * in both the MAC address and the port ID. + * + * @return the number of registered record types + */ +IX_ETH_DB_PUBLIC +UINT32 ixEthDBKeyTypeRegister(UINT32 *keyType) +{ + /* safety */ + memset(keyType, 0, sizeof (keyType)); + + /* register all known record types */ + keyType[IX_ETH_DB_FILTERING_RECORD] = IX_ETH_DB_MAC_KEY; + keyType[IX_ETH_DB_FILTERING_VLAN_RECORD] = IX_ETH_DB_MAC_KEY; + keyType[IX_ETH_DB_ALL_FILTERING_RECORDS] = IX_ETH_DB_MAC_KEY; + keyType[IX_ETH_DB_WIFI_RECORD] = IX_ETH_DB_MAC_PORT_KEY; + keyType[IX_ETH_DB_FIREWALL_RECORD] = IX_ETH_DB_MAC_PORT_KEY; + + return 5; +} + +/** + * @brief Sets a user-defined field into a database record + * + * Note that this function is fully documented in the main component + * header file. + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field) +{ + HashNode *result = NULL; + + if (macAddr == NULL) + { + return IX_ETH_DB_INVALID_ARG; + } + + if (recordType == IX_ETH_DB_FILTERING_RECORD) + { + result = ixEthDBSearch(macAddr, recordType); + } + else if (recordType == IX_ETH_DB_FILTERING_VLAN_RECORD) + { + result = ixEthDBVlanSearch(macAddr, vlanID, recordType); + } + else if (recordType == IX_ETH_DB_WIFI_RECORD || recordType == IX_ETH_DB_FIREWALL_RECORD) + { + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + result = ixEthDBPortSearch(macAddr, portID, recordType); + } + else + { + return IX_ETH_DB_INVALID_ARG; + } + + if (result == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; + } + + ((MacDescriptor *) result->data)->user = field; + + ixEthDBReleaseHashNode(result); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief Retrieves a user-defined field from a database record + * + * Note that this function is fully documented in the main component + * header file. + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field) +{ + HashNode *result = NULL; + + if (macAddr == NULL || field == NULL) + { + return IX_ETH_DB_INVALID_ARG; + } + + if (recordType == IX_ETH_DB_FILTERING_RECORD) + { + result = ixEthDBSearch(macAddr, recordType); + } + else if (recordType == IX_ETH_DB_FILTERING_VLAN_RECORD) + { + result = ixEthDBVlanSearch(macAddr, vlanID, recordType); + } + else if (recordType == IX_ETH_DB_WIFI_RECORD || recordType == IX_ETH_DB_FIREWALL_RECORD) + { + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + result = ixEthDBPortSearch(macAddr, portID, recordType); + } + else + { + return IX_ETH_DB_INVALID_ARG; + } + + if (result == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; + } + + *field = ((MacDescriptor *) result->data)->user; + + ixEthDBReleaseHashNode(result); + + return IX_ETH_DB_SUCCESS; +} diff --git a/drivers/net/npe/IxEthDBEvents.c b/drivers/net/npe/IxEthDBEvents.c new file mode 100644 index 0000000000..4d44e03337 --- /dev/null +++ b/drivers/net/npe/IxEthDBEvents.c @@ -0,0 +1,520 @@ +/** + * @file IxEthDBEvents.c + * + * @brief Implementation of the event processor component + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include <IxNpeMh.h> +#include <IxFeatureCtrl.h> + +#include "IxEthDB_p.h" + +/* forward prototype declarations */ +IX_ETH_DB_PUBLIC void ixEthDBEventProcessorLoop(void *); +IX_ETH_DB_PUBLIC void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); +IX_ETH_DB_PRIVATE void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts); +IX_ETH_DB_PRIVATE IxEthDBStatus ixEthDBTriggerPortUpdate(UINT32 eventType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStartLearningFunction(void); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void); + +/* data */ +IX_ETH_DB_PRIVATE IxOsalSemaphore eventQueueSemaphore; +IX_ETH_DB_PRIVATE PortEventQueue eventQueue; +IX_ETH_DB_PRIVATE IxOsalMutex eventQueueLock; +IX_ETH_DB_PRIVATE IxOsalMutex portUpdateLock; + +IX_ETH_DB_PRIVATE BOOL ixEthDBLearningShutdown = FALSE; +IX_ETH_DB_PRIVATE BOOL ixEthDBEventProcessorRunning = FALSE; + +/* imported data */ +extern HashTable dbHashtable; + +/** + * @brief initializes the event processor + * + * Initializes the event processor queue and processing thread. + * Called from ixEthDBInit() DB-subcomponent master init function. + * + * @warning do not call directly + * + * @retval IX_ETH_DB_SUCCESS initialization was successful + * @retval IX_ETH_DB_FAIL initialization failed (OSAL or mutex init failure) + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEventProcessorInit(void) +{ + if (ixOsalMutexInit(&portUpdateLock) != IX_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + + if (ixOsalMutexInit(&eventQueueLock) != IX_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + + if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == + ixFeatureCtrlSwConfigurationCheck (IX_FEATURECTRL_ETH_LEARNING)) + { + + /* start processor loop thread */ + if (ixEthDBStartLearningFunction() != IX_ETH_DB_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + } + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief initializes the event queue and the event processor + * + * This function is called by the component initialization + * function, ixEthDBInit(). + * + * @warning do not call directly + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or IX_ETH_DB_FAIL otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBStartLearningFunction(void) +{ + IxOsalThread eventProcessorThread; + IxOsalThreadAttr threadAttr; + + threadAttr.name = "EthDB event thread"; + threadAttr.stackSize = 32 * 1024; /* 32kbytes */ + threadAttr.priority = 128; + + /* reset event queue */ + ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); + + RESET_QUEUE(&eventQueue); + + ixOsalMutexUnlock(&eventQueueLock); + + /* init event queue semaphore */ + if (ixOsalSemaphoreInit(&eventQueueSemaphore, 0) != IX_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + + ixEthDBLearningShutdown = FALSE; + + /* create processor loop thread */ + if (ixOsalThreadCreate(&eventProcessorThread, &threadAttr, ixEthDBEventProcessorLoop, NULL) != IX_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + + /* start event processor */ + ixOsalThreadStart(&eventProcessorThread); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief stops the event processor + * + * Stops the event processor and frees the event queue semaphore + * Called by the component de-initialization function, ixEthDBUnload() + * + * @warning do not call directly + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or IX_ETH_DB_FAIL otherwise; + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBStopLearningFunction(void) +{ + ixEthDBLearningShutdown = TRUE; + + /* wake up event processing loop to actually process the shutdown event */ + ixOsalSemaphorePost(&eventQueueSemaphore); + + if (ixOsalSemaphoreDestroy(&eventQueueSemaphore) != IX_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief default NPE event processing callback + * + * @param npeID ID of the NPE that generated the event + * @param msg NPE message (encapsulated event) + * + * Creates an event object on the Ethernet event processor queue + * and signals the new event by incrementing the event queue semaphore. + * Events are processed by @ref ixEthDBEventProcessorLoop() which runs + * at user level. + * + * @see ixEthDBEventProcessorLoop() + * + * @warning do not call directly + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg) +{ + PortEvent *local_event; + + IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) new event received by processor callback from port %d, id 0x%X\n", IX_ETH_DB_NPE_TO_PORT_ID(npeID), NPE_MSG_ID(msg), 0, 0, 0, 0); + + if (CAN_ENQUEUE(&eventQueue)) + { + TEST_FIXTURE_LOCK_EVENT_QUEUE; + + local_event = QUEUE_HEAD(&eventQueue); + + /* create event structure on queue */ + local_event->eventType = NPE_MSG_ID(msg); + local_event->portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID); + + /* update queue */ + PUSH_UPDATE_QUEUE(&eventQueue); + + TEST_FIXTURE_UNLOCK_EVENT_QUEUE; + + IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) Waking up main processor loop...\n", 0, 0, 0, 0, 0, 0); + + /* increment event queue semaphore */ + ixOsalSemaphorePost(&eventQueueSemaphore); + } + else + { + IX_ETH_DB_IRQ_EVENTS_TRACE("DB: (Events) Warning: could not enqueue event (overflow)\n", 0, 0, 0, 0, 0, 0); + } +} + +/** + * @brief Ethernet event processor loop + * + * Extracts at most EVENT_PROCESSING_LIMIT batches of events and + * sends them for processing to @ref ixEthDBProcessEvent(). + * Triggers port updates which normally follow learning events. + * + * @warning do not call directly, executes in separate thread + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBEventProcessorLoop(void *unused1) +{ + IxEthDBPortMap triggerPorts; + IxEthDBPortId portIndex; + + ixEthDBEventProcessorRunning = TRUE; + + IX_ETH_DB_EVENTS_TRACE("DB: (Events) Event processor loop was started\n"); + + while (!ixEthDBLearningShutdown) + { + BOOL keepProcessing = TRUE; + UINT32 processedEvents = 0; + + IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Waiting for new learning event...\n"); + + ixOsalSemaphoreWait(&eventQueueSemaphore, IX_OSAL_WAIT_FOREVER); + + IX_ETH_DB_EVENTS_VERBOSE_TRACE("DB: (Events) Received new event\n"); + + if (!ixEthDBLearningShutdown) + { + /* port update handling */ + SET_EMPTY_DEPENDENCY_MAP(triggerPorts); + + while (keepProcessing) + { + PortEvent local_event; + UINT32 intLockKey; + + /* lock queue */ + ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); + + /* lock NPE interrupts */ + intLockKey = ixOsalIrqLock(); + + /* extract event */ + local_event = *(QUEUE_TAIL(&eventQueue)); + + SHIFT_UPDATE_QUEUE(&eventQueue); + + ixOsalIrqUnlock(intLockKey); + + ixOsalMutexUnlock(&eventQueueLock); + + IX_ETH_DB_EVENTS_TRACE("DB: (Events) Processing event with ID 0x%X\n", local_event.eventType); + + ixEthDBProcessEvent(&local_event, triggerPorts); + + processedEvents++; + + if (processedEvents > EVENT_PROCESSING_LIMIT /* maximum burst reached? */ + || ixOsalSemaphoreTryWait(&eventQueueSemaphore) != IX_SUCCESS) /* or empty queue? */ + { + keepProcessing = FALSE; + } + } + + ixEthDBUpdatePortLearningTrees(triggerPorts); + } + } + + /* turn off automatic updates */ + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + ixEthDBPortInfo[portIndex].updateMethod.updateEnabled = FALSE; + } + + ixEthDBEventProcessorRunning = FALSE; +} + +/** + * @brief event processor routine + * + * @param event event to be processed + * @param triggerPorts port map accumulating ports to be updated + * + * Processes learning events by synchronizing the database with + * newly learnt data. Called only by @ref ixEthDBEventProcessorLoop(). + * + * @warning do not call directly + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBProcessEvent(PortEvent *local_event, IxEthDBPortMap triggerPorts) +{ + MacDescriptor recordTemplate; + + switch (local_event->eventType) + { + case IX_ETH_DB_ADD_FILTERING_RECORD: + /* add record */ + memset(&recordTemplate, 0, sizeof (recordTemplate)); + memcpy(recordTemplate.macAddress, local_event->macAddr.macAddress, sizeof (IxEthDBMacAddr)); + + recordTemplate.type = IX_ETH_DB_FILTERING_RECORD; + recordTemplate.portID = local_event->portID; + recordTemplate.recordData.filteringData.staticEntry = local_event->staticEntry; + + ixEthDBAdd(&recordTemplate, triggerPorts); + + IX_ETH_DB_EVENTS_TRACE("DB: (Events) Added record on port %d\n", local_event->portID); + + break; + + case IX_ETH_DB_REMOVE_FILTERING_RECORD: + /* remove record */ + memset(&recordTemplate, 0, sizeof (recordTemplate)); + memcpy(recordTemplate.macAddress, local_event->macAddr.macAddress, sizeof (IxEthDBMacAddr)); + + recordTemplate.type = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD; + + ixEthDBRemove(&recordTemplate, triggerPorts); + + IX_ETH_DB_EVENTS_TRACE("DB: (Events) Removed record on port %d\n", local_event->portID); + + break; + + default: + /* can't handle/not interested in this event type */ + ERROR_LOG("DB: (Events) Event processor received an unknown event type (0x%X)\n", local_event->eventType); + + return; + } +} + +/** + * @brief asynchronously adds a filtering record + * by posting an ADD_FILTERING_RECORD event to the event queue + * + * @param macAddr MAC address of the new record + * @param portID port ID of the new record + * @param staticEntry TRUE if record is static, FALSE if dynamic + * + * @return IX_ETH_DB_SUCCESS if the event creation was + * successfull or IX_ETH_DB_BUSY if the event queue is full + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBTriggerAddPortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry) +{ + MacDescriptor reference; + + TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; + + /* fill search fields */ + memcpy(reference.macAddress, macAddr, sizeof (IxEthDBMacAddr)); + reference.portID = portID; + + /* set acceptable record types */ + reference.type = IX_ETH_DB_ALL_FILTERING_RECORDS; + + if (ixEthDBPeekHashEntry(&dbHashtable, IX_ETH_DB_MAC_PORT_KEY, &reference) == IX_ETH_DB_SUCCESS) + { + /* already have an identical record */ + return IX_ETH_DB_SUCCESS; + } + else + { + return ixEthDBTriggerPortUpdate(IX_ETH_DB_ADD_FILTERING_RECORD, macAddr, portID, staticEntry); + } +} + +/** + * @brief asynchronously removes a filtering record + * by posting a REMOVE_FILTERING_RECORD event to the event queue + * + * @param macAddr MAC address of the record to remove + * @param portID port ID of the record to remove + * + * @return IX_ETH_DB_SUCCESS if the event creation was + * successfull or IX_ETH_DB_BUSY if the event queue is full + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID) +{ + if (ixEthDBPeek(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS) != IX_ETH_DB_NO_SUCH_ADDR) + { + return ixEthDBTriggerPortUpdate(IX_ETH_DB_REMOVE_FILTERING_RECORD, macAddr, portID, FALSE); + } + else + { + return IX_ETH_DB_NO_SUCH_ADDR; + } +} + +/** + * @brief adds an ADD or REMOVE event to the main event queue + * + * @param eventType event type - IX_ETH_DB_ADD_FILTERING_RECORD + * to add and IX_ETH_DB_REMOVE_FILTERING_RECORD to remove a + * record. + * + * @return IX_ETH_DB_SUCCESS if the event was successfully + * sent or IX_ETH_DB_BUSY if the event queue is full + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBTriggerPortUpdate(UINT32 eventType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry) +{ + UINT32 intLockKey; + + /* lock interrupts to protect queue */ + intLockKey = ixOsalIrqLock(); + + if (CAN_ENQUEUE(&eventQueue)) + { + PortEvent *queueEvent = QUEUE_HEAD(&eventQueue); + + /* update fields on the queue */ + memcpy(queueEvent->macAddr.macAddress, macAddr->macAddress, sizeof (IxEthDBMacAddr)); + + queueEvent->eventType = eventType; + queueEvent->portID = portID; + queueEvent->staticEntry = staticEntry; + + PUSH_UPDATE_QUEUE(&eventQueue); + + /* imcrement event queue semaphore */ + ixOsalSemaphorePost(&eventQueueSemaphore); + + /* unlock interrupts */ + ixOsalIrqUnlock(intLockKey); + + return IX_ETH_DB_SUCCESS; + } + else /* event queue full */ + { + /* unlock interrupts */ + ixOsalIrqUnlock(intLockKey); + + return IX_ETH_DB_BUSY; + } +} + +/** + * @brief Locks learning tree updates and port disable + * + * + * This function locks portUpdateLock single mutex. It is primarily used + * to avoid executing 'port disable' during ELT maintenance. + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBUpdateLock(void) +{ + ixOsalMutexLock(&portUpdateLock, IX_OSAL_WAIT_FOREVER); +} + +/** + * @brief Unlocks learning tree updates and port disable + * + * + * This function unlocks a portUpdateLock mutex. It is primarily used + * to avoid executing 'port disable' during ELT maintenance. + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBUpdateUnlock(void) +{ + ixOsalMutexUnlock(&portUpdateLock); +} + diff --git a/drivers/net/npe/IxEthDBFeatures.c b/drivers/net/npe/IxEthDBFeatures.c new file mode 100644 index 0000000000..7a58d268ca --- /dev/null +++ b/drivers/net/npe/IxEthDBFeatures.c @@ -0,0 +1,662 @@ +/** + * @file IxEthDBFeatures.c + * + * @brief Implementation of the EthDB feature control API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxNpeDl.h" +#include "IxEthDBQoS.h" +#include "IxEthDB_p.h" + +/** + * @brief scans the capabilities of the loaded NPE images + * + * This function MUST be called by the ixEthDBInit() function. + * No EthDB features (including learning and filtering) are enabled + * before this function is called. + * + * @return none + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBFeatureCapabilityScan(void) +{ + IxNpeDlImageId imageId, npeAImageId; + IxEthDBPortId portIndex; + PortInfo *portInfo; + IxEthDBPriorityTable defaultPriorityTable; + IX_STATUS result; + UINT32 queueIndex; + UINT32 queueStructureIndex; + UINT32 trafficClassDefinitionIndex; + + /* read version of NPE A - required to set the AQM queues for B and C */ + npeAImageId.functionalityId = 0; + ixNpeDlLoadedImageGet(IX_NPEDL_NPEID_NPEA, &npeAImageId); + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + IxNpeMhMessage msg; + + portInfo = &ixEthDBPortInfo[portIndex]; + + /* check and bypass if NPE B or C is fused out */ + if (ixEthDBSingleEthNpeCheck(portIndex) != IX_ETH_DB_SUCCESS) continue; + + /* all ports are capable of LEARNING by default */ + portInfo->featureCapability |= IX_ETH_DB_LEARNING; + portInfo->featureStatus |= IX_ETH_DB_LEARNING; + + if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) + { + + if (ixNpeDlLoadedImageGet(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), &imageId) != IX_SUCCESS) + { + WARNING_LOG("DB: (FeatureScan) NpeDl did not provide the image ID for NPE port %d\n", portIndex); + } + else + { + /* initialize and empty NPE response mutex */ + ixOsalMutexInit(&portInfo->npeAckLock); + ixOsalMutexLock(&portInfo->npeAckLock, IX_OSAL_WAIT_FOREVER); + + /* check NPE response to GetStatus */ + msg.data[0] = IX_ETHNPE_NPE_GETSTATUS << 24; + msg.data[1] = 0; + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portIndex), msg, result); + if (result != IX_SUCCESS) + { + WARNING_LOG("DB: (FeatureScan) warning, could not send message to the NPE\n"); + continue; + } + + + if (imageId.functionalityId == 0x00 + || imageId.functionalityId == 0x03 + || imageId.functionalityId == 0x04 + || imageId.functionalityId == 0x80) + { + portInfo->featureCapability |= IX_ETH_DB_FILTERING; + portInfo->featureCapability |= IX_ETH_DB_FIREWALL; + portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL; + } + else if (imageId.functionalityId == 0x01 + || imageId.functionalityId == 0x81) + { + portInfo->featureCapability |= IX_ETH_DB_FILTERING; + portInfo->featureCapability |= IX_ETH_DB_FIREWALL; + portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL; + portInfo->featureCapability |= IX_ETH_DB_VLAN_QOS; + } + else if (imageId.functionalityId == 0x02 + || imageId.functionalityId == 0x82) + { + portInfo->featureCapability |= IX_ETH_DB_WIFI_HEADER_CONVERSION; + portInfo->featureCapability |= IX_ETH_DB_FIREWALL; + portInfo->featureCapability |= IX_ETH_DB_SPANNING_TREE_PROTOCOL; + portInfo->featureCapability |= IX_ETH_DB_VLAN_QOS; + } + + /* reset AQM queues */ + memset(portInfo->ixEthDBTrafficClassAQMAssignments, 0, sizeof (portInfo->ixEthDBTrafficClassAQMAssignments)); + + /* ensure there's at least one traffic class record in the definition table, otherwise we have no default case, hence no queues */ + IX_ENSURE(sizeof (ixEthDBTrafficClassDefinitions) != 0, "DB: no traffic class definitions found, check IxEthDBQoS.h"); + + /* find the traffic class definition index compatible with the current NPE A functionality ID */ + for (trafficClassDefinitionIndex = 0 ; + trafficClassDefinitionIndex < sizeof (ixEthDBTrafficClassDefinitions) / sizeof (ixEthDBTrafficClassDefinitions[0]); + trafficClassDefinitionIndex++) + { + if (ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX] == npeAImageId.functionalityId) + { + /* found it */ + break; + } + } + + /* select the default case if we went over the array boundary */ + if (trafficClassDefinitionIndex == sizeof (ixEthDBTrafficClassDefinitions) / sizeof (ixEthDBTrafficClassDefinitions[0])) + { + trafficClassDefinitionIndex = 0; /* the first record is the default case */ + } + + /* select queue assignment structure based on the traffic class configuration index */ + queueStructureIndex = ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_QUEUE_ASSIGNMENT_INDEX]; + + /* only traffic class 0 is active at initialization time */ + portInfo->ixEthDBTrafficClassCount = 1; + + /* enable port, VLAN and Firewall feature bits to initialize QoS/VLAN/Firewall configuration */ + portInfo->featureStatus |= IX_ETH_DB_VLAN_QOS; + portInfo->featureStatus |= IX_ETH_DB_FIREWALL; + portInfo->enabled = TRUE; + +#define CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ +#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ + /* set VLAN initial configuration (permissive) */ + if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) /* QoS-enabled image */ + { + /* QoS capable */ + portInfo->ixEthDBTrafficClassAvailable = ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_TRAFFIC_CLASS_COUNT_INDEX]; + + /* set AQM queues */ + for (queueIndex = 0 ; queueIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; queueIndex++) + { + portInfo->ixEthDBTrafficClassAQMAssignments[queueIndex] = ixEthDBQueueAssignments[queueStructureIndex][queueIndex]; + } + + /* set default PVID (0) and default traffic class 0 */ + ixEthDBPortVlanTagSet(portIndex, 0); + + /* enable reception of all frames */ + ixEthDBAcceptableFrameTypeSet(portIndex, IX_ETH_DB_ACCEPT_ALL_FRAMES); + + /* clear full VLAN membership */ + ixEthDBPortVlanMembershipRangeRemove(portIndex, 0, IX_ETH_DB_802_1Q_MAX_VLAN_ID); + + /* clear TTI table - no VLAN tagged frames will be transmitted */ + ixEthDBEgressVlanRangeTaggingEnabledSet(portIndex, 0, 4094, FALSE); + + /* set membership on 0, otherwise no Tx or Rx is working */ + ixEthDBPortVlanMembershipAdd(portIndex, 0); + } + else /* QoS not available in this image */ +#endif /* test-only */ + { + /* initialize traffic class availability (only class 0 is available) */ + portInfo->ixEthDBTrafficClassAvailable = 1; + + /* point all AQM queues to traffic class 0 */ + for (queueIndex = 0 ; queueIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; queueIndex++) + { + portInfo->ixEthDBTrafficClassAQMAssignments[queueIndex] = + ixEthDBQueueAssignments[queueStructureIndex][0]; + } + } + +#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ + /* download priority mapping table and Rx queue configuration */ + memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable)); + ixEthDBPriorityMappingTableSet(portIndex, defaultPriorityTable); +#endif + + /* by default we turn off invalid source MAC address filtering */ + ixEthDBFirewallInvalidAddressFilterEnable(portIndex, FALSE); + + /* disable port, VLAN, Firewall feature bits */ + portInfo->featureStatus &= ~IX_ETH_DB_VLAN_QOS; + portInfo->featureStatus &= ~IX_ETH_DB_FIREWALL; + portInfo->enabled = FALSE; + + /* enable filtering by default if present */ + if ((portInfo->featureCapability & IX_ETH_DB_FILTERING) != 0) + { + portInfo->featureStatus |= IX_ETH_DB_FILTERING; + } + } + } + } +} + +/** + * @brief returns the capability of a port + * + * @param portID ID of the port + * @param featureSet location to store the port capability in + * + * This function will save the capability set of the given port + * into the given location. Capabilities are bit-ORed, each representing + * a bit of the feature set. + * + * Note that this function is documented in the main component + * public header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or IX_ETH_DB_INVALID_PORT if the given port is invalid + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet) +{ + IX_ETH_DB_CHECK_PORT_INITIALIZED(portID); + + IX_ETH_DB_CHECK_REFERENCE(featureSet); + + *featureSet = ixEthDBPortInfo[portID].featureCapability; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief enables or disables a port capability + * + * @param portID ID of the port + * @param feature feature to enable or disable + * @param enabled TRUE to enable the selected feature or FALSE to disable it + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enable) +{ + PortInfo *portInfo; + IxEthDBPriorityTable defaultPriorityTable; + IxEthDBVlanSet vlanSet; + IxEthDBStatus status = IX_ETH_DB_SUCCESS; + BOOL portEnabled; + + IX_ETH_DB_CHECK_PORT_INITIALIZED(portID); + + portInfo = &ixEthDBPortInfo[portID]; + portEnabled = portInfo->enabled; + + /* check that only one feature is selected */ + if (!ixEthDBCheckSingleBitValue(feature)) + { + return IX_ETH_DB_FEATURE_UNAVAILABLE; + } + + /* port capable of this feature? */ + if ((portInfo->featureCapability & feature) == 0) + { + return IX_ETH_DB_FEATURE_UNAVAILABLE; + } + + /* mutual exclusion between learning and WiFi header conversion */ + if (enable && ((feature | portInfo->featureStatus) & (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION)) + == (IX_ETH_DB_FILTERING | IX_ETH_DB_WIFI_HEADER_CONVERSION)) + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* learning must be enabled before filtering */ + if (enable && (feature == IX_ETH_DB_FILTERING) && ((portInfo->featureStatus & IX_ETH_DB_LEARNING) == 0)) + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* filtering must be disabled before learning */ + if (!enable && (feature == IX_ETH_DB_LEARNING) && ((portInfo->featureStatus & IX_ETH_DB_FILTERING) != 0)) + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* redundant enabling or disabling */ + if ((!enable && ((portInfo->featureStatus & feature) == 0)) + || (enable && ((portInfo->featureStatus & feature) != 0))) + { + /* do nothing */ + return IX_ETH_DB_SUCCESS; + } + + /* force port enabled */ + portInfo->enabled = TRUE; + + if (enable) + { + /* turn on enable bit */ + portInfo->featureStatus |= feature; + +#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ + /* if this is VLAN/QoS set the default priority table */ + if (feature == IX_ETH_DB_VLAN_QOS) + { + /* turn on VLAN/QoS (most permissive mode): + - set default 802.1Q priority mapping table, in accordance to the + availability of traffic classes + - set the acceptable frame filter to accept all + - set the Ingress tagging mode to pass-through + - set full VLAN membership list + - set full TTI table + - set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0) + - enable TPID port extraction + */ + + portInfo->ixEthDBTrafficClassCount = portInfo->ixEthDBTrafficClassAvailable; + + /* set default 802.1Q priority mapping table - note that C indexing starts from 0, so we substract 1 here */ + memcpy (defaultPriorityTable, + (const void *) ixEthIEEE802_1QUserPriorityToTrafficClassMapping[portInfo->ixEthDBTrafficClassCount - 1], + sizeof (defaultPriorityTable)); + + /* update priority mapping and AQM queue assignments */ + status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable); + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); + } + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH); + } + + /* set membership and TTI tables */ + memset (vlanSet, 0xFF, sizeof (vlanSet)); + + if (status == IX_ETH_DB_SUCCESS) + { + /* use the internal function to bypass PVID check */ + status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet); + } + + if (status == IX_ETH_DB_SUCCESS) + { + /* use the internal function to bypass PVID check */ + status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet); + } + + /* reset the PVID */ + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBPortVlanTagSet(portID, 0); + } + + /* enable TPID port extraction */ + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBVlanPortExtractionEnable(portID, TRUE); + } + } + else if (feature == IX_ETH_DB_FIREWALL) +#endif + { + /* firewall starts in black-list mode unless otherwise configured before * + * note that invalid source MAC address filtering is disabled by default */ + if (portInfo->firewallMode != IX_ETH_DB_FIREWALL_BLACK_LIST + && portInfo->firewallMode != IX_ETH_DB_FIREWALL_WHITE_LIST) + { + status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST); + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE); + } + } + } + + if (status != IX_ETH_DB_SUCCESS) + { + /* checks failed, disable */ + portInfo->featureStatus &= ~feature; + } + } + else + { + /* turn off features */ + if (feature == IX_ETH_DB_FIREWALL) + { + /* turning off the firewall is equivalent to: + - set to black-list mode + - clear all the entries and download the new table + - turn off the invalid source address checking + */ + + status = ixEthDBDatabaseClear(portID, IX_ETH_DB_FIREWALL_RECORD); + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBFirewallModeSet(portID, IX_ETH_DB_FIREWALL_BLACK_LIST); + } + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBFirewallInvalidAddressFilterEnable(portID, FALSE); + } + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBFirewallTableDownload(portID); + } + } + else if (feature == IX_ETH_DB_WIFI_HEADER_CONVERSION) + { + /* turn off header conversion */ + status = ixEthDBDatabaseClear(portID, IX_ETH_DB_WIFI_RECORD); + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBWiFiConversionTableDownload(portID); + } + } +#ifdef CONFIG_WITH_VLAN /* test-only: VLAN support not included to save space!!! */ + else if (feature == IX_ETH_DB_VLAN_QOS) + { + /* turn off VLAN/QoS: + - set a priority mapping table with one traffic class + - set the acceptable frame filter to accept all + - set the Ingress tagging mode to pass-through + - clear the VLAN membership list + - clear the TTI table + - set the default 802.1Q tag to 0 (VLAN ID 0, Pri 0, CFI 0) + - disable TPID port extraction + */ + + /* initialize all => traffic class 0 priority mapping table */ + memset (defaultPriorityTable, 0, sizeof (defaultPriorityTable)); + portInfo->ixEthDBTrafficClassCount = 1; + status = ixEthDBPriorityMappingTableSet(portID, defaultPriorityTable); + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBAcceptableFrameTypeSet(portID, IX_ETH_DB_ACCEPT_ALL_FRAMES); + } + + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBIngressVlanTaggingEnabledSet(portID, IX_ETH_DB_PASS_THROUGH); + } + + /* clear membership and TTI tables */ + memset (vlanSet, 0, sizeof (vlanSet)); + + if (status == IX_ETH_DB_SUCCESS) + { + /* use the internal function to bypass PVID check */ + status = ixEthDBPortVlanTableSet(portID, portInfo->vlanMembership, vlanSet); + } + + if (status == IX_ETH_DB_SUCCESS) + { + /* use the internal function to bypass PVID check */ + status = ixEthDBPortVlanTableSet(portID, portInfo->transmitTaggingInfo, vlanSet); + } + + /* reset the PVID */ + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBPortVlanTagSet(portID, 0); + } + + /* disable TPID port extraction */ + if (status == IX_ETH_DB_SUCCESS) + { + status = ixEthDBVlanPortExtractionEnable(portID, FALSE); + } + } +#endif + + if (status == IX_ETH_DB_SUCCESS) + { + /* checks passed, disable */ + portInfo->featureStatus &= ~feature; + } + } + + /* restore port enabled state */ + portInfo->enabled = portEnabled; + + return status; +} + +/** + * @brief returns the status of a feature + * + * @param portID port ID + * @param present location to store a boolean value indicating + * if the feature is present (TRUE) or not (FALSE) + * @param enabled location to store a booleam value indicating + * if the feature is present (TRUE) or not (FALSE) + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled) +{ + PortInfo *portInfo; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_REFERENCE(present); + + IX_ETH_DB_CHECK_REFERENCE(enabled); + + portInfo = &ixEthDBPortInfo[portID]; + + *present = (portInfo->featureCapability & feature) != 0; + *enabled = (portInfo->featureStatus & feature) != 0; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief returns the value of an EthDB property + * + * @param portID ID of the port + * @param feature feature owning the property + * @param property ID of the property + * @param type location to store the property type into + * @param value location to store the property value into + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value) +{ + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + IX_ETH_DB_CHECK_REFERENCE(type); + + IX_ETH_DB_CHECK_REFERENCE(value); + + if (feature == IX_ETH_DB_VLAN_QOS) + { + if (property == IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY) + { + * (UINT32 *) value = ixEthDBPortInfo[portID].ixEthDBTrafficClassCount; + *type = IX_ETH_DB_INTEGER_PROPERTY; + + return IX_ETH_DB_SUCCESS; + } + else if (property >= IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY + && property <= IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY) + { + UINT32 classDelta = property - IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY; + + if (classDelta >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) + { + return IX_ETH_DB_FAIL; + } + + * (UINT32 *) value = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[classDelta]; + *type = IX_ETH_DB_INTEGER_PROPERTY; + + return IX_ETH_DB_SUCCESS; + } + } + + return IX_ETH_DB_INVALID_ARG; +} + +/** + * @brief sets the value of an EthDB property + * + * @param portID ID of the port + * @param feature feature owning the property + * @param property ID of the property + * @param value location containing the property value + * + * This function implements a private property intended + * only for EthAcc usage. Upon setting the IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE + * property (the value is ignored), the availability of traffic classes is + * frozen to whatever traffic class structure is currently in use. + * This means that if VLAN_QOS has been enabled before EthAcc + * initialization then all the defined traffic classes will be available; + * otherwise only one traffic class (0) will be available. + * + * Note that this function is documented in the main component + * header file, IxEthDB.h as not accepting any parameters. The + * current implementation is only intended for the private use of EthAcc. + * + * Also note that once this function is called the effect is irreversible, + * unless EthDB is complete unloaded and re-initialized. + * + * @return IX_ETH_DB_INVALID_ARG (no read-write properties are + * supported in this release) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value) +{ + IX_ETH_DB_CHECK_PORT_EXISTS(portID); + + if ((feature == IX_ETH_DB_VLAN_QOS) && (property == IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE)) + { + ixEthDBPortInfo[portID].ixEthDBTrafficClassAvailable = ixEthDBPortInfo[portID].ixEthDBTrafficClassCount; + + return IX_ETH_DB_SUCCESS; + } + + return IX_ETH_DB_INVALID_ARG; +} diff --git a/drivers/net/npe/IxEthDBFirewall.c b/drivers/net/npe/IxEthDBFirewall.c new file mode 100644 index 0000000000..eb46174b6c --- /dev/null +++ b/drivers/net/npe/IxEthDBFirewall.c @@ -0,0 +1,266 @@ +/** + * @file IxEthDBFirewall.c + * + * @brief Implementation of the firewall API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#include "IxEthDB_p.h" + +/** + * @brief updates the NPE firewall operating mode and + * firewall address table + * + * @param portID ID of the port + * @param epDelta initial entry point for binary searches (NPE optimization) + * @param address address of the firewall MAC address table + * + * This function will send a message to the NPE configuring the + * firewall mode (white list or black list), invalid source + * address filtering and downloading a new MAC address database + * to be used for firewall matching. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or IX_ETH_DB_FAIL otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta) +{ + IxNpeMhMessage message; + IX_STATUS result; + + UINT32 mode = 0; + PortInfo *portInfo = &ixEthDBPortInfo[portID]; + + mode = (portInfo->srcAddressFilterEnabled != FALSE) << 1 | (portInfo->firewallMode == IX_ETH_DB_FIREWALL_WHITE_LIST); + + FILL_SETFIREWALLMODE_MSG(message, + IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), + epDelta, + mode, + IX_OSAL_MMU_VIRT_TO_PHYS(address)); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief configures the firewall white list/black list + * access mode + * + * @param portID ID of the port + * @param mode firewall filtering mode (IX_ETH_DB_FIREWALL_WHITE_LIST + * or IX_ETH_DB_FIREWALL_BLACK_LIST) + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); + + if (mode != IX_ETH_DB_FIREWALL_WHITE_LIST + && mode != IX_ETH_DB_FIREWALL_BLACK_LIST) + { + return IX_ETH_DB_INVALID_ARG; + } + + ixEthDBPortInfo[portID].firewallMode = mode; + + return ixEthDBFirewallTableDownload(portID); +} + +/** + * @brief enables or disables the invalid source MAC address filter + * + * @param portID ID of the port + * @param enable TRUE to enable invalid source MAC address filtering + * or FALSE to disable it + * + * The invalid source MAC address filter will discard, when enabled, + * frames whose source MAC address is a multicast or the broadcast MAC + * address. + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); + + ixEthDBPortInfo[portID].srcAddressFilterEnabled = enable; + + return ixEthDBFirewallTableDownload(portID); +} + +/** + * @brief adds a firewall record + * + * @param portID ID of the port + * @param macAddr MAC address of the new record + * + * This function will add a new firewall record + * on the specified port, using the specified + * MAC address. If the record already exists this + * function will silently return IX_ETH_DB_SUCCESS, + * although no duplicate records are added. + * + * Note that this function is documented in the main + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + MacDescriptor recordTemplate; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); + + memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); + + recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD; + recordTemplate.portID = portID; + + return ixEthDBAdd(&recordTemplate, NULL); +} + +/** + * @brief removes a firewall record + * + * @param portID ID of the port + * @param macAddr MAC address of the record to remove + * + * This function will attempt to remove a firewall + * record from the given port, using the specified + * MAC address. + * + * Note that this function is documented in the main + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully of an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + MacDescriptor recordTemplate; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); + + memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); + + recordTemplate.type = IX_ETH_DB_FIREWALL_RECORD; + recordTemplate.portID = portID; + + return ixEthDBRemove(&recordTemplate, NULL); +} + +/** + * @brief downloads the firewall address table to an NPE + * + * @param portID ID of the port + * + * This function will download the firewall address table to + * an NPE port. + * + * Note that this function is documented in the main + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or IX_ETH_DB_FAIL otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID) +{ + IxEthDBPortMap query; + IxEthDBStatus result; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_FIREWALL); + + SET_DEPENDENCY_MAP(query, portID); + + ixEthDBUpdateLock(); + + ixEthDBPortInfo[portID].updateMethod.searchTree = ixEthDBQuery(NULL, query, IX_ETH_DB_FIREWALL_RECORD, MAX_FW_SIZE); + + result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_FIREWALL_RECORD); + + ixEthDBUpdateUnlock(); + + return result; +} diff --git a/drivers/net/npe/IxEthDBHashtable.c b/drivers/net/npe/IxEthDBHashtable.c new file mode 100644 index 0000000000..f1b18e6b48 --- /dev/null +++ b/drivers/net/npe/IxEthDBHashtable.c @@ -0,0 +1,642 @@ +/** + * @file ethHash.c + * + * @brief Hashtable implementation + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#include "IxEthDB_p.h" +#include "IxEthDBLocks_p.h" + +/** + * @addtogroup EthDB + * + * @{ + */ + +/** + * @brief initializes a hash table object + * + * @param hashTable uninitialized hash table structure + * @param numBuckets number of buckets to use + * @param entryHashFunction hash function used + * to hash entire hash node data block (for adding) + * @param matchFunctions array of match functions, indexed on type, + * used to differentiate records with the same hash value + * @param freeFunction function used to free node data blocks + * + * Initializes the given hash table object. + * + * @internal + */ +void ixEthDBInitHash(HashTable *hashTable, + UINT32 numBuckets, + HashFunction entryHashFunction, + MatchFunction *matchFunctions, + FreeFunction freeFunction) +{ + UINT32 bucketIndex; + UINT32 hashSize = numBuckets * sizeof(HashNode *); + + /* entry hashing, matching and freeing methods */ + hashTable->entryHashFunction = entryHashFunction; + hashTable->matchFunctions = matchFunctions; + hashTable->freeFunction = freeFunction; + + /* buckets */ + hashTable->numBuckets = numBuckets; + + /* set to 0 all buckets */ + memset(hashTable->hashBuckets, 0, hashSize); + + /* init bucket locks - note that initially all mutexes are unlocked after MutexInit()*/ + for (bucketIndex = 0 ; bucketIndex < numBuckets ; bucketIndex++) + { + ixOsalFastMutexInit(&hashTable->bucketLocks[bucketIndex]); + } +} + +/** + * @brief adds an entry to the hash table + * + * @param hashTable hash table to add the entry to + * @param entry entry to add + * + * The entry will be hashed using the entry hashing function and added to the + * hash table, unless a locking blockage occurs, in which case the caller + * should retry. + * + * @retval IX_ETH_DB_SUCCESS if adding <i>entry</i> has succeeded + * @retval IX_ETH_DB_NOMEM if there's no memory left in the hash node pool + * @retval IX_ETH_DB_BUSY if there's a locking failure on the insertion path + * + * @internal + */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAddHashEntry(HashTable *hashTable, void *entry) +{ + UINT32 hashValue = hashTable->entryHashFunction(entry); + UINT32 bucketIndex = hashValue % hashTable->numBuckets; + HashNode *bucket = hashTable->hashBuckets[bucketIndex]; + HashNode *newNode; + + LockStack locks; + + INIT_STACK(&locks); + + /* lock bucket */ + PUSH_LOCK(&locks, &hashTable->bucketLocks[bucketIndex]); + + /* lock insertion element (first in chain), if any */ + if (bucket != NULL) + { + PUSH_LOCK(&locks, &bucket->lock); + } + + /* get new node */ + newNode = ixEthDBAllocHashNode(); + + if (newNode == NULL) + { + /* unlock everything */ + UNROLL_STACK(&locks); + + return IX_ETH_DB_NOMEM; + } + + /* init lock - note that mutexes are unlocked after MutexInit */ + ixOsalFastMutexInit(&newNode->lock); + + /* populate new link */ + newNode->data = entry; + + /* add to bucket */ + newNode->next = bucket; + hashTable->hashBuckets[bucketIndex] = newNode; + + /* unlock bucket and insertion point */ + UNROLL_STACK(&locks); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief removes an entry from the hashtable + * + * @param hashTable hash table to remove entry from + * @param keyType type of record key used for matching + * @param reference reference key used to identify the entry + * + * The reference key will be hashed using the key hashing function, + * the entry is searched using the hashed value and then examined + * against the reference entry using the match function. A positive + * match will trigger the deletion of the entry. + * Locking failures are reported and the caller should retry. + * + * @retval IX_ETH_DB_SUCCESS if the removal was successful + * @retval IX_ETH_DB_NO_SUCH_ADDR if the entry was not found + * @retval IX_ETH_DB_BUSY if a locking failure occured during the process + * + * @internal + */ +IxEthDBStatus ixEthDBRemoveHashEntry(HashTable *hashTable, int keyType, void *reference) +{ + UINT32 hashValue = hashTable->entryHashFunction(reference); + UINT32 bucketIndex = hashValue % hashTable->numBuckets; + HashNode *node = hashTable->hashBuckets[bucketIndex]; + HashNode *previousNode = NULL; + + LockStack locks; + + INIT_STACK(&locks); + + while (node != NULL) + { + /* try to lock node */ + PUSH_LOCK(&locks, &node->lock); + + if (hashTable->matchFunctions[keyType](reference, node->data)) + { + /* found entry */ + if (node->next != NULL) + { + PUSH_LOCK(&locks, &node->next->lock); + } + + if (previousNode == NULL) + { + /* node is head of chain */ + PUSH_LOCK(&locks, &hashTable->bucketLocks[bucketIndex]); + + hashTable->hashBuckets[bucketIndex] = node->next; + + POP_LOCK(&locks); + } + else + { + /* relink */ + previousNode->next = node->next; + } + + UNROLL_STACK(&locks); + + /* free node */ + hashTable->freeFunction(node->data); + ixEthDBFreeHashNode(node); + + return IX_ETH_DB_SUCCESS; + } + else + { + if (previousNode != NULL) + { + /* unlock previous node */ + SHIFT_STACK(&locks); + } + + /* advance to next element in chain */ + previousNode = node; + node = node->next; + } + } + + UNROLL_STACK(&locks); + + /* not found */ + return IX_ETH_DB_NO_SUCH_ADDR; +} + +/** + * @brief retrieves an entry from the hash table + * + * @param hashTable hash table to perform the search into + * @param reference search key (a MAC address) + * @param keyType type of record key used for matching + * @param searchResult pointer where a reference to the located hash node + * is placed + * + * Searches the entry with the same key as <i>reference</i> and places the + * pointer to the resulting node in <i>searchResult</i>. + * An implicit write access lock is granted after a search, which gives the + * caller the opportunity to modify the entry. + * Access should be released as soon as possible using @ref ixEthDBReleaseHashNode(). + * + * @see ixEthDBReleaseHashNode() + * + * @retval IX_ETH_DB_SUCCESS if the search was completed successfully + * @retval IX_ETH_DB_NO_SUCH_ADDRESS if no entry with the given key was found + * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case + * the caller should retry + * + * @warning unless the return value is <b>IX_ETH_DB_SUCCESS</b> the searchResult + * location is NOT modified and therefore using a NULL comparison test when the + * value was not properly initialized would be an error + * + * @internal + */ +IxEthDBStatus ixEthDBSearchHashEntry(HashTable *hashTable, int keyType, void *reference, HashNode **searchResult) +{ + UINT32 hashValue; + HashNode *node; + + hashValue = hashTable->entryHashFunction(reference); + node = hashTable->hashBuckets[hashValue % hashTable->numBuckets]; + + while (node != NULL) + { + TRY_LOCK(&node->lock); + + if (hashTable->matchFunctions[keyType](reference, node->data)) + { + *searchResult = node; + + return IX_ETH_DB_SUCCESS; + } + else + { + UNLOCK(&node->lock); + + node = node->next; + } + } + + /* not found */ + return IX_ETH_DB_NO_SUCH_ADDR; +} + +/** + * @brief reports the existence of an entry in the hash table + * + * @param hashTable hash table to perform the search into + * @param reference search key (a MAC address) + * @param keyType type of record key used for matching + * + * Searches the entry with the same key as <i>reference</i>. + * No implicit write access lock is granted after a search, hence the + * caller cannot access or modify the entry. The result is only temporary. + * + * @see ixEthDBReleaseHashNode() + * + * @retval IX_ETH_DB_SUCCESS if the search was completed successfully + * @retval IX_ETH_DB_NO_SUCH_ADDRESS if no entry with the given key was found + * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case + * the caller should retry + * + * @internal + */ +IxEthDBStatus ixEthDBPeekHashEntry(HashTable *hashTable, int keyType, void *reference) +{ + UINT32 hashValue; + HashNode *node; + + hashValue = hashTable->entryHashFunction(reference); + node = hashTable->hashBuckets[hashValue % hashTable->numBuckets]; + + while (node != NULL) + { + TRY_LOCK(&node->lock); + + if (hashTable->matchFunctions[keyType](reference, node->data)) + { + UNLOCK(&node->lock); + + return IX_ETH_DB_SUCCESS; + } + else + { + UNLOCK(&node->lock); + + node = node->next; + } + } + + /* not found */ + return IX_ETH_DB_NO_SUCH_ADDR; +} + +/** + * @brief releases the write access lock + * + * @pre the node should have been obtained via @ref ixEthDBSearchHashEntry() + * + * @see ixEthDBSearchHashEntry() + * + * @internal + */ +void ixEthDBReleaseHashNode(HashNode *node) +{ + UNLOCK(&node->lock); +} + +/** + * @brief initializes a hash iterator + * + * @param hashTable hash table to be iterated + * @param iterator iterator object + * + * If the initialization is successful the iterator will point to the + * first hash table record (if any). + * Testing if the iterator has not passed the end of the table should be + * done using the IS_ITERATOR_VALID(iteratorPtr) macro. + * An implicit write access lock is granted on the entry pointed by the iterator. + * The access is automatically revoked when the iterator is incremented. + * If the caller decides to terminate the iteration before the end of the table is + * passed then the manual access release method, @ref ixEthDBReleaseHashIterator, + * must be called. + * + * @see ixEthDBReleaseHashIterator() + * + * @retval IX_ETH_DB_SUCCESS if initialization was successful and the iterator points + * to the first valid table node + * @retval IX_ETH_DB_FAIL if the table is empty + * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller + * should retry + * + * @warning do not use ixEthDBReleaseHashNode() on entries pointed by the iterator, as this + * might place the database in a permanent invalid lock state + * + * @internal + */ +IxEthDBStatus ixEthDBInitHashIterator(HashTable *hashTable, HashIterator *iterator) +{ + iterator->bucketIndex = 0; + iterator->node = NULL; + iterator->previousNode = NULL; + + return ixEthDBIncrementHashIterator(hashTable, iterator); +} + +/** + * @brief releases the write access locks of the iterator nodes + * + * @warning use of this function is required only when the caller terminates an iteration + * before reaching the end of the table + * + * @see ixEthDBInitHashIterator() + * @see ixEthDBIncrementHashIterator() + * + * @param iterator iterator whose node(s) should be unlocked + * + * @internal + */ +void ixEthDBReleaseHashIterator(HashIterator *iterator) +{ + if (iterator->previousNode != NULL) + { + UNLOCK(&iterator->previousNode->lock); + } + + if (iterator->node != NULL) + { + UNLOCK(&iterator->node->lock); + } +} + +/** + * @brief incremenents an iterator so that it points to the next valid entry of the table + * (if any) + * + * @param hashTable hash table to iterate + * @param iterator iterator object + * + * @pre the iterator object must be initialized using @ref ixEthDBInitHashIterator() + * + * If the increment operation is successful the iterator will point to the + * next hash table record (if any). + * Testing if the iterator has not passed the end of the table should be + * done using the IS_ITERATOR_VALID(iteratorPtr) macro. + * An implicit write access lock is granted on the entry pointed by the iterator. + * The access is automatically revoked when the iterator is re-incremented. + * If the caller decides to terminate the iteration before the end of the table is + * passed then the manual access release method, @ref ixEthDBReleaseHashIterator, + * must be called. + * Is is guaranteed that no other thread can remove or change the iterated entry until + * the iterator is incremented successfully. + * + * @see ixEthDBReleaseHashIterator() + * + * @retval IX_ETH_DB_SUCCESS if the operation was successful and the iterator points + * to the next valid table node + * @retval IX_ETH_DB_FAIL if the iterator has passed the end of the table + * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller + * should retry + * + * @warning do not use ixEthDBReleaseHashNode() on entries pointed by the iterator, as this + * might place the database in a permanent invalid lock state + * + * @internal + */ +IxEthDBStatus ixEthDBIncrementHashIterator(HashTable *hashTable, HashIterator *iterator) +{ + /* unless iterator is just initialized... */ + if (iterator->node != NULL) + { + /* try next in chain */ + if (iterator->node->next != NULL) + { + TRY_LOCK(&iterator->node->next->lock); + + if (iterator->previousNode != NULL) + { + UNLOCK(&iterator->previousNode->lock); + } + + iterator->previousNode = iterator->node; + iterator->node = iterator->node->next; + + return IX_ETH_DB_SUCCESS; + } + else + { + /* last in chain, prepare for next bucket */ + iterator->bucketIndex++; + } + } + + /* try next used bucket */ + for (; iterator->bucketIndex < hashTable->numBuckets ; iterator->bucketIndex++) + { + HashNode **nodePtr = &(hashTable->hashBuckets[iterator->bucketIndex]); + HashNode *node = *nodePtr; +#if (CPU!=SIMSPARCSOLARIS) && !defined (__wince) + if (((iterator->bucketIndex & IX_ETHDB_BUCKET_INDEX_MASK) == 0) && + (iterator->bucketIndex < (hashTable->numBuckets - IX_ETHDB_BUCKETPTR_AHEAD))) + { + /* preload next cache line (2 cache line ahead) */ + nodePtr += IX_ETHDB_BUCKETPTR_AHEAD; + __asm__ ("pld [%0];\n": : "r" (nodePtr)); + } +#endif + if (node != NULL) + { + TRY_LOCK(&node->lock); + + /* unlock last one or two nodes in the previous chain */ + if (iterator->node != NULL) + { + UNLOCK(&iterator->node->lock); + + if (iterator->previousNode != NULL) + { + UNLOCK(&iterator->previousNode->lock); + } + } + + /* redirect iterator */ + iterator->previousNode = NULL; + iterator->node = node; + + return IX_ETH_DB_SUCCESS; + } + } + + /* could not advance iterator */ + if (iterator->node != NULL) + { + UNLOCK(&iterator->node->lock); + + if (iterator->previousNode != NULL) + { + UNLOCK(&iterator->previousNode->lock); + } + + iterator->node = NULL; + } + + return IX_ETH_DB_END; +} + +/** + * @brief removes an entry pointed by an iterator + * + * @param hashTable iterated hash table + * @param iterator iterator object + * + * Removes the entry currently pointed by the iterator and repositions the iterator + * on the next valid entry (if any). Handles locking issues automatically and + * implicitely grants write access lock to the new pointed entry. + * Failures due to concurrent threads having write access locks in the same region + * preserve the state of the database and the iterator object, leaving the caller + * free to retry without loss of access. It is guaranteed that only the thread owning + * the iterator can remove the object pointed by the iterator. + * + * @retval IX_ETH_DB_SUCCESS if removal has succeeded + * @retval IX_ETH_DB_BUSY if a locking failure has occured, in which case the caller + * should retry + * + * @internal + */ +IxEthDBStatus ixEthDBRemoveEntryAtHashIterator(HashTable *hashTable, HashIterator *iterator) +{ + HashIterator nextIteratorPos; + LockStack locks; + + INIT_STACK(&locks); + + /* set initial bucket index for next position */ + nextIteratorPos.bucketIndex = iterator->bucketIndex; + + /* compute iterator position before removing anything and lock ahead */ + if (iterator->node->next != NULL) + { + PUSH_LOCK(&locks, &iterator->node->next->lock); + + /* reposition on the next node in the chain */ + nextIteratorPos.node = iterator->node->next; + nextIteratorPos.previousNode = iterator->previousNode; + } + else + { + /* try next chain - don't know yet if we'll find anything */ + nextIteratorPos.node = NULL; + + /* if we find something it's a chain head */ + nextIteratorPos.previousNode = NULL; + + /* browse up in the buckets to find a non-null chain */ + while (++nextIteratorPos.bucketIndex < hashTable->numBuckets) + { + nextIteratorPos.node = hashTable->hashBuckets[nextIteratorPos.bucketIndex]; + + if (nextIteratorPos.node != NULL) + { + /* found a non-empty chain, try to lock head */ + PUSH_LOCK(&locks, &nextIteratorPos.node->lock); + + break; + } + } + } + + /* restore links over the to-be-deleted item */ + if (iterator->previousNode == NULL) + { + /* first in chain, lock bucket */ + PUSH_LOCK(&locks, &hashTable->bucketLocks[iterator->bucketIndex]); + + hashTable->hashBuckets[iterator->bucketIndex] = iterator->node->next; + + POP_LOCK(&locks); + } + else + { + /* relink */ + iterator->previousNode->next = iterator->node->next; + + /* unlock last remaining node in current chain when moving between chains */ + if (iterator->node->next == NULL) + { + UNLOCK(&iterator->previousNode->lock); + } + } + + /* delete entry */ + hashTable->freeFunction(iterator->node->data); + ixEthDBFreeHashNode(iterator->node); + + /* reposition iterator */ + *iterator = nextIteratorPos; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @} + */ diff --git a/drivers/net/npe/IxEthDBLearning.c b/drivers/net/npe/IxEthDBLearning.c new file mode 100644 index 0000000000..2287dbe96c --- /dev/null +++ b/drivers/net/npe/IxEthDBLearning.c @@ -0,0 +1,149 @@ +/** + * @file IxEthDBLearning.c + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" + +/** + * @brief hashes the mac address in a mac descriptor with a XOR function + * + * @param entry pointer to a mac descriptor to be hashed + * + * This function only extracts the mac address and employs ixEthDBKeyXORHash() + * to do the actual hashing. + * Used only to add a whole entry to a hash table, as opposed to searching which + * takes only a key and uses the key hashing directly. + * + * @see ixEthDBKeyXORHash() + * + * @return the hash value + * + * @internal + */ +UINT32 ixEthDBEntryXORHash(void *entry) +{ + MacDescriptor *descriptor = (MacDescriptor *) entry; + + return ixEthDBKeyXORHash(descriptor->macAddress); +} + +/** + * @brief hashes a mac address + * + * @param key pointer to a 6 byte structure (typically an IxEthDBMacAddr pointer) + * to be hashed + * + * Given a 6 bytes MAC address, the hash used is: + * + * hash(MAC[0:5]) = MAC[0:1] ^ MAC[2:3] ^ MAC[4:5] + * + * Used by the hash table to search and remove entries based + * solely on their keys (mac addresses). + * + * @return the hash value + * + * @internal + */ +UINT32 ixEthDBKeyXORHash(void *key) +{ + UINT32 hashValue; + UINT8 *value = (UINT8 *) key; + + hashValue = (value[5] << 8) | value[4]; + hashValue ^= (value[3] << 8) | value[2]; + hashValue ^= (value[1] << 8) | value[0]; + + return hashValue; +} + +/** + * @brief mac descriptor match function + * + * @param reference mac address (typically an IxEthDBMacAddr pointer) structure + * @param entry pointer to a mac descriptor whose key (mac address) is to be + * matched against the reference key + * + * Used by the hash table to retrieve entries. Hashing entries can produce + * collisions, i.e. descriptors with different mac addresses and the same + * hash value, where this function is used to differentiate entries. + * + * @retval TRUE if the entry matches the reference key (equal addresses) + * @retval FALSE if the entry does not match the reference key + * + * @internal + */ +BOOL ixEthDBAddressMatch(void *reference, void *entry) +{ + return (ixEthDBAddressCompare(reference, ((MacDescriptor *) entry)->macAddress) == 0); +} + +/** + * @brief compares two mac addresses + * + * @param mac1 first mac address to compare + * @param mac2 second mac address to compare + * + * This comparison works in a similar way to strcmp, producing similar results. + * Used to insert values keyed on mac addresses into binary search trees. + * + * @retval -1 if mac1 < mac2 + * @retval 0 if ma1 == mac2 + * @retval 1 if mac1 > mac2 + */ +UINT32 ixEthDBAddressCompare(UINT8 *mac1, UINT8 *mac2) +{ + UINT32 local_index; + + for (local_index = 0 ; local_index < IX_IEEE803_MAC_ADDRESS_SIZE ; local_index++) + { + if (mac1[local_index] > mac2[local_index]) + { + return 1; + } + else if (mac1[local_index] < mac2[local_index]) + { + return -1; + } + } + + return 0; +} + diff --git a/drivers/net/npe/IxEthDBMem.c b/drivers/net/npe/IxEthDBMem.c new file mode 100644 index 0000000000..133cbef8d6 --- /dev/null +++ b/drivers/net/npe/IxEthDBMem.c @@ -0,0 +1,649 @@ +/** + * @file IxEthDBDBMem.c + * + * @brief Memory handling routines for the MAC address database + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#include "IxEthDB_p.h" + +IX_ETH_DB_PRIVATE HashNode *nodePool = NULL; +IX_ETH_DB_PRIVATE MacDescriptor *macPool = NULL; +IX_ETH_DB_PRIVATE MacTreeNode *treePool = NULL; + +IX_ETH_DB_PRIVATE HashNode nodePoolArea[NODE_POOL_SIZE]; +IX_ETH_DB_PRIVATE MacDescriptor macPoolArea[MAC_POOL_SIZE]; +IX_ETH_DB_PRIVATE MacTreeNode treePoolArea[TREE_POOL_SIZE]; + +IX_ETH_DB_PRIVATE IxOsalMutex nodePoolLock; +IX_ETH_DB_PRIVATE IxOsalMutex macPoolLock; +IX_ETH_DB_PRIVATE IxOsalMutex treePoolLock; + +#define LOCK_NODE_POOL { ixOsalMutexLock(&nodePoolLock, IX_OSAL_WAIT_FOREVER); } +#define UNLOCK_NODE_POOL { ixOsalMutexUnlock(&nodePoolLock); } + +#define LOCK_MAC_POOL { ixOsalMutexLock(&macPoolLock, IX_OSAL_WAIT_FOREVER); } +#define UNLOCK_MAC_POOL { ixOsalMutexUnlock(&macPoolLock); } + +#define LOCK_TREE_POOL { ixOsalMutexLock(&treePoolLock, IX_OSAL_WAIT_FOREVER); } +#define UNLOCK_TREE_POOL { ixOsalMutexUnlock(&treePoolLock); } + +/* private function prototypes */ +IX_ETH_DB_PRIVATE MacDescriptor* ixEthDBPoolAllocMacDescriptor(void); +IX_ETH_DB_PRIVATE void ixEthDBPoolFreeMacDescriptor(MacDescriptor *macDescriptor); + +/** + * @addtogroup EthMemoryManagement + * + * @{ + */ + +/** + * @brief initializes the memory pools used by the ethernet database component + * + * Initializes the hash table node, mac descriptor and mac tree node pools. + * Called at initialization time by @ref ixEthDBInit(). + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBInitMemoryPools(void) +{ + int local_index; + + /* HashNode pool */ + ixOsalMutexInit(&nodePoolLock); + + for (local_index = 0 ; local_index < NODE_POOL_SIZE ; local_index++) + { + HashNode *freeNode = &nodePoolArea[local_index]; + + freeNode->nextFree = nodePool; + nodePool = freeNode; + } + + /* MacDescriptor pool */ + ixOsalMutexInit(&macPoolLock); + + for (local_index = 0 ; local_index < MAC_POOL_SIZE ; local_index++) + { + MacDescriptor *freeDescriptor = &macPoolArea[local_index]; + + freeDescriptor->nextFree = macPool; + macPool = freeDescriptor; + } + + /* MacTreeNode pool */ + ixOsalMutexInit(&treePoolLock); + + for (local_index = 0 ; local_index < TREE_POOL_SIZE ; local_index++) + { + MacTreeNode *freeNode = &treePoolArea[local_index]; + + freeNode->nextFree = treePool; + treePool = freeNode; + } +} + +/** + * @brief allocates a hash node from the pool + * + * Allocates a hash node and resets its value. + * + * @return the allocated hash node or NULL if the pool is empty + * + * @internal + */ +IX_ETH_DB_PUBLIC +HashNode* ixEthDBAllocHashNode(void) +{ + HashNode *allocatedNode = NULL; + + if (nodePool != NULL) + { + LOCK_NODE_POOL; + + allocatedNode = nodePool; + nodePool = nodePool->nextFree; + + UNLOCK_NODE_POOL; + + memset(allocatedNode, 0, sizeof(HashNode)); + } + + return allocatedNode; +} + +/** + * @brief frees a hash node into the pool + * + * @param hashNode node to be freed + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBFreeHashNode(HashNode *hashNode) +{ + if (hashNode != NULL) + { + LOCK_NODE_POOL; + + hashNode->nextFree = nodePool; + nodePool = hashNode; + + UNLOCK_NODE_POOL; + } +} + +/** + * @brief allocates a mac descriptor from the pool + * + * Allocates a mac descriptor and resets its value. + * This function is not used directly, instead @ref ixEthDBAllocMacDescriptor() + * is used, which keeps track of the pointer reference count. + * + * @see ixEthDBAllocMacDescriptor() + * + * @warning this function is not used directly by any other function + * apart from ixEthDBAllocMacDescriptor() + * + * @return the allocated mac descriptor or NULL if the pool is empty + * + * @internal + */ +IX_ETH_DB_PRIVATE +MacDescriptor* ixEthDBPoolAllocMacDescriptor(void) +{ + MacDescriptor *allocatedDescriptor = NULL; + + if (macPool != NULL) + { + LOCK_MAC_POOL; + + allocatedDescriptor = macPool; + macPool = macPool->nextFree; + + UNLOCK_MAC_POOL; + + memset(allocatedDescriptor, 0, sizeof(MacDescriptor)); + } + + return allocatedDescriptor; +} + +/** + * @brief allocates and initializes a mac descriptor smart pointer + * + * Uses @ref ixEthDBPoolAllocMacDescriptor() to allocate a mac descriptor + * from the pool and initializes its reference count. + * + * @see ixEthDBPoolAllocMacDescriptor() + * + * @return the allocated mac descriptor or NULL if the pool is empty + * + * @internal + */ +IX_ETH_DB_PUBLIC +MacDescriptor* ixEthDBAllocMacDescriptor(void) +{ + MacDescriptor *allocatedDescriptor = ixEthDBPoolAllocMacDescriptor(); + + if (allocatedDescriptor != NULL) + { + LOCK_MAC_POOL; + + allocatedDescriptor->refCount++; + + UNLOCK_MAC_POOL; + } + + return allocatedDescriptor; +} + +/** + * @brief frees a mac descriptor back into the pool + * + * @param macDescriptor mac descriptor to be freed + * + * @warning this function is not to be called by anyone but + * ixEthDBFreeMacDescriptor() + * + * @see ixEthDBFreeMacDescriptor() + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBPoolFreeMacDescriptor(MacDescriptor *macDescriptor) +{ + LOCK_MAC_POOL; + + macDescriptor->nextFree = macPool; + macPool = macDescriptor; + + UNLOCK_MAC_POOL; +} + +/** + * @brief frees or reduces the usage count of a mac descriptor smart pointer + * + * If the reference count reaches 0 (structure is no longer used anywhere) + * then the descriptor is freed back into the pool using ixEthDBPoolFreeMacDescriptor(). + * + * @see ixEthDBPoolFreeMacDescriptor() + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBFreeMacDescriptor(MacDescriptor *macDescriptor) +{ + if (macDescriptor != NULL) + { + LOCK_MAC_POOL; + + if (macDescriptor->refCount > 0) + { + macDescriptor->refCount--; + + if (macDescriptor->refCount == 0) + { + UNLOCK_MAC_POOL; + + ixEthDBPoolFreeMacDescriptor(macDescriptor); + } + else + { + UNLOCK_MAC_POOL; + } + } + else + { + UNLOCK_MAC_POOL; + } + } +} + +/** + * @brief clones a mac descriptor smart pointer + * + * @param macDescriptor mac descriptor to clone + * + * Increments the usage count of the smart pointer + * + * @returns the cloned smart pointer + * + * @internal + */ +IX_ETH_DB_PUBLIC +MacDescriptor* ixEthDBCloneMacDescriptor(MacDescriptor *macDescriptor) +{ + LOCK_MAC_POOL; + + if (macDescriptor->refCount == 0) + { + UNLOCK_MAC_POOL; + + return NULL; + } + + macDescriptor->refCount++; + + UNLOCK_MAC_POOL; + + return macDescriptor; +} + +/** + * @brief allocates a mac tree node from the pool + * + * Allocates and initializes a mac tree node from the pool. + * + * @return the allocated mac tree node or NULL if the pool is empty + * + * @internal + */ +IX_ETH_DB_PUBLIC +MacTreeNode* ixEthDBAllocMacTreeNode(void) +{ + MacTreeNode *allocatedNode = NULL; + + if (treePool != NULL) + { + LOCK_TREE_POOL; + + allocatedNode = treePool; + treePool = treePool->nextFree; + + UNLOCK_TREE_POOL; + + memset(allocatedNode, 0, sizeof(MacTreeNode)); + } + + return allocatedNode; +} + +/** + * @brief frees a mac tree node back into the pool + * + * @param macNode mac tree node to be freed + * + * @warning not to be used except from ixEthDBFreeMacTreeNode(). + * + * @see ixEthDBFreeMacTreeNode() + * + * @internal + */ +void ixEthDBPoolFreeMacTreeNode(MacTreeNode *macNode) +{ + if (macNode != NULL) + { + LOCK_TREE_POOL; + + macNode->nextFree = treePool; + treePool = macNode; + + UNLOCK_TREE_POOL; + } +} + +/** + * @brief frees or reduces the usage count of a mac tree node smart pointer + * + * @param macNode mac tree node to free + * + * Reduces the usage count of the given mac node. If the usage count + * reaches 0 the node is freed back into the pool using ixEthDBPoolFreeMacTreeNode() + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBFreeMacTreeNode(MacTreeNode *macNode) +{ + if (macNode->descriptor != NULL) + { + ixEthDBFreeMacDescriptor(macNode->descriptor); + } + + if (macNode->left != NULL) + { + ixEthDBFreeMacTreeNode(macNode->left); + } + + if (macNode->right != NULL) + { + ixEthDBFreeMacTreeNode(macNode->right); + } + + ixEthDBPoolFreeMacTreeNode(macNode); +} + +/** + * @brief clones a mac tree node + * + * @param macNode mac tree node to be cloned + * + * Increments the usage count of the node, <i>its associated descriptor + * and <b>recursively</b> of all its child nodes</i>. + * + * @warning this function is recursive and clones whole trees/subtrees, use only for + * root nodes + * + * @internal + */ +IX_ETH_DB_PUBLIC +MacTreeNode* ixEthDBCloneMacTreeNode(MacTreeNode *macNode) +{ + if (macNode != NULL) + { + MacTreeNode *clonedMacNode = ixEthDBAllocMacTreeNode(); + + if (clonedMacNode != NULL) + { + if (macNode->right != NULL) + { + clonedMacNode->right = ixEthDBCloneMacTreeNode(macNode->right); + } + + if (macNode->left != NULL) + { + clonedMacNode->left = ixEthDBCloneMacTreeNode(macNode->left); + } + + if (macNode->descriptor != NULL) + { + clonedMacNode->descriptor = ixEthDBCloneMacDescriptor(macNode->descriptor); + } + } + + return clonedMacNode; + } + else + { + return NULL; + } +} + +#ifndef NDEBUG +/* Debug statistical functions for memory usage */ + +extern HashTable dbHashtable; +int ixEthDBNumHashElements(void); + +int ixEthDBNumHashElements(void) +{ + UINT32 bucketIndex; + int numElements = 0; + HashTable *hashTable = &dbHashtable; + + for (bucketIndex = 0 ; bucketIndex < hashTable->numBuckets ; bucketIndex++) + { + if (hashTable->hashBuckets[bucketIndex] != NULL) + { + HashNode *node = hashTable->hashBuckets[bucketIndex]; + + while (node != NULL) + { + numElements++; + + node = node->next; + } + } + } + + return numElements; +} + +UINT32 ixEthDBSearchTreeUsageGet(MacTreeNode *tree) +{ + if (tree == NULL) + { + return 0; + } + else + { + return 1 /* this node */ + ixEthDBSearchTreeUsageGet(tree->left) + ixEthDBSearchTreeUsageGet(tree->right); + } +} + +int ixEthDBShowMemoryStatus(void) +{ + MacDescriptor *mac; + MacTreeNode *tree; + HashNode *node; + + int macCounter = 0; + int treeCounter = 0; + int nodeCounter = 0; + + int totalTreeUsage = 0; + int totalDescriptorUsage = 0; + int totalCloneDescriptorUsage = 0; + int totalNodeUsage = 0; + + UINT32 portIndex; + + LOCK_NODE_POOL; + LOCK_MAC_POOL; + LOCK_TREE_POOL; + + mac = macPool; + tree = treePool; + node = nodePool; + + while (mac != NULL) + { + macCounter++; + + mac = mac->nextFree; + + if (macCounter > MAC_POOL_SIZE) + { + break; + } + } + + while (tree != NULL) + { + treeCounter++; + + tree = tree->nextFree; + + if (treeCounter > TREE_POOL_SIZE) + { + break; + } + } + + while (node != NULL) + { + nodeCounter++; + + node = node->nextFree; + + if (nodeCounter > NODE_POOL_SIZE) + { + break; + } + } + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + int treeUsage = ixEthDBSearchTreeUsageGet(ixEthDBPortInfo[portIndex].updateMethod.searchTree); + + totalTreeUsage += treeUsage; + totalCloneDescriptorUsage += treeUsage; /* each tree node contains a descriptor */ + } + + totalNodeUsage = ixEthDBNumHashElements(); + totalDescriptorUsage += totalNodeUsage; /* each hash table entry contains a descriptor */ + + UNLOCK_NODE_POOL; + UNLOCK_MAC_POOL; + UNLOCK_TREE_POOL; + + printf("Ethernet database memory usage stats:\n\n"); + + if (macCounter <= MAC_POOL_SIZE) + { + printf("\tMAC descriptor pool : %d free out of %d entries (%d%%)\n", macCounter, MAC_POOL_SIZE, macCounter * 100 / MAC_POOL_SIZE); + } + else + { + printf("\tMAC descriptor pool : invalid state (ring within the pool), normally %d entries\n", MAC_POOL_SIZE); + } + + if (treeCounter <= TREE_POOL_SIZE) + { + printf("\tTree node pool : %d free out of %d entries (%d%%)\n", treeCounter, TREE_POOL_SIZE, treeCounter * 100 / TREE_POOL_SIZE); + } + else + { + printf("\tTREE descriptor pool : invalid state (ring within the pool), normally %d entries\n", TREE_POOL_SIZE); + } + + if (nodeCounter <= NODE_POOL_SIZE) + { + printf("\tHash node pool : %d free out of %d entries (%d%%)\n", nodeCounter, NODE_POOL_SIZE, nodeCounter * 100 / NODE_POOL_SIZE); + } + else + { + printf("\tNODE descriptor pool : invalid state (ring within the pool), normally %d entries\n", NODE_POOL_SIZE); + } + + printf("\n"); + printf("\tMAC descriptor usage : %d entries, %d cloned\n", totalDescriptorUsage, totalCloneDescriptorUsage); + printf("\tTree node usage : %d entries\n", totalTreeUsage); + printf("\tHash node usage : %d entries\n", totalNodeUsage); + printf("\n"); + + /* search for duplicate nodes in the mac pool */ + { + MacDescriptor *reference = macPool; + + while (reference != NULL) + { + MacDescriptor *comparison = reference->nextFree; + + while (comparison != NULL) + { + if (reference == comparison) + { + printf("Warning: reached a duplicate (%p), invalid MAC pool state\n", reference); + + return 1; + } + + comparison = comparison->nextFree; + } + + reference = reference->nextFree; + } + } + + printf("No duplicates found in the MAC pool (sanity check ok)\n"); + + return 0; +} + +#endif /* NDEBUG */ + +/** + * @} EthMemoryManagement + */ diff --git a/drivers/net/npe/IxEthDBNPEAdaptor.c b/drivers/net/npe/IxEthDBNPEAdaptor.c new file mode 100644 index 0000000000..112a46c998 --- /dev/null +++ b/drivers/net/npe/IxEthDBNPEAdaptor.c @@ -0,0 +1,719 @@ +/** + * @file IxEthDBDBNPEAdaptor.c + * + * @brief Routines that read and write learning/search trees in NPE-specific format + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" +#include "IxEthDBLog_p.h" + +/* forward prototype declarations */ +IX_ETH_DB_PUBLIC void ixEthDBELTShow(IxEthDBPortId portID); +IX_ETH_DB_PUBLIC void ixEthDBShowNpeMsgHistory(void); + +/* data */ +UINT8* ixEthDBNPEUpdateArea[IX_ETH_DB_NUMBER_OF_PORTS]; +UINT32 dumpEltSize; + +/* private data */ +IX_ETH_DB_PRIVATE IxEthDBNoteWriteFn ixEthDBNPENodeWrite[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1]; + +#define IX_ETH_DB_MAX_DELTA_ZONES (6) /* at most 6 EP Delta zones, according to NPE FS */ +IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDeltaOffset[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; +IX_ETH_DB_PRIVATE UINT32 ixEthDBEPDelta[IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1][IX_ETH_DB_MAX_DELTA_ZONES]; + +/** + * @brief allocates non-cached or contiguous NPE tree update areas for all the ports + * + * This function is called only once at initialization time from + * @ref ixEthDBInit(). + * + * @warning do not call manually + * + * @see ixEthDBInit() + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNPEUpdateAreasInit(void) +{ + UINT32 portIndex; + PortUpdateMethod *update; + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + update = &ixEthDBPortInfo[portIndex].updateMethod; + + if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) + { + update->npeUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_ELT_BYTE_SIZE); + update->npeGwUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_GW_BYTE_SIZE); + update->vlanUpdateZone = IX_OSAL_CACHE_DMA_MALLOC(FULL_VLAN_BYTE_SIZE); + + if (update->npeUpdateZone == NULL + || update->npeGwUpdateZone == NULL + || update->vlanUpdateZone == NULL) + { + ERROR_LOG("Fatal error: IX_ACC_DRV_DMA_MALLOC() returned NULL, no NPE update zones available\n"); + } + else + { + memset(update->npeUpdateZone, 0, FULL_ELT_BYTE_SIZE); + memset(update->npeGwUpdateZone, 0, FULL_GW_BYTE_SIZE); + memset(update->vlanUpdateZone, 0, FULL_VLAN_BYTE_SIZE); + } + } + else + { + /* unused */ + update->npeUpdateZone = NULL; + update->npeGwUpdateZone = NULL; + update->vlanUpdateZone = NULL; + } + } +} + +/** + * @brief deallocates the NPE update areas for all the ports + * + * This function is called at component de-initialization time + * by @ref ixEthDBUnload(). + * + * @warning do not call manually + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNPEUpdateAreasUnload(void) +{ + UINT32 portIndex; + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + if (ixEthDBPortDefinitions[portIndex].type == IX_ETH_NPE) + { + IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeUpdateZone); + IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.npeGwUpdateZone); + IX_OSAL_CACHE_DMA_FREE(ixEthDBPortInfo[portIndex].updateMethod.vlanUpdateZone); + } + } +} + +/** + * @brief general-purpose NPE callback function + * + * @param npeID NPE ID + * @param msg NPE message + * + * This function will unblock the caller by unlocking + * the npeAckLock mutex defined for each NPE port + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg) +{ + IxEthDBPortId portID = IX_ETH_DB_NPE_TO_PORT_ID(npeID); + PortInfo *portInfo; + + if (portID >= IX_ETH_DB_NUMBER_OF_PORTS) + { + /* invalid port */ + return; + } + + if (ixEthDBPortDefinitions[portID].type != IX_ETH_NPE) + { + /* not an NPE */ + return; + } + + portInfo = &ixEthDBPortInfo[portID]; + + ixOsalMutexUnlock(&portInfo->npeAckLock); +} + +/** + * @brief synchronizes the database with tree + * + * @param portID port ID of the NPE whose tree is to be scanned + * @param eltBaseAddress memory base address of the NPE serialized tree + * @param eltSize size in bytes of the NPE serialized tree + * + * Scans the NPE learning tree and resets the age of active database records. + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize) +{ + UINT32 eltEntryOffset; + UINT32 entryPortID; + + /* invalidate cache */ + IX_OSAL_CACHE_INVALIDATE(eltBaseAddress, eltSize); + + for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) + { + /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node + * + * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] + * therefore we can just use the pointer for database searches as only the first 6 bytes are checked + */ + void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); + + /* debug */ + IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) checking node at offset %d...\n", eltEntryOffset / ELT_ENTRY_SIZE); + + if (IX_EDB_NPE_NODE_VALID(eltNodeAddress) != TRUE) + { + IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is empty\n"); + } + else if (eltEntryOffset == ELT_ROOT_OFFSET) + { + IX_ETH_DB_NPE_VERBOSE_TRACE("\t... node is root\n"); + } + + if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) + { + entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); + + /* check only active entries belonging to this port */ + if (ixEthDBPortInfo[portID].agingEnabled && IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) && (portID == entryPortID) + && ((ixEthDBPortDefinitions[portID].capabilities & IX_ETH_ENTRY_AGING) == 0)) + { + /* search record */ + HashNode *node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_FILTERING_RECORDS); + + /* safety check, maybe user deleted record right before sync? */ + if (node != NULL) + { + /* found record */ + MacDescriptor *descriptor = (MacDescriptor *) node->data; + + IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) synced entry [%s] already in the database, updating fields\n", mac2string(eltNodeAddress)); + + /* reset age - set to -1 so that maintenance will restore it to 0 (or more) when incrementing */ + if (!descriptor->recordData.filteringData.staticEntry) + { + if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + descriptor->recordData.filteringData.age = AGE_RESET; + } + else if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) + { + descriptor->recordData.filteringVlanData.age = AGE_RESET; + } + } + + /* end transaction */ + ixEthDBReleaseHashNode(node); + } + } + else + { + IX_ETH_DB_NPE_VERBOSE_TRACE("\t... found portID %d, we check only port %d\n", entryPortID, portID); + } + } + } +} + +/** + * @brief writes a search tree in NPE format + * + * @param type type of records to be written into the NPE update zone + * @param totalSize maximum size of the linearized tree + * @param baseAddress memory base address where to write the NPE tree into + * @param tree search tree to write in NPE format + * @param blocks number of written 64-byte blocks + * @param startIndex optimal binary search start index + * + * Serializes the given tree in NPE linear format + * + * @return none + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *epDelta, UINT32 *blocks) +{ + MacTreeNodeStack *stack; + UINT32 maxOffset = 0; + UINT32 emptyOffset; + + stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack)); + + if (stack == NULL) + { + ERROR_LOG("DB: (NPEAdaptor) failed to allocate the node stack for learning tree linearization, out of memory?\n"); + return; + } + + /* zero out empty root */ + memset(baseAddress, 0, ELT_ENTRY_SIZE); + + NODE_STACK_INIT(stack); + + if (tree != NULL) + { + /* push tree root at offset 1 */ + NODE_STACK_PUSH(stack, tree, 1); + + maxOffset = 1; + } + + while (NODE_STACK_NONEMPTY(stack)) + { + MacTreeNode *node; + UINT32 offset; + + NODE_STACK_POP(stack, node, offset); + + /* update maximum offset */ + if (offset > maxOffset) + { + maxOffset = offset; + } + + IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing MAC [%s] at offset %d\n", mac2string(node->descriptor->macAddress), offset); + + /* add node to NPE ELT at position indicated by offset */ + if (offset < MAX_ELT_SIZE) + { + ixEthDBNPENodeWrite[type]((void *) (((UINT32) baseAddress) + offset * ELT_ENTRY_SIZE), node); + } + + if (node->left != NULL) + { + NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset)); + } + else + { + /* ensure this entry is zeroed */ + memset((void *) ((UINT32) baseAddress + LEFT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); + } + + if (node->right != NULL) + { + NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset)); + } + else + { + /* ensure this entry is zeroed */ + memset((void *) ((UINT32) baseAddress + RIGHT_CHILD_OFFSET(offset) * ELT_ENTRY_SIZE), 0, ELT_ENTRY_SIZE); + } + } + + emptyOffset = maxOffset + 1; + + /* zero out rest of the tree */ + IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Emptying tree from offset %d, address 0x%08X, %d bytes\n", + emptyOffset, ((UINT32) baseAddress) + emptyOffset * ELT_ENTRY_SIZE, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); + + if (emptyOffset < MAX_ELT_SIZE - 1) + { + memset((void *) (((UINT32) baseAddress) + (emptyOffset * ELT_ENTRY_SIZE)), 0, totalSize - (emptyOffset * ELT_ENTRY_SIZE)); + } + + /* flush cache */ + IX_OSAL_CACHE_FLUSH(baseAddress, totalSize); + + /* debug */ + IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Ethernet learning/filtering tree XScale wrote at address 0x%08X (max %d bytes):\n\n", + (UINT32) baseAddress, FULL_ELT_BYTE_SIZE); + + IX_ETH_DB_NPE_DUMP_ELT(baseAddress, FULL_ELT_BYTE_SIZE); + + /* compute number of 64-byte blocks */ + if (blocks != NULL) + { + *blocks = maxOffset != 0 ? 1 + maxOffset / 8 : 0; + + IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Wrote %d 64-byte blocks\n", *blocks); + } + + /* compute epDelta - start index for binary search */ + if (epDelta != NULL) + { + UINT32 deltaIndex = 0; + + *epDelta = 0; + + for (; deltaIndex < IX_ETH_DB_MAX_DELTA_ZONES ; deltaIndex ++) + { + if (ixEthDBEPDeltaOffset[type][deltaIndex] >= maxOffset) + { + *epDelta = ixEthDBEPDelta[type][deltaIndex]; + break; + } + } + + IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Computed epDelta %d (based on maxOffset %d)\n", *epDelta, maxOffset); + } + + ixOsalCacheDmaFree(stack); +} + +/** + * @brief implements a dummy node serialization function + * + * @param address address of where the node is to be serialized (unused) + * @param node tree node to be serialized (unused) + * + * This function is registered for safety reasons and should + * never be called. It will display an error message if this + * function is called. + * + * @return none + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBNullSerialize(void *address, MacTreeNode *node) +{ + IX_ETH_DB_NPE_TRACE("DB: (NPEAdaptor) Warning, the NullSerialize function was called, wrong record type?\n"); +} + +/** + * @brief writes a filtering entry in NPE linear format + * + * @param address memory address to write node to + * @param node node to be written + * + * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree + * in NPE-readable format. + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBNPELearningNodeWrite(void *address, MacTreeNode *node) +{ + /* copy mac address */ + memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); + + /* copy port ID */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET) = IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(node->descriptor->portID); + + /* copy flags (valid and not active, as the NPE sets it to active) and clear reserved section (bits 2-7) */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) = (UINT8) IX_EDB_FLAGS_INACTIVE_VALID; + + IX_ETH_DB_NPE_VERBOSE_TRACE("DB: (NPEAdaptor) writing ELT node 0x%08x:0x%08x\n", * (UINT32 *) address, * (((UINT32 *) (address)) + 1)); +} + +/** + * @brief writes a WiFi header conversion record in + * NPE linear format + * + * @param address memory address to write node to + * @param node node to be written + * + * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree + * in NPE-readable format. + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBNPEWiFiNodeWrite(void *address, MacTreeNode *node) +{ + /* copy mac address */ + memcpy(address, node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); + + /* copy index */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET) = node->descriptor->recordData.wifiData.gwAddressIndex; + + /* copy flags (type and valid) */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET) = node->descriptor->recordData.wifiData.type << 1 | IX_EDB_FLAGS_VALID; +} + +/** + * @brief writes a WiFi gateway header conversion record in + * NPE linear format + * + * @param address memory address to write node to + * @param node node to be written + * + * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree + * in NPE-readable format. + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node) +{ + /* copy mac address */ + memcpy(address, node->descriptor->recordData.wifiData.gwMacAddress, IX_IEEE803_MAC_ADDRESS_SIZE); + + /* set reserved field, two bytes */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET + 1) = 0; +} + +/** + * @brief writes a firewall record in + * NPE linear format + * + * @param address memory address to write node to + * @param node node to be written + * + * Used by @ref ixEthDBNPETreeWrite to liniarize a search tree + * in NPE-readable format. + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBNPEFirewallNodeWrite(void *address, MacTreeNode *node) +{ + /* set reserved field */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_RESERVED_OFFSET) = 0; + + /* set flags */ + NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_FW_FLAGS_OFFSET) = IX_EDB_FLAGS_VALID; + + /* copy mac address */ + memcpy((void *) ((UINT32) address + IX_EDB_NPE_NODE_FW_ADDR_OFFSET), node->descriptor->macAddress, IX_IEEE803_MAC_ADDRESS_SIZE); +} + +/** + * @brief registers the NPE serialization methods + * + * This functions registers NPE serialization methods + * for writing the following types of records in NPE + * readable linear format: + * - filtering records + * - WiFi header conversion records + * - WiFi gateway header conversion records + * - firewall records + * + * Note that this function should be called by the + * component initialization function. + * + * @return number of registered record types + * + * @internal + */ +IX_ETH_DB_PUBLIC +UINT32 ixEthDBRecordSerializeMethodsRegister() +{ + int i; + + /* safety - register a blank method for everybody first */ + for ( i = 0 ; i < IX_ETH_DB_MAX_RECORD_TYPE_INDEX + 1 ; i++) + { + ixEthDBNPENodeWrite[i] = ixEthDBNullSerialize; + } + + /* register real methods */ + ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_RECORD] = ixEthDBNPELearningNodeWrite; + ixEthDBNPENodeWrite[IX_ETH_DB_FILTERING_VLAN_RECORD] = ixEthDBNPELearningNodeWrite; + ixEthDBNPENodeWrite[IX_ETH_DB_WIFI_RECORD] = ixEthDBNPEWiFiNodeWrite; + ixEthDBNPENodeWrite[IX_ETH_DB_FIREWALL_RECORD] = ixEthDBNPEFirewallNodeWrite; + ixEthDBNPENodeWrite[IX_ETH_DB_GATEWAY_RECORD] = ixEthDBNPEGatewayNodeWrite; + + /* EP Delta arrays */ + memset(ixEthDBEPDeltaOffset, 0, sizeof (ixEthDBEPDeltaOffset)); + memset(ixEthDBEPDelta, 0, sizeof (ixEthDBEPDelta)); + + /* filtering records */ + ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][0] = 1; + ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][0] = 0; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][1] = 3; + ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][1] = 7; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FILTERING_RECORD][2] = 511; + ixEthDBEPDelta[IX_ETH_DB_FILTERING_RECORD][2] = 14; + + /* wifi records */ + ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][0] = 1; + ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][0] = 0; + + ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][1] = 3; + ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][1] = 7; + + ixEthDBEPDeltaOffset[IX_ETH_DB_WIFI_RECORD][2] = 511; + ixEthDBEPDelta[IX_ETH_DB_WIFI_RECORD][2] = 14; + + /* firewall records */ + ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][0] = 0; + ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][0] = 0; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][1] = 1; + ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][1] = 5; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][2] = 3; + ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][2] = 13; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][3] = 7; + ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][3] = 21; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][4] = 15; + ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][4] = 29; + + ixEthDBEPDeltaOffset[IX_ETH_DB_FIREWALL_RECORD][5] = 31; + ixEthDBEPDelta[IX_ETH_DB_FIREWALL_RECORD][5] = 37; + + return 5; /* 5 methods registered */ +} + +#ifndef IX_NDEBUG + +IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; +IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen = 0; + +/** + * When compiled in DEBUG mode, this function can be used to display + * the history of messages sent to the NPEs (up to 100). + */ +IX_ETH_DB_PUBLIC +void ixEthDBShowNpeMsgHistory() +{ + UINT32 i = 0; + UINT32 base, len; + + if (npeMsgHistoryLen <= IX_ETH_DB_NPE_MSG_HISTORY_DEPTH) + { + base = 0; + len = npeMsgHistoryLen; + } + else + { + base = npeMsgHistoryLen % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; + len = IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; + } + + printf("NPE message history [last %d messages, from least to most recent]:\n", len); + + for (; i < len ; i++) + { + UINT32 pos = (base + i) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; + printf("msg[%d]: 0x%08x:0x%08x\n", i, npeMsgHistory[pos][0], npeMsgHistory[pos][1]); + } +} + +IX_ETH_DB_PUBLIC +void ixEthDBELTShow(IxEthDBPortId portID) +{ + IxNpeMhMessage message; + IX_STATUS result; + + /* send EDB_GetMACAddressDatabase message */ + FILL_GETMACADDRESSDATABASE(message, + 0 /* reserved */, + IX_OSAL_MMU_VIRT_TO_PHYS(ixEthDBPortInfo[portID].updateMethod.npeUpdateZone)); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + if (result == IX_SUCCESS) + { + /* analyze NPE copy */ + UINT32 eltEntryOffset; + UINT32 entryPortID; + + UINT32 eltBaseAddress = (UINT32) ixEthDBPortInfo[portID].updateMethod.npeUpdateZone; + UINT32 eltSize = FULL_ELT_BYTE_SIZE; + + /* invalidate cache */ + IX_OSAL_CACHE_INVALIDATE((void *) eltBaseAddress, eltSize); + + printf("Listing records in main learning tree for port %d\n", portID); + + for (eltEntryOffset = ELT_ROOT_OFFSET ; eltEntryOffset < eltSize ; eltEntryOffset += ELT_ENTRY_SIZE) + { + /* (eltBaseAddress + eltEntryOffset) points to a valid NPE tree node + * + * the format of the node is MAC[6 bytes]:PortID[1 byte]:Reserved[6 bits]:Active[1 bit]:Valid[1 bit] + * therefore we can just use the pointer for database searches as only the first 6 bytes are checked + */ + void *eltNodeAddress = (void *) ((UINT32) eltBaseAddress + eltEntryOffset); + + if (IX_EDB_NPE_NODE_VALID(eltNodeAddress)) + { + HashNode *node; + + entryPortID = IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(IX_EDB_NPE_NODE_PORT_ID(eltNodeAddress)); + + /* search record */ + node = ixEthDBSearch((IxEthDBMacAddr *) eltNodeAddress, IX_ETH_DB_ALL_RECORD_TYPES); + + printf("%s - port %d - %s ", mac2string((unsigned char *) eltNodeAddress), entryPortID, + IX_EDB_NPE_NODE_ACTIVE(eltNodeAddress) ? "active" : "inactive"); + + /* safety check, maybe user deleted record right before sync? */ + if (node != NULL) + { + /* found record */ + MacDescriptor *descriptor = (MacDescriptor *) node->data; + + printf("- %s ", + descriptor->type == IX_ETH_DB_FILTERING_RECORD ? "filtering" : + descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD ? "vlan" : + descriptor->type == IX_ETH_DB_WIFI_RECORD ? "wifi" : "other (check main DB)"); + + if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) printf("- age %d - %s ", + descriptor->recordData.filteringData.age, + descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); + + if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) printf("- age %d - %s - tci %d ", + descriptor->recordData.filteringVlanData.age, + descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic", + descriptor->recordData.filteringVlanData.ieee802_1qTag); + + /* end transaction */ + ixEthDBReleaseHashNode(node); + } + else + { + printf("- not synced"); + } + + printf("\n"); + } + } + } + else + { + ixOsalLog(IX_OSAL_LOG_LVL_FATAL, IX_OSAL_LOG_DEV_STDOUT, + "EthDB: (ShowELT) Could not complete action (communication failure)\n", + portID, 0, 0, 0, 0, 0); + } +} + +#endif diff --git a/drivers/net/npe/IxEthDBPortUpdate.c b/drivers/net/npe/IxEthDBPortUpdate.c new file mode 100644 index 0000000000..cdf114bfc4 --- /dev/null +++ b/drivers/net/npe/IxEthDBPortUpdate.c @@ -0,0 +1,740 @@ +/** + * @file IxEthDBDBPortUpdate.c + * + * @brief Implementation of dependency and port update handling + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" + +/* forward prototype declarations */ +IX_ETH_DB_PRIVATE MacTreeNode* ixEthDBTreeInsert(MacTreeNode *searchTree, MacDescriptor *descriptor); +IX_ETH_DB_PRIVATE void ixEthDBCreateTrees(IxEthDBPortMap updatePorts); +IX_ETH_DB_PRIVATE MacTreeNode* ixEthDBTreeRebalance(MacTreeNode *searchTree); +IX_ETH_DB_PRIVATE void ixEthDBRebalanceTreeToVine(MacTreeNode *root, UINT32 *size); +IX_ETH_DB_PRIVATE void ixEthDBRebalanceVineToTree(MacTreeNode *root, UINT32 size); +IX_ETH_DB_PRIVATE void ixEthDBRebalanceCompression(MacTreeNode *root, UINT32 count); +IX_ETH_DB_PRIVATE UINT32 ixEthDBRebalanceLog2Floor(UINT32 x); + +extern HashTable dbHashtable; + +/** + * @brief register types requiring automatic updates + * + * @param typeArray array indexed on record types, each + * element indicating whether the record type requires an + * automatic update (TRUE) or not (FALSE) + * + * Automatic updates are done for registered record types + * upon adding, updating (that is, updating the record portID) + * and removing records. Whenever an automatic update is triggered + * the appropriate ports will be provided with new database + * information. + * + * It is assumed that the typeArray parameter is allocated large + * enough to hold all the user defined types. Also, the type + * array should be initialized to FALSE as this function only + * caters for types which do require automatic updates. + * + * Note that this function should be called by the component + * initialization function. + * + * @return number of record types registered for automatic + * updates + * + * @internal + */ +IX_ETH_DB_PUBLIC +UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray) +{ + typeArray[IX_ETH_DB_FILTERING_RECORD] = TRUE; + typeArray[IX_ETH_DB_FILTERING_VLAN_RECORD] = TRUE; + + return 2; +} + +/** + * @brief computes dependencies and triggers port learning tree updates + * + * @param triggerPorts port map consisting in the ports which triggered the update + * + * This function browses through all the ports and determines how to waterfall the update + * event from the trigger ports to all other ports depending on them. + * + * Once the list of ports to be updated is determined this function + * calls @ref ixEthDBCreateTrees. + * + * @internal + */ +IX_ETH_DB_PUBLIC +void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts) +{ + IxEthDBPortMap updatePorts; + UINT32 portIndex; + + ixEthDBUpdateLock(); + + SET_EMPTY_DEPENDENCY_MAP(updatePorts); + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + PortInfo *port = &ixEthDBPortInfo[portIndex]; + BOOL mapsCollide; + + MAPS_COLLIDE(mapsCollide, triggerPorts, port->dependencyPortMap); + + if (mapsCollide /* do triggers influence this port? */ + && !IS_PORT_INCLUDED(portIndex, updatePorts) /* and it's not already in the update list */ + && port->updateMethod.updateEnabled) /* and we're allowed to update it */ + { + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Adding port %d to update set\n", portIndex); + + JOIN_PORT_TO_MAP(updatePorts, portIndex); + } + else + { + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Didn't add port %d to update set, reasons follow:\n", portIndex); + + if (!mapsCollide) + { + IX_ETH_DB_UPDATE_TRACE("\tMaps don't collide on port %d\n", portIndex); + } + + if (IS_PORT_INCLUDED(portIndex, updatePorts)) + { + IX_ETH_DB_UPDATE_TRACE("\tPort %d is already in the update set\n", portIndex); + } + + if (!port->updateMethod.updateEnabled) + { + IX_ETH_DB_UPDATE_TRACE("\tPort %d doesn't have updateEnabled set\n", portIndex); + } + } + } + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Updating port set\n"); + + ixEthDBCreateTrees(updatePorts); + + ixEthDBUpdateUnlock(); +} + +/** + * @brief creates learning trees and calls the port update handlers + * + * @param updatePorts set of ports in need of learning trees + * + * This function determines the optimal method of creating learning + * trees using a minimal number of database queries, keeping in mind + * that different ports can either use the same learning trees or they + * can partially share them. The actual tree building routine is + * @ref ixEthDBQuery. + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBCreateTrees(IxEthDBPortMap updatePorts) +{ + UINT32 portIndex; + BOOL result; + BOOL portsLeft = TRUE; + + while (portsLeft) + { + /* get port with minimal dependency map and NULL search tree */ + UINT32 minPortIndex = MAX_PORT_SIZE; + UINT32 minimalSize = MAX_PORT_SIZE; + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + UINT32 size; + PortInfo *port = &ixEthDBPortInfo[portIndex]; + + /* generate trees only for ports that need them */ + if (!port->updateMethod.searchTreePendingWrite && IS_PORT_INCLUDED(portIndex, updatePorts)) + { + GET_MAP_SIZE(port->dependencyPortMap, size); + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Dependency map for port %d: size %d\n", + portIndex, size); + + if (size < minimalSize) + { + minPortIndex = portIndex; + minimalSize = size; + } + } + else + { + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Skipped port %d from tree diff (%s)\n", portIndex, + port->updateMethod.searchTreePendingWrite ? "pending write access" : "ignored by query"); + } + } + + /* if a port was found than minimalSize is not MAX_PORT_SIZE */ + if (minimalSize != MAX_PORT_SIZE) + { + /* minPortIndex is the port we seek */ + PortInfo *port = &ixEthDBPortInfo[minPortIndex]; + + IxEthDBPortMap query; + MacTreeNode *baseTree; + + /* now try to find a port with minimal map difference */ + PortInfo *minimalDiffPort = NULL; + UINT32 minimalDiff = MAX_PORT_SIZE; + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Minimal size port is %d\n", minPortIndex); + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + PortInfo *diffPort = &ixEthDBPortInfo[portIndex]; + BOOL mapIsSubset; + + IS_MAP_SUBSET(mapIsSubset, diffPort->dependencyPortMap, port->dependencyPortMap); + + + if (portIndex != minPortIndex + && diffPort->updateMethod.searchTree != NULL + && mapIsSubset) + { + /* compute size and pick only minimal size difference */ + UINT32 diffPortSize; + UINT32 sizeDifference; + + GET_MAP_SIZE(diffPort->dependencyPortMap, diffPortSize); + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Checking port %d for differences...\n", portIndex); + + sizeDifference = minimalSize - diffPortSize; + + if (sizeDifference < minimalDiff) + { + minimalDiffPort = diffPort; + minimalDiff = sizeDifference; + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Minimal difference 0x%x was found on port %d\n", + minimalDiff, portIndex); + } + } + } + + /* check if filtering is enabled on this port */ + if ((port->featureStatus & IX_ETH_DB_FILTERING) != 0) + { + /* if minimalDiff is not MAX_PORT_SIZE minimalDiffPort points to the most similar port */ + if (minimalDiff != MAX_PORT_SIZE) + { + baseTree = ixEthDBCloneMacTreeNode(minimalDiffPort->updateMethod.searchTree); + DIFF_MAPS(query, port->dependencyPortMap , minimalDiffPort->dependencyPortMap); + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Found minimal diff, extending tree %d on query\n", + minimalDiffPort->portID); + } + else /* .. otherwise no similar port was found, build tree from scratch */ + { + baseTree = NULL; + + COPY_DEPENDENCY_MAP(query, port->dependencyPortMap); + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) No similar diff, creating tree from query\n"); + } + + IS_EMPTY_DEPENDENCY_MAP(result, query); + + if (!result) /* otherwise we don't need anything more on top of the cloned tree */ + { + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Adding query tree to port %d\n", minPortIndex); + + /* build learning tree */ + port->updateMethod.searchTree = ixEthDBQuery(baseTree, query, IX_ETH_DB_ALL_FILTERING_RECORDS, MAX_ELT_SIZE); + } + else + { + IX_ETH_DB_UPDATE_TRACE("DB: (Update) Query is empty, assuming identical nearest tree\n"); + + port->updateMethod.searchTree = baseTree; + } + } + else + { + /* filtering is not enabled, will download an empty tree */ + if (port->updateMethod.searchTree != NULL) + { + ixEthDBFreeMacTreeNode(port->updateMethod.searchTree); + } + + port->updateMethod.searchTree = NULL; + } + + /* mark tree as valid */ + port->updateMethod.searchTreePendingWrite = TRUE; + } + else + { + portsLeft = FALSE; + + IX_ETH_DB_UPDATE_TRACE("DB: (Update) No trees to create this round\n"); + } + } + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + PortInfo *updatePort = &ixEthDBPortInfo[portIndex]; + + if (updatePort->updateMethod.searchTreePendingWrite) + { + IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) Starting procedure to upload new search tree (%snull) into NPE %d\n", + updatePort->updateMethod.searchTree != NULL ? "not " : "", + portIndex); + + updatePort->updateMethod.updateHandler(portIndex, IX_ETH_DB_FILTERING_RECORD); + } + } +} + +/** + * @brief standard NPE update handler + * + * @param portID id of the port to be updated + * @param type record type to be pushed during this update + * + * The NPE update handler manages updating the NPE databases + * given a certain record type. + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type) +{ + UINT32 epDelta, blockCount; + IxNpeMhMessage message; + UINT32 treeSize = 0; + PortInfo *port = &ixEthDBPortInfo[portID]; + + /* size selection and type check */ + if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD) + { + treeSize = FULL_ELT_BYTE_SIZE; + } + else if (type == IX_ETH_DB_FIREWALL_RECORD) + { + treeSize = FULL_FW_BYTE_SIZE; + } + else + { + return IX_ETH_DB_INVALID_ARG; + } + + /* serialize tree into memory */ + ixEthDBNPETreeWrite(type, treeSize, port->updateMethod.npeUpdateZone, port->updateMethod.searchTree, &epDelta, &blockCount); + + /* free internal copy */ + if (port->updateMethod.searchTree != NULL) + { + ixEthDBFreeMacTreeNode(port->updateMethod.searchTree); + } + + /* forget last used search tree */ + port->updateMethod.searchTree = NULL; + port->updateMethod.searchTreePendingWrite = FALSE; + + /* dependending on the update type we do different things */ + if (type == IX_ETH_DB_FILTERING_RECORD || type == IX_ETH_DB_WIFI_RECORD) + { + IX_STATUS result; + + FILL_SETMACADDRESSDATABASE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), + epDelta, blockCount, + IX_OSAL_MMU_VIRT_TO_PHYS(port->updateMethod.npeUpdateZone)); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + if (result == IX_SUCCESS) + { + IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) Finished downloading NPE tree on port %d\n", portID); + } + else + { + ixEthDBPortInfo[portID].agingEnabled = FALSE; + ixEthDBPortInfo[portID].updateMethod.updateEnabled = FALSE; + ixEthDBPortInfo[portID].updateMethod.userControlled = TRUE; + + ERROR_LOG("EthDB: (PortUpdate) disabling aging and updates on port %d (assumed dead)\n", portID); + + ixEthDBDatabaseClear(portID, IX_ETH_DB_ALL_RECORD_TYPES); + + return IX_ETH_DB_FAIL; + } + + return IX_ETH_DB_SUCCESS; + } + else if (type == IX_ETH_DB_FIREWALL_RECORD) + { + return ixEthDBFirewallUpdate(portID, port->updateMethod.npeUpdateZone, epDelta); + } + + return IX_ETH_DB_INVALID_ARG; +} + +/** + * @brief queries the database for a set of records to be inserted into a given tree + * + * @param searchTree pointer to a tree where insertions will be performed; can be NULL + * @param query set of ports that a database record must match to be inserted into the tree + * + * The query method browses through the database, extracts all the descriptors matching + * the given query parameter and inserts them into the given learning tree. + * Note that this is an append procedure, the given tree needs not to be empty. + * A "descriptor matching the query" is a descriptor whose port id is in the query map. + * If the given tree is empty (NULL) a new tree is created and returned. + * + * @return the tree root + * + * @internal + */ +IX_ETH_DB_PUBLIC +MacTreeNode* ixEthDBQuery(MacTreeNode *searchTree, IxEthDBPortMap query, IxEthDBRecordType recordFilter, UINT32 maxEntries) +{ + HashIterator iterator; + UINT32 entryCount = 0; + + /* browse database */ + BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); + + while (IS_ITERATOR_VALID(&iterator)) + { + MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; + + IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) querying [%s]:%d on port map ... ", + mac2string(descriptor->macAddress), + descriptor->portID); + + if ((descriptor->type & recordFilter) != 0 + && IS_PORT_INCLUDED(descriptor->portID, query)) + { + MacDescriptor *descriptorClone = ixEthDBCloneMacDescriptor(descriptor); + + IX_ETH_DB_UPDATE_TRACE("match\n"); + + if (descriptorClone != NULL) + { + /* add descriptor to tree */ + searchTree = ixEthDBTreeInsert(searchTree, descriptorClone); + + entryCount++; + } + } + else + { + IX_ETH_DB_UPDATE_TRACE("no match\n"); + } + + if (entryCount < maxEntries) + { + /* advance to the next record */ + BUSY_RETRY(ixEthDBIncrementHashIterator(&dbHashtable, &iterator)); + } + else + { + /* the NPE won't accept more entries so we can stop now */ + ixEthDBReleaseHashIterator(&iterator); + + IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) number of elements reached maximum supported by port\n"); + + break; + } + } + + IX_ETH_DB_UPDATE_TRACE("DB: (PortUpdate) query inserted %d records in the search tree\n", entryCount); + + return ixEthDBTreeRebalance(searchTree); +} + +/** + * @brief inserts a mac descriptor into an tree + * + * @param searchTree tree where the insertion is to be performed (may be NULL) + * @param descriptor descriptor to insert into tree + * + * @return the tree root + * + * @internal + */ +IX_ETH_DB_PRIVATE +MacTreeNode* ixEthDBTreeInsert(MacTreeNode *searchTree, MacDescriptor *descriptor) +{ + MacTreeNode *currentNode = searchTree; + MacTreeNode *insertLocation = NULL; + MacTreeNode *newNode; + INT32 insertPosition = RIGHT; + + if (descriptor == NULL) + { + return searchTree; + } + + /* create a new node */ + newNode = ixEthDBAllocMacTreeNode(); + + if (newNode == NULL) + { + /* out of memory */ + ERROR_LOG("Warning: ixEthDBAllocMacTreeNode returned NULL in file %s:%d (out of memory?)\n", __FILE__, __LINE__); + + ixEthDBFreeMacDescriptor(descriptor); + + return NULL; + } + + /* populate node */ + newNode->descriptor = descriptor; + + /* an empty initial tree is a special case */ + if (searchTree == NULL) + { + return newNode; + } + + /* get insertion location */ + while (insertLocation == NULL) + { + MacTreeNode *nextNode; + + /* compare given key with current node key */ + insertPosition = ixEthDBAddressCompare(descriptor->macAddress, currentNode->descriptor->macAddress); + + /* navigate down */ + if (insertPosition == RIGHT) + { + nextNode = currentNode->right; + } + else if (insertPosition == LEFT) + { + nextNode = currentNode->left; + } + else + { + /* error, duplicate key */ + ERROR_LOG("Warning: trapped insertion of a duplicate MAC address in an NPE search tree\n"); + + /* this will free the MAC descriptor as well */ + ixEthDBFreeMacTreeNode(newNode); + + return searchTree; + } + + /* when we can no longer dive through the tree we found the insertion place */ + if (nextNode != NULL) + { + currentNode = nextNode; + } + else + { + insertLocation = currentNode; + } + } + + /* insert node */ + if (insertPosition == RIGHT) + { + insertLocation->right = newNode; + } + else + { + insertLocation->left = newNode; + } + + return searchTree; +} + +/** + * @brief balance a tree + * + * @param searchTree tree to balance + * + * Converts a tree into a balanced tree and returns the root of + * the balanced tree. The resulting tree is <i>route balanced</i> + * not <i>perfectly balanced</i>. This makes no difference to the + * average tree search time which is the same in both cases, O(log2(n)). + * + * @return root of the balanced tree or NULL if there's no memory left + * + * @internal + */ +IX_ETH_DB_PRIVATE +MacTreeNode* ixEthDBTreeRebalance(MacTreeNode *searchTree) +{ + MacTreeNode *pseudoRoot = ixEthDBAllocMacTreeNode(); + UINT32 size; + + if (pseudoRoot == NULL) + { + /* out of memory */ + return NULL; + } + + pseudoRoot->right = searchTree; + + ixEthDBRebalanceTreeToVine(pseudoRoot, &size); + ixEthDBRebalanceVineToTree(pseudoRoot, size); + + searchTree = pseudoRoot->right; + + /* remove pseudoRoot right branch, otherwise it will free the entire tree */ + pseudoRoot->right = NULL; + + ixEthDBFreeMacTreeNode(pseudoRoot); + + return searchTree; +} + +/** + * @brief converts a tree into a vine + * + * @param root root of tree to convert + * @param size depth of vine (equal to the number of nodes in the tree) + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBRebalanceTreeToVine(MacTreeNode *root, UINT32 *size) +{ + MacTreeNode *vineTail = root; + MacTreeNode *remainder = vineTail->right; + MacTreeNode *tempPtr; + + *size = 0; + + while (remainder != NULL) + { + if (remainder->left == NULL) + { + /* move tail down one */ + vineTail = remainder; + remainder = remainder->right; + (*size)++; + } + else + { + /* rotate around remainder */ + tempPtr = remainder->left; + remainder->left = tempPtr->right; + tempPtr->right = remainder; + remainder = tempPtr; + vineTail->right = tempPtr; + } + } +} + +/** + * @brief converts a vine into a balanced tree + * + * @param root vine to convert + * @param size depth of vine + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBRebalanceVineToTree(MacTreeNode *root, UINT32 size) +{ + UINT32 leafCount = size + 1 - (1 << ixEthDBRebalanceLog2Floor(size + 1)); + + ixEthDBRebalanceCompression(root, leafCount); + + size = size - leafCount; + + while (size > 1) + { + ixEthDBRebalanceCompression(root, size / 2); + + size /= 2; + } +} + +/** + * @brief compresses a vine/tree stage into a more balanced vine/tree + * + * @param root root of the tree to compress + * @param count number of "spine" nodes + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBRebalanceCompression(MacTreeNode *root, UINT32 count) +{ + MacTreeNode *scanner = root; + MacTreeNode *child; + UINT32 local_index; + + for (local_index = 0 ; local_index < count ; local_index++) + { + child = scanner->right; + scanner->right = child->right; + scanner = scanner->right; + child->right = scanner->left; + scanner->left = child; + } +} + +/** + * @brief computes |_log2(x)_| (a.k.a. floor(log2(x))) + * + * @param x number to compute |_log2(x)_| for + * + * @return |_log2(x)_| + * + * @internal + */ +IX_ETH_DB_PRIVATE +UINT32 ixEthDBRebalanceLog2Floor(UINT32 x) +{ + UINT32 log = 0; + UINT32 val = 1; + + while (val < x) + { + log++; + val <<= 1; + } + + return val == x ? log : log - 1; +} + diff --git a/drivers/net/npe/IxEthDBReports.c b/drivers/net/npe/IxEthDBReports.c new file mode 100644 index 0000000000..9c7ae1cc6a --- /dev/null +++ b/drivers/net/npe/IxEthDBReports.c @@ -0,0 +1,652 @@ +/** + * @file IxEthDBAPI.c + * + * @brief Implementation of the public API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" + +extern HashTable dbHashtable; +IX_ETH_DB_PRIVATE void ixEthDBPortInfoShow(IxEthDBPortId portID, IxEthDBRecordType recordFilter); +IX_ETH_DB_PRIVATE IxEthDBStatus ixEthDBHeaderShow(IxEthDBRecordType recordFilter); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map); + +/** + * @brief displays a port dependency map + * + * @param portID ID of the port + * @param map port map to display + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBDependencyPortMapShow(IxEthDBPortId portID, IxEthDBPortMap map) +{ + UINT32 portIndex; + BOOL mapSelf = TRUE, mapNone = TRUE, firstPort = TRUE; + + /* dependency port maps */ + printf("Dependency port map: "); + + /* browse the port map */ + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + if (IS_PORT_INCLUDED(portIndex, map)) + { + mapNone = FALSE; + + if (portIndex != portID) + { + mapSelf = FALSE; + } + + printf("%s%d", firstPort ? "{" : ", ", portIndex); + + firstPort = FALSE; + } + } + + if (mapNone) + { + mapSelf = FALSE; + } + + printf("%s (%s)\n", firstPort ? "" : "}", mapSelf ? "self" : mapNone ? "none" : "group"); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief displays all the filtering records belonging to a port + * + * @param portID ID of the port to display + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @warning deprecated, use @ref ixEthDBFilteringDatabaseShowRecords() + * instead. Calling this function is equivalent to calling + * ixEthDBFilteringDatabaseShowRecords(portID, IX_ETH_DB_FILTERING_RECORD) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID) +{ + IxEthDBStatus local_result; + HashIterator iterator; + PortInfo *portInfo; + UINT32 recordCount = 0; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + portInfo = &ixEthDBPortInfo[portID]; + + /* display table header */ + printf("Ethernet database records for port ID [%d]\n", portID); + + ixEthDBDependencyPortMapShow(portID, portInfo->dependencyPortMap); + + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + printf("NPE updates are %s\n\n", portInfo->updateMethod.updateEnabled ? "enabled" : "disabled"); + } + else + { + printf("updates disabled (not an NPE)\n\n"); + } + + printf(" MAC address | Age | Type \n"); + printf("___________________________________\n"); + + /* browse database */ + BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); + + while (IS_ITERATOR_VALID(&iterator)) + { + MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; + + if (descriptor->portID == portID && descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + recordCount++; + + /* display entry */ + printf(" %02X:%02X:%02X:%02X:%02X:%02X | %5d | %s\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.filteringData.age, + descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); + } + + /* move to the next record */ + BUSY_RETRY_WITH_RESULT(ixEthDBIncrementHashIterator(&dbHashtable, &iterator), local_result); + + /* debug */ + if (local_result == IX_ETH_DB_BUSY) + { + return IX_ETH_DB_FAIL; + } + } + + /* display number of records */ + printf("\nFound %d records\n", recordCount); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief displays all the filtering records belonging to all the ports + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @warning deprecated, use @ref ixEthDBFilteringDatabaseShowRecords() + * instead. Calling this function is equivalent to calling + * ixEthDBFilteringDatabaseShowRecords(IX_ETH_DB_ALL_PORTS, IX_ETH_DB_FILTERING_RECORD) + */ +IX_ETH_DB_PUBLIC +void ixEthDBFilteringDatabaseShowAll() +{ + IxEthDBPortId portIndex; + + printf("\nEthernet learning/filtering database: listing %d ports\n\n", (UINT32) IX_ETH_DB_NUMBER_OF_PORTS); + + for (portIndex = 0 ; portIndex < IX_ETH_DB_NUMBER_OF_PORTS ; portIndex++) + { + ixEthDBFilteringDatabaseShow(portIndex); + + if (portIndex < IX_ETH_DB_NUMBER_OF_PORTS - 1) + { + printf("\n"); + } + } +} + +/** + * @brief displays one record in a format depending on the record filter + * + * @param descriptor pointer to the record + * @param recordFilter format filter + * + * This function will display the fields in a record depending on the + * selected record filter. + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBRecordShow(MacDescriptor *descriptor, IxEthDBRecordType recordFilter) +{ + if (recordFilter == IX_ETH_DB_FILTERING_VLAN_RECORD + || recordFilter == (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD)) + { + /* display VLAN record header - leave this commented code in place, its purpose is to align the print format with the header + printf(" MAC address | Age | Type | VLAN ID | CFI | QoS class \n"); + printf("___________________________________________________________________\n"); */ + + if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s | %d | %d | %d\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.filteringVlanData.age, + descriptor->recordData.filteringVlanData.staticEntry ? "static" : "dynamic", + IX_ETH_DB_GET_VLAN_ID(descriptor->recordData.filteringVlanData.ieee802_1qTag), + (descriptor->recordData.filteringVlanData.ieee802_1qTag & 0x1000) >> 12, + IX_ETH_DB_GET_QOS_PRIORITY(descriptor->recordData.filteringVlanData.ieee802_1qTag)); + } + else if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s | - | - | -\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.filteringData.age, + descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); + } + } + else if (recordFilter == IX_ETH_DB_FILTERING_RECORD) + { + /* display filtering record header - leave this commented code in place, its purpose is to align the print format with the header + printf(" MAC address | Age | Type \n"); + printf("_______________________________________\n"); */ + + if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X | %3d | %s \n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.filteringData.age, + descriptor->recordData.filteringData.staticEntry ? "static" : "dynamic"); + } + } + else if (recordFilter == IX_ETH_DB_WIFI_RECORD) + { + /* display WiFi record header - leave this commented code in place, its purpose is to align the print format with the header + printf(" MAC address | GW MAC address \n"); + printf("_______________________________________\n"); */ + + if (descriptor->type == IX_ETH_DB_WIFI_RECORD) + { + if (descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP) + { + /* gateway address present */ + printf("%02X:%02X:%02X:%02X:%02X:%02X | %02X:%02X:%02X:%02X:%02X:%02X \n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.wifiData.gwMacAddress[0], + descriptor->recordData.wifiData.gwMacAddress[1], + descriptor->recordData.wifiData.gwMacAddress[2], + descriptor->recordData.wifiData.gwMacAddress[3], + descriptor->recordData.wifiData.gwMacAddress[4], + descriptor->recordData.wifiData.gwMacAddress[5]); + } + else + { + /* no gateway */ + printf("%02X:%02X:%02X:%02X:%02X:%02X | ----no gateway----- \n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5]); + } + } + } + else if (recordFilter == IX_ETH_DB_FIREWALL_RECORD) + { + /* display Firewall record header - leave this commented code in place, its purpose is to align the print format with the header + printf(" MAC address \n"); + printf("__________________\n"); */ + + if (descriptor->type == IX_ETH_DB_FIREWALL_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X \n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5]); + } + } + else if (recordFilter == IX_ETH_DB_ALL_RECORD_TYPES) + { + /* display composite record header - leave this commented code in place, its purpose is to align the print format with the header + printf(" MAC address | Record | Age| Type | VLAN |CFI| QoS | GW MAC address \n"); + printf("_______________________________________________________________________________\n"); */ + + if (descriptor->type == IX_ETH_DB_FILTERING_VLAN_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X | VLAN | %2d | %s | %4d | %1d | %1d | -----------------\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.filteringVlanData.age, + descriptor->recordData.filteringVlanData.staticEntry ? "static " : "dynamic", + IX_ETH_DB_GET_VLAN_ID(descriptor->recordData.filteringVlanData.ieee802_1qTag), + (descriptor->recordData.filteringVlanData.ieee802_1qTag & 0x1000) >> 12, + IX_ETH_DB_GET_QOS_PRIORITY(descriptor->recordData.filteringVlanData.ieee802_1qTag)); + } + else if (descriptor->type == IX_ETH_DB_FILTERING_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X | Filter | %2d | %s | ---- | - | --- | -----------------\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.filteringData.age, + descriptor->recordData.filteringData.staticEntry ? "static " : "dynamic"); + } + else if (descriptor->type == IX_ETH_DB_WIFI_RECORD) + { + if (descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP) + { + /* gateway address present */ + printf("%02X:%02X:%02X:%02X:%02X:%02X | WiFi | -- | AP=>AP | ---- | - | --- | %02X:%02X:%02X:%02X:%02X:%02X\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5], + descriptor->recordData.wifiData.gwMacAddress[0], + descriptor->recordData.wifiData.gwMacAddress[1], + descriptor->recordData.wifiData.gwMacAddress[2], + descriptor->recordData.wifiData.gwMacAddress[3], + descriptor->recordData.wifiData.gwMacAddress[4], + descriptor->recordData.wifiData.gwMacAddress[5]); + } + else + { + /* no gateway */ + printf("%02X:%02X:%02X:%02X:%02X:%02X | WiFi | -- | AP=>ST | ---- | - | --- | -- no gateway -- \n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5]); + } + } + else if (descriptor->type == IX_ETH_DB_FIREWALL_RECORD) + { + printf("%02X:%02X:%02X:%02X:%02X:%02X | FW | -- | ------- | ---- | - | --- | -----------------\n", + descriptor->macAddress[0], + descriptor->macAddress[1], + descriptor->macAddress[2], + descriptor->macAddress[3], + descriptor->macAddress[4], + descriptor->macAddress[5]); + } + } + else + { + printf("invalid record filter\n"); + } +} + +/** + * @brief displays the status, records and configuration information of a port + * + * @param portID ID of the port + * @param recordFilter record filter to display + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBPortInfoShow(IxEthDBPortId portID, IxEthDBRecordType recordFilter) +{ + PortInfo *portInfo = &ixEthDBPortInfo[portID]; + UINT32 recordCount = 0; + HashIterator iterator; + IxEthDBStatus local_result; + + /* display port status */ + printf("== Port ID %d ==\n", portID); + + /* display capabilities */ + printf("- Capabilities: "); + + if ((portInfo->featureCapability & IX_ETH_DB_LEARNING) != 0) + { + printf("Learning (%s) ", ((portInfo->featureStatus & IX_ETH_DB_LEARNING) != 0) ? "on" : "off"); + } + + if ((portInfo->featureCapability & IX_ETH_DB_VLAN_QOS) != 0) + { + printf("VLAN/QoS (%s) ", ((portInfo->featureStatus & IX_ETH_DB_VLAN_QOS) != 0) ? "on" : "off"); + } + + if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) + { + printf("Firewall (%s) ", ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0) ? "on" : "off"); + } + + if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) + { + printf("WiFi (%s) ", ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) ? "on" : "off"); + } + + if ((portInfo->featureCapability & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) + { + printf("STP (%s) ", ((portInfo->featureStatus & IX_ETH_DB_SPANNING_TREE_PROTOCOL) != 0) ? "on" : "off"); + } + + printf("\n"); + + /* dependency map */ + ixEthDBDependencyPortMapShow(portID, portInfo->dependencyPortMap); + + /* NPE dynamic updates */ + if (ixEthDBPortDefinitions[portID].type == IX_ETH_NPE) + { + printf(" - NPE dynamic update is %s\n", portInfo->updateMethod.updateEnabled ? "enabled" : "disabled"); + } + else + { + printf(" - dynamic update disabled (not an NPE)\n"); + } + + if ((portInfo->featureCapability & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) + { + if ((portInfo->featureStatus & IX_ETH_DB_WIFI_HEADER_CONVERSION) != 0) + { + /* WiFi header conversion */ + if ((portInfo->frameControlDurationID + + portInfo->bbsid[0] + + portInfo->bbsid[1] + + portInfo->bbsid[2] + + portInfo->bbsid[3] + + portInfo->bbsid[4] + + portInfo->bbsid[5]) == 0) + { + printf(" - WiFi header conversion not configured\n"); + } + else + { + printf(" - WiFi header conversion: BBSID [%02X:%02X:%02X:%02X:%02X:%02X], Frame Control 0x%X, Duration/ID 0x%X\n", + portInfo->bbsid[0], + portInfo->bbsid[1], + portInfo->bbsid[2], + portInfo->bbsid[3], + portInfo->bbsid[4], + portInfo->bbsid[5], + portInfo->frameControlDurationID >> 16, + portInfo->frameControlDurationID & 0xFFFF); + } + } + else + { + printf(" - WiFi header conversion not enabled\n"); + } + } + + /* Firewall */ + if ((portInfo->featureCapability & IX_ETH_DB_FIREWALL) != 0) + { + if ((portInfo->featureStatus & IX_ETH_DB_FIREWALL) != 0) + { + printf(" - Firewall is in %s-list mode\n", portInfo->firewallMode == IX_ETH_DB_FIREWALL_BLACK_LIST ? "black" : "white"); + printf(" - Invalid source MAC address filtering is %s\n", portInfo->srcAddressFilterEnabled ? "enabled" : "disabled"); + } + else + { + printf(" - Firewall not enabled\n"); + } + } + + /* browse database if asked to display records */ + if (recordFilter != IX_ETH_DB_NO_RECORD_TYPE) + { + printf("\n"); + ixEthDBHeaderShow(recordFilter); + + BUSY_RETRY(ixEthDBInitHashIterator(&dbHashtable, &iterator)); + + while (IS_ITERATOR_VALID(&iterator)) + { + MacDescriptor *descriptor = (MacDescriptor *) iterator.node->data; + + if (descriptor->portID == portID && (descriptor->type & recordFilter) != 0) + { + recordCount++; + + /* display entry */ + ixEthDBRecordShow(descriptor, recordFilter); + } + + /* move to the next record */ + BUSY_RETRY_WITH_RESULT(ixEthDBIncrementHashIterator(&dbHashtable, &iterator), local_result); + + /* debug */ + if (local_result == IX_ETH_DB_BUSY) + { + printf("EthDB (API): Error, database browser failed (no access), giving up\n"); + } + } + + printf("\nFound %d records\n\n", recordCount); + } +} + +/** + * @brief displays a record header + * + * @param recordFilter record type filter + * + * This function displays a record header, depending on + * the given record type filter. It is useful when used + * in conjunction with ixEthDBRecordShow which will display + * record fields formatted for the header, provided the same + * record filter is used. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or IX_ETH_DB_INVALID_ARG if the recordFilter + * parameter is invalid or not supported + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBHeaderShow(IxEthDBRecordType recordFilter) +{ + if (recordFilter == IX_ETH_DB_FILTERING_VLAN_RECORD + || recordFilter == (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD)) + { + /* display VLAN record header */ + printf(" MAC address | Age | Type | VLAN ID | CFI | QoS class \n"); + printf("___________________________________________________________________\n"); + } + else if (recordFilter == IX_ETH_DB_FILTERING_RECORD) + { + /* display filtering record header */ + printf(" MAC address | Age | Type \n"); + printf("_______________________________________\n"); + } + else if (recordFilter == IX_ETH_DB_WIFI_RECORD) + { + /* display WiFi record header */ + printf(" MAC address | GW MAC address \n"); + printf("_______________________________________\n"); + } + else if (recordFilter == IX_ETH_DB_FIREWALL_RECORD) + { + /* display Firewall record header */ + printf(" MAC address \n"); + printf("__________________\n"); + } + else if (recordFilter == IX_ETH_DB_ALL_RECORD_TYPES) + { + /* display composite record header */ + printf(" MAC address | Record | Age| Type | VLAN |CFI| QoS | GW MAC address \n"); + printf("_______________________________________________________________________________\n"); + } + else + { + return IX_ETH_DB_INVALID_ARG; + } + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief displays database information (records and port information) + * + * @param portID ID of the port to display (or IX_ETH_DB_ALL_PORTS for all the ports) + * @param recordFilter record filter (use IX_ETH_DB_NO_RECORD_TYPE to display only + * port information) + * + * Note that this function is documented in the main component header + * file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully or + * an appropriate error code otherwise + * + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter) +{ + IxEthDBPortId currentPort; + BOOL showAllPorts = (portID == IX_ETH_DB_ALL_PORTS); + + IX_ETH_DB_CHECK_PORT_ALL(portID); + + printf("\nEthernet learning/filtering database: listing %d port(s)\n\n", showAllPorts ? (UINT32) IX_ETH_DB_NUMBER_OF_PORTS : 1); + + currentPort = showAllPorts ? 0 : portID; + + while (currentPort != IX_ETH_DB_NUMBER_OF_PORTS) + { + /* display port info */ + ixEthDBPortInfoShow(currentPort, recordFilter); + + /* next port */ + currentPort = showAllPorts ? currentPort + 1 : IX_ETH_DB_NUMBER_OF_PORTS; + } + + return IX_ETH_DB_SUCCESS; +} + diff --git a/drivers/net/npe/IxEthDBSearch.c b/drivers/net/npe/IxEthDBSearch.c new file mode 100644 index 0000000000..4a10878b68 --- /dev/null +++ b/drivers/net/npe/IxEthDBSearch.c @@ -0,0 +1,327 @@ +/** + * @file IxEthDBSearch.c + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" + +extern HashTable dbHashtable; + +/** + * @brief matches two database records based on their MAC addresses + * + * @param untypedReference record to match against + * @param untypedEntry record to match + * + * @return TRUE if the match is successful or FALSE otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry) +{ + MacDescriptor *entry = (MacDescriptor *) untypedEntry; + MacDescriptor *reference = (MacDescriptor *) untypedReference; + + /* check accepted record types */ + if ((entry->type & reference->type) == 0) return FALSE; + + return (ixEthDBAddressCompare((UINT8 *) entry->macAddress, (UINT8 *) reference->macAddress) == 0); +} + +/** + * @brief matches two database records based on their MAC addresses + * and VLAN IDs + * + * @param untypedReference record to match against + * @param untypedEntry record to match + * + * @return TRUE if the match is successful or FALSE otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry) +{ + MacDescriptor *entry = (MacDescriptor *) untypedEntry; + MacDescriptor *reference = (MacDescriptor *) untypedReference; + + /* check accepted record types */ + if ((entry->type & reference->type) == 0) return FALSE; + + return (IX_ETH_DB_GET_VLAN_ID(entry->recordData.filteringVlanData.ieee802_1qTag) == + IX_ETH_DB_GET_VLAN_ID(reference->recordData.filteringVlanData.ieee802_1qTag)) && + (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0); +} + +/** + * @brief matches two database records based on their MAC addresses + * and port IDs + * + * @param untypedReference record to match against + * @param untypedEntry record to match + * + * @return TRUE if the match is successful or FALSE otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry) +{ + MacDescriptor *entry = (MacDescriptor *) untypedEntry; + MacDescriptor *reference = (MacDescriptor *) untypedReference; + + /* check accepted record types */ + if ((entry->type & reference->type) == 0) return FALSE; + + return (entry->portID == reference->portID) && + (ixEthDBAddressCompare(entry->macAddress, reference->macAddress) == 0); +} + +/** + * @brief dummy matching function, registered for safety + * + * @param reference record to match against (unused) + * @param entry record to match (unused) + * + * This function is registered in the matching functions + * array on invalid types. Calling it will display an + * error message, indicating an error in the component logic. + * + * @return FALSE + * + * @internal + */ +IX_ETH_DB_PUBLIC +BOOL ixEthDBNullMatch(void *reference, void *entry) +{ + /* display an error message */ + + ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, "DB: (Search) The NullMatch function was called, wrong key type?\n", 0, 0, 0, 0, 0, 0); + + + return FALSE; +} + +/** + * @brief registers hash matching methods + * + * @param matchFunctions table of match functions to be populated + * + * This function registers the available record matching functions + * by indexing them on record types into the given function array. + * + * Note that it is compulsory to call this in ixEthDBInit(), + * otherwise hashtable searching and removal will not work + * + * @return number of registered functions + * + * @internal + */ +IX_ETH_DB_PUBLIC +UINT32 ixEthDBMatchMethodsRegister(MatchFunction *matchFunctions) +{ + UINT32 i; + + /* safety first */ + for ( i = 0 ; i < IX_ETH_DB_MAX_KEY_INDEX + 1 ; i++) + { + matchFunctions[i] = ixEthDBNullMatch; + } + + /* register MAC search method */ + matchFunctions[IX_ETH_DB_MAC_KEY] = ixEthDBAddressRecordMatch; + + /* register MAC/PortID search method */ + matchFunctions[IX_ETH_DB_MAC_PORT_KEY] = ixEthDBPortRecordMatch; + + /* register MAC/VLAN ID search method */ + matchFunctions[IX_ETH_DB_MAC_VLAN_KEY] = ixEthDBVlanRecordMatch; + + return 3; /* three methods */ +} + +/** + * @brief search a record in the Ethernet datbase + * + * @param macAddress MAC address to perform the search on + * @param typeFilter type of records to consider for matching + * + * @warning if searching is successful an implicit write lock + * to the search result is granted, therefore unlock the + * entry using @ref ixEthDBReleaseHashNode() as soon as possible. + * + * @see ixEthDBReleaseHashNode() + * + * @return the search result, or NULL if a record with the given + * MAC address was not found + * + * @internal + */ +IX_ETH_DB_PUBLIC +HashNode* ixEthDBSearch(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter) +{ + HashNode *searchResult = NULL; + MacDescriptor reference; + + TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; + + if (macAddress == NULL) + { + return NULL; + } + + /* fill search fields */ + memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); + + /* set acceptable record types */ + reference.type = typeFilter; + + BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_KEY, &reference, &searchResult)); + + return searchResult; +} + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPeek(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter) +{ + MacDescriptor reference; + IxEthDBStatus result; + + TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER; + + if (macAddress == NULL) + { + return IX_ETH_DB_INVALID_ARG; + } + + /* fill search fields */ + memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); + + /* set acceptable record types */ + reference.type = typeFilter; + + result = ixEthDBPeekHashEntry(&dbHashtable, IX_ETH_DB_MAC_KEY, &reference); + + return result; +} + +/** + * @brief search a record in the Ethernet datbase + * + * @param macAddress MAC address to perform the search on + * @param portID port ID to perform the search on + * @param typeFilter type of records to consider for matching + * + * @warning if searching is successful an implicit write lock + * to the search result is granted, therefore unlock the + * entry using @ref ixEthDBReleaseHashNode() as soon as possible. + * + * @see ixEthDBReleaseHashNode() + * + * @return the search result, or NULL if a record with the given + * MAC address/port ID combination was not found + * + * @internal + */ +IX_ETH_DB_PUBLIC +HashNode* ixEthDBPortSearch(IxEthDBMacAddr *macAddress, IxEthDBPortId portID, IxEthDBRecordType typeFilter) +{ + HashNode *searchResult = NULL; + MacDescriptor reference; + + if (macAddress == NULL) + { + return NULL; + } + + /* fill search fields */ + memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); + reference.portID = portID; + + /* set acceptable record types */ + reference.type = typeFilter; + + BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_PORT_KEY, &reference, &searchResult)); + + return searchResult; +} + +/** + * @brief search a record in the Ethernet datbase + * + * @param macAddress MAC address to perform the search on + * @param vlanID VLAN ID to perform the search on + * @param typeFilter type of records to consider for matching + * + * @warning if searching is successful an implicit write lock + * to the search result is granted, therefore unlock the + * entry using @ref ixEthDBReleaseHashNode() as soon as possible. + * + * @see ixEthDBReleaseHashNode() + * + * @return the search result, or NULL if a record with the given + * MAC address/VLAN ID combination was not found + * + * @internal + */ +IX_ETH_DB_PUBLIC +HashNode* ixEthDBVlanSearch(IxEthDBMacAddr *macAddress, IxEthDBVlanId vlanID, IxEthDBRecordType typeFilter) +{ + HashNode *searchResult = NULL; + MacDescriptor reference; + + if (macAddress == NULL) + { + return NULL; + } + + /* fill search fields */ + memcpy(reference.macAddress, macAddress, sizeof (IxEthDBMacAddr)); + reference.recordData.filteringVlanData.ieee802_1qTag = + IX_ETH_DB_SET_VLAN_ID(reference.recordData.filteringVlanData.ieee802_1qTag, vlanID); + + /* set acceptable record types */ + reference.type = typeFilter; + + BUSY_RETRY(ixEthDBSearchHashEntry(&dbHashtable, IX_ETH_DB_MAC_VLAN_KEY, &reference, &searchResult)); + + return searchResult; +} diff --git a/drivers/net/npe/IxEthDBSpanningTree.c b/drivers/net/npe/IxEthDBSpanningTree.c new file mode 100644 index 0000000000..6d9fd6ec18 --- /dev/null +++ b/drivers/net/npe/IxEthDBSpanningTree.c @@ -0,0 +1,107 @@ +/** + * @file IxEthDBSpanningTree.c + * + * @brief Implementation of the STP API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#include "IxEthDB_p.h" + +/** + * @brief sets the STP blocking state of a port + * + * @param portID ID of the port + * @param blocked TRUE to block the port or FALSE to unblock it + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked) +{ + IxNpeMhMessage message; + IX_STATUS result; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_SPANNING_TREE_PROTOCOL); + + ixEthDBPortInfo[portID].stpBlocked = blocked; + + FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief retrieves the STP blocking state of a port + * + * @param portID ID of the port + * @param blocked address to write the blocked status into + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_SPANNING_TREE_PROTOCOL); + + IX_ETH_DB_CHECK_REFERENCE(blocked); + + *blocked = ixEthDBPortInfo[portID].stpBlocked; + + return IX_ETH_DB_SUCCESS; +} diff --git a/drivers/net/npe/IxEthDBUtil.c b/drivers/net/npe/IxEthDBUtil.c new file mode 100644 index 0000000000..e708bf1bce --- /dev/null +++ b/drivers/net/npe/IxEthDBUtil.c @@ -0,0 +1,120 @@ +/** + * @file ethUtil.c + * + * @brief Utility functions + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#include "IxFeatureCtrl.h" +#include "IxEthDB_p.h" + +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBSingleEthNpeCheck(IxEthDBPortId portID) +{ + /* If not IXP42X A0 stepping, proceed to check for existence of coprocessors */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if ((portID == 0) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + return IX_ETH_DB_FAIL; + } + + if ((portID == 1) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + return IX_ETH_DB_FAIL; + } + + if ((portID == 2) && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA_ETH) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + return IX_ETH_DB_FAIL; + } + } + + return IX_ETH_DB_SUCCESS; +} + +IX_ETH_DB_PUBLIC +BOOL ixEthDBCheckSingleBitValue(UINT32 value) +{ +#if (CPU != SIMSPARCSOLARIS) && !defined (__wince) + UINT32 shift; + + /* use the count-leading-zeros XScale instruction */ + __asm__ ("clz %0, %1\n" : "=r" (shift) : "r" (value)); + + return ((value << shift) == 0x80000000UL); + +#else + + while (value != 0) + { + if (value == 1) return TRUE; + else if ((value & 1) == 1) return FALSE; + + value >>= 1; + } + + return FALSE; + +#endif +} + +const char *mac2string(const unsigned char *mac) +{ + static char str[19]; + + if (mac == NULL) + { + return NULL; + } + + sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + + return str; +} diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c new file mode 100644 index 0000000000..e2efb9b339 --- /dev/null +++ b/drivers/net/npe/IxEthDBVlan.c @@ -0,0 +1,1179 @@ +/** + * @file IxEthDBVlan.c + * + * @brief Implementation of the VLAN API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB.h" +#include "IxEthDB_p.h" + +/* forward prototypes */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex); +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet); + +/* contants used by various functions as "action" parameter */ +#define ADD_VLAN (0x1) +#define REMOVE_VLAN (0x2) + +/** + * @brief adds or removes a VLAN from a VLAN set + * + * @param vlanID VLAN ID to add or remove + * @param table VLAN set to add into or remove from + * @param action ADD_VLAN or REMOVE_VLAN + * + * @internal + */ +IX_ETH_DB_PRIVATE +void ixEthDBLocalVlanMembershipChange(UINT32 vlanID, IxEthDBVlanSet table, UINT32 action) +{ + UINT32 setOffset; + + /* add/remove VID to membership table */ + setOffset = VLAN_SET_OFFSET(vlanID); /* we need 9 bits to index the 512 byte membership array */ + + if (action == ADD_VLAN) + { + table[setOffset] |= 1 << VLAN_SET_MASK(vlanID); + } + else if (action == REMOVE_VLAN) + { + table[setOffset] &= ~(1 << VLAN_SET_MASK(vlanID)); + } +} + +/** + * @brief updates a set of 8 VLANs in an NPE + * + * @param portID ID of the port + * @param setOffset offset of the 8 VLANs + * + * This function updates the VLAN membership table + * and Transmit Tagging Info table for 8 consecutive + * VLAN IDs indexed by setOffset. + * + * For example, a setOffset of 0 indexes VLAN IDs 0 + * through 7, 1 indexes VLAN IDs 8 through 9 etc. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBVlanTableEntryUpdate(IxEthDBPortId portID, UINT32 setOffset) +{ + PortInfo *portInfo = &ixEthDBPortInfo[portID]; + IxNpeMhMessage message; + IX_STATUS result; + + FILL_SETPORTVLANTABLEENTRY_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), + 2 * setOffset, + portInfo->vlanMembership[setOffset], + portInfo->transmitTaggingInfo[setOffset]); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief updates a VLAN range in an NPE + * + * @param portID ID of the port + * + * This function is similar to @ref ixEthDBVlanTableEntryUpdate + * except that it can update more than one VLAN set (up to + * the entire VLAN membership and TTI tables if the offset is 0 + * and length is sizeof (IxEthDBVlanSet) (512 bytes). + * + * Updating the NPE via this method is slower as it requires + * a memory copy from SDRAM, hence it is recommended that the + * ixEthDBVlanTableEntryUpdate function is used where possible. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBVlanTableRangeUpdate(IxEthDBPortId portID) +{ + PortInfo *portInfo = &ixEthDBPortInfo[portID]; + UINT8 *vlanUpdateZone = (UINT8 *) portInfo->updateMethod.vlanUpdateZone; + IxNpeMhMessage message; + UINT32 setIndex; + IX_STATUS result; + + /* copy membership info and transmit tagging into into exchange area */ + for (setIndex = 0 ; setIndex < sizeof (portInfo->vlanMembership) ; setIndex++) + { + /* membership and TTI data are interleaved */ + vlanUpdateZone[setIndex * 2] = portInfo->vlanMembership[setIndex]; + vlanUpdateZone[setIndex * 2 + 1] = portInfo->transmitTaggingInfo[setIndex]; + } + + IX_OSAL_CACHE_FLUSH(vlanUpdateZone, FULL_VLAN_BYTE_SIZE); + + /* build NPE message */ + FILL_SETPORTVLANTABLERANGE_MSG(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), 0, 0, + IX_OSAL_MMU_VIRT_TO_PHYS(vlanUpdateZone)); + + /* send message */ + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief adds or removes a VLAN from a port's VLAN membership table + * or Transmit Tagging Information table + * + * @param portID ID of the port + * @param vlanID VLAN ID to add or remove + * @param table to add or remove from + * @param action ADD_VLAN or REMOVE_VLAN + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBPortVlanMembershipChange(IxEthDBPortId portID, IxEthDBVlanId vlanID, IxEthDBVlanSet table, UINT32 action) +{ + /* change VLAN in local membership table */ + ixEthDBLocalVlanMembershipChange(vlanID, table, action); + + /* send updated entry to NPE */ + return ixEthDBVlanTableEntryUpdate(portID, VLAN_SET_OFFSET(vlanID)); +} + +/** + * @brief sets the default port VLAN tag (the lower 3 bytes are the PVID) + * + * @param portID ID of the port + * @param vlanTag port VLAN tag (802.1Q tag) + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag) +{ + IxNpeMhMessage message; + IX_STATUS result; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_VLAN_TAG(vlanTag); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + /* add VLAN ID to local membership table */ + ixEthDBPortVlanMembershipChange(portID, + vlanTag & IX_ETH_DB_802_1Q_VLAN_MASK, + ixEthDBPortInfo[portID].vlanMembership, + ADD_VLAN); + + /* set tag in portInfo */ + ixEthDBPortInfo[portID].vlanTag = vlanTag; + + /* build VLAN_SetDefaultRxVID message */ + FILL_SETDEFAULTRXVID_MSG(message, + IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), + IX_IEEE802_1Q_VLAN_TPID, + vlanTag); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief retrieves the default port VLAN tag (the lower 3 bytes are the PVID) + * + * @param portID ID of the port + * @param vlanTag address to write the port VLAN tag (802.1Q tag) into + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(vlanTag); + + *vlanTag = ixEthDBPortInfo[portID].vlanTag; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief sets the VLAN tag (the lower 3 bytes are the PVID) of a + * database filtering record + * + * @param portID ID of the port + * @param vlanTag VLAN tag (802.1Q tag) + * + * Important: filtering records are automatically converted to + * IX_ETH_DB_FILTERING_VLAN record when added a VLAN tag. + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag) +{ + HashNode *searchResult; + MacDescriptor *descriptor; + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_VLAN_TAG(vlanTag); + + searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_ALL_FILTERING_RECORDS); + + if (searchResult == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; + } + + descriptor = (MacDescriptor *) searchResult->data; + + /* set record type to VLAN if not already set */ + descriptor->type = IX_ETH_DB_FILTERING_VLAN_RECORD; + + /* add vlan tag */ + descriptor->recordData.filteringVlanData.ieee802_1qTag = vlanTag; + + /* transaction completed */ + ixEthDBReleaseHashNode(searchResult); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief retrieves the VLAN tag (the lower 3 bytes are the PVID) from a + * database VLAN filtering record + * + * @param portID ID of the port + * @param vlanTag address to write the VLAN tag (802.1Q tag) into + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag) +{ + HashNode *searchResult; + MacDescriptor *descriptor; + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_REFERENCE(vlanTag); + + searchResult = ixEthDBSearch(macAddr, IX_ETH_DB_FILTERING_VLAN_RECORD); + + if (searchResult == NULL) + { + return IX_ETH_DB_NO_SUCH_ADDR; + } + + descriptor = (MacDescriptor *) searchResult->data; + + /* get vlan tag */ + *vlanTag = descriptor->recordData.filteringVlanData.ieee802_1qTag; + + /* transaction completed */ + ixEthDBReleaseHashNode(searchResult); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief adds a VLAN to a port's VLAN membership table + * + * @param portID ID of the port + * @param vlanID VLAN ID to add + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_VLAN_ID(vlanID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN); +} + +/** + * @brief removes a VLAN from a port's VLAN membership table + * + * @param portID ID of the port + * @param vlanID VLAN ID to remove + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_VLAN_ID(vlanID); + + /* for safety isolate only the VLAN ID in the tag (the lower 12 bits) */ + vlanID = vlanID & IX_ETH_DB_802_1Q_VLAN_MASK; + + /* check we're not asked to remove the default port VID */ + if (vlanID == IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag)) + { + return IX_ETH_DB_NO_PERMISSION; + } + + return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN); +} + +/** + * @brief adds or removes a VLAN range from a port's + * VLAN membership table or TTI table + * + * @param portID ID of the port + * @param vlanIDMin start of the VLAN range + * @param vlanIDMax end of the VLAN range + * @param table VLAN set to add or remove from + * @param action ADD_VLAN or REMOVE_VLAN + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBPortVlanMembershipRangeChange(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, IxEthDBVlanSet table, UINT32 action) +{ + UINT32 setOffsetMin, setOffsetMax; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_VLAN_ID(vlanIDMin); + + IX_ETH_DB_CHECK_VLAN_ID(vlanIDMax); + + /* for safety isolate only the VLAN ID in the tags (the lower 12 bits) */ + vlanIDMin = vlanIDMin & IX_ETH_DB_802_1Q_VLAN_MASK; + vlanIDMax = vlanIDMax & IX_ETH_DB_802_1Q_VLAN_MASK; + + /* is this a range? */ + if (vlanIDMax < vlanIDMin) + { + return IX_ETH_DB_INVALID_VLAN; + } + + /* check that we're not specifically asked to remove the default port VID */ + if (action == REMOVE_VLAN && vlanIDMax == vlanIDMin && IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag) == vlanIDMin) + { + return IX_ETH_DB_NO_PERMISSION; + } + + /* compute set offsets */ + setOffsetMin = VLAN_SET_OFFSET(vlanIDMin); + setOffsetMax = VLAN_SET_OFFSET(vlanIDMax); + + /* change VLAN range */ + for (; vlanIDMin <= vlanIDMax ; vlanIDMin++) + { + /* change vlan in local membership table */ + ixEthDBLocalVlanMembershipChange(vlanIDMin, table, action); + } + + /* if the range is within one set (max 8 VLANs in one table byte) we can just update that entry in the NPE */ + if (setOffsetMin == setOffsetMax) + { + /* send updated entry to NPE */ + return ixEthDBVlanTableEntryUpdate(portID, setOffsetMin); + } + else + { + /* update a zone of the membership/transmit tag info table */ + return ixEthDBVlanTableRangeUpdate(portID); + } +} + +/** + * @brief adds a VLAN range to a port's VLAN membership table + * + * @param portID ID of the port + * @param vlanIDMin start of the VLAN range + * @param vlanIDMax end of the VLAN range + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, ADD_VLAN); +} + +/** + * @brief removes a VLAN range from a port's VLAN membership table + * + * @param portID ID of the port + * @param vlanIDMin start of the VLAN range + * @param vlanIDMax end of the VLAN range + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].vlanMembership, REMOVE_VLAN); +} + +/** + * @brief sets a port's VLAN membership table or TTI table and + * updates the NPE VLAN configuration + * + * @param portID ID of the port + * @param portVlanTable port VLAN table to set + * @param vlanSet new set contents + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(vlanSet); + + memcpy(portVlanTable, vlanSet, sizeof (IxEthDBVlanSet)); + + return ixEthDBVlanTableRangeUpdate(portID); +} + +/** + * @brief retireves a port's VLAN membership table or TTI table + * + * @param portID ID of the port + * @param portVlanTable port VLAN table to retrieve + * @param vlanSet address to + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanTableGet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(vlanSet); + + memcpy(vlanSet, portVlanTable, sizeof (IxEthDBVlanSet)); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief sets a port's VLAN membership table + * + * @param portID ID of the port + * @param vlanSet new VLAN membership table + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) +{ + IxEthDBVlanId vlanID; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(vlanSet); + + /* set the bit corresponding to the PVID just in case */ + vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag); + vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID); + + return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet); +} + +/** + * @brief retrieves a port's VLAN membership table + * + * @param portID ID of the port + * @param vlanSet location to store the port's VLAN membership table + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].vlanMembership, vlanSet); +} + +/** + * @brief enables or disables Egress tagging for one VLAN ID + * + * @param portID ID of the port + * @param vlanID VLAN ID to enable or disable Egress tagging on + * @param enabled TRUE to enable and FALSE to disable tagging + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_VLAN_ID(vlanID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + return ixEthDBPortVlanMembershipChange(portID, vlanID, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN); +} + +/** + * @brief retrieves the Egress tagging status for one VLAN ID + * + * @param portID ID of the port + * @param vlanID VLAN ID to retrieve the tagging status for + * @param enabled location to store the tagging status + * (TRUE - tagging enabled, FALSE - tagging disabled) + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(enabled); + + IX_ETH_DB_CHECK_VLAN_ID(vlanID); + + *enabled = ((ixEthDBPortInfo[portID].transmitTaggingInfo[VLAN_SET_OFFSET(vlanID)] & (1 << VLAN_SET_MASK(vlanID))) != 0); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief enables or disables Egress VLAN tagging for a VLAN range + * + * @param portID ID of the port + * @param vlanIDMin start of VLAN range + * @param vlanIDMax end of VLAN range + * @param enabled TRUE to enable or FALSE to disable VLAN tagging + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + return ixEthDBPortVlanMembershipRangeChange(portID, vlanIDMin, vlanIDMax, ixEthDBPortInfo[portID].transmitTaggingInfo, enabled? ADD_VLAN : REMOVE_VLAN); +} + +/** + * @brief sets the Egress VLAN tagging table (the Transmit Tagging + * Information table) + * + * @param portID ID of the port + * @param vlanSet new TTI table + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) +{ + IxEthDBVlanId vlanID; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(vlanSet); + + /* set the PVID bit just in case */ + vlanID = IX_ETH_DB_GET_VLAN_ID(ixEthDBPortInfo[portID].vlanTag); + vlanSet[VLAN_SET_OFFSET(vlanID)] |= 1 << VLAN_SET_MASK(vlanID); + + return ixEthDBPortVlanTableSet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet); +} + +/** + * @brief retrieves the Egress VLAN tagging table (the Transmit + * Tagging Information table) + * + * @param portID ID of the port + * @param vlanSet location to store the port's TTI table + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + return ixEthDBVlanTableGet(portID, ixEthDBPortInfo[portID].transmitTaggingInfo, vlanSet); +} + +/** + * @brief sends the NPE the updated frame filter and default + * Ingress tagging + * + * @param portID ID of the port + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBIngressVlanModeUpdate(IxEthDBPortId portID) +{ + PortInfo *portInfo = &ixEthDBPortInfo[portID]; + IxNpeMhMessage message; + IX_STATUS result; + + FILL_SETRXTAGMODE_MSG(message, portID, portInfo->npeFrameFilter, portInfo->npeTaggingAction); + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief sets the default Ingress tagging behavior + * + * @param portID ID of the port + * @param taggingAction default tagging behavior + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction) +{ + PortInfo *portInfo; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + portInfo = &ixEthDBPortInfo[portID]; + + if (taggingAction == IX_ETH_DB_PASS_THROUGH) + { + portInfo->npeTaggingAction = 0x00; + } + else if (taggingAction == IX_ETH_DB_ADD_TAG) + { + portInfo->npeTaggingAction = 0x02; + } + else if (taggingAction == IX_ETH_DB_REMOVE_TAG) + { + portInfo->npeTaggingAction = 0x01; + } + else + { + return IX_ETH_DB_INVALID_ARG; + } + + portInfo->taggingAction = taggingAction; + + return ixEthDBIngressVlanModeUpdate(portID); +} + +/** + * @brief retrieves the default Ingress tagging behavior of a port + * + * @param portID ID of the port + * @param taggingAction location to save the default tagging behavior + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(taggingAction); + + *taggingAction = ixEthDBPortInfo[portID].taggingAction; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief sets the Ingress acceptable frame type filter + * + * @param portID ID of the port + * @param frameFilter acceptable frame type filter + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter) +{ + PortInfo *portInfo; + IxEthDBStatus result = IX_ETH_DB_SUCCESS; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + /* check parameter range + the ORed value of the valid values is 0x7 + a value having extra bits is invalid */ + if ((frameFilter | 0x7) != 0x7 || frameFilter == 0) + { + return IX_ETH_DB_INVALID_ARG; + } + + portInfo = &ixEthDBPortInfo[portID]; + + portInfo->frameFilter = frameFilter; + portInfo->npeFrameFilter = 0; /* allow all by default */ + + /* if accepting priority tagged but not all VLAN tagged + set the membership table to contain only VLAN ID 0 + hence remove vlans 1-4094 and add VLAN ID 0 */ + if (((frameFilter & IX_ETH_DB_PRIORITY_TAGGED_FRAMES) != 0) + && ((frameFilter & IX_ETH_DB_VLAN_TAGGED_FRAMES) == 0)) + { + result = ixEthDBPortVlanMembershipRangeChange(portID, + 1, IX_ETH_DB_802_1Q_MAX_VLAN_ID, portInfo->vlanMembership, REMOVE_VLAN); + + if (result == IX_ETH_DB_SUCCESS) + { + ixEthDBLocalVlanMembershipChange(0, portInfo->vlanMembership, ADD_VLAN); + result = ixEthDBVlanTableRangeUpdate(portID); + } + } + + /* untagged only? */ + if (frameFilter == IX_ETH_DB_UNTAGGED_FRAMES) + { + portInfo->npeFrameFilter = 0x01; + } + + /* tagged only? */ + if ((frameFilter & IX_ETH_DB_UNTAGGED_FRAMES) == 0) + { + portInfo->npeFrameFilter = 0x02; + } + + if (result == IX_ETH_DB_SUCCESS) + { + result = ixEthDBIngressVlanModeUpdate(portID); + } + + return result; +} + +/** + * @brief retrieves the acceptable frame type filter for a port + * + * @param portID ID of the port + * @param frameFilter location to store the frame filter + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(frameFilter); + + *frameFilter = ixEthDBPortInfo[portID].frameFilter; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief sends an NPE the updated configuration related + * to one QoS priority (associated traffic class and AQM mapping) + * + * @param portID ID of the port + * @param classIndex QoS priority (traffic class index) + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUpdateTrafficClass(IxEthDBPortId portID, UINT32 classIndex) +{ + IxNpeMhMessage message; + IX_STATUS result; + + UINT32 trafficClass = ixEthDBPortInfo[portID].priorityTable[classIndex]; + UINT32 aqmQueue = ixEthDBPortInfo[portID].ixEthDBTrafficClassAQMAssignments[trafficClass]; + + FILL_SETRXQOSENTRY(message, IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(portID), classIndex, trafficClass, aqmQueue); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief sets the priority mapping table + * + * @param portID ID of the port + * @param priorityTable new priority mapping table + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) +{ + UINT32 classIndex; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(priorityTable); + + for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++) + { + /* check range */ + if (priorityTable[classIndex] >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) + { + return IX_ETH_DB_INVALID_PRIORITY; + } + } + + /* set new traffic classes */ + for (classIndex = 0 ; classIndex < IX_IEEE802_1Q_QOS_PRIORITY_COUNT ; classIndex++) + { + ixEthDBPortInfo[portID].priorityTable[classIndex] = priorityTable[classIndex]; + + if (ixEthDBUpdateTrafficClass(portID, classIndex) != IX_ETH_DB_SUCCESS) + { + return IX_ETH_DB_FAIL; + } + } + + return IX_ETH_DB_SUCCESS; + } + +/** + * @brief retrieves a port's priority mapping table + * + * @param portID ID of the port + * @param priorityTable location to store the priority table + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(priorityTable); + + memcpy(priorityTable, ixEthDBPortInfo[portID].priorityTable, sizeof (IxEthDBPriorityTable)); + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief sets one QoS priority => traffic class mapping + * + * @param portID ID of the port + * @param userPriority QoS (user) priority + * @param trafficClass associated traffic class + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + /* check ranges for userPriority and trafficClass */ + if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT || trafficClass >= ixEthDBPortInfo[portID].ixEthDBTrafficClassCount) + { + return IX_ETH_DB_INVALID_PRIORITY; + } + + ixEthDBPortInfo[portID].priorityTable[userPriority] = trafficClass; + + return ixEthDBUpdateTrafficClass(portID, userPriority); +} + +/** + * @brief retrieves one QoS priority => traffic class mapping + * + * @param portID ID of the port + * @param userPriority QoS (user) priority + * @param trafficClass location to store the associated traffic class + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + IX_ETH_DB_CHECK_REFERENCE(trafficClass); + + /* check userPriority range */ + if (userPriority >= IX_IEEE802_1Q_QOS_PRIORITY_COUNT) + { + return IX_ETH_DB_INVALID_PRIORITY; + } + + *trafficClass = ixEthDBPortInfo[portID].priorityTable[userPriority]; + + return IX_ETH_DB_SUCCESS; +} + +/** + * @brief enables or disables the source port extraction + * from the VLAN TPID field + * + * @param portID ID of the port + * @param enable TRUE to enable or FALSE to disable + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable) +{ + IxNpeMhMessage message; + IX_STATUS result; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_VLAN_QOS); + + FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} diff --git a/drivers/net/npe/IxEthDBWiFi.c b/drivers/net/npe/IxEthDBWiFi.c new file mode 100644 index 0000000000..0a6043f364 --- /dev/null +++ b/drivers/net/npe/IxEthDBWiFi.c @@ -0,0 +1,480 @@ +/** + * @file IxEthDBAPI.c + * + * @brief Implementation of the public API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxEthDB_p.h" + +/* forward prototypes */ +IX_ETH_DB_PUBLIC +MacTreeNode *ixEthDBGatewaySelect(MacTreeNode *stations); + +/** + * @brief sets the BBSID value for the WiFi header conversion feature + * + * @param portID ID of the port + * @param bbsid pointer to the 6-byte BBSID value + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid) +{ + IxNpeMhMessage message; + IX_STATUS result; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); + + IX_ETH_DB_CHECK_REFERENCE(bbsid); + + memcpy(ixEthDBPortInfo[portID].bbsid, bbsid, sizeof (IxEthDBMacAddr)); + + FILL_SETBBSID_MSG(message, portID, bbsid); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief updates the Frame Control and Duration/ID WiFi header + * conversion parameters in an NPE + * + * @param portID ID of the port + * + * This function will send a message to the NPE updating the + * frame conversion parameters for 802.3 => 802.11 header conversion. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or IX_ETH_DB_FAIL otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBWiFiFrameControlDurationIDUpdate(IxEthDBPortId portID) +{ + IxNpeMhMessage message; + IX_STATUS result; + + FILL_SETFRAMECONTROLDURATIONID(message, portID, ixEthDBPortInfo[portID].frameControlDurationID); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + return result; +} + +/** + * @brief sets the Duration/ID WiFi frame header conversion parameter + * + * @param portID ID of the port + * @param durationID 16-bit value containing the new Duration/ID parameter + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); + + ixEthDBPortInfo[portID].frameControlDurationID = (ixEthDBPortInfo[portID].frameControlDurationID & 0xFFFF0000) | durationID; + + return ixEthDBWiFiFrameControlDurationIDUpdate(portID); +} + +/** + * @brief sets the Frame Control WiFi frame header conversion parameter + * + * @param portID ID of the port + * @param durationID 16-bit value containing the new Frame Control parameter + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl) +{ + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); + + ixEthDBPortInfo[portID].frameControlDurationID = (ixEthDBPortInfo[portID].frameControlDurationID & 0xFFFF) | (frameControl << 16); + + return ixEthDBWiFiFrameControlDurationIDUpdate(portID); +} + +/** + * @brief removes a WiFi header conversion record + * + * @param portID ID of the port + * @param macAddr MAC address of the record to remove + * + * Note that this function is documented in the main + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + MacDescriptor recordTemplate; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); + + memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); + + recordTemplate.type = IX_ETH_DB_WIFI_RECORD; + recordTemplate.portID = portID; + + return ixEthDBRemove(&recordTemplate, NULL); +} + +/** + * @brief adds a WiFi header conversion record + * + * @param portID ID of the port + * @param macAddr MAC address of the record to add + * @param gatewayMacAddr address of the gateway (or + * NULL if this is a station record) + * + * This function adds a record of type AP_TO_AP (gateway is not NULL) + * or AP_TO_STA (gateway is NULL) in the main database as a + * WiFi header conversion record. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + * + * @internal + */ +IX_ETH_DB_PRIVATE +IxEthDBStatus ixEthDBWiFiEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) +{ + MacDescriptor recordTemplate; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_REFERENCE(macAddr); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); + + memcpy(recordTemplate.macAddress, macAddr, sizeof (IxEthDBMacAddr)); + + recordTemplate.type = IX_ETH_DB_WIFI_RECORD; + recordTemplate.portID = portID; + + if (gatewayMacAddr != NULL) + { + memcpy(recordTemplate.recordData.wifiData.gwMacAddress, gatewayMacAddr, sizeof (IxEthDBMacAddr)); + + recordTemplate.recordData.wifiData.type = IX_ETH_DB_WIFI_AP_TO_AP; + } + else + { + memset(recordTemplate.recordData.wifiData.gwMacAddress, 0, sizeof (IxEthDBMacAddr)); + + recordTemplate.recordData.wifiData.type = IX_ETH_DB_WIFI_AP_TO_STA; + } + + return ixEthDBAdd(&recordTemplate, NULL); +} + +/** + * @brief adds a WiFi header conversion record + * + * @param portID ID of the port + * @param macAddr MAC address of the record to add + * @param gatewayMacAddr address of the gateway + * + * This function adds a record of type AP_TO_AP + * in the main database as a WiFi header conversion record. + * + * This is simply a wrapper over @ref ixEthDBWiFiEntryAdd(). + * + * Note that this function is documented in the main + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) +{ + IX_ETH_DB_CHECK_REFERENCE(gatewayMacAddr); + + return ixEthDBWiFiEntryAdd(portID, macAddr, gatewayMacAddr); +} + +/** + * @brief adds a WiFi header conversion record + * + * @param portID ID of the port + * @param macAddr MAC address of the record to add + * + * This function adds a record of type AP_TO_STA + * in the main database as a WiFi header conversion record. + * + * This is simply a wrapper over @ref ixEthDBWiFiEntryAdd(). + * + * Note that this function is documented in the main + * component header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed + * successfully or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) +{ + return ixEthDBWiFiEntryAdd(portID, macAddr, NULL); +} + +/** + * @brief selects a set of gateways from a tree of + * WiFi header conversion records + * + * @param stations binary tree containing pointers to WiFi header + * conversion records + * + * This function browses through the input binary tree, identifies + * records of type AP_TO_AP, clones these records and appends them + * to a vine (a single right-branch binary tree) which is returned + * as result. A maximum of MAX_GW_SIZE entries containing gateways + * will be cloned from the original tree. + * + * @return vine (linear binary tree) containing record + * clones of AP_TO_AP type, which have a gateway field + * + * @internal + */ +IX_ETH_DB_PUBLIC +MacTreeNode *ixEthDBGatewaySelect(MacTreeNode *stations) +{ + MacTreeNodeStack *stack; + MacTreeNode *gateways, *insertionPlace; + UINT32 gwIndex = 1; /* skip the empty root */ + + if (stations == NULL) + { + return NULL; + } + + stack = ixOsalCacheDmaMalloc(sizeof (MacTreeNodeStack)); + + if (stack == NULL) + { + ERROR_LOG("DB: (WiFi) failed to allocate the node stack for gateway tree linearization, out of memory?\n"); + return NULL; + } + + /* initialize root node */ + gateways = insertionPlace = NULL; + + /* start browsing the station tree */ + NODE_STACK_INIT(stack); + + /* initialize stack by pushing the tree root at offset 0 */ + NODE_STACK_PUSH(stack, stations, 0); + + while (NODE_STACK_NONEMPTY(stack)) + { + MacTreeNode *node; + UINT32 offset; + + NODE_STACK_POP(stack, node, offset); + + /* we can store maximum 31 (32 total, 1 empty root) entries in the gateway tree */ + if (offset > (MAX_GW_SIZE - 1)) break; + + /* check if this record has a gateway address */ + if (node->descriptor != NULL && node->descriptor->recordData.wifiData.type == IX_ETH_DB_WIFI_AP_TO_AP) + { + /* found a record, create an insertion place */ + if (insertionPlace != NULL) + { + insertionPlace->right = ixEthDBAllocMacTreeNode(); + insertionPlace = insertionPlace->right; + } + else + { + gateways = ixEthDBAllocMacTreeNode(); + insertionPlace = gateways; + } + + if (insertionPlace == NULL) + { + /* no nodes left, bail out with what we have */ + ixOsalCacheDmaFree(stack); + return gateways; + } + + /* clone the original record for the gateway tree */ + insertionPlace->descriptor = ixEthDBCloneMacDescriptor(node->descriptor); + + /* insert and update the offset in the original record */ + node->descriptor->recordData.wifiData.gwAddressIndex = gwIndex++; + } + + /* browse the tree */ + if (node->left != NULL) + { + NODE_STACK_PUSH(stack, node->left, LEFT_CHILD_OFFSET(offset)); + } + + if (node->right != NULL) + { + NODE_STACK_PUSH(stack, node->right, RIGHT_CHILD_OFFSET(offset)); + } + } + + ixOsalCacheDmaFree(stack); + return gateways; +} + +/** + * @brief downloads the WiFi header conversion table to an NPE + * + * @param portID ID of the port + * + * This function prepares the WiFi header conversion tables and + * downloads them to the specified NPE port. + * + * The header conversion tables consist in the main table of + * addresses and the secondary table of gateways. AP_TO_AP records + * from the first table contain index fields into the second table + * for gateway selection. + * + * Note that this function is documented in the main component + * header file, IxEthDB.h. + * + * @return IX_ETH_DB_SUCCESS if the operation completed successfully + * or an appropriate error message otherwise + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID) +{ + IxEthDBPortMap query; + MacTreeNode *stations = NULL, *gateways = NULL, *gateway = NULL; + IxNpeMhMessage message; + PortInfo *portInfo; + IX_STATUS result; + + IX_ETH_DB_CHECK_PORT(portID); + + IX_ETH_DB_CHECK_SINGLE_NPE(portID); + + IX_ETH_DB_CHECK_FEATURE(portID, IX_ETH_DB_WIFI_HEADER_CONVERSION); + + portInfo = &ixEthDBPortInfo[portID]; + + SET_DEPENDENCY_MAP(query, portID); + + ixEthDBUpdateLock(); + + stations = ixEthDBQuery(NULL, query, IX_ETH_DB_WIFI_RECORD, MAX_ELT_SIZE); + gateways = ixEthDBGatewaySelect(stations); + + /* clean up gw area */ + memset((void *) portInfo->updateMethod.npeGwUpdateZone, FULL_GW_BYTE_SIZE, 0); + + /* write all gateways */ + gateway = gateways; + + while (gateway != NULL) + { + ixEthDBNPEGatewayNodeWrite((void *) (((UINT32) portInfo->updateMethod.npeGwUpdateZone) + + gateway->descriptor->recordData.wifiData.gwAddressIndex * ELT_ENTRY_SIZE), + gateway); + + gateway = gateway->right; + } + + /* free the gateway tree */ + if (gateways != NULL) + { + ixEthDBFreeMacTreeNode(gateways); + } + + FILL_SETAPMACTABLE_MSG(message, + IX_OSAL_MMU_VIRT_TO_PHYS(portInfo->updateMethod.npeGwUpdateZone)); + + IX_ETHDB_SEND_NPE_MSG(IX_ETH_DB_PORT_ID_TO_NPE(portID), message, result); + + if (result == IX_SUCCESS) + { + /* update the main tree (the stations tree) */ + portInfo->updateMethod.searchTree = stations; + + result = ixEthDBNPEUpdateHandler(portID, IX_ETH_DB_WIFI_RECORD); + } + + ixEthDBUpdateUnlock(); + + return result; +} diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c new file mode 100644 index 0000000000..4d92f17eef --- /dev/null +++ b/drivers/net/npe/IxEthMii.c @@ -0,0 +1,497 @@ +/** + * @file IxEthMii.c + * + * @author Intel Corporation + * @date + * + * @brief MII control functions + * + * Design Notes: + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" + +#include "IxEthAcc.h" +#include "IxEthMii_p.h" + +#ifdef __wince +#include "IxOsPrintf.h" +#endif + +/* Array to store the phy IDs of the discovered phys */ +PRIVATE UINT32 ixEthMiiPhyId[IXP425_ETH_ACC_MII_MAX_ADDR]; + +/********************************************************* + * + * Scan for PHYs on the MII bus. This function returns + * an array of booleans, one for each PHY address. + * If a PHY is found at a particular address, the + * corresponding entry in the array is set to TRUE. + * + */ + +PUBLIC IX_STATUS +ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) +{ + UINT32 i; + UINT16 regval, regvalId1, regvalId2; + + /*Search for PHYs on the MII*/ + /*Search for existant phys on the MDIO bus*/ + + if ((phyPresent == NULL) || + (maxPhyCount > IXP425_ETH_ACC_MII_MAX_ADDR)) + { + return IX_FAIL; + } + + /* fill the array */ + for(i=0; + i<IXP425_ETH_ACC_MII_MAX_ADDR; + i++) + { + phyPresent[i] = FALSE; + } + + /* iterate through the PHY addresses */ + for(i=0; + maxPhyCount > 0 && i<IXP425_ETH_ACC_MII_MAX_ADDR; + i++) + { + ixEthMiiPhyId[i] = IX_ETH_MII_INVALID_PHY_ID; + if(ixEthAccMiiReadRtn(i, + IX_ETH_MII_CTRL_REG, + ®val) == IX_ETH_ACC_SUCCESS) + { + if((regval & 0xffff) != 0xffff) + { + maxPhyCount--; + /*Need to read the register twice here to flush PHY*/ + ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID1_REG, ®valId1); + ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID1_REG, ®valId1); + ixEthAccMiiReadRtn(i, IX_ETH_MII_PHY_ID2_REG, ®valId2); + ixEthMiiPhyId[i] = (regvalId1 << IX_ETH_MII_REG_SHL) | regvalId2; + if ((ixEthMiiPhyId[i] == IX_ETH_MII_KS8995_PHY_ID) + || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT971_PHY_ID) + || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT972_PHY_ID) + || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973_PHY_ID) + || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT973A3_PHY_ID) + || (ixEthMiiPhyId[i] == IX_ETH_MII_LXT9785_PHY_ID) + ) + { + /* supported phy */ + phyPresent[i] = TRUE; + } /* end of if(ixEthMiiPhyId) */ + else + { + if (ixEthMiiPhyId[i] != IX_ETH_MII_INVALID_PHY_ID) + { + /* unsupported phy */ + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixEthMiiPhyScan : unexpected Mii PHY ID %8.8x\n", + ixEthMiiPhyId[i], 2, 3, 4, 5, 6); + ixEthMiiPhyId[i] = IX_ETH_MII_UNKNOWN_PHY_ID; + phyPresent[i] = TRUE; + } + } + } + } + } + return IX_SUCCESS; +} + +/************************************************************ + * + * Configure the PHY at the specified address + * + */ +PUBLIC IX_STATUS +ixEthMiiPhyConfig(UINT32 phyAddr, + BOOL speed100, + BOOL fullDuplex, + BOOL autonegotiate) +{ + UINT16 regval=0; + + /* parameter check */ + if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && + (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID)) + { + /* + * set the control register + */ + if(autonegotiate) + { + regval |= IX_ETH_MII_CR_AUTO_EN | IX_ETH_MII_CR_RESTART; + } + else + { + if(speed100) + { + regval |= IX_ETH_MII_CR_100; + } + if(fullDuplex) + { + regval |= IX_ETH_MII_CR_FDX; + } + } /* end of if-else() */ + if (ixEthAccMiiWriteRtn(phyAddr, + IX_ETH_MII_CTRL_REG, + regval) == IX_ETH_ACC_SUCCESS) + { + return IX_SUCCESS; + } + } /* end of if(phyAddr) */ + return IX_FAIL; +} + +/****************************************************************** + * + * Enable the PHY Loopback at the specified address + */ +PUBLIC IX_STATUS +ixEthMiiPhyLoopbackEnable (UINT32 phyAddr) +{ + UINT16 regval ; + + if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && + (IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr])) + { + /* read/write the control register */ + if(ixEthAccMiiReadRtn (phyAddr, + IX_ETH_MII_CTRL_REG, + ®val) + == IX_ETH_ACC_SUCCESS) + { + if(ixEthAccMiiWriteRtn (phyAddr, + IX_ETH_MII_CTRL_REG, + regval | IX_ETH_MII_CR_LOOPBACK) + == IX_ETH_ACC_SUCCESS) + { + return IX_SUCCESS; + } + } + } + return IX_FAIL; +} + +/****************************************************************** + * + * Disable the PHY Loopback at the specified address + */ +PUBLIC IX_STATUS +ixEthMiiPhyLoopbackDisable (UINT32 phyAddr) +{ + UINT16 regval ; + + if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && + (IX_ETH_MII_INVALID_PHY_ID != ixEthMiiPhyId[phyAddr])) + { + /* read/write the control register */ + if(ixEthAccMiiReadRtn (phyAddr, + IX_ETH_MII_CTRL_REG, + ®val) + == IX_ETH_ACC_SUCCESS) + { + if(ixEthAccMiiWriteRtn (phyAddr, + IX_ETH_MII_CTRL_REG, + regval & (~IX_ETH_MII_CR_LOOPBACK)) + == IX_ETH_ACC_SUCCESS) + { + return IX_SUCCESS; + } + } + } + return IX_FAIL; +} + +/****************************************************************** + * + * Reset the PHY at the specified address + */ +PUBLIC IX_STATUS +ixEthMiiPhyReset(UINT32 phyAddr) +{ + UINT32 timeout; + UINT16 regval; + + if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && + (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID)) + { + if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) || + (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) || + (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973_PHY_ID) || + (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT973A3_PHY_ID) || + (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID) + ) + { + /* use the control register to reset the phy */ + ixEthAccMiiWriteRtn(phyAddr, + IX_ETH_MII_CTRL_REG, + IX_ETH_MII_CR_RESET); + + /* poll until the reset bit is cleared */ + timeout = 0; + do + { + ixOsalSleep (IX_ETH_MII_RESET_POLL_MS); + + /* read the control register and check for timeout */ + ixEthAccMiiReadRtn(phyAddr, + IX_ETH_MII_CTRL_REG, + ®val); + if ((regval & IX_ETH_MII_CR_RESET) == 0) + { + /* timeout bit is self-cleared */ + break; + } + timeout += IX_ETH_MII_RESET_POLL_MS; + } + while (timeout < IX_ETH_MII_RESET_DELAY_MS); + + /* check for timeout */ + if (timeout >= IX_ETH_MII_RESET_DELAY_MS) + { + ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, + IX_ETH_MII_CR_NORM_EN); + return IX_FAIL; + } + + return IX_SUCCESS; + } /* end of if(ixEthMiiPhyId) */ + else if (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_KS8995_PHY_ID) + { + /* reset bit is reserved, just reset the control register */ + ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, + IX_ETH_MII_CR_NORM_EN); + return IX_SUCCESS; + } + else + { + /* unknown PHY, set the control register reset bit, + * wait 2 s. and clear the control register. + */ + ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, + IX_ETH_MII_CR_RESET); + + ixOsalSleep (IX_ETH_MII_RESET_DELAY_MS); + + ixEthAccMiiWriteRtn(phyAddr, IX_ETH_MII_CTRL_REG, + IX_ETH_MII_CR_NORM_EN); + return IX_SUCCESS; + } /* end of if-else(ixEthMiiPhyId) */ + } /* end of if(phyAddr) */ + return IX_FAIL; +} + +/***************************************************************** + * + * Link state query functions + */ + +PUBLIC IX_STATUS +ixEthMiiLinkStatus(UINT32 phyAddr, + BOOL *linkUp, + BOOL *speed100, + BOOL *fullDuplex, + BOOL *autoneg) +{ + UINT16 ctrlRegval, statRegval, regval, regval4, regval5; + + /* check the parameters */ + if ((linkUp == NULL) || + (speed100 == NULL) || + (fullDuplex == NULL) || + (autoneg == NULL)) + { + return IX_FAIL; + } + + *linkUp = FALSE; + *speed100 = FALSE; + *fullDuplex = FALSE; + *autoneg = FALSE; + + if ((phyAddr < IXP425_ETH_ACC_MII_MAX_ADDR) && + (ixEthMiiPhyId[phyAddr] != IX_ETH_MII_INVALID_PHY_ID)) + { + if ((ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT971_PHY_ID) || + (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT972_PHY_ID) || + (ixEthMiiPhyId[phyAddr] == IX_ETH_MII_LXT9785_PHY_ID) + ) + { + /* --------------------------------------------------*/ + /* Retrieve information from PHY specific register */ + /* --------------------------------------------------*/ + if (ixEthAccMiiReadRtn(phyAddr, + IX_ETH_MII_STAT2_REG, + ®val) != IX_ETH_ACC_SUCCESS) + { + return IX_FAIL; + } + *linkUp = ((regval & IX_ETH_MII_SR2_LINK) != 0); + *speed100 = ((regval & IX_ETH_MII_SR2_100) != 0); + *fullDuplex = ((regval & IX_ETH_MII_SR2_FD) != 0); + *autoneg = ((regval & IX_ETH_MII_SR2_AUTO) != 0); + return IX_SUCCESS; + } /* end of if(ixEthMiiPhyId) */ + else + { + /* ----------------------------------------------------*/ + /* Retrieve information from status and ctrl registers */ + /* ----------------------------------------------------*/ + if (ixEthAccMiiReadRtn(phyAddr, + IX_ETH_MII_CTRL_REG, + &ctrlRegval) != IX_ETH_ACC_SUCCESS) + { + return IX_FAIL; + } + ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &statRegval); + + *linkUp = ((statRegval & IX_ETH_MII_SR_LINK_STATUS) != 0); + if (*linkUp) + { + *autoneg = ((ctrlRegval & IX_ETH_MII_CR_AUTO_EN) != 0) && + ((statRegval & IX_ETH_MII_SR_AUTO_SEL) != 0) && + ((statRegval & IX_ETH_MII_SR_AUTO_NEG) != 0); + + if (*autoneg) + { + /* mask the current stat values with the capabilities */ + ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_ADS_REG, ®val4); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_AN_PRTN_REG, ®val5); + /* merge the flags from the 3 registers */ + regval = (statRegval & ((regval4 & regval5) << 6)); + /* initialise from status register values */ + if ((regval & IX_ETH_MII_SR_TX_FULL_DPX) != 0) + { + /* 100 Base X full dplx */ + *speed100 = TRUE; + *fullDuplex = TRUE; + return IX_SUCCESS; + } + if ((regval & IX_ETH_MII_SR_TX_HALF_DPX) != 0) + { + /* 100 Base X half dplx */ + *speed100 = TRUE; + return IX_SUCCESS; + } + if ((regval & IX_ETH_MII_SR_10T_FULL_DPX) != 0) + { + /* 10 mb full dplx */ + *fullDuplex = TRUE; + return IX_SUCCESS; + } + if ((regval & IX_ETH_MII_SR_10T_HALF_DPX) != 0) + { + /* 10 mb half dplx */ + return IX_SUCCESS; + } + } /* end of if(autoneg) */ + else + { + /* autonegotiate not complete, return setup parameters */ + *speed100 = ((ctrlRegval & IX_ETH_MII_CR_100) != 0); + *fullDuplex = ((ctrlRegval & IX_ETH_MII_CR_FDX) != 0); + } + } /* end of if(linkUp) */ + } /* end of if-else(ixEthMiiPhyId) */ + } /* end of if(phyAddr) */ + else + { + return IX_FAIL; + } /* end of if-else(phyAddr) */ + return IX_SUCCESS; +} + +/***************************************************************** + * + * Link state display functions + */ + +PUBLIC IX_STATUS +ixEthMiiPhyShow (UINT32 phyAddr) +{ + BOOL linkUp, speed100, fullDuplex, autoneg; + UINT16 cregval; + UINT16 sregval; + + + ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_STAT_REG, &sregval); + ixEthAccMiiReadRtn(phyAddr, IX_ETH_MII_CTRL_REG, &cregval); + + /* get link information */ + if (ixEthMiiLinkStatus(phyAddr, + &linkUp, + &speed100, + &fullDuplex, + &autoneg) != IX_ETH_ACC_SUCCESS) + { + printf("PHY Status unknown\n"); + return IX_FAIL; + } + + printf("PHY ID [phyAddr]: %8.8x\n",ixEthMiiPhyId[phyAddr]); + printf( " Status reg: %4.4x\n",sregval); + printf( " control reg: %4.4x\n",cregval); + /* display link information */ + printf("PHY Status:\n"); + printf(" Link is %s\n", + (linkUp ? "Up" : "Down")); + if((sregval & IX_ETH_MII_SR_REMOTE_FAULT) != 0) + { + printf(" Remote fault detected\n"); + } + printf(" Auto Negotiation %s\n", + (autoneg ? "Completed" : "Not Completed")); + + printf("PHY Configuration:\n"); + printf(" Speed %sMb/s\n", + (speed100 ? "100" : "10")); + printf(" %s Duplex\n", + (fullDuplex ? "Full" : "Half")); + printf(" Auto Negotiation %s\n", + (autoneg ? "Enabled" : "Disabled")); + return IX_SUCCESS; +} + diff --git a/drivers/net/npe/IxFeatureCtrl.c b/drivers/net/npe/IxFeatureCtrl.c new file mode 100644 index 0000000000..2e196a19aa --- /dev/null +++ b/drivers/net/npe/IxFeatureCtrl.c @@ -0,0 +1,422 @@ +/** + * @file IxFeatureCtrl.c + * + * @author Intel Corporation + * @date 29-Jan-2003 + * + * @brief Feature Control Public API Implementation + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#include "IxOsal.h" +#include "IxVersionId.h" +#include "IxFeatureCtrl.h" + +/* Macro to read from the Feature Control Register */ +#define IX_FEATURE_CTRL_READ(result) \ +do { \ +ixFeatureCtrlExpMap(); \ +(result) = IX_OSAL_READ_LONG(ixFeatureCtrlRegister); \ +} while (0) + +/* Macro to write to the Feature Control Register */ +#define IX_FEATURE_CTRL_WRITE(value) \ +do { \ +ixFeatureCtrlExpMap(); \ +IX_OSAL_WRITE_LONG(ixFeatureCtrlRegister, (value)); \ +} while (0) + +/* + * This is the offset of the feature register relative to the base of the + * Expansion Bus Controller MMR. + */ +#define IX_FEATURE_CTRL_REG_OFFSET (0x00000028) + + +/* Boolean to mark the fact that the EXP_CONFIG address space was mapped */ +PRIVATE BOOL ixFeatureCtrlExpCfgRegionMapped = FALSE; + +/* Pointer holding the virtual address of the Feature Control Register */ +PRIVATE VUINT32 *ixFeatureCtrlRegister = NULL; + +/* Place holder to store the software configuration */ +PRIVATE BOOL swConfiguration[IX_FEATURECTRL_SWCONFIG_MAX]; + +/* Flag to control swConfiguration[] is initialized once */ +PRIVATE BOOL swConfigurationFlag = FALSE ; + +/* Array containing component mask values */ +#ifdef __ixp42X +UINT32 componentMask[IX_FEATURECTRL_MAX_COMPONENTS] = { + (0x1<<IX_FEATURECTRL_RCOMP), + (0x1<<IX_FEATURECTRL_USB), + (0x1<<IX_FEATURECTRL_HASH), + (0x1<<IX_FEATURECTRL_AES), + (0x1<<IX_FEATURECTRL_DES), + (0x1<<IX_FEATURECTRL_HDLC), + (0x1<<IX_FEATURECTRL_AAL), + (0x1<<IX_FEATURECTRL_HSS), + (0x1<<IX_FEATURECTRL_UTOPIA), + (0x1<<IX_FEATURECTRL_ETH0), + (0x1<<IX_FEATURECTRL_ETH1), + (0x1<<IX_FEATURECTRL_NPEA), + (0x1<<IX_FEATURECTRL_NPEB), + (0x1<<IX_FEATURECTRL_NPEC), + (0x1<<IX_FEATURECTRL_PCI), + IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE, + (0x3<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT), + (0x1<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2), + IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE, + IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE, + IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE, + IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE, + IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE +}; +#elif defined (__ixp46X) +UINT32 componentMask[IX_FEATURECTRL_MAX_COMPONENTS] = { + (0x1<<IX_FEATURECTRL_RCOMP), + (0x1<<IX_FEATURECTRL_USB), + (0x1<<IX_FEATURECTRL_HASH), + (0x1<<IX_FEATURECTRL_AES), + (0x1<<IX_FEATURECTRL_DES), + (0x1<<IX_FEATURECTRL_HDLC), + IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE, /* AAL component is always on */ + (0x1<<IX_FEATURECTRL_HSS), + (0x1<<IX_FEATURECTRL_UTOPIA), + (0x1<<IX_FEATURECTRL_ETH0), + (0x1<<IX_FEATURECTRL_ETH1), + (0x1<<IX_FEATURECTRL_NPEA), + (0x1<<IX_FEATURECTRL_NPEB), + (0x1<<IX_FEATURECTRL_NPEC), + (0x1<<IX_FEATURECTRL_PCI), + (0x1<<IX_FEATURECTRL_ECC_TIMESYNC), + (0x3<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT), + (0x1<<IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2), /* NOT TO BE USED */ + (0x1<<IX_FEATURECTRL_USB_HOST_CONTROLLER), + (0x1<<IX_FEATURECTRL_NPEA_ETH), + (0x1<<IX_FEATURECTRL_NPEB_ETH), + (0x1<<IX_FEATURECTRL_RSA), + (0x3<<IX_FEATURECTRL_XSCALE_MAX_FREQ), + (0x1<<IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2) +}; +#endif /* __ixp42X */ + +/** + * Forward declaration + */ +PRIVATE +void ixFeatureCtrlExpMap(void); + +PRIVATE +void ixFeatureCtrlSwConfigurationInit(void); + +/** + * Function to map EXP_CONFIG space + */ +PRIVATE +void ixFeatureCtrlExpMap(void) +{ + UINT32 expCfgBaseAddress = 0; + + /* If the EXP Configuration space has already been mapped then + * return */ + if (ixFeatureCtrlExpCfgRegionMapped == TRUE) + { + return; + } + + /* Map (get virtual address) for the EXP_CONFIG space */ + expCfgBaseAddress = (UINT32) + (IX_OSAL_MEM_MAP(IX_OSAL_IXP400_EXP_BUS_REGS_PHYS_BASE, + IX_OSAL_IXP400_EXP_REG_MAP_SIZE)); + + /* Assert that the mapping operation succeeded */ + IX_OSAL_ASSERT(expCfgBaseAddress); + + /* Set the address of the Feature register */ + ixFeatureCtrlRegister = + (VUINT32 *) (expCfgBaseAddress + IX_FEATURE_CTRL_REG_OFFSET); + + /* Mark the fact that the EXP_CONFIG space has already been mapped */ + ixFeatureCtrlExpCfgRegionMapped = TRUE; +} + +/** + * Function definition: ixFeatureCtrlSwConfigurationInit + * This function will only initialize software configuration once. + */ +PRIVATE void ixFeatureCtrlSwConfigurationInit(void) +{ + UINT32 i; + if (FALSE == swConfigurationFlag) + { + for (i=0; i<IX_FEATURECTRL_SWCONFIG_MAX ; i++) + { + /* By default, all software configuration are enabled */ + swConfiguration[i]= TRUE ; + } + /*Make sure this function only initializes swConfiguration[] once*/ + swConfigurationFlag = TRUE ; + } +} + +/** + * Function definition: ixFeatureCtrlRead + */ +IxFeatureCtrlReg +ixFeatureCtrlRead (void) +{ + IxFeatureCtrlReg result; + +#if CPU!=SIMSPARCSOLARIS + /* Read the feature control register */ + IX_FEATURE_CTRL_READ(result); + return result; +#else + /* Return an invalid value for VxWorks simulation */ + result = 0xFFFFFFFF; + return result; +#endif +} + +/** + * Function definition: ixFeatureCtrlWrite + */ +void +ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg) +{ +#if CPU!=SIMSPARCSOLARIS + /* Write value to feature control register */ + IX_FEATURE_CTRL_WRITE(expUnitReg); +#endif +} + + +/** + * Function definition: ixFeatureCtrlHwCapabilityRead + */ +IxFeatureCtrlReg +ixFeatureCtrlHwCapabilityRead (void) +{ + IxFeatureCtrlReg currentReg, hwCapability; + + /* Capture a copy of feature control register */ + currentReg = ixFeatureCtrlRead(); + + /* Try to enable all hardware components. + * Only software disable hardware can be enabled again */ + ixFeatureCtrlWrite(0); + + /* Read feature control register to know the hardware capability. */ + hwCapability = ixFeatureCtrlRead(); + + /* Restore initial feature control value */ + ixFeatureCtrlWrite(currentReg); + + /* return Hardware Capability */ + return hwCapability; +} + + +/** + * Function definition: ixFeatureCtrlComponentCheck + */ +IX_STATUS +ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType) +{ + IxFeatureCtrlReg expUnitReg; + UINT32 mask = 0; + + /* Lookup mask of component */ + mask=componentMask[componentType]; + + /* Check if mask is available or not */ + if(IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE == mask) + { + return IX_FEATURE_CTRL_COMPONENT_DISABLED; + } + + if(IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE == mask) + { + return IX_FEATURE_CTRL_COMPONENT_ENABLED; + } + + /* Read feature control register to know current hardware capability. */ + expUnitReg = ixFeatureCtrlRead(); + + /* For example: To check for Hashing Coprocessor (bit-2) + * expUniteg = 0x0010 + * ~expUnitReg = 0x1101 + * componentType = 0x0100 + * ~expUnitReg & componentType = 0x0100 (Not zero) + */ + + /* + * Inverse the bit value because available component is 0 in value + */ + expUnitReg = ~expUnitReg ; + + if (expUnitReg & mask) + { + return (IX_FEATURE_CTRL_COMPONENT_ENABLED); + } + else + { + return (IX_FEATURE_CTRL_COMPONENT_DISABLED); + } +} + + +/** + * Function definition: ixFeatureCtrlProductIdRead + */ +IxFeatureCtrlProductId +ixFeatureCtrlProductIdRead () +{ +#if CPU!=SIMSPARCSOLARIS + IxFeatureCtrlProductId pdId = 0 ; + + /* Use ARM instruction to move register0 from coprocessor to ARM register */ + +#ifndef __wince + __asm__("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(pdId) :); +#else + +#ifndef IN_KERNEL + BOOL mode; +#endif + extern IxFeatureCtrlProductId AsmixFeatureCtrlProductIdRead(); + +#ifndef IN_KERNEL + mode = SetKMode(TRUE); +#endif + pdId = AsmixFeatureCtrlProductIdRead(); +#ifndef IN_KERNEL + SetKMode(mode); +#endif + +#endif + return (pdId); +#else + /* Return an invalid value for VxWorks simulation */ + return 0xffffffff; +#endif +} + +/** + * Function definition: ixFeatureCtrlDeviceRead + */ +IxFeatureCtrlDeviceId +ixFeatureCtrlDeviceRead () +{ + return ((ixFeatureCtrlProductIdRead() >> IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET) + & IX_FEATURE_CTRL_DEVICE_TYPE_MASK); +} /* End function ixFeatureCtrlDeviceRead */ + + +/** + * Function definition: ixFeatureCtrlSwConfigurationCheck + */ +IX_STATUS +ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) +{ + if (swConfigType >= IX_FEATURECTRL_SWCONFIG_MAX) + { + ixOsalLog(IX_OSAL_LOG_LVL_WARNING, + IX_OSAL_LOG_DEV_STDOUT, + "FeatureCtrl: Invalid software configuraiton input.\n", + 0, 0, 0, 0, 0, 0); + + return IX_FEATURE_CTRL_SWCONFIG_DISABLED; + } + + /* The function will only initialize once. */ + ixFeatureCtrlSwConfigurationInit(); + + /* Check and return software configuration */ + return ((swConfiguration[(UINT32)swConfigType] == TRUE) ? IX_FEATURE_CTRL_SWCONFIG_ENABLED: IX_FEATURE_CTRL_SWCONFIG_DISABLED); +} + +/** + * Function definition: ixFeatureCtrlSwConfigurationWrite + */ +void +ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled) +{ + if (swConfigType >= IX_FEATURECTRL_SWCONFIG_MAX) + { + ixOsalLog(IX_OSAL_LOG_LVL_WARNING, + IX_OSAL_LOG_DEV_STDOUT, + "FeatureCtrl: Invalid software configuraiton input.\n", + 0, 0, 0, 0, 0, 0); + + return; + } + + /* The function will only initialize once. */ + ixFeatureCtrlSwConfigurationInit(); + + /* Write software configuration */ + swConfiguration[(UINT32)swConfigType]=enabled ; +} + +/** + * Function definition: ixFeatureCtrlIxp400SwVersionShow + */ +void +ixFeatureCtrlIxp400SwVersionShow (void) +{ + printf ("\nIXP400 Software Release %s %s\n\n", IX_VERSION_ID, IX_VERSION_INTERNAL_ID); + +} + +/** + * Function definition: ixFeatureCtrlSoftwareBuildGet + */ +IxFeatureCtrlBuildDevice +ixFeatureCtrlSoftwareBuildGet (void) +{ + #ifdef __ixp42X + return IX_FEATURE_CTRL_SW_BUILD_IXP42X; + #else + return IX_FEATURE_CTRL_SW_BUILD_IXP46X; + #endif +} diff --git a/drivers/net/npe/IxNpeDl.c b/drivers/net/npe/IxNpeDl.c new file mode 100644 index 0000000000..3738337538 --- /dev/null +++ b/drivers/net/npe/IxNpeDl.c @@ -0,0 +1,940 @@ +/** + * @file IxNpeDl.c + * + * @author Intel Corporation + * @date 08 January 2002 + * + * @brief This file contains the implementation of the public API for the + * IXP425 NPE Downloader component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required + */ + +/* + * Put the user defined include files required + */ +#include "IxNpeDl.h" +#include "IxNpeDlImageMgr_p.h" +#include "IxNpeDlNpeMgr_p.h" +#include "IxNpeDlMacros_p.h" +#include "IxFeatureCtrl.h" +#include "IxOsal.h" +/* + * #defines used in this file + */ + #define IMAGEID_MAJOR_NUMBER_DEFAULT 0 + #define IMAGEID_MINOR_NUMBER_DEFAULT 0 + +/* + * Typedefs whose scope is limited to this file. + */ +typedef struct +{ + BOOL validImage; + IxNpeDlImageId imageId; +} IxNpeDlNpeState; + +/* module statistics counters */ +typedef struct +{ + UINT32 attemptedDownloads; + UINT32 successfulDownloads; + UINT32 criticalFailDownloads; +} IxNpeDlStats; + +/* + * Variable declarations global to this file only. Externs are followed + * by static variables. + */ +static IxNpeDlNpeState ixNpeDlNpeState[IX_NPEDL_NPEID_MAX] = +{ + {FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, + {FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}}, + {FALSE, {IX_NPEDL_NPEID_MAX, 0, 0, 0}} +}; + +static IxNpeDlStats ixNpeDlStats; + +/* + * Software guard to prevent NPE from being started multiple times. + */ +static BOOL ixNpeDlNpeStarted[IX_NPEDL_NPEID_MAX] ={FALSE, FALSE, FALSE} ; + + +/* + * static function prototypes. + */ +PRIVATE IX_STATUS +ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, UINT32 imageId); + +/* + * Function definition: ixNpeDlImageDownload + */ +PUBLIC IX_STATUS +ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, + BOOL verify) +{ + UINT32 imageSize; + UINT32 *imageCodePtr = NULL; + IX_STATUS status; + IxNpeDlNpeId npeId = imageIdPtr->npeId; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlImageDownload\n"); + + ixNpeDlStats.attemptedDownloads++; + + /* Check input parameters */ + if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0)) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageDownload - invalid parameter\n"); + } + else + { + /* Ensure initialisation has been completed */ + ixNpeDlNpeMgrInit(); + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if (npeId == IX_NPEDL_NPEID_NPEA) + { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" + " not exist\n"); + return IX_SUCCESS; + } + } /* end of if(npeId) */ + else if (npeId == IX_NPEDL_NPEID_NPEB) + { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified" + " does not exist\n"); + return IX_SUCCESS; + } + } /* end of elseif(npeId) */ + else if (npeId == IX_NPEDL_NPEID_NPEC) + { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified" + " does not exist\n"); + return IX_SUCCESS; + } + } /* end of elseif(npeId) */ + } /* end of if(IX_FEATURE_CTRL_SILICON_TYPE_B0) */ /*End of Silicon Type Check*/ + + /* stop and reset the NPE */ + if (IX_SUCCESS != ixNpeDlNpeStopAndReset (npeId)) + { + IX_NPEDL_ERROR_REPORT ("Failed to stop and reset NPE\n"); + return IX_FAIL; + } + + /* Locate image */ + status = ixNpeDlImageMgrImageLocate (imageIdPtr, &imageCodePtr, + &imageSize); + if (IX_SUCCESS == status) + { + /* + * If download was successful, store image Id in list of + * currently loaded images. If a critical error occured + * during download, record that the NPE has an invalid image + */ + status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, + verify); + if (IX_SUCCESS == status) + { + ixNpeDlNpeState[npeId].imageId = *imageIdPtr; + ixNpeDlNpeState[npeId].validImage = TRUE; + ixNpeDlStats.successfulDownloads++; + + status = ixNpeDlNpeExecutionStart (npeId); + } + else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) || + (status == IX_NPEDL_CRITICAL_MICROCODE_ERR)) + { + ixNpeDlNpeState[npeId].imageId = *imageIdPtr; + ixNpeDlNpeState[npeId].validImage = FALSE; + ixNpeDlStats.criticalFailDownloads++; + } + } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */ + } /* end of if-else(npeId) */ /* condition: parameter checks ok */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlImageDownload : status = %d\n", status); + return status; +} + +/* + * Function definition: ixNpeDlAvailableImagesCountGet + */ +PUBLIC IX_STATUS +ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr) +{ + IX_STATUS status; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlAvailableImagesCountGet\n"); + + /* Check input parameters */ + if (numImagesPtr == NULL) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlAvailableImagesCountGet - " + "invalid parameter\n"); + } + else + { + /* + * Use ImageMgr module to get no. of images listed in Image Library Header. + * If NULL is passed as imageListPtr parameter to following function, + * it will only fill number of images into numImagesPtr + */ + status = ixNpeDlImageMgrImageListExtract (NULL, numImagesPtr); + } /* end of if-else(numImagesPtr) */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlAvailableImagesCountGet : " + "status = %d\n", status); + return status; +} + +/* + * Function definition: ixNpeDlAvailableImagesListGet + */ +PUBLIC IX_STATUS +ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr, + UINT32 *listSizePtr) +{ + IX_STATUS status; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlAvailableImagesListGet\n"); + + /* Check input parameters */ + if ((imageIdListPtr == NULL) || (listSizePtr == NULL)) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlAvailableImagesListGet - " + "invalid parameter\n"); + } + else + { + /* Call ImageMgr to get list of images listed in Image Library Header */ + status = ixNpeDlImageMgrImageListExtract (imageIdListPtr, + listSizePtr); + } /* end of if-else(imageIdListPtr) */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlAvailableImagesListGet : status = %d\n", + status); + return status; +} + +/* + * Function definition: ixNpeDlLoadedImageGet + */ +PUBLIC IX_STATUS +ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId, + IxNpeDlImageId *imageIdPtr) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlLoadedImageGet\n"); + + /* Check input parameters */ + if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0) || (imageIdPtr == NULL)) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageGet - invalid parameter\n"); + } + else + { + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if (npeId == IX_NPEDL_NPEID_NPEA && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" + " not exist\n"); + return IX_SUCCESS; + } /* end of if(npeId) */ + + if (npeId == IX_NPEDL_NPEID_NPEB && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified does" + " not exist\n"); + return IX_SUCCESS; + } /* end of if(npeId) */ + + if (npeId == IX_NPEDL_NPEID_NPEC && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified does" + " not exist\n"); + return IX_SUCCESS; + } /* end of if(npeId) */ + } /* end of if not IXP42x-A0 silicon */ + + if (ixNpeDlNpeState[npeId].validImage) + { + /* use npeId to get imageId from list of currently loaded + images */ + *imageIdPtr = ixNpeDlNpeState[npeId].imageId; + } + else + { + status = IX_FAIL; + } /* end of if-else(ixNpeDlNpeState) */ + } /* end of if-else(npeId) */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlLoadedImageGet : status = %d\n", + status); + return status; +} + +/* + * Function definition: ixNpeDlLatestImageGet + */ +PUBLIC IX_STATUS +ixNpeDlLatestImageGet ( + IxNpeDlNpeId npeId, + IxNpeDlFunctionalityId functionalityId, + IxNpeDlImageId *imageIdPtr) +{ + IX_STATUS status; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlLatestImageGet\n"); + + /* Check input parameters */ + if ((npeId >= IX_NPEDL_NPEID_MAX) || + (npeId < 0) || + (imageIdPtr == NULL)) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlLatestImageGet - " + "invalid parameter\n"); + } /* end of if(npeId) */ + else + { + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if (npeId == IX_NPEDL_NPEID_NPEA && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" + " not exist\n"); + return IX_SUCCESS; + } /* end of if(npeId) */ + + if (npeId == IX_NPEDL_NPEID_NPEB && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified does" + " not exist\n"); + return IX_SUCCESS; + } /* end of if(npeId) */ + + if (npeId == IX_NPEDL_NPEID_NPEC && + (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC) == + IX_FEATURE_CTRL_COMPONENT_DISABLED)) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified does" + " not exist\n"); + return IX_SUCCESS; + } /* end of if(npeId) */ + } /* end of if not IXP42x-A0 silicon */ + + imageIdPtr->npeId = npeId; + imageIdPtr->functionalityId = functionalityId; + imageIdPtr->major = IMAGEID_MAJOR_NUMBER_DEFAULT; + imageIdPtr->minor = IMAGEID_MINOR_NUMBER_DEFAULT; + /* Call ImageMgr to get list of images listed in Image Library Header */ + status = ixNpeDlImageMgrLatestImageExtract(imageIdPtr); + } /* end of if-else(npeId) */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlLatestImageGet : status = %d\n", + status); + + return status; +} + +/* + * Function definition: ixNpeDlNpeStopAndReset + */ +PUBLIC IX_STATUS +ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeStopAndReset\n"); + + /* Ensure initialisation has been completed */ + ixNpeDlNpeMgrInit(); + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + /* + * Check whether NPE is present + */ + if (IX_NPEDL_NPEID_NPEA == npeId) + { + /* Check whether NPE A is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE A does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEA does not present.\n"); + return IX_SUCCESS; + } + } /* end of if(IX_NPEDL_NPEID_NPEA) */ + else if (IX_NPEDL_NPEID_NPEB == npeId) + { + /* Check whether NPE B is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE B does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEB does not present.\n"); + return IX_SUCCESS; + } + } /* end of elseif(IX_NPEDL_NPEID_NPEB) */ + else if (IX_NPEDL_NPEID_NPEC == npeId) + { + /* Check whether NPE C is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE C does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeStopAndReset - Warning:NPEC does not present.\n"); + return IX_SUCCESS; + } + } /* end of elseif(IX_NPEDL_NPEID_NPEC) */ + else + { + /* Invalid NPE ID */ + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeStopAndReset - invalid Npe ID\n"); + status = IX_NPEDL_PARAM_ERR; + } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ + } /* end of if not IXP42x-A0 Silicon */ + + if (status == IX_SUCCESS) + { + /* call NpeMgr function to stop the NPE */ + status = ixNpeDlNpeMgrNpeStop (npeId); + if (status == IX_SUCCESS) + { + /* call NpeMgr function to reset the NPE */ + status = ixNpeDlNpeMgrNpeReset (npeId); + } + } /* end of if(status) */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeStopAndReset : status = %d\n", status); + + if (IX_SUCCESS == status) + { + /* Indicate NPE has been stopped */ + ixNpeDlNpeStarted[npeId] = FALSE ; + } + + return status; +} + +/* + * Function definition: ixNpeDlNpeExecutionStart + */ +PUBLIC IX_STATUS +ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeExecutionStart\n"); + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + /* + * Check whether NPE is present + */ + if (IX_NPEDL_NPEID_NPEA == npeId) + { + /* Check whether NPE A is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE A does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEA does not present.\n"); + return IX_SUCCESS; + } + } /* end of if(IX_NPEDL_NPEID_NPEA) */ + else if (IX_NPEDL_NPEID_NPEB == npeId) + { + /* Check whether NPE B is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE B does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEB does not present.\n"); + return IX_SUCCESS; + } + } /* end of elseif(IX_NPEDL_NPEID_NPEB) */ + else if (IX_NPEDL_NPEID_NPEC == npeId) + { + /* Check whether NPE C is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE C does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStart - Warning:NPEC does not present.\n"); + return IX_SUCCESS; + } + } /* end of elseif(IX_NPEDL_NPEID_NPEC) */ + else + { + /* Invalid NPE ID */ + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeExecutionStart - invalid Npe ID\n"); + return IX_NPEDL_PARAM_ERR; + } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ + } /* end of if not IXP42x-A0 Silicon */ + + if (TRUE == ixNpeDlNpeStarted[npeId]) + { + /* NPE has been started. */ + return IX_SUCCESS ; + } + + /* Ensure initialisation has been completed */ + ixNpeDlNpeMgrInit(); + + /* call NpeMgr function to start the NPE */ + status = ixNpeDlNpeMgrNpeStart (npeId); + + if (IX_SUCCESS == status) + { + /* Indicate NPE has started */ + ixNpeDlNpeStarted[npeId] = TRUE ; + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeExecutionStart : status = %d\n", + status); + + return status; +} + +/* + * Function definition: ixNpeDlNpeExecutionStop + */ +PUBLIC IX_STATUS +ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeExecutionStop\n"); + + /* Ensure initialisation has been completed */ + ixNpeDlNpeMgrInit(); + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + /* + * Check whether NPE is present + */ + if (IX_NPEDL_NPEID_NPEA == npeId) + { + /* Check whether NPE A is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE A does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEA does not present.\n"); + return IX_SUCCESS; + } + } /* end of if(IX_NPEDL_NPEID_NPEA) */ + else if (IX_NPEDL_NPEID_NPEB == npeId) + { + /* Check whether NPE B is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE B does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEB does not present.\n"); + return IX_SUCCESS; + } + } /* end of elseif(IX_NPEDL_NPEID_NPEB) */ + else if (IX_NPEDL_NPEID_NPEC == npeId) + { + /* Check whether NPE C is present */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + /* NPE C does not present */ + IX_NPEDL_WARNING_REPORT ("ixNpeDlNpeExecutionStop - Warning:NPEC does not present.\n"); + return IX_SUCCESS; + } + } /* end of elseif(IX_NPEDL_NPEID_NPEC) */ + else + { + /* Invalid NPE ID */ + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeExecutionStop - invalid Npe ID\n"); + status = IX_NPEDL_PARAM_ERR; + } /* end of if-else(IX_NPEDL_NPEID_NPEC) */ + } /* end of if not IXP42X-AO Silicon */ + + if (status == IX_SUCCESS) + { + /* call NpeMgr function to stop the NPE */ + status = ixNpeDlNpeMgrNpeStop (npeId); + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeExecutionStop : status = %d\n", + status); + + if (IX_SUCCESS == status) + { + /* Indicate NPE has been stopped */ + ixNpeDlNpeStarted[npeId] = FALSE ; + } + + return status; +} + +/* + * Function definition: ixNpeDlUnload + */ +PUBLIC IX_STATUS +ixNpeDlUnload (void) +{ + IX_STATUS status; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlUnload\n"); + + status = ixNpeDlNpeMgrUninit(); + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlUnload : status = %d\n", + status); + return status; +} + +/* + * Function definition: ixNpeDlStatsShow + */ +PUBLIC void +ixNpeDlStatsShow (void) +{ + ixOsalLog (IX_OSAL_LOG_LVL_USER, + IX_OSAL_LOG_DEV_STDOUT, + "\nixNpeDlStatsShow:\n" + "\tDownloads Attempted by user: %u\n" + "\tSuccessful Downloads: %u\n" + "\tFailed Downloads (due to Critical Error): %u\n\n", + ixNpeDlStats.attemptedDownloads, + ixNpeDlStats.successfulDownloads, + ixNpeDlStats.criticalFailDownloads, + 0,0,0); + + ixNpeDlImageMgrStatsShow (); + ixNpeDlNpeMgrStatsShow (); +} + +/* + * Function definition: ixNpeDlStatsReset + */ +PUBLIC void +ixNpeDlStatsReset (void) +{ + ixNpeDlStats.attemptedDownloads = 0; + ixNpeDlStats.successfulDownloads = 0; + ixNpeDlStats.criticalFailDownloads = 0; + + ixNpeDlImageMgrStatsReset (); + ixNpeDlNpeMgrStatsReset (); +} + +/* + * Function definition: ixNpeDlNpeInitAndStartInternal + */ +PRIVATE IX_STATUS +ixNpeDlNpeInitAndStartInternal (UINT32 *imageLibrary, + UINT32 imageId) +{ + UINT32 imageSize; + UINT32 *imageCodePtr = NULL; + IX_STATUS status; + IxNpeDlNpeId npeId = IX_NPEDL_NPEID_FROM_IMAGEID_GET(imageId); + IxFeatureCtrlDeviceId deviceId = IX_NPEDL_DEVICEID_FROM_IMAGEID_GET(imageId); + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeInitAndStartInternal\n"); + + ixNpeDlStats.attemptedDownloads++; + + /* Check input parameter device correctness */ + if ((deviceId >= IX_FEATURE_CTRL_DEVICE_TYPE_MAX) || + (deviceId < IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X)) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - " + "invalid parameter\n"); + } /* End valid device id checking */ + + /* Check input parameters */ + else if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0)) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - " + "invalid parameter\n"); + } + + else + { + /* Ensure initialisation has been completed */ + ixNpeDlNpeMgrInit(); + + /* Checking if image being loaded is meant for device that is running. + * Image is forward compatible. i.e Image built for IXP42X should run + * on IXP46X but not vice versa.*/ + if (deviceId > (ixFeatureCtrlDeviceRead() & IX_FEATURE_CTRL_DEVICE_TYPE_MASK)) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeInitAndStartInternal - " + "Device type mismatch. NPE Image not " + "meant for device in use \n"); + return IX_NPEDL_DEVICE_ERR; + }/* if statement - matching image device and current device */ + + /* If not IXP42X A0 stepping, proceed to check for existence of npe's */ + if ((IX_FEATURE_CTRL_SILICON_TYPE_A0 != + (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK)) + || (IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X != ixFeatureCtrlDeviceRead ())) + { + if (npeId == IX_NPEDL_NPEID_NPEA) + { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEA) == + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE A component you specified does" + " not exist\n"); + return IX_SUCCESS; + } + } /* end of if(npeId) */ + else if (npeId == IX_NPEDL_NPEID_NPEB) + { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEB)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE B component you specified" + " does not exist\n"); + return IX_SUCCESS; + } + } /* end of elseif(npeId) */ + else if (npeId == IX_NPEDL_NPEID_NPEC) + { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_NPEC)== + IX_FEATURE_CTRL_COMPONENT_DISABLED) + { + IX_NPEDL_WARNING_REPORT("Warning: the NPE C component you specified" + " does not exist\n"); + return IX_SUCCESS; + } + } /* end of elseif(npeId) */ + } /* end of if not IXP42X-A0 Silicon */ + + /* stop and reset the NPE */ + status = ixNpeDlNpeStopAndReset (npeId); + if (IX_SUCCESS != status) + { + IX_NPEDL_ERROR_REPORT ("Failed to stop and reset NPE\n"); + return status; + } + + /* Locate image */ + status = ixNpeDlImageMgrImageFind (imageLibrary, imageId, + &imageCodePtr, &imageSize); + if (IX_SUCCESS == status) + { + /* + * If download was successful, store image Id in list of + * currently loaded images. If a critical error occured + * during download, record that the NPE has an invalid image + */ + status = ixNpeDlNpeMgrImageLoad (npeId, imageCodePtr, TRUE); + if (IX_SUCCESS == status) + { + ixNpeDlNpeState[npeId].validImage = TRUE; + ixNpeDlStats.successfulDownloads++; + + status = ixNpeDlNpeExecutionStart (npeId); + } + else if ((status == IX_NPEDL_CRITICAL_NPE_ERR) || + (status == IX_NPEDL_CRITICAL_MICROCODE_ERR)) + { + ixNpeDlNpeState[npeId].validImage = FALSE; + ixNpeDlStats.criticalFailDownloads++; + } + + /* NOTE - The following section of code is here to support + * a deprecated function ixNpeDlLoadedImageGet(). When that + * function is removed from the API, this code should be revised. + */ + ixNpeDlNpeState[npeId].imageId.npeId = npeId; + ixNpeDlNpeState[npeId].imageId.functionalityId = + IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET(imageId); + ixNpeDlNpeState[npeId].imageId.major = + IX_NPEDL_MAJOR_FROM_IMAGEID_GET(imageId); + ixNpeDlNpeState[npeId].imageId.minor = + IX_NPEDL_MINOR_FROM_IMAGEID_GET(imageId); + } /* end of if(IX_SUCCESS) */ /* condition: image located successfully in microcode image */ + } /* end of if-else(npeId-deviceId) */ /* condition: parameter checks ok */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeInitAndStartInternal : " + "status = %d\n", status); + return status; +} + +/* + * Function definition: ixNpeDlCustomImageNpeInitAndStart + */ +PUBLIC IX_STATUS +ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary, + UINT32 imageId) +{ + IX_STATUS status; + + if (imageLibrary == NULL) + { + status = IX_NPEDL_PARAM_ERR; + IX_NPEDL_ERROR_REPORT ("ixNpeDlCustomImageNpeInitAndStart " + "- invalid parameter\n"); + } + else + { + status = ixNpeDlNpeInitAndStartInternal (imageLibrary, imageId); + } /* end of if-else(imageLibrary) */ + + return status; +} + +/* + * Function definition: ixNpeDlNpeInitAndStart + */ +PUBLIC IX_STATUS +ixNpeDlNpeInitAndStart (UINT32 imageId) +{ + return ixNpeDlNpeInitAndStartInternal (NULL, imageId); +} + +/* + * Function definition: ixNpeDlLoadedImageFunctionalityGet + */ +PUBLIC IX_STATUS +ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId, + UINT8 *functionalityId) +{ + /* Check input parameters */ + if ((npeId >= IX_NPEDL_NPEID_MAX) || (npeId < 0)) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageFunctionalityGet " + "- invalid parameter\n"); + return IX_NPEDL_PARAM_ERR; + } + if (functionalityId == NULL) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlLoadedImageFunctionalityGet " + "- invalid parameter\n"); + return IX_NPEDL_PARAM_ERR; + } + + if (ixNpeDlNpeState[npeId].validImage) + { + *functionalityId = ixNpeDlNpeState[npeId].imageId.functionalityId; + return IX_SUCCESS; + } + else + { + return IX_FAIL; + } +} diff --git a/drivers/net/npe/IxNpeDlImageMgr.c b/drivers/net/npe/IxNpeDlImageMgr.c new file mode 100644 index 0000000000..9bcdc9c0d8 --- /dev/null +++ b/drivers/net/npe/IxNpeDlImageMgr.c @@ -0,0 +1,687 @@ +/** + * @file IxNpeDlImageMgr.c + * + * @author Intel Corporation + * @date 09 January 2002 + * + * @brief This file contains the implementation of the private API for the + * IXP425 NPE Downloader ImageMgr module + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +/* + * Put the system defined include files required. + */ +#include "IxOsal.h" + +/* + * Put the user defined include files required. + */ +#include "IxNpeDlImageMgr_p.h" +#include "IxNpeDlMacros_p.h" + +/* + * define the flag which toggles the firmare inclusion + */ +#define IX_NPE_MICROCODE_FIRMWARE_INCLUDED 1 +#include "IxNpeMicrocode.h" + +/* + * Indicates the start of an NPE Image, in new NPE Image Library format. + * 2 consecutive occurances indicates the end of the NPE Image Library + */ +#define NPE_IMAGE_MARKER 0xfeedf00d + +/* + * Typedefs whose scope is limited to this file. + */ + +/* + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * TO BE DEPRECATED IN A FUTURE RELEASE + */ +typedef struct +{ + UINT32 size; + UINT32 offset; + UINT32 id; +} IxNpeDlImageMgrImageEntry; + +/* + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * TO BE DEPRECATED IN A FUTURE RELEASE + */ +typedef union +{ + IxNpeDlImageMgrImageEntry image; + UINT32 eohMarker; +} IxNpeDlImageMgrHeaderEntry; + +/* + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * TO BE DEPRECATED IN A FUTURE RELEASE + */ +typedef struct +{ + UINT32 signature; + /* 1st entry in the header (there may be more than one) */ + IxNpeDlImageMgrHeaderEntry entry[1]; +} IxNpeDlImageMgrImageLibraryHeader; + + +/* + * NPE Image Header definition, used in new NPE Image Library format + */ +typedef struct +{ + UINT32 marker; + UINT32 id; + UINT32 size; +} IxNpeDlImageMgrImageHeader; + +/* module statistics counters */ +typedef struct +{ + UINT32 invalidSignature; + UINT32 imageIdListOverflow; + UINT32 imageIdNotFound; +} IxNpeDlImageMgrStats; + + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ +static IxNpeDlImageMgrStats ixNpeDlImageMgrStats; + +static UINT32* getIxNpeMicroCodeImageLibrary(void) +{ + char *s; + + if ((s = getenv("npe_ucode")) != NULL) + return (UINT32*) simple_strtoul(s, NULL, 16); + else + return NULL; +} + +/* + * static function prototypes. + */ +PRIVATE BOOL +ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary); + +PRIVATE void +ixNpeDlImageMgrImageIdFormat (UINT32 rawImageId, IxNpeDlImageId *imageId); + +PRIVATE BOOL +ixNpeDlImageMgrImageIdCompare (IxNpeDlImageId *imageIdA, + IxNpeDlImageId *imageIdB); + +PRIVATE BOOL +ixNpeDlImageMgrNpeFunctionIdCompare (IxNpeDlImageId *imageIdA, + IxNpeDlImageId *imageIdB); + +#if 0 +PRIVATE IX_STATUS +ixNpeDlImageMgrImageFind_legacy (UINT32 *imageLibrary, + UINT32 imageId, + UINT32 **imagePtr, + UINT32 *imageSize); + +/* + * Function definition: ixNpeDlImageMgrMicrocodeImageLibraryOverride + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +IX_STATUS +ixNpeDlImageMgrMicrocodeImageLibraryOverride ( + UINT32 *clientImageLibrary) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlImageMgrMicrocodeImageLibraryOverride\n"); + + if (ixNpeDlImageMgrSignatureCheck (clientImageLibrary)) + { + IxNpeMicroCodeImageLibrary = clientImageLibrary; + } + else + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrMicrocodeImageLibraryOverride: " + "Client-supplied image has invalid signature\n"); + status = IX_FAIL; + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlImageMgrMicrocodeImageLibraryOverride: status = %d\n", + status); + return status; +} +#endif + +/* + * Function definition: ixNpeDlImageMgrImageListExtract + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +IX_STATUS +ixNpeDlImageMgrImageListExtract ( + IxNpeDlImageId *imageListPtr, + UINT32 *numImages) +{ + UINT32 rawImageId; + IxNpeDlImageId formattedImageId; + IX_STATUS status = IX_SUCCESS; + UINT32 imageCount = 0; + IxNpeDlImageMgrImageLibraryHeader *header; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlImageMgrImageListExtract\n"); + + header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary(); + + if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary())) + { + /* for each image entry in the image header ... */ + while (header->entry[imageCount].eohMarker != + IX_NPEDL_IMAGEMGR_END_OF_HEADER) + { + /* + * if the image list container from calling function has capacity, + * add the image id to the list + */ + if ((imageListPtr != NULL) && (imageCount < *numImages)) + { + rawImageId = header->entry[imageCount].image.id; + ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId); + imageListPtr[imageCount] = formattedImageId; + } + /* imageCount reflects no. of image entries in image library header */ + imageCount++; + } + + /* + * if image list container from calling function was too small to + * contain all image ids in the header, set return status to FAIL + */ + if ((imageListPtr != NULL) && (imageCount > *numImages)) + { + status = IX_FAIL; + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageListExtract: " + "number of Ids found exceeds list capacity\n"); + ixNpeDlImageMgrStats.imageIdListOverflow++; + } + /* return number of image ids found in image library header */ + *numImages = imageCount; + } + else + { + status = IX_FAIL; + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageListExtract: " + "invalid signature in image\n"); + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlImageMgrImageListExtract: status = %d\n", + status); + return status; +} + + +/* + * Function definition: ixNpeDlImageMgrImageLocate + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +IX_STATUS +ixNpeDlImageMgrImageLocate ( + IxNpeDlImageId *imageId, + UINT32 **imagePtr, + UINT32 *imageSize) +{ + UINT32 imageOffset; + UINT32 rawImageId; + IxNpeDlImageId formattedImageId; + /* used to index image entries in image library header */ + UINT32 imageCount = 0; + IX_STATUS status = IX_FAIL; + IxNpeDlImageMgrImageLibraryHeader *header; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlImageMgrImageLocate\n"); + + header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary(); + + if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary())) + { + /* for each image entry in the image library header ... */ + while (header->entry[imageCount].eohMarker != + IX_NPEDL_IMAGEMGR_END_OF_HEADER) + { + rawImageId = header->entry[imageCount].image.id; + ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId); + /* if a match for imageId is found in the image library header... */ + if (ixNpeDlImageMgrImageIdCompare (imageId, &formattedImageId)) + { + /* + * get pointer to the image in the image library using offset from + * 1st word in image library + */ + UINT32 *tmp=getIxNpeMicroCodeImageLibrary(); + imageOffset = header->entry[imageCount].image.offset; + *imagePtr = &tmp[imageOffset]; + /* get the image size */ + *imageSize = header->entry[imageCount].image.size; + status = IX_SUCCESS; + break; + } + imageCount++; + } + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageLocate: " + "imageId not found in image library header\n"); + ixNpeDlImageMgrStats.imageIdNotFound++; + } + } + else + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageLocate: " + "invalid signature in image library\n"); + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlImageMgrImageLocate: status = %d\n", status); + return status; +} + +/* + * Function definition: ixNpeDlImageMgrLatestImageExtract + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +IX_STATUS +ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId) +{ + UINT32 imageCount = 0; + UINT32 rawImageId; + IxNpeDlImageId formattedImageId; + IX_STATUS status = IX_FAIL; + IxNpeDlImageMgrImageLibraryHeader *header; + + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlImageMgrLatestImageExtract\n"); + + header = (IxNpeDlImageMgrImageLibraryHeader *) getIxNpeMicroCodeImageLibrary(); + + if (ixNpeDlImageMgrSignatureCheck (getIxNpeMicroCodeImageLibrary())) + { + /* for each image entry in the image library header ... */ + while (header->entry[imageCount].eohMarker != + IX_NPEDL_IMAGEMGR_END_OF_HEADER) + { + rawImageId = header->entry[imageCount].image.id; + ixNpeDlImageMgrImageIdFormat (rawImageId, &formattedImageId); + /* + * if a match for the npe Id and functionality Id of the imageId is + * found in the image library header... + */ + if(ixNpeDlImageMgrNpeFunctionIdCompare(imageId, &formattedImageId)) + { + if(imageId->major <= formattedImageId.major) + { + if(imageId->minor < formattedImageId.minor) + { + imageId->minor = formattedImageId.minor; + } + imageId->major = formattedImageId.major; + } + status = IX_SUCCESS; + } + imageCount++; + } + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrLatestImageExtract: " + "imageId not found in image library header\n"); + ixNpeDlImageMgrStats.imageIdNotFound++; + } + } + else + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrLatestImageGet: " + "invalid signature in image library\n"); + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlImageMgrLatestImageGet: status = %d\n", status); + return status; +} + +/* + * Function definition: ixNpeDlImageMgrSignatureCheck + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +PRIVATE BOOL +ixNpeDlImageMgrSignatureCheck (UINT32 *microCodeImageLibrary) +{ + IxNpeDlImageMgrImageLibraryHeader *header = + (IxNpeDlImageMgrImageLibraryHeader *) microCodeImageLibrary; + BOOL result = TRUE; + + if (!header || header->signature != IX_NPEDL_IMAGEMGR_SIGNATURE) + { + result = FALSE; + ixNpeDlImageMgrStats.invalidSignature++; + } + + return result; +} + + +/* + * Function definition: ixNpeDlImageMgrImageIdFormat + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +PRIVATE void +ixNpeDlImageMgrImageIdFormat ( + UINT32 rawImageId, + IxNpeDlImageId *imageId) +{ + imageId->npeId = (rawImageId >> + IX_NPEDL_IMAGEID_NPEID_OFFSET) & + IX_NPEDL_NPEIMAGE_FIELD_MASK; + imageId->functionalityId = (rawImageId >> + IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET) & + IX_NPEDL_NPEIMAGE_FIELD_MASK; + imageId->major = (rawImageId >> + IX_NPEDL_IMAGEID_MAJOR_OFFSET) & + IX_NPEDL_NPEIMAGE_FIELD_MASK; + imageId->minor = (rawImageId >> + IX_NPEDL_IMAGEID_MINOR_OFFSET) & + IX_NPEDL_NPEIMAGE_FIELD_MASK; + +} + + +/* + * Function definition: ixNpeDlImageMgrImageIdCompare + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +PRIVATE BOOL +ixNpeDlImageMgrImageIdCompare ( + IxNpeDlImageId *imageIdA, + IxNpeDlImageId *imageIdB) +{ + if ((imageIdA->npeId == imageIdB->npeId) && + (imageIdA->functionalityId == imageIdB->functionalityId) && + (imageIdA->major == imageIdB->major) && + (imageIdA->minor == imageIdB->minor)) + { + return TRUE; + } + else + { + return FALSE; + } +} + +/* + * Function definition: ixNpeDlImageMgrNpeFunctionIdCompare + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +PRIVATE BOOL +ixNpeDlImageMgrNpeFunctionIdCompare ( + IxNpeDlImageId *imageIdA, + IxNpeDlImageId *imageIdB) +{ + if ((imageIdA->npeId == imageIdB->npeId) && + (imageIdA->functionalityId == imageIdB->functionalityId)) + { + return TRUE; + } + else + { + return FALSE; + } +} + + +/* + * Function definition: ixNpeDlImageMgrStatsShow + */ +void +ixNpeDlImageMgrStatsShow (void) +{ + ixOsalLog (IX_OSAL_LOG_LVL_USER, + IX_OSAL_LOG_DEV_STDOUT, + "\nixNpeDlImageMgrStatsShow:\n" + "\tInvalid Image Signatures: %u\n" + "\tImage Id List capacity too small: %u\n" + "\tImage Id not found: %u\n\n", + ixNpeDlImageMgrStats.invalidSignature, + ixNpeDlImageMgrStats.imageIdListOverflow, + ixNpeDlImageMgrStats.imageIdNotFound, + 0,0,0); +} + + +/* + * Function definition: ixNpeDlImageMgrStatsReset + */ +void +ixNpeDlImageMgrStatsReset (void) +{ + ixNpeDlImageMgrStats.invalidSignature = 0; + ixNpeDlImageMgrStats.imageIdListOverflow = 0; + ixNpeDlImageMgrStats.imageIdNotFound = 0; +} + + +#if 0 +/* + * Function definition: ixNpeDlImageMgrImageFind_legacy + * + * FOR BACKWARD-COMPATIBILITY WITH OLD NPE IMAGE LIBRARY FORMAT + * AND/OR LEGACY API FUNCTIONS. TO BE DEPRECATED IN A FUTURE RELEASE + */ +PRIVATE IX_STATUS +ixNpeDlImageMgrImageFind_legacy ( + UINT32 *imageLibrary, + UINT32 imageId, + UINT32 **imagePtr, + UINT32 *imageSize) +{ + UINT32 imageOffset; + /* used to index image entries in image library header */ + UINT32 imageCount = 0; + IX_STATUS status = IX_FAIL; + IxNpeDlImageMgrImageLibraryHeader *header; + BOOL imageFound = FALSE; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlImageMgrImageFind\n"); + + + /* If user didn't specify a library to use, use the default + * one from IxNpeMicrocode.h + */ + if (imageLibrary == NULL) + { + imageLibrary = IxNpeMicroCodeImageLibrary; + } + + if (ixNpeDlImageMgrSignatureCheck (imageLibrary)) + { + header = (IxNpeDlImageMgrImageLibraryHeader *) imageLibrary; + + /* for each image entry in the image library header ... */ + while ((header->entry[imageCount].eohMarker != + IX_NPEDL_IMAGEMGR_END_OF_HEADER) && !(imageFound)) + { + /* if a match for imageId is found in the image library header... */ + if (imageId == header->entry[imageCount].image.id) + { + /* + * get pointer to the image in the image library using offset from + * 1st word in image library + */ + imageOffset = header->entry[imageCount].image.offset; + *imagePtr = &imageLibrary[imageOffset]; + /* get the image size */ + *imageSize = header->entry[imageCount].image.size; + status = IX_SUCCESS; + imageFound = TRUE; + } + imageCount++; + } + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " + "imageId not found in image library header\n"); + ixNpeDlImageMgrStats.imageIdNotFound++; + } + } + else + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " + "invalid signature in image library\n"); + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlImageMgrImageFind: status = %d\n", status); + return status; +} +#endif + +/* + * Function definition: ixNpeDlImageMgrImageFind + */ +IX_STATUS +ixNpeDlImageMgrImageFind ( + UINT32 *imageLibrary, + UINT32 imageId, + UINT32 **imagePtr, + UINT32 *imageSize) +{ + IxNpeDlImageMgrImageHeader *image; + UINT32 offset = 0; + + /* If user didn't specify a library to use, use the default + * one from IxNpeMicrocode.h + */ + if (imageLibrary == NULL) + { +#ifdef IX_NPEDL_READ_MICROCODE_FROM_FILE + if (ixNpeMicrocode_binaryArray == NULL) + { + printk (KERN_ERR "ixp400.o: ERROR, no Microcode found in memory\n"); + return IX_FAIL; + } + else + { + imageLibrary = ixNpeMicrocode_binaryArray; + } +#else + imageLibrary = getIxNpeMicroCodeImageLibrary(); + if (imageLibrary == NULL) + { + printf ("npe: ERROR, no Microcode found in memory\n"); + return IX_FAIL; + } +#endif /* IX_NPEDL_READ_MICROCODE_FROM_FILE */ + } + +#if 0 + /* For backward's compatibility with previous image format */ + if (ixNpeDlImageMgrSignatureCheck(imageLibrary)) + { + return ixNpeDlImageMgrImageFind_legacy(imageLibrary, + imageId, + imagePtr, + imageSize); + } +#endif + + while (*(imageLibrary+offset) == NPE_IMAGE_MARKER) + { + image = (IxNpeDlImageMgrImageHeader *)(imageLibrary+offset); + offset += sizeof(IxNpeDlImageMgrImageHeader)/sizeof(UINT32); + + if (image->id == imageId) + { + *imagePtr = imageLibrary + offset; + *imageSize = image->size; + return IX_SUCCESS; + } + /* 2 consecutive NPE_IMAGE_MARKER's indicates end of library */ + else if (image->id == NPE_IMAGE_MARKER) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " + "imageId not found in image library header\n"); + ixNpeDlImageMgrStats.imageIdNotFound++; + /* reached end of library, image not found */ + return IX_FAIL; + } + offset += image->size; + } + + /* If we get here, our image library may be corrupted */ + IX_NPEDL_ERROR_REPORT ("ixNpeDlImageMgrImageFind: " + "image library format may be invalid or corrupted\n"); + return IX_FAIL; +} + diff --git a/drivers/net/npe/IxNpeDlNpeMgr.c b/drivers/net/npe/IxNpeDlNpeMgr.c new file mode 100644 index 0000000000..a9ea8bc103 --- /dev/null +++ b/drivers/net/npe/IxNpeDlNpeMgr.c @@ -0,0 +1,931 @@ +/** + * @file IxNpeDlNpeMgr.c + * + * @author Intel Corporation + * @date 09 January 2002 + * + * @brief This file contains the implementation of the private API for the + * IXP425 NPE Downloader NpeMgr module + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +/* + * Put the user defined include files required. + */ +#include "IxOsal.h" +#include "IxNpeDl.h" +#include "IxNpeDlNpeMgr_p.h" +#include "IxNpeDlNpeMgrUtils_p.h" +#include "IxNpeDlNpeMgrEcRegisters_p.h" +#include "IxNpeDlMacros_p.h" +#include "IxFeatureCtrl.h" + +/* + * #defines and macros used in this file. + */ +#define IX_NPEDL_BYTES_PER_WORD 4 + +/* used to read download map from version in microcode image */ +#define IX_NPEDL_BLOCK_TYPE_INSTRUCTION 0x00000000 +#define IX_NPEDL_BLOCK_TYPE_DATA 0x00000001 +#define IX_NPEDL_BLOCK_TYPE_STATE 0x00000002 +#define IX_NPEDL_END_OF_DOWNLOAD_MAP 0x0000000F + +/* + * masks used to extract address info from State information context + * register addresses as read from microcode image + */ +#define IX_NPEDL_MASK_STATE_ADDR_CTXT_REG 0x0000000F +#define IX_NPEDL_MASK_STATE_ADDR_CTXT_NUM 0x000000F0 + +/* LSB offset of Context Number field in State-Info Context Address */ +#define IX_NPEDL_OFFSET_STATE_ADDR_CTXT_NUM 4 + +/* size (in words) of single State Information entry (ctxt reg address|data) */ +#define IX_NPEDL_STATE_INFO_ENTRY_SIZE 2 + + + #define IX_NPEDL_RESET_NPE_PARITY 0x0800 + #define IX_NPEDL_PARITY_BIT_MASK 0x3F00FFFF + #define IX_NPEDL_CONFIG_CTRL_REG_MASK 0x3F3FFFFF + + +/* + * Typedefs whose scope is limited to this file. + */ + +typedef struct +{ + UINT32 type; + UINT32 offset; +} IxNpeDlNpeMgrDownloadMapBlockEntry; + +typedef union +{ + IxNpeDlNpeMgrDownloadMapBlockEntry block; + UINT32 eodmMarker; +} IxNpeDlNpeMgrDownloadMapEntry; + +typedef struct +{ + /* 1st entry in the download map (there may be more than one) */ + IxNpeDlNpeMgrDownloadMapEntry entry[1]; +} IxNpeDlNpeMgrDownloadMap; + + +/* used to access an instruction or data block in a microcode image */ +typedef struct +{ + UINT32 npeMemAddress; + UINT32 size; + UINT32 data[1]; +} IxNpeDlNpeMgrCodeBlock; + +/* used to access each Context Reg entry state-information block */ +typedef struct +{ + UINT32 addressInfo; + UINT32 value; +} IxNpeDlNpeMgrStateInfoCtxtRegEntry; + +/* used to access a state-information block in a microcode image */ +typedef struct +{ + UINT32 size; + IxNpeDlNpeMgrStateInfoCtxtRegEntry ctxtRegEntry[1]; +} IxNpeDlNpeMgrStateInfoBlock; + +/* used to store some useful NPE information for easy access */ +typedef struct +{ + UINT32 baseAddress; + UINT32 insMemSize; + UINT32 dataMemSize; +} IxNpeDlNpeInfo; + +/* used to distinguish instruction and data memory operations */ +typedef enum +{ + IX_NPEDL_MEM_TYPE_INSTRUCTION = 0, + IX_NPEDL_MEM_TYPE_DATA +} IxNpeDlNpeMemType; + +/* used to hold a reset value for a particular ECS register */ +typedef struct +{ + UINT32 regAddr; + UINT32 regResetVal; +} IxNpeDlEcsRegResetValue; + +/* prototype of function to write either Instruction or Data memory */ +typedef IX_STATUS (*IxNpeDlNpeMgrMemWrite) (UINT32 npeBaseAddress, + UINT32 npeMemAddress, + UINT32 npeMemData, + BOOL verify); + +/* module statistics counters */ +typedef struct +{ + UINT32 instructionBlocksLoaded; + UINT32 dataBlocksLoaded; + UINT32 stateInfoBlocksLoaded; + UINT32 criticalNpeErrors; + UINT32 criticalMicrocodeErrors; + UINT32 npeStarts; + UINT32 npeStops; + UINT32 npeResets; +} IxNpeDlNpeMgrStats; + + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ +static IxNpeDlNpeInfo ixNpeDlNpeInfo[] = +{ + { + 0, + IX_NPEDL_INS_MEMSIZE_WORDS_NPEA, + IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA + }, + { + 0, + IX_NPEDL_INS_MEMSIZE_WORDS_NPEB, + IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB + }, + { + 0, + IX_NPEDL_INS_MEMSIZE_WORDS_NPEC, + IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC + } +}; + +/* contains Reset values for Context Store Registers */ +static UINT32 ixNpeDlCtxtRegResetValues[] = +{ + IX_NPEDL_CTXT_REG_RESET_STEVT, + IX_NPEDL_CTXT_REG_RESET_STARTPC, + IX_NPEDL_CTXT_REG_RESET_REGMAP, + IX_NPEDL_CTXT_REG_RESET_CINDEX, +}; + +/* contains Reset values for Context Store Registers */ +static IxNpeDlEcsRegResetValue ixNpeDlEcsRegResetValues[] = +{ + {IX_NPEDL_ECS_BG_CTXT_REG_0, IX_NPEDL_ECS_BG_CTXT_REG_0_RESET}, + {IX_NPEDL_ECS_BG_CTXT_REG_1, IX_NPEDL_ECS_BG_CTXT_REG_1_RESET}, + {IX_NPEDL_ECS_BG_CTXT_REG_2, IX_NPEDL_ECS_BG_CTXT_REG_2_RESET}, + {IX_NPEDL_ECS_PRI_1_CTXT_REG_0, IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET}, + {IX_NPEDL_ECS_PRI_1_CTXT_REG_1, IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET}, + {IX_NPEDL_ECS_PRI_1_CTXT_REG_2, IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET}, + {IX_NPEDL_ECS_PRI_2_CTXT_REG_0, IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET}, + {IX_NPEDL_ECS_PRI_2_CTXT_REG_1, IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET}, + {IX_NPEDL_ECS_PRI_2_CTXT_REG_2, IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET}, + {IX_NPEDL_ECS_DBG_CTXT_REG_0, IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET}, + {IX_NPEDL_ECS_DBG_CTXT_REG_1, IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET}, + {IX_NPEDL_ECS_DBG_CTXT_REG_2, IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET}, + {IX_NPEDL_ECS_INSTRUCT_REG, IX_NPEDL_ECS_INSTRUCT_REG_RESET} +}; + +static IxNpeDlNpeMgrStats ixNpeDlNpeMgrStats; + +/* Set when NPE register memory has been mapped */ +static BOOL ixNpeDlMemInitialised = FALSE; + + +/* + * static function prototypes. + */ +PRIVATE IX_STATUS +ixNpeDlNpeMgrMemLoad (IxNpeDlNpeId npeId, UINT32 npeBaseAddress, + IxNpeDlNpeMgrCodeBlock *codeBlockPtr, + BOOL verify, IxNpeDlNpeMemType npeMemType); +PRIVATE IX_STATUS +ixNpeDlNpeMgrStateInfoLoad (UINT32 npeBaseAddress, + IxNpeDlNpeMgrStateInfoBlock *codeBlockPtr, + BOOL verify); +PRIVATE BOOL +ixNpeDlNpeMgrBitsSetCheck (UINT32 npeBaseAddress, UINT32 regOffset, + UINT32 expectedBitsSet); + +PRIVATE UINT32 +ixNpeDlNpeMgrBaseAddressGet (IxNpeDlNpeId npeId); + +/* + * Function definition: ixNpeDlNpeMgrBaseAddressGet + */ +PRIVATE UINT32 +ixNpeDlNpeMgrBaseAddressGet (IxNpeDlNpeId npeId) +{ + IX_OSAL_ASSERT (ixNpeDlMemInitialised); + return ixNpeDlNpeInfo[npeId].baseAddress; +} + + +/* + * Function definition: ixNpeDlNpeMgrInit + */ +void +ixNpeDlNpeMgrInit (void) +{ + /* Only map the memory once */ + if (!ixNpeDlMemInitialised) + { + UINT32 virtAddr; + + /* map the register memory for NPE-A */ + virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEA, + IX_OSAL_IXP400_NPEA_MAP_SIZE); + IX_OSAL_ASSERT(virtAddr); + ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress = virtAddr; + + /* map the register memory for NPE-B */ + virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEB, + IX_OSAL_IXP400_NPEB_MAP_SIZE); + IX_OSAL_ASSERT(virtAddr); + ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = virtAddr; + + /* map the register memory for NPE-C */ + virtAddr = (UINT32) IX_OSAL_MEM_MAP (IX_NPEDL_NPEBASEADDRESS_NPEC, + IX_OSAL_IXP400_NPEC_MAP_SIZE); + IX_OSAL_ASSERT(virtAddr); + ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = virtAddr; + + ixNpeDlMemInitialised = TRUE; + } +} + + +/* + * Function definition: ixNpeDlNpeMgrUninit + */ +IX_STATUS +ixNpeDlNpeMgrUninit (void) +{ + if (!ixNpeDlMemInitialised) + { + return IX_FAIL; + } + + IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress); + IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress); + IX_OSAL_MEM_UNMAP (ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress); + + ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEA].baseAddress = 0; + ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEB].baseAddress = 0; + ixNpeDlNpeInfo[IX_NPEDL_NPEID_NPEC].baseAddress = 0; + + ixNpeDlMemInitialised = FALSE; + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeDlNpeMgrImageLoad + */ +IX_STATUS +ixNpeDlNpeMgrImageLoad ( + IxNpeDlNpeId npeId, + UINT32 *imageCodePtr, + BOOL verify) +{ + UINT32 npeBaseAddress; + IxNpeDlNpeMgrDownloadMap *downloadMap; + UINT32 *blockPtr; + UINT32 mapIndex = 0; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrImageLoad\n"); + + /* get base memory address of NPE from npeId */ + npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); + + /* check execution status of NPE to verify NPE Stop was successful */ + if (!ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, + IX_NPEDL_EXCTL_STATUS_STOP)) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrImageDownload - " + "NPE was not stopped before download\n"); + status = IX_FAIL; + } + else + { + /* + * Read Download Map, checking each block type and calling + * appropriate function to perform download + */ + downloadMap = (IxNpeDlNpeMgrDownloadMap *) imageCodePtr; + while ((downloadMap->entry[mapIndex].eodmMarker != + IX_NPEDL_END_OF_DOWNLOAD_MAP) + && (status == IX_SUCCESS)) + { + /* calculate pointer to block to be downloaded */ + blockPtr = imageCodePtr + + downloadMap->entry[mapIndex].block.offset; + + switch (downloadMap->entry[mapIndex].block.type) + { + case IX_NPEDL_BLOCK_TYPE_INSTRUCTION: + status = ixNpeDlNpeMgrMemLoad (npeId, npeBaseAddress, + (IxNpeDlNpeMgrCodeBlock *)blockPtr, + verify, + IX_NPEDL_MEM_TYPE_INSTRUCTION); + break; + case IX_NPEDL_BLOCK_TYPE_DATA: + status = ixNpeDlNpeMgrMemLoad (npeId, npeBaseAddress, + (IxNpeDlNpeMgrCodeBlock *)blockPtr, + verify, IX_NPEDL_MEM_TYPE_DATA); + break; + case IX_NPEDL_BLOCK_TYPE_STATE: + status = ixNpeDlNpeMgrStateInfoLoad (npeBaseAddress, + (IxNpeDlNpeMgrStateInfoBlock *) blockPtr, + verify); + break; + default: + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrImageLoad: " + "unknown block type in download map\n"); + status = IX_NPEDL_CRITICAL_MICROCODE_ERR; + ixNpeDlNpeMgrStats.criticalMicrocodeErrors++; + break; + } + mapIndex++; + }/* loop: for each entry in download map, while status == SUCCESS */ + }/* condition: NPE stopped before attempting download */ + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrImageLoad : status = %d\n", + status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrMemLoad + */ +PRIVATE IX_STATUS +ixNpeDlNpeMgrMemLoad ( + IxNpeDlNpeId npeId, + UINT32 npeBaseAddress, + IxNpeDlNpeMgrCodeBlock *blockPtr, + BOOL verify, + IxNpeDlNpeMemType npeMemType) +{ + UINT32 npeMemAddress; + UINT32 blockSize; + UINT32 memSize = 0; + IxNpeDlNpeMgrMemWrite memWriteFunc = NULL; + UINT32 localIndex = 0; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrMemLoad\n"); + + /* + * select NPE EXCTL reg read/write commands depending on memory + * type (instruction/data) to be accessed + */ + if (npeMemType == IX_NPEDL_MEM_TYPE_INSTRUCTION) + { + memSize = ixNpeDlNpeInfo[npeId].insMemSize; + memWriteFunc = (IxNpeDlNpeMgrMemWrite) ixNpeDlNpeMgrInsMemWrite; + } + else if (npeMemType == IX_NPEDL_MEM_TYPE_DATA) + { + memSize = ixNpeDlNpeInfo[npeId].dataMemSize; + memWriteFunc = (IxNpeDlNpeMgrMemWrite) ixNpeDlNpeMgrDataMemWrite; + } + + /* + * NPE memory is loaded contiguously from each block, so only address + * of 1st word in block is needed + */ + npeMemAddress = blockPtr->npeMemAddress; + /* number of words of instruction/data microcode in block to download */ + blockSize = blockPtr->size; + if ((npeMemAddress + blockSize) > memSize) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrMemLoad: " + "Block size too big for NPE memory\n"); + status = IX_NPEDL_CRITICAL_MICROCODE_ERR; + ixNpeDlNpeMgrStats.criticalMicrocodeErrors++; + } + else + { + for (localIndex = 0; localIndex < blockSize; localIndex++) + { + status = memWriteFunc (npeBaseAddress, npeMemAddress, + blockPtr->data[localIndex], verify); + + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrMemLoad: " + "write to NPE memory failed\n"); + status = IX_NPEDL_CRITICAL_NPE_ERR; + ixNpeDlNpeMgrStats.criticalNpeErrors++; + break; /* abort download */ + } + /* increment target (word)address in NPE memory */ + npeMemAddress++; + } + }/* condition: block size will fit in NPE memory */ + + if (status == IX_SUCCESS) + { + if (npeMemType == IX_NPEDL_MEM_TYPE_INSTRUCTION) + { + ixNpeDlNpeMgrStats.instructionBlocksLoaded++; + } + else if (npeMemType == IX_NPEDL_MEM_TYPE_DATA) + { + ixNpeDlNpeMgrStats.dataBlocksLoaded++; + } + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrMemLoad : status = %d\n", status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrStateInfoLoad + */ +PRIVATE IX_STATUS +ixNpeDlNpeMgrStateInfoLoad ( + UINT32 npeBaseAddress, + IxNpeDlNpeMgrStateInfoBlock *blockPtr, + BOOL verify) +{ + UINT32 blockSize; + UINT32 ctxtRegAddrInfo; + UINT32 ctxtRegVal; + IxNpeDlCtxtRegNum ctxtReg; /* identifies Context Store reg (0-3) */ + UINT32 ctxtNum; /* identifies Context number (0-16) */ + UINT32 i; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrStateInfoLoad\n"); + + /* block size contains number of words of state-info in block */ + blockSize = blockPtr->size; + + ixNpeDlNpeMgrDebugInstructionPreExec (npeBaseAddress); + + /* for each state-info context register entry in block */ + for (i = 0; i < (blockSize/IX_NPEDL_STATE_INFO_ENTRY_SIZE); i++) + { + /* each state-info entry is 2 words (address, value) in length */ + ctxtRegAddrInfo = (blockPtr->ctxtRegEntry[i]).addressInfo; + ctxtRegVal = (blockPtr->ctxtRegEntry[i]).value; + + ctxtReg = (ctxtRegAddrInfo & IX_NPEDL_MASK_STATE_ADDR_CTXT_REG); + ctxtNum = (ctxtRegAddrInfo & IX_NPEDL_MASK_STATE_ADDR_CTXT_NUM) >> + IX_NPEDL_OFFSET_STATE_ADDR_CTXT_NUM; + + /* error-check Context Register No. and Context Number values */ + /* NOTE that there is no STEVT register for Context 0 */ + if ((ctxtReg < 0) || + (ctxtReg >= IX_NPEDL_CTXT_REG_MAX) || + (ctxtNum > IX_NPEDL_CTXT_NUM_MAX) || + ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STEVT))) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrStateInfoLoad: " + "invalid Context Register Address\n"); + status = IX_NPEDL_CRITICAL_MICROCODE_ERR; + ixNpeDlNpeMgrStats.criticalMicrocodeErrors++; + break; /* abort download */ + } + + status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum, ctxtReg, + ctxtRegVal, verify); + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrStateInfoLoad: " + "write of state-info to NPE failed\n"); + status = IX_NPEDL_CRITICAL_NPE_ERR; + ixNpeDlNpeMgrStats.criticalNpeErrors++; + break; /* abort download */ + } + }/* loop: for each context reg entry in State Info block */ + + ixNpeDlNpeMgrDebugInstructionPostExec (npeBaseAddress); + + if (status == IX_SUCCESS) + { + ixNpeDlNpeMgrStats.stateInfoBlocksLoaded++; + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrStateInfoLoad : status = %d\n", + status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrNpeReset + */ +IX_STATUS +ixNpeDlNpeMgrNpeReset ( + IxNpeDlNpeId npeId) +{ + UINT32 npeBaseAddress; + IxNpeDlCtxtRegNum ctxtReg; /* identifies Context Store reg (0-3) */ + UINT32 ctxtNum; /* identifies Context number (0-16) */ + UINT32 regAddr; + UINT32 regVal; + UINT32 localIndex; + UINT32 indexMax; + IX_STATUS status = IX_SUCCESS; + IxFeatureCtrlReg unitFuseReg; + UINT32 ixNpeConfigCtrlRegVal; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrNpeReset\n"); + + /* get base memory address of NPE from npeId */ + npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); + + /* pre-store the NPE Config Control Register Value */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, &ixNpeConfigCtrlRegVal); + + ixNpeConfigCtrlRegVal |= 0x3F000000; + + /* disable the parity interrupt */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, (ixNpeConfigCtrlRegVal & IX_NPEDL_PARITY_BIT_MASK)); + + ixNpeDlNpeMgrDebugInstructionPreExec (npeBaseAddress); + + /* + * clear the FIFOs + */ + while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, + IX_NPEDL_REG_OFFSET_WFIFO, + IX_NPEDL_MASK_WFIFO_VALID)) + { + /* read from the Watch-point FIFO until empty */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WFIFO, + ®Val); + } + + while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, + IX_NPEDL_REG_OFFSET_STAT, + IX_NPEDL_MASK_STAT_OFNE)) + { + /* read from the outFIFO until empty */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_FIFO, + ®Val); + } + + while (ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, + IX_NPEDL_REG_OFFSET_STAT, + IX_NPEDL_MASK_STAT_IFNE)) + { + /* + * step execution of the NPE intruction to read inFIFO using + * the Debug Executing Context stack + */ + status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, + IX_NPEDL_INSTR_RD_FIFO, 0, 0); + + if (IX_SUCCESS != status) + { + return status; + } + + } + + /* + * Reset the mailbox reg + */ + /* ...from XScale side */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_MBST, + IX_NPEDL_REG_RESET_MBST); + /* ...from NPE side */ + status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, + IX_NPEDL_INSTR_RESET_MBOX, 0, 0); + + if (IX_SUCCESS != status) + { + return status; + } + + /* + * Reset the physical registers in the NPE register file: + * Note: no need to save/restore REGMAP for Context 0 here + * since all Context Store regs are reset in subsequent code + */ + for (regAddr = 0; + (regAddr < IX_NPEDL_TOTAL_NUM_PHYS_REG) && (status != IX_FAIL); + regAddr++) + { + /* for each physical register in the NPE reg file, write 0 : */ + status = ixNpeDlNpeMgrPhysicalRegWrite (npeBaseAddress, regAddr, + 0, TRUE); + if (status != IX_SUCCESS) + { + return status; /* abort reset */ + } + } + + + /* + * Reset the context store: + */ + for (ctxtNum = IX_NPEDL_CTXT_NUM_MIN; + ctxtNum <= IX_NPEDL_CTXT_NUM_MAX; ctxtNum++) + { + /* set each context's Context Store registers to reset values: */ + for (ctxtReg = 0; ctxtReg < IX_NPEDL_CTXT_REG_MAX; ctxtReg++) + { + /* NOTE that there is no STEVT register for Context 0 */ + if (!((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STEVT))) + { + regVal = ixNpeDlCtxtRegResetValues[ctxtReg]; + status = ixNpeDlNpeMgrCtxtRegWrite (npeBaseAddress, ctxtNum, + ctxtReg, regVal, TRUE); + if (status != IX_SUCCESS) + { + return status; /* abort reset */ + } + } + } + } + + ixNpeDlNpeMgrDebugInstructionPostExec (npeBaseAddress); + + /* write Reset values to Execution Context Stack registers */ + indexMax = sizeof (ixNpeDlEcsRegResetValues) / + sizeof (IxNpeDlEcsRegResetValue); + for (localIndex = 0; localIndex < indexMax; localIndex++) + { + regAddr = ixNpeDlEcsRegResetValues[localIndex].regAddr; + regVal = ixNpeDlEcsRegResetValues[localIndex].regResetVal; + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, regAddr, regVal); + } + + /* clear the profile counter */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT); + + /* clear registers EXCT, AP0, AP1, AP2 and AP3 */ + for (regAddr = IX_NPEDL_REG_OFFSET_EXCT; + regAddr <= IX_NPEDL_REG_OFFSET_AP3; + regAddr += IX_NPEDL_BYTES_PER_WORD) + { + IX_NPEDL_REG_WRITE (npeBaseAddress, regAddr, 0); + } + + /* Reset the Watch-count register */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, 0); + + /* + * WR IXA00055043 - Remove IMEM Parity Introduced by NPE Reset Operation + */ + + /* + * Call the feature control API to fused out and reset the NPE and its + * coprocessor - to reset internal states and remove parity error + */ + unitFuseReg = ixFeatureCtrlRead (); + unitFuseReg |= (IX_NPEDL_RESET_NPE_PARITY << npeId); + ixFeatureCtrlWrite (unitFuseReg); + + /* call the feature control API to un-fused and un-reset the NPE & COP */ + unitFuseReg &= (~(IX_NPEDL_RESET_NPE_PARITY << npeId)); + ixFeatureCtrlWrite (unitFuseReg); + + /* + * Call NpeMgr function to stop the NPE again after the Feature Control + * has unfused and Un-Reset the NPE and its associated Coprocessors + */ + status = ixNpeDlNpeMgrNpeStop (npeId); + + /* restore NPE configuration bus Control Register - Parity Settings */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_CTL, + (ixNpeConfigCtrlRegVal & IX_NPEDL_CONFIG_CTRL_REG_MASK)); + + ixNpeDlNpeMgrStats.npeResets++; + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrNpeReset : status = %d\n", status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrNpeStart + */ +IX_STATUS +ixNpeDlNpeMgrNpeStart ( + IxNpeDlNpeId npeId) +{ + UINT32 npeBaseAddress; + UINT32 ecsRegVal; + BOOL npeRunning; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrNpeStart\n"); + + /* get base memory address of NPE from npeId */ + npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); + + /* + * ensure only Background Context Stack Level is Active by turning off + * the Active bit in each of the other Executing Context Stack levels + */ + ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, + IX_NPEDL_ECS_PRI_1_CTXT_REG_0); + ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_PRI_1_CTXT_REG_0, + ecsRegVal); + + ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, + IX_NPEDL_ECS_PRI_2_CTXT_REG_0); + ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_PRI_2_CTXT_REG_0, + ecsRegVal); + + ecsRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, + IX_NPEDL_ECS_DBG_CTXT_REG_0); + ecsRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE; + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, + ecsRegVal); + + /* clear the pipeline */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); + + /* start NPE execution by issuing command through EXCTL register on NPE */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_START); + + /* + * check execution status of NPE to verify NPE Start operation was + * successful + */ + npeRunning = ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, + IX_NPEDL_REG_OFFSET_EXCTL, + IX_NPEDL_EXCTL_STATUS_RUN); + if (npeRunning) + { + ixNpeDlNpeMgrStats.npeStarts++; + } + else + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrNpeStart: " + "failed to start NPE execution\n"); + status = IX_FAIL; + } + + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrNpeStart : status = %d\n", status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrNpeStop + */ +IX_STATUS +ixNpeDlNpeMgrNpeStop ( + IxNpeDlNpeId npeId) +{ + UINT32 npeBaseAddress; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrNpeStop\n"); + + /* get base memory address of NPE from npeId */ + npeBaseAddress = ixNpeDlNpeMgrBaseAddressGet (npeId); + + /* stop NPE execution by issuing command through EXCTL register on NPE */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STOP); + + /* verify that NPE Stop was successful */ + if (! ixNpeDlNpeMgrBitsSetCheck (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, + IX_NPEDL_EXCTL_STATUS_STOP)) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrNpeStop: " + "failed to stop NPE execution\n"); + status = IX_FAIL; + } + + ixNpeDlNpeMgrStats.npeStops++; + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrNpeStop : status = %d\n", status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrBitsSetCheck + */ +PRIVATE BOOL +ixNpeDlNpeMgrBitsSetCheck ( + UINT32 npeBaseAddress, + UINT32 regOffset, + UINT32 expectedBitsSet) +{ + UINT32 regVal; + IX_NPEDL_REG_READ (npeBaseAddress, regOffset, ®Val); + + return expectedBitsSet == (expectedBitsSet & regVal); +} + + +/* + * Function definition: ixNpeDlNpeMgrStatsShow + */ +void +ixNpeDlNpeMgrStatsShow (void) +{ + ixOsalLog (IX_OSAL_LOG_LVL_USER, + IX_OSAL_LOG_DEV_STDOUT, + "\nixNpeDlNpeMgrStatsShow:\n" + "\tInstruction Blocks loaded: %u\n" + "\tData Blocks loaded: %u\n" + "\tState Information Blocks loaded: %u\n" + "\tCritical NPE errors: %u\n" + "\tCritical Microcode errors: %u\n", + ixNpeDlNpeMgrStats.instructionBlocksLoaded, + ixNpeDlNpeMgrStats.dataBlocksLoaded, + ixNpeDlNpeMgrStats.stateInfoBlocksLoaded, + ixNpeDlNpeMgrStats.criticalNpeErrors, + ixNpeDlNpeMgrStats.criticalMicrocodeErrors, + 0); + + ixOsalLog (IX_OSAL_LOG_LVL_USER, + IX_OSAL_LOG_DEV_STDOUT, + "\tSuccessful NPE Starts: %u\n" + "\tSuccessful NPE Stops: %u\n" + "\tSuccessful NPE Resets: %u\n\n", + ixNpeDlNpeMgrStats.npeStarts, + ixNpeDlNpeMgrStats.npeStops, + ixNpeDlNpeMgrStats.npeResets, + 0,0,0); + + ixNpeDlNpeMgrUtilsStatsShow (); +} + + +/* + * Function definition: ixNpeDlNpeMgrStatsReset + */ +void +ixNpeDlNpeMgrStatsReset (void) +{ + ixNpeDlNpeMgrStats.instructionBlocksLoaded = 0; + ixNpeDlNpeMgrStats.dataBlocksLoaded = 0; + ixNpeDlNpeMgrStats.stateInfoBlocksLoaded = 0; + ixNpeDlNpeMgrStats.criticalNpeErrors = 0; + ixNpeDlNpeMgrStats.criticalMicrocodeErrors = 0; + ixNpeDlNpeMgrStats.npeStarts = 0; + ixNpeDlNpeMgrStats.npeStops = 0; + ixNpeDlNpeMgrStats.npeResets = 0; + + ixNpeDlNpeMgrUtilsStatsReset (); +} diff --git a/drivers/net/npe/IxNpeDlNpeMgrUtils.c b/drivers/net/npe/IxNpeDlNpeMgrUtils.c new file mode 100644 index 0000000000..18cac50208 --- /dev/null +++ b/drivers/net/npe/IxNpeDlNpeMgrUtils.c @@ -0,0 +1,806 @@ +/** + * @file IxNpeDlNpeMgrUtils.c + * + * @author Intel Corporation + * @date 18 February 2002 + * + * @brief This file contains the implementation of the private API for the + * IXP425 NPE Downloader NpeMgr Utils module + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +/* + * Put the system defined include files required. + */ +#define IX_NPE_DL_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of + * retries before + * timeout + */ + +/* + * Put the user defined include files required. + */ +#include "IxOsal.h" +#include "IxNpeDl.h" +#include "IxNpeDlNpeMgrUtils_p.h" +#include "IxNpeDlNpeMgrEcRegisters_p.h" +#include "IxNpeDlMacros_p.h" + +/* + * #defines and macros used in this file. + */ + +/* used to bit-mask a number of bytes */ +#define IX_NPEDL_MASK_LOWER_BYTE_OF_WORD 0x000000FF +#define IX_NPEDL_MASK_LOWER_SHORT_OF_WORD 0x0000FFFF +#define IX_NPEDL_MASK_FULL_WORD 0xFFFFFFFF + +#define IX_NPEDL_BYTES_PER_WORD 4 +#define IX_NPEDL_BYTES_PER_SHORT 2 + +#define IX_NPEDL_REG_SIZE_BYTE 8 +#define IX_NPEDL_REG_SIZE_SHORT 16 +#define IX_NPEDL_REG_SIZE_WORD 32 + +/* + * Introduce extra read cycles after issuing read command to NPE + * so that we read the register after the NPE has updated it + * This is to overcome race condition between XScale and NPE + */ +#define IX_NPEDL_DELAY_READ_CYCLES 2 +/* + * To mask top three MSBs of 32bit word to download into NPE IMEM + */ +#define IX_NPEDL_MASK_UNUSED_IMEM_BITS 0x1FFFFFFF; + + +/* + * typedefs + */ +typedef struct +{ + UINT32 regAddress; + UINT32 regSize; +} IxNpeDlCtxtRegAccessInfo; + +/* module statistics counters */ +typedef struct +{ + UINT32 insMemWrites; + UINT32 insMemWriteFails; + UINT32 dataMemWrites; + UINT32 dataMemWriteFails; + UINT32 ecsRegWrites; + UINT32 ecsRegReads; + UINT32 dbgInstructionExecs; + UINT32 contextRegWrites; + UINT32 physicalRegWrites; + UINT32 nextPcWrites; +} IxNpeDlNpeMgrUtilsStats; + + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +/* + * contains useful address and function pointers to read/write Context Regs, + * eliminating some switch or if-else statements in places + */ +static IxNpeDlCtxtRegAccessInfo ixNpeDlCtxtRegAccInfo[IX_NPEDL_CTXT_REG_MAX] = +{ + { + IX_NPEDL_CTXT_REG_ADDR_STEVT, + IX_NPEDL_REG_SIZE_BYTE + }, + { + IX_NPEDL_CTXT_REG_ADDR_STARTPC, + IX_NPEDL_REG_SIZE_SHORT + }, + { + IX_NPEDL_CTXT_REG_ADDR_REGMAP, + IX_NPEDL_REG_SIZE_SHORT + }, + { + IX_NPEDL_CTXT_REG_ADDR_CINDEX, + IX_NPEDL_REG_SIZE_BYTE + } +}; + +static UINT32 ixNpeDlSavedExecCount = 0; +static UINT32 ixNpeDlSavedEcsDbgCtxtReg2 = 0; + +static IxNpeDlNpeMgrUtilsStats ixNpeDlNpeMgrUtilsStats; + + +/* + * static function prototypes. + */ +PRIVATE __inline__ void +ixNpeDlNpeMgrWriteCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, + UINT32 addr, UINT32 data); + +PRIVATE __inline__ UINT32 +ixNpeDlNpeMgrReadCommandIssue (UINT32 npeBaseAddress, UINT32 cmd, UINT32 addr); + +PRIVATE IX_STATUS +ixNpeDlNpeMgrLogicalRegRead (UINT32 npeBaseAddress, UINT32 regAddr, + UINT32 regSize, UINT32 ctxtNum, UINT32 *regVal); + +PRIVATE IX_STATUS +ixNpeDlNpeMgrLogicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr, + UINT32 regVal, UINT32 regSize, + UINT32 ctxtNum, BOOL verify); + +/* + * Function definition: ixNpeDlNpeMgrWriteCommandIssue + */ +PRIVATE __inline__ void +ixNpeDlNpeMgrWriteCommandIssue ( + UINT32 npeBaseAddress, + UINT32 cmd, + UINT32 addr, + UINT32 data) +{ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, data); + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr); + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd); +} + + +/* + * Function definition: ixNpeDlNpeMgrReadCommandIssue + */ +PRIVATE __inline__ UINT32 +ixNpeDlNpeMgrReadCommandIssue ( + UINT32 npeBaseAddress, + UINT32 cmd, + UINT32 addr) +{ + UINT32 data = 0; + int i; + + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXAD, addr); + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, cmd); + for (i = 0; i <= IX_NPEDL_DELAY_READ_CYCLES; i++) + { + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, &data); + } + + return data; +} + +/* + * Function definition: ixNpeDlNpeMgrInsMemWrite + */ +IX_STATUS +ixNpeDlNpeMgrInsMemWrite ( + UINT32 npeBaseAddress, + UINT32 insMemAddress, + UINT32 insMemData, + BOOL verify) +{ + UINT32 insMemDataRtn; + + ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_WR_INS_MEM, + insMemAddress, insMemData); + if (verify) + { + /* write invalid data to this reg, so we can see if we're reading + the EXDATA register too early */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, + ~insMemData); + + /*Disabled since top 3 MSB are not used for Azusa hardware Refer WR:IXA00053900*/ + insMemData&=IX_NPEDL_MASK_UNUSED_IMEM_BITS; + + insMemDataRtn=ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_RD_INS_MEM, + insMemAddress); + + insMemDataRtn&=IX_NPEDL_MASK_UNUSED_IMEM_BITS; + + if (insMemData != insMemDataRtn) + { + ixNpeDlNpeMgrUtilsStats.insMemWriteFails++; + return IX_FAIL; + } + } + + ixNpeDlNpeMgrUtilsStats.insMemWrites++; + return IX_SUCCESS; +} + + +/* + * Function definition: ixNpeDlNpeMgrDataMemWrite + */ +IX_STATUS +ixNpeDlNpeMgrDataMemWrite ( + UINT32 npeBaseAddress, + UINT32 dataMemAddress, + UINT32 dataMemData, + BOOL verify) +{ + ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_WR_DATA_MEM, + dataMemAddress, dataMemData); + if (verify) + { + /* write invalid data to this reg, so we can see if we're reading + the EXDATA register too early */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, ~dataMemData); + + if (dataMemData != + ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_RD_DATA_MEM, + dataMemAddress)) + { + ixNpeDlNpeMgrUtilsStats.dataMemWriteFails++; + return IX_FAIL; + } + } + + ixNpeDlNpeMgrUtilsStats.dataMemWrites++; + return IX_SUCCESS; +} + + +/* + * Function definition: ixNpeDlNpeMgrExecAccRegWrite + */ +void +ixNpeDlNpeMgrExecAccRegWrite ( + UINT32 npeBaseAddress, + UINT32 regAddress, + UINT32 regData) +{ + ixNpeDlNpeMgrWriteCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_WR_ECS_REG, + regAddress, regData); + ixNpeDlNpeMgrUtilsStats.ecsRegWrites++; +} + + +/* + * Function definition: ixNpeDlNpeMgrExecAccRegRead + */ +UINT32 +ixNpeDlNpeMgrExecAccRegRead ( + UINT32 npeBaseAddress, + UINT32 regAddress) +{ + ixNpeDlNpeMgrUtilsStats.ecsRegReads++; + return ixNpeDlNpeMgrReadCommandIssue (npeBaseAddress, + IX_NPEDL_EXCTL_CMD_RD_ECS_REG, + regAddress); +} + + +/* + * Function definition: ixNpeDlNpeMgrCommandIssue + */ +void +ixNpeDlNpeMgrCommandIssue ( + UINT32 npeBaseAddress, + UINT32 command) +{ + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrCommandIssue\n"); + + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCTL, command); + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrCommandIssue\n"); +} + + +/* + * Function definition: ixNpeDlNpeMgrDebugInstructionPreExec + */ +void +ixNpeDlNpeMgrDebugInstructionPreExec( + UINT32 npeBaseAddress) +{ + /* turn off the halt bit by clearing Execution Count register. */ + /* save reg contents 1st and restore later */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, + &ixNpeDlSavedExecCount); + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, 0); + + /* ensure that IF and IE are on (temporarily), so that we don't end up + * stepping forever */ + ixNpeDlSavedEcsDbgCtxtReg2 = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, + IX_NPEDL_ECS_DBG_CTXT_REG_2); + + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2, + (ixNpeDlSavedEcsDbgCtxtReg2 | + IX_NPEDL_MASK_ECS_DBG_REG_2_IF | + IX_NPEDL_MASK_ECS_DBG_REG_2_IE)); +} + + +/* + * Function definition: ixNpeDlNpeMgrDebugInstructionExec + */ +IX_STATUS +ixNpeDlNpeMgrDebugInstructionExec( + UINT32 npeBaseAddress, + UINT32 npeInstruction, + UINT32 ctxtNum, + UINT32 ldur) +{ + UINT32 ecsDbgRegVal; + UINT32 oldWatchcount, newWatchcount; + UINT32 retriesCount = 0; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrDebugInstructionExec\n"); + + /* set the Active bit, and the LDUR, in the debug level */ + ecsDbgRegVal = IX_NPEDL_MASK_ECS_REG_0_ACTIVE | + (ldur << IX_NPEDL_OFFSET_ECS_REG_0_LDUR); + + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, + ecsDbgRegVal); + + /* + * set CCTXT at ECS DEBUG L3 to specify in which context to execute the + * instruction, and set SELCTXT at ECS DEBUG Level to specify which context + * store to access. + * Debug ECS Level Reg 1 has form 0x000n000n, where n = context number + */ + ecsDbgRegVal = (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_CCTXT) | + (ctxtNum << IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT); + + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_1, + ecsDbgRegVal); + + /* clear the pipeline */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); + + /* load NPE instruction into the instruction register */ + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_INSTRUCT_REG, + npeInstruction); + + /* we need this value later to wait for completion of NPE execution step */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, &oldWatchcount); + + /* issue a Step One command via the Execution Control register */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_STEP); + + /* Watch Count register increments when NPE completes an instruction */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, + &newWatchcount); + + /* + * force the XScale to wait until the NPE has finished execution step + * NOTE that this delay will be very small, just long enough to allow a + * single NPE instruction to complete execution; if instruction execution + * is not completed before timeout retries, exit the while loop + */ + while ((IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) + && (newWatchcount == oldWatchcount)) + { + /* Watch Count register increments when NPE completes an instruction */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_WC, + &newWatchcount); + + retriesCount++; + } + + if (IX_NPE_DL_MAX_NUM_OF_RETRIES > retriesCount) + { + ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs++; + } + else + { + /* Return timeout status as the instruction has not been executed + * after maximum retries */ + status = IX_NPEDL_CRITICAL_NPE_ERR; + } + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrDebugInstructionExec\n"); + + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrDebugInstructionPostExec + */ +void +ixNpeDlNpeMgrDebugInstructionPostExec( + UINT32 npeBaseAddress) +{ + /* clear active bit in debug level */ + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_0, + 0); + + /* clear the pipeline */ + ixNpeDlNpeMgrCommandIssue (npeBaseAddress, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE); + + /* restore Execution Count register contents. */ + IX_NPEDL_REG_WRITE (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXCT, + ixNpeDlSavedExecCount); + + /* restore IF and IE bits to original values */ + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, IX_NPEDL_ECS_DBG_CTXT_REG_2, + ixNpeDlSavedEcsDbgCtxtReg2); +} + + +/* + * Function definition: ixNpeDlNpeMgrLogicalRegRead + */ +PRIVATE IX_STATUS +ixNpeDlNpeMgrLogicalRegRead ( + UINT32 npeBaseAddress, + UINT32 regAddr, + UINT32 regSize, + UINT32 ctxtNum, + UINT32 *regVal) +{ + IX_STATUS status = IX_SUCCESS; + UINT32 npeInstruction = 0; + UINT32 mask = 0; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrLogicalRegRead\n"); + + switch (regSize) + { + case IX_NPEDL_REG_SIZE_BYTE: + npeInstruction = IX_NPEDL_INSTR_RD_REG_BYTE; + mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD; break; + case IX_NPEDL_REG_SIZE_SHORT: + npeInstruction = IX_NPEDL_INSTR_RD_REG_SHORT; + mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD; break; + case IX_NPEDL_REG_SIZE_WORD: + npeInstruction = IX_NPEDL_INSTR_RD_REG_WORD; + mask = IX_NPEDL_MASK_FULL_WORD; break; + } + + /* make regAddr be the SRC and DEST operands (e.g. movX d0, d0) */ + npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_SRC) | + (regAddr << IX_NPEDL_OFFSET_INSTR_DEST); + + /* step execution of NPE intruction using Debug Executing Context stack */ + status = ixNpeDlNpeMgrDebugInstructionExec (npeBaseAddress, npeInstruction, + ctxtNum, IX_NPEDL_RD_INSTR_LDUR); + + if (IX_SUCCESS != status) + { + return status; + } + + /* read value of register from Execution Data register */ + IX_NPEDL_REG_READ (npeBaseAddress, IX_NPEDL_REG_OFFSET_EXDATA, regVal); + + /* align value from left to right */ + *regVal = (*regVal >> (IX_NPEDL_REG_SIZE_WORD - regSize)) & mask; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrLogicalRegRead\n"); + + return IX_SUCCESS; +} + + +/* + * Function definition: ixNpeDlNpeMgrLogicalRegWrite + */ +PRIVATE IX_STATUS +ixNpeDlNpeMgrLogicalRegWrite ( + UINT32 npeBaseAddress, + UINT32 regAddr, + UINT32 regVal, + UINT32 regSize, + UINT32 ctxtNum, + BOOL verify) +{ + UINT32 npeInstruction = 0; + UINT32 mask = 0; + IX_STATUS status = IX_SUCCESS; + UINT32 retRegVal; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrLogicalRegWrite\n"); + + if (regSize == IX_NPEDL_REG_SIZE_WORD) + { + /* NPE register addressing is left-to-right: e.g. |d0|d1|d2|d3| */ + /* Write upper half-word (short) to |d0|d1| */ + status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, + regVal >> IX_NPEDL_REG_SIZE_SHORT, + IX_NPEDL_REG_SIZE_SHORT, + ctxtNum, verify); + + if (IX_SUCCESS != status) + { + return status; + } + + /* Write lower half-word (short) to |d2|d3| */ + status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, + regAddr + IX_NPEDL_BYTES_PER_SHORT, + regVal & IX_NPEDL_MASK_LOWER_SHORT_OF_WORD, + IX_NPEDL_REG_SIZE_SHORT, + ctxtNum, verify); + + if (IX_SUCCESS != status) + { + return status; + } + } + else + { + switch (regSize) + { + case IX_NPEDL_REG_SIZE_BYTE: + npeInstruction = IX_NPEDL_INSTR_WR_REG_BYTE; + mask = IX_NPEDL_MASK_LOWER_BYTE_OF_WORD; break; + case IX_NPEDL_REG_SIZE_SHORT: + npeInstruction = IX_NPEDL_INSTR_WR_REG_SHORT; + mask = IX_NPEDL_MASK_LOWER_SHORT_OF_WORD; break; + } + /* mask out any redundant bits, so verify will work later */ + regVal &= mask; + + /* fill dest operand field of instruction with destination reg addr */ + npeInstruction |= (regAddr << IX_NPEDL_OFFSET_INSTR_DEST); + + /* fill src operand field of instruction with least-sig 5 bits of val*/ + npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA) << + IX_NPEDL_OFFSET_INSTR_SRC); + + /* fill coprocessor field of instruction with most-sig 11 bits of val*/ + npeInstruction |= ((regVal & IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA) << + IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA); + + /* step execution of NPE intruction using Debug ECS */ + status = ixNpeDlNpeMgrDebugInstructionExec(npeBaseAddress, npeInstruction, + ctxtNum, IX_NPEDL_WR_INSTR_LDUR); + + if (IX_SUCCESS != status) + { + return status; + } + }/* condition: if reg to be written is 8-bit or 16-bit (not 32-bit) */ + + if (verify) + { + status = ixNpeDlNpeMgrLogicalRegRead (npeBaseAddress, regAddr, + regSize, ctxtNum, &retRegVal); + + if (IX_SUCCESS == status) + { + if (regVal != retRegVal) + { + status = IX_FAIL; + } + } + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrLogicalRegWrite : status = %d\n", + status); + + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrPhysicalRegWrite + */ +IX_STATUS +ixNpeDlNpeMgrPhysicalRegWrite ( + UINT32 npeBaseAddress, + UINT32 regAddr, + UINT32 regValue, + BOOL verify) +{ + IX_STATUS status; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrPhysicalRegWrite\n"); + +/* + * There are 32 physical registers used in an NPE. These are + * treated as 16 pairs of 32-bit registers. To write one of the pair, + * write the pair number (0-16) to the REGMAP for Context 0. Then write + * the value to register 0 or 4 in the regfile, depending on which + * register of the pair is to be written + */ + + /* + * set REGMAP for context 0 to (regAddr >> 1) to choose which pair (0-16) + * of physical registers to write + */ + status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, + IX_NPEDL_CTXT_REG_ADDR_REGMAP, + (regAddr >> + IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP), + IX_NPEDL_REG_SIZE_SHORT, 0, verify); + if (status == IX_SUCCESS) + { + /* regAddr = 0 or 4 */ + regAddr = (regAddr & IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR) * + IX_NPEDL_BYTES_PER_WORD; + + status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, regAddr, regValue, + IX_NPEDL_REG_SIZE_WORD, 0, verify); + } + + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrPhysicalRegWrite: " + "error writing to physical register\n"); + } + + ixNpeDlNpeMgrUtilsStats.physicalRegWrites++; + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrPhysicalRegWrite : status = %d\n", + status); + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrCtxtRegWrite + */ +IX_STATUS +ixNpeDlNpeMgrCtxtRegWrite ( + UINT32 npeBaseAddress, + UINT32 ctxtNum, + IxNpeDlCtxtRegNum ctxtReg, + UINT32 ctxtRegVal, + BOOL verify) +{ + UINT32 tempRegVal; + UINT32 ctxtRegAddr; + UINT32 ctxtRegSize; + IX_STATUS status = IX_SUCCESS; + + IX_NPEDL_TRACE0 (IX_NPEDL_FN_ENTRY_EXIT, + "Entering ixNpeDlNpeMgrCtxtRegWrite\n"); + + /* + * Context 0 has no STARTPC. Instead, this value is used to set + * NextPC for Background ECS, to set where NPE starts executing code + */ + if ((ctxtNum == 0) && (ctxtReg == IX_NPEDL_CTXT_REG_STARTPC)) + { + /* read BG_CTXT_REG_0, update NEXTPC bits, and write back to reg */ + tempRegVal = ixNpeDlNpeMgrExecAccRegRead (npeBaseAddress, + IX_NPEDL_ECS_BG_CTXT_REG_0); + tempRegVal &= ~IX_NPEDL_MASK_ECS_REG_0_NEXTPC; + tempRegVal |= (ctxtRegVal << IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC) & + IX_NPEDL_MASK_ECS_REG_0_NEXTPC; + + ixNpeDlNpeMgrExecAccRegWrite (npeBaseAddress, + IX_NPEDL_ECS_BG_CTXT_REG_0, tempRegVal); + + ixNpeDlNpeMgrUtilsStats.nextPcWrites++; + } + else + { + ctxtRegAddr = ixNpeDlCtxtRegAccInfo[ctxtReg].regAddress; + ctxtRegSize = ixNpeDlCtxtRegAccInfo[ctxtReg].regSize; + status = ixNpeDlNpeMgrLogicalRegWrite (npeBaseAddress, ctxtRegAddr, + ctxtRegVal, ctxtRegSize, + ctxtNum, verify); + if (status != IX_SUCCESS) + { + IX_NPEDL_ERROR_REPORT ("ixNpeDlNpeMgrCtxtRegWrite: " + "error writing to context store register\n"); + } + + ixNpeDlNpeMgrUtilsStats.contextRegWrites++; + } + + IX_NPEDL_TRACE1 (IX_NPEDL_FN_ENTRY_EXIT, + "Exiting ixNpeDlNpeMgrCtxtRegWrite : status = %d\n", + status); + + return status; +} + + +/* + * Function definition: ixNpeDlNpeMgrUtilsStatsShow + */ +void +ixNpeDlNpeMgrUtilsStatsShow (void) +{ + ixOsalLog (IX_OSAL_LOG_LVL_USER, + IX_OSAL_LOG_DEV_STDOUT, + "\nixNpeDlNpeMgrUtilsStatsShow:\n" + "\tInstruction Memory writes: %u\n" + "\tInstruction Memory writes failed: %u\n" + "\tData Memory writes: %u\n" + "\tData Memory writes failed: %u\n", + ixNpeDlNpeMgrUtilsStats.insMemWrites, + ixNpeDlNpeMgrUtilsStats.insMemWriteFails, + ixNpeDlNpeMgrUtilsStats.dataMemWrites, + ixNpeDlNpeMgrUtilsStats.dataMemWriteFails, + 0,0); + + ixOsalLog (IX_OSAL_LOG_LVL_USER, + IX_OSAL_LOG_DEV_STDOUT, + "\tExecuting Context Stack Register writes: %u\n" + "\tExecuting Context Stack Register reads: %u\n" + "\tPhysical Register writes: %u\n" + "\tContext Store Register writes: %u\n" + "\tExecution Backgound Context NextPC writes: %u\n" + "\tDebug Instructions Executed: %u\n\n", + ixNpeDlNpeMgrUtilsStats.ecsRegWrites, + ixNpeDlNpeMgrUtilsStats.ecsRegReads, + ixNpeDlNpeMgrUtilsStats.physicalRegWrites, + ixNpeDlNpeMgrUtilsStats.contextRegWrites, + ixNpeDlNpeMgrUtilsStats.nextPcWrites, + ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs); +} + + +/* + * Function definition: ixNpeDlNpeMgrUtilsStatsReset + */ +void +ixNpeDlNpeMgrUtilsStatsReset (void) +{ + ixNpeDlNpeMgrUtilsStats.insMemWrites = 0; + ixNpeDlNpeMgrUtilsStats.insMemWriteFails = 0; + ixNpeDlNpeMgrUtilsStats.dataMemWrites = 0; + ixNpeDlNpeMgrUtilsStats.dataMemWriteFails = 0; + ixNpeDlNpeMgrUtilsStats.ecsRegWrites = 0; + ixNpeDlNpeMgrUtilsStats.ecsRegReads = 0; + ixNpeDlNpeMgrUtilsStats.physicalRegWrites = 0; + ixNpeDlNpeMgrUtilsStats.contextRegWrites = 0; + ixNpeDlNpeMgrUtilsStats.nextPcWrites = 0; + ixNpeDlNpeMgrUtilsStats.dbgInstructionExecs = 0; +} diff --git a/drivers/net/npe/IxNpeMh.c b/drivers/net/npe/IxNpeMh.c new file mode 100644 index 0000000000..8703def8bc --- /dev/null +++ b/drivers/net/npe/IxNpeMh.c @@ -0,0 +1,582 @@ +/** + * @file IxNpeMh.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the public API for the + * IXP425 NPE Message Handler component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required. + */ + +/* + * Put the user defined include files required. + */ + +#include "IxOsal.h" +#include "IxNpeMhMacros_p.h" + +#include "IxNpeMh.h" + +#include "IxNpeMhConfig_p.h" +#include "IxNpeMhReceive_p.h" +#include "IxNpeMhSend_p.h" +#include "IxNpeMhSolicitedCbMgr_p.h" +#include "IxNpeMhUnsolicitedCbMgr_p.h" + +/* + * #defines and macros used in this file. + */ + +/* + * Typedefs whose scope is limited to this file. + */ + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +PRIVATE BOOL ixNpeMhInitialized = FALSE; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ + +/* + * Function definition: ixNpeMhInitialize + */ + +PUBLIC IX_STATUS ixNpeMhInitialize ( + IxNpeMhNpeInterrupts npeInterrupts) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhInitialize\n"); + + /* check the npeInterrupts parameter */ + if ((npeInterrupts != IX_NPEMH_NPEINTERRUPTS_NO) && + (npeInterrupts != IX_NPEMH_NPEINTERRUPTS_YES)) + { + IX_NPEMH_ERROR_REPORT ("Illegal npeInterrupts parameter value\n"); + return IX_FAIL; + } + + /* parameters are ok ... */ + + /* initialize the Receive module */ + ixNpeMhReceiveInitialize (); + + /* initialize the Solicited Callback Manager module */ + ixNpeMhSolicitedCbMgrInitialize (); + + /* initialize the Unsolicited Callback Manager module */ + ixNpeMhUnsolicitedCbMgrInitialize (); + + /* initialize the Configuration module + * + * NOTE: This module was originally configured before the + * others, but the sequence was changed so that interrupts + * would only be enabled after the handler functions were + * set up. The above modules need to be initialised to + * handle the NPE interrupts. See SCR #2231. + */ + ixNpeMhConfigInitialize (npeInterrupts); + + ixNpeMhInitialized = TRUE; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhInitialize\n"); + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhUnload + */ + +PUBLIC IX_STATUS ixNpeMhUnload (void) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhUnload\n"); + + if (!ixNpeMhInitialized) + { + return IX_FAIL; + } + + /* Uninitialize the Configuration module */ + ixNpeMhConfigUninit (); + + ixNpeMhInitialized = FALSE; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhUnload\n"); + + return IX_SUCCESS; +} + + +/* + * Function definition: ixNpeMhUnsolicitedCallbackRegister + */ + +PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackRegister ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId messageId, + IxNpeMhCallback unsolicitedCallback) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhUnsolicitedCallbackRegister\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* check the messageId parameter */ + if ((messageId < IX_NPEMH_MIN_MESSAGE_ID) + || (messageId > IX_NPEMH_MAX_MESSAGE_ID)) + { + IX_NPEMH_ERROR_REPORT ("Message ID is out of range\n"); + return IX_FAIL; + } + + /* the unsolicitedCallback parameter is allowed to be NULL */ + + /* parameters are ok ... */ + + /* get the lock to prevent other clients from entering */ + ixNpeMhConfigLockGet (npeId); + + /* save the unsolicited callback for the message ID */ + ixNpeMhUnsolicitedCbMgrCallbackSave ( + npeId, messageId, unsolicitedCallback); + + /* release the lock to allow other clients back in */ + ixNpeMhConfigLockRelease (npeId); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhUnsolicitedCallbackRegister\n"); + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhUnsolicitedCallbackForRangeRegister + */ + +PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId minMessageId, + IxNpeMhMessageId maxMessageId, + IxNpeMhCallback unsolicitedCallback) +{ + IxNpeMhMessageId messageId; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhUnsolicitedCallbackForRangeRegister\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* check the minMessageId parameter */ + if ((minMessageId < IX_NPEMH_MIN_MESSAGE_ID) + || (minMessageId > IX_NPEMH_MAX_MESSAGE_ID)) + { + IX_NPEMH_ERROR_REPORT ("Min message ID is out of range\n"); + return IX_FAIL; + } + + /* check the maxMessageId parameter */ + if ((maxMessageId < IX_NPEMH_MIN_MESSAGE_ID) + || (maxMessageId > IX_NPEMH_MAX_MESSAGE_ID)) + { + IX_NPEMH_ERROR_REPORT ("Max message ID is out of range\n"); + return IX_FAIL; + } + + /* check the semantics of the message range parameters */ + if (minMessageId > maxMessageId) + { + IX_NPEMH_ERROR_REPORT ("Min message ID greater than max message " + "ID\n"); + return IX_FAIL; + } + + /* the unsolicitedCallback parameter is allowed to be NULL */ + + /* parameters are ok ... */ + + /* get the lock to prevent other clients from entering */ + ixNpeMhConfigLockGet (npeId); + + /* for each message ID in the range ... */ + for (messageId = minMessageId; messageId <= maxMessageId; messageId++) + { + /* save the unsolicited callback for the message ID */ + ixNpeMhUnsolicitedCbMgrCallbackSave ( + npeId, messageId, unsolicitedCallback); + } + + /* release the lock to allow other clients back in */ + ixNpeMhConfigLockRelease (npeId); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhUnsolicitedCallbackForRangeRegister\n"); + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhMessageSend + */ + +PUBLIC IX_STATUS ixNpeMhMessageSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + UINT32 maxSendRetries) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhMessageSend\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* parameters are ok ... */ + + /* get the lock to prevent other clients from entering */ + ixNpeMhConfigLockGet (npeId); + + /* send the message */ + status = ixNpeMhSendMessageSend (npeId, message, maxSendRetries); + if (status != IX_SUCCESS) + { + IX_NPEMH_ERROR_REPORT ("Failed to send message\n"); + } + + /* release the lock to allow other clients back in */ + ixNpeMhConfigLockRelease (npeId); + + IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhMessageSend" + " : status = %d\n", status); + + return status; +} + +/* + * Function definition: ixNpeMhMessageWithResponseSend + */ + +PUBLIC IX_STATUS ixNpeMhMessageWithResponseSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback, + UINT32 maxSendRetries) +{ + IX_STATUS status = IX_SUCCESS; + IxNpeMhCallback unsolicitedCallback = NULL; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhMessageWithResponseSend\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* the solicitecCallback parameter is allowed to be NULL. this */ + /* signifies the client is not interested in the response message */ + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* check the solicitedMessageId parameter */ + if ((solicitedMessageId < IX_NPEMH_MIN_MESSAGE_ID) + || (solicitedMessageId > IX_NPEMH_MAX_MESSAGE_ID)) + { + IX_NPEMH_ERROR_REPORT ("Solicited message ID is out of range\n"); + return IX_FAIL; + } + + /* check the solicitedMessageId parameter. if an unsolicited */ + /* callback has been registered for the specified message ID then */ + /* report an error and return failure */ + ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( + npeId, solicitedMessageId, &unsolicitedCallback); + if (unsolicitedCallback != NULL) + { + IX_NPEMH_ERROR_REPORT ("Solicited message ID conflicts with " + "unsolicited message ID\n"); + return IX_FAIL; + } + + /* parameters are ok ... */ + + /* get the lock to prevent other clients from entering */ + ixNpeMhConfigLockGet (npeId); + + /* send the message */ + status = ixNpeMhSendMessageWithResponseSend ( + npeId, message, solicitedMessageId, solicitedCallback, + maxSendRetries); + if (status != IX_SUCCESS) + { + IX_NPEMH_ERROR_REPORT ("Failed to send message\n"); + } + + /* release the lock to allow other clients back in */ + ixNpeMhConfigLockRelease (npeId); + + IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhMessageWithResponseSend" + " : status = %d\n", status); + + return status; +} + +/* + * Function definition: ixNpeMhMessagesReceive + */ + +PUBLIC IX_STATUS ixNpeMhMessagesReceive ( + IxNpeMhNpeId npeId) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhMessagesReceive\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* parameters are ok ... */ + + /* get the lock to prevent other clients from entering */ + ixNpeMhConfigLockGet (npeId); + + /* receive messages from the NPE */ + status = ixNpeMhReceiveMessagesReceive (npeId); + + if (status != IX_SUCCESS) + { + IX_NPEMH_ERROR_REPORT ("Failed to receive message\n"); + } + + /* release the lock to allow other clients back in */ + ixNpeMhConfigLockRelease (npeId); + + IX_NPEMH_TRACE1 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhMessagesReceive" + " : status = %d\n", status); + + return status; +} + +/* + * Function definition: ixNpeMhShow + */ + +PUBLIC IX_STATUS ixNpeMhShow ( + IxNpeMhNpeId npeId) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhShow\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* parameters are ok ... */ + + /* note we don't get the lock here as printing the statistics */ + /* to a console may take some time and we don't want to impact */ + /* system performance. this means that the statistics displayed */ + /* may be in a state of flux and make not represent a consistent */ + /* snapshot. */ + + /* display a header */ + ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, + "Current state of NPE ID %d:\n\n", npeId, 0, 0, 0, 0, 0); + + /* show the current state of each module */ + + /* show the current state of the Configuration module */ + ixNpeMhConfigShow (npeId); + + /* show the current state of the Receive module */ + ixNpeMhReceiveShow (npeId); + + /* show the current state of the Send module */ + ixNpeMhSendShow (npeId); + + /* show the current state of the Solicited Callback Manager module */ + ixNpeMhSolicitedCbMgrShow (npeId); + + /* show the current state of the Unsolicited Callback Manager module */ + ixNpeMhUnsolicitedCbMgrShow (npeId); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhShow\n"); + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhShowReset + */ + +PUBLIC IX_STATUS ixNpeMhShowReset ( + IxNpeMhNpeId npeId) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhShowReset\n"); + + /* check that we are initialized */ + if (!ixNpeMhInitialized) + { + IX_NPEMH_ERROR_REPORT ("IxNpeMh component is not initialized\n"); + return IX_FAIL; + } + + /* check the npeId parameter */ + if (!ixNpeMhConfigNpeIdIsValid (npeId)) + { + IX_NPEMH_ERROR_REPORT ("NPE ID invalid\n"); + return IX_FAIL; + } + + /* parameters are ok ... */ + + /* note we don't get the lock here as resetting the statistics */ + /* shouldn't impact system performance. */ + + /* reset the current state of each module */ + + /* reset the current state of the Configuration module */ + ixNpeMhConfigShowReset (npeId); + + /* reset the current state of the Receive module */ + ixNpeMhReceiveShowReset (npeId); + + /* reset the current state of the Send module */ + ixNpeMhSendShowReset (npeId); + + /* reset the current state of the Solicited Callback Manager module */ + ixNpeMhSolicitedCbMgrShowReset (npeId); + + /* reset the current state of the Unsolicited Callback Manager module */ + ixNpeMhUnsolicitedCbMgrShowReset (npeId); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhShowReset\n"); + + return IX_SUCCESS; +} diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c new file mode 100644 index 0000000000..50c8f21138 --- /dev/null +++ b/drivers/net/npe/IxNpeMhConfig.c @@ -0,0 +1,608 @@ +/** + * @file IxNpeMhConfig.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the private API for the + * Configuration module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required. + */ + + +/* + * Put the user defined include files required. + */ + +#include "IxOsal.h" + +#include "IxNpeMhMacros_p.h" + +#include "IxNpeMhConfig_p.h" + +/* + * #defines and macros used in this file. + */ +#define IX_NPE_MH_MAX_NUM_OF_RETRIES 1000000 /**< Maximum number of + * retries before + * timeout + */ + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @struct IxNpeMhConfigStats + * + * @brief This structure is used to maintain statistics for the + * Configuration module. + */ + +typedef struct +{ + UINT32 outFifoReads; /**< outFifo reads */ + UINT32 inFifoWrites; /**< inFifo writes */ + UINT32 maxInFifoFullRetries; /**< max retries if inFIFO full */ + UINT32 maxOutFifoEmptyRetries; /**< max retries if outFIFO empty */ +} IxNpeMhConfigStats; + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES] = +{ + { + 0, + IX_NPEMH_NPEA_INT, + 0, + 0, + 0, + 0, + 0, + NULL, + FALSE + }, + { + 0, + IX_NPEMH_NPEB_INT, + 0, + 0, + 0, + 0, + 0, + NULL, + FALSE + }, + { + 0, + IX_NPEMH_NPEC_INT, + 0, + 0, + 0, + 0, + 0, + NULL, + FALSE + } +}; + +PRIVATE IxNpeMhConfigStats ixNpeMhConfigStats[IX_NPEMH_NUM_NPES]; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ +PRIVATE +void ixNpeMhConfigIsr (void *parameter); + +/* + * Function definition: ixNpeMhConfigIsr + */ + +PRIVATE +void ixNpeMhConfigIsr (void *parameter) +{ + IxNpeMhNpeId npeId = (IxNpeMhNpeId)parameter; + UINT32 ofint; + volatile UINT32 *statusReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigIsr\n"); + + /* get the OFINT (OutFifo interrupt) bit of the status register */ + IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofint, IX_NPEMH_NPE_STAT_OFINT); + + /* if the OFINT status bit is set */ + if (ofint) + { + /* if there is an ISR registered for this NPE */ + if (ixNpeMhConfigNpeInfo[npeId].isr != NULL) + { + /* invoke the ISR routine */ + ixNpeMhConfigNpeInfo[npeId].isr (npeId); + } + else + { + /* if we don't service the interrupt the NPE will continue */ + /* to trigger the interrupt indefinitely */ + IX_NPEMH_ERROR_REPORT ("No ISR registered to service " + "interrupt\n"); + } + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigIsr\n"); +} + +/* + * Function definition: ixNpeMhConfigInitialize + */ + +void ixNpeMhConfigInitialize ( + IxNpeMhNpeInterrupts npeInterrupts) +{ + IxNpeMhNpeId npeId; + UINT32 virtualAddr[IX_NPEMH_NUM_NPES]; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigInitialize\n"); + + /* Request a mapping for the NPE-A config register address space */ + virtualAddr[IX_NPEMH_NPEID_NPEA] = + (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEA_BASE, + IX_OSAL_IXP400_NPEA_MAP_SIZE); + IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEA]); + + /* Request a mapping for the NPE-B config register address space */ + virtualAddr[IX_NPEMH_NPEID_NPEB] = + (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEB_BASE, + IX_OSAL_IXP400_NPEB_MAP_SIZE); + IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEB]); + + /* Request a mapping for the NPE-C config register address space */ + virtualAddr[IX_NPEMH_NPEID_NPEC] = + (UINT32) IX_OSAL_MEM_MAP (IX_NPEMH_NPEC_BASE, + IX_OSAL_IXP400_NPEC_MAP_SIZE); + IX_OSAL_ASSERT (virtualAddr[IX_NPEMH_NPEID_NPEC]); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* declare a convenience pointer */ + IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId]; + + /* store the virtual addresses of the NPE registers for later use */ + npeInfo->virtualRegisterBase = virtualAddr[npeId]; + npeInfo->statusRegister = virtualAddr[npeId] + IX_NPEMH_NPESTAT_OFFSET; + npeInfo->controlRegister = virtualAddr[npeId] + IX_NPEMH_NPECTL_OFFSET; + npeInfo->inFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET; + npeInfo->outFifoRegister = virtualAddr[npeId] + IX_NPEMH_NPEFIFO_OFFSET; + + /* for test purposes - to verify the register addresses */ + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d status register = " + "0x%08X\n", npeId, npeInfo->statusRegister); + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d control register = " + "0x%08X\n", npeId, npeInfo->controlRegister); + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d inFifo register = " + "0x%08X\n", npeId, npeInfo->inFifoRegister); + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NPE %d outFifo register = " + "0x%08X\n", npeId, npeInfo->outFifoRegister); + + /* connect our ISR to the NPE interrupt */ + (void) ixOsalIrqBind ( + npeInfo->interruptId, ixNpeMhConfigIsr, (void *)npeId); + + /* initialise a mutex for this NPE */ + (void) ixOsalMutexInit (&npeInfo->mutex); + + /* if we should service the NPE's "outFIFO not empty" interrupt */ + if (npeInterrupts == IX_NPEMH_NPEINTERRUPTS_YES) + { + /* enable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInterruptEnable (npeId); + } + else + { + /* disable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInterruptDisable (npeId); + } + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigInitialize\n"); +} + +/* + * Function definition: ixNpeMhConfigUninit + */ + +void ixNpeMhConfigUninit (void) +{ + IxNpeMhNpeId npeId; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigUninit\n"); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* declare a convenience pointer */ + IxNpeMhConfigNpeInfo *npeInfo = &ixNpeMhConfigNpeInfo[npeId]; + + /* disconnect ISR */ + ixOsalIrqUnbind(npeInfo->interruptId); + + /* destroy mutex associated with this NPE */ + ixOsalMutexDestroy(&npeInfo->mutex); + + IX_OSAL_MEM_UNMAP (npeInfo->virtualRegisterBase); + + npeInfo->virtualRegisterBase = 0; + npeInfo->statusRegister = 0; + npeInfo->controlRegister = 0; + npeInfo->inFifoRegister = 0; + npeInfo->outFifoRegister = 0; + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigUninit\n"); +} + +/* + * Function definition: ixNpeMhConfigIsrRegister + */ + +void ixNpeMhConfigIsrRegister ( + IxNpeMhNpeId npeId, + IxNpeMhConfigIsr isr) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigIsrRegister\n"); + + /* check if there is already an ISR registered for this NPE */ + if (ixNpeMhConfigNpeInfo[npeId].isr != NULL) + { + IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, "Over-writing registered NPE ISR\n"); + } + + /* save the ISR routine with the NPE info */ + ixNpeMhConfigNpeInfo[npeId].isr = isr; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigIsrRegister\n"); +} + +/* + * Function definition: ixNpeMhConfigNpeInterruptEnable + */ + +BOOL ixNpeMhConfigNpeInterruptEnable ( + IxNpeMhNpeId npeId) +{ + UINT32 ofe; + volatile UINT32 *controlReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister; + + /* get the OFE (OutFifoEnable) bit of the control register */ + IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE); + + /* if the interrupt is disabled then we must enable it */ + if (!ofe) + { + /* set the OFE (OutFifoEnable) bit of the control register */ + /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */ + /* time for the write to have effect */ + IX_NPEMH_REGISTER_WRITE_BITS (controlReg, + (IX_NPEMH_NPE_CTL_OFE | + IX_NPEMH_NPE_CTL_OFEWE), + (IX_NPEMH_NPE_CTL_OFE | + IX_NPEMH_NPE_CTL_OFEWE)); + } + + /* return the previous state of the interrupt */ + return (ofe != 0); +} + +/* + * Function definition: ixNpeMhConfigNpeInterruptDisable + */ + +BOOL ixNpeMhConfigNpeInterruptDisable ( + IxNpeMhNpeId npeId) +{ + UINT32 ofe; + volatile UINT32 *controlReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].controlRegister; + + /* get the OFE (OutFifoEnable) bit of the control register */ + IX_NPEMH_REGISTER_READ_BITS (controlReg, &ofe, IX_NPEMH_NPE_CTL_OFE); + + /* if the interrupt is enabled then we must disable it */ + if (ofe) + { + /* unset the OFE (OutFifoEnable) bit of the control register */ + /* we must set the OFEWE (OutFifoEnableWriteEnable) at the same */ + /* time for the write to have effect */ + IX_NPEMH_REGISTER_WRITE_BITS (controlReg, + (0 | + IX_NPEMH_NPE_CTL_OFEWE), + (IX_NPEMH_NPE_CTL_OFE | + IX_NPEMH_NPE_CTL_OFEWE)); + } + + /* return the previous state of the interrupt */ + return (ofe != 0); +} + +/* + * Function definition: ixNpeMhConfigMessageIdGet + */ + +IxNpeMhMessageId ixNpeMhConfigMessageIdGet ( + IxNpeMhMessage message) +{ + /* return the most-significant byte of the first word of the */ + /* message */ + return ((IxNpeMhMessageId) ((message.data[0] >> 24) & 0xFF)); +} + +/* + * Function definition: ixNpeMhConfigNpeIdIsValid + */ + +BOOL ixNpeMhConfigNpeIdIsValid ( + IxNpeMhNpeId npeId) +{ + /* check that the npeId parameter is within the range of valid IDs */ + return (npeId >= 0 && npeId < IX_NPEMH_NUM_NPES); +} + +/* + * Function definition: ixNpeMhConfigLockGet + */ + +void ixNpeMhConfigLockGet ( + IxNpeMhNpeId npeId) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigLockGet\n"); + + /* lock the mutex for this NPE */ + (void) ixOsalMutexLock (&ixNpeMhConfigNpeInfo[npeId].mutex, + IX_OSAL_WAIT_FOREVER); + + /* disable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInfo[npeId].oldInterruptState = + ixNpeMhConfigNpeInterruptDisable (npeId); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigLockGet\n"); +} + +/* + * Function definition: ixNpeMhConfigLockRelease + */ + +void ixNpeMhConfigLockRelease ( + IxNpeMhNpeId npeId) +{ + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhConfigLockRelease\n"); + + /* if the interrupt was previously enabled */ + if (ixNpeMhConfigNpeInfo[npeId].oldInterruptState) + { + /* enable the NPE's "outFIFO not empty" interrupt */ + ixNpeMhConfigNpeInfo[npeId].oldInterruptState = + ixNpeMhConfigNpeInterruptEnable (npeId); + } + + /* unlock the mutex for this NPE */ + (void) ixOsalMutexUnlock (&ixNpeMhConfigNpeInfo[npeId].mutex); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhConfigLockRelease\n"); +} + +/* + * Function definition: ixNpeMhConfigInFifoWrite + */ + +IX_STATUS ixNpeMhConfigInFifoWrite ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message) +{ + volatile UINT32 *npeInFifo = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].inFifoRegister; + UINT32 retriesCount = 0; + + /* write the first word of the message to the NPE's inFIFO */ + IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[0]); + + /* need to wait for room to write second word - see SCR #493, + poll for maximum number of retries, if exceed maximum + retries, exit from while loop */ + while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount) + && ixNpeMhConfigInFifoIsFull (npeId)) + { + retriesCount++; + } + + /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */ + if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount) + { + return IX_NPEMH_CRITICAL_NPE_ERR; + } + + /* write the second word of the message to the NPE's inFIFO */ + IX_NPEMH_REGISTER_WRITE (npeInFifo, message.data[1]); + + /* record in the stats the maximum number of retries needed */ + if (ixNpeMhConfigStats[npeId].maxInFifoFullRetries < retriesCount) + { + ixNpeMhConfigStats[npeId].maxInFifoFullRetries = retriesCount; + } + + /* update statistical info */ + ixNpeMhConfigStats[npeId].inFifoWrites++; + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhConfigOutFifoRead + */ + +IX_STATUS ixNpeMhConfigOutFifoRead ( + IxNpeMhNpeId npeId, + IxNpeMhMessage *message) +{ + volatile UINT32 *npeOutFifo = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].outFifoRegister; + UINT32 retriesCount = 0; + + /* read the first word of the message from the NPE's outFIFO */ + IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[0]); + + /* need to wait for NPE to write second word - see SCR #493 + poll for maximum number of retries, if exceed maximum + retries, exit from while loop */ + while ((IX_NPE_MH_MAX_NUM_OF_RETRIES > retriesCount) + && ixNpeMhConfigOutFifoIsEmpty (npeId)) + { + retriesCount++; + } + + /* Return TIMEOUT status to caller, indicate that NPE Hang / Halt */ + if (IX_NPE_MH_MAX_NUM_OF_RETRIES == retriesCount) + { + return IX_NPEMH_CRITICAL_NPE_ERR; + } + + /* read the second word of the message from the NPE's outFIFO */ + IX_NPEMH_REGISTER_READ (npeOutFifo, &message->data[1]); + + /* record in the stats the maximum number of retries needed */ + if (ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries < retriesCount) + { + ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = retriesCount; + } + + /* update statistical info */ + ixNpeMhConfigStats[npeId].outFifoReads++; + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhConfigShow + */ + +void ixNpeMhConfigShow ( + IxNpeMhNpeId npeId) +{ + /* show the message fifo read counter */ + IX_NPEMH_SHOW ("Message FIFO reads", + ixNpeMhConfigStats[npeId].outFifoReads); + + /* show the message fifo write counter */ + IX_NPEMH_SHOW ("Message FIFO writes", + ixNpeMhConfigStats[npeId].inFifoWrites); + + /* show the max retries performed when inFIFO full */ + IX_NPEMH_SHOW ("Max inFIFO Full retries", + ixNpeMhConfigStats[npeId].maxInFifoFullRetries); + + /* show the max retries performed when outFIFO empty */ + IX_NPEMH_SHOW ("Max outFIFO Empty retries", + ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries); + + /* show the current status of the inFifo */ + ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, + "InFifo is %s and %s\n", + (ixNpeMhConfigInFifoIsEmpty (npeId) ? + (int) "EMPTY" : (int) "NOT EMPTY"), + (ixNpeMhConfigInFifoIsFull (npeId) ? + (int) "FULL" : (int) "NOT FULL"), + 0, 0, 0, 0); + + /* show the current status of the outFifo */ + ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, + "OutFifo is %s and %s\n", + (ixNpeMhConfigOutFifoIsEmpty (npeId) ? + (int) "EMPTY" : (int) "NOT EMPTY"), + (ixNpeMhConfigOutFifoIsFull (npeId) ? + (int) "FULL" : (int) "NOT FULL"), + 0, 0, 0, 0); +} + +/* + * Function definition: ixNpeMhConfigShowReset + */ + +void ixNpeMhConfigShowReset ( + IxNpeMhNpeId npeId) +{ + /* reset the message fifo read counter */ + ixNpeMhConfigStats[npeId].outFifoReads = 0; + + /* reset the message fifo write counter */ + ixNpeMhConfigStats[npeId].inFifoWrites = 0; + + /* reset the max inFIFO Full retries counter */ + ixNpeMhConfigStats[npeId].maxInFifoFullRetries = 0; + + /* reset the max outFIFO empty retries counter */ + ixNpeMhConfigStats[npeId].maxOutFifoEmptyRetries = 0; +} + + diff --git a/drivers/net/npe/IxNpeMhReceive.c b/drivers/net/npe/IxNpeMhReceive.c new file mode 100644 index 0000000000..57c8be30e5 --- /dev/null +++ b/drivers/net/npe/IxNpeMhReceive.c @@ -0,0 +1,320 @@ +/** + * @file IxNpeMhReceive.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the private API for the + * Receive module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required. + */ + + +/* + * Put the user defined include files required. + */ +#include "IxOsal.h" +#include "IxNpeMhMacros_p.h" +#include "IxNpeMhConfig_p.h" +#include "IxNpeMhReceive_p.h" +#include "IxNpeMhSolicitedCbMgr_p.h" +#include "IxNpeMhUnsolicitedCbMgr_p.h" + +/* + * #defines and macros used in this file. + */ + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @struct IxNpeMhReceiveStats + * + * @brief This structure is used to maintain statistics for the Receive + * module. + */ + +typedef struct +{ + UINT32 isrs; /**< receive ISR invocations */ + UINT32 receives; /**< receive messages invocations */ + UINT32 messages; /**< messages received */ + UINT32 solicited; /**< solicited messages received */ + UINT32 unsolicited; /**< unsolicited messages received */ + UINT32 callbacks; /**< callbacks invoked */ +} IxNpeMhReceiveStats; + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +PRIVATE IxNpeMhReceiveStats ixNpeMhReceiveStats[IX_NPEMH_NUM_NPES]; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ +PRIVATE +void ixNpeMhReceiveIsr (int npeId); + +PRIVATE +void ixNpeMhReceiveIsr (int npeId) +{ + int lockKey; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhReceiveIsr\n"); + + lockKey = ixOsalIrqLock (); + + /* invoke the message receive routine to get messages from the NPE */ + ixNpeMhReceiveMessagesReceive (npeId); + + /* update statistical info */ + ixNpeMhReceiveStats[npeId].isrs++; + + ixOsalIrqUnlock (lockKey); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhReceiveIsr\n"); +} + +/* + * Function definition: ixNpeMhReceiveInitialize + */ + +void ixNpeMhReceiveInitialize (void) +{ + IxNpeMhNpeId npeId = 0; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhReceiveInitialize\n"); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* register our internal ISR for the NPE to handle "outFIFO not */ + /* empty" interrupts */ + ixNpeMhConfigIsrRegister (npeId, ixNpeMhReceiveIsr); + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhReceiveInitialize\n"); +} + +/* + * Function definition: ixNpeMhReceiveMessagesReceive + */ + +IX_STATUS ixNpeMhReceiveMessagesReceive ( + IxNpeMhNpeId npeId) +{ + IxNpeMhMessage message = { { 0, 0 } }; + IxNpeMhMessageId messageId = 0; + IxNpeMhCallback callback = NULL; + IX_STATUS status; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhReceiveMessagesReceive\n"); + + /* update statistical info */ + ixNpeMhReceiveStats[npeId].receives++; + + /* while the NPE has messages in its outFIFO */ + while (!ixNpeMhConfigOutFifoIsEmpty (npeId)) + { + /* read a message from the NPE's outFIFO */ + status = ixNpeMhConfigOutFifoRead (npeId, &message); + + if (IX_SUCCESS != status) + { + return status; + } + + /* get the ID of the message */ + messageId = ixNpeMhConfigMessageIdGet (message); + + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, + "Received message from NPE %d with ID 0x%02X\n", + npeId, messageId); + + /* update statistical info */ + ixNpeMhReceiveStats[npeId].messages++; + + /* try to find a matching unsolicited callback for this message. */ + + /* we assume the message is unsolicited. only if there is no */ + /* unsolicited callback for this message type do we assume the */ + /* message is solicited. it is much faster to check for an */ + /* unsolicited callback, so doing this check first should result */ + /* in better performance. */ + + ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( + npeId, messageId, &callback); + + if (callback != NULL) + { + IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, + "Found matching unsolicited callback\n"); + + /* update statistical info */ + ixNpeMhReceiveStats[npeId].unsolicited++; + } + + /* if no unsolicited callback was found try to find a matching */ + /* solicited callback for this message */ + if (callback == NULL) + { + ixNpeMhSolicitedCbMgrCallbackRetrieve ( + npeId, messageId, &callback); + + if (callback != NULL) + { + IX_NPEMH_TRACE0 (IX_NPEMH_DEBUG, + "Found matching solicited callback\n"); + + /* update statistical info */ + ixNpeMhReceiveStats[npeId].solicited++; + } + } + + /* if a callback (either unsolicited or solicited) was found */ + if (callback != NULL) + { + /* invoke the callback to pass the message back to the client */ + callback (npeId, message); + + /* update statistical info */ + ixNpeMhReceiveStats[npeId].callbacks++; + } + else /* no callback (neither unsolicited nor solicited) was found */ + { + IX_NPEMH_TRACE2 (IX_NPEMH_WARNING, + "No matching callback for NPE %d" + " and ID 0x%02X, discarding message\n", + npeId, messageId); + + /* the message will be discarded. this is normal behaviour */ + /* if the client passes a NULL solicited callback when */ + /* sending a message. this indicates that the client is not */ + /* interested in receiving the response. alternatively a */ + /* NULL callback here may signify an unsolicited message */ + /* with no appropriate registered callback. */ + } + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhReceiveMessagesReceive\n"); + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhReceiveShow + */ + +void ixNpeMhReceiveShow ( + IxNpeMhNpeId npeId) +{ + /* show the ISR invocation counter */ + IX_NPEMH_SHOW ("Receive ISR invocations", + ixNpeMhReceiveStats[npeId].isrs); + + /* show the receive message invocation counter */ + IX_NPEMH_SHOW ("Receive messages invocations", + ixNpeMhReceiveStats[npeId].receives); + + /* show the message received counter */ + IX_NPEMH_SHOW ("Messages received", + ixNpeMhReceiveStats[npeId].messages); + + /* show the solicited message counter */ + IX_NPEMH_SHOW ("Solicited messages received", + ixNpeMhReceiveStats[npeId].solicited); + + /* show the unsolicited message counter */ + IX_NPEMH_SHOW ("Unsolicited messages received", + ixNpeMhReceiveStats[npeId].unsolicited); + + /* show the callback invoked counter */ + IX_NPEMH_SHOW ("Callbacks invoked", + ixNpeMhReceiveStats[npeId].callbacks); + + /* show the message discarded counter */ + IX_NPEMH_SHOW ("Received messages discarded", + (ixNpeMhReceiveStats[npeId].messages - + ixNpeMhReceiveStats[npeId].callbacks)); +} + +/* + * Function definition: ixNpeMhReceiveShowReset + */ + +void ixNpeMhReceiveShowReset ( + IxNpeMhNpeId npeId) +{ + /* reset the ISR invocation counter */ + ixNpeMhReceiveStats[npeId].isrs = 0; + + /* reset the receive message invocation counter */ + ixNpeMhReceiveStats[npeId].receives = 0; + + /* reset the message received counter */ + ixNpeMhReceiveStats[npeId].messages = 0; + + /* reset the solicited message counter */ + ixNpeMhReceiveStats[npeId].solicited = 0; + + /* reset the unsolicited message counter */ + ixNpeMhReceiveStats[npeId].unsolicited = 0; + + /* reset the callback invoked counter */ + ixNpeMhReceiveStats[npeId].callbacks = 0; +} diff --git a/drivers/net/npe/IxNpeMhSend.c b/drivers/net/npe/IxNpeMhSend.c new file mode 100644 index 0000000000..318913ac84 --- /dev/null +++ b/drivers/net/npe/IxNpeMhSend.c @@ -0,0 +1,307 @@ +/** + * @file IxNpeMhSend.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the private API for the + * Send module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required. + */ + + +/* + * Put the user defined include files required. + */ + +#include "IxNpeMhMacros_p.h" + +#include "IxNpeMhConfig_p.h" +#include "IxNpeMhSend_p.h" +#include "IxNpeMhSolicitedCbMgr_p.h" + +/* + * #defines and macros used in this file. + */ + +/** + * @def IX_NPEMH_INFIFO_RETRY_DELAY_US + * + * @brief Amount of time (uSecs) to delay between retries + * while inFIFO is Full when attempting to send a message + */ +#define IX_NPEMH_INFIFO_RETRY_DELAY_US (1) + + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @struct IxNpeMhSendStats + * + * @brief This structure is used to maintain statistics for the Send + * module. + */ + +typedef struct +{ + UINT32 sends; /**< send invocations */ + UINT32 sendWithResponses; /**< send with response invocations */ + UINT32 queueFulls; /**< fifo queue full occurrences */ + UINT32 queueFullRetries; /**< fifo queue full retry occurrences */ + UINT32 maxQueueFullRetries; /**< max fifo queue full retries */ + UINT32 callbackFulls; /**< callback list full occurrences */ +} IxNpeMhSendStats; + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +PRIVATE IxNpeMhSendStats ixNpeMhSendStats[IX_NPEMH_NUM_NPES]; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ +PRIVATE +BOOL ixNpeMhSendInFifoIsFull( + IxNpeMhNpeId npeId, + UINT32 maxSendRetries); + +/* + * Function definition: ixNpeMhSendInFifoIsFull + */ + +PRIVATE +BOOL ixNpeMhSendInFifoIsFull( + IxNpeMhNpeId npeId, + UINT32 maxSendRetries) +{ + BOOL isFull = FALSE; + UINT32 numRetries = 0; + + /* check the NPE's inFIFO */ + isFull = ixNpeMhConfigInFifoIsFull (npeId); + + /* we retry a few times, just to give the NPE a chance to read from */ + /* the FIFO if the FIFO is currently full */ + while (isFull && (numRetries++ < maxSendRetries)) + { + if (numRetries >= IX_NPEMH_SEND_RETRIES_DEFAULT) + { + /* Delay here for as short a time as possible (1 us). */ + /* Adding a delay here should ensure we are not hogging */ + /* the AHB bus while we are retrying */ + ixOsalBusySleep (IX_NPEMH_INFIFO_RETRY_DELAY_US); + } + + /* re-check the NPE's inFIFO */ + isFull = ixNpeMhConfigInFifoIsFull (npeId); + + /* update statistical info */ + ixNpeMhSendStats[npeId].queueFullRetries++; + } + + /* record the highest number of retries that occurred */ + if (ixNpeMhSendStats[npeId].maxQueueFullRetries < numRetries) + { + ixNpeMhSendStats[npeId].maxQueueFullRetries = numRetries; + } + + if (isFull) + { + /* update statistical info */ + ixNpeMhSendStats[npeId].queueFulls++; + } + + return isFull; +} + +/* + * Function definition: ixNpeMhSendMessageSend + */ + +IX_STATUS ixNpeMhSendMessageSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + UINT32 maxSendRetries) +{ + IX_STATUS status; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhSendMessageSend\n"); + + /* update statistical info */ + ixNpeMhSendStats[npeId].sends++; + + /* check if the NPE's inFIFO is full - if so return an error */ + if (ixNpeMhSendInFifoIsFull (npeId, maxSendRetries)) + { + IX_NPEMH_TRACE0 (IX_NPEMH_WARNING, "NPE's inFIFO is full\n"); + return IX_FAIL; + } + + /* write the message to the NPE's inFIFO */ + status = ixNpeMhConfigInFifoWrite (npeId, message); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhSendMessageSend\n"); + + return status; +} + +/* + * Function definition: ixNpeMhSendMessageWithResponseSend + */ + +IX_STATUS ixNpeMhSendMessageWithResponseSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback, + UINT32 maxSendRetries) +{ + IX_STATUS status = IX_SUCCESS; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhSendMessageWithResponseSend\n"); + + /* update statistical info */ + ixNpeMhSendStats[npeId].sendWithResponses++; + + /* sr: this sleep will call the receive routine (no interrupts used!!!) */ + ixOsalSleep (IX_NPEMH_INFIFO_RETRY_DELAY_US); + + /* check if the NPE's inFIFO is full - if so return an error */ + if (ixNpeMhSendInFifoIsFull (npeId, maxSendRetries)) + { + IX_NPEMH_TRACE0 (IX_NPEMH_WARNING, "NPE's inFIFO is full\n"); + return IX_FAIL; + } + + /* save the solicited callback */ + status = ixNpeMhSolicitedCbMgrCallbackSave ( + npeId, solicitedMessageId, solicitedCallback); + if (status != IX_SUCCESS) + { + IX_NPEMH_ERROR_REPORT ("Failed to save solicited callback\n"); + + /* update statistical info */ + ixNpeMhSendStats[npeId].callbackFulls++; + + return status; + } + + /* write the message to the NPE's inFIFO */ + status = ixNpeMhConfigInFifoWrite (npeId, message); + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhSendMessageWithResponseSend\n"); + + return status; +} + +/* + * Function definition: ixNpeMhSendShow + */ + +void ixNpeMhSendShow ( + IxNpeMhNpeId npeId) +{ + /* show the message send invocation counter */ + IX_NPEMH_SHOW ("Send invocations", + ixNpeMhSendStats[npeId].sends); + + /* show the message send with response invocation counter */ + IX_NPEMH_SHOW ("Send with response invocations", + ixNpeMhSendStats[npeId].sendWithResponses); + + /* show the fifo queue full occurrence counter */ + IX_NPEMH_SHOW ("Fifo queue full occurrences", + ixNpeMhSendStats[npeId].queueFulls); + + /* show the fifo queue full retry occurrence counter */ + IX_NPEMH_SHOW ("Fifo queue full retry occurrences", + ixNpeMhSendStats[npeId].queueFullRetries); + + /* show the fifo queue full maximum retries counter */ + IX_NPEMH_SHOW ("Maximum fifo queue full retries", + ixNpeMhSendStats[npeId].maxQueueFullRetries); + + /* show the callback list full occurrence counter */ + IX_NPEMH_SHOW ("Solicited callback list full occurrences", + ixNpeMhSendStats[npeId].callbackFulls); +} + +/* + * Function definition: ixNpeMhSendShowReset + */ + +void ixNpeMhSendShowReset ( + IxNpeMhNpeId npeId) +{ + /* reset the message send invocation counter */ + ixNpeMhSendStats[npeId].sends = 0; + + /* reset the message send with response invocation counter */ + ixNpeMhSendStats[npeId].sendWithResponses = 0; + + /* reset the fifo queue full occurrence counter */ + ixNpeMhSendStats[npeId].queueFulls = 0; + + /* reset the fifo queue full retry occurrence counter */ + ixNpeMhSendStats[npeId].queueFullRetries = 0; + + /* reset the max fifo queue full retries counter */ + ixNpeMhSendStats[npeId].maxQueueFullRetries = 0; + + /* reset the callback list full occurrence counter */ + ixNpeMhSendStats[npeId].callbackFulls = 0; +} diff --git a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c new file mode 100644 index 0000000000..8e083a63bf --- /dev/null +++ b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c @@ -0,0 +1,358 @@ +/** + * @file IxNpeMhSolicitedCbMgr.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the private API for the + * Solicited Callback Manager module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ +#ifndef IXNPEMHCONFIG_P_H +# define IXNPEMHSOLICITEDCBMGR_C +#else +# error "Error, IxNpeMhConfig_p.h should not be included before this definition." +#endif + +/* + * Put the system defined include files required. + */ + + +/* + * Put the user defined include files required. + */ + +#include "IxOsal.h" + +#include "IxNpeMhMacros_p.h" +#include "IxNpeMhSolicitedCbMgr_p.h" +#include "IxNpeMhConfig_p.h" +/* + * #defines and macros used in this file. + */ + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @struct IxNpeMhSolicitedCallbackListEntry + * + * @brief This structure is used to store the information associated with + * an entry in the callback list. This consists of the ID of the send + * message (which indicates the ID of the corresponding response message) + * and the callback function pointer itself. + * + */ + +typedef struct IxNpeMhSolicitedCallbackListEntry +{ + /** message ID */ + IxNpeMhMessageId messageId; + + /** callback function pointer */ + IxNpeMhCallback callback; + + /** pointer to next entry in the list */ + struct IxNpeMhSolicitedCallbackListEntry *next; +} IxNpeMhSolicitedCallbackListEntry; + +/** + * @struct IxNpeMhSolicitedCallbackList + * + * @brief This structure is used to maintain the list of response + * callbacks. The number of entries in this list will be variable, and + * they will be stored in a linked list fashion for ease of addition and + * removal. The entries themselves are statically allocated, and are + * organised into a "free" list and a "callback" list. Adding an entry + * means taking an entry from the "free" list and adding it to the + * "callback" list. Removing an entry means removing it from the + * "callback" list and returning it to the "free" list. + */ + +typedef struct +{ + /** pointer to the head of the free list */ + IxNpeMhSolicitedCallbackListEntry *freeHead; + + /** pointer to the head of the callback list */ + IxNpeMhSolicitedCallbackListEntry *callbackHead; + + /** pointer to the tail of the callback list */ + IxNpeMhSolicitedCallbackListEntry *callbackTail; + + /** array of entries - the first entry is used as a dummy entry to */ + /* avoid the scenario of having an empty list, hence '+ 1' */ + IxNpeMhSolicitedCallbackListEntry entries[IX_NPEMH_MAX_CALLBACKS + 1]; +} IxNpeMhSolicitedCallbackList; + +/** + * @struct IxNpeMhSolicitedCbMgrStats + * + * @brief This structure is used to maintain statistics for the Solicited + * Callback Manager module. + */ + +typedef struct +{ + UINT32 saves; /**< callback list saves */ + UINT32 retrieves; /**< callback list retrieves */ +} IxNpeMhSolicitedCbMgrStats; + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +PRIVATE IxNpeMhSolicitedCallbackList +ixNpeMhSolicitedCbMgrCallbackLists[IX_NPEMH_NUM_NPES]; + +PRIVATE IxNpeMhSolicitedCbMgrStats +ixNpeMhSolicitedCbMgrStats[IX_NPEMH_NUM_NPES]; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ + +/* + * Function definition: ixNpeMhSolicitedCbMgrInitialize + */ + +void ixNpeMhSolicitedCbMgrInitialize (void) +{ + IxNpeMhNpeId npeId; + UINT32 localIndex; + IxNpeMhSolicitedCallbackList *list = NULL; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhSolicitedCbMgrInitialize\n"); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* initialise a pointer to the list for convenience */ + list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId]; + + /* for each entry in the list, after the dummy entry ... */ + for (localIndex = 1; localIndex <= IX_NPEMH_MAX_CALLBACKS; localIndex++) + { + /* initialise the entry */ + list->entries[localIndex].messageId = 0x00; + list->entries[localIndex].callback = NULL; + + /* if this entry is before the last entry */ + if (localIndex < IX_NPEMH_MAX_CALLBACKS) + { + /* chain this entry to the following entry */ + list->entries[localIndex].next = &(list->entries[localIndex + 1]); + } + else /* this entry is the last entry */ + { + /* the last entry isn't chained to anything */ + list->entries[localIndex].next = NULL; + } + } + + /* set the free list pointer to point to the first real entry */ + /* (all real entries begin chained together on the free list) */ + list->freeHead = &(list->entries[1]); + + /* set the callback list pointers to point to the dummy entry */ + /* (the callback list is initially empty) */ + list->callbackHead = &(list->entries[0]); + list->callbackTail = &(list->entries[0]); + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhSolicitedCbMgrInitialize\n"); +} + +/* + * Function definition: ixNpeMhSolicitedCbMgrCallbackSave + */ + +IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback) +{ + IxNpeMhSolicitedCallbackList *list = NULL; + IxNpeMhSolicitedCallbackListEntry *callbackEntry = NULL; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhSolicitedCbMgrCallbackSave\n"); + + /* initialise a pointer to the list for convenience */ + list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId]; + + /* check to see if there are any entries in the free list */ + if (list->freeHead == NULL) + { + IX_NPEMH_ERROR_REPORT ("Solicited callback list is full\n"); + return IX_FAIL; + } + + /* there is an entry in the free list we can use */ + + /* update statistical info */ + ixNpeMhSolicitedCbMgrStats[npeId].saves++; + + /* remove a callback entry from the start of the free list */ + callbackEntry = list->freeHead; + list->freeHead = callbackEntry->next; + + /* fill in the callback entry with the new data */ + callbackEntry->messageId = solicitedMessageId; + callbackEntry->callback = solicitedCallback; + + /* the new callback entry will be added to the tail of the callback */ + /* list, so it isn't chained to anything */ + callbackEntry->next = NULL; + + /* chain new callback entry to the last entry of the callback list */ + list->callbackTail->next = callbackEntry; + list->callbackTail = callbackEntry; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhSolicitedCbMgrCallbackSave\n"); + + return IX_SUCCESS; +} + +/* + * Function definition: ixNpeMhSolicitedCbMgrCallbackRetrieve + */ + +void ixNpeMhSolicitedCbMgrCallbackRetrieve ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback *solicitedCallback) +{ + IxNpeMhSolicitedCallbackList *list = NULL; + IxNpeMhSolicitedCallbackListEntry *callbackEntry = NULL; + IxNpeMhSolicitedCallbackListEntry *previousEntry = NULL; + + /* initialise a pointer to the list for convenience */ + list = &ixNpeMhSolicitedCbMgrCallbackLists[npeId]; + + /* initialise the callback entry to the first entry of the callback */ + /* list - we must skip over the dummy entry, which is the previous */ + callbackEntry = list->callbackHead->next; + previousEntry = list->callbackHead; + + /* traverse the callback list looking for an entry with a matching */ + /* message ID. note we also save the previous entry's pointer to */ + /* allow us to unchain the matching entry from the callback list */ + while ((callbackEntry != NULL) && + (callbackEntry->messageId != solicitedMessageId)) + { + previousEntry = callbackEntry; + callbackEntry = callbackEntry->next; + } + + /* if we didn't find a matching callback entry */ + if (callbackEntry == NULL) + { + /* return a NULL callback in the outgoing parameter */ + *solicitedCallback = NULL; + } + else /* we found a matching callback entry */ + { + /* update statistical info */ + ixNpeMhSolicitedCbMgrStats[npeId].retrieves++; + + /* return the callback in the outgoing parameter */ + *solicitedCallback = callbackEntry->callback; + + /* unchain callback entry by chaining previous entry to next */ + previousEntry->next = callbackEntry->next; + + /* if the callback entry is at the tail of the list */ + if (list->callbackTail == callbackEntry) + { + /* update the tail of the callback list */ + list->callbackTail = previousEntry; + } + + /* re-initialise the callback entry */ + callbackEntry->messageId = 0x00; + callbackEntry->callback = NULL; + + /* add the callback entry to the start of the free list */ + callbackEntry->next = list->freeHead; + list->freeHead = callbackEntry; + } +} + +/* + * Function definition: ixNpeMhSolicitedCbMgrShow + */ + +void ixNpeMhSolicitedCbMgrShow ( + IxNpeMhNpeId npeId) +{ + /* show the solicited callback list save counter */ + IX_NPEMH_SHOW ("Solicited callback list saves", + ixNpeMhSolicitedCbMgrStats[npeId].saves); + + /* show the solicited callback list retrieve counter */ + IX_NPEMH_SHOW ("Solicited callback list retrieves", + ixNpeMhSolicitedCbMgrStats[npeId].retrieves); +} + +/* + * Function definition: ixNpeMhSolicitedCbMgrShowReset + */ + +void ixNpeMhSolicitedCbMgrShowReset ( + IxNpeMhNpeId npeId) +{ + /* reset the solicited callback list save counter */ + ixNpeMhSolicitedCbMgrStats[npeId].saves = 0; + + /* reset the solicited callback list retrieve counter */ + ixNpeMhSolicitedCbMgrStats[npeId].retrieves = 0; +} diff --git a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c new file mode 100644 index 0000000000..d37f9f9306 --- /dev/null +++ b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c @@ -0,0 +1,246 @@ +/** + * @file IxNpeMhUnsolicitedCbMgr.c + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the implementation of the private API for + * the Unsolicited Callback Manager module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Put the system defined include files required. + */ + + +/* + * Put the user defined include files required. + */ +#include "IxOsal.h" + +#include "IxNpeMhMacros_p.h" + +#include "IxNpeMhUnsolicitedCbMgr_p.h" + + +/* + * #defines and macros used in this file. + */ + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @struct IxNpeMhUnsolicitedCallbackTable + * + * @brief This structure is used to maintain the list of registered + * callbacks. One entry exists for each message ID, and a NULL entry will + * signify that no callback has been registered for that ID. + */ + +typedef struct +{ + /** array of entries */ + IxNpeMhCallback entries[IX_NPEMH_MAX_MESSAGE_ID + 1]; +} IxNpeMhUnsolicitedCallbackTable; + +/** + * @struct IxNpeMhUnsolicitedCbMgrStats + * + * @brief This structure is used to maintain statistics for the Unsolicited + * Callback Manager module. + */ + +typedef struct +{ + UINT32 saves; /**< callback table saves */ + UINT32 overwrites; /**< callback table overwrites */ +} IxNpeMhUnsolicitedCbMgrStats; + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +PRIVATE IxNpeMhUnsolicitedCallbackTable +ixNpeMhUnsolicitedCallbackTables[IX_NPEMH_NUM_NPES]; + +PRIVATE IxNpeMhUnsolicitedCbMgrStats +ixNpeMhUnsolicitedCbMgrStats[IX_NPEMH_NUM_NPES]; + +/* + * Extern function prototypes. + */ + +/* + * Static function prototypes. + */ + +/* + * Function definition: ixNpeMhUnsolicitedCbMgrInitialize + */ + +void ixNpeMhUnsolicitedCbMgrInitialize (void) +{ + IxNpeMhNpeId npeId = 0; + IxNpeMhUnsolicitedCallbackTable *table = NULL; + IxNpeMhMessageId messageId = 0; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhUnsolicitedCbMgrInitialize\n"); + + /* for each NPE ... */ + for (npeId = 0; npeId < IX_NPEMH_NUM_NPES; npeId++) + { + /* initialise a pointer to the table for convenience */ + table = &ixNpeMhUnsolicitedCallbackTables[npeId]; + + /* for each message ID ... */ + for (messageId = IX_NPEMH_MIN_MESSAGE_ID; + messageId <= IX_NPEMH_MAX_MESSAGE_ID; messageId++) + { + /* initialise the callback for this message ID to NULL */ + table->entries[messageId] = NULL; + } + } + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhUnsolicitedCbMgrInitialize\n"); +} + +/* + * Function definition: ixNpeMhUnsolicitedCbMgrCallbackSave + */ + +void ixNpeMhUnsolicitedCbMgrCallbackSave ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId unsolicitedMessageId, + IxNpeMhCallback unsolicitedCallback) +{ + IxNpeMhUnsolicitedCallbackTable *table = NULL; + + /* initialise a pointer to the table for convenience */ + table = &ixNpeMhUnsolicitedCallbackTables[npeId]; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Entering " + "ixNpeMhUnsolicitedCbMgrCallbackSave\n"); + + /* update statistical info */ + ixNpeMhUnsolicitedCbMgrStats[npeId].saves++; + + /* check if there is a callback already registered for this NPE and */ + /* message ID */ + if (table->entries[unsolicitedMessageId] != NULL) + { + /* if we are overwriting an existing callback */ + if (unsolicitedCallback != NULL) + { + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "Unsolicited callback " + "overwriting existing callback for NPE ID %d " + "message ID 0x%02X\n", npeId, unsolicitedMessageId); + } + else /* if we are clearing an existing callback */ + { + IX_NPEMH_TRACE2 (IX_NPEMH_DEBUG, "NULL unsolicited callback " + "clearing existing callback for NPE ID %d " + "message ID 0x%02X\n", npeId, unsolicitedMessageId); + } + + /* update statistical info */ + ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites++; + } + + /* save the callback into the table */ + table->entries[unsolicitedMessageId] = unsolicitedCallback; + + IX_NPEMH_TRACE0 (IX_NPEMH_FN_ENTRY_EXIT, "Exiting " + "ixNpeMhUnsolicitedCbMgrCallbackSave\n"); +} + +/* + * Function definition: ixNpeMhUnsolicitedCbMgrCallbackRetrieve + */ + +void ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId unsolicitedMessageId, + IxNpeMhCallback *unsolicitedCallback) +{ + IxNpeMhUnsolicitedCallbackTable *table = NULL; + + /* initialise a pointer to the table for convenience */ + table = &ixNpeMhUnsolicitedCallbackTables[npeId]; + + /* retrieve the callback from the table */ + *unsolicitedCallback = table->entries[unsolicitedMessageId]; +} + +/* + * Function definition: ixNpeMhUnsolicitedCbMgrShow + */ + +void ixNpeMhUnsolicitedCbMgrShow ( + IxNpeMhNpeId npeId) +{ + /* show the unsolicited callback table save counter */ + IX_NPEMH_SHOW ("Unsolicited callback table saves", + ixNpeMhUnsolicitedCbMgrStats[npeId].saves); + + /* show the unsolicited callback table overwrite counter */ + IX_NPEMH_SHOW ("Unsolicited callback table overwrites", + ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites); +} + +/* + * Function definition: ixNpeMhUnsolicitedCbMgrShowReset + */ + +void ixNpeMhUnsolicitedCbMgrShowReset ( + IxNpeMhNpeId npeId) +{ + /* reset the unsolicited callback table save counter */ + ixNpeMhUnsolicitedCbMgrStats[npeId].saves = 0; + + /* reset the unsolicited callback table overwrite counter */ + ixNpeMhUnsolicitedCbMgrStats[npeId].overwrites = 0; +} diff --git a/drivers/net/npe/IxOsalBufferMgt.c b/drivers/net/npe/IxOsalBufferMgt.c new file mode 100644 index 0000000000..fa8db477af --- /dev/null +++ b/drivers/net/npe/IxOsalBufferMgt.c @@ -0,0 +1,800 @@ +/** + * @file IxOsalBufferMgt.c + * + * @brief Default buffer pool management and buffer management + * Implementation. + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* + * OS may choose to use default bufferMgt by defining + * IX_OSAL_USE_DEFAULT_BUFFER_MGT in IxOsalOsBufferMgt.h + */ + +#include "IxOsal.h" + +#define IX_OSAL_BUFFER_FREE_PROTECTION /* Define this to enable Illegal MBuf Freed Protection*/ + +/* + * The implementation is only used when the following + * is defined. + */ +#ifdef IX_OSAL_USE_DEFAULT_BUFFER_MGT + + +#define IX_OSAL_MBUF_SYS_SIGNATURE (0x8BADF00D) +#define IX_OSAL_MBUF_SYS_SIGNATURE_MASK (0xEFFFFFFF) +#define IX_OSAL_MBUF_USED_FLAG (0x10000000) +#define IX_OSAL_MBUF_SYS_SIGNATURE_INIT(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr) = (UINT32)IX_OSAL_MBUF_SYS_SIGNATURE + +/* +* This implementation is protect, the buffer pool management's ixOsalMBufFree +* against an invalid MBUF pointer argument that already has been freed earlier +* or in other words resides in the free pool of MBUFs. This added feature, +* checks the MBUF "USED" FLAG. The Flag tells if the MBUF is still not freed +* back to the Buffer Pool. +* Disable this feature for performance reasons by undef +* IX_OSAL_BUFFER_FREE_PROTECTION macro. +*/ +#ifdef IX_OSAL_BUFFER_FREE_PROTECTION /*IX_OSAL_BUFFER_FREE_PROTECTION With Buffer Free protection*/ + +#define IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) (IX_OSAL_MBUF_SIGNATURE (bufPtr)&(IX_OSAL_MBUF_SYS_SIGNATURE_MASK) ) +#define IX_OSAL_MBUF_SET_SYS_SIGNATURE(bufPtr) do { \ + IX_OSAL_MBUF_SIGNATURE (bufPtr)&(~IX_OSAL_MBUF_SYS_SIGNATURE_MASK);\ + IX_OSAL_MBUF_SIGNATURE (bufPtr)|=IX_OSAL_MBUF_SYS_SIGNATURE; \ + }while(0) + +#define IX_OSAL_MBUF_SET_USED_FLAG(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr)|=IX_OSAL_MBUF_USED_FLAG +#define IX_OSAL_MBUF_CLEAR_USED_FLAG(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr)&=~IX_OSAL_MBUF_USED_FLAG +#define IX_OSAL_MBUF_ISSET_USED_FLAG(bufPtr) (IX_OSAL_MBUF_SIGNATURE (bufPtr)&IX_OSAL_MBUF_USED_FLAG) + +#else + +#define IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr) +#define IX_OSAL_MBUF_SET_SYS_SIGNATURE(bufPtr) IX_OSAL_MBUF_SIGNATURE (bufPtr) = IX_OSAL_MBUF_SYS_SIGNATURE + +#endif /*IX_OSAL_BUFFER_FREE_PROTECTION With Buffer Free protection*/ +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +/* + * A unit of 32, used to provide bit-shift for pool + * management. Needs some work if users want more than 32 pools. + */ +#define IX_OSAL_BUFF_FREE_BITS 32 + +PRIVATE UINT32 ixOsalBuffFreePools[IX_OSAL_MBUF_MAX_POOLS / + IX_OSAL_BUFF_FREE_BITS]; + +PUBLIC IX_OSAL_MBUF_POOL ixOsalBuffPools[IX_OSAL_MBUF_MAX_POOLS]; + +static int ixOsalBuffPoolsInUse = 0; + +#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY +PRIVATE IX_OSAL_MBUF * +ixOsalBuffPoolMbufInit (UINT32 mbufSizeAligned, + UINT32 dataSizeAligned, + IX_OSAL_MBUF_POOL *poolPtr); +#endif + +PRIVATE IX_OSAL_MBUF_POOL * ixOsalPoolAlloc (void); + +/* + * Function definition: ixOsalPoolAlloc + */ + +/****************************/ + +PRIVATE IX_OSAL_MBUF_POOL * +ixOsalPoolAlloc (void) +{ + register unsigned int i = 0; + + /* + * Scan for the first free buffer. Free buffers are indicated by 0 + * on the corrsponding bit in ixOsalBuffFreePools. + */ + if (ixOsalBuffPoolsInUse >= IX_OSAL_MBUF_MAX_POOLS) + { + /* + * Fail to grab a ptr this time + */ + return NULL; + } + + while (ixOsalBuffFreePools[i / IX_OSAL_BUFF_FREE_BITS] & + (1 << (i % IX_OSAL_BUFF_FREE_BITS))) + i++; + /* + * Free buffer found. Mark it as busy and initialize. + */ + ixOsalBuffFreePools[i / IX_OSAL_BUFF_FREE_BITS] |= + (1 << (i % IX_OSAL_BUFF_FREE_BITS)); + + memset (&ixOsalBuffPools[i], 0, sizeof (IX_OSAL_MBUF_POOL)); + + ixOsalBuffPools[i].poolIdx = i; + ixOsalBuffPoolsInUse++; + + return &ixOsalBuffPools[i]; +} + + +#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY +PRIVATE IX_OSAL_MBUF * +ixOsalBuffPoolMbufInit (UINT32 mbufSizeAligned, + UINT32 dataSizeAligned, + IX_OSAL_MBUF_POOL *poolPtr) +{ + UINT8 *dataPtr; + IX_OSAL_MBUF *realMbufPtr; + /* Allocate cache-aligned memory for mbuf header */ + realMbufPtr = (IX_OSAL_MBUF *) IX_OSAL_CACHE_DMA_MALLOC (mbufSizeAligned); + IX_OSAL_ASSERT (realMbufPtr != NULL); + memset (realMbufPtr, 0, mbufSizeAligned); + + /* Allocate cache-aligned memory for mbuf data */ + dataPtr = (UINT8 *) IX_OSAL_CACHE_DMA_MALLOC (dataSizeAligned); + IX_OSAL_ASSERT (dataPtr != NULL); + memset (dataPtr, 0, dataSizeAligned); + + /* Fill in mbuf header fields */ + IX_OSAL_MBUF_MDATA (realMbufPtr) = dataPtr; + IX_OSAL_MBUF_ALLOCATED_BUFF_DATA (realMbufPtr) = (UINT32)dataPtr; + + IX_OSAL_MBUF_MLEN (realMbufPtr) = dataSizeAligned; + IX_OSAL_MBUF_ALLOCATED_BUFF_LEN (realMbufPtr) = dataSizeAligned; + + IX_OSAL_MBUF_NET_POOL (realMbufPtr) = (IX_OSAL_MBUF_POOL *) poolPtr; + + IX_OSAL_MBUF_SYS_SIGNATURE_INIT(realMbufPtr); + + /* update some statistical information */ + poolPtr->mbufMemSize += mbufSizeAligned; + poolPtr->dataMemSize += dataSizeAligned; + + return realMbufPtr; +} +#endif /* #ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY */ + +/* + * Function definition: ixOsalBuffPoolInit + */ + +PUBLIC IX_OSAL_MBUF_POOL * +ixOsalPoolInit (UINT32 count, UINT32 size, const char *name) +{ + + /* These variables are only used if UX_OSAL_BUFFER_ALLOC_SEPERATELY + * is defined . + */ +#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY + UINT32 i, mbufSizeAligned, dataSizeAligned; + IX_OSAL_MBUF *currentMbufPtr = NULL; +#else + void *poolBufPtr; + void *poolDataPtr; + int mbufMemSize; + int dataMemSize; +#endif + + IX_OSAL_MBUF_POOL *poolPtr = NULL; + + if (count <= 0) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalPoolInit(): " "count = 0 \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + if (name == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalPoolInit(): " "NULL name \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + if (strlen (name) > IX_OSAL_MBUF_POOL_NAME_LEN) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalPoolInit(): " + "ERROR - name length should be no greater than %d \n", + IX_OSAL_MBUF_POOL_NAME_LEN, 0, 0, 0, 0, 0); + return NULL; + } + +/* OS can choose whether to allocate all buffers all together (if it + * can handle a huge single alloc request), or to allocate buffers + * separately by the defining IX_OSAL_BUFFER_ALLOC_SEPARATELY. + */ +#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY + /* Get a pool Ptr */ + poolPtr = ixOsalPoolAlloc (); + + if (poolPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalPoolInit(): " "Fail to Get PoolPtr \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + mbufSizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF)); + dataSizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN(size); + + poolPtr->nextFreeBuf = NULL; + poolPtr->mbufMemPtr = NULL; + poolPtr->dataMemPtr = NULL; + poolPtr->bufDataSize = dataSizeAligned; + poolPtr->totalBufsInPool = count; + poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC; + strcpy (poolPtr->name, name); + + + for (i = 0; i < count; i++) + { + /* create an mbuf */ + currentMbufPtr = ixOsalBuffPoolMbufInit (mbufSizeAligned, + dataSizeAligned, + poolPtr); + +#ifdef IX_OSAL_BUFFER_FREE_PROTECTION +/* Set the Buffer USED Flag. If not, ixOsalMBufFree will fail. + ixOsalMbufFree used here is in a special case whereby, it's + used to add MBUF to the Pool. By specification, ixOsalMbufFree + deallocates an allocated MBUF from Pool. +*/ + IX_OSAL_MBUF_SET_USED_FLAG(currentMbufPtr); +#endif + /* Add it to the pool */ + ixOsalMbufFree (currentMbufPtr); + + /* flush the pool information to RAM */ + IX_OSAL_CACHE_FLUSH (currentMbufPtr, mbufSizeAligned); + } + + /* + * update the number of free buffers in the pool + */ + poolPtr->freeBufsInPool = count; + +#else +/* Otherwise allocate buffers in a continuous block fashion */ + poolBufPtr = IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC (count, mbufMemSize); + IX_OSAL_ASSERT (poolBufPtr != NULL); + poolDataPtr = + IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC (count, size, dataMemSize); + IX_OSAL_ASSERT (poolDataPtr != NULL); + + poolPtr = ixOsalNoAllocPoolInit (poolBufPtr, poolDataPtr, + count, size, name); + if (poolPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalPoolInit(): " "Fail to get pool ptr \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC; + +#endif /* IX_OSAL_BUFFER_ALLOC_SEPARATELY */ + return poolPtr; +} + +PUBLIC IX_OSAL_MBUF_POOL * +ixOsalNoAllocPoolInit (void *poolBufPtr, + void *poolDataPtr, UINT32 count, UINT32 size, const char *name) +{ + UINT32 i, mbufSizeAligned, sizeAligned; + IX_OSAL_MBUF *currentMbufPtr = NULL; + IX_OSAL_MBUF *nextMbufPtr = NULL; + IX_OSAL_MBUF_POOL *poolPtr = NULL; + + /* + * check parameters + */ + if (poolBufPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalNoAllocPoolInit(): " + "ERROR - NULL poolBufPtr \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + if (count <= 0) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalNoAllocPoolInit(): " + "ERROR - count must > 0 \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + if (name == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalNoAllocPoolInit(): " + "ERROR - NULL name ptr \n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + if (strlen (name) > IX_OSAL_MBUF_POOL_NAME_LEN) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalNoAllocPoolInit(): " + "ERROR - name length should be no greater than %d \n", + IX_OSAL_MBUF_POOL_NAME_LEN, 0, 0, 0, 0, 0); + return NULL; + } + + poolPtr = ixOsalPoolAlloc (); + + if (poolPtr == NULL) + { + return NULL; + } + + /* + * Adjust sizes to ensure alignment on cache line boundaries + */ + mbufSizeAligned = + IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF)); + /* + * clear the mbuf memory area + */ + memset (poolBufPtr, 0, mbufSizeAligned * count); + + if (poolDataPtr != NULL) + { + /* + * Adjust sizes to ensure alignment on cache line boundaries + */ + sizeAligned = IX_OSAL_MBUF_POOL_SIZE_ALIGN (size); + /* + * clear the data memory area + */ + memset (poolDataPtr, 0, sizeAligned * count); + } + else + { + sizeAligned = 0; + } + + /* + * initialise pool fields + */ + strcpy ((poolPtr)->name, name); + + poolPtr->dataMemPtr = poolDataPtr; + poolPtr->mbufMemPtr = poolBufPtr; + poolPtr->bufDataSize = sizeAligned; + poolPtr->totalBufsInPool = count; + poolPtr->mbufMemSize = mbufSizeAligned * count; + poolPtr->dataMemSize = sizeAligned * count; + + currentMbufPtr = (IX_OSAL_MBUF *) poolBufPtr; + + poolPtr->nextFreeBuf = currentMbufPtr; + + for (i = 0; i < count; i++) + { + if (i < (count - 1)) + { + nextMbufPtr = + (IX_OSAL_MBUF *) ((unsigned) currentMbufPtr + + mbufSizeAligned); + } + else + { /* last mbuf in chain */ + nextMbufPtr = NULL; + } + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (currentMbufPtr) = nextMbufPtr; + IX_OSAL_MBUF_NET_POOL (currentMbufPtr) = poolPtr; + + IX_OSAL_MBUF_SYS_SIGNATURE_INIT(currentMbufPtr); + + if (poolDataPtr != NULL) + { + IX_OSAL_MBUF_MDATA (currentMbufPtr) = poolDataPtr; + IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(currentMbufPtr) = (UINT32) poolDataPtr; + + IX_OSAL_MBUF_MLEN (currentMbufPtr) = sizeAligned; + IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(currentMbufPtr) = sizeAligned; + + poolDataPtr = (void *) ((unsigned) poolDataPtr + sizeAligned); + } + + currentMbufPtr = nextMbufPtr; + } + + /* + * update the number of free buffers in the pool + */ + poolPtr->freeBufsInPool = count; + + poolPtr->poolAllocType = IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC; + + return poolPtr; +} + +/* + * Get a mbuf ptr from the pool + */ +PUBLIC IX_OSAL_MBUF * +ixOsalMbufAlloc (IX_OSAL_MBUF_POOL * poolPtr) +{ + int lock; + IX_OSAL_MBUF *newBufPtr = NULL; + + /* + * check parameters + */ + if (poolPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalMbufAlloc(): " + "ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + lock = ixOsalIrqLock (); + + newBufPtr = poolPtr->nextFreeBuf; + if (newBufPtr) + { + poolPtr->nextFreeBuf = + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (newBufPtr); + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (newBufPtr) = NULL; + + /* + * update the number of free buffers in the pool + */ + poolPtr->freeBufsInPool--; + } + else + { + /* Return NULL to indicate to caller that request is denied. */ + ixOsalIrqUnlock (lock); + + return NULL; + } + +#ifdef IX_OSAL_BUFFER_FREE_PROTECTION + /* Set Buffer Used Flag to indicate state.*/ + IX_OSAL_MBUF_SET_USED_FLAG(newBufPtr); +#endif + + ixOsalIrqUnlock (lock); + + return newBufPtr; +} + +PUBLIC IX_OSAL_MBUF * +ixOsalMbufFree (IX_OSAL_MBUF * bufPtr) +{ + int lock; + IX_OSAL_MBUF_POOL *poolPtr; + + IX_OSAL_MBUF *nextBufPtr = NULL; + + /* + * check parameters + */ + if (bufPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalMbufFree(): " + "ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0); + return NULL; + } + + + + lock = ixOsalIrqLock (); + +#ifdef IX_OSAL_BUFFER_FREE_PROTECTION + + /* Prevention for Buffer freed more than once*/ + if(!IX_OSAL_MBUF_ISSET_USED_FLAG(bufPtr)) + { + return NULL; + } + IX_OSAL_MBUF_CLEAR_USED_FLAG(bufPtr); +#endif + + poolPtr = IX_OSAL_MBUF_NET_POOL (bufPtr); + + /* + * check the mbuf wrapper signature (if mbuf wrapper was used) + */ + if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC) + { + IX_OSAL_ENSURE ( (IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) == IX_OSAL_MBUF_SYS_SIGNATURE), + "ixOsalBuffPoolBufFree: ERROR - Invalid mbuf signature."); + } + + nextBufPtr = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (bufPtr); + + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR (bufPtr) = poolPtr->nextFreeBuf; + poolPtr->nextFreeBuf = bufPtr; + + /* + * update the number of free buffers in the pool + */ + poolPtr->freeBufsInPool++; + + ixOsalIrqUnlock (lock); + + return nextBufPtr; +} + +PUBLIC void +ixOsalMbufChainFree (IX_OSAL_MBUF * bufPtr) +{ + while ((bufPtr = ixOsalMbufFree (bufPtr))); +} + +/* + * Function definition: ixOsalBuffPoolShow + */ +PUBLIC void +ixOsalMbufPoolShow (IX_OSAL_MBUF_POOL * poolPtr) +{ + IX_OSAL_MBUF *nextBufPtr; + int count = 0; + int lock; + + /* + * check parameters + */ + if (poolPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalBuffPoolShow(): " + "ERROR - Invalid Parameter", 0, 0, 0, 0, 0, 0); + /* + * return IX_FAIL; + */ + return; + } + + lock = ixOsalIrqLock (); + count = poolPtr->freeBufsInPool; + nextBufPtr = poolPtr->nextFreeBuf; + ixOsalIrqUnlock (lock); + + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, + IX_OSAL_LOG_DEV_STDOUT, "=== POOL INFORMATION ===\n", 0, 0, 0, + 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Pool Name: %s\n", + (unsigned int) poolPtr->name, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Pool Allocation Type: %d\n", + (unsigned int) poolPtr->poolAllocType, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Pool Mbuf Mem Usage (bytes): %d\n", + (unsigned int) poolPtr->mbufMemSize, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Pool Data Mem Usage (bytes): %d\n", + (unsigned int) poolPtr->dataMemSize, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Mbuf Data Capacity (bytes): %d\n", + (unsigned int) poolPtr->bufDataSize, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Total Mbufs in Pool: %d\n", + (unsigned int) poolPtr->totalBufsInPool, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Available Mbufs: %d\n", (unsigned int) count, 0, + 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Next Available Mbuf: %p\n", (unsigned int) nextBufPtr, + 0, 0, 0, 0, 0); + + if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC) + { + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, + IX_OSAL_LOG_DEV_STDOUT, + "Mbuf Mem Area Start address: %p\n", + (unsigned int) poolPtr->mbufMemPtr, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, + "Data Mem Area Start address: %p\n", + (unsigned int) poolPtr->dataMemPtr, 0, 0, 0, 0, 0); + } +} + +PUBLIC void +ixOsalMbufDataPtrReset (IX_OSAL_MBUF * bufPtr) +{ + IX_OSAL_MBUF_POOL *poolPtr; + UINT8 *poolDataPtr; + + if (bufPtr == NULL) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, + "ixOsalBuffPoolBufDataPtrReset" + ": ERROR - Invalid Parameter\n", 0, 0, 0, 0, 0, 0); + return; + } + + poolPtr = (IX_OSAL_MBUF_POOL *) IX_OSAL_MBUF_NET_POOL (bufPtr); + poolDataPtr = poolPtr->dataMemPtr; + + if (poolPtr->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC) + { + if (IX_OSAL_MBUF_GET_SYS_SIGNATURE(bufPtr) != IX_OSAL_MBUF_SYS_SIGNATURE) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, + "ixOsalBuffPoolBufDataPtrReset" + ": invalid mbuf, cannot reset mData pointer\n", 0, 0, + 0, 0, 0, 0); + return; + } + IX_OSAL_MBUF_MDATA (bufPtr) = (UINT8*)IX_OSAL_MBUF_ALLOCATED_BUFF_DATA (bufPtr); + } + else + { + if (poolDataPtr) + { + unsigned int bufSize = poolPtr->bufDataSize; + unsigned int bufDataAddr = + (unsigned int) IX_OSAL_MBUF_MDATA (bufPtr); + unsigned int poolDataAddr = (unsigned int) poolDataPtr; + + /* + * the pointer is still pointing somewhere in the mbuf payload. + * This operation moves the pointer to the beginning of the + * mbuf payload + */ + bufDataAddr = ((bufDataAddr - poolDataAddr) / bufSize) * bufSize; + IX_OSAL_MBUF_MDATA (bufPtr) = &poolDataPtr[bufDataAddr]; + } + else + { + ixOsalLog (IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, + "ixOsalBuffPoolBufDataPtrReset" + ": cannot be used if user supplied NULL pointer for pool data area " + "when pool was created\n", 0, 0, 0, 0, 0, 0); + return; + } + } + +} + +/* + * Function definition: ixOsalBuffPoolUninit + */ +PUBLIC IX_STATUS +ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool) +{ + if (!pool) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, + "ixOsalBuffPoolUninit: NULL ptr \n", 0, 0, 0, 0, 0, 0); + return IX_FAIL; + } + + if (pool->freeBufsInPool != pool->totalBufsInPool) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, + "ixOsalBuffPoolUninit: need to return all ptrs to the pool first! \n", + 0, 0, 0, 0, 0, 0); + return IX_FAIL; + } + + if (pool->poolAllocType == IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC) + { +#ifdef IX_OSAL_BUFFER_ALLOC_SEPARATELY + UINT32 i; + IX_OSAL_MBUF* pBuf; + + pBuf = pool->nextFreeBuf; + /* Freed the Buffer one by one till all the Memory is freed*/ + for (i= pool->freeBufsInPool; i >0 && pBuf!=NULL ;i--){ + IX_OSAL_MBUF* pBufTemp; + pBufTemp = IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(pBuf); + /* Freed MBUF Data Memory area*/ + IX_OSAL_CACHE_DMA_FREE( (void *) (IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(pBuf)) ); + /* Freed MBUF Struct Memory area*/ + IX_OSAL_CACHE_DMA_FREE(pBuf); + pBuf = pBufTemp; + } + +#else + IX_OSAL_CACHE_DMA_FREE (pool->mbufMemPtr); + IX_OSAL_CACHE_DMA_FREE (pool->dataMemPtr); +#endif + } + + ixOsalBuffFreePools[pool->poolIdx / IX_OSAL_BUFF_FREE_BITS] &= + ~(1 << (pool->poolIdx % IX_OSAL_BUFF_FREE_BITS)); + ixOsalBuffPoolsInUse--; + return IX_SUCCESS; +} + +/* + * Function definition: ixOsalBuffPoolDataAreaSizeGet + */ +PUBLIC UINT32 +ixOsalBuffPoolDataAreaSizeGet (int count, int size) +{ + UINT32 memorySize; + memorySize = count * IX_OSAL_MBUF_POOL_SIZE_ALIGN (size); + return memorySize; +} + +/* + * Function definition: ixOsalBuffPoolMbufAreaSizeGet + */ +PUBLIC UINT32 +ixOsalBuffPoolMbufAreaSizeGet (int count) +{ + UINT32 memorySize; + memorySize = + count * IX_OSAL_MBUF_POOL_SIZE_ALIGN (sizeof (IX_OSAL_MBUF)); + return memorySize; +} + +/* + * Function definition: ixOsalBuffPoolFreeCountGet + */ +PUBLIC UINT32 ixOsalBuffPoolFreeCountGet(IX_OSAL_MBUF_POOL * poolPtr) + +{ + + return poolPtr->freeBufsInPool; + +} + +#endif /* IX_OSAL_USE_DEFAULT_BUFFER_MGT */ diff --git a/drivers/net/npe/IxOsalIoMem.c b/drivers/net/npe/IxOsalIoMem.c new file mode 100644 index 0000000000..34df92bf79 --- /dev/null +++ b/drivers/net/npe/IxOsalIoMem.c @@ -0,0 +1,332 @@ +/** + * @file IxOsalIoMem.c + * + * @brief OS-independent IO/Mem implementation + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* Access to the global mem map is only allowed in this file */ +#define IxOsalIoMem_C + +#include "IxOsal.h" + +#define SEARCH_PHYSICAL_ADDRESS (1) +#define SEARCH_VIRTUAL_ADDRESS (2) + +/* + * Searches for map using one of the following criteria: + * + * - enough room to include a zone starting with the physical "requestedAddress" of size "size" (for mapping) + * - includes the virtual "requestedAddress" in its virtual address space (already mapped, for unmapping) + * - correct coherency + * + * Returns a pointer to the map or NULL if a suitable map is not found. + */ +PRIVATE IxOsalMemoryMap * +ixOsalMemMapFind (UINT32 requestedAddress, + UINT32 size, UINT32 searchCriteria, UINT32 requestedEndianType) +{ + UINT32 mapIndex; + + UINT32 numMapElements = + sizeof (ixOsalGlobalMemoryMap) / sizeof (IxOsalMemoryMap); + + for (mapIndex = 0; mapIndex < numMapElements; mapIndex++) + { + IxOsalMemoryMap *map = &ixOsalGlobalMemoryMap[mapIndex]; + + if (searchCriteria == SEARCH_PHYSICAL_ADDRESS + && requestedAddress >= map->physicalAddress + && (requestedAddress + size) <= (map->physicalAddress + map->size) + && (map->mapEndianType & requestedEndianType) != 0) + { + return map; + } + else if (searchCriteria == SEARCH_VIRTUAL_ADDRESS + && requestedAddress >= map->virtualAddress + && requestedAddress <= (map->virtualAddress + map->size) + && (map->mapEndianType & requestedEndianType) != 0) + { + return map; + } + else if (searchCriteria == SEARCH_PHYSICAL_ADDRESS) + { + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, + IX_OSAL_LOG_DEV_STDOUT, + "Osal: Checking [phys addr 0x%x:size 0x%x:endianType %d]\n", + map->physicalAddress, map->size, map->mapEndianType, 0, 0, 0); + } + } + + /* + * not found + */ + return NULL; +} + +/* + * This function maps an I/O mapped physical memory zone of the given size + * into a virtual memory zone accessible by the caller and returns a cookie - + * the start address of the virtual memory zone. + * IX_OSAL_MMAP_PHYS_TO_VIRT should NOT therefore be used on the returned + * virtual address. + * The memory zone is to be unmapped using ixOsalMemUnmap once the caller has + * finished using this zone (e.g. on driver unload) using the cookie as + * parameter. + * The IX_OSAL_READ/WRITE_LONG/SHORT macros should be used to read and write + * the mapped memory, adding the necessary offsets to the address cookie. + * + * Note: this function is not to be used directly. Use IX_OSAL_MEM_MAP + * instead. + */ +PUBLIC void * +ixOsalIoMemMap (UINT32 requestedAddress, + UINT32 size, IxOsalMapEndianessType requestedEndianType) +{ + IxOsalMemoryMap *map; + + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, + IX_OSAL_LOG_DEV_STDOUT, + "OSAL: Mapping [addr 0x%x:size 0x%x:endianType %d]\n", + requestedAddress, size, requestedEndianType, 0, 0, 0); + + if (requestedEndianType == IX_OSAL_LE) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalIoMemMap: Please specify component coherency mode to use MEM functions \n", + 0, 0, 0, 0, 0, 0); + return (NULL); + } + map = ixOsalMemMapFind (requestedAddress, + size, SEARCH_PHYSICAL_ADDRESS, requestedEndianType); + if (map != NULL) + { + UINT32 offset = requestedAddress - map->physicalAddress; + + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, + IX_OSAL_LOG_DEV_STDOUT, "OSAL: Found map [", 0, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, + IX_OSAL_LOG_DEV_STDOUT, map->name, 0, 0, 0, 0, 0, 0); + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, + IX_OSAL_LOG_DEV_STDOUT, + ":addr 0x%x: virt 0x%x:size 0x%x:ref %d:endianType %d]\n", + map->physicalAddress, map->virtualAddress, + map->size, map->refCount, map->mapEndianType, 0); + + if (map->type == IX_OSAL_DYNAMIC_MAP && map->virtualAddress == 0) + { + if (map->mapFunction != NULL) + { + map->mapFunction (map); + + if (map->virtualAddress == 0) + { + /* + * failed + */ + ixOsalLog (IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDERR, + "OSAL: Remap failed - [addr 0x%x:size 0x%x:endianType %d]\n", + requestedAddress, size, requestedEndianType, 0, 0, 0); + return NULL; + } + } + else + { + /* + * error, no map function for a dynamic map + */ + ixOsalLog (IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDERR, + "OSAL: No map function for a dynamic map - " + "[addr 0x%x:size 0x%x:endianType %d]\n", + requestedAddress, size, requestedEndianType, 0, 0, 0); + + return NULL; + } + } + + /* + * increment reference count + */ + map->refCount++; + + return (void *) (map->virtualAddress + offset); + } + + /* + * requested address is not described in the global memory map + */ + ixOsalLog (IX_OSAL_LOG_LVL_FATAL, + IX_OSAL_LOG_DEV_STDERR, + "OSAL: No mapping found - [addr 0x%x:size 0x%x:endianType %d]\n", + requestedAddress, size, requestedEndianType, 0, 0, 0); + return NULL; +} + +/* + * This function unmaps a previously mapped I/O memory zone using + * the cookie obtained in the mapping operation. The memory zone in question + * becomes unavailable to the caller once unmapped and the cookie should be + * discarded. + * + * This function cannot fail if the given parameter is correct and does not + * return a value. + * + * Note: this function is not to be used directly. Use IX_OSAL_MEM_UNMAP + * instead. + */ +PUBLIC void +ixOsalIoMemUnmap (UINT32 requestedAddress, UINT32 endianType) +{ + IxOsalMemoryMap *map; + + if (endianType == IX_OSAL_LE) + { + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalIoMemUnmap: Please specify component coherency mode to use MEM functions \n", + 0, 0, 0, 0, 0, 0); + return; + } + + if (requestedAddress == 0) + { + /* + * invalid virtual address + */ + return; + } + + map = + ixOsalMemMapFind (requestedAddress, 0, SEARCH_VIRTUAL_ADDRESS, + endianType); + + if (map != NULL) + { + if (map->refCount > 0) + { + /* + * decrement reference count + */ + map->refCount--; + + if (map->refCount == 0) + { + /* + * no longer used, deallocate + */ + if (map->type == IX_OSAL_DYNAMIC_MAP + && map->unmapFunction != NULL) + { + map->unmapFunction (map); + } + } + } + } + else + { + ixOsalLog (IX_OSAL_LOG_LVL_WARNING, + IX_OSAL_LOG_DEV_STDERR, + "OSAL: ixOsServMemUnmap didn't find the requested map " + "[virt addr 0x%x: endianType %d], ignoring call\n", + requestedAddress, endianType, 0, 0, 0, 0); + } +} + +/* + * This function Converts a virtual address into a physical + * address, including the dynamically mapped memory. + * + * Parameters virtAddr - virtual address to convert + * Return value: corresponding physical address, or NULL + * if there is no physical address addressable + * by the given virtual address + * OS: VxWorks, Linux, WinCE, QNX, eCos + * Reentrant: Yes + * IRQ safe: Yes + */ +PUBLIC UINT32 +ixOsalIoMemVirtToPhys (UINT32 virtualAddress, UINT32 requestedCoherency) +{ + IxOsalMemoryMap *map = + ixOsalMemMapFind (virtualAddress, 0, SEARCH_VIRTUAL_ADDRESS, + requestedCoherency); + + if (map != NULL) + { + return map->physicalAddress + virtualAddress - map->virtualAddress; + } + else + { + return (UINT32) IX_OSAL_MMU_VIRT_TO_PHYS (virtualAddress); + } +} + +/* + * This function Converts a virtual address into a physical + * address, including the dynamically mapped memory. + * + * Parameters virtAddr - virtual address to convert + * Return value: corresponding physical address, or NULL + * if there is no physical address addressable + * by the given virtual address + * OS: VxWorks, Linux, WinCE, QNX, eCos + * Reentrant: Yes + * IRQ safe: Yes + */ +PUBLIC UINT32 +ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 requestedCoherency) +{ + IxOsalMemoryMap *map = + ixOsalMemMapFind (physicalAddress, 0, SEARCH_PHYSICAL_ADDRESS, + requestedCoherency); + + if (map != NULL) + { + return map->virtualAddress + physicalAddress - map->physicalAddress; + } + else + { + return (UINT32) IX_OSAL_MMU_PHYS_TO_VIRT (physicalAddress); + } +} diff --git a/drivers/net/npe/IxOsalOsCacheMMU.c b/drivers/net/npe/IxOsalOsCacheMMU.c new file mode 100644 index 0000000000..3db1a70da9 --- /dev/null +++ b/drivers/net/npe/IxOsalOsCacheMMU.c @@ -0,0 +1,67 @@ +/** + * @file IxOsalOsCacheMMU.c (linux) + * + * @brief Cache MemAlloc and MemFree. + * + * + * @par + * IXP400 SW Release version 1.5 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" + +#include <malloc.h> + +/* + * Allocate on a cache line boundary (null pointers are + * not affected by this operation). This operation is NOT cache safe. + */ +void * +ixOsalCacheDmaMalloc (UINT32 n) +{ + return malloc(n); +} + +/* + * + */ +void +ixOsalCacheDmaFree (void *ptr) +{ + free(ptr); +} diff --git a/drivers/net/npe/IxOsalOsMsgQ.c b/drivers/net/npe/IxOsalOsMsgQ.c new file mode 100644 index 0000000000..45a5c68b16 --- /dev/null +++ b/drivers/net/npe/IxOsalOsMsgQ.c @@ -0,0 +1,79 @@ +/** + * @file IxOsalOsMsgQ.c (eCos) + * + * @brief OS-specific Message Queue implementation. + * + * + * @par + * IXP400 SW Release version 1.5 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" + +/******************************* + * Public functions + *******************************/ +PUBLIC IX_STATUS +ixOsalMessageQueueCreate (IxOsalMessageQueue * queue, + UINT32 msgCount, UINT32 msgLen) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalMessageQueueDelete (IxOsalMessageQueue * queue) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalMessageQueueSend (IxOsalMessageQueue * queue, UINT8 * message) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalMessageQueueReceive (IxOsalMessageQueue * queue, UINT8 * message) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + diff --git a/drivers/net/npe/IxOsalOsSemaphore.c b/drivers/net/npe/IxOsalOsSemaphore.c new file mode 100644 index 0000000000..443aefd4fc --- /dev/null +++ b/drivers/net/npe/IxOsalOsSemaphore.c @@ -0,0 +1,233 @@ +/** + * @file IxOsalOsSemaphore.c (eCos) + * + * @brief Implementation for semaphore and mutex. + * + * + * @par + * IXP400 SW Release version 1.5 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" +#include "IxNpeMhReceive_p.h" + +/* Define a large number */ +#define IX_OSAL_MAX_LONG (0x7FFFFFFF) + +/* Max timeout in MS, used to guard against possible overflow */ +#define IX_OSAL_MAX_TIMEOUT_MS (IX_OSAL_MAX_LONG/HZ) + + +PUBLIC IX_STATUS +ixOsalSemaphoreInit (IxOsalSemaphore * sid, UINT32 start_value) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_SUCCESS; +} + +/** + * DESCRIPTION: If the semaphore is 'empty', the calling thread is blocked. + * If the semaphore is 'full', it is taken and control is returned + * to the caller. If the time indicated in 'timeout' is reached, + * the thread will unblock and return an error indication. If the + * timeout is set to 'IX_OSAL_WAIT_NONE', the thread will never block; + * if it is set to 'IX_OSAL_WAIT_FOREVER', the thread will block until + * the semaphore is available. + * + * + */ + + +PUBLIC IX_STATUS +ixOsalSemaphoreWait (IxOsalOsSemaphore * sid, INT32 timeout) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_SUCCESS; +} + +/* + * Attempt to get semaphore, return immediately, + * no error info because users expect some failures + * when using this API. + */ +PUBLIC IX_STATUS +ixOsalSemaphoreTryWait (IxOsalSemaphore * sid) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + +/** + * + * DESCRIPTION: This function causes the next available thread in the pend queue + * to be unblocked. If no thread is pending on this semaphore, the + * semaphore becomes 'full'. + */ +PUBLIC IX_STATUS +ixOsalSemaphorePost (IxOsalSemaphore * sid) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixOsalSemaphoreGetValue (IxOsalSemaphore * sid, UINT32 * value) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalSemaphoreDestroy (IxOsalSemaphore * sid) +{ + diag_printf("%s called\n", __FUNCTION__); + return IX_FAIL; +} + +/**************************** + * Mutex + ****************************/ + +static void drv_mutex_init(IxOsalMutex *mutex) +{ + *mutex = 0; +} + +static void drv_mutex_destroy(IxOsalMutex *mutex) +{ + *mutex = -1; +} + +static int drv_mutex_trylock(IxOsalMutex *mutex) +{ + int result = TRUE; + + if (*mutex == 1) + result = FALSE; + + return result; +} + +static void drv_mutex_unlock(IxOsalMutex *mutex) +{ + if (*mutex == 1) + printf("Trying to unlock unlocked mutex!"); + + *mutex = 0; +} + +PUBLIC IX_STATUS +ixOsalMutexInit (IxOsalMutex * mutex) +{ + drv_mutex_init(mutex); + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixOsalMutexLock (IxOsalMutex * mutex, INT32 timeout) +{ + int tries; + + if (timeout == IX_OSAL_WAIT_NONE) { + if (drv_mutex_trylock(mutex)) + return IX_SUCCESS; + else + return IX_FAIL; + } + + tries = (timeout * 1000) / 50; + while (1) { + if (drv_mutex_trylock(mutex)) + return IX_SUCCESS; + if (timeout != IX_OSAL_WAIT_FOREVER && tries-- <= 0) + break; + udelay(50); + } + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalMutexUnlock (IxOsalMutex * mutex) +{ + drv_mutex_unlock(mutex); + return IX_SUCCESS; +} + +/* + * Attempt to get mutex, return immediately, + * no error info because users expect some failures + * when using this API. + */ +PUBLIC IX_STATUS +ixOsalMutexTryLock (IxOsalMutex * mutex) +{ + if (drv_mutex_trylock(mutex)) + return IX_SUCCESS; + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalMutexDestroy (IxOsalMutex * mutex) +{ + drv_mutex_destroy(mutex); + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixOsalFastMutexInit (IxOsalFastMutex * mutex) +{ + return ixOsalMutexInit(mutex); +} + +PUBLIC IX_STATUS ixOsalFastMutexTryLock(IxOsalFastMutex *mutex) +{ + return ixOsalMutexTryLock(mutex); +} + + +PUBLIC IX_STATUS +ixOsalFastMutexUnlock (IxOsalFastMutex * mutex) +{ + return ixOsalMutexUnlock(mutex); +} + +PUBLIC IX_STATUS +ixOsalFastMutexDestroy (IxOsalFastMutex * mutex) +{ + return ixOsalMutexDestroy(mutex); +} diff --git a/drivers/net/npe/IxOsalOsServices.c b/drivers/net/npe/IxOsalOsServices.c new file mode 100644 index 0000000000..e18c6c4c1e --- /dev/null +++ b/drivers/net/npe/IxOsalOsServices.c @@ -0,0 +1,251 @@ +/** + * @file IxOsalOsServices.c (linux) + * + * @brief Implementation for Irq, Mem, sleep. + * + * + * @par + * IXP400 SW Release version 1.5 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include <config.h> +#include <common.h> +#include "IxOsal.h" +#include <IxEthAcc.h> +#include <IxEthDB.h> +#include <IxNpeDl.h> +#include <IxQMgr.h> +#include <IxNpeMh.h> + +static char *traceHeaders[] = { + "", + "[fatal] ", + "[error] ", + "[warning] ", + "[message] ", + "[debug1] ", + "[debug2] ", + "[debug3] ", + "[all]" +}; + +/* by default trace all but debug message */ +PRIVATE int ixOsalCurrLogLevel = IX_OSAL_LOG_LVL_MESSAGE; + +/************************************** + * Irq services + *************************************/ + +PUBLIC IX_STATUS +ixOsalIrqBind (UINT32 vector, IxOsalVoidFnVoidPtr routine, void *parameter) +{ + return IX_FAIL; +} + +PUBLIC IX_STATUS +ixOsalIrqUnbind (UINT32 vector) +{ + return IX_FAIL; +} + +PUBLIC UINT32 +ixOsalIrqLock () +{ + return 0; +} + +/* Enable interrupts and task scheduling, + * input parameter: irqEnable status returned + * by ixOsalIrqLock(). + */ +PUBLIC void +ixOsalIrqUnlock (UINT32 lockKey) +{ +} + +PUBLIC UINT32 +ixOsalIrqLevelSet (UINT32 level) +{ + return IX_FAIL; +} + +PUBLIC void +ixOsalIrqEnable (UINT32 irqLevel) +{ +} + +PUBLIC void +ixOsalIrqDisable (UINT32 irqLevel) +{ +} + +/********************* + * Log function + *********************/ + +INT32 +ixOsalLog (IxOsalLogLevel level, + IxOsalLogDevice device, + char *format, int arg1, int arg2, int arg3, int arg4, int arg5, int arg6) +{ + /* + * Return -1 for custom display devices + */ + if ((device != IX_OSAL_LOG_DEV_STDOUT) + && (device != IX_OSAL_LOG_DEV_STDERR)) + { + debug("ixOsalLog: only IX_OSAL_LOG_DEV_STDOUT and IX_OSAL_LOG_DEV_STDERR are supported \n"); + return (IX_OSAL_LOG_ERROR); + } + + if (level <= ixOsalCurrLogLevel && level != IX_OSAL_LOG_LVL_NONE) + { +#if 0 /* sr: U-Boots printf or debug doesn't return a length */ + int headerByteCount = (level == IX_OSAL_LOG_LVL_USER) ? 0 : diag_printf(traceHeaders[level - 1]); + + return headerByteCount + diag_printf (format, arg1, arg2, arg3, arg4, arg5, arg6); +#else + int headerByteCount = (level == IX_OSAL_LOG_LVL_USER) ? 0 : strlen(traceHeaders[level - 1]); + + return headerByteCount + strlen(format); +#endif + } + else + { + /* + * Return error + */ + return (IX_OSAL_LOG_ERROR); + } +} + +PUBLIC UINT32 +ixOsalLogLevelSet (UINT32 level) +{ + UINT32 oldLevel; + + /* + * Check value first + */ + if ((level < IX_OSAL_LOG_LVL_NONE) || (level > IX_OSAL_LOG_LVL_ALL)) + { + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, + IX_OSAL_LOG_DEV_STDOUT, + "ixOsalLogLevelSet: Log Level is between %d and%d \n", + IX_OSAL_LOG_LVL_NONE, IX_OSAL_LOG_LVL_ALL, 0, 0, 0, 0); + return IX_OSAL_LOG_LVL_NONE; + } + oldLevel = ixOsalCurrLogLevel; + + ixOsalCurrLogLevel = level; + + return oldLevel; +} + +/************************************** + * Task services + *************************************/ + +PUBLIC void +ixOsalBusySleep (UINT32 microseconds) +{ + udelay(microseconds); +} + +PUBLIC void +ixOsalSleep (UINT32 milliseconds) +{ + if (milliseconds != 0) { +#if 1 + /* + * sr: We poll while we wait because interrupts are off in U-Boot + * and CSR expects messages, etc to be dispatched while sleeping. + */ + int i; + IxQMgrDispatcherFuncPtr qDispatcherFunc; + + ixQMgrDispatcherLoopGet(&qDispatcherFunc); + + while (milliseconds--) { + for (i = 1; i <= 2; i++) + ixNpeMhMessagesReceive(i); + (*qDispatcherFunc)(IX_QMGR_QUELOW_GROUP); + + udelay(1000); + } +#endif + } +} + +/************************************** + * Memory functions + *************************************/ + +void * +ixOsalMemAlloc (UINT32 size) +{ + return (void *)0; +} + +void +ixOsalMemFree (void *ptr) +{ +} + +/* + * Copy count bytes from src to dest , + * returns pointer to the dest mem zone. + */ +void * +ixOsalMemCopy (void *dest, void *src, UINT32 count) +{ + IX_OSAL_ASSERT (dest != NULL); + IX_OSAL_ASSERT (src != NULL); + return (memcpy (dest, src, count)); +} + +/* + * Fills a memory zone with a given constant byte, + * returns pointer to the memory zone. + */ +void * +ixOsalMemSet (void *ptr, UINT8 filler, UINT32 count) +{ + IX_OSAL_ASSERT (ptr != NULL); + return (memset (ptr, filler, count)); +} diff --git a/drivers/net/npe/IxOsalOsThread.c b/drivers/net/npe/IxOsalOsThread.c new file mode 100644 index 0000000000..e6a4967fcd --- /dev/null +++ b/drivers/net/npe/IxOsalOsThread.c @@ -0,0 +1,98 @@ +/** + * @file IxOsalOsThread.c (eCos) + * + * @brief OS-specific thread implementation. + * + * + * @par + * IXP400 SW Release version 1.5 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxOsal.h" + +/* Thread attribute is ignored */ +PUBLIC IX_STATUS +ixOsalThreadCreate (IxOsalThread * ptrTid, + IxOsalThreadAttr * threadAttr, IxOsalVoidFnVoidPtr entryPoint, void *arg) +{ + return IX_SUCCESS; +} + +/* + * Start thread after given its thread handle + */ +PUBLIC IX_STATUS +ixOsalThreadStart (IxOsalThread * tId) +{ + /* Thread already started upon creation */ + return IX_SUCCESS; +} + +/* + * In Linux threadKill does not actually destroy the thread, + * it will stop the signal handling. + */ +PUBLIC IX_STATUS +ixOsalThreadKill (IxOsalThread * tid) +{ + return IX_SUCCESS; +} + +PUBLIC void +ixOsalThreadExit (void) +{ +} + +PUBLIC IX_STATUS +ixOsalThreadPrioritySet (IxOsalOsThread * tid, UINT32 priority) +{ + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixOsalThreadSuspend (IxOsalThread * tId) +{ + return IX_SUCCESS; + +} + +PUBLIC IX_STATUS +ixOsalThreadResume (IxOsalThread * tId) +{ + return IX_SUCCESS; +} diff --git a/drivers/net/npe/IxQMgrAqmIf.c b/drivers/net/npe/IxQMgrAqmIf.c new file mode 100644 index 0000000000..738651322c --- /dev/null +++ b/drivers/net/npe/IxQMgrAqmIf.c @@ -0,0 +1,963 @@ +/* + * @file: IxQMgrAqmIf.c + * + * @author Intel Corporation + * @date 30-Oct-2001 + * + * @brief This component provides a set of functions for + * perfoming I/O on the AQM hardware. + * + * Design Notes: + * These functions are intended to be as fast as possible + * and as a result perform NO PARAMETER CHECKING. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Inlines are compiled as function when this is defined. + * N.B. Must be placed before #include of "IxQMgrAqmIf_p.h + */ +#ifndef IXQMGRAQMIF_P_H +# define IXQMGRAQMIF_C +#else +# error +#endif + +/* + * User defined include files. + */ +#include "IxOsal.h" +#include "IxQMgr.h" +#include "IxQMgrAqmIf_p.h" +#include "IxQMgrLog_p.h" + + +/* + * #defines and macros used in this file. + */ + +/* These defines are the bit offsets of the various fields of + * the queue configuration register + */ +#define IX_QMGR_Q_CONFIG_WRPTR_OFFSET 0x00 +#define IX_QMGR_Q_CONFIG_RDPTR_OFFSET 0x07 +#define IX_QMGR_Q_CONFIG_BADDR_OFFSET 0x0E +#define IX_QMGR_Q_CONFIG_ESIZE_OFFSET 0x16 +#define IX_QMGR_Q_CONFIG_BSIZE_OFFSET 0x18 +#define IX_QMGR_Q_CONFIG_NE_OFFSET 0x1A +#define IX_QMGR_Q_CONFIG_NF_OFFSET 0x1D + +#define IX_QMGR_BASE_ADDR_16_WORD_ALIGN 0x40 +#define IX_QMGR_BASE_ADDR_16_WORD_SHIFT 0x6 + +#define IX_QMGR_NE_NF_CLEAR_MASK 0x03FFFFFF +#define IX_QMGR_NE_MASK 0x7 +#define IX_QMGR_NF_MASK 0x7 +#define IX_QMGR_SIZE_MASK 0x3 +#define IX_QMGR_ENTRY_SIZE_MASK 0x3 +#define IX_QMGR_BADDR_MASK 0x003FC000 +#define IX_QMGR_RDPTR_MASK 0x7F +#define IX_QMGR_WRPTR_MASK 0x7F +#define IX_QMGR_RDWRPTR_MASK 0x00003FFF + +#define IX_QMGR_AQM_ADDRESS_SPACE_SIZE_IN_WORDS 0x1000 + +/* Base address of AQM SRAM */ +#define IX_QMGR_AQM_SRAM_BASE_ADDRESS_OFFSET \ +((IX_QMGR_QUECONFIG_BASE_OFFSET) + (IX_QMGR_QUECONFIG_SIZE)) + +/* Min buffer size used for generating buffer size in QUECONFIG */ +#define IX_QMGR_MIN_BUFFER_SIZE 16 + +/* Reset values of QMgr hardware registers */ +#define IX_QMGR_QUELOWSTAT_RESET_VALUE 0x33333333 +#define IX_QMGR_QUEUOSTAT_RESET_VALUE 0x00000000 +#define IX_QMGR_QUEUPPSTAT0_RESET_VALUE 0xFFFFFFFF +#define IX_QMGR_QUEUPPSTAT1_RESET_VALUE 0x00000000 +#define IX_QMGR_INT0SRCSELREG_RESET_VALUE 0x00000000 +#define IX_QMGR_QUEIEREG_RESET_VALUE 0x00000000 +#define IX_QMGR_QINTREG_RESET_VALUE 0xFFFFFFFF +#define IX_QMGR_QUECONFIG_RESET_VALUE 0x00000000 + +#define IX_QMGR_PHYSICAL_AQM_BASE_ADDRESS IX_OSAL_IXP400_QMGR_PHYS_BASE + +#define IX_QMGR_QUELOWSTAT_BITS_PER_Q (BITS_PER_WORD/IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) + +#define IX_QMGR_QUELOWSTAT_QID_MASK 0x7 +#define IX_QMGR_Q_CONFIG_ADDR_GET(qId)\ + (((qId) * IX_QMGR_NUM_BYTES_PER_WORD) +\ + IX_QMGR_QUECONFIG_BASE_OFFSET) + +#define IX_QMGR_ENTRY1_OFFSET 0 +#define IX_QMGR_ENTRY2_OFFSET 1 +#define IX_QMGR_ENTRY4_OFFSET 3 + +/* + * Variable declarations global to this file. Externs are followed by + * statics. + */ +UINT32 aqmBaseAddress = 0; +/* Store addresses and bit-masks for certain queue access and status registers. + * This is to facilitate inlining of QRead, QWrite and QStatusGet functions + * in IxQMgr,h + */ +extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; +UINT32 * ixQMgrAqmIfQueAccRegAddr[IX_QMGR_MAX_NUM_QUEUES]; +UINT32 ixQMgrAqmIfQueLowStatRegAddr[IX_QMGR_MIN_QUEUPP_QID]; +UINT32 ixQMgrAqmIfQueLowStatBitsOffset[IX_QMGR_MIN_QUEUPP_QID]; +UINT32 ixQMgrAqmIfQueLowStatBitsMask; +UINT32 ixQMgrAqmIfQueUppStat0RegAddr; +UINT32 ixQMgrAqmIfQueUppStat1RegAddr; +UINT32 ixQMgrAqmIfQueUppStat0BitMask[IX_QMGR_MIN_QUEUPP_QID]; +UINT32 ixQMgrAqmIfQueUppStat1BitMask[IX_QMGR_MIN_QUEUPP_QID]; + +/* + * Fast mutexes, one for each queue, used to protect peek & poke functions + */ +IxOsalFastMutex ixQMgrAqmIfPeekPokeFastMutex[IX_QMGR_MAX_NUM_QUEUES]; + +/* + * Function prototypes + */ +PRIVATE unsigned +watermarkToAqmWatermark (IxQMgrWMLevel watermark ); + +PRIVATE unsigned +entrySizeToAqmEntrySize (IxQMgrQEntrySizeInWords entrySize); + +PRIVATE unsigned +bufferSizeToAqmBufferSize (unsigned bufferSizeInWords); + +PRIVATE void +ixQMgrAqmIfRegistersReset (void); + +PRIVATE void +ixQMgrAqmIfEntryAddressGet (unsigned int entryIndex, + UINT32 configRegWord, + unsigned int qEntrySizeInwords, + unsigned int qSizeInWords, + UINT32 **address); +/* + * Function definitions + */ +void +ixQMgrAqmIfInit (void) +{ + UINT32 aqmVirtualAddr; + int i; + + /* The value of aqmBaseAddress depends on the logical address + * assigned by the MMU. + */ + aqmVirtualAddr = + (UINT32) IX_OSAL_MEM_MAP(IX_QMGR_PHYSICAL_AQM_BASE_ADDRESS, + IX_OSAL_IXP400_QMGR_MAP_SIZE); + IX_OSAL_ASSERT (aqmVirtualAddr); + + ixQMgrAqmIfBaseAddressSet (aqmVirtualAddr); + + ixQMgrAqmIfRegistersReset (); + + for (i = 0; i< IX_QMGR_MAX_NUM_QUEUES; i++) + { + ixOsalFastMutexInit(&ixQMgrAqmIfPeekPokeFastMutex[i]); + + /******************************************************************** + * Register addresses and bit masks are calculated and stored here to + * facilitate inlining of QRead, QWrite and QStatusGet functions in + * IxQMgr.h. + * These calculations are normally performed dynamically in inlined + * functions in IxQMgrAqmIf_p.h, and their semantics are reused here. + */ + + /* AQM Queue access reg addresses, per queue */ + ixQMgrAqmIfQueAccRegAddr[i] = + (UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i)); + ixQMgrQInlinedReadWriteInfo[i].qAccRegAddr = + (volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_ACCESS_ADDR_GET(i)); + + + ixQMgrQInlinedReadWriteInfo[i].qConfigRegAddr = + (volatile UINT32 *)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(i)); + + /* AQM Queue lower-group (0-31), only */ + if (i < IX_QMGR_MIN_QUEUPP_QID) + { + /* AQM Q underflow/overflow status register addresses, per queue */ + ixQMgrQInlinedReadWriteInfo[i].qUOStatRegAddr = + (volatile UINT32 *)(aqmBaseAddress + + IX_QMGR_QUEUOSTAT0_OFFSET + + ((i / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD) * + IX_QMGR_NUM_BYTES_PER_WORD)); + + /* AQM Q underflow status bit masks for status register per queue */ + ixQMgrQInlinedReadWriteInfo[i].qUflowStatBitMask = + (IX_QMGR_UNDERFLOW_BIT_OFFSET + 1) << + ((i & (IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD - 1)) * + (BITS_PER_WORD / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD)); + + /* AQM Q overflow status bit masks for status register, per queue */ + ixQMgrQInlinedReadWriteInfo[i].qOflowStatBitMask = + (IX_QMGR_OVERFLOW_BIT_OFFSET + 1) << + ((i & (IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD - 1)) * + (BITS_PER_WORD / IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD)); + + /* AQM Q lower-group (0-31) status register addresses, per queue */ + ixQMgrAqmIfQueLowStatRegAddr[i] = aqmBaseAddress + + IX_QMGR_QUELOWSTAT0_OFFSET + + ((i / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) * + IX_QMGR_NUM_BYTES_PER_WORD); + + /* AQM Q lower-group (0-31) status register bit offset */ + ixQMgrAqmIfQueLowStatBitsOffset[i] = + (i & (IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD - 1)) * + (BITS_PER_WORD / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD); + } + else /* AQM Q upper-group (32-63), only */ + { + /* AQM Q upper-group (32-63) Nearly Empty status reg bit masks */ + ixQMgrAqmIfQueUppStat0BitMask[i - IX_QMGR_MIN_QUEUPP_QID] = + (1 << (i - IX_QMGR_MIN_QUEUPP_QID)); + + /* AQM Q upper-group (32-63) Full status register bit masks */ + ixQMgrAqmIfQueUppStat1BitMask[i - IX_QMGR_MIN_QUEUPP_QID] = + (1 << (i - IX_QMGR_MIN_QUEUPP_QID)); + } + } + + /* AQM Q lower-group (0-31) status register bit mask */ + ixQMgrAqmIfQueLowStatBitsMask = (1 << + (BITS_PER_WORD / + IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD)) - 1; + + /* AQM Q upper-group (32-63) Nearly Empty status register address */ + ixQMgrAqmIfQueUppStat0RegAddr = aqmBaseAddress + IX_QMGR_QUEUPPSTAT0_OFFSET; + + /* AQM Q upper-group (32-63) Full status register address */ + ixQMgrAqmIfQueUppStat1RegAddr = aqmBaseAddress + IX_QMGR_QUEUPPSTAT1_OFFSET; +} + +/* + * Uninitialise the AqmIf module by unmapping memory, etc + */ +void +ixQMgrAqmIfUninit (void) +{ + UINT32 virtAddr; + + ixQMgrAqmIfBaseAddressGet (&virtAddr); + IX_OSAL_MEM_UNMAP (virtAddr); + ixQMgrAqmIfBaseAddressSet (0); +} + +/* + * Set the the logical base address of AQM + */ +void +ixQMgrAqmIfBaseAddressSet (UINT32 address) +{ + aqmBaseAddress = address; +} + +/* + * Get the logical base address of AQM + */ +void +ixQMgrAqmIfBaseAddressGet (UINT32 *address) +{ + *address = aqmBaseAddress; +} + +/* + * Get the logical base address of AQM SRAM + */ +void +ixQMgrAqmIfSramBaseAddressGet (UINT32 *address) +{ + *address = aqmBaseAddress + + IX_QMGR_AQM_SRAM_BASE_ADDRESS_OFFSET; +} + +/* + * This function will write the status bits of a queue + * specified by qId. + */ +void +ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId, + UINT32 registerBaseAddrOffset, + unsigned queuesPerRegWord, + UINT32 value) +{ + volatile UINT32 *registerAddress; + UINT32 registerWord; + UINT32 statusBitsMask; + UINT32 bitsPerQueue; + + bitsPerQueue = BITS_PER_WORD / queuesPerRegWord; + + /* + * Calculate the registerAddress + * multiple queues split accross registers + */ + registerAddress = (UINT32*)(aqmBaseAddress + + registerBaseAddrOffset + + ((qId / queuesPerRegWord) * + IX_QMGR_NUM_BYTES_PER_WORD)); + + /* Read the current data */ + ixQMgrAqmIfWordRead (registerAddress, ®isterWord); + + + if( (registerBaseAddrOffset == IX_QMGR_INT0SRCSELREG0_OFFSET) && + (qId == IX_QMGR_QUEUE_0) ) + { + statusBitsMask = 0x7 ; + + /* Queue 0 at INT0SRCSELREG should not corrupt the value bit-3 */ + value &= 0x7 ; + } + else + { + /* Calculate the mask for the status bits for this queue. */ + statusBitsMask = ((1 << bitsPerQueue) - 1); + statusBitsMask <<= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue); + + /* Mask out bits in value that would overwrite other q data */ + value <<= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue); + value &= statusBitsMask; + } + + /* Mask out bits to write to */ + registerWord &= ~statusBitsMask; + + + /* Set the write bits */ + registerWord |= value; + + /* + * Write the data + */ + ixQMgrAqmIfWordWrite (registerAddress, registerWord); +} + +/* + * This function generates the parameters that can be used to + * check if a Qs status matches the specified source select. + * It calculates which status word to check (statusWordOffset), + * the value to check the status against (checkValue) and the + * mask (mask) to mask out all but the bits to check in the status word. + */ +void +ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId, + IxQMgrSourceId srcSel, + unsigned int *statusWordOffset, + UINT32 *checkValue, + UINT32 *mask) +{ + UINT32 shiftVal; + + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + switch (srcSel) + { + case IX_QMGR_Q_SOURCE_ID_E: + *checkValue = IX_QMGR_Q_STATUS_E_BIT_MASK; + *mask = IX_QMGR_Q_STATUS_E_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_NE: + *checkValue = IX_QMGR_Q_STATUS_NE_BIT_MASK; + *mask = IX_QMGR_Q_STATUS_NE_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_NF: + *checkValue = IX_QMGR_Q_STATUS_NF_BIT_MASK; + *mask = IX_QMGR_Q_STATUS_NF_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_F: + *checkValue = IX_QMGR_Q_STATUS_F_BIT_MASK; + *mask = IX_QMGR_Q_STATUS_F_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_E: + *checkValue = 0; + *mask = IX_QMGR_Q_STATUS_E_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_NE: + *checkValue = 0; + *mask = IX_QMGR_Q_STATUS_NE_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_NF: + *checkValue = 0; + *mask = IX_QMGR_Q_STATUS_NF_BIT_MASK; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_F: + *checkValue = 0; + *mask = IX_QMGR_Q_STATUS_F_BIT_MASK; + break; + default: + /* Should never hit */ + IX_OSAL_ASSERT(0); + break; + } + + /* One nibble of status per queue so need to shift the + * check value and mask out to the correct position. + */ + shiftVal = (qId % IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD) * + IX_QMGR_QUELOWSTAT_BITS_PER_Q; + + /* Calculate the which status word to check from the qId, + * 8 Qs status per word + */ + *statusWordOffset = qId / IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD; + + *checkValue <<= shiftVal; + *mask <<= shiftVal; + } + else + { + /* One status word */ + *statusWordOffset = 0; + /* Single bits per queue and int source bit hardwired NE, + * Qs start at 32. + */ + *mask = 1 << (qId - IX_QMGR_MIN_QUEUPP_QID); + *checkValue = *mask; + } +} + +void +ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId) +{ + volatile UINT32 *registerAddress; + UINT32 registerWord; + UINT32 actualBitOffset; + + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET); + } + else + { + registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET); + } + + actualBitOffset = 1 << (qId % IX_QMGR_MIN_QUEUPP_QID); + + ixQMgrAqmIfWordRead (registerAddress, ®isterWord); + ixQMgrAqmIfWordWrite (registerAddress, (registerWord | actualBitOffset)); +} + +void +ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId) +{ + volatile UINT32 *registerAddress; + UINT32 registerWord; + UINT32 actualBitOffset; + + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET); + } + else + { + registerAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET); + } + + actualBitOffset = 1 << (qId % IX_QMGR_MIN_QUEUPP_QID); + + ixQMgrAqmIfWordRead (registerAddress, ®isterWord); + ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset)); +} + +void +ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId, + IxQMgrQSizeInWords qSizeInWords, + IxQMgrQEntrySizeInWords entrySizeInWords, + UINT32 freeSRAMAddress) +{ + volatile UINT32 *cfgAddress = NULL; + UINT32 qCfg = 0; + UINT32 baseAddress = 0; + unsigned aqmEntrySize = 0; + unsigned aqmBufferSize = 0; + + /* Build config register */ + aqmEntrySize = entrySizeToAqmEntrySize (entrySizeInWords); + qCfg |= (aqmEntrySize&IX_QMGR_ENTRY_SIZE_MASK) << + IX_QMGR_Q_CONFIG_ESIZE_OFFSET; + + aqmBufferSize = bufferSizeToAqmBufferSize (qSizeInWords); + qCfg |= (aqmBufferSize&IX_QMGR_SIZE_MASK) << IX_QMGR_Q_CONFIG_BSIZE_OFFSET; + + /* baseAddress, calculated relative to aqmBaseAddress and start address */ + baseAddress = freeSRAMAddress - + (aqmBaseAddress + IX_QMGR_QUECONFIG_BASE_OFFSET); + + /* Verify base address aligned to a 16 word boundary */ + if ((baseAddress % IX_QMGR_BASE_ADDR_16_WORD_ALIGN) != 0) + { + IX_QMGR_LOG_ERROR0("ixQMgrAqmIfQueCfgWrite () address is not on 16 word boundary\n"); + } + /* Now convert it to a 16 word pointer as required by QUECONFIG register */ + baseAddress >>= IX_QMGR_BASE_ADDR_16_WORD_SHIFT; + + + qCfg |= (baseAddress << IX_QMGR_Q_CONFIG_BADDR_OFFSET); + + + cfgAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); + + + /* NOTE: High and Low watermarks are set to zero */ + ixQMgrAqmIfWordWrite (cfgAddress, qCfg); +} + +void +ixQMgrAqmIfQueCfgRead (IxQMgrQId qId, + unsigned int numEntries, + UINT32 *baseAddress, + unsigned int *ne, + unsigned int *nf, + UINT32 *readPtr, + UINT32 *writePtr) +{ + UINT32 qcfg; + UINT32 *cfgAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); + unsigned int qEntrySizeInwords; + unsigned int qSizeInWords; + UINT32 *readPtr_ = NULL; + + /* Read the queue configuration register */ + ixQMgrAqmIfWordRead (cfgAddress, &qcfg); + + /* Extract the base address */ + *baseAddress = (UINT32)((qcfg & IX_QMGR_BADDR_MASK) >> + (IX_QMGR_Q_CONFIG_BADDR_OFFSET)); + + /* Base address is a 16 word pointer from the start of AQM SRAM. + * Convert to absolute word address. + */ + *baseAddress <<= IX_QMGR_BASE_ADDR_16_WORD_SHIFT; + *baseAddress += (UINT32)IX_QMGR_QUECONFIG_BASE_OFFSET; + + /* + * Extract the watermarks. 0->0 entries, 1->1 entries, 2->2 entries, 3->4 entries...... + * If ne > 0 ==> neInEntries = 2^(ne - 1) + * If ne == 0 ==> neInEntries = 0 + * The same applies. + */ + *ne = ((qcfg) >> (IX_QMGR_Q_CONFIG_NE_OFFSET)) & IX_QMGR_NE_MASK; + *nf = ((qcfg) >> (IX_QMGR_Q_CONFIG_NF_OFFSET)) & IX_QMGR_NF_MASK; + + if (0 != *ne) + { + *ne = 1 << (*ne - 1); + } + if (0 != *nf) + { + *nf = 1 << (*nf - 1); + } + + /* Get the queue entry size in words */ + qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId); + + /* Get the queue size in words */ + qSizeInWords = ixQMgrQSizeInWordsGet (qId); + + ixQMgrAqmIfEntryAddressGet (0/* Entry 0. i.e the readPtr*/, + qcfg, + qEntrySizeInwords, + qSizeInWords, + &readPtr_); + *readPtr = (UINT32)readPtr_; + *readPtr -= (UINT32)aqmBaseAddress;/* Offset, not absolute address */ + + *writePtr = (qcfg >> IX_QMGR_Q_CONFIG_WRPTR_OFFSET) & IX_QMGR_WRPTR_MASK; + *writePtr = *baseAddress + (*writePtr * (IX_QMGR_NUM_BYTES_PER_WORD)); + return; +} + +unsigned +ixQMgrAqmIfLog2 (unsigned number) +{ + unsigned count = 0; + + /* + * N.B. this function will return 0 + * for ixQMgrAqmIfLog2 (0) + */ + while (number/2) + { + number /=2; + count++; + } + + return count; +} + +void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void) +{ + + volatile UINT32 *registerAddress; + UINT32 registerWord; + + /* + * Calculate the registerAddress + * multiple queues split accross registers + */ + registerAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_INT0SRCSELREG0_OFFSET); + + /* Read the current data */ + ixQMgrAqmIfWordRead (registerAddress, ®isterWord); + + /* Set the write bits */ + registerWord |= (1<<IX_QMGR_INT0SRCSELREG0_BIT3) ; + + /* + * Write the data + */ + ixQMgrAqmIfWordWrite (registerAddress, registerWord); +} + + +void +ixQMgrAqmIfIntSrcSelWrite (IxQMgrQId qId, + IxQMgrSourceId sourceId) +{ + ixQMgrAqmIfQRegisterBitsWrite (qId, + IX_QMGR_INT0SRCSELREG0_OFFSET, + IX_QMGR_INTSRC_NUM_QUE_PER_WORD, + sourceId); +} + + + +void +ixQMgrAqmIfWatermarkSet (IxQMgrQId qId, + unsigned ne, + unsigned nf) +{ + volatile UINT32 *address = 0; + UINT32 value = 0; + unsigned aqmNeWatermark = 0; + unsigned aqmNfWatermark = 0; + + address = (UINT32*)(aqmBaseAddress + + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); + + aqmNeWatermark = watermarkToAqmWatermark (ne); + aqmNfWatermark = watermarkToAqmWatermark (nf); + + /* Read the current watermarks */ + ixQMgrAqmIfWordRead (address, &value); + + /* Clear out the old watermarks */ + value &= IX_QMGR_NE_NF_CLEAR_MASK; + + /* Generate the value to write */ + value |= (aqmNeWatermark << IX_QMGR_Q_CONFIG_NE_OFFSET) | + (aqmNfWatermark << IX_QMGR_Q_CONFIG_NF_OFFSET); + + ixQMgrAqmIfWordWrite (address, value); + +} + +PRIVATE void +ixQMgrAqmIfEntryAddressGet (unsigned int entryIndex, + UINT32 configRegWord, + unsigned int qEntrySizeInwords, + unsigned int qSizeInWords, + UINT32 **address) +{ + UINT32 readPtr; + UINT32 baseAddress; + UINT32 *topOfAqmSram; + + topOfAqmSram = ((UINT32 *)aqmBaseAddress + IX_QMGR_AQM_ADDRESS_SPACE_SIZE_IN_WORDS); + + /* Extract the base address */ + baseAddress = (UINT32)((configRegWord & IX_QMGR_BADDR_MASK) >> + (IX_QMGR_Q_CONFIG_BADDR_OFFSET)); + + /* Base address is a 16 word pointer from the start of AQM SRAM. + * Convert to absolute word address. + */ + baseAddress <<= IX_QMGR_BASE_ADDR_16_WORD_SHIFT; + baseAddress += ((UINT32)aqmBaseAddress + (UINT32)IX_QMGR_QUECONFIG_BASE_OFFSET); + + /* Extract the read pointer. Read pointer is a word pointer */ + readPtr = (UINT32)((configRegWord >> + IX_QMGR_Q_CONFIG_RDPTR_OFFSET)&IX_QMGR_RDPTR_MASK); + + /* Read/Write pointers(word pointers) are offsets from the queue buffer space base address. + * Calculate the absolute read pointer address. NOTE: Queues are circular buffers. + */ + readPtr = (readPtr + (entryIndex * qEntrySizeInwords)) & (qSizeInWords - 1); /* Mask by queue size */ + *address = (UINT32 *)(baseAddress + (readPtr * (IX_QMGR_NUM_BYTES_PER_WORD))); + + switch (qEntrySizeInwords) + { + case IX_QMGR_Q_ENTRY_SIZE1: + IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY1_OFFSET) < topOfAqmSram); + break; + case IX_QMGR_Q_ENTRY_SIZE2: + IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY2_OFFSET) < topOfAqmSram); + break; + case IX_QMGR_Q_ENTRY_SIZE4: + IX_OSAL_ASSERT((*address + IX_QMGR_ENTRY4_OFFSET) < topOfAqmSram); + break; + default: + IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfEntryAddressGet"); + break; + } + +} + +IX_STATUS +ixQMgrAqmIfQPeek (IxQMgrQId qId, + unsigned int entryIndex, + unsigned int *entry) +{ + UINT32 *cfgRegAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); + UINT32 *entryAddress = NULL; + UINT32 configRegWordOnEntry; + UINT32 configRegWordOnExit; + unsigned int qEntrySizeInwords; + unsigned int qSizeInWords; + + /* Get the queue entry size in words */ + qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId); + + /* Get the queue size in words */ + qSizeInWords = ixQMgrQSizeInWordsGet (qId); + + /* Read the config register */ + ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnEntry); + + /* Get the entry address */ + ixQMgrAqmIfEntryAddressGet (entryIndex, + configRegWordOnEntry, + qEntrySizeInwords, + qSizeInWords, + &entryAddress); + + /* Get the lock or return busy */ + if (IX_SUCCESS != ixOsalFastMutexTryLock(&ixQMgrAqmIfPeekPokeFastMutex[qId])) + { + return IX_FAIL; + } + + while(qEntrySizeInwords--) + { + ixQMgrAqmIfWordRead (entryAddress++, entry++); + } + + /* Release the lock */ + ixOsalFastMutexUnlock(&ixQMgrAqmIfPeekPokeFastMutex[qId]); + + /* Read the config register */ + ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnExit); + + /* Check that the read and write pointers have not changed */ + if (configRegWordOnEntry != configRegWordOnExit) + { + return IX_FAIL; + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrAqmIfQPoke (IxQMgrQId qId, + unsigned entryIndex, + unsigned int *entry) +{ + UINT32 *cfgRegAddress = (UINT32*)(aqmBaseAddress + IX_QMGR_Q_CONFIG_ADDR_GET(qId)); + UINT32 *entryAddress = NULL; + UINT32 configRegWordOnEntry; + UINT32 configRegWordOnExit; + unsigned int qEntrySizeInwords; + unsigned int qSizeInWords; + + /* Get the queue entry size in words */ + qEntrySizeInwords = ixQMgrQEntrySizeInWordsGet (qId); + + /* Get the queue size in words */ + qSizeInWords = ixQMgrQSizeInWordsGet (qId); + + /* Read the config register */ + ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnEntry); + + /* Get the entry address */ + ixQMgrAqmIfEntryAddressGet (entryIndex, + configRegWordOnEntry, + qEntrySizeInwords, + qSizeInWords, + &entryAddress); + + /* Get the lock or return busy */ + if (IX_SUCCESS != ixOsalFastMutexTryLock(&ixQMgrAqmIfPeekPokeFastMutex[qId])) + { + return IX_FAIL; + } + + /* Else read the entry directly from SRAM. This will not move the read pointer */ + while(qEntrySizeInwords--) + { + ixQMgrAqmIfWordWrite (entryAddress++, *entry++); + } + + /* Release the lock */ + ixOsalFastMutexUnlock(&ixQMgrAqmIfPeekPokeFastMutex[qId]); + + /* Read the config register */ + ixQMgrAqmIfWordRead (cfgRegAddress, &configRegWordOnExit); + + /* Check that the read and write pointers have not changed */ + if (configRegWordOnEntry != configRegWordOnExit) + { + return IX_FAIL; + } + + return IX_SUCCESS; +} + +PRIVATE unsigned +watermarkToAqmWatermark (IxQMgrWMLevel watermark ) +{ + unsigned aqmWatermark = 0; + + /* + * Watermarks 0("000"),1("001"),2("010"),4("011"), + * 8("100"),16("101"),32("110"),64("111") + */ + aqmWatermark = ixQMgrAqmIfLog2 (watermark * 2); + + return aqmWatermark; +} + +PRIVATE unsigned +entrySizeToAqmEntrySize (IxQMgrQEntrySizeInWords entrySize) +{ + /* entrySize 1("00"),2("01"),4("10") */ + return (ixQMgrAqmIfLog2 (entrySize)); +} + +PRIVATE unsigned +bufferSizeToAqmBufferSize (unsigned bufferSizeInWords) +{ + /* bufferSize 16("00"),32("01),64("10"),128("11") */ + return (ixQMgrAqmIfLog2 (bufferSizeInWords / IX_QMGR_MIN_BUFFER_SIZE)); +} + +/* + * Reset AQM registers to default values. + */ +PRIVATE void +ixQMgrAqmIfRegistersReset (void) +{ + volatile UINT32 *qConfigWordAddress = NULL; + unsigned int i; + + /* + * Need to initialize AQM hardware registers to an initial + * value as init may have been called as a result of a soft + * reset. i.e. soft reset does not reset hardware registers. + */ + + /* Reset queues 0..31 status registers 0..3 */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT0_OFFSET), + IX_QMGR_QUELOWSTAT_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT1_OFFSET), + IX_QMGR_QUELOWSTAT_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT2_OFFSET), + IX_QMGR_QUELOWSTAT_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUELOWSTAT3_OFFSET), + IX_QMGR_QUELOWSTAT_RESET_VALUE); + + /* Reset underflow/overflow status registers 0..1 */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUOSTAT0_OFFSET), + IX_QMGR_QUEUOSTAT_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUOSTAT1_OFFSET), + IX_QMGR_QUEUOSTAT_RESET_VALUE); + + /* Reset queues 32..63 nearly empty status registers */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUPPSTAT0_OFFSET), + IX_QMGR_QUEUPPSTAT0_RESET_VALUE); + + /* Reset queues 32..63 full status registers */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEUPPSTAT1_OFFSET), + IX_QMGR_QUEUPPSTAT1_RESET_VALUE); + + /* Reset int0 status flag source select registers 0..3 */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG0_OFFSET), + IX_QMGR_INT0SRCSELREG_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG1_OFFSET), + IX_QMGR_INT0SRCSELREG_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG2_OFFSET), + IX_QMGR_INT0SRCSELREG_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_INT0SRCSELREG3_OFFSET), + IX_QMGR_INT0SRCSELREG_RESET_VALUE); + + /* Reset queue interrupt enable register 0..1 */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEIEREG0_OFFSET), + IX_QMGR_QUEIEREG_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QUEIEREG1_OFFSET), + IX_QMGR_QUEIEREG_RESET_VALUE); + + /* Reset queue interrupt register 0..1 */ + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QINTREG0_OFFSET), + IX_QMGR_QINTREG_RESET_VALUE); + ixQMgrAqmIfWordWrite((UINT32 *)(aqmBaseAddress + IX_QMGR_QINTREG1_OFFSET), + IX_QMGR_QINTREG_RESET_VALUE); + + /* Reset queue configuration words 0..63 */ + qConfigWordAddress = (UINT32 *)(aqmBaseAddress + IX_QMGR_QUECONFIG_BASE_OFFSET); + for (i = 0; i < (IX_QMGR_QUECONFIG_SIZE / sizeof(UINT32)); i++) + { + ixQMgrAqmIfWordWrite(qConfigWordAddress, + IX_QMGR_QUECONFIG_RESET_VALUE); + /* Next word */ + qConfigWordAddress++; + } +} + diff --git a/drivers/net/npe/IxQMgrDispatcher.c b/drivers/net/npe/IxQMgrDispatcher.c new file mode 100644 index 0000000000..9cb143998d --- /dev/null +++ b/drivers/net/npe/IxQMgrDispatcher.c @@ -0,0 +1,1344 @@ +/** + * @file IxQMgrDispatcher.c + * + * @author Intel Corporation + * @date 20-Dec-2001 + * + * @brief This file contains the implementation of the Dispatcher sub component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * User defined include files. + */ +#include "IxQMgr.h" +#include "IxQMgrAqmIf_p.h" +#include "IxQMgrQCfg_p.h" +#include "IxQMgrDispatcher_p.h" +#include "IxQMgrLog_p.h" +#include "IxQMgrDefines_p.h" +#include "IxFeatureCtrl.h" +#include "IxOsal.h" + + + +/* + * #defines and macros used in this file. + */ + + +/* + * This constant is used to indicate the number of priority levels supported + */ +#define IX_QMGR_NUM_PRIORITY_LEVELS 3 + +/* + * This constant is used to set the size of the array of status words + */ +#define MAX_Q_STATUS_WORDS 4 + +/* + * This macro is used to check if a given priority is valid + */ +#define IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority) \ +(((priority) >= IX_QMGR_Q_PRIORITY_0) && ((priority) <= IX_QMGR_Q_PRIORITY_2)) + +/* + * This macto is used to check that a given interrupt source is valid + */ +#define IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel) \ +(((srcSel) >= IX_QMGR_Q_SOURCE_ID_E) && ((srcSel) <= IX_QMGR_Q_SOURCE_ID_NOT_F)) + +/* + * Number of times a dummy callback is called before logging a trace + * message + */ +#define LOG_THROTTLE_COUNT 1000000 + +/* Priority tables limits */ +#define IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX (0) +#define IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX (16) +#define IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX (31) +#define IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX (32) +#define IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX (48) +#define IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX (63) + +/* + * This macro is used to check if a given callback type is valid + */ +#define IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type) \ + (((type) >= IX_QMGR_TYPE_REALTIME_OTHER) && \ + ((type) <= IX_QMGR_TYPE_REALTIME_SPORADIC)) + +/* + * define max index in lower queue to use in loops + */ +#define IX_QMGR_MAX_LOW_QUE_TABLE_INDEX (31) + +/* + * Typedefs whose scope is limited to this file. + */ + +/* + * Information on a queue needed by the Dispatcher + */ +typedef struct +{ + IxQMgrCallback callback; /* Notification callback */ + IxQMgrCallbackId callbackId; /* Notification callback identifier */ + unsigned dummyCallbackCount; /* Number of times runs of dummy callback */ + IxQMgrPriority priority; /* Dispatch priority */ + unsigned int statusWordOffset; /* Offset to the status word to check */ + UINT32 statusMask; /* Status mask */ + UINT32 statusCheckValue; /* Status check value */ + UINT32 intRegCheckMask; /* Interrupt register check mask */ +} IxQMgrQInfo; + +/* + * Variable declarations global to this file. Externs are followed by + * statics. + */ + +/* + * Flag to keep record of what dispatcher set in featureCtrl when ixQMgrInit() + * is called. This is needed because it is possible that a client might + * change whether the live lock prevention dispatcher is used between + * calls to ixQMgrInit() and ixQMgrDispatcherLoopGet(). + */ +PRIVATE IX_STATUS ixQMgrOrigB0Dispatcher = IX_FEATURE_CTRL_COMPONENT_ENABLED; + +/* + * keep record of Q types - not in IxQMgrQInfo for performance as + * it is only used with ixQMgrDispatcherLoopRunB0LLP() + */ +PRIVATE IxQMgrType ixQMgrQTypes[IX_QMGR_MAX_NUM_QUEUES]; + +/* + * This array contains a list of queue identifiers ordered by priority. The table + * is split logically between queue identifiers 0-31 and 32-63. + */ +static IxQMgrQId priorityTable[IX_QMGR_MAX_NUM_QUEUES]; + +/* + * This flag indicates to the dispatcher that the priority table needs to be rebuilt. + */ +static BOOL rebuildTable = FALSE; + +/* Dispatcher statistics */ +static IxQMgrDispatcherStats dispatcherStats; + +/* Table of queue information */ +static IxQMgrQInfo dispatchQInfo[IX_QMGR_MAX_NUM_QUEUES]; + +/* Masks use to identify the first queues in the priority tables +* when comparing with the interrupt register +*/ +static unsigned int lowPriorityTableFirstHalfMask; +static unsigned int uppPriorityTableFirstHalfMask; + +/* + * Static function prototypes + */ + +/* + * This function is the default callback for all queues + */ +PRIVATE void +dummyCallback (IxQMgrQId qId, + IxQMgrCallbackId cbId); + +PRIVATE void +ixQMgrDispatcherReBuildPriorityTable (void); + +/* + * Function definitions. + */ +void +ixQMgrDispatcherInit (void) +{ + int i; + IxFeatureCtrlProductId productId = 0; + IxFeatureCtrlDeviceId deviceId = 0; + BOOL stickyIntSilicon = TRUE; + + /* Set default priorities */ + for (i=0; i< IX_QMGR_MAX_NUM_QUEUES; i++) + { + dispatchQInfo[i].callback = dummyCallback; + dispatchQInfo[i].callbackId = 0; + dispatchQInfo[i].dummyCallbackCount = 0; + dispatchQInfo[i].priority = IX_QMGR_Q_PRIORITY_2; + dispatchQInfo[i].statusWordOffset = 0; + dispatchQInfo[i].statusCheckValue = 0; + dispatchQInfo[i].statusMask = 0; + /* + * There are two interrupt registers, 32 bits each. One for the lower + * queues(0-31) and one for the upper queues(32-63). Therefore need to + * mod by 32 i.e the min upper queue identifier. + */ + dispatchQInfo[i].intRegCheckMask = (1<<(i%(IX_QMGR_MIN_QUEUPP_QID))); + + /* + * Set the Q types - will only be used with livelock + */ + ixQMgrQTypes[i] = IX_QMGR_TYPE_REALTIME_OTHER; + + /* Reset queue statistics */ + dispatcherStats.queueStats[i].callbackCnt = 0; + dispatcherStats.queueStats[i].priorityChangeCnt = 0; + dispatcherStats.queueStats[i].intNoCallbackCnt = 0; + dispatcherStats.queueStats[i].intLostCallbackCnt = 0; + dispatcherStats.queueStats[i].notificationEnabled = FALSE; + dispatcherStats.queueStats[i].srcSel = 0; + + } + + /* Priority table. Order the table from queue 0 to 63 */ + ixQMgrDispatcherReBuildPriorityTable(); + + /* Reset statistics */ + dispatcherStats.loopRunCnt = 0; + + /* Get the device ID for the underlying silicon */ + deviceId = ixFeatureCtrlDeviceRead(); + + /* Get the product ID for the underlying silicon */ + productId = ixFeatureCtrlProductIdRead(); + + /* + * Check featureCtrl to see if Livelock prevention is required + */ + ixQMgrOrigB0Dispatcher = ixFeatureCtrlSwConfigurationCheck( + IX_FEATURECTRL_ORIGB0_DISPATCHER); + + /* + * Check if the silicon supports the sticky interrupt feature. + * IF (IXP42X AND A0) -> No sticky interrupt feature supported + */ + if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == + (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) && + (IX_FEATURE_CTRL_SILICON_TYPE_A0 == + (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) + { + stickyIntSilicon = FALSE; + } + + /* + * IF user wants livelock prev option AND silicon supports sticky interrupt + * feature -> enable the sticky interrupt bit + */ + if ((IX_FEATURE_CTRL_SWCONFIG_DISABLED == ixQMgrOrigB0Dispatcher) && + stickyIntSilicon) + { + ixQMgrStickyInterruptRegEnable(); + } +} + +IX_STATUS +ixQMgrDispatcherPrioritySet (IxQMgrQId qId, + IxQMgrPriority priority) +{ + int ixQMgrLockKey; + + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if (!IX_QMGR_DISPATCHER_PRIORITY_CHECK(priority)) + { + return IX_QMGR_Q_INVALID_PRIORITY; + } + + ixQMgrLockKey = ixOsalIrqLock(); + + /* Change priority */ + dispatchQInfo[qId].priority = priority; + /* Set flag */ + rebuildTable = TRUE; + + ixOsalIrqUnlock(ixQMgrLockKey); + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qId].priorityChangeCnt++; +#endif + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrNotificationCallbackSet (IxQMgrQId qId, + IxQMgrCallback callback, + IxQMgrCallbackId callbackId) +{ + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if (NULL == callback) + { + /* Reset to dummy callback */ + dispatchQInfo[qId].callback = dummyCallback; + dispatchQInfo[qId].dummyCallbackCount = 0; + dispatchQInfo[qId].callbackId = 0; + } + else + { + dispatchQInfo[qId].callback = callback; + dispatchQInfo[qId].callbackId = callbackId; + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrNotificationEnable (IxQMgrQId qId, + IxQMgrSourceId srcSel) +{ + IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */ + IxQMgrQStatus qStatusOnExit; /* to this function */ + int ixQMgrLockKey; + +#ifndef NDEBUG + if (!ixQMgrQIsConfigured (qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if ((qId < IX_QMGR_MIN_QUEUPP_QID) && + !IX_QMGR_DISPATCHER_SOURCE_ID_CHECK(srcSel)) + { + /* QId 0-31 source id invalid */ + return IX_QMGR_INVALID_INT_SOURCE_ID; + } + + if ((IX_QMGR_Q_SOURCE_ID_NE != srcSel) && + (qId >= IX_QMGR_MIN_QUEUPP_QID)) + { + /* + * For queues 32-63 the interrupt source is fixed to the Nearly + * Empty status flag and therefore should have a srcSel of NE. + */ + return IX_QMGR_INVALID_INT_SOURCE_ID; + } +#endif + +#ifndef NDEBUG + dispatcherStats.queueStats[qId].notificationEnabled = TRUE; + dispatcherStats.queueStats[qId].srcSel = srcSel; +#endif + + /* Get the current queue status */ + ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry); + + /* + * Enabling interrupts results in Read-Modify-Write + * so need critical section + */ + + ixQMgrLockKey = ixOsalIrqLock(); + + /* Calculate the checkMask and checkValue for this q */ + ixQMgrAqmIfQStatusCheckValsCalc (qId, + srcSel, + &dispatchQInfo[qId].statusWordOffset, + &dispatchQInfo[qId].statusCheckValue, + &dispatchQInfo[qId].statusMask); + + + /* Set the interrupt source is this queue is in the range 0-31 */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + ixQMgrAqmIfIntSrcSelWrite (qId, srcSel); + } + + /* Enable the interrupt */ + ixQMgrAqmIfQInterruptEnable (qId); + + ixOsalIrqUnlock(ixQMgrLockKey); + + /* Get the current queue status */ + ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit); + + /* If the status has changed return a warning */ + if (qStatusOnEntry != qStatusOnExit) + { + return IX_QMGR_WARNING; + } + + return IX_SUCCESS; +} + + +IX_STATUS +ixQMgrNotificationDisable (IxQMgrQId qId) +{ + int ixQMgrLockKey; + +#ifndef NDEBUG + /* Validate parameters */ + if (!ixQMgrQIsConfigured (qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } +#endif + + /* + * Enabling interrupts results in Read-Modify-Write + * so need critical section + */ +#ifndef NDEBUG + dispatcherStats.queueStats[qId].notificationEnabled = FALSE; +#endif + + ixQMgrLockKey = ixOsalIrqLock(); + + ixQMgrAqmIfQInterruptDisable (qId); + + ixOsalIrqUnlock(ixQMgrLockKey); + + return IX_SUCCESS; +} + +void +ixQMgrStickyInterruptRegEnable(void) +{ + /* Use Aqm If function to set Interrupt Register0 Bit-3 */ + ixQMgrAqmIfIntSrcSelReg0Bit3Set (); +} + +#if !defined __XSCALE__ || defined __linux + +/* Count the number of leading zero bits in a word, + * and return the same value than the CLZ instruction. + * + * word (in) return value (out) + * 0x80000000 0 + * 0x40000000 1 + * ,,, ,,, + * 0x00000002 30 + * 0x00000001 31 + * 0x00000000 32 + * + * The C version of this function is used as a replacement + * for system not providing the equivalent of the CLZ + * assembly language instruction. + * + * Note that this version is big-endian + */ +unsigned int +ixQMgrCountLeadingZeros(UINT32 word) +{ + unsigned int leadingZerosCount = 0; + + if (word == 0) + { + return 32; + } + /* search the first bit set by testing the MSB and shifting the input word */ + while ((word & 0x80000000) == 0) + { + word <<= 1; + leadingZerosCount++; + } + return leadingZerosCount; +} +#endif /* not __XSCALE__ or __linux */ + +void +ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr) +{ + IxFeatureCtrlProductId productId = 0; + IxFeatureCtrlDeviceId deviceId = 0; + + /* Get the device ID for the underlying silicon */ + deviceId = ixFeatureCtrlDeviceRead(); + + /* Get the product ID for the underlying silicon */ + productId = ixFeatureCtrlProductIdRead (); + + /* IF (IXP42X AND A0 silicon) -> use ixQMgrDispatcherLoopRunA0 */ + if ((IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X == + (IX_FEATURE_CTRL_DEVICE_TYPE_MASK & deviceId)) && + (IX_FEATURE_CTRL_SILICON_TYPE_A0 == + (IX_FEATURE_CTRL_SILICON_STEPPING_MASK & productId))) + { + /*For IXP42X A0 silicon */ + *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunA0 ; + } + else /*For IXP42X B0 or IXP46X silicon*/ + { + if (IX_FEATURE_CTRL_SWCONFIG_ENABLED == ixQMgrOrigB0Dispatcher) + { + /* Default for IXP42X B0 and IXP46X silicon */ + *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0; + } + else + { + /* FeatureCtrl indicated that livelock dispatcher be used */ + *qDispatcherFuncPtr = &ixQMgrDispatcherLoopRunB0LLP; + } + } +} + +void +ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group) +{ + UINT32 intRegVal; /* Interrupt reg val */ + UINT32 intRegValAfterWrite; /* Interrupt reg val after writing back */ + UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ + UINT32 qStatusWordsB4Write[MAX_Q_STATUS_WORDS]; /* Status b4 interrupt write */ + UINT32 qStatusWordsAfterWrite[MAX_Q_STATUS_WORDS]; /* Status after interrupt write */ + IxQMgrQInfo *currDispatchQInfo; + BOOL statusChangeFlag; + + int priorityTableIndex;/* Priority table index */ + int qIndex; /* Current queue being processed */ + int endIndex; /* Index of last queue to process */ + +#ifndef NDEBUG + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); +#endif + + /* Read Q status registers before interrupt status read/write */ + ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsB4Write); + + /* Read the interrupt register */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); + + /* No bit set : nothing to process (the reaminder of the algorithm is + * based on the fact that the interrupt register value contains at + * least one bit set + */ + if (intRegVal == 0) + { +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } + + return; + } + + /* Write it back to clear the interrupt */ + ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); + + /* Read Q status registers after interrupt status read/write */ + ixQMgrAqmIfQStatusRegsRead (group, qStatusWordsAfterWrite); + + /* get the first queue Id from the interrupt register value */ + qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); + + /* check if any change occured during hw register modifications */ + if (IX_QMGR_QUELOW_GROUP == group) + { + statusChangeFlag = + (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]) || + (qStatusWordsB4Write[1] != qStatusWordsAfterWrite[1]) || + (qStatusWordsB4Write[2] != qStatusWordsAfterWrite[2]) || + (qStatusWordsB4Write[3] != qStatusWordsAfterWrite[3]); + } + else + { + statusChangeFlag = + (qStatusWordsB4Write[0] != qStatusWordsAfterWrite[0]); + /* Set the queue range based on the queue group to proccess */ + qIndex += IX_QMGR_MIN_QUEUPP_QID; + } + + if (statusChangeFlag == FALSE) + { + /* check if the interrupt register contains + * only 1 bit set (happy day scenario) + */ + currDispatchQInfo = &dispatchQInfo[qIndex]; + if (intRegVal == currDispatchQInfo->intRegCheckMask) + { + /* only 1 queue event triggered a notification * + * Call the callback function for this queue + */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + } + else + { + /* the event is triggered by more than 1 queue, + * the queue search will be starting from the beginning + * or the middle of the priority table + * + * the serach will end when all the bits of the interrupt + * register are cleared. There is no need to maintain + * a seperate value and test it at each iteration. + */ + if (IX_QMGR_QUELOW_GROUP == group) + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & lowPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; + } + } + else + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & uppPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; + } + } + + /* iterate following the priority table until all the bits + * of the interrupt register are cleared. + */ + do + { + qIndex = priorityTable[priorityTableIndex++]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + + /* Clear the interrupt register bit */ + intRegVal &= ~intRegCheckMask; + } + } + while(intRegVal); + } + } + else + { + /* A change in queue status occured during the hw interrupt + * register update. To maintain the interrupt consistency, it + * is necessary to iterate through all queues of the queue group. + */ + + /* Read interrupt status again */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegValAfterWrite); + + if (IX_QMGR_QUELOW_GROUP == group) + { + priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + endIndex = IX_QMGR_MAX_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + endIndex = IX_QMGR_MAX_UPP_QUE_PRIORITY_TABLE_INDEX; + } + + for ( ; priorityTableIndex<=endIndex; priorityTableIndex++) + { + qIndex = priorityTable[priorityTableIndex]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + + } /* if (intRegVal .. */ + + /* + * If interrupt bit is set in intRegValAfterWrite don't + * proceed as this will be caught in next interrupt + */ + else if ((intRegValAfterWrite & intRegCheckMask) == 0) + { + /* Check if an interrupt was lost for this Q */ + if (ixQMgrAqmIfQStatusCheck(qStatusWordsB4Write, + qStatusWordsAfterWrite, + currDispatchQInfo->statusWordOffset, + currDispatchQInfo->statusCheckValue, + currDispatchQInfo->statusMask)) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + dispatchQInfo[qIndex].callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; + dispatcherStats.queueStats[qIndex].intLostCallbackCnt++; +#endif + } /* if ixQMgrAqmIfQStatusCheck(.. */ + } /* else if ((intRegValAfterWrite ... */ + } /* for (priorityTableIndex=0 ... */ + } + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif +} + + + +void +ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group) +{ + UINT32 intRegVal; /* Interrupt reg val */ + UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ + IxQMgrQInfo *currDispatchQInfo; + + + int priorityTableIndex; /* Priority table index */ + int qIndex; /* Current queue being processed */ + +#ifndef NDEBUG + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); +#endif + + /* Read the interrupt register */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); + + + /* No queue has interrupt register set */ + if (intRegVal != 0) + { + + /* Write it back to clear the interrupt */ + ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); + + /* get the first queue Id from the interrupt register value */ + qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); + + if (IX_QMGR_QUEUPP_GROUP == group) + { + /* Set the queue range based on the queue group to proccess */ + qIndex += IX_QMGR_MIN_QUEUPP_QID; + } + + /* check if the interrupt register contains + * only 1 bit set + * For example: + * intRegVal = 0x0010 + * currDispatchQInfo->intRegCheckMask = 0x0010 + * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE. + */ + currDispatchQInfo = &dispatchQInfo[qIndex]; + if (intRegVal == currDispatchQInfo->intRegCheckMask) + { + /* only 1 queue event triggered a notification * + * Call the callback function for this queue + */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + } + else + { + /* the event is triggered by more than 1 queue, + * the queue search will be starting from the beginning + * or the middle of the priority table + * + * the serach will end when all the bits of the interrupt + * register are cleared. There is no need to maintain + * a seperate value and test it at each iteration. + */ + if (IX_QMGR_QUELOW_GROUP == group) + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & lowPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; + } + } + else + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & uppPriorityTableFirstHalfMask) + { + priorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; + } + } + + /* iterate following the priority table until all the bits + * of the interrupt register are cleared. + */ + do + { + qIndex = priorityTable[priorityTableIndex++]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* Call the callback function for this queue */ + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + + /* Clear the interrupt register bit */ + intRegVal &= ~intRegCheckMask; + } + } + while(intRegVal); + } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */ + } /* End of intRegVal != 0 */ + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } +} + +void +ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group) +{ + UINT32 intRegVal =0; /* Interrupt reg val */ + UINT32 intRegCheckMask; /* Mask for checking interrupt bits */ + IxQMgrQInfo *currDispatchQInfo; + + int priorityTableIndex; /* Priority table index */ + int qIndex; /* Current queue being processed */ + + UINT32 intRegValCopy = 0; + UINT32 intEnableRegVal = 0; + UINT8 i = 0; + +#ifndef NDEBUG + IX_OSAL_ASSERT((group == IX_QMGR_QUEUPP_GROUP) || + (group == IX_QMGR_QUELOW_GROUP)); +#endif + + /* Read the interrupt register */ + ixQMgrAqmIfQInterruptRegRead (group, &intRegVal); + + /* + * mask any interrupts that are not enabled + */ + ixQMgrAqmIfQInterruptEnableRegRead (group, &intEnableRegVal); + intRegVal &= intEnableRegVal; + + /* No queue has interrupt register set */ + if (intRegVal != 0) + { + if (IX_QMGR_QUELOW_GROUP == group) + { + /* + * As the sticky bit is set, the interrupt register will + * not clear if write back at this point because the condition + * has not been cleared. Take a copy and write back later after + * the condition has been cleared + */ + intRegValCopy = intRegVal; + } + else + { + /* no sticky for upper Q's, so write back now */ + ixQMgrAqmIfQInterruptRegWrite (group, intRegVal); + } + + /* get the first queue Id from the interrupt register value */ + qIndex = (BITS_PER_WORD - 1) - ixQMgrCountLeadingZeros(intRegVal); + + if (IX_QMGR_QUEUPP_GROUP == group) + { + /* Set the queue range based on the queue group to proccess */ + qIndex += IX_QMGR_MIN_QUEUPP_QID; + } + + /* check if the interrupt register contains + * only 1 bit set + * For example: + * intRegVal = 0x0010 + * currDispatchQInfo->intRegCheckMask = 0x0010 + * intRegVal == currDispatchQInfo->intRegCheckMask is TRUE. + */ + currDispatchQInfo = &dispatchQInfo[qIndex]; + if (intRegVal == currDispatchQInfo->intRegCheckMask) + { + + /* + * check if Q type periodic - only lower queues can + * have there type set to periodic + */ + if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex]) + { + /* + * Disable the notifications on any sporadics + */ + for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i]) + { + ixQMgrNotificationDisable(i); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[i].disableCount++; +#endif + } + } + } + + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + } + else + { + /* the event is triggered by more than 1 queue, + * the queue search will be starting from the beginning + * or the middle of the priority table + * + * the serach will end when all the bits of the interrupt + * register are cleared. There is no need to maintain + * a seperate value and test it at each iteration. + */ + if (IX_QMGR_QUELOW_GROUP == group) + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & lowPriorityTableFirstHalfMask) + { + priorityTableIndex = + IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = + IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX; + } + } + else + { + /* check if any bit related to queues in the first + * half of the priority table is set + */ + if (intRegVal & uppPriorityTableFirstHalfMask) + { + priorityTableIndex = + IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + } + else + { + priorityTableIndex = + IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX; + } + } + + /* iterate following the priority table until all the bits + * of the interrupt register are cleared. + */ + do + { + qIndex = priorityTable[priorityTableIndex++]; + currDispatchQInfo = &dispatchQInfo[qIndex]; + intRegCheckMask = currDispatchQInfo->intRegCheckMask; + + /* If this queue caused this interrupt to be raised */ + if (intRegVal & intRegCheckMask) + { + /* + * check if Q type periodic - only lower queues can + * have there type set to periodic. There can only be one + * periodic queue, so the sporadics are only disabled once. + */ + if (IX_QMGR_TYPE_REALTIME_PERIODIC == ixQMgrQTypes[qIndex]) + { + /* + * Disable the notifications on any sporadics + */ + for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + if (IX_QMGR_TYPE_REALTIME_SPORADIC == + ixQMgrQTypes[i]) + { + ixQMgrNotificationDisable(i); + /* + * remove from intRegVal as we don't want + * to service any sporadics now + */ + intRegVal &= ~dispatchQInfo[i].intRegCheckMask; +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[i].disableCount++; +#endif + } + } + } + + currDispatchQInfo->callback (qIndex, + currDispatchQInfo->callbackId); +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.queueStats[qIndex].callbackCnt++; +#endif + /* Clear the interrupt register bit */ + intRegVal &= ~intRegCheckMask; + } + } + while(intRegVal); + } /*End of intRegVal == currDispatchQInfo->intRegCheckMask */ + } /* End of intRegVal != 0 */ + +#ifndef NDEBUG + /* Update statistics */ + dispatcherStats.loopRunCnt++; +#endif + + if ((intRegValCopy != 0) && (IX_QMGR_QUELOW_GROUP == group)) + { + /* + * lower groups (therefore sticky) AND at least one enabled interrupt + * Write back to clear the interrupt + */ + ixQMgrAqmIfQInterruptRegWrite (IX_QMGR_QUELOW_GROUP, intRegValCopy); + } + + /* Rebuild the priority table if needed */ + if (rebuildTable) + { + ixQMgrDispatcherReBuildPriorityTable (); + } +} + +PRIVATE void +ixQMgrDispatcherReBuildPriorityTable (void) +{ + UINT32 qIndex; + UINT32 priority; + int lowQuePriorityTableIndex = IX_QMGR_MIN_LOW_QUE_PRIORITY_TABLE_INDEX; + int uppQuePriorityTableIndex = IX_QMGR_MIN_UPP_QUE_PRIORITY_TABLE_INDEX; + + /* Reset the rebuild flag */ + rebuildTable = FALSE; + + /* initialize the mak used to identify the queues in the first half + * of the priority table + */ + lowPriorityTableFirstHalfMask = 0; + uppPriorityTableFirstHalfMask = 0; + + /* For each priority level */ + for(priority=0; priority<IX_QMGR_NUM_PRIORITY_LEVELS; priority++) + { + /* Foreach low queue in this priority */ + for(qIndex=0; qIndex<IX_QMGR_MIN_QUEUPP_QID; qIndex++) + { + if (dispatchQInfo[qIndex].priority == priority) + { + /* build the priority table bitmask which match the + * queues of the first half of the priority table + */ + if (lowQuePriorityTableIndex < IX_QMGR_MID_LOW_QUE_PRIORITY_TABLE_INDEX) + { + lowPriorityTableFirstHalfMask |= dispatchQInfo[qIndex].intRegCheckMask; + } + /* build the priority table */ + priorityTable[lowQuePriorityTableIndex++] = qIndex; + } + } + /* Foreach upp queue */ + for(qIndex=IX_QMGR_MIN_QUEUPP_QID; qIndex<=IX_QMGR_MAX_QID; qIndex++) + { + if (dispatchQInfo[qIndex].priority == priority) + { + /* build the priority table bitmask which match the + * queues of the first half of the priority table + */ + if (uppQuePriorityTableIndex < IX_QMGR_MID_UPP_QUE_PRIORITY_TABLE_INDEX) + { + uppPriorityTableFirstHalfMask |= dispatchQInfo[qIndex].intRegCheckMask; + } + /* build the priority table */ + priorityTable[uppQuePriorityTableIndex++] = qIndex; + } + } + } +} + +IxQMgrDispatcherStats* +ixQMgrDispatcherStatsGet (void) +{ + return &dispatcherStats; +} + +PRIVATE void +dummyCallback (IxQMgrQId qId, + IxQMgrCallbackId cbId) +{ + /* Throttle the trace message */ + if ((dispatchQInfo[qId].dummyCallbackCount % LOG_THROTTLE_COUNT) == 0) + { + IX_QMGR_LOG_WARNING2("--> dummyCallback: qId (%d), callbackId (%d)\n",qId,cbId); + } + dispatchQInfo[qId].dummyCallbackCount++; + +#ifndef NDEBUG + /* Update statistcs */ + dispatcherStats.queueStats[qId].intNoCallbackCnt++; +#endif +} +void +ixQMgrLLPShow (int resetStats) +{ +#ifndef NDEBUG + UINT8 i = 0; + UINT32 intEnableRegVal = 0; + + printf ("Livelock statistics are printed on the fly.\n"); + printf ("qId Type EnableCnt DisableCnt IntEnableState Callbacks\n"); + printf ("=== ======== ========= ========== ============== =========\n"); + + for (i=0; i<= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + if (ixQMgrQTypes[i] != IX_QMGR_TYPE_REALTIME_OTHER) + { + printf (" %2d ", i); + + if (ixQMgrQTypes[i] == IX_QMGR_TYPE_REALTIME_SPORADIC) + { + printf ("Sporadic"); + } + else + { + printf ("Periodic"); + } + + + ixQMgrAqmIfQInterruptEnableRegRead (IX_QMGR_QUELOW_GROUP, + &intEnableRegVal); + + + intEnableRegVal &= dispatchQInfo[i].intRegCheckMask; + intEnableRegVal = intEnableRegVal >> i; + + printf (" %10d %10d %10d %10d\n", + dispatcherStats.queueStats[i].enableCount, + dispatcherStats.queueStats[i].disableCount, + intEnableRegVal, + dispatcherStats.queueStats[i].callbackCnt); + + if (resetStats) + { + dispatcherStats.queueStats[i].enableCount = + dispatcherStats.queueStats[i].disableCount = + dispatcherStats.queueStats[i].callbackCnt = 0; + } + } + } +#else + IX_QMGR_LOG0("Livelock Prevention statistics are only collected in debug mode\n"); +#endif +} + +void +ixQMgrPeriodicDone (void) +{ + UINT32 i = 0; + UINT32 ixQMgrLockKey = 0; + + /* + * for the lower queues + */ + for (i=0; i <= IX_QMGR_MAX_LOW_QUE_TABLE_INDEX; i++) + { + /* + * check for sporadics + */ + if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrQTypes[i]) + { + /* + * enable any sporadics + */ + ixQMgrLockKey = ixOsalIrqLock(); + ixQMgrAqmIfQInterruptEnable(i); + ixOsalIrqUnlock(ixQMgrLockKey); +#ifndef NDEBUG + /* + * Update statistics + */ + dispatcherStats.queueStats[i].enableCount++; + dispatcherStats.queueStats[i].notificationEnabled = TRUE; +#endif + } + } +} +IX_STATUS +ixQMgrCallbackTypeSet (IxQMgrQId qId, + IxQMgrType type) +{ + UINT32 ixQMgrLockKey = 0; + IxQMgrType ixQMgrOldType =0; + +#ifndef NDEBUG + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + if (qId >= IX_QMGR_MIN_QUEUPP_QID) + { + return IX_QMGR_PARAMETER_ERROR; + } + if(!IX_QMGR_DISPATCHER_CALLBACK_TYPE_CHECK(type)) + { + return IX_QMGR_PARAMETER_ERROR; + } +#endif + + ixQMgrOldType = ixQMgrQTypes[qId]; + ixQMgrQTypes[qId] = type; + + /* + * check if Q has been changed from type SPORADIC + */ + if (IX_QMGR_TYPE_REALTIME_SPORADIC == ixQMgrOldType) + { + /* + * previously Q was a SPORADIC, this means that LLP + * might have had it disabled. enable it now. + */ + ixQMgrLockKey = ixOsalIrqLock(); + ixQMgrAqmIfQInterruptEnable(qId); + ixOsalIrqUnlock(ixQMgrLockKey); + +#ifndef NDEBUG + /* + * Update statistics + */ + dispatcherStats.queueStats[qId].enableCount++; +#endif + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrCallbackTypeGet (IxQMgrQId qId, + IxQMgrType *type) +{ +#ifndef NDEBUG + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + if (qId >= IX_QMGR_MIN_QUEUPP_QID) + { + return IX_QMGR_PARAMETER_ERROR; + } + if(type == NULL) + { + return IX_QMGR_PARAMETER_ERROR; + } +#endif + + *type = ixQMgrQTypes[qId]; + return IX_SUCCESS; +} diff --git a/drivers/net/npe/IxQMgrInit.c b/drivers/net/npe/IxQMgrInit.c new file mode 100644 index 0000000000..b00c22d08e --- /dev/null +++ b/drivers/net/npe/IxQMgrInit.c @@ -0,0 +1,233 @@ +/** + * @file IxQMgrInit.c + * + * @author Intel Corporation + * @date 30-Oct-2001 + * + * @brief: Provided initialization of the QMgr component and its subcomponents. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * System defined include files. + */ + +/* + * User defined include files. + */ +#include "IxOsal.h" +#include "IxQMgr.h" +#include "IxQMgrQCfg_p.h" +#include "IxQMgrDispatcher_p.h" +#include "IxQMgrLog_p.h" +#include "IxQMgrQAccess_p.h" +#include "IxQMgrDefines_p.h" +#include "IxQMgrAqmIf_p.h" + +/* + * Set to true if initialized + * N.B. global so integration/unit tests can reinitialize + */ +BOOL qMgrIsInitialized = FALSE; + +/* + * Function definitions. + */ +IX_STATUS +ixQMgrInit (void) +{ + if (qMgrIsInitialized) + { + IX_QMGR_LOG0("ixQMgrInit: IxQMgr already initialised\n"); + return IX_FAIL; + } + + /* Initialise the QCfg component */ + ixQMgrQCfgInit (); + + /* Initialise the Dispatcher component */ + ixQMgrDispatcherInit (); + + /* Initialise the Access component */ + ixQMgrQAccessInit (); + + /* Initialization complete */ + qMgrIsInitialized = TRUE; + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrUnload (void) +{ + if (!qMgrIsInitialized) + { + return IX_FAIL; + } + + /* Uninitialise the QCfg component */ + ixQMgrQCfgUninit (); + + /* Uninitialization complete */ + qMgrIsInitialized = FALSE; + + return IX_SUCCESS; +} + +void +ixQMgrShow (void) +{ + IxQMgrQCfgStats *qCfgStats = NULL; + IxQMgrDispatcherStats *dispatcherStats = NULL; + int i; + UINT32 lowIntRegRead, upIntRegRead; + + qCfgStats = ixQMgrQCfgStatsGet (); + dispatcherStats = ixQMgrDispatcherStatsGet (); + ixQMgrAqmIfQInterruptRegRead (IX_QMGR_QUELOW_GROUP, &lowIntRegRead); + ixQMgrAqmIfQInterruptRegRead (IX_QMGR_QUEUPP_GROUP, &upIntRegRead); + printf("Generic Stats........\n"); + printf("=====================\n"); + printf("Loop Run Count..........%u\n",dispatcherStats->loopRunCnt); + printf("Watermark set count.....%d\n", qCfgStats->wmSetCnt); + printf("===========================================\n"); + printf("On the fly Interrupt Register Stats........\n"); + printf("===========================================\n"); + printf("Lower Interrupt Register............0x%08x\n",lowIntRegRead); + printf("Upper Interrupt Register............0x%08x\n",upIntRegRead); + printf("==============================================\n"); + printf("Queue Specific Stats........\n"); + printf("============================\n"); + + for (i=0; i<IX_QMGR_MAX_NUM_QUEUES; i++) + { + if (ixQMgrQIsConfigured(i)) + { + ixQMgrQShow(i); + } + } + + printf("============================\n"); +} + +IX_STATUS +ixQMgrQShow (IxQMgrQId qId) +{ + IxQMgrQCfgStats *qCfgStats = NULL; + IxQMgrDispatcherStats *dispatcherStats = NULL; + + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + dispatcherStats = ixQMgrDispatcherStatsGet (); + qCfgStats = ixQMgrQCfgQStatsGet (qId); + + printf("QId %d\n", qId); + printf("======\n"); + printf(" IxQMgrQCfg Stats\n"); + printf(" Name..................... \"%s\"\n", qCfgStats->qStats[qId].qName); + printf(" Size in words............ %u\n", qCfgStats->qStats[qId].qSizeInWords); + printf(" Entry size in words...... %u\n", qCfgStats->qStats[qId].qEntrySizeInWords); + printf(" Nearly empty watermark... %u\n", qCfgStats->qStats[qId].ne); + printf(" Nearly full watermark.... %u\n", qCfgStats->qStats[qId].nf); + printf(" Number of full entries... %u\n", qCfgStats->qStats[qId].numEntries); + printf(" Sram base address........ 0x%X\n", qCfgStats->qStats[qId].baseAddress); + printf(" Read pointer............. 0x%X\n", qCfgStats->qStats[qId].readPtr); + printf(" Write pointer............ 0x%X\n", qCfgStats->qStats[qId].writePtr); + +#ifndef NDEBUG + if (dispatcherStats->queueStats[qId].notificationEnabled) + { + char *localEvent = "none ????"; + switch (dispatcherStats->queueStats[qId].srcSel) + { + case IX_QMGR_Q_SOURCE_ID_E: + localEvent = "Empty"; + break; + case IX_QMGR_Q_SOURCE_ID_NE: + localEvent = "Nearly Empty"; + break; + case IX_QMGR_Q_SOURCE_ID_NF: + localEvent = "Nearly Full"; + break; + case IX_QMGR_Q_SOURCE_ID_F: + localEvent = "Full"; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_E: + localEvent = "Not Empty"; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_NE: + localEvent = "Not Nearly Empty"; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_NF: + localEvent = "Not Nearly Full"; + break; + case IX_QMGR_Q_SOURCE_ID_NOT_F: + localEvent = "Not Full"; + break; + default : + break; + } + printf(" Notifications localEvent...... %s\n", localEvent); + } + else + { + printf(" Notifications............ not enabled\n"); + } + printf(" IxQMgrDispatcher Stats\n"); + printf(" Callback count................%d\n", + dispatcherStats->queueStats[qId].callbackCnt); + printf(" Priority change count.........%d\n", + dispatcherStats->queueStats[qId].priorityChangeCnt); + printf(" Interrupt no callback count...%d\n", + dispatcherStats->queueStats[qId].intNoCallbackCnt); + printf(" Interrupt lost callback count...%d\n", + dispatcherStats->queueStats[qId].intLostCallbackCnt); +#endif + + return IX_SUCCESS; +} + + + + diff --git a/drivers/net/npe/IxQMgrQAccess.c b/drivers/net/npe/IxQMgrQAccess.c new file mode 100644 index 0000000000..8885736246 --- /dev/null +++ b/drivers/net/npe/IxQMgrQAccess.c @@ -0,0 +1,796 @@ +/** + * @file IxQMgrQAccess.c + * + * @author Intel Corporation + * @date 30-Oct-2001 + * + * @brief This file contains functions for putting entries on a queue and + * removing entries from a queue. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * Inlines are compiled as function when this is defined. + * N.B. Must be placed before #include of "IxQMgr.h" + */ +#ifndef IXQMGR_H +# define IXQMGRQACCESS_C +#else +# error +#endif + +/* + * System defined include files. + */ + +/* + * User defined include files. + */ +#include "IxQMgr.h" +#include "IxQMgrAqmIf_p.h" +#include "IxQMgrQAccess_p.h" +#include "IxQMgrQCfg_p.h" +#include "IxQMgrDefines_p.h" + +/* + * Global variables and extern definitions + */ +extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; + +/* + * Function definitions. + */ +void +ixQMgrQAccessInit (void) +{ +} + +IX_STATUS +ixQMgrQReadWithChecks (IxQMgrQId qId, + UINT32 *entry) +{ + IxQMgrQEntrySizeInWords entrySizeInWords; + IxQMgrQInlinedReadWriteInfo *infoPtr; + + if (NULL == entry) + { + return IX_QMGR_PARAMETER_ERROR; + } + + /* Check QId */ + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + /* Get the q entry size in words */ + entrySizeInWords = ixQMgrQEntrySizeInWordsGet (qId); + + ixQMgrAqmIfQPop (qId, entrySizeInWords, entry); + + /* reset the current read count if the counter wrapped around + * (unsigned arithmetic) + */ + infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + if (infoPtr->qReadCount-- > infoPtr->qSizeInEntries) + { + infoPtr->qReadCount = 0; + } + + /* Check if underflow occurred on the read */ + if (ixQMgrAqmIfUnderflowCheck (qId)) + { + return IX_QMGR_Q_UNDERFLOW; + } + + return IX_SUCCESS; +} + +/* this function reads the remaining of the q entry + * for queues configured with many words. + * (the first word of the entry is already read + * in the inlined function and the entry pointer already + * incremented + */ +IX_STATUS +ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, + UINT32 *entry) +{ + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 entrySize = infoPtr->qEntrySizeInWords; + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + + while (--entrySize) + { + /* read the entry and accumulate the result */ + *(++entry) = IX_OSAL_READ_LONG(++qAccRegAddr); + } + /* underflow is available for lower queues only */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* get the queue status */ + UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); + + /* check the underflow status */ + if (status & infoPtr->qUflowStatBitMask) + { + /* the queue is empty + * clear the underflow status bit if it was set + */ + IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qUflowStatBitMask); + return IX_QMGR_Q_UNDERFLOW; + } + } + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrQWriteWithChecks (IxQMgrQId qId, + UINT32 *entry) +{ + IxQMgrQEntrySizeInWords entrySizeInWords; + IxQMgrQInlinedReadWriteInfo *infoPtr; + + if (NULL == entry) + { + return IX_QMGR_PARAMETER_ERROR; + } + + /* Check QId */ + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + /* Get the q entry size in words */ + entrySizeInWords = ixQMgrQEntrySizeInWordsGet (qId); + + ixQMgrAqmIfQPush (qId, entrySizeInWords, entry); + + /* reset the current read count if the counter wrapped around + * (unsigned arithmetic) + */ + infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + if (infoPtr->qWriteCount++ >= infoPtr->qSizeInEntries) + { + infoPtr->qWriteCount = infoPtr->qSizeInEntries; + } + + /* Check if overflow occurred on the write*/ + if (ixQMgrAqmIfOverflowCheck (qId)) + { + return IX_QMGR_Q_OVERFLOW; + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrQPeek (IxQMgrQId qId, + unsigned int entryIndex, + UINT32 *entry) +{ + unsigned int numEntries; + +#ifndef NDEBUG + if ((NULL == entry) || (entryIndex >= IX_QMGR_Q_SIZE_INVALID)) + { + return IX_QMGR_PARAMETER_ERROR; + } + + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } +#endif + + if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &numEntries)) + { + return IX_FAIL; + } + + if (entryIndex >= numEntries) /* entryIndex starts at 0 */ + { + return IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS; + } + + return ixQMgrAqmIfQPeek (qId, entryIndex, entry); +} + +IX_STATUS +ixQMgrQPoke (IxQMgrQId qId, + unsigned entryIndex, + UINT32 *entry) +{ + unsigned int numEntries; + +#ifndef NDEBUG + if ((NULL == entry) || (entryIndex > 128)) + { + return IX_QMGR_PARAMETER_ERROR; + } + + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } +#endif + + if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &numEntries)) + { + return IX_FAIL; + } + + if (numEntries < (entryIndex + 1)) /* entryIndex starts at 0 */ + { + return IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS; + } + + return ixQMgrAqmIfQPoke (qId, entryIndex, entry); +} + +IX_STATUS +ixQMgrQStatusGetWithChecks (IxQMgrQId qId, + IxQMgrQStatus *qStatus) +{ + if (NULL == qStatus) + { + return IX_QMGR_PARAMETER_ERROR; + } + + if (!ixQMgrQIsConfigured (qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + ixQMgrAqmIfQueStatRead (qId, qStatus); + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrQNumEntriesGet (IxQMgrQId qId, + unsigned *numEntriesPtr) +{ + UINT32 qPtrs; + UINT32 qStatus; + unsigned numEntries; + IxQMgrQInlinedReadWriteInfo *infoPtr; + + +#ifndef NDEBUG + if (NULL == numEntriesPtr) + { + return IX_QMGR_PARAMETER_ERROR; + } + + /* Check QId */ + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } +#endif + + /* get fast access data */ + infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + + /* get snapshot */ + qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr); + + /* Mod subtraction of pointers to get number of words in Q. */ + numEntries = (qPtrs - (qPtrs >> 7)) & 0x7f; + + if (numEntries == 0) + { + /* + * Could mean either full or empty queue + * so look at status + */ + ixQMgrAqmIfQueStatRead (qId, &qStatus); + + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + if (qStatus & IX_QMGR_Q_STATUS_E_BIT_MASK) + { + /* Empty */ + *numEntriesPtr = 0; + } + else if (qStatus & IX_QMGR_Q_STATUS_F_BIT_MASK) + { + /* Full */ + *numEntriesPtr = infoPtr->qSizeInEntries; + } + else + { + /* + * Queue status and read/write pointers are volatile. + * The queue state has changed since we took the + * snapshot of the read and write pointers. + * Client can retry if they wish + */ + *numEntriesPtr = 0; + return IX_QMGR_WARNING; + } + } + else /* It is an upper queue which does not have an empty status bit maintained */ + { + if (qStatus & IX_QMGR_Q_STATUS_F_BIT_MASK) + { + /* The queue is Full at the time of snapshot. */ + *numEntriesPtr = infoPtr->qSizeInEntries; + } + else + { + /* The queue is either empty, either moving, + * Client can retry if they wish + */ + *numEntriesPtr = 0; + return IX_QMGR_WARNING; + } + } + } + else + { + *numEntriesPtr = (numEntries / infoPtr->qEntrySizeInWords) & (infoPtr->qSizeInEntries - 1); + } + + return IX_SUCCESS; +} + +#if defined(__wince) && defined(NO_INLINE_APIS) + +PUBLIC IX_STATUS +ixQMgrQRead (IxQMgrQId qId, + UINT32 *entryPtr) +{ + extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 entry, entrySize; + + /* get a new entry */ + entrySize = infoPtr->qEntrySizeInWords; + entry = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr); + + if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) + { + *entryPtr = entry; + /* process the remaining part of the entry */ + return ixQMgrQReadMWordsMinus1(qId, entryPtr); + } + + /* underflow is available for lower queues only */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* the counter of queue entries is decremented. In happy + * day scenario there are many entries in the queue + * and the counter does not reach zero. + */ + if (infoPtr->qReadCount-- == 0) + { + /* There is maybe no entry in the queue + * qReadCount is now negative, but will be corrected before + * the function returns. + */ + UINT32 qPtrs; /* queue internal pointers */ + + /* when a queue is empty, the hw guarantees to return + * a null value. If the value is not null, the queue is + * not empty. + */ + if (entry == 0) + { + /* get the queue status */ + UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); + + /* check the underflow status */ + if (status & infoPtr->qUflowStatBitMask) + { + /* the queue is empty + * clear the underflow status bit if it was set + */ + IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qUflowStatBitMask); + *entryPtr = 0; + infoPtr->qReadCount = 0; + return IX_QMGR_Q_UNDERFLOW; + } + } + /* store the result */ + *entryPtr = entry; + + /* No underflow occured : someone is filling the queue + * or the queue contains null entries. + * The current counter needs to be + * updated from the current number of entries in the queue + */ + + /* get snapshot of queue pointers */ + qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr); + + /* Mod subtraction of pointers to get number of words in Q. */ + qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; + + if (qPtrs == 0) + { + /* no entry in the queue */ + infoPtr->qReadCount = 0; + } + else + { + /* convert the number of words inside the queue + * to a number of entries + */ + infoPtr->qReadCount = qPtrs & (infoPtr->qSizeInEntries - 1); + } + return IX_SUCCESS; + } + } + *entryPtr = entry; + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixQMgrQBurstRead (IxQMgrQId qId, + UINT32 numEntries, + UINT32 *entries) +{ + extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 nullCheckEntry; + + if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) + { + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + + /* the code is optimized to take care of data dependencies: + * Durig a read, there are a few cycles needed to get the + * read complete. During these cycles, it is poossible to + * do some CPU, e.g. increment pointers and decrement + * counters. + */ + + /* fetch a queue entry */ + nullCheckEntry = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr); + + /* iterate the specified number of queue entries */ + while (--numEntries) + { + /* check the result of the previous read */ + if (nullCheckEntry == 0) + { + /* if we read a NULL entry, stop. We have underflowed */ + break; + } + else + { + /* write the entry */ + *entries = nullCheckEntry; + /* fetch next entry */ + nullCheckEntry = IX_OSAL_READ_LONG(qAccRegAddr); + /* increment the write address */ + entries++; + } + } + /* write the pre-fetched entry */ + *entries = nullCheckEntry; + } + else + { + IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; + /* read the specified number of queue entries */ + nullCheckEntry = 0; + while (numEntries--) + { + int i; + + for (i = 0; i < entrySizeInWords; i++) + { + *entries = IX_OSAL_READ_LONG(infoPtr->qAccRegAddr + i); + nullCheckEntry |= *entries++; + } + + /* if we read a NULL entry, stop. We have underflowed */ + if (nullCheckEntry == 0) + { + break; + } + nullCheckEntry = 0; + } + } + + /* reset the current read count : next access to the read function + * will force a underflow status check + */ + infoPtr->qWriteCount = 0; + + /* Check if underflow occurred on the read */ + if (nullCheckEntry == 0 && qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* get the queue status */ + UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); + + if (status & infoPtr->qUflowStatBitMask) + { + /* clear the underflow status bit if it was set */ + IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qUflowStatBitMask); + return IX_QMGR_Q_UNDERFLOW; + } + } + + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixQMgrQWrite (IxQMgrQId qId, + UINT32 *entry) +{ + extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 entrySize; + + /* write the entry */ + IX_OSAL_WRITE_LONG(infoPtr->qAccRegAddr, *entry); + entrySize = infoPtr->qEntrySizeInWords; + + if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) + { + /* process the remaining part of the entry */ + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + while (--entrySize) + { + ++entry; + IX_OSAL_WRITE_LONG(++qAccRegAddr, *entry); + } + entrySize = infoPtr->qEntrySizeInWords; + } + + /* overflow is available for lower queues only */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + UINT32 qSize = infoPtr->qSizeInEntries; + /* increment the current number of entries in the queue + * and check for overflow + */ + if (infoPtr->qWriteCount++ == qSize) + { + /* the queue may have overflow */ + UINT32 qPtrs; /* queue internal pointers */ + + /* get the queue status */ + UINT32 status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); + + /* read the status twice because the status may + * not be immediately ready after the write operation + */ + if ((status & infoPtr->qOflowStatBitMask) || + ((status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr)) + & infoPtr->qOflowStatBitMask)) + { + /* the queue is full, clear the overflow status + * bit if it was set + */ + IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qOflowStatBitMask); + infoPtr->qWriteCount = infoPtr->qSizeInEntries; + return IX_QMGR_Q_OVERFLOW; + } + /* No overflow occured : someone is draining the queue + * and the current counter needs to be + * updated from the current number of entries in the queue + */ + + /* get q pointer snapshot */ + qPtrs = IX_OSAL_READ_LONG(infoPtr->qConfigRegAddr); + + /* Mod subtraction of pointers to get number of words in Q. */ + qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; + + if (qPtrs == 0) + { + /* the queue may be full at the time of the + * snapshot. Next access will check + * the overflow status again. + */ + infoPtr->qWriteCount = qSize; + } + else + { + /* convert the number of words to a number of entries */ + if (entrySize == IX_QMGR_Q_ENTRY_SIZE1) + { + infoPtr->qWriteCount = qPtrs & (qSize - 1); + } + else + { + infoPtr->qWriteCount = (qPtrs / entrySize) & (qSize - 1); + } + } + } + } + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixQMgrQBurstWrite (IxQMgrQId qId, + unsigned numEntries, + UINT32 *entries) +{ + extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 status; + + /* update the current write count */ + infoPtr->qWriteCount += numEntries; + + if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) + { + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + while (numEntries--) + { + IX_OSAL_WRITE_LONG(qAccRegAddr, *entries); + entries++; + } + } + else + { + IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; + int i; + + /* write each queue entry */ + while (numEntries--) + { + /* write the queueEntrySize number of words for each entry */ + for (i = 0; i < entrySizeInWords; i++) + { + IX_OSAL_WRITE_LONG((infoPtr->qAccRegAddr + i), *entries); + entries++; + } + } + } + + /* check if the write count overflows */ + if (infoPtr->qWriteCount > infoPtr->qSizeInEntries) + { + /* reset the current write count */ + infoPtr->qWriteCount = infoPtr->qSizeInEntries; + } + + /* Check if overflow occurred on the write operation */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* get the queue status */ + status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr); + + /* read the status twice because the status may + * not be ready at the time of the write + */ + if ((status & infoPtr->qOflowStatBitMask) || + ((status = IX_OSAL_READ_LONG(infoPtr->qUOStatRegAddr)) + & infoPtr->qOflowStatBitMask)) + { + /* clear the underflow status bit if it was set */ + IX_OSAL_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qOflowStatBitMask); + return IX_QMGR_Q_OVERFLOW; + } + } + + return IX_SUCCESS; +} + +PUBLIC IX_STATUS +ixQMgrQStatusGet (IxQMgrQId qId, + IxQMgrQStatus *qStatus) +{ + /* read the status of a queue in the range 0-31 */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + extern UINT32 ixQMgrAqmIfQueLowStatRegAddr[]; + extern UINT32 ixQMgrAqmIfQueLowStatBitsOffset[]; + extern UINT32 ixQMgrAqmIfQueLowStatBitsMask; + extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + volatile UINT32 *lowStatRegAddr = (UINT32*)ixQMgrAqmIfQueLowStatRegAddr[qId]; + volatile UINT32 *qUOStatRegAddr = infoPtr->qUOStatRegAddr; + + UINT32 lowStatBitsOffset = ixQMgrAqmIfQueLowStatBitsOffset[qId]; + UINT32 lowStatBitsMask = ixQMgrAqmIfQueLowStatBitsMask; + UINT32 underflowBitMask = infoPtr->qUflowStatBitMask; + UINT32 overflowBitMask = infoPtr->qOflowStatBitMask; + + /* read the status register for this queue */ + *qStatus = IX_OSAL_READ_LONG(lowStatRegAddr); + /* mask out the status bits relevant only to this queue */ + *qStatus = (*qStatus >> lowStatBitsOffset) & lowStatBitsMask; + + /* Check if the queue has overflowed */ + if (IX_OSAL_READ_LONG(qUOStatRegAddr) & overflowBitMask) + { + /* clear the overflow status bit if it was set */ + IX_OSAL_WRITE_LONG(qUOStatRegAddr, + (IX_OSAL_READ_LONG(qUOStatRegAddr) & + ~overflowBitMask)); + *qStatus |= IX_QMGR_Q_STATUS_OF_BIT_MASK; + } + + /* Check if the queue has underflowed */ + if (IX_OSAL_READ_LONG(qUOStatRegAddr) & underflowBitMask) + { + /* clear the underflow status bit if it was set */ + IX_OSAL_WRITE_LONG(qUOStatRegAddr, + (IX_OSAL_READ_LONG(qUOStatRegAddr) & + ~underflowBitMask)); + *qStatus |= IX_QMGR_Q_STATUS_UF_BIT_MASK; + } + } + else /* read status of a queue in the range 32-63 */ + { + extern UINT32 ixQMgrAqmIfQueUppStat0RegAddr; + extern UINT32 ixQMgrAqmIfQueUppStat1RegAddr; + extern UINT32 ixQMgrAqmIfQueUppStat0BitMask[]; + extern UINT32 ixQMgrAqmIfQueUppStat1BitMask[]; + + volatile UINT32 *qNearEmptyStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat0RegAddr; + volatile UINT32 *qFullStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat1RegAddr; + int maskIndex = qId - IX_QMGR_MIN_QUEUPP_QID; + UINT32 qNearEmptyStatBitMask = ixQMgrAqmIfQueUppStat0BitMask[maskIndex]; + UINT32 qFullStatBitMask = ixQMgrAqmIfQueUppStat1BitMask[maskIndex]; + + /* Reset the status bits */ + *qStatus = 0; + + /* Check if the queue is nearly empty */ + if (IX_OSAL_READ_LONG(qNearEmptyStatRegAddr) & qNearEmptyStatBitMask) + { + *qStatus |= IX_QMGR_Q_STATUS_NE_BIT_MASK; + } + + /* Check if the queue is full */ + if (IX_OSAL_READ_LONG(qFullStatRegAddr) & qFullStatBitMask) + { + *qStatus |= IX_QMGR_Q_STATUS_F_BIT_MASK; + } + } + return IX_SUCCESS; +} +#endif /* def NO_INLINE_APIS */ diff --git a/drivers/net/npe/IxQMgrQCfg.c b/drivers/net/npe/IxQMgrQCfg.c new file mode 100644 index 0000000000..ec7d837c38 --- /dev/null +++ b/drivers/net/npe/IxQMgrQCfg.c @@ -0,0 +1,543 @@ +/** + * @file QMgrQCfg.c + * + * @author Intel Corporation + * @date 30-Oct-2001 + * + * @brief This modules provides an interface for setting up the static + * configuration of AQM queues.This file contains the following + * functions: + * + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* + * System defined include files. + */ + +/* + * User defined include files. + */ +#include "IxOsal.h" +#include "IxQMgr.h" +#include "IxQMgrAqmIf_p.h" +#include "IxQMgrQCfg_p.h" +#include "IxQMgrDefines_p.h" + +/* + * #defines and macros used in this file. + */ + +#define IX_QMGR_MIN_ENTRY_SIZE_IN_WORDS 16 + +/* Total size of SRAM */ +#define IX_QMGR_AQM_SRAM_SIZE_IN_BYTES 0x4000 + +/* + * Check that qId is a valid queue identifier. This is provided to + * make the code easier to read. + */ +#define IX_QMGR_QID_IS_VALID(qId) \ +(((qId) >= (IX_QMGR_MIN_QID)) && ((qId) <= (IX_QMGR_MAX_QID))) + +/* + * Typedefs whose scope is limited to this file. + */ + +/* + * This struct describes an AQM queue. + * N.b. bufferSizeInWords and qEntrySizeInWords are stored in the queue + * as these are requested by Access in the data path. sizeInEntries is + * not required by the data path so it can be calculated dynamically. + * + */ +typedef struct +{ + char qName[IX_QMGR_MAX_QNAME_LEN+1]; /* Textual description of a queue*/ + IxQMgrQSizeInWords qSizeInWords; /* The number of words in the queue */ + IxQMgrQEntrySizeInWords qEntrySizeInWords; /* Number of words per queue entry*/ + BOOL isConfigured; /* This flag is TRUE if the queue has + * been configured + */ +} IxQMgrCfgQ; + +/* + * Variable declarations global to this file. Externs are followed by + * statics. + */ + +extern UINT32 * ixQMgrAqmIfQueAccRegAddr[]; + +/* Store data required to inline read and write access + */ +IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[IX_QMGR_MAX_NUM_QUEUES]; + +static IxQMgrCfgQ cfgQueueInfo[IX_QMGR_MAX_NUM_QUEUES]; + +/* This pointer holds the starting address of AQM SRAM not used by + * the AQM queues. + */ +static UINT32 freeSramAddress=0; + +/* 4 words of zeroed memory for inline access */ +static UINT32 zeroedPlaceHolder[4] = { 0, 0, 0, 0 }; + +static BOOL cfgInitialized = FALSE; + +static IxOsalMutex ixQMgrQCfgMutex; + +/* + * Statistics + */ +static IxQMgrQCfgStats stats; + +/* + * Function declarations + */ +PRIVATE BOOL +watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level); + +PRIVATE BOOL +qSizeInWordsIsOk (IxQMgrQSizeInWords qSize); + +PRIVATE BOOL +qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize); + +/* + * Function definitions. + */ +void +ixQMgrQCfgInit (void) +{ + int loopIndex; + + for (loopIndex=0; loopIndex < IX_QMGR_MAX_NUM_QUEUES;loopIndex++) + { + /* info for code inlining */ + ixQMgrAqmIfQueAccRegAddr[loopIndex] = zeroedPlaceHolder; + + /* info for code inlining */ + ixQMgrQInlinedReadWriteInfo[loopIndex].qReadCount = 0; + ixQMgrQInlinedReadWriteInfo[loopIndex].qWriteCount = 0; + ixQMgrQInlinedReadWriteInfo[loopIndex].qAccRegAddr = zeroedPlaceHolder; + ixQMgrQInlinedReadWriteInfo[loopIndex].qUOStatRegAddr = zeroedPlaceHolder; + ixQMgrQInlinedReadWriteInfo[loopIndex].qUflowStatBitMask = 0; + ixQMgrQInlinedReadWriteInfo[loopIndex].qOflowStatBitMask = 0; + ixQMgrQInlinedReadWriteInfo[loopIndex].qEntrySizeInWords = 0; + ixQMgrQInlinedReadWriteInfo[loopIndex].qSizeInEntries = 0; + ixQMgrQInlinedReadWriteInfo[loopIndex].qConfigRegAddr = zeroedPlaceHolder; + } + + /* Initialise the AqmIf component */ + ixQMgrAqmIfInit (); + + /* Reset all queues to have queue name = NULL, entry size = 0 and + * isConfigured = false + */ + for (loopIndex=0; loopIndex < IX_QMGR_MAX_NUM_QUEUES;loopIndex++) + { + strcpy (cfgQueueInfo[loopIndex].qName, ""); + cfgQueueInfo[loopIndex].qSizeInWords = 0; + cfgQueueInfo[loopIndex].qEntrySizeInWords = 0; + cfgQueueInfo[loopIndex].isConfigured = FALSE; + + /* Statistics */ + stats.qStats[loopIndex].isConfigured = FALSE; + stats.qStats[loopIndex].qName = cfgQueueInfo[loopIndex].qName; + } + + /* Statistics */ + stats.wmSetCnt = 0; + + ixQMgrAqmIfSramBaseAddressGet (&freeSramAddress); + + ixOsalMutexInit(&ixQMgrQCfgMutex); + + cfgInitialized = TRUE; +} + +void +ixQMgrQCfgUninit (void) +{ + cfgInitialized = FALSE; + + /* Uninitialise the AqmIf component */ + ixQMgrAqmIfUninit (); +} + +IX_STATUS +ixQMgrQConfig (char *qName, + IxQMgrQId qId, + IxQMgrQSizeInWords qSizeInWords, + IxQMgrQEntrySizeInWords qEntrySizeInWords) +{ + UINT32 aqmLocalBaseAddress; + + if (!cfgInitialized) + { + return IX_FAIL; + } + + if (!IX_QMGR_QID_IS_VALID(qId)) + { + return IX_QMGR_INVALID_Q_ID; + } + + else if (NULL == qName) + { + return IX_QMGR_PARAMETER_ERROR; + } + + else if (strlen (qName) > IX_QMGR_MAX_QNAME_LEN) + { + return IX_QMGR_PARAMETER_ERROR; + } + + else if (!qSizeInWordsIsOk (qSizeInWords)) + { + return IX_QMGR_INVALID_QSIZE; + } + + else if (!qEntrySizeInWordsIsOk (qEntrySizeInWords)) + { + return IX_QMGR_INVALID_Q_ENTRY_SIZE; + } + + else if (cfgQueueInfo[qId].isConfigured) + { + return IX_QMGR_Q_ALREADY_CONFIGURED; + } + + ixOsalMutexLock(&ixQMgrQCfgMutex, IX_OSAL_WAIT_FOREVER); + + /* Write the config register */ + ixQMgrAqmIfQueCfgWrite (qId, + qSizeInWords, + qEntrySizeInWords, + freeSramAddress); + + + strcpy (cfgQueueInfo[qId].qName, qName); + cfgQueueInfo[qId].qSizeInWords = qSizeInWords; + cfgQueueInfo[qId].qEntrySizeInWords = qEntrySizeInWords; + + /* store pre-computed information in the same cache line + * to facilitate inlining of QRead and QWrite functions + * in IxQMgr.h + */ + ixQMgrQInlinedReadWriteInfo[qId].qReadCount = 0; + ixQMgrQInlinedReadWriteInfo[qId].qWriteCount = 0; + ixQMgrQInlinedReadWriteInfo[qId].qEntrySizeInWords = qEntrySizeInWords; + ixQMgrQInlinedReadWriteInfo[qId].qSizeInEntries = + (UINT32)qSizeInWords / (UINT32)qEntrySizeInWords; + + /* Calculate the new freeSramAddress from the size of the queue + * currently being configured. + */ + freeSramAddress += (qSizeInWords * IX_QMGR_NUM_BYTES_PER_WORD); + + /* Get the virtual SRAM address */ + ixQMgrAqmIfBaseAddressGet (&aqmLocalBaseAddress); + + IX_OSAL_ASSERT((freeSramAddress - (aqmLocalBaseAddress + (IX_QMGR_QUEBUFFER_SPACE_OFFSET))) <= + IX_QMGR_QUE_BUFFER_SPACE_SIZE); + + /* The queue is now configured */ + cfgQueueInfo[qId].isConfigured = TRUE; + + ixOsalMutexUnlock(&ixQMgrQCfgMutex); + +#ifndef NDEBUG + /* Update statistics */ + stats.qStats[qId].isConfigured = TRUE; + stats.qStats[qId].qName = cfgQueueInfo[qId].qName; +#endif + return IX_SUCCESS; +} + +IxQMgrQSizeInWords +ixQMgrQSizeInWordsGet (IxQMgrQId qId) +{ + /* No parameter checking as this is used on the data path */ + return (cfgQueueInfo[qId].qSizeInWords); +} + +IX_STATUS +ixQMgrQSizeInEntriesGet (IxQMgrQId qId, + unsigned *qSizeInEntries) +{ + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if(NULL == qSizeInEntries) + { + return IX_QMGR_PARAMETER_ERROR; + } + + *qSizeInEntries = (UINT32)(cfgQueueInfo[qId].qSizeInWords) / + (UINT32)cfgQueueInfo[qId].qEntrySizeInWords; + + return IX_SUCCESS; +} + +IxQMgrQEntrySizeInWords +ixQMgrQEntrySizeInWordsGet (IxQMgrQId qId) +{ + /* No parameter checking as this is used on the data path */ + return (cfgQueueInfo[qId].qEntrySizeInWords); +} + +IX_STATUS +ixQMgrWatermarkSet (IxQMgrQId qId, + IxQMgrWMLevel ne, + IxQMgrWMLevel nf) +{ + IxQMgrQStatus qStatusOnEntry;/* The queue status on entry/exit */ + IxQMgrQStatus qStatusOnExit; /* to this function */ + + if (!ixQMgrQIsConfigured(qId)) + { + return IX_QMGR_Q_NOT_CONFIGURED; + } + + if (!watermarkLevelIsOk (qId, ne)) + { + return IX_QMGR_INVALID_Q_WM; + } + + if (!watermarkLevelIsOk (qId, nf)) + { + return IX_QMGR_INVALID_Q_WM; + } + + /* Get the current queue status */ + ixQMgrAqmIfQueStatRead (qId, &qStatusOnEntry); + +#ifndef NDEBUG + /* Update statistics */ + stats.wmSetCnt++; +#endif + + ixQMgrAqmIfWatermarkSet (qId, + ne, + nf); + + /* Get the current queue status */ + ixQMgrAqmIfQueStatRead (qId, &qStatusOnExit); + + /* If the status has changed return a warning */ + if (qStatusOnEntry != qStatusOnExit) + { + return IX_QMGR_WARNING; + } + + return IX_SUCCESS; +} + +IX_STATUS +ixQMgrAvailableSramAddressGet (UINT32 *address, + unsigned *sizeOfFreeRam) +{ + UINT32 aqmLocalBaseAddress; + + if ((NULL == address)||(NULL == sizeOfFreeRam)) + { + return IX_QMGR_PARAMETER_ERROR; + } + if (!cfgInitialized) + { + return IX_FAIL; + } + + *address = freeSramAddress; + + /* Get the virtual SRAM address */ + ixQMgrAqmIfBaseAddressGet (&aqmLocalBaseAddress); + + /* + * Calculate the size in bytes of free sram + * i.e. current free SRAM virtual pointer from + * (base + total size) + */ + *sizeOfFreeRam = + (aqmLocalBaseAddress + + IX_QMGR_AQM_SRAM_SIZE_IN_BYTES) - + freeSramAddress; + + if (0 == *sizeOfFreeRam) + { + return IX_QMGR_NO_AVAILABLE_SRAM; + } + + return IX_SUCCESS; +} + +BOOL +ixQMgrQIsConfigured (IxQMgrQId qId) +{ + if (!IX_QMGR_QID_IS_VALID(qId)) + { + return FALSE; + } + + return cfgQueueInfo[qId].isConfigured; +} + +IxQMgrQCfgStats* +ixQMgrQCfgStatsGet (void) +{ + return &stats; +} + +IxQMgrQCfgStats* +ixQMgrQCfgQStatsGet (IxQMgrQId qId) +{ + unsigned int ne; + unsigned int nf; + UINT32 baseAddress; + UINT32 readPtr; + UINT32 writePtr; + + stats.qStats[qId].qSizeInWords = cfgQueueInfo[qId].qSizeInWords; + stats.qStats[qId].qEntrySizeInWords = cfgQueueInfo[qId].qEntrySizeInWords; + + if (IX_SUCCESS != ixQMgrQNumEntriesGet (qId, &stats.qStats[qId].numEntries)) + { + if (IX_QMGR_WARNING != ixQMgrQNumEntriesGet (qId, &stats.qStats[qId].numEntries)) + { + IX_QMGR_LOG_WARNING1("Failed to get the number of entries in queue.... %d\n", qId); + } + } + + ixQMgrAqmIfQueCfgRead (qId, + stats.qStats[qId].numEntries, + &baseAddress, + &ne, + &nf, + &readPtr, + &writePtr); + + stats.qStats[qId].baseAddress = baseAddress; + stats.qStats[qId].ne = ne; + stats.qStats[qId].nf = nf; + stats.qStats[qId].readPtr = readPtr; + stats.qStats[qId].writePtr = writePtr; + + return &stats; +} + +/* + * Static function definitions + */ + +PRIVATE BOOL +watermarkLevelIsOk (IxQMgrQId qId, IxQMgrWMLevel level) +{ + unsigned qSizeInEntries; + + switch (level) + { + case IX_QMGR_Q_WM_LEVEL0: + case IX_QMGR_Q_WM_LEVEL1: + case IX_QMGR_Q_WM_LEVEL2: + case IX_QMGR_Q_WM_LEVEL4: + case IX_QMGR_Q_WM_LEVEL8: + case IX_QMGR_Q_WM_LEVEL16: + case IX_QMGR_Q_WM_LEVEL32: + case IX_QMGR_Q_WM_LEVEL64: + break; + default: + return FALSE; + } + + /* Check watermark is not bigger than the qSizeInEntries */ + ixQMgrQSizeInEntriesGet(qId, &qSizeInEntries); + + if ((unsigned)level > qSizeInEntries) + { + return FALSE; + } + + return TRUE; +} + +PRIVATE BOOL +qSizeInWordsIsOk (IxQMgrQSizeInWords qSize) +{ + BOOL status; + + switch (qSize) + { + case IX_QMGR_Q_SIZE16: + case IX_QMGR_Q_SIZE32: + case IX_QMGR_Q_SIZE64: + case IX_QMGR_Q_SIZE128: + status = TRUE; + break; + default: + status = FALSE; + break; + } + + return status; +} + +PRIVATE BOOL +qEntrySizeInWordsIsOk (IxQMgrQEntrySizeInWords entrySize) +{ + BOOL status; + + switch (entrySize) + { + case IX_QMGR_Q_ENTRY_SIZE1: + case IX_QMGR_Q_ENTRY_SIZE2: + case IX_QMGR_Q_ENTRY_SIZE4: + status = TRUE; + break; + default: + status = FALSE; + break; + } + + return status; +} diff --git a/drivers/net/npe/Makefile b/drivers/net/npe/Makefile new file mode 100644 index 0000000000..d13391bf94 --- /dev/null +++ b/drivers/net/npe/Makefile @@ -0,0 +1,99 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libnpe.o + +LOCAL_CFLAGS += -I$(TOPDIR)/drivers/net/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB -D__linux +CFLAGS += $(LOCAL_CFLAGS) +CPPFLAGS += $(LOCAL_CFLAGS) # needed for depend +HOSTCFLAGS += $(LOCAL_CFLAGS) + +COBJS-$(CONFIG_IXP4XX_NPE) := npe.o \ + miiphy.o \ + IxOsalBufferMgt.o \ + IxOsalIoMem.o \ + IxOsalOsCacheMMU.o \ + IxOsalOsMsgQ.o \ + IxOsalOsSemaphore.o \ + IxOsalOsServices.o \ + IxOsalOsThread.o \ + IxEthAcc.o \ + IxEthAccCommon.o \ + IxEthAccControlInterface.o \ + IxEthAccDataPlane.o \ + IxEthAccMac.o \ + IxEthAccMii.o \ + IxEthDBAPI.o \ + IxEthDBAPISupport.o \ + IxEthDBCore.o \ + IxEthDBEvents.o \ + IxEthDBFeatures.o \ + IxEthDBFirewall.o \ + IxEthDBHashtable.o \ + IxEthDBLearning.o \ + IxEthDBMem.o \ + IxEthDBNPEAdaptor.o \ + IxEthDBPortUpdate.o \ + IxEthDBReports.o \ + IxEthDBSearch.o \ + IxEthDBSpanningTree.o \ + IxEthDBUtil.o \ + IxEthDBVlan.o \ + IxEthDBWiFi.o \ + IxEthMii.o \ + IxQMgrAqmIf.o \ + IxQMgrDispatcher.o \ + IxQMgrInit.o \ + IxQMgrQAccess.o \ + IxQMgrQCfg.o \ + IxFeatureCtrl.o \ + IxNpeDl.o \ + IxNpeDlImageMgr.o \ + IxNpeDlNpeMgr.o \ + IxNpeDlNpeMgrUtils.o \ + IxNpeMh.o \ + IxNpeMhConfig.o \ + IxNpeMhReceive.o \ + IxNpeMhSend.o \ + IxNpeMhSolicitedCbMgr.o \ + IxNpeMhUnsolicitedCbMgr.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/net/npe/include/IxAssert.h b/drivers/net/npe/include/IxAssert.h new file mode 100644 index 0000000000..eae8b3f273 --- /dev/null +++ b/drivers/net/npe/include/IxAssert.h @@ -0,0 +1,71 @@ +/** + * @file IxAssert.h + * + * @date 21-MAR-2002 (replaced by OSAL) + * + * @brief This file contains assert and ensure macros used by the IXP400 software + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxAssert IXP400 Assertion Macros (IxAssert) API + * + * @brief Assertion support + * + * @{ + */ + +#ifndef IXASSERT_H + +#ifndef __doxygen_HIDE +#define IXASSERT_H +#endif /* __doxygen_HIDE */ + +#include "IxOsalBackward.h" + +#endif /* IXASSERT_H */ + +/** + * @} addtogroup IxAssert + */ + + + diff --git a/drivers/net/npe/include/IxAtmSch.h b/drivers/net/npe/include/IxAtmSch.h new file mode 100644 index 0000000000..73c3be29ab --- /dev/null +++ b/drivers/net/npe/include/IxAtmSch.h @@ -0,0 +1,504 @@ +/** + * @file IxAtmSch.h + * + * @date 23-NOV-2001 + * + * @brief Header file for the IXP400 ATM Traffic Shaper + * + * This component demonstrates an ATM Traffic Shaper implementation. It + * will perform shaping on upto 12 ports and total of 44 VCs accross all ports, + * 32 are intended for AAL0/5 and 12 for OAM (1 per port). + * The supported traffic types are;1 rt-VBR VC where PCR = SCR. + * (Effectively CBR) and Up-to 44 VBR VCs. + * + * This component models the ATM ports and VCs and is capable of producing + * a schedule of ATM cells per port which can be supplied to IxAtmdAcc + * for execution on the data path. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * + * @sa IxAtmm.h + * + */ + +/** + * @defgroup IxAtmSch IXP400 ATM Transmit Scheduler (IxAtmSch) API + * + * @brief IXP400 ATM scheduler component Public API + * + * @{ + */ + +#ifndef IXATMSCH_H +#define IXATMSCH_H + +#include "IxOsalTypes.h" +#include "IxAtmTypes.h" + +/* + * #defines and macros used in this file. + */ + +/* Return codes */ + +/** + * @ingroup IxAtmSch + * + * @def IX_ATMSCH_RET_NOT_ADMITTED + * @brief Indicates that CAC function has rejected VC registration due + * to insufficient line capacity. +*/ +#define IX_ATMSCH_RET_NOT_ADMITTED 2 + +/** + * @ingroup IxAtmSch + * + * @def IX_ATMSCH_RET_QUEUE_FULL + * @brief Indicates that the VC queue is full, no more demand can be + * queued at this time. + */ +#define IX_ATMSCH_RET_QUEUE_FULL 3 + +/** + * @ingroup IxAtmSch + * + * @def IX_ATMSCH_RET_QUEUE_EMPTY + * @brief Indicates that all VC queues on this port are empty and + * therefore there are no cells to be scheduled at this time. + */ +#define IX_ATMSCH_RET_QUEUE_EMPTY 4 + +/* + * Function declarations + */ + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchInit(void) + * + * @brief This function is used to initialize the ixAtmSch component. It + * should be called before any other IxAtmSch API function. + * + * @param None + * + * @return + * - <b>IX_SUCCESS :</b> indicates that + * -# The ATM scheduler component has been successfully initialized. + * -# The scheduler is ready to accept Port modelling requests. + * - <b>IX_FAIL :</b> Some internal error has prevented the scheduler component + * from initialising. + */ +PUBLIC IX_STATUS +ixAtmSchInit(void); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchPortModelInitialize( IxAtmLogicalPort port, + unsigned int portRate, + unsigned int minCellsToSchedule) + * + * @brief This function shall be called first to initialize an ATM port before + * any other ixAtmSch API calls may be made for that port. + * + * @param port @ref IxAtmLogicalPort [in] - The specific port to initialize. Valid + * values range from 0 to IX_UTOPIA_MAX_PORTS - 1, representing a + * maximum of IX_UTOPIA_MAX_PORTS possible ports. + * + * @param portRate unsigned int [in] - Value indicating the upstream capacity + * of the indicated port. The value should be supplied in + * units of ATM (53 bytes) cells per second. + * A port rate of 800Kbits/s is the equivalent + * of 1886 cells per second + * + * @param minCellsToSchedule unsigned int [in] - This parameter specifies the minimum + * number of cells which the scheduler will put in a schedule + * table for this port. This value sets the worst case CDVT for VCs + * on this port i.e. CDVT = 1*minCellsToSchedule/portRate. + * @return + * - <b>IX_SUCCESS :</b> indicates that + * -# The ATM scheduler has been successfully initialized. + * -# The requested port model has been established. + * -# The scheduler is ready to accept VC modelling requests + * on the ATM port. + * - <b>IX_FAIL :</b> indicates the requested port could not be + * initialized. */ +PUBLIC IX_STATUS +ixAtmSchPortModelInitialize( IxAtmLogicalPort port, + unsigned int portRate, + unsigned int minCellsToSchedule); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchPortRateModify( IxAtmLogicalPort port, + unsigned int portRate) + * + * @brief This function is called to modify the portRate on a + * previously initialized port, typically in the event that + * the line condition of the port changes. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port which is to be + * modified. + * + * @param portRate unsigned int [in] - Value indicating the new upstream + * capacity for this port in cells/second. + * A port rate of 800Kbits/s is the equivalent + * of 1886 cells per second + * + * @return + * - <b>IX_SUCCESS :</b> The port rate has been successfully modified.<br> + * - <b>IX_FAIL :</b> The port rate could not be modified, either + * because the input data was invalid, or the new port rate is + * insufficient to support established ATM VC contracts on this + * port. + * + * @warning The IxAtmSch component will validate the supplied port + * rate is sufficient to support all established VC + * contracts on the port. If the new port rate is + * insufficient to support all established contracts then + * the request to modify the port rate will be rejected. + * In this event, the user is expected to remove + * established contracts using the ixAtmSchVcModelRemove + * interface and then retry this interface. + * + * @sa ixAtmSchVcModelRemove() */ +PUBLIC IX_STATUS +ixAtmSchPortRateModify( IxAtmLogicalPort port, + unsigned int portRate); + + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchVcModelSetup( IxAtmLogicalPort port, + IxAtmTrafficDescriptor *trafficDesc, + IxAtmSchedulerVcId *vcId) + * + * @brief A client calls this interface to set up an upstream + * (transmitting) virtual connection model (VC) on the + * specified ATM port. This function also provides the + * virtual * connection admission control (CAC) service to the + * client. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream + * VC is to be established. + * + * @param *trafficDesc @ref IxAtmTrafficDescriptor [in] - Pointer to a structure + * describing the requested traffic contract of the VC to be + * established. This structure contains the typical ATM + * traffic descriptor values (e.g. PCR, SCR, MBS, CDVT, etc.) + * defined by the ATM standard. + * + * @param *vcId @ref IxAtmSchedulerVcId [out] - This value will be filled with the + * port-unique identifier for this virtual connection. A + * valid identification is a non-negative number. + * + * @return + * - <b>IX_SUCCESS :</b> The VC has been successfully established on + * this port. The client may begin to submit demand on this VC. + * - <b>IX_ATMSCH_RET_NOT_ADMITTED :</b> The VC cannot be established + * on this port because there is insufficient upstream capacity + * available to support the requested traffic contract descriptor + * - <b>IX_FAIL :</b>Input data are invalid. VC has not been + * established. + */ +PUBLIC IX_STATUS +ixAtmSchVcModelSetup( IxAtmLogicalPort port, + IxAtmTrafficDescriptor *trafficDesc, + IxAtmSchedulerVcId *vcId); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchVcConnIdSet( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId, + IxAtmConnId vcUserConnId) + * + * @brief A client calls this interface to set the vcUserConnId for a VC on + * the specified ATM port. This vcUserConnId will default to + * IX_ATM_IDLE_CELLS_CONNID if this function is not called for a VC. + * Hence if the client does not call this function for a VC then only idle + * cells will be scheduled for this VC. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the upstream + * VC is has been established. + * + * @param vcId @ref IxAtmSchedulerVcId [in] - This is the unique identifier for this virtual + * connection. A valid identification is a non-negative number and is + * all ports. + * + * @param vcUserConnId @ref IxAtmConnId [in] - The connId is used to refer to a VC in schedule + * table entries. It is treated as the Id by which the scheduler client + * knows the VC. It is used in any communicatations from the Scheduler + * to the scheduler user e.g. schedule table entries. + * + * @return + * - <b>IX_SUCCESS :</b> The id has successfully been set. + * - <b>IX_FAIL :</b>Input data are invalid. connId id is not established. + */ +PUBLIC IX_STATUS +ixAtmSchVcConnIdSet( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId, + IxAtmConnId vcUserConnId); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchVcModelRemove( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId) + * + * @brief Interface called by the client to remove a previously + * established VC on a particular port. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be + * removed is established. + * + * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be removed. This is the + * value returned by the @ref ixAtmSchVcModelSetup call which + * established the relevant VC. + * + * @return + * - <b>IX_SUCCESS :</b> The VC has been successfully removed from + * this port. It is no longer modelled on this port. + * - <b>IX_FAIL :</b>Input data are invalid. The VC is still being modeled + * by the traffic shaper. + * + * @sa ixAtmSchVcModelSetup() + */ +PUBLIC IX_STATUS +ixAtmSchVcModelRemove( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchVcQueueUpdate( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId, + unsigned int numberOfCells) + * + * @brief The client calls this function to notify IxAtmSch that the + * user of a VC has submitted cells for transmission. + * + * This information is stored, aggregated from a number of calls to + * ixAtmSchVcQueueUpdate and eventually used in the call to + * ixAtmSchTableUpdate. + * + * Normally IxAtmSch will update the VC queue by adding the number of + * cells to the current queue length. However, if IxAtmSch + * determines that the user has over-submitted for the VC and + * exceeded its transmission quota the queue request can be rejected. + * The user should resubmit the request later when the queue has been + * depleted. + * + * This implementation of ixAtmSchVcQueueUpdate uses no operating + * system or external facilities, either directly or indirectly. + * This allows clients to call this function form within an interrupt handler. + * + * This interface is structurally compatible with the + * IxAtmdAccSchQueueUpdate callback type definition required for + * IXP400 ATM scheduler interoperability. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be + * updated is established. + * + * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be updated. This is the + * value returned by the @ref ixAtmSchVcModelSetup call which + * established the relevant VC. + * + * @param numberOfCells unsigned int [in] - Indicates how many ATM cells should + * be added to the queue for this VC. + * + * @return + * - <b>IX_SUCCESS :</b> The VC queue has been successfully updated. + * - <b>IX_ATMSCH_RET_QUEUE_FULL :</b> The VC queue has reached a + * preset limit. This indicates the client has over-submitted + * and exceeded its transmission quota. The request is + * rejected. The VC queue is not updated. The VC user is + * advised to resubmit the request later. + * - <b>IX_FAIL :</b> The input are invalid. No VC queue is updated. + * + * @warning IxAtmSch assumes that the calling software ensures that + * calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and + * ixAtmSchTableUpdate are both self and mutually exclusive + * for the same port. + * + * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate(). */ +PUBLIC IX_STATUS +ixAtmSchVcQueueUpdate( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId, + unsigned int numberOfCells); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchVcQueueClear( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId) + * + * @brief The client calls this function to remove all currently + * queued cells from a registered VC. The pending cell count + * for the specified VC is reset to zero. + * + * This interface is structurally compatible with the + * IxAtmdAccSchQueueClear callback type definition required for + * IXP400 ATM scheduler interoperability. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be + * cleared is established. + * + * @param vcId @ref IxAtmSchedulerVcId [in] - Identifies the VC to be cleared. This is the + * value returned by the @ref ixAtmSchVcModelSetup call which + * established the relevant VC. + * + * @return + * - <b>IX_SUCCESS :</b> The VC queue has been successfully cleared. + * - <b>IX_FAIL :</b> The input are invalid. No VC queue is modified. + * + * @warning IxAtmSch assumes that the calling software ensures that + * calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and + * ixAtmSchTableUpdate are both self and mutually exclusive + * for the same port. + * + * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate(). */ +PUBLIC IX_STATUS +ixAtmSchVcQueueClear( IxAtmLogicalPort port, + IxAtmSchedulerVcId vcId); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchTableUpdate( IxAtmLogicalPort port, + unsigned int maxCells, + IxAtmScheduleTable **rettable) + * + * @brief The client calls this function to request an update of the + * schedule table for a particular ATM port. + * + * This is called when the client decides it needs a new sequence of + * cells to send (probably because the transmit queue is near to + * empty for this ATM port). The scheduler will use its stored + * information on the cells submitted for transmit (i.e. data + * supplied via @ref ixAtmSchVcQueueUpdate function) with the traffic + * descriptor information of all established VCs on the ATM port to + * decide the sequence of cells to be sent and fill the schedule + * table for a period of time into the future. + * + * IxAtmSch will guarantee a minimum of minCellsToSchedule if there + * is at least one cell ready to send. If there are no cells then + * IX_ATMSCH_RET_QUEUE_EMPTY is returned. + * + * This implementation of ixAtmSchTableUpdate uses no operating + * system or external facilities, either directly or indirectly. + * This allows clients to call this function form within an FIQ + * interrupt handler. + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port for which requested + * schedule table is to be generated. + * + * @param maxCells unsigned [in] - Specifies the maximum number of cells + * that must be scheduled in the supplied table during any + * call to the interface. + * + * @param **table @ref IxAtmScheduleTable [out] - A pointer to an area of + * storage is returned which contains the generated + * schedule table. The client should not modify the + * contents of this table. + * + * @return + * - <b>IX_SUCCESS :</b> The schedule table has been published. + * Currently there is at least one VC queue that is nonempty. + * - <b>IX_ATMSCH_RET_QUEUE_EMPTY :</b> Currently all VC queues on + * this port are empty. The schedule table returned is set to + * NULL. The client is not expected to invoke this function + * again until more cells have been submitted on this port + * through the @ref ixAtmSchVcQueueUpdate function. + * - <b>IX_FAIL :</b> The input are invalid. No action is taken. + * + * @warning IxAtmSch assumes that the calling software ensures that + * calls to ixAtmSchVcQueueUpdate, ixAtmSchVcQueueClear and + * ixAtmSchTableUpdate are both self and mutually exclusive + * for the same port. + * + * @warning Subsequent calls to this function for the same port will + * overwrite the contents of previously supplied schedule + * tables. The client must be completely finished with the + * previously supplied schedule table before calling this + * function again for the same port. + * + * @sa ixAtmSchVcQueueUpdate(), ixAtmSchVcQueueClear(), ixAtmSchTableUpdate(). */ +PUBLIC IX_STATUS +ixAtmSchTableUpdate( IxAtmLogicalPort port, + unsigned int maxCells, + IxAtmScheduleTable **rettable); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchShow(void) + * + * @brief Utility function which will print statistics on the current + * and accumulated state of VCs and traffic in the ATM + * scheduler component. Output is sent to the default output + * device. + * + * @param none + * @return none + */ +PUBLIC void +ixAtmSchShow(void); + +/** + * @ingroup IxAtmSch + * + * @fn ixAtmSchStatsClear(void) + * + * @brief Utility function which will reset all counter statistics in + * the ATM scheduler to zero. + * + * @param none + * @return none + */ +PUBLIC void +ixAtmSchStatsClear(void); + +#endif +/* IXATMSCH_H */ + +/** @} */ diff --git a/drivers/net/npe/include/IxAtmTypes.h b/drivers/net/npe/include/IxAtmTypes.h new file mode 100644 index 0000000000..8624c3328e --- /dev/null +++ b/drivers/net/npe/include/IxAtmTypes.h @@ -0,0 +1,409 @@ +/** + * @file IxAtmTypes.h + * + * @date 24-MAR-2002 + * + * @brief This file contains Atm types common to a number of Atm components. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* ------------------------------------------------------ + Doxygen group definitions + ------------------------------------------------------ */ +/** + * @defgroup IxAtmTypes IXP400 ATM Types (IxAtmTypes) + * + * @brief The common set of types used in many Atm components + * + * @{ */ + +#ifndef IXATMTYPES_H +#define IXATMTYPES_H + +#include "IxNpeA.h" + +/** + * @enum IxAtmLogicalPort + * + * @brief Logical Port Definitions : + * + * Only 1 port is available in SPHY configuration + * 12 ports are enabled in MPHY configuration + * + */ +typedef enum +{ + IX_UTOPIA_PORT_0 = 0, /**< Port 0 */ +#ifdef IX_NPE_MPHYMULTIPORT + IX_UTOPIA_PORT_1, /**< Port 1 */ + IX_UTOPIA_PORT_2, /**< Port 2 */ + IX_UTOPIA_PORT_3, /**< Port 3 */ + IX_UTOPIA_PORT_4, /**< Port 4 */ + IX_UTOPIA_PORT_5, /**< Port 5 */ + IX_UTOPIA_PORT_6, /**< Port 6 */ + IX_UTOPIA_PORT_7, /**< Port 7 */ + IX_UTOPIA_PORT_8, /**< Port 8 */ + IX_UTOPIA_PORT_9, /**< Port 9 */ + IX_UTOPIA_PORT_10, /**< Port 10 */ + IX_UTOPIA_PORT_11, /**< Port 11 */ +#endif /* IX_NPE_MPHY */ + IX_UTOPIA_MAX_PORTS /**< Not a port - just a definition for the + * maximum possible ports + */ +} IxAtmLogicalPort; + +/** + * @def IX_ATM_CELL_PAYLOAD_SIZE + * @brief Size of a ATM cell payload + */ +#define IX_ATM_CELL_PAYLOAD_SIZE (48) + +/** + * @def IX_ATM_CELL_SIZE + * @brief Size of a ATM cell, including header + */ +#define IX_ATM_CELL_SIZE (53) + +/** + * @def IX_ATM_CELL_SIZE_NO_HEC + * @brief Size of a ATM cell, excluding HEC byte + */ +#define IX_ATM_CELL_SIZE_NO_HEC (IX_ATM_CELL_SIZE - 1) + +/** + * @def IX_ATM_OAM_CELL_SIZE_NO_HEC + * @brief Size of a OAM cell, excluding HEC byte + */ +#define IX_ATM_OAM_CELL_SIZE_NO_HEC IX_ATM_CELL_SIZE_NO_HEC + +/** + * @def IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE + * @brief Size of a AAL0 48 Cell payload + */ +#define IX_ATM_AAL0_48_CELL_PAYLOAD_SIZE IX_ATM_CELL_PAYLOAD_SIZE + +/** + * @def IX_ATM_AAL5_CELL_PAYLOAD_SIZE + * @brief Size of a AAL5 Cell payload + */ +#define IX_ATM_AAL5_CELL_PAYLOAD_SIZE IX_ATM_CELL_PAYLOAD_SIZE + +/** + * @def IX_ATM_AAL0_52_CELL_SIZE_NO_HEC + * @brief Size of a AAL0 52 Cell, excluding HEC byte + */ +#define IX_ATM_AAL0_52_CELL_SIZE_NO_HEC IX_ATM_CELL_SIZE_NO_HEC + + +/** + * @def IX_ATM_MAX_VPI + * @brief Maximum value of an ATM VPI + */ +#define IX_ATM_MAX_VPI 255 + +/** + * @def IX_ATM_MAX_VCI + * @brief Maximum value of an ATM VCI + */ +#define IX_ATM_MAX_VCI 65535 + + /** + * @def IX_ATM_MAX_NUM_AAL_VCS + * @brief Maximum number of active AAL5/AAL0 VCs in the system + */ +#define IX_ATM_MAX_NUM_AAL_VCS 32 + +/** + * @def IX_ATM_MAX_NUM_VC + * @brief Maximum number of active AAL5/AAL0 VCs in the system + * The use of this macro is depreciated, it is retained for + * backward compatiblity. For current software release + * and beyond the define IX_ATM_MAX_NUM_AAL_VC should be used. + */ +#define IX_ATM_MAX_NUM_VC IX_ATM_MAX_NUM_AAL_VCS + + + +/** + * @def IX_ATM_MAX_NUM_OAM_TX_VCS + * @brief Maximum number of active OAM Tx VCs in the system, + * 1 OAM VC per port + */ +#define IX_ATM_MAX_NUM_OAM_TX_VCS IX_UTOPIA_MAX_PORTS + +/** + * @def IX_ATM_MAX_NUM_OAM_RX_VCS + * @brief Maximum number of active OAM Rx VCs in the system, + * 1 OAM VC shared accross all ports + */ +#define IX_ATM_MAX_NUM_OAM_RX_VCS 1 + +/** + * @def IX_ATM_MAX_NUM_AAL_OAM_TX_VCS + * @brief Maximum number of active AAL5/AAL0/OAM Tx VCs in the system + */ +#define IX_ATM_MAX_NUM_AAL_OAM_TX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_TX_VCS) + +/** + * @def IX_ATM_MAX_NUM_AAL_OAM_RX_VCS + * @brief Maximum number of active AAL5/AAL0/OAM Rx VCs in the system + */ +#define IX_ATM_MAX_NUM_AAL_OAM_RX_VCS (IX_ATM_MAX_NUM_AAL_VCS + IX_ATM_MAX_NUM_OAM_RX_VCS) + +/** + * @def IX_ATM_IDLE_CELLS_CONNID + * @brief VC Id used to indicate idle cells in the returned schedule table. + */ +#define IX_ATM_IDLE_CELLS_CONNID 0 + + +/** + * @def IX_ATM_CELL_HEADER_VCI_GET + * @brief get the VCI field from a cell header + */ +#define IX_ATM_CELL_HEADER_VCI_GET(cellHeader) \ + (((cellHeader) >> 4) & IX_OAM_VCI_BITS_MASK); + +/** + * @def IX_ATM_CELL_HEADER_VPI_GET + * @brief get the VPI field from a cell header + */ +#define IX_ATM_CELL_HEADER_VPI_GET(cellHeader) \ + (((cellHeader) >> 20) & IX_OAM_VPI_BITS_MASK); + +/** + * @def IX_ATM_CELL_HEADER_PTI_GET + * @brief get the PTI field from a cell header + */ +#define IX_ATM_CELL_HEADER_PTI_GET(cellHeader) \ + ((cellHeader) >> 1) & IX_OAM_PTI_BITS_MASK; + +/** + * @typedef IxAtmCellHeader + * + * @brief ATM Cell Header, does not contain 4 byte HEC, added by NPE-A + */ +typedef unsigned int IxAtmCellHeader; + + +/** + * @enum IxAtmServiceCategory + * + * @brief Enumerated type representing available ATM service categories. + * For more informatoin on these categories, see "Traffic Management + * Specification" v4.1, published by the ATM Forum - + * http://www.atmforum.com + */ +typedef enum +{ + IX_ATM_CBR, /**< Constant Bit Rate */ + IX_ATM_RTVBR, /**< Real Time Variable Bit Rate */ + IX_ATM_VBR, /**< Variable Bit Rate */ + IX_ATM_UBR, /**< Unspecified Bit Rate */ + IX_ATM_ABR /**< Available Bit Rate (not supported) */ + +} IxAtmServiceCategory; + +/** + * + * @enum IxAtmRxQueueId + * + * @brief Rx Queue Type for RX traffic + * + * IxAtmRxQueueId defines the queues involved for receiving data. + * + * There are two queues to facilitate prioritisation handling + * and processing the 2 queues with different algorithms and + * constraints + * + * e.g. : one queue can carry voice (or time-critical traffic), the + * other queue can carry non-voice traffic + * + */ +typedef enum +{ + IX_ATM_RX_A = 0, /**< RX queue A */ + IX_ATM_RX_B, /**< RX queue B */ + IX_ATM_MAX_RX_STREAMS /**< Maximum number of RX streams */ +} IxAtmRxQueueId; + +/** + * @brief Structure describing an ATM traffic contract for a Virtual + * Connection (VC). + * + * Structure is used to specify the requested traffic contract for a + * VC to the IxAtmSch component using the @ref ixAtmSchVcModelSetup + * interface. + * + * These parameters are defined by the ATM forum working group + * (http://www.atmforum.com). + * + * @note Typical values for a voice channel 64 Kbit/s + * - atmService @a IX_ATM_RTVBR + * - pcr 400 (include IP overhead, and AAL5 trailer) + * - cdvt 5000000 (5 ms) + * - scr = pcr + * + * @note Typical values for a data channel 800 Kbit/s + * - atmService @a IX_ATM_UBR + * - pcr 1962 (include IP overhead, and AAL5 trailer) + * - cdvt 5000000 (5 ms) + * + */ +typedef struct +{ + IxAtmServiceCategory atmService; /**< ATM service category */ + unsigned pcr; /**< Peak Cell Rate - cells per second */ + unsigned cdvt; /**< Cell Delay Variation Tolerance - in nanoseconds */ + unsigned scr; /**< Sustained Cell Rate - cells per second */ + unsigned mbs; /**< Max Burst Size - cells */ + unsigned mcr; /**< Minimum Cell Rate - cells per second */ + unsigned mfs; /**< Max Frame Size - cells */ +} IxAtmTrafficDescriptor; + +/** + * @typedef IxAtmConnId + * + * @brief ATM VC data connection identifier. + * + * This is is generated by IxAtmdAcc when a successful connection is + * made on a VC. The is the ID by which IxAtmdAcc knows an active + * VC and should be used in IxAtmdAcc API calls to reference a + * specific VC. + */ +typedef unsigned int IxAtmConnId; + +/** + * @typedef IxAtmSchedulerVcId + * + * @brief ATM VC scheduling connection identifier. + * + * This id is generated and used by ATM Tx controller, generally + * the traffic shaper (e.g. IxAtmSch). The IxAtmdAcc component + * will request one of these Ids whenever a data connection on + * a Tx VC is requested. This ID will be used in callbacks to + * the ATM Transmission Ctrl s/w (e.g. IxAtmm) to reference a + * particular VC. + */ +typedef int IxAtmSchedulerVcId; + +/** + * @typedef IxAtmNpeRxVcId + * + * @brief ATM Rx VC identifier used by the ATM Npe. + * + * This Id is generated by IxAtmdAcc when a successful data connection + * is made on a rx VC. + */ +typedef unsigned int IxAtmNpeRxVcId; + +/** + * @brief ATM Schedule Table entry + * + * This IxAtmScheduleTableEntry is used by an ATM scheduler to inform + * IxAtmdAcc about the data to transmit (in term of cells per VC) + * + * This structure defines + * @li the number of cells to be transmitted (numberOfCells) + * @li the VC connection to be used for transmission (connId). + * + * @note - When the connection Id value is IX_ATM_IDLE_CELLS_CONNID, the + * corresponding number of idle cells will be transmitted to the hardware. + * + */ +typedef struct +{ + IxAtmConnId connId; /**< connection Id + * + * Identifier of VC from which cells are to be transmitted. + * When this valus is IX_ATM_IDLE_CELLS_CONNID, this indicates + * that the system should transmit the specified number + * of idle cells. Unknown connIds result in the transmission + * idle cells. + */ + unsigned int numberOfCells; /**< number of cells to transmit + * + * The number of contiguous cells to schedule from this VC + * at this point. The valid range is from 1 to + * @a IX_ATM_SCHEDULETABLE_MAXCELLS_PER_ENTRY. This + * number can swap over mbufs and pdus. OverSchduling results + * in the transmission of idle cells. + */ +} IxAtmScheduleTableEntry; + +/** + * @brief This structure defines a schedule table which gives details + * on which data (from which VCs) should be transmitted for a + * forthcoming period of time for a particular port and the + * order in which that data should be transmitted. + * + * The schedule table consists of a series of entries each of which + * will schedule one or more cells from a particular registered VC. + * The total number of cells scheduled and the total number of + * entries in the table are also indicated. + * + */ +typedef struct +{ + unsigned tableSize; /**< Number of entries + * + * Indicates the total number of + * entries in the table. + */ + unsigned totalCellSlots; /**< Number of cells + * + * Indicates the total number of ATM + * cells which are scheduled by all the + * entries in the table. + */ + IxAtmScheduleTableEntry *table; /**< Pointer to schedule entries + * + * Pointer to an array + * containing tableSize entries + */ +} IxAtmScheduleTable; + +#endif /* IXATMTYPES_H */ + +/** + * @} defgroup IxAtmTypes + */ + + diff --git a/drivers/net/npe/include/IxAtmdAcc.h b/drivers/net/npe/include/IxAtmdAcc.h new file mode 100644 index 0000000000..ae7b2434c3 --- /dev/null +++ b/drivers/net/npe/include/IxAtmdAcc.h @@ -0,0 +1,1194 @@ + +/** + * @file IxAtmdAcc.h + * + * @date 07-Nov-2001 + * + * @brief IxAtmdAcc Public API + * + * This file contains the public API of IxAtmdAcc, related to the + * data functions of the component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* ------------------------------------------------------ + Doxygen group definitions + ------------------------------------------------------ */ + +/** + * + * @defgroup IxAtmdAccAPI IXP400 ATM Driver Access (IxAtmdAcc) API + * + * @brief The public API for the IXP400 Atm Driver Data component + * + * IxAtmdAcc is the low level interface by which AAL0/AAL5 and + * OAM data gets transmitted to,and received from the Utopia bus. + * + * For AAL0/AAL5 services transmit and receive connections may + * be established independantly for unique combinations of + * port,VPI,and VCI. + * + * Two AAL0 services supporting 48 or 52 byte cell data are provided. + * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52). + * AAL0_52 is a raw cell service the client must format + * the PDU with an ATM cell header (excluding HEC) at the start of + * each cell, note that AtmdAcc does not validate the cell headers in + * a submitted PDU. + * + * OAM cells cannot be received over the AAL0 service but instead + * are received over a dedicated OAM service. + * + * For the OAM service an "OAM Tx channel" may be enabled for a port + * by establishing a single dedicated OAM Tx connection on that port. + * A single "OAM Rx channel" for all ports may be enabled by + * establishing a dedicated OAM Rx connection. + * + * The OAM service allows buffers containing 52 byte OAM F4/F5 cells + * to be transmitted and received over the dedicated OAM channels. + * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM + * service offered by AtmdAcc is a raw cell transport service. + * It is assumed that ITU I.610 procedures that make use of this + * service are implemented above AtmdAcc. + * + * Note that the dedicated OAM connections are established on + * reserved VPI,VCI, and (in the case of Rx) port values defined below. + * These values are used purely to descriminate the dedicated OAM channels + * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be + * realised for particluar VPI/VCIs by manipulating the VPI,VCI + * fields of the ATM cell headers of cells in the buffers passed + * to AtmdAcc. Note that AtmdAcc does not validate the cell headers + * in a submitted OAM PDU. + * + * + * + * This part is related to the User datapath processing + * + * @{ + */ + +#ifndef IXATMDACC_H +#define IXATMDACC_H + +#include "IxAtmTypes.h" + +/* ------------------------------------------------------ + AtmdAcc Data Types definition + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_WARNING + * + * @brief Warning return code + * + * This constant is used to tell IxAtmDAcc user about a special case. + * + */ +#define IX_ATMDACC_WARNING 2 + +/** + * + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_BUSY + * + * @brief Busy return code + * + * This constant is used to tell IxAtmDAcc user that the request + * is correct, but cannot be processed because the IxAtmAcc resources + * are already used. The user has to retry its request later + * + */ +#define IX_ATMDACC_BUSY 3 + +/** + * + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_RESOURCES_STILL_ALLOCATED + * + * @brief Disconnect return code + * + * This constant is used to tell IxAtmDAcc user that the disconnect + * functions are not complete because the resources used by the driver + * are not yet released. The user has to retry the disconnect call + * later. + * + */ +#define IX_ATMDACC_RESOURCES_STILL_ALLOCATED 4 + +/** + * + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_DEFAULT_REPLENISH_COUNT + * + * @brief Default resources usage for RxVcFree replenish mechanism + * + * This constant is used to tell IxAtmDAcc to allocate and use + * the minimum of resources for rx free replenish. + * + * @sa ixAtmdAccRxVcConnect + */ +#define IX_ATMDACC_DEFAULT_REPLENISH_COUNT 0 + + +/** + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_OAM_TX_VPI + * + * @brief The reserved value used for the dedicated OAM + * Tx connection. This "well known" value is used by atmdAcc and + * its clients to dsicriminate the OAM channel, and should be chosen so + * that it does not coencide with the VPI value used in an AAL0/AAL5 connection. + * Any attempt to connect a service type other than OAM on this VPI will fail. + * + * + */ +#define IX_ATMDACC_OAM_TX_VPI 0 + +/** + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_OAM_TX_VCI + * + * @brief The reserved value used for the dedicated OAM + * Tx connection. This "well known" value is used by atmdAcc and + * its clients to dsicriminate the OAM channel, and should be chosen so + * that it does not coencide with the VCI value used in an AAL0/AAL5 connection. + * Any attempt to connect a service type other than OAM on this VCI will fail. + */ +#define IX_ATMDACC_OAM_TX_VCI 0 + + + /** + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_OAM_RX_PORT + * + * @brief The reserved dummy PORT used for all dedicated OAM + * Rx connections. Note that this is not a real port but must + * have a value that lies within the valid range of port values. + */ +#define IX_ATMDACC_OAM_RX_PORT IX_UTOPIA_PORT_0 + + /** + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_OAM_RX_VPI + * + * @brief The reserved value value used for the dedicated OAM + * Rx connection. This value should be chosen so that it does not + * coencide with the VPI value used in an AAL0/AAL5 connection. + * Any attempt to connect a service type other than OAM on this VPI will fail. + */ +#define IX_ATMDACC_OAM_RX_VPI 0 + +/** + * @ingroup IxAtmdAccAPI + * + * @def IX_ATMDACC_OAM_RX_VCI + * + * @brief The reserved value value used for the dedicated OAM + * Rx connection. This value should be chosen so that it does not + * coencide with the VCI value used in an AAL0/AAL5 connection. + * Any attempt to connect a service type other than OAM on this VCI will fail. + */ +#define IX_ATMDACC_OAM_RX_VCI 0 + + +/** + * @enum IxAtmdAccPduStatus + * + * @ingroup IxAtmdAccAPI + * + * @brief IxAtmdAcc Pdu status : + * + * IxAtmdAccPduStatus is used during a RX operation to indicate + * the status of the received PDU + * + */ + +typedef enum +{ + IX_ATMDACC_AAL0_VALID = 0, /**< aal0 pdu */ + IX_ATMDACC_OAM_VALID, /**< OAM pdu */ + IX_ATMDACC_AAL2_VALID, /**< aal2 pdu @b reserved for future use */ + IX_ATMDACC_AAL5_VALID, /**< aal5 pdu complete and trailer is valid */ + IX_ATMDACC_AAL5_PARTIAL, /**< aal5 pdu not complete, trailer is missing */ + IX_ATMDACC_AAL5_CRC_ERROR, /**< aal5 pdu not complete, crc error/length error */ + IX_ATMDACC_MBUF_RETURN /**< empty buffer returned to the user */ +} IxAtmdAccPduStatus; + + +/** + * + * @enum IxAtmdAccAalType + * + * @ingroup IxAtmdAccAPI + * + * @brief IxAtmdAcc AAL Service Type : + * + * IxAtmdAccAalType defines the type of traffic to run on this VC + * + */ +typedef enum +{ + IX_ATMDACC_AAL5, /**< ITU-T AAL5 */ + IX_ATMDACC_AAL2, /**< ITU-T AAL2 @b reserved for future use */ + IX_ATMDACC_AAL0_48, /**< AAL0 48 byte payloads (cell header is added by NPE)*/ + IX_ATMDACC_AAL0_52, /**< AAL0 52 byte cell data (HEC is added by NPE) */ + IX_ATMDACC_OAM, /**< OAM cell transport service (HEC is added by NPE)*/ + IX_ATMDACC_MAX_SERVICE_TYPE /**< not a service, used for parameter validation */ +} IxAtmdAccAalType; + +/** + * + * @enum IxAtmdAccClpStatus + * + * @ingroup IxAtmdAccAPI + * + * @brief IxAtmdAcc CLP indication + * + * IxAtmdAccClpStatus defines the CLP status of the current PDU + * + */ +typedef enum +{ + IX_ATMDACC_CLP_NOT_SET = 0, /**< CLP indication is not set */ + IX_ATMDACC_CLP_SET = 1 /**< CLP indication is set */ +} IxAtmdAccClpStatus; + +/** + * @typedef IxAtmdAccUserId + * + * @ingroup IxAtmdAccAPI + * + * @brief User-supplied Id + * + * IxAtmdAccUserId is passed through callbacks and allows the + * IxAtmdAcc user to identify the source of a call back. The range of + * this user-owned Id is [0...2^32-1)]. + * + * The user provides this own Ids on a per-channel basis as a parameter + * in a call to @a ixAtmdAccRxVcConnect() or @a ixAtmdAccRxVcConnect() + * + * @sa ixAtmdAccRxVcConnect + * @sa ixAtmdAccTxVcConnect + * + */ +typedef unsigned int IxAtmdAccUserId; + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to RX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccAPI + * + * @brief Rx callback prototype + * + * IxAtmdAccRxVcRxCallback is the prototype of the Rx callback user + * function called once per PDU to pass a receive Pdu to a user on a + * partilcular connection. The callback is likely to push the mbufs + * to a protocol layer, and recycle the mbufs for a further use. + * + * @note -This function is called ONLY in the context of + * the @a ixAtmdAccRxDispatch() function + * + * @sa ixAtmdAccRxDispatch + * @sa ixAtmdAccRxVcConnect + * + * @param port @ref IxAtmLogicalPort [in] - the port on which this PDU was received + * a logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call + * to @a ixAtmdAccRxVcConnect() + * @param status @ref IxAtmdAccPduStatus [in] - an indication about the PDU validity. + * In the case of AAL0 the only possibile value is + * AAL0_VALID, in this case the client may optionally determine + * that an rx timeout occured by checking if the mbuf is + * compleletly or only partially filled, the later case + * indicating a timeout. + * In the case of OAM the only possible value is OAM valid. + * The status is set to @a IX_ATMDACC_MBUF_RETURN when + * the mbuf is released during a disconnect process. + * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU. + * For AAL5/AAL0_48 this information + * is set if the clp bit of any rx cell is set + * For AAL0-52/OAM the client may inspect the CLP in individual + * cell headers in the PDU, and this parameter is set to 0. + * @param *mbufPtr @ref IX_OSAL_MBUF [in] - depending on the servive type a pointer to + * an mbuf (AAL5/AAL0/OAM) or mbuf chain (AAL5 only), + * that comprises the complete PDU data. + * + * This parameter is guaranteed not to be a null pointer. + * + */ +typedef void (*IxAtmdAccRxVcRxCallback) (IxAtmLogicalPort port, + IxAtmdAccUserId userId, + IxAtmdAccPduStatus status, + IxAtmdAccClpStatus clp, + IX_OSAL_MBUF * mbufPtr); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @brief Callback prototype for free buffer level is low. + * + * IxAtmdAccRxVcFreeLowCallback is the prototype of the user function + * which get called on a per-VC basis, when more mbufs are needed to + * continue the ATM data reception. This function is likely to supply + * more available mbufs by one or many calls to the replenish function + * @a ixAtmdAccRxVcFreeReplenish() + * + * This function is called when the number of available buffers for + * reception is going under the threshold level as defined + * in @a ixAtmdAccRxVcFreeLowCallbackRegister() + * + * This function is called inside an Qmgr dispatch context. No system + * resource or interrupt-unsafe feature should be used inside this + * callback. + * + * @sa ixAtmdAccRxVcFreeLowCallbackRegister + * @sa IxAtmdAccRxVcFreeLowCallback + * @sa ixAtmdAccRxVcFreeReplenish + * @sa ixAtmdAccRxVcFreeEntriesQuery + * @sa ixAtmdAccRxVcConnect + * + * @param userId @ref IxAtmdAccUserId [in] - user Id provided in the call + * to @a ixAtmdAccRxVcConnect() + * + * @return None + * + */ +typedef void (*IxAtmdAccRxVcFreeLowCallback) (IxAtmdAccUserId userId); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to TX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccAPI + * + * @brief Buffer callback prototype. + * + * This function is called to relinguish ownership of a transmitted + * buffer chain to the user. + * + * @note -In the case of a chained mbuf the AmtdAcc component can + * chain many user buffers together and pass ownership to the user in + * one function call. + * + * @param userId @ref IxAtmdAccUserId [in] - user If provided at registration of this + * callback. + * @param mbufPtr @ref IX_OSAL_MBUF [in] - a pointer to mbufs or chain of mbufs and is + * guaranteed not to be a null pointer. + * + */ +typedef void (*IxAtmdAccTxVcBufferReturnCallback) (IxAtmdAccUserId userId, + IX_OSAL_MBUF * mbufPtr); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to Initialisation + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccInit (void) + * + * @brief Initialise the IxAtmdAcc Component + * + * This function initialise the IxAtmdAcc component. This function shall + * be called before any other function of the API. Its role is to + * initialise all internal resources of the IxAtmdAcc component. + * + * The ixQmgr component needs to be initialized prior the use of + * @a ixAtmdAccInit() + * + * @param none + * + * Failing to initilialize the IxAtmdAcc API before any use of it will + * result in a failed status. + * If the specified component is not present, a success status will still be + * returned, however, a warning indicating the NPE to download to is not + * present will be issued. + * + * @return @li IX_SUCCESS initialisation is complete (in case of component not + * being present, a warning is clearly indicated) + * @return @li IX_FAIL unable to process this request either + * because this IxAtmdAcc is already initialised + * or some unspecified error has occrred. + */ +PUBLIC IX_STATUS ixAtmdAccInit (void); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccShow (void) + * + * @brief Show IxAtmdAcc configuration on a per port basis + * + * @param none + * + * @return none + * + * @note - Display use printf() and are redirected to stdout + */ +PUBLIC void +ixAtmdAccShow (void); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccStatsShow (void) + * + * @brief Show all IxAtmdAcc stats + * + * @param none + * + * @return none + * + * @note - Stats display use printf() and are redirected to stdout + */ +PUBLIC void +ixAtmdAccStatsShow (void); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccStatsReset (void) + * + * @brief Reset all IxAtmdAcc stats + * + * @param none + * + * @return none + * + */ +PUBLIC void +ixAtmdAccStatsReset (void); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to RX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcConnect (IxAtmLogicalPort port, + unsigned int vpi, + unsigned int vci, + IxAtmdAccAalType aalServiceType, + IxAtmRxQueueId rxQueueId, + IxAtmdAccUserId userCallbackId, + IxAtmdAccRxVcRxCallback rxCallback, + unsigned int minimumReplenishCount, + IxAtmConnId * connIdPtr, + IxAtmNpeRxVcId * npeVcIdPtr ) + * + * @brief Connect to a Aal Pdu receive service for a particular + * port/vpi/vci, and service type. + * + * This function allows a user to connect to an Aal5/Aal0/OAM Pdu receive service + * for a particular port/vpi/vci. It registers the callback and allocates + * internal resources and a Connection Id to be used in further API calls + * related to this VCC. + * + * The function will setup VC receive service on the specified rx queue. + * + * This function is blocking and makes use internal locks, and hence + * should not be called from an interrupt context. + * + * On return from @a ixAtmdAccRxVcConnect() with a failure status, the + * connection Id parameter is unspecified. Its value cannot be used. + * A connId is the reference by which IxAtmdAcc refers to a + * connected VC. This identifier is the result of a succesful call + * to a connect function. This identifier is invalid after a + * sucessful call to a disconnect function. + * + * Calling this function for the same combination of Vpi, Vci and more + * than once without calling @a ixAtmdAccRxVcTryDisconnect() will result in a + * failure status. + * + * If this function returns success the user should supply receive + * buffers by calling @a ixAtmdAccRxVcFreeReplenish() and then call + * @a ixAtmdAccRxVcEnable() to begin receiving pdus. + * + * There is a choice of two receive Qs on which the VC pdus could be + * receive. The user must associate the VC with one of these. Essentially + * having two qs allows more flexible system configuration such as have + * high prioriy traffic on one q (e.g. voice) and low priority traffic on + * the other (e.g. data). The high priority Q could be serviced in + * preference to the low priority Q. One queue may be configured to be + * serviced as soon as there is traffic, the other queue may be configured + * to be serviced by a polling mechanism running at idle time. + * + * Two AAL0 services supporting 48 or 52 byte cell data are provided. + * Received AAL0 PDUs will be be a multiple of the cell data size (48/52). + * AAL0_52 is a raw cell service and includes an ATM cell header + * (excluding HEC) at the start of each cell. + * + * A single "OAM Rx channel" for all ports may be enabled by + * establishing a dedicated OAM Rx connection. + * + * The OAM service allows buffers containing 52 byte OAM F4/F5 cells + * to be transmitted and received over the dedicated OAM channels. + * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM + * service offered by AtmdAcc is a raw cell transport service. + * It is assumed that ITU I.610 procedures that make use of this + * service are implemented above AtmdAcc. + * + * Note that the dedicated OAM connections are established on + * reserved VPI,VCI, and (in the case of Rx) port values. + * These values are used purely to descriminate the dedicated OAM channels + * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be + * realised for particluar VPI/VCIs by manipulating the VPI,VCI + * fields of the ATM cell headers of cells in the buffers passed + * to AtmdAcc. + * + * Calling this function prior to enable the port will fail. + * + * @sa ixAtmdAccRxDispatch + * @sa ixAtmdAccRxVcEnable + * @sa ixAtmdAccRxVcDisable + * @sa ixAtmdAccRxVcTryDisconnect + * @sa ixAtmdAccPortEnable + * + * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port + * [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI + * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI + * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service: AAL5, AAL0_48, AAL0_52, or OAM + * @param rxQueueId @ref IxAtmRxQueueId [in] - this identifieds which of two Qs the VC + * should use.when icoming traffic is processed + * @param userCallbackId @ref IxAtmdAccUserId [in] - user Id used later as a parameter to + * the supplied rxCallback. + * @param rxCallback [in] @ref IxAtmdAccRxVxRxCallback - function called when mbufs are received. + * This parameter cannot be a null pointer. + * @param bufferFreeCallback [in] - function to be called to return + * ownership of buffers to IxAtmdAcc user. + * @param minimumReplenishCount unsigned int [in] - For AAL5/AAL0 the number of free mbufs + * to be used with this channel. Use a high number when the expected traffic + * rate on this channel is high, or when the user's mbufs are small, or when + * the RxVcFreeLow Notification has to be invoked less often. When this + * value is IX_ATMDACC_DEFAULT_REPLENISH_COUNT, the minimum of + * resources will be used. Depending on traffic rate, pdu + * size and mbuf size, rxfree queue size, polling/interrupt rate, this value may + * require to be replaced by a different value in the range 1-128 + * For OAM the rxFree queue size is fixed by atmdAcc and this parameter is ignored. + * @param connIdPtr @ref IxAtmConnId [out] - pointer to a connection Id + * This parameter cannot be a null pointer. + * @param npeVcIdPtr @ref IxAtmNpeRxVcId [out] - pointer to an npe Vc Id + * This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS successful call to IxAtmdAccRxVcConnect + * @return @li IX_ATMDACC_BUSY cannot process this request : + * no VC is available + * @return @li IX_FAIL + * parameter error, + * VC already in use, + * attempt to connect AAL service on reserved OAM VPI/VCI, + * attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI, + * port is not initialised, + * or some other error occurs during processing. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcConnect (IxAtmLogicalPort port, + unsigned int vpi, + unsigned int vci, + IxAtmdAccAalType aalServiceType, + IxAtmRxQueueId rxQueueId, + IxAtmdAccUserId userCallbackId, + IxAtmdAccRxVcRxCallback rxCallback, + unsigned int minimumReplenishCount, + IxAtmConnId * connIdPtr, + IxAtmNpeRxVcId * npeVcIdPtr ); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId, + IX_OSAL_MBUF * mbufPtr) + * + * @brief Provide free mbufs for data reception on a connection. + * + * This function provides mbufs for data reception by the hardware. This + * function needs to be called by the user on a regular basis to ensure + * no packet loss. Providing free buffers is a connection-based feature; + * each connection can have different requirements in terms of buffer size + * number of buffers, recycling rate. This function could be invoked from + * within the context of a @a IxAtmdAccRxVcFreeLowCallback() callback + * for a particular VC + * + * Mbufs provided through this function call can be chained. They will be + * unchained internally. A call to this function with chained mbufs or + * multiple calls with unchained mbufs are equivalent, but calls with + * unchained mbufs are more efficients. + * + * Mbufs provided to this interface need to be able to hold at least one + * full cell payload (48/52 bytes, depending on service type). + * Chained buffers with a size less than the size supported by the hardware + * will be returned through the rx callback provided during the connect step. + * + * Failing to invoke this function prior to enabling the RX traffic + * can result in packet loss. + * + * This function is not reentrant for the same connId. + * + * This function does not use system resources and can be + * invoked from an interrupt context. + * + * @note - Over replenish is detected, and extra mbufs are returned through + * the rx callback provided during the connect step. + * + * @note - Mbuf provided to the replenish function should have a length greater or + * equal to 48/52 bytes according to service type. + * + * @note - The memory cache of mMbuf payload should be invalidated prior to Mbuf + * submission. Flushing the Mbuf headers is handled by IxAtmdAcc. + * + * @note - When a chained mbuf is provided, this function process the mbufs + * up to the hardware limit and invokes the user-supplied callback + * to release extra buffers. + * + * @sa ixAtmdAccRxVcFreeLowCallbackRegister + * @sa IxAtmdAccRxVcFreeLowCallback + * @sa ixAtmdAccRxVcConnect + * + * @param connId @ref IxAtmConnId [in] - connection Id as returned from a succesfull call to + * @a IxAtmdAccRxVcConnect() + * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a mbuf structure to be used for data + * reception. The mbuf pointed to by this parameter can be chained + * to an other mbuf. + * + * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcFreeReplenish() + * and the mbuf is now ready to use for incoming traffic. + * @return @li IX_ATMDACC_BUSY cannot process this request because + * the max number of outstanding free buffers has been reached + * or the internal resources have exhausted for this VC. + * The user is responsible for retrying this request later. + * @return @li IX_FAIL cannot process this request because of parameter + * errors or some unspecified internal error has occurred. + * + * @note - It is not always guaranteed the replenish step to be as fast as the + * hardware is consuming Rx Free mbufs. There is nothing in IxAtmdAcc to + * guarantee that replenish reaches the rxFree threshold level. If the + * threshold level is not reached, the next rxFree low notification for + * this channel will not be triggered. + * The preferred ways to replenish can be as follows (depending on + * applications and implementations) : + * @li Replenish in a rxFree low notification until the function + * ixAtmdAccRxVcFreeReplenish() returns IX_ATMDACC_BUSY + * @li Query the queue level using @sa ixAtmdAccRxVcFreeEntriesQuery, then + * , replenish using @a ixAtmdAccRxVcFreeReplenish(), then query the queue + * level again, and replenish if the threshold is still not reached. + * @li Trigger replenish from an other event source and use rxFree starvation + * to throttle the Rx traffic. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcFreeReplenish (IxAtmConnId connId, + IX_OSAL_MBUF * mbufPtr); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId, + unsigned int numberOfMbufs, + IxAtmdAccRxVcFreeLowCallback callback) + * + * @brief Configure the RX Free threshold value and register a callback + * to handle threshold notifications. + * + * The function ixAtmdAccRxVcFreeLowCallbackRegister sets the threshold value for + * a particular RX VC. When the number of buffers reaches this threshold + * the callback is invoked. + * + * This function should be called once per VC before RX traffic is + * enabled.This function will fail if the curent level of the free buffers + * is equal or less than the threshold value. + * + * @sa ixAtmdAccRxVcFreeLowCallbackRegister + * @sa IxAtmdAccRxVcFreeLowCallback + * @sa ixAtmdAccRxVcFreeReplenish + * @sa ixAtmdAccRxVcFreeEntriesQuery + * @sa ixAtmdAccRxVcConnect + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call + * to @a IxAtmdAccRxVcConnect() + * @param numberOfMbufs unsigned int [in] - threshold number of buffers. This number + * has to be a power of 2, one of the values 0,1,2,4,8,16,32.... + * The maximum value cannot be more than half of the rxFree queue + * size (which can be retrieved using @a ixAtmdAccRxVcFreeEntriesQuery() + * before any use of the @a ixAtmdAccRxVcFreeReplenish() function) + * @param callback @ref IxAtmdAccRxVcFreeLowCallback [in] - function telling the user that the number of + * free buffers has reduced to the threshold value. + * + * @return @li IX_SUCCESS Threshold set successfully. + * @return @li IX_FAIL parameter error or the current number of free buffers + * is less than or equal to the threshold supplied or some + * unspecified error has occrred. + * + * @note - the callback will be called when the threshold level will drop from + * exactly (numberOfMbufs + 1) to (numberOfMbufs). + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcFreeLowCallbackRegister (IxAtmConnId connId, + unsigned int numberOfMbufs, + IxAtmdAccRxVcFreeLowCallback callback); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId, + unsigned int *numberOfMbufsPtr) + * + * @brief Get the number of rx mbufs the system can accept to replenish the + * the rx reception mechanism on a particular channel + * + * The ixAtmdAccRxVcFreeEntriesQuery function is used to retrieve the current + * number of available mbuf entries for reception, on a per-VC basis. This + * function can be used to know the number of mbufs which can be provided + * using @a ixAtmdAccRxVcFreeReplenish(). + * + * This function can be used from a timer context, or can be associated + * with a threshold event, or can be used inside an active polling + * mechanism which is under user control. + * + * This function is reentrant and does not use system resources and can + * be invoked from an interrupt context. + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call + * to @a IxAtmdAccRxVcConnect() + * @param numberOfMbufsPtr unsigned int [out] - Pointer to the number of available entries. + * . This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS the current number of mbufs not yet used for incoming traffic + * @return @li IX_FAIL invalid parameter + * + * @sa ixAtmdAccRxVcFreeReplenish + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcFreeEntriesQuery (IxAtmConnId connId, + unsigned int *numberOfMbufsPtr); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcEnable (IxAtmConnId connId) + * + * @brief Start the RX service on a VC. + * + * This functions kicks-off the traffic reception for a particular VC. + * Once invoked, incoming PDUs will be made available by the hardware + * and are eventually directed to the @a IxAtmdAccRxVcRxCallback() callback + * registered for the connection. + * + * If the traffic is already running, this function returns IX_SUCCESS. + * This function can be invoked many times. + * + * IxAtmdAccRxVcFreeLowCallback event will occur only after + * @a ixAtmdAccRxVcEnable() function is invoked. + * + * Before using this function, the @a ixAtmdAccRxVcFreeReplenish() function + * has to be used to replenish the RX Free queue. If not, incoming traffic + * may be discarded.and in the case of interrupt driven reception the + * @a IxAtmdAccRxVcFreeLowCallback() callback may be invoked as a side effect + * during a replenish action. + * + * This function is not reentrant and should not be used inside an + * interrupt context. + * + * For an VC connection this function can be called after a call to + * @a ixAtmdAccRxVcDisable() and should not be called after + * @a ixAtmdAccRxVcTryDisconnect() + * + * @sa ixAtmdAccRxVcDisable + * @sa ixAtmdAccRxVcConnect + * @sa ixAtmdAccRxVcFreeReplenish + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call + * to @a IxAtmdAccRxVcConnect() + * + * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcEnable + * @return @li IX_ATMDACC_WARNING the channel is already enabled + * @return @li IX_FAIL invalid parameters or some unspecified internal + * error occured. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcEnable (IxAtmConnId connId); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcDisable (IxAtmConnId connId) + * + * @brief Stop the RX service on a VC. + * + * This functions stops the traffic reception for a particular VC connection. + * + * Once invoked, incoming Pdus are discarded by the hardware. Any Pdus + * pending will be freed to the user + * + * Hence once this function returns no more receive callbacks will be + * called for that VC. However, buffer free callbacks will be invoked + * until such time as all buffers supplied by the user have been freed + * back to the user + * + * Calling this function doe not invalidate the connId. + * @a ixAtmdAccRxVcEnable() can be invoked to enable Pdu reception again. + * + * If the traffic is already stopped, this function returns IX_SUCCESS. + * + * This function is not reentrant and should not be used inside an + * interrupt context. + * + * @sa ixAtmdAccRxVcConnect + * @sa ixAtmdAccRxVcEnable + * @sa ixAtmdAccRxVcDisable + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to @a + * IxAtmdAccRxVcConnect() + * + * @return @li IX_SUCCESS successful call to @a ixAtmdAccRxVcDisable(). + * @return @li IX_ATMDACC_WARNING the channel is already disabled + * @return @li IX_FAIL invalid parameters or some unspecified internal error occured + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcDisable (IxAtmConnId connId); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId) + * + * @brief Disconnect a VC from the RX service. + * + * This function deregisters the VC and guarantees that all resources + * associated with this VC are free. After its execution, the connection + * Id is not available. + * + * This function will fail until such time as all resources allocated to + * the VC connection have been freed. The user is responsible to delay and + * call again this function many times until a success status is returned. + * + * This function needs internal locks and should not be called from an + * interrupt context + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to + * @a IxAtmdAccRxVcConnect() + * + * @return @li IX_SUCCESS successful call to ixAtmdAccRxVcDisable + * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources + * associated with the connection have been freed. + * @return @li IX_FAIL cannot process this request because of a parameter + * error + * + */ +PUBLIC IX_STATUS ixAtmdAccRxVcTryDisconnect (IxAtmConnId connId); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to TX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccTxVcConnect (IxAtmLogicalPort port, + unsigned int vpi, + unsigned int vci, + IxAtmdAccAalType aalServiceType, + IxAtmdAccUserId userId, + IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback, + IxAtmConnId * connIdPtr) + * + * @brief Connect to a Aal Pdu transmit service for a particular + * port/vpi/vci and service type. + * + * This function allows a user to connect to an Aal5/Aal0/OAM Pdu transmit service + * for a particular port/vpi/vci. It registers the callback and allocates + * internal resources and a Connection Id to be used in further API calls + * related to this VC. + * + * The function will setup VC transmit service on the specified on the + * specified port. A connId is the reference by which IxAtmdAcc refers to a + * connected VC. This identifier is the result of a succesful call + * to a connect function. This identifier is invalid after a + * sucessful call to a disconnect function. + * + * This function needs internal locks, and hence should not be called + * from an interrupt context. + * + * On return from @a ixAtmdAccTxVcConnect() with a failure status, the + * connection Id parameter is unspecified. Its value cannot be used. + * + * Calling this function for the same combination of port, Vpi, Vci and + * more than once without calling @a ixAtmdAccTxVcTryDisconnect() will result + * in a failure status. + * + * Two AAL0 services supporting 48 or 52 byte cell data are provided. + * Submitted AAL0 PDUs must be a multiple of the cell data size (48/52). + * AAL0_52 is a raw cell service the client must format + * the PDU with an ATM cell header (excluding HEC) at the start of + * each cell, note that AtmdAcc does not validate the cell headers in + * a submitted PDU. + * + * For the OAM service an "OAM Tx channel" may be enabled for a port + * by establishing a single dedicated OAM Tx connection on that port. + * + * The OAM service allows buffers containing 52 byte OAM F4/F5 cells + * to be transmitted and received over the dedicated OAM channels. + * HEC is appended/removed, and CRC-10 performed by the NPE. The OAM + * service offered by AtmdAcc is a raw cell transport service. + * It is assumed that ITU I.610 procedures that make use of this + * service are implemented above AtmdAcc. + * + * Note that the dedicated OAM connections are established on + * reserved VPI,VCI, and (in the case of Rx) port values. + * These values are used purely to descriminate the dedicated OAM channels + * and do not identify a particular OAM F4/F5 flow. F4/F5 flows may be + * realised for particluar VPI/VCIs by manipulating the VPI,VCI + * fields of the ATM cell headers of cells in the buffers passed + * to AtmdAcc. + * + * Calling this function before enabling the port will fail. + * + * @sa ixAtmdAccTxVcTryDisconnect + * @sa ixAtmdAccPortTxScheduledModeEnable + * @sa ixAtmdAccPortEnable + * + * @param port @ref IxAtmLogicalPort [in] - VC identification : logical PHY port + * [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param vpi unsigned int [in] - VC identification : ATM Vpi [0..255] or IX_ATMDACC_OAM_VPI + * @param vci unsigned int [in] - VC identification : ATM Vci [0..65535] or IX_ATMDACC_OAM_VCI + * @param aalServiceType @ref IxAtmdAccAalType [in] - type of service AAL5, AAL0_48, AAL0_52, or OAM + * @param userId @ref IxAtmdAccUserId [in] - user id to be used later during callbacks related + * to this channel + * @param bufferFreeCallback @ref IxAtmdAccTxVcBufferReturnCallback [in] - function called when mbufs + * transmission is complete. This parameter cannot be a null + * pointer. + * @param connIdPtr @ref IxAtmConnId [out] - Pointer to a connection Id. + * This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS successful call to @a IxAtmdAccRxVcConnect(). + * @return @li IX_ATMDACC_BUSY cannot process this request + * because no VC is available + * @return @li IX_FAIL + * parameter error, + * VC already in use, + * attempt to connect AAL service on reserved OAM VPI/VCI, + * attempt to connect OAM service on VPI/VCI other than the reserved OAM VPI/VCI, + * port is not initialised, + * or some other error occurs during processing. + * + * @note - Unscheduled mode is not supported in ixp425 1.0. Therefore, the + * function @a ixAtmdAccPortTxScheduledModeEnable() need to be called + * for this port before any establishing a Tx Connection + */ +PUBLIC IX_STATUS ixAtmdAccTxVcConnect (IxAtmLogicalPort port, + unsigned int vpi, + unsigned int vci, + IxAtmdAccAalType aalServiceType, + IxAtmdAccUserId userId, + IxAtmdAccTxVcBufferReturnCallback bufferFreeCallback, + IxAtmConnId * connIdPtr); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccTxVcPduSubmit (IxAtmConnId connId, + IX_OSAL_MBUF * mbufPtr, + IxAtmdAccClpStatus clp, + unsigned int numberOfCells) + * + * @brief Submit a Pdu for transmission on connection. + * + * A data user calls this function to submit an mbufs containing a Pdu + * to be transmitted. The buffer supplied can be chained and the Pdu it + * contains must be complete. + * + * The transmission behavior of this call depends on the operational mode + * of the port on which the connection is made. + * + * In unscheduled mode the mbuf will be submitted to the hardware + * immediately if sufficent resource is available. Otherwise the function + * will return failure. + * + * In scheduled mode the buffer is queued internally in IxAtmdAcc. The cell + * demand is made known to the traffic shaping entity. Cells from the + * buffers are MUXed onto the port some time later as dictated by the + * traffic shaping entity. The traffic shaping entity does this by sending + * transmit schedules to IxAtmdAcc via @a ixAtmdAccPortTxProcess() function call. + * + * Note that the dedicated OAM channel is scheduled just like any + * other channel. This means that any OAM traffic relating to an + * active AAL0/AAL5 connection will be scheduled independantly of the + * AAL0/AAL5 traffic for that connection. + * + * When transmission is complete, the TX Done mechanism will give the + * owmnership of these buffers back to the customer. The tx done mechanism + * must be in operation before transmission is attempted. + * + * For AAL0/OAM submitted AAL0 PDUs must be a multiple of the cell data + * size (48/52). AAL0_52 and OAM are raw cell services, and the client + * must format the PDU with an ATM cell header (excluding HEC) at the + * start of each cell, note that AtmdAcc does not validate the cell headers in + * a submitted PDU. + * + * + * @sa IxAtmdAccTxVcBufferReturnCallback + * @sa ixAtmdAccTxDoneDispatch + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to + * @a ixAtmdAccTxVcConnect() + * @param mbufPtr @ref IX_OSAL_MBUF [in] - pointer to a chained structure of mbufs to transmit. + * This parameter cannot be a null pointer. + * @param clp @ref IxAtmdAccClpStatus [in] - clp indication for this PDU. All cells of this pdu + * will be sent with the clp bit set + * @param numberOfCells unsigned int [in] - number of cells in the PDU. + * + * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcPduSubmit() + * The pdu pointed by the mbufPtr parameter will be + * transmitted + * @return @li IX_ATMDACC_BUSY unable to process this request because + * internal resources are all used. The caller is responsible + * for retrying this request later. + * @return @li IX_FAIL unable to process this request because of error + * in the parameters (wrong connId supplied, + * or wrong mbuf pointer supplied), the total length of all buffers + * in the chain should be a multiple of the cell size + * ( 48/52 depending on the service type ), + * or unspecified error during processing + * + * @note - This function in not re-entrant for the same VC (e.g. : two + * thread cannot send PDUs for the same VC). But two threads can + * safely call this function with a different connection Id + * + * @note - In unscheduled mode, this function is not re-entrant on a per + * port basis. The size of pdus is limited to 8Kb. + * + * @note - 0-length mbufs should be removed from the chain before submission. + * The total length of the pdu (sdu + padding +trailer) has to be + * updated in the header of the first mbuf of a chain of mbufs. + * + * @note - Aal5 trailer information (UUI, CPI, SDU length) has to be supplied + * before submission. + * + * @note - The payload memory cache should be flushed, if needed, prior to + * transmission. Mbuf headers are flushed by IxAtmdAcc + * + * @note - This function does not use system resources and can be used + * inside an interrupt context + */ +PUBLIC IX_STATUS ixAtmdAccTxVcPduSubmit (IxAtmConnId connId, + IX_OSAL_MBUF * mbufPtr, + IxAtmdAccClpStatus clp, + unsigned int numberOfCells); + +/** + * + * @ingroup IxAtmdAccAPI + * + * @fn ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId) + * + * @brief Disconnect from a Aal Pdu transmit service for a particular + * port/vpi/vci. + * + * This function deregisters the VC and guarantees that all resources + * associated with this VC are free. After its execution, the connection + * Id is not available. + * + * This function will fail until such time as all resources allocated to + * the VC connection have been freed. The user is responsible to delay + * and call again this function many times until a success status is + * returned. + * + * After its execution, the connection Id is not available. + * + * @param connId @ref IxAtmConnId [in] - connection Id as resulted from a succesfull call to + * @a ixAtmdAccTxVcConnect() + * + * @return @li IX_SUCCESS successful call to @a ixAtmdAccTxVcTryDisconnect() + * @return @li IX_ATMDACC_RESOURCES_STILL_ALLOCATED not all resources + * associated with the connection have been freed. This condition will + * disappear after Tx and TxDone is complete for this channel. + * @return @li IX_FAIL unable to process this request because of errors + * in the parameters (wrong connId supplied) + * + * @note - This function needs internal locks and should not be called + * from an interrupt context + * + * @note - If the @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED error does not + * clear after a while, this may be linked to a previous problem + * of cell overscheduling. Diabling the port and retry a disconnect + * will free the resources associated with this channel. + * + * @sa ixAtmdAccPortTxProcess + * + */ +PUBLIC IX_STATUS ixAtmdAccTxVcTryDisconnect (IxAtmConnId connId); + +#endif /* IXATMDACC_H */ + +/** + * @} defgroup IxAtmdAccAPI + */ + + diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h new file mode 100644 index 0000000000..50ef582f73 --- /dev/null +++ b/drivers/net/npe/include/IxAtmdAccCtrl.h @@ -0,0 +1,1958 @@ + +/** + * @file IxAtmdAccCtrl.h + * + * @date 20-Mar-2002 + * + * @brief IxAtmdAcc Public API + * + * This file contains the public API of IxAtmdAcc, related to the + * control functions of the component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* ------------------------------------------------------ + Doxygen group definitions + ------------------------------------------------------ */ + +/** + * + * @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API + * + * @brief The public API for the IXP400 Atm Driver Control component + * + * IxAtmdAcc is the low level interface by which AAL PDU get transmitted + * to,and received from the Utopia bus + * + * This part is related to the Control configuration + * + * @{ + */ + +#ifndef IXATMDACCCTRL_H +#define IXATMDACCCTRL_H + +#include "IxAtmdAcc.h" + +/* ------------------------------------------------------ + AtmdAccCtrl Data Types definition + ------------------------------------------------------ */ + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS +* +* @brief Port enable return code +* +* This constant is used to tell IxAtmDAcc user that the port disable +* functions are not complete. The user can call ixAtmdAccPortDisableComplete() +* to find out when the disable has finished. The port enable can then proceed. +* +*/ +#define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5 + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @def IX_ATMDACC_ALLPDUS +* +* @brief All PDUs +* +* This constant is used to tell IxAtmDAcc to process all PDUs from +* the RX queue or the TX Done +* +* @sa IxAtmdAccRxDispatcher +* @sa IxAtmdAccTxDoneDispatcher +* +*/ +#define IX_ATMDACC_ALLPDUS 0xffffffff + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to RX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @brief Callback prototype for notification of available PDUs for + * an Rx Q. + * + * This a protoype for a function which is called when there is at + * least one Pdu available for processing on a particular Rx Q. + * + * This function should call @a ixAtmdAccRxDispatch() with + * the aprropriate number of parameters to read and process the Rx Q. + * + * @sa ixAtmdAccRxDispatch + * @sa ixAtmdAccRxVcConnect + * @sa ixAtmdAccRxDispatcherRegister + * + * @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process. + * @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of + * PDUs available to process all PDUs from the queue. + * @param reservedPtr unsigned int* [out] pointer to a int location which can + * be written to, but does not retain written values. This is + * provided to make this prototype compatible + * with @a ixAtmdAccRxDispatch() + * + * @return @li int - ignored. + * + */ +typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId, + unsigned int numberOfPdusToProcess, + unsigned int *reservedPtr); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to TX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @brief Callback prototype for transmitted mbuf when threshold level is + * crossed. + * + * IxAtmdAccTxDoneDispatcher is the prototype of the user function + * which get called when pdus are completely transmitted. This function + * is likely to call the @a ixAtmdAccTxDoneDispatch() function. + * + * This function is called when the number of available pdus for + * reception is crossing the threshold level as defined + * in @a ixAtmdAccTxDoneDispatcherRegister() + * + * This function is called inside an Qmgr dispatch context. No system + * resource or interrupt-unsafe feature should be used inside this + * callback. + * + * Transmitted buffers recycling implementation is a sytem-wide mechanism + * and needs to be set before any traffic is started. If this threshold + * mechanism is not used, the user is responsible for polling the + * transmitted buffers with @a ixAtmdAccTxDoneDispatch() + * and @a ixAtmdAccTxDoneLevelQuery() functions. + * + * @sa ixAtmdAccTxDoneDispatcherRegister + * @sa ixAtmdAccTxDoneDispatch + * @sa ixAtmdAccTxDoneLevelQuery + * + * @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently + * available for recycling + * @param *reservedPtr unsigned int [out] - pointer to a int location which can be + * written to but does not retain written values. This is provided + * to make this prototype compatible + * with @a ixAtmdAccTxDoneDispatch() + * + * @return @li IX_SUCCESS This is provided to make + * this prototype compatible with @a ixAtmdAccTxDoneDispatch() + * @return @li IX_FAIL invalid parameters or some unspecified internal + * error occured. This is provided to make + * this prototype compatible with @a ixAtmdAccTxDoneDispatch() + * + */ +typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess, + unsigned int *reservedPtr); + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @brief Notification that the threshold number of scheduled cells +* remains in a port's transmit Q. +* +* The is the prototype for of the user notification function which +* gets called on a per-port basis, when the number of remaining +* scheduled cells to be transmitted decreases to the threshold level. +* The number of cells passed as a parameter can be used for scheduling +* purposes as the maximum number of cells that can be passed in a +* schedule table to the @a ixAtmdAccPortTxProcess() function. +* +* @sa ixAtmdAccPortTxCallbackRegister +* @sa ixAtmdAccPortTxProcess +* @sa ixAtmdAccPortTxFreeEntriesQuery +* +* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] +* @param numberOfAvailableCells unsigned int [in] - number of available +* cell entries.for the port +* +* @note - This functions shall not use system resources when used +* inside an interrupt context. +* +*/ +typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port, + unsigned int numberOfAvailableCells); + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @brief Prototype to submit cells for transmission +* +* IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback +* function used by AtmD to notify an ATM Scheduler that the user of +* a VC has submitted cells for transmission. +* +* @sa IxAtmdAccTxVcDemandUpdateCallback +* @sa IxAtmdAccTxVcDemandClearCallback +* @sa IxAtmdAccTxSchVcIdGetCallback +* @sa ixAtmdAccPortTxScheduledModeEnable +* +* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated +* is established +* @param vcId int [in] - Identifies the VC to be updated. This is the value +* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . +* @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added +* to the queue for this VC. +* +* @return @li IX_SUCCESS the function is registering the cell demand for +* this VC. +* @return @li IX_FAIL the function cannot register cell for this VC : the +* scheduler maybe overloaded or misconfigured +* +*/ +typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port, + int vcId, + unsigned int numberOfCells); + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @brief prototype to remove all currently queued cells from a +* registered VC +* +* IxAtmdAccTxVcDemandClearCallback is the prototype of the function +* to remove all currently queued cells from a registered VC. The +* pending cell count for the specified VC is reset to zero. After the +* use of this callback, the scheduler shall not schedule more cells +* for this VC. +* +* This callback function is called during a VC disconnection +* @a ixAtmdAccTxVcTryDisconnect() +* +* @sa IxAtmdAccTxVcDemandUpdateCallback +* @sa IxAtmdAccTxVcDemandClearCallback +* @sa IxAtmdAccTxSchVcIdGetCallback +* @sa ixAtmdAccPortTxScheduledModeEnable +* @sa ixAtmdAccTxVcTryDisconnect +* +* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared +* is established +* @param vcId int [in] - Identifies the VC to be cleared. This is the value +* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . +* +* @return none +* +*/ +typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port, + int vcId); + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @brief prototype to get a scheduler vc id +* +* IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get +* a scheduler vcId +* +* @sa IxAtmdAccTxVcDemandUpdateCallback +* @sa IxAtmdAccTxVcDemandClearCallback +* @sa IxAtmdAccTxSchVcIdGetCallback +* @sa ixAtmdAccPortTxScheduledModeEnable +* +* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is +* established +* @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the +* VC is established. +* For OAM specifies the dedicated "OAM Tx channel" VPI. +* @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the +* VC is established. +* For OAM specifies the dedicated "OAM Tx channel" VCI. +* @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already +* associated with this VC +* @param vcId int* [out] - pointer to a vcId +* +* @return @li IX_SUCCESS the function is returning a Scheduler vcId for this +* VC +* @return @li IX_FAIL the function cannot process scheduling for this VC. +* the contents of vcId is unspecified +* +*/ +typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port, + unsigned int vpi, + unsigned int vci, + IxAtmConnId connId, + int *vcId); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to RX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccRxDispatcherRegister ( + IxAtmRxQueueId queueId, + IxAtmdAccRxDispatcher callback) + * + * @brief Register a notification callback to be invoked when there is + * at least one entry on a particular Rx queue. + * + * This function registers a callback to be invoked when there is at + * least one entry in a particular queue. The registered callback is + * called every time when the hardware adds one or more pdus to the + * specified Rx queue. + * + * This function cannot be used when a Rx Vc using this queue is + * already existing. + * + * @note -The callback function can be the API function + * @a ixAtmdAccRxDispatch() : every time the threhold level + * of the queue is reached, the ixAtmdAccRxDispatch() is + * invoked to remove all entries from the queue. + * + * @sa ixAtmdAccRxDispatch + * @sa IxAtmdAccRxDispatcher + * + * @param queueId @ref IxAtmRxQueueId [in] RX queue identification + * @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming + * traffic. This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister() + * @return @li IX_FAIL error in the parameters, or there is an + * already active RX VC for this queue or some unspecified + * internal error occurred. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister ( + IxAtmRxQueueId queueId, + IxAtmdAccRxDispatcher callback); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, + unsigned int numberOfPdusToProcess, + unsigned int *numberOfPdusProcessedPtr) + * + * + * @brief Control function which executes Rx processing for a particular + * Rx stream. + * + * The @a IxAtmdAccRxDispatch() function is used to process received Pdus + * available from one of the two incoming RX streams. When this function + * is invoked, the incoming traffic (up to the number of PDUs passed as + * a parameter) will be transferred to the IxAtmdAcc users through the + * callback @a IxAtmdAccRxVcRxCallback(), as registered during the + * @a ixAtmdAccRxVcConnect() call. + * + * The user receive callbacks will be executed in the context of this + * function. + * + * Failing to use this function on a regular basis when there is traffic + * will block incoming traffic and can result in Pdus being dropped by + * the hardware. + * + * This should be used to control when received pdus are handed off from + * the hardware to Aal users from a particluar stream. The function can + * be used from a timer context, or can be registered as a callback in + * response to an rx stream threshold event, or can be used inside an + * active polling mechanism which is under user control. + * + * @note - The signature of this function is directly compatible with the + * callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister(). + * + * @sa ixAtmdAccRxDispatcherRegister + * @sa IxAtmdAccRxVcRxCallback + * @sa ixAtmdAccRxVcFreeEntriesQuery + * + * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process. + * @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to + * remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates + * to process all PDUs from the queue. This includes at least the PDUs + * in the queue when the fuction is invoked. Because of real-time + * constraints, there is no guarantee thatthe queue will be empty + * when the function exits. If this parameter is greater than the + * number of entries of the queues, the function will succeed + * and the parameter numberOfPdusProcessedPtr will reflect the exact + * number of PDUs processed. + * @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU + * processed during this call. This parameter cannot be a null + * pointer. + * + * @return @li IX_SUCCESS the number of PDUs as indicated in + * numberOfPdusProcessedPtr are removed from the RX queue and the VC callback + * are called. + * @return @li IX_FAIL invalid parameters or some unspecified internal + * error occured. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, + unsigned int numberOfPdusToProcess, + unsigned int *numberOfPdusProcessedPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, + unsigned int *numberOfPdusPtr) + * + * @brief Query the number of entries in a particular RX queue. + * + * This function is used to retrieve the number of pdus received by + * the hardware and ready for distribution to users. + * + * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. + * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available + * PDUs in the RX queue. This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the + * number of incoming pdus waiting in this queue + * @return @li IX_FAIL an error occurs during processing. + * The value in numberOfPdusPtr is unspecified. + * + * @note - This function is reentrant, doesn't use system resources + * and can be used from an interrupt context. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, + unsigned int *numberOfPdusPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, + unsigned int *numberOfPdusPtr) + * + * @brief Query the size of a particular RX queue. + * + * This function is used to retrieve the number of pdus the system is + * able to queue when reception is complete. + * + * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. + * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus + * the system is able to queue in the RX queue. This parameter + * cannot be a null pointer. + * + * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the + * number of pdus the system is able to queue. + * @return @li IX_FAIL an error occurs during processing. + * The value in numberOfPdusPtr is unspecified. + * + * @note - This function is reentrant, doesn't use system resources + * and can be used from an interrupt context. + * + */ +PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, + unsigned int *numberOfPdusPtr); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to TX traffic + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, + unsigned int *numberOfCellsPtr) + * + * @brief Get the number of available cells the system can accept for + * transmission. + * + * The function is used to retrieve the number of cells that can be + * queued for transmission to the hardware. + * + * This number is based on the worst schedule table where one cell + * is stored in one schedule table entry, depending on the pdus size + * and mbuf size and fragmentation. + * + * This function doesn't use system resources and can be used from a + * timer context, or can be associated with a threshold event, or can + * be used inside an active polling mechanism + * + * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param numberOfCellsPtr unsigned int* [out] - number of available cells. + * This parameter cannot be a null pointer. + * + * @sa ixAtmdAccPortTxProcess + * + * @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled + * for this port. + * @return @li IX_FAIL error in the parameters, or some processing error + * occured. + * + */ +PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, + unsigned int *numberOfCellsPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, + unsigned int numberOfCells, + IxAtmdAccPortTxLowCallback callback) + * + * @brief Configure the Tx port threshold value and register a callback to handle + * threshold notifications. + * + * This function sets the threshold in cells + * + * @sa ixAtmdAccPortTxCallbackRegister + * @sa ixAtmdAccPortTxProcess + * @sa ixAtmdAccPortTxFreeEntriesQuery + * + * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param numberOfCells unsigned int [in] - threshold value which triggers the callback + * invocation, This number has to be one of the + * values 0,1,2,4,8,16,32 .... + * The maximum value cannot be more than half of the txVc queue + * size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery() + * before any Tx traffic is sent for this port) + * @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold + * level is reached. + * This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister() + * @return @li IX_FAIL error in the parameters, Tx channel already set for this port + * threshold level is not correct or within the range regarding the + * queue size:or unspecified error during processing: + * + * @note - This callback function get called when the threshold level drops from + * (numberOfCells+1) cells to (numberOfCells) cells + * + * @note - This function should be called during system initialisation, + * outside an interrupt context + * + */ +PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, + unsigned int numberOfCells, + IxAtmdAccPortTxLowCallback callback); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, + IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, + IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, + IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback) + * + * @brief Put the port into Scheduled Mode + * + * This function puts the specified port into scheduled mode of + * transmission which means an external s/w entity controls the + * transmission of cells on this port. This faciltates traffic shaping on + * the port. + * + * Any buffers submitted on a VC for this port will be queued in IxAtmdAcc. + * The transmission of these buffers to and by the hardware will be driven + * by a transmit schedule submitted regulary in calls to + * @a ixAtmdAccPortTxProcess() by traffic shaping entity. + * + * The transmit schedule is expected to be dynamic in nature based on + * the demand in cells for each VC on the port. Hence the callback + * parameters provided to this function allow IxAtmdAcc to inform the + * shaping entity of demand changes for each VC on the port. + * + * By default a port is in Unscheduled Mode so if this function is not + * called, transmission of data is done without sheduling rules, on a + * first-come, first-out basis. + * + * Once a port is put in scheduled mode it cannot be reverted to + * un-scheduled mode. Note that unscheduled mode is not supported + * in ixp425 1.0 + * + * @note - This function should be called before any VCs have be + * connected on a port. Otherwise this function call will return failure. + * + * @note - This function uses internal locks and should not be called from + * an interrupt context + * + * @sa IxAtmdAccTxVcDemandUpdateCallback + * @sa IxAtmdAccTxVcDemandClearCallback + * @sa IxAtmdAccTxSchVcIdGetCallback + * @sa ixAtmdAccPortTxProcess + * + * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update + * the number of outstanding cells for transmission. This parameter + * cannot be a null pointer. + * @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all + * clear the number of outstanding cells for a VC. This parameter + * cannot be a null pointer. + * @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc + * Identifiers between IxAtmdAcc and the entity supplying the + * transmit schedule. This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS scheduler registration is complete and the port + * is now in scheduled mode. + * @return @li IX_FAIL failed (wrong parameters, or traffic is already + * enabled on this port, possibly without ATM shaping) + * + */ +PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, + IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, + IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, + IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port, + IxAtmScheduleTable* scheduleTablePtr) + * + * @brief Transmit queue cells to the H/W based on the supplied schedule + * table. + * + * This function @a ixAtmdAccPortTxProcess() process the schedule + * table provided as a parameter to the function. As a result cells are + * sent to the underlaying hardware for transmission. + * + * The schedule table is executed in its entirety or not at all. So the + * onus is on the caller not to submit a table containing more cells than + * can be transmitted at that point. The maximum numbers that can be + * transmitted is guaranteed to be the number of cells as returned by the + * function @a ixAtmdAccPortTxFreeEntriesQuery(). + * + * When the scheduler is invoked on a threshold level, IxAtmdAcc gives the + * minimum number of cells (to ensure the callback will fire again later) + * and the maximum number of cells that @a ixAtmdAccPortTxProcess() + * will be able to process (assuming the ATM scheduler is able + * to produce the worst-case schedule table, i.e. one entry per cell). + * + * When invoked ouside a threshold level, the overall number of cells of + * the schedule table should be less than the number of cells returned + * by the @a ixAtmdAccPortTxFreeEntriesQuery() function. + * + * After invoking the @a ixAtmdAccPortTxProcess() function, it is the + * user choice to query again the queue level with the function + * @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell + * number, submit an other schedule table. + * + * IxAtmdAcc will check that the number of cells in the schedule table + * is compatible with the current transmit level. If the + * + * Obsolete or invalid connection Id will be silently discarded. + * + * This function is not reentrant for the same port. + * + * This functions doesn't use system resources and can be used inside an + * interrupt context. + * + * This function is used as a response to the hardware requesting more + * cells to transmit. + * + * @sa ixAtmdAccPortTxScheduledModeEnable + * @sa ixAtmdAccPortTxFreeEntriesQuery + * @sa ixAtmdAccPortTxCallbackRegister + * @sa ixAtmdAccPortEnable + * + * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The + * content of this table is not modified by this function. This + * parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS the schedule table process is complete + * and cells are transmitted to the hardware + * @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed + * the hardware capacity If this error is ignored, further traffic + * and schedule will work correctly. + * Overscheduling does not occur when the schedule table does + * not contain more entries that the number of free entries returned + * by @a ixAtmdAccPortTxFreeEntriesQuery(). + * However, Disconnect attempts just after this error will fail permanently + * with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is + * necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect() + * successful. + * @return @li IX_FAIL a wrong parameter is supplied, or the format of + * the schedule table is invalid, or the port is not Enabled, or + * an internal severe error occured. No cells is transmitted to the hardware + * + * @note - If the failure is linked to an overschedule of data cells + * the result is an inconsistency in the output traffic (one or many + * cells may be missing and the traffic contract is not respected). + * + */ +PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port, + IxAtmScheduleTable* scheduleTablePtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, + unsigned int *numberOfPdusProcessedPtr) + * + * @brief Process a number of pending transmit done pdus from the hardware. + * + * As a by-product of Atm transmit operation buffers which transmission + * is complete need to be recycled to users. This function is invoked + * to service the oustanding list of transmitted buffers and pass them + * to VC users. + * + * Users are handed back pdus by invoking the free callback registered + * during the @a ixAtmdAccTxVcConnect() call. + * + * There is a single Tx done stream servicing all active Atm Tx ports + * which can contain a maximum of 64 entries. If this stream fills port + * transmission will stop so this function must be call sufficently + * frequently to ensure no disruption to the transmit operation. + * + * This function can be used from a timer context, or can be associated + * with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ), + * or can be used inside an active polling mechanism under user control. + * + * For ease of use the signature of this function is compatible with the + * TxDone threshold event callback prototype. + * + * This functions can be used inside an interrupt context. + * + * @sa ixAtmdAccTxDoneDispatcherRegister + * @sa IxAtmdAccTxVcBufferReturnCallback + * @sa ixAtmdAccTxDoneLevelQuery + * + * @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove + * from the TX Done queue + * @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from + * the TX Done queue. This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS the number of pdus as indicated in + * numberOfPdusToProcess are removed from the TX Done hardware + * and passed to the user through the Tx Done callback registered + * during a call to @a ixAtmdAccTxVcConnect() + * @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is + * a null pointer or some unspecified internal error occured. + * + */ +PUBLIC IX_STATUS +ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, + unsigned int *numberOfPdusProcessedPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr) + * + * @brief Query the current number of transmit pdus ready for + * recycling. + * + * This function is used to get the number of transmitted pdus which + * the hardware is ready to hand back to user. + * + * This function can be used from a timer context, or can be associated + * with a threshold event, on can be used inside an active polling + * mechanism + * + * @sa ixAtmdAccTxDoneDispatch + * + * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted + * at the time of this function call, and ready for recycling + * This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus + * ready for recycling at the time of this function call + * + * @return @li IX_FAIL wrong parameter (null pointer as parameter).or + * unspecified rocessing error occurs..The value in numberOfPdusPtr + * is unspecified. + * + */ +PUBLIC IX_STATUS +ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr) + * + * @brief Query the TxDone queue size. + * + * This function is used to get the number of pdus which + * the hardware is able to store after transmission is complete + * + * The returned value can be used to set a threshold and enable + * a callback to be notified when the number of pdus is going over + * the threshold. + * + * @sa ixAtmdAccTxDoneDispatcherRegister + * + * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system + * is able to queue after transmission + * + * @return @li IX_SUCCESS numberOfPdusPtr contains the the number of + * pdus the system is able to queue after transmission + * @return @li IX_FAIL wrong parameter (null pointer as parameter).or + * unspecified rocessing error occurs..The value in numberOfPdusPtr + * is unspecified. + * + * @note - This function is reentrant, doesn't use system resources + * and can be used from an interrupt context. + */ +PUBLIC IX_STATUS +ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, + IxAtmdAccTxDoneDispatcher notificationCallback) + * + * @brief Configure the Tx Done stream threshold value and register a + * callback to handle threshold notifications. + * + * This function sets the threshold level in term of number of pdus at + * which the supplied notification function should be called. + * + * The higher the threshold value is, the less events will be necessary + * to process transmitted buffers. + * + * Transmitted buffers recycling implementation is a sytem-wide mechanism + * and needs to be set prior any traffic is started. If this threshold + * mechanism is not used, the user is responsible for polling the + * transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and + * @a ixAtmdAccTxDoneLevelQuery() functions. + * + * This function should be called during system initialisation outside + * an interrupt context + * + * @sa ixAtmdAccTxDoneDispatcherRegister + * @sa ixAtmdAccTxDoneDispatch + * @sa ixAtmdAccTxDoneLevelQuery + * + * @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the + * callback invocation This number has to be a power of 2, one of the + * values 0,1,2,4,8,16,32 ... + * The maximum value cannot be more than half of the txDone queue + * size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery()) + * @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This + * parameter can be @a ixAtmdAccTxDoneDispatch()).This + * parameter ust not be a null pointer. + * + * @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister + * @return @li IX_FAIL error in the parameters: + * + * @note - The notificationCallback will be called exactly when the threshold level + * will increase from (numberOfPdus) to (numberOfPdus+1) + * + * @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will + * be released to the user (when txDone level is permanently under the threshold + * level. One of the preffered way to return resources to the user is to use + * a mix of txDone notifications, used together with a slow + * rate timer and an exclusion mechanism protecting from re-entrancy + * + * @note - The TxDone threshold will only hand back buffers when the threshold level is + * crossed. Setting this threshold to a great number reduce the interrupt rate + * and the cpu load, but also increase the number of outstanding mbufs and has + * a system wide impact when these mbufs are needed by other components. + * + */ +PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, + IxAtmdAccTxDoneDispatcher notificationCallback); + +/* ------------------------------------------------------ + Part of the IxAtmdAcc interface related to Utopia config + ------------------------------------------------------ */ + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API + * + * @brief The public API for the IXP400 Atm Driver Control component + * + * IxAtmdAcc is the low level interface by which AAL PDU get + * transmitted to,and received from the Utopia bus + * + * This part is related to the UTOPIA configuration. + * + * @{ + */ + +/** + * + * @brief Utopia configuration + * + * This structure is used to set the Utopia parameters + * @li contains the values of Utopia registers, to be set during initialisation + * @li contains debug commands for NPE, to be used during development steps + * + * @note - the exact description of all parameters is done in the Utopia reference + * documents. + * + */ +typedef struct +{ + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxConfig_ + * @brief Utopia Tx Config Register + */ + struct UtTxConfig_ + { + + unsigned int reserved_1:1; /**< [31] These bits are always 0.*/ + unsigned int txInterface:1; /**< [30] Utopia Transmit Interface. The following encoding + * is used to set the Utopia Transmit interface as ATM master + * or PHY slave: + * @li 1 - PHY + * @li 0 - ATM + */ + unsigned int txMode:1; /**< [29] Utopia Transmit Mode. The following encoding is used + * to set the Utopia Transmit mode to SPHY or MPHY: + * @li 1 - SPHY + * @li 0 - MPHY + */ + unsigned int txOctet:1; /**< [28] Utopia Transmit cell transfer protocol. Used to set + * the Utopia cell transfer protocol to Octet-level handshaking. + * Note this is only applicable in SPHY mode. + * @li 1 - Octet-handshaking enabled + * @li 0 - Cell-handshaking enabled + */ + unsigned int txParity:1; /**< [27] Utopia Transmit parity enabled when set. TxEvenParity + * defines the parity format odd/even. + * @li 1 - Enable Parity generation. + * @li 0 - ut_op_prty held low. + */ + unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode + * @li 1 - Even Parity Generated. + * @li 0 - Odd Parity Generated. + */ + unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit + * cell header check byte is calculated and inserted when set. + * @li 1 - Generate HEC. + * @li 0 - Disable HEC generation. + */ + unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before + * being presented on the Utopia bus. + * @li 1 - Enable HEC ExOR with value 0x55 + * @li 0 - Use generated HEC value. + */ + + unsigned int reserved_2:1; /**< [23] These bits are always 0 + */ + unsigned int txCellSize:7; /**< [22:16] Transmit expected cell size. Configures the cell size + * for the transmit module: Values between 52-64 are valid. + */ + unsigned int reserved_3:3; /**< [15:13] These bits are always 0 */ + unsigned int txAddrRange:5; /**< [12:8] When configured as an ATM master in MPHY mode this + * register specifies the upper limit of the PHY polling logical + * range. The number of active PHYs are TxAddrRange + 1. + */ + unsigned int reserved_4:3; /**< [7:5] These bits are always 0 */ + unsigned int txPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register + * specifies the physical address of the PHY. + */ + } + + utTxConfig; /**< Tx config Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxStatsConfig_ + * @brief Utopia Tx stats Register + */ + struct UtTxStatsConfig_ + { + + unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] + @li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */ + + unsigned int vci:16; /**< [19:4] ATM VCI [15:0] or PHY Address[4] */ + + unsigned int pti:3; /**< [3:1] ATM PTI [2:0] or PHY Address[3:1] + @li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test. + @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port + address as defined by this register is used for ATM statistics [4:0]. */ + + unsigned int clp:1; /**< [0] ATM CLP or PHY Address [0] + @li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test. + @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port + address as defined by this register is used for ATM statistics [4:0]. */ + } + + utTxStatsConfig; /**< Tx stats config Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxDefineIdle_ + * @brief Utopia Tx idle cells Register + */ + struct UtTxDefineIdle_ + { + + unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] + @li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */ + + unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ + + unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] + @li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/ + + unsigned int clp:1; /**< [0] ATM CLP [0] + @li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/ + } + + utTxDefineIdle; /**< Tx idle cell config Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxEnableFields_ + * @brief Utopia Tx ienable fields Register + */ + struct UtTxEnableFields_ + { + + unsigned int defineTxIdleGFC:1; /**< [31] This register is used to include or exclude the GFC + field of the ATM header when testing for Idle cells. + @li 1 - GFC field is valid. + @li 0 - GFC field ignored.*/ + + unsigned int defineTxIdlePTI:1; /**< [30] This register is used to include or exclude the PTI + field of the ATM header when testing for Idle cells. + @li 1 - PTI field is valid + @li 0 - PTI field ignored.*/ + + unsigned int defineTxIdleCLP:1; /**< [29] This register is used to include or + exclude the CLP field of the ATM header when testing for Idle cells. + @li 1 - CLP field is valid. + @li 0 - CLP field ignored. */ + + unsigned int phyStatsTxEnb:1; /**< [28] This register is used to enable or disable ATM + statistics gathering based on the specified PHY address as defined + in TxStatsConfig register. + @li 1 - Enable statistics for specified transmit PHY address. + @li 0 - Disable statistics for specified transmit PHY address. */ + + unsigned int vcStatsTxEnb:1; /**< [27] This register is used to change the ATM + statistics-gathering mode from the specified logical PHY address + to a specific VPI/VCI address. + @li 1 - Enable statistics for specified VPI/VCI address. + @li 0 - Disable statistics for specified VPI/VCI address */ + + unsigned int vcStatsTxGFC:1; /**< [26] This register is used to include or exclude the GFC + field of the ATM header when ATM VPI/VCI statistics are enabled. + GFC is only available at the UNI and uses the first 4-bits of + the VPI field. + @li 1 - GFC field is valid + @li 0 - GFC field ignored.*/ + + unsigned int vcStatsTxPTI:1; /**< [25] This register is used to include or exclude the PTI + field of the ATM header when ATM VPI/VCI statistics are enabled. + @li 1 - PTI field is valid + @li 0 - PTI field ignored.*/ + + unsigned int vcStatsTxCLP:1; /**< [24] This register is used to include or exclude the CLP + field of the ATM header when ATM VPI/VCI statistics are enabled. + @li 1 - CLP field is valid + @li 0 - CLP field ignored. */ + + unsigned int reserved_1:3; /**< [23-21] These bits are always 0 */ + + unsigned int txPollStsInt:1; /**< [20] Enable the assertion of the ucp_tx_poll_sts condition + where there is a change in polling status. + @li 1 - ucp_tx_poll_sts asserted whenever there is a change in status + @li 0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available + */ + unsigned int txCellOvrInt:1; /**< [19] Enable TxCellCount overflow CBI Transmit Status condition + assertion. + @li 1 - If TxCellCountOvr is set assert the Transmit Status Condition. + @li 0 - No CBI Transmit Status condition assertion */ + + unsigned int txIdleCellOvrInt:1; /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition + @li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition + @li 0 - No CBI Transmit Status condition assertion..*/ + + unsigned int enbIdleCellCnt:1; /**< [17] Enable Transmit Idle Cell Count. + @li 1 - Enable count of Idle cells transmitted. + @li 0 - No count is maintained. */ + + unsigned int enbTxCellCnt:1; /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells + @li 1 - Enable count of valid cells transmitted- non-idle/non-error + @li 0 - No count is maintained.*/ + + unsigned int reserved_2:16; /**< [15:0] These bits are always 0 */ + } utTxEnableFields; /**< Tx enable Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxTransTable0_ + * @brief Utopia Tx translation table Register + */ + struct UtTxTransTable0_ + { + + unsigned int phy0:5; /**< [31-27] Tx Mapping value of logical phy 0 */ + + unsigned int phy1:5; /**< [26-22] Tx Mapping value of logical phy 1 */ + + unsigned int phy2:5; /**< [21-17] Tx Mapping value of logical phy 2 */ + + unsigned int reserved_1:1; /**< [16] These bits are always 0.*/ + + unsigned int phy3:5; /**< [15-11] Tx Mapping value of logical phy 3 */ + + unsigned int phy4:5; /**< [10-6] Tx Mapping value of logical phy 4 */ + + unsigned int phy5:5; /**< [5-1] Tx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utTxTransTable0; /**< Tx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxTransTable1_ + * @brief Utopia Tx translation table Register + */ + struct UtTxTransTable1_ + { + + unsigned int phy6:5; /**< [31-27] Tx Mapping value of logical phy 6 */ + + unsigned int phy7:5; /**< [26-22] Tx Mapping value of logical phy 7 */ + + unsigned int phy8:5; /**< [21-17] Tx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy9:5; /**< [15-11] Tx Mapping value of logical phy 3 */ + + unsigned int phy10:5; /**< [10-6] Tx Mapping value of logical phy 4 */ + + unsigned int phy11:5; /**< [5-1] Tx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utTxTransTable1; /**< Tx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxTransTable2_ + * @brief Utopia Tx translation table Register + */ + struct UtTxTransTable2_ + { + + unsigned int phy12:5; /**< [31-27] Tx Mapping value of logical phy 6 */ + + unsigned int phy13:5; /**< [26-22] Tx Mapping value of logical phy 7 */ + + unsigned int phy14:5; /**< [21-17] Tx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy15:5; /**< [15-11] Tx Mapping value of logical phy 3 */ + + unsigned int phy16:5; /**< [10-6] Tx Mapping value of logical phy 4 */ + + unsigned int phy17:5; /**< [5-1] Tx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utTxTransTable2; /**< Tx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxTransTable3_ + * @brief Utopia Tx translation table Register + */ + struct UtTxTransTable3_ + { + + unsigned int phy18:5; /**< [31-27] Tx Mapping value of logical phy 6 */ + + unsigned int phy19:5; /**< [26-22] Tx Mapping value of logical phy 7 */ + + unsigned int phy20:5; /**< [21-17] Tx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy21:5; /**< [15-11] Tx Mapping value of logical phy 3 */ + + unsigned int phy22:5; /**< [10-6] Tx Mapping value of logical phy 4 */ + + unsigned int phy23:5; /**< [5-1] Tx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utTxTransTable3; /**< Tx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxTransTable4_ + * @brief Utopia Tx translation table Register + */ + struct UtTxTransTable4_ + { + + unsigned int phy24:5; /**< [31-27] Tx Mapping value of logical phy 6 */ + + unsigned int phy25:5; /**< [26-22] Tx Mapping value of logical phy 7 */ + + unsigned int phy26:5; /**< [21-17] Tx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy27:5; /**< [15-11] Tx Mapping value of logical phy 3 */ + + unsigned int phy28:5; /**< [10-6] Tx Mapping value of logical phy 4 */ + + unsigned int phy29:5; /**< [5-1] Tx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utTxTransTable4; /**< Tx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxTransTable5_ + * @brief Utopia Tx translation table Register + */ + struct UtTxTransTable5_ + { + + unsigned int phy30:5; /**< [31-27] Tx Mapping value of logical phy 6 */ + + unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ + + } utTxTransTable5; /**< Tx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxConfig_ + * @brief Utopia Rx config Register + */ + struct UtRxConfig_ + { + + unsigned int rxInterface:1; /**< [31] Utopia Receive Interface. The following encoding is used + to set the Utopia Receive interface as ATM master or PHY slave: + @li 1 - PHY + @li 0 - ATM */ + + unsigned int rxMode:1; /**< [30] Utopia Receive Mode. The following encoding is used to set + the Utopia Receive mode to SPHY or MPHY: + @li 1 - SPHY + @li 0 - MPHY */ + + unsigned int rxOctet:1; /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia + cell transfer protocol to Octet-level handshaking. Note this is only + applicable in SPHY mode. + @li 1 - Octet-handshaking enabled + @li 0 - Cell-handshaking enabled */ + + unsigned int rxParity:1; /**< [28] Utopia Receive Parity Checking enable. + @li 1 - Parity checking enabled + @li 0 - Parity checking disabled */ + + unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode + @li 1 - Check for Even Parity + @li 0 - Check for Odd Parity.*/ + + unsigned int rxHEC:1; /**< [26] RxHEC Header Error Check Mode. Enables/disables cell header + error checking on the received cell header. + @li 1 - HEC checking enabled + @li 0 - HEC checking disabled */ + + unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55 + before being tested with the received HEC. + @li 1 - Enable HEC ExOR with value 0x55. + @li 0 - Use generated HEC value.*/ + + unsigned int rxHECpass:1; /**< [24] Specifies if the incoming cell HEC byte should be transferred + after optional processing to the NPE2 Coprocessor Bus Interface or + if it should be discarded. + @li 1 - HEC maintained 53-byte/UDC cell sent to NPE2. + @li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/ + + unsigned int reserved_1:1; /**< [23] These bits are always 0 */ + + unsigned int rxCellSize:7; /**< [22:16] Receive cell size. Configures the receive cell size. + Values between 52-64 are valid */ + + unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be + included in the Hash data input or if the bits should be padded + with 1'b0. + @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation. + @li 0 - VPI [11:8]/GFC field padded with 1'b0 */ + + unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the + incoming cell data should be pre-hashed to allow VPI/VCI header look-up + in a hash table. + @li 1 - Pre-hashing enabled + @li 0 - Pre-hashing disabled */ + + unsigned int reserved_2:1; /**< [13] These bits are always 0 */ + + unsigned int rxAddrRange:5; /**< [12:8] In ATM master, MPHY mode, + * this register specifies the upper + * limit of the PHY polling logical range. The number of active PHYs are + * RxAddrRange + 1. + */ + unsigned int reserved_3:3; /**< [7-5] These bits are always 0 .*/ + unsigned int rxPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register + * specifies the physical address of the PHY. + */ + } utRxConfig; /**< Rx config Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxStatsConfig_ + * @brief Utopia Rx stats config Register + */ + struct UtRxStatsConfig_ + { + + unsigned int vpi:12; /**< [31:20] ATM VPI VPI [11:0] OR GFC [3:0] and VPI [7:0] + @li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */ + + unsigned int vci:16; /**< [19:4] VCI [15:0] or PHY Address [4] */ + + unsigned int pti:3; /**< [3:1] PTI [2:0] or or PHY Address [3:1] + @li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test. + @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used + for statistics gathering.. */ + + unsigned int clp:1; /**< [0] CLP [0] or PHY Address [0] + @li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test. + @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used + for statistics gathering.. */ + } utRxStatsConfig; /**< Rx stats config Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxDefineIdle_ + * @brief Utopia Rx idle cells config Register + */ + struct UtRxDefineIdle_ + { + + unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] + @li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */ + + unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ + + unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] + @li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/ + + unsigned int clp:1; /**< [0] ATM CLP [0] + @li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/ + } utRxDefineIdle; /**< Rx idle cell config Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxEnableFields_ + * @brief Utopia Rx enable Register + */ + struct UtRxEnableFields_ + { + + unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC + field of the ATM header when testing for Idle cells. + @li 1 - GFC field is valid. + @li 0 - GFC field ignored.*/ + + unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI + field of the ATM header when testing for Idle cells. + @li 1 - PTI field is valid. + @li 0 - PTI field ignored.*/ + + unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP + field of the ATM header when testing for Idle cells. + @li 1 - CLP field is valid. + @li 0 - CLP field ignored.*/ + + unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics + gathering based on the specified PHY address as defined in RxStatsConfig + register. + @li 1 - Enable statistics for specified receive PHY address. + @li 0 - Disable statistics for specified receive PHY address.*/ + + unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics + gathering based on a specific VPI/VCI address. + @li 1 - Enable statistics for specified VPI/VCI address. + @li 0 - Disable statistics for specified VPI/VCI address.*/ + + unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field + of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only + available at the UNI and uses the first 4-bits of the VPI field. + @li 1 - GFC field is valid. + @li 0 - GFC field ignored. */ + + unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field + of the ATM header when ATM VPI/VCI statistics are enabled. + @li 1 - PTI field is valid. + @li 0 - PTI field ignored.*/ + + unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field + of the ATM header when ATM VPI/VCI statistics are enabled. + @li 1 - CLP field is valid. + @li 0 - CLP field ignored. */ + + unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC. + @li 1 - Discard cells with HEC errors + @li 0 - Cells with HEC errors are passed */ + + unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors. + @li 1 - Discard cells with parity errors + @li 0 - Cells with parity errors are passed */ + + unsigned int discardIdle:1; /**< [21] Discard Idle Cells based on DefineIdle register values + @li 1 - Discard IDLE cells + @li 0 - IDLE cells passed */ + + unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count. + @li 1 - Enable count of received cells containing HEC errors + @li 0 - No count is maintained. */ + + unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count + @li 1 - Enable count of received cells containing Parity errors + @li 0 - No count is maintained. */ + + unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count. + @li 1 - Enable count of Idle cells received. + @li 0 - No count is maintained.*/ + + unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count. + @li 1 - Enable count of received cells of incorrect size + @li 0 - No count is maintained. */ + + unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells. + @li 1 - Enable count of valid cells received - non-idle/non-error + @li 0 - No count is maintained. */ + + unsigned int reserved_1:3; /**< [15:13] These bits are always 0 */ + + unsigned int rxCellOvrInt:1; /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount + register overflows. + @li 1 - CBI Receive Status asserted. + @li 0 - No CBI Receive Status asserted.*/ + + unsigned int invalidHecOvrInt:1; /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount + register overflows. + @li 1 - CBI Receive Condition asserted. + @li 0 - No CBI Receive Condition asserted */ + + unsigned int invalidParOvrInt:1; /**< [10] Enable CBI Receive Status Condition if the InvalidParCount + register overflows + @li 1 - CBI Receive Condition asserted. + @li 0 - No CBI Receive Condition asserted */ + + unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount + register overflows. + @li 1 - CBI Receive Status Condition asserted. + @li 0 - No CBI Receive Status asserted */ + + unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows. + @li 1 - CBI Receive Condition asserted. + @li 0 - No CBI Receive Condition asserted */ + + unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */ + + unsigned int rxAddrMask:5; /**< [4:0] This register is used as a mask to allow the user to increase + the PHY receive address range. The register should be programmed with + the address-range limit, i.e. if set to 0x3 the address range increases + to a maximum of 4 addresses. */ + } utRxEnableFields; /**< Rx enable Utopia register */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxTransTable0_ + * @brief Utopia Rx translation table Register + */ + struct UtRxTransTable0_ + { + + unsigned int phy0:5; /**< [31-27] Rx Mapping value of logical phy 0 */ + + unsigned int phy1:5; /**< [26-22] Rx Mapping value of logical phy 1 */ + + unsigned int phy2:5; /**< [21-17] Rx Mapping value of logical phy 2 */ + + unsigned int reserved_1:1; /**< [16] These bits are always 0 */ + + unsigned int phy3:5; /**< [15-11] Rx Mapping value of logical phy 3 */ + + unsigned int phy4:5; /**< [10-6] Rx Mapping value of logical phy 4 */ + + unsigned int phy5:5; /**< [5-1] Rx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } + + utRxTransTable0; /**< Rx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxTransTable1_ + * @brief Utopia Rx translation table Register + */ + struct UtRxTransTable1_ + { + + unsigned int phy6:5; /**< [31-27] Rx Mapping value of logical phy 6 */ + + unsigned int phy7:5; /**< [26-22] Rx Mapping value of logical phy 7 */ + + unsigned int phy8:5; /**< [21-17] Rx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy9:5; /**< [15-11] Rx Mapping value of logical phy 3 */ + + unsigned int phy10:5; /**< [10-6] Rx Mapping value of logical phy 4 */ + + unsigned int phy11:5; /**< [5-1] Rx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } + + utRxTransTable1; /**< Rx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxTransTable2_ + * @brief Utopia Rx translation table Register + */ + struct UtRxTransTable2_ + { + + unsigned int phy12:5; /**< [31-27] Rx Mapping value of logical phy 6 */ + + unsigned int phy13:5; /**< [26-22] Rx Mapping value of logical phy 7 */ + + unsigned int phy14:5; /**< [21-17] Rx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy15:5; /**< [15-11] Rx Mapping value of logical phy 3 */ + + unsigned int phy16:5; /**< [10-6] Rx Mapping value of logical phy 4 */ + + unsigned int phy17:5; /**< [5-1] Rx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utRxTransTable2; /**< Rx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxTransTable3_ + * @brief Utopia Rx translation table Register + */ + struct UtRxTransTable3_ + { + + unsigned int phy18:5; /**< [31-27] Rx Mapping value of logical phy 6 */ + + unsigned int phy19:5; /**< [26-22] Rx Mapping value of logical phy 7 */ + + unsigned int phy20:5; /**< [21-17] Rx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy21:5; /**< [15-11] Rx Mapping value of logical phy 3 */ + + unsigned int phy22:5; /**< [10-6] Rx Mapping value of logical phy 4 */ + + unsigned int phy23:5; /**< [5-1] Rx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utRxTransTable3; /**< Rx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxTransTable4_ + * @brief Utopia Rx translation table Register + */ + struct UtRxTransTable4_ + { + + unsigned int phy24:5; /**< [31-27] Rx Mapping value of logical phy 6 */ + + unsigned int phy25:5; /**< [26-22] Rx Mapping value of logical phy 7 */ + + unsigned int phy26:5; /**< [21-17] Rx Mapping value of logical phy 8 */ + + unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ + + unsigned int phy27:5; /**< [15-11] Rx Mapping value of logical phy 3 */ + + unsigned int phy28:5; /**< [10-6] Rx Mapping value of logical phy 4 */ + + unsigned int phy29:5; /**< [5-1] Rx Mapping value of logical phy 5 */ + + unsigned int reserved_2:1; /**< [0] These bits are always 0 */ + } utRxTransTable4; /**< Rx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxTransTable5_ + * @brief Utopia Rx translation table Register + */ + struct UtRxTransTable5_ + { + + unsigned int phy30:5; /**< [31-27] Rx Mapping value of logical phy 6 */ + + unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ + + } utRxTransTable5; /**< Rx translation table */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtSysConfig_ + * @brief NPE setup Register + */ + struct UtSysConfig_ + { + + unsigned int reserved_1:2; /**< [31-30] These bits are always 0 */ + unsigned int txEnbFSM:1; /**< [29] Enables the operation ofthe Utopia Transmit FSM + * @li 1 - FSM enabled + * @li 0 - FSM inactive + */ + unsigned int rxEnbFSM:1; /**< [28] Enables the operation ofthe Utopia Revieve FSM + * @li 1 - FSM enabled + * @li 0 - FSM inactive + */ + unsigned int disablePins:1; /**< [27] Disable Utopia interface I/O pins forcing the signals to an + * inactive state. Note that this bit is set on reset and must be + * de-asserted + * @li 0 - Normal data transfer + * @li 1 - Utopia interface pins are forced inactive + */ + unsigned int tstLoop:1; /**< [26] Test Loop Back Enable. + * @li Note: For loop back to function RxMode and Tx Mode must both be set + * to single PHY mode. + * @li 0 - Loop back + * @li 1 - Normal operating mode + */ + + unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state. + * @li Note: All transmit configuration and status registers will be reset + * to their reset values. + * @li 0 - Normal operating mode + * @li 1 - Reset transmit modules + */ + + unsigned int rxReset:1; /**< [24] Resets the Utopia Coprocessor receive module to a known state. + * @li Note: All receive configuration and status registers will be reset + * to their reset values. + * @li 0 - Normal operating mode + * @li 1 - Reset receive modules + */ + + unsigned int reserved_2:24; /**< [23-0] These bits are always 0 */ + } utSysConfig; /**< NPE debug config */ + +} +IxAtmdAccUtopiaConfig; + +/** +* +* @brief Utopia status +* +* This structure is used to set/get the Utopia status parameters +* @li contains debug cell counters, to be accessed during a read operation +* +* @note - the exact description of all parameters is done in the Utopia reference +* documents. +* +*/ +typedef struct +{ + + unsigned int utTxCellCount; /**< count of cells transmitted */ + + unsigned int utTxIdleCellCount; /**< count of idle cells transmitted */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtTxCellConditionStatus_ + * @brief Utopia Tx Status Register + */ + struct UtTxCellConditionStatus_ + { + + unsigned int reserved_1:2; /**< [31:30] These bits are always 0 */ + unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte + * Transmit FIFO2 indicates a FIFO underflow + * error condition. + */ + unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if + * 64-byte Transmit FIFO1 indicates a FIFO + * underflow error condition. + */ + unsigned int txFIFO2Overflow:1; /**< [27] This bit is set if 64-byte + * Transmit FIFO2 indicates a FIFO overflow + * error condition. + */ + unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte + * Transmit FIFO1 indicates a FIFO overflow + * error condition. + */ + unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the + * TxIdleCellCount register overflows. + */ + unsigned int txCellCountOvr:1; /**< [24] This bit is set if the + * TxCellCount register overflows + */ + unsigned int reserved_2:24; /**< [23:0] These bits are always 0 */ + } utTxCellConditionStatus; /**< Tx cells condition status */ + + unsigned int utRxCellCount; /**< count of cell received */ + unsigned int utRxIdleCellCount; /**< count of idle cell received */ + unsigned int utRxInvalidHECount; /**< count of invalid cell + * received because of HEC errors + */ + unsigned int utRxInvalidParCount; /**< count of invalid cell received + * because of parity errors + */ + unsigned int utRxInvalidSizeCount; /**< count of invalid cell + * received because of cell + * size errors + */ + + /** + * @ingroup IxAtmdAccUtopiaCtrlAPI + * @struct UtRxCellConditionStatus_ + * @brief Utopia Rx Status Register + */ + struct UtRxCellConditionStatus_ + { + + unsigned int reserved_1:3; /**< [31:29] These bits are always 0.*/ + unsigned int rxCellCountOvr:1; /**< [28] This bit is set if the RxCellCount register overflows. */ + unsigned int invalidHecCountOvr:1; /**< [27] This bit is set if the InvalidHecCount register overflows.*/ + unsigned int invalidParCountOvr:1; /**< [26] This bit is set if the InvalidParCount register overflows.*/ + unsigned int invalidSizeCountOvr:1; /**< [25] This bit is set if the InvalidSizeCount register overflows.*/ + unsigned int rxIdleCountOvr:1; /**< [24] This bit is set if the RxIdleCount register overflows.*/ + unsigned int reserved_2:4; /**< [23:20] These bits are always 0 */ + unsigned int rxFIFO2Underflow:1; /**< [19] This bit is set if 64-byte Receive FIFO2 + * indicates a FIFO underflow error condition. + */ + unsigned int rxFIFO1Underflow:1; /**< [18] This bit is set if 64-byte Receive + * FIFO1 indicates a FIFO underflow error condition + . */ + unsigned int rxFIFO2Overflow:1; /**< [17] This bit is set if 64-byte Receive FIFO2 + * indicates a FIFO overflow error condition. + */ + unsigned int rxFIFO1Overflow:1; /**< [16] This bit is set if 64-byte Receive FIFO1 + * indicates a FIFO overflow error condition. + */ + unsigned int reserved_3:16; /**< [15:0] These bits are always 0. */ + } utRxCellConditionStatus; /**< Rx cells condition status */ + +} IxAtmdAccUtopiaStatus; + +/** + * @} defgroup IxAtmdAccUtopiaCtrlAPI + */ + + /** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * + ixAtmdAccUtopiaConfigPtr) + * + * @brief Send the configuration structure to the Utopia interface + * + * This function downloads the @a IxAtmdAccUtopiaConfig structure to + * the Utopia and has the following effects + * @li setup the Utopia interface + * @li initialise the NPE + * @li reset the Utopia cell counters and status registers to known values + * + * This action has to be done once at initialisation. A lock is preventing + * the concurrent use of @a ixAtmdAccUtopiaStatusGet() and + * @A ixAtmdAccUtopiaConfigSet() + * + * @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to + * Utopia. This parameter cannot be a null pointer. + * + * @return @li IX_SUCCESS successful download + * @return @li IX_FAIL error in the parameters, or configuration is not + * complete or failed + * + * @sa ixAtmdAccUtopiaStatusGet + * + */ +PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * + ixAtmdAccUtopiaConfigPtr); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * + ixAtmdAccUtopiaStatus) + * + * @brief Get the Utopia interface configuration. + * + * This function reads the Utopia registers and the Cell counts + * and fills the @a IxAtmdAccUtopiaStatus structure + * + * A lock is preventing the concurrent + * use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet() + * + * @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal + * hardware counters. This parameter cannot be a NULL pointer. + * + * @return @li IX_SUCCESS successful read + * @return @li IX_FAIL error in the parameters null pointer, or + * configuration read is not complete or failed + * + * @sa ixAtmdAccUtopiaConfigSet + * + */ +PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * + ixAtmdAccUtopiaStatus); + +/** + * + * @ingroup IxAtmdAcc + * + * @fn ixAtmdAccPortEnable (IxAtmLogicalPort port) + * + * @brief enable a PHY logical port + * + * This function enables the transmission over one port. It should be + * called before accessing any resource from this port and before the + * establishment of a VC. + * + * When a port is enabled, the cell transmission to the Utopia interface + * is started. If there is no traffic already running, idle cells are + * sent over the interface. + * + * This function can be called multiple times. + * + * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * + * @return @li IX_SUCCESS enable is complete + * @return @li IX_ATMDACC_WARNING port already enabled + * @return @li IX_FAIL enable failed, wrong parameter, or cannot + * initialise this port (the port is maybe already in use, + * or there is a hardware issue) + * + * @note - This function needs internal locks and should not be + * called from an interrupt context + * + * @sa ixAtmdAccPortDisable + * + */ +PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port); + +/** + * + * @ingroup IxAtmdAccCtrlAPI + * + * @fn ixAtmdAccPortDisable (IxAtmLogicalPort port) + * + * @brief disable a PHY logical port + * + * This function disable the transmission over one port. + * + * When a port is disabled, the cell transmission to the Utopia interface + * is stopped. + * + * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] + * + * @return @li IX_SUCCESS disable is complete + * @return @li IX_ATMDACC_WARNING port already disabled + * @return @li IX_FAIL disable failed, wrong parameter . + * + * @note - This function needs internal locks and should not be called + * from an interrupt context + * + * @note - The response from hardware is done through the txDone mechanism + * to ensure the synchrnisation with tx resources. Therefore, the + * txDone mechanism needs to be serviced to make a PortDisable complete. + * + * @sa ixAtmdAccPortEnable + * @sa ixAtmdAccPortDisableComplete + * @sa ixAtmdAccTxDoneDispatch + * + */ +PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port); + +/** +* +* @ingroup IxAtmdAccCtrlAPI +* +* @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port) +* +* @brief disable a PHY logical port +* +* This function indicates if the port disable for a port has completed. This +* function will return TRUE if the port has never been enabled. +* +* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] +* +* @return @li TRUE disable is complete +* @return @li FALSE disable failed, wrong parameter . +* +* @note - This function needs internal locks and should not be called +* from an interrupt context +* +* @sa ixAtmdAccPortEnable +* @sa ixAtmdAccPortDisable +* +*/ +PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port); + +#endif /* IXATMDACCCTRL_H */ + +/** + * @} defgroup IxAtmdAccCtrlAPI + */ + + diff --git a/drivers/net/npe/include/IxAtmm.h b/drivers/net/npe/include/IxAtmm.h new file mode 100644 index 0000000000..fcf523fca4 --- /dev/null +++ b/drivers/net/npe/include/IxAtmm.h @@ -0,0 +1,795 @@ +/** + * @file IxAtmm.h + * + * @date 3-DEC-2001 + * + * @brief Header file for the IXP400 ATM Manager component (IxAtmm) + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +/** + * @defgroup IxAtmm IXP400 ATM Manager (IxAtmm) API + * + * @brief IXP400 ATM Manager component Public API + * + * @{ + */ + +#ifndef IXATMM_H +#define IXATMM_H + +/* + * Put the user defined include files required + */ +#include "IxAtmSch.h" +#include "IxOsalTypes.h" + +/* + * #defines and macros used in this file. + */ + +/** + * @def IX_ATMM_RET_ALREADY_INITIALIZED + * + * @brief Component has already been initialized + */ +#define IX_ATMM_RET_ALREADY_INITIALIZED 2 + +/** + * @def IX_ATMM_RET_INVALID_PORT + * + * @brief Specified port does not exist or is out of range */ +#define IX_ATMM_RET_INVALID_PORT 3 + +/** + * @def IX_ATMM_RET_INVALID_VC_DESCRIPTOR + * + * @brief The VC description does not adhere to ATM standards */ +#define IX_ATMM_RET_INVALID_VC_DESCRIPTOR 4 + +/** + * @def IX_ATMM_RET_VC_CONFLICT + * + * @brief The VPI/VCI values supplied are either reserved, or they + * conflict with a previously registered VC on this port */ +#define IX_ATMM_RET_VC_CONFLICT 5 + +/** + * @def IX_ATMM_RET_PORT_CAPACITY_IS_FULL + * + * @brief The virtual connection cannot be established on the port + * because the remaining port capacity is not sufficient to + * support it */ +#define IX_ATMM_RET_PORT_CAPACITY_IS_FULL 6 + +/** + * @def IX_ATMM_RET_NO_SUCH_VC + * + * @brief No registered VC, as described by the supplied VCI/VPI or + * VC identifier values, exists on this port */ +#define IX_ATMM_RET_NO_SUCH_VC 7 + +/** + * @def IX_ATMM_RET_INVALID_VC_ID + * + * @brief The specified VC identifier is out of range. */ +#define IX_ATMM_RET_INVALID_VC_ID 8 + +/** + * @def IX_ATMM_RET_INVALID_PARAM_PTR + * + * @brief A pointer parameter was NULL. */ +#define IX_ATMM_RET_INVALID_PARAM_PTR 9 + +/** + * @def IX_ATMM_UTOPIA_SPHY_ADDR + * + * @brief The phy address when in SPHY mode */ +#define IX_ATMM_UTOPIA_SPHY_ADDR 31 + +/** + * @def IX_ATMM_THREAD_PRI_HIGH + * + * @brief The value of high priority thread */ +#define IX_ATMM_THREAD_PRI_HIGH 90 + +/* + * Typedefs whose scope is limited to this file. + */ + +/** @brief Definition for use in the @ref IxAtmmVc structure. + * Indicates the direction of a VC */ +typedef enum +{ + IX_ATMM_VC_DIRECTION_TX=0, /**< Atmm Vc direction transmit*/ + IX_ATMM_VC_DIRECTION_RX, /**< Atmm Vc direction receive*/ + IX_ATMM_VC_DIRECTION_INVALID /**< Atmm Vc direction invalid*/ +} IxAtmmVcDirection; + +/** @brief Definition for use with @ref IxAtmmVcChangeCallback + * callback. Indicates that the event type represented by the + * callback for this VC. */ +typedef enum +{ + IX_ATMM_VC_CHANGE_EVENT_REGISTER=0, /**< Atmm Vc event register*/ + IX_ATMM_VC_CHANGE_EVENT_DEREGISTER, /**< Atmm Vc event de-register*/ + IX_ATMM_VC_CHANGE_EVENT_INVALID /**< Atmm Vc event invalid*/ +} IxAtmmVcChangeEvent; + +/** @brief Definitions for use with @ref ixAtmmUTOPIAInit interface to + * indicate that UTOPIA loopback should be enabled or disabled + * on initialisation. */ +typedef enum +{ + IX_ATMM_UTOPIA_LOOPBACK_DISABLED=0, /**< Atmm Utopia loopback mode disabled*/ + IX_ATMM_UTOPIA_LOOPBACK_ENABLED, /**< Atmm Utopia loopback mode enabled*/ + IX_ATMM_UTOPIA_LOOPBACK_INVALID /**< Atmm Utopia loopback mode invalid*/ +} IxAtmmUtopiaLoopbackMode; + +/** @brief This structure describes the required attributes of a + * virtual connection. +*/ +typedef struct { + unsigned vpi; /**< VPI value of this virtual connection */ + unsigned vci; /**< VCI value of this virtual connection. */ + IxAtmmVcDirection direction; /**< VC direction */ + + /** Traffic descriptor of this virtual connection. This structure + * is defined by the @ref IxAtmSch component. */ + IxAtmTrafficDescriptor trafficDesc; +} IxAtmmVc; + + +/** @brief Definitions for use with @ref ixAtmmUtopiaInit interface to + * indicate that UTOPIA multi-phy/single-phy mode is used. + */ +typedef enum +{ + IX_ATMM_MPHY_MODE = 0, /**< Atmm phy mode mphy*/ + IX_ATMM_SPHY_MODE, /**< Atmm phy mode sphy*/ + IX_ATMM_PHY_MODE_INVALID /**< Atmm phy mode invalid*/ +} IxAtmmPhyMode; + + +/** @brief Structure contains port-specific information required to + * initialize IxAtmm, and specifically, the IXP400 UTOPIA + * Level-2 device. */ +typedef struct { + unsigned reserved_1:11; /**< [31:21] Should be zero */ + unsigned UtopiaTxPhyAddr:5; /**< [20:16] Address of the + * transmit (Tx) PHY for this + * port on the 5-bit UTOPIA + * Level-2 address bus */ + unsigned reserved_2:11; /**< [15:5] Should be zero */ + unsigned UtopiaRxPhyAddr:5; /**< [4:0] Address of the receive + * (Rx) PHY for this port on the + * 5-bit UTOPIA Level-2 + * address bus */ +} IxAtmmPortCfg; + +/** @brief Callback type used with @ref ixAtmmVcChangeCallbackRegister interface + * Defines a callback type which will be used to notify registered + * users of registration/deregistration events on a particular port + * + * @param eventType @ref IxAtmmVcChangeEvent [in] - Event indicating + * whether the VC supplied has been added or + * removed + * + * @param port @ref IxAtmLogicalPort [in] - Specifies the port on which the event has + * occurred + * + * @param vcChanged @ref IxAtmmVc* [in] - Pointer to a structure which gives + * details of the VC which has been added + * or removed on the port + */ +typedef void (*IxAtmmVcChangeCallback) (IxAtmmVcChangeEvent eventType, + IxAtmLogicalPort port, + const IxAtmmVc* vcChanged); + +/* + * Variable declarations global to this file only. Externs are followed by + * static variables. + */ + +/* + * Extern function prototypes + */ + +/* + * Function declarations + */ + + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmInit (void) + * + * @brief Interface to initialize the IxAtmm software component. Can + * be called once only. + * + * Must be called before any other IxAtmm API is called. + * + * @param "none" + * + * @return @li IX_SUCCESS : IxAtmm has been successfully initialized. + * Calls to other IxAtmm interfaces may now be performed. + * @return @li IX_FAIL : IxAtmm has already been initialized. + */ +PUBLIC IX_STATUS +ixAtmmInit (void); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmUtopiaInit (unsigned numPorts, + IxAtmmPhyMode phyMode, + IxAtmmPortCfg portCfgs[], + IxAtmmUtopiaLoopbackMode loopbackMode) + * + * @brief Interface to initialize the UTOPIA Level-2 ATM coprocessor + * for the specified number of physical ports. The function + * must be called before the ixAtmmPortInitialize interface + * can operate successfully. + * + * @param numPorts unsigned [in] - Indicates the total number of logical + * ports that are active on the device. Up to 12 ports are + * supported. + * + * @param phyMode @ref IxAtmmPhyMode [in] - Put the Utopia coprocessor in SPHY + * or MPHY mode. + * + * @param portCfgs[] @ref IxAtmmPortCfg [in] - Pointer to an array of elements + * detailing the UTOPIA specific port characteristics. The + * length of the array must be equal to the number of ports + * activated. ATM ports are referred to by the relevant + * offset in this array in all subsequent IxAtmm interface + * calls. + * + * @param loopbackMode @ref IxAtmmUtopiaLoopbackMode [in] - Value must be one of + * @ref IX_ATMM_UTOPIA_LOOPBACK_ENABLED or @ref + * IX_ATMM_UTOPIA_LOOPBACK_DISABLED indicating whether + * loopback should be enabled on the device. Loopback can + * only be supported on a single PHY, therefore the numPorts + * parameter must be 1 if loopback is enabled. + * + * @return @li IX_SUCCESS : Indicates that the UTOPIA device has been + * successfully initialized for the supplied ports. + * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : The UTOPIA device has + * already been initialized. + * @return @li IX_FAIL : The supplied parameters are invalid or have been + * rejected by the UTOPIA-NPE device. + * + * @warning + * This interface may only be called once. + * Port identifiers are assumed to range from 0 to (numPorts - 1) in all + * instances. + * In all subsequent calls to interfaces supplied by IxAtmm, the specified + * port value is expected to represent the offset in the portCfgs array + * specified in this interface. i.e. The first port in this array will + * subsequently be represented as port 0, the second port as port 1, + * and so on.*/ +PUBLIC IX_STATUS +ixAtmmUtopiaInit (unsigned numPorts, + IxAtmmPhyMode phyMode, + IxAtmmPortCfg portCfgs[], + IxAtmmUtopiaLoopbackMode loopbackMode); + + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmPortInitialize (IxAtmLogicalPort port, + unsigned txPortRate, + unsigned rxPortRate) + * + * @brief The interface is called following @ref ixAtmmUtopiaInit () + * and before calls to any other IxAtmm interface. It serves + * to activate the registered ATM port with IxAtmm. + * + * The transmit and receive port rates are specified in bits per + * second. This translates to ATM cells per second according to the + * following formula: CellsPerSecond = portRate / (53*8) The + * IXP400 device supports only 53 byte cells. The client shall make + * sure that the off-chip physical layer device has already been + * initialized. + * + * IxAtmm will configure IxAtmdAcc and IxAtmSch to enable scheduling + * on the port. + * + * This interface must be called once for each active port in the + * system. The first time the interface is invoked, it will configure + * the mechanism by which the handling of transmit, transmit-done and + * receive are driven with the IxAtmdAcc component. + * + * This function is reentrant. + * + * @note The minimum tx rate that will be accepted is 424 bit/s which equates + * to 1 cell (53 bytes) per second. + * + * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be + * initialized. + * + * @param txPortRate unsigned [in] - Value specifies the + * transmit port rate for this port in + * bits/second. This value is used by the ATM Scheduler + * component is evaluating VC access requests for the port. + * + * @param rxPortRate unsigned [in] - Value specifies the + * receive port rate for this port in bits/second. + * + * @return @li IX_SUCCESS : The specificed ATM port has been successfully + * initialized. IxAtmm is ready to accept VC registrations on + * this port. + * + * @return @li IX_ATMM_RET_ALREADY_INITIALIZED : ixAtmmPortInitialize has + * already been called successfully on this port. The current + * call is rejected. + * + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid. The request is rejected. + * + * @return @li IX_FAIL : IxAtmm could not initialize the port because the + * inputs are not understood. + * + * @sa ixAtmmPortEnable, ixAtmmPortDisable + * + */ +PUBLIC IX_STATUS +ixAtmmPortInitialize (IxAtmLogicalPort port, + unsigned txPortRate, + unsigned rxPortRate); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmPortModify (IxAtmLogicalPort port, + unsigned txPortRate, + unsigned rxPortRate) + * + * @brief A client may call this interface to change the existing + * port rate (expressed in bits/second) on an established ATM + * port. + * + * @param port @ref IxAtmLogicalPort [in] - Identifies the port which is to be + * initialized. + * + * @param txPortRate unsigned [in] - Value specifies the`` + * transmit port rate for this port in + * bits/second. This value is used by the ATM Scheduler + * component is evaluating VC access requests for the port. + * + * @param rxPortRate unsigned [in] - Value specifies the + * receive port rate for this port in + * bits/second. + * + * @return @li IX_SUCCESS : The indicated ATM port rates have been + * successfully modified. + * + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid. The request is rejected. + * + * @return @li IX_FAIL : IxAtmm could not update the port because the + * inputs are not understood, or the interface was called before + * the port was initialized. */ +PUBLIC IX_STATUS +ixAtmmPortModify (IxAtmLogicalPort port, + unsigned txPortRate, + unsigned rxPortRate); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmPortQuery (IxAtmLogicalPort port, + unsigned *txPortRate, + unsigned *rxPortRate); + + * + * @brief The client may call this interface to request details on + * currently registered transmit and receive rates for an ATM + * port. + * + * @param port @ref IxAtmLogicalPort [in] - Value identifies the port from which the + * rate details are requested. + * + * @param *txPortRate unsigned [out] - Pointer to a value + * which will be filled with the value of the transmit port + * rate specified in bits/second. + * + * @param *rxPortRate unsigned [out] - Pointer to a value + * which will be filled with the value of the receive port + * rate specified in bits/second. + * + * @return @li IX_SUCCESS : The information requested on the specified + * port has been successfully supplied in the output. + * + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid. The request is rejected. + * + * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was + * NULL. + * + * @return @li IX_FAIL : IxAtmm could not update the port because the + * inputs are not understood, or the interface was called before + * the port was initialized. */ +PUBLIC IX_STATUS +ixAtmmPortQuery (IxAtmLogicalPort port, + unsigned *txPortRate, + unsigned *rxPortRate); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmPortEnable(IxAtmLogicalPort port) + * + * @brief The client call this interface to enable transmit for an ATM + * port. At initialisation, all the ports are disabled. + * + * @param port @ref IxAtmLogicalPort [in] - Value identifies the port + * + * @return @li IX_SUCCESS : Transmission over this port is started. + * + * @return @li IX_FAIL : The port parameter is not valid, or the + * port is already enabled + * + * @note - When a port is disabled, Rx and Tx VC Connect requests will fail + * + * @note - This function uses system resources and should not be used + * inside an interrupt context. + * + * @sa ixAtmmPortDisable */ +PUBLIC IX_STATUS +ixAtmmPortEnable(IxAtmLogicalPort port); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmPortDisable(IxAtmLogicalPort port) + * + * @brief The client call this interface to disable transmit for an ATM + * port. At initialisation, all the ports are disabled. + * + * @param port @ref IxAtmLogicalPort [in] - Value identifies the port + * + * @return @li IX_SUCCESS : Transmission over this port is stopped. + * + * @return @li IX_FAIL : The port parameter is not valid, or the + * port is already disabled + * + * @note - When a port is disabled, Rx and Tx VC Connect requests will fail + * + * @note - This function call does not stop RX traffic. It is supposed + * that this function is invoked when a serious problem + * is detected (e.g. physical layer broken). Then, the RX traffic + * is not passing. + * + * @note - This function is blocking until the hw acknowledge that the + * transmission is stopped. + * + * @note - This function uses system resources and should not be used + * inside an interrupt context. + * + * @sa ixAtmmPortEnable */ +PUBLIC IX_STATUS +ixAtmmPortDisable(IxAtmLogicalPort port); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmVcRegister (IxAtmLogicalPort port, + IxAtmmVc *vcToAdd, + IxAtmSchedulerVcId *vcId) + * + * @brief This interface is used to register an ATM Virtual + * Connection on the specified ATM port. + * + * Each call to this interface registers a unidirectional virtual + * connection with the parameters specified. If a bi-directional VC + * is needed, the function should be called twice (once for each + * direction, Tx & Rx) where the VPI and VCI and port parameters in + * each call are identical. + * + * With the addition of each new VC to a port, a series of + * callback functions are invoked by the IxAtmm component to notify + * possible external components of the change. The callback functions + * are registered using the @ref ixAtmmVcChangeCallbackRegister interface. + * + * The IxAtmSch component is notified of the registration of transmit + * VCs. + * + * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the specified VC is + * to be registered. + * + * @param *vcToAdd @ref IxAtmmVc [in] - Pointer to an @ref IxAtmmVc structure + * containing a description of the VC to be registered. The + * client shall fill the vpi, vci and direction and relevant + * trafficDesc members of this structure before calling this + * function. + * + * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which is filled + * with the per-port unique identifier value for this VC. + * This identifier will be required when a request is + * made to deregister or change this VC. VC identifiers + * for transmit VCs will have a value between 0-43, + * i.e. 32 data Tx VCs + 12 OAM Tx Port VCs. + * Receive VCs will have a value between 44-66, + * i.e. 32 data Rx VCs + 1 OAM Rx VC. + * + * @return @li IX_SUCCESS : The VC has been successfully registered on + * this port. The VC is ready for a client to configure IxAtmdAcc + * for receive and transmit operations on the VC. + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid or has not been initialized. The request + * is rejected. + * @return @li IX_ATMM_RET_INVALID_VC_DESCRIPTOR : The descriptor + * pointed to by vcToAdd is invalid. The registration request + * is rejected. + * @return @li IX_ATMM_RET_VC_CONFLICT : The VC requested conflicts with + * reserved VPI and/or VCI values or with another VC already activated + * on this port. + * @return @li IX_ATMM_RET_PORT_CAPACITY_IS_FULL : The VC cannot be + * registered in the port becuase the port capacity is + * insufficient to support the requested ATM traffic contract. + * The registration request is rejected. + * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was + * NULL. + * + * @warning IxAtmm has no capability of signaling or negotiating a virtual + * connection. Negotiation of the admission of the VC to the network + * is beyond the scope of this function. This is assumed to be + * performed by the calling client, if appropriate, + * before or after this function is called. + */ +PUBLIC IX_STATUS +ixAtmmVcRegister (IxAtmLogicalPort port, + IxAtmmVc *vcToAdd, + IxAtmSchedulerVcId *vcId); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId) + * + * @brief Function called by a client to deregister a VC from the + * system. + * + * With the removal of each new VC from a port, a series of + * registered callback functions are invoked by the IxAtmm component + * to notify possible external components of the change. The callback + * functions are registered using the @ref ixAtmmVcChangeCallbackRegister. + * + * The IxAtmSch component is notified of the removal of transmit VCs. + * + * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be + * removed is currently registered. + * + * @param vcId @ref IxAtmSchedulerVcId [in] - VC identifier value of the VC to + * be deregistered. This value was supplied to the client when + the VC was originally registered. This value can also be + queried from the IxAtmm component through the @ref ixAtmmVcQuery + * interface. + * + * @return @li IX_SUCCESS : The specified VC has been successfully + * removed from this port. + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid or has not been initialized. The request + * is rejected. + * @return @li IX_FAIL : There is no registered VC associated with the + * supplied identifier registered on this port. */ +PUBLIC IX_STATUS +ixAtmmVcDeregister (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmVcQuery (IxAtmLogicalPort port, + unsigned vpi, + unsigned vci, + IxAtmmVcDirection direction, + IxAtmSchedulerVcId *vcId, + IxAtmmVc *vcDesc) + * + * @brief This interface supplies information about an active VC on a + * particular port when supplied with the VPI, VCI and + * direction of that VC. + * + * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be + * queried is currently registered. + * + * @param vpi unsigned [in] - ATM VPI value of the requested VC. + * + * @param vci unsigned [in] - ATM VCI value of the requested VC. + * + * @param direction @ref IxAtmmVcDirection [in] - One of @ref + * IX_ATMM_VC_DIRECTION_TX or @ref IX_ATMM_VC_DIRECTION_RX + * indicating the direction (Tx or Rx) of the requested VC. + * + * @param *vcId @ref IxAtmSchedulerVcId [out] - Pointer to an integer value which will be + * filled with the VC identifier value for the requested + * VC (as returned by @ref ixAtmmVcRegister), if it + * exists on this port. + * + * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure + * which will be filled with the specific details of the + * requested VC, if it exists on this port. + * + * @return @li IX_SUCCESS : The specified VC has been found on this port + * and the requested details have been returned. + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid or has not been initialized. The request + * is rejected. + * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified + * port which matches the search criteria (VPI, VCI, direction) + * given. No data is returned. + * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was + * NULL. + * + */ +PUBLIC IX_STATUS +ixAtmmVcQuery (IxAtmLogicalPort port, + unsigned vpi, + unsigned vci, + IxAtmmVcDirection direction, + IxAtmSchedulerVcId *vcId, + IxAtmmVc *vcDesc); + + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc) + * + * @brief This interface supplies information about an active VC on a + * particular port when supplied with a vcId for that VC. + * + * @param port @ref IxAtmLogicalPort [in] - Identifies port on which the VC to be + * queried is currently registered. + * + * @param vcId @ref IxAtmSchedulerVcId [in] - Value returned by @ref ixAtmmVcRegister which + * uniquely identifies the requested VC on this port. + * + * @param *vcDesc @ref IxAtmmVc [out] - Pointer to an @ref IxAtmmVc structure + * which will be filled with the specific details of the + * requested VC, if it exists on this port. + * + * @return @li IX_SUCCESS : The specified VC has been found on this port + * and the requested details have been returned. + * @return @li IX_ATMM_RET_INVALID_PORT : The port value indicated in the + * input is not valid or has not been initialized. The request + * is rejected. + * @return @li IX_ATMM_RET_NO_SUCH_VC : No VC exists on the specified + * port which matches the supplied identifier. No data is + * returned. + * @return @li IX_ATMM_RET_INVALID_PARAM_PTR : A pointer parameter was + * NULL. + */ +PUBLIC IX_STATUS +ixAtmmVcIdQuery (IxAtmLogicalPort port, IxAtmSchedulerVcId vcId, IxAtmmVc *vcDesc); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback) + * + * @brief This interface is invoked to supply a function to IxAtmm + * which will be called to notify the client if a new VC is + * registered with IxAtmm or an existing VC is removed. + * + * The callback, when invoked, will run within the context of the call + * to @ref ixAtmmVcRegister or @ref ixAtmmVcDeregister which caused + * the change of state. + * + * A maximum of 32 calbacks may be registered in with IxAtmm. + * + * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies + * with the @ref IxAtmmVcChangeCallback definition. This + * function will be invoked by IxAtmm with the appropiate + * parameters for the relevant VC when any VC has been + * registered or deregistered with IxAtmm. + * + * @return @li IX_SUCCESS : The specified callback has been registered + * successfully with IxAtmm and will be invoked when appropriate. + * @return @li IX_FAIL : Either the supplied callback is invalid, or + * IxAtmm has already registered 32 and connot accommodate + * any further registrations of this type. The request is + * rejected. + * + * @warning The client must not call either the @ref + * ixAtmmVcRegister or @ref ixAtmmVcDeregister interfaces + * from within the supplied callback function. */ +PUBLIC IX_STATUS ixAtmmVcChangeCallbackRegister (IxAtmmVcChangeCallback callback); + + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback) + * + * @brief This interface is invoked to deregister a previously supplied + * callback function. + * + * @param callback @ref IxAtmmVcChangeCallback [in] - Callback which complies + * with the @ref IxAtmmVcChangeCallback definition. This + * function will removed from the table of callbacks. + * + * @return @li IX_SUCCESS : The specified callback has been deregistered + * successfully from IxAtmm. + * @return @li IX_FAIL : Either the supplied callback is invalid, or + * is not currently registered with IxAtmm. + */ +PUBLIC IX_STATUS +ixAtmmVcChangeCallbackDeregister (IxAtmmVcChangeCallback callback); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmUtopiaStatusShow (void) + * + * @brief Display utopia status counters + * + * @param "none" + * + * @return @li IX_SUCCESS : Show function was successful + * @return @li IX_FAIL : Internal failure + */ +PUBLIC IX_STATUS +ixAtmmUtopiaStatusShow (void); + +/** + * @ingroup IxAtmm + * + * @fn ixAtmmUtopiaCfgShow (void) + * + * @brief Display utopia information(config registers and status registers) + * + * @param "none" + * + * @return @li IX_SUCCESS : Show function was successful + * @return @li IX_FAIL : Internal failure + */ +PUBLIC IX_STATUS +ixAtmmUtopiaCfgShow (void); + +#endif +/* IXATMM_H */ + +/** @} */ diff --git a/drivers/net/npe/include/IxDmaAcc.h b/drivers/net/npe/include/IxDmaAcc.h new file mode 100644 index 0000000000..45c7527de9 --- /dev/null +++ b/drivers/net/npe/include/IxDmaAcc.h @@ -0,0 +1,260 @@ +/** + * @file IxDmaAcc.h + * + * @date 15 October 2002 + * + * @brief API of the IXP400 DMA Access Driver Component (IxDma) + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/*--------------------------------------------------------------------- + Doxygen group definitions + ---------------------------------------------------------------------*/ + +#ifndef IXDMAACC_H +#define IXDMAACC_H + +#include "IxOsal.h" +#include "IxNpeDl.h" +/** + * @defgroup IxDmaTypes IXP400 DMA Types (IxDmaTypes) + * @brief The common set of types used in the DMA component + * @{ + */ + +/** + * @ingroup IxDmaTypes + * @enum IxDmaReturnStatus + * @brief Dma return status definitions + */ +typedef enum +{ + IX_DMA_SUCCESS = IX_SUCCESS, /**< DMA Transfer Success */ + IX_DMA_FAIL = IX_FAIL, /**< DMA Transfer Fail */ + IX_DMA_INVALID_TRANSFER_WIDTH, /**< Invalid transfer width */ + IX_DMA_INVALID_TRANSFER_LENGTH, /**< Invalid transfer length */ + IX_DMA_INVALID_TRANSFER_MODE, /**< Invalid transfer mode */ + IX_DMA_INVALID_ADDRESS_MODE, /**< Invalid address mode */ + IX_DMA_REQUEST_FIFO_FULL /**< DMA request queue is full */ +} IxDmaReturnStatus; + +/** + * @ingroup IxDmaTypes + * @enum IxDmaTransferMode + * @brief Dma transfer mode definitions + * @note Copy and byte swap, and copy and reverse modes only support multiples of word data length. + */ +typedef enum +{ + IX_DMA_COPY_CLEAR = 0, /**< copy and clear source*/ + IX_DMA_COPY, /**< copy */ + IX_DMA_COPY_BYTE_SWAP, /**< copy and byte swap (endian) */ + IX_DMA_COPY_REVERSE, /**< copy and reverse */ + IX_DMA_TRANSFER_MODE_INVALID /**< Invalid transfer mode */ +} IxDmaTransferMode; + +/** + * @ingroup IxDmaTypes + * @enum IxDmaAddressingMode + * @brief Dma addressing mode definitions + * @note Fixed source address to fixed destination address addressing mode is not supported. + */ +typedef enum +{ + IX_DMA_INC_SRC_INC_DST = 0, /**< Incremental source address to incremental destination address */ + IX_DMA_INC_SRC_FIX_DST, /**< Incremental source address to incremental destination address */ + IX_DMA_FIX_SRC_INC_DST, /**< Incremental source address to incremental destination address */ + IX_DMA_FIX_SRC_FIX_DST, /**< Incremental source address to incremental destination address */ + IX_DMA_ADDRESSING_MODE_INVALID /**< Invalid Addressing Mode */ +} IxDmaAddressingMode; + +/** + * @ingroup IxDmaTypes + * @enum IxDmaTransferWidth + * @brief Dma transfer width definitions + * @Note Fixed addresses (either source or destination) do not support burst transfer width. + */ +typedef enum +{ + IX_DMA_32_SRC_32_DST = 0, /**< 32-bit src to 32-bit dst */ + IX_DMA_32_SRC_16_DST, /**< 32-bit src to 16-bit dst */ + IX_DMA_32_SRC_8_DST, /**< 32-bit src to 8-bit dst */ + IX_DMA_16_SRC_32_DST, /**< 16-bit src to 32-bit dst */ + IX_DMA_16_SRC_16_DST, /**< 16-bit src to 16-bit dst */ + IX_DMA_16_SRC_8_DST, /**< 16-bit src to 8-bit dst */ + IX_DMA_8_SRC_32_DST, /**< 8-bit src to 32-bit dst */ + IX_DMA_8_SRC_16_DST, /**< 8-bit src to 16-bit dst */ + IX_DMA_8_SRC_8_DST, /**< 8-bit src to 8-bit dst */ + IX_DMA_8_SRC_BURST_DST, /**< 8-bit src to burst dst - Not supported for fixed destination address */ + IX_DMA_16_SRC_BURST_DST, /**< 16-bit src to burst dst - Not supported for fixed destination address */ + IX_DMA_32_SRC_BURST_DST, /**< 32-bit src to burst dst - Not supported for fixed destination address */ + IX_DMA_BURST_SRC_8_DST, /**< burst src to 8-bit dst - Not supported for fixed source address */ + IX_DMA_BURST_SRC_16_DST, /**< burst src to 16-bit dst - Not supported for fixed source address */ + IX_DMA_BURST_SRC_32_DST, /**< burst src to 32-bit dst - Not supported for fixed source address*/ + IX_DMA_BURST_SRC_BURST_DST, /**< burst src to burst dst - Not supported for fixed source and destination address +*/ + IX_DMA_TRANSFER_WIDTH_INVALID /**< Invalid transfer width */ +} IxDmaTransferWidth; + +/** + * @ingroup IxDmaTypes + * @enum IxDmaNpeId + * @brief NpeId numbers to identify NPE A, B or C + */ +typedef enum +{ + IX_DMA_NPEID_NPEA = 0, /**< Identifies NPE A */ + IX_DMA_NPEID_NPEB, /**< Identifies NPE B */ + IX_DMA_NPEID_NPEC, /**< Identifies NPE C */ + IX_DMA_NPEID_MAX /**< Total Number of NPEs */ +} IxDmaNpeId; +/* @} */ +/** + * @defgroup IxDmaAcc IXP400 DMA Access Driver (IxDmaAcc) API + * + * @brief The public API for the IXP400 IxDmaAcc component + * + * @{ + */ + +/** + * @ingroup IxDmaAcc + * @brief DMA Request Id type + */ +typedef UINT32 IxDmaAccRequestId; + +/** + * @ingroup IxDmaAcc + * @def IX_DMA_REQUEST_FULL + * @brief DMA request queue is full + * This constant is a return value used to tell the user that the IxDmaAcc + * queue is full. + * + */ +#define IX_DMA_REQUEST_FULL 16 + +/** + * @ingroup IxDmaAcc + * @brief DMA completion notification + * This function is called to notify a client that the DMA has been completed + * @param status @ref IxDmaReturnStatus [out] - reporting to client + * + */ +typedef void (*IxDmaAccDmaCompleteCallback) (IxDmaReturnStatus status); + +/** + * @ingroup IxDmaAcc + * + * @fn ixDmaAccInit(IxNpeDlNpeId npeId) + * + * @brief Initialise the DMA Access component + * This function will initialise the DMA Access component internals + * @param npeId @ref IxNpeDlNpeId [in] - NPE to use for Dma Transfer + * @return @li IX_SUCCESS succesfully initialised the component + * @return @li IX_FAIL Initialisation failed for some unspecified + * internal reason. + */ +PUBLIC IX_STATUS +ixDmaAccInit(IxNpeDlNpeId npeId); + +/** + * @ingroup IxDmaAcc + * + * @fn ixDmaAccDmaTransfer( + IxDmaAccDmaCompleteCallback callback, + UINT32 SourceAddr, + UINT32 DestinationAddr, + UINT16 TransferLength, + IxDmaTransferMode TransferMode, + IxDmaAddressingMode AddressingMode, + IxDmaTransferWidth TransferWidth) + * + * @brief Perform DMA transfer + * This function will perform DMA transfer between devices within the + * IXP400 memory map. + * @note The following are restrictions for IxDmaAccDmaTransfer: + * @li The function is non re-entrant. + * @li The function assumes host devices are operating in big-endian mode. + * @li Fixed address does not suport burst transfer width + * @li Fixed source address to fixed destinatiom address mode is not suported + * @li The incrementing source address for expansion bus will not support a burst transfer width and copy and clear mode + * + * @param callback @ref IxDmaAccDmaCompleteCallback [in] - function pointer to be stored and called when the DMA transfer is completed. This cannot be NULL. + * @param SourceAddr UINT32 [in] - Starting address of DMA source. Must be a valid IXP400 memory map address. + * @param DestinationAddr UINT32 [in] - Starting address of DMA destination. Must be a valid IXP400 memory map address. + * @param TransferLength UINT16 [in] - The size of DMA data transfer. The range must be from 1-64Kbyte + * @param TransferMode @ref IxDmaTransferMode [in] - The DMA transfer mode + * @param AddressingMode @ref IxDmaAddressingMode [in] - The DMA addressing mode + * @param TransferWidth @ref IxDmaTransferWidth [in] - The DMA transfer width + * + * @return @li IX_DMA_SUCCESS Notification that the DMA request is succesful + * @return @li IX_DMA_FAIL IxDmaAcc not yet initialised or some internal error has occured + * @return @li IX_DMA_INVALID_TRANSFER_WIDTH Transfer width is nit valid + * @return @li IX_DMA_INVALID_TRANSFER_LENGTH Transfer length outside of valid range + * @return @li IX_DMA_INVALID_TRANSFER_MODE Transfer Mode not valid + * @return @li IX_DMA_REQUEST_FIFO_FULL IxDmaAcc request queue is full + */ +PUBLIC IxDmaReturnStatus +ixDmaAccDmaTransfer( + IxDmaAccDmaCompleteCallback callback, + UINT32 SourceAddr, + UINT32 DestinationAddr, + UINT16 TransferLength, + IxDmaTransferMode TransferMode, + IxDmaAddressingMode AddressingMode, + IxDmaTransferWidth TransferWidth); +/** + * @ingroup IxDmaAcc + * + * @fn ixDmaAccShow(void) + * + * @brief Display some component information for debug purposes + * Show some internal operation information relating to the DMA service. + * At a minimum the following will show. + * - the number of the DMA pend (in queue) + * @param None + * @return @li None + */ +PUBLIC IX_STATUS +ixDmaAccShow(void); + +#endif /* IXDMAACC_H */ + diff --git a/drivers/net/npe/include/IxEthAcc.h b/drivers/net/npe/include/IxEthAcc.h new file mode 100644 index 0000000000..ff706c451d --- /dev/null +++ b/drivers/net/npe/include/IxEthAcc.h @@ -0,0 +1,2512 @@ +/** @file IxEthAcc.h + * + * @brief this file contains the public API of @ref IxEthAcc component + * + * Design notes: + * The IX_OSAL_MBUF address is to be specified on bits [31-5] and must + * be cache aligned (bits[4-0] cleared) + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * + */ + +#ifndef IxEthAcc_H +#define IxEthAcc_H + +#include <IxOsBuffMgt.h> +#include <IxTypes.h> + +/** + * @defgroup IxEthAcc IXP400 Ethernet Access (IxEthAcc) API + * + * @brief ethAcc is a library that does provides access to the internal IXP400 10/100Bt Ethernet MACs. + * + *@{ + */ + +/** + * @ingroup IxEthAcc + * @brief Definition of the Ethernet Access status + */ +typedef enum /* IxEthAccStatus */ +{ + IX_ETH_ACC_SUCCESS = IX_SUCCESS, /**< return success*/ + IX_ETH_ACC_FAIL = IX_FAIL, /**< return fail*/ + IX_ETH_ACC_INVALID_PORT, /**< return invalid port*/ + IX_ETH_ACC_PORT_UNINITIALIZED, /**< return uninitialized*/ + IX_ETH_ACC_MAC_UNINITIALIZED, /**< return MAC uninitialized*/ + IX_ETH_ACC_INVALID_ARG, /**< return invalid arg*/ + IX_ETH_TX_Q_FULL, /**< return tx queue is full*/ + IX_ETH_ACC_NO_SUCH_ADDR /**< return no such address*/ +} IxEthAccStatus; + +/** + * @ingroup IxEthAcc + * @enum IxEthAccPortId + * @brief Definition of the IXP400 Mac Ethernet device. + */ +typedef enum +{ + IX_ETH_PORT_1 = 0, /**< Ethernet Port 1 */ + IX_ETH_PORT_2 = 1 /**< Ethernet port 2 */ + ,IX_ETH_PORT_3 = 2 /**< Ethernet port 3 */ +} IxEthAccPortId; + +/** + * @ingroup IxEthAcc + * + * @def IX_ETH_ACC_NUMBER_OF_PORTS + * + * @brief Definition of the number of ports + * + */ +#ifdef __ixp46X +#define IX_ETH_ACC_NUMBER_OF_PORTS (3) +#else +#define IX_ETH_ACC_NUMBER_OF_PORTS (2) +#endif + +/** + * @ingroup IxEthAcc + * + * @def IX_IEEE803_MAC_ADDRESS_SIZE + * + * @brief Definition of the size of the MAC address + * + */ +#define IX_IEEE803_MAC_ADDRESS_SIZE (6) + + +/** + * + * @brief Definition of the IEEE 802.3 Ethernet MAC address structure. + * + * The data should be packed with bytes xx:xx:xx:xx:xx:xx + * @note + * The data must be packed in network byte order. + */ +typedef struct +{ + UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< MAC address */ +} IxEthAccMacAddr; + +/** + * @ingroup IxEthAcc + * @def IX_ETH_ACC_NUM_TX_PRIORITIES + * @brief Definition of the number of transmit priorities + * + */ +#define IX_ETH_ACC_NUM_TX_PRIORITIES (8) + +/** + * @ingroup IxEthAcc + * @enum IxEthAccTxPriority + * @brief Definition of the relative priority used to transmit a frame + * + */ +typedef enum +{ + IX_ETH_ACC_TX_PRIORITY_0 = 0, /**<Lowest Priority submission */ + IX_ETH_ACC_TX_PRIORITY_1 = 1, /**<submission prority of 1 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_2 = 2, /**<submission prority of 2 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_3 = 3, /**<submission prority of 3 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_4 = 4, /**<submission prority of 4 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_5 = 5, /**<submission prority of 5 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_6 = 6, /**<submission prority of 6 (0 is lowest)*/ + IX_ETH_ACC_TX_PRIORITY_7 = 7, /**<Highest priority submission */ + + IX_ETH_ACC_TX_DEFAULT_PRIORITY = IX_ETH_ACC_TX_PRIORITY_0 /**< By default send all + packets with lowest priority */ +} IxEthAccTxPriority; + +/** + * @ingroup IxEthAcc + * @enum IxEthAccRxFrameType + * @brief Identify the type of a frame. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_LINKMASK + */ +typedef enum +{ + IX_ETHACC_RX_LLCTYPE = 0x00, /**< 802.3 - 8802, with LLC/SNAP */ + IX_ETHACC_RX_ETHTYPE = 0x10, /**< 802.3 (Ethernet) without LLC/SNAP */ + IX_ETHACC_RX_STATYPE = 0x20, /**< 802.11, AP <=> STA */ + IX_ETHACC_RX_APTYPE = 0x30 /**< 802.11, AP <=> AP */ +} IxEthAccRxFrameType; + +/** + * @ingroup IxEthAcc + * @enum IxEthAccDuplexMode + * @brief Definition to provision the duplex mode of the MAC. + * + */ +typedef enum +{ + IX_ETH_ACC_FULL_DUPLEX, /**< Full duplex operation of the MAC */ + IX_ETH_ACC_HALF_DUPLEX /**< Half duplex operation of the MAC */ +} IxEthAccDuplexMode; + + +/** + * @ingroup IxEthAcc + * @struct IxEthAccNe + * @brief Definition of service-specific informations. + * + * This structure defines the Ethernet service-specific informations + * and enable QoS and VLAN features. + */ +typedef struct +{ + UINT32 ixReserved_next; /**< reserved for chaining */ + UINT32 ixReserved_lengths; /**< reserved for buffer lengths */ + UINT32 ixReserved_data; /**< reserved for buffer pointer */ + UINT8 ixDestinationPortId; /**< Destination portId for this packet, if known by NPE */ + UINT8 ixSourcePortId; /**< Source portId for this packet */ + UINT16 ixFlags; /**< BitField of option for this frame */ + UINT8 ixQoS; /**< QoS class of the frame */ + UINT8 ixReserved; /**< reserved */ + UINT16 ixVlanTCI; /**< Vlan TCI */ + UINT8 ixDestMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Destination MAC address */ + UINT8 ixSourceMac[IX_IEEE803_MAC_ADDRESS_SIZE]; /**< Source MAC address */ +} IxEthAccNe; + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_PORT_UNKNOWN + * + * @brief Contents of the field @a IX_ETHACC_NE_DESTPORTID when no + * destination port can be found by the NPE for this frame. + * + */ +#define IX_ETHACC_NE_PORT_UNKNOWN (0xff) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_DESTMAC + * + * @brief The location of the destination MAC address in the Mbuf header. + * + */ +#define IX_ETHACC_NE_DESTMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestMac + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_SOURCEMAC + * + * @brief The location of the source MAC address in the Mbuf header. + * + */ +#define IX_ETHACC_NE_SOURCEMAC(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourceMac + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_VLANTCI + * + * @brief The VLAN Tag Control Information associated with this frame + * + * The VLAN Tag Control Information associated with this frame. On Rx + * path, this field is extracted from the packet header. + * On Tx path, the value of this field is inserted in the frame when + * the port is configured to insert or replace vlan tags in the + * egress frames. + * + * @sa IX_ETHACC_NE_FLAGS + */ +#define IX_ETHACC_NE_VLANTCI(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixVlanTCI + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_SOURCEPORTID + * + * @brief The port where this frame came from. + * + * The port where this frame came from. This field is set on receive + * with the port information. This field is ignored on Transmit path. + */ +#define IX_ETHACC_NE_SOURCEPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixSourcePortId + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_DESTPORTID + * + * @brief The destination port where this frame should be sent. + * + * The destination port where this frame should be sent. + * + * @li In the transmit direction, this field contains the destination port + * and is ignored unless @a IX_ETHACC_NE_FLAG_DST is set. + * + * @li In the receive direction, this field contains the port where the + * destination MAC addresses has been learned. If the destination + * MAC address is unknown, then this value is set to the reserved value + * @a IX_ETHACC_NE_PORT_UNKNOWN + * + */ +#define IX_ETHACC_NE_DESTPORTID(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixDestinationPortId + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_QOS + * + * @brief QualityOfService class (QoS) for this received frame. + * + */ +#define IX_ETHACC_NE_QOS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixQoS + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_FLAGS + * + * @brief Bit Mask of the different flags associated with a frame + * + * The flags are the bit-oring combination + * of the following different fields : + * + * @li IP flag (Rx @a IX_ETHACC_NE_IPMASK) + * @li Spanning Tree flag (Rx @a IX_ETHACC_NE_STMASK) + * @li Link layer type (Rx and Tx @a IX_ETHACC_NE_LINKMASK) + * @li VLAN Tagged Frame (Rx @a IX_ETHACC_NE_VLANMASK) + * @li New source MAC address (Rx @a IX_ETHACC_NE_NEWSRCMASK) + * @li Multicast flag (Rx @a IX_ETHACC_NE_MCASTMASK) + * @li Broadcast flag (Rx @a IX_ETHACC_NE_BCASTMASK) + * @li Destination port flag (Tx @a IX_ETHACC_NE_PORTMASK) + * @li Tag/Untag Tx frame (Tx @a IX_ETHACC_NE_TAGMODEMASK) + * @li Overwrite destination port (Tx @a IX_ETHACC_NE_PORTOVERMASK) + * @li Filtered frame (Rx @a IX_ETHACC_NE_STMASK) + * @li VLAN Enabled (Rx and Tx @a IX_ETHACC_NE_VLANENABLEMASK) + */ +#define IX_ETHACC_NE_FLAGS(mBufPtr) ((IxEthAccNe *)&((mBufPtr)->ix_ne))->ixFlags + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_BCASTMASK + * + * @brief This mask defines if a received frame is a broadcast frame. + * + * This mask defines if a received frame is a broadcast frame. + * The BCAST flag is set when the destination MAC address of + * a frame is broadcast. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_BCASTMASK (0x1) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_MCASTMASK + * + * @brief This mask defines if a received frame is a multicast frame. + * + * This mask defines if a received frame is a multicast frame. + * The MCAST flag is set when the destination MAC address of + * a frame is multicast. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_MCASTMASK (0x1 << 1) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_IPMASK + * + * @brief This mask defines if a received frame is a IP frame. + * + * This mask applies to @a IX_ETHACC_NE_FLAGS and defines if a received + * frame is a IP frame. The IP flag is set on Rx direction, depending on + * the frame contents. The flag is set when the length/type field of a + * received frame is 0x8000. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_IPMASK (0x1 << 2) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_VLANMASK + * + * @brief This mask defines if a received frame is VLAN tagged. + * + * This mask defines if a received frame is VLAN tagged. + * When set, the Rx frame is VLAN-tagged and the tag value + * is available thru @a IX_ETHACC_NE_VLANID. + * Note that when sending frames which are already tagged + * this flag should be set, to avoid inserting another VLAN tag. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_VLANID + * + */ +#define IX_ETHACC_NE_VLANMASK (0x1 << 3) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_LINKMASK + * + * @brief This mask is the link layer protocol indicator + * + * This mask applies to @a IX_ETHACC_NE_FLAGS. + * It reflects the state of a frame as it exits an NPE on the Rx path + * or enters an NPE on the Tx path. Its values are as follows: + * @li 0x00 - IEEE802.3 - 8802 (Rx) / IEEE802.3 - 8802 (Tx) + * @li 0x01 - IEEE802.3 - Ethernet (Rx) / IEEE802.3 - Ethernet (Tx) + * @li 0x02 - IEEE802.11 AP -> STA (Rx) / IEEE802.11 STA -> AP (Tx) + * @li 0x03 - IEEE802.11 AP -> AP (Rx) / IEEE802.11 AP->AP (Tx) + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_LINKMASK (0x3 << 4) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_STMASK + * + * @brief This mask defines if a received frame is a Spanning Tree frame. + * + * This mask applies to @a IX_ETHACC_NE_FLAGS. + * On rx direction, it defines if a received if frame is a Spanning Tree frame. + * Setting this fkag on transmit direction overrides the port settings + * regarding the VLAN options and + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_STMASK (0x1 << 6) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_FILTERMASK + * + * @brief This bit indicates whether a frame has been filtered by the Rx service. + * + * This mask applies to @a IX_ETHACC_NE_FLAGS. + * Certain frames, which should normally be fully filtered by the NPE to due + * the destination MAC address being on the same segment as the Rx port are + * still forwarded to the XScale (although the payload is invalid) in order + * to learn the MAC address of the transmitting station, if this is unknown. + * Normally EthAcc will filter and recycle these framess internally and no + * frames with the FILTER bit set will be received by the client. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_FILTERMASK (0x1 << 7) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_PORTMASK + * + * @brief This mask defines the rule to transmit a frame + * + * This mask defines the rule to transmit a frame. When set, a frame + * is transmitted to the destination port as set by the macro + * @a IX_ETHACC_NE_DESTPORTID. If not set, the destination port + * is searched using the destination MAC address. + * + * @note This flag is meaningful only for multiport Network Engines. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_DESTPORTID + * + */ +#define IX_ETHACC_NE_PORTOVERMASK (0x1 << 8) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_TAGMODEMASK + * + * @brief This mask defines the tagging rules to apply to a transmit frame. + * + * This mask defines the tagging rules to apply to a transmit frame + * regardless of the default setting for a port. When used together + * with @a IX_ETHACC_NE_TAGOVERMASK and when set, the + * frame will be tagged prior to transmission. When not set, + * the frame will be untagged prior to transmission. This is accomplished + * irrespective of the Egress tagging rules, constituting a per-frame override. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_TAGOVERMASK + * + */ +#define IX_ETHACC_NE_TAGMODEMASK (0x1 << 9) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_TAGOVERMASK + * + * @brief This mask defines the rule to transmit a frame + * + * This mask defines the rule to transmit a frame. When set, the + * default transmit rules of a port are overriden. + * When not set, the default rules as set by @ref IxEthDB should apply. + * + * @sa IX_ETHACC_NE_FLAGS + * @sa IX_ETHACC_NE_TAGMODEMASK + * + */ +#define IX_ETHACC_NE_TAGOVERMASK (0x1 << 10) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_VLANENABLEMASK + * + * @brief This mask defines if a frame is a VLAN frame or not + * + * When set, frames undergo normal VLAN processing on the Tx path + * (membership filtering, tagging, tag removal etc). If this flag is + * not set, the frame is considered to be a regular non-VLAN frame + * and no VLAN processing will be performed. + * + * Note that VLAN-enabled NPE images will always set this flag in all + * Rx frames, and images which are not VLAN enabled will clear this + * flag for all received frames. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_VLANENABLEMASK (0x1 << 14) + +/** + * @ingroup IxEthAcc + * + * @def IX_ETHACC_NE_NEWSRCMASK + * + * @brief This mask defines if a received frame has been learned. + * + * This mask defines if the source MAC address of a frame is + * already known. If the bit is set, the source MAC address was + * unknown to the NPE at the time the frame was received. + * + * @sa IX_ETHACC_NE_FLAGS + * + */ +#define IX_ETHACC_NE_NEWSRCMASK (0x1 << 15) + +/** + * @ingroup IxEthAcc + * + * @brief This defines the recommanded minimum size of MBUF's submitted + * to the frame receive service. + * + */ +#define IX_ETHACC_RX_MBUF_MIN_SIZE (2048) + +/** + * @ingroup IxEthAcc + * + * @brief This defines the highest MII address of any attached PHYs + * + * The maximum number for PHY address is 31, add on for range checking. + * + */ +#define IXP425_ETH_ACC_MII_MAX_ADDR 32 + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccInit(void) + * + * @brief Initializes the IXP400 Ethernet Access Service. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * This should be called once per module initialization. + * @pre + * The NPE must first be downloaded with the required microcode which supports all + * required features. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Service has failed to initialize. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccInit(void); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccUnload(void) + * + * @brief Unload the Ethernet Access Service. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @return void + * + * <hr> + */ +PUBLIC void ixEthAccUnload(void); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortInit( IxEthAccPortId portId) + * + * @brief Initializes an NPE/Ethernet MAC Port. + * + * The NPE/Ethernet port initialisation includes the following steps + * @li Initialize the NPE/Ethernet MAC hardware. + * @li Verify NPE downloaded and operational. + * @li The NPE shall be available for usage once this API returns. + * @li Verify that the Ethernet port is present before initializing + * + * @li Reentrant - no + * @li ISR Callable - no + * + * This should be called once per mac device. + * The NPE/MAC shall be in disabled state after init. + * + * @pre + * The component must be initialized via @a ixEthAccInit + * The NPE must first be downloaded with the required microcode which supports all + * required features. + * + * Dependant on Services: (Must be initialized before using this service may be initialized) + * ixNPEmh - NPE Message handling service. + * ixQmgr - Queue Manager component. + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS: if the ethernet port is not present, a warning is issued. + * @li @a IX_ETH_ACC_FAIL : The NPE processor has failed to initialize. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortInit(IxEthAccPortId portId); + + +/************************************************************************* + + ##### ## ##### ## ##### ## ##### # # + # # # # # # # # # # # # # # + # # # # # # # # # # # # ###### + # # ###### # ###### ##### ###### # # # + # # # # # # # # # # # # # + ##### # # # # # # # # # # # + +*************************************************************************/ + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameSubmit( + IxEthAccPortId portId, + IX_OSAL_MBUF *buffer, + IxEthAccTxPriority priority) + * + * @brief This function shall be used to submit MBUFs buffers for transmission on a particular MAC device. + * + * When the frame is transmitted, the buffer shall be returned thru the + * callback @a IxEthAccPortTxDoneCallback. + * + * In case of over-submitting, the order of the frames on the + * network may be modified. + * + * Buffers shall be not queued for transmission if the port is disabled. + * The port can be enabled using @a ixEthAccPortEnable + * + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * + * @pre + * @a ixEthAccPortTxDoneCallbackRegister must be called to register a function to allow this service to + * return the buffer to the calling service. + * + * @note + * If the buffer submit fails for any reason the user has retained ownership of the buffer. + * + * @param portId @ref IxEthAccPortId [in] - MAC port ID to transmit Ethernet frame on. + * @param buffer @ref IX_OSAL_MBUF [in] - pointer to an MBUF formatted buffer. Chained buffers are supported for transmission. + * Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is ignored. + * @param priority @ref IxEthAccTxPriority [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Failed to queue frame for transmission. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ + +PUBLIC IxEthAccStatus ixEthAccPortTxFrameSubmit( + IxEthAccPortId portId, + IX_OSAL_MBUF *buffer, + IxEthAccTxPriority priority); + +/** + * @ingroup IxEthAcc + * + * @brief Function prototype for Ethernet Tx Buffer Done callback. Registered + * via @a ixEthAccTxBufferDoneCallbackRegister + * + * This function is called once the previously submitted buffer is no longer required by this service. + * It may be returned upon successful transmission of the frame or during the shutdown of + * the port prior to the transmission of a queued frame. + * The calling of this registered function is not a guarantee of successful transmission of the buffer. + * + * + * @li Reentrant - yes , The user provided function should be reentrant. + * @li ISR Callable - yes , The user provided function must be callable from an ISR. + * + * + * <b>Calling Context </b>: + * @par + * This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun + * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. + * The decision is system specific. + * + * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC + * via @a ixEthAccPortTxDoneCallbackRegister. It allows the same callback to be used for multiple MACs. + * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Tx mbuf descriptor. + * + * @return void + * + * @note + * The field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified by the access layer and reset to NULL. + * + * <hr> + */ +typedef void (*IxEthAccPortTxDoneCallback) ( UINT32 callbackTag, IX_OSAL_MBUF *buffer ); + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxDoneCallbackRegister( IxEthAccPortId portId, + IxEthAccPortTxDoneCallback txCallbackFn, + UINT32 callbackTag) + * + * @brief Register a callback function to allow + * the transmitted buffers to return to the user. + * + * This function registers the transmit buffer done function callback for a particular port. + * + * The registered callback function is called once the previously submitted buffer is no longer required by this service. + * It may be returned upon successful transmission of the frame or shutdown of port prior to submission. + * The calling of this registered function is not a guarantee of successful transmission of the buffer. + * + * If called several times the latest callback shall be registered for a particular port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @pre + * The port must be initialized via @a ixEthAccPortInit + * + * + * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device. + * @param txCallbackFn @ref IxEthAccPortTxDoneCallback [in] - Function to be called to return transmit buffers to the user. + * @param callbackTag UINT32 [in] - This tag shall be provided to the callback function. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxDoneCallbackRegister(IxEthAccPortId portId, + IxEthAccPortTxDoneCallback txCallbackFn, + UINT32 callbackTag); + + + +/** + * @ingroup IxEthAcc + * + * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortRxCallbackRegister + * + * It is the responsibility of the user function to free any MBUF's which it receives. + * + * @li Reentrant - yes , The user provided function should be reentrant. + * @li ISR Callable - yes , The user provided function must be callable from an ISR. + * @par + * + * This function dispatches frames to the user level + * via the provided function. The invocation shall be made for each + * frame dequeued from the Ethernet QM queue. The user is required to free any MBUF's + * supplied via this callback. In addition the registered callback must free up MBUF's + * from the receive free queue when the port is disabled + * + * If called several times the latest callback shall be registered for a particular port. + * + * <b>Calling Context </b>: + * @par + * This callback is called in the context of the queue manager dispatch loop @a ixQmgrgrDispatcherLoopRun + * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. + * The decision is system specific. + * + * + * @param callbackTag UINT32 [in] - This tag is that provided when the callback was registered for a particular MAC + * via @a ixEthAccPortRxCallbackRegister. It allows the same callback to be used for multiple MACs. + * @param mbuf @ref IX_OSAL_MBUF [in] - Pointer to the Rx mbuf header. Mbufs may be chained if + * the frame length is greater than the supplied mbuf length. + * @param reserved [in] - deprecated parameter The information is passed + * thru the IxEthAccNe header destination port ID field + * (@sa IX_ETHACC_NE_DESTPORTID). For backward + * compatibility,the value is equal to IX_ETH_DB_UNKNOWN_PORT (0xff). + * + * @return void + * + * @note + * Buffers may not be filled up to the length supplied in + * @a ixEthAccPortRxFreeReplenish(). The firmware fills + * them to the previous 64 bytes boundary. The user has to be aware + * that the length of the received mbufs may be smaller than the length + * of the supplied mbufs. + * The mbuf header contains the following modified field + * @li @a IX_OSAL_MBUF_PKT_LEN is set in the header of the first mbuf and indicates + * the total frame size + * @li @a IX_OSAL_MBUF_MLEN is set each mbuf header and indicates the payload length + * @li @a IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR contains a pointer to the next + * mbuf, or NULL at the end of a chain. + * @li @a IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR is modified. Its value is reset to NULL + * @li @a IX_OSAL_MBUF_FLAGS contains the bit 4 set for a broadcast packet and the bit 5 + * set for a multicast packet. Other bits are unmodified. + * + * <hr> + */ +typedef void (*IxEthAccPortRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF *buffer, UINT32 reserved); + +/** + * @ingroup IxEthAcc + * + * @brief Function prototype for Ethernet Frame Rx callback. Registered via @a ixEthAccPortMultiBufferRxCallbackRegister + * + * It is the responsibility of the user function to free any MBUF's which it receives. + * + * @li Reentrant - yes , The user provided function should be reentrant. + * @li ISR Callable - yes , The user provided function must be callable from an ISR. + * @par + * + * This function dispatches many frames to the user level + * via the provided function. The invocation shall be made for multiple frames + * dequeued from the Ethernet QM queue. The user is required to free any MBUF's + * supplied via this callback. In addition the registered callback must free up MBUF's + * from the receive free queue when the port is disabled + * + * If called several times the latest callback shall be registered for a particular port. + * + * <b>Calling Context </b>: + * @par + * This callback is called in the context of the queue manager dispatch loop @a ixQmgrDispatcherLoopRun + * within the @ref IxQMgrAPI component. The calling context may be from interrupt or high priority thread. + * The decision is system specific. + * + * + * @param callbackTag - This tag is that provided when the callback was registered for a particular MAC + * via @a ixEthAccPortMultiBufferRxCallbackRegister. It allows the same callback to be used for multiple MACs. + * @param mbuf - Pointer to an array of Rx mbuf headers. Mbufs + * may be chained if + * the frame length is greater than the supplied mbuf length. + * The end of the array contains a zeroed entry (NULL pointer). + * + * @return void + * + * @note The mbufs passed to this callback have the same structure than the + * buffers passed to @a IxEthAccPortRxCallback interfac. + * + * @note The usage of this callback is exclusive with the usage of + * @a ixEthAccPortRxCallbackRegister and @a IxEthAccPortRxCallback + * + * @sa ixEthAccPortMultiBufferRxCallbackRegister + * @sa IxEthAccPortMultiBufferRxCallback + * @sa ixEthAccPortRxCallbackRegister + * @sa IxEthAccPortRxCallback + * <hr> + */ + +typedef void (*IxEthAccPortMultiBufferRxCallback) (UINT32 callbackTag, IX_OSAL_MBUF **buffer); + + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortRxCallback rxCallbackFn, UINT32 callbackTag) + * + * @brief Register a callback function to allow + * the reception of frames. + * + * The registered callback function is called once a frame is received by this service. + * + * If called several times the latest callback shall be registered for a particular port. + * + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * + * @param portId @ref IxEthAccPortId [in] - Register callback for a particular MAC device. + * @param rxCallbackFn @ref IxEthAccPortRxCallback [in] - Function to be called when Ethernet frames are availble. + * @param callbackTag UINT32 [in] - This tag shall be provided to the callback function. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxCallbackRegister(IxEthAccPortId portId, + IxEthAccPortRxCallback rxCallbackFn, + UINT32 callbackTag); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMultiBufferRxCallbackRegister( IxEthAccPortId portId, IxEthAccPortMultiBufferRxCallback rxCallbackFn, UINT32 callbackTag) + * + * @brief Register a callback function to allow + * the reception of frames. + * + * The registered callback function is called once a frame is + * received by this service. If many frames are already received, + * the function is called once. + * + * If called several times the latest callback shall be registered for a particular port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * + * @param portId - Register callback for a particular MAC device. + * @param rxCallbackFn - @a IxEthAccMultiBufferRxCallbackFn - Function to be called when Ethernet frames are availble. + * @param callbackTag - This tag shall be provided to the callback function. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * @li @a IX_ETH_ACC_INVALID_ARG : An argument other than portId is invalid. + * + * @sa ixEthAccPortMultiBufferRxCallbackRegister + * @sa IxEthAccPortMultiBufferRxCallback + * @sa ixEthAccPortRxCallbackRegister + * @sa IxEthAccPortRxCallback + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMultiBufferRxCallbackRegister(IxEthAccPortId portId, + IxEthAccPortMultiBufferRxCallback rxCallbackFn, + UINT32 callbackTag); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer) + * + * @brief This function provides buffers for the Ethernet receive path. + * + * This component does not have a buffer management mechanisms built in. All Rx buffers must be supplied to it + * via this interface. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @param portId @ref IxEthAccPortId [in] - Provide buffers only to specific Rx MAC. + * @param buffer @ref IX_OSAL_MBUF [in] - Provide an MBUF to the Ethernet receive mechanism. + * Buffers size smaller than IX_ETHACC_RX_MBUF_MIN_SIZE may result in poor + * performances and excessive buffer chaining. Buffers + * larger than this size may be suitable for jumbo frames. + * Chained packets are not supported and the field IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR must be NULL. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Buffer has was not able to queue the + * buffer in the receive service. + * @li @a IX_ETH_ACC_FAIL : Buffer size is less than IX_ETHACC_RX_MBUF_MIN_SIZE + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * @note + * If the buffer replenish operation fails it is the responsibility + * of the user to free the buffer. + * + * @note + * Sufficient buffers must be supplied to the component to maintain + * receive throughput and avoid rx buffer underflow conditions. + * To meet this goal, It is expected that the user preload the + * component with a sufficent number of buffers prior to enabling the + * NPE Ethernet receive path. The recommended minimum number of + * buffers is 8. + * + * @note + * For maximum performances, the mbuf size should be greater + * than the maximum frame size (Ethernet header, payload and FCS) + 64. + * Supplying smaller mbufs to the service results in mbuf + * chaining and degraded performances. The recommended size + * is @a IX_ETHACC_RX_MBUF_MIN_SIZE, which is + * enough to take care of 802.3 frames and "baby jumbo" frames without + * chaining, and "jumbo" frame within chaining. + * + * @note + * Buffers may not be filled up to their length. The firware fills + * them up to the previous 64 bytes boundary. The user has to be aware + * that the length of the received mbufs may be smaller than the length + * of the supplied mbufs. + * + * @warning This function checks the parameters if the NDEBUG + * flag is not defined. Turning on the argument checking (disabled by + * default) results in a lower EthAcc performance as this function + * is part of the data path. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxFreeReplenish( IxEthAccPortId portId, IX_OSAL_MBUF *buffer); + + + +/*************************************************************** + + #### #### # # ##### ##### #### # + # # # # ## # # # # # # # + # # # # # # # # # # # # + # # # # # # # ##### # # # + # # # # # ## # # # # # # + #### #### # # # # # #### ###### + + + ##### # ## # # ###### + # # # # # ## # # + # # # # # # # # ##### + ##### # ###### # # # # + # # # # # ## # + # ###### # # # # ###### + +***************************************************************/ + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortEnable(IxEthAccPortId portId) + * + * @brief This enables an Ethernet port for both Tx and Rx. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre The port must first be initialized via @a ixEthAccPortInit and the MAC address + * must be set using @a ixEthAccUnicastMacAddressSet before enabling it + * The rx and Tx Done callbacks registration via @a + * ixEthAccPortTxDoneCallbackRegister amd @a ixEthAccPortRxCallbackRegister + * has to be done before enabling the traffic. + * + * @param portId @ref IxEthAccPortId [in] - Port id to act upon. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized + * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortDisable(IxEthAccPortId portId) + * + * @brief This disables an Ethernet port for both Tx and Rx. + * + * Free MBufs are returned to the user via the registered callback when the port is disabled + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre The port must be enabled with @a ixEthAccPortEnable, otherwise this + * function has no effect + * + * @param portId @ref IxEthAccPortId [in] - Port id to act upon. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is not initialized + * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled) + * + * @brief Get the enabled state of a port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @pre The port must first be initialized via @a ixEthAccPortInit + * + * @param portId @ref IxEthAccPortId [in] - Port id to act upon. + * @param enabled BOOL [out] - location to store the state of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortEnabledQuery(IxEthAccPortId portId, BOOL *enabled); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId) + * + * @brief Put the Ethernet MAC device in non-promiscuous mode. + * + * In non-promiscuous mode the MAC filters all frames other than + * destination MAC address which matches the following criteria: + * @li Unicast address provisioned via @a ixEthAccUnicastMacAddressSet + * @li All broadcast frames. + * @li Multicast addresses provisioned via @a ixEthAccMulticastAddressJoin + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortPromiscuousModeSet + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClear(IxEthAccPortId portId); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId) + * + * @brief Put the MAC device in promiscuous mode. + * + * If the device is in promiscuous mode then all all received frames shall be forwared + * to the NPE for processing. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortPromiscuousModeClear + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSet(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortUnicastMacAddressSet( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Configure unicast MAC address for a particular port + * + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSet(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortUnicastMacAddressGet( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Get unicast MAC address for a particular MAC port + * + * @pre + * The MAC address must first be set via @a ixEthAccMacPromiscuousModeSet + * If the MAC address has not been set, the function returns a + * IX_ETH_ACC_MAC_UNINITIALIZED status + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [out] - Ethernet MAC address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_MAC_UNINITIALIZED : port MAC address is not initialized. + * @li @a IX_ETH_ACC_FAIL : macAddr is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortUnicastMacAddressGet(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressJoin( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Add a multicast address to the MAC address table. + * + * @note + * Due to the operation of the Ethernet MAC multicast filtering mechanism, frames which do not + * have a multicast destination address which were provisioned via this API may be forwarded + * to the NPE's. This is a result of the hardware comparison algorithm used in the destination mac address logic + * within the Ethernet MAC. + * + * See Also: IXP425 hardware development manual. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Error writing to the MAC registers + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressJoin(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressJoinAll( IxEthAccPortId portId) + * + * @brief Filter all frames with multicast dest. + * + * This function clears the MAC address table, and then sets + * the MAC to forward ALL multicast frames to the NPE. + * Specifically, it forwards all frames whose destination address + * has the LSB of the highest byte set (01:00:00:00:00:00). This + * bit is commonly referred to as the "multicast bit". + * Broadcast frames will still be forwarded. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressJoinAll(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressLeave( IxEthAccPortId portId, + IxEthAccMacAddr *macAddr) + * + * @brief Remove a multicast address from the MAC address table. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * @param *macAddr @ref IxEthAccMacAddr [in] - Ethernet Mac address. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_NO_SUCH_ADDR : Failed if MAC address was not in the table. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressLeave(IxEthAccPortId portId, + IxEthAccMacAddr *macAddr); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressLeaveAll( IxEthAccPortId portId) + * + * @brief This function unconfigures the multicast filtering settings + * + * This function first clears the MAC address table, and then sets + * the MAC as configured by the promiscuous mode current settings. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMulticastAddressLeaveAll(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortUnicastAddressShow(IxEthAccPortId portId) + * + * @brief Displays unicast MAC address + * + * Displays unicast address which is configured using + * @a ixEthAccUnicastMacAddressSet. This function also displays the MAC filter used + * to filter multicast frames. + * + * Other functions modify the MAC filtering + * + * @li @a ixEthAccPortMulticastAddressJoinAll() - all multicast + * frames are forwarded to the application + * @li @a ixEthAccPortMulticastAddressLeaveAll() - rollback the + * effects of @a ixEthAccPortMulticastAddressJoinAll() + * @li @a ixEthAccPortMulticastAddressLeave() - unprovision a new + * filtering address + * @li @a ixEthAccPortMulticastAddressJoin() - provision a new + * filtering address + * @li @a ixEthAccPortPromiscuousModeSet() - all frames are + * forwarded to the application regardless of the multicast + * address provisioned + * @li @a ixEthAccPortPromiscuousModeClear() - frames are forwarded + * to the application following the multicast address provisioned + * + * In all cases, unicast and broadcast addresses are forwarded to + * the application. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return void + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShow(IxEthAccPortId portId); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortMulticastAddressShow( IxEthAccPortId portId) + * + * @brief Displays multicast MAC address + * + * Displays multicast address which have been configured using @a ixEthAccMulticastAddressJoin + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] - Ethernet port id. + * + * @return void + * + * <hr> + */ +PUBLIC void ixEthAccPortMulticastAddressShow( IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortDuplexModeSet( IxEthAccPortId portId, IxEthAccDuplexMode mode ) + * + * @brief Set the duplex mode for the MAC. + * + * Configure the IXP400 MAC to either full or half duplex. + * + * @note + * The configuration should match that provisioned on the PHY. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * @param mode @ref IxEthAccDuplexMode [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortDuplexModeSet(IxEthAccPortId portId,IxEthAccDuplexMode mode); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortDuplexModeGet( IxEthAccPortId portId, IxEthAccDuplexMode *mode ) + * + * @brief Get the duplex mode for the MAC. + * + * return the duplex configuration of the IXP400 MAC. + * + * @note + * The configuration should match that provisioned on the PHY. + * See @a ixEthAccDuplexModeSet + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * @param *mode @ref IxEthAccDuplexMode [out] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + * + */ +PUBLIC IxEthAccStatus +ixEthAccPortDuplexModeGet(IxEthAccPortId portId,IxEthAccDuplexMode *mode ); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendPaddingEnable( IxEthAccPortId portId) + * + * @brief Enable padding bytes to be appended to runt frames submitted to + * this port + * + * Enable up to 60 null-bytes padding bytes to be appended to runt frames + * submitted to this port. This is the default behavior of the access + * component. + * + * @warning Do not change this behaviour while the port is enabled. + * + * @note When Tx padding is enabled, Tx FCS generation is turned on + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortTxFrameAppendFCSDusable + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendPaddingDisable( IxEthAccPortId portId) + * + * @brief Disable padding bytes to be appended to runt frames submitted to + * this port + * + * Disable padding bytes to be appended to runt frames + * submitted to this port. This is not the default behavior of the access + * component. + * + * @warning Do not change this behaviour while the port is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendPaddingDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendFCSEnable( IxEthAccPortId portId) + * + * @brief Enable the appending of Ethernet FCS to all frames submitted to this port + * + * When enabled, the FCS is added to the submitted frames. This is the default + * behavior of the access component. + * Do not change this behaviour while the port is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendFCSEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortTxFrameAppendFCSDisable( IxEthAccPortId portId) + * + * @brief Disable the appending of Ethernet FCS to all frames submitted to this port. + * + * When disabled, the Ethernet FCS is not added to the submitted frames. + * This is not the default + * behavior of the access component. + * + * @note Since the FCS is not appended to the frame it is expected that the frame submitted to the + * component includes a valid FCS at the end of the data, although this will not be validated. + * + * The component shall forward the frame to the Ethernet MAC WITHOUT modification. + * + * Do not change this behaviour while the port is enabled. + * + * @note Tx FCS append is not disabled while Tx padding is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @sa ixEthAccPortTxFrameAppendPaddingEnable + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxFrameAppendFCSDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxFrameAppendFCSEnable( IxEthAccPortId portId) + * + * @brief Forward frames with FCS included in the receive buffer. + * + * The FCS is not striped from the receive buffer. + * The received frame length includes the FCS size (4 bytes). ie. + * A minimum sized ethernet frame shall have a length of 64bytes. + * + * Frame FCS validity checks are still carried out on all received frames. + * + * This is not the default + * behavior of the access component. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxFrameAppendFCSEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccPortRxFrameAppendFCSDisable( IxEthAccPortId portId) + * + * @brief Do not forward the FCS portion of the received Ethernet frame to the user. + * The FCS is striped from the receive buffer. + * The received frame length does not include the FCS size (4 bytes). + * Frame FCS validity checks are still carried out on all received frames. + * + * This is the default behavior of the component. + * Do not change this behaviour while the port is enabled. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxFrameAppendFCSDisable(IxEthAccPortId portId); + + + + +/** + * @ingroup IxEthAcc + * + * @enum IxEthAccSchedulerDiscipline + * + * @brief Definition for the port scheduling discipline + * + * Select the port scheduling discipline on receive and transmit path + * @li FIFO : No Priority : In this configuration all frames are processed + * in the access component in the strict order in which + * the component received them. + * @li FIFO : Priority : This shall be a very simple priority mechanism. + * Higher prior-ity frames shall be forwarded + * before lower priority frames. There shall be no + * fairness mechanisms applied across different + * priorities. Higher priority frames could starve + * lower priority frames indefinitely. + */ +typedef enum +{ + FIFO_NO_PRIORITY, /**<frames submitted with no priority*/ + FIFO_PRIORITY /**<higher prority frames submitted before lower priority*/ +}IxEthAccSchedulerDiscipline; + +/** + * @ingroup IxEthAcc + * + * @def IxEthAccTxSchedulerDiscipline + * + * @brief Deprecated definition for the port transmit scheduling discipline + */ +#define IxEthAccTxSchedulerDiscipline IxEthAccSchedulerDiscipline + + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccTxSchedulingDisciplineSet( IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched) + * + * @brief Set the port scheduling to one of @a IxEthAccSchedulerDiscipline + * + * The default behavior of the component is @a FIFO_NO_PRIORITY. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * + * @param portId @ref IxEthAccPortId [in] + * @param sched @ref IxEthAccSchedulerDiscipline [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline. + * @li @a IX_ETH_ACC_FAIL : Invalid/unsupported discipline. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccTxSchedulingDisciplineSet(IxEthAccPortId portId, + IxEthAccSchedulerDiscipline sched); + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched) + * + * @brief Set the Rx scheduling to one of @a IxEthAccSchedulerDiscipline + * + * The default behavior of the component is @a FIFO_NO_PRIORITY. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @param sched : @a IxEthAccSchedulerDiscipline + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Set appropriate discipline. + * @li @a IX_ETH_ACC_FAIL : Invalid/unsupported discipline. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccRxSchedulingDisciplineSet(IxEthAccSchedulerDiscipline sched); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccNpeLoopbackEnable(IxEthAccPortId portId) + * + * @brief Enable NPE loopback + * + * When this loopback mode is enabled all the transmitted frames are + * received on the same port, without payload. + * + * This function is recommended for power-up diagnostic checks and + * should never be used under normal Ethernet traffic operations. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @param portId : ID of the port + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : NPE loopback mode enabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortNpeLoopbackEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId) + * + * @brief Disable NPE loopback + * + * This function is used to disable the NPE loopback if previously + * enabled using ixEthAccNpeLoopbackEnable. + * + * This function is recommended for power-up diagnostic checks and + * should never be used under normal Ethernet traffic operations. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : NPE loopback successfully disabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortNpeLoopbackDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortTxEnable(IxEthAccPortId portId) + * + * @brief Enable Tx on the port + * + * This function is the complement of ixEthAccPortTxDisable and should + * be used only after Tx was disabled. A MAC core reset is required before + * this function is called (see @a ixEthAccPortMacReset). + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Tx successfully enabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortTxDisable(IxEthAccPortId portId) + * + * @brief Disable Tx on the port + * + * This function can be used to disable Tx in the MAC core. + * Tx can be re-enabled, although this is not guaranteed, by performing + * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortTxEnable. + * Note that using this function is not recommended, except for shutting + * down Tx for emergency reasons. For proper port shutdown and re-enabling + * see ixEthAccPortEnable and ixEthAccPortDisable. + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @pre + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Tx successfully disabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortTxDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortRxEnable(IxEthAccPortId portId) + * + * @brief Enable Rx on the port + * + * This function is the complement of ixEthAccPortRxDisable and should + * be used only after Rx was disabled. + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @pre + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Rx successfully enabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxEnable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortRxDisable(IxEthAccPortId portId) + * + * @brief Disable Rx on the port + * + * This function can be used to disable Rx in the MAC core. + * Rx can be re-enabled, although this is not guaranteed, by performing + * a MAC core reset (@a ixEthAccPortMacReset) and calling ixEthAccPortRxEnable. + * Note that using this function is not recommended, except for shutting + * down Rx for emergency reasons. For proper port shutdown and re-enabling + * see ixEthAccPortEnable and ixEthAccPortDisable. + * + * This function is the recommended usage scenario for emergency security + * shutdown and hardware failure recovery and should never be used for throttling + * traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : Rx successfully disabled + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortRxDisable(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn IxEthAccStatus ixEthAccPortMacReset(IxEthAccPortId portId) + * + * @brief Reset MAC core on the port + * + * This function will perform a MAC core reset (NPE Ethernet coprocessor). + * This function is inherently unsafe and the NPE recovery is not guaranteed + * after this function is called. The proper manner of performing port disable + * and enable (which will reset the MAC as well) is ixEthAccPortEnable/ixEthAccPortDisable. + * + * This function is the recommended usage scenario for hardware failure recovery + * and should never be used for throttling traffic. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @note Calling ixEthAccPortDisable followed by ixEthAccPortEnable is + * guaranteed to restore correct Ethernet Tx/Rx operation. + * + * @param portId : ID of the port + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS : MAC core reset + * @li @a IX_ETH_ACC_FAIL : Invalid port or Ethernet service not initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccPortMacReset(IxEthAccPortId portId); + +/********************************************************************************* + #### ##### ## ##### # #### ##### # #### #### + # # # # # # # # # # # # + #### # # # # # #### # # # #### + # # ###### # # # # # # # + # # # # # # # # # # # # # # # + #### # # # # # #### # # #### #### +**********************************************************************************/ + + +/** + * + * @brief This struct defines the statistics returned by this component. + * + * The component returns MIB2 EthObj variables which are obtained from the + * hardware or maintained by this component. + * + * + */ +typedef struct +{ + UINT32 dot3StatsAlignmentErrors; /**< link error count (rx) */ + UINT32 dot3StatsFCSErrors; /**< link error count (rx) */ + UINT32 dot3StatsInternalMacReceiveErrors; /**< link error count (rx) */ + UINT32 RxOverrunDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxLearnedEntryDiscards; /**< NPE: discarded frames count(rx) */ + UINT32 RxLargeFramesDiscards; /**< NPE: discarded frames count(rx) */ + UINT32 RxSTPBlockedDiscards; /**< NPE: discarded frames count(rx) */ + UINT32 RxVLANTypeFilterDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxVLANIdFilterDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxInvalidSourceDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxBlackListDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxWhiteListDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 RxUnderflowEntryDiscards; /**< NPE: discarded frames count (rx) */ + UINT32 dot3StatsSingleCollisionFrames; /**< link error count (tx) */ + UINT32 dot3StatsMultipleCollisionFrames; /**< link error count (tx) */ + UINT32 dot3StatsDeferredTransmissions; /**< link error count (tx) */ + UINT32 dot3StatsLateCollisions; /**< link error count (tx) */ + UINT32 dot3StatsExcessiveCollsions; /**< link error count (tx) */ + UINT32 dot3StatsInternalMacTransmitErrors; /**< link error count (tx) */ + UINT32 dot3StatsCarrierSenseErrors; /**< link error count (tx) */ + UINT32 TxLargeFrameDiscards; /**< NPE: discarded frames count (tx) */ + UINT32 TxVLANIdFilterDiscards; /**< NPE: discarded frames count (tx) */ + +}IxEthEthObjStats; + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMibIIStatsGet(IxEthAccPortId portId ,IxEthEthObjStats *retStats ) + * + * @brief Returns the statistics maintained for a port. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * + * @param portId @ref IxEthAccPortId [in] + * @param retStats @ref IxEthEthObjStats [out] + * @note Please note the user is responsible for cache coheriency of the retStat + * buffer. The data is actually populated via the NPE's. As such cache safe + * memory should be used in the retStats argument. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Invalid arguments. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMibIIStatsGet(IxEthAccPortId portId, IxEthEthObjStats *retStats ); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats) + * + * @brief Returns and clears the statistics maintained for a port. + * + * @li Reentrant - yes + * @li ISR Callable - yes + * + * @pre + * + * @param portId @ref IxEthAccPortId [in] + * @param retStats @ref IxEthEthObjStats [out] + * @note Please note the user is responsible for cache coheriency of the retStats + * buffer. The data is actually populated via the NPE's. As such cache safe + * memory should be used in the retStats argument. + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : invalid arguments. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMibIIStatsGetClear(IxEthAccPortId portId, IxEthEthObjStats *retStats); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMibIIStatsClear(IxEthAccPortId portId) + * + * @brief Clears the statistics maintained for a port. + * + * @li Reentrant - yes + * @li ISR Callable - no + * + * @pre + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : Invalid arguments. + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * @li @a IX_ETH_ACC_PORT_UNINITIALIZED : portId is un-initialized + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccMibIIStatsClear(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMacInit(IxEthAccPortId portId) + * + * @brief Initializes the ethernet MAC settings + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @param portId @ref IxEthAccPortId [in] + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_INVALID_PORT : portId is invalid. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccMacInit(IxEthAccPortId portId); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccStatsShow(IxEthAccPortId portId) + * + * + * @brief Displays a ports statistics on the standard io console using printf. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre + * + * @param portId @ref IxEthAccPortId [in] + * + * @return void + * + * <hr> + */ +PUBLIC void ixEthAccStatsShow(IxEthAccPortId portId); + +/************************************************************************* + + # # # # # # ##### # #### + ## ## # # ## ## # # # # # + # ## # # # # ## # # # # # # + # # # # # # # # # # # + # # # # # # # # # # # + # # # # # # ##### # #### + +*************************************************************************/ + + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiReadRtn (UINT8 phyAddr, + UINT8 phyReg, + UINT16 *value) + * + * + * @brief Reads a 16 bit value from a PHY + * + * Reads a 16-bit word from a register of a MII-compliant PHY. Reading + * is performed through the MII management interface. This function returns + * when the read operation has successfully completed, or when a timeout has elapsed. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31) + * @param phyReg UINT8 [in] - the number of the MII register to read (0-31) + * @param value UINT16 [in] - the value read from the register + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : failed to read the register. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMiiReadRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 *value); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiWriteRtn (UINT8 phyAddr, + UINT8 phyReg, + UINT16 value) + * + * + * @brief Writes a 16 bit value to a PHY + * + * Writes a 16-bit word from a register of a MII-compliant PHY. Writing + * is performed through the MII management interface. This function returns + * when the write operation has successfully completed, or when a timeout has elapsed. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT8 [in] - the address of the Ethernet PHY (0-31) + * @param phyReg UINT8 [in] - the number of the MII register to write (0-31) + * @param value UINT16 [out] - the value to write to the register + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : failed to write register. + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMiiWriteRtn (UINT8 phyAddr, UINT8 phyReg, UINT16 value); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiAccessTimeoutSet(UINT32 timeout) + * + * @brief Overrides the default timeout value and retry count when reading or + * writing MII registers using ixEthAccMiiWriteRtn or ixEthAccMiiReadRtn + * + * The default behavior of the component is to use a IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS ms + * timeout (declared as 100 in IxEthAccMii_p.h) and a retry count of IX_ETH_ACC_MII_TIMEOUT_10TH_SECS + * (declared as 5 in IxEthAccMii_p.h). + * + * The MII read and write functions will attempt to read the status of the register up + * to the retry count times, delaying between each attempt with the timeout value. + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre + * + * @param timeout UINT32 [in] - new timeout value, in milliseconds + * @param timeout UINT32 [in] - new retry count (a minimum value of 1 must be used) + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : invalid parameter(s) + * + * <hr> + */ +PUBLIC IxEthAccStatus +ixEthAccMiiAccessTimeoutSet(UINT32 timeout, UINT32 retryCount); + +/** + * @ingroup IxEthAcc + * + * @fn ixEthAccMiiStatsShow (UINT32 phyAddr) + * + * + * @brief Displays detailed information on a specified PHY + * + * Displays the current values of the first eigth MII registers for a PHY, + * + * @li Reentrant - no + * @li ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and + * generating the MDIO clock. + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * + * @return IxEthAccStatus + * @li @a IX_ETH_ACC_SUCCESS + * @li @a IX_ETH_ACC_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IxEthAccStatus ixEthAccMiiStatsShow (UINT32 phyAddr); + + + +/******* BOARD SPECIFIC DEPRECATED API *********/ + +/* The following functions are high level functions which rely + * on the properties and interface of some Ethernet PHYs. The + * implementation is hardware specific and has been moved to + * the hardware-specific component IxEthMii. + */ + + #include "IxEthMii.h" + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiPhyScan + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyScan + * + * @note this feature is board specific + * + */ +#define ixEthAccMiiPhyScan(phyPresent) ixEthMiiPhyScan(phyPresent,IXP425_ETH_ACC_MII_MAX_ADDR) + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiPhyConfig + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyConfig + * + * @note this feature is board specific + */ +#define ixEthAccMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) \ + ixEthMiiPhyConfig(phyAddr,speed100,fullDuplex,autonegotiate) + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiPhyReset + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyReset + * + * @note this feature is board specific + */ +#define ixEthAccMiiPhyReset(phyAddr) \ + ixEthMiiPhyReset(phyAddr) + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiLinkStatus + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiLinkStatus + * + * @note this feature is board specific + */ +#define ixEthAccMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) \ + ixEthMiiLinkStatus(phyAddr,linkUp,speed100,fullDuplex,autoneg) + + + +/** + * @ingroup IxEthAcc + * + * @def ixEthAccMiiShow + * + * @brief : deprecated API entry point. This definition + * ensures backward compatibility + * + * See @ref ixEthMiiPhyShow + * + * @note this feature is board specific + */ +#define ixEthAccMiiShow(phyAddr) \ + ixEthMiiPhyShow(phyAddr) + +#endif /* ndef IxEthAcc_H */ +/** + *@} + */ diff --git a/drivers/net/npe/include/IxEthAccDataPlane_p.h b/drivers/net/npe/include/IxEthAccDataPlane_p.h new file mode 100644 index 0000000000..8b8e6b256c --- /dev/null +++ b/drivers/net/npe/include/IxEthAccDataPlane_p.h @@ -0,0 +1,245 @@ +/** + * @file IxEthAccDataPlane_p.h + * + * @author Intel Corporation + * @date 12-Feb-2002 + * + * @brief Internal Header file for IXP425 Ethernet Access component. + * + * Design Notes: + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + + +#ifndef IxEthAccDataPlane_p_H +#define IxEthAccDataPlane_p_H + +#include <IxOsal.h> +#include <IxQMgr.h> + +/** + * @addtogroup IxEthAccPri + *@{ + */ + +/* typedefs global to this file*/ + +typedef struct +{ + IX_OSAL_MBUF *pHead; + IX_OSAL_MBUF *pTail; +}IxEthAccDataPlaneQList; + + +/** + * @struct IxEthAccDataPlaneStats + * @brief Statistics data structure associated with the data plane + * + */ +typedef struct +{ + UINT32 addToSwQ; + UINT32 removeFromSwQ; + UINT32 unchainedTxMBufs; + UINT32 chainedTxMBufs; + UINT32 unchainedTxDoneMBufs; + UINT32 chainedTxDoneMBufs; + UINT32 unchainedRxMBufs; + UINT32 chainedRxMBufs; + UINT32 unchainedRxFreeMBufs; + UINT32 chainedRxFreeMBufs; + UINT32 rxCallbackCounter; + UINT32 rxCallbackBurstRead; + UINT32 txDoneCallbackCounter; + UINT32 unexpectedError; +} IxEthAccDataPlaneStats; + +/** + * @fn ixEthAccMbufFromSwQ + * @brief used during disable steps to convert mbufs from + * swq format, ready to be pushed into hw queues for NPE, + * back into XScale format + */ +IX_OSAL_MBUF *ixEthAccMbufFromSwQ(IX_OSAL_MBUF *mbuf); + +/** + * @fn ixEthAccDataPlaneShow + * @brief Show function (for data plane statistics + */ +void ixEthAccDataPlaneShow(void); + +/* + * lock dataplane when atomic operation is required + */ +#define IX_ETH_ACC_DATA_PLANE_LOCK(arg) arg = ixOsalIrqLock(); +#define IX_ETH_ACC_DATA_PLANE_UNLOCK(arg) ixOsalIrqUnlock(arg); + +/* + * Use MBUF fields + */ +#define IX_ETHACC_NE_SHARED(mBufPtr) \ + ((IxEthAccNe *)&((mBufPtr)->ix_ne)) + +#if 1 + +#define IX_ETHACC_NE_NEXT(mBufPtr) (mBufPtr)->ix_ne.reserved[0] + +/* tm - wrong!! len and pkt_len are in the second word - #define IX_ETHACC_NE_LEN(mBufPtr) (mBufPtr)->ix_ne.reserved[3] */ +#define IX_ETHACC_NE_LEN(mBufPtr) (mBufPtr)->ix_ne.reserved[1] + +#define IX_ETHACC_NE_DATA(mBufPtr)(mBufPtr)->ix_ne.reserved[2] + +#else + +#define IX_ETHACC_NE_NEXT(mBufPtr) \ + IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_next + +#define IX_ETHACC_NE_LEN(mBufPtr) \ + IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_lengths + +#define IX_ETHACC_NE_DATA(mBufPtr) \ + IX_ETHACC_NE_SHARED(mBufPtr)->ixReserved_data +#endif + +/* + * Use MBUF next pointer field to chain data. + */ +#define IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER(mbuf) (mbuf)->ix_ctrl.ix_chain + + + +#define IX_ETH_ACC_DATAPLANE_IS_Q_EMPTY(mbuf_list) ((mbuf_list.pHead) == NULL) + + +#define IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_HEAD(mbuf_list,mbuf_to_add) \ + do { \ + int lockVal; \ + IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); \ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.addToSwQ); \ + if ( (mbuf_list.pHead) != NULL ) \ + { \ + (IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add))) = (mbuf_list.pHead);\ + (mbuf_list.pHead) = (mbuf_to_add); \ + } \ + else { \ + (mbuf_list.pTail) = (mbuf_list.pHead) = (mbuf_to_add); \ + IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL; \ + } \ + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); \ + } while(0) + + +#define IX_ETH_ACC_DATAPLANE_ADD_MBUF_TO_Q_TAIL(mbuf_list,mbuf_to_add) \ + do { \ + int lockVal; \ + IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); \ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.addToSwQ); \ + if ( (mbuf_list.pHead) == NULL ) \ + { \ + (mbuf_list.pHead) = mbuf_to_add; \ + IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL; \ + } \ + else { \ + IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_list.pTail)) = (mbuf_to_add); \ + IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_add)) = NULL; \ + } \ + (mbuf_list.pTail) = mbuf_to_add; \ + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); \ + } while (0) + + +#define IX_ETH_ACC_DATAPLANE_REMOVE_MBUF_FROM_Q_HEAD(mbuf_list,mbuf_to_rem) \ + do { \ + int lockVal; \ + IX_ETH_ACC_DATA_PLANE_LOCK(lockVal); \ + if ( (mbuf_list.pHead) != NULL ) \ + { \ + IX_ETH_ACC_STATS_INC(ixEthAccDataStats.removeFromSwQ); \ + (mbuf_to_rem) = (mbuf_list.pHead) ; \ + (mbuf_list.pHead) = (IX_ETH_ACC_MBUF_NEXT_PKT_CHAIN_MEMBER((mbuf_to_rem)));\ + } \ + else { \ + (mbuf_to_rem) = NULL; \ + } \ + IX_ETH_ACC_DATA_PLANE_UNLOCK(lockVal); \ + } while (0) + + +/** + * @brief message handler QManager entries for NPE id => port ID conversion (NPE_B => 0, NPE_C => 1) + */ +#define IX_ETH_ACC_PORT_TO_NPE_ID(port) \ + ixEthAccPortData[(port)].npeId + +#define IX_ETH_ACC_NPE_TO_PORT_ID(npe) ((npe == 0 ? 2 : (npe == 1 ? 0 : ( npe == 2 ? 1 : -1 )))) + +#define IX_ETH_ACC_PORT_TO_TX_Q_ID(port) \ + ixEthAccPortData[(port)].ixEthAccTxData.txQueue + +#define IX_ETH_ACC_PORT_TO_RX_FREE_Q_ID(port) \ + ixEthAccPortData[(port)].ixEthAccRxData.rxFreeQueue + +#define IX_ETH_ACC_PORT_TO_TX_Q_SOURCE(port) (port == IX_ETH_PORT_1 ? IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE : (port == IX_ETH_PORT_2 ? IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE : IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE)) + +#define IX_ETH_ACC_PORT_TO_RX_FREE_Q_SOURCE(port) (port == IX_ETH_PORT_1 ? IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE : (port == IX_ETH_PORT_2 ? IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE : IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE )) + +/* Flush the mbufs chain and all data pointed to by the mbuf */ + +#ifndef NDEBUG +#define IX_ETH_ACC_STATS_INC(x) (x++) +#else +#define IX_ETH_ACC_STATS_INC(x) +#endif + +#define IX_ETH_ACC_MAX_TX_FRAMES_TO_SUBMIT 128 + +void ixEthRxFrameQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); +void ixEthRxMultiBufferQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); +void ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); + +#endif /* IxEthAccDataPlane_p_H */ + + +/** + *@} + */ + diff --git a/drivers/net/npe/include/IxEthAccMac_p.h b/drivers/net/npe/include/IxEthAccMac_p.h new file mode 100644 index 0000000000..93e9d98e76 --- /dev/null +++ b/drivers/net/npe/include/IxEthAccMac_p.h @@ -0,0 +1,248 @@ +/* + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +#ifndef IxEthAccMac_p_H +#define IxEthAccMac_p_H + +#include "IxOsal.h" + +#define IX_ETH_ACC_MAX_MULTICAST_ADDRESSES 256 +#define IX_ETH_ACC_NUM_PORTS 3 +#define IX_ETH_ACC_MAX_FRAME_SIZE_DEFAULT 1536 +#define IX_ETH_ACC_MAX_FRAME_SIZE_UPPER_RANGE (65536-64) +#define IX_ETH_ACC_MAX_FRAME_SIZE_LOWER_RANGE 64 + +/* + * + * MAC register definitions + * + */ +#define IX_ETH_ACC_MAC_0_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE +#define IX_ETH_ACC_MAC_1_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE +#define IX_ETH_ACC_MAC_2_BASE IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE + +#define IX_ETH_ACC_MAC_TX_CNTRL1 0x000 +#define IX_ETH_ACC_MAC_TX_CNTRL2 0x004 +#define IX_ETH_ACC_MAC_RX_CNTRL1 0x010 +#define IX_ETH_ACC_MAC_RX_CNTRL2 0x014 +#define IX_ETH_ACC_MAC_RANDOM_SEED 0x020 +#define IX_ETH_ACC_MAC_THRESH_P_EMPTY 0x030 +#define IX_ETH_ACC_MAC_THRESH_P_FULL 0x038 +#define IX_ETH_ACC_MAC_BUF_SIZE_TX 0x040 +#define IX_ETH_ACC_MAC_TX_DEFER 0x050 +#define IX_ETH_ACC_MAC_RX_DEFER 0x054 +#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1 0x060 +#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2 0x064 +#define IX_ETH_ACC_MAC_SLOT_TIME 0x070 +#define IX_ETH_ACC_MAC_MDIO_CMD_1 0x080 +#define IX_ETH_ACC_MAC_MDIO_CMD_2 0x084 +#define IX_ETH_ACC_MAC_MDIO_CMD_3 0x088 +#define IX_ETH_ACC_MAC_MDIO_CMD_4 0x08c +#define IX_ETH_ACC_MAC_MDIO_STS_1 0x090 +#define IX_ETH_ACC_MAC_MDIO_STS_2 0x094 +#define IX_ETH_ACC_MAC_MDIO_STS_3 0x098 +#define IX_ETH_ACC_MAC_MDIO_STS_4 0x09c +#define IX_ETH_ACC_MAC_ADDR_MASK_1 0x0A0 +#define IX_ETH_ACC_MAC_ADDR_MASK_2 0x0A4 +#define IX_ETH_ACC_MAC_ADDR_MASK_3 0x0A8 +#define IX_ETH_ACC_MAC_ADDR_MASK_4 0x0AC +#define IX_ETH_ACC_MAC_ADDR_MASK_5 0x0B0 +#define IX_ETH_ACC_MAC_ADDR_MASK_6 0x0B4 +#define IX_ETH_ACC_MAC_ADDR_1 0x0C0 +#define IX_ETH_ACC_MAC_ADDR_2 0x0C4 +#define IX_ETH_ACC_MAC_ADDR_3 0x0C8 +#define IX_ETH_ACC_MAC_ADDR_4 0x0CC +#define IX_ETH_ACC_MAC_ADDR_5 0x0D0 +#define IX_ETH_ACC_MAC_ADDR_6 0x0D4 +#define IX_ETH_ACC_MAC_INT_CLK_THRESH 0x0E0 +#define IX_ETH_ACC_MAC_UNI_ADDR_1 0x0F0 +#define IX_ETH_ACC_MAC_UNI_ADDR_2 0x0F4 +#define IX_ETH_ACC_MAC_UNI_ADDR_3 0x0F8 +#define IX_ETH_ACC_MAC_UNI_ADDR_4 0x0FC +#define IX_ETH_ACC_MAC_UNI_ADDR_5 0x100 +#define IX_ETH_ACC_MAC_UNI_ADDR_6 0x104 +#define IX_ETH_ACC_MAC_CORE_CNTRL 0x1FC + + +/* + * + *Bit definitions + * + */ + +/* TX Control Register 1*/ + +#define IX_ETH_ACC_TX_CNTRL1_TX_EN BIT(0) +#define IX_ETH_ACC_TX_CNTRL1_DUPLEX BIT(1) +#define IX_ETH_ACC_TX_CNTRL1_RETRY BIT(2) +#define IX_ETH_ACC_TX_CNTRL1_PAD_EN BIT(3) +#define IX_ETH_ACC_TX_CNTRL1_FCS_EN BIT(4) +#define IX_ETH_ACC_TX_CNTRL1_2DEFER BIT(5) +#define IX_ETH_ACC_TX_CNTRL1_RMII BIT(6) + +/* TX Control Register 2 */ +#define IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK 0xf + +/* RX Control Register 1 */ +#define IX_ETH_ACC_RX_CNTRL1_RX_EN BIT(0) +#define IX_ETH_ACC_RX_CNTRL1_PADSTRIP_EN BIT(1) +#define IX_ETH_ACC_RX_CNTRL1_CRC_EN BIT(2) +#define IX_ETH_ACC_RX_CNTRL1_PAUSE_EN BIT(3) +#define IX_ETH_ACC_RX_CNTRL1_LOOP_EN BIT(4) +#define IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN BIT(5) +#define IX_ETH_ACC_RX_CNTRL1_RX_RUNT_EN BIT(6) +#define IX_ETH_ACC_RX_CNTRL1_BCAST_DIS BIT(7) + +/* RX Control Register 2 */ +#define IX_ETH_ACC_RX_CNTRL2_DEFER_EN BIT(0) + + + +/* Core Control Register */ +#define IX_ETH_ACC_CORE_RESET BIT(0) +#define IX_ETH_ACC_CORE_RX_FIFO_FLUSH BIT(1) +#define IX_ETH_ACC_CORE_TX_FIFO_FLUSH BIT(2) +#define IX_ETH_ACC_CORE_SEND_JAM BIT(3) +#define IX_ETH_ACC_CORE_MDC_EN BIT(4) + +/* 1st bit of 1st MAC octet */ +#define IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ( 1) + + +/* + * + * Default values + * + */ + + +#define IX_ETH_ACC_TX_CNTRL1_DEFAULT (IX_ETH_ACC_TX_CNTRL1_TX_EN | \ + IX_ETH_ACC_TX_CNTRL1_RETRY | \ + IX_ETH_ACC_TX_CNTRL1_FCS_EN | \ + IX_ETH_ACC_TX_CNTRL1_2DEFER | \ + IX_ETH_ACC_TX_CNTRL1_PAD_EN) + +#define IX_ETH_ACC_TX_MAX_RETRIES_DEFAULT 0x0f + +#define IX_ETH_ACC_RX_CNTRL1_DEFAULT (IX_ETH_ACC_RX_CNTRL1_CRC_EN \ + | IX_ETH_ACC_RX_CNTRL1_RX_EN) + +#define IX_ETH_ACC_RX_CNTRL2_DEFAULT 0x0 + +/* Thresholds determined by NPE firmware FS */ +#define IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT 0x12 +#define IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT 0x30 + +/* Number of bytes that must be in the tx fifo before + transmission commences*/ +#define IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT 0x8 + +/* One-part deferral values */ +#define IX_ETH_ACC_MAC_TX_DEFER_DEFAULT 0x15 +#define IX_ETH_ACC_MAC_RX_DEFER_DEFAULT 0x16 + +/* Two-part deferral values... */ +#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT 0x08 +#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT 0x07 + +/* This value applies to MII */ +#define IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT 0x80 + +/* This value applies to RMII */ +#define IX_ETH_ACC_MAC_SLOT_TIME_RMII_DEFAULT 0xFF + +#define IX_ETH_ACC_MAC_ADDR_MASK_DEFAULT 0xFF + +#define IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT 0x1 +/*The following is a value chosen at random*/ +#define IX_ETH_ACC_RANDOM_SEED_DEFAULT 0x8 + +/*By default we must configure the MAC to generate the + MDC clock*/ +#define IX_ETH_ACC_CORE_DEFAULT (IX_ETH_ACC_CORE_MDC_EN) + +#define IXP425_ETH_ACC_MAX_PHY 2 +#define IXP425_ETH_ACC_MAX_AN_ENTRIES 20 +#define IX_ETH_ACC_MAC_RESET_DELAY 1 + +#define IX_ETH_ACC_MAC_ALL_BITS_SET 0xFF + +#define IX_ETH_ACC_MAC_MSGID_SHL 24 + +#define IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS 20 +#define IX_ETH_ACC_PORT_DISABLE_DELAY_COUNT 200 /* 4 seconds timeout */ +#define IX_ETH_ACC_PORT_DISABLE_RETRY_COUNT 3 +#define IX_ETH_ACC_MIB_STATS_DELAY_MSECS 2000 /* 2 seconds delay for ethernet stats */ + +/*Register access macros*/ +#if (CPU == SIMSPARCSOLARIS) +extern void registerWriteStub (UINT32 base, UINT32 offset, UINT32 val); +extern UINT32 registerReadStub (UINT32 base, UINT32 offset); + +#define REG_WRITE(b,o,v) registerWriteStub(b, o, v) +#define REG_READ(b,o,v) do { v = registerReadStub(b, o); } while (0) +#else +#define REG_WRITE(b,o,v) IX_OSAL_WRITE_LONG((volatile UINT32 *)(b + o), v) +#define REG_READ(b,o,v) (v = IX_OSAL_READ_LONG((volatile UINT32 *)(b + o))) + +#endif + +void ixEthAccMacUnload(void); +IxEthAccStatus ixEthAccMacMemInit(void); + +/* MAC core loopback */ +IxEthAccStatus ixEthAccPortLoopbackEnable(IxEthAccPortId portId); +IxEthAccStatus ixEthAccPortLoopbackDisable(IxEthAccPortId portId); + +/* MAC core traffic control */ +IxEthAccStatus ixEthAccPortTxEnablePriv(IxEthAccPortId portId); +IxEthAccStatus ixEthAccPortTxDisablePriv(IxEthAccPortId portId); +IxEthAccStatus ixEthAccPortRxEnablePriv(IxEthAccPortId portId); +IxEthAccStatus ixEthAccPortRxDisablePriv(IxEthAccPortId portId); +IxEthAccStatus ixEthAccPortMacResetPriv(IxEthAccPortId portId); + +/* NPE software loopback */ +IxEthAccStatus ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId); +IxEthAccStatus ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId); + +#endif /*IxEthAccMac_p_H*/ + diff --git a/drivers/net/npe/include/IxEthAccMii_p.h b/drivers/net/npe/include/IxEthAccMii_p.h new file mode 100644 index 0000000000..568d4a0fa4 --- /dev/null +++ b/drivers/net/npe/include/IxEthAccMii_p.h @@ -0,0 +1,97 @@ +/** + * @file IxEthAccMii_p.h + * + * @author Intel Corporation + * @date + * + * @brief MII Header file + * + * Design Notes: + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxEthAccMii_p_H +#define IxEthAccMii_p_H + +/* MII definitions - these have been verified against the LXT971 and LXT972 PHYs*/ + +#define IXP425_ETH_ACC_MII_MAX_REG 32 /* max register per phy */ + +#define IX_ETH_ACC_MII_REG_SHL 16 +#define IX_ETH_ACC_MII_ADDR_SHL 21 + +/* Definitions for MII access routines*/ + +#define IX_ETH_ACC_MII_GO BIT(31) +#define IX_ETH_ACC_MII_WRITE BIT(26) +#define IX_ETH_ACC_MII_TIMEOUT_10TH_SECS 5 +#define IX_ETH_ACC_MII_10TH_SEC_IN_MILLIS 100 +#define IX_ETH_ACC_MII_READ_FAIL BIT(31) + +#define IX_ETH_ACC_MII_PHY_DEF_DELAY 300 /* max delay before link up, etc. */ +#define IX_ETH_ACC_MII_PHY_NO_DELAY 0x0 /* do not delay */ +#define IX_ETH_ACC_MII_PHY_NULL 0xff /* PHY is not present */ +#define IX_ETH_ACC_MII_PHY_DEF_ADDR 0x0 /* default PHY's logical address */ + +#ifndef IX_ETH_ACC_MII_MONITOR_DELAY +# define IX_ETH_ACC_MII_MONITOR_DELAY 0x5 /* in seconds */ +#endif + +/* Register definition */ + +#define IX_ETH_ACC_MII_CTRL_REG 0x0 /* Control Register */ +#define IX_ETH_ACC_MII_STAT_REG 0x1 /* Status Register */ +#define IX_ETH_ACC_MII_PHY_ID1_REG 0x2 /* PHY identifier 1 Register */ +#define IX_ETH_ACC_MII_PHY_ID2_REG 0x3 /* PHY identifier 2 Register */ +#define IX_ETH_ACC_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */ + /* Advertisement Register */ +#define IX_ETH_ACC_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */ + /* partner ability Register */ +#define IX_ETH_ACC_MII_AN_EXP_REG 0x6 /* Auto-Negotiation */ + /* Expansion Register */ +#define IX_ETH_ACC_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */ + /* next-page transmit Register */ + +IxEthAccStatus ixEthAccMdioShow (void); +IxEthAccStatus ixEthAccMiiInit(void); +void ixEthAccMiiUnload(void); + +#endif /*IxEthAccMii_p_H*/ diff --git a/drivers/net/npe/include/IxEthAccQueueAssign_p.h b/drivers/net/npe/include/IxEthAccQueueAssign_p.h new file mode 100644 index 0000000000..e5fd16e2fb --- /dev/null +++ b/drivers/net/npe/include/IxEthAccQueueAssign_p.h @@ -0,0 +1,137 @@ +/** + * @file IxEthAccQueueAssign_p.h + * + * @author Intel Corporation + * @date 06-Mar-2002 + * + * @brief Mapping from QMgr Q's to internal assignment + * + * Design Notes: + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @addtogroup IxEthAccPri + *@{ + */ + +/* + * Os/System dependancies. + */ +#include "IxOsal.h" + +/* + * Intermodule dependancies + */ +#include "IxQMgr.h" +#include "IxQueueAssignments.h" + +/* Check range of Q's assigned to this component. */ +#if IX_ETH_ACC_RX_FRAME_ETH_Q >= (IX_QMGR_MIN_QUEUPP_QID ) | \ + IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ + IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ + IX_ETH_ACC_TX_FRAME_ENET0_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ + IX_ETH_ACC_TX_FRAME_ENET1_Q >= (IX_QMGR_MIN_QUEUPP_QID) | \ + IX_ETH_ACC_TX_FRAME_DONE_ETH_Q >= (IX_QMGR_MIN_QUEUPP_QID) +#error "Not all Ethernet Access Queues are betweem 1-31, requires full functionalty Q's unless otherwise validated " +#endif + +/** +* +* @typedef IxEthAccQregInfo +* +* @brief +* +*/ +typedef struct +{ + IxQMgrQId qId; + char *qName; + IxQMgrCallback qCallback; + IxQMgrCallbackId callbackTag; + IxQMgrQSizeInWords qSize; + IxQMgrQEntrySizeInWords qWords; + BOOL qNotificationEnableAtStartup; + IxQMgrSourceId qConditionSource; + IxQMgrWMLevel AlmostEmptyThreshold; + IxQMgrWMLevel AlmostFullThreshold; + +} IxEthAccQregInfo; + +/* + * Prototypes for all QM callbacks. + */ + +/* + * Rx Callbacks + */ +IX_ETH_ACC_PUBLIC +void ixEthRxFrameQMCallback(IxQMgrQId, IxQMgrCallbackId); + +IX_ETH_ACC_PUBLIC +void ixEthRxMultiBufferQMCallback(IxQMgrQId, IxQMgrCallbackId); + +IX_ETH_ACC_PUBLIC +void ixEthRxFreeQMCallback(IxQMgrQId, IxQMgrCallbackId); + +/* + * Tx Callback. + */ +IX_ETH_ACC_PUBLIC +void ixEthTxFrameQMCallback(IxQMgrQId, IxQMgrCallbackId); + +IX_ETH_ACC_PUBLIC +void ixEthTxFrameDoneQMCallback(IxQMgrQId, IxQMgrCallbackId ); + + +#define IX_ETH_ACC_QM_QUEUE_DISPATCH_PRIORITY (IX_QMGR_Q_PRIORITY_0) /* Highest priority */ + +/* + * Queue watermarks + */ +#define IX_ETH_ACC_RX_FRAME_ETH_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_NOT_E ) +#define IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) +#define IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) +#define IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) +#define IX_ETH_ACC_TX_FRAME_ENET0_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) +#define IX_ETH_ACC_TX_FRAME_ENET1_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) +#define IX_ETH_ACC_TX_FRAME_ENET2_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_E ) +#define IX_ETH_ACC_TX_FRAME_DONE_ETH_Q_SOURCE (IX_QMGR_Q_SOURCE_ID_NOT_E ) diff --git a/drivers/net/npe/include/IxEthAcc_p.h b/drivers/net/npe/include/IxEthAcc_p.h new file mode 100644 index 0000000000..4e0de8235c --- /dev/null +++ b/drivers/net/npe/include/IxEthAcc_p.h @@ -0,0 +1,325 @@ +/** + * @file IxEthAcc_p.h + * + * @author Intel Corporation + * @date 12-Feb-2002 + * + * @brief Internal Header file for IXP425 Ethernet Access component. + * + * Design Notes: + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @addtogroup IxEthAccPri + *@{ + */ + +#ifndef IxEthAcc_p_H +#define IxEthAcc_p_H + +/* + * Os/System dependancies. + */ +#include "IxOsal.h" + +/* + * Intermodule dependancies + */ +#include "IxNpeDl.h" +#include "IxQMgr.h" + +#include "IxEthNpe.h" + +/* + * Intra module dependancies + */ + +#include "IxEthAccDataPlane_p.h" +#include "IxEthAccMac_p.h" + + +#define INLINE __inline__ + +#ifdef NDEBUG + +#define IX_ETH_ACC_PRIVATE static + +#else + +#define IX_ETH_ACC_PRIVATE + +#endif /* ndef NDEBUG */ + +#define IX_ETH_ACC_PUBLIC + + +#define IX_ETH_ACC_IS_PORT_VALID(port) ((port) < IX_ETH_ACC_NUMBER_OF_PORTS ? TRUE : FALSE ) + + + +#ifndef NDEBUG +#define IX_ETH_ACC_FATAL_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} +#define IX_ETH_ACC_WARNING_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_WARNING,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} +#define IX_ETH_ACC_DEBUG_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} +#else +#define IX_ETH_ACC_FATAL_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_FATAL,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} +#define IX_ETH_ACC_WARNING_LOG(a,b,c,d,e,f,g) { ixOsalLog ( IX_OSAL_LOG_LVL_WARNING,IX_OSAL_LOG_DEV_STDOUT,a,b,c,d,e,f,g);} +#define IX_ETH_ACC_DEBUG_LOG(a,b,c,d,e,f,g) {} +#endif + +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccInitDataPlane(void); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccQMgrQueuesConfig(void); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccQMgrRxCallbacksRegister(IxQMgrCallback ixQMgrCallback); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccSingleEthNpeCheck(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC void ixEthAccQMgrRxQEntryGet(UINT32 *numRxQueueEntries); + +/* prototypes for the private control plane functions (used by the control interface wrapper) */ +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortEnablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDisablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortEnabledQueryPriv(IxEthAccPortId portId, BOOL *enabled); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeClearPriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortPromiscuousModeSetPriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressSetPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastMacAddressGetPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressJoinPriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressJoinAllPriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressLeavePriv(IxEthAccPortId portId, IxEthAccMacAddr *macAddr); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortMulticastAddressLeaveAllPriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortUnicastAddressShowPriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC void ixEthAccPortMulticastAddressShowPriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDuplexModeSetPriv(IxEthAccPortId portId, IxEthAccDuplexMode mode); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortDuplexModeGetPriv(IxEthAccPortId portId, IxEthAccDuplexMode *mode); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendPaddingEnablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendPaddingDisablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendFCSEnablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortTxFrameAppendFCSDisablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortRxFrameAppendFCSEnablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccPortRxFrameAppendFCSDisablePriv(IxEthAccPortId portId); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccTxSchedulingDisciplineSetPriv(IxEthAccPortId portId, IxEthAccSchedulerDiscipline sched); +IX_ETH_ACC_PUBLIC IxEthAccStatus ixEthAccRxSchedulingDisciplineSetPriv(IxEthAccSchedulerDiscipline sched); + +/** + * @struct ixEthAccRxDataStats + * @brief Stats data structures for data path. - Not obtained from h/w + * + */ +typedef struct +{ + UINT32 rxFrameClientCallback; + UINT32 rxFreeRepOK; + UINT32 rxFreeRepDelayed; + UINT32 rxFreeRepFromSwQOK; + UINT32 rxFreeRepFromSwQDelayed; + UINT32 rxFreeLateNotificationEnabled; + UINT32 rxFreeLowCallback; + UINT32 rxFreeOverflow; + UINT32 rxFreeLock; + UINT32 rxDuringDisable; + UINT32 rxSwQDuringDisable; + UINT32 rxUnlearnedMacAddress; + UINT32 rxPriority[IX_ETH_ACC_TX_PRIORITY_7 + 1]; + UINT32 rxUnexpectedError; + UINT32 rxFiltered; +} IxEthAccRxDataStats; + +/** + * @struct IxEthAccTxDataStats + * @brief Stats data structures for data path. - Not obtained from h/w + * + */ +typedef struct +{ + UINT32 txQOK; + UINT32 txQDelayed; + UINT32 txFromSwQOK; + UINT32 txFromSwQDelayed; + UINT32 txLowThreshCallback; + UINT32 txDoneClientCallback; + UINT32 txDoneClientCallbackDisable; + UINT32 txOverflow; + UINT32 txLock; + UINT32 txPriority[IX_ETH_ACC_TX_PRIORITY_7 + 1]; + UINT32 txLateNotificationEnabled; + UINT32 txDoneDuringDisable; + UINT32 txDoneSwQDuringDisable; + UINT32 txUnexpectedError; +} IxEthAccTxDataStats; + +/* port Disable state machine : list of states */ +typedef enum +{ + /* general port states */ + DISABLED = 0, + ACTIVE, + + /* particular Tx/Rx states */ + REPLENISH, + RECEIVE, + TRANSMIT, + TRANSMIT_DONE +} IxEthAccPortDisableState; + +typedef struct +{ + BOOL fullDuplex; + BOOL rxFCSAppend; + BOOL txFCSAppend; + BOOL txPADAppend; + BOOL enabled; + BOOL promiscuous; + BOOL joinAll; + IxOsalMutex ackMIBStatsLock; + IxOsalMutex ackMIBStatsResetLock; + IxOsalMutex MIBStatsGetAccessLock; + IxOsalMutex MIBStatsGetResetAccessLock; + IxOsalMutex npeLoopbackMessageLock; + IxEthAccMacAddr mcastAddrsTable[IX_ETH_ACC_MAX_MULTICAST_ADDRESSES]; + UINT32 mcastAddrIndex; + IX_OSAL_MBUF *portDisableTxMbufPtr; + IX_OSAL_MBUF *portDisableRxMbufPtr; + + volatile IxEthAccPortDisableState portDisableState; + volatile IxEthAccPortDisableState rxState; + volatile IxEthAccPortDisableState txState; + + BOOL initDone; + BOOL macInitialised; +} IxEthAccMacState; + +/** + * @struct IxEthAccRxInfo + * @brief System-wide data structures associated with the data plane. + * + */ +typedef struct +{ + IxQMgrQId higherPriorityQueue[IX_QMGR_MAX_NUM_QUEUES]; /**< higher priority queue list */ + IxEthAccSchedulerDiscipline schDiscipline; /**< Receive Xscale QoS type */ +} IxEthAccInfo; + +/** + * @struct IxEthAccRxDataInfo + * @brief Per Port data structures associated with the receive data plane. + * + */ +typedef struct +{ + IxQMgrQId rxFreeQueue; /**< rxFree Queue for this port */ + IxEthAccPortRxCallback rxCallbackFn; + UINT32 rxCallbackTag; + IxEthAccDataPlaneQList freeBufferList; + IxEthAccPortMultiBufferRxCallback rxMultiBufferCallbackFn; + UINT32 rxMultiBufferCallbackTag; + BOOL rxMultiBufferCallbackInUse; + IxEthAccRxDataStats stats; /**< Receive s/w stats */ +} IxEthAccRxDataInfo; + +/** + * @struct IxEthAccTxDataInfo + * @brief Per Port data structures associated with the transmit data plane. + * + */ +typedef struct +{ + IxEthAccPortTxDoneCallback txBufferDoneCallbackFn; + UINT32 txCallbackTag; + IxEthAccDataPlaneQList txQ[IX_ETH_ACC_NUM_TX_PRIORITIES]; /**< Transmit Q */ + IxEthAccSchedulerDiscipline schDiscipline; /**< Transmit Xscale QoS */ + IxQMgrQId txQueue; /**< txQueue for this port */ + IxEthAccTxDataStats stats; /**< Transmit s/w stats */ +} IxEthAccTxDataInfo; + + +/** + * @struct IxEthAccPortDataInfo + * @brief Per Port data structures associated with the port data plane. + * + */ +typedef struct +{ + BOOL portInitialized; + UINT32 npeId; /**< NpeId for this port */ + IxEthAccTxDataInfo ixEthAccTxData; /**< Transmit data control structures */ + IxEthAccRxDataInfo ixEthAccRxData; /**< Receive data control structures */ +} IxEthAccPortDataInfo; + +extern IxEthAccPortDataInfo ixEthAccPortData[]; +#define IX_ETH_IS_PORT_INITIALIZED(port) (ixEthAccPortData[port].portInitialized) + +extern BOOL ixEthAccServiceInit; +#define IX_ETH_ACC_IS_SERVICE_INITIALIZED() (ixEthAccServiceInit == TRUE ) + +/* + * Maximum number of frames to consume from the Rx Frame Q. + */ + +#define IX_ETH_ACC_MAX_RX_FRAME_CONSUME_PER_CALLBACK (128) + +/* + * Max number of times to load the Rx Free Q from callback. + */ +#define IX_ETH_ACC_MAX_RX_FREE_BUFFERS_LOAD (256) /* Set greater than depth of h/w Q + drain time at line rate */ + +/* + * Max number of times to read from the Tx Done Q in one sitting. + */ + +#define IX_ETH_ACC_MAX_TX_FRAME_DONE_CONSUME_PER_CALLBACK (256) + +/* + * Max number of times to take buffers from S/w queues and write them to the H/w Tx + * queues on receipt of a Tx low threshold callback + */ + +#define IX_ETH_ACC_MAX_TX_FRAME_TX_CONSUME_PER_CALLBACK (16) + + +#define IX_ETH_ACC_FLUSH_CACHE(addr,size) IX_OSAL_CACHE_FLUSH((addr),(size)) +#define IX_ETH_ACC_INVALIDATE_CACHE(addr,size) IX_OSAL_CACHE_INVALIDATE((addr),(size)) + + +#define IX_ETH_ACC_MEMSET(start,value,size) memset(start,value,size) + +#endif /* ndef IxEthAcc_p_H */ + + + diff --git a/drivers/net/npe/include/IxEthDB.h b/drivers/net/npe/include/IxEthDB.h new file mode 100644 index 0000000000..1189c9a140 --- /dev/null +++ b/drivers/net/npe/include/IxEthDB.h @@ -0,0 +1,2373 @@ +/** @file IxEthDB.h + * + * @brief this file contains the public API of @ref IxEthDB component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * + */ + +#ifndef IxEthDB_H +#define IxEthDB_H + +#include <IxOsBuffMgt.h> +#include <IxTypes.h> + +/** + * @defgroup IxEthDB IXP400 Ethernet Database (IxEthDB) API + * + * @brief ethDB is a library that does provides a MAC address database learning/filtering capability + * + *@{ + */ + +#define INLINE __inline__ + +#define IX_ETH_DB_PRIVATE PRIVATE /* imported from IxTypes.h */ + +#define IX_ETH_DB_PUBLIC PUBLIC + +/** + * @brief port ID => message handler NPE id conversion (0 => NPE_B, 1 => NPE_C) + */ +#define IX_ETH_DB_PORT_ID_TO_NPE(id) (id == 0 ? 1 : (id == 1 ? 2 : (id == 2 ? 0 : -1))) + +/** + * @def IX_ETH_DB_NPE_TO_PORT_ID(npe) + * @brief message handler NPE id => port ID conversion (NPE_B => 0, NPE_C => 1) + */ +#define IX_ETH_DB_NPE_TO_PORT_ID(npe) (npe == 0 ? 2 : (npe == 1 ? 0 : (npe == 2 ? 1 : -1))) + +/* temporary define - won't work for Azusa */ +#define IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(id) (IX_ETH_DB_PORT_ID_TO_NPE(id) << 4) +#define IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(id) (IX_ETH_DB_NPE_TO_PORT_ID(id >> 4)) + +/** + * @def IX_IEEE803_MAC_ADDRESS_SIZE + * @brief The size of the MAC address + */ +#define IX_IEEE803_MAC_ADDRESS_SIZE (6) + +/** + * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT + * @brief Number of QoS priorities defined by IEEE802.1Q + */ +#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8) + +/** + * @enum IxEthDBStatus + * @brief Ethernet Database API return values + */ +typedef enum /* IxEthDBStatus */ +{ + IX_ETH_DB_SUCCESS = IX_SUCCESS, /**< Success */ + IX_ETH_DB_FAIL = IX_FAIL, /**< Failure */ + IX_ETH_DB_INVALID_PORT, /**< Invalid port */ + IX_ETH_DB_PORT_UNINITIALIZED, /**< Port not initialized */ + IX_ETH_DB_MAC_UNINITIALIZED, /**< MAC not initialized */ + IX_ETH_DB_INVALID_ARG, /**< Invalid argument */ + IX_ETH_DB_NO_SUCH_ADDR, /**< Address not found for search or delete operations */ + IX_ETH_DB_NOMEM, /**< Learning database memory full */ + IX_ETH_DB_BUSY, /**< Learning database cannot complete operation, access temporarily blocked */ + IX_ETH_DB_END, /**< Database browser passed the end of the record set */ + IX_ETH_DB_INVALID_VLAN, /**< Invalid VLAN ID (valid range is 0..4094, 0 signifies no VLAN membership, used for priority tagged frames) */ + IX_ETH_DB_INVALID_PRIORITY, /**< Invalid QoS priority/traffic class (valid range for QoS priority is 0..7, valid range for traffic class depends on run-time configuration) */ + IX_ETH_DB_NO_PERMISSION, /**< No permission for attempted operation */ + IX_ETH_DB_FEATURE_UNAVAILABLE, /**< Feature not available (or not enabled) */ + IX_ETH_DB_INVALID_KEY, /**< Invalid search key */ + IX_ETH_DB_INVALID_RECORD_TYPE /**< Invalid record type */ +} IxEthDBStatus; + +/** @brief VLAN ID type, valid range is 0..4094, 0 signifying no VLAN membership */ +typedef UINT32 IxEthDBVlanId; + +/** @brief 802.1Q VLAN tag, contains 3 bits user priority, 1 bit CFI, 12 bits VLAN ID */ +typedef UINT32 IxEthDBVlanTag; + +/** @brief QoS priority/traffic class type, valid range is 0..7, 0 being the lowest */ +typedef UINT32 IxEthDBPriority; + +/** @brief Priority mapping table; 0..7 QoS priorities used to index, table contains traffic classes */ +typedef UINT8 IxEthDBPriorityTable[8]; + +/** @brief A 4096 bit array used to map the complete VLAN ID range */ +typedef UINT8 IxEthDBVlanSet[512]; + +#define IX_ETH_DB_802_1Q_VLAN_MASK (0xFFF) +#define IX_ETH_DB_802_1Q_QOS_MASK (0x7) + +#define IX_ETH_DB_802_1Q_MAX_VLAN_ID (0xFFE) + +/** + * @def IX_ETH_DB_SET_VLAN_ID + * @brief returns the given 802.1Q tag with the VLAN ID field substituted with the given VLAN ID + * + * This macro is used to change the VLAN ID in a 802.1Q tag. + * + * Example: + * + * tag = IX_ETH_DB_SET_VLAN_ID(tag, 32) + * + * inserts the VLAN ID "32" in the given tag. + */ +#define IX_ETH_DB_SET_VLAN_ID(vlanTag, vlanID) (((vlanTag) & 0xF000) | ((vlanID) & IX_ETH_DB_802_1Q_VLAN_MASK)) + +/** +* @def IX_ETH_DB_GET_VLAN_ID +* @brief returns the VLAN ID from the given 802.1Q tag +*/ +#define IX_ETH_DB_GET_VLAN_ID(vlanTag) ((vlanTag) & IX_ETH_DB_802_1Q_VLAN_MASK) + +#define IX_ETH_DB_GET_QOS_PRIORITY(vlanTag) (((vlanTag) >> 13) & IX_ETH_DB_802_1Q_QOS_MASK) + +#define IX_ETH_DB_SET_QOS_PRIORITY(vlanTag, priority) (((vlanTag) & 0x1FFF) | (((priority) & IX_ETH_DB_802_1Q_QOS_MASK) << 13)) + +#define IX_ETH_DB_CHECK_VLAN_TAG(vlanTag) { if(((vlanTag & 0xFFFF0000) != 0) || (IX_ETH_DB_GET_VLAN_ID(vlanTag) > 4094)) return IX_ETH_DB_INVALID_VLAN; } + +#define IX_ETH_DB_CHECK_VLAN_ID(vlanId) { if (vlanId > IX_ETH_DB_802_1Q_MAX_VLAN_ID) return IX_ETH_DB_INVALID_VLAN; } + +#define IX_IEEE802_1Q_VLAN_TPID (0x8100) + +typedef enum +{ + IX_ETH_DB_UNTAGGED_FRAMES = 0x1, /**< Accepts untagged frames */ + IX_ETH_DB_VLAN_TAGGED_FRAMES = 0x2, /**< Accepts tagged frames */ + IX_ETH_DB_PRIORITY_TAGGED_FRAMES = 0x4, /**< Accepts tagged frames with VLAN ID set to 0 (no VLAN membership) */ + IX_ETH_DB_ACCEPT_ALL_FRAMES = + IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES /**< Accepts all the frames */ +} IxEthDBFrameFilter; + +typedef enum +{ + IX_ETH_DB_PASS_THROUGH = 0x1, /**< Leave frame as-is */ + IX_ETH_DB_ADD_TAG = 0x2, /**< Add default port VLAN tag */ + IX_ETH_DB_REMOVE_TAG = 0x3 /**< Remove VLAN tag from frame */ +} IxEthDBTaggingAction; + +typedef enum +{ + IX_ETH_DB_FIREWALL_WHITE_LIST = 0x1, /**< Firewall operates in white-list mode (MAC address based admission) */ + IX_ETH_DB_FIREWALL_BLACK_LIST = 0x2 /**< Firewall operates in black-list mode (MAC address based blocking) */ +} IxEthDBFirewallMode; + +typedef enum +{ + IX_ETH_DB_FILTERING_RECORD = 0x01, /**< <table><caption> Filtering record </caption> + * <tr><td> MAC address <td> static/dynamic type <td> age + * </table> + */ + IX_ETH_DB_FILTERING_VLAN_RECORD = 0x02, /**< <table><caption> VLAN-enabled filtering record </caption> + * <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag + * </table> + */ + IX_ETH_DB_WIFI_RECORD = 0x04, /**< <table><caption> WiFi header conversion record </caption> + * <tr><td> MAC address <td> optional gateway MAC address <td> + * </table> + */ + IX_ETH_DB_FIREWALL_RECORD = 0x08, /**< <table><caption> Firewall record </caption> + * <tr><td> MAC address + * </table> + */ + IX_ETH_DB_GATEWAY_RECORD = 0x10, /**< <i>For internal use only</i> */ + IX_ETH_DB_MAX_RECORD_TYPE_INDEX = 0x10, /**< <i>For internal use only</i> */ + IX_ETH_DB_NO_RECORD_TYPE = 0, /**< None of the registered record types */ + IX_ETH_DB_ALL_FILTERING_RECORDS = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD, /**< All the filtering records */ + IX_ETH_DB_ALL_RECORD_TYPES = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | + IX_ETH_DB_WIFI_RECORD | IX_ETH_DB_FIREWALL_RECORD /**< All the record types registered within EthDB */ +} IxEthDBRecordType; + +typedef enum +{ + IX_ETH_DB_LEARNING = 0x01, /**< Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records */ + IX_ETH_DB_FILTERING = 0x02, /**< Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature */ + IX_ETH_DB_VLAN_QOS = 0x04, /**< VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes */ + IX_ETH_DB_FIREWALL = 0x08, /**< Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists */ + IX_ETH_DB_SPANNING_TREE_PROTOCOL = 0x10, /**< Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes */ + IX_ETH_DB_WIFI_HEADER_CONVERSION = 0x20 /**< WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data */ +} IxEthDBFeature; + +typedef UINT32 IxEthDBProperty; /**< Property ID type */ + +typedef enum +{ + IX_ETH_DB_INTEGER_PROPERTY = 0x1, /**< 4 byte unsigned integer type */ + IX_ETH_DB_STRING_PROPERTY = 0x2, /**< NULL-terminated string type of maximum 255 characters (including the terminator) */ + IX_ETH_DB_MAC_ADDR_PROPERTY = 0x3, /**< 6 byte MAC address type */ + IX_ETH_DB_BOOL_PROPERTY = 0x4 /**< 4 byte boolean type; can contain only TRUE and FALSE values */ +} IxEthDBPropertyType; + +/* list of supported properties for the IX_ETH_DB_VLAN_QOS feature */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY (0x01) /**< Property identifying number the supported number of traffic classes */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY (0x10) /**< Rx queue assigned to traffic class 0 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY (0x11) /**< Rx queue assigned to traffic class 1 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY (0x12) /**< Rx queue assigned to traffic class 2 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY (0x13) /**< Rx queue assigned to traffic class 3 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY (0x14) /**< Rx queue assigned to traffic class 4 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY (0x15) /**< Rx queue assigned to traffic class 5 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY (0x16) /**< Rx queue assigned to traffic class 6 */ +#define IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY (0x17) /**< Rx queue assigned to traffic class 7 */ + +/* private property used by EthAcc to indicate queue configuration complete */ +#define IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (0x18) + +/** + * + * @brief The IEEE 802.3 Ethernet MAC address structure. + * + * The data should be packed with bytes xx:xx:xx:xx:xx:xx + * + * @note The data must be packed in network byte order. + */ +typedef struct +{ + UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; +} IxEthDBMacAddr; + +/** + * @ingroup IxEthDB + * + * @brief Definition of an IXP400 port. + */ +typedef UINT32 IxEthDBPortId; + +/** + * @ingroup IxEthDB + * + * @brief Port dependency map definition + */ +typedef UINT8 IxEthDBPortMap[32]; + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBInit(void) + * + * @brief Initializes the Ethernet learning/filtering database + * + * @note calling this function multiple times does not constitute an error; + * redundant calls will be ignored, returning IX_ETH_DB_SUCCESS + * + * @retval IX_ETH_DB_SUCCESS initialization was successful + * @retval IX_ETH_DB_FAIL initialization failed (OS error) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBInit(void); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBUnload(void) + * + * @brief Stops and prepares the EthDB component for unloading. + * + * @retval IX_ETH_DB_SUCCESS de-initialization was successful + * @retval IX_ETH_DB_BUSY de-initialization failed, ports must be disabled first + * @retval IX_ETH_DB_FAIL de-initialization failed (OS error) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUnload(void); + +/** + * @ingroup IxEthDB + * + * @fn void ixEthDBPortInit(IxEthDBPortId portID) + * + * @brief Initializes a port + * + * This function is called automatically by the Ethernet Access + * ixEthAccPortInit() routine for Ethernet NPE ports and should be manually + * called for any user-defined port (any port that is not one of + * the two Ethernet NPEs). + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to be initialized + * + * @see IxEthDBPortDefs.h for port definitions + * + * @note calling this function multiple times does not constitute an error; + * redundant calls will be ignored + */ +IX_ETH_DB_PUBLIC +void ixEthDBPortInit(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) + * + * @brief Enables a port + * + * This function is called automatically from the Ethernet Access component + * ixEthAccPortEnable() routine for Ethernet NPE ports and should be manually + * called for any user-defined port (any port that is not one of + * the Ethernet NPEs). + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to enable processing on + * + * @retval IX_ETH_DB_SUCCESS if enabling is successful + * @retval IX_ETH_DB_FAIL if the enabling was not successful due to + * a message handler error + * @retval IX_ETH_DB_MAC_UNINITIALIZED the MAC address of this port was + * not initialized (only for Ethernet NPEs) + * @retval IX_ETH_DB_INVALID_PORT if portID is invalid + * + * @pre ixEthDBPortAddressSet needs to be called prior to enabling the port events + * for Ethernet NPEs + * + * @see ixEthDBPortAddressSet + * + * @see IxEthDBPortDefs.h for port definitions + * + * @note calling this function multiple times does not constitute an error; + * redundant calls will be ignored + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) + * + * @brief Disables processing on a port + * + * This function is called automatically from the Ethernet Access component + * ixEthAccPortDisable() routine for Ethernet NPE ports and should be manually + * called for any user-defined port (any port that is not one of + * the Ethernet NPEs). + * + * @note Calling ixEthAccPortDisable() will disable the respective Ethernet NPE. + * After Ethernet NPEs are disabled they are stopped therefore + * when re-enabled they need to be reset, downloaded with microcode and started. + * For learning to restart working the user needs to call again + * ixEthAccPortUnicastMacAddressSet or ixEthDBUnicastAddressSet + * with the respective port MAC address. + * Residual MAC addresses learnt before the port was disabled are deleted as soon + * as the port is disabled. This only applies to dynamic (learnt) entries, static + * entries do not dissapear when the port is disabled. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to disable processing on + * + * @retval IX_ETH_DB_SUCCESS if disabling is successful + * @retval IX_ETH_DB_FAIL if the disabling was not successful due to + * a message handler error + * @retval IX_ETH_DB_INVALID_PORT if portID is invalid + * + * @note calling this function multiple times after the first time completed successfully + * does not constitute an error; redundant calls will be ignored and return IX_ETH_DB_SUCCESS +*/ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Sets the port MAC address + * + * This function is to be called from the Ethernet Access component top-level + * ixEthDBUnicastAddressSet(). Event processing cannot be enabled for a port + * until its MAC address has been set. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port whose MAC address is set + * @param macAddr @ref IxEthDBMacAddr [in] - port MAC address + * + * @retval IX_ETH_DB_SUCCESS MAC address was set successfully + * @retval IX_ETH_DB_FAIL MAC address was not set due to a message handler failure + * @retval IX_ETH_DB_INVALID_PORT if the port is not an Ethernet NPE + * + * @see IxEthDBPortDefs.h for port definitions + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize) + * + * @brief Set the maximum frame size supported on the given port ID + * + * This functions set the maximum frame size supported on a specific port ID + * + * - Reentrant - yes + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to configure + * @param maximumFrameSize UINT32 [in] - maximum frame size to configure + * + * @retval IX_ETH_DB_SUCCESS the port is configured + * @retval IX_ETH_DB_PORT_UNINITIALIZED the port has not been initialized + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_INVALID_ARG size parameter is out of range + * @retval IX_ETH_DB_NO_PERMISSION selected port is not an Ethernet NPE + * @retval IX_FAIL unknown OS or NPE communication error + * + * @note + * This maximum frame size is used to filter the frames based on their + * destination addresses and the capabilities of the destination port. + * The mximum value that can be set for a NPE port is 16320. + * (IX_ETHNPE_ACC_FRAME_LENGTH_MAX) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Populate the Ethernet learning/filtering database with a static MAC address + * + * Populates the Ethernet learning/filtering database with a static MAC address. The entry will not be subject to aging. + * If there is an entry (static or dynamic) with the corresponding MAC address on any port this entry will take precedence. + * Any other entry with the same MAC address will be removed. + * + * - Reentrant - yes + * - ISR Callable - yes + * + * @param portID @ref IxEthDBPortId [in] - port ID to add the static address to + * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add + * + * @retval IX_ETH_DB_SUCCESS the add was successful + * @retval IX_ETH_DB_FAIL failed to populate the database entry + * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Populate the Ethernet learning/filtering database with a dynamic MAC address + * + * Populates the Ethernet learning/filtering database with a dynamic MAC address. This entry will be subject to normal + * aging function, if aging is enabled on its port. + * If there is an entry (static or dynamic) with the same MAC address on any port this entry will take precedence. + * Any other entry with the same MAC address will be removed. + * + * - Reentrant - yes + * - ISR Callable - yes + * + * @param portID @ref IxEthDBPortId [in] - port ID to add the dynamic address to + * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add + * + * @retval IX_ETH_DB_SUCCESS the add was successful + * @retval IX_ETH_DB_FAIL failed to populate the database entry + * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr) + * + * @brief Removes a MAC address entry from the Ethernet learning/filtering database + * + * @param macAddr IxEthDBMacAddr [in] - MAC address to remove + * + * - Reentrant - yes + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS the removal was successful + * @retval IX_ETH_DB_NO_SUCH_ADDR failed to remove the address (not in the database) + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Search the Ethernet learning/filtering database for the given MAC address and port ID + * + * This functions searches the database for a specific port ID and MAC address. Both the port ID + * and the MAC address have to match in order for the record to be reported as found. + * + * - Reentrant - yes + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to search for + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for + * + * @retval IX_ETH_DB_SUCCESS the record exists in the database + * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument + * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) + * + * @brief Search the Ethernet learning/filtering database for a MAC address and return the port ID + * + * Searches the database for a MAC address. The function returns the portID for the + * MAC address record, if found. If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. + * The portID is only valid if the function finds a match. + * + * - Reentrant - yes + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID the address belongs to (populated only on a successful search) + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for + * + * @retval IX_ETH_DB_SUCCESS the record exists in the database + * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database + * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) + * + * @brief Search the filtering database for a MAC address, return the port ID and reset the record age + * + * Searches the database for a MAC address. The function returns the portID for the + * MAC address record and resets the entry age to 0, if found. + * If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. + * The portID is only valid if the function finds a match. + * + * - Reentrant - yes + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS the MAC address was found + * @retval IX_ETH_DB_NO_SUCH_ADDR the MAC address was not found + * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @def IX_ETH_DB_MAINTENANCE_TIME + * + * @brief The @ref ixEthDBDatabaseMaintenance must be called by the user at a frequency of + * IX_ETH_DB_MAINTENANCE_TIME + * + */ +#define IX_ETH_DB_MAINTENANCE_TIME (1 * 60) /* 1 Minute */ + +/** + * @ingroup IxEthDB + * + * @def IX_ETH_DB_LEARNING_ENTRY_AGE_TIME + * + * @brief The define specifies the filtering database age entry time. Static entries older than + * IX_ETH_DB_LEARNING_ENTRY_AGE_TIME +/- IX_ETH_DB_MAINTENANCE_TIME shall be removed. + * + */ +#define IX_ETH_DB_LEARNING_ENTRY_AGE_TIME (15 * 60 ) /* 15 Mins */ + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID) + * + * @brief Disable the aging function for a specific port + * + * @param portID @ref IxEthDBPortId [in] - port ID to disable aging on + * + * - Reentrant - yes + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS aging disabled successfully + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID) + * + * @brief Enable the aging function for a specific port + * + * Enables the aging of dynamic MAC address entries stored in the learning/filtering database + * + * @note The aging function relies on the @ref ixEthDBDatabaseMaintenance being called with a period of + * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. + * + * - Reentrant - yes + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to enable aging on + * + * @retval IX_ETH_DB_SUCCESS aging enabled successfully + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn void ixEthDBDatabaseMaintenance(void) + * + * @brief Performs a maintenance operation on the Ethernet learning/filtering database + * + * In order to perform a database maintenance this function must be called every + * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. It should be called regardless of whether learning is + * enabled or not. + * + * - Reentrant - no + * - ISR Callable - no + * + * @note this function call will be ignored if the learning feature is disabled + */ +IX_ETH_DB_PUBLIC +void ixEthDBDatabaseMaintenance(void); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID) + * + * @brief This function displays the Mac Ethernet MAC address filtering tables. + * + * It displays the MAC address, port ID, entry type (dynamic/static),and age for + * the given port ID. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to display the MAC address entries + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized + * @retval IX_ETH_DB_FAIL record browser failed due to an internal busy or lock condition + * + * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead + * + * @see ixEthDBFilteringDatabaseShowRecords + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn void ixEthDBFilteringDatabaseShowAll(void) + * + * @brief Displays the MAC address recorded in the filtering database for all registered + * ports (see IxEthDBPortDefs.h), grouped by port ID. + * + * - Reentrant - no + * - ISR Callable - no + * + * @retval void + * + * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead + * + * @see ixEthDBFilteringDatabaseShowRecords + */ +IX_ETH_DB_PUBLIC +void ixEthDBFilteringDatabaseShowAll(void); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter) + * + * @brief This function displays per port database records, given a record type filter + * + * The supported record type filters are: + * + * - IX_ETH_DB_FILTERING_RECORD - displays the non-VLAN filtering records (MAC address, age, static/dynamic) + * - IX_ETH_DB_FILTERING_VLAN_RECORD - displays the VLAN filtering records (MAC address, age, static/dynamic, VLAN ID, CFI, QoS class) + * - IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD - displays the previous two types of records + * - IX_ETH_DB_WIFI_RECORD - displays the WiFi header conversion records (MAC address, optional gateway MAC address) and WiFi header conversion parameters (BBSID, Duration/ID) + * - IX_ETH_DB_FIREWALL_RECORD - displays the firewall MAC address table and firewall operating mode (white list/black list) + * - IX_ETH_DB_ALL_RECORD_TYPES - displays all the record types + * - IX_ETH_DB_NO_RECORD_TYPE - displays only the port status (no records are displayed) + * + * Additionally, the status of each port will be displayed, containg the following information: type, capabilities, enabled status, + * aging enabled status, group membership and maximum frame size. + * + * The port ID can either be an actual port or IX_ETH_DB_ALL_PORTS, in which case the requested information + * will be displayed for all the ports (grouped by port) + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID ID of the port to display information on (use IX_ETH_DB_ALL_PORTS for all the ports) + * @param recordFilter record type filter + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is invalid + * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) + * + * @brief Sets the dependency port map for a port + * + * @param portID ID of the port to set the dependency map to + * @param dependencyPortMap new dependency map (as bitmap, each bit set indicates a port being included) + * + * This function is used to share filtering information between ports. + * By adding a port into another port's dependency map the target port + * filtering data will import the filtering data from the port it depends on. + * Any changes to filtering data for a port - such as adding, updating or removing records - + * will trigger updates in the filtering information for all the ports depending on + * on the updated port. + * + * For example, if ports 2 and 3 are set in the port 0 dependency map the filtering + * information for port 0 will also include the filtering information from ports 2 and 3. + * Adding a record to port 2 will also trigger an update not only on port 2 but also on + * port 0. + * + * The dependency map is a 256 bit array where each bit corresponds to a port corresponding to the + * bit offset (bit 0 - port 0, bit 1 - port 1 etc). Setting a bit to 1 indicates that the corresponding + * port is the port map. For example, a dependency port map of 0x14 consists in the ports with IDs 2 and 4. + * Note that the last bit (offset 255) is reserved and should never be set (it will be automatically + * cleared by the function). + * + * By default, each port has a dependency port map consisting only of itself, i.e. + * + * @verbatim + IxEthDBPortMap portMap; + + // clear all ports from port map + memset(portMap, 0, sizeof (portMap)); + + // include portID in port map + portMap[portID / 8] = 1 << (portID % 8); + @endverbatim + * + * - Reentrant - no + * - ISR Callable - no + * + * @note Setting dependency maps is useful for NPE ports, which benefit from automatic updates + * of filtering information. Setting dependency maps for user-defined ports is not an error + * but will have no actual effect. + * + * @note Including a port in its own dependency map is not compulsory, however note that + * in this case updating the port will not trigger an update on the port itself, which + * might not be the intended behavior + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) + * + * @brief Retrieves the dependency port map for a port + * + * @param portID ID of the port to set the dependency map to + * @param dependencyPortMap location where the port dependency map is to be copied + * + * This function will copy the port dependency map to a user specified location. + * + * - Reentrant - no + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag) + * + * @brief Sets the default 802.1Q VLAN tag for a given port + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to set the default VLAN tag to + * @param vlanTag @ref IxEthDBVlanTag [in] - default 802.1Q VLAN tag + * + * The tag format has 16 bits and it is defined in the IEEE802.1Q specification. + * This tag will be used for tagging untagged frames (if enabled) and classifying + * unexpedited traffic into an internal traffic class (using the user priority field). + * + * <table border="1"> <caption> 802.1Q tag format </caption> + * <tr> <td> <b> 3 bits <td> <b> 1 bit <td> <b> 12 bits </b> + * <tr> <td> user priority <td> CFI <td> VID + * </table> + * + * User Priority : Defines user priority, giving eight (2^3) priority levels. IEEE 802.1P defines + * the operation for these 3 user priority bits + * + * CFI : Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for + * compatibility reason between Ethernet type network and Token Ring type network. If a frame received + * at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to an untagged port. + * + * VID : VLAN ID is the identification of the VLAN, which is basically used by the standard 802.1Q. + * It has 12 bits and allow the id entification of 4096 (2^12) VLANs. Of the 4096 possible VIDs, a VID of 0 + * is used to identify priority frames and value 4095 (FFF) is reserved, so the maximum possible VLAN + * configurations are 4,094. + * + * - Reentrant - no + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag + * + * @note a VLAN ID value of 0 indicates that the port is not part of any VLAN + * @note the value of the cannonical frame indicator (CFI) field is ignored, the + * field being used only in frame tagging operations + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag) + * + * @brief Retrieves the default 802.1Q port VLAN tag for a given port (see also @ref ixEthDBPortVlanTagSet) + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the default VLAN tag from + * @param vlanTag @ref IxEthDBVlanTag [out] - location to write the default port 802.1Q VLAN tag to + * + * - Reentrant - no + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid vlanTag pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag) + * + * @brief Sets the 802.1Q VLAN tag for a database record + * + * @param macAddr MAC address + * @param vlanTag 802.1Q VLAN tag + * + * This function is used together with @ref ixEthDBVlanTagGet to provide MAC-based VLAN classification support. + * Please note that the bridging application must contain specific code to make use of this feature (see below). + * + * VLAN tags can be set only in IX_ETH_DB_FILTERING_RECORD or IX_ETH_DB_FILTERING_VLAN_RECORD type records. + * If to an IX_ETH_DB_FILTERING_RECORD type record is added a VLAN tag the record type is automatically + * changed to IX_ETH_DB_FILTERING_VLAN_RECORD. Once this has occurred the record type will never + * revert to a non-VLAN type (unless deleted and re-added). + * + * Record types used for different purposes (such as IX_ETH_DB_WIFI_RECORD) will be ignored by + * this function. + * + * After using this function to associate a VLAN ID with a MAC address the VLAN ID can be extracted knowing the + * MAC address using @ref ixEthDBVlanTagGet. This mechanism can be used to implement MAC-based VLAN classification + * if a bridging application searches for the VLAN tag when receiving a frame based on the source MAC address + * (contained in the <i>ixp_ne_src_mac</i> field of the buffer header). + * If found in the database, the application can instruct the NPE to tag the frame by writing the VLAN tag + * in the <i>ixp_ne_vlan_tci</i> field of the buffer header. This way the NPE will inspect the Egress tagging + * rule associated with the given VLAN ID on the Tx port and tag the frame if Egress tagging on the VLAN is + * allowed. Additionally, Egress tagging can be forced by setting the <i>ixp_ne_tx_flags.tag_over</i> and + * <i>ixp_ne_tx_flags.tag_mode</i> flags in the buffer header. + * + * - Reentrant - no + * - ISR Callable - no + * + * @note this function will <b>not</b> add a filtering record, it can only be used to update an existing one + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer + * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found + * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag); + +/** + * @ingroup IxEthDB + * + * @fn ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag) + * + * @brief Retrieves the 802.1Q VLAN tag from a database record given the record MAC address + * + * @param macAddr MAC address + * @param vlanTag location to write the record 802.1Q VLAN tag to + * + * @note VLAN tags can be retrieved only from IX_ETH_DB_FILTERING_VLAN_RECORD type records + * + * This function is used together with ixEthDBVlanTagSet to provide MAC-based VLAN classification support. + * Please note that the bridging application must contain specific code to make use of this feature (see @ref ixEthDBVlanTagSet). + * + * - Reentrant - no + * - ISR Callable - no + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>vlanTag</i> pointer + * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID) + * + * @brief Adds a VLAN ID to a port's VLAN membership table + * + * Adding a VLAN ID to a port's VLAN membership table will cause frames tagged with the specified + * VLAN ID to be accepted by the frame filter, if Ingress VLAN membership filtering is enabled. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to add the VLAN ID membership to + * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be added to the port membership table + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + * + * @note A port's default VLAN ID is always in its own membership table, hence there + * is no need to explicitly add it using this function (although it is not an error + * to do so) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) + * + * @brief Adds a VLAN ID range to a port's VLAN membership table + * + * All the VLAN IDs in the specified range will be added to the port VLAN + * membership table, including the range start and end VLAN IDs. Tagged frames with + * VLAN IDs in the specified range will be accepted by the frame filter, if Ingress VLAN + * membership filtering is enabled. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to add the VLAN membership range into + * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range + * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + * + * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case this + * function will behave as @ref ixEthDBPortVlanMembershipAdd + * + * @note A port's default VLAN ID is always in its own membership table, hence there is no need + * to explicitly add it using this function (although it is not an error to do so) + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID) + * + * @brief Removes a VLAN ID from a port's VLAN membership table + * + * Frames tagged with a VLAN ID which is not in a port's VLAN membership table + * will be discarded by the frame filter, if Ingress membership filtering is enabled. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN ID membership from + * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be removed from the port membership table + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID + * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID + * from the port membership table (vlanID was set to the default port VLAN ID) + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + * + * @note A port's default VLAN ID cannot be removed from the port's membership + * table; attempting it will return IX_ETH_DB_NO_PERMISSION + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) + * + * @brief Removes a VLAN ID range from a port's VLAN membership table + * + * All the VLAN IDs in the specified range will be removed from the port VLAN + * membership table, including the range start and end VLAN IDs. Tagged frames + * with VLAN IDs in the range will be discarded by the frame filter, if Ingress + * membership filtering is enabled. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN membership range from + * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range + * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range + * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID + * from the port membership table (both vlanIDMin and vlanIDMax were set to the default port VLAN ID) + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + * + * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case + * function will behave as @ref ixEthDBPortVlanMembershipRemove + * + * @note If the given range overlaps the default port VLAN ID this function + * will remove all the VLAN IDs in the range except for the port VLAN ID from its + * own membership table. This situation will be silently dealt with (no error message + * will be returned) as long as the range contains more than one value (i.e. at least + * one other value, apart from the default port VLAN ID). If the function is called + * with the vlanIDMin and vlanIDMax parameters both set to the port default VLAN ID, the + * function will infer that an attempt was specifically made to remove the default port + * VLAN ID from the port membership table, in which case the return value will be + * IX_ETH_DB_NO_PERMISSION. + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) + * + * @brief Sets a port's VLAN membership table + * + * Sets a port's VLAN membership table from a complete VLAN table containing all the possible + * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit + * indicates whether the VLAN at that bit index is in the port's membership list (if set) or + * not (unset). + * + * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no + * other bit must be set if bit 0 is set. + * + * The bit at index 4095 is reserved and should never be set (it will be ignored if set). + * + * The bit referencing the same VLAN ID as the default port VLAN ID should always be set, as + * the membership list must contain at least the default port VLAN ID. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to set the VLAN membership table to + * @param vlanSet @ref IxEthDBVlanSet [in] - pointer to the VLAN membership table + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) + * + * @brief Retrieves a port's VLAN membership table + * + * Retrieves the complete VLAN membership table from a port, containing all the possible + * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit + * indicates whether the VLAN at that bit index is in the port's membership list (if set) or + * not (unset). + * + * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no + * other bit will be set if bit 0 is set. + * + * The bit at index 4095 is reserved and will not be set (it will be ignored if set). + * + * The bit referencing the same VLAN ID as the default port VLAN ID will always be set, as + * the membership list must contain at least the default port VLAN ID. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the VLAN membership table from + * @param vlanSet @ref IxEthDBVlanSet [out] - pointer a location where the VLAN membership table will be + * written to + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter) + * + * @brief Sets a port's acceptable frame type filter + * + * The acceptable frame type is one (or a combination) of the following values: + * - IX_ETH_DB_ACCEPT_ALL_FRAMES - accepts all the frames + * - IX_ETH_DB_UNTAGGED_FRAMES - accepts untagged frames + * - IX_ETH_DB_VLAN_TAGGED_FRAMES - accepts tagged frames + * - IX_ETH_DB_PRIORITY_TAGGED_FRAMES - accepts tagged frames with VLAN ID set to 0 (no VLAN membership) + * + * Except for using the exact values given above only the following combinations are valid: + * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES + * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_PRIORITY_TAGGED_FRAMES + * + * Please note that IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES is equivalent + * to IX_ETH_DB_ACCEPT_ALL_FRAMES. + * + * - Reentrant - no + * - ISR Callable - no + * + * @note by default the acceptable frame type filter is set to IX_ETH_DB_ACCEPT_ALL_FRAMES + * + * @note setting the acceptable frame type to PRIORITY_TAGGED_FRAMES is internally + * accomplished by changing the frame filter to VLAN_TAGGED_FRAMES and setting the + * VLAN membership list to include only VLAN ID 0; the membership list will need + * to be restored manually to an appropriate value if the acceptable frame type + * filter is changed back to ACCEPT_ALL_FRAMES or VLAN_TAGGED_FRAMES; failure to do so + * will filter all VLAN traffic bar frames tagged with VLAN ID 0 + * + * @param portID @ref IxEthDBPortId [in] - port ID to set the acceptable frame type filter to + * @param frameFilter @ref IxEthDBFrameFilter [in] - acceptable frame type filter + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid frame type filter + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter) + * + * @brief Retrieves a port's acceptable frame type filter + * + * For a description of the acceptable frame types see @ref ixEthDBAcceptableFrameTypeSet + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the acceptable frame type filter from + * @param frameFilter @ref IxEthDBFrameFilter [out] - location to store the acceptable frame type filter + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>frameFilter</i> pointer argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) + * + * @brief Sets a port's priority mapping table + * + * The priority mapping table is an 8x2 table mapping a QoS (user) priority into an internal + * traffic class. There are 8 valid QoS priorities (0..7, 0 being the lowest) which can be + * mapped into one of the 4 available traffic classes (0..3, 0 being the lowest). + * If a custom priority mapping table is not specified using this function the following + * default priority table will be used (as per IEEE 802.1Q and IEEE 802.1D): + * + * <table border="1"> <caption> QoS traffic classes </caption> + * <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b> + * <tr> <td> 0 <td> 1 <td> Best effort, default class for unexpedited traffic + * <tr> <td> 1 <td> 0 <td> Background traffic + * <tr> <td> 2 <td> 0 <td> Spare bandwidth + * <tr> <td> 3 <td> 1 <td> Excellent effort + * <tr> <td> 4 <td> 2 <td> Controlled load + * <tr> <td> 5 <td> 2 <td> Video traffic + * <tr> <td> 6 <td> 3 <td> Voice traffic + * <tr> <td> 7 <td> 3 <td> Network control + * </table> + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - port ID of the port to set the priority mapping table to + * @param priorityTable @ref IxEthDBPriorityTable [in] - location of the user priority table + * + * @note The provided table will be copied into internal data structures in EthDB and + * can be deallocated by the called after this function has completed its execution, if + * so desired + * + * @warning The number of available traffic classes differs depending on the NPE images + * and queue configuration. Check IxEthDBQoS.h for up-to-date information on the availability of + * traffic classes. Note that specifiying a traffic class in the priority map which exceeds + * the system availability will produce an IX_ETH_DB_INVALID_PRIORITY return error code and no + * priority will be remapped. + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>priorityTable</i> pointer + * @retval IX_ETH_DB_INVALID_PRIORITY at least one priority value exceeds + * the current number of available traffic classes + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) + * + * @brief Retrieves a port's priority mapping table + * + * The priority mapping table for the given port will be copied in the location + * specified by the caller using "priorityTable" + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID ID @ref IxEthDBPortId [in] - of the port to retrieve the priority mapping table from + * @param priorityTable @ref IxEthDBPriorityTable [out] - pointer to a user specified location where the table will be copied to + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid priorityTable pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass) + * + * @brief Sets one QoS/user priority => traffic class mapping in a port's priority mapping table + * + * This function establishes a mapping between a user (QoS) priority and an internal traffic class. + * The mapping will be saved in the port's priority mapping table. Use this function when not all + * the QoS priorities need remapping (see also @ref ixEthDBPriorityMappingTableSet) + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to + * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest) + * @param trafficClass @ref IxEthDBPriority [in] - internal traffic class, between 0 and 3 (0 being the lowest) + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_PRIORITY <i>userPriority</i> out of range or + * <i>trafficClass</i> is beyond the number of currently available traffic classes + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass) + * + * @brief Retrieves one QoS/user priority => traffic class mapping in a port's priority mapping table + * + * This function retrieves the internal traffic class associated with a QoS (user) priority from a given + * port's priority mapping table. Use this function when not all the QoS priority mappings are + * required (see also @ref ixEthDBPriorityMappingTableGet) + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to + * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest) + * @param trafficClass @ref IxEthDBPriority [out] - location to write the corresponding internal traffic class to + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_PRIORITY invalid userPriority value (out of range) + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_ETH_DB_INVALID_ARG invalid <i>trafficClass</i> pointer argument + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled) + * + * @brief Enables or disables Egress VLAN tagging for a port and a given VLAN + * + * This function enables or disables Egress VLAN tagging for the given port and VLAN ID. + * If the VLAN tagging for a certain VLAN ID is enabled then all the frames to be + * transmitted on the given port tagged with the same VLAN ID will be transmitted in a tagged format. + * If tagging is not enabled for the given VLAN ID, the VLAN tag from the frames matching + * this VLAN ID will be removed (the frames will be untagged). + * + * VLAN ID 4095 is reserved and should never be used with this function. + * VLAN ID 0 has the special meaning of "No VLAN membership" and it is used in this + * context to allow the port to send priority-tagged frames or not. + * + * By default, no Egress VLAN tagging is enabled on any port. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on + * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be matched against outgoing frames + * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN, and + * FALSE to disable Egress VLAN tagging + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range) + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled) + * + * @brief Retrieves the Egress VLAN tagging enabling status for a port and VLAN ID + * + * @param portID [in] - ID of the port to extract the Egress VLAN ID tagging status from + * @param vlanID VLAN [in] - ID whose tagging status is to be extracted + * @param enabled [in] - user-specifed location where the status is copied to; following + * the successfull execution of this function the value will be TRUE if Egress VLAN + * tagging is enabled for the given port and VLAN ID, and FALSE otherwise + * + * - Reentrant - no + * - ISR Callable - no + * + * @see ixEthDBEgressVlanEntryTaggingEnabledGet + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range) + * @retval IX_ETH_DB_INVALID_ARG invalid <i>enabled</i> argument pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled) + * + * @brief Enables or disables Egress VLAN tagging for a port and given VLAN range + * + * This function is very similar to @ref ixEthDBEgressVlanEntryTaggingEnabledSet with the + * difference that it can manipulate the Egress tagging status on multiple VLAN IDs, + * defined by a contiguous range. Note that both limits in the range are explicitly + * included in the execution of this function. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on + * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN range to be matched against outgoing frames + * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN range to be matched against outgoing frames + * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN range, + * and FALSE to disable Egress VLAN tagging + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range), or do not constitute a range + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_ETH_DB_NO_PERMISSION attempted to explicitly remove the default port VLAN ID from the tagging table + * @retval IX_FAIL unknown OS or NPE communication error + * + * @note Specifically removing the default port VLAN ID from the Egress tagging table by setting both vlanIDMin and vlanIDMax + * to the VLAN ID portion of the PVID is not allowed by this function and will return IX_ETH_DB_NO_PERMISSION. + * However, this can be circumvented, should the user specifically desire this, by either using a + * larger range (vlanIDMin < vlanIDMax) or by using ixEthDBEgressVlanEntryTaggingEnabledSet. + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) + * + * @brief Sets the complete Egress VLAN tagging table for a port + * + * This function is used to set the VLAN tagging/untagging per VLAN ID for a given port + * covering the entire VLAN ID range (0..4094). The <i>vlanSet</i> parameter is a 4096 + * bit array, each bit indicating the Egress behavior for the corresponding VLAN ID. + * If a bit is set then outgoing frames with the corresponding VLAN ID will be transmitted + * with the VLAN tag, otherwise the frame will be transmitted without the VLAN tag. + * + * Bit 0 has a special significance, indicating tagging or tag removal for priority-tagged + * frames. + * + * Bit 4095 is reserved and should never be set (it will be ignored if set). + * + * - Reentrant - no + * - ISR Callable - no + * + * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is set + * @param vlanSet @ref IxEthDBVlanSet [in] - 4096 bit array controlling per-VLAN tagging and untagging + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + * + * @warning This function will automatically add the default port VLAN ID to the Egress tagging table + * every time it is called. The user should manually call ixEthDBEgressVlanEntryTaggingEnabledSet to + * prevent tagging on the default port VLAN ID if the default behavior is not intended. + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) + * + * @brief Retrieves the complete Egress VLAN tagging table from a port + * + * This function copies the 4096 bit table controlling the Egress VLAN tagging into a user specified + * area. Each bit in the array indicates whether tagging for the corresponding VLAN (the bit position + * in the array) is enabled (the bit is set) or not (the bit is unset). + * + * Bit 4095 is reserved and should not be set (it will be ignored if set). + * + * @see ixEthDBEgressVlanTaggingEnabledSet + * + * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is retrieved + * @param vlanSet @ref IxEthDBVlanSet [out] - user location to copy the Egress tagging table into; should have + * room to store 4096 bits (512 bytes) + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction) + * + * @brief Sets the Ingress VLAN tagging behavior for a port + * + * A port's Ingress tagging behavior is controlled by the taggingAction parameter, + * which can take one of the following values: + * + * - IX_ETH_DB_PASS_THROUGH - leaves the frame unchanged (does not add or remove the VLAN tag) + * - IX_ETH_DB_ADD_TAG - adds the VLAN tag if not present, using the default port VID + * - IX_ETH_DB_REMOVE_TAG - removes the VLAN tag if present + * + * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set + * @param taggingAction @ref IxEthDBTaggingAction [in] - tagging behavior for the port + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction) + * + * @brief Retrieves the Ingress VLAN tagging behavior from a port (see @ref ixEthDBIngressVlanTaggingEnabledSet) + * + * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set + * @param taggingAction @ref IxEthDBTaggingAction [out] - location where the tagging behavior for the port is written to + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> pointer argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable) + * + * @brief Enables or disables port ID extraction + * + * This feature can be used in the situation when a multi-port device (e.g. a switch) + * is connected to an IXP4xx port and the device can provide incoming frame port + * identification by tagging the TPID field in the Ethernet frame. Enabling + * port extraction will instruct the NPE to copy the TPID field from the frame and + * place it in the <i>ixp_ne_src_port</i> of the <i>ixp_buf</i> header. In addition, + * the NPE restores the TPID field to 0. + * + * If the frame is not tagged the NPE will fill the <i>ixp_ne_src_port</i> with the + * port ID of the MII interface the frame was received from. + * + * The TPID field is the least significant byte of the type/length field, which is + * normally set to 0x8100 for 802.1Q-tagged frames. + * + * This feature is disabled by default. + * + * @param portID ID of the port to configure port ID extraction on + * @param enable TRUE to enable port ID extraction and FALSE to disable it + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet) + * + * @brief Retrieves the feature capability set for a port + * + * This function retrieves the feature capability set for a port or the common capabilities shared between all + * the ports, writing the feature capability set in a user specified location. + * + * The feature capability set will consist of a set formed by OR-ing one or more of the following values: + * - IX_ETH_DB_LEARNING - Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records + * - IX_ETH_DB_FILTERING - Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature + * - IX_ETH_DB_VLAN_QOS - VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes + * - IX_ETH_DB_FIREWALL - Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists + * - IX_ETH_DB_SPANNING_TREE_PROTOCOL - Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes + * - IX_ETH_DB_WIFI_HEADER_CONVERSION - WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data + * + * Note that EthDB provides only the LEARNING feature for non-NPE ports. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the capability set for + * (use IX_ETH_DB_ALL_PORTS to retrieve the common capabilities shared between all the ports) + * @param featureSet @ref IxEthDBFeature [out] - location where the capability set will be written to + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>featureSet</i> pointer + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled) + * + * @brief Enables or disables one or more EthDB features + * + * Selects one or more features (see @ref ixEthDBFeatureCapabilityGet for a description of the supported + * features) to be enabled or disabled on the selected port (or all the ports). + * + * Note that some features are mutually incompatible: + * - IX_ETH_DB_FILTERING is incompatible with IX_ETH_DB_WIFI_HEADER_CONVERSION + * + * Also note that some features require other features to be enabled: + * - IX_ETH_DB_FILTERING requires IX_ETH_DB_LEARNING + * + * This function will either enable the entire selected feature set for the selected port (or all the ports), + * in which case it will return IX_ETH_DB_SUCCESS, or in case of error it will not enable any feature at all + * and return an appropriate error message. + * + * The following features are enabled by default (for ports with the respective capability), + * for compatibility reasons with previous versions of CSR: + * - IX_ETH_DB_LEARNING + * - IX_ETH_DB_FILTERING + * + * All other features are disabled by default and require manual enabling using ixEthDBFeatureEnable. + * + * <b>Default settings for VLAN, QoS, Firewall and WiFi header conversion features:</b> + * + * <i>VLAN</i> + * + * When the VLAN/QoS feature is enabled for a port for the first time the default VLAN behavior + * of the port is set to be as <b>permissive</b> (it will accept all the frames) and + * <b>non-interferential</b> (it will not change any frames) as possible: + * - the port VLAN ID (VID) is set to 0 + * - the Ingress acceptable frame filter is set to accept all frames + * - the VLAN port membership is set to the complete VLAN range (0 - 4094) + * - the Ingress tagging mode is set to pass-through (will not change frames) + * - the Egress tagging mode is to send tagged frames in the entire VLAN range (0 - 4094) + * + * Note that further disabling and re-enabling the VLAN feature for a given port will not reset the port VLAN behavior + * to the settings listed above. Any VLAN settings made by the user are kept. + * + * <i>QoS</i> + * + * The following default priority mapping table will be used (as per IEEE 802.1Q and IEEE 802.1D): + * + * <table border="1"> <caption> QoS traffic classes </caption> + * <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b> + * <tr> <td> 0 <td> 1 <td> Best effort, default class for unexpedited traffic + * <tr> <td> 1 <td> 0 <td> Background traffic + * <tr> <td> 2 <td> 0 <td> Spare bandwidth + * <tr> <td> 3 <td> 1 <td> Excellent effort + * <tr> <td> 4 <td> 2 <td> Controlled load + * <tr> <td> 5 <td> 2 <td> Video traffic + * <tr> <td> 6 <td> 3 <td> Voice traffic + * <tr> <td> 7 <td> 3 <td> Network control + * </table> + * + * <i> Firewall </i> + * + * The port firewall is configured by default in <b>black-list mode</b>, and the firewall address table is empty. + * This means the firewall will not filter any frames until the feature is configured and the firewall table is + * downloaded to the NPE. + * + * <i> Spanning Tree </i> + * + * The port is set to <b>STP unblocked mode</b>, therefore it will accept all frames until re-configured. + * + * <i> WiFi header conversion </i> + * + * The WiFi header conversion database is empty, therefore no actual header conversion will take place until this + * feature is configured and the conversion table downloaded to the NPE. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the features on (use IX_ETH_DB_ALL_PORTS for all the ports) + * @param feature @ref IxEthDBFeature [in] - feature or feature set to enable or disable + * @param enabled BOOL [in] - TRUE to enable the feature and FALSE to disable it + * + * @note Certain features, from a functional point of view, cannot be disabled as such at NPE level; + * when such features are set to <i>disabled</i> using the EthDB API they will be configured in such + * a way to determine a behavior equivalent to the feature being disabled. As well as this, disabled + * features cannot be configured or accessed via the EthDB API (except for getting their status). + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_NO_PERMISSION attempted to enable mutually exclusive features, + * or a feature that depends on another feature which is not present or enabled + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE at least one of the features selected is unavailable + * @retval IX_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled) + * + * @brief Retrieves the availability and status of a feature set + * + * This function returns the availability and status for a feature set. + * Note that if more than one feature is selected (e.g. IX_ETH_DB_LEARNING | IX_ETH_DB_FILTERING) + * the "present" and "enabled" return values will be set to TRUE only if all the features in the + * feature set are present and enabled (not only some). + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param feature @ref IxEthDBFeature [in] - identifier of the feature to retrieve the status for + * @param present BOOL [out] - location where a boolean flag indicating whether this feature is present will be written to + * @param enabled BOOL [out] - location where a boolean flag indicating whether this feature is enabled will be written to + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG either <i>present</i> or <i>enabled</i> pointer argument is invalid + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value) + * + * @brief Retrieves the value of a feature property + * + * The EthDB features usually contain feature-specific properties describing or + * controlling how the feature operates. While essential properties (e.g. the + * firewall operating mode) have their own API, secondary properties can be + * retrieved using this function. + * + * Properties can be read-only or read-write. ixEthDBFeaturePropertyGet operates with + * both types of features. + * + * Properties have types associated with them. A descriptor indicating the property + * type is returned in the <i>type</i> argument for convenience. + * + * The currently supported properties and their corresponding features are as follows: + * + * <table border="1"> <caption> Properties for IX_ETH_DB_VLAN_QOS </caption> + * <tr> <td> <b> Property identifier <td> <b> Property type <td> <b> Property value <td> <b> Read-Only </b> + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> number of internal traffic classes <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 0 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 1 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 2 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 3 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 4 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 5 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 6 <td> Yes + * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 7 <td> Yes + * </table> + * + * @see ixEthDBFeaturePropertySet + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is retrieved + * @param property @ref IxEthDBProperty [in] - property identifier + * @param type @ref IxEthDBPropertyType [out] - location where the property type will be stored + * @param value void [out] - location where the property value will be stored + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>type</i> or <i>value</i> pointer arguments + * @retval IX_ETH_DB_FAIL incorrect property value or unknown error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value) + * + * @brief Sets the value of a feature property + * + * Unlike @ref ixEthDBFeaturePropertyGet, this function operates only with read-write properties + * + * The currently supported properties and their corresponding features are as follows: + * + * - IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (for IX_ETH_DB_VLAN_QOS): freezes the availability of traffic classes + * to the number of traffic classes currently in use + * + * Note that this function creates deep copies of the property values; once the function is invoked the client + * can free or reuse the memory area containing the original property value. + * + * Copy behavior for different property types is defined as follows: + * + * - IX_ETH_DB_INTEGER_PROPERTY - 4 bytes are copied from the source location + * - IX_ETH_DB_STRING_PROPERTY - the source string will be copied up to the NULL '\0' string terminator, maximum of 255 characters + * - IX_ETH_DB_MAC_ADDR_PROPERTY - 6 bytes are copied from the source location + * - IX_ETH_DB_BOOL_PROPERTY - 4 bytes are copied from the source location; the only allowed values are TRUE (1L) and false (0L) + * + * @see ixEthDBFeaturePropertySet + * + * @warning IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE is provided for EthAcc internal use; + * do not attempt to set this property directly + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is set + * @param property @ref IxEthDBProperty [in] - property identifier + * @param value void [in] - location where the property value is to be copied from + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>value</i> pointer, or invalid property value + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType) + * + * @brief Deletes a set of record types from the Ethernet Database + * + * This function deletes all the records of certain types (specified in the recordType filter) + * associated with a port. Additionally, the IX_ETH_DB_ALL_PORTS value can be used as port ID + * to indicate that the specified record types should be deleted for all the ports. + * + * The record type filter can be an ORed combination of the following types: + * + * <caption> Record types </caption> + * - IX_ETH_DB_FILTERING_RECORD <table><caption> Filtering record </caption> + * <tr><td> MAC address <td> static/dynamic type <td> age </tr> + * </table> + * + * - IX_ETH_DB_FILTERING_VLAN_RECORD <table><caption> VLAN-enabled filtering record </caption> + * <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag </tr> + * </table> + * + * - IX_ETH_DB_WIFI_RECORD <table><caption> WiFi header conversion record </caption> + * <tr><td> MAC address <td> optional gateway MAC address <td> </tr> + * </table> + * + * - IX_ETH_DB_FIREWALL_RECORD <table><caption> Firewall record </caption> + * <tr><td> MAC address </tr> + * </table> + * - IX_ETH_DB_ALL_RECORD_TYPES + * + * Any combination of the above types is valid e.g. + * + * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | IX_ETH_DB_FIREWALL_RECORD), + * + * although some might be redundant (it is not an error to do so) e.g. + * + * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_ALL_RECORD_TYPES) + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param recordType @ref IxEthDBRecordType [in] - record type filter + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_INVALID_ARG invalid <i>recordType</i> filter + * + * @note If the record type filter contains any unrecognized value (hence the + * IX_ETH_DB_INVALID_ARG error value is returned) no actual records will be deleted. + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Adds an "Access Point to Station" record to the database, for 802.3 => 802.11 frame + * header conversion + * + * Frame header conversion is controlled by the set of MAC addresses + * added using @ref ixEthDBWiFiStationEntryAdd and @ref ixEthDBWiFiAccessPointEntryAdd. + * Conversion arguments are added using @ref ixEthDBWiFiFrameControlSet, + * @ref ixEthDBWiFiDurationIDSet and @ref ixEthDBWiFiBBSIDSet. + * + * Note that adding the same MAC address twice will not return an error + * (but will not accomplish anything either), while re-adding a record previously added + * as an "Access Point to Access Point" will migrate the record to the "Access Point + * to Station" type. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_NOMEM maximum number of records reached + * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) + * + * @brief Adds an "Access Point to Access Point" record to the database + * + * @see ixEthDBWiFiStationEntryAdd + * + * Note that adding the same MAC address twice will simply overwrite the previously + * defined gateway MAC address value in the same record, if the record was previously of the + * "Access Point to Access Point" type. + * + * Re-adding a MAC address as "Access Point to Access Point", which was previously added as + * "Access Point to Station" will migrate the record type to "Access Point to Access Point" and + * record the gateway MAC address. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add + * @param gatewayMacAddr @ref IxEthDBMacAddr [in] - MAC address of the gateway Access Point + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>gatewayMacAddr</i> pointer argument + * @retval IX_ETH_DB_NOMEM maximum number of records reached + * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Removes a WiFi station record + * + * This function removes both types of WiFi records ("Access Point to Station" and + * "Access Point to Access Point"). + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to remove + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_NO_SUCH_ADDR specified address was not found in the database + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID) + * + * @brief Downloads the MAC address table for 802.3 => 802.11 frame header + * conversion to the NPE + * + * Note that the frame conversion MAC address table must be individually downloaded + * to each NPE for which the frame header conversion feature is enabled (i.e. it + * is not possible to specify IX_ETH_DB_ALL_PORTS). + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl) + * + * @brief Sets the GlobalFrameControl field + * + * The GlobalFrameControl field is a 2-byte value inserted in the <i>Frame Control</i> + * field for all 802.3 to 802.11 frame header conversions + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param frameControl UINT16 [in] - GlobalFrameControl value + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID) + * + * @brief Sets the GlobalDurationID field + * + * The GlobalDurationID field is a 2-byte value inserted in the <i>Duration/ID</i> + * field for all 802.3 to 802.11 frame header conversions + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param durationID UINT16 [in] - GlobalDurationID field + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid) + * + * @brief Sets the BBSID field + * + * The BBSID field is a 6-byte value which + * identifies the infrastructure of the service set managed + * by the Access Point having the IXP400 as its processor. The value + * is written in the <i>BBSID</i> field of the 802.11 frame header. + * The BBSID value is the MAC address of the Access Point. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param bbsid @ref IxEthDBMacAddr [in] - pointer to 6 bytes containing the BSSID + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>bbsid</i> pointer argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked) + * + * @brief Sets the STP blocked/unblocked state for a port + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param blocked BOOL [in] - TRUE to set the port as STP blocked, FALSE to set it as unblocked + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked) + * + * @brief Retrieves the STP blocked/unblocked state for a port + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param blocked BOOL * [in] - set to TRUE if the port is STP blocked, FALSE otherwise + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>blocked</i> pointer argument + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode) + * + * @brief Sets the firewall mode to use white or black listing + * + * When enabled, the NPE MAC address based firewall support operates in two modes: + * + * - white-list mode (MAC address based admission) + * - <i>mode</i> set to IX_ETH_DB_FIREWALL_WHITE_LIST + * - only packets originating from MAC addresses contained in the firewall address list + * are allowed on the Rx path + * - black-list mode (MAC address based blocking) + * - <i>mode</i> set to IX_ETH_DB_FIREWALL_BLACK_LIST + * - packets originating from MAC addresses contained in the firewall address list + * are discarded + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param mode @ref IxEthDBFirewallMode [in] - firewall mode (IX_ETH_DB_FIREWALL_WHITE_LIST or IX_ETH_DB_FIREWALL_BLACK_LIST) + * + * @note by default the firewall operates in black-list mode with an empty address + * list, hence it doesn't filter any packets + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled + * @retval IX_ETH_DB_INVALID_ARGUMENT <i>mode</i> argument is not a valid firewall configuration mode + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error +*/ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode); + +/** + * @ingroup IxEthDB + * + * @fn ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable) + * + * @brief Enables or disables invalid MAC address filtering + * + * According to IEEE802 it is illegal for a source address to be a multicast + * or broadcast address. If this feature is enabled the NPE inspects the source + * MAC addresses of incoming frames and discards them if invalid addresses are + * detected. + * + * By default this service is enabled, if the firewall feature is supported by the + * NPE image. + * + * @param portID ID of the port + * @param enable TRUE to enable invalid MAC address filtering and FALSE to disable it + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Adds a MAC address to the firewall address list + * + * Note that adding the same MAC address twice will not return an error + * but will not actually accomplish anything. + * + * The firewall MAC address list has a limited number of entries; once + * the maximum number of entries has been reached this function will failed + * to add more addresses, returning IX_ETH_DB_NOMEM. + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be added + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_NOMEM maximum number of records reached + * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) + * + * @brief Removes a MAC address from the firewall address list + * + * @param portID @ref IxEthDBPortId [in] - ID of the port + * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be removed + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_NO_SUCH_ADDR address not found + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID) + * + * @brief Downloads the MAC firewall table to a port + * + * @param portID ID of the port + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier + * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized + * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled + * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field) + * + * @brief Adds a user-defined field to a database record + * + * This function associates a user-defined field to a database record. + * The user-defined field is passed as a <i>(void *)</i> parameter, hence it can be used + * for any purpose (such as identifying a structure). Retrieving the user-defined field from + * a record is done using @ref ixEthDBUserFieldGet. Note that EthDB never uses the user-defined + * field for any internal operation and it is not aware of the significance of its contents. The + * field is only stored as a pointer. + * + * The database record is identified using a combination of the given parameters, depending on the record type. + * All the record types require the record MAC address. + * + * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address + * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID + * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID + * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID + * + * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking). + * The user-defined field can be cleared using a <b>NULL</b> <i>field</i> parameter. + * + * @param recordType @ref IxEthDBRecordType [in] - type of record (can be IX_ETH_DB_FILTERING_RECORD, + * IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD or IX_ETH_DB_FIREWALL_RECORD) + * @param portID @ref IxEthDBPortId [in] - ID of the port (required only for WIFI and FIREWALL records) + * @param macAddr @ref IxEthDBMacAddr * [in] - MAC address of the record + * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID of the record (required only for FILTERING_VLAN records) + * @param field void * [in] - user defined field + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument + * @retval IX_ETH_DB_NO_SUCH_ADDR record not found + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field); + +/** + * @ingroup IxEthDB + * + * @fn IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field) + * + * @brief Retrieves a user-defined field from a database record + * + * The database record is identified using a combination of the given parameters, depending on the record type. + * All the record types require the record MAC address. + * + * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address + * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID + * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID + * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID + * + * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking). + * + * If no user-defined field was registered with the specified record then <b>NULL</b> will be written + * at the location specified by <i>field</i>. + * + * @param recordType type of record (can be IX_ETH_DB_FILTERING_RECORD, IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD + * or IX_ETH_DB_FIREWALL_RECORD) + * @param portID ID of the port (required only for WIFI and FIREWALL records) + * @param macAddr MAC address of the record + * @param vlanID VLAN ID of the record (required only for FILTERING_VLAN records) + * @param field location to write the user defined field into + * + * @retval IX_ETH_DB_SUCCESS operation completed successfully + * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier + * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>field</i> pointer arguments + * @retval IX_ETH_DB_NO_SUCH_ADDR record not found + */ +IX_ETH_DB_PUBLIC +IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portId, IxEthDBVlanId vlanID, void **field); + +/** + * @} + */ + +#endif /* IxEthDB_H */ diff --git a/drivers/net/npe/include/IxEthDBLocks_p.h b/drivers/net/npe/include/IxEthDBLocks_p.h new file mode 100644 index 0000000000..1d8b24fdf6 --- /dev/null +++ b/drivers/net/npe/include/IxEthDBLocks_p.h @@ -0,0 +1,122 @@ +/** + * @file IxEthAccDBLocks_p.h + * + * @brief Definition of transaction lock stacks and lock utility macros + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxEthAccDBLocks_p_H +#define IxEthAccDBLocks_p_H + +#include "IxOsPrintf.h" + +/* Lock and lock stacks */ +typedef struct +{ + IxOsalFastMutex* locks[MAX_LOCKS]; + UINT32 stackPointer, basePointer; +} LockStack; + +#define TRY_LOCK(mutex) \ + { \ + if (ixOsalFastMutexTryLock(mutex) != IX_SUCCESS) \ + { \ + return IX_ETH_DB_BUSY; \ + } \ + } + + +#define UNLOCK(mutex) { ixOsalFastMutexUnlock(mutex); } + +#define INIT_STACK(stack) \ + { \ + (stack)->basePointer = 0; \ + (stack)->stackPointer = 0; \ + } + +#define PUSH_LOCK(stack, lock) \ + { \ + if ((stack)->stackPointer == MAX_LOCKS) \ + { \ + ERROR_LOG("Ethernet DB: maximum number of elements in a lock stack has been exceeded on push, heavy chaining?\n"); \ + UNROLL_STACK(stack); \ + \ + return IX_ETH_DB_NOMEM; \ + } \ + \ + if (ixOsalFastMutexTryLock(lock) == IX_SUCCESS) \ + { \ + (stack)->locks[(stack)->stackPointer++] = (lock); \ + } \ + else \ + { \ + UNROLL_STACK(stack); \ + \ + return IX_ETH_DB_BUSY; \ + } \ + } + +#define POP_LOCK(stack) \ + { \ + ixOsalFastMutexUnlock((stack)->locks[--(stack)->stackPointer]); \ + } + +#define UNROLL_STACK(stack) \ + { \ + while ((stack)->stackPointer > (stack)->basePointer) \ + { \ + POP_LOCK(stack); \ + } \ + } + +#define SHIFT_STACK(stack) \ + { \ + if ((stack)->basePointer == MAX_LOCKS - 1) \ + { \ + ERROR_LOG("Ethernet DB: maximum number of elements in a lock stack has been exceeded on shift, heavy chaining?\n"); \ + UNROLL_STACK(stack); \ + \ + return IX_ETH_DB_BUSY; \ + } \ + \ + ixOsalFastMutexUnlock((stack)->locks[(stack)->basePointer++]); \ + } + +#endif /* IxEthAccDBLocks_p_H */ diff --git a/drivers/net/npe/include/IxEthDBLog_p.h b/drivers/net/npe/include/IxEthDBLog_p.h new file mode 100644 index 0000000000..1d6b0bb20d --- /dev/null +++ b/drivers/net/npe/include/IxEthDBLog_p.h @@ -0,0 +1,227 @@ +/** + * @file IxEthDBLog_p.h + * + * @brief definitions of log macros and log configuration + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include <IxOsal.h> + +#ifdef IX_UNIT_TEST +#define NULL_PRINT_ROUTINE(format, arg...) /* nothing */ +#else +#define NULL_PRINT_ROUTINE if(0) printf +#endif + +/*************************************************** + * Globals * + ***************************************************/ +/* safe to permanently leave these on */ +#define HAS_ERROR_LOG +#define HAS_ERROR_IRQ_LOG +#define HAS_WARNING_LOG + +/*************************************************** + * Log Configuration * + ***************************************************/ + +/* debug output can be turned on unless specifically + declared as a non-debug build */ +#ifndef NDEBUG + +#undef HAS_EVENTS_TRACE +#undef HAS_EVENTS_VERBOSE_TRACE + +#undef HAS_SUPPORT_TRACE +#undef HAS_SUPPORT_VERBOSE_TRACE + +#undef HAS_NPE_TRACE +#undef HAS_NPE_VERBOSE_TRACE +#undef HAS_DUMP_NPE_TREE + +#undef HAS_UPDATE_TRACE +#undef HAS_UPDATE_VERBOSE_TRACE + +#endif /* NDEBUG */ + + +/*************************************************** + * Log Macros * + ***************************************************/ + +/************** Globals ******************/ + +#ifdef HAS_ERROR_LOG + + #define ERROR_LOG printf + +#else + + #define ERROR_LOG NULL_PRINT_ROUTINE + +#endif + +#ifdef HAS_ERROR_IRQ_LOG + + #define ERROR_IRQ_LOG(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) + +#else + + #define ERROR_IRQ_LOG(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ + +#endif + +#ifdef HAS_WARNING_LOG + + #define WARNING_LOG printf + +#else + + #define WARNING_LOG NULL_PRINT_ROUTINE + +#endif + +/************** Events *******************/ + +#ifdef HAS_EVENTS_TRACE + + #define IX_ETH_DB_EVENTS_TRACE printf + #define IX_ETH_DB_IRQ_EVENTS_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) + + #ifdef HAS_EVENTS_VERBOSE_TRACE + + #define IX_ETH_DB_EVENTS_VERBOSE_TRACE printf + + #else + + #define IX_ETH_DB_EVENTS_VERBOSE_TRACE NULL_PRINT_ROUTINE + + #endif /* HAS_EVENTS_VERBOSE_TRACE */ + +#else + + #define IX_ETH_DB_EVENTS_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_EVENTS_VERBOSE_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_IRQ_EVENTS_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ + +#endif /* HAS_EVENTS_TRACE */ + +/************** Support *******************/ + +#ifdef HAS_SUPPORT_TRACE + + #define IX_ETH_DB_SUPPORT_TRACE printf + #define IX_ETH_DB_SUPPORT_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) + + #ifdef HAS_SUPPORT_VERBOSE_TRACE + + #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE printf + + #else + + #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE NULL_PRINT_ROUTINE + + #endif /* HAS_SUPPORT_VERBOSE_TRACE */ + +#else + + #define IX_ETH_DB_SUPPORT_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_SUPPORT_VERBOSE_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_SUPPORT_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ + +#endif /* HAS_SUPPORT_TRACE */ + +/************** NPE Adaptor *******************/ + +#ifdef HAS_NPE_TRACE + + #define IX_ETH_DB_NPE_TRACE printf + #define IX_ETH_DB_NPE_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) ixOsalLog(IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, format, arg1, arg2, arg3, arg4, arg5, arg6) + + #ifdef HAS_NPE_VERBOSE_TRACE + + #define IX_ETH_DB_NPE_VERBOSE_TRACE printf + + #else + + #define IX_ETH_DB_NPE_VERBOSE_TRACE NULL_PRINT_ROUTINE + + #endif /* HAS_NPE_VERBOSE_TRACE */ + +#else + + #define IX_ETH_DB_NPE_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_NPE_VERBOSE_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_NPE_IRQ_TRACE(format, arg1, arg2, arg3, arg4, arg5, arg6) /* nothing */ + +#endif /* HAS_NPE_TRACE */ + +#ifdef HAS_DUMP_NPE_TREE + +#define IX_ETH_DB_NPE_DUMP_ELT(eltBaseAddress, eltSize) ixEthELTDumpTree(eltBaseAddress, eltSize) + +#else + +#define IX_ETH_DB_NPE_DUMP_ELT(eltBaseAddress, eltSize) /* nothing */ + +#endif /* HAS_DUMP_NPE_TREE */ + +/************** Port Update *******************/ + +#ifdef HAS_UPDATE_TRACE + + #define IX_ETH_DB_UPDATE_TRACE printf + + #ifdef HAS_UPDATE_VERBOSE_TRACE + + #define IX_ETH_DB_UPDATE_VERBOSE_TRACE printf + + #else + + #define IX_ETH_DB_UPDATE_VERBOSE_TRACE NULL_PRINT_ROUTINE + + #endif + +#else /* HAS_UPDATE_VERBOSE_TRACE */ + + #define IX_ETH_DB_UPDATE_TRACE NULL_PRINT_ROUTINE + #define IX_ETH_DB_UPDATE_VERBOSE_TRACE NULL_PRINT_ROUTINE + +#endif /* HAS_UPDATE_TRACE */ diff --git a/drivers/net/npe/include/IxEthDBMessages_p.h b/drivers/net/npe/include/IxEthDBMessages_p.h new file mode 100644 index 0000000000..ff18160c1f --- /dev/null +++ b/drivers/net/npe/include/IxEthDBMessages_p.h @@ -0,0 +1,258 @@ +/** + * @file IxEthDBMessages_p.h + * + * @brief Definitions of NPE messages + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxEthDBMessages_p_H +#define IxEthDBMessages_p_H + +#include <IxEthNpe.h> +#include <IxOsCacheMMU.h> +#include "IxEthDB_p.h" + +/* events watched by the Eth event processor */ +#define IX_ETH_DB_MIN_EVENT_ID (IX_ETHNPE_EDB_GETMACADDRESSDATABASE) +#define IX_ETH_DB_MAX_EVENT_ID (IX_ETHNPE_PC_SETAPMACTABLE) + +/* macros to fill and extract data from NPE messages - place any endian conversions here */ +#define RESET_ELT_MESSAGE(message) { memset((void *) &(message), 0, sizeof((message))); } +#define NPE_MSG_ID(msg) ((msg).data[0] >> 24) + +#define FILL_SETPORTVLANTABLEENTRY_MSG(message, portID, setOffset, vlanMembershipSet, ttiSet) \ + do { \ + message.data[0] = (IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY << 24) | (portID << 16) | (setOffset * 2); \ + message.data[1] = (vlanMembershipSet << 8) | ttiSet; \ + } while (0); + +#define FILL_SETPORTVLANTABLERANGE_MSG(message, portID, offset, length, zone) \ + do { \ + message.data[0] = IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE << 24 | portID << 16 | offset << 9 | length << 1; \ + message.data[1] = (UINT32) zone; \ + } while (0); + +#define FILL_SETDEFAULTRXVID_MSG(message, portID, tpid, vlanTag) \ + do { \ + message.data[0] = (IX_ETHNPE_VLAN_SETDEFAULTRXVID << 24) \ + | (portID << 16); \ + \ + message.data[1] = (tpid << 16) | vlanTag; \ + } while (0); + +#define FILL_SETRXTAGMODE_MSG(message, portID, filterMode, tagMode) \ + do { \ + message.data[0] = IX_ETHNPE_VLAN_SETRXTAGMODE << 24 \ + | portID << 16 \ + | filterMode << 2 \ + | tagMode; \ + \ + message.data[1] = 0; \ + } while (0); + +#define FILL_SETRXQOSENTRY(message, portID, classIndex, trafficClass, aqmQueue) \ + do { \ + message.data[0] = IX_ETHNPE_VLAN_SETRXQOSENTRY << 24 \ + | portID << 16 \ + | classIndex; \ + \ + message.data[1] = trafficClass << 24 \ + | 0x1 << 23 \ + | aqmQueue << 16 \ + | aqmQueue << 4; \ + } while (0); + +#define FILL_SETPORTIDEXTRACTIONMODE(message, portID, enable) \ + do { \ + message.data[0] = IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE << 24 \ + | portID << 16 \ + | (enable ? 0x1 : 0x0); \ + \ + message.data[1] = 0; \ + } while (0); + + +#define FILL_SETBLOCKINGSTATE_MSG(message, portID, blocked) \ + do { \ + message.data[0] = IX_ETHNPE_STP_SETBLOCKINGSTATE << 24 \ + | portID << 16 \ + | (blocked ? 0x1 : 0x0); \ + \ + message.data[1] = 0; \ + } while (0); + +#define FILL_SETBBSID_MSG(message, portID, bbsid) \ + do { \ + message.data[0] = IX_ETHNPE_PC_SETBBSID << 24 \ + | portID << 16 \ + | bbsid->macAddress[0] << 8 \ + | bbsid->macAddress[1]; \ + \ + message.data[1] = bbsid->macAddress[2] << 24 \ + | bbsid->macAddress[3] << 16 \ + | bbsid->macAddress[4] << 8 \ + | bbsid->macAddress[5]; \ + } while (0); + +#define FILL_SETFRAMECONTROLDURATIONID(message, portID, frameControlDurationID) \ + do { \ + message.data[0] = (IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID << 24) | (portID << 16); \ + message.data[1] = frameControlDurationID; \ + } while (0); + +#define FILL_SETAPMACTABLE_MSG(message, zone) \ + do { \ + message.data[0] = IX_ETHNPE_PC_SETAPMACTABLE << 24 \ + | 0 << 8 /* always use index 0 */ \ + | 64; /* 32 entries, 8 bytes each, 4 bytes in a word */ \ + message.data[1] = (UINT32) zone; \ + } while (0); + +#define FILL_SETFIREWALLMODE_MSG(message, portID, epDelta, mode, address) \ + do { \ + message.data[0] = IX_ETHNPE_FW_SETFIREWALLMODE << 24 \ + | portID << 16 \ + | (epDelta & 0xFF) << 8 \ + | mode; \ + \ + message.data[1] = (UINT32) address; \ + } while (0); + +#define FILL_SETMACADDRESSDATABASE_MSG(message, portID, epDelta, blockCount, address) \ + do { \ + message.data[0] = IX_ETHNPE_EDB_SETMACADDRESSSDATABASE << 24 \ + | (epDelta & 0xFF) << 8 \ + | (blockCount & 0xFF); \ + \ + message.data[1] = (UINT32) address; \ + } while (0); + +#define FILL_GETMACADDRESSDATABASE(message, npeId, zone) \ + do { \ + message.data[0] = IX_ETHNPE_EDB_GETMACADDRESSDATABASE << 24; \ + message.data[1] = (UINT32) zone; \ + } while (0); + +#define FILL_SETMAXFRAMELENGTHS_MSG(message, portID, maxRxFrameSize, maxTxFrameSize) \ + do { \ + message.data[0] = IX_ETHNPE_SETMAXFRAMELENGTHS << 24 \ + | portID << 16 \ + | ((maxRxFrameSize + 63) / 64) << 8 /* max Rx 64-byte blocks */ \ + | (maxTxFrameSize + 63) / 64; /* max Tx 64-byte blocks */ \ + \ + message.data[1] = maxRxFrameSize << 16 | maxTxFrameSize; \ + } while (0); + +#define FILL_SETPORTADDRESS_MSG(message, portID, macAddress) \ + do { \ + message.data[0] = IX_ETHNPE_EDB_SETPORTADDRESS << 24 \ + | portID << 16 \ + | macAddress[0] << 8 \ + | macAddress[1]; \ + \ + message.data[1] = macAddress[2] << 24 \ + | macAddress[3] << 16 \ + | macAddress[4] << 8 \ + | macAddress[5]; \ + } while (0); + +/* access to a MAC node in the NPE tree */ +#define NPE_NODE_BYTE(eltNodeAddr, offset) (((UINT8 *) (eltNodeAddr))[offset]) + +/* browsing of the implicit linear binary tree structure of the NPE tree */ +#define LEFT_CHILD_OFFSET(offset) ((offset) << 1) +#define RIGHT_CHILD_OFFSET(offset) (((offset) << 1) + 1) + +#define IX_EDB_FLAGS_ACTIVE (0x2) +#define IX_EDB_FLAGS_VALID (0x1) +#define IX_EDB_FLAGS_RESERVED (0xfc) +#define IX_EDB_FLAGS_INACTIVE_VALID (0x1) + +#define IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET (6) +#define IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET (7) +#define IX_EDB_NPE_NODE_WIFI_INDEX_OFFSET (6) +#define IX_EDB_NPE_NODE_WIFI_FLAGS_OFFSET (7) +#define IX_EDB_NPE_NODE_FW_FLAGS_OFFSET (1) +#define IX_EDB_NPE_NODE_FW_RESERVED_OFFSET (6) +#define IX_EDB_NPE_NODE_FW_ADDR_OFFSET (2) + +#define IX_EDB_NPE_NODE_VALID(address) ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_VALID) != 0) +#define IX_EDB_NPE_NODE_ACTIVE(address) ((NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_FLAGS_OFFSET) & IX_EDB_FLAGS_ACTIVE) != 0) +#define IX_EDB_NPE_NODE_PORT_ID(address) (NPE_NODE_BYTE(address, IX_EDB_NPE_NODE_ELT_PORT_ID_OFFSET)) + +/* macros to send messages to the NPEs */ +#define IX_ETHDB_ASYNC_SEND_NPE_MSG(npeId, msg, result) \ + do { \ + result = ixNpeMhMessageSend(npeId, msg, IX_NPEMH_SEND_RETRIES_DEFAULT); \ + \ + if (result != IX_SUCCESS) \ + { \ + ERROR_LOG("DB: Failed to send NPE message\n"); \ + } \ + } while (0); + +#define IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result) \ + do { \ + result = ixNpeMhMessageWithResponseSend(npeId, msg, msg.data[0] >> 24, ixEthDBNpeMsgAck, IX_NPEMH_SEND_RETRIES_DEFAULT); \ + \ + if (result == IX_SUCCESS) \ + { \ + result = ixOsalMutexLock(&ixEthDBPortInfo[IX_ETH_DB_NPE_TO_PORT_ID(npeId)].npeAckLock, IX_ETH_DB_NPE_TIMEOUT); \ + \ + if (result != IX_SUCCESS) \ + { \ + ERROR_LOG("DB: NPE failed to respond within %dms\n", IX_ETH_DB_NPE_TIMEOUT); \ + } \ + } \ + else \ + { \ + ERROR_LOG("DB: Failed to send NPE message\n"); \ + } \ + } while (0); + +#ifndef IX_NDEBUG +#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100) +extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistory[IX_ETH_DB_NPE_MSG_HISTORY_DEPTH][2]; +extern IX_ETH_DB_PUBLIC UINT32 npeMsgHistoryLen; +#endif + +#define IX_ETHDB_SEND_NPE_MSG(npeId, msg, result) { LOG_NPE_MSG(msg); IX_ETHDB_SYNC_SEND_NPE_MSG(npeId, msg, result); } + +#endif /* IxEthDBMessages_p_H */ diff --git a/drivers/net/npe/include/IxEthDBPortDefs.h b/drivers/net/npe/include/IxEthDBPortDefs.h new file mode 100644 index 0000000000..c3acbdddef --- /dev/null +++ b/drivers/net/npe/include/IxEthDBPortDefs.h @@ -0,0 +1,163 @@ +/** + * @file IxEthDBPortDefs.h + * + * @brief Public definition of the ports and port capabilities + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxEthDBPortDefs IXP400 Ethernet Database Port Definitions (IxEthDBPortDefs) + * + * @brief IXP400 Public definition of the ports and port capabilities + * + * @{ + */ + +#ifndef IxEthDBPortDefs_H +#define IxEthDBPortDefs_H + +/** + * @brief Port types - currently only Ethernet NPEs are recognized as specific types + * All other (user-defined) ports must be specified as IX_ETH_GENERIC + */ +typedef enum +{ + IX_ETH_GENERIC = 0, /**< generic ethernet port */ + IX_ETH_NPE /**< specific Ethernet NPE */ +} IxEthDBPortType; + +/** + * @brief Port capabilities - used by ixEthAccDatabaseMaintenance to decide whether it + * should manually age entries or not depending on the port capabilities. + * + * Ethernet NPEs have aging capabilities, meaning that they will age the entries + * automatically (by themselves).*/ +typedef enum +{ + IX_ETH_NO_CAPABILITIES = 0, /**< no aging capabilities */ + IX_ETH_ENTRY_AGING = 0x1 /**< aging capabilities present */ +} IxEthDBPortCapability; + +/** + * @brief Port Definition - a structure contains the Port type and capabilities + */ +typedef struct +{ + IxEthDBPortType type; + IxEthDBPortCapability capabilities; +} IxEthDBPortDefinition; + +/** + * @brief Port definitions structure, indexed on the port ID + * @warning Ports 0 and 1 are used by the Ethernet access component therefore + * it is essential to be left untouched. Port 2 here (WAN) is given as + * an example port. The NPE firmware also assumes the NPE B to be + * the port 0 and NPE C to be the port 1. + * + * @note that only 32 ports (0..31) are supported by EthDB + */ +static const IxEthDBPortDefinition ixEthDBPortDefinitions[] = +{ + /* id type capabilities */ + { /* 0 */ IX_ETH_NPE, IX_ETH_NO_CAPABILITIES }, /* Ethernet NPE B */ + { /* 1 */ IX_ETH_NPE, IX_ETH_NO_CAPABILITIES }, /* Ethernet NPE C */ + { /* 2 */ IX_ETH_NPE, IX_ETH_NO_CAPABILITIES }, /* Ethernet NPE A */ + { /* 3 */ IX_ETH_GENERIC, IX_ETH_NO_CAPABILITIES }, /* WAN port */ +}; + +/** + * @def IX_ETH_DB_NUMBER_OF_PORTS + * @brief number of supported ports + */ +#define IX_ETH_DB_NUMBER_OF_PORTS (sizeof (ixEthDBPortDefinitions) / sizeof (ixEthDBPortDefinitions[0])) + +/** + * @def IX_ETH_DB_UNKNOWN_PORT + * @brief definition of an unknown port + */ +#define IX_ETH_DB_UNKNOWN_PORT (0xff) + +/** + * @def IX_ETH_DB_ALL_PORTS + * @brief Special port ID indicating all the ports + * @note This port ID can be used only by a subset of the EthDB API; each + * function specifically mentions whether this is a valid parameter as the port ID + */ +#define IX_ETH_DB_ALL_PORTS (IX_ETH_DB_NUMBER_OF_PORTS + 1) + +/** + * @def IX_ETH_DB_PORTS_ASSERTION + * @brief catch invalid port definitions (<2) with a + * compile-time assertion resulting in a duplicate case error. + */ +#define IX_ETH_DB_PORTS_ASSERTION { switch(0) { case 0 : ; case 1 : ; case IX_ETH_DB_NUMBER_OF_PORTS : ; }} + +/** + * @def IX_ETH_DB_CHECK_PORT(portID) + * @brief safety checks to verify whether the port is invalid or uninitialized + */ +#define IX_ETH_DB_CHECK_PORT(portID) \ +{ \ + if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ + { \ + return IX_ETH_DB_INVALID_PORT; \ + } \ + \ + if (!ixEthDBPortInfo[(portID)].enabled) \ + { \ + return IX_ETH_DB_PORT_UNINITIALIZED; \ + } \ +} + +/** + * @def IX_ETH_DB_CHECK_PORT_ALL(portID) + * @brief safety checks to verify whether the port is invalid or uninitialized; + * tolerates the use of IX_ETH_DB_ALL_PORTS + */ +#define IX_ETH_DB_CHECK_PORT_ALL(portID) \ +{ \ + if ((portID) != IX_ETH_DB_ALL_PORTS) \ + IX_ETH_DB_CHECK_PORT(portID) \ +} + +#endif /* IxEthDBPortDefs_H */ +/** + *@} + */ diff --git a/drivers/net/npe/include/IxEthDBQoS.h b/drivers/net/npe/include/IxEthDBQoS.h new file mode 100644 index 0000000000..6d34889452 --- /dev/null +++ b/drivers/net/npe/include/IxEthDBQoS.h @@ -0,0 +1,154 @@ +/** + * @file IxEthDBQoS.h + * + * @brief Public definitions for QoS traffic classes + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxEthDBPortDefs IXP400 Ethernet QoS definitions + * + * @brief IXP00 Public definitions for QoS traffic classes + * + * @{ + */ + +#ifndef IxEthDBQoS_H +#define IxEthDBQoS_H + +/** + * @def IX_ETH_DB_QUEUE_UNAVAILABLE + * @brief alias to indicate a queue (traffic class) is not available + */ +#define IX_ETH_DB_QUEUE_UNAVAILABLE (0) + +#ifndef IX_IEEE802_1Q_QOS_PRIORITY_COUNT +/** + * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT + * @brief number of QoS priorities, according to IEEE 802.1Q + */ +#define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8) +#endif + +/** + * @brief array containing all the supported traffic class configurations + */ +static const +UINT8 ixEthDBQueueAssignments[][IX_IEEE802_1Q_QOS_PRIORITY_COUNT] = +{ + { 4, 5, 6, 7, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE }, + { 15, 16, 17, 18, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE }, + { 11, 23, 26, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE, IX_ETH_DB_QUEUE_UNAVAILABLE }, + { 4, 5, 6, 7, 8, 9, 10, 11 } + /* add here all other cases of queue configuration structures and update ixEthDBTrafficClassDefinitions to use them */ +}; + +/** + * @brief value used to index the NPE A functionality ID in the traffic class definition table + */ +#define IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX (0) + +/** + * @brief value used to index the traffic class count in the traffic class definition table + */ +#define IX_ETH_DB_TRAFFIC_CLASS_COUNT_INDEX (1) + +/** + * @brief value used to index the queue assignment index in the traffic class definition table + */ +#define IX_ETH_DB_QUEUE_ASSIGNMENT_INDEX (2) + +/** + * @brief traffic class definitions + * + * This array contains the default traffic class definition configuration, + * as well as any special cases dictated by the functionality ID of NPE A. + * + * The default case should not be removed (otherwise the Ethernet + * components will assert a fatal failure on initialization). + */ +static const +UINT8 ixEthDBTrafficClassDefinitions[][3] = +{ + /* NPE A functionality ID | traffic class count | queue assignment index (points to the queue enumeration in ixEthDBQueueAssignments) */ + { 0x00, 4, 0 }, /* default case - DO NOT REMOVE */ + { 0x04, 4, 1 }, /* NPE A image ID 0.4.0.0 */ + { 0x09, 3, 2 }, /* NPE A image ID 0.9.0.0 */ + { 0x80, 8, 3 }, /* NPE A image ID 10.80.02.0 */ + { 0x81, 8, 3 }, /* NPE A image ID 10.81.02.0 */ + { 0x82, 8, 3 } /* NPE A image ID 10.82.02.0 */ +}; + +/** + * @brief IEEE 802.1Q recommended QoS Priority => traffic class maps + * + * @verbatim + Number of available traffic classes + 1 2 3 4 5 6 7 8 + QoS Priority + 0 0 0 0 1 1 1 1 2 + 1 0 0 0 0 0 0 0 0 + 2 0 0 0 0 0 0 0 1 + 3 0 0 0 1 1 2 2 3 + 4 0 1 1 2 2 3 3 4 + 5 0 1 1 2 3 4 4 5 + 6 0 1 2 3 4 5 5 6 + 7 0 1 2 3 4 5 6 7 + + @endverbatim + */ +static const +UINT8 ixEthIEEE802_1QUserPriorityToTrafficClassMapping[IX_IEEE802_1Q_QOS_PRIORITY_COUNT][IX_IEEE802_1Q_QOS_PRIORITY_COUNT] = + { + { 0, 0, 0, 0, 0, 0, 0, 0 }, /* 1 traffic class available */ + { 0, 0, 0, 0, 1, 1, 1, 1 }, /* 2 traffic classes available */ + { 0, 0, 0, 0, 1, 1, 2, 2 }, /* 3 traffic classes available */ + { 1, 0, 0, 1, 2, 2, 3, 3 }, /* 4 traffic classes available */ + { 1, 0, 0, 1, 2, 3, 4, 4 }, /* 5 traffic classes available */ + { 1, 0, 0, 2, 3, 4, 5, 5 }, /* 6 traffic classes available */ + { 1, 0, 0, 2, 3, 4, 5, 6 }, /* 7 traffic classes available */ + { 2, 0, 1, 3, 4, 5, 6, 7 } /* 8 traffic classes available */ + }; + +#endif /* IxEthDBQoS_H */ + +/** + *@} + */ diff --git a/drivers/net/npe/include/IxEthDB_p.h b/drivers/net/npe/include/IxEthDB_p.h new file mode 100644 index 0000000000..ccec7ea7be --- /dev/null +++ b/drivers/net/npe/include/IxEthDB_p.h @@ -0,0 +1,710 @@ +/** + * @file IxEthDB_p.h + * + * @brief Private MAC learning API + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxEthDB_p_H +#define IxEthDB_p_H + +#include <IxTypes.h> +#include <IxOsal.h> +#include <IxEthDB.h> +#include <IxNpeMh.h> +#include <IxEthDBPortDefs.h> + +#include "IxEthDBMessages_p.h" +#include "IxEthDBLog_p.h" + +#if (CPU==SIMSPARCSOLARIS) + +/* when running unit tests intLock() won't protect the event queue so we lock it manually */ +#define TEST_FIXTURE_LOCK_EVENT_QUEUE { ixOsalMutexLock(&eventQueueLock, IX_OSAL_WAIT_FOREVER); } +#define TEST_FIXTURE_UNLOCK_EVENT_QUEUE { ixOsalMutexUnlock(&eventQueueLock); } + +#else + +#define TEST_FIXTURE_LOCK_EVENT_QUEUE /* nothing */ +#define TEST_FIXTURE_UNLOCK_EVENT_QUEUE /* nothing */ + +#endif /* #if(CPU==SIMSPARCSOLARIS) */ + +#ifndef IX_UNIT_TEST + +#define TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER /* nothing */ +#define TEST_FIXTURE_MARK_OVERFLOW_EVENT /* nothing */ + +#else + +extern int dbAccessCounter; +extern int overflowEvent; + +#define TEST_FIXTURE_INCREMENT_DB_CORE_ACCESS_COUNTER { dbAccessCounter++; } +#define TEST_FIXTURE_MARK_OVERFLOW_EVENT { overflowEvent = 1; } + +#endif + +/* code readability markers */ +#define __mempool__ /* memory pool marker */ +#define __lock__ /* hash write locking marker */ +#define __smartpointer__ /* smart pointer marker - warning: use only clone() when duplicating! */ +#define __alignment__ /* marker for data used only as alignment zones */ + +/* constants */ +#define IX_ETH_DB_NPE_TIMEOUT (100) /* NPE response timeout, in ms */ + +/** + * number of hash table buckets + * it should be at least 8x the predicted number of entries for performance + * each bucket needs 8 bytes + */ +#define NUM_BUCKETS (8192) + +/** + * number of hash table buckets to preload when incrementing bucket iterator + * = two cache lines + */ +#define IX_ETHDB_CACHE_LINE_AHEAD (2) + +#define IX_ETHDB_BUCKETPTR_AHEAD ((IX_ETHDB_CACHE_LINE_AHEAD * IX_OSAL_CACHE_LINE_SIZE)/sizeof(void *)) + +#define IX_ETHDB_BUCKET_INDEX_MASK (((IX_OSAL_CACHE_LINE_SIZE)/sizeof(void *)) - 1) + +/* locks */ +#define MAX_LOCKS (20) /**< maximum number of locks used simultaneously, do not tamper with */ + +/* learning tree constants */ +#define INITIAL_ELT_SIZE (8) /**< initial byte size of tree (empty unused root size) */ +#define MAX_ELT_SIZE (512) /**< maximum number of entries (includes unused root) */ +#define MAX_GW_SIZE (32) /**< maximum number of gateway entries (including unused root) */ +#define MAX_FW_SIZE (32) /**< maximum number of firewall entries (including unused root) */ +#define ELT_ENTRY_SIZE (8) /**< entry size, in bytes */ +#define ELT_ROOT_OFFSET (ELT_ENTRY_SIZE) /**< tree root offset, in bytes - node preceeding root is unused */ +#define FULL_ELT_BYTE_SIZE (MAX_ELT_SIZE * ELT_ENTRY_SIZE) /**< full size of tree, in bytes, including unused root */ +#define FULL_GW_BYTE_SIZE (MAX_GW_SIZE * ELT_ENTRY_SIZE) /**< full size of gateway list, in bytes, including unused root */ +#define FULL_FW_BYTE_SIZE (MAX_FW_SIZE * ELT_ENTRY_SIZE) /**< full size of firewall table, in bytes, including unused root */ + +/* maximum size of the VLAN table: + * 4096 bits (one per VLAN) + * 8 bits in one byte + * interleaved VLAN membership and VLAN TTI (*2) */ +#define FULL_VLAN_BYTE_SIZE (4096 / 8 * 2) + +/* upper 9 bits used as set index, lower 3 bits as byte index */ +#define VLAN_SET_OFFSET(vlanID) ((vlanID) >> 3) +#define VLAN_SET_MASK(vlanID) (0x7 - ((vlanID) & 0x7)) + +/* Update zone definitions */ +#define NPE_TREE_MEM_SIZE (4096) /* ((511 entries + 1 unused root) * 8 bytes/entry) */ + +/* check the above value, we rely on 4k */ +#if NPE_TREE_MEM_SIZE != 4096 + #error NPE_TREE_MEM_SIZE is not defined to 4096 bytes! +#endif + +/* Size Filtering limits (Jumbo frame filtering) */ +#define IX_ETHDB_MAX_FRAME_SIZE 65535 /* other ports than NPE ports */ +#define IX_ETHDB_MIN_FRAME_SIZE 1 /* other ports than NPE ports */ +#define IX_ETHDB_MAX_NPE_FRAME_SIZE 16320 /* NPE ports firmware limit */ +#define IX_ETHDB_MIN_NPE_FRAME_SIZE 1 /* NPE ports firmware limit */ +#define IX_ETHDB_DEFAULT_FRAME_SIZE 1522 + +/* memory management pool sizes */ + +/* + * Note: + * + * NODE_POOL_SIZE controls the maximum number of elements in the database at any one time. + * It should be large enough to cover all the search trees of all the ports simultaneously. + * + * MAC_POOL_SIZE should be higher than NODE_POOL_SIZE by at least the total number of MAC addresses + * possible to be held at any time in all the ports. + * + * TREE_POOL_SIZE should follow the same guideline as for MAC_POOL_SIZE. + * + * The database structure described here (2000/4000/4000) is enough for two NPEs holding at most 511 + * entries each plus one PCI NIC holding at most 900 entries. + */ + +#define NODE_POOL_SIZE (2000) /**< number of HashNode objects - also master number of elements in the database; each entry has 16 bytes */ +#define MAC_POOL_SIZE (4000) /**< number of MacDescriptor objects; each entry has 28 bytes */ +#define TREE_POOL_SIZE (4000) /**< number of MacTreeNode objects; each entry has 16 bytes */ + +/* retry policies */ +#define BUSY_RETRY_ENABLED (TRUE) /**< if set to TRUE the API will retry automatically calls returning BUSY */ +#define FOREVER_RETRY (TRUE) /**< if set to TRUE the API will retry forever BUSY calls */ +#define MAX_RETRIES (400) /**< upper retry limit - used only when FOREVER_RETRY is FALSE */ +#define BUSY_RETRY_YIELD (5) /**< ticks to yield for every failed retry */ + +/* event management */ +#define EVENT_QUEUE_SIZE (500) /**< size of the sink collecting events from the Message Handler FIFO */ +#define EVENT_PROCESSING_LIMIT (100) /**< batch processing control size (how many events are extracted from the queue at once) */ + +/* MAC descriptors */ +#define STATIC_ENTRY (TRUE) +#define DYNAMIC_ENTRY (FALSE) + +/* age reset on next maintenance - incrementing by 1 will reset to 0 */ +#define AGE_RESET (0xFFFFFFFF) + +/* dependency maps */ +#define EMPTY_DEPENDENCY_MAP (0) + +/* trees */ +#define RIGHT (1) +#define LEFT (-1) + +/* macros */ +#define IX_ETH_DB_CHECK_PORT_EXISTS(portID) \ +{ \ + if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ + { \ + return IX_ETH_DB_INVALID_PORT; \ + } \ +} + +#define IX_ETH_DB_CHECK_PORT_INITIALIZED(portID) \ +{ \ + if ((portID) >= IX_ETH_DB_NUMBER_OF_PORTS) \ + { \ + return IX_ETH_DB_INVALID_PORT; \ + } \ + else \ + { \ + if (!ixEthDBPortInfo[portID].initialized) \ + { \ + return IX_ETH_DB_PORT_UNINITIALIZED; \ + } \ + } \ +} + +/* single NPE check */ +#define IX_ETH_DB_CHECK_SINGLE_NPE(portID) \ + if (ixEthDBSingleEthNpeCheck(portID) != IX_ETH_DB_SUCCESS) \ + { \ + WARNING_LOG("EthDB: port ID %d is unavailable\n",(UINT32) portID); \ + \ + return IX_ETH_DB_INVALID_PORT; \ + } + +/* feature check */ +#define IX_ETH_DB_CHECK_FEATURE(portID, feature) \ + if ((ixEthDBPortInfo[portID].featureStatus & feature) == 0) \ + { \ + return IX_ETH_DB_FEATURE_UNAVAILABLE; \ + } + +/* busy retrying */ +#define BUSY_RETRY(functionCall) \ + { \ + UINT32 retries = 0; \ + IxEthDBStatus br_result; \ + \ + while ((br_result = functionCall) == IX_ETH_DB_BUSY \ + && BUSY_RETRY_ENABLED && (FOREVER_RETRY || ++retries < MAX_RETRIES)) { ixOsalSleep(BUSY_RETRY_YIELD); }; \ + \ + if ((!FOREVER_RETRY && retries == MAX_RETRIES) || (br_result == IX_ETH_DB_FAIL)) \ + {\ + ERROR_LOG("Ethernet Learning Database Error: BUSY_RETRY failed at %s:%d\n", __FILE__, __LINE__); \ + }\ + } + +#define BUSY_RETRY_WITH_RESULT(functionCall, brwr_result) \ + { \ + UINT32 retries = 0; \ + \ + while ((brwr_result = functionCall) == IX_ETH_DB_BUSY \ + && BUSY_RETRY_ENABLED && (FOREVER_RETRY || ++retries < MAX_RETRIES)) { ixOsalSleep(BUSY_RETRY_YIELD); }; \ + \ + if ((!FOREVER_RETRY && retries == MAX_RETRIES) || (brwr_result == IX_ETH_DB_FAIL)) \ + {\ + ERROR_LOG("Ethernet Learning Database Error: BUSY_RETRY_WITH_RESULT failed at %s:%d\n", __FILE__, __LINE__); \ + }\ + } + +/* iterators */ +#define IS_ITERATOR_VALID(iteratorPtr) ((iteratorPtr)->node != NULL) + +/* dependency port maps */ + +/* Warning: if port indexing starts from 1 replace (portID) with (portID - 1) in DEPENDENCY_MAP (and make sure IX_ETH_DB_NUMBER_OF_PORTS is big enough) */ + +/* gives an empty dependency map */ +#define SET_EMPTY_DEPENDENCY_MAP(map) { int i = 0; for (; i < 32 ; i++) map[i] = 0; } + +#define IS_EMPTY_DEPENDENCY_MAP(result, map) { int i = 0 ; result = TRUE; for (; i < 32 ; i++) if (map[i] != 0) { result = FALSE; break; }} + +/** + * gives a map consisting only of 'portID' + */ +#define SET_DEPENDENCY_MAP(map, portID) {SET_EMPTY_DEPENDENCY_MAP(map); map[portID >> 3] = 1 << (portID & 0x7);} + +/** + * gives a map resulting from joining map1 and map2 + */ +#define JOIN_MAPS(map, map1, map2) { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] | map2[i]; } + +/** + * gives the map resulting from joining portID and map + */ +#define JOIN_PORT_TO_MAP(map, portID) { map[portID >> 3] |= 1 << (portID & 0x7); } + +/** + * gives the map resulting from excluding portID from map + */ +#define EXCLUDE_PORT_FROM_MAP(map, portID) { map[portID >> 3] &= ~(1 << (portID & 0x7); } + +/** + * returns TRUE if map1 is a subset of map2 and FALSE otherwise + */ +#define IS_MAP_SUBSET(result, map1, map2) { int i = 0; result = TRUE; for (; i < 32 ; i++) if ((map1[i] | map2[i]) != map2[i]) result = FALSE; } + +/** + * returns TRUE is portID is part of map and FALSE otherwise + */ +#define IS_PORT_INCLUDED(portID, map) ((map[portID >> 3] & (1 << (portID & 0x7))) != 0) + +/** + * returns the difference between map1 and map2 (ports included in map1 and not included in map2) + */ +#define DIFF_MAPS(map, map1, map2) { int i = 0; for (; i < 32 ; i++) map[i] = map1[i] ^ (map1[i] & map2[i]); } + +/** + * returns TRUE if the maps collide (have at least one port in common) and FALSE otherwise + */ +#define MAPS_COLLIDE(result, map1, map2) { int i = 0; result = FALSE; for (; i < 32 ; i++) if ((map1[i] & map2[i]) != 0) result = TRUE; } + +/* size (number of ports) of a dependency map */ +#define GET_MAP_SIZE(map, size) { int i = 0, b = 0; size = 0; for (; i < 32 ; i++) { char y = map[i]; for (; b < 8 && (y >>= 1); b++) size += (y & 1); }} + +/* copy map2 into map1 */ +#define COPY_DEPENDENCY_MAP(map1, map2) { memcpy (map1, map2, sizeof (map1)); } + +/* definition of a port map size/port number which cannot be reached (we support at most 32 ports) */ +#define MAX_PORT_SIZE (0xFF) +#define MAX_PORT_NUMBER (0xFF) + +#define IX_ETH_DB_CHECK_REFERENCE(ptr) { if ((ptr) == NULL) { return IX_ETH_DB_INVALID_ARG; } } +#define IX_ETH_DB_CHECK_MAP(portID, map) { if (!IS_PORT_INCLUDED(portID, map)) { return IX_ETH_DB_INVALID_ARG; } } + +/* event queue macros */ +#define EVENT_QUEUE_WRAP(offset) ((offset) >= EVENT_QUEUE_SIZE ? (offset) - EVENT_QUEUE_SIZE : (offset)) + +#define CAN_ENQUEUE(eventQueuePtr) ((eventQueuePtr)->length < EVENT_QUEUE_SIZE) + +#define QUEUE_HEAD(eventQueuePtr) (&(eventQueuePtr)->queue[EVENT_QUEUE_WRAP((eventQueuePtr)->base + (eventQueuePtr)->length)]) + +#define QUEUE_TAIL(eventQueuePtr) (&(eventQueuePtr)->queue[(eventQueuePtr)->base]) + +#define PUSH_UPDATE_QUEUE(eventQueuePtr) { (eventQueuePtr)->length++; } + +#define SHIFT_UPDATE_QUEUE(eventQueuePtr) \ + { \ + (eventQueuePtr)->base = EVENT_QUEUE_WRAP((eventQueuePtr)->base + 1); \ + (eventQueuePtr)->length--; \ + } + +#define RESET_QUEUE(eventQueuePtr) \ + { \ + (eventQueuePtr)->base = 0; \ + (eventQueuePtr)->length = 0; \ + } + +/* node stack macros - used to browse a tree without using a recursive function */ +#define NODE_STACK_INIT(stack) { (stack)->nodeCount = 0; } +#define NODE_STACK_PUSH(stack, node, offset) { (stack)->nodes[(stack)->nodeCount] = (node); (stack)->offsets[(stack)->nodeCount++] = (offset); } +#define NODE_STACK_POP(stack, node, offset) { (node) = (stack)->nodes[--(stack)->nodeCount]; offset = (stack)->offsets[(stack)->nodeCount]; } +#define NODE_STACK_NONEMPTY(stack) ((stack)->nodeCount != 0) + +#ifndef IX_NDEBUG +#define IX_ETH_DB_NPE_MSG_HISTORY_DEPTH (100) +#define LOG_NPE_MSG(msg) \ + do { \ + UINT32 npeMsgHistoryIndex = (npeMsgHistoryLen++) % IX_ETH_DB_NPE_MSG_HISTORY_DEPTH; \ + npeMsgHistory[npeMsgHistoryIndex][0] = msg.data[0]; \ + npeMsgHistory[npeMsgHistoryIndex][1] = msg.data[1]; \ + } while (0); +#else +#define LOG_NPE_MSG() /* nothing */ +#endif + +/* ----------- Data -------------- */ + +/* typedefs */ + +typedef UINT32 (*HashFunction)(void *entity); +typedef BOOL (*MatchFunction)(void *reference, void *entry); +typedef void (*FreeFunction)(void *entry); + +/** + * basic component of a hash table + */ +typedef struct HashNode_t +{ + void *data; /**< specific data */ + struct HashNode_t *next; /**< used for bucket chaining */ + + __mempool__ struct HashNode_t *nextFree; /**< memory pool management */ + + __lock__ IxOsalFastMutex lock; /**< node lock */ +} HashNode; + +/** + * @brief hash table iterator definition + * + * an iterator is an object which can be used + * to browse a hash table + */ +typedef struct +{ + UINT32 bucketIndex; /**< index of the currently iterated bucket */ + HashNode *previousNode; /**< reference to the previously iterated node within the current bucket */ + HashNode *node; /**< reference to the currently iterated node */ +} HashIterator; + +/** + * definition of a MAC descriptor (a database record) + */ + +typedef enum +{ + IX_ETH_DB_WIFI_AP_TO_STA = 0x0, + IX_ETH_DB_WIFI_AP_TO_AP = 0x1 +} IxEthDBWiFiRecordType; + +typedef union +{ + struct + { + UINT32 age; + BOOL staticEntry; /**< TRUE if this address is static (doesn't age) */ + } filteringData; + + struct + { + UINT32 age; + BOOL staticEntry; + UINT32 ieee802_1qTag; + } filteringVlanData; + + struct + { + IxEthDBWiFiRecordType type; /**< AP_TO_AP (0x1) or AP_TO_STA (0x0) */ + UINT32 gwAddressIndex; /**< used only when linearizing the entries for NPE usage */ + UINT8 gwMacAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; + + __alignment__ UINT8 reserved2[2]; + } wifiData; +} IxEthDBRecordData; + +typedef struct MacDescriptor_t +{ + UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; + + __alignment__ UINT8 reserved1[2]; + + UINT32 portID; + IxEthDBRecordType type; + IxEthDBRecordData recordData; + + /* used for internal operations, such as NPE linearization */ + void *internal; + + /* custom user data */ + void *user; + + __mempool__ struct MacDescriptor_t *nextFree; /**< memory pool management */ + __smartpointer__ UINT32 refCount; /**< smart pointer reference counter */ +} MacDescriptor; + +/** + * hash table definition + */ +typedef struct +{ + HashNode *hashBuckets[NUM_BUCKETS]; + UINT32 numBuckets; + + __lock__ IxOsalFastMutex bucketLocks[NUM_BUCKETS]; + + HashFunction entryHashFunction; + MatchFunction *matchFunctions; + FreeFunction freeFunction; +} HashTable; + +typedef enum +{ + IX_ETH_DB_MAC_KEY = 1, + IX_ETH_DB_MAC_PORT_KEY = 2, + IX_ETH_DB_MAC_VLAN_KEY = 3, + IX_ETH_DB_MAX_KEY_INDEX = 3 +} IxEthDBSearchKeyType; + +typedef struct MacTreeNode_t +{ + __smartpointer__ MacDescriptor *descriptor; + struct MacTreeNode_t *left, *right; + + __mempool__ struct MacTreeNode_t *nextFree; +} MacTreeNode; + +typedef IxEthDBStatus (*IxEthDBPortUpdateHandler)(IxEthDBPortId portID, IxEthDBRecordType type); + +typedef void (*IxEthDBNoteWriteFn)(void *address, MacTreeNode *node); + +typedef struct +{ + BOOL updateEnabled; /**< TRUE if updates are enabled for port */ + BOOL userControlled; /**< TRUE if the user has manually used ixEthDBPortUpdateEnableSet */ + BOOL treeInitialized; /**< TRUE if the NPE has received an initial tree */ + IxEthDBPortUpdateHandler updateHandler; /**< port update handler routine */ + void *npeUpdateZone; /**< port update memory zone */ + void *npeGwUpdateZone; /**< port update memory zone for gateways */ + void *vlanUpdateZone; /**< port update memory zone for VLAN tables */ + MacTreeNode *searchTree; /**< internal search tree, in MacTreeNode representation */ + BOOL searchTreePendingWrite; /**< TRUE if searchTree holds a tree pending write to the port */ +} PortUpdateMethod; + +typedef struct +{ + IxEthDBPortId portID; /**< port ID */ + BOOL enabled; /**< TRUE if the port is enabled */ + BOOL agingEnabled; /**< TRUE if aging on this port is enabled */ + BOOL initialized; + IxEthDBPortMap dependencyPortMap; /**< dependency port map for this port */ + PortUpdateMethod updateMethod; /**< update method structure */ + BOOL macAddressUploaded; /**< TRUE if the MAC address was uploaded into the port */ + UINT32 maxRxFrameSize; /**< maximum Rx frame size for this port */ + UINT32 maxTxFrameSize; /**< maximum Rx frame size for this port */ + + UINT8 bbsid[6]; + __alignment__ UINT8 reserved[2]; + UINT32 frameControlDurationID; /**< Frame Control - Duration/ID WiFi control */ + + IxEthDBVlanTag vlanTag; /**< default VLAN tag for port */ + IxEthDBPriorityTable priorityTable; /**< QoS <=> internal priority mapping */ + IxEthDBVlanSet vlanMembership; + IxEthDBVlanSet transmitTaggingInfo; + IxEthDBFrameFilter frameFilter; + IxEthDBTaggingAction taggingAction; + + UINT32 npeFrameFilter; + UINT32 npeTaggingAction; + + IxEthDBFirewallMode firewallMode; + BOOL srcAddressFilterEnabled; + + BOOL stpBlocked; + + IxEthDBFeature featureCapability; + IxEthDBFeature featureStatus; + + UINT32 ixEthDBTrafficClassAQMAssignments[IX_IEEE802_1Q_QOS_PRIORITY_COUNT]; + + UINT32 ixEthDBTrafficClassCount; + + UINT32 ixEthDBTrafficClassAvailable; + + + + __lock__ IxOsalMutex npeAckLock; +} PortInfo; + +/* list of port information structures indexed on port Ids */ +extern IX_ETH_DB_PUBLIC PortInfo ixEthDBPortInfo[IX_ETH_DB_NUMBER_OF_PORTS]; + +typedef enum +{ + IX_ETH_DB_ADD_FILTERING_RECORD = 0xFF0001, + IX_ETH_DB_REMOVE_FILTERING_RECORD = 0xFF0002 +} PortEventType; + +typedef struct +{ + UINT32 eventType; + IxEthDBPortId portID; + IxEthDBMacAddr macAddr; + BOOL staticEntry; +} PortEvent; + +typedef struct +{ + PortEvent queue[EVENT_QUEUE_SIZE]; + UINT32 base; + UINT32 length; +} PortEventQueue; + +typedef struct +{ + IxEthDBPortId portID; /**< originating port */ + MacDescriptor *macDescriptors[MAX_ELT_SIZE]; /**< addresses to be synced into db */ + UINT32 addressCount; /**< number of addresses */ +} TreeSyncInfo; + +typedef struct +{ + MacTreeNode *nodes[MAX_ELT_SIZE]; + UINT32 offsets[MAX_ELT_SIZE]; + UINT32 nodeCount; +} MacTreeNodeStack; + +/* Prototypes */ + +/* ----------- Memory management -------------- */ + +IX_ETH_DB_PUBLIC void ixEthDBInitMemoryPools(void); + +IX_ETH_DB_PUBLIC HashNode* ixEthDBAllocHashNode(void); +IX_ETH_DB_PUBLIC void ixEthDBFreeHashNode(HashNode *); + +IX_ETH_DB_PUBLIC __smartpointer__ MacDescriptor* ixEthDBAllocMacDescriptor(void); +IX_ETH_DB_PUBLIC __smartpointer__ MacDescriptor* ixEthDBCloneMacDescriptor(MacDescriptor *macDescriptor); +IX_ETH_DB_PUBLIC __smartpointer__ void ixEthDBFreeMacDescriptor(MacDescriptor *); + +IX_ETH_DB_PUBLIC __smartpointer__ MacTreeNode* ixEthDBAllocMacTreeNode(void); +IX_ETH_DB_PUBLIC __smartpointer__ MacTreeNode* ixEthDBCloneMacTreeNode(MacTreeNode *); +IX_ETH_DB_PUBLIC __smartpointer__ void ixEthDBFreeMacTreeNode(MacTreeNode *); + +IX_ETH_DB_PUBLIC void ixEthDBPoolFreeMacTreeNode(MacTreeNode *); +IX_ETH_DB_PUBLIC UINT32 ixEthDBSearchTreeUsageGet(MacTreeNode *tree); +IX_ETH_DB_PUBLIC int ixEthDBShowMemoryStatus(void); + +/* Hash Table */ +IX_ETH_DB_PUBLIC void ixEthDBInitHash(HashTable *hashTable, UINT32 numBuckets, HashFunction entryHashFunction, MatchFunction *matchFunctions, FreeFunction freeFunction); + +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAddHashEntry(HashTable *hashTable, void *entry); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemoveHashEntry(HashTable *hashTable, int keyType, void *reference); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBSearchHashEntry(HashTable *hashTable, int keyType, void *reference, HashNode **searchResult); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPeekHashEntry(HashTable *hashTable, int keyType, void *reference); +IX_ETH_DB_PUBLIC void ixEthDBReleaseHashNode(HashNode *node); + +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBInitHashIterator(HashTable *hashTable, HashIterator *iterator); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBIncrementHashIterator(HashTable *hashTable, HashIterator *iterator); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemoveEntryAtHashIterator(HashTable *hashTable, HashIterator *iterator); +IX_ETH_DB_PUBLIC void ixEthDBReleaseHashIterator(HashIterator *iterator); + +/* API Support */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); +IX_ETH_DB_PUBLIC void ixEthDBMaximumFrameSizeAckCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); + +/* DB Core functions */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBInit(void); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBAdd(MacDescriptor *newRecordTemplate, IxEthDBPortMap updateTrigger); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBRemove(MacDescriptor *templateRecord, IxEthDBPortMap updateTrigger); +IX_ETH_DB_PUBLIC HashNode* ixEthDBSearch(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPeek(IxEthDBMacAddr *macAddress, IxEthDBRecordType typeFilter); + +/* Learning support */ +IX_ETH_DB_PUBLIC UINT32 ixEthDBAddressCompare(UINT8 *mac1, UINT8 *mac2); +IX_ETH_DB_PUBLIC BOOL ixEthDBAddressMatch(void *reference, void *entry); +IX_ETH_DB_PUBLIC UINT32 ixEthDBEntryXORHash(void *macDescriptor); +IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyXORHash(void *macAddress); + +/* Port updates */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBNPEUpdateHandler(IxEthDBPortId portID, IxEthDBRecordType type); +IX_ETH_DB_PUBLIC void ixEthDBUpdatePortLearningTrees(IxEthDBPortMap triggerPorts); +IX_ETH_DB_PUBLIC void ixEthDBNPEAccessRequest(IxEthDBPortId portID); +IX_ETH_DB_PUBLIC void ixEthDBUpdateLock(void); +IX_ETH_DB_PUBLIC void ixEthDBUpdateUnlock(void); +IX_ETH_DB_PUBLIC MacTreeNode* ixEthDBQuery(MacTreeNode *searchTree, IxEthDBPortMap query, IxEthDBRecordType recordFilter, UINT32 maximumEntries); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFirewallUpdate(IxEthDBPortId portID, void *address, UINT32 epDelta); + +/* Init/unload */ +IX_ETH_DB_PUBLIC void ixEthDBPortSetAckCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBEventProcessorInit(void); +IX_ETH_DB_PUBLIC void ixEthDBPortInit(IxEthDBPortId portID); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID); +IX_ETH_DB_PUBLIC void ixEthDBNPEUpdateAreasInit(void); +IX_ETH_DB_PUBLIC UINT32 ixEthDBMatchMethodsRegister(MatchFunction *matchFunctions); +IX_ETH_DB_PUBLIC UINT32 ixEthDBRecordSerializeMethodsRegister(void); +IX_ETH_DB_PUBLIC UINT32 ixEthDBUpdateTypeRegister(BOOL *typeArray); +IX_ETH_DB_PUBLIC void ixEthDBNPEUpdateAreasUnload(void); +IX_ETH_DB_PUBLIC void ixEthDBFeatureCapabilityScan(void); +IX_ETH_DB_PUBLIC UINT32 ixEthDBKeyTypeRegister(UINT32 *keyType); + +/* Event processing */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBDefaultEventCallbackEnable(IxEthDBPortId portID, BOOL enable); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBTriggerAddPortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID, BOOL staticEntry); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBTriggerRemovePortUpdate(IxEthDBMacAddr *macAddr, IxEthDBPortId portID); +IX_ETH_DB_PUBLIC void ixEthDBNPEEventCallback(IxNpeMhNpeId npeID, IxNpeMhMessage msg); + +/* NPE adaptor */ +IX_ETH_DB_PUBLIC void ixEthDBGetMacDatabaseCbk(IxNpeMhNpeId npeID, IxNpeMhMessage msg); +IX_ETH_DB_PUBLIC void ixEthDBNpeMsgAck(IxNpeMhNpeId npeID, IxNpeMhMessage msg); +IX_ETH_DB_PUBLIC void ixEthDBNPESyncScan(IxEthDBPortId portID, void *eltBaseAddress, UINT32 eltSize); +IX_ETH_DB_PUBLIC void ixEthDBNPETreeWrite(IxEthDBRecordType type, UINT32 totalSize, void *baseAddress, MacTreeNode *tree, UINT32 *blocks, UINT32 *startIndex); +IX_ETH_DB_PUBLIC void ixEthDBNPEGatewayNodeWrite(void *address, MacTreeNode *node); + +/* Other public API functions */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStartLearningFunction(void); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBStopLearningFunction(void); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortUpdateEnableSet(IxEthDBPortId portID, BOOL enableUpdate); + +/* Maximum Tx/Rx public functions */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFilteringPortMaximumRxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumRxFrameSize); +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBFilteringPortMaximumTxFrameSizeSet(IxEthDBPortId portID, UINT32 maximumTxFrameSize); + +/* VLAN-related */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBPortVlanTableSet(IxEthDBPortId portID, IxEthDBVlanSet portVlanTable, IxEthDBVlanSet vlanSet); + +/* Record search */ +IX_ETH_DB_PUBLIC BOOL ixEthDBAddressRecordMatch(void *untypedReference, void *untypedEntry); +IX_ETH_DB_PUBLIC BOOL ixEthDBVlanRecordMatch(void *untypedReference, void *untypedEntry); +IX_ETH_DB_PUBLIC BOOL ixEthDBPortRecordMatch(void *untypedReference, void *untypedEntry); +IX_ETH_DB_PUBLIC BOOL ixEthDBNullMatch(void *reference, void *entry); +IX_ETH_DB_PUBLIC HashNode* ixEthDBPortSearch(IxEthDBMacAddr *macAddress, IxEthDBPortId portID, IxEthDBRecordType typeFilter); +IX_ETH_DB_PUBLIC HashNode* ixEthDBVlanSearch(IxEthDBMacAddr *macAddress, IxEthDBVlanId vlanID, IxEthDBRecordType typeFilter); + +/* Utilities */ +IX_ETH_DB_PUBLIC const char* mac2string(const unsigned char *mac); +IX_ETH_DB_PUBLIC void showHashInfo(void); +IX_ETH_DB_PUBLIC int ixEthDBAnalyzeHash(void); +IX_ETH_DB_PUBLIC const char* errorString(IxEthDBStatus error); +IX_ETH_DB_PUBLIC int numHashElements(void); +IX_ETH_DB_PUBLIC void zapHashtable(void); +IX_ETH_DB_PUBLIC BOOL ixEthDBCheckSingleBitValue(UINT32 value); + +/* Single Eth NPE Check */ +IX_ETH_DB_PUBLIC IxEthDBStatus ixEthDBSingleEthNpeCheck(IxEthDBPortId portId); + +#endif /* IxEthDB_p_H */ + diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h new file mode 100644 index 0000000000..397253a947 --- /dev/null +++ b/drivers/net/npe/include/IxEthMii.h @@ -0,0 +1,270 @@ +/** + * @file IxEthMii.h + * + * @brief this file contains the public API of @ref IxEthMii component + * + * Design notes : + * The main intent of this API is to inplement MII high level fonctionalitoes + * to support the codelets provided with the IXP400 software releases. It + * superceedes previous interfaces provided with @ref IxEThAcc component. + * + * This API has been tested with the PHYs provided with the + * IXP400 development platforms. It may not work for specific Ethernet PHYs + * used on specific boards. + * + * This source code detects and interface the LXT972, LXT973 and KS6995 + * Ethernet PHYs. + * + * This source code should be considered as an example which may need + * to be adapted for different hardware implementations. + * + * It is strongly recommended to use public domain and GPL utilities + * like libmii, mii-diag for MII interface support. + * + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxEthMii_H +#define IxEthMii_H + +#include <IxTypes.h> + +/** + * @defgroup IxEthMii IXP400 Ethernet Phy Access (IxEthMii) API + * + * @brief ethMii is a library that does provides access to the + * Ethernet PHYs + * + *@{ + */ + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount) + * + * @brief Scan the MDIO bus for PHYs + * This function scans PHY addresses 0 through 31, and sets phyPresent[n] to + * TRUE if a phy is discovered at address n. + * + * - Reentrant - no + * - ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyPresent BOOL [in] - boolean array of IXP425_ETH_ACC_MII_MAX_ADDR entries + * @param maxPhyCount UINT32 [in] - number of PHYs to search for (the scan will stop when + * the indicated number of PHYs is found). + * + * @return IX_STATUS + * - IX_ETH_ACC_SUCCESS + * - IX_ETH_ACC_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount); + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiPhyConfig(UINT32 phyAddr, + BOOL speed100, + BOOL fullDuplex, + BOOL autonegotiate) + * + * + * @brief Configure a PHY + * Configure a PHY's speed, duplex and autonegotiation status + * + * - Reentrant - no + * - ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT32 [in] + * @param speed100 BOOL [in] - set to TRUE for 100Mbit/s operation, FALSE for 10Mbit/s + * @param fullDuplex BOOL [in] - set to TRUE for Full Duplex, FALSE for Half Duplex + * @param autonegotiate BOOL [in] - set to TRUE to enable autonegotiation + * + * @return IX_STATUS + * - IX_SUCCESS + * - IX_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IX_STATUS ixEthMiiPhyConfig(UINT32 phyAddr, + BOOL speed100, + BOOL fullDuplex, + BOOL autonegotiate); + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiPhyLoopbackEnable(UINT32 phyAddr) + * + * + * @brief Enable PHY Loopback in a specific Eth MII port + * + * @note When PHY Loopback is enabled, frames sent out to the PHY from the + * IXP400 will be looped back to the IXP400. They will not be transmitted out + * on the wire. + * + * - Reentrant - no + * - ISR Callable - no + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * + * @return IX_STATUS + * - IX_SUCCESS + * - IX_FAIL : invalid arguments. + * <hr> + */ +PUBLIC IX_STATUS +ixEthMiiPhyLoopbackEnable (UINT32 phyAddr); + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiPhyLoopbackDisable(UINT32 phyAddr) + * + * + * @brief Disable PHY Loopback in a specific Eth MII port + * + * - Reentrant - no + * - ISR Callable - no + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * + * @return IX_STATUS + * - IX_SUCCESS + * - IX_FAIL : invalid arguments. + * <hr> + */ +PUBLIC IX_STATUS +ixEthMiiPhyLoopbackDisable (UINT32 phyAddr); + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiPhyReset(UINT32 phyAddr) + * + * @brief Reset a PHY + * Reset a PHY + * + * - Reentrant - no + * - ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * + * @return IX_STATUS + * - IX_SUCCESS + * - IX_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr); + + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiLinkStatus(UINT32 phyAddr, + BOOL *linkUp, + BOOL *speed100, + BOOL *fullDuplex, + BOOL *autoneg) + * + * @brief Retrieve the current status of a PHY + * Retrieve the link, speed, duplex and autonegotiation status of a PHY + * + * - Reentrant - no + * - ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * @param linkUp BOOL [out] - set to TRUE if the link is up + * @param speed100 BOOL [out] - set to TRUE indicates 100Mbit/s, FALSE indicates 10Mbit/s + * @param fullDuplex BOOL [out] - set to TRUE indicates Full Duplex, FALSE indicates Half Duplex + * @param autoneg BOOL [out] - set to TRUE indicates autonegotiation is enabled, FALSE indicates autonegotiation is disabled + * + * @return IX_STATUS + * - IX_SUCCESS + * - IX_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IX_STATUS ixEthMiiLinkStatus(UINT32 phyAddr, + BOOL *linkUp, + BOOL *speed100, + BOOL *fullDuplex, + BOOL *autoneg); + +/** + * @ingroup IxEthMii + * + * @fn ixEthMiiPhyShow (UINT32 phyAddr) + * + * + * @brief Display information on a specified PHY + * Display link status, speed, duplex and Auto Negotiation status + * + * - Reentrant - no + * - ISR Callable - no + * + * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock. + * + * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31) + * + * @return IX_STATUS + * - IX_SUCCESS + * - IX_FAIL : invalid arguments. + * + * <hr> + */ +PUBLIC IX_STATUS ixEthMiiPhyShow (UINT32 phyAddr); + +#endif /* ndef IxEthMii_H */ +/** + *@} + */ diff --git a/drivers/net/npe/include/IxEthMii_p.h b/drivers/net/npe/include/IxEthMii_p.h new file mode 100644 index 0000000000..104b65c1f0 --- /dev/null +++ b/drivers/net/npe/include/IxEthMii_p.h @@ -0,0 +1,185 @@ +/** + * @file IxEthMii_p.h + * + * @author Intel Corporation + * @date + * + * @brief MII Header file + * + * Design Notes: + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxEthMii_p_H +#define IxEthMii_p_H + + +/* MII definitions - these have been verified against the LXT971 and + LXT972 PHYs*/ + +#define IX_ETH_MII_MAX_REG_NUM 0x20 /* max number of registers */ + +#define IX_ETH_MII_CTRL_REG 0x0 /* Control Register */ +#define IX_ETH_MII_STAT_REG 0x1 /* Status Register */ +#define IX_ETH_MII_PHY_ID1_REG 0x2 /* PHY identifier 1 Register */ +#define IX_ETH_MII_PHY_ID2_REG 0x3 /* PHY identifier 2 Register */ +#define IX_ETH_MII_AN_ADS_REG 0x4 /* Auto-Negotiation */ + /* Advertisement Register */ +#define IX_ETH_MII_AN_PRTN_REG 0x5 /* Auto-Negotiation */ + /* partner ability Register */ +#define IX_ETH_MII_AN_EXP_REG 0x6 /* Auto-Negotiation */ + /* Expansion Register */ +#define IX_ETH_MII_AN_NEXT_REG 0x7 /* Auto-Negotiation */ + /* next-page transmit Register */ + +#define IX_ETH_MII_STAT2_REG 0x11 /* Status Register 2*/ + + +/* MII control register bit */ + +#define IX_ETH_MII_CR_COLL_TEST 0x0080 /* collision test */ +#define IX_ETH_MII_CR_FDX 0x0100 /* FDX =1, half duplex =0 */ +#define IX_ETH_MII_CR_RESTART 0x0200 /* restart auto negotiation */ +#define IX_ETH_MII_CR_ISOLATE 0x0400 /* isolate PHY from MII */ +#define IX_ETH_MII_CR_POWER_DOWN 0x0800 /* power down */ +#define IX_ETH_MII_CR_AUTO_EN 0x1000 /* auto-negotiation enable */ +#define IX_ETH_MII_CR_100 0x2000 /* 0 = 10mb, 1 = 100mb */ +#define IX_ETH_MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define IX_ETH_MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define IX_ETH_MII_CR_NORM_EN 0x0000 /* just enable the PHY */ +#define IX_ETH_MII_CR_DEF_0_MASK 0xca7f /* they must return zero */ +#define IX_ETH_MII_CR_RES_MASK 0x007f /* reserved bits, return zero */ + +/* MII Status register bit definitions */ + +#define IX_ETH_MII_SR_LINK_STATUS 0x0004 /* link Status -- 1 = link */ +#define IX_ETH_MII_SR_AUTO_SEL 0x0008 /* auto speed select capable */ +#define IX_ETH_MII_SR_REMOTE_FAULT 0x0010 /* Remote fault detect */ +#define IX_ETH_MII_SR_AUTO_NEG 0x0020 /* auto negotiation complete */ +#define IX_ETH_MII_SR_10T_HALF_DPX 0x0800 /* 10BaseT HD capable */ +#define IX_ETH_MII_SR_10T_FULL_DPX 0x1000 /* 10BaseT FD capable */ +#define IX_ETH_MII_SR_TX_HALF_DPX 0x2000 /* TX HD capable */ +#define IX_ETH_MII_SR_TX_FULL_DPX 0x4000 /* TX FD capable */ +#define IX_ETH_MII_SR_T4 0x8000 /* T4 capable */ +#define IX_ETH_MII_SR_ABIL_MASK 0xff80 /* abilities mask */ +#define IX_ETH_MII_SR_EXT_CAP 0x0001 /* extended capabilities */ + + +/* LXT971/2 Status 2 register bit definitions */ +#define IX_ETH_MII_SR2_100 0x4000 +#define IX_ETH_MII_SR2_TX 0x2000 +#define IX_ETH_MII_SR2_RX 0x1000 +#define IX_ETH_MII_SR2_COL 0x0800 +#define IX_ETH_MII_SR2_LINK 0x0400 +#define IX_ETH_MII_SR2_FD 0x0200 +#define IX_ETH_MII_SR2_AUTO 0x0100 +#define IX_ETH_MII_SR2_AUTO_CMPLT 0x0080 +#define IX_ETH_MII_SR2_POLARITY 0x0020 +#define IX_ETH_MII_SR2_PAUSE 0x0010 +#define IX_ETH_MII_SR2_ERROR 0x0008 + +/* MII Link Code word bit definitions */ + +#define IX_ETH_MII_BP_FAULT 0x2000 /* remote fault */ +#define IX_ETH_MII_BP_ACK 0x4000 /* acknowledge */ +#define IX_ETH_MII_BP_NP 0x8000 /* nexp page is supported */ + +/* MII Next Page bit definitions */ + +#define IX_ETH_MII_NP_TOGGLE 0x0800 /* toggle bit */ +#define IX_ETH_MII_NP_ACK2 0x1000 /* acknowledge two */ +#define IX_ETH_MII_NP_MSG 0x2000 /* message page */ +#define IX_ETH_MII_NP_ACK1 0x4000 /* acknowledge one */ +#define IX_ETH_MII_NP_NP 0x8000 /* nexp page will follow */ + +/* MII Expansion Register bit definitions */ + +#define IX_ETH_MII_EXP_FAULT 0x0010 /* parallel detection fault */ +#define IX_ETH_MII_EXP_PRTN_NP 0x0008 /* link partner next-page able */ +#define IX_ETH_MII_EXP_LOC_NP 0x0004 /* local PHY next-page able */ +#define IX_ETH_MII_EXP_PR 0x0002 /* full page received */ +#define IX_ETH_MII_EXP_PRT_AN 0x0001 /* link partner auto neg able */ + +/* technology ability field bit definitions */ + +#define IX_ETH_MII_TECH_10BASE_T 0x0020 /* 10Base-T */ +#define IX_ETH_MII_TECH_10BASE_FD 0x0040 /* 10Base-T Full Duplex */ +#define IX_ETH_MII_TECH_100BASE_TX 0x0080 /* 100Base-TX */ +#define IX_ETH_MII_TECH_100BASE_TX_FD 0x0100 /* 100Base-TX Full Duplex */ + +#define IX_ETH_MII_TECH_100BASE_T4 0x0200 /* 100Base-T4 */ +#define IX_ETH_MII_ADS_TECH_MASK 0x1fe0 /* technology abilities mask */ +#define IX_ETH_MII_TECH_MASK IX_ETH_MII_ADS_TECH_MASK +#define IX_ETH_MII_ADS_SEL_MASK 0x001f /* selector field mask */ + +#define IX_ETH_MII_AN_FAIL 0x10 /* auto-negotiation fail */ +#define IX_ETH_MII_STAT_FAIL 0x20 /* errors in the status register */ +#define IX_ETH_MII_PHY_NO_ABLE 0x40 /* the PHY lacks some abilities */ + +/* Definitions for MII access routines*/ + +#define IX_ETH_MII_GO BIT(31) +#define IX_ETH_MII_WRITE BIT(26) +#define IX_ETH_MII_TIMEOUT_10TH_SECS (5) +#define IX_ETH_MII_10TH_SEC_IN_MILLIS (100) +#define IX_ETH_MII_READ_FAIL BIT(31) + +/* When we reset the PHY we delay for 2 seconds to allow the reset to + complete*/ +#define IX_ETH_MII_RESET_DELAY_MS (2000) +#define IX_ETH_MII_RESET_POLL_MS (50) + +#define IX_ETH_MII_REG_SHL 16 +#define IX_ETH_MII_ADDR_SHL 21 + +/* supported PHYs */ +#define IX_ETH_MII_LXT971_PHY_ID 0x001378E0 +#define IX_ETH_MII_LXT972_PHY_ID 0x001378E2 +#define IX_ETH_MII_LXT973_PHY_ID 0x00137A10 +#define IX_ETH_MII_LXT973A3_PHY_ID 0x00137A11 +#define IX_ETH_MII_KS8995_PHY_ID 0x00221450 +#define IX_ETH_MII_LXT9785_PHY_ID 0x001378FF + + +#define IX_ETH_MII_INVALID_PHY_ID 0x00000000 +#define IX_ETH_MII_UNKNOWN_PHY_ID 0xffffffff + +#endif /*IxEthAccMii_p_H*/ diff --git a/drivers/net/npe/include/IxEthNpe.h b/drivers/net/npe/include/IxEthNpe.h new file mode 100644 index 0000000000..21bdedc5a7 --- /dev/null +++ b/drivers/net/npe/include/IxEthNpe.h @@ -0,0 +1,695 @@ +#ifndef __doxygen_HIDE /* This file is not part of the API */ + +/** + * @file IxEthNpe.h + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxEthNpe IXP400 Ethernet NPE (IxEthNpe) API + * + * @brief Contains the API for Ethernet NPE. + * + * All messages given to NPE, get back an acknowledgment. The acknowledgment + * is identical to the message sent to the NPE (except for NPE_GETSTATUS message). + * + * @{ + */ + + +/*-------------------------------------------------------------------------- + * APB Message IDs - XScale->NPE + *------------------------------------------------------------------------*/ + +/** + * @def IX_ETHNPE_NPE_GETSTATUS + * + * @brief Request from the XScale client for the NPE to return the firmware + * version of the currently executing image. + * + * Acknowledgment message id is same as the request message id. + * NPE returns the firmware version ID to XScale. + */ +#define IX_ETHNPE_NPE_GETSTATUS 0x00 + +/** + * @def IX_ETHNPE_EDB_SETPORTADDRESS + * + * @brief Request from the XScale client for the NPE to set the Ethernet + * port's port ID and MAC address. + */ +#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01 + +/** + * @def IX_ETHNPE_EDB_GETMACADDRESSDATABASE + * + * @brief Request from XScale client to the NPE requesting upload of + * Ethernet Filtering Database or Header Conversion Database from NPE's + * data memory to XScale accessible SDRAM. + */ +#define IX_ETHNPE_EDB_GETMACADDRESSDATABASE 0x02 + +/** + * @def IX_ETHNPE_EDB_SETMACADDRESSSDATABASE + * + * @brief Request from XScale client to the NPE requesting download of + * Ethernet Filtering Database or Header Conversion Database from SDRAM + * to the NPE's datamemory. + */ +#define IX_ETHNPE_EDB_SETMACADDRESSSDATABASE 0x03 + +/** + * @def IX_ETHNPE_GETSTATS + * + * @brief Request from the XScale client for the current MAC port statistics + * data to be written to the (empty) statistics structure and the specified + * location in externa memory. + */ +#define IX_ETHNPE_GETSTATS 0x04 + +/** + * @def IX_ETHNPE_RESETSTATS + * + * @brief Request from the XScale client to the NPE to reset all of its internal + * MAC port statistics state variables. + * + * As a side effect, this message entails an implicit request that the NPE + * write the current MAC port statistics into the MAC statistics structure + * at the specified location in external memory. + */ +#define IX_ETHNPE_RESETSTATS 0x05 + +/** + * @def IX_ETHNPE_SETMAXFRAMELENGTHS + * + * @brief Request from the XScale client to the NPE to configure maximum framelengths + * and block sizes in receive and transmit direction. + */ +#define IX_ETHNPE_SETMAXFRAMELENGTHS 0x06 + +/** + * @def IX_ETHNPE_VLAN_SETRXTAGMODE + * + * @brief Request from the XScale client to the NPE to configure VLAN frame type + * filtering and VLAN the tagging mode for the receiver. + */ +#define IX_ETHNPE_VLAN_SETRXTAGMODE 0x07 + +/** + * @def IX_ETHNPE_VLAN_SETDEFAULTRXVID + * + * @brief Request from the XScale client to the NPE to set receiver's default + * VLAN tag (PVID)and internal traffic class. + */ +#define IX_ETHNPE_VLAN_SETDEFAULTRXVID 0x08 + +/** + * @def IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY + * + * @brief Request from the XScale client to the NPE to configure VLAN Port + * membership and Tx tagging for 8 consecutive VLANID's. + */ +#define IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY 0x09 + +/** + * @def IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE + * + * @brief Request from the XScale client to the NPE to configure VLAN Port + * membership and Tx tagging for a range of VLANID's. + */ +#define IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE 0x0A + +/** + * @def IX_ETHNPE_VLAN_SETRXQOSENTRY + * + * @brief Request from the XScale client to the NPE to map a user priority + * to QoS class and an AQM queue number. + */ +#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B + +/** + * @def IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE + * + * @brief Request from the XScale client to the NPE to enable or disable + * portID extraction from VLAN-tagged frames for the specified port. + */ +#define IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C + +/** + * @def IX_ETHNPE_STP_SETBLOCKINGSTATE + * + * @brief Request from the XScale client to the NPE to block or unblock + * forwarding for spanning tree BPDUs. + */ +#define IX_ETHNPE_STP_SETBLOCKINGSTATE 0x0D + +/** + * @def IX_ETHNPE_FW_SETFIREWALLMODE + * + * @brief Request from the XScale client to the NPE to configure firewall + * services modes of operation and/or download Ethernet Firewall Database from + * SDRAM to NPE. + */ +#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E + +/** + * @def IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID + * + * @brief Request from the XScale client to the NPE to set global frame control + * and duration/ID field for the 802.3 to 802.11 protocol header conversion + * service. + */ +#define IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID 0x0F + +/** + * @def IX_ETHNPE_PC_SETBBSID + * + * @brief Request from the XScale client to the NPE to set global BBSID field + * value for the 802.3 to 802.11 protocol header conversion service. + */ +#define IX_ETHNPE_PC_SETBBSID 0x10 + +/** + * @def IX_ETHNPE_PC_SETAPMACTABLE + * + * @brief Request from the XScale client to the NPE to update a block/section/ + * range of the AP MAC Address Table. + */ +#define IX_ETHNPE_PC_SETAPMACTABLE 0x11 + +/** + * @def IX_ETHNPE_SETLOOPBACK_MODE + * + * @brief Turn on or off the NPE frame loopback. + */ +#define IX_ETHNPE_SETLOOPBACK_MODE (0x12) + +/*-------------------------------------------------------------------------- + * APB Message IDs - NPE->XScale + *------------------------------------------------------------------------*/ + +/** + * @def IX_ETHNPE_NPE_GETSTATUS_ACK + * + * @brief Acknowledgment to IX_ETHNPE_NPE_GETSTATUS message. NPE firmware version + * id is returned in the message. + */ +#define IX_ETHNPE_NPE_GETSTATUS_ACK 0x00 + +/** + * @def IX_ETHNPE_EDB_SETPORTADDRESS_ACK + * + * @brief Acknowledgment to IX_ETHNPE_EDB_SETPORTADDRESS message. + */ +#define IX_ETHNPE_EDB_SETPORTADDRESS_ACK 0x01 + +/** + * @def IX_ETHNPE_EDB_GETMACADDRESSDATABASE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_EDB_GETMACADDRESSDATABASE message + */ +#define IX_ETHNPE_EDB_GETMACADDRESSDATABASE_ACK 0x02 + +/** + * @def IX_ETHNPE_EDB_SETMACADDRESSSDATABASE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_EDB_SETMACADDRESSSDATABASE message. + */ +#define IX_ETHNPE_EDB_SETMACADDRESSSDATABASE_ACK 0x03 + +/** + * @def IX_ETHNPE_GETSTATS_ACK + * + * @brief Acknowledgment to IX_ETHNPE_GETSTATS message. + */ +#define IX_ETHNPE_GETSTATS_ACK 0x04 + +/** + * @def IX_ETHNPE_RESETSTATS_ACK + * + * @brief Acknowledgment to IX_ETHNPE_RESETSTATS message. + */ +#define IX_ETHNPE_RESETSTATS_ACK 0x05 + +/** + * @def IX_ETHNPE_SETMAXFRAMELENGTHS_ACK + * + * @brief Acknowledgment to IX_ETHNPE_SETMAXFRAMELENGTHS message. + */ +#define IX_ETHNPE_SETMAXFRAMELENGTHS_ACK 0x06 + +/** + * @def IX_ETHNPE_VLAN_SETRXTAGMODE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_VLAN_SETRXTAGMODE message. + */ +#define IX_ETHNPE_VLAN_SETRXTAGMODE_ACK 0x07 + +/** + * @def IX_ETHNPE_VLAN_SETDEFAULTRXVID_ACK + * + * @brief Acknowledgment to IX_ETHNPE_VLAN_SETDEFAULTRXVID message. + */ +#define IX_ETHNPE_VLAN_SETDEFAULTRXVID_ACK 0x08 + +/** + * @def IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY_ACK + * + * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY message. + */ +#define IX_ETHNPE_VLAN_SETPORTVLANTABLEENTRY_ACK 0x09 + +/** + * @def IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE message. + */ +#define IX_ETHNPE_VLAN_SETPORTVLANTABLERANGE_ACK 0x0A + +/** + * @def IX_ETHNPE_VLAN_SETRXQOSENTRY_ACK + * + * @brief Acknowledgment to IX_ETHNPE_VLAN_SETRXQOSENTRY message. + */ +#define IX_ETHNPE_VLAN_SETRXQOSENTRY_ACK 0x0B + +/** + * @def IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE message. + */ +#define IX_ETHNPE_VLAN_SETPORTIDEXTRACTIONMODE_ACK 0x0C + +/** + * @def IX_ETHNPE_STP_SETBLOCKINGSTATE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_STP_SETBLOCKINGSTATE message. + */ +#define IX_ETHNPE_STP_SETBLOCKINGSTATE_ACK 0x0D + +/** + * @def IX_ETHNPE_FW_SETFIREWALLMODE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_FW_SETFIREWALLMODE message. + */ +#define IX_ETHNPE_FW_SETFIREWALLMODE_ACK 0x0E + +/** + * @def IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID_ACK + * + * @brief Acknowledgment to IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID message. + */ +#define IX_ETHNPE_PC_SETFRAMECONTROLDURATIONID_ACK 0x0F + +/** + * @def IX_ETHNPE_PC_SETBBSID_ACK + * + * @brief Acknowledgment to IX_ETHNPE_PC_SETBBSID message. + */ +#define IX_ETHNPE_PC_SETBBSID_ACK 0x10 + +/** + * @def IX_ETHNPE_PC_SETAPMACTABLE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_PC_SETAPMACTABLE message. + */ +#define IX_ETHNPE_PC_SETAPMACTABLE_ACK 0x11 + +/** + * @def IX_ETHNPE_SETLOOPBACK_MODE_ACK + * + * @brief Acknowledgment to IX_ETHNPE_SETLOOPBACK_MODE message. + */ +#define IX_ETHNPE_SETLOOPBACK_MODE_ACK (0x12) + +/*-------------------------------------------------------------------------- + * Queue Manager Queue entry bit field boundary definitions + *------------------------------------------------------------------------*/ + +/** + * @def MASK(hi,lo) + * + * @brief Macro for mask + */ +#define MASK(hi,lo) (((1 << (1 + ((hi) - (lo)))) - 1) << (lo)) + +/** + * @def BITS(x,hi,lo) + * + * @brief Macro for bits + */ +#define BITS(x,hi,lo) (((x) & MASK(hi,lo)) >> (lo)) + +/** + * @def IX_ETHNPE_QM_Q_RXENET_LENGTH_MASK + * + * @brief QMgr Queue LENGTH field mask + */ +#define IX_ETHNPE_QM_Q_RXENET_LENGTH_MASK 0x3fff + +/** + * @def IX_ETHNPE_QM_Q_FIELD_FLAG_R + * + * @brief QMgr Queue FLAG field right boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_FLAG_R 20 + +/** + * @def IX_ETHNPE_QM_Q_FIELD_FLAG_MASK + * + * @brief QMgr Queue FLAG field mask + * + * Multicast bit : BIT(4) + * Broadcast bit : BIT(5) + * IP bit : BIT(6) (linux only) + * + */ +#ifdef __vxworks +#define IX_ETHNPE_QM_Q_FIELD_FLAG_MASK 0x30 +#else +#define IX_ETHNPE_QM_Q_FIELD_FLAG_MASK 0x70 +#endif + + +/** + * @def IX_ETHNPE_QM_Q_FIELD_NPEID_L + * + * @brief QMgr Queue NPE ID field left boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_NPEID_L 1 + +/** + * @def IX_ETHNPE_QM_Q_FIELD_NPEID_R + * + * @brief QMgr Queue NPE ID field right boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_NPEID_R 0 + +/** + * @def IX_ETHNPE_QM_Q_FIELD_PRIOR_L + * + * @brief QMgr Queue Priority field left boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_PRIOR_L 2 + +/** + * @def IX_ETHNPE_QM_Q_FIELD_PRIOR_R + * + * @brief QMgr Queue Priority field right boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_PRIOR_R 0 + +/** + * @def IX_ETHNPE_QM_Q_FIELD_ADDR_L + * + * @brief QMgr Queue Address field left boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_ADDR_L 31 + +/** + * @def IX_ETHNPE_QM_Q_FIELD_ADDR_R + * + * @brief QMgr Queue Address field right boundary + */ +#define IX_ETHNPE_QM_Q_FIELD_ADDR_R 5 + +/*-------------------------------------------------------------------------- + * Queue Manager Queue entry bit field masks + *------------------------------------------------------------------------*/ + +/** + * @def IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK + * + * @brief Macro to mask the Address field of the FreeEnet Queue Manager Entry + */ +#define IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ + IX_ETHNPE_QM_Q_FIELD_ADDR_R) + +/** + * @def IX_ETHNPE_QM_Q_RXENET_NPEID_MASK + * + * @brief Macro to mask the NPE ID field of the RxEnet Queue Manager Entry + */ +#define IX_ETHNPE_QM_Q_RXENET_NPEID_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ + IX_ETHNPE_QM_Q_FIELD_NPEID_R) + +/** + * @def IX_ETHNPE_QM_Q_RXENET_ADDR_MASK + * + * @brief Macro to mask the Mbuf Address field of the RxEnet Queue Manager Entry + */ +#define IX_ETHNPE_QM_Q_RXENET_ADDR_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ + IX_ETHNPE_QM_Q_FIELD_ADDR_R) + +/** + * @def IX_ETHNPE_QM_Q_TXENET_PRIOR_MASK + * + * @brief Macro to mask the Priority field of the TxEnet Queue Manager Entry + */ +#define IX_ETHNPE_QM_Q_TXENET_PRIOR_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_PRIOR_L, \ + IX_ETHNPE_QM_Q_FIELD_PRIOR_R) + +/** + * @def IX_ETHNPE_QM_Q_TXENET_ADDR_MASK + * + * @brief Macro to mask the Mbuf Address field of the TxEnet Queue Manager Entry + */ +#define IX_ETHNPE_QM_Q_TXENET_ADDR_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ + IX_ETHNPE_QM_Q_FIELD_ADDR_R) + +/** + * @def IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK + * + * @brief Macro to mask the NPE ID field of the TxEnetDone Queue Manager Entry + */ +#define IX_ETHNPE_QM_Q_TXENETDONE_NPEID_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ + IX_ETHNPE_QM_Q_FIELD_NPEID_R) + +/** + * @def IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK + * + * @brief Macro to mask the Mbuf Address field of the TxEnetDone Queue Manager + * Entry + */ +#define IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK \ + MASK (IX_ETHNPE_QM_Q_FIELD_ADDR_L, \ + IX_ETHNPE_QM_Q_FIELD_ADDR_R) + +/*-------------------------------------------------------------------------- + * Queue Manager Queue entry bit field value extraction macros + *------------------------------------------------------------------------*/ + +/** + * @def IX_ETHNPE_QM_Q_FREEENET_ADDR_VAL(x) + * + * @brief Extraction macro for Address field of FreeNet Queue Manager Entry + * + * Pointer to an mbuf buffer descriptor + */ +#define IX_ETHNPE_QM_Q_FREEENET_ADDR_VAL(x) \ + ((x) & IX_ETHNPE_QM_Q_FREEENET_ADDR_MASK) + +/** + * @def IX_ETHNPE_QM_Q_RXENET_NPEID_VAL(x) + * + * @brief Extraction macro for NPE ID field of RxEnet Queue Manager Entry + * + * Set to 0 for entries originating from the Eth0 NPE; + * Set to 1 for entries originating from the Eth1 NPE. + */ +#define IX_ETHNPE_QM_Q_RXENET_NPEID_VAL(x) \ + BITS (x, IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ + IX_ETHNPE_QM_Q_FIELD_NPEID_R) + +/** + * @def IX_ETHNPE_QM_Q_RXENET_PORTID_VAL(x) + * + * @brief Extraction macro for Port ID field of RxEnet Queue Manager Entry + * + * 0-5: Assignable (by the XScale client) to any of the physical ports. + * 6: It is reserved + * 7: Indication that the NPE did not find the associated frame's destination MAC address within + * its internal filtering database. + */ +#define IX_ETHNPE_QM_Q_RXENET_PORTID_VAL(x) \ + BITS (x, IX_ETHNPE_QM_Q_FIELD_PORTID_L, \ + IX_ETHNPE_QM_Q_Field_PortID_R) + +/** + * @def IX_ETHNPE_QM_Q_RXENET_ADDR_VAL(x) + * + * @brief Extraction macro for Address field of RxEnet Queue Manager Entry + * + * Pointer to an mbuf buffer descriptor + */ +#define IX_ETHNPE_QM_Q_RXENET_ADDR_VAL(x) \ + ((x) & IX_ETHNPE_QM_Q_RXENET_ADDR_MASK) + +/** + * @def IX_ETHNPE_QM_Q_TXENET_PRIOR_VAL(x) + * + * @brief Extraction macro for Priority field of TxEnet Queue Manager Entry + * + * Priority of the packet (as described in IEEE 802.1D). This field is + * cleared upon return from the Ethernet NPE to the TxEnetDone queue. + */ +#define IX_ETHNPE_QM_Q_TXENET_PRIOR_VAL(x) \ + BITS (x, IX_ETHNPE_QM_Q_FIELD_PRIOR_L, \ + IX_ETHNPE_QM_Q_FIELD_PRIOR_R) + +/** + * @def IX_ETHNPE_QM_Q_TXENET_ADDR_VAL(x) + * + * @brief Extraction macro for Address field of Queue Manager TxEnet Queue + * Manager Entry + * + * Pointer to an mbuf buffer descriptor + */ +#define IX_ETHNPE_QM_Q_TXENET_ADDR_VAL(x) \ + ((x) & IX_ETHNPE_QM_Q_TXENET_ADDR_MASK) + +/** + * @def IX_ETHNPE_QM_Q_TXENETDONE_NPEID_VAL(x) + * + * @brief Extraction macro for NPE ID field of TxEnetDone Queue Manager Entry + * + * Set to 0 for entries originating from the Eth0 NPE; set to 1 for en-tries + * originating from the Eth1 NPE. + */ +#define IX_ETHNPE_QM_Q_TXENETDONE_NPEID_VAL(x) \ + BITS (x, IX_ETHNPE_QM_Q_FIELD_NPEID_L, \ + IX_ETHNPE_QM_Q_FIELD_NPEID_R) + +/** + * @def IX_ETHNPE_QM_Q_TXENETDONE_ADDR_VAL(x) + * + * @brief Extraction macro for Address field of TxEnetDone Queue Manager Entry + * + * Pointer to an mbuf buffer descriptor + */ +#define IX_ETHNPE_QM_Q_TXENETDONE_ADDR_VAL(x) \ + ((x) & IX_ETHNPE_QM_Q_TXENETDONE_ADDR_MASK) + + +/*-------------------------------------------------------------------------- + * NPE limits + *------------------------------------------------------------------------*/ + +/** + * @def IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN + * + * @brief Macro to check the minimum length of a rx free buffer + */ +#define IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MIN (64) + +/** + * @def IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK + * + * @brief Mask to apply to the mbuf length before submitting it to the NPE + * (the NPE handles only rx free mbufs which are multiple of 64) + * + * @sa IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK + */ +#define IX_ETHNPE_ACC_RXFREE_BUFFER_LENGTH_MASK (~63) + +/** + * @def IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_UP(size) + * + * @brief Round up to get the size necessary to receive without chaining + * the frames which are (size) bytes (the NPE operates by multiple of 64) + * e.g. To receive 1514 bytes frames, the size of the buffers in replenish + * has to be at least (1514+63)&(~63) = 1536 bytes. + * + */ +#define IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_UP(size) (((size) + 63) & ~63) + +/** + * @def IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_DOWN(size) + * + * @brief Round down to apply to the mbuf length before submitting + * it to the NPE. (the NPE operates by multiple of 64) + * + */ +#define IX_ETHNPE_ACC_RXFREE_BUFFER_ROUND_DOWN(size) ((size) & ~63) + +/** + * @def IX_ETHNPE_ACC_FRAME_LENGTH_MAX + * + * @brief maximum mbuf length supported by the NPE + * + * @sa IX_ETHNPE_ACC_FRAME_LENGTH_MAX + */ +#define IX_ETHNPE_ACC_FRAME_LENGTH_MAX (16320) + +/** + * @def IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT + * + * @brief default mbuf length supported by the NPE + * + * @sa IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT + */ +#define IX_ETHNPE_ACC_FRAME_LENGTH_DEFAULT (1522) + +/** + * @def IX_ETHNPE_ACC_LENGTH_OFFSET + * + * @brief Offset of the cluster length field in the word shared with the NPEs + */ +#define IX_ETHNPE_ACC_LENGTH_OFFSET 16 + +/** + * @def IX_ETHNPE_ACC_PKTLENGTH_MASK + * + * @brief Mask of the cluster length field in the word shared with the NPEs + */ +#define IX_ETHNPE_ACC_PKTLENGTH_MASK 0x3fff + + +/** + *@} + */ + +#endif /* __doxygen_HIDE */ diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h new file mode 100644 index 0000000000..dabc38e25e --- /dev/null +++ b/drivers/net/npe/include/IxFeatureCtrl.h @@ -0,0 +1,742 @@ +/** + * @file IxFeatureCtrl.h + * + * @date 30-Jan-2003 + + * @brief This file contains the public API of the IXP400 Feature Control + * component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ +/* ------------------------------------------------------ + Doxygen group definitions + ------------------------------------------------------ */ +/** + * @defgroup IxFeatureCtrlAPI IXP400 Feature Control (IxFeatureCtrl) API + * + * @brief The Public API for the IXP400 Feature Control. + * + * @{ + */ + +#ifndef IXFEATURECTRL_H +#define IXFEATURECTRL_H + +/* + * User defined include files + */ +#include "IxOsal.h" + +/* + * #defines and macros + */ + +/************************************************************* + * The following are IxFeatureCtrlComponentCheck return values. + ************************************************************/ + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_COMPONENT_DISABLED + * + * @brief Hardware Component is disabled/unavailable. + * Return status by ixFeatureCtrlComponentCheck() + */ +#define IX_FEATURE_CTRL_COMPONENT_DISABLED 0 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_COMPONENT_ENABLED + * + * @brief Hardware Component is available. + * Return status by ixFeatureCtrlComponentCheck() + */ +#define IX_FEATURE_CTRL_COMPONENT_ENABLED 1 + +/*********************************************************************************** + * Product ID in XScale CP15 - Register 0 + * - It contains information on the maximum XScale Core Frequency and + * Silicon Stepping. + * - XScale Core Frequency Id indicates only the maximum XScale frequency + * achievable and not the running XScale frequency (maybe stepped down). + * - The register is read by using ixFeatureCtrlProductIdRead. + * - Usage example: + * productId = ixFeatureCtrlProductIdRead(); + * if( (productId & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) == + * IX_FEATURE_CTRL_SILICON_TYPE_A0 ) + * if( (productId & IX_FEATURE_CTRL_XSCALE_FREQ_MASK) == + * IX_FEATURE_CTRL_XSCALE_FREQ_533 ) + * + * 31 28 27 24 23 20 19 16 15 12 11 9 8 4 3 0 + * -------------------------------------------------------------------------------- + * | 0x6 | 0x9 | 0x0 | 0x5 | 0x4 | Device ID | XScale Core Freq Id | Si Stepping Id | + * -------------------------------------------------------------------------------- + * + * Maximum Achievable XScale Core Frequency Id : 533MHz - 0x1C + * 400MHz - 0x1D + * 266MHz - 0x1F + * + * <b>THE CORE FREQUENCY ID IS NOT APPLICABLE TO IXP46X <\b> + * + * The above is applicable to IXP42X only. CP15 in IXP46X does not contain any + * Frequency ID. + * + * Si Stepping Id : A - 0x0 + * B - 0x1 + * + * XScale Core freq Id - Device ID [11:9] : IXP42X - 0x0 + * IXP46X - 0x1 + *************************************************************************************/ + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_SILICON_TYPE_A0 + * + * @brief This is the value of A0 Silicon in product ID. + */ +#define IX_FEATURE_CTRL_SILICON_TYPE_A0 0 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_SILICON_TYPE_B0 + * + * @brief This is the value of B0 Silicon in product ID. + */ +#define IX_FEATURE_CTRL_SILICON_TYPE_B0 1 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_SILICON_STEPPING_MASK + * + * @brief This is the mask of silicon stepping in product ID. + */ +#define IX_FEATURE_CTRL_SILICON_STEPPING_MASK 0xF + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_DEVICE_TYPE_MASK + * + * @brief This is the mask of silicon stepping in product ID. + */ +#define IX_FEATURE_CTRL_DEVICE_TYPE_MASK (0x7) + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET + * + * @brief This is the mask of silicon stepping in product ID. + */ +#define IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET 9 + + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_XSCALE_FREQ_533 + * + * @brief This is the value of 533MHz XScale Core in product ID. + */ +#define IX_FEATURE_CTRL_XSCALE_FREQ_533 ((0x1C)<<4) + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_XSCALE_FREQ_400 + * + * @brief This is the value of 400MHz XScale Core in product ID. + */ +#define IX_FEATURE_CTRL_XSCALE_FREQ_400 ((0x1D)<<4) + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_XSCALE_FREQ_266 + * + * @brief This is the value of 266MHz XScale Core in product ID. + */ +#define IX_FEATURE_CTRL_XSCALE_FREQ_266 ((0x1F)<<4) + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURE_CTRL_XSCALE_FREQ_MASK + * + * @brief This is the mask of XScale Core in product ID. + */ +#define IX_FEATURE_CTRL_XSCALE_FREQ_MASK ((0xFF)<<4) + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_UTOPIA_32PHY + * + * @brief Maximum UTOPIA PHY available is 32. + * + */ +#define IX_FEATURECTRL_REG_UTOPIA_32PHY 0x0 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_UTOPIA_16PHY + * + * @brief Maximum UTOPIA PHY available is 16. + * + */ +#define IX_FEATURECTRL_REG_UTOPIA_16PHY 0x1 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_UTOPIA_8PHY + * + * @brief Maximum UTOPIA PHY available to is 8. + * + */ +#define IX_FEATURECTRL_REG_UTOPIA_8PHY 0x2 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_UTOPIA_4PHY + * + * @brief Maximum UTOPIA PHY available to is 4. + * + */ +#define IX_FEATURECTRL_REG_UTOPIA_4PHY 0x3 + +#ifdef __ixp46X + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_XSCALE_533FREQ + * + * @brief Maximum frequency available to IXP46x is 533 MHz. + * + */ +#define IX_FEATURECTRL_REG_XSCALE_533FREQ 0x0 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_XSCALE_667FREQ + * + * @brief Maximum frequency available to IXP46x is 667 MHz. + * + */ +#define IX_FEATURECTRL_REG_XSCALE_667FREQ 0x1 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_XSCALE_400FREQ + * + * @brief Maximum frequency available to IXP46x is 400 MHz. + * + */ +#define IX_FEATURECTRL_REG_XSCALE_400FREQ 0x2 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_REG_XSCALE_266FREQ + * + * @brief Maximum frequency available to IXP46x is 266 MHz. + * + */ +#define IX_FEATURECTRL_REG_XSCALE_266FREQ 0x3 + +#endif /* __ixp46X */ + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE + * + * @brief Component selected is not available for device + * + */ +#define IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE 0x0000 + +/** + * @ingroup IxFeatureCtrlAPI + * + * @def IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE + * + * @brief Component selected is not available for device + * + */ +#define IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE 0xffff + +/** + * @defgroup IxFeatureCtrlSwConfig Software Configuration for Access Component + * + * @ingroup IxFeatureCtrlAPI + * + * @brief This section describes software configuration in access component. The + * configuration can be changed at run-time. ixFeatureCtrlSwConfigurationCheck( ) + * will be used across applicable access component to check the configuration. + * ixFeatureCtrlSwConfigurationWrite( ) is used to write the software configuration. + * + * @note <b>All software configurations are default to be enabled.</b> + * + * @{ + */ +/** + * @ingroup IxFeatureCtrlSwConfig + * + * @def IX_FEATURE_CTRL_SWCONFIG_DISABLED + * + * @brief Software configuration is disabled. + * + */ +#define IX_FEATURE_CTRL_SWCONFIG_DISABLED 0 + +/** + * @ingroup IxFeatureCtrlSwConfig + * + * @def IX_FEATURE_CTRL_SWCONFIG_ENABLED + * + * @brief Software configuration is enabled. + * + */ +#define IX_FEATURE_CTRL_SWCONFIG_ENABLED 1 + +/** + * Section for enums + **/ + +/** + * @ingroup IxFeatureCtrlBuildDevice + * + * @enum IxFeatureCtrlBuildDevice + * + * @brief Indicates software build type. + * + * Default build type is IXP42X + * + */ +typedef enum +{ + IX_FEATURE_CTRL_SW_BUILD_IXP42X = 0, /**<Build type is IXP42X */ + IX_FEATURE_CTRL_SW_BUILD_IXP46X /**<Build type is IXP46X */ +} IxFeatureCtrlBuildDevice; + +/** + * @ingroup IxFeatureCtrlSwConfig + * + * @enum IxFeatureCtrlSwConfig + * + * @brief Enumeration for software configuration in access components. + * + * Entry for new run-time software configuration should be added here. + */ +typedef enum +{ + IX_FEATURECTRL_ETH_LEARNING = 0, /**< EthDB Learning Feature */ + IX_FEATURECTRL_ORIGB0_DISPATCHER, /**< IXP42X B0 and IXP46X dispatcher without + livelock prevention functionality Feature */ + IX_FEATURECTRL_SWCONFIG_MAX /**< Maximum boudary for IxFeatureCtrlSwConfig */ +} IxFeatureCtrlSwConfig; + + +/************************************************************************ + * IXP400 Feature Control Register + * - It contains the information (available/unavailable) of IXP425&IXP46X + * hardware components in their corresponding bit location. + * - Bit value of 0 means the hardware component is available + * or not software disabled. Hardware component that is available + * can be software disabled. + * - Bit value of 1 means the hardware is unavailable or software + * disabled.Hardware component that is unavailable cannot be software + * enabled. + * - Use ixFeatureCtrlHwCapabilityRead() to read the hardware component's + * availability. + * - Use ixFeatureCtrlRead() to get the current IXP425/IXP46X feature control + * register value. + * + * Bit Field Description (Hardware Component Availability) + * --- --------------------------------------------------- + * 0 RComp Circuitry + * 1 USB Controller + * 2 Hashing Coprocessor + * 3 AES Coprocessor + * 4 DES Coprocessor + * 5 HDLC Coprocessor + * 6 AAL Coprocessor - Always available in IXP46X + * 7 HSS Coprocesspr + * 8 Utopia Coprocessor + * 9 Ethernet 0 Coprocessor + * 10 Ethernet 1 Coprocessor + * 11 NPE A + * 12 NPE B + * 13 NPE C + * 14 PCI Controller + * 15 ECC/TimeSync Coprocessor - Only applicable to IXP46X + * 16-17 Utopia PHY Limit Status : 0x0 - 32 PHY + * 0x1 - 16 PHY + * 0x2 - 8 PHY + * 0x3 - 4 PHY + * + * Portions below are only applicable to IXP46X + * 18 USB Host Coprocessor + * 19 NPE A Ethernet - 0 for Enable if Utopia = 1 + * 20 NPE B Ethernet coprocessor 1-3. + * 21 RSA Crypto Block coprocessor. + * 22-23 Processor frequency : 0x0 - 533 MHz + * 0x1 - 667 MHz + * 0x2 - 400 MHz + * 0x3 - 266 MHz + * 24-31 Reserved + * + ************************************************************************/ +/*Section generic to both IXP42X and IXP46X*/ + +/** + * @ingroup IxFeatureCtrlAPI + * + * @enum IxFeatureCtrlComponentType + * + * @brief Enumeration for components availavble + * + */ +typedef enum +{ + IX_FEATURECTRL_RCOMP = 0, /**<bit location for RComp Circuitry*/ + IX_FEATURECTRL_USB, /**<bit location for USB Controller*/ + IX_FEATURECTRL_HASH, /**<bit location for Hashing Coprocessor*/ + IX_FEATURECTRL_AES, /**<bit location for AES Coprocessor*/ + IX_FEATURECTRL_DES, /**<bit location for DES Coprocessor*/ + IX_FEATURECTRL_HDLC, /**<bit location for HDLC Coprocessor*/ + IX_FEATURECTRL_AAL, /**<bit location for AAL Coprocessor*/ + IX_FEATURECTRL_HSS, /**<bit location for HSS Coprocessor*/ + IX_FEATURECTRL_UTOPIA, /**<bit location for UTOPIA Coprocessor*/ + IX_FEATURECTRL_ETH0, /**<bit location for Ethernet 0 Coprocessor*/ + IX_FEATURECTRL_ETH1, /**<bit location for Ethernet 1 Coprocessor*/ + IX_FEATURECTRL_NPEA, /**<bit location for NPE A*/ + IX_FEATURECTRL_NPEB, /**<bit location for NPE B*/ + IX_FEATURECTRL_NPEC, /**<bit location for NPE C*/ + IX_FEATURECTRL_PCI, /**<bit location for PCI Controller*/ + IX_FEATURECTRL_ECC_TIMESYNC, /**<bit location for TimeSync Coprocessor*/ + IX_FEATURECTRL_UTOPIA_PHY_LIMIT, /**<bit location for Utopia PHY Limit Status*/ + IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2, /**<2nd bit of PHY limit status*/ + IX_FEATURECTRL_USB_HOST_CONTROLLER, /**<bit location for USB host controller*/ + IX_FEATURECTRL_NPEA_ETH, /**<bit location for NPE-A Ethernet Disable*/ + IX_FEATURECTRL_NPEB_ETH, /**<bit location for NPE-B Ethernet 1-3 Coprocessors Disable*/ + IX_FEATURECTRL_RSA, /**<bit location for RSA Crypto block Coprocessors Disable*/ + IX_FEATURECTRL_XSCALE_MAX_FREQ, /**<bit location for XScale max frequency*/ + IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2, /**<2nd xscale max freq bit NOT TO BE USED */ + IX_FEATURECTRL_MAX_COMPONENTS +} IxFeatureCtrlComponentType; + +/** + * @ingroup IxFeatureCtrlDeviceId + * + * @enum IxFeatureCtrlDeviceId + * + * @brief Enumeration for device type. + * + * @warning This enum is closely related to the npe image. Its format should comply + * with formats used in the npe image ImageID. This is indicated by the + * first nibble of the image ID. This should also be in sync with the + * with what is defined in CP15. Current available formats are + * - IXP42X - 0000 + * - IXP46X - 0001 + * + */ +typedef enum +{ + IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X = 0, /**<Device type is IXP42X */ + IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X, /**<Device type is IXP46X */ + IX_FEATURE_CTRL_DEVICE_TYPE_MAX /**<Max devices */ +} IxFeatureCtrlDeviceId; + + +/** + * @} addtogroup IxFeatureCtrlSwConfig + */ + +/* + * Typedefs + */ + +/** + * @ingroup IxFeatureCtrlAPI + * + * @typedef IxFeatureCtrlReg + * + * @brief Feature Control Register that contains hardware components' + * availability information. + */ +typedef UINT32 IxFeatureCtrlReg; + +/** + * @ingroup IxFeatureCtrlAPI + * + * @typedef IxFeatureCtrlProductId + * + * @brief Product ID of Silicon that contains Silicon Stepping and + * Maximum XScale Core Frequency information. + */ +typedef UINT32 IxFeatureCtrlProductId; + +/* + * Prototypes for interface functions + */ + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IxFeatureCtrlReg ixFeatureCtrlRead (void) + * + * @brief This function reads out the CURRENT value of Feature Control Register. + * The current value may not be the same as that of the hardware component + * availability. + * + * The bit location of each hardware component is defined above. + * A value of '1' in bit means the hardware component is not available. A value of '0' + * means the hardware component is available. + * + * @return + * - IxFeatureCtrlReg - the current value of IXP400 Feature Control Register + */ +PUBLIC IxFeatureCtrlReg +ixFeatureCtrlRead (void); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IxFeatureDeviceId ixFeatureCtrlDeviceRead (void) + * + * @brief This function gets the type of device that the software is currently running + * on + * + * This function reads the feature Ctrl register specifically to obtain the device id. + * The definitions of the avilable IDs are as above. + * + * @return + * - IxFeatureCtrlDeviceId - the type of device currently running + */ +IxFeatureCtrlDeviceId +ixFeatureCtrlDeviceRead (void); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IxFeatureCtrlBuildDevice ixFeatureCtrlSoftwareBuildGet (void) + * + * @brief This function refers to the value set by the compiler flag to determine + * the type of device the software is built for. + * + * The function reads the compiler flag to determine the device the software is + * built for. When the user executes build in the command line, + * a compile time flag (__ixp42X/__ixp46X is set. This API reads this + * flag and returns the software build type to the calling client. + * + * @return + * - IxFeatureCtrlBuildDevice - the type of device software is built for. + */ +IxFeatureCtrlBuildDevice +ixFeatureCtrlSoftwareBuildGet (void); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IxFeatureCtrlReg ixFeatureCtrlHwCapabilityRead (void) + * + * @brief This function reads out the hardware capability of a silicon type as defined in + * feature control register.This value is different from that returned by + * ixFeatureCtrlRead() because this function returns the actual hardware component + * availability. + * + * The bit location of each hardware component is defined above. + * A value of '1' in bit means the hardware component is not available. A value of '0' + * means the hardware component is available. + * + * @return + * - IxFeatureCtrlReg - the hardware capability of IXP400. + * + * @warning + * - This function must not be called when IXP400 is running as the result + * is undefined. + */ +PUBLIC IxFeatureCtrlReg +ixFeatureCtrlHwCapabilityRead (void); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn void ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg) + * + * @brief This function write the value stored in IxFeatureCtrlReg expUnitReg + * to the Feature Control Register. + * + * The bit location of each hardware component is defined above. + * The write is only effective on available hardware components. Writing '1' in a + * bit will software disable the respective hardware component. A '0' will mean that + * the hardware component will remain to be operable. + * + * @param expUnitReg @ref IxFeatureCtrlReg [in] - The value to be written to feature control + * register. + * + * @return none + * + */ +PUBLIC void +ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IX_STATUS ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType) + * + * @brief This function will check the availability of hardware component specified + * as componentType value. + * + * Usage Example:<br> + * - if(IX_FEATURE_CTRL_COMPONENT_DISABLED != + * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0)) <br> + * - if(IX_FEATURE_CTRL_COMPONENT_ENABLED == + * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_PCI)) <br> + * + * This function is typically called during component initialization time. + * + * @param componentType @ref IxFeatureCtrlComponentType [in] - the type of a component as + * defined above as IX_FEATURECTRL_XXX (Exp: IX_FEATURECTRL_PCI, IX_FEATURECTRL_ETH0) + + * + * @return + * - IX_FEATURE_CTRL_COMPONENT_ENABLED if component is available + * - IX_FEATURE_CTRL_COMPONENT_DISABLED if component is unavailable + */ +PUBLIC IX_STATUS +ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IxFeatureCtrlProductId ixFeatureCtrlProductIdRead (void) + * + * @brief This function will return IXP400 product ID i.e. CP15, + * Register 0. + * + * @return + * - IxFeatureCtrlProductId - the value of product ID. + * + */ +PUBLIC IxFeatureCtrlProductId +ixFeatureCtrlProductIdRead (void) ; + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn IX_STATUS ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType) + * + * @brief This function checks whether the specified software configuration is + * enabled or disabled. + * + * Usage Example:<br> + * - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED != + * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br> + * - if(IX_FEATURE_CTRL_SWCONFIG_ENABLED == + * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br> + * + * This function is typically called during access component initialization time. + * + * @param swConfigType @ref IxFeatureCtrlSwConfig [in] - the type of a software configuration + * defined in IxFeatureCtrlSwConfig enumeration. + * + * @return + * - IX_FEATURE_CTRL_SWCONFIG_ENABLED if software configuration is enabled. + * - IX_FEATURE_CTRL_SWCONFIG_DISABLED if software configuration is disabled. + */ +PUBLIC IX_STATUS +ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn void ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled) + * + * @brief This function enable/disable the specified software configuration. + * + * Usage Example:<br> + * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, TRUE) is used + * to enable Ethernet Learning Feature <br> + * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, FALSE) is used + * to disable Ethernet Learning Feature <br> + * + * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration + * defined in IxFeatureCtrlSwConfig enumeration. + * @param enabled BOOL [in] - To enable(TRUE) / disable (FALSE) the specified software + * configuration. + * + * @return none + * + */ +PUBLIC void +ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled); + +/** + * @ingroup IxFeatureCtrlAPI + * + * @fn void ixFeatureCtrlIxp400SwVersionShow (void) + * + * @brief This function shows the current software release information for IXP400 + * + * @return none + * + */ +PUBLIC void +ixFeatureCtrlIxp400SwVersionShow (void); + +#endif /* IXFEATURECTRL_H */ + +/** + * @} defgroup IxFeatureCtrlAPI + */ diff --git a/drivers/net/npe/include/IxHssAcc.h b/drivers/net/npe/include/IxHssAcc.h new file mode 100644 index 0000000000..07bb119b0b --- /dev/null +++ b/drivers/net/npe/include/IxHssAcc.h @@ -0,0 +1,1316 @@ +/** + * @file IxHssAcc.h + * + * @date 07-DEC-2001 + * + * @brief This file contains the public API of the IXP400 HSS Access + * component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* ------------------------------------------------------ + Doxygen group definitions + ------------------------------------------------------ */ +/** + * @defgroup IxHssAccAPI IXP400 HSS Access (IxHssAcc) API + * + * @brief The public API for the IXP400 HssAccess component + * + * IxHssAcc is the access layer to the HSS packetised and channelised + * services + * + * <b> Design Notes </b><br> + * <UL> + * <LI>When a packet-pipe is configured for 56Kbps RAW mode, byte alignment of + * the transmitted data is not preserved. All raw data that is transmitted + * will be received in proper order by the receiver, but the first bit of + * the packet may be seen at any offset within a byte; all subsequent bytes + * will have the same offset for the duration of the packet. The same offset + * also applies to all subsequent packets received on the packet-pipe too. + * (Similar results will occur for data received from remote end.) While + * this behavior will also occur for 56Kbps HDLC mode, the HDLC + * encoding/decoding will preserve the original byte alignment at the + * receiver end. + * </UL> + * + * <b> 56Kbps Packetised Service Bandwidth Limitation </b><br> + * <UL> + * <LI>IxHssAcc supports 56Kbps packetised service at a maximum aggregate rate + * for all HSS ports/HDLC channels of 12.288Mbps[1] in each direction, i.e. + * it supports 56Kbps packetised service on up to 8 T1 trunks. It does + * not support 56Kbps packetised service on 8 E1 trunks (i.e. 4 trunks per + * HSS port) unless those trunks are running 'fractional E1' with maximum + * aggregate rate of 12.288 Mbps in each direction.<br> + * [1] 12.288Mbps = 1.536Mbp * 8 T1 + * </UL> + * @{ */ + +#ifndef IXHSSACC_H +#define IXHSSACC_H + +#include "IxOsal.h" + +/* + * #defines for function return types, etc. + */ + +/** + * @def IX_HSSACC_TSLOTS_PER_HSS_PORT + * + * @brief The max number of TDM timeslots supported per HSS port - 4E1's = + * 32x4 = 128 + */ +#define IX_HSSACC_TSLOTS_PER_HSS_PORT 128 + +/* ----------------------------------------------------------- + The following are HssAccess return values returned through + service interfaces. The globally defined IX_SUCCESS (0) and + IX_FAIL (1) in IxOsalTypes.h are also used. + ----------------------------------------------------------- */ +/** + * @def IX_HSSACC_PARAM_ERR + * + * @brief HssAccess function return value for a parameter error + */ +#define IX_HSSACC_PARAM_ERR 2 + +/** + * @def IX_HSSACC_RESOURCE_ERR + * + * @brief HssAccess function return value for a resource error + */ +#define IX_HSSACC_RESOURCE_ERR 3 + +/** + * @def IX_HSSACC_PKT_DISCONNECTING + * + * @brief Indicates that a disconnect call is progressing and will + * disconnect soon + */ +#define IX_HSSACC_PKT_DISCONNECTING 4 + +/** + * @def IX_HSSACC_Q_WRITE_OVERFLOW + * + * @brief Indicates that an attempt to Tx or to replenish an + * RxFree Q failed due to Q overflow. + */ +#define IX_HSSACC_Q_WRITE_OVERFLOW 5 + +/* ------------------------------------------------------------------- + The following errors are HSS/NPE errors returned on error retrieval + ------------------------------------------------------------------- */ +/** + * @def IX_HSSACC_NO_ERROR + * + * @brief HSS port no error present + */ +#define IX_HSSACC_NO_ERROR 0 + +/** + * @def IX_HSSACC_TX_FRM_SYNC_ERR + * + * @brief HSS port TX Frame Sync error + */ +#define IX_HSSACC_TX_FRM_SYNC_ERR 1 + +/** + * @def IX_HSSACC_TX_OVER_RUN_ERR + * + * @brief HSS port TX over-run error + */ +#define IX_HSSACC_TX_OVER_RUN_ERR 2 + +/** + * @def IX_HSSACC_CHANNELISED_SW_TX_ERR + * + * @brief NPE software error in channelised TX + */ +#define IX_HSSACC_CHANNELISED_SW_TX_ERR 3 + +/** + * @def IX_HSSACC_PACKETISED_SW_TX_ERR + * + * @brief NPE software error in packetised TX + */ +#define IX_HSSACC_PACKETISED_SW_TX_ERR 4 + +/** + * @def IX_HSSACC_RX_FRM_SYNC_ERR + * + * @brief HSS port RX Frame Sync error + */ +#define IX_HSSACC_RX_FRM_SYNC_ERR 5 + +/** + * @def IX_HSSACC_RX_OVER_RUN_ERR + * + * @brief HSS port RX over-run error + */ +#define IX_HSSACC_RX_OVER_RUN_ERR 6 + +/** + * @def IX_HSSACC_CHANNELISED_SW_RX_ERR + * + * @brief NPE software error in channelised RX + */ +#define IX_HSSACC_CHANNELISED_SW_RX_ERR 7 + +/** + * @def IX_HSSACC_PACKETISED_SW_RX_ERR + * + * @brief NPE software error in packetised TX + */ +#define IX_HSSACC_PACKETISED_SW_RX_ERR 8 + +/* ----------------------------------- + Packetised service specific defines + ----------------------------------- */ + +/** + * @def IX_HSSACC_PKT_MIN_RX_MBUF_SIZE + * + * @brief Minimum size of the Rx mbuf in bytes which the client must supply + * to the component. + */ +#define IX_HSSACC_PKT_MIN_RX_MBUF_SIZE 64 + +/* -------------------------------------------------------------------- + Enumerated Types - these enumerated values may be used in setting up + the contents of hardware registers + -------------------------------------------------------------------- */ +/** + * @enum IxHssAccHssPort + * @brief The HSS port ID - There are two identical ports (0-1). + * + */ +typedef enum +{ + IX_HSSACC_HSS_PORT_0, /**< HSS Port 0 */ + IX_HSSACC_HSS_PORT_1, /**< HSS Port 1 */ + IX_HSSACC_HSS_PORT_MAX /**< Delimiter for error checks */ +} IxHssAccHssPort; + +/** + * @enum IxHssAccHdlcPort + * @brief The HDLC port ID - There are four identical HDLC ports (0-3) per + * HSS port and they correspond to the 4 E1/T1 trunks. + * + */ +typedef enum +{ + IX_HSSACC_HDLC_PORT_0, /**< HDLC Port 0 */ + IX_HSSACC_HDLC_PORT_1, /**< HDLC Port 1 */ + IX_HSSACC_HDLC_PORT_2, /**< HDLC Port 2 */ + IX_HSSACC_HDLC_PORT_3, /**< HDLC Port 3 */ + IX_HSSACC_HDLC_PORT_MAX /**< Delimiter for error checks */ +} IxHssAccHdlcPort; + +/** + * @enum IxHssAccTdmSlotUsage + * @brief The HSS TDM stream timeslot assignment types + * + */ +typedef enum +{ + IX_HSSACC_TDMMAP_UNASSIGNED, /**< Unassigned */ + IX_HSSACC_TDMMAP_HDLC, /**< HDLC - packetised */ + IX_HSSACC_TDMMAP_VOICE56K, /**< Voice56K - channelised */ + IX_HSSACC_TDMMAP_VOICE64K, /**< Voice64K - channelised */ + IX_HSSACC_TDMMAP_MAX /**< Delimiter for error checks */ +} IxHssAccTdmSlotUsage; + +/** + * @enum IxHssAccFrmSyncType + * @brief The HSS frame sync pulse type + * + */ +typedef enum +{ + IX_HSSACC_FRM_SYNC_ACTIVE_LOW, /**< Frame sync is sampled low */ + IX_HSSACC_FRM_SYNC_ACTIVE_HIGH, /**< sampled high */ + IX_HSSACC_FRM_SYNC_FALLINGEDGE, /**< sampled on a falling edge */ + IX_HSSACC_FRM_SYNC_RISINGEDGE, /**< sampled on a rising edge */ + IX_HSSACC_FRM_SYNC_TYPE_MAX /**< Delimiter for error checks */ +} IxHssAccFrmSyncType; + +/** + * @enum IxHssAccFrmSyncEnable + * @brief The IxHssAccFrmSyncEnable determines how the frame sync pulse is + * used + * */ +typedef enum +{ + IX_HSSACC_FRM_SYNC_INPUT, /**< Frame sync is sampled as an input */ + IX_HSSACC_FRM_SYNC_INVALID_VALUE, /**< 1 is not used */ + IX_HSSACC_FRM_SYNC_OUTPUT_FALLING, /**< Frame sync is an output generated + off a falling clock edge */ + IX_HSSACC_FRM_SYNC_OUTPUT_RISING, /**< Frame sync is an output generated + off a rising clock edge */ + IX_HSSACC_FRM_SYNC_ENABLE_MAX /**< Delimiter for error checks */ +} IxHssAccFrmSyncEnable; + +/** + * @enum IxHssAccClkEdge + * @brief IxHssAccClkEdge is used to determine the clk edge to use for + * framing and data + * + */ +typedef enum +{ + IX_HSSACC_CLK_EDGE_FALLING, /**< Clock sampled off a falling edge */ + IX_HSSACC_CLK_EDGE_RISING, /**< Clock sampled off a rising edge */ + IX_HSSACC_CLK_EDGE_MAX /**< Delimiter for error checks */ +} IxHssAccClkEdge; + +/** + * @enum IxHssAccClkDir + * @brief The HSS clock direction + * + */ +typedef enum +{ + IX_HSSACC_SYNC_CLK_DIR_INPUT, /**< Clock is an input */ + IX_HSSACC_SYNC_CLK_DIR_OUTPUT, /**< Clock is an output */ + IX_HSSACC_SYNC_CLK_DIR_MAX /**< Delimiter for error checks */ +} IxHssAccClkDir; + +/** + * @enum IxHssAccFrmPulseUsage + * @brief The HSS frame pulse usage + * + */ +typedef enum +{ + IX_HSSACC_FRM_PULSE_ENABLED, /**< Generate/Receive frame pulses */ + IX_HSSACC_FRM_PULSE_DISABLED, /**< Disregard frame pulses */ + IX_HSSACC_FRM_PULSE_MAX /**< Delimiter for error checks */ +} IxHssAccFrmPulseUsage; + +/** + * @enum IxHssAccDataRate + * @brief The HSS Data rate in relation to the clock + * + */ +typedef enum +{ + IX_HSSACC_CLK_RATE, /**< Data rate is at the configured clk speed */ + IX_HSSACC_HALF_CLK_RATE, /**< Data rate is half the configured clk speed */ + IX_HSSACC_DATA_RATE_MAX /**< Delimiter for error checks */ +} IxHssAccDataRate; + +/** + * @enum IxHssAccDataPolarity + * @brief The HSS data polarity type + * + */ +typedef enum +{ + IX_HSSACC_DATA_POLARITY_SAME, /**< Don't invert data between NPE and + HSS FIFOs */ + IX_HSSACC_DATA_POLARITY_INVERT, /**< Invert data between NPE and HSS + FIFOs */ + IX_HSSACC_DATA_POLARITY_MAX /**< Delimiter for error checks */ +} IxHssAccDataPolarity; + +/** + * @enum IxHssAccBitEndian + * @brief HSS Data endianness + * + */ +typedef enum +{ + IX_HSSACC_LSB_ENDIAN, /**< TX/RX Least Significant Bit first */ + IX_HSSACC_MSB_ENDIAN, /**< TX/RX Most Significant Bit first */ + IX_HSSACC_ENDIAN_MAX /**< Delimiter for the purposes of error checks */ +} IxHssAccBitEndian; + + +/** + * @enum IxHssAccDrainMode + * @brief Tx pin open drain mode + * + */ +typedef enum +{ + IX_HSSACC_TX_PINS_NORMAL, /**< Normal mode */ + IX_HSSACC_TX_PINS_OPEN_DRAIN, /**< Open Drain mode */ + IX_HSSACC_TX_PINS_MAX /**< Delimiter for error checks */ +} IxHssAccDrainMode; + +/** + * @enum IxHssAccSOFType + * @brief HSS start of frame types + * + */ +typedef enum +{ + IX_HSSACC_SOF_FBIT, /**< Framing bit transmitted and expected on rx */ + IX_HSSACC_SOF_DATA, /**< Framing bit not transmitted nor expected on rx */ + IX_HSSACC_SOF_MAX /**< Delimiter for error checks */ +} IxHssAccSOFType; + +/** + * @enum IxHssAccDataEnable + * @brief IxHssAccDataEnable is used to determine whether or not to drive + * the data pins + * + */ +typedef enum +{ + IX_HSSACC_DE_TRI_STATE, /**< TRI-State the data pins */ + IX_HSSACC_DE_DATA, /**< Push data out the data pins */ + IX_HSSACC_DE_MAX /**< Delimiter for error checks */ +} IxHssAccDataEnable; + +/** + * @enum IxHssAccTxSigType + * @brief IxHssAccTxSigType is used to determine how to drive the data pins + * + */ +typedef enum +{ + IX_HSSACC_TXSIG_LOW, /**< Drive the data pins low */ + IX_HSSACC_TXSIG_HIGH, /**< Drive the data pins high */ + IX_HSSACC_TXSIG_HIGH_IMP, /**< Drive the data pins with high impedance */ + IX_HSSACC_TXSIG_MAX /**< Delimiter for error checks */ +} IxHssAccTxSigType; + +/** + * @enum IxHssAccFbType + * @brief IxHssAccFbType determines how to drive the Fbit + * + * @warning This will only be used for T1 @ 1.544MHz + * + */ +typedef enum +{ + IX_HSSACC_FB_FIFO, /**< Fbit is dictated in FIFO */ + IX_HSSACC_FB_HIGH_IMP, /**< Fbit is high impedance */ + IX_HSSACC_FB_MAX /**< Delimiter for error checks */ +} IxHssAccFbType; + +/** + * @enum IxHssAcc56kEndianness + * @brief 56k data endianness when using the 56k type + * + */ +typedef enum +{ + IX_HSSACC_56KE_BIT_7_UNUSED, /**< High bit is unused */ + IX_HSSACC_56KE_BIT_0_UNUSED, /**< Low bit is unused */ + IX_HSSACC_56KE_MAX /**< Delimiter for error checks */ +} IxHssAcc56kEndianness; + +/** + * @enum IxHssAcc56kSel + * @brief 56k data transmission type when using the 56k type + * + */ +typedef enum +{ + IX_HSSACC_56KS_32_8_DATA, /**< 32/8 bit data */ + IX_HSSACC_56KS_56K_DATA, /**< 56K data */ + IX_HSSACC_56KS_MAX /**< Delimiter for error checks */ +} IxHssAcc56kSel; + + +/** + * @enum IxHssAccClkSpeed + * @brief IxHssAccClkSpeed represents the HSS clock speeds available + * + */ +typedef enum +{ + IX_HSSACC_CLK_SPEED_512KHZ, /**< 512KHz */ + IX_HSSACC_CLK_SPEED_1536KHZ, /**< 1.536MHz */ + IX_HSSACC_CLK_SPEED_1544KHZ, /**< 1.544MHz */ + IX_HSSACC_CLK_SPEED_2048KHZ, /**< 2.048MHz */ + IX_HSSACC_CLK_SPEED_4096KHZ, /**< 4.096MHz */ + IX_HSSACC_CLK_SPEED_8192KHZ, /**< 8.192MHz */ + IX_HSSACC_CLK_SPEED_MAX /**< Delimiter for error checking */ +} IxHssAccClkSpeed; + +/** + * @enum IxHssAccPktStatus + * @brief Indicates the status of packets passed to the client + * + */ +typedef enum +{ + IX_HSSACC_PKT_OK, /**< Error free.*/ + IX_HSSACC_STOP_SHUTDOWN_ERROR, /**< Errored due to stop or shutdown + occurrance.*/ + IX_HSSACC_HDLC_ALN_ERROR, /**< HDLC alignment error */ + IX_HSSACC_HDLC_FCS_ERROR, /**< HDLC Frame Check Sum error.*/ + IX_HSSACC_RXFREE_Q_EMPTY_ERROR, /**< RxFree Q became empty + while receiving this packet.*/ + IX_HSSACC_HDLC_MAX_FRAME_SIZE_EXCEEDED, /**< HDLC frame size + received is greater than + max specified at connect.*/ + IX_HSSACC_HDLC_ABORT_ERROR, /**< HDLC frame received is invalid due to an + abort sequence received.*/ + IX_HSSACC_DISCONNECT_IN_PROGRESS /**< Packet returned + because a disconnect is in progress */ +} IxHssAccPktStatus; + + +/** + * @enum IxHssAccPktCrcType + * @brief HDLC CRC type + * + */ +typedef enum +{ + IX_HSSACC_PKT_16_BIT_CRC = 16, /**< 16 bit CRC is being used */ + IX_HSSACC_PKT_32_BIT_CRC = 32 /**< 32 bit CRC is being used */ +} IxHssAccPktCrcType; + +/** + * @enum IxHssAccPktHdlcIdleType + * @brief HDLC idle transmission type + * + */ +typedef enum +{ + IX_HSSACC_HDLC_IDLE_ONES, /**< idle tx/rx will be a succession of ones */ + IX_HSSACC_HDLC_IDLE_FLAGS /**< idle tx/rx will be repeated flags */ +} IxHssAccPktHdlcIdleType; + +/** + * @brief Structure containing HSS port configuration parameters + * + * Note: All of these are used for TX. Only some are specific to RX. + * + */ +typedef struct +{ + IxHssAccFrmSyncType frmSyncType; /**< frame sync pulse type (tx/rx) */ + IxHssAccFrmSyncEnable frmSyncIO; /**< how the frame sync pulse is + used (tx/rx) */ + IxHssAccClkEdge frmSyncClkEdge; /**< frame sync clock edge type + (tx/rx) */ + IxHssAccClkEdge dataClkEdge; /**< data clock edge type (tx/rx) */ + IxHssAccClkDir clkDirection; /**< clock direction (tx/rx) */ + IxHssAccFrmPulseUsage frmPulseUsage; /**< whether to use the frame sync + pulse or not (tx/rx) */ + IxHssAccDataRate dataRate; /**< data rate in relation to the + clock (tx/rx) */ + IxHssAccDataPolarity dataPolarity; /**< data polarity type (tx/rx) */ + IxHssAccBitEndian dataEndianness; /**< data endianness (tx/rx) */ + IxHssAccDrainMode drainMode; /**< tx pin open drain mode (tx) */ + IxHssAccSOFType fBitUsage; /**< start of frame types (tx/rx) */ + IxHssAccDataEnable dataEnable; /**< whether or not to drive the data + pins (tx) */ + IxHssAccTxSigType voice56kType; /**< how to drive the data pins for + voice56k type (tx) */ + IxHssAccTxSigType unassignedType; /**< how to drive the data pins for + unassigned type (tx) */ + IxHssAccFbType fBitType; /**< how to drive the Fbit (tx) */ + IxHssAcc56kEndianness voice56kEndian;/**< 56k data endianness when using + the 56k type (tx) */ + IxHssAcc56kSel voice56kSel; /**< 56k data transmission type when + using the 56k type (tx) */ + unsigned frmOffset; /**< frame pulse offset in bits wrt + the first timeslot (0-1023) (tx/rx) */ + unsigned maxFrmSize; /**< frame size in bits (1-1024) + (tx/rx) */ +} IxHssAccPortConfig; + +/** + * @brief Structure containing HSS configuration parameters + * + */ +typedef struct +{ + IxHssAccPortConfig txPortConfig; /**< HSS tx port configuration */ + IxHssAccPortConfig rxPortConfig; /**< HSS rx port configuration */ + unsigned numChannelised; /**< The number of channelised + timeslots (0-32) */ + unsigned hssPktChannelCount; /**< The number of packetised + clients (0 - 4) */ + UINT8 channelisedIdlePattern; /**< The byte to be transmitted on + channelised service when there + is no client data to tx */ + BOOL loopback; /**< The HSS loopback state */ + unsigned packetizedIdlePattern; /**< The data to be transmitted on + packetised service when there is + no client data to tx */ + IxHssAccClkSpeed clkSpeed; /**< The HSS clock speed */ +} IxHssAccConfigParams; + +/** + * @brief This structure contains 56Kbps, HDLC-mode configuration parameters + * + */ +typedef struct +{ + BOOL hdlc56kMode; /**< 56kbps(TRUE)/64kbps(FALSE) HDLC */ + IxHssAcc56kEndianness hdlc56kEndian; /**< 56kbps data endianness + - ignored if hdlc56kMode is FALSE*/ + BOOL hdlc56kUnusedBitPolarity0; /**< The polarity '0'(TRUE)/'1'(FALSE) of the unused + bit while in 56kbps mode + - ignored if hdlc56kMode is FALSE*/ +} IxHssAccHdlcMode; + +/** + * @brief This structure contains information required by the NPE to + * configure the HDLC co-processor + * + */ +typedef struct +{ + IxHssAccPktHdlcIdleType hdlcIdleType; /**< What to transmit when a HDLC port is idle */ + IxHssAccBitEndian dataEndian; /**< The HDLC data endianness */ + IxHssAccPktCrcType crcType; /**< The CRC type to be used for this HDLC port */ +} IxHssAccPktHdlcFraming; + +/** + * @typedef UINT32 IxHssAccPktUserId + * + * @brief The client supplied value which will be supplied as a parameter + * with a given callback. + * + * This value will be passed into the ixHssAccPktPortConnect function once each + * with given callbacks. This value will then be passed back to the client + * as one of the parameters to each of these callbacks, + * when these callbacks are called. + */ +typedef UINT32 IxHssAccPktUserId; + + +/** + * @typedef IxHssAccLastErrorCallback + * @brief Prototype of the clients function to accept notification of the + * last error + * + * This function is registered through the config. The client will initiate + * the last error retrieval. The HssAccess component will send a message to + * the NPE through the NPE Message Handler. When a response to the read is + * received, the NPE Message Handler will callback the HssAccess component + * which will execute this function in the same IxNpeMh context. The client + * will be passed the last error and the related service port (packetised + * 0-3, channelised 0) + * + * @param lastHssError unsigned [in] - The last Hss error registered that + * has been registered. + * @param servicePort unsigned [in] - This is the service port number. + * (packetised 0-3, channelised 0) + * + * @return void + */ +typedef void (*IxHssAccLastErrorCallback) (unsigned lastHssError, + unsigned servicePort); + +/** + * @typedef IxHssAccPktRxCallback + * @brief Prototype of the clients function to accept notification of + * packetised rx + * + * This function is registered through the ixHssAccPktPortConnect. hssPktAcc will pass + * received data in the form of mbufs to the client. The mbuf passed back + * to the client could contain a chain of buffers, depending on the packet + * size received. + * + * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contains the + * payload received. + * @param numHssErrs unsigned [in] - This is the number of hssErrors + * the Npe has received + * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the + * mbuf that has been received. + * @param rxUserId @ref IxHssAccPktUserId [in] - This is the client supplied value + * passed in at ixHssAccPktPortConnect time which is now returned to the client. + * + * @return void + */ +typedef void (*IxHssAccPktRxCallback) (IX_OSAL_MBUF *buffer, + unsigned numHssErrs, + IxHssAccPktStatus pktStatus, + IxHssAccPktUserId rxUserId); + +/** + * @typedef IxHssAccPktRxFreeLowCallback + * @brief Prototype of the clients function to accept notification of + * requirement of more Rx Free buffers + * + * The client can choose to register a callback of this type when + * calling a connecting. This function is registered through the ixHssAccPktPortConnect. + * If defined, the access layer will provide the trigger for + * this callback. The callback will be responsible for supplying mbufs to + * the access layer for use on the receive path from the HSS using + * ixHssPktAccFreeBufReplenish. + * + * @return void + */ +typedef void (*IxHssAccPktRxFreeLowCallback) (IxHssAccPktUserId rxFreeLowUserId); + +/** + * @typedef IxHssAccPktTxDoneCallback + * @brief Prototype of the clients function to accept notification of + * completion with Tx buffers + * + * This function is registered through the ixHssAccPktPortConnect. It enables + * the hssPktAcc to pass buffers back to the client + * when transmission is complete. + * + * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contained + * the payload that was for Tx. + * @param numHssErrs unsigned [in] - This is the number of hssErrors + * the Npe has received + * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the + * mbuf that has been transmitted. + * @param txDoneUserId @ref IxHssAccPktUserId [in] - This is the client supplied value + * passed in at ixHssAccPktPortConnect time which is now returned to the client. + * + * @return void + */ +typedef void (*IxHssAccPktTxDoneCallback) (IX_OSAL_MBUF *buffer, + unsigned numHssErrs, + IxHssAccPktStatus pktStatus, + IxHssAccPktUserId txDoneUserId); + +/** + * @typedef IxHssAccChanRxCallback + * @brief Prototype of the clients function to accept notification of + * channelised rx + * + * This callback, if defined by the client in the connect, will get called + * in the context of an IRQ. The IRQ will be triggered when the hssSyncQMQ + * is not empty. The queued entry will be dequeued and this function will + * be executed. + * + * @param hssPortId @ref IxHssAccHssPort - The HSS port Id. There are two + * identical ports (0-1). + * @param txOffset unsigned [in] - an offset indicating from where within + * the txPtrList the NPE is currently transmitting from. + * @param rxOffset unsigned [in] - an offset indicating where within the + * receive buffers the NPE has just written the received data to. + * @param numHssErrs unsigned [in] - This is the number of hssErrors + * the Npe has received + * + * @return void + */ +typedef void (*IxHssAccChanRxCallback) (IxHssAccHssPort hssPortId, + unsigned rxOffset, + unsigned txOffset, + unsigned numHssErrs); + +/* + * Prototypes for interface functions. + */ + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccPortInit (IxHssAccHssPort hssPortId, + IxHssAccConfigParams *configParams, + IxHssAccTdmSlotUsage *tdmMap, + IxHssAccLastErrorCallback lastHssErrorCallback) + * + * @brief Initialise a HSS port. No channelised or packetised connections + * should exist in the HssAccess layer while this interface is being called. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param *configParams @ref IxHssAccConfigParams [in] - A pointer to the HSS + * configuration structure + * @param *tdmMap @ref IxHssAccTdmSlotUsage [in] - A pointer to an array of size + * IX_HSSACC_TSLOTS_PER_HSS_PORT, defining the slot usage over the HSS port + * @param lastHssErrorCallback @ref IxHssAccLastErrorCallback [in] - Client + * callback to report last error + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccPortInit (IxHssAccHssPort hssPortId, + IxHssAccConfigParams *configParams, + IxHssAccTdmSlotUsage *tdmMap, + IxHssAccLastErrorCallback lastHssErrorCallback); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccLastErrorRetrievalInitiate ( + IxHssAccHssPort hssPortId) + * + * @brief Initiate the retrieval of the last HSS error. The HSS port + * should be configured before attempting to call this interface. + * + * @param hssPortId @ref IxHssAccHssPort [in] - the HSS port ID + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccLastErrorRetrievalInitiate (IxHssAccHssPort hssPortId); + + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccInit () + * + * @brief This function is responsible for initialising resources for use + * by the packetised and channelised clients. It should be called after + * HSS NPE image has been downloaded into NPE-A and before any other + * HssAccess interface is called. + * No other HssAccPacketised interface should be called while this interface + * is being processed. + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due + * to a resource error + */ +PUBLIC IX_STATUS +ixHssAccInit (void); + + +/** + * + * @ingroup IxHssAccAPI + * + * @fn ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId, + BOOL hdlcFraming, + IxHssAccHdlcMode hdlcMode, + BOOL hdlcBitInvert, + unsigned blockSizeInWords, + UINT32 rawIdleBlockPattern, + IxHssAccPktHdlcFraming hdlcTxFraming, + IxHssAccPktHdlcFraming hdlcRxFraming, + unsigned frmFlagStart, + IxHssAccPktRxCallback rxCallback, + IxHssAccPktUserId rxUserId, + IxHssAccPktRxFreeLowCallback rxFreeLowCallback, + IxHssAccPktUserId rxFreeLowUserId, + IxHssAccPktTxDoneCallback txDoneCallback, + IxHssAccPktUserId txDoneUserId) + * + * @brief This function is responsible for connecting a client to one of + * the 4 available HDLC ports. The HSS port should be configured before + * attempting a connect. No other HssAccPacketised interface should be + * called while this connect is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port and + * it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 + * @param hdlcFraming BOOL [in] - This value determines whether the service + * will use HDLC data or the debug, raw data type i.e. no HDLC processing + * @param hdlcMode @ref IxHssAccHdlcMode [in] - This structure contains 56Kbps, HDLC-mode + * configuration parameters + * @param hdlcBitInvert BOOL [in] - This value determines whether bit inversion + * will occur between HDLC and HSS co-processors i.e. post-HDLC processing for + * transmit and pre-HDLC processing for receive, for the specified HDLC Termination + * Point + * @param blockSizeInWords unsigned [in] - The max tx/rx block size + * @param rawIdleBlockPattern UINT32 [in] - Tx idle pattern in raw mode + * @param hdlcTxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains + * the following information required by the NPE to configure the HDLC + * co-processor for TX + * @param hdlcRxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains + * the following information required by the NPE to configure the HDLC + * co-processor for RX + * @param frmFlagStart unsigned - Number of flags to precede to + * transmitted flags (0-2). + * @param rxCallback @ref IxHssAccPktRxCallback [in] - Pointer to + * the clients packet receive function. + * @param rxUserId @ref IxHssAccPktUserId [in] - The client supplied rx value + * to be passed back as an argument to the supplied rxCallback + * @param rxFreeLowCallback @ref IxHssAccPktRxFreeLowCallback [in] - Pointer to + * the clients Rx free buffer request function. If NULL, assume client will + * trigger independently. + * @param rxFreeLowUserId @ref IxHssAccPktUserId [in] - The client supplied RxFreeLow value + * to be passed back as an argument to the supplied rxFreeLowCallback + * @param txDoneCallback @ref IxHssAccPktTxDoneCallback [in] - Pointer to the + * clients Tx done callback function + * @param txDoneUserId @ref IxHssAccPktUserId [in] - The client supplied txDone value + * to be passed back as an argument to the supplied txDoneCallback + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due + * to a resource error + */ +PUBLIC IX_STATUS +ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId, + BOOL hdlcFraming, + IxHssAccHdlcMode hdlcMode, + BOOL hdlcBitInvert, + unsigned blockSizeInWords, + UINT32 rawIdleBlockPattern, + IxHssAccPktHdlcFraming hdlcTxFraming, + IxHssAccPktHdlcFraming hdlcRxFraming, + unsigned frmFlagStart, + IxHssAccPktRxCallback rxCallback, + IxHssAccPktUserId rxUserId, + IxHssAccPktRxFreeLowCallback rxFreeLowCallback, + IxHssAccPktUserId rxFreeLowUserId, + IxHssAccPktTxDoneCallback txDoneCallback, + IxHssAccPktUserId txDoneUserId); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId) + * + * @brief This function is responsible for enabling a packetised service + * for the specified HSS/HDLC port combination. It enables the RX flow. The + * client must have already connected to a packetised service and is responsible + * for ensuring an adequate amount of RX mbufs have been supplied to the access + * component before enabling the packetised service. This function must be called + * on a given port before any call to ixHssAccPktPortTx on the same port. + * No other HssAccPacketised interface should be called while this interface is + * being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to enable the service + * on. + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId); + +/** + * @fn IX_STATUS ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId) + * + * @brief This function is responsible for disabling a packetised service + * for the specified HSS/HDLC port combination. It disables the RX flow. + * The client must have already connected to and enabled a packetised service + * for the specified HDLC port. This disable interface can be called before a + * disconnect, but is not required to. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to disable + * the service on. + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId) + * + * @brief This function is responsible for disconnecting a client from one + * of the 4 available HDLC ports. It is not required that the Rx Flow + * has been disabled before calling this function. If the RX Flow has not been + * disabled, the disconnect will disable it before proceeding with the + * disconnect. No other HssAccPacketised + * interface should be called while this interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port + * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PKT_DISCONNECTING The function has initiated the disconnecting + * procedure but it has not completed yet. + */ +PUBLIC IX_STATUS +ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn BOOL ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId) + * + * @brief This function is called to check if a given HSS/HDLC port + * combination is in a connected state or not. This function may be called + * at any time to determine a ports state. No other HssAccPacketised + * interface should be called while this interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port + * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 + * + * @return + * - TRUE The state of this HSS/HDLC port combination is disconnected, + * so if a disconnect was called, it is now completed. + * - FALSE The state of this HSS/HDLC port combination is connected, + * so if a disconnect was called, it is not yet completed. + */ +PUBLIC BOOL +ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId); + + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId, + IX_OSAL_MBUF *buffer) + * + * @brief Function which the client calls at regular intervals to provide + * mbufs to the access component for RX. A connection should exist for + * the specified hssPortId/hdlcPortId combination before attempting to call this + * interface. Also, the connection should not be in a disconnecting state. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port + * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 + * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a free mbuf to filled with payload. + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due + * to a resource error + * - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q + * overflow + */ +PUBLIC IX_STATUS +ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId, + IX_OSAL_MBUF *buffer); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccPktPortTx (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId, + IX_OSAL_MBUF *buffer) + * + * @brief Function which the client calls when it wants to transmit + * packetised data. An enabled connection should exist on the specified + * hssPortId/hdlcPortId combination before attempting to call this interface. + * No other HssAccPacketised + * interface should be called while this interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port + * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 + * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a chain of mbufs which the + * client has filled with the payload + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due + * to a resource error. See note. + * - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q + * overflow + * + * @note IX_HSSACC_RESOURCE_ERR is returned when a free descriptor cannot be + * obtained to send the chain of mbufs to the NPE. This is a normal scenario. + * HssAcc has a pool of descriptors and this error means that they are currently + * all in use. + * The recommended approach to this is to retry until a descriptor becomes free + * and the packet is successfully transmitted. + * Alternatively, the user could wait until the next IxHssAccPktTxDoneCallback + * callback is triggered, and then retry, as it is this event that causes a + * transmit descriptor to be freed. + */ +PUBLIC IX_STATUS +ixHssAccPktPortTx (IxHssAccHssPort hssPortId, + IxHssAccHdlcPort hdlcPortId, + IX_OSAL_MBUF *buffer); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccChanConnect (IxHssAccHssPort hssPortId, + unsigned bytesPerTSTrigger, + UINT8 *rxCircular, + unsigned numRxBytesPerTS, + UINT32 *txPtrList, + unsigned numTxPtrLists, + unsigned numTxBytesPerBlk, + IxHssAccChanRxCallback rxCallback) + * + * @brief This function allows the client to connect to the Tx/Rx NPE + * Channelised Service. There can only be one client per HSS port. The + * client is responsible for ensuring that the HSS port is configured + * appropriately before its connect request. No other HssAccChannelised + * interface should be called while this interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param bytesPerTSTrigger unsigned [in] - The NPE will trigger the access + * component after bytesPerTSTrigger have been received for all trunk + * timeslots. This figure is a multiple of 8 e.g. 8 for 1ms trigger, 16 for + * 2ms trigger. + * @param *rxCircular UINT8 [in] - A pointer to memory allocated by the + * client to be filled by data received. The buffer at this address is part + * of a pool of buffers to be accessed in a circular fashion. This address + * will be written to by the NPE. Therefore, it needs to be a physical address. + * @param numRxBytesPerTS unsigned [in] - The number of bytes allocated per + * timeslot within the receive memory. This figure will depend on the + * latency of the system. It needs to be deep enough for data to be read by + * the client before the NPE re-writes over that memory e.g. if the client + * samples at a rate of 40bytes per timeslot, numRxBytesPerTS may need to + * be 40bytes * 3. This would give the client 3 * 5ms of time before + * received data is over-written. + * @param *txPtrList UINT32 [in] - The address of an area of contiguous + * memory allocated by the client to be populated with pointers to data for + * transmission. Each pointer list contains a pointer per active channel. + * The txPtrs will point to data to be transmitted by the NPE. Therefore, + * they must point to physical addresses. + * @param numTxPtrLists unsigned [in] - The number of pointer lists in + * txPtrList. This figure is dependent on jitter. + * @param numTxBytesPerBlk unsigned [in] - The size of the Tx data, in + * bytes, that each pointer within the PtrList points to. + * @param rxCallback @ref IxHssAccChanRxCallback [in] - A client function + * pointer to be called back to handle the actual tx/rx of channelised + * data. If this is not NULL, an ISR will call this function. If this + * pointer is NULL, it implies that the client will use a polling mechanism + * to detect when the tx and rx of channelised data is to occur. The client + * will use hssChanAccStatus for this. + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ + +PUBLIC IX_STATUS +ixHssAccChanConnect (IxHssAccHssPort hssPortId, + unsigned bytesPerTSTrigger, + UINT8 *rxCircular, + unsigned numRxBytesPerTS, + UINT32 *txPtrList, + unsigned numTxPtrLists, + unsigned numTxBytesPerBlk, + IxHssAccChanRxCallback rxCallback); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccChanPortEnable (IxHssAccHssPort hssPortId) + * + * @brief This function is responsible for enabling a channelised service + * for the specified HSS port. It enables the NPE RX flow. The client must + * have already connected to a channelised service before enabling the + * channelised service. No other HssAccChannelised + * interface should be called while this interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccChanPortEnable (IxHssAccHssPort hssPortId); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccChanPortDisable (IxHssAccHssPort hssPortId) + * + * @brief This function is responsible for disabling a channelised service + * for the specified HSS port. It disables the NPE RX flow. The client must + * have already connected to and enabled a channelised service for the + * specified HSS port. This disable interface can be called before a + * disconnect, but is not required to. No other HssAccChannelised + * interface should be called while this interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccChanPortDisable (IxHssAccHssPort hssPortId); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccChanDisconnect (IxHssAccHssPort hssPortId) + * + * @brief This function allows the client to Disconnect from a channelised + * service. If the NPE RX Flow has not been disabled, the disconnect will + * disable it before proceeding with other disconnect functionality. + * No other HssAccChannelised interface should be called while this + * interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccChanDisconnect (IxHssAccHssPort hssPortId); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn IX_STATUS ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, + BOOL *dataRecvd, + unsigned *rxOffset, + unsigned *txOffset, + unsigned *numHssErrs) + * + * @brief This function is called by the client to query whether or not + * channelised data has been received. If there is, hssChanAcc will return + * the details in the output parameters. An enabled connection should + * exist on the specified hssPortId before attempting to call this interface. + * No other HssAccChannelised interface should be called while this + * interface is being processed. + * + * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two + * identical ports (0-1). + * @param *dataRecvd BOOL [out] - This BOOL indicates to the client whether + * or not the access component has read any data for the client. If + * FALSE, the other output parameters will not have been written to. + * @param *rxOffset unsigned [out] - An offset to indicate to the client + * where within the receive buffers the NPE has just written the received + * data to. + * @param *txOffset unsigned [out] - An offset to indicate to the client + * from where within the txPtrList the NPE is currently transmitting from + * @param *numHssErrs unsigned [out] - The total number of HSS port errors + * since initial port configuration + * + * + * @return + * - IX_SUCCESS The function executed successfully + * - IX_FAIL The function did not execute successfully + * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a + * parameter error + */ +PUBLIC IX_STATUS +ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, + BOOL *dataRecvd, + unsigned *rxOffset, + unsigned *txOffset, + unsigned *numHssErrs); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn void ixHssAccShow (void) + * + * @brief This function will display the current state of the IxHssAcc + * component. The output is sent to stdout. + * + * @return void + */ +PUBLIC void +ixHssAccShow (void); + +/** + * + * @ingroup IxHssAccAPI + * + * @fn void ixHssAccStatsInit (void) + * + * @brief This function will reset the IxHssAcc statistics. + * + * @return void + */ +PUBLIC void +ixHssAccStatsInit (void); + +#endif /* IXHSSACC_H */ + +/** + * @} defgroup IxHssAcc + */ diff --git a/drivers/net/npe/include/IxI2cDrv.h b/drivers/net/npe/include/IxI2cDrv.h new file mode 100644 index 0000000000..92c6b24b46 --- /dev/null +++ b/drivers/net/npe/include/IxI2cDrv.h @@ -0,0 +1,867 @@ +/** + * @file IxI2cDrv.h + * + * @brief Header file for the IXP400 I2C Driver (IxI2cDrv) + * + * @version $Revision: 0.1 $ + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxI2cDrv IXP400 I2C Driver(IxI2cDrv) API + * + * @brief IXP400 I2C Driver Public API + * + * @{ + */ +#ifndef IXI2CDRV_H +#define IXI2CDRV_H + +#ifdef __ixp46X +#include "IxOsal.h" + +/* + * Section for #define + */ + +/** + * @ingroup IxI2cDrv + * @brief The interval of micro/mili seconds the IXP will wait before it polls for + * status from the ixI2cIntrXferStatus; Every 20us is 1 byte @ + * 400Kbps and 4 bytes @ 100Kbps. This is dependent on delay type selected + * through the API ixI2cDrvDelayTypeSelect. + */ +#define IX_I2C_US_POLL_FOR_XFER_STATUS 20 + +/** + * @ingroup IxI2cDrv + * @brief The number of tries that will be attempted to call a callback + * function if the callback does not or is unable to resolve the + * issue it is called to resolve + */ +#define IX_I2C_NUM_OF_TRIES_TO_CALL_CALLBACK_FUNC 10 + + +/** + * @ingroup IxI2cDrv + * @brief Number of tries slave will poll the IDBR Rx full bit before it + * gives up + */ +#define IX_I2C_NUM_TO_POLL_IDBR_RX_FULL 0x100 + +/** + * @ingroup IxI2cDrv + * @brief Number of tries slave will poll the IDBR Tx empty bit before it + * gives up + */ +#define IX_I2C_NUM_TO_POLL_IDBR_TX_EMPTY 0x100 + +/* + * Section for enum + */ + +/** + * @ingroup IxI2cDrv + * + * @enum IxI2cMasterStatus + * + * @brief The master status - transfer complete, bus error or arbitration loss + */ +typedef enum +{ + IX_I2C_MASTER_XFER_COMPLETE = IX_SUCCESS, + IX_I2C_MASTER_XFER_BUS_ERROR, + IX_I2C_MASTER_XFER_ARB_LOSS +} IxI2cMasterStatus; + + +/** + * @ingroup IxI2cDrv + * + * @enum IX_I2C_STATUS + * + * @brief The status that can be returned in a I2C driver initialization + */ +typedef enum +{ + IX_I2C_SUCCESS = IX_SUCCESS, /**< Success status */ + IX_I2C_FAIL, /**< Fail status */ + IX_I2C_NOT_SUPPORTED, /**< hardware does not have dedicated I2C hardware */ + IX_I2C_NULL_POINTER, /**< parameter passed in is NULL */ + IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE, /**< speed mode selected is invalid */ + IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE, /**< flow mode selected is invalid */ + IX_I2C_SLAVE_ADDR_CB_MISSING, /**< slave callback is NULL */ + IX_I2C_GEN_CALL_CB_MISSING, /**< general callback is NULL */ + IX_I2C_INVALID_SLAVE_ADDR, /**< invalid slave address specified */ + IX_I2C_INT_BIND_FAIL, /**< interrupt bind fail */ + IX_I2C_INT_UNBIND_FAIL, /**< interrupt unbind fail */ + IX_I2C_NOT_INIT, /**< I2C is not initialized yet */ + IX_I2C_MASTER_BUS_BUSY, /**< master detected a I2C bus busy */ + IX_I2C_MASTER_ARB_LOSS, /**< master experienced arbitration loss */ + IX_I2C_MASTER_XFER_ERROR, /**< master experienced a transfer error */ + IX_I2C_MASTER_BUS_ERROR, /**< master detected a I2C bus error */ + IX_I2C_MASTER_NO_BUFFER, /**< no buffer provided for master transfer */ + IX_I2C_MASTER_INVALID_XFER_MODE, /**< xfer mode selected is invalid */ + IX_I2C_SLAVE_ADDR_NOT_DETECTED, /**< polled slave addr not detected */ + IX_I2C_GEN_CALL_ADDR_DETECTED, /**< polling detected general call */ + IX_I2C_SLAVE_READ_DETECTED, /**< polling detected slave read request */ + IX_I2C_SLAVE_WRITE_DETECTED, /**< polling detected slave write request */ + IX_I2C_SLAVE_NO_BUFFER, /**< no buffer provided for slave transfers */ + IX_I2C_DATA_SIZE_ZERO, /**< data size transfer is zero - invalid */ + IX_I2C_SLAVE_WRITE_BUFFER_EMPTY, /**< slave buffer is used till empty */ + IX_I2C_SLAVE_WRITE_ERROR, /**< slave write experienced an error */ + IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL, /**< slave buffer is filled up */ + IX_I2C_SLAVE_OR_GEN_READ_ERROR /**< slave read experienced an error */ +} IX_I2C_STATUS; + +/** + * @ingroup IxI2cDrv + * + * @enum IxI2cSpeedMode + * + * @brief Type of speed modes supported by the I2C hardware. + */ +typedef enum +{ + IX_I2C_NORMAL_MODE = 0x0, + IX_I2C_FAST_MODE +} IxI2cSpeedMode; + +/** + * @ingroup IxI2cDrv + * + * @enum IxI2cXferMode + * + * @brief Used for indicating it is a repeated start or normal transfer + */ +typedef enum +{ + IX_I2C_NORMAL = 0x0, + IX_I2C_REPEATED_START +} IxI2cXferMode; + +/** + * @ingroup IxI2cDrv + * + * @enum IxI2cFlowMode + * + * @brief Used for indicating it is a poll or interrupt mode + */ +typedef enum +{ + IX_I2C_POLL_MODE = 0x0, + IX_I2C_INTERRUPT_MODE +} IxI2cFlowMode; + +/** + * @ingroup IxI2cDrv + * + * @enum IxI2cDelayMode + * + * @brief Used for selecting looping delay or OS scheduler delay + */ +typedef enum +{ + IX_I2C_LOOP_DELAY = 1, /**< delay in microseconds */ + IX_I2C_SCHED_DELAY /**< delay in miliseconds */ +} IxI2cDelayMode; + +/** + * @ingroup IxI2cDrv + * + * @brief The pointer to the function that will be called when the master + * has completed its receive. The parameter that is passed will + * provide the status of the read (success, arb loss, or bus + * error), the transfer mode (normal or repeated start, the + * buffer pointer and number of bytes transferred. + */ +typedef void (*IxI2cMasterReadCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32); + +/** + * @ingroup IxI2cDrv + * + * @brief The pointer to the function that will be called when the master + * has completed its transmit. The parameter that is passed will + * provide the status of the write (success, arb loss, or buss + * error), the transfer mode (normal or repeated start), the + * buffer pointer and number of bytes transferred. + */ +typedef void (*IxI2cMasterWriteCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32); + +/** + * @ingroup IxI2cDrv + * + * @brief The pointer to the function that will be called when a slave + * address detected in interrupt mode for a read. The parameters + * that is passed will provide the read status, buffer pointer, + * buffer size, and the bytes received. When a start of a read + * is initiated there will be no buffer allocated and this callback + * will be called to request for a buffer. While receiving, if the + * buffer gets filled, this callback will be called to request for + * a new buffer while sending the filled buffer's pointer and size, + * and data size received. When the receive is complete, this + * callback will be called to process the data and free the memory + * by passing the buffer's pointer and size, and data size received. + */ +typedef void (*IxI2cSlaveReadCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32); + +/** + * @ingroup IxI2cDrv + * + * @brief The pointer to the function that will be called when a slave + * address detected in interrupt mode for a write. The parameters + * that is passed will provide the write status, buffer pointer, + * buffer size, and the bytes received. When a start of a write is + * initiated there will be no buffer allocated and this callback + * will be called to request for a buffer and to fill it with data. + * While transmitting, if the data in the buffer empties, this + * callback will be called to request for more data to be filled in + * the same or new buffer. When the transmit is complete, this + * callback will be called to free the memory or other actions to + * be taken. + */ +typedef void (*IxI2cSlaveWriteCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32); + +/** + * @ingroup IxI2cDrv + * + * @brief The pointer to the function that will be called when a general + * call detected in interrupt mode for a read. The parameters that + * is passed will provide the read status, buffer pointer, buffer + * size, and the bytes received. When a start of a read is + * initiated there will be no buffer allocated and this callback + * will be called to request for a buffer. While receiving, if the + * buffer gets filled, this callback will be called to request for + * a new buffer while sending the filled buffer's pointer and size, + * and data size received. When the receive is complete, this + * callback will be called to process the data and free the memory + * by passing the buffer's pointer and size, and data size received. + */ +typedef void (*IxI2cGenCallCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32); + +/* + * Section for struct + */ + +/** + * @brief contains all the variables required to initialize the I2C unit + * + * Structure to be filled and used for calling initialization + */ +typedef struct +{ + IxI2cSpeedMode I2cSpeedSelect; /**<Select either normal (100kbps) + or fast mode (400kbps)*/ + IxI2cFlowMode I2cFlowSelect; /**<Select interrupt or poll mode*/ + IxI2cMasterReadCallbackP MasterReadCBP; + /**<The master read callback pointer */ + IxI2cMasterWriteCallbackP MasterWriteCBP; + /**<The master write callback pointer */ + IxI2cSlaveReadCallbackP SlaveReadCBP; + /**<The slave read callback pointer */ + IxI2cSlaveWriteCallbackP SlaveWriteCBP; + /**<The slave write callback pointer */ + IxI2cGenCallCallbackP GenCallCBP; + /**<The general call callback pointer */ + BOOL I2cGenCallResponseEnable; /**<Enable/disable the unit to + respond to generall calls.*/ + BOOL I2cSlaveAddrResponseEnable;/**<Enable/disable the unit to + respond to the slave address set in + ISAR*/ + BOOL SCLEnable; /**<Enable/disable the unit from + driving the SCL line during master + mode operation*/ + UINT8 I2cHWAddr; /**<The address the unit will + response to as a slave device*/ +} IxI2cInitVars; + +/** + * @brief contains results of counters and their overflow + * + * Structure contains all values of counters and associated overflows. + */ +typedef struct +{ + UINT32 ixI2cMasterXmitCounter; /**<Total bytes transmitted as + master.*/ + UINT32 ixI2cMasterFailedXmitCounter; /**<Total bytes failed for + transmission as master.*/ + UINT32 ixI2cMasterRcvCounter; /**<Total bytes received as + master.*/ + UINT32 ixI2cMasterFailedRcvCounter; /**<Total bytes failed for + receival as master.*/ + UINT32 ixI2cSlaveXmitCounter; /**<Total bytes transmitted as + slave.*/ + UINT32 ixI2cSlaveFailedXmitCounter; /**<Total bytes failed for + transmission as slave.*/ + UINT32 ixI2cSlaveRcvCounter; /**<Total bytes received as + slave.*/ + UINT32 ixI2cSlaveFailedRcvCounter; /**<Total bytes failed for + receival as slave.*/ + UINT32 ixI2cGenAddrCallSucceedCounter; /**<Total bytes successfully + transmitted for general address.*/ + UINT32 ixI2cGenAddrCallFailedCounter; /**<Total bytes failed transmission + for general address.*/ + UINT32 ixI2cArbLossCounter; /**<Total instances of arbitration + loss has occured.*/ +} IxI2cStatsCounters; + + +/* + * Section for prototypes interface functions + */ + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvInit( + IxI2cInitVars *InitVarsSelected) + * + * @brief Initializes the I2C Driver. + * + * @param "IxI2cInitVars [in] *InitVarsSelected" - struct containing required + * variables for initialization + * + * Global Data : + * - None. + * + * This API will check if the hardware supports this I2C driver and the validity + * of the parameters passed in. It will continue to process the parameters + * passed in by setting the speed of the I2C unit (100kbps or 400kbps), setting + * the flow to either interrupt or poll mode, setting the address of the I2C unit, + * enabling/disabling the respond to General Calls, enabling/disabling the respond + * to Slave Address and SCL line driving. If it is interrupt mode, then it will + * register the callback routines for master, slavetransfer and general call receive. + * + * @return + * - IX_I2C_SUCCESS - Successfully initialize and enable the I2C + * hardware. + * - IX_I2C_NOT_SUPPORTED - The hardware does not support or have a + * dedicated I2C unit to support this driver + * - IX_I2C_NULL_POINTER - The parameter passed in is a NULL pointed + * - IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE - The speed mode selected in the + * InitVarsSelected is invalid + * - IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE - The flow mode selected in the + * InitVarsSelected is invalid + * - IX_I2C_INVALID_SLAVE_ADDR - The address 0x0 is reserved for + * general call. + * - IX_I2C_SLAVE_ADDR_CB_MISSING - interrupt mode is selected but + * slave address callback pointer is NULL + * - IX_I2C_GEN_CALL_CB_MISSING - interrupt mode is selected but + * general call callback pointer is NULL + * - IX_I2C_INT_BIND_FAIL - The ISR for the I2C failed to bind + * - IX_I2C_INT_UNBIND_FAIL - The ISR for the I2C failed to unbind + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvInit(IxI2cInitVars *InitVarsSelected); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvUninit( + void) + * + * @brief Disables the I2C hardware + * + * @param - None + * + * Global Data : + * - None. + * + * This API will disable the I2C hardware, unbind interrupt, and unmap memory. + * + * @return + * - IX_I2C_SUCCESS - successfully un-initialized I2C + * - IX_I2C_INT_UNBIND_FAIL - failed to unbind the I2C interrupt + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvUninit(void); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvSlaveAddrSet( + UINT8 SlaveAddrSet) + * + * @brief Sets the I2C Slave Address + * + * @param "UINT8 [in] SlaveAddrSet" - Slave Address to be inserted into ISAR + * + * Global Data : + * - None. + * + * This API will insert the SlaveAddrSet into the ISAR. + * + * @return + * - IX_I2C_SUCCESS - successfuly set the slave addr + * - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvSlaveAddrSet(UINT8 SlaveAddrSet); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvBusScan( + void) + * + * @brief scans the I2C bus for slave devices + * + * @param - None + * + * Global Data : + * - None. + * + * This API will prompt all slave addresses for a reply except its own + * + * @return + * - IX_I2C_SUCCESS - found at least one slave device + * - IX_I2C_FAIL - Fail to find even one slave device + * - IX_I2C_BUS_BUSY - The I2C bus is busy (held by another I2C master) + * - IX_I2C_ARB_LOSS - The I2C bus was loss to another I2C master + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvBusScan(void); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvWriteTransfer( + UINT8 SlaveAddr, + char *bufP, + UINT32 dataSize, + IxI2cXferMode XferModeSelect) + * + * @param "UINT8 [in] SlaveAddr" - The slave address to request data from. + * @param "char [in] *bufP" - The pointer to the data to be transmitted. + * @param "UINT32 [in] dataSize" - The number of bytes requested. + * @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected, + * either repeated start (ends w/o stop) or normal (start and stop) + * + * Global Data : + * - None. + * + * This API will try to obtain master control of the I2C bus and transmit the + * number of bytes, specified by dataSize, to the user specified slave + * address from the buffer pointer. It will use either interrupt or poll mode + * depending on the method selected. + * + * If in interrupt mode and IxI2cMasterWriteCallbackP is not NULL, the driver + * will initiate the transfer and return immediately. The function pointed to + * by IxI2cMasterWriteCallbackP will be called in the interrupt service + * handlers when the operation is complete. + * + * If in interrupt mode and IxI2cMasterWriteCallbackP is NULL, then the driver + * will wait for the operation to complete, and then return. + * + * And if the repeated start transfer mode is selected, then it will not send a + * stop signal at the end of all the transfers. + * *NOTE*: If repeated start transfer mode is selected, it has to end with a + * normal mode transfer mode else the bus will continue to be held + * by the IXP. + * + * @return + * - IX_I2C_SUCCESS - Successfuuly wrote data to slave. + * - IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master) + * - IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master + * - IX_I2C_MASTER_XFER_ERROR - There was a transfer error + * - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer + * - IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL + * - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid + * - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvWriteTransfer( + UINT8 SlaveAddr, + char *bufP, + UINT32 dataSize, + IxI2cXferMode XferModeSelect); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvReadTransfer( + UINT8 SlaveAddr, + char *bufP, + UINT32 dataSize, + IxI2cXferMode XferModeSelect) + * + * @brief Initiates a transfer to receive bytes of data from a slave + * device through the I2C bus. + * + * @param "UINT8 [in] SlaveAddr" - The slave address to request data from. + * @param "char [out] *bufP" - The pointer to the buffer to store the + * requested data. + * @param "UINT32 [in] dataSize" - The number of bytes requested. + * @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected, + * either repeated start (ends w/o stop) or normal (start and stop) + * + * Global Data : + * - None. + * + * This API will try to obtain master control of the I2C bus and receive the + * number of bytes, specified by dataSize, from the user specified address + * into the receive buffer. It will use either interrupt or poll mode depending + * on the mode selected. + * + * If in interrupt mode and IxI2cMasterReadCallbackP is not NULL, the driver + * will initiate the transfer and return immediately. The function pointed to + * by IxI2cMasterReadCallbackP will be called in the interrupt service + * handlers when the operation is complete. + * + * If in interrupt mode and IxI2cMasterReadCallbackP is NULL, then the driver will + * wait for the operation to complete, and then return. + * + * And if the repeated start transfer mode is selected, then it will not send a + * stop signal at the end of all the transfers. + * *NOTE*: If repeated start transfer mode is selected, it has to end with a + * normal mode transfer mode else the bus will continue to be held + * by the IXP. + * + * @return + * - IX_I2C_SUCCESS - Successfuuly read slave data + * - IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master) + * - IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master + * - IX_I2C_MASTER_XFER_ERROR - There was a bus error during transfer + * - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer + * - IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL + * - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid + * - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified + * - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvReadTransfer( + UINT8 SlaveAddr, + char *bufP, + UINT32 dataSize, + IxI2cXferMode XferModeSelect); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvSlaveAddrAndGenCallDetectedCheck( + void) + * + * @brief Checks the I2C Status Register to determine if a slave address is + * detected + * + * @param - None + * + * Global Data : + * - None. + * + * This API is used in polled mode to determine if the I2C unit is requested + * for a slave or general call transfer. If it is requested for a slave + * transfer then it will determine if it is a general call (read only), read, + * or write transfer requested. + * + * @return + * - IX_I2C_SLAVE_ADDR_NOT_DETECTED - The I2C unit is not requested for slave + * transfer + * - IX_I2C_GEN_CALL_ADDR_DETECTED - The I2C unit is not requested for slave + * transfer but for general call + * - IX_I2C_SLAVE_READ_DETECTED - The I2C unit is requested for a read + * - IX_I2C_SLAVE_WRITE_DETECTED - The I2C unit is requested for a write + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvSlaveAddrAndGenCallDetectedCheck(void); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvSlaveOrGenDataReceive( + char *bufP, + UINT32 bufSize, + UINT32 *dataSizeRcvd) + * + * @brief Performs the slave receive or general call receive data transfer + * + * @param "char [in] *bufP" - the pointer to the buffer to store data + * "UINT32 [in] bufSize" - the buffer size allocated + * "UINT32 [in] *dataSizeRcvd" - the length of data received in bytes + * + * Global Data : + * - None. + * + * This API is only used in polled mode to perform the slave read or general call + * receive data. It will continuously store the data received into bufP until + * complete or until bufP is full in which it will return + * IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL. If in interrupt mode, the callback will be + * used. + * + * @return + * - IX_I2C_SUCCESS - The I2C driver transferred the data successfully. + * - IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL - The I2C driver has ran out of + * space to store the received data. + * - IX_I2C_SLAVE_OR_GEN_READ_ERROR - The I2C driver didn't manage to + * detect the IDBR Rx Full bit + * - IX_I2C_DATA_SIZE_ZERO - bufSize passed in is zero, which is invalid + * - IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL + * - IX_I2C_NULL_POINTER - dataSizeRcvd is NULL + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvSlaveOrGenDataReceive( + char *bufP, + UINT32 bufSize, + UINT32 *dataSizeRcvd); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvSlaveDataTransmit( + char *bufP, + UINT32 dataSize, + UINT32 *dataSizeXmtd) + * + * @brief Performs the slave write data transfer + * + * @param "char [in] *bufP" - the pointer to the buffer for data to be + * transmitted + * "UINT32 [in] bufSize" - the buffer size allocated + * "UINT32 [in] *dataSizeRcvd" - the length of data trasnmitted in + * bytes + * + * Global Data : + * - None. + * + * This API is only used in polled mode to perform the slave transmit data. It + * will continuously transmit the data from bufP until complete or until bufP + * is empty in which it will return IX_I2C_SLAVE_WRITE_BUFFER_EMPTY. If in + * interrupt mode, the callback will be used. + * + * @return + * - IX_I2C_SUCCESS - The I2C driver transferred the data successfully. + * - IX_I2C_SLAVE_WRITE_BUFFER_EMPTY - The I2C driver needs more data to + * transmit. + * - IX_I2C_SLAVE_WRITE_ERROR -The I2C driver didn't manage to detect the + * IDBR Tx empty bit or the slave stop bit. + * - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid + * - IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL + * - IX_I2C_NULL_POINTER - dataSizeXmtd is NULL + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvSlaveDataTransmit( + char *bufP, + UINT32 dataSize, + UINT32 *dataSizeXmtd); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvSlaveOrGenCallBufReplenish( + char *bufP, + UINT32 bufSize) + * + * @brief Replenishes the buffer which stores buffer info for both slave and + * general call + * + * @param "char [in] *bufP" - pointer to the buffer allocated + * "UINT32 [in] bufSize" - size of the buffer + * + * Global Data : + * - None. + * + * This API is only used in interrupt mode for replenishing the same buffer + * that is used by both slave and generall call by updating the buffer info + * with new info and clearing previous offsets set by previous transfers. + * + * @return + * - None + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC void +ixI2cDrvSlaveOrGenCallBufReplenish( + char *bufP, + UINT32 bufSize); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats) + * + * @brief Returns the I2C Statistics through the pointer passed in + * + * @param - "IxI2cStatsCounters [out] *I2cStats" - I2C statistics counter will + * be read and written to the location pointed by this pointer. + * + * Global Data : + * - None. + * + * This API will return the statistics counters of the I2C driver. + * + * @return + * - IX_I2C_NULL_POINTER - pointer passed in is NULL + * - IX_I2C_SUCCESS - successfully obtained I2C statistics + * + * @li Reentrant : yes + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvStatsReset(void) + * + * @brief Reset I2C statistics counters. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will reset the statistics counters of the I2C driver. + * + * @return + * - None + * + * @li Reentrant : yes + * @li ISR Callable : no + * + */ +PUBLIC void +ixI2cDrvStatsReset(void); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvShow(void) + * + * @brief Displays the I2C status register and the statistics counter. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will display the I2C Status register and is useful if any error + * occurs. It displays the detection of bus error, slave address, general call, + * address, IDBR receive full, IDBR transmit empty, arbitration loss, slave + * STOP signal, I2C bus busy, unit busy, ack/nack, and read/write mode. It will + * also call the ixI2cDrvGetStats and then display the statistics counter. + * + * @return + * - IX_I2C_SUCCESS - successfully displayed statistics and status register + * - IX_I2C_NOT_INIT - I2C not init yet. + * + * @li Reentrant : yes + * @li ISR Callable : no + * + */ +PUBLIC IX_I2C_STATUS +ixI2cDrvShow(void); + +/** + * @ingroup IxI2cDrv + * + * @fn ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayMechanismSelect) + * + * @brief Sets the delay type of either looping delay or OS scheduler delay + * according to the argument provided. + * + * @param - "IxI2cDelayMode [in] delayTypeSelect" - the I2C delay type selected + * + * Global Data : + * - None. + * + * This API will set the delay type used by the I2C Driver to either looping + * delay or OS scheduler delay. + * + * @return + * - None + * + * @li Reentrant : yes + * @li ISR Callable : no + * + */ +PUBLIC void +ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayTypeSelect); + +#endif /* __ixp46X */ +#endif /* IXI2CDRV_H */ diff --git a/drivers/net/npe/include/IxNpeA.h b/drivers/net/npe/include/IxNpeA.h new file mode 100644 index 0000000000..90669c27e7 --- /dev/null +++ b/drivers/net/npe/include/IxNpeA.h @@ -0,0 +1,782 @@ +#ifndef __doxygen_HIDE /* This file is not part of the API */ + +/** + * @file IxNpeA.h + * + * @date 22-Mar-2002 + * + * @brief Header file for the IXP400 ATM NPE API + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxNpeA IXP400 NPE-A (IxNpeA) API + * + * @brief The Public API for the IXP400 NPE-A + * + * @{ + */ + +#ifndef IX_NPE_A_H +#define IX_NPE_A_H + +#include "IxQMgr.h" +#include "IxOsal.h" +#include "IxQueueAssignments.h" + +/* General Message Ids */ + +/* ATM Message Ids */ + +/** + * @def IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_WRITE + * + * @brief ATM Message ID command to write the data to the offset in the + * Utopia Configuration Table + */ +#define IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_WRITE 0x20 + +/** + * @def IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_LOAD + * + * @brief ATM Message ID command triggers the NPE to copy the Utopia + * Configuration Table to the Utopia coprocessor + */ +#define IX_NPE_A_MSSG_ATM_UTOPIA_CONFIG_LOAD 0x21 + +/** + * @def IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_UPLOAD + * + * @brief ATM Message ID command triggers the NPE to read-back the Utopia + * status registers and update the Utopia Status Table. + */ +#define IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_UPLOAD 0x22 + +/** + * @def IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_READ + * + * @brief ATM Message ID command to read the Utopia Status Table at the + * specified offset. + */ +#define IX_NPE_A_MSSG_ATM_UTOPIA_STATUS_READ 0x23 + +/** + * @def IX_NPE_A_MSSG_ATM_TX_ENABLE + * + * @brief ATM Message ID command triggers the NPE to re-enable processing + * of any entries on the TxVcQ for this port. + * + * This command will be ignored for a port already enabled + */ +#define IX_NPE_A_MSSG_ATM_TX_ENABLE 0x25 + + /** + * @def IX_NPE_A_MSSG_ATM_TX_DISABLE + * + * @brief ATM Message ID command triggers the NPE to disable processing on + * this port + * + * This command will be ignored for a port already disabled + */ +#define IX_NPE_A_MSSG_ATM_TX_DISABLE 0x26 + +/** + * @def IX_NPE_A_MSSG_ATM_RX_ENABLE + * + * @brief ATM Message ID command triggers the NPE to process any received + * cells for this VC according to the VC Lookup Table. + * + * Re-issuing this command with different contents for a VC that is not + * disabled will cause unpredictable behavior. + */ +#define IX_NPE_A_MSSG_ATM_RX_ENABLE 0x27 + +/** + * @def IX_NPE_A_MSSG_ATM_RX_DISABLE + * + * @brief ATM Message ID command triggers the NPE to disable processing for + * this VC. + * + * This command will be ignored for a VC already disabled + */ +#define IX_NPE_A_MSSG_ATM_RX_DISABLE 0x28 + +/** + * @def IX_NPE_A_MSSG_ATM_STATUS_READ + * + * @brief ATM Message ID command to read the ATM status. The data is returned via + * a response message + */ +#define IX_NPE_A_MSSG_ATM_STATUS_READ 0x29 + +/*-------------------------------------------------------------------------- + * HSS Message IDs + *--------------------------------------------------------------------------*/ + +/** + * @def IX_NPE_A_MSSG_HSS_PORT_CONFIG_WRITE + * + * @brief HSS Message ID command writes the ConfigWord value to the location + * in the HSS_CONFIG_TABLE specified by offset for HSS port hPort. + */ +#define IX_NPE_A_MSSG_HSS_PORT_CONFIG_WRITE 0x40 + +/** + * @def IX_NPE_A_MSSG_HSS_PORT_CONFIG_LOAD + * + * @brief HSS Message ID command triggers the NPE to copy the contents of the + * HSS Configuration Table to the appropriate configuration registers in the + * HSS coprocessor for the port specified by hPort. + */ +#define IX_NPE_A_MSSG_HSS_PORT_CONFIG_LOAD 0x41 + +/** + * @def IX_NPE_A_MSSG_HSS_PORT_ERROR_READ + * + * @brief HSS Message ID command triggers the NPE to return an HssErrorReadResponse + * message for HSS port hPort. + */ +#define IX_NPE_A_MSSG_HSS_PORT_ERROR_READ 0x42 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_FLOW_ENABLE + * + * @brief HSS Message ID command triggers the NPE to reset internal status and + * enable the HssChannelized operation on the HSS port specified by hPort. + */ +#define IX_NPE_A_MSSG_HSS_CHAN_FLOW_ENABLE 0x43 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_FLOW_DISABLE + * + * @brief HSS Message ID command triggers the NPE to disable the HssChannelized + * operation on the HSS port specified by hPort. + */ +#define IX_NPE_A_MSSG_HSS_CHAN_FLOW_DISABLE 0x44 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_IDLE_PATTERN_WRITE + * + * @brief HSS Message ID command writes the HSSnC_IDLE_PATTERN value for HSS + * port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_IDLE_PATTERN_WRITE 0x45 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_NUM_CHANS_WRITE + * + * @brief HSS Message ID command writes the HSSnC_NUM_CHANNELS value for HSS + * port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_NUM_CHANS_WRITE 0x46 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_ADDR_WRITE + * + * @brief HSS Message ID command writes the HSSnC_RX_BUF_ADDR value for HSS + * port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_ADDR_WRITE 0x47 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_CFG_WRITE + * + * @brief HSS Message ID command writes the HSSnC_RX_BUF_SIZEB and + * HSSnC_RX_TRIG_PERIOD values for HSS port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_RX_BUF_CFG_WRITE 0x48 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_TX_BLK_CFG_WRITE + * + * @brief HSS Message ID command writes the HSSnC_TX_BLK1_SIZEB, + * HSSnC_TX_BLK1_SIZEW, HSSnC_TX_BLK2_SIZEB, and HSSnC_TX_BLK2_SIZEW values + * for HSS port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_TX_BLK_CFG_WRITE 0x49 + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_ADDR_WRITE + * @brief HSS Message ID command writes the HSSnC_TX_BUF_ADDR value for HSS + * port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_ADDR_WRITE 0x4A + +/** + * @def IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_SIZE_WRITE + * + * @brief HSS Message ID command writes the HSSnC_TX_BUF_SIZEN value for HSS + * port hPort. (n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_CHAN_TX_BUF_SIZE_WRITE 0x4B + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_ENABLE + * + * @brief HSS Message ID command triggers the NPE to reset internal status and + * enable the HssPacketized operation for the flow specified by pPipe on + * the HSS port specified by hPort. + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_ENABLE 0x50 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_DISABLE + * @brief HSS Message ID command triggers the NPE to disable the HssPacketized + * operation for the flow specified by pPipe on the HSS port specified by hPort. + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_FLOW_DISABLE 0x51 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_NUM_PIPES_WRITE + * @brief HSS Message ID command writes the HSSnP_NUM_PIPES value for HSS + * port hPort.(n=hPort) + */ +#define IX_NPE_A_MSSG_HSS_PKT_NUM_PIPES_WRITE 0x52 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_FIFO_SIZEW_WRITE + * + * @brief HSS Message ID command writes the HSSnP_PIPEp_FIFOSIZEW value for + * packet-pipe pPipe on HSS port hPort. (n=hPort, p=pPipe) + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_FIFO_SIZEW_WRITE 0x53 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_HDLC_CFG_WRITE + * + * @brief HSS Message ID command writes the HSSnP_PIPEp_HDLC_RXCFG and + * HSSnP_PIPEp_HDLC_TXCFG values for packet-pipe pPipe on HSS port hPort. + * (n=hPort, p=pPipe) + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_HDLC_CFG_WRITE 0x54 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_IDLE_PATTERN_WRITE + * + * @brief HSS Message ID command writes the HSSnP_PIPEp_IDLE_PATTERN value + * for packet-pipe pPipe on HSS port hPort. (n=hPort, p=pPipe) + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_IDLE_PATTERN_WRITE 0x55 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_RX_SIZE_WRITE + * + * @brief HSS Message ID command writes the HSSnP_PIPEp_RXSIZEB value for + * packet-pipe pPipe on HSS port hPort. (n=hPort, p=pPipe) + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_RX_SIZE_WRITE 0x56 + +/** + * @def IX_NPE_A_MSSG_HSS_PKT_PIPE_MODE_WRITE + * + * @brief HSS Message ID command writes the HSSnP_PIPEp_MODE value for + * packet-pipe pPipe on HSS port hPort. (n=hPort, p=pPipe) + */ +#define IX_NPE_A_MSSG_HSS_PKT_PIPE_MODE_WRITE 0x57 + + + +/* Queue Entry Masks */ + +/*-------------------------------------------------------------------------- + * ATM Descriptor Structure offsets + *--------------------------------------------------------------------------*/ + +/** + * @def IX_NPE_A_RXDESCRIPTOR_STATUS_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Status field + * + * It is used for descriptor error reporting. + */ +#define IX_NPE_A_RXDESCRIPTOR_STATUS_OFFSET 0 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_VCID_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor VC ID field + * + * It is used to hold an identifier number for this VC + */ +#define IX_NPE_A_RXDESCRIPTOR_VCID_OFFSET 1 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_CURRMBUFSIZE_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Current Mbuf + * Size field + * + * Number of bytes the current mbuf data buffer can hold + */ +#define IX_NPE_A_RXDESCRIPTOR_CURRMBUFSIZE_OFFSET 2 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_ATMHEADER_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor ATM Header + */ +#define IX_NPE_A_RXDESCRIPTOR_ATMHEADER_OFFSET 4 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_CURRMBUFLEN_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Current MBuf length + * + * + * RX - Initialized to zero. The NPE updates this field as each cell is received and + * zeroes it with every new mbuf for chaining. Will not be bigger than currBbufSize. + */ +#define IX_NPE_A_RXDESCRIPTOR_CURRMBUFLEN_OFFSET 12 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_TIMELIMIT__OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Time Limit field + * + * Contains the Payload Reassembly Time Limit (used for aal0_xx only) + */ +#define IX_NPE_A_RXDESCRIPTOR_TIMELIMIT_OFFSET 14 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_PCURRMBUFF_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Current MBuf Pointer + * + * The current mbuf pointer of a chain of mbufs. + */ +#define IX_NPE_A_RXDESCRIPTOR_PCURRMBUFF_OFFSET 20 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_PCURRMBUFDATA_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Current MBuf Pointer + * + * Pointer to the next byte to be read or next free location to be written. + */ +#define IX_NPE_A_RXDESCRIPTOR_PCURRMBUFDATA_OFFSET 24 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_PNEXTMBUF_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Next MBuf Pointer + * + * Pointer to the next MBuf in a chain of MBufs. + */ +#define IX_NPE_A_RXDESCRIPTOR_PNEXTMBUF_OFFSET 28 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_TOTALLENGTH_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor Total Length + * + * Total number of bytes written to the chain of MBufs by the NPE + */ +#define IX_NPE_A_RXDESCRIPTOR_TOTALLENGTH_OFFSET 32 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET + * + * @brief ATM Descriptor structure offset for Receive Descriptor AAL5 CRC Residue + * + * Current CRC value for a PDU + */ +#define IX_NPE_A_RXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET 36 + +/** + * @def IX_NPE_A_RXDESCRIPTOR_SIZE + * + * @brief ATM Descriptor structure offset for Receive Descriptor Size + * + * The size of the Receive descriptor + */ +#define IX_NPE_A_RXDESCRIPTOR_SIZE 40 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_PORT_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Port + * + * Port identifier. + */ +#define IX_NPE_A_TXDESCRIPTOR_PORT_OFFSET 0 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_RSVD_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor RSVD + */ +#define IX_NPE_A_TXDESCRIPTOR_RSVD_OFFSET 1 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_CURRMBUFLEN_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Current MBuf Length + * + * TX - Initialized by the XScale to the number of bytes in the current MBuf data buffer. + * The NPE decrements this field for every transmitted cell. Thus, when the NPE writes a + * descriptor the TxDone queue, this field will equal zero. + */ +#define IX_NPE_A_TXDESCRIPTOR_CURRMBUFLEN_OFFSET 2 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_ATMHEADER_OFFSET + * @brief ATM Descriptor structure offset for Transmit Descriptor ATM Header + */ +#define IX_NPE_A_TXDESCRIPTOR_ATMHEADER_OFFSET 4 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_PCURRMBUFF_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Pointer to the current MBuf chain + */ +#define IX_NPE_A_TXDESCRIPTOR_PCURRMBUFF_OFFSET 8 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_PCURRMBUFDATA_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Pointer to the current MBuf Data + * + * Pointer to the next byte to be read or next free location to be written. + */ +#define IX_NPE_A_TXDESCRIPTOR_PCURRMBUFDATA_OFFSET 12 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_PNEXTMBUF_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Pointer to the Next MBuf chain + */ +#define IX_NPE_A_TXDESCRIPTOR_PNEXTMBUF_OFFSET 16 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_TOTALLENGTH_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Total Length + * + * Total number of bytes written to the chain of MBufs by the NPE + */ +#define IX_NPE_A_TXDESCRIPTOR_TOTALLENGTH_OFFSET 20 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET + * + * @brief ATM Descriptor structure offset for Transmit Descriptor AAL5 CRC Residue + * + * Current CRC value for a PDU + */ +#define IX_NPE_A_TXDESCRIPTOR_AAL5CRCRESIDUE_OFFSET 24 + +/** + * @def IX_NPE_A_TXDESCRIPTOR_SIZE + * + * @brief ATM Descriptor structure offset for Transmit Descriptor Size + */ +#define IX_NPE_A_TXDESCRIPTOR_SIZE 28 + +/** + * @def IX_NPE_A_CHAIN_DESC_COUNT_MAX + * + * @brief Maximum number of chained MBufs that can be chained together + */ +#define IX_NPE_A_CHAIN_DESC_COUNT_MAX 256 + +/* + * Definition of the ATM cell header + * + * This would most conviently be defined as the bit field shown below. + * Endian portability prevents this, therefore a set of macros + * are defined to access the fields within the cell header assumed to + * be passed as a UINT32. + * + * Changes to field sizes or orders must be reflected in the offset + * definitions above. + * + * typedef struct + * { + * unsigned int gfc:4; + * unsigned int vpi:8; + * unsigned int vci:16; + * unsigned int pti:3; + * unsigned int clp:1; + * } IxNpeA_AtmCellHeader; + * + */ + +/** Mask to acess GFC */ +#define GFC_MASK 0xf0000000 + +/** return GFC from ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_GFC_GET( header ) \ +(((header) & GFC_MASK) >> 28) + +/** set GFC into ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_GFC_SET( header,gfc ) \ +do { \ + (header) &= ~GFC_MASK; \ + (header) |= (((gfc) << 28) & GFC_MASK); \ +} while(0) + +/** Mask to acess VPI */ +#define VPI_MASK 0x0ff00000 + +/** return VPI from ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_VPI_GET( header ) \ +(((header) & VPI_MASK) >> 20) + +/** set VPI into ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_VPI_SET( header, vpi ) \ +do { \ + (header) &= ~VPI_MASK; \ + (header) |= (((vpi) << 20) & VPI_MASK); \ +} while(0) + +/** Mask to acess VCI */ +#define VCI_MASK 0x000ffff0 + +/** return VCI from ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_VCI_GET( header ) \ +(((header) & VCI_MASK) >> 4) + +/** set VCI into ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_VCI_SET( header, vci ) \ +do { \ + (header) &= ~VCI_MASK; \ + (header) |= (((vci) << 4) & VCI_MASK); \ +} while(0) + +/** Mask to acess PTI */ +#define PTI_MASK 0x0000000e + +/** return PTI from ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_PTI_GET( header ) \ +(((header) & PTI_MASK) >> 1) + +/** set PTI into ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_PTI_SET( header, pti ) \ +do { \ + (header) &= ~PTI_MASK; \ + (header) |= (((pti) << 1) & PTI_MASK); \ +} while(0) + +/** Mask to acess CLP */ +#define CLP_MASK 0x00000001 + +/** return CLP from ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_CLP_GET( header ) \ +((header) & CLP_MASK) + +/** set CLP into ATM cell header */ +#define IX_NPE_A_ATMCELLHEADER_CLP_SET( header, clp ) \ +do { \ + (header) &= ~CLP_MASK; \ + (header) |= ((clp) & CLP_MASK); \ +} while(0) + + +/* +* Definition of the Rx bitfield +* +* This would most conviently be defined as the bit field shown below. +* Endian portability prevents this, therefore a set of macros +* are defined to access the fields within the rxBitfield assumed to +* be passed as a UINT32. +* +* Changes to field sizes or orders must be reflected in the offset +* definitions above. +* +* Rx bitfield +* struct +* { IX_NPEA_RXBITFIELD( +* unsigned int status:1, +* unsigned int port:7, +* unsigned int vcId:8, +* unsigned int currMbufSize:16); +* } rxBitField; +* +*/ + +/** Mask to acess the rxBitField status */ +#define STATUS_MASK 0x80000000 + +/** return the rxBitField status */ +#define IX_NPE_A_RXBITFIELD_STATUS_GET( rxbitfield ) \ +(((rxbitfield) & STATUS_MASK) >> 31) + +/** set the rxBitField status */ +#define IX_NPE_A_RXBITFIELD_STATUS_SET( rxbitfield, status ) \ +do { \ + (rxbitfield) &= ~STATUS_MASK; \ + (rxbitfield) |= (((status) << 31) & STATUS_MASK); \ +} while(0) + +/** Mask to acess the rxBitField port */ +#define PORT_MASK 0x7f000000 + +/** return the rxBitField port */ +#define IX_NPE_A_RXBITFIELD_PORT_GET( rxbitfield ) \ +(((rxbitfield) & PORT_MASK) >> 24) + +/** set the rxBitField port */ +#define IX_NPE_A_RXBITFIELD_PORT_SET( rxbitfield, port ) \ +do { \ + (rxbitfield) &= ~PORT_MASK; \ + (rxbitfield) |= (((port) << 24) & PORT_MASK); \ +} while(0) + +/** Mask to acess the rxBitField vcId */ +#define VCID_MASK 0x00ff0000 + +/** return the rxBitField vcId */ +#define IX_NPE_A_RXBITFIELD_VCID_GET( rxbitfield ) \ +(((rxbitfield) & VCID_MASK) >> 16) + +/** set the rxBitField vcId */ +#define IX_NPE_A_RXBITFIELD_VCID_SET( rxbitfield, vcid ) \ +do { \ + (rxbitfield) &= ~VCID_MASK; \ + (rxbitfield) |= (((vcid) << 16) & VCID_MASK); \ +} while(0) + +/** Mask to acess the rxBitField mbuf size */ +#define CURRMBUFSIZE_MASK 0x0000ffff + +/** return the rxBitField mbuf size */ +#define IX_NPE_A_RXBITFIELD_CURRMBUFSIZE_GET( rxbitfield ) \ +((rxbitfield) & CURRMBUFSIZE_MASK) + +/** set the rxBitField mbuf size */ +#define IX_NPE_A_RXBITFIELD_CURRMBUFSIZE_SET( rxbitfield, currmbufsize ) \ +do { \ + (rxbitfield) &= ~CURRMBUFSIZE_MASK; \ + (rxbitfield) |= ((currmbufsize) & CURRMBUFSIZE_MASK); \ +} while(0) + + + +/** + * @brief Tx Descriptor definition + */ +typedef struct +{ + UINT8 port; /**< Tx Port number */ + UINT8 aalType; /**< AAL Type */ + UINT16 currMbufLen; /**< mbuf length */ + UINT32 atmCellHeader; /**< ATM cell header */ + IX_OSAL_MBUF *pCurrMbuf; /**< pointer to mbuf */ + unsigned char *pCurrMbufData; /**< Pointer to mbuf->dat */ + IX_OSAL_MBUF *pNextMbuf; /**< Pointer to next mbuf */ + UINT32 totalLen; /**< Total Length */ + UINT32 aal5CrcResidue; /**< AAL5 CRC Residue */ +} IxNpeA_TxAtmVc; + +/* Changes to field sizes or orders must be reflected in the offset + * definitions above. */ + + + + +/** + * @brief Rx Descriptor definition + */ +typedef struct +{ + UINT32 rxBitField; /**< Received bit field */ + UINT32 atmCellHeader; /**< ATM Cell Header */ + UINT32 rsvdWord0; /**< Reserved field */ + UINT16 currMbufLen; /**< Mbuf Length */ + UINT8 timeLimit; /**< Payload Reassembly timeLimit (used for aal0_xx only) */ + UINT8 rsvdByte0; /**< Reserved field */ + UINT32 rsvdWord1; /**< Reserved field */ + IX_OSAL_MBUF *pCurrMbuf; /**< Pointer to current mbuf */ + unsigned char *pCurrMbufData; /**< Pointer to current mbuf->data */ + IX_OSAL_MBUF *pNextMbuf; /**< Pointer to next mbuf */ + UINT32 totalLen; /**< Total Length */ + UINT32 aal5CrcResidue; /**< AAL5 CRC Residue */ +} IxNpeA_RxAtmVc; + + +/** + * @brief NPE-A AAL Type + */ +typedef enum +{ + IX_NPE_A_AAL_TYPE_INVALID = 0, /**< Invalid AAL type */ + IX_NPE_A_AAL_TYPE_0_48 = 0x1, /**< AAL0 - 48 byte */ + IX_NPE_A_AAL_TYPE_0_52 = 0x2, /**< AAL0 - 52 byte */ + IX_NPE_A_AAL_TYPE_5 = 0x5, /**< AAL5 */ + IX_NPE_A_AAL_TYPE_OAM = 0xF /**< OAM */ +} IxNpeA_AalType; + +/** + * @brief NPE-A Payload format 52-bytes & 48-bytes + */ +typedef enum +{ + IX_NPE_A_52_BYTE_PAYLOAD = 0, /**< 52 byte payload */ + IX_NPE_A_48_BYTE_PAYLOAD /**< 48 byte payload */ +} IxNpeA_PayloadFormat; + +/** + * @brief HSS Packetized NpePacket Descriptor Structure + */ +typedef struct +{ + UINT8 status; /**< Status of the packet passed to the client */ + UINT8 errorCount; /**< Number of errors */ + UINT8 chainCount; /**< Mbuf chain count e.g. 0 - No mbuf chain */ + UINT8 rsvdByte0; /**< Reserved byte to make the descriptor word align */ + + UINT16 packetLength; /**< Packet Length */ + UINT16 rsvdShort0; /**< Reserved short to make the descriptor a word align */ + + IX_OSAL_MBUF *pRootMbuf; /**< Pointer to Root mbuf */ + IX_OSAL_MBUF *pNextMbuf; /**< Pointer to next mbuf */ + UINT8 *pMbufData; /**< Pointer to the current mbuf->data */ + UINT32 mbufLength; /**< Current mbuf length */ + +} IxNpeA_NpePacketDescriptor; + + +#endif +/** + *@} + */ + +#endif /* __doxygen_HIDE */ diff --git a/drivers/net/npe/include/IxNpeDl.h b/drivers/net/npe/include/IxNpeDl.h new file mode 100644 index 0000000000..86f69f4144 --- /dev/null +++ b/drivers/net/npe/include/IxNpeDl.h @@ -0,0 +1,980 @@ +/** + * @file IxNpeDl.h + * + * @date 14 December 2001 + + * @brief This file contains the public API of the IXP400 NPE Downloader + * component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeDl IXP400 NPE-Downloader (IxNpeDl) API + * + * @brief The Public API for the IXP400 NPE Downloader + * + * @{ + */ + +#ifndef IXNPEDL_H +#define IXNPEDL_H + +/* + * Put the user defined include files required + */ +#include "IxOsalTypes.h" +#include "IxNpeMicrocode.h" + +/* + * #defines for function return types, etc. + */ + +/** + * @def IX_NPEDL_PARAM_ERR + * + * @brief NpeDl function return value for a parameter error + */ +#define IX_NPEDL_PARAM_ERR 2 + +/** + * @def IX_NPEDL_RESOURCE_ERR + * + * @brief NpeDl function return value for a resource error + */ +#define IX_NPEDL_RESOURCE_ERR 3 + +/** + * @def IX_NPEDL_CRITICAL_NPE_ERR + * + * @brief NpeDl function return value for a Critical NPE error occuring during + download. Assume NPE is left in unstable condition if this value is + returned or NPE is hang / halt. + */ +#define IX_NPEDL_CRITICAL_NPE_ERR 4 + +/** + * @def IX_NPEDL_CRITICAL_MICROCODE_ERR + * + * @brief NpeDl function return value for a Critical Microcode error + * discovered during download. Assume NPE is left in unstable condition + * if this value is returned. + */ +#define IX_NPEDL_CRITICAL_MICROCODE_ERR 5 + +/** + * @def IX_NPEDL_DEVICE_ERR + * + * @brief NpeDl function return value when image being downloaded + * is not meant for the device in use + */ +#define IX_NPEDL_DEVICE_ERR 6 + +/** + * @defgroup NPEImageID IXP400 NPE Image ID Definition + * + * @ingroup IxNpeDl + * + * @brief Definition of NPE Image ID to be passed to ixNpeDlNpeInitAndStart() + * as input of type UINT32 which has the following fields format: + * + * Field [Bit Location] <BR> + * -------------------- <BR> + * Device ID [31 - 28] <BR> + * NPE ID [27 - 24] <BR> + * NPE Functionality ID [23 - 16] <BR> + * Major Release Number [15 - 8] <BR> + * Minor Release Number [7 - 0] <BR> + * + * + * @{ + */ + +/** + * @def IX_NPEDL_NPEIMAGE_FIELD_MASK + * + * @brief Mask for NPE Image ID's Field + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IX_NPEDL_NPEIMAGE_FIELD_MASK 0xff + +/** + * @def IX_NPEDL_NPEIMAGE_NPEID_MASK + * + * @brief Mask for NPE Image NPE ID's Field + * + */ +#define IX_NPEDL_NPEIMAGE_NPEID_MASK 0xf + +/** + * @def IX_NPEDL_NPEIMAGE_DEVICEID_MASK + * + * @brief Mask for NPE Image Device ID's Field + * + */ +#define IX_NPEDL_NPEIMAGE_DEVICEID_MASK 0xf + +/** + * @def IX_NPEDL_NPEIMAGE_BIT_LOC_NPEID + * + * @brief Location of NPE ID field in term of bit. + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IX_NPEDL_NPEIMAGE_BIT_LOC_NPEID 24 + +/** + * @def IX_NPEDL_NPEIMAGE_BIT_LOC_FUNCTIONALITYID + * + * @brief Location of Functionality ID field in term of bit. + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IX_NPEDL_NPEIMAGE_BIT_LOC_FUNCTIONALITYID 16 + +/** + * @def IX_NPEDL_NPEIMAGE_BIT_LOC_MAJOR + * + * @brief Location of Major Release Number field in term of bit. + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IX_NPEDL_NPEIMAGE_BIT_LOC_MAJOR 8 + +/** + * @def IX_NPEDL_NPEIMAGE_BIT_LOC_MINOR + * + * @brief Location of Minor Release Number field in term of bit. + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IX_NPEDL_NPEIMAGE_BIT_LOC_MINOR 0 + +/** + * @} addtogroup NPEImageID + */ + +/** + * @def ixNpeDlMicrocodeImageOverride(x) + * + * @brief Map old terminology that uses term "image" to new term + * "image library" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define ixNpeDlMicrocodeImageOverride(x) ixNpeDlMicrocodeImageLibraryOverride(x) + +/** + * @def IxNpeDlVersionId + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IxNpeDlVersionId IxNpeDlImageId + +/** + * @def ixNpeDlVersionDownload + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define ixNpeDlVersionDownload(x,y) ixNpeDlImageDownload(x,y) + +/** + * @def ixNpeDlAvailableVersionsCountGet + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define ixNpeDlAvailableVersionsCountGet(x) ixNpeDlAvailableImagesCountGet(x) + +/** + * @def ixNpeDlAvailableVersionsListGet + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define ixNpeDlAvailableVersionsListGet(x,y) ixNpeDlAvailableImagesListGet(x,y) + + /** + * @def ixNpeDlLoadedVersionGet + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define ixNpeDlLoadedVersionGet(x,y) ixNpeDlLoadedImageGet(x,y) + + /** + * @def clientImage + * + * @brief Map old terminology that uses term "image" to new term + * "image library" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define clientImage clientImageLibrary + + /** + * @def versionIdPtr + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define versionIdPtr imageIdPtr + + /** + * @def numVersionsPtr + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define numVersionsPtr numImagesPtr + +/** + * @def versionIdListPtr + * + * @brief Map old terminology that uses term "version" to new term + * "image" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define versionIdListPtr imageIdListPtr + +/** + * @def IxNpeDlBuildId + * + * @brief Map old terminology that uses term "buildId" to new term + * "functionalityId" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IxNpeDlBuildId IxNpeDlFunctionalityId + +/** + * @def buildId + * + * @brief Map old terminology that uses term "buildId" to new term + * "functionalityId" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define buildId functionalityId + +/** + * @def IX_NPEDL_MicrocodeImage + * + * @brief Map old terminology that uses term "image" to new term + * "image library" + * + * @warning <b>THIS #define HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +#define IX_NPEDL_MicrocodeImage IX_NPEDL_MicrocodeImageLibrary + +/* + * Typedefs + */ + +/** + * @typedef IxNpeDlFunctionalityId + * @brief Used to make up Functionality ID field of Image Id + * + * @warning <b>THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +typedef UINT8 IxNpeDlFunctionalityId; + +/** + * @typedef IxNpeDlMajor + * @brief Used to make up Major Release field of Image Id + * + * @warning <b>THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +typedef UINT8 IxNpeDlMajor; + +/** + * @typedef IxNpeDlMinor + * @brief Used to make up Minor Revision field of Image Id + * + * @warning <b>THIS typedef HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +typedef UINT8 IxNpeDlMinor; + +/* + * Enums + */ + +/** + * @brief NpeId numbers to identify NPE A, B or C + * @note In this context, for IXP425 Silicon (B0):<br> + * - NPE-A has HDLC, HSS, AAL and UTOPIA Coprocessors.<br> + * - NPE-B has Ethernet Coprocessor.<br> + * - NPE-C has Ethernet, AES, DES and HASH Coprocessors.<br> + * - IXP400 Product Line have different combinations of coprocessors. + */ +typedef enum +{ + IX_NPEDL_NPEID_NPEA = 0, /**< Identifies NPE A */ + IX_NPEDL_NPEID_NPEB, /**< Identifies NPE B */ + IX_NPEDL_NPEID_NPEC, /**< Identifies NPE C */ + IX_NPEDL_NPEID_MAX /**< Total Number of NPEs */ +} IxNpeDlNpeId; + +/* + * Structs + */ + +/** + * @brief Image Id to identify each image contained in an image library + * + * @warning <b>THIS struct HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart for more information. + */ +typedef struct +{ + IxNpeDlNpeId npeId; /**< NPE ID */ + IxNpeDlFunctionalityId functionalityId; /**< Build ID indicates functionality of image */ + IxNpeDlMajor major; /**< Major Release Number */ + IxNpeDlMinor minor; /**< Minor Revision Number */ +} IxNpeDlImageId; + +/* + * Prototypes for interface functions + */ + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlNpeInitAndStart (UINT32 imageId) + * + * @brief Stop, reset, download microcode (firmware) and finally start NPE. + * + * @param imageId UINT32 [in] - Id of the microcode image to download. + * + * This function locates the image specified by the <i>imageId</i> parameter + * from the default microcode image library which is included internally by + * this component. + * It then stops and resets the NPE, loads the firmware image onto the NPE, + * and then restarts the NPE. + * + * @note A list of valid image IDs is included in this header file. + * See #defines with prefix IX_NPEDL_NPEIMAGE_... + * + * @note This function, along with @ref ixNpeDlCustomImageNpeInitAndStart + * and @ref ixNpeDlLoadedImageFunctionalityGet, supercedes the following + * functions which are deprecated and will be removed completely in a + * future release: + * - @ref ixNpeDlImageDownload + * - @ref ixNpeDlAvailableImagesCountGet + * - @ref ixNpeDlAvailableImagesListGet + * - @ref ixNpeDlLatestImageGet + * - @ref ixNpeDlLoadedImageGet + * - @ref ixNpeDlMicrocodeImageLibraryOverride + * - @ref ixNpeDlNpeExecutionStop + * - @ref ixNpeDlNpeStopAndReset + * - @ref ixNpeDlNpeExecutionStart + * + * @pre + * - The Client is responsible for ensuring mutual access to the NPE. + * @post + * - The NPE Instruction Pipeline will be cleared if State Information + * has been downloaded. + * - If the download fails with a critical error, the NPE may + * be left in an ususable state. + * @return + * - IX_SUCCESS if the download was successful; + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during + * download + * - IX_NPEDL_CRITICAL_MICROCODE_ERR if a critical microcode error + * occured during download + * - IX_NPEDL_DEVICE_ERR if the image being loaded is not meant for + * the device currently running. + * - IX_FAIL if NPE is not available or image is failed to be located. + * A warning is issued if the NPE is not present. + */ +PUBLIC IX_STATUS +ixNpeDlNpeInitAndStart (UINT32 npeImageId); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary, + UINT32 imageId) + * + * @brief Stop, reset, download microcode (firmware) and finally start NPE + * + * @param imageId UINT32 [in] - Id of the microcode image to download. + * + * This function locates the image specified by the <i>imageId</i> parameter + * from the specified microcode image library which is pointed to by the + * <i>imageLibrary</i> parameter. + * It then stops and resets the NPE, loads the firmware image onto the NPE, + * and then restarts the NPE. + * + * This is a facility for users who wish to use an image from an external + * library of NPE firmware images. To use a standard image from the + * built-in library, see @ref ixNpeDlNpeInitAndStart instead. + * + * @note A list of valid image IDs is included in this header file. + * See #defines with prefix IX_NPEDL_NPEIMAGE_... + * + * @note This function, along with @ref ixNpeDlNpeInitAndStart + * and @ref ixNpeDlLoadedImageFunctionalityGet, supercedes the following + * functions which are deprecated and will be removed completely in a + * future release: + * - @ref ixNpeDlImageDownload + * - @ref ixNpeDlAvailableImagesCountGet + * - @ref ixNpeDlAvailableImagesListGet + * - @ref ixNpeDlLatestImageGet + * - @ref ixNpeDlLoadedImageGet + * - @ref ixNpeDlMicrocodeImageLibraryOverride + * - @ref ixNpeDlNpeExecutionStop + * - @ref ixNpeDlNpeStopAndReset + * - @ref ixNpeDlNpeExecutionStart + * + * @pre + * - The Client is responsible for ensuring mutual access to the NPE. + * - The image library supplied must be in the correct format for use + * by the NPE Downloader (IxNpeDl) component. Details of the library + * format are contained in the Functional Specification document for + * IxNpeDl. + * @post + * - The NPE Instruction Pipeline will be cleared if State Information + * has been downloaded. + * - If the download fails with a critical error, the NPE may + * be left in an ususable state. + * @return + * - IX_SUCCESS if the download was successful; + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during + * download + * - IX_NPEDL_CRITICAL_MICROCODE_ERR if a critical microcode error + * occured during download + * - IX_NPEDL_DEVICE_ERR if the image being loaded is not meant for + * the device currently running. + * - IX_FAIL if NPE is not available or image is failed to be located. + * A warning is issued if the NPE is not present. + */ +PUBLIC IX_STATUS +ixNpeDlCustomImageNpeInitAndStart (UINT32 *imageLibrary, + UINT32 npeImageId); + + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId, + UINT8 *functionalityId) + * + * @brief Gets the functionality of the image last loaded on a particular NPE + * + * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. + * @param functionalityId UINT8* [out] - the functionality ID of the image + * last loaded on the NPE. + * + * This function retrieves the functionality ID of the image most recently + * downloaded successfully to the specified NPE. If the NPE does not contain + * a valid image, this function returns a FAIL status. + * + * @warning This function is not intended for general use, as a knowledge of + * how to interpret the functionality ID is required. As such, this function + * should only be used by other Access Layer components of the IXP400 Software + * Release. + * + * @pre + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL if the NPE does not have a valid image loaded + */ +PUBLIC IX_STATUS +ixNpeDlLoadedImageFunctionalityGet (IxNpeDlNpeId npeId, + UINT8 *functionalityId); + + +/** + * @ingroup IxNpeDl + * + * @fn IX_STATUS ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary) + * + * @brief This instructs NPE Downloader to use client-supplied microcode image library. + * + * @param clientImageLibrary UINT32* [in] - Pointer to the client-supplied + * NPE microcode image library + * + * This function sets NPE Downloader to use a client-supplied microcode image library + * instead of the standard image library which is included by the NPE Downloader. + * <b>This function is provided mainly for increased testability and should not + * be used in normal circumstances.</b> When not used, NPE Downloader will use + * a "built-in" image library, local to this component, which should always contain the + * latest microcode for the NPEs. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - <i>clientImageLibrary</i> should point to a microcode image library valid for use + * by the NPE Downloader component. + * + * @post + * - the client-supplied image library will be used for all subsequent operations + * performed by the NPE Downloader + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL if the client-supplied image library did not contain a valid signature + */ +PUBLIC IX_STATUS +ixNpeDlMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, + BOOL verify) + * + * @brief Stop, reset, download microcode and finally start NPE. + * + * @param imageIdPtr @ref IxNpeDlImageId* [in] - Pointer to Id of the microcode + * image to download. + * @param verify BOOL [in] - ON/OFF option to verify the download. If ON + * (verify == TRUE), the Downloader will read back + * each word written to the NPE registers to + * ensure the download operation was successful. + * + * Using the <i>imageIdPtr</i>, this function locates a particular image of + * microcode in the microcode image library in memory, and downloads the microcode + * to a particular NPE. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - The Client is responsible for ensuring mutual access to the NPE. + * - The Client should use ixNpeDlLatestImageGet() to obtain the latest + * version of the image before attempting download. + * @post + * - The NPE Instruction Pipeline will be cleared if State Information + * has been downloaded. + * - If the download fails with a critical error, the NPE may + * be left in an ususable state. + * @return + * - IX_SUCCESS if the download was successful; + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_NPEDL_CRITICAL_NPE_ERR if a critical NPE error occured during + * download + * - IX_PARAM_CRITICAL_MICROCODE_ERR if a critical microcode error + * occured during download + * - IX_FAIL if NPE is not available or image is failed to be located. + * A warning is issued if the NPE is not present. + */ +PUBLIC IX_STATUS +ixNpeDlImageDownload (IxNpeDlImageId *imageIdPtr, + BOOL verify); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr) + * + * @brief Get the number of Images available in a microcode image library + * + * @param numImagesPtr UINT32* [out] - A pointer to the number of images in + * the image library. + * + * Gets the number of images available in the microcode image library. + * Then returns this in a variable pointed to by <i>numImagesPtr</i>. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - The Client should declare the variable to which numImagesPtr points + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL otherwise + */ +PUBLIC IX_STATUS +ixNpeDlAvailableImagesCountGet (UINT32 *numImagesPtr); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr, + UINT32 *listSizePtr) + * + * @brief Get a list of the images available in a microcode image library + * + * @param imageIdListPtr @ref IxNpeDlImageId* [out] - Array to contain list of + * image Ids (memory + * allocated by Client). + * @param listSizePtr UINT32* [inout] - As an input, this param should point + * to the max number of Ids the + * <i>imageIdListPtr</i> array can + * hold. NpeDl will replace the input + * value of this parameter with the + * number of image Ids actually filled + * into the array before returning. + * + * Finds list of images available in the microcode image library. + * Fills these into the array pointed to by <i>imageIdListPtr</i> + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - The Client should declare the variable to which numImagesPtr points + * - The Client should create an array (<i>imageIdListPtr</i>) large + * enough to contain all the image Ids in the image library + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL otherwise + */ +PUBLIC IX_STATUS +ixNpeDlAvailableImagesListGet (IxNpeDlImageId *imageIdListPtr, + UINT32 *listSizePtr); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId, + IxNpeDlImageId *imageIdPtr) + * + * @brief Gets the Id of the image currently loaded on a particular NPE + * + * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. + * @param imageIdPtr @ref IxNpeDlImageId* [out] - Pointer to the where the + * image id should be stored. + * + * If an image of microcode was previously downloaded successfully to the NPE + * by NPE Downloader, this function returns in <i>imageIdPtr</i> the image + * Id of that image loaded on the NPE. + * + * @pre + * - The Client has allocated memory to the <i>imageIdPtr</i> pointer. + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL if the NPE doesn't currently have a image loaded + */ +PUBLIC IX_STATUS +ixNpeDlLoadedImageGet (IxNpeDlNpeId npeId, + IxNpeDlImageId *imageIdPtr); + +/** + * @fn PUBLIC IX_STATUS ixNpeDlLatestImageGet (IxNpeDlNpeId npeId, IxNpeDlFunctionalityId + functionalityId, IxNpeDlImageId *imageIdPtr) + * + * @brief This instructs NPE Downloader to get Id of the latest version for an + * image that is specified by the client. + * + * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. + * @param functionalityId @ref IxNpeDlFunctionalityId [in] - functionality of the image + * @param imageIdPtr @ref IxNpeDlImageId* [out] - Pointer to the where the + * image id should be stored. + * + * This function sets NPE Downloader to return the id of the latest version for + * image. The user will select the image by providing a particular NPE + * (specifying <i>npeId</i>) with particular functionality (specifying + * <i>FunctionalityId</i>). The most recent version available as determined by the + * highest Major and Minor revision numbers is returned in <i>imageIdPtr</i>. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL otherwise + */ +PUBLIC IX_STATUS +ixNpeDlLatestImageGet (IxNpeDlNpeId npeId, + IxNpeDlFunctionalityId functionalityId, + IxNpeDlImageId *imageIdPtr); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId) + * + * @brief Stops and Resets an NPE + * + * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE. + * + * This function performs a soft NPE reset by writing reset values to + * particular NPE registers. Note that this does not reset NPE co-processors. + * This implicitly stops NPE code execution before resetting the NPE. + * + * @note It is no longer necessary to call this function before downloading + * a new image to the NPE. It is left on the API only to allow greater control + * of NPE execution if required. Where appropriate, use @ref ixNpeDlNpeInitAndStart + * or @ref ixNpeDlCustomImageNpeInitAndStart instead. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - The Client is responsible for ensuring mutual access to the NPE. + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL otherwise + * - IX_NPEDL_CRITICAL_NPE_ERR failed to reset NPE due to timeout error. + * Timeout error could happen if NPE hang + */ +PUBLIC IX_STATUS +ixNpeDlNpeStopAndReset (IxNpeDlNpeId npeId); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId) + * + * @brief Starts code execution on a NPE + * + * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE + * + * Starts execution of code on a particular NPE. A client would typically use + * this after a download to NPE is performed, to start/restart code execution + * on the NPE. + * + * @note It is no longer necessary to call this function after downloading + * a new image to the NPE. It is left on the API only to allow greater control + * of NPE execution if required. Where appropriate, use @ref ixNpeDlNpeInitAndStart + * or @ref ixNpeDlCustomImageNpeInitAndStart instead. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - The Client is responsible for ensuring mutual access to the NPE. + * - Note that this function does not set the NPE Next Program Counter + * (NextPC), so it should be set beforehand if required by downloading + * appropriate State Information (using ixNpeDlVersionDownload()). + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL otherwise + */ +PUBLIC IX_STATUS +ixNpeDlNpeExecutionStart (IxNpeDlNpeId npeId); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId) + * + * @brief Stops code execution on a NPE + * + * @param npeId @ref IxNpeDlNpeId [in] - Id of the target NPE + * + * Stops execution of code on a particular NPE. This would typically be used + * by a client before a download to NPE is performed, to stop code execution on + * an NPE, unless ixNpeDlNpeStopAndReset() is used instead. Unlike + * ixNpeDlNpeStopAndReset(), this function only halts the NPE and leaves + * all registers and settings intact. This is useful, for example, between + * stages of a multi-stage download, to stop the NPE prior to downloading the + * next image while leaving the current state of the NPE intact.. + * + * @warning <b>THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED.</b> + * It will be removed in a future release. + * See @ref ixNpeDlNpeInitAndStart and @ref ixNpeDlCustomImageNpeInitAndStart. + * + * @pre + * - The Client is responsible for ensuring mutual access to the NPE. + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_NPEDL_PARAM_ERR if a parameter error occured + * - IX_FAIL otherwise + */ +PUBLIC IX_STATUS +ixNpeDlNpeExecutionStop (IxNpeDlNpeId npeId); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC IX_STATUS ixNpeDlUnload (void) + * + * @brief This function will uninitialise the IxNpeDl component. + * + * This function will uninitialise the IxNpeDl component. It should only be + * called once, and only if the IxNpeDl component has already been initialised by + * calling any of the following functions: + * - @ref ixNpeDlNpeInitAndStart + * - @ref ixNpeDlCustomImageNpeInitAndStart + * - @ref ixNpeDlImageDownload (deprecated) + * - @ref ixNpeDlNpeStopAndReset (deprecated) + * - @ref ixNpeDlNpeExecutionStop (deprecated) + * - @ref ixNpeDlNpeExecutionStart (deprecated) + * + * If possible, this function should be called before a soft reboot or unloading + * a kernel module to perform any clean up operations required for IxNpeDl. + * + * The following actions will be performed by this function: + * - Unmapping of any kernel memory mapped by IxNpeDl + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ + +PUBLIC IX_STATUS +ixNpeDlUnload (void); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC void ixNpeDlStatsShow (void) + * + * @brief This function will display run-time statistics from the IxNpeDl + * component + * + * @return none + */ +PUBLIC void +ixNpeDlStatsShow (void); + +/** + * @ingroup IxNpeDl + * + * @fn PUBLIC void ixNpeDlStatsReset (void) + * + * @brief This function will reset the statistics of the IxNpeDl component + * + * @return none + */ +PUBLIC void +ixNpeDlStatsReset (void); + +#endif /* IXNPEDL_H */ + +/** + * @} defgroup IxNpeDl + */ + + diff --git a/drivers/net/npe/include/IxNpeDlImageMgr_p.h b/drivers/net/npe/include/IxNpeDlImageMgr_p.h new file mode 100644 index 0000000000..622f879a41 --- /dev/null +++ b/drivers/net/npe/include/IxNpeDlImageMgr_p.h @@ -0,0 +1,363 @@ +/** + * @file IxNpeDlImageMgr_p.h + * + * @author Intel Corporation + * @date 14 December 2001 + + * @brief This file contains the private API for the ImageMgr module + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeDlImageMgr_p IxNpeDlImageMgr_p + * + * @brief The private API for the IxNpeDl ImageMgr module + * + * @{ + */ + +#ifndef IXNPEDLIMAGEMGR_P_H +#define IXNPEDLIMAGEMGR_P_H + + +/* + * Put the user defined include files required. + */ +#include "IxNpeDl.h" +#include "IxOsalTypes.h" + + +/* + * #defines and macros + */ + +/** + * @def IX_NPEDL_IMAGEMGR_SIGNATURE + * + * @brief Signature found as 1st word in a microcode image library + */ +#define IX_NPEDL_IMAGEMGR_SIGNATURE 0xDEADBEEF + +/** + * @def IX_NPEDL_IMAGEMGR_END_OF_HEADER + * + * @brief Marks end of header in a microcode image library + */ +#define IX_NPEDL_IMAGEMGR_END_OF_HEADER 0xFFFFFFFF + +/** + * @def IX_NPEDL_IMAGEID_NPEID_OFFSET + * + * @brief Offset from LSB of NPE ID field in Image ID + */ +#define IX_NPEDL_IMAGEID_NPEID_OFFSET 24 + +/** + * @def IX_NPEDL_IMAGEID_DEVICEID_OFFSET + * + * @brief Offset from LSB of Device ID field in Image ID + */ +#define IX_NPEDL_IMAGEID_DEVICEID_OFFSET 28 + +/** + * @def IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET + * + * @brief Offset from LSB of Functionality ID field in Image ID + */ +#define IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET 16 + +/** + * @def IX_NPEDL_IMAGEID_MAJOR_OFFSET + * + * @brief Offset from LSB of Major revision field in Image ID + */ +#define IX_NPEDL_IMAGEID_MAJOR_OFFSET 8 + +/** + * @def IX_NPEDL_IMAGEID_MINOR_OFFSET + * + * @brief Offset from LSB of Minor revision field in Image ID + */ +#define IX_NPEDL_IMAGEID_MINOR_OFFSET 0 + + +/** + * @def IX_NPEDL_NPEID_FROM_IMAGEID_GET + * + * @brief Macro to extract NPE ID field from Image ID + */ +#define IX_NPEDL_NPEID_FROM_IMAGEID_GET(imageId) \ + (((imageId) >> IX_NPEDL_IMAGEID_NPEID_OFFSET) & \ + IX_NPEDL_NPEIMAGE_NPEID_MASK) + +/** + * @def IX_NPEDL_DEVICEID_FROM_IMAGEID_GET + * + * @brief Macro to extract NPE ID field from Image ID + */ +#define IX_NPEDL_DEVICEID_FROM_IMAGEID_GET(imageId) \ + (((imageId) >> IX_NPEDL_IMAGEID_DEVICEID_OFFSET) & \ + IX_NPEDL_NPEIMAGE_DEVICEID_MASK) + +/** + * @def IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET + * + * @brief Macro to extract Functionality ID field from Image ID + */ +#define IX_NPEDL_FUNCTIONID_FROM_IMAGEID_GET(imageId) \ + (((imageId) >> IX_NPEDL_IMAGEID_FUNCTIONID_OFFSET) & \ + IX_NPEDL_NPEIMAGE_FIELD_MASK) + +/** + * @def IX_NPEDL_MAJOR_FROM_IMAGEID_GET + * + * @brief Macro to extract Major revision field from Image ID + */ +#define IX_NPEDL_MAJOR_FROM_IMAGEID_GET(imageId) \ + (((imageId) >> IX_NPEDL_IMAGEID_MAJOR_OFFSET) & \ + IX_NPEDL_NPEIMAGE_FIELD_MASK) + +/** + * @def IX_NPEDL_MINOR_FROM_IMAGEID_GET + * + * @brief Macro to extract Minor revision field from Image ID + */ +#define IX_NPEDL_MINOR_FROM_IMAGEID_GET(imageId) \ + (((imageId) >> IX_NPEDL_IMAGEID_MINOR_OFFSET) & \ + IX_NPEDL_NPEIMAGE_FIELD_MASK) + + +/* + * Prototypes for interface functions + */ + +/** + * @fn IX_STATUS ixNpeDlImageMgrMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary) + * + * @brief This instructs NPE Downloader to use client-supplied microcode image library. + * + * This function sets NPE Downloader to use a client-supplied microcode image library + * instead of the standard image library which is included by the NPE Downloader. + * + * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. + * It will be removed in a future release. + * See API header file IxNpeDl.h for more information. + * + * @pre + * - <i>clientImageLibrary</i> should point to a microcode image library valid for use + * by the NPE Downloader component. + * + * @post + * - the client-supplied image uibrary will be used for all subsequent operations + * performed by the NPE Downloader + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL if the client-supplied image library did not contain a valid signature + */ +IX_STATUS +ixNpeDlImageMgrMicrocodeImageLibraryOverride (UINT32 *clientImageLibrary); + + +/** + * @fn IX_STATUS ixNpeDlImageMgrImageListExtract (IxNpeDlImageId *imageListPtr, + UINT32 *numImages) + * + * @brief Extracts a list of images available in the NPE microcode image library. + * + * @param IxNpeDlImageId* [out] imageListPtr - pointer to array to contain + * a list of images. If NULL, + * only the number of images + * is returned (in + * <i>numImages</i>) + * @param UINT32* [inout] numImages - As input, it points to a variable + * containing the number of images which + * can be stored in the + * <i>imageListPtr</i> array. Its value + * is ignored as input if + * <i>imageListPtr</i> is NULL. As an + * output, it will contain number of + * images in the image library. + * + * This function reads the header of the microcode image library and extracts a list of the + * images available in the image library. It can also be used to find the number of + * images in the image library. + * + * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. + * It will be removed in a future release. + * See API header file IxNpeDl.h for more information. + * + * @pre + * - if <i>imageListPtr</i> != NULL, <i>numImages</i> should reflect the + * number of image Id elements the <i>imageListPtr</i> can contain. + * + * @post + * - <i>numImages</i> will reflect the number of image Id's found in the + * microcode image library. + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ +IX_STATUS +ixNpeDlImageMgrImageListExtract (IxNpeDlImageId *imageListPtr, + UINT32 *numImages); + + +/** + * @fn IX_STATUS ixNpeDlImageMgrImageLocate (IxNpeDlImageId *imageId, + UINT32 **imagePtr, + UINT32 *imageSize) + * + * @brief Finds a image block in the NPE microcode image library. + * + * @param IxNpeDlImageId* [in] imageId - the id of the image to locate + * @param UINT32** [out] imagePtr - pointer to the image in memory + * @param UINT32* [out] imageSize - size (in 32-bit words) of image + * + * This function examines the header of the microcode image library for the location + * and size of the specified image. + * + * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. + * It will be removed in a future release. + * See API header file IxNpeDl.h for more information. + * + * @pre + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ +IX_STATUS +ixNpeDlImageMgrImageLocate (IxNpeDlImageId *imageId, + UINT32 **imagePtr, + UINT32 *imageSize); + +/** + * @fn IX_STATUS ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId) + * + * @brief Finds the most recent version of an image in the NPE image library. + * + * @param IxNpeDlImageId* [inout] imageId - the id of the image + * + * This function determines the most recent version of a specified image by its + * higest major release and minor revision numbers + * + * @note THIS FUNCTION HAS BEEN DEPRECATED AND SHOULD NOT BE USED. + * It will be removed in a future release. + * See API header file IxNpeDl.h for more information. + * + * @pre + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ +IX_STATUS +ixNpeDlImageMgrLatestImageExtract (IxNpeDlImageId *imageId); + +/** + * @fn void ixNpeDlImageMgrStatsShow (void) + * + * @brief This function will display the statistics of the IxNpeDl ImageMgr + * module + * + * @return none + */ +void +ixNpeDlImageMgrStatsShow (void); + + +/** + * @fn void ixNpeDlImageMgrStatsReset (void) + * + * @brief This function will reset the statistics of the IxNpeDl ImageMgr + * module + * + * @return none + */ +void +ixNpeDlImageMgrStatsReset (void); + + +/** + * @fn IX_STATUS ixNpeDlImageMgrImageGet (UINT32 *imageLibrary, + UINT32 imageId, + UINT32 **imagePtr, + UINT32 *imageSize) + * + * @brief Finds a image block in the NPE microcode image library. + * + * @param UINT32* [in] imageLibrary - the image library to use + * @param UINT32 [in] imageId - the id of the image to locate + * @param UINT32** [out] imagePtr - pointer to the image in memory + * @param UINT32* [out] imageSize - size (in 32-bit words) of image + * + * This function examines the header of the specified microcode image library + * for the location and size of the specified image. It returns a pointer to + * the image in the <i>imagePtr</i> parameter. + * If no image library is specified (imageLibrary == NULL), then the default + * built-in image library will be used. + * + * @pre + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ +IX_STATUS +ixNpeDlImageMgrImageFind (UINT32 *imageLibrary, + UINT32 imageId, + UINT32 **imagePtr, + UINT32 *imageSize); + + +#endif /* IXNPEDLIMAGEMGR_P_H */ + +/** + * @} defgroup IxNpeDlImageMgr_p + */ diff --git a/drivers/net/npe/include/IxNpeDlMacros_p.h b/drivers/net/npe/include/IxNpeDlMacros_p.h new file mode 100644 index 0000000000..e32906a63a --- /dev/null +++ b/drivers/net/npe/include/IxNpeDlMacros_p.h @@ -0,0 +1,414 @@ +/** + * @file IxNpeDlMacros_p.h + * + * @author Intel Corporation + * @date 21 January 2002 + * + * @brief This file contains the macros for the IxNpeDl component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeDlMacros_p IxNpeDlMacros_p + * + * @brief Macros for the IxNpeDl component. + * + * @{ + */ + +#ifndef IXNPEDLMACROS_P_H +#define IXNPEDLMACROS_P_H + + +/* + * Put the user defined include files required. + */ +#if (CPU != XSCALE) +/* To support IxNpeDl unit tests... */ +#include <stdio.h> +#include "test/IxNpeDlTestReg.h" + +#else +#include "IxOsal.h" + +#endif + + +/* + * Typedefs + */ + +/** + * @typedef IxNpeDlTraceTypes + * @brief Enumeration defining IxNpeDl trace levels + */ +typedef enum +{ + IX_NPEDL_TRACE_OFF, /**< no trace */ + IX_NPEDL_DEBUG, /**< debug */ + IX_NPEDL_FN_ENTRY_EXIT /**< function entry/exit */ +} IxNpeDlTraceTypes; + + +/* + * #defines and macros. + */ + +/* Implementation of the following macros for use with IxNpeDl unit test code */ +#if (CPU != XSCALE) + + +/** + * @def IX_NPEDL_TRACE_LEVEL + * + * @brief IxNpeDl debug trace level + */ +#define IX_NPEDL_TRACE_LEVEL IX_NPEDL_FN_ENTRY_EXIT + +/** + * @def IX_NPEDL_ERROR_REPORT + * + * @brief Mechanism for reporting IxNpeDl software errors + * + * @param char* [in] STR - Error string to report + * + * This macro simply prints the error string passed. + * Intended for use with IxNpeDl unit test code. + * + * @return none + */ +#define IX_NPEDL_ERROR_REPORT(STR) printf ("IxNpeDl ERROR: %s\n", (STR)); + +/** + * @def IX_NPEDL_WARNING_REPORT + * + * @brief Mechanism for reporting IxNpeDl software errors + * + * @param char* [in] STR - Error string to report + * + * This macro simply prints the error string passed. + * Intended for use with IxNpeDl unit test code. + * + * @return none + */ +#define IX_NPEDL_WARNING_REPORT(STR) printf ("IxNpeDl WARNING: %s\n", (STR)); + +/** + * @def IX_NPEDL_TRACE0 + * + * @brief Mechanism for tracing debug for the IxNpeDl component, for no arguments + * + * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values + * @param char* [in] STR - Trace string + * + * This macro simply prints the trace string passed, if the level is supported. + * Intended for use with IxNpeDl unit test code. + * + * @return none + */ +#define IX_NPEDL_TRACE0(LEVEL, STR) \ +{ \ + if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \ + { \ + printf ("IxNpeDl TRACE: "); \ + printf ((STR)); \ + printf ("\n"); \ + } \ +} + + /** + * @def IX_NPEDL_TRACE1 + * + * @brief Mechanism for tracing debug for the IxNpeDl component, with 1 argument + * + * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values + * @param char* [in] STR - Trace string + * @param argType [in] ARG1 - Argument to trace + * + * This macro simply prints the trace string passed, if the level is supported. + * Intended for use with IxNpeDl unit test code. + * + * @return none + */ +#define IX_NPEDL_TRACE1(LEVEL, STR, ARG1) \ +{ \ + if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \ + { \ + printf ("IxNpeDl TRACE: "); \ + printf (STR, ARG1); \ + printf ("\n"); \ + } \ +} + +/** + * @def IX_NPEDL_TRACE2 + * + * @brief Mechanism for tracing debug for the IxNpeDl component, with 2 arguments + * + * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values + * @param char* [in] STR - Trace string + * @param argType [in] ARG1 - Argument to trace + * @param argType [in] ARG2 - Argument to trace + * + * This macro simply prints the trace string passed, if the level is supported. + * Intended for use with IxNpeDl unit test code. + * + * @return none + */ +#define IX_NPEDL_TRACE2(LEVEL, STR, ARG1, ARG2) \ +{ \ + if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \ + { \ + printf ("IxNpeDl TRACE: "); \ + printf (STR, ARG1, ARG2); \ + printf ("\n"); \ + } \ +} + + +/** + * @def IX_NPEDL_REG_WRITE + * + * @brief Mechanism for writing to a memory-mapped register + * + * @param UINT32 [in] base - Base memory address for this NPE's registers + * @param UINT32 [in] offset - Offset from base memory address + * @param UINT32 [in] value - Value to write to register + * + * This macro calls a function from Unit Test code to write a register. This + * allows extra flexibility for unit testing of the IxNpeDl component. + * + * @return none + */ +#define IX_NPEDL_REG_WRITE(base, offset, value) \ +{ \ + ixNpeDlTestRegWrite (base, offset, value); \ +} + + +/** + * @def IX_NPEDL_REG_READ + * + * @brief Mechanism for reading from a memory-mapped register + * + * @param UINT32 [in] base - Base memory address for this NPE's registers + * @param UINT32 [in] offset - Offset from base memory address + * @param UINT32 *[out] value - Value read from register + * + * This macro calls a function from Unit Test code to read a register. This + * allows extra flexibility for unit testing of the IxNpeDl component. + * + * @return none + */ +#define IX_NPEDL_REG_READ(base, offset, value) \ +{ \ + ixNpeDlTestRegRead (base, offset, value); \ +} + + +/* Implementation of the following macros when integrated with IxOsal */ +#else /* #if (CPU != XSCALE) */ + + +/** + * @def IX_NPEDL_TRACE_LEVEL + * + * @brief IxNpeDl debug trace level + */ +#define IX_NPEDL_TRACE_LEVEL IX_NPEDL_DEBUG + + +/** + * @def IX_NPEDL_ERROR_REPORT + * + * @brief Mechanism for reporting IxNpeDl software errors + * + * @param char* [in] STR - Error string to report + * + * This macro is used to report IxNpeDl software errors. + * + * @return none + */ +#define IX_NPEDL_ERROR_REPORT(STR) \ + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, STR, 0, 0, 0, 0, 0, 0); + +/** + * @def IX_NPEDL_WARNING_REPORT + * + * @brief Mechanism for reporting IxNpeDl software warnings + * + * @param char* [in] STR - Warning string to report + * + * This macro is used to report IxNpeDl software warnings. + * + * @return none + */ +#define IX_NPEDL_WARNING_REPORT(STR) \ + ixOsalLog (IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, STR, 0, 0, 0, 0, 0, 0); + + +/** + * @def IX_NPEDL_TRACE0 + * + * @brief Mechanism for tracing debug for the IxNpeDl component, for no arguments + * + * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values + * @param char* [in] STR - Trace string + * + * This macro simply prints the trace string passed, if the level is supported. + * + * @return none + */ +#define IX_NPEDL_TRACE0(LEVEL, STR) \ +{ \ + if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \ + { \ + if (LEVEL == IX_NPEDL_FN_ENTRY_EXIT) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, IX_OSAL_LOG_DEV_STDOUT, STR, 0, 0, 0, 0, 0, 0); \ + } \ + else if (LEVEL == IX_NPEDL_DEBUG) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, STR, 0, 0, 0, 0, 0, 0); \ + } \ + } \ +} + +/** + * @def IX_NPEDL_TRACE1 + * + * @brief Mechanism for tracing debug for the IxNpeDl component, with 1 argument + * + * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values + * @param char* [in] STR - Trace string + * @param argType [in] ARG1 - Argument to trace + * + * This macro simply prints the trace string passed, if the level is supported. + * + * @return none + */ +#define IX_NPEDL_TRACE1(LEVEL, STR, ARG1) \ +{ \ + if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \ + { \ + if (LEVEL == IX_NPEDL_FN_ENTRY_EXIT) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, 0, 0, 0, 0, 0); \ + } \ + else if (LEVEL == IX_NPEDL_DEBUG) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, 0, 0, 0, 0, 0); \ + } \ + } \ +} + +/** + * @def IX_NPEDL_TRACE2 + * + * @brief Mechanism for tracing debug for the IxNpeDl component, with 2 arguments + * + * @param unsigned [in] LEVEL - one of IxNpeDlTraceTypes enumerated values + * @param char* [in] STR - Trace string + * @param argType [in] ARG1 - Argument to trace + * @param argType [in] ARG2 - Argument to trace + * + * This macro simply prints the trace string passed, if the level is supported. + * + * @return none + */ +#define IX_NPEDL_TRACE2(LEVEL, STR, ARG1, ARG2) \ +{ \ + if (LEVEL <= IX_NPEDL_TRACE_LEVEL) \ + { \ + if (LEVEL == IX_NPEDL_FN_ENTRY_EXIT) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_DEBUG3, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, ARG2, 0, 0, 0, 0); \ + } \ + else if (LEVEL == IX_NPEDL_DEBUG) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, STR, ARG1, ARG2, 0, 0, 0, 0); \ + } \ + } \ +} + +/** + * @def IX_NPEDL_REG_WRITE + * + * @brief Mechanism for writing to a memory-mapped register + * + * @param UINT32 [in] base - Base memory address for this NPE's registers + * @param UINT32 [in] offset - Offset from base memory address + * @param UINT32 [in] value - Value to write to register + * + * This macro forms the address of the register from base address + offset, and + * dereferences that address to write the contents of the register. + * + * @return none + */ +#define IX_NPEDL_REG_WRITE(base, offset, value) \ + IX_OSAL_WRITE_LONG(((base) + (offset)), (value)) + + + +/** + * @def IX_NPEDL_REG_READ + * + * @brief Mechanism for reading from a memory-mapped register + * + * @param UINT32 [in] base - Base memory address for this NPE's registers + * @param UINT32 [in] offset - Offset from base memory address + * @param UINT32 *[out] value - Value read from register + * + * This macro forms the address of the register from base address + offset, and + * dereferences that address to read the register contents. + * + * @return none + */ +#define IX_NPEDL_REG_READ(base, offset, value) \ + *(value) = IX_OSAL_READ_LONG(((base) + (offset))) + +#endif /* #if (CPU != XSCALE) */ + +#endif /* IXNPEDLMACROS_P_H */ + +/** + * @} defgroup IxNpeDlMacros_p + */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h new file mode 100644 index 0000000000..f682126677 --- /dev/null +++ b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h @@ -0,0 +1,893 @@ +/** + * @file IxNpeDlNpeMgrEcRegisters_p.h + * + * @author Intel Corporation + * @date 14 December 2001 + + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +#ifndef IXNPEDLNPEMGRECREGISTERS_P_H +#define IXNPEDLNPEMGRECREGISTERS_P_H + +#include "IxOsal.h" + +/* + * Base Memory Addresses for accessing NPE registers + */ + +#define IX_NPEDL_NPE_BASE (IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE) + +#define IX_NPEDL_NPEA_OFFSET (0x6000) /**< NPE-A register base offset */ +#define IX_NPEDL_NPEB_OFFSET (0x7000) /**< NPE-B register base offset */ +#define IX_NPEDL_NPEC_OFFSET (0x8000) /**< NPE-C register base offset */ + +/** + * @def IX_NPEDL_NPEBASEADDRESS_NPEA + * @brief Base Memory Address of NPE-A Configuration Bus registers + */ +#define IX_NPEDL_NPEBASEADDRESS_NPEA (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEA_OFFSET) + +/** + * @def IX_NPEDL_NPEBASEADDRESS_NPEB + * @brief Base Memory Address of NPE-B Configuration Bus registers + */ +#define IX_NPEDL_NPEBASEADDRESS_NPEB (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEB_OFFSET) + +/** + * @def IX_NPEDL_NPEBASEADDRESS_NPEC + * @brief Base Memory Address of NPE-C Configuration Bus registers + */ +#define IX_NPEDL_NPEBASEADDRESS_NPEC (IX_NPEDL_NPE_BASE + IX_NPEDL_NPEC_OFFSET) + + +/* + * Instruction Memory Size (in words) for each NPE + */ + +/** + * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEA + * @brief Size (in words) of NPE-A Instruction Memory + */ +#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEA 4096 + +/** + * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEB + * @brief Size (in words) of NPE-B Instruction Memory + */ +#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEB 2048 + +/** + * @def IX_NPEDL_INS_MEMSIZE_WORDS_NPEC + * @brief Size (in words) of NPE-B Instruction Memory + */ +#define IX_NPEDL_INS_MEMSIZE_WORDS_NPEC 2048 + + +/* + * Data Memory Size (in words) for each NPE + */ + +/** + * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA + * @brief Size (in words) of NPE-A Data Memory + */ +#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEA 2048 + +/** + * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB + * @brief Size (in words) of NPE-B Data Memory + */ +#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEB 2048 + +/** + * @def IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC + * @brief Size (in words) of NPE-C Data Memory + */ +#define IX_NPEDL_DATA_MEMSIZE_WORDS_NPEC 2048 + + +/* + * Configuration Bus Register offsets (in bytes) from NPE Base Address + */ + +/** + * @def IX_NPEDL_REG_OFFSET_EXAD + * @brief Offset (in bytes) of EXAD (Execution Address) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_EXAD 0x00000000 + +/** + * @def IX_NPEDL_REG_OFFSET_EXDATA + * @brief Offset (in bytes) of EXDATA (Execution Data) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_EXDATA 0x00000004 + +/** + * @def IX_NPEDL_REG_OFFSET_EXCTL + * @brief Offset (in bytes) of EXCTL (Execution Control) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_EXCTL 0x00000008 + +/** + * @def IX_NPEDL_REG_OFFSET_EXCT + * @brief Offset (in bytes) of EXCT (Execution Count) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_EXCT 0x0000000C + +/** + * @def IX_NPEDL_REG_OFFSET_AP0 + * @brief Offset (in bytes) of AP0 (Action Point 0) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_AP0 0x00000010 + +/** + * @def IX_NPEDL_REG_OFFSET_AP1 + * @brief Offset (in bytes) of AP1 (Action Point 1) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_AP1 0x00000014 + +/** + * @def IX_NPEDL_REG_OFFSET_AP2 + * @brief Offset (in bytes) of AP2 (Action Point 2) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_AP2 0x00000018 + +/** + * @def IX_NPEDL_REG_OFFSET_AP3 + * @brief Offset (in bytes) of AP3 (Action Point 3) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_AP3 0x0000001C + +/** + * @def IX_NPEDL_REG_OFFSET_WFIFO + * @brief Offset (in bytes) of WFIFO (Watchpoint FIFO) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_WFIFO 0x00000020 + +/** + * @def IX_NPEDL_REG_OFFSET_WC + * @brief Offset (in bytes) of WC (Watch Count) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_WC 0x00000024 + +/** + * @def IX_NPEDL_REG_OFFSET_PROFCT + * @brief Offset (in bytes) of PROFCT (Profile Count) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_PROFCT 0x00000028 + +/** + * @def IX_NPEDL_REG_OFFSET_STAT + * @brief Offset (in bytes) of STAT (Messaging Status) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_STAT 0x0000002C + +/** + * @def IX_NPEDL_REG_OFFSET_CTL + * @brief Offset (in bytes) of CTL (Messaging Control) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_CTL 0x00000030 + +/** + * @def IX_NPEDL_REG_OFFSET_MBST + * @brief Offset (in bytes) of MBST (Mailbox Status) register from NPE Base + * Address + */ +#define IX_NPEDL_REG_OFFSET_MBST 0x00000034 + +/** + * @def IX_NPEDL_REG_OFFSET_FIFO + * @brief Offset (in bytes) of FIFO (messaging in/out FIFO) register from NPE + * Base Address + */ +#define IX_NPEDL_REG_OFFSET_FIFO 0x00000038 + + +/* + * Non-zero reset values for the Configuration Bus registers + */ + +/** + * @def IX_NPEDL_REG_RESET_FIFO + * @brief Reset value for Mailbox (MBST) register + * NOTE that if used, it should be complemented with an NPE intruction + * to clear the Mailbox at the NPE side as well + */ +#define IX_NPEDL_REG_RESET_MBST 0x0000F0F0 + + +/* + * Bit-masks used to read/write particular bits in Configuration Bus registers + */ + +/** + * @def IX_NPEDL_MASK_WFIFO_VALID + * @brief Masks the VALID bit in the WFIFO register + */ +#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000 + +/** + * @def IX_NPEDL_MASK_STAT_OFNE + * @brief Masks the OFNE bit in the STAT register + */ +#define IX_NPEDL_MASK_STAT_OFNE 0x00010000 + +/** + * @def IX_NPEDL_MASK_STAT_IFNE + * @brief Masks the IFNE bit in the STAT register + */ +#define IX_NPEDL_MASK_STAT_IFNE 0x00080000 + + +/* + * EXCTL (Execution Control) Register commands +*/ + +/** + * @def IX_NPEDL_EXCTL_CMD_NPE_STEP + * @brief EXCTL Command to Step execution of an NPE Instruction + */ + +#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01 + +/** + * @def IX_NPEDL_EXCTL_CMD_NPE_START + * @brief EXCTL Command to Start NPE execution + */ +#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02 + +/** + * @def IX_NPEDL_EXCTL_CMD_NPE_STOP + * @brief EXCTL Command to Stop NPE execution + */ +#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03 + +/** + * @def IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE + * @brief EXCTL Command to Clear NPE instruction pipeline + */ +#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04 + +/** + * @def IX_NPEDL_EXCTL_CMD_RD_INS_MEM + * @brief EXCTL Command to read NPE instruction memory at address in EXAD + * register and return value in EXDATA register + */ +#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10 + +/** + * @def IX_NPEDL_EXCTL_CMD_WR_INS_MEM + * @brief EXCTL Command to write NPE instruction memory at address in EXAD + * register with data in EXDATA register + */ +#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11 + +/** + * @def IX_NPEDL_EXCTL_CMD_RD_DATA_MEM + * @brief EXCTL Command to read NPE data memory at address in EXAD + * register and return value in EXDATA register + */ +#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12 + +/** + * @def IX_NPEDL_EXCTL_CMD_WR_DATA_MEM + * @brief EXCTL Command to write NPE data memory at address in EXAD + * register with data in EXDATA register + */ +#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13 + +/** + * @def IX_NPEDL_EXCTL_CMD_RD_ECS_REG + * @brief EXCTL Command to read Execution Access register at address in EXAD + * register and return value in EXDATA register + */ +#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14 + +/** + * @def IX_NPEDL_EXCTL_CMD_WR_ECS_REG + * @brief EXCTL Command to write Execution Access register at address in EXAD + * register with data in EXDATA register + */ +#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15 + +/** + * @def IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT + * @brief EXCTL Command to clear Profile Count register + */ +#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C + + +/* + * EXCTL (Execution Control) Register status bit masks + */ + +/** + * @def IX_NPEDL_EXCTL_STATUS_RUN + * @brief Masks the RUN status bit in the EXCTL register + */ +#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000 + +/** + * @def IX_NPEDL_EXCTL_STATUS_STOP + * @brief Masks the STOP status bit in the EXCTL register + */ +#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000 + +/** + * @def IX_NPEDL_EXCTL_STATUS_CLEAR + * @brief Masks the CLEAR status bit in the EXCTL register + */ +#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000 + +/** + * @def IX_NPEDL_EXCTL_STATUS_ECS_K + * @brief Masks the K (pipeline Klean) status bit in the EXCTL register + */ +#define IX_NPEDL_EXCTL_STATUS_ECS_K 0x00800000 + + +/* + * Executing Context Stack (ECS) level registers + */ + +/** + * @def IX_NPEDL_ECS_BG_CTXT_REG_0 + * @brief Execution Access register address for register 0 at Backgound + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_BG_CTXT_REG_0 0x00 + +/** + * @def IX_NPEDL_ECS_BG_CTXT_REG_1 + * @brief Execution Access register address for register 1 at Backgound + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_BG_CTXT_REG_1 0x01 + +/** + * @def IX_NPEDL_ECS_BG_CTXT_REG_2 + * @brief Execution Access register address for register 2 at Backgound + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_BG_CTXT_REG_2 0x02 + +/** + * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_0 + * @brief Execution Access register address for register 0 at Priority 1 + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04 + +/** + * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_1 + * @brief Execution Access register address for register 1 at Priority 1 + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1 0x05 + +/** + * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_2 + * @brief Execution Access register address for register 2 at Priority 1 + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2 0x06 + +/** + * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_0 + * @brief Execution Access register address for register 0 at Priority 2 + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08 + +/** + * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_1 + * @brief Execution Access register address for register 1 at Priority 2 + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1 0x09 + +/** + * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_2 + * @brief Execution Access register address for register 2 at Priority 2 + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2 0x0A + +/** + * @def IX_NPEDL_ECS_DBG_CTXT_REG_0 + * @brief Execution Access register address for register 0 at Debug + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C + +/** + * @def IX_NPEDL_ECS_DBG_CTXT_REG_1 + * @brief Execution Access register address for register 1 at Debug + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_DBG_CTXT_REG_1 0x0D + +/** + * @def IX_NPEDL_ECS_DBG_CTXT_REG_2 + * @brief Execution Access register address for register 2 at Debug + * Executing Context Stack level + */ +#define IX_NPEDL_ECS_DBG_CTXT_REG_2 0x0E + +/** + * @def IX_NPEDL_ECS_INSTRUCT_REG + * @brief Execution Access register address for NPE Instruction Register + */ +#define IX_NPEDL_ECS_INSTRUCT_REG 0x11 + + +/* + * Execution Access register reset values + */ + +/** + * @def IX_NPEDL_ECS_BG_CTXT_REG_0_RESET + * @brief Reset value for Execution Access Background ECS level register 0 + */ +#define IX_NPEDL_ECS_BG_CTXT_REG_0_RESET 0xA0000000 + +/** + * @def IX_NPEDL_ECS_BG_CTXT_REG_1_RESET + * @brief Reset value for Execution Access Background ECS level register 1 + */ +#define IX_NPEDL_ECS_BG_CTXT_REG_1_RESET 0x01000000 + +/** + * @def IX_NPEDL_ECS_BG_CTXT_REG_2_RESET + * @brief Reset value for Execution Access Background ECS level register 2 + */ +#define IX_NPEDL_ECS_BG_CTXT_REG_2_RESET 0x00008000 + +/** + * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET + * @brief Reset value for Execution Access Priority 1 ECS level register 0 + */ +#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0_RESET 0x20000080 + +/** + * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET + * @brief Reset value for Execution Access Priority 1 ECS level register 1 + */ +#define IX_NPEDL_ECS_PRI_1_CTXT_REG_1_RESET 0x01000000 + +/** + * @def IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET + * @brief Reset value for Execution Access Priority 1 ECS level register 2 + */ +#define IX_NPEDL_ECS_PRI_1_CTXT_REG_2_RESET 0x00008000 + +/** + * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET + * @brief Reset value for Execution Access Priority 2 ECS level register 0 + */ +#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0_RESET 0x20000080 + +/** + * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET + * @brief Reset value for Execution Access Priority 2 ECS level register 1 + */ +#define IX_NPEDL_ECS_PRI_2_CTXT_REG_1_RESET 0x01000000 + +/** + * @def IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET + * @brief Reset value for Execution Access Priority 2 ECS level register 2 + */ +#define IX_NPEDL_ECS_PRI_2_CTXT_REG_2_RESET 0x00008000 + +/** + * @def IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET + * @brief Reset value for Execution Access Debug ECS level register 0 + */ +#define IX_NPEDL_ECS_DBG_CTXT_REG_0_RESET 0x20000000 + +/** + * @def IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET + * @brief Reset value for Execution Access Debug ECS level register 1 + */ +#define IX_NPEDL_ECS_DBG_CTXT_REG_1_RESET 0x00000000 + +/** + * @def IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET + * @brief Reset value for Execution Access Debug ECS level register 2 + */ +#define IX_NPEDL_ECS_DBG_CTXT_REG_2_RESET 0x001E0000 + +/** + * @def IX_NPEDL_ECS_INSTRUCT_REG_RESET + * @brief Reset value for Execution Access NPE Instruction Register + */ +#define IX_NPEDL_ECS_INSTRUCT_REG_RESET 0x1003C00F + + +/* + * masks used to read/write particular bits in Execution Access registers + */ + +/** + * @def IX_NPEDL_MASK_ECS_REG_0_ACTIVE + * @brief Mask the A (Active) bit in Execution Access Register 0 of all ECS + * levels + */ +#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000 + +/** + * @def IX_NPEDL_MASK_ECS_REG_0_NEXTPC + * @brief Mask the NextPC bits in Execution Access Register 0 of all ECS + * levels (except Debug ECS level) + */ +#define IX_NPEDL_MASK_ECS_REG_0_NEXTPC 0x1FFF0000 + +/** + * @def IX_NPEDL_MASK_ECS_REG_0_LDUR + * @brief Mask the LDUR bits in Execution Access Register 0 of all ECS levels + */ +#define IX_NPEDL_MASK_ECS_REG_0_LDUR 0x00000700 + +/** + * @def IX_NPEDL_MASK_ECS_REG_1_CCTXT + * @brief Mask the NextPC bits in Execution Access Register 1 of all ECS levels + */ +#define IX_NPEDL_MASK_ECS_REG_1_CCTXT 0x000F0000 + +/** + * @def IX_NPEDL_MASK_ECS_REG_1_SELCTXT + * @brief Mask the NextPC bits in Execution Access Register 1 of all ECS levels + */ +#define IX_NPEDL_MASK_ECS_REG_1_SELCTXT 0x0000000F + +/** + * @def IX_NPEDL_MASK_ECS_DBG_REG_2_IF + * @brief Mask the IF bit in Execution Access Register 2 of Debug ECS level + */ +#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000 + +/** + * @def IX_NPEDL_MASK_ECS_DBG_REG_2_IE + * @brief Mask the IE bit in Execution Access Register 2 of Debug ECS level + */ +#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000 + + +/* + * Bit-Offsets from LSB of particular bit-fields in Execution Access registers + */ + +/** + * @def IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC + * @brief LSB-offset of NextPC field in Execution Access Register 0 of all ECS + * levels (except Debug ECS level) + */ +#define IX_NPEDL_OFFSET_ECS_REG_0_NEXTPC 16 + +/** + * @def IX_NPEDL_OFFSET_ECS_REG_0_LDUR + * @brief LSB-offset of LDUR field in Execution Access Register 0 of all ECS + * levels + */ +#define IX_NPEDL_OFFSET_ECS_REG_0_LDUR 8 + +/** + * @def IX_NPEDL_OFFSET_ECS_REG_1_CCTXT + * @brief LSB-offset of CCTXT field in Execution Access Register 1 of all ECS + * levels + */ +#define IX_NPEDL_OFFSET_ECS_REG_1_CCTXT 16 + +/** + * @def IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT + * @brief LSB-offset of SELCTXT field in Execution Access Register 1 of all ECS + * levels + */ +#define IX_NPEDL_OFFSET_ECS_REG_1_SELCTXT 0 + + +/* + * NPE core & co-processor instruction templates to load into NPE Instruction + * Register, for read/write of NPE register file registers + */ + +/** + * @def IX_NPEDL_INSTR_RD_REG_BYTE + * @brief NPE Instruction, used to read an 8-bit NPE internal logical register + * and return the value in the EXDATA register (aligned to MSB). + * NPE Assembler instruction: "mov8 d0, d0 &&& DBG_WrExec" + */ +#define IX_NPEDL_INSTR_RD_REG_BYTE 0x0FC00000 + +/** + * @def IX_NPEDL_INSTR_RD_REG_SHORT + * @brief NPE Instruction, used to read a 16-bit NPE internal logical register + * and return the value in the EXDATA register (aligned to MSB). + * NPE Assembler instruction: "mov16 d0, d0 &&& DBG_WrExec" + */ +#define IX_NPEDL_INSTR_RD_REG_SHORT 0x0FC08010 + +/** + * @def IX_NPEDL_INSTR_RD_REG_WORD + * @brief NPE Instruction, used to read a 16-bit NPE internal logical register + * and return the value in the EXDATA register. + * NPE Assembler instruction: "mov32 d0, d0 &&& DBG_WrExec" + */ +#define IX_NPEDL_INSTR_RD_REG_WORD 0x0FC08210 + +/** + * @def IX_NPEDL_INSTR_WR_REG_BYTE + * @brief NPE Immediate-Mode Instruction, used to write an 8-bit NPE internal + * logical register. + * NPE Assembler instruction: "mov8 d0, #0" + */ +#define IX_NPEDL_INSTR_WR_REG_BYTE 0x00004000 + +/** + * @def IX_NPEDL_INSTR_WR_REG_SHORT + * @brief NPE Immediate-Mode Instruction, used to write a 16-bit NPE internal + * logical register. + * NPE Assembler instruction: "mov16 d0, #0" + */ +#define IX_NPEDL_INSTR_WR_REG_SHORT 0x0000C000 + +/** + * @def IX_NPEDL_INSTR_RD_FIFO + * @brief NPE Immediate-Mode Instruction, used to write a 16-bit NPE internal + * logical register. + * NPE Assembler instruction: "cprd32 d0 &&& DBG_RdInFIFO" + */ +#define IX_NPEDL_INSTR_RD_FIFO 0x0F888220 + +/** + * @def IX_NPEDL_INSTR_RESET_MBOX + * @brief NPE Instruction, used to reset Mailbox (MBST) register + * NPE Assembler instruction: "mov32 d0, d0 &&& DBG_ClearM" + */ +#define IX_NPEDL_INSTR_RESET_MBOX 0x0FAC8210 + + +/* + * Bit-offsets from LSB, of particular bit-fields in an NPE instruction + */ + +/** + * @def IX_NPEDL_OFFSET_INSTR_SRC + * @brief LSB-offset to SRC (source operand) field of an NPE Instruction + */ +#define IX_NPEDL_OFFSET_INSTR_SRC 4 + +/** + * @def IX_NPEDL_OFFSET_INSTR_DEST + * @brief LSB-offset to DEST (destination operand) field of an NPE Instruction + */ +#define IX_NPEDL_OFFSET_INSTR_DEST 9 + +/** + * @def IX_NPEDL_OFFSET_INSTR_COPROC + * @brief LSB-offset to COPROC (coprocessor instruction) field of an NPE + * Instruction + */ +#define IX_NPEDL_OFFSET_INSTR_COPROC 18 + + +/* + * masks used to read/write particular bits of an NPE Instruction + */ + +/** + * @def IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA + * @brief Mask the bits of 16-bit data value (least-sig 5 bits) to be used in + * SRC field of immediate-mode NPE instruction + */ +#define IX_NPEDL_MASK_IMMED_INSTR_SRC_DATA 0x1F + +/** + * @def IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA + * @brief Mask the bits of 16-bit data value (most-sig 11 bits) to be used in + * COPROC field of immediate-mode NPE instruction + */ +#define IX_NPEDL_MASK_IMMED_INSTR_COPROC_DATA 0xFFE0 + +/** + * @def IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA + * @brief LSB offset of the bit-field of 16-bit data value (most-sig 11 bits) + * to be used in COPROC field of immediate-mode NPE instruction + */ +#define IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA 5 + +/** + * @def IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA + * @brief Number of left-shifts required to align most-sig 11 bits of 16-bit + * data value into COPROC field of immediate-mode NPE instruction + */ +#define IX_NPEDL_DISPLACE_IMMED_INSTR_COPROC_DATA \ + (IX_NPEDL_OFFSET_INSTR_COPROC - IX_NPEDL_OFFSET_IMMED_INSTR_COPROC_DATA) + +/** + * @def IX_NPEDL_WR_INSTR_LDUR + * @brief LDUR value used with immediate-mode NPE Instructions by the NpeDl + * for writing to NPE internal logical registers + */ +#define IX_NPEDL_WR_INSTR_LDUR 1 + +/** + * @def IX_NPEDL_RD_INSTR_LDUR + * @brief LDUR value used with NON-immediate-mode NPE Instructions by the NpeDl + * for reading from NPE internal logical registers + */ +#define IX_NPEDL_RD_INSTR_LDUR 0 + + +/** + * @enum IxNpeDlCtxtRegNum + * @brief Numeric values to identify the NPE internal Context Store registers + */ +typedef enum +{ + IX_NPEDL_CTXT_REG_STEVT = 0, /**< identifies STEVT */ + IX_NPEDL_CTXT_REG_STARTPC, /**< identifies STARTPC */ + IX_NPEDL_CTXT_REG_REGMAP, /**< identifies REGMAP */ + IX_NPEDL_CTXT_REG_CINDEX, /**< identifies CINDEX */ + IX_NPEDL_CTXT_REG_MAX /**< Total number of Context Store registers */ +} IxNpeDlCtxtRegNum; + + +/* + * NPE Context Store register logical addresses + */ + +/** + * @def IX_NPEDL_CTXT_REG_ADDR_STEVT + * @brief Logical address of STEVT NPE internal Context Store register + */ +#define IX_NPEDL_CTXT_REG_ADDR_STEVT 0x0000001B + +/** + * @def IX_NPEDL_CTXT_REG_ADDR_STARTPC + * @brief Logical address of STARTPC NPE internal Context Store register + */ +#define IX_NPEDL_CTXT_REG_ADDR_STARTPC 0x0000001C + +/** + * @def IX_NPEDL_CTXT_REG_ADDR_REGMAP + * @brief Logical address of REGMAP NPE internal Context Store register + */ +#define IX_NPEDL_CTXT_REG_ADDR_REGMAP 0x0000001E + +/** + * @def IX_NPEDL_CTXT_REG_ADDR_CINDEX + * @brief Logical address of CINDEX NPE internal Context Store register + */ +#define IX_NPEDL_CTXT_REG_ADDR_CINDEX 0x0000001F + + +/* + * NPE Context Store register reset values + */ + +/** + * @def IX_NPEDL_CTXT_REG_RESET_STEVT + * @brief Reset value of STEVT NPE internal Context Store register + * (STEVT = off, 0x80) + */ +#define IX_NPEDL_CTXT_REG_RESET_STEVT 0x80 + +/** + * @def IX_NPEDL_CTXT_REG_RESET_STARTPC + * @brief Reset value of STARTPC NPE internal Context Store register + * (STARTPC = 0x0000) + */ +#define IX_NPEDL_CTXT_REG_RESET_STARTPC 0x0000 + +/** + * @def IX_NPEDL_CTXT_REG_RESET_REGMAP + * @brief Reset value of REGMAP NPE internal Context Store register + * (REGMAP = d0->p0, d8->p2, d16->p4) + */ +#define IX_NPEDL_CTXT_REG_RESET_REGMAP 0x0820 + +/** + * @def IX_NPEDL_CTXT_REG_RESET_CINDEX + * @brief Reset value of CINDEX NPE internal Context Store register + * (CINDEX = 0) + */ +#define IX_NPEDL_CTXT_REG_RESET_CINDEX 0x00 + + +/* + * numeric range of context levels available on an NPE + */ + +/** + * @def IX_NPEDL_CTXT_NUM_MIN + * @brief Lowest NPE Context number in range + */ +#define IX_NPEDL_CTXT_NUM_MIN 0 + +/** + * @def IX_NPEDL_CTXT_NUM_MAX + * @brief Highest NPE Context number in range + */ +#define IX_NPEDL_CTXT_NUM_MAX 15 + + +/* + * Physical NPE internal registers + */ + +/** + * @def IX_NPEDL_TOTAL_NUM_PHYS_REG + * @brief Number of Physical registers currently supported + * Initial NPE implementations will have a 32-word register file. + * Later implementations may have a 64-word register file. + */ +#define IX_NPEDL_TOTAL_NUM_PHYS_REG 32 + +/** + * @def IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP + * @brief LSB-offset of Regmap number in Physical NPE register address, used + * for Physical To Logical register address mapping in the NPE + */ +#define IX_NPEDL_OFFSET_PHYS_REG_ADDR_REGMAP 1 + +/** + * @def IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR + * @brief Mask to extract a logical NPE register address from a physical + * register address, used for Physical To Logical address mapping + */ +#define IX_NPEDL_MASK_PHYS_REG_ADDR_LOGICAL_ADDR 0x1 + +#endif /* IXNPEDLNPEMGRECREGISTERS_P_H */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h new file mode 100644 index 0000000000..a752f26e88 --- /dev/null +++ b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h @@ -0,0 +1,405 @@ +/** + * @file IxNpeDlNpeMgrUtils_p.h + * + * @author Intel Corporation + * @date 18 February 2002 + * @brief This file contains the private API for the NpeMgr module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +/** + * @defgroup IxNpeDlNpeMgrUtils_p IxNpeDlNpeMgrUtils_p + * + * @brief The private API for the IxNpeDl NpeMgr Utils module + * + * @{ + */ + +#ifndef IXNPEDLNPEMGRUTILS_P_H +#define IXNPEDLNPEMGRUTILS_P_H + + +/* + * Put the user defined include files required. + */ +#include "IxNpeDl.h" +#include "IxOsalTypes.h" +#include "IxNpeDlNpeMgrEcRegisters_p.h" + + +/* + * Function Prototypes + */ + +/** + * @fn IX_STATUS ixNpeDlNpeMgrInsMemWrite (UINT32 npeBaseAddress, + UINT32 insMemAddress, + UINT32 insMemData, + BOOL verify) + * + * @brief Writes a word to NPE Instruction memory + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] insMemAddress - NPE instruction memory address to write + * @param UINT32 [in] insMemData - data to write to instruction memory + * @param BOOL [in] verify - if TRUE, verify the memory location is + * written successfully. + * + * This function is used to write a single word of data to a location in NPE + * instruction memory. If the <i>verify</i> option is ON, NpeDl will read back + * from the memory location to verify that it was written successfully + * + * @pre + * + * @post + * + * @return + * - IX_FAIL if verify is TRUE and the memory location was not written + * successfully + * - IX_SUCCESS otherwise + */ +IX_STATUS +ixNpeDlNpeMgrInsMemWrite (UINT32 npeBaseAddress, UINT32 insMemAddress, + UINT32 insMemData, BOOL verify); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrDataMemWrite (UINT32 npeBaseAddress, + UINT32 dataMemAddress, + UINT32 dataMemData, + BOOL verify) + * + * @brief Writes a word to NPE Data memory + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] dataMemAddress - NPE data memory address to write + * @param UINT32 [in] dataMemData - data to write to NPE data memory + * @param BOOL [in] verify - if TRUE, verify the memory location is + * written successfully. + * + * This function is used to write a single word of data to a location in NPE + * data memory. If the <i>verify</i> option is ON, NpeDl will read back from + * the memory location to verify that it was written successfully + * + * @pre + * + * @post + * + * @return + * - IX_FAIL if verify is TRUE and the memory location was not written + * successfully + * - IX_SUCCESS otherwise + */ +IX_STATUS +ixNpeDlNpeMgrDataMemWrite (UINT32 npeBaseAddress, UINT32 dataMemAddress, + UINT32 dataMemData, BOOL verify); + + +/** + * @fn void ixNpeDlNpeMgrExecAccRegWrite (UINT32 npeBaseAddress, + UINT32 regAddress, + UINT32 regData) + * + * @brief Writes a word to an NPE Execution Access register + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] regAddress - NPE Execution Access register address + * @param UINT32 [in] regData - data to write to register + * + * This function is used to write a single word of data to an NPE Execution + * Access register. + * + * @pre + * + * @post + * + * @return none + */ +void +ixNpeDlNpeMgrExecAccRegWrite (UINT32 npeBaseAddress, UINT32 regAddress, + UINT32 regData); + + +/** + * @fn UINT32 ixNpeDlNpeMgrExecAccRegRead (UINT32 npeBaseAddress, + UINT32 regAddress) + * + * @brief Reads the contents of an NPE Execution Access register + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] regAddress - NPE Execution Access register address + * + * This function is used to read the contents of an NPE Execution + * Access register. + * + * @pre + * + * @post + * + * @return The value read from the Execution Access register + */ +UINT32 +ixNpeDlNpeMgrExecAccRegRead (UINT32 npeBaseAddress, UINT32 regAddress); + + +/** + * @fn void ixNpeDlNpeMgrCommandIssue (UINT32 npeBaseAddress, + UINT32 command) + * + * @brief Issues an NPE Execution Control command + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] command - Command to issue + * + * This function is used to issue a stand-alone NPE Execution Control command + * (e.g. command to Stop NPE execution) + * + * @pre + * + * @post + * + * @return none + */ +void +ixNpeDlNpeMgrCommandIssue (UINT32 npeBaseAddress, UINT32 command); + + +/** + * @fn void ixNpeDlNpeMgrDebugInstructionPreExec (UINT32 npeBaseAddress) + * + * @brief Prepare to executes one or more NPE instructions in the Debug + * Execution Stack level. + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * + * This function should be called once before a sequence of calls to + * ixNpeDlNpeMgrDebugInstructionExec(). + * + * @pre + * + * @post + * - ixNpeDlNpeMgrDebugInstructionPostExec() should be called to restore + * registers values altered by this function + * + * @return none + */ +void +ixNpeDlNpeMgrDebugInstructionPreExec (UINT32 npeBaseAddress); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrDebugInstructionExec (UINT32 npeBaseAddress, + UINT32 npeInstruction, + UINT32 ctxtNum, + UINT32 ldur) + * + * @brief Executes a single instruction on the NPE at the Debug Execution Stack + * level + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] npeInstruction - Value to write to INSTR (Instruction) + * register + * @param UINT32 [in] ctxtNum - context the instruction will be executed + * in and which context store it may access + * @param UINT32 [in] ldur - Long Immediate Duration, set to non-zero + * to use long-immediate mode instruction + * + * This function is used to execute a single instruction in the NPE pipeline at + * the debug Execution Context Stack level. It won't disturb the state of other + * executing contexts. Its useful for performing NPE operations, such as + * writing to NPE Context Store registers and physical registers, that cannot + * be carried out directly using the Configuration Bus registers. This function + * will return TIMEOUT status if NPE not responding due to NPS is hang / halt. + * + * @pre + * - The NPE should be stopped and in a clean state + * - ixNpeDlNpeMgrDebugInstructionPreExec() should be called once before + * a sequential of 1 or more calls to this function + * + * @post + * - ixNpeDlNpeMgrDebugInstructionPostExec() should be called after + * a sequence of calls to this function + * + * @return + * - IX_NPEDL_CRITICAL_NPE_ERR if execution of instruction failed / timeout + * - IX_SUCCESS otherwise + */ +IX_STATUS +ixNpeDlNpeMgrDebugInstructionExec (UINT32 npeBaseAddress, + UINT32 npeInstruction, + UINT32 ctxtNum, UINT32 ldur); + + +/** + * @fn void ixNpeDlNpeMgrDebugInstructionPostExec (UINT32 npeBaseAddress) + * + * @brief Clean up after executing one or more NPE instructions in the + * Debug Stack Level + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * + * This function should be called once following a sequence of calls to + * ixNpeDlNpeMgrDebugInstructionExec(). + * + * @pre + * - ixNpeDlNpeMgrDebugInstructionPreExec() was called earlier + * + * @post + * - The Instruction Pipeline will cleared + * + * @return none + */ +void +ixNpeDlNpeMgrDebugInstructionPostExec (UINT32 npeBaseAddress); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrPhysicalRegWrite (UINT32 npeBaseAddress, + UINT32 regAddr, + UINT32 regValue, + BOOL verify) + * + * @brief Write one of the 32* 32-bit physical registers in the NPE data + * register file + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] regAddr - number of the physical register (0-31)* + * @param UINT32 [in] regValue - value to write to the physical register + * @param BOOL [in] verify - if TRUE, verify the register is written + * successfully. + * + * This function writes a physical register in the NPE data register file. + * If the <i>verify</i> option is ON, NpeDl will read back the register to + * verify that it was written successfully + * *Note that release 1.0 of this software supports 32 physical + * registers, but 64 may be supported in future versions. + * + * @pre + * - The NPE should be stopped and in a clean state + * - ixNpeDlNpeMgrDebugInstructionPreExec() should be called once before + * a sequential of 1 or more calls to this function + * + * @post + * - Contents of REGMAP Context Store register for Context 0 will be altered + * - ixNpeDlNpeMgrDebugInstructionPostExec() should be called after + * a sequence of calls to this function + * + * @return + * - IX_FAIL if verify is TRUE and the Context Register was not written + * successfully + * - IX_SUCCESS if Context Register was written successfully + * - IX_NPEDL_CRITICAL_NPE_ERR if Context Register was not written + * successfully due to timeout error where NPE is not responding + */ +IX_STATUS +ixNpeDlNpeMgrPhysicalRegWrite (UINT32 npeBaseAddress, UINT32 regAddr, + UINT32 regValue, BOOL verify); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrCtxtRegWrite (UINT32 npeBaseAddress, + UINT32 ctxtNum, + IxNpeDlCtxtRegNum ctxtReg, + UINT32 ctxtRegVal, + BOOL verify) + * + * @brief Writes a value to a Context Store register on an NPE + * + * @param UINT32 [in] npeBaseAddress - Base Address of NPE + * @param UINT32 [in] ctxtNum - context store to access + * @param IxNpeDlCtxtRegNum [in] ctxtReg - which Context Store reg to write + * @param UINT32 [in] ctxtRegVal - value to write to the Context Store + * register + * @param BOOL [in] verify - if TRUE, verify the register is + * written successfully. + * + * This function writes the contents of a Context Store register in the NPE + * register file. If the <i>verify</i> option is ON, NpeDl will read back the + * register to verify that it was written successfully + * + * @pre + * - The NPE should be stopped and in a clean state + * - ixNpeDlNpeMgrDebugInstructionPreExec() should be called once before + * a sequential of 1 or more calls to this function + * + * @post + * - ixNpeDlNpeMgrDebugInstructionPostExec() should be called after + * a sequence of calls to this function + * + * @return + * - IX_FAIL if verify is TRUE and the Context Register was not written + * successfully + * - IX_SUCCESS if Context Register was written successfully + * - IX_NPEDL_CRITICAL_NPE_ERR if Context Register was not written + * successfully due to timeout error where NPE is not responding + */ +IX_STATUS +ixNpeDlNpeMgrCtxtRegWrite (UINT32 npeBaseAddress, UINT32 ctxtNum, + IxNpeDlCtxtRegNum ctxtReg, UINT32 ctxtRegVal, + BOOL verify); + + +/** + * @fn void ixNpeDlNpeMgrUtilsStatsShow (void) + * + * @brief This function will display the statistics of the IxNpeDl NpeMgrUtils + * module + * + * @return none + */ +void +ixNpeDlNpeMgrUtilsStatsShow (void); + + +/** + * @fn void ixNpeDlNpeMgrUtilsStatsReset (void) + * + * @brief This function will reset the statistics of the IxNpeDl NpeMgrUtils + * module + * + * @return none + */ +void +ixNpeDlNpeMgrUtilsStatsReset (void); + + +#endif /* IXNPEDLNPEMGRUTILS_P_H */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h new file mode 100644 index 0000000000..b7fb0f0217 --- /dev/null +++ b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h @@ -0,0 +1,260 @@ +/** + * @file IxNpeDlNpeMgr_p.h + * + * @author Intel Corporation + * @date 14 December 2001 + * @brief This file contains the private API for the NpeMgr module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + + +/** + * @defgroup IxNpeDlNpeMgr_p IxNpeDlNpeMgr_p + * + * @brief The private API for the IxNpeDl NpeMgr module + * + * @{ + */ + +#ifndef IXNPEDLNPEMGR_P_H +#define IXNPEDLNPEMGR_P_H + + +/* + * Put the user defined include files required. + */ +#include "IxNpeDl.h" +#include "IxOsalTypes.h" + + +/* + * Function Prototypes + */ + + +/** + * @fn void ixNpeDlNpeMgrInit (void) + * + * @brief Initialises the NpeMgr module + * + * @param none + * + * This function initialises the NpeMgr module. + * It should be called before any other function in this module is called. + * It only needs to be called once, but can be called multiple times safely. + * The code will ASSERT on failure. + * + * @pre + * - It must be called before any other function in this module + * + * @post + * - NPE Configuration Register memory space will be mapped using + * IxOsal. This memory will not be unmapped by this module. + * + * @return none + */ +void +ixNpeDlNpeMgrInit (void); + + +/** + * @fn IX_STATUS ixNpeMhNpeMgrUninit (void) + * + * @brief This function will uninitialise the IxNpeDlNpeMgr sub-component. + * + * This function will uninitialise the IxNpeDlNpeMgr sub-component. + * It should only be called once, and only if the IxNpeDlNpeMgr sub-component + * has already been initialised by calling @ref ixNpeDlNpeMgrInit(). + * No other IxNpeDlNpeMgr sub-component API functions should be called + * until @ref ixNpeDlNpeMgrInit() is called again. + * If possible, this function should be called before a soft reboot or unloading + * a kernel module to perform any clean up operations required for IxNpeMh. + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ + +IX_STATUS ixNpeDlNpeMgrUninit (void); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, + UINT32 *imageCodePtr, + BOOL verify) + * + * @brief Loads a image of microcode onto an NPE + * + * @param IxNpeDlNpeId [in] npeId - Id of target NPE + * @param UINT32* [in] imageCodePtr - pointer to image code in image to be + * downloaded + * @param BOOL [in] verify - if TRUE, verify each word written to + * NPE memory. + * + * This function loads a image containing blocks of microcode onto a + * particular NPE. If the <i>verify</i> option is ON, NpeDl will read back each + * word written and verify that it was written successfully + * + * @pre + * - The NPE should be stopped beforehand + * + * @post + * - The NPE Instruction Pipeline may be flushed clean + * + * @return + * - IX_SUCCESS if the download was successful + * - IX_FAIL if the download failed + * - IX_NPEDL_CRITICAL_NPE_ERR if the download failed due to timeout error + * where NPE is not responding + */ +IX_STATUS +ixNpeDlNpeMgrImageLoad (IxNpeDlNpeId npeId, UINT32 *imageCodePtr, + BOOL verify); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId) + * + * @brief sets a NPE to RESET state + * + * @param IxNpeDlNpeId [in] npeId - id of target NPE + * + * This function performs a soft NPE reset by writing reset values to the + * Configuration Bus Execution Control registers, the Execution Context Stack + * registers, the Physical Register file, and the Context Store registers for + * each context number. It also clears inFIFO, outFIFO and Watchpoint FIFO. + * It does not reset NPE Co-processors. + * + * @pre + * - The NPE should be stopped beforehand + * + * @post + * - NPE NextProgram Counter (NextPC) will be set to a fixed initial value, + * such as 0. This should be explicitly set by downloading State + * Information before starting NPE Execution. + * - The NPE Instruction Pipeline will be in a clean state. + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL if the operation failed + * - IX_NPEDL_CRITICAL_NPE_ERR if the operation failed due to NPE hang + */ +IX_STATUS +ixNpeDlNpeMgrNpeReset (IxNpeDlNpeId npeId); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId) + * + * @brief Starts NPE Execution + * + * @param IxNpeDlNpeId [in] npeId - Id of target NPE + * + * Ensures only background Execution Stack Level is Active, clears instruction + * pipeline, and starts Execution on a NPE by sending a Start NPE command to + * the NPE. Checks the execution status of the NPE to verify that it is + * running. + * + * @pre + * - The NPE should be stopped beforehand. + * - Note that this function does not set the NPE Next Program Counter + * (NextPC), so it should be set beforehand if required by downloading + * appropriate State Information. + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ +IX_STATUS +ixNpeDlNpeMgrNpeStart (IxNpeDlNpeId npeId); + + +/** + * @fn IX_STATUS ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId) + * + * @brief Halts NPE Execution + * + * @param IxNpeDlNpeId [in] npeId - id of target NPE + * + * Stops execution on an NPE by sending a Stop NPE command to the NPE. + * Checks the execution status of the NPE to verify that it has stopped. + * + * @pre + * + * @post + * + * @return + * - IX_SUCCESS if the operation was successful + * - IX_FAIL otherwise + */ +IX_STATUS +ixNpeDlNpeMgrNpeStop (IxNpeDlNpeId npeId); + + +/** + * @fn void ixNpeDlNpeMgrStatsShow (void) + * + * @brief This function will display statistics of the IxNpeDl NpeMgr module + * + * @return none + */ +void +ixNpeDlNpeMgrStatsShow (void); + + +/** + * @fn void ixNpeDlNpeMgrStatsReset (void) + * + * @brief This function will reset the statistics of the IxNpeDl NpeMgr module + * + * @return none + */ +void +ixNpeDlNpeMgrStatsReset (void); + + +#endif /* IXNPEDLIMAGEMGR_P_H */ + +/** + * @} defgroup IxNpeDlNpeMgr_p + */ diff --git a/drivers/net/npe/include/IxNpeMh.h b/drivers/net/npe/include/IxNpeMh.h new file mode 100644 index 0000000000..20ee38b062 --- /dev/null +++ b/drivers/net/npe/include/IxNpeMh.h @@ -0,0 +1,497 @@ +/** + * @file IxNpeMh.h + * + * @date 14 Dec 2001 + * + * @brief This file contains the public API for the IXP400 NPE Message + * Handler component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMh IXP400 NPE Message Handler (IxNpeMh) API + * + * @brief The public API for the IXP400 NPE Message Handler component. + * + * @{ + */ + +#ifndef IXNPEMH_H +#define IXNPEMH_H + +#include "IxOsalTypes.h" + +/* + * #defines for function return types, etc. + */ + +#define IX_NPEMH_MIN_MESSAGE_ID (0x00) /**< minimum valid message ID */ +#define IX_NPEMH_MAX_MESSAGE_ID (0xFF) /**< maximum valid message ID */ + +#define IX_NPEMH_SEND_RETRIES_DEFAULT (3) /**< default msg send retries */ + + +/** + * @def IX_NPEMH_CRITICAL_NPE_ERR + * + * @brief NpeMH function return value for a Critical NPE error occuring during + sending/receiving message. Assume NPE hang / halt if this value is + returned. + */ +#define IX_NPEMH_CRITICAL_NPE_ERR 2 + +/** + * @enum IxNpeMhNpeId + * + * @brief The ID of a particular NPE. + * @note In this context, for IXP425 Silicon (B0):<br> + * - NPE-A has HDLC, HSS, AAL and UTOPIA Coprocessors.<br> + * - NPE-B has Ethernet Coprocessor.<br> + * - NPE-C has Ethernet, AES, DES and HASH Coprocessors.<br> + * - IXP400 Product Line have different combinations of coprocessors. + */ + +typedef enum +{ + IX_NPEMH_NPEID_NPEA = 0, /**< ID for NPE-A */ + IX_NPEMH_NPEID_NPEB, /**< ID for NPE-B */ + IX_NPEMH_NPEID_NPEC, /**< ID for NPE-C */ + IX_NPEMH_NUM_NPES /**< Number of NPEs */ +} IxNpeMhNpeId; + +/** + * @enum IxNpeMhNpeInterrupts + * + * @brief Indicator specifying whether or not NPE interrupts should drive + * receiving of messages from the NPEs. + */ + +typedef enum +{ + IX_NPEMH_NPEINTERRUPTS_NO = 0, /**< Don't use NPE interrupts */ + IX_NPEMH_NPEINTERRUPTS_YES /**< Do use NPE interrupts */ +} IxNpeMhNpeInterrupts; + +/** + * @brief The 2-word message structure to send to and receive from the + * NPEs. + */ + +typedef struct +{ + UINT32 data[2]; /**< the actual data of the message */ +} IxNpeMhMessage; + +/** message ID */ +typedef UINT32 IxNpeMhMessageId; + +/** + * @typedef IxNpeMhCallback + * + * @brief This prototype shows the format of a message callback function. + * + * This prototype shows the format of a message callback function. The + * message callback will be passed the message to be handled and will also + * be told from which NPE the message was received. The message callback + * will either be registered by ixNpeMhUnsolicitedCallbackRegister() or + * passed as a parameter to ixNpeMhMessageWithResponseSend(). It will be + * called from within an ISR triggered by the NPE's "outFIFO not empty" + * interrupt (see ixNpeMhInitialize()). The parameters passed are the ID + * of the NPE that the message was received from, and the message to be + * handled.<P><B>Re-entrancy:</B> This function is only a prototype, and + * will be implemented by the client. It does not need to be re-entrant. + */ + +typedef void (*IxNpeMhCallback) (IxNpeMhNpeId, IxNpeMhMessage); + +/* + * Prototypes for interface functions. + */ + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhInitialize ( + IxNpeMhNpeInterrupts npeInterrupts) + * + * @brief This function will initialise the IxNpeMh component. + * + * @param npeInterrupts @ref IxNpeMhNpeInterrupts [in] - This parameter + * dictates whether or not the IxNpeMh component will service NPE "outFIFO + * not empty" interrupts to trigger receiving and processing of messages + * from the NPEs. If not then the client must use ixNpeMhMessagesReceive() + * to control message receiving and processing. + * + * This function will initialise the IxNpeMh component. It should only be + * called once, prior to using the IxNpeMh component. The following + * actions will be performed by this function:<OL><LI>Initialization of + * internal data structures (e.g. solicited and unsolicited callback + * tables).</LI><LI>Configuration of the interface with the NPEs (e.g. + * enabling of NPE "outFIFO not empty" interrupts).</LI><LI>Registration of + * ISRs that will receive and handle messages when the NPEs' "outFIFO not + * empty" interrupts fire (if npeInterrupts equals + * IX_NPEMH_NPEINTERRUPTS_YES).</LI></OL> + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhInitialize ( + IxNpeMhNpeInterrupts npeInterrupts); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhUnload (void) + * + * @brief This function will uninitialise the IxNpeMh component. + * + * This function will uninitialise the IxNpeMh component. It should only be + * called once, and only if the IxNpeMh component has already been initialised. + * No other IxNpeMh API functions should be called until @ref ixNpeMhInitialize + * is called again. + * If possible, this function should be called before a soft reboot or unloading + * a kernel module to perform any clean up operations required for IxNpeMh. + * + * The following actions will be performed by this function: + * <OL><LI>Unmapping of kernel memory mapped by the function + * @ref ixNpeMhInitialize.</LI></OL> + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhUnload (void); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhUnsolicitedCallbackRegister ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId messageId, + IxNpeMhCallback unsolicitedCallback) + * + * @brief This function will register an unsolicited callback for a + * particular NPE and message ID. + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE whose messages + * the unsolicited callback will handle. + * @param messageId @ref IxNpeMhMessageId [in] - The ID of the messages the + * unsolicited callback will handle. + * @param unsolicitedCallback @ref IxNpeMhCallback [in] - The unsolicited + * callback function. A value of NULL will deregister any previously + * registered callback for this NPE and message ID. + * + * This function will register an unsolicited message callback for a + * particular NPE and message ID.<P>If an unsolicited callback is already + * registered for the specified NPE and message ID then the callback will + * be overwritten. Only one client will be responsible for handling a + * particular message ID associated with a NPE. Registering a NULL + * unsolicited callback will deregister any previously registered + * callback.<P>The callback function will be called from an ISR that will + * be triggered by the NPE's "outFIFO not empty" interrupt (see + * ixNpeMhInitialize()) to handle any unsolicited messages of the specific + * message ID received from the NPE. Unsolicited messages will be handled + * in the order they are received.<P>If no unsolicited callback can be + * found for a received message then it is assumed that the message is + * solicited.<P>If more than one client may be interested in a particular + * unsolicited message then the suggested strategy is to register a + * callback for the message that can itself distribute the message to + * multiple clients as necessary.<P>See also + * ixNpeMhUnsolicitedCallbackForRangeRegister().<P><B>Re-entrancy:</B> This + * function will be callable from any thread at any time. IxOsal + * will be used for any necessary resource protection. + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackRegister ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId messageId, + IxNpeMhCallback unsolicitedCallback); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId minMessageId, + IxNpeMhMessageId maxMessageId, + IxNpeMhCallback unsolicitedCallback) + * + * @brief This function will register an unsolicited callback for a + * particular NPE and range of message IDs. + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE whose messages the + * unsolicited callback will handle. + * @param minMessageId @ref IxNpeMhMessageId [in] - The minimum message ID in + * the range of message IDs the unsolicited callback will handle. + * @param maxMessageId @ref IxNpeMhMessageId [in] - The maximum message ID in + * the range of message IDs the unsolicited callback will handle. + * @param unsolicitedCallback @ref IxNpeMhCallback [in] - The unsolicited + * callback function. A value of NULL will deregister any previously + * registered callback(s) for this NPE and range of message IDs. + * + * This function will register an unsolicited callback for a particular NPE + * and range of message IDs. It is a convenience function that is + * effectively the same as calling ixNpeMhUnsolicitedCallbackRegister() for + * each ID in the specified range. See + * ixNpeMhUnsolicitedCallbackRegister() for more + * information.<P><B>Re-entrancy:</B> This function will be callable from + * any thread at any time. IxOsal will be used for any necessary + * resource protection. + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhUnsolicitedCallbackForRangeRegister ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId minMessageId, + IxNpeMhMessageId maxMessageId, + IxNpeMhCallback unsolicitedCallback); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhMessageSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + UINT32 maxSendRetries) + * + * @brief This function will send a message to a particular NPE. + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to send the message + * to. + * @param message @ref IxNpeMhMessage [in] - The message to send. + * @param maxSendRetries UINT32 [in] - Max num. of retries to perform + * if the NPE's inFIFO is full. + * + * This function will send a message to a particular NPE. It will be the + * client's responsibility to ensure that the message is properly formed. + * The return status will signify to the client if the message was + * successfully sent or not.<P>If the message is sent to the NPE then this + * function will return a status of success. Note that this will only mean + * the message has been placed in the NPE's inFIFO. There will be no way + * of knowing that the NPE has actually read the message, but once in the + * incoming message queue it will be safe to assume that the NPE will + * process it. + * <P>The inFIFO may fill up sometimes if the Xscale is sending messages + * faster than the NPE can handle them. This forces us to retry attempts + * to send the message until the NPE services the inFIFO. The client should + * specify a ceiling value for the number of retries suitable to their + * needs. IX_NPEMH_SEND_RETRIES_DEFAULT can be used as a default value for + * the <i>maxSendRetries</i> parameter for this function. Each retry + * exceeding this default number will incur a blocking delay of 1 microsecond, + * to avoid consuming too much AHB bus bandwidth while performing retries. + * <P>Note this function <B>must</B> only be used for messages. + * that do not solicit responses. If the message being sent will solicit a + * response then the ixNpeMhMessageWithResponseSend() function <B>must</B> + * be used to ensure that the response is correctly + * handled. <P> This function will return timeout status if NPE hang / halt + * while sending message. The timeout error is not related to the + * <i>maxSendRetries</i> as mentioned above. The timeout error will only occur + * if the first word of the message has been sent to NPE (not exceeding + * <i>maxSendRetries</i> when sending 1st message word), but the second word of + * the message can't be written to NPE's inFIFO due to NPE hang / halt after + * maximum waiting time (IX_NPE_MH_MAX_NUM_OF_RETRIES). + * <P><B>Re-entrancy:</B> This function will be callable from any + * thread at any time. IxOsal will be used for any necessary + * resource protection. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +PUBLIC IX_STATUS ixNpeMhMessageSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + UINT32 maxSendRetries); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhMessageWithResponseSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback, + UINT32 maxSendRetries) + * + * @brief This function is equivalent to the ixNpeMhMessageSend() function, + * but must be used when the message being sent will solicited a response. + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to send the message + * to. + * @param message @ref IxNpeMhMessage [in] - The message to send. + * @param solicitedMessageId @ref IxNpeMhMessageId [in] - The ID of the + * solicited response message. + * @param solicitedCallback @ref IxNpeMhCallback [in] - The function to use to + * pass the response message back to the client. A value of NULL will + * cause the response message to be discarded. + * @param maxSendRetries UINT32 [in] - Max num. of retries to perform + * if the NPE's inFIFO is full. + * + * This function is equivalent to the ixNpeMhMessageSend() function, but + * must be used when the message being sent will solicited a + * response.<P>The client must specify the ID of the solicited response + * message to allow the response to be recognised when it is received. The + * client must also specify a callback function to handle the received + * response. The IxNpeMh component will not offer the facility to send a + * message to a NPE and receive a response within the same context.<P>Note + * if the client is not interested in the response, specifying a NULL + * callback will cause the response message to be discarded.<P>The + * solicited callback will be stored and called some time later from an ISR + * that will be triggered by the NPE's "outFIFO not empty" interrupt (see + * ixNpeMhInitialize()) to handle the response message corresponding to the + * message sent. Response messages will be handled in the order they are + * received.<P> + * <P>The inFIFO may fill up sometimes if the Xscale is sending messages + * faster than the NPE can handle them. This forces us to retry attempts + * to send the message until the NPE services the inFIFO. The client should + * specify a ceiling value for the number of retries suitable to their + * needs. IX_NPEMH_SEND_RETRIES_DEFAULT can be used as a default value for + * the <i>maxSendRetries</i> parameter for this function. Each retry + * exceeding this default number will incur a blocking delay of 1 microsecond, + * to avoid consuming too much AHB bus bandwidth while performing retries. + * <P> This function will return timeout status if NPE hang / halt + * while sending message. The timeout error is not related to the + * <i>maxSendRetries</i> as mentioned above. The timeout error will only occur + * if the first word of the message has been sent to NPE (not exceeding + * <i>maxSendRetries</i> when sending 1st message word), but the second word of + * the message can't be written to NPE's inFIFO due to NPE hang / halt after + * maximum waiting time (IX_NPE_MH_MAX_NUM_OF_RETRIES). + * <P><B>Re-entrancy:</B> This function will be callable from any + * thread at any time. IxOsal will be used for any necessary + * resource protection. + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhMessageWithResponseSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback, + UINT32 maxSendRetries); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhMessagesReceive ( + IxNpeMhNpeId npeId) + * + * @brief This function will receive messages from a particular NPE and + * pass each message to the client via a solicited callback (for solicited + * messages) or an unsolicited callback (for unsolicited messages). + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to receive and + * process messages from. + * + * This function will receive messages from a particular NPE and pass each + * message to the client via a solicited callback (for solicited messages) + * or an unsolicited callback (for unsolicited messages).<P>If the IxNpeMh + * component is initialised to service NPE "outFIFO not empty" interrupts + * (see ixNpeMhInitialize()) then there is no need to call this function. + * This function is only provided as an alternative mechanism to control + * the receiving and processing of messages from the NPEs.<P> This function + * will return timeout status if NPE hang / halt while receiving message. The + * timeout error will only occur if this function has read the first word of + * the message and can't read second word of the message from NPE's outFIFO + * after maximum retries (IX_NPE_MH_MAX_NUM_OF_RETRIES). + * <P>Note this function cannot be called from within + * an ISR as it will use resource protection mechanisms.<P><B>Re-entrancy:</B> + * This function will be callable from any thread at any time. IxOsal will be + * used for any necessary resource protection. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +PUBLIC IX_STATUS ixNpeMhMessagesReceive ( + IxNpeMhNpeId npeId); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhShow ( + IxNpeMhNpeId npeId) + * + * @brief This function will display the current state of the IxNpeMh + * component. + * + * <B>Re-entrancy:</B> This function will be callable from + * any thread at any time. However, no resource protection will be used + * so as not to impact system performance. As this function is only + * reading statistical information then this is acceptable. + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to display state + * information for. + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhShow ( + IxNpeMhNpeId npeId); + +/** + * @ingroup IxNpeMh + * + * @fn IX_STATUS ixNpeMhShowReset ( + IxNpeMhNpeId npeId) + * + * @brief This function will reset the current state of the IxNpeMh + * component. + * + * <B>Re-entrancy:</B> This function will be callable from + * any thread at any time. However, no resource protection will be used + * so as not to impact system performance. As this function is only + * writing statistical information then this is acceptable. + * + * @param npeId @ref IxNpeMhNpeId [in] - The ID of the NPE to reset state + * information for. + * + * @return The function returns a status indicating success or failure. + */ + +PUBLIC IX_STATUS ixNpeMhShowReset ( + IxNpeMhNpeId npeId); + +#endif /* IXNPEMH_H */ + +/** + * @} defgroup IxNpeMh + */ diff --git a/drivers/net/npe/include/IxNpeMhConfig_p.h b/drivers/net/npe/include/IxNpeMhConfig_p.h new file mode 100644 index 0000000000..375b3468e6 --- /dev/null +++ b/drivers/net/npe/include/IxNpeMhConfig_p.h @@ -0,0 +1,555 @@ +/** + * @file IxNpeMhConfig_p.h + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the private API for the Configuration module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMhConfig_p IxNpeMhConfig_p + * + * @brief The private API for the Configuration module. + * + * @{ + */ + +#ifndef IXNPEMHCONFIG_P_H +#define IXNPEMHCONFIG_P_H + +#include "IxOsal.h" + +#include "IxNpeMh.h" +#include "IxNpeMhMacros_p.h" + +/* + * inline definition + */ +/* enable function inlining for performances */ +#ifdef IXNPEMHSOLICITEDCBMGR_C +/* Non-inline functions will be defined in this translation unit. + Reason is that in GNU Compiler, if the Optimization is turn off, all extern inline + functions will not be compiled. +*/ +# ifndef __wince +# ifndef IXNPEMHCONFIG_INLINE +# define IXNPEMHCONFIG_INLINE +# endif +# else +# ifndef IXNPEMHCONFIG_INLINE +# define IXNPEMHCONFIG_INLINE IX_OSAL_INLINE_EXTERN +# endif +# endif /* __wince*/ + +#else + +# ifndef IXNPEMHCONFIG_INLINE +# define IXNPEMHCONFIG_INLINE IX_OSAL_INLINE_EXTERN +# endif /* IXNPEMHCONFIG_INLINE */ +#endif /* IXNPEMHSOLICITEDCBMGR_C */ +/* + * Typedefs and #defines, etc. + */ + +typedef void (*IxNpeMhConfigIsr) (int); /**< ISR function pointer */ + +/** + * @struct IxNpeMhConfigNpeInfo + * + * @brief This structure is used to maintain the configuration information + * associated with an NPE. + */ + +typedef struct +{ + IxOsalMutex mutex; /**< mutex */ + UINT32 interruptId; /**< interrupt ID */ + UINT32 virtualRegisterBase; /**< register virtual base address */ + UINT32 statusRegister; /**< status register virtual address */ + UINT32 controlRegister; /**< control register virtual address */ + UINT32 inFifoRegister; /**< inFIFO register virutal address */ + UINT32 outFifoRegister; /**< outFIFO register virtual address */ + IxNpeMhConfigIsr isr; /**< isr routine for handling interrupt */ + BOOL oldInterruptState; /**< old interrupt state (TRUE => enabled) */ +} IxNpeMhConfigNpeInfo; + + +/* + * #defines for function return types, etc. + */ + +/**< NPE register base address */ +#define IX_NPEMH_NPE_BASE (IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE) + +#define IX_NPEMH_NPEA_OFFSET (0x6000) /**< NPE-A register base offset */ +#define IX_NPEMH_NPEB_OFFSET (0x7000) /**< NPE-B register base offset */ +#define IX_NPEMH_NPEC_OFFSET (0x8000) /**< NPE-C register base offset */ + +#define IX_NPEMH_NPESTAT_OFFSET (0x002C) /**< NPE status register offset */ +#define IX_NPEMH_NPECTL_OFFSET (0x0030) /**< NPE control register offset */ +#define IX_NPEMH_NPEFIFO_OFFSET (0x0038) /**< NPE FIFO register offset */ + +/** NPE-A register base address */ +#define IX_NPEMH_NPEA_BASE (IX_NPEMH_NPE_BASE + IX_NPEMH_NPEA_OFFSET) +/** NPE-B register base address */ +#define IX_NPEMH_NPEB_BASE (IX_NPEMH_NPE_BASE + IX_NPEMH_NPEB_OFFSET) +/** NPE-C register base address */ +#define IX_NPEMH_NPEC_BASE (IX_NPEMH_NPE_BASE + IX_NPEMH_NPEC_OFFSET) + +/* NPE-A configuration */ + +/** NPE-A interrupt */ +#define IX_NPEMH_NPEA_INT (IX_OSAL_IXP400_NPEA_IRQ_LVL) +/** NPE-A FIFO register */ +#define IX_NPEMH_NPEA_FIFO (IX_NPEMH_NPEA_BASE + IX_NPEMH_NPEFIFO_OFFSET) +/** NPE-A control register */ +#define IX_NPEMH_NPEA_CTL (IX_NPEMH_NPEA_BASE + IX_NPEMH_NPECTL_OFFSET) +/** NPE-A status register */ +#define IX_NPEMH_NPEA_STAT (IX_NPEMH_NPEA_BASE + IX_NPEMH_NPESTAT_OFFSET) + +/* NPE-B configuration */ + +/** NPE-B interrupt */ +#define IX_NPEMH_NPEB_INT (IX_OSAL_IXP400_NPEB_IRQ_LVL) +/** NPE-B FIFO register */ +#define IX_NPEMH_NPEB_FIFO (IX_NPEMH_NPEB_BASE + IX_NPEMH_NPEFIFO_OFFSET) +/** NPE-B control register */ +#define IX_NPEMH_NPEB_CTL (IX_NPEMH_NPEB_BASE + IX_NPEMH_NPECTL_OFFSET) +/** NPE-B status register */ +#define IX_NPEMH_NPEB_STAT (IX_NPEMH_NPEB_BASE + IX_NPEMH_NPESTAT_OFFSET) + +/* NPE-C configuration */ + +/** NPE-C interrupt */ +#define IX_NPEMH_NPEC_INT (IX_OSAL_IXP400_NPEC_IRQ_LVL) +/** NPE-C FIFO register */ +#define IX_NPEMH_NPEC_FIFO (IX_NPEMH_NPEC_BASE + IX_NPEMH_NPEFIFO_OFFSET) +/** NPE-C control register */ +#define IX_NPEMH_NPEC_CTL (IX_NPEMH_NPEC_BASE + IX_NPEMH_NPECTL_OFFSET) +/** NPE-C status register */ +#define IX_NPEMH_NPEC_STAT (IX_NPEMH_NPEC_BASE + IX_NPEMH_NPESTAT_OFFSET) + +/* NPE control register bit definitions */ +#define IX_NPEMH_NPE_CTL_OFE (1 << 16) /**< OutFifoEnable */ +#define IX_NPEMH_NPE_CTL_IFE (1 << 17) /**< InFifoEnable */ +#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */ +#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */ + +/* NPE status register bit definitions */ +#define IX_NPEMH_NPE_STAT_OFNE (1 << 16) /**< OutFifoNotEmpty */ +#define IX_NPEMH_NPE_STAT_IFNF (1 << 17) /**< InFifoNotFull */ +#define IX_NPEMH_NPE_STAT_OFNF (1 << 18) /**< OutFifoNotFull */ +#define IX_NPEMH_NPE_STAT_IFNE (1 << 19) /**< InFifoNotEmpty */ +#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */ +#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */ +#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */ +#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */ + + +/** + * Variable declarations. Externs are followed by static variables. + */ +extern IxNpeMhConfigNpeInfo ixNpeMhConfigNpeInfo[IX_NPEMH_NUM_NPES]; + + +/* + * Prototypes for interface functions. + */ + +/** + * @fn void ixNpeMhConfigInitialize ( + IxNpeMhNpeInterrupts npeInterrupts) + * + * @brief This function initialises the Configuration module. + * + * @param IxNpeMhNpeInterrupts npeInterrupts (in) - whether or not to + * service the NPE "outFIFO not empty" interrupts. + * + * @return No return value. + */ + +void ixNpeMhConfigInitialize ( + IxNpeMhNpeInterrupts npeInterrupts); + +/** + * @fn void ixNpeMhConfigUninit (void) + * + * @brief This function uninitialises the Configuration module. + * + * @return No return value. + */ + +void ixNpeMhConfigUninit (void); + +/** + * @fn void ixNpeMhConfigIsrRegister ( + IxNpeMhNpeId npeId, + IxNpeMhConfigIsr isr) + * + * @brief This function registers an ISR to handle NPE "outFIFO not + * empty" interrupts. + * + * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will + * be handled. + * @param IxNpeMhConfigIsr isr (in) - the ISR function pointer that the + * interrupt will trigger. + * + * @return No return value. + */ + +void ixNpeMhConfigIsrRegister ( + IxNpeMhNpeId npeId, + IxNpeMhConfigIsr isr); + +/** + * @fn BOOL ixNpeMhConfigNpeInterruptEnable ( + IxNpeMhNpeId npeId) + * + * @brief This function enables a NPE's "outFIFO not empty" interrupt. + * + * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will + * be enabled. + * + * @return Returns the previous state of the interrupt (TRUE => enabled). + */ + +BOOL ixNpeMhConfigNpeInterruptEnable ( + IxNpeMhNpeId npeId); + +/** + * @fn BOOL ixNpeMhConfigNpeInterruptDisable ( + IxNpeMhNpeId npeId) + * + * @brief This function disables a NPE's "outFIFO not empty" interrupt + * + * @param IxNpeMhNpeId npeId (in) - the ID of the NPE whose interrupt will + * be disabled. + * + * @return Returns the previous state of the interrupt (TRUE => enabled). + */ + +BOOL ixNpeMhConfigNpeInterruptDisable ( + IxNpeMhNpeId npeId); + +/** + * @fn IxNpeMhMessageId ixNpeMhConfigMessageIdGet ( + IxNpeMhMessage message) + * + * @brief This function gets the ID of a message. + * + * @param IxNpeMhMessage message (in) - the message to get the ID of. + * + * @return the ID of the message + */ + +IxNpeMhMessageId ixNpeMhConfigMessageIdGet ( + IxNpeMhMessage message); + +/** + * @fn BOOL ixNpeMhConfigNpeIdIsValid ( + IxNpeMhNpeId npeId) + * + * @brief This function checks to see if a NPE ID is valid. + * + * @param IxNpeMhNpeId npeId (in) - the NPE ID to validate. + * + * @return True if the NPE ID is valid, otherwise False. + */ + +BOOL ixNpeMhConfigNpeIdIsValid ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhConfigLockGet ( + IxNpeMhNpeId npeId) + * + * @brief This function gets a lock for exclusive NPE interaction, and + * disables the NPE's "outFIFO not empty" interrupt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which to get the + * lock and disable its interrupt. + * + * @return No return value. + */ + +void ixNpeMhConfigLockGet ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhConfigLockRelease ( + IxNpeMhNpeId npeId) + * + * @brief This function releases a lock for exclusive NPE interaction, and + * enables the NPE's "outFIFO not empty" interrupt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which to release + * the lock and enable its interrupt. + * + * @return No return value. + */ + +void ixNpeMhConfigLockRelease ( + IxNpeMhNpeId npeId); + +/** + * @fn BOOL ixNpeMhConfigInFifoIsEmpty ( + IxNpeMhNpeId npeId) + * + * @brief This inline function checks if a NPE's inFIFO is empty. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO + * will be checked. + * + * @return True if the inFIFO is empty, otherwise False. + */ + +IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsEmpty ( + IxNpeMhNpeId npeId); + +/** + * @fn BOOL ixNpeMhConfigInFifoIsFull ( + IxNpeMhNpeId npeId) + * + * @brief This inline function checks if a NPE's inFIFO is full. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO + * will be checked. + * + * @return True if the inFIFO is full, otherwise False. + */ + +IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigInFifoIsFull ( + IxNpeMhNpeId npeId); + +/** + * @fn BOOL ixNpeMhConfigOutFifoIsEmpty ( + IxNpeMhNpeId npeId) + * + * @brief This inline function checks if a NPE's outFIFO is empty. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO + * will be checked. + * + * @return True if the outFIFO is empty, otherwise False. + */ + +IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsEmpty ( + IxNpeMhNpeId npeId); + +/** + * @fn BOOL ixNpeMhConfigOutFifoIsFull ( + IxNpeMhNpeId npeId) + * + * @brief This inline function checks if a NPE's outFIFO is full. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO + * will be checked. + * + * @return True if the outFIFO is full, otherwise False. + */ + +IXNPEMHCONFIG_INLINE BOOL ixNpeMhConfigOutFifoIsFull ( + IxNpeMhNpeId npeId); + +/** + * @fn IX_STATUS ixNpeMhConfigInFifoWrite ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message) + * + * @brief This function writes a message to a NPE's inFIFO. The caller + * must first check that the NPE's inFifo is not full. After writing the first + * word of the message, this function will keep polling NPE's inFIFO is not + * full to write the second word. If inFIFO is not available after maximum + * retries (IX_NPE_MH_MAX_NUM_OF_RETRIES), this function will return TIMEOUT + * status to indicate NPE hang / halt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the inFIFO + * will be written to. + * @param IxNpeMhMessage message (in) - The message to write. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +IX_STATUS ixNpeMhConfigInFifoWrite ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message); + +/** + * @fn IX_STATUS ixNpeMhConfigOutFifoRead ( + IxNpeMhNpeId npeId, + IxNpeMhMessage *message) + * + * @brief This function reads a message from a NPE's outFIFO. The caller + * must first check that the NPE's outFifo is not empty. After reading the first + * word of the message, this function will keep polling NPE's outFIFO is not + * empty to read the second word. If outFIFO is empty after maximum + * retries (IX_NPE_MH_MAX_NUM_OF_RETRIES), this function will return TIMEOUT + * status to indicate NPE hang / halt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE for which the outFIFO + * will be read from. + * @param IxNpeMhMessage message (out) - The message read. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +IX_STATUS ixNpeMhConfigOutFifoRead ( + IxNpeMhNpeId npeId, + IxNpeMhMessage *message); + +/** + * @fn void ixNpeMhConfigShow ( + IxNpeMhNpeId npeId) + * + * @brief This function will display the current state of the Configuration + * module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state + * information for. + * + * @return No return value. + */ + +void ixNpeMhConfigShow ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhConfigShowReset ( + IxNpeMhNpeId npeId) + * + * @brief This function will reset the current state of the Configuration + * module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state + * information for. + * + * @return No return value. + */ + +void ixNpeMhConfigShowReset ( + IxNpeMhNpeId npeId); + +/* + * Inline functions + */ + +/* + * This inline function checks if a NPE's inFIFO is empty. + */ + +IXNPEMHCONFIG_INLINE +BOOL ixNpeMhConfigInFifoIsEmpty ( + IxNpeMhNpeId npeId) +{ + UINT32 ifne; + volatile UINT32 *statusReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; + + /* get the IFNE (InFifoNotEmpty) bit of the status register */ + IX_NPEMH_REGISTER_READ_BITS (statusReg, &ifne, IX_NPEMH_NPE_STAT_IFNE); + + /* if the IFNE status bit is unset then the inFIFO is empty */ + return (ifne == 0); +} + + +/* + * This inline function checks if a NPE's inFIFO is full. + */ +IXNPEMHCONFIG_INLINE +BOOL ixNpeMhConfigInFifoIsFull ( + IxNpeMhNpeId npeId) +{ + UINT32 ifnf; + volatile UINT32 *statusReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; + + /* get the IFNF (InFifoNotFull) bit of the status register */ + IX_NPEMH_REGISTER_READ_BITS (statusReg, &ifnf, IX_NPEMH_NPE_STAT_IFNF); + + /* if the IFNF status bit is unset then the inFIFO is full */ + return (ifnf == 0); +} + + +/* + * This inline function checks if a NPE's outFIFO is empty. + */ +IXNPEMHCONFIG_INLINE +BOOL ixNpeMhConfigOutFifoIsEmpty ( + IxNpeMhNpeId npeId) +{ + UINT32 ofne; + volatile UINT32 *statusReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; + + /* get the OFNE (OutFifoNotEmpty) bit of the status register */ + IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofne, IX_NPEMH_NPE_STAT_OFNE); + + /* if the OFNE status bit is unset then the outFIFO is empty */ + return (ofne == 0); +} + +/* + * This inline function checks if a NPE's outFIFO is full. + */ +IXNPEMHCONFIG_INLINE +BOOL ixNpeMhConfigOutFifoIsFull ( + IxNpeMhNpeId npeId) +{ + UINT32 ofnf; + volatile UINT32 *statusReg = + (UINT32 *)ixNpeMhConfigNpeInfo[npeId].statusRegister; + + /* get the OFNF (OutFifoNotFull) bit of the status register */ + IX_NPEMH_REGISTER_READ_BITS (statusReg, &ofnf, IX_NPEMH_NPE_STAT_OFNF); + + /* if the OFNF status bit is unset then the outFIFO is full */ + return (ofnf == 0); +} + +#endif /* IXNPEMHCONFIG_P_H */ + +/** + * @} defgroup IxNpeMhConfig_p + */ diff --git a/drivers/net/npe/include/IxNpeMhMacros_p.h b/drivers/net/npe/include/IxNpeMhMacros_p.h new file mode 100644 index 0000000000..68f34ef357 --- /dev/null +++ b/drivers/net/npe/include/IxNpeMhMacros_p.h @@ -0,0 +1,296 @@ +/** + * @file IxNpeMhMacros_p.h + * + * @author Intel Corporation + * @date 21 Jan 2002 + * + * @brief This file contains the macros for the IxNpeMh component. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMhMacros_p IxNpeMhMacros_p + * + * @brief Macros for the IxNpeMh component. + * + * @{ + */ + +#ifndef IXNPEMHMACROS_P_H +#define IXNPEMHMACROS_P_H + +/* if we are running as a unit test */ +#ifdef IX_UNIT_TEST +#undef NDEBUG +#endif /* #ifdef IX_UNIT_TEST */ + +#include "IxOsal.h" + +/* + * #defines for function return types, etc. + */ + +#define IX_NPEMH_SHOW_TEXT_WIDTH (40) /**< text width for stats display */ +#define IX_NPEMH_SHOW_STAT_WIDTH (10) /**< stat width for stats display */ + +/** + * @def IX_NPEMH_SHOW + * + * @brief Macro for displaying a stat preceded by a textual description. + */ + +#define IX_NPEMH_SHOW(TEXT, STAT) \ + ixOsalLog (IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, \ + "%-40s: %10d\n", (int) TEXT, (int) STAT, 0, 0, 0, 0) + +/* + * Prototypes for interface functions. + */ + +/** + * @typedef IxNpeMhTraceTypes + * + * @brief Enumeration defining IxNpeMh trace levels + */ + +typedef enum +{ + IX_NPEMH_TRACE_OFF = IX_OSAL_LOG_LVL_NONE, /**< no trace */ + IX_NPEMH_WARNING = IX_OSAL_LOG_LVL_WARNING, /**< warning */ + IX_NPEMH_DEBUG = IX_OSAL_LOG_LVL_MESSAGE, /**< debug */ + IX_NPEMH_FN_ENTRY_EXIT = IX_OSAL_LOG_LVL_DEBUG3 /**< function entry/exit */ +} IxNpeMhTraceTypes; + +#ifdef IX_UNIT_TEST +#define IX_NPEMH_TRACE_LEVEL (IX_NPEMH_FN_ENTRY_EXIT) /**< trace level */ +#else +#define IX_NPEMH_TRACE_LEVEL (IX_NPEMH_TRACE_OFF) /**< trace level */ +#endif + +/** + * @def IX_NPEMH_TRACE0 + * + * @brief Trace macro taking 0 arguments. + */ + +#define IX_NPEMH_TRACE0(LEVEL, STR) \ + IX_NPEMH_TRACE6(LEVEL, STR, 0, 0, 0, 0, 0, 0) + +/** + * @def IX_NPEMH_TRACE1 + * + * @brief Trace macro taking 1 argument. + */ + +#define IX_NPEMH_TRACE1(LEVEL, STR, ARG1) \ + IX_NPEMH_TRACE6(LEVEL, STR, ARG1, 0, 0, 0, 0, 0) + +/** + * @def IX_NPEMH_TRACE2 + * + * @brief Trace macro taking 2 arguments. + */ + +#define IX_NPEMH_TRACE2(LEVEL, STR, ARG1, ARG2) \ + IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, 0, 0, 0, 0) + +/** + * @def IX_NPEMH_TRACE3 + * + * @brief Trace macro taking 3 arguments. + */ + +#define IX_NPEMH_TRACE3(LEVEL, STR, ARG1, ARG2, ARG3) \ + IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, 0, 0, 0) + +/** + * @def IX_NPEMH_TRACE4 + * + * @brief Trace macro taking 4 arguments. + */ + +#define IX_NPEMH_TRACE4(LEVEL, STR, ARG1, ARG2, ARG3, ARG4) \ + IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, 0, 0) + +/** + * @def IX_NPEMH_TRACE5 + * + * @brief Trace macro taking 5 arguments. + */ + +#define IX_NPEMH_TRACE5(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, ARG5) \ + IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, ARG5, 0) + +/** + * @def IX_NPEMH_TRACE6 + * + * @brief Trace macro taking 6 arguments. + */ + +#define IX_NPEMH_TRACE6(LEVEL, STR, ARG1, ARG2, ARG3, ARG4, ARG5, ARG6) \ +{ \ + if (LEVEL <= IX_NPEMH_TRACE_LEVEL) \ + { \ + (void) ixOsalLog (LEVEL, IX_OSAL_LOG_DEV_STDOUT, (STR), \ + (int)(ARG1), (int)(ARG2), (int)(ARG3), \ + (int)(ARG4), (int)(ARG5), (int)(ARG6)); \ + } \ +} + +/** + * @def IX_NPEMH_ERROR_REPORT + * + * @brief Error reporting facility. + */ + +#define IX_NPEMH_ERROR_REPORT(STR) \ +{ \ + (void) ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, \ + (STR), 0, 0, 0, 0, 0, 0); \ +} + +/* if we are running on XScale, i.e. real environment */ +#if CPU==XSCALE + +/** + * @def IX_NPEMH_REGISTER_READ + * + * @brief This macro reads a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_READ(registerAddress, value) \ +{ \ + *value = IX_OSAL_READ_LONG(registerAddress); \ +} + +/** + * @def IX_NPEMH_REGISTER_READ_BITS + * + * @brief This macro partially reads a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_READ_BITS(registerAddress, value, mask) \ +{ \ + *value = (IX_OSAL_READ_LONG(registerAddress) & mask); \ +} + +/** + * @def IX_NPEMH_REGISTER_WRITE + * + * @brief This macro writes a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_WRITE(registerAddress, value) \ +{ \ + IX_OSAL_WRITE_LONG(registerAddress, value); \ +} + +/** + * @def IX_NPEMH_REGISTER_WRITE_BITS + * + * @brief This macro partially writes a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_WRITE_BITS(registerAddress, value, mask) \ +{ \ + UINT32 orig = IX_OSAL_READ_LONG(registerAddress); \ + orig &= (~mask); \ + orig |= (value & mask); \ + IX_OSAL_WRITE_LONG(registerAddress, orig); \ +} + + +/* if we are running as a unit test */ +#else /* #if CPU==XSCALE */ + +#include "IxNpeMhTestRegister.h" + +/** + * @def IX_NPEMH_REGISTER_READ + * + * @brief This macro reads a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_READ(registerAddress, value) \ +{ \ + ixNpeMhTestRegisterRead (registerAddress, value); \ +} + +/** + * @def IX_NPEMH_REGISTER_READ_BITS + * + * @brief This macro partially reads a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_READ_BITS(registerAddress, value, mask) \ +{ \ + ixNpeMhTestRegisterReadBits (registerAddress, value, mask); \ +} + +/** + * @def IX_NPEMH_REGISTER_WRITE + * + * @brief This macro writes a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_WRITE(registerAddress, value) \ +{ \ + ixNpeMhTestRegisterWrite (registerAddress, value); \ +} + +/** + * @def IX_NPEMH_REGISTER_WRITE_BITS + * + * @brief This macro partially writes a memory-mapped register. + */ + +#define IX_NPEMH_REGISTER_WRITE_BITS(registerAddress, value, mask) \ +{ \ + ixNpeMhTestRegisterWriteBits (registerAddress, value, mask); \ +} + +#endif /* #if CPU==XSCALE */ + +#endif /* IXNPEMHMACROS_P_H */ + +/** + * @} defgroup IxNpeMhMacros_p + */ diff --git a/drivers/net/npe/include/IxNpeMhReceive_p.h b/drivers/net/npe/include/IxNpeMhReceive_p.h new file mode 100644 index 0000000000..6416bedcbc --- /dev/null +++ b/drivers/net/npe/include/IxNpeMhReceive_p.h @@ -0,0 +1,139 @@ +/** + * @file IxNpeMhReceive_p.h + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the private API for the Receive module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMhReceive_p IxNpeMhReceive_p + * + * @brief The private API for the Receive module. + * + * @{ + */ + +#ifndef IXNPEMHRECEIVE_P_H +#define IXNPEMHRECEIVE_P_H + +#include "IxNpeMh.h" +#include "IxOsalTypes.h" + +/* + * #defines for function return types, etc. + */ + +/* + * Prototypes for interface functions. + */ + +/** + * @fn void ixNpeMhReceiveInitialize (void) + * + * @brief This function registers an internal ISR to handle the NPEs' + * "outFIFO not empty" interrupts and receive messages from the NPEs when + * they become available. + * + * @return No return value. + */ + +void ixNpeMhReceiveInitialize (void); + +/** + * @fn IX_STATUS ixNpeMhReceiveMessagesReceive ( + IxNpeMhNpeId npeId) + * + * @brief This function reads messages from a particular NPE's outFIFO + * until the outFIFO is empty, and for each message looks first for an + * unsolicited callback, then a solicited callback, to pass the message + * back to the client. If no callback can be found the message is + * discarded and an error reported. This function will return TIMEOUT + * status if NPE hang / halt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to receive + * messages from. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +IX_STATUS ixNpeMhReceiveMessagesReceive ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhReceiveShow ( + IxNpeMhNpeId npeId) + * + * @brief This function will display the current state of the Receive + * module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state + * information for. + * + * @return No return status. + */ + +void ixNpeMhReceiveShow ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhReceiveShowReset ( + IxNpeMhNpeId npeId) + * + * @brief This function will reset the current state of the Receive + * module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state + * information for. + * + * @return No return status. + */ + +void ixNpeMhReceiveShowReset ( + IxNpeMhNpeId npeId); + +#endif /* IXNPEMHRECEIVE_P_H */ + +/** + * @} defgroup IxNpeMhReceive_p + */ diff --git a/drivers/net/npe/include/IxNpeMhSend_p.h b/drivers/net/npe/include/IxNpeMhSend_p.h new file mode 100644 index 0000000000..977cc94a7f --- /dev/null +++ b/drivers/net/npe/include/IxNpeMhSend_p.h @@ -0,0 +1,163 @@ +/** + * @file IxNpeMhSend_p.h + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the private API for the Send module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMhSend_p IxNpeMhSend_p + * + * @brief The private API for the Send module. + * + * @{ + */ + +#ifndef IXNPEMHSEND_P_H +#define IXNPEMHSEND_P_H + +#include "IxNpeMh.h" +#include "IxOsalTypes.h" + +/* + * #defines for function return types, etc. + */ + +/* + * Prototypes for interface functions. + */ + +/** + * @fn IX_STATUS ixNpeMhSendMessageSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + UINT32 maxSendRetries) + * + * @brief This function writes a message to the specified NPE's inFIFO, + * and must be used when the message being sent does not solicit a response + * from the NPE. This function will return TIMEOUT status if NPE hang / halt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to send the message + * to. + * @param IxNpeMhMessage message (in) - The message to send. + * @param UINT32 maxSendRetries (in) - Max num. of retries to perform + * if the NPE's inFIFO is full. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +IX_STATUS ixNpeMhSendMessageSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + UINT32 maxSendRetries); + +/** + * @fn IX_STATUS ixNpeMhSendMessageWithResponseSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback, + UINT32 maxSendRetries) + * + * @brief This function writes a message to the specified NPE's inFIFO, + * and must be used when the message being sent solicits a response from + * the NPE. The ID of the solicited response must be specified so that it + * can be recognised, and a callback provided to pass the response back to + * the client. This function will return TIMEOUT status if NPE hang / halt. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to send the message + * to. + * @param IxNpeMhMessage message (in) - The message to send. + * @param IxNpeMhMessageId solicitedMessageId (in) - The ID of the + * solicited response. + * @param IxNpeMhCallback solicitedCallback (in) - The callback to pass the + * solicited response back to the client. + * @param UINT32 maxSendRetries (in) - Max num. of retries to perform + * if the NPE's inFIFO is full. + * + * @return The function returns a status indicating success, failure or timeout. + */ + +IX_STATUS ixNpeMhSendMessageWithResponseSend ( + IxNpeMhNpeId npeId, + IxNpeMhMessage message, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback, + UINT32 maxSendRetries); + +/** + * @fn void ixNpeMhSendShow ( + IxNpeMhNpeId npeId) + * + * @brief This function will display the current state of the Send module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state + * information for. + * + * @return No return value. + */ + +void ixNpeMhSendShow ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhSendShowReset ( + IxNpeMhNpeId npeId) + * + * @brief This function will reset the current state of the Send module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state + * information for. + * + * @return No return value. + */ + +void ixNpeMhSendShowReset ( + IxNpeMhNpeId npeId); + +#endif /* IXNPEMHSEND_P_H */ + +/** + * @} defgroup IxNpeMhSend_p + */ diff --git a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h new file mode 100644 index 0000000000..40cd496c94 --- /dev/null +++ b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h @@ -0,0 +1,171 @@ +/** + * @file IxNpeMhSolicitedCbMgr_p.h + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the private API for the Solicited Callback + * Manager module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMhSolicitedCbMgr_p IxNpeMhSolicitedCbMgr_p + * + * @brief The private API for the Solicited Callback Manager module. + * + * @{ + */ + +#ifndef IXNPEMHSOLICITEDCBMGR_P_H +#define IXNPEMHSOLICITEDCBMGR_P_H + +#include "IxNpeMh.h" +#include "IxOsalTypes.h" + +/* + * #defines for function return types, etc. + */ + +/** Maximum number of solicited callbacks that can be stored in the list */ +#define IX_NPEMH_MAX_CALLBACKS (16) + +/* + * Prototypes for interface functions. + */ + +/** + * @fn void ixNpeMhSolicitedCbMgrInitialize (void) + * + * @brief This function initializes the Solicited Callback Manager module, + * setting up a callback data structure for each NPE. + * + * @return No return value. + */ + +void ixNpeMhSolicitedCbMgrInitialize (void); + +/** + * @fn IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback) + * + * @brief This function saves a callback in the specified NPE's callback + * list. If the callback list is full the function will fail. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE in whose callback + * list the callback will be saved. + * @param IxNpeMhMessageId solicitedMessageId (in) - The ID of the message + * that this callback is for. + * @param IxNpeMhCallback solicitedCallback (in) - The callback function + * pointer to save. + * + * @return The function returns a status indicating success or failure. + */ + +IX_STATUS ixNpeMhSolicitedCbMgrCallbackSave ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback solicitedCallback); + +/** + * @fn void ixNpeMhSolicitedCbMgrCallbackRetrieve ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback *solicitedCallback) + * + * @brief This function retrieves the first ID-matching callback from the + * specified NPE's callback list. If no matching callback can be found the + * function will fail. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE from whose callback + * list the callback will be retrieved. + * @param IxNpeMhMessageId solicitedMessageId (in) - The ID of the message + * that the callback is for. + * @param IxNpeMhCallback solicitedCallback (out) - The callback function + * pointer retrieved. + * + * @return No return value. + */ + +void ixNpeMhSolicitedCbMgrCallbackRetrieve ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId solicitedMessageId, + IxNpeMhCallback *solicitedCallback); + +/** + * @fn void ixNpeMhSolicitedCbMgrShow ( + IxNpeMhNpeId npeId) + * + * @brief This function will display the current state of the Solicited + * Callback Manager module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state + * information for. + * + * @return No return value. + */ + +void ixNpeMhSolicitedCbMgrShow ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhSolicitedCbMgrShowReset ( + IxNpeMhNpeId npeId) + * + * @brief This function will reset the current state of the Solicited + * Callback Manager module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state + * information for. + * + * @return No return value. + */ + +void ixNpeMhSolicitedCbMgrShowReset ( + IxNpeMhNpeId npeId); + +#endif /* IXNPEMHSOLICITEDCBMGR_P_H */ + +/** + * @} defgroup IxNpeMhSolicitedCbMgr_p + */ diff --git a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h new file mode 100644 index 0000000000..dea8cafa25 --- /dev/null +++ b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h @@ -0,0 +1,169 @@ +/** + * @file IxNpeMhUnsolicitedCbMgr_p.h + * + * @author Intel Corporation + * @date 18 Jan 2002 + * + * @brief This file contains the private API for the Unsolicited Callback + * Manager module. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxNpeMhUnsolicitedCbMgr_p IxNpeMhUnsolicitedCbMgr_p + * + * @brief The private API for the Unsolicited Callback Manager module. + * + * @{ + */ + +#ifndef IXNPEMHUNSOLICITEDCBMGR_P_H +#define IXNPEMHUNSOLICITEDCBMGR_P_H + +#include "IxNpeMh.h" +#include "IxOsalTypes.h" + +/* + * #defines for function return types, etc. + */ + +/* + * Prototypes for interface functions. + */ + +/** + * @fn void ixNpeMhUnsolicitedCbMgrInitialize (void) + * + * @brief This function initializes the Unsolicited Callback Manager + * module, setting up a callback data structure for each NPE. + * + * @return No return value. + */ + +void ixNpeMhUnsolicitedCbMgrInitialize (void); + +/** + * @fn void ixNpeMhUnsolicitedCbMgrCallbackSave ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId unsolicitedMessageId, + IxNpeMhCallback unsolicitedCallback) + * + * @brief This function saves a callback in the specified NPE's callback + * table. If a callback already exists for the specified ID then it will + * be overwritten. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE in whose callback + * table the callback will be saved. + * @param IxNpeMhMessageId unsolicitedMessageId (in) - The ID of the + * messages that this callback is for. + * @param IxNpeMhCallback unsolicitedCallback (in) - The callback function + * pointer to save. + * + * @return No return value. + */ + +void ixNpeMhUnsolicitedCbMgrCallbackSave ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId unsolicitedMessageId, + IxNpeMhCallback unsolicitedCallback); + +/** + * @fn void ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId unsolicitedMessageId, + IxNpeMhCallback *unsolicitedCallback) + * + * @brief This function retrieves the callback for the specified ID from + * the specified NPE's callback table. If no callback is registered for + * the specified ID and NPE then a callback value of NULL will be returned. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE from whose callback + * table the callback will be retrieved. + * @param IxNpeMhMessageId unsolicitedMessageId (in) - The ID of the + * messages that the callback is for. + * @param IxNpeMhCallback unsolicitedCallback (out) - The callback function + * pointer retrieved. + * + * @return No return value. + */ + +void ixNpeMhUnsolicitedCbMgrCallbackRetrieve ( + IxNpeMhNpeId npeId, + IxNpeMhMessageId unsolicitedMessageId, + IxNpeMhCallback *unsolicitedCallback); + +/** + * @fn void ixNpeMhUnsolicitedCbMgrShow ( + IxNpeMhNpeId npeId) + * + * @brief This function will display the current state of the Unsolicited + * Callback Manager module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to display state + * information for. + * + * @return No return value. + */ + +void ixNpeMhUnsolicitedCbMgrShow ( + IxNpeMhNpeId npeId); + +/** + * @fn void ixNpeMhUnsolicitedCbMgrShowReset ( + IxNpeMhNpeId npeId) + * + * @brief This function will reset the current state of the Unsolicited + * Callback Manager module. + * + * @param IxNpeMhNpeId npeId (in) - The ID of the NPE to reset state + * information for. + * + * @return No return value. + */ + +void ixNpeMhUnsolicitedCbMgrShowReset ( + IxNpeMhNpeId npeId); + +#endif /* IXNPEMHUNSOLICITEDCBMGR_P_H */ + +/** + * @} defgroup IxNpeMhUnsolicitedCbMgr_p + */ diff --git a/drivers/net/npe/include/IxNpeMicrocode.h b/drivers/net/npe/include/IxNpeMicrocode.h new file mode 100644 index 0000000000..893d8030a1 --- /dev/null +++ b/drivers/net/npe/include/IxNpeMicrocode.h @@ -0,0 +1,296 @@ +/** + * @date April 18, 2005 + * + * @brief IXP400 NPE Microcode Image file + * + * This file was generated by the IxNpeDlImageGen tool. + * It contains a NPE microcode image suitable for use + * with the NPE Downloader (IxNpeDl) component in the + * IXP400 Access Driver software library. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxNpeMicrocode IXP400 NPE Microcode Image Library + * + * @brief Library containing a set of NPE firmware images, for use + * with NPE Downloader s/w component + * + * @{ + */ + +/** + * @def IX_NPE_IMAGE_INCLUDE + * + * @brief Wrap the following Image identifiers with "#if IX_NPE_IMAGE_INCLUDE ... #endif" to include the image in the library + */ +#define IX_NPE_IMAGE_INCLUDE 1 + +/** + * @def IX_NPE_IMAGE_OMIT + * + * @brief Wrap the following Image identifiers with "#if IX_NPE_IMAGE_OMIT ... #endif" to OMIT the image from the library + */ +#define IX_NPE_IMAGE_OMIT 0 + + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_HSS0 + * + * @brief NPE Image Id for NPE-A with HSS-0 Only feature. It supports 32 channelized and 4 packetized. + */ +#define IX_NPEDL_NPEIMAGE_NPEA_HSS0 0x00010000 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT + * + * @brief NPE Image Id for NPE-A with HSS-0 and ATM feature. For HSS, it supports 16/32 channelized and 4/0 packetized. For ATM, it supports AAL5, AAL0 and OAM for UTOPIA SPHY, 1 logical port, 32 VCs. It also has Fast Path support. + */ +#define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT 0x00020000 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT + * + * @brief NPE Image Id for NPE-A with HSS-0 and ATM feature. For HSS, it supports 16/32 channelized and 4/0 packetized. For ATM, it supports AAL5, AAL0 and OAM for UTOPIA MPHY, 1 logical port, 32 VCs. It also has Fast Path support. + */ +#define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT 0x00030000 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT + * + * @brief NPE Image Id for NPE-A with ATM-Only feature. It supports AAL5, AAL0 and OAM for UTOPIA MPHY, 12 logical ports, 32 VCs. It also has Fast Path support. + */ +#define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT 0x00040000 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_DMA + * + * @brief NPE Image Id for NPE-A with DMA-Only feature. + */ +#define IX_NPEDL_NPEIMAGE_NPEA_DMA 0x00150100 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT + * + * @brief NPE Image Id for NPE-A with HSS-0 and HSS-1 feature. Each HSS port supports 32 channelized and 4 packetized. + */ +#define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT 0x00090000 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_ETH + * + * @brief NPE Image Id for NPE-A with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL + */ +#define IX_NPEDL_NPEIMAGE_NPEA_ETH 0x10800200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL + * + * @brief NPE Image Id for NPE-A with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL + */ +#define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL 0x10800200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS + * + * @brief NPE Image Id for NPE-A with Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL, VLAN_QOS + */ +#define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS 0x10810200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV + * + * @brief NPE Image Id for NPE-A with Ethernet Rx/Tx which includes: SPANNING_TREE, FIREWALL, VLAN_QOS, HEADER_CONVERSION + */ +#define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV 0x10820200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEB_ETH + * + * @brief NPE Image Id for NPE-B with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL + */ +#define IX_NPEDL_NPEIMAGE_NPEB_ETH 0x01000200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL + * + * @brief NPE Image Id for NPE-B with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL + */ +#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL 0x01000200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS + * + * @brief NPE Image Id for NPE-B with Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL, VLAN_QOS + */ +#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS 0x01010200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV + * + * @brief NPE Image Id for NPE-B with Ethernet Rx/Tx which includes: SPANNING_TREE, FIREWALL, VLAN_QOS, HEADER_CONVERSION + */ +#define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV 0x01020200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEB_DMA + * + * @brief NPE Image Id for NPE-B with DMA-Only feature. + */ +#define IX_NPEDL_NPEIMAGE_NPEB_DMA 0x01020100 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEC_ETH + * + * @brief NPE Image Id for NPE-C with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL + */ +#define IX_NPEDL_NPEIMAGE_NPEC_ETH 0x02000200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL + * + * @brief NPE Image Id for NPE-C with Basic Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL + */ +#define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL 0x02000200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS + * + * @brief NPE Image Id for NPE-C with Ethernet Rx/Tx which includes: MAC_FILTERING, MAC_LEARNING, SPANNING_TREE, FIREWALL, VLAN_QOS + */ +#define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS 0x02010200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV + * + * @brief NPE Image Id for NPE-C with Ethernet Rx/Tx which includes: SPANNING_TREE, FIREWALL, VLAN_QOS, HEADER_CONVERSION + */ +#define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV 0x02020200 +#endif + +#if IX_NPE_IMAGE_INCLUDE +/** + * @def IX_NPEDL_NPEIMAGE_NPEC_DMA + * + * @brief NPE Image Id for NPE-C with DMA-Only feature. + */ +#define IX_NPEDL_NPEIMAGE_NPEC_DMA 0x02080100 +#endif + +/* Number of NPE firmware images in this library */ +#define IX_NPE_MICROCODE_AVAILABLE_VERSIONS_COUNT 17 + +/* Location of Microcode Images */ +#ifdef IX_NPE_MICROCODE_FIRMWARE_INCLUDED +#ifdef IX_NPEDL_READ_MICROCODE_FROM_FILE + +extern UINT32* ixNpeMicrocode_binaryArray; + +#else + +extern unsigned IxNpeMicrocode_array[]; + +#endif +#endif + +/* + * sr: undef all but the bare minimum to reduce flash usage for U-Boot + */ +#undef IX_NPEDL_NPEIMAGE_NPEA_HSS0 +#undef IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT +#undef IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT +#undef IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT +#undef IX_NPEDL_NPEIMAGE_NPEA_DMA +#undef IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT +#undef IX_NPEDL_NPEIMAGE_NPEA_ETH +#undef IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL +#undef IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS +#undef IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV +#undef IX_NPEDL_NPEIMAGE_NPEB_ETH +#undef IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL +/* #undef IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS */ +#undef IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV +#undef IX_NPEDL_NPEIMAGE_NPEB_DMA +#undef IX_NPEDL_NPEIMAGE_NPEC_ETH +#undef IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL +/* #undef IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS */ +#undef IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV +#undef IX_NPEDL_NPEIMAGE_NPEC_DMA + +/** + * @} defgroup IxNpeMicrocode + */ diff --git a/drivers/net/npe/include/IxOsBufLib.h b/drivers/net/npe/include/IxOsBufLib.h new file mode 100644 index 0000000000..a297a97d8b --- /dev/null +++ b/drivers/net/npe/include/IxOsBufLib.h @@ -0,0 +1,55 @@ +/** + * @file IxOsBufLib.h (Replaced by OSAL) + * + * @date 9 Oct 2002 + * + * @brief This file contains the mbuf pool initialisation entry point + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * + */ + +#ifndef IXOSBUFLIB_H +#define IXOSBUFLIB_H + +#include "IxOsalBackward.h" + +#endif /* IXOSBUFLIB_H */ + diff --git a/drivers/net/npe/include/IxOsBuffMgt.h b/drivers/net/npe/include/IxOsBuffMgt.h new file mode 100644 index 0000000000..b7de712bc5 --- /dev/null +++ b/drivers/net/npe/include/IxOsBuffMgt.h @@ -0,0 +1,52 @@ +/** + * @file (Replaced by OSAL) + * + * @brief This file includes the OS dependant MBUF header files. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#ifndef IxOsBuffMgt_inc +#define IxOsBuffMgt_inc + +#include "IxOsalBackward.h" + +#endif /* ndef IxOsBuffMgt_inc */ diff --git a/drivers/net/npe/include/IxOsBuffPoolMgt.h b/drivers/net/npe/include/IxOsBuffPoolMgt.h new file mode 100644 index 0000000000..4a983c7911 --- /dev/null +++ b/drivers/net/npe/include/IxOsBuffPoolMgt.h @@ -0,0 +1,74 @@ +/** + * @file IxOsBuffPoolMgt.h (Replaced by OSAL) + * + * @date 9 Oct 2002 + * + * @brief This file contains the mbuf pool implementation API + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * This module contains the implementation of the OS Services buffer pool + * management service. This module provides routines for creating pools + * of buffers for exchange of network data, getting and returning buffers + * from and to the pool, and some other utility functions. + * <P> + * Currently, the pool has 2 underlying implementations - one for the vxWorks + * OS, and another which attempts to be OS-agnostic so that it can be used on + * other OS's such as Linux. The API is largely the same for all OS's, + * but there are some differences to be aware of. These are documented + * in the API descriptions below. + * <P> + * The most significant difference is this: when this module is used with + * the WindRiver VxWorks OS, it will create a pool of vxWorks "MBufs". + * These can be used directly with the vxWorks "netBufLib" OS Library. + * For other OS's, it will create a pool of generic buffers. These may need + * to be converted into other buffer types (sk_buff's in Linux, for example) + * before being used with any built-in OS routines available for + * manipulating network data buffers. + * + * @sa IxOsBuffMgt.h + */ + +#ifndef IXOSBUFFPOOLMGT_H +#define IXOSBUFFPOOLMGT_H + +#include "IxOsalBackward.h" + +#endif /* IXOSBUFFPOOLMGT_H */ + diff --git a/drivers/net/npe/include/IxOsCacheMMU.h b/drivers/net/npe/include/IxOsCacheMMU.h new file mode 100644 index 0000000000..2c8592fe80 --- /dev/null +++ b/drivers/net/npe/include/IxOsCacheMMU.h @@ -0,0 +1,60 @@ +/** + * @file IxOsCacheMMU.h + * + * @brief this file contains the API of the @ref IxCacheMMU component + * + * <hr> + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsCacheMMU_H + +#ifndef __doxygen_hide +#define IxOsCacheMMU_H +#endif /* __doxygen_hide */ + +#ifdef __doxygen_HIDE +#define IX_OS_CACHE_DOXYGEN +#endif /* __doxygen_HIDE */ + +#include "IxOsalBackward.h" + +#endif /* IxOsCacheMMU_H */ + diff --git a/drivers/net/npe/include/IxOsPrintf.h b/drivers/net/npe/include/IxOsPrintf.h new file mode 100644 index 0000000000..218e140934 --- /dev/null +++ b/drivers/net/npe/include/IxOsPrintf.h @@ -0,0 +1,102 @@ +/** + * @file IxOsPrintf.h + * + * @brief this file contains the API of the @ref IxOsServices component + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#include "IxTypes.h" + +#ifndef IxOsPrintf_H + +#ifndef __doxygen_hide +#define IxOsPrintf_H +#endif /* __doxygen_hide */ + +#ifdef __wince + +#ifndef IX_USE_SERCONSOLE + +static int +ixLogMsg( + char *pFormat, + ... + ) +{ +#ifndef IN_KERNEL + static WCHAR pOutputString[256]; + static char pNarrowStr[256]; + int returnCnt = 0; + va_list ap; + + pOutputString[0] = 0; + pNarrowStr[0] = 0; + + va_start(ap, pFormat); + + returnCnt = _vsnprintf(pNarrowStr, 256, pFormat, ap); + + MultiByteToWideChar( + CP_ACP, + MB_PRECOMPOSED, + pNarrowStr, + -1, + pOutputString, + 256 + ); + + OutputDebugString(pOutputString); + + return returnCnt; +#else + return 0; +#endif +} +#define printf ixLogMsg + +#endif /* IX_USE_SERCONSOLE */ + +#endif /* __wince */ + +/** + * @} IxOsPrintf + */ + +#endif /* IxOsPrintf_H */ diff --git a/drivers/net/npe/include/IxOsServices.h b/drivers/net/npe/include/IxOsServices.h new file mode 100644 index 0000000000..62e8a790b9 --- /dev/null +++ b/drivers/net/npe/include/IxOsServices.h @@ -0,0 +1,55 @@ +/** + * @file (Replaced by OSAL) + * + * @brief this file contains the API of the @ref IxOsServices component + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ +#ifndef IxOsServices_H + +#ifndef __doxygen_hide +#define IxOsServices_H +#endif /* __doxygen_hide */ + +#include "IxOsalBackward.h" + +#endif /* IxOsServices_H */ + + diff --git a/drivers/net/npe/include/IxOsServicesComponents.h b/drivers/net/npe/include/IxOsServicesComponents.h new file mode 100644 index 0000000000..d662cd3eee --- /dev/null +++ b/drivers/net/npe/include/IxOsServicesComponents.h @@ -0,0 +1,134 @@ +/** + * @file IxOsServicesComponents.h (Replaced by OSAL) + * + * @brief Header file for memory access + * + * @par + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsServicesComponents_H +#define IxOsServicesComponents_H + +#include "IxOsalBackward.h" + * codelets_parityENAcc + * timeSyncAcc + * parityENAcc + * sspAcc + * i2c + * integration_sspAcc + * integration_i2c +#define ix_timeSyncAcc 36 +#define ix_parityENAcc 37 +#define ix_codelets_parityENAcc 38 +#define ix_sspAcc 39 +#define ix_i2c 40 +#define ix_integration_sspAcc 41 +#define ix_integration_i2c 42 +#define ix_osal 43 +#define ix_integration_parityENAcc 44 +#define ix_integration_timeSyncAcc 45 + +/*************************** + * timeSyncAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_timeSyncAcc) + +#if defined (IX_OSSERV_VXWORKS_LE) + +#define CSR_LE_DATA_COHERENT_MAPPING + +#endif /* IX_OSSERV_VXWORKS_LE */ + +#endif /* timeSyncAcc */ + +/*************************** + * parityENAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_parityENAcc) + +#if defined (IX_OSSERV_VXWORKS_LE) + +#define CSR_LE_DATA_COHERENT_MAPPING + +#endif /* IX_OSSERV_VXWORKS_LE */ + +#endif /* parityENAcc */ + +/*************************** + * codelets_parityENAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_parityENAcc) + +#if defined (IX_OSSERV_VXWORKS_LE) + +#define CSR_LE_DATA_COHERENT_MAPPING + +#endif /* IX_OSSERV_VXWORKS_LE */ + +#endif /* codelets_parityENAcc */ + +#endif /* IxOsServicesComponents_H */ + +/*************************** + * integration_timeSyncAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_integration_timeSyncAcc) + +#if defined (IX_OSSERV_VXWORKS_LE) + +#define CSR_LE_DATA_COHERENT_MAPPING + +#endif /* IX_OSSERV_VXWORKS_LE */ + +#endif /* integration_timeSyncAcc */ + +/*************************** + * integration_parityENAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_integration_parityENAcc) + +#if defined (IX_OSSERV_VXWORKS_LE) + +#define CSR_LE_DATA_COHERENT_MAPPING + +#endif /* IX_OSSERV_VXWORKS_LE */ + +#endif /* integration_parityENAcc */ diff --git a/drivers/net/npe/include/IxOsServicesEndianess.h b/drivers/net/npe/include/IxOsServicesEndianess.h new file mode 100644 index 0000000000..0d6cd8ccef --- /dev/null +++ b/drivers/net/npe/include/IxOsServicesEndianess.h @@ -0,0 +1,52 @@ +/** + * @file IxOsServicesEndianess.h (Replaced by OSAL) + * + * @brief Header file for determining system endianess and OS + * + * @par + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsServicesEndianess_H +#define IxOsServicesEndianess_H + +#include "IxOsalBackward.h" + +#endif /* IxOsServicesEndianess_H */ diff --git a/drivers/net/npe/include/IxOsServicesMemAccess.h b/drivers/net/npe/include/IxOsServicesMemAccess.h new file mode 100644 index 0000000000..58e9941065 --- /dev/null +++ b/drivers/net/npe/include/IxOsServicesMemAccess.h @@ -0,0 +1,52 @@ +/** + * @file IxOsServicesMemAccess.h (Replaced by OSAL) + * + * @brief Header file for memory access + * + * @par + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsServicesMemAccess_H +#define IxOsServicesMemAccess_H + +#include "IxOsalBackward.h" + +#endif /* IxOsServicesMemAccess_H */ diff --git a/drivers/net/npe/include/IxOsServicesMemMap.h b/drivers/net/npe/include/IxOsServicesMemMap.h new file mode 100644 index 0000000000..4ce37c3f67 --- /dev/null +++ b/drivers/net/npe/include/IxOsServicesMemMap.h @@ -0,0 +1,54 @@ +/** + * @file IxOsServicesMemMap.h (Replaced by OSAL) + * + * @brief Header file for memory access maps + * + * @par + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsServicesMemMap_H +#define IxOsServicesMemMap_H + +#include "IxOsalBackward.h" +#define IX_OSSERV_ETH_NPEA_MAP_SIZE (0x1000) /**< Eth for NPEA map size */ +#define IX_OSSERV_ETH_NPEA_PHYS_BASE IXP425_Eth_NPEA_BASE_PHYS + +#endif /* IxOsServicesMemMap_H */ diff --git a/drivers/net/npe/include/IxOsal.h b/drivers/net/npe/include/IxOsal.h new file mode 100644 index 0000000000..4ca2e45f60 --- /dev/null +++ b/drivers/net/npe/include/IxOsal.h @@ -0,0 +1,1517 @@ +/** + * @file IxOsal.h + * + * @brief Top include file for OSAL + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsal_H +#define IxOsal_H + +/* Basic types */ +#include "IxOsalTypes.h" + +/* Include assert */ +#include "IxOsalAssert.h" + +/* + * Config header gives users option to choose IO MEM + * and buffer management modules + */ + +#include "IxOsalConfig.h" + +/* + * Symbol file needed by some OS. + */ +#include "IxOsalUtilitySymbols.h" + +/* OS-specific header */ +#include "IxOsalOs.h" + + +/** + * @defgroup IxOsal Operating System Abstraction Layer (IxOsal) API + * + * @brief This service provides a thin layer of OS dependency services. + * + * This file contains the API to the functions which are some what OS dependant and would + * require porting to a particular OS. + * A primary focus of the component development is to make them as OS independent as possible. + * All other components should abstract their OS dependency to this module. + * Services overview + * -# Data types, constants, defines + * -# Interrupts + * - bind interrupts to handlers + * - unbind interrupts from handlers + * - disables all interrupts + * - enables all interrupts + * - selectively disables interrupts + * - enables an interrupt level + * - disables an interrupt level + * -# Memory + * - allocates memory + * - frees memory + * - copies memory zones + * - fills a memory zone + * - allocates cache-safe memory + * - frees cache-safe memory + * - physical to virtual address translation + * - virtual to physical address translation + * - cache to memory flush + * - cache line invalidate + * -# Threads + * - creates a new thread + * - starts a newly created thread + * - kills an existing thread + * - exits a running thread + * - sets the priority of an existing thread + * - suspends thread execution + * - resumes thread execution + * -# IPC + * - creates a message queue + * - deletes a message queue + * - sends a message to a message queue + * - receives a message from a message queue + * -# Thread Synchronisation + * - initializes a mutex + * - locks a mutex + * - unlocks a mutex + * - non-blocking attempt to lock a mutex + * - destroys a mutex object + * - initializes a fast mutex + * - non-blocking attempt to lock a fast mutex + * - unlocks a fast mutex + * - destroys a fast mutex object + * - initializes a semaphore + * - posts to (increments) a semaphore + * - waits on (decrements) a semaphore + * - non-blocking wait on semaphore + * - gets semaphore value + * - destroys a semaphore object + * - yields execution of current thread + * -# Time functions + * - yielding sleep for a number of milliseconds + * - busy sleep for a number of microseconds + * - value of the timestamp counter + * - resolution of the timestamp counter + * - system clock rate, in ticks + * - current system time + * - converts ixOsalTimeVal into ticks + * - converts ticks into ixOsalTimeVal + * - converts ixOsalTimeVal to milliseconds + * - converts milliseconds to IxOsalTimeval + * - "equal" comparison for IxOsalTimeval + * - "less than" comparison for IxOsalTimeval + * - "greater than" comparison for IxOsalTimeval + * - "add" operator for IxOsalTimeval + * - "subtract" operator for IxOsalTimeval + * -# Logging + * - sets the current logging verbosity level + * - interrupt-safe logging function + * -# Timer services + * - schedules a repeating timer + * - schedules a single-shot timer + * - cancels a running timer + * - displays all the running timers + * -# Optional Modules + * - Buffer management module + * - I/O memory and endianess support module + * + * @{ + */ + + +/* + * Prototypes + */ + +/* ========================== Interrupts ================================ + * + */ + +/** + * @ingroup IxOsal + * + * @brief Binds an interrupt handler to an interrupt level + * + * @param irqLevel (in) - interrupt level + * @param irqHandler (in) - interrupt handler + * @param parameter (in) - custom parameter to be passed to the + * interrupt handler + * + * Binds an interrupt handler to an interrupt level. The operation will + * fail if the wrong level is selected, if the handler is NULL, or if the + * interrupt is already bound. This functions binds the specified C + * routine to an interrupt level. When called, the "parameter" value will + * be passed to the routine. + * + * Reentrant: no + * IRQ safe: no + * + * @return IX_SUCCESS if the operation succeeded or IX_FAIL otherwise + */ +PUBLIC IX_STATUS ixOsalIrqBind (UINT32 irqLevel, + IxOsalVoidFnVoidPtr irqHandler, + void *parameter); + +/** + * @ingroup IxOsal + * + * @brief Unbinds an interrupt handler from an interrupt level + * + * @param irqLevel (in) - interrupt level + * + * Unbinds the selected interrupt level from any previously registered + * handler + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return IX_SUCCESS if the operation succeeded or IX_FAIL otherwise + */ +PUBLIC IX_STATUS ixOsalIrqUnbind (UINT32 irqLevel); + + +/** + * @ingroup IxOsal + * + * @brief Disables all interrupts + * + * @param - none + * + * Disables all the interrupts and prevents tasks scheduling + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return interrupt enable status prior to locking + */ +PUBLIC UINT32 ixOsalIrqLock (void); + +/** + * @ingroup IxOsal + * + * @brief Enables all interrupts + * + * @param irqEnable (in) - interrupt enable status, prior to interrupt + * locking + * + * Enables the interrupts and task scheduling, cancelling the effect + * of ixOsalIrqLock() + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return IX_SUCCESS if the operation succeeded or IX_FAIL otherwise + */ +PUBLIC void ixOsalIrqUnlock (UINT32 irqEnable); + +/** + * @ingroup IxOsal + * + * @brief Selectively disables interrupts + * + * @param irqLevel - new interrupt level + * + * Disables the interrupts below the specified interrupt level + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @note Depending on the implementation this function can disable all + * the interrupts + * + * @return previous interrupt level + */ +PUBLIC UINT32 ixOsalIrqLevelSet (UINT32 irqLevel); + +/** + * @ingroup IxOsal + * + * @brief Enables an interrupt level + * + * @param irqLevel - interrupt level to enable + * + * Enables the specified interrupt level + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return - none + */ +PUBLIC void ixOsalIrqEnable (UINT32 irqLevel); + +/** + * @ingroup IxOsal + * + * @brief Disables an interrupt level + * + * @param irqLevel - interrupt level to disable + * + * Disables the specified interrupt level + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return - none + */ +PUBLIC void ixOsalIrqDisable (UINT32 irqLevel); + + +/* ============================= Memory ================================= + * + */ + +/** + * @ingroup IxOsal + * + * @brief Allocates memory + * + * @param size - memory size to allocate, in bytes + * + * Allocates a memory zone of a given size + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return Pointer to the allocated zone or NULL if the allocation failed + */ +PUBLIC void *ixOsalMemAlloc (UINT32 size); + +/** + * @ingroup IxOsal + * + * @brief Frees memory + * + * @param ptr - pointer to the memory zone + * + * Frees a previously allocated memory zone + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - none + */ +PUBLIC void ixOsalMemFree (void *ptr); + +/** + * @ingroup IxOsal + * + * @brief Copies memory zones + * + * @param dest - destination memory zone + * @param src - source memory zone + * @param count - number of bytes to copy + * + * Copies count bytes from the source memory zone pointed by src into the + * memory zone pointed by dest. + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return Pointer to the destination memory zone + */ +PUBLIC void *ixOsalMemCopy (void *dest, void *src, UINT32 count); + +/** + * @ingroup IxOsal + * + * @brief Fills a memory zone + * + * @param ptr - pointer to the memory zone + * @param filler - byte to fill the memory zone with + * @param count - number of bytes to fill + * + * Fills a memory zone with a given constant byte + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return Pointer to the memory zone + */ +PUBLIC void *ixOsalMemSet (void *ptr, UINT8 filler, UINT32 count); + +/** + * @ingroup IxOsal + * + * @brief Allocates cache-safe memory + * + * @param size - size, in bytes, of the allocated zone + * + * Allocates a cache-safe memory zone of at least "size" bytes and returns + * the pointer to the memory zone. This memory zone, depending on the + * platform, is either uncached or aligned on a cache line boundary to make + * the CACHE_FLUSH and CACHE_INVALIDATE macros safe to use. The memory + * allocated with this function MUST be freed with ixOsalCacheDmaFree(), + * otherwise memory corruption can occur. + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return Pointer to the memory zone or NULL if allocation failed + * + * @note It is important to note that cache coherence is maintained in + * software by using the IX_OSAL_CACHE_FLUSH and IX_OSAL_CACHE_INVALIDATE + * macros to maintain consistency between cache and external memory. + */ +PUBLIC void *ixOsalCacheDmaMalloc (UINT32 size); + +/* Macros for ixOsalCacheDmaMalloc*/ +#define IX_OSAL_CACHE_DMA_MALLOC(size) ixOsalCacheDmaMalloc(size) + +/** + * @ingroup IxOsal + * + * @brief Frees cache-safe memory + * + * @param ptr - pointer to the memory zone + * + * Frees a memory zone previously allocated with ixOsalCacheDmaMalloc() + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - none + */ +PUBLIC void ixOsalCacheDmaFree (void *ptr); + +#define IX_OSAL_CACHE_DMA_FREE(ptr) ixOsalCacheDmaFree(ptr) + +/** + * @ingroup IxOsal + * + * @brief physical to virtual address translation + * + * @param physAddr - physical address + * + * Converts a physical address into its equivalent MMU-mapped virtual address + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return Corresponding virtual address, as UINT32 + */ +#define IX_OSAL_MMU_PHYS_TO_VIRT(physAddr) \ + IX_OSAL_OS_MMU_PHYS_TO_VIRT(physAddr) + + +/** + * @ingroup IxOsal + * + * @brief virtual to physical address translation + * + * @param virtAddr - virtual address + * + * Converts a virtual address into its equivalent MMU-mapped physical address + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return Corresponding physical address, as UINT32 + */ +#define IX_OSAL_MMU_VIRT_TO_PHYS(virtAddr) \ + IX_OSAL_OS_MMU_VIRT_TO_PHYS(virtAddr) + + + +/** + * @ingroup IxOsal + * + * @brief cache to memory flush + * + * @param addr - memory address to flush from cache + * @param size - number of bytes to flush (rounded up to a cache line) + * + * Flushes the cached value of the memory zone pointed by "addr" into memory, + * rounding up to a cache line. Use before the zone is to be read by a + * processing unit which is not cache coherent with the main CPU. + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return - none + */ +#define IX_OSAL_CACHE_FLUSH(addr, size) IX_OSAL_OS_CACHE_FLUSH(addr, size) + + + +/** + * @ingroup IxOsal + * + * @brief cache line invalidate + * + * @param addr - memory address to invalidate in cache + * @param size - number of bytes to invalidate (rounded up to a cache line) + * + * Invalidates the cached value of the memory zone pointed by "addr", + * rounding up to a cache line. Use before reading the zone from the main + * CPU, if the zone has been updated by a processing unit which is not cache + * coherent with the main CPU. + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return - none + */ +#define IX_OSAL_CACHE_INVALIDATE(addr, size) IX_OSAL_OS_CACHE_INVALIDATE(addr, size) + + +/* ============================= Threads ================================= + * + */ + +/** + * @ingroup IxOsal + * + * @brief Creates a new thread + * + * @param thread - handle of the thread to be created + * @param threadAttr - pointer to a thread attribute object + * @param startRoutine - thread entry point + * @param arg - argument given to the thread + * + * Creates a thread given a thread handle and a thread attribute object. The + * same thread attribute object can be used to create separate threads. "NULL" + * can be specified as the attribute, in which case the default values will + * be used. The thread needs to be explicitly started using ixOsalThreadStart(). + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalThreadCreate (IxOsalThread * thread, + IxOsalThreadAttr * threadAttr, + IxOsalVoidFnVoidPtr startRoutine, + void *arg); + +/** + * @ingroup IxOsal + * + * @brief Starts a newly created thread + * + * @param thread - handle of the thread to be started + * + * Starts a thread given its thread handle. This function is to be called + * only once, following the thread initialization. + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalThreadStart (IxOsalThread * thread); + +/** + * @ingroup IxOsal + * + * @brief Kills an existing thread + * + * @param thread - handle of the thread to be killed + * + * Kills a thread given its thread handle. + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @note It is not possible to kill threads in Linux kernel mode. This + * function will only send a SIGTERM signal, and it is the responsibility + * of the thread to check for the presence of this signal with + * signal_pending(). + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalThreadKill (IxOsalThread * thread); + +/** + * @ingroup IxOsal + * + * @brief Exits a running thread + * + * Terminates the calling thread + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - This function never returns + */ +PUBLIC void ixOsalThreadExit (void); + +/** + * @ingroup IxOsal + * + * @brief Sets the priority of an existing thread + * + * @param thread - handle of the thread + * @param priority - new priority, between 0 and 255 (0 being the highest) + * + * Sets the thread priority + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalThreadPrioritySet (IxOsalThread * thread, + UINT32 priority); + +/** + * @ingroup IxOsal + * + * @brief Suspends thread execution + * + * @param thread - handle of the thread + * + * Suspends the thread execution + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalThreadSuspend (IxOsalThread * thread); + +/** + * @ingroup IxOsal + * + * @brief Resumes thread execution + * + * @param thread - handle of the thread + * + * Resumes the thread execution + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalThreadResume (IxOsalThread * thread); + + +/* ======================= Message Queues (IPC) ========================== + * + */ + +/** + * @ingroup IxOsal + * + * @brief Creates a message queue + * + * @param queue - queue handle + * @param msgCount - maximum number of messages to hold in the queue + * @param msgLen - maximum length of each message, in bytes + * + * Creates a message queue of msgCount messages, each containing msgLen bytes + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMessageQueueCreate (IxOsalMessageQueue * queue, + UINT32 msgCount, UINT32 msgLen); + +/** + * @ingroup IxOsal + * + * @brief Deletes a message queue + * + * @param queue - queue handle + * + * Deletes a message queue + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMessageQueueDelete (IxOsalMessageQueue * queue); + +/** + * @ingroup IxOsal + * + * @brief Sends a message to a message queue + * + * @param queue - queue handle + * @param message - message to send + * + * Sends a message to the message queue. The message will be copied (at the + * configured size of the message) into the queue. + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMessageQueueSend (IxOsalMessageQueue * queue, + UINT8 * message); + +/** + * @ingroup IxOsal + * + * @brief Receives a message from a message queue + * + * @param queue - queue handle + * @param message - pointer to where the message should be copied to + * + * Retrieves the first message from the message queue + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMessageQueueReceive (IxOsalMessageQueue * queue, + UINT8 * message); + + +/* ======================= Thread Synchronisation ======================== + * + */ + +/** + * @ingroup IxOsal + * + * @brief initializes a mutex + * + * @param mutex - mutex handle + * + * Initializes a mutex object + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMutexInit (IxOsalMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief locks a mutex + * + * @param mutex - mutex handle + * @param timeout - timeout in ms; IX_OSAL_WAIT_FOREVER (-1) to wait forever + * or IX_OSAL_WAIT_NONE to return immediately + * + * Locks a mutex object + * + * @li Reentrant: yes + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMutexLock (IxOsalMutex * mutex, INT32 timeout); + +/** + * @ingroup IxOsal + * + * @brief Unlocks a mutex + * + * @param mutex - mutex handle + * + * Unlocks a mutex object + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMutexUnlock (IxOsalMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Non-blocking attempt to lock a mutex + * + * @param mutex - mutex handle + * + * Attempts to lock a mutex object, returning immediately with IX_SUCCESS if + * the lock was successful or IX_FAIL if the lock failed + * + * @li Reentrant: yes + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMutexTryLock (IxOsalMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Destroys a mutex object + * + * @param mutex - mutex handle + * @param + * + * Destroys a mutex object; the caller should ensure that no thread is + * blocked on this mutex + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalMutexDestroy (IxOsalMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Initializes a fast mutex + * + * @param mutex - fast mutex handle + * + * Initializes a fast mutex object + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalFastMutexInit (IxOsalFastMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Non-blocking attempt to lock a fast mutex + * + * @param mutex - fast mutex handle + * + * Attempts to lock a fast mutex object, returning immediately with + * IX_SUCCESS if the lock was successful or IX_FAIL if the lock failed + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalFastMutexTryLock (IxOsalFastMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Unlocks a fast mutex + * + * @param mutex - fast mutex handle + * + * Unlocks a fast mutex object + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalFastMutexUnlock (IxOsalFastMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Destroys a fast mutex object + * + * @param mutex - fast mutex handle + * + * Destroys a fast mutex object + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalFastMutexDestroy (IxOsalFastMutex * mutex); + +/** + * @ingroup IxOsal + * + * @brief Initializes a semaphore + * + * @param semaphore - semaphore handle + * @param value - initial semaphore value + * + * Initializes a semaphore object + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalSemaphoreInit (IxOsalSemaphore * semaphore, + UINT32 value); + +/** + * @ingroup IxOsal + * + * @brief Posts to (increments) a semaphore + * + * @param semaphore - semaphore handle + * + * Increments a semaphore object + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalSemaphorePost (IxOsalSemaphore * semaphore); + +/** + * @ingroup IxOsal + * + * @brief Waits on (decrements) a semaphore + * + * @param semaphore - semaphore handle + * @param timeout - timeout, in ms; IX_OSAL_WAIT_FOREVER (-1) if the thread + * is to block indefinitely or IX_OSAL_WAIT_NONE (0) if the thread is to + * return immediately even if the call fails + * + * Decrements a semaphore, blocking if the semaphore is + * unavailable (value is 0). + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalSemaphoreWait (IxOsalSemaphore * semaphore, + INT32 timeout); + +/** + * @ingroup IxOsal + * + * @brief Non-blocking wait on semaphore + * + * @param semaphore - semaphore handle + * + * Decrements a semaphore, not blocking the calling thread if the semaphore + * is unavailable + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalSemaphoreTryWait (IxOsalSemaphore * semaphore); + +/** + * @ingroup IxOsal + * + * @brief Gets semaphore value + * + * @param semaphore - semaphore handle + * @param value - location to store the semaphore value + * + * Retrieves the current value of a semaphore object + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalSemaphoreGetValue (IxOsalSemaphore * semaphore, + UINT32 * value); + +/** + * @ingroup IxOsal + * + * @brief Destroys a semaphore object + * + * @param semaphore - semaphore handle + * + * Destroys a semaphore object; the caller should ensure that no thread is + * blocked on this semaphore + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalSemaphoreDestroy (IxOsalSemaphore * semaphore); + +/** + * @ingroup IxOsal + * + * @brief Yields execution of current thread + * + * Yields the execution of the current thread + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - none + */ +PUBLIC void ixOsalYield (void); + + +/* ========================== Time functions =========================== + * + */ + +/** + * @ingroup IxOsal + * + * @brief Yielding sleep for a number of milliseconds + * + * @param milliseconds - number of milliseconds to sleep + * + * The calling thread will sleep for the specified number of milliseconds. + * This sleep is yielding, hence other tasks will be scheduled by the + * operating system during the sleep period. Calling this function with an + * argument of 0 will place the thread at the end of the current scheduling + * loop. + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - none + */ +PUBLIC void ixOsalSleep (UINT32 milliseconds); + +/** + * @ingroup IxOsal + * + * @brief Busy sleep for a number of microseconds + * + * @param microseconds - number of microseconds to sleep + * + * Sleeps for the specified number of microseconds, without explicitly + * yielding thread execution to the OS scheduler + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - none + */ +PUBLIC void ixOsalBusySleep (UINT32 microseconds); + +/** + * @ingroup IxOsal + * + * @brief XXX + * + * Retrieves the current timestamp + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - The current timestamp + * + * @note The implementation of this function is platform-specific. Not + * all the platforms provide a high-resolution timestamp counter. + */ +PUBLIC UINT32 ixOsalTimestampGet (void); + +/** + * @ingroup IxOsal + * + * @brief Resolution of the timestamp counter + * + * Retrieves the resolution (frequency) of the timestamp counter. + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - The resolution of the timestamp counter + * + * @note The implementation of this function is platform-specific. Not all + * the platforms provide a high-resolution timestamp counter. + */ +PUBLIC UINT32 ixOsalTimestampResolutionGet (void); + +/** + * @ingroup IxOsal + * + * @brief System clock rate, in ticks + * + * Retrieves the resolution (number of ticks per second) of the system clock + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - The system clock rate + * + * @note The implementation of this function is platform and OS-specific. + * The system clock rate is not always available - e.g. Linux does not + * provide this information in user mode + */ +PUBLIC UINT32 ixOsalSysClockRateGet (void); + +/** + * @ingroup IxOsal + * + * @brief Current system time + * + * @param tv - pointer to an IxOsalTimeval structure to store the current + * time in + * + * Retrieves the current system time (real-time) + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - none + * + * @note The implementation of this function is platform-specific. Not all + * platforms have a real-time clock. + */ +PUBLIC void ixOsalTimeGet (IxOsalTimeval * tv); + + + +/* Internal function to convert timer val to ticks. + * NOTE - This should not be called by the user. + * Use the macro IX_OSAL_TIMEVAL_TO_TICKS + * OS-independent, implemented in framework. + */ +PUBLIC UINT32 ixOsalTimevalToTicks (IxOsalTimeval tv); + + +/** + * @ingroup IxOsal + * + * @brief Converts ixOsalTimeVal into ticks + * + * @param tv - an IxOsalTimeval structure + * + * Converts an IxOsalTimeval structure into OS ticks + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - Corresponding number of ticks + * + * Note: This function is OS-independent. Implemented by core. + */ +#define IX_OSAL_TIMEVAL_TO_TICKS(tv) ixOsalTimevalToTicks(tv) + + + +/* Internal function to convert ticks to timer val + * NOTE - This should not be called by the user. + * Use the macro IX_OSAL_TICKS_TO_TIMEVAL + */ + +PUBLIC void ixOsalTicksToTimeval (UINT32 ticks, IxOsalTimeval * pTv); + + +/** + * @ingroup IxOsal + * + * @brief Converts ticks into ixOsalTimeVal + * + * @param ticks - number of ticks + * @param pTv - pointer to the destination structure + * + * Converts the specified number of ticks into an IxOsalTimeval structure + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - Corresponding IxOsalTimeval structure + * Note: This function is OS-independent. Implemented by core. + */ +#define IX_OSAL_TICKS_TO_TIMEVAL(ticks, pTv) \ + ixOsalTicksToTimeval(ticks, pTv) + + + + +/** + * @ingroup IxOsal + * + * @brief Converts ixOsalTimeVal to milliseconds + * + * @param tv - IxOsalTimeval structure to convert + * + * Converts an IxOsalTimeval structure into milliseconds + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - Corresponding number of milliseconds + * Note: This function is OS-independent. Implemented by core. + */ +#define IX_OSAL_TIMEVAL_TO_MS(tv) ((tv.secs * 1000) + (tv.nsecs / 1000000)) + + +/** + * @ingroup IxOsal + * + * @brief Converts milliseconds to IxOsalTimeval + * + * @param milliseconds - number of milliseconds to convert + * @param pTv - pointer to the destination structure + * + * Converts a millisecond value into an IxOsalTimeval structure + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - Corresponding IxOsalTimeval structure + * Note: This function is OS-independent. Implemented by core. + */ +#define IX_OSAL_MS_TO_TIMEVAL(milliseconds, pTv) \ + ((IxOsalTimeval *) pTv)->secs = milliseconds / 1000; \ + ((IxOsalTimeval *) pTv)->nsecs = (milliseconds % 1000) * 1000000 + + +/** + * @ingroup IxOsal + * + * @brief "equal" comparison for IxOsalTimeval + * + * @param tvA, tvB - IxOsalTimeval structures to compare + * + * Compares two IxOsalTimeval structures for equality + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - TRUE if the structures are equal + * - FALSE otherwise + * Note: This function is OS-independant + */ +#define IX_OSAL_TIME_EQ(tvA, tvB) \ + ((tvA).secs == (tvB).secs && (tvA).nsecs == (tvB).nsecs) + + +/** + * @ingroup IxOsal + * + * @brief "less than" comparison for IxOsalTimeval + * + * @param tvA, tvB - IxOsalTimeval structures to compare + * + * Compares two IxOsalTimeval structures to determine if the first one is + * less than the second one + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - TRUE if tvA < tvB + * - FALSE otherwise + * Note: This function is OS-independent. Implemented by core. + */ +#define IX_OSAL_TIME_LT(tvA,tvB) \ + ((tvA).secs < (tvB).secs || \ + ((tvA).secs == (tvB).secs && (tvA).nsecs < (tvB).nsecs)) + + +/** + * @ingroup IxOsal + * + * @brief "greater than" comparison for IxOsalTimeval + * + * @param tvA, tvB - IxOsalTimeval structures to compare + * + * Compares two IxOsalTimeval structures to determine if the first one is + * greater than the second one + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - TRUE if tvA > tvB + * - FALSE otherwise + * Note: This function is OS-independent. + */ +#define IX_OSAL_TIME_GT(tvA, tvB) \ + ((tvA).secs > (tvB).secs || \ + ((tvA).secs == (tvB).secs && (tvA).nsecs > (tvB).nsecs)) + + +/** + * @ingroup IxOsal + * + * @brief "add" operator for IxOsalTimeval + * + * @param tvA, tvB - IxOsalTimeval structures to add + * + * Adds the second IxOsalTimevalStruct to the first one (equivalent to + * tvA += tvB) + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - none + * Note: This function is OS-independent. + */ +#define IX_OSAL_TIME_ADD(tvA, tvB) \ + (tvA).secs += (tvB).secs; \ + (tvA).nsecs += (tvB).nsecs; \ + if ((tvA).nsecs >= IX_OSAL_BILLION) \ + { \ + (tvA).secs++; \ + (tvA).nsecs -= IX_OSAL_BILLION; } + + +/** + * @ingroup IxOsal + * + * @brief "subtract" operator for IxOsalTimeval + * + * @param tvA, tvB - IxOsalTimeval structures to subtract + * + * Subtracts the second IxOsalTimevalStruct from the first one (equivalent + * to tvA -= tvB) + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - none + * Note: This function is OS-independent. Implemented by core. + */ +#define IX_OSAL_TIME_SUB(tvA, tvB) \ + if ((tvA).nsecs >= (tvB).nsecs) \ + { \ + (tvA).secs -= (tvB).secs; \ + (tvA).nsecs -= (tvB).nsecs; \ + } \ + else \ + { \ + (tvA).secs -= ((tvB).secs + 1); \ + (tvA).nsecs += IX_OSAL_BILLION - (tvB).nsecs; \ + } + + +/* ============================= Logging ============================== + * + */ + +/** + * @ingroup IxOsal + * + * @brief Interrupt-safe logging function + * + * @param level - identifier prefix for the message + * @param device - output device + * @param format - message format, in a printf format + * @param ... - up to 6 arguments to be printed + * + * IRQ-safe logging function, similar to printf. Accepts up to 6 arguments + * to print (excluding the level, device and the format). This function will + * actually display the message only if the level is lower than the current + * verbosity level or if the IX_OSAL_LOG_USER level is used. An output device + * must be specified (see IxOsalTypes.h). + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - Beside the exceptions documented in the note below, the returned + * value is the number of printed characters, or -1 if the parameters are + * incorrect (NULL format, unknown output device) + * + * @note The exceptions to the return value are: + * VxWorks: The return value is 32 if the specified level is 1 and 64 + * if the specified level is greater than 1 and less or equal than 9. + * WinCE: If compiled for EBOOT then the return value is always 0. + * + * @note The given print format should take into account the specified + * output device. IX_OSAL_STDOUT supports all the usual print formats, + * however a custom hex display specified by IX_OSAL_HEX would support + * only a fixed number of hexadecimal digits. + */ +PUBLIC INT32 ixOsalLog (IxOsalLogLevel level, + IxOsalLogDevice device, + char *format, + int arg1, + int arg2, int arg3, int arg4, int arg5, int arg6); + +/** + * @ingroup IxOsal + * + * @brief sets the current logging verbosity level + * + * @param level - new log verbosity level + * + * Sets the log verbosity level. The default value is IX_OSAL_LOG_ERROR. + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * @return - Old log verbosity level + */ +PUBLIC UINT32 ixOsalLogLevelSet (UINT32 level); + + +/* ============================= Logging ============================== + * + */ + +/** + * @ingroup IxOsal + * + * @brief Schedules a repeating timer + * + * @param timer - handle of the timer object + * @param period - timer trigger period, in milliseconds + * @param priority - timer priority (0 being the highest) + * @param callback - user callback to invoke when the timer triggers + * @param param - custom parameter passed to the callback + * + * Schedules a timer to be called every period milliseconds. The timer + * will invoke the specified callback function possibly in interrupt + * context, passing the given parameter. If several timers trigger at the + * same time contention issues are dealt according to the specified timer + * priorities. + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalRepeatingTimerSchedule (IxOsalTimer * timer, + UINT32 period, + UINT32 priority, + IxOsalVoidFnVoidPtr callback, + void *param); + +/** + * @ingroup IxOsal + * + * @brief Schedules a single-shot timer + * + * @param timer - handle of the timer object + * @param period - timer trigger period, in milliseconds + * @param priority - timer priority (0 being the highest) + * @param callback - user callback to invoke when the timer triggers + * @param param - custom parameter passed to the callback + * + * Schedules a timer to be called after period milliseconds. The timer + * will cease to function past its first trigger. The timer will invoke + * the specified callback function, possibly in interrupt context, passing + * the given parameter. If several timers trigger at the same time contention + * issues are dealt according to the specified timer priorities. + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS +ixOsalSingleShotTimerSchedule (IxOsalTimer * timer, + UINT32 period, + UINT32 priority, + IxOsalVoidFnVoidPtr callback, void *param); + +/** + * @ingroup IxOsal + * + * @brief Cancels a running timer + * + * @param timer - handle of the timer object + * + * Cancels a single-shot or repeating timer. + * + * @li Reentrant: no + * @li IRQ safe: yes + * + * @return - IX_SUCCESS/IX_FAIL + */ +PUBLIC IX_STATUS ixOsalTimerCancel (IxOsalTimer * timer); + +/** + * @ingroup IxOsal + * + * @brief displays all the running timers + * + * Displays a list with all the running timers and their parameters (handle, + * period, type, priority, callback and user parameter) + * + * @li Reentrant: no + * @li IRQ safe: no + * + * @return - none + */ +PUBLIC void ixOsalTimersShow (void); + + +/* ============================= Version ============================== + * + */ + +/** + * @ingroup IxOsal + * + * @brief provides the name of the Operating System running + * + * @param osName - Pointer to a NULL-terminated string of characters + * that holds the name of the OS running. + * This is both an input and an ouput parameter + * @param maxSize - Input parameter that defines the maximum number of + * bytes that can be stored in osName + * + * Returns a string of characters that describe the Operating System name + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * return - IX_SUCCESS for successful retrieval + * - IX_FAIL if (osType == NULL | maxSize =< 0) + */ +PUBLIC IX_STATUS ixOsalOsNameGet (INT8* osName, INT32 maxSize); + +/** + * @ingroup IxOsal + * + * @brief provides the version of the Operating System running + * + * @param osVersion - Pointer to a NULL terminated string of characters + * that holds the version of the OS running. + * This is both an input and an ouput parameter + * @param maxSize - Input parameter that defines the maximum number of + * bytes that can be stored in osVersion + * + * Returns a string of characters that describe the Operating System's version + * + * @li Reentrant: yes + * @li IRQ safe: yes + * + * return - IX_SUCCESS for successful retrieval + * - IX_FAIL if (osVersion == NULL | maxSize =< 0) + */ +PUBLIC IX_STATUS ixOsalOsVersionGet(INT8* osVersion, INT32 maxSize); + + + +/** + * @} IxOsal + */ + +#endif /* IxOsal_H */ diff --git a/drivers/net/npe/include/IxOsalAssert.h b/drivers/net/npe/include/IxOsalAssert.h new file mode 100644 index 0000000000..04a4f515aa --- /dev/null +++ b/drivers/net/npe/include/IxOsalAssert.h @@ -0,0 +1,81 @@ +/* + * @file IxOsalAssert.h + * @author Intel Corporation + * @date 25-08-2004 + * + * @brief description goes here + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_ASSERT_H +#define IX_OSAL_ASSERT_H + +/* + * Put the system defined include files required + * @par + * <TAGGED> + */ + +#include "IxOsalOsAssert.h" + +/** + * @brief Assert macro, assert the condition is true. This + * will not be compiled out. + * N.B. will result in a system crash if it is false. + */ +#define IX_OSAL_ASSERT(c) IX_OSAL_OS_ASSERT(c) + + +/** + * @brief Ensure macro, ensure the condition is true. + * This will be conditionally compiled out and + * may be used for test purposes. + */ +#ifdef IX_OSAL_ENSURE_ON +#define IX_OSAL_ENSURE(c, str) do { \ +if (!(c)) ixOsalLog (IX_OSAL_LOG_LVL_MESSAGE, IX_OSAL_LOG_DEV_STDOUT, str, \ +0, 0, 0, 0, 0, 0); } while (0) + +#else +#define IX_OSAL_ENSURE(c, str) +#endif + + +#endif /* IX_OSAL_ASSERT_H */ diff --git a/drivers/net/npe/include/IxOsalBackward.h b/drivers/net/npe/include/IxOsalBackward.h new file mode 100644 index 0000000000..ea9f30731a --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackward.h @@ -0,0 +1,65 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BACKWARD_H +#define IX_OSAL_BACKWARD_H + +#include "IxOsal.h" + +#include "IxOsalBackwardCacheMMU.h" + +#include "IxOsalBackwardOsServices.h" + +#include "IxOsalBackwardMemMap.h" + +#include "IxOsalBackwardBufferMgt.h" + +#include "IxOsalBackwardOssl.h" + +#include "IxOsalBackwardAssert.h" + +#endif /* IX_OSAL_BACKWARD_H */ diff --git a/drivers/net/npe/include/IxOsalBackwardAssert.h b/drivers/net/npe/include/IxOsalBackwardAssert.h new file mode 100644 index 0000000000..be1e27255d --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackwardAssert.h @@ -0,0 +1,54 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BACKWARD_ASSERT_H +#define IX_OSAL_BACKWARD_ASSERT_H + +#define IX_ENSURE(c, str) IX_OSAL_ENSURE(c, str) +#define IX_ASSERT(c) IX_OSAL_ASSERT(c) + +#endif /* IX_OSAL_BACKWARD_ASSERT_H */ diff --git a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h new file mode 100644 index 0000000000..4cf80d31eb --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h @@ -0,0 +1,159 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BACKWARD_BUFFER_MGT_H +#define IX_OSAL_BACKWARD_BUFFER_MGT_H + +typedef IX_OSAL_MBUF IX_MBUF; + +typedef IX_OSAL_MBUF_POOL IX_MBUF_POOL; + + +#define IX_MBUF_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr) \ + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr) + + +#define IX_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr) \ + IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr) + + +#define IX_MBUF_MDATA(m_blk_ptr) \ + IX_OSAL_MBUF_MDATA(m_blk_ptr) + + +#define IX_MBUF_MLEN(m_blk_ptr) \ + IX_OSAL_MBUF_MLEN(m_blk_ptr) + + +#define IX_MBUF_TYPE(m_blk_ptr) \ + IX_OSAL_MBUF_MTYPE(m_blk_ptr) + +/* Same as IX_MBUF_TYPE */ +#define IX_MBUF_MTYPE(m_blk_ptr) \ + IX_OSAL_MBUF_MTYPE(m_blk_ptr) + +#define IX_MBUF_FLAGS(m_blk_ptr) \ + IX_OSAL_MBUF_FLAGS(m_blk_ptr) + + +#define IX_MBUF_NET_POOL(m_blk_ptr) \ + IX_OSAL_MBUF_NET_POOL(m_blk_ptr) + + +#define IX_MBUF_PKT_LEN(m_blk_ptr) \ + IX_OSAL_MBUF_PKT_LEN(m_blk_ptr) + + +#define IX_MBUF_PRIV(m_blk_ptr) \ + IX_OSAL_MBUF_PRIV(m_blk_ptr) + + +#define IX_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr) \ + IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr) + + +#define IX_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr) \ + IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr) + + +#define IX_MBUF_POOL_SIZE_ALIGN(size) \ + IX_OSAL_MBUF_POOL_SIZE_ALIGN(size) + + +#define IX_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count) \ + IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count) + + +#define IX_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count, size) \ + IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count, size) + + +#define IX_MBUF_POOL_MBUF_AREA_ALLOC(count, memAreaSize) \ + IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC(count, memAreaSize) + + +#define IX_MBUF_POOL_DATA_AREA_ALLOC(count, size, memAreaSize) \ + IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC(count, size, memAreaSize) + +IX_STATUS +ixOsalOsIxp400BackwardPoolInit (IX_OSAL_MBUF_POOL ** poolPtrPtr, + UINT32 count, UINT32 size, const char *name); + + +/* This one needs extra steps*/ +#define IX_MBUF_POOL_INIT(poolPtr, count, size, name) \ + ixOsalOsIxp400BackwardPoolInit( poolPtr, count, size, name) + + +#define IX_MBUF_POOL_INIT_NO_ALLOC(poolPtrPtr, bufPtr, dataPtr, count, size, name) \ + (*poolPtrPtr = IX_OSAL_MBUF_NO_ALLOC_POOL_INIT(bufPtr, dataPtr, count, size, name)) + + +IX_STATUS +ixOsalOsIxp400BackwardMbufPoolGet (IX_OSAL_MBUF_POOL * poolPtr, + IX_OSAL_MBUF ** newBufPtrPtr); + +#define IX_MBUF_POOL_GET(poolPtr, bufPtrPtr) \ + ixOsalOsIxp400BackwardMbufPoolGet(poolPtr, bufPtrPtr) + + +#define IX_MBUF_POOL_PUT(bufPtr) \ + IX_OSAL_MBUF_POOL_PUT(bufPtr) + + +#define IX_MBUF_POOL_PUT_CHAIN(bufPtr) \ + IX_OSAL_MBUF_POOL_PUT_CHAIN(bufPtr) + + +#define IX_MBUF_POOL_SHOW(poolPtr) \ + IX_OSAL_MBUF_POOL_SHOW(poolPtr) + + +#define IX_MBUF_POOL_MDATA_RESET(bufPtr) \ + IX_OSAL_MBUF_POOL_MDATA_RESET(bufPtr) + +#endif /* IX_OSAL_BACKWARD_BUFFER_MGT_H */ diff --git a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h new file mode 100644 index 0000000000..fe570e6417 --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h @@ -0,0 +1,69 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BACKWARD_CACHE_MMU_H +#define IX_OSAL_BACKWARD_CACHE_MMU_H + +#ifdef IX_OSAL_CACHED +#define IX_ACC_CACHE_ENABLED +#endif + +#define IX_XSCALE_CACHE_LINE_SIZE IX_OSAL_CACHE_LINE_SIZE + +#define IX_ACC_DRV_DMA_MALLOC(size) IX_OSAL_CACHE_DMA_MALLOC(size) + +#define IX_ACC_DRV_DMA_FREE(ptr,size) IX_OSAL_CACHE_DMA_FREE(ptr) + +#define IX_MMU_VIRTUAL_TO_PHYSICAL_TRANSLATION(addr) IX_OSAL_MMU_VIRT_TO_PHYS(addr) + +#define IX_MMU_PHYSICAL_TO_VIRTUAL_TRANSLATION(addr) IX_OSAL_MMU_PHYS_TO_VIRT(addr) + +#define IX_ACC_DATA_CACHE_INVALIDATE(addr,size) IX_OSAL_CACHE_INVALIDATE(addr, size) + +#define IX_ACC_DATA_CACHE_FLUSH(addr,size) IX_OSAL_CACHE_FLUSH(addr,size) + +#endif /* IX_OSAL_BACKWARD_CACHE_MMU_H */ diff --git a/drivers/net/npe/include/IxOsalBackwardMemMap.h b/drivers/net/npe/include/IxOsalBackwardMemMap.h new file mode 100644 index 0000000000..3881a3b6da --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackwardMemMap.h @@ -0,0 +1,141 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#ifndef IX_OSAL_BACKWARD_MEM_MAP_H +#define IX_OSAL_BACKWARD_MEM_MAP_H + +#include "IxOsal.h" + +#define IX_OSSERV_SWAP_LONG(wData) IX_OSAL_SWAP_LONG(wData) +#define IX_OSSERV_SWAP_SHORT(sData) IX_OSAL_SWAP_SHORT(sData) + +#define IX_OSSERV_SWAP_SHORT_ADDRESS(sAddr) IX_OSAL_SWAP_SHORT_ADDRESS(sAddr) +#define IX_OSSERV_SWAP_BYTE_ADDRESS(bAddr) IX_OSAL_SWAP_BYTE_ADDRESS(bAddr) + +#define IX_OSSERV_BE_XSTOBUSL(wData) IX_OSAL_BE_XSTOBUSL(wData) +#define IX_OSSERV_BE_XSTOBUSS(sData) IX_OSAL_BE_XSTOBUSS(sData) +#define IX_OSSERV_BE_XSTOBUSB(bData) IX_OSAL_BE_XSTOBUSB(bData) +#define IX_OSSERV_BE_BUSTOXSL(wData) IX_OSAL_BE_BUSTOXSL(wData) +#define IX_OSSERV_BE_BUSTOXSS(sData) IX_OSAL_BE_BUSTOXSS(sData) +#define IX_OSSERV_BE_BUSTOXSB(bData) IX_OSAL_BE_BUSTOXSB(bData) + +#define IX_OSSERV_LE_AC_XSTOBUSL(wAddr) IX_OSAL_LE_AC_XSTOBUSL(wAddr) +#define IX_OSSERV_LE_AC_XSTOBUSS(sAddr) IX_OSAL_LE_AC_XSTOBUSS(sAddr) +#define IX_OSSERV_LE_AC_XSTOBUSB(bAddr) IX_OSAL_LE_AC_XSTOBUSB(bAddr) +#define IX_OSSERV_LE_AC_BUSTOXSL(wAddr) IX_OSAL_LE_AC_BUSTOXSL(wAddr) +#define IX_OSSERV_LE_AC_BUSTOXSS(sAddr) IX_OSAL_LE_AC_BUSTOXSS(sAddr) +#define IX_OSSERV_LE_AC_BUSTOXSB(bAddr) IX_OSAL_LE_AC_BUSTOXSB(bAddr) + +#define IX_OSSERV_LE_DC_XSTOBUSL(wData) IX_OSAL_LE_DC_XSTOBUSL(wData) +#define IX_OSSERV_LE_DC_XSTOBUSS(sData) IX_OSAL_LE_DC_XSTOBUSS(sData) +#define IX_OSSERV_LE_DC_XSTOBUSB(bData) IX_OSAL_LE_DC_XSTOBUSB(bData) +#define IX_OSSERV_LE_DC_BUSTOXSL(wData) IX_OSAL_LE_DC_BUSTOXSL(wData) +#define IX_OSSERV_LE_DC_BUSTOXSS(sData) IX_OSAL_LE_DC_BUSTOXSS(sData) +#define IX_OSSERV_LE_DC_BUSTOXSB(bData) IX_OSAL_LE_DC_BUSTOXSB(bData) + +#define IX_OSSERV_READ_LONG(wAddr) IX_OSAL_READ_LONG(wAddr) +#define IX_OSSERV_READ_SHORT(sAddr) IX_OSAL_READ_SHORT(sAddr) +#define IX_OSSERV_READ_BYTE(bAddr) IX_OSAL_READ_BYTE(bAddr) +#define IX_OSSERV_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG(wAddr, wData) +#define IX_OSSERV_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT(sAddr, sData) +#define IX_OSSERV_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE(bAddr, bData) + + +#define IX_OSSERV_READ_NPE_SHARED_LONG(wAddr) IX_OSAL_READ_BE_SHARED_LONG(wAddr) +#define IX_OSSERV_READ_NPE_SHARED_SHORT(sAddr) IX_OSAL_READ_BE_SHARED_SHORT(sAddr) +#define IX_OSSERV_WRITE_NPE_SHARED_LONG(wAddr, wData) IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData) +#define IX_OSSERV_WRITE_NPE_SHARED_SHORT(sAddr, sData) IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData) + +#define IX_OSSERV_SWAP_NPE_SHARED_LONG(wData) IX_OSAL_SWAP_BE_SHARED_LONG(wData) +#define IX_OSSERV_SWAP_NPE_SHARED_SHORT(sData) IX_OSAL_SWAP_BE_SHARED_SHORT(sData) + + +/* Map osServ address/size */ +#define IX_OSSERV_QMGR_MAP_SIZE IX_OSAL_IXP400_QMGR_MAP_SIZE +#define IX_OSSERV_EXP_REG_MAP_SIZE IX_OSAL_IXP400_EXP_REG_MAP_SIZE +#define IX_OSSERV_UART1_MAP_SIZE IX_OSAL_IXP400_UART1_MAP_SIZE +#define IX_OSSERV_UART2_MAP_SIZE IX_OSAL_IXP400_UART2_MAP_SIZE +#define IX_OSSERV_PMU_MAP_SIZE IX_OSAL_IXP400_PMU_MAP_SIZE +#define IX_OSSERV_OSTS_MAP_SIZE IX_OSAL_IXP400_OSTS_MAP_SIZE +#define IX_OSSERV_NPEA_MAP_SIZE IX_OSAL_IXP400_NPEA_MAP_SIZE +#define IX_OSSERV_NPEB_MAP_SIZE IX_OSAL_IXP400_NPEB_MAP_SIZE +#define IX_OSSERV_NPEC_MAP_SIZE IX_OSAL_IXP400_NPEC_MAP_SIZE +#define IX_OSSERV_ETHA_MAP_SIZE IX_OSAL_IXP400_ETHA_MAP_SIZE +#define IX_OSSERV_ETHB_MAP_SIZE IX_OSAL_IXP400_ETHB_MAP_SIZE +#define IX_OSSERV_USB_MAP_SIZE IX_OSAL_IXP400_USB_MAP_SIZE +#define IX_OSSERV_GPIO_MAP_SIZE IX_OSAL_IXP400_GPIO_MAP_SIZE +#define IX_OSSERV_EXP_BUS_MAP_SIZE IX_OSAL_IXP400_EXP_BUS_MAP_SIZE +#define IX_OSSERV_EXP_BUS_CS0_MAP_SIZE IX_OSAL_IXP400_EXP_BUS_CS0_MAP_SIZE +#define IX_OSSERV_EXP_BUS_CS1_MAP_SIZE IX_OSAL_IXP400_EXP_BUS_CS1_MAP_SIZE +#define IX_OSSERV_EXP_BUS_CS4_MAP_SIZE IX_OSAL_IXP400_EXP_BUS_CS4_MAP_SIZE + + +#define IX_OSSERV_GPIO_PHYS_BASE IX_OSAL_IXP400_GPIO_PHYS_BASE +#define IX_OSSERV_UART1_PHYS_BASE IX_OSAL_IXP400_UART1_PHYS_BASE +#define IX_OSSERV_UART2_PHYS_BASE IX_OSAL_IXP400_UART2_PHYS_BASE +#define IX_OSSERV_ETHA_PHYS_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE +#define IX_OSSERV_ETHB_PHYS_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE +#define IX_OSSERV_NPEA_PHYS_BASE IX_OSAL_IXP400_NPEA_PHYS_BASE +#define IX_OSSERV_NPEB_PHYS_BASE IX_OSAL_IXP400_NPEB_PHYS_BASE +#define IX_OSSERV_NPEC_PHYS_BASE IX_OSAL_IXP400_NPEC_PHYS_BASE +#define IX_OSSERV_PERIPHERAL_PHYS_BASE IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE +#define IX_OSSERV_QMGR_PHYS_BASE IX_OSAL_IXP400_QMGR_PHYS_BASE +#define IX_OSSERV_OSTS_PHYS_BASE IX_OSAL_IXP400_OSTS_PHYS_BASE +#define IX_OSSERV_USB_PHYS_BASE IX_OSAL_IXP400_USB_PHYS_BASE +#define IX_OSSERV_EXP_BUS_PHYS_BASE IX_OSAL_IXP400_EXP_BUS_PHYS_BASE +#define IX_OSSERV_EXP_BUS_BOOT_PHYS_BASE IX_OSAL_IXP400_EXP_BUS_BOOT_PHYS_BASE +#define IX_OSSERV_EXP_BUS_CS0_PHYS_BASE IX_OSAL_IXP400_EXP_BUS_CS0_PHYS_BASE +#define IX_OSSERV_EXP_BUS_CS1_PHYS_BASE IX_OSAL_IXP400_EXP_BUS_CS1_PHYS_BASE +#define IX_OSSERV_EXP_BUS_CS4_PHYS_BASE IX_OSAL_IXP400_EXP_BUS_CS4_PHYS_BASE +#define IX_OSSERV_EXP_BUS_REGS_PHYS_BASE IX_OSAL_IXP400_EXP_BUS_REGS_PHYS_BASE + +#define IX_OSSERV_MEM_MAP(physAddr, size) IX_OSAL_MEM_MAP(physAddr, size) + +#define IX_OSSERV_MEM_UNMAP(virtAddr) IX_OSAL_MEM_UNMAP(virtAddr) + +#endif /* IX_OSAL_BACKWARD_MEM_MAP_H */ diff --git a/drivers/net/npe/include/IxOsalBackwardOsServices.h b/drivers/net/npe/include/IxOsalBackwardOsServices.h new file mode 100644 index 0000000000..0ccff84aee --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackwardOsServices.h @@ -0,0 +1,125 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BACKWARD_OSSERVICES_H +#define IX_OSAL_BACKWARD_OSSERVICES_H + +#ifndef __vxworks +typedef UINT32 IX_IRQ_STATUS; +#else +typedef int IX_IRQ_STATUS; +#endif + +typedef IxOsalMutex IxMutex; + +typedef IxOsalFastMutex IxFastMutex; + +typedef IxOsalVoidFnVoidPtr IxVoidFnVoidPtr; + +typedef IxOsalVoidFnPtr IxVoidFnPtr; + + +#define LOG_NONE IX_OSAL_LOG_LVL_NONE +#define LOG_USER IX_OSAL_LOG_LVL_USER +#define LOG_FATAL IX_OSAL_LOG_LVL_FATAL +#define LOG_ERROR IX_OSAL_LOG_LVL_ERROR +#define LOG_WARNING IX_OSAL_LOG_LVL_WARNING +#define LOG_MESSAGE IX_OSAL_LOG_LVL_MESSAGE +#define LOG_DEBUG1 IX_OSAL_LOG_LVL_DEBUG1 +#define LOG_DEBUG2 IX_OSAL_LOG_LVL_DEBUG2 +#define LOG_DEBUG3 IX_OSAL_LOG_LVL_DEBUG3 +#ifndef __vxworks +#define LOG_ALL IX_OSAL_LOG_LVL_ALL +#endif + +PUBLIC IX_STATUS +ixOsServIntBind (int level, void (*routine) (void *), void *parameter); + +PUBLIC IX_STATUS ixOsServIntUnbind (int level); + + +PUBLIC int ixOsServIntLock (void); + +PUBLIC void ixOsServIntUnlock (int lockKey); + + +PUBLIC int ixOsServIntLevelSet (int level); + +PUBLIC IX_STATUS ixOsServMutexInit (IxMutex * mutex); + +PUBLIC IX_STATUS ixOsServMutexLock (IxMutex * mutex); + +PUBLIC IX_STATUS ixOsServMutexUnlock (IxMutex * mutex); + +PUBLIC IX_STATUS ixOsServMutexDestroy (IxMutex * mutex); + +PUBLIC IX_STATUS ixOsServFastMutexInit (IxFastMutex * mutex); + +PUBLIC IX_STATUS ixOsServFastMutexTryLock (IxFastMutex * mutex); + +PUBLIC IX_STATUS ixOsServFastMutexUnlock (IxFastMutex * mutex); + +PUBLIC int +ixOsServLog (int level, char *format, int arg1, int arg2, int arg3, int arg4, + int arg5, int arg6); + + +PUBLIC int ixOsServLogLevelSet (int level); + +PUBLIC void ixOsServSleep (int microseconds); + +PUBLIC void ixOsServTaskSleep (int milliseconds); + +PUBLIC unsigned int ixOsServTimestampGet (void); + + +PUBLIC void ixOsServUnload (void); + +PUBLIC void ixOsServYield (void); + +#endif +/* IX_OSAL_BACKWARD_OSSERVICES_H */ diff --git a/drivers/net/npe/include/IxOsalBackwardOssl.h b/drivers/net/npe/include/IxOsalBackwardOssl.h new file mode 100644 index 0000000000..634b494aec --- /dev/null +++ b/drivers/net/npe/include/IxOsalBackwardOssl.h @@ -0,0 +1,272 @@ +/** + * This file is intended to provide backward + * compatibility for main osService/OSSL + * APIs. + * + * It shall be phased out gradually and users + * are strongly recommended to use IX_OSAL API. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BACKWARD_OSSL_H +#define IX_OSAL_BACKWARD_OSSL_H + + +typedef IxOsalThread ix_ossl_thread_t; + +typedef IxOsalSemaphore ix_ossl_sem_t; + +typedef IxOsalMutex ix_ossl_mutex_t; + +typedef IxOsalTimeval ix_ossl_time_t; + + +/* Map sub-fields for ix_ossl_time_t */ +#define tv_sec secs +#define tv_nec nsecs + + +typedef IX_STATUS ix_error; + +typedef UINT32 ix_ossl_thread_priority; + +typedef UINT32 ix_uint32; + + +#define IX_OSSL_ERROR_SUCCESS IX_SUCCESS + +#define IX_ERROR_SUCCESS IX_SUCCESS + + +typedef enum +{ + IX_OSSL_SEM_UNAVAILABLE = 0, + IX_OSSL_SEM_AVAILABLE +} ix_ossl_sem_state; + + +typedef enum +{ + IX_OSSL_MUTEX_UNLOCK = 0, + IX_OSSL_MUTEX_LOCK +} ix_ossl_mutex_state; + + +typedef IxOsalVoidFnVoidPtr ix_ossl_thread_entry_point_t; + + +#define IX_OSSL_THREAD_PRI_HIGH 90 +#define IX_OSSL_THREAD_PRI_MEDIUM 160 +#define IX_OSSL_THREAD_PRI_LOW 240 + + +#define IX_OSSL_WAIT_FOREVER IX_OSAL_WAIT_FOREVER + +#define IX_OSSL_WAIT_NONE IX_OSAL_WAIT_NONE + +#define BILLION IX_OSAL_BILLION + +#define IX_OSSL_TIME_EQ(a,b) IX_OSAL_TIME_EQ(a,b) + +#define IX_OSSL_TIME_GT(a,b) IX_OSAL_TIME_GT(a,b) + +#define IX_OSSL_TIME_LT(a,b) IX_OSAL_TIME_LT(a,b) + +#define IX_OSSL_TIME_ADD(a,b) IX_OSAL_TIME_ADD(a,b) + +#define IX_OSSL_TIME_SUB(a,b) IX_OSAL_TIME_SUB(a,b) + + +/* a is tick, b is timeval */ +#define IX_OSSL_TIME_CONVERT_TO_TICK(a,b) \ + (a) = IX_OSAL_TIMEVAL_TO_TICKS(b) + + + + +PUBLIC IX_STATUS +ixOsalOsIxp400BackwardOsslThreadCreate (IxOsalVoidFnVoidPtr entryPoint, + void *arg, IxOsalThread * ptrThread); + +#define ix_ossl_thread_create(entryPoint, arg, ptrTid) \ + ixOsalOsIxp400BackwardOsslThreadCreate(entryPoint, arg, ptrTid) + + +/* void ix_ossl_thread_exit(ix_error retError, void* retObj) */ +#define ix_ossl_thread_exit(retError, retObj) \ + ixOsalThreadExit() + + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslThreadKill (IxOsalThread tid); + +/* ix_error ix_ossl_thread_kill(tid) */ +#define ix_ossl_thread_kill(tid) \ + ixOsalOsIxp400BackwardOsslThreadKill(tid) + + +PUBLIC IX_STATUS +ixOsalOsIxp400BackwardOsslThreadSetPriority (IxOsalThread tid, + UINT32 priority); + + +/* + * ix_error ix_ossl_thread_set_priority(ix_ossl_thread_t tid, + * ix_ossl_thread_priority priority + * ); + */ + +#define ix_ossl_thread_set_priority(tid, priority) \ + ixOsalOsIxp400BackwardOsslThreadSetPriority(tid, priority) + + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslTickGet (int *pticks); + +#define ix_ossl_tick_get(pticks) \ + ixOsalOsIxp400BackwardOsslTickGet(pticks) + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslThreadDelay (int ticks); + +#define ix_ossl_thread_delay(ticks) ixOsalOsIxp400BackwardOsslThreadDelay(ticks) + + + +/* ix_error ix_ossl_sem_init(int start_value, ix_ossl_sem_t* sid); */ +/* Note sid is a pointer to semaphore */ +#define ix_ossl_sem_init(value, sid) \ + ixOsalSemaphoreInit(sid, value) + + +PUBLIC IX_STATUS +ixOsalOsIxp400BackwardOsslSemaphoreWait (IxOsalSemaphore semaphore, + INT32 timeout); + + +/* +ix_error ix_ossl_sem_take( + ix_ossl_sem_t sid, + ix_uint32 timeout + ); +*/ + +#define ix_ossl_sem_take( sid, timeout) \ + ixOsalOsIxp400BackwardOsslSemaphoreWait(sid, timeout) + + + +PUBLIC IX_STATUS +ixOsalOsIxp400BackwardOsslSemaphorePost (IxOsalSemaphore sid); + +/*ix_error ix_ossl_sem_give(ix_ossl_sem_t sid); */ +#define ix_ossl_sem_give(sid) \ + ixOsalOsIxp400BackwardOsslSemaphorePost(sid); + + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardSemaphoreDestroy (IxOsalSemaphore sid); + +#define ix_ossl_sem_fini(sid) \ + ixOsalOsIxp400BackwardSemaphoreDestroy(sid) + + +PUBLIC IX_STATUS +ixOsalOsIxp400BackwardOsslMutexInit (ix_ossl_mutex_state start_state, + IxOsalMutex * pMutex); + + +/* ix_error ix_ossl_mutex_init(ix_ossl_mutex_state start_state, ix_ossl_mutex_t* mid); */ +#define ix_ossl_mutex_init(start_state, pMutex) \ + ixOsalOsIxp400BackwardOsslMutexInit(start_state, pMutex) + + +PUBLIC IX_STATUS +ixOsalOsIxp400BackwardOsslMutexLock (IxOsalMutex mid, INT32 timeout); + +/* +ix_error ix_ossl_mutex_lock( + ix_ossl_mutex_t mid, + ix_uint32 timeout + ); +*/ +#define ix_ossl_mutex_lock(mid, timeout) \ + ixOsalOsIxp400BackwardOsslMutexLock(mid, timout) + + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslMutexUnlock (IxOsalMutex mid); + +/* ix_error ix_ossl_mutex_unlock(ix_ossl_mutex_t mid); */ +#define ix_ossl_mutex_unlock(mid) \ + ixOsalOsIxp400BackwardOsslMutexUnlock(mid) + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslMutexDestroy (IxOsalMutex mid); + +#define ix_ossl_mutex_fini(mid) \ + ixOsalOsIxp400BackwardOsslMutexDestroy(mid); + +#define ix_ossl_sleep(sleeptime_ms) \ + ixOsalSleep(sleeptime_ms) + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslSleepTick (UINT32 ticks); + +#define ix_ossl_sleep_tick(sleeptime_ticks) \ + ixOsalOsIxp400BackwardOsslSleepTick(sleeptime_ticks) + + +PUBLIC IX_STATUS ixOsalOsIxp400BackwardOsslTimeGet (IxOsalTimeval * pTv); + +#define ix_ossl_time_get(pTv) \ + ixOsalOsIxp400BackwardOsslTimeGet(pTv) + + +typedef UINT32 ix_ossl_size_t; + +#define ix_ossl_malloc(arg_size) \ + ixOsalMemAlloc(arg_size) + +#define ix_ossl_free(arg_pMemory) \ + ixOsalMemFree(arg_pMemory) + + +#define ix_ossl_memcpy(arg_pDest, arg_pSrc,arg_Count) \ + ixOsalMemCopy(arg_pDest, arg_pSrc,arg_Count) + +#define ix_ossl_memset(arg_pDest, arg_pChar, arg_Count) \ + ixOsalMemSet(arg_pDest, arg_pChar, arg_Count) + + +#endif /* IX_OSAL_BACKWARD_OSSL_H */ diff --git a/drivers/net/npe/include/IxOsalBufferMgt.h b/drivers/net/npe/include/IxOsalBufferMgt.h new file mode 100644 index 0000000000..497ed04710 --- /dev/null +++ b/drivers/net/npe/include/IxOsalBufferMgt.h @@ -0,0 +1,621 @@ +/** + * @file IxOsalBufferMgt.h + * + * @brief OSAL Buffer pool management and buffer management definitions. + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ +/* @par + * -- Copyright Notice -- + * + * @par + * Copyright 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 + * The Regents of the University of California. All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalBufferMgt_H +#define IxOsalBufferMgt_H + +#include "IxOsal.h" +/** + * @defgroup IxOsalBufferMgt OSAL Buffer Management Module. + * + * @brief Buffer management module for IxOsal + * + * @{ + */ + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_MAX_POOLS + * + * @brief The maximum number of pools that can be allocated, must be + * a multiple of 32 as required by implementation logic. + * @note This can safely be increased if more pools are required. + */ +#define IX_OSAL_MBUF_MAX_POOLS 32 + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_NAME_LEN + * + * @brief The maximum string length of the pool name + */ +#define IX_OSAL_MBUF_POOL_NAME_LEN 64 + + + +/** + * Define IX_OSAL_MBUF + */ + + +/* forward declaration of internal structure */ +struct __IXP_BUF; + +/* + * OS can define it in IxOsalOs.h to skip the following + * definition. + */ +#ifndef IX_OSAL_ATTRIBUTE_ALIGN32 +#define IX_OSAL_ATTRIBUTE_ALIGN32 __attribute__ ((aligned(32))) +#endif + +/* release v1.4 backward compatible definitions */ +struct __IX_MBUF +{ + struct __IXP_BUF *ix_next IX_OSAL_ATTRIBUTE_ALIGN32; + struct __IXP_BUF *ix_nextPacket; + UINT8 *ix_data; + UINT32 ix_len; + unsigned char ix_type; + unsigned char ix_flags; + unsigned short ix_reserved; + UINT32 ix_rsvd; + UINT32 ix_PktLen; + void *ix_priv; +}; + +struct __IX_CTRL +{ + UINT32 ix_reserved[2]; /**< Reserved field */ + UINT32 ix_signature; /**< Field to indicate if buffers are allocated by the system */ + UINT32 ix_allocated_len; /**< Allocated buffer length */ + UINT32 ix_allocated_data; /**< Allocated buffer data pointer */ + void *ix_pool; /**< pointer to the buffer pool */ + struct __IXP_BUF *ix_chain; /**< chaining */ + void *ix_osbuf_ptr; /**< Storage for OS-specific buffer pointer */ +}; + +struct __IX_NE_SHARED +{ + UINT32 reserved[8] IX_OSAL_ATTRIBUTE_ALIGN32; /**< Reserved area for NPE Service-specific usage */ +}; + + +/* + * IXP buffer structure + */ +typedef struct __IXP_BUF +{ + struct __IX_MBUF ix_mbuf IX_OSAL_ATTRIBUTE_ALIGN32; /**< buffer header */ + struct __IX_CTRL ix_ctrl; /**< buffer management */ + struct __IX_NE_SHARED ix_ne; /**< Reserved area for NPE Service-specific usage*/ +} IXP_BUF; + + + +/** + * @ingroup IxOsalBufferMgt + * + * @def typedef IX_OSAL_MBUF + * + * @brief Generic IXP mbuf format. + */ +typedef IXP_BUF IX_OSAL_MBUF; + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_IXP_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr) + * + * @brief Return pointer to the next mbuf in a single packet + */ +#define IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_next + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr) + * + * @brief Return pointer to the next packet in the chain + */ +#define IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_nextPacket + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_MDATA(m_blk_ptr) + * + * @brief Return pointer to the data in the mbuf + */ +#define IX_OSAL_MBUF_MDATA(m_blk_ptr) (m_blk_ptr)->ix_mbuf.ix_data + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_MLEN(m_blk_ptr) + * + * @brief Return the data length + */ +#define IX_OSAL_MBUF_MLEN(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_len + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_MTYPE(m_blk_ptr) + * + * @brief Return the data type in the mbuf + */ +#define IX_OSAL_MBUF_MTYPE(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_type + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_FLAGS(m_blk_ptr) + * + * @brief Return the buffer flags + */ +#define IX_OSAL_MBUF_FLAGS(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_flags + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_NET_POOL(m_blk_ptr) + * + * @brief Return pointer to a network pool + */ +#define IX_OSAL_MBUF_NET_POOL(m_blk_ptr) \ + (m_blk_ptr)->ix_ctrl.ix_pool + + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_PKT_LEN(m_blk_ptr) + * + * @brief Return the total length of all the data in + * the mbuf chain for this packet + */ +#define IX_OSAL_MBUF_PKT_LEN(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_PktLen + + + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_PRIV(m_blk_ptr) + * + * @brief Return the private field + */ +#define IX_OSAL_MBUF_PRIV(m_blk_ptr) \ + (m_blk_ptr)->ix_mbuf.ix_priv + + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_SIGNATURE(m_blk_ptr) + * + * @brief Return the signature field of IX_OSAL_MBUF + */ +#define IX_OSAL_MBUF_SIGNATURE(m_blk_ptr) \ + (m_blk_ptr)->ix_ctrl.ix_signature + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_OSBUF_PTR(m_blk_ptr) + * + * @brief Return ix_osbuf_ptr field of IX_OSAL_MBUF, which is used to store OS-specific buffer pointer during a buffer conversion. + */ +#define IX_OSAL_MBUF_OSBUF_PTR(m_blk_ptr) \ + (m_blk_ptr)->ix_ctrl.ix_osbuf_ptr + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr) + * + * @brief Return the allocated buffer size + */ +#define IX_OSAL_MBUF_ALLOCATED_BUFF_LEN(m_blk_ptr) \ + (m_blk_ptr)->ix_ctrl.ix_allocated_len + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr) + * + * @brief Return the allocated buffer pointer + */ +#define IX_OSAL_MBUF_ALLOCATED_BUFF_DATA(m_blk_ptr) \ + (m_blk_ptr)->ix_ctrl.ix_allocated_data + + + +/* Name length */ +#define IX_OSAL_MBUF_POOL_NAME_LEN 64 + + +/**************************************************** + * Macros for buffer pool management + ****************************************************/ + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_FREE_COUNT(m_pool_ptr + * + * @brief Return the total number of freed buffers left in the pool. + */ +#define IX_OSAL_MBUF_POOL_FREE_COUNT(m_pool_ptr) \ + ixOsalBuffPoolFreeCountGet(m_pool_ptr) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_SIZE_ALIGN + * + * @brief This macro takes an integer as an argument and + * rounds it up to be a multiple of the memory cache-line + * size. + * + * @param int [in] size - the size integer to be rounded up + * + * @return int - the size, rounded up to a multiple of + * the cache-line size + */ +#define IX_OSAL_MBUF_POOL_SIZE_ALIGN(size) \ + ((((size) + (IX_OSAL_CACHE_LINE_SIZE - 1)) / \ + IX_OSAL_CACHE_LINE_SIZE) * \ + IX_OSAL_CACHE_LINE_SIZE) + +/* Don't use this directly, use macro */ +PUBLIC UINT32 ixOsalBuffPoolMbufAreaSizeGet (int count); + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED + * + * @brief This macro calculates, from the number of mbufs required, the + * size of the memory area required to contain the mbuf headers for the + * buffers in the pool. The size to be used for each mbuf header is + * rounded up to a multiple of the cache-line size, to ensure + * each mbuf header aligns on a cache-line boundary. + * This macro is used by IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC() + * + * @param int [in] count - the number of buffers the pool will contain + * + * @return int - the total size required for the pool mbuf area (aligned) + */ +#define IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count) \ + ixOsalBuffPoolMbufAreaSizeGet(count) + + +/* Don't use this directly, use macro */ +PUBLIC UINT32 ixOsalBuffPoolDataAreaSizeGet (int count, int size); + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED + * + * @brief This macro calculates, from the number of mbufs required and the + * size of the data portion for each mbuf, the size of the data memory area + * required. The size is adjusted to ensure alignment on cache line boundaries. + * This macro is used by IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC() + * + * + * @param int [in] count - The number of mbufs in the pool. + * @param int [in] size - The desired size for each mbuf data portion. + * This size will be rounded up to a multiple of the + * cache-line size to ensure alignment on cache-line + * boundaries for each data block. + * + * @return int - the total size required for the pool data area (aligned) + */ +#define IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count, size) \ + ixOsalBuffPoolDataAreaSizeGet((count), (size)) + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC + * + * @brief Allocates the memory area needed for the number of mbuf headers + * specified by <i>count</i>. + * This macro ensures the mbuf headers align on cache line boundaries. + * This macro evaluates to a pointer to the memory allocated. + * + * @param int [in] count - the number of mbufs the pool will contain + * @param int [out] memAreaSize - the total amount of memory allocated + * + * @return void * - a pointer to the allocated memory area + */ +#define IX_OSAL_MBUF_POOL_MBUF_AREA_ALLOC(count, memAreaSize) \ + IX_OSAL_CACHE_DMA_MALLOC((memAreaSize = \ + IX_OSAL_MBUF_POOL_MBUF_AREA_SIZE_ALIGNED(count))) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC + * + * @brief Allocates the memory pool for the data portion of the pool mbufs. + * The number of mbufs is specified by <i>count</i>. The size of the data + * portion of each mbuf is specified by <i>size</i>. + * This macro ensures the mbufs are aligned on cache line boundaries + * This macro evaluates to a pointer to the memory allocated. + * + * @param int [in] count - the number of mbufs the pool will contain + * @param int [in] size - the desired size (in bytes) required for the data + * portion of each mbuf. Note that this size may be + * rounded up to ensure alignment on cache-line + * boundaries. + * @param int [out] memAreaSize - the total amount of memory allocated + * + * @return void * - a pointer to the allocated memory area + */ +#define IX_OSAL_MBUF_POOL_DATA_AREA_ALLOC(count, size, memAreaSize) \ + IX_OSAL_CACHE_DMA_MALLOC((memAreaSize = \ + IX_OSAL_MBUF_POOL_DATA_AREA_SIZE_ALIGNED(count,size))) + + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_INIT + * + * @brief Wrapper macro for ixOsalPoolInit() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_INIT(count, size, name) \ + ixOsalPoolInit((count), (size), (name)) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_NO_ALLOC_POOL_INIT + * + * @return Pointer to the new pool or NULL if the initialization failed. + * + * @brief Wrapper macro for ixOsalNoAllocPoolInit() + * See function description below for details. + * + */ +#define IX_OSAL_MBUF_NO_ALLOC_POOL_INIT(bufPtr, dataPtr, count, size, name) \ + ixOsalNoAllocPoolInit( (bufPtr), (dataPtr), (count), (size), (name)) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_GET + * + * @brief Wrapper macro for ixOsalMbufAlloc() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_GET(poolPtr) \ + ixOsalMbufAlloc(poolPtr) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_PUT + * + * @brief Wrapper macro for ixOsalMbufFree() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_PUT(bufPtr) \ + ixOsalMbufFree(bufPtr) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_PUT_CHAIN + * + * @brief Wrapper macro for ixOsalMbufChainFree() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_PUT_CHAIN(bufPtr) \ + ixOsalMbufChainFree(bufPtr) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_SHOW + * + * @brief Wrapper macro for ixOsalMbufPoolShow() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_SHOW(poolPtr) \ + ixOsalMbufPoolShow(poolPtr) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_MDATA_RESET + * + * @brief Wrapper macro for ixOsalMbufDataPtrReset() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_MDATA_RESET(bufPtr) \ + ixOsalMbufDataPtrReset(bufPtr) + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_MBUF_POOL_UNINIT + * + * @brief Wrapper macro for ixOsalBuffPoolUninit() + * See function description below for details. + */ +#define IX_OSAL_MBUF_POOL_UNINIT(m_pool_ptr) \ + ixOsalBuffPoolUninit(m_pool_ptr) + +/* + * Include OS-specific bufferMgt definitions + */ +#include "IxOsalOsBufferMgt.h" + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr) + * + * @brief Convert pre-allocated os-specific buffer format to OSAL IXP_BUF (IX_OSAL_MBUF) format. + * It is users' responsibility to provide pre-allocated and valid buffer pointers. + * @param osBufPtr (in) - a pre-allocated os-specific buffer pointer. + * @param ixpBufPtr (in)- a pre-allocated OSAL IXP_BUF pointer + * @return None + */ +#define IX_OSAL_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr) \ + IX_OSAL_OS_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr) + + +/** + * @ingroup IxOsalBufferMgt + * + * @def IX_OSAL_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr) + * + * @brief Convert pre-allocated OSAL IXP_BUF (IX_OSAL_MBUF) format to os-specific buffer pointers. + * @param ixpBufPtr (in) - OSAL IXP_BUF pointer + * @param osBufPtr (out) - os-specific buffer pointer. + * @return None + */ + +#define IX_OSAL_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr) \ + IX_OSAL_OS_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr) + + +PUBLIC IX_OSAL_MBUF_POOL *ixOsalPoolInit (UINT32 count, + UINT32 size, const char *name); + +PUBLIC IX_OSAL_MBUF_POOL *ixOsalNoAllocPoolInit (void *poolBufPtr, + void *poolDataPtr, + UINT32 count, + UINT32 size, + const char *name); + +PUBLIC IX_OSAL_MBUF *ixOsalMbufAlloc (IX_OSAL_MBUF_POOL * pool); + +PUBLIC IX_OSAL_MBUF *ixOsalMbufFree (IX_OSAL_MBUF * mbuf); + +PUBLIC void ixOsalMbufChainFree (IX_OSAL_MBUF * mbuf); + +PUBLIC void ixOsalMbufDataPtrReset (IX_OSAL_MBUF * mbuf); + +PUBLIC void ixOsalMbufPoolShow (IX_OSAL_MBUF_POOL * pool); + +PUBLIC IX_STATUS ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool); + +PUBLIC UINT32 ixOsalBuffPoolFreeCountGet(IX_OSAL_MBUF_POOL * pool); + + +/** + * @} IxOsalBufferMgt + */ + + +#endif /* IxOsalBufferMgt_H */ diff --git a/drivers/net/npe/include/IxOsalBufferMgtDefault.h b/drivers/net/npe/include/IxOsalBufferMgtDefault.h new file mode 100644 index 0000000000..684b52edb4 --- /dev/null +++ b/drivers/net/npe/include/IxOsalBufferMgtDefault.h @@ -0,0 +1,88 @@ +/** + * @file IxOsalBufferMgtDefault.h + * + * @brief Default buffer pool management and buffer management + * definitions. + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IX_OSAL_BUFFER_MGT_DEFAULT_H +#define IX_OSAL_BUFFER_MGT_DEFAULT_H + +/** + * @enum IxMbufPoolAllocationType + * @brief Used to indicate how the pool memory was allocated + */ + +typedef enum +{ + IX_OSAL_MBUF_POOL_TYPE_SYS_ALLOC = 0, /**< mbuf pool allocated by the system */ + IX_OSAL_MBUF_POOL_TYPE_USER_ALLOC /**< mbuf pool allocated by the user */ +} IxOsalMbufPoolAllocationType; + + +/** + * @brief Implementation of buffer pool structure for use with non-VxWorks OS + */ + +typedef struct +{ + IX_OSAL_MBUF *nextFreeBuf; /**< Pointer to the next free mbuf */ + void *mbufMemPtr; /**< Pointer to the mbuf memory area */ + void *dataMemPtr; /**< Pointer to the data memory area */ + int bufDataSize; /**< The size of the data portion of each mbuf */ + int totalBufsInPool; /**< Total number of mbufs in the pool */ + int freeBufsInPool; /**< Number of free mbufs currently in the pool */ + int mbufMemSize; /**< The size of the pool mbuf memory area */ + int dataMemSize; /**< The size of the pool data memory area */ + char name[IX_OSAL_MBUF_POOL_NAME_LEN + 1]; /**< Descriptive name for pool */ + IxOsalMbufPoolAllocationType poolAllocType; + unsigned int poolIdx; /**< Pool Index */ +} IxOsalMbufPool; + +typedef IxOsalMbufPool IX_OSAL_MBUF_POOL; + + +PUBLIC IX_STATUS ixOsalBuffPoolUninit (IX_OSAL_MBUF_POOL * pool); + + +#endif /* IX_OSAL_BUFFER_MGT_DEFAULT_H */ diff --git a/drivers/net/npe/include/IxOsalConfig.h b/drivers/net/npe/include/IxOsalConfig.h new file mode 100644 index 0000000000..d56e796393 --- /dev/null +++ b/drivers/net/npe/include/IxOsalConfig.h @@ -0,0 +1,76 @@ +/** + * @file IxOsalConfig.h + * + * @brief OSAL Configuration header file + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/* + * This file contains user-editable fields for modules inclusion. + */ +#ifndef IxOsalConfig_H +#define IxOsalConfig_H + + +/* + * Note: in the future these config options may + * become build time decision. + */ + +/* Choose cache */ +#define IX_OSAL_CACHED +/* #define IX_OSAL_UNCACHED */ + + +/* + * Select the module headers to include + */ +#include "IxOsalIoMem.h" /* I/O Memory Management module API */ +#include "IxOsalBufferMgt.h" /* Buffer Management module API */ + +/* + * Select main platform header file to use + */ +#include "IxOsalOem.h" + + + +#endif /* IxOsalConfig_H */ diff --git a/drivers/net/npe/include/IxOsalEndianess.h b/drivers/net/npe/include/IxOsalEndianess.h new file mode 100644 index 0000000000..3b1c739474 --- /dev/null +++ b/drivers/net/npe/include/IxOsalEndianess.h @@ -0,0 +1,134 @@ +/** + * @file IxOsalEndianess.h (Obsolete file) + * + * @brief Header file for determining system endianess and OS + * + * @par + * @version $Revision: 1.1 + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#ifndef IxOsalEndianess_H +#define IxOsalEndianess_H + +#if defined (__vxworks) || defined (__linux) + +/* get ntohl/ntohs/htohl/htons macros and CPU definitions for VxWorks */ +/* #include <netinet/in.h> */ + +#elif defined (__wince) + +/* get ntohl/ntohs/htohl/htons macros definitions for WinCE */ +#include <Winsock2.h> + +#else + +#error Unknown OS, please add a section with the include file for htonl/htons/ntohl/ntohs + +#endif /* vxworks or linux or wince */ + +/* Compiler specific endianness selector - WARNING this works only with arm gcc, use appropriate defines with diab */ + +#ifndef __wince + +#if defined (__ARMEL__) + +#ifndef __LITTLE_ENDIAN + +#define __LITTLE_ENDIAN + +#endif /* _LITTLE_ENDIAN */ + +#elif defined (__ARMEB__) || CPU == SIMSPARCSOLARIS + +#ifndef __BIG_ENDIAN + +#define __BIG_ENDIAN + +#endif /* __BIG_ENDIAN */ + +#else + +#error Error, could not identify target endianness + +#endif /* endianness selector no WinCE OSes */ + +#else /* ndef __wince */ + +#define __LITTLE_ENDIAN + +#endif /* def __wince */ + + +/* OS mode selector */ +#if defined (__vxworks) && defined (__LITTLE_ENDIAN) + +#define IX_OSAL_VXWORKS_LE + +#elif defined (__vxworks) && defined (__BIG_ENDIAN) + +#define IX_OSAL_VXWORKS_BE + +#elif defined (__linux) && defined (__BIG_ENDIAN) + +#define IX_OSAL_LINUX_BE + +#elif defined (__linux) && defined (__LITTLE_ENDIAN) + +#define IX_OSAL_LINUX_LE + +#elif defined (BOOTLOADER_BLD) && defined (__LITTLE_ENDIAN) + +#define IX_OSAL_EBOOT_LE + +#elif defined (__wince) && defined (__LITTLE_ENDIAN) + +#define IX_OSAL_WINCE_LE + +#else + +#error Unknown OS/Endianess combination - only vxWorks BE LE, Linux BE LE, WinCE BE LE are supported + +#endif /* mode selector */ + + + +#endif /* IxOsalEndianess_H */ diff --git a/drivers/net/npe/include/IxOsalIoMem.h b/drivers/net/npe/include/IxOsalIoMem.h new file mode 100644 index 0000000000..ea6d64d000 --- /dev/null +++ b/drivers/net/npe/include/IxOsalIoMem.h @@ -0,0 +1,322 @@ +/* + * @file IxOsalIoMem.h + * @author Intel Corporation + * @date 25-08-2004 + * + * @brief description goes here + */ + +/** + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalIoMem_H +#define IxOsalIoMem_H + + +/* + * Decide OS and Endianess, such as IX_OSAL_VXWORKS_LE. + */ +#include "IxOsalEndianess.h" + +/** + * @defgroup IxOsalIoMem Osal IoMem module + * + * @brief I/O memory and endianess support. + * + * @{ + */ + +/* Low-level conversion macros - DO NOT USE UNLESS ABSOLUTELY NEEDED */ +#ifndef __wince + + +/* + * Private function to swap word + */ +#ifdef __XSCALE__ +static __inline__ UINT32 +ixOsalCoreWordSwap (UINT32 wordIn) +{ + /* + * Storage for the swapped word + */ + UINT32 wordOut; + + /* + * wordIn = A, B, C, D + */ + __asm__ (" eor r1, %1, %1, ror #16;" /* R1 = A^C, B^D, C^A, D^B */ + " bic r1, r1, #0x00ff0000;" /* R1 = A^C, 0 , C^A, D^B */ + " mov %0, %1, ror #8;" /* wordOut = D, A, B, C */ + " eor %0, %0, r1, lsr #8;" /* wordOut = D, C, B, A */ + : "=r" (wordOut): "r" (wordIn):"r1"); + + return wordOut; +} + +#define IX_OSAL_SWAP_LONG(wData) (ixOsalCoreWordSwap(wData)) +#else +#define IX_OSAL_SWAP_LONG(wData) ((wData >> 24) | (((wData >> 16) & 0xFF) << 8) | (((wData >> 8) & 0xFF) << 16) | ((wData & 0xFF) << 24)) +#endif + +#else /* ndef __wince */ +#define IX_OSAL_SWAP_LONG(wData) ((((UINT32)wData << 24) | ((UINT32)wData >> 24)) | (((wData << 8) & 0xff0000) | ((wData >> 8) & 0xff00))) +#endif /* ndef __wince */ + +#define IX_OSAL_SWAP_SHORT(sData) ((sData >> 8) | ((sData & 0xFF) << 8)) +#define IX_OSAL_SWAP_SHORT_ADDRESS(sAddr) ((sAddr) ^ 0x2) +#define IX_OSAL_SWAP_BYTE_ADDRESS(bAddr) ((bAddr) ^ 0x3) + +#define IX_OSAL_BE_XSTOBUSL(wData) (wData) +#define IX_OSAL_BE_XSTOBUSS(sData) (sData) +#define IX_OSAL_BE_XSTOBUSB(bData) (bData) +#define IX_OSAL_BE_BUSTOXSL(wData) (wData) +#define IX_OSAL_BE_BUSTOXSS(sData) (sData) +#define IX_OSAL_BE_BUSTOXSB(bData) (bData) + +#define IX_OSAL_LE_AC_XSTOBUSL(wAddr) (wAddr) +#define IX_OSAL_LE_AC_XSTOBUSS(sAddr) IX_OSAL_SWAP_SHORT_ADDRESS(sAddr) +#define IX_OSAL_LE_AC_XSTOBUSB(bAddr) IX_OSAL_SWAP_BYTE_ADDRESS(bAddr) +#define IX_OSAL_LE_AC_BUSTOXSL(wAddr) (wAddr) +#define IX_OSAL_LE_AC_BUSTOXSS(sAddr) IX_OSAL_SWAP_SHORT_ADDRESS(sAddr) +#define IX_OSAL_LE_AC_BUSTOXSB(bAddr) IX_OSAL_SWAP_BYTE_ADDRESS(bAddr) + +#define IX_OSAL_LE_DC_XSTOBUSL(wData) IX_OSAL_SWAP_LONG(wData) +#define IX_OSAL_LE_DC_XSTOBUSS(sData) IX_OSAL_SWAP_SHORT(sData) +#define IX_OSAL_LE_DC_XSTOBUSB(bData) (bData) +#define IX_OSAL_LE_DC_BUSTOXSL(wData) IX_OSAL_SWAP_LONG(wData) +#define IX_OSAL_LE_DC_BUSTOXSS(sData) IX_OSAL_SWAP_SHORT(sData) +#define IX_OSAL_LE_DC_BUSTOXSB(bData) (bData) + + +/* + * Decide SDRAM mapping, then implement read/write + */ +#include "IxOsalMemAccess.h" + + +/** + * @ingroup IxOsalIoMem + * @enum IxOsalMapEntryType + * @brief This is an emum for OSAL I/O mem map type. + */ +typedef enum +{ + IX_OSAL_STATIC_MAP = 0, /**<Set map entry type to static map */ + IX_OSAL_DYNAMIC_MAP /**<Set map entry type to dynamic map */ +} IxOsalMapEntryType; + + +/** + * @ingroup IxOsalIoMem + * @enum IxOsalMapEndianessType + * @brief This is an emum for OSAL I/O mem Endianess and Coherency mode. + */ +typedef enum +{ + IX_OSAL_BE = 0x1, /**<Set map endian mode to Big Endian */ + IX_OSAL_LE_AC = 0x2, /**<Set map endian mode to Little Endian, Address Coherent */ + IX_OSAL_LE_DC = 0x4, /**<Set map endian mode to Little Endian, Data Coherent */ + IX_OSAL_LE = 0x8 /**<Set map endian mode to Little Endian without specifying coherency mode */ +} IxOsalMapEndianessType; + + +/** + * @struct IxOsalMemoryMap + * @brief IxOsalMemoryMap structure + */ +typedef struct _IxOsalMemoryMap +{ + IxOsalMapEntryType type; /**< map type - IX_OSAL_STATIC_MAP or IX_OSAL_DYNAMIC_MAP */ + + UINT32 physicalAddress; /**< physical address of the memory mapped I/O zone */ + + UINT32 size; /**< size of the map */ + + UINT32 virtualAddress; /**< virtual address of the zone; must be predefined + in the global memory map for static maps and has + to be NULL for dynamic maps (populated on allocation) + */ + /* + * pointer to a map function called to map a dynamic map; + * will populate the virtualAddress field + */ + void (*mapFunction) (struct _IxOsalMemoryMap * map); /**< pointer to a map function called to map a dynamic map */ + + /* + * pointer to a map function called to unmap a dynamic map; + * will reset the virtualAddress field to NULL + */ + void (*unmapFunction) (struct _IxOsalMemoryMap * map); /**< pointer to a map function called to unmap a dynamic map */ + + /* + * reference count describing how many components share this map; + * actual allocation/deallocation for dynamic maps is done only + * between 0 <=> 1 transitions of the counter + */ + UINT32 refCount; /**< reference count describing how many components share this map */ + + /* + * memory endian type for the map; can be a combination of IX_OSAL_BE (Big + * Endian) and IX_OSAL_LE or IX_OSAL_LE_AC or IX_OSAL_LE_DC + * (Little Endian, Address Coherent or Data Coherent). Any combination is + * allowed provided it contains at most one LE flag - e.g. + * (IX_OSAL_BE), (IX_OSAL_LE_AC), (IX_OSAL_BE | IX_OSAL_LE_DC) are valid + * combinations while (IX_OSAL_BE | IX_OSAL_LE_DC | IX_OSAL_LE_AC) is not. + */ + IxOsalMapEndianessType mapEndianType; /**< memory endian type for the map */ + + char *name; /**< user-friendly name */ +} IxOsalMemoryMap; + + + + +/* Internal function to map a memory zone + * NOTE - This should not be called by the user. + * Use the macro IX_OSAL_MEM_MAP instead + */ +PUBLIC void *ixOsalIoMemMap (UINT32 requestedAddress, + UINT32 size, + IxOsalMapEndianessType requestedCoherency); + + +/* Internal function to unmap a memory zone mapped with ixOsalIoMemMap + * NOTE - This should not be called by the user. + * Use the macro IX_OSAL_MEM_UNMAP instead + */ +PUBLIC void ixOsalIoMemUnmap (UINT32 requestedAddress, UINT32 coherency); + + +/* Internal function to convert virtual address to physical address + * NOTE - This should not be called by the user. + * Use the macro IX_OSAL_MMAP_VIRT_TO_PHYS */ +PUBLIC UINT32 ixOsalIoMemVirtToPhys (UINT32 virtualAddress, UINT32 coherency); + + +/* Internal function to convert physical address to virtual address + * NOTE - This should not be called by the user. + * Use the macro IX_OSAL_MMAP_PHYS_TO_VIRT */ +PUBLIC UINT32 +ixOsalIoMemPhysToVirt (UINT32 physicalAddress, UINT32 coherency); + +/** + * @ingroup IxOsalIoMem + * + * @def IX_OSAL_MEM_MAP(physAddr, size) + * + * @brief Map an I/O mapped physical memory zone to virtual zone and return virtual + * pointer. + * @param physAddr - the physical address + * @param size - the size + * @return start address of the virtual memory zone. + * + * @note This function maps an I/O mapped physical memory zone of the given size + * into a virtual memory zone accessible by the caller and returns a cookie - + * the start address of the virtual memory zone. + * IX_OSAL_MMAP_PHYS_TO_VIRT should NOT therefore be used on the returned + * virtual address. + * The memory zone is to be unmapped using IX_OSAL_MEM_UNMAP once the caller has + * finished using this zone (e.g. on driver unload) using the cookie as + * parameter. + * The IX_OSAL_READ/WRITE_LONG/SHORT macros should be used to read and write + * the mapped memory, adding the necessary offsets to the address cookie. + */ +#define IX_OSAL_MEM_MAP(physAddr, size) \ + ixOsalIoMemMap((physAddr), (size), IX_OSAL_COMPONENT_MAPPING) + + +/** + * @ingroup IxOsalIoMem + * + * @def IX_OSAL_MEM_UNMAP(virtAddr) + * + * @brief Unmap a previously mapped I/O memory zone using virtual pointer obtained + * during the mapping operation. + * pointer. + * @param virtAddr - the virtual pointer to the zone to be unmapped. + * @return none + * + * @note This function unmaps a previously mapped I/O memory zone using + * the cookie obtained in the mapping operation. The memory zone in question + * becomes unavailable to the caller once unmapped and the cookie should be + * discarded. + * + * This function cannot fail if the given parameter is correct and does not + * return a value. + */ +#define IX_OSAL_MEM_UNMAP(virtAddr) \ + ixOsalIoMemUnmap ((virtAddr), IX_OSAL_COMPONENT_MAPPING) + +/** + * @ingroup IxOsalIoMem + * + * @def IX_OSAL_MMAP_VIRT_TO_PHYS(virtAddr) + * + * @brief This function Converts a virtual address into a physical + * address, including the dynamically mapped memory. + * + * @param virtAddr - virtual address to convert + * Return value: corresponding physical address, or NULL + */ +#define IX_OSAL_MMAP_VIRT_TO_PHYS(virtAddr) \ + ixOsalIoMemVirtToPhys(virtAddr, IX_OSAL_COMPONENT_MAPPING) + + +/** + * @ingroup IxOsalIoMem + * + * @def IX_OSAL_MMAP_PHYS_TO_VIRT(physAddr) + * + * @brief This function Converts a virtual address into a physical + * address, including the dynamically mapped memory. + * + * @param physAddr - physical address to convert + * Return value: corresponding virtual address, or NULL + * + */ +#define IX_OSAL_MMAP_PHYS_TO_VIRT(physAddr) \ + ixOsalIoMemPhysToVirt(physAddr, IX_OSAL_COMPONENT_MAPPING) + +/** + * @} IxOsalIoMem + */ + +#endif /* IxOsalIoMem_H */ diff --git a/drivers/net/npe/include/IxOsalMemAccess.h b/drivers/net/npe/include/IxOsalMemAccess.h new file mode 100644 index 0000000000..9e7fb87be5 --- /dev/null +++ b/drivers/net/npe/include/IxOsalMemAccess.h @@ -0,0 +1,494 @@ +/** + * @file IxOsalMemAccess.h + * + * @brief Header file for memory access + * + * @par + * @version $Revision: 1.0 $ + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalMemAccess_H +#define IxOsalMemAccess_H + + +/* Global BE switch + * + * Should be set only in BE mode and only if the component uses I/O memory. + */ + +#if defined (__BIG_ENDIAN) + +#define IX_OSAL_BE_MAPPING + +#endif /* Global switch */ + + +/* By default only static memory maps in use; + define IX_OSAL_DYNAMIC_MEMORY_MAP per component if dynamic maps are + used instead in that component */ +#define IX_OSAL_STATIC_MEMORY_MAP + + +/* + * SDRAM coherency mode + * Must be defined to BE, LE_DATA_COHERENT or LE_ADDRESS_COHERENT. + * The mode changes depending on OS + */ +#if defined (IX_OSAL_LINUX_BE) || defined (IX_OSAL_VXWORKS_BE) + +#define IX_SDRAM_BE + +#elif defined (IX_OSAL_VXWORKS_LE) + +#define IX_SDRAM_LE_DATA_COHERENT + +#elif defined (IX_OSAL_LINUX_LE) + +#define IX_SDRAM_LE_DATA_COHERENT + +#elif defined (IX_OSAL_WINCE_LE) + +#define IX_SDRAM_LE_DATA_COHERENT + +#elif defined (IX_OSAL_EBOOT_LE) + +#define IX_SDRAM_LE_ADDRESS_COHERENT + +#endif + + + + +/************************************** + * Retrieve current component mapping * + **************************************/ + +/* + * Only use customized mapping for LE. + * + */ +#if defined (IX_OSAL_VXWORKS_LE) || defined (IX_OSAL_LINUX_LE) || defined (IX_OSAL_WINCE_LE) || defined (IX_OSAL_EBOOT_LE) + +#include "IxOsalOsIxp400CustomizedMapping.h" + +#endif + + +/******************************************************************* + * Turn off IX_STATIC_MEMORY map for components using dynamic maps * + *******************************************************************/ +#ifdef IX_OSAL_DYNAMIC_MEMORY_MAP + +#undef IX_OSAL_STATIC_MEMORY_MAP + +#endif + + +/************************************************************ + * Turn off BE access for components using LE or no mapping * + ************************************************************/ + +#if ( defined (IX_OSAL_LE_AC_MAPPING) || defined (IX_OSAL_LE_DC_MAPPING) || defined (IX_OSAL_NO_MAPPING) ) + +#undef IX_OSAL_BE_MAPPING + +#endif + + +/***************** + * Safety checks * + *****************/ + +/* Default to no_mapping */ +#if !defined (IX_OSAL_BE_MAPPING) && !defined (IX_OSAL_LE_AC_MAPPING) && !defined (IX_OSAL_LE_DC_MAPPING) && !defined (IX_OSAL_NO_MAPPING) + +#define IX_OSAL_NO_MAPPING + +#endif /* check at least one mapping */ + +/* No more than one mapping can be defined for a component */ +#if (defined (IX_OSAL_BE_MAPPING) && defined (IX_OSAL_LE_AC_MAPPING)) \ + ||(defined (IX_OSAL_BE_MAPPING) && defined (IX_OSAL_LE_DC_MAPPING)) \ + ||(defined (IX_OSAL_BE_MAPPING) && defined (IX_OSAL_NO_MAPPING)) \ + ||(defined (IX_OSAL_LE_DC_MAPPING) && defined (IX_OSAL_NO_MAPPING)) \ + ||(defined (IX_OSAL_LE_DC_MAPPING) && defined (IX_OSAL_LE_AC_MAPPING)) \ + ||(defined (IX_OSAL_LE_AC_MAPPING) && defined (IX_OSAL_NO_MAPPING)) + + +#ifdef IX_OSAL_BE_MAPPING +#warning IX_OSAL_BE_MAPPING is defined +#endif + +#ifdef IX_OSAL_LE_AC_MAPPING +#warning IX_OSAL_LE_AC_MAPPING is defined +#endif + +#ifdef IX_OSAL_LE_DC_MAPPING +#warning IX_OSAL_LE_DC_MAPPING is defined +#endif + +#ifdef IX_OSAL_NO_MAPPING +#warning IX_OSAL_NO_MAPPING is defined +#endif + +#error More than one I/O mapping is defined, please check your component mapping + +#endif /* check at most one mapping */ + + +/* Now set IX_OSAL_COMPONENT_MAPPING */ + +#ifdef IX_OSAL_BE_MAPPING +#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_BE +#endif + +#ifdef IX_OSAL_LE_AC_MAPPING +#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_LE_AC +#endif + +#ifdef IX_OSAL_LE_DC_MAPPING +#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_LE_DC +#endif + +#ifdef IX_OSAL_NO_MAPPING +#define IX_OSAL_COMPONENT_MAPPING IX_OSAL_LE +#endif + + +/* SDRAM coherency should be defined */ +#if !defined (IX_SDRAM_BE) && !defined (IX_SDRAM_LE_DATA_COHERENT) && !defined (IX_SDRAM_LE_ADDRESS_COHERENT) + +#error SDRAM coherency must be defined + +#endif /* SDRAM coherency must be defined */ + +/* SDRAM coherency cannot be defined in several ways */ +#if (defined (IX_SDRAM_BE) && (defined (IX_SDRAM_LE_DATA_COHERENT) || defined (IX_SDRAM_LE_ADDRESS_COHERENT))) \ + || (defined (IX_SDRAM_LE_DATA_COHERENT) && (defined (IX_SDRAM_BE) || defined (IX_SDRAM_LE_ADDRESS_COHERENT))) \ + || (defined (IX_SDRAM_LE_ADDRESS_COHERENT) && (defined (IX_SDRAM_BE) || defined (IX_SDRAM_LE_DATA_COHERENT))) + +#error SDRAM coherency cannot be defined in more than one way + +#endif /* SDRAM coherency must be defined exactly once */ + + +/********************* + * Read/write macros * + *********************/ + +/* WARNING - except for addition of special cookie read/write macros (see below) + these macros are NOT user serviceable. Please do not modify */ + +#define IX_OSAL_READ_LONG_RAW(wAddr) (*(wAddr)) +#define IX_OSAL_READ_SHORT_RAW(sAddr) (*(sAddr)) +#define IX_OSAL_READ_BYTE_RAW(bAddr) (*(bAddr)) +#define IX_OSAL_WRITE_LONG_RAW(wAddr, wData) (*(wAddr) = (wData)) +#define IX_OSAL_WRITE_SHORT_RAW(sAddr,sData) (*(sAddr) = (sData)) +#define IX_OSAL_WRITE_BYTE_RAW(bAddr, bData) (*(bAddr) = (bData)) + +#ifdef __linux + +/* Linux - specific cookie reads/writes. + Redefine per OS if dynamic memory maps are used + and I/O memory is accessed via functions instead of raw pointer access. */ + +#define IX_OSAL_READ_LONG_COOKIE(wCookie) (readl((UINT32) (wCookie) )) +#define IX_OSAL_READ_SHORT_COOKIE(sCookie) (readw((UINT32) (sCookie) )) +#define IX_OSAL_READ_BYTE_COOKIE(bCookie) (readb((UINT32) (bCookie) )) +#define IX_OSAL_WRITE_LONG_COOKIE(wCookie, wData) (writel(wData, (UINT32) (wCookie) )) +#define IX_OSAL_WRITE_SHORT_COOKIE(sCookie, sData) (writew(sData, (UINT32) (sCookie) )) +#define IX_OSAL_WRITE_BYTE_COOKIE(bCookie, bData) (writeb(bData, (UINT32) (bCookie) )) + +#endif /* linux */ + +#ifdef __wince + +/* WinCE - specific cookie reads/writes. */ + +static __inline__ UINT32 +ixOsalWinCEReadLCookie (volatile UINT32 * lCookie) +{ + return *lCookie; +} + +static __inline__ UINT16 +ixOsalWinCEReadWCookie (volatile UINT16 * wCookie) +{ +#if 0 + UINT32 auxVal = *((volatile UINT32 *) wCookie); + if ((unsigned) wCookie & 3) + return (UINT16) (auxVal >> 16); + else + return (UINT16) (auxVal & 0xffff); +#else + return *wCookie; +#endif +} + +static __inline__ UINT8 +ixOsalWinCEReadBCookie (volatile UINT8 * bCookie) +{ +#if 0 + UINT32 auxVal = *((volatile UINT32 *) bCookie); + return (UINT8) ((auxVal >> (3 - (((unsigned) bCookie & 3) << 3)) & 0xff)); +#else + return *bCookie; +#endif +} + +static __inline__ void +ixOsalWinCEWriteLCookie (volatile UINT32 * lCookie, UINT32 lVal) +{ + *lCookie = lVal; +} + +static __inline__ void +ixOsalWinCEWriteWCookie (volatile UINT16 * wCookie, UINT16 wVal) +{ +#if 0 + volatile UINT32 *auxCookie = + (volatile UINT32 *) ((unsigned) wCookie & ~3); + if ((unsigned) wCookie & 3) + { + *auxCookie &= 0xffff; + *auxCookie |= (UINT32) wVal << 16; + } + else + { + *auxCookie &= ~0xffff; + *auxCookie |= (UINT32) wVal & 0xffff; + } +#else + *wCookie = wVal; +#endif +} + +static __inline__ void +ixOsalWinCEWriteBCookie (volatile UINT8 * bCookie, UINT8 bVal) +{ +#if 0 + volatile UINT32 *auxCookie = + (volatile UINT32 *) ((unsigned) bCookie & ~3); + *auxCookie &= 0xff << (3 - (((unsigned) bCookie & 3) << 3)); + *auxCookie |= (UINT32) bVal << (3 - (((unsigned) bCookie & 3) << 3)); +#else + *bCookie = bVal; +#endif +} + + +#define IX_OSAL_READ_LONG_COOKIE(wCookie) (ixOsalWinCEReadLCookie(wCookie)) +#define IX_OSAL_READ_SHORT_COOKIE(sCookie) (ixOsalWinCEReadWCookie(sCookie)) +#define IX_OSAL_READ_BYTE_COOKIE(bCookie) (ixOsalWinCEReadBCookie(bCookie)) +#define IX_OSAL_WRITE_LONG_COOKIE(wCookie, wData) (ixOsalWinCEWriteLCookie(wCookie, wData)) +#define IX_OSAL_WRITE_SHORT_COOKIE(sCookie, sData) (ixOsalWinCEWriteWCookie(sCookie, sData)) +#define IX_OSAL_WRITE_BYTE_COOKIE(bCookie, bData) (ixOsalWinCEWriteBCookie(bCookie, bData)) + +#endif /* wince */ + +#if defined (__vxworks) || (defined (__linux) && defined (IX_OSAL_STATIC_MEMORY_MAP)) || \ + (defined (__wince) && defined (IX_OSAL_STATIC_MEMORY_MAP)) + +#define IX_OSAL_READ_LONG_IO(wAddr) IX_OSAL_READ_LONG_RAW(wAddr) +#define IX_OSAL_READ_SHORT_IO(sAddr) IX_OSAL_READ_SHORT_RAW(sAddr) +#define IX_OSAL_READ_BYTE_IO(bAddr) IX_OSAL_READ_BYTE_RAW(bAddr) +#define IX_OSAL_WRITE_LONG_IO(wAddr, wData) IX_OSAL_WRITE_LONG_RAW(wAddr, wData) +#define IX_OSAL_WRITE_SHORT_IO(sAddr, sData) IX_OSAL_WRITE_SHORT_RAW(sAddr, sData) +#define IX_OSAL_WRITE_BYTE_IO(bAddr, bData) IX_OSAL_WRITE_BYTE_RAW(bAddr, bData) + +#elif (defined (__linux) && !defined (IX_OSAL_STATIC_MEMORY_MAP)) || \ + (defined (__wince) && !defined (IX_OSAL_STATIC_MEMORY_MAP)) + +#ifndef __wince +#include <asm/io.h> +#endif /* ndef __wince */ + +#define IX_OSAL_READ_LONG_IO(wAddr) IX_OSAL_READ_LONG_COOKIE(wAddr) +#define IX_OSAL_READ_SHORT_IO(sAddr) IX_OSAL_READ_SHORT_COOKIE(sAddr) +#define IX_OSAL_READ_BYTE_IO(bAddr) IX_OSAL_READ_BYTE_COOKIE(bAddr) +#define IX_OSAL_WRITE_LONG_IO(wAddr, wData) IX_OSAL_WRITE_LONG_COOKIE(wAddr, wData) +#define IX_OSAL_WRITE_SHORT_IO(sAddr, sData) IX_OSAL_WRITE_SHORT_COOKIE(sAddr, sData) +#define IX_OSAL_WRITE_BYTE_IO(bAddr, bData) IX_OSAL_WRITE_BYTE_COOKIE(bAddr, bData) + +#endif + +/* Define BE macros */ +#define IX_OSAL_READ_LONG_BE(wAddr) IX_OSAL_BE_BUSTOXSL(IX_OSAL_READ_LONG_IO((volatile UINT32 *) (wAddr) )) +#define IX_OSAL_READ_SHORT_BE(sAddr) IX_OSAL_BE_BUSTOXSS(IX_OSAL_READ_SHORT_IO((volatile UINT16 *) (sAddr) )) +#define IX_OSAL_READ_BYTE_BE(bAddr) IX_OSAL_BE_BUSTOXSB(IX_OSAL_READ_BYTE_IO((volatile UINT8 *) (bAddr) )) +#define IX_OSAL_WRITE_LONG_BE(wAddr, wData) IX_OSAL_WRITE_LONG_IO((volatile UINT32 *) (wAddr), IX_OSAL_BE_XSTOBUSL((UINT32) (wData) )) +#define IX_OSAL_WRITE_SHORT_BE(sAddr, sData) IX_OSAL_WRITE_SHORT_IO((volatile UINT16 *) (sAddr), IX_OSAL_BE_XSTOBUSS((UINT16) (sData) )) +#define IX_OSAL_WRITE_BYTE_BE(bAddr, bData) IX_OSAL_WRITE_BYTE_IO((volatile UINT8 *) (bAddr), IX_OSAL_BE_XSTOBUSB((UINT8) (bData) )) + +/* Define LE AC macros */ +#define IX_OSAL_READ_LONG_LE_AC(wAddr) IX_OSAL_READ_LONG_IO((volatile UINT32 *) IX_OSAL_LE_AC_BUSTOXSL((UINT32) (wAddr) )) +#define IX_OSAL_READ_SHORT_LE_AC(sAddr) IX_OSAL_READ_SHORT_IO((volatile UINT16 *) IX_OSAL_LE_AC_BUSTOXSS((UINT32) (sAddr) )) +#define IX_OSAL_READ_BYTE_LE_AC(bAddr) IX_OSAL_READ_BYTE_IO((volatile UINT8 *) IX_OSAL_LE_AC_BUSTOXSB((UINT32) (bAddr) )) +#define IX_OSAL_WRITE_LONG_LE_AC(wAddr, wData) IX_OSAL_WRITE_LONG_IO((volatile UINT32 *) IX_OSAL_LE_AC_XSTOBUSL((UINT32) (wAddr) ), (UINT32) (wData)) +#define IX_OSAL_WRITE_SHORT_LE_AC(sAddr, sData) IX_OSAL_WRITE_SHORT_IO((volatile UINT16 *) IX_OSAL_LE_AC_XSTOBUSS((UINT32) (sAddr) ), (UINT16) (sData)) +#define IX_OSAL_WRITE_BYTE_LE_AC(bAddr, bData) IX_OSAL_WRITE_BYTE_IO((volatile UINT8 *) IX_OSAL_LE_AC_XSTOBUSB((UINT32) (bAddr) ), (UINT8) (bData)) + + +/* Inline functions are required here to avoid reading the same I/O location 2 or 4 times for the byte swap */ +static __inline__ UINT32 +ixOsalDataCoherentLongReadSwap (volatile UINT32 * wAddr) +{ + UINT32 wData = IX_OSAL_READ_LONG_IO (wAddr); + return IX_OSAL_LE_DC_BUSTOXSL (wData); +} + +static __inline__ UINT16 +ixOsalDataCoherentShortReadSwap (volatile UINT16 * sAddr) +{ + UINT16 sData = IX_OSAL_READ_SHORT_IO (sAddr); + return IX_OSAL_LE_DC_BUSTOXSS (sData); +} + +static __inline__ void +ixOsalDataCoherentLongWriteSwap (volatile UINT32 * wAddr, UINT32 wData) +{ + wData = IX_OSAL_LE_DC_XSTOBUSL (wData); + IX_OSAL_WRITE_LONG_IO (wAddr, wData); +} + +static __inline__ void +ixOsalDataCoherentShortWriteSwap (volatile UINT16 * sAddr, UINT16 sData) +{ + sData = IX_OSAL_LE_DC_XSTOBUSS (sData); + IX_OSAL_WRITE_SHORT_IO (sAddr, sData); +} + +/* Define LE DC macros */ + +#define IX_OSAL_READ_LONG_LE_DC(wAddr) ixOsalDataCoherentLongReadSwap((volatile UINT32 *) (wAddr) ) +#define IX_OSAL_READ_SHORT_LE_DC(sAddr) ixOsalDataCoherentShortReadSwap((volatile UINT16 *) (sAddr) ) +#define IX_OSAL_READ_BYTE_LE_DC(bAddr) IX_OSAL_LE_DC_BUSTOXSB(IX_OSAL_READ_BYTE_IO((volatile UINT8 *) (bAddr) )) +#define IX_OSAL_WRITE_LONG_LE_DC(wAddr, wData) ixOsalDataCoherentLongWriteSwap((volatile UINT32 *) (wAddr), (UINT32) (wData)) +#define IX_OSAL_WRITE_SHORT_LE_DC(sAddr, sData) ixOsalDataCoherentShortWriteSwap((volatile UINT16 *) (sAddr), (UINT16) (sData)) +#define IX_OSAL_WRITE_BYTE_LE_DC(bAddr, bData) IX_OSAL_WRITE_BYTE_IO((volatile UINT8 *) (bAddr), IX_OSAL_LE_DC_XSTOBUSB((UINT8) (bData))) + +#if defined (IX_OSAL_BE_MAPPING) + +#define IX_OSAL_READ_LONG(wAddr) IX_OSAL_READ_LONG_BE(wAddr) +#define IX_OSAL_READ_SHORT(sAddr) IX_OSAL_READ_SHORT_BE(sAddr) +#define IX_OSAL_READ_BYTE(bAddr) IX_OSAL_READ_BYTE_BE(bAddr) +#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_BE(wAddr, wData) +#define IX_OSAL_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_BE(sAddr, sData) +#define IX_OSAL_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_BE(bAddr, bData) + +#elif defined (IX_OSAL_LE_AC_MAPPING) + +#define IX_OSAL_READ_LONG(wAddr) IX_OSAL_READ_LONG_LE_AC(wAddr) +#define IX_OSAL_READ_SHORT(sAddr) IX_OSAL_READ_SHORT_LE_AC(sAddr) +#define IX_OSAL_READ_BYTE(bAddr) IX_OSAL_READ_BYTE_LE_AC(bAddr) +#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_LE_AC(wAddr, wData) +#define IX_OSAL_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_LE_AC(sAddr, sData) +#define IX_OSAL_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_LE_AC(bAddr, bData) + +#elif defined (IX_OSAL_LE_DC_MAPPING) + +#define IX_OSAL_READ_LONG(wAddr) IX_OSAL_READ_LONG_LE_DC(wAddr) +#define IX_OSAL_READ_SHORT(sAddr) IX_OSAL_READ_SHORT_LE_DC(sAddr) +#define IX_OSAL_READ_BYTE(bAddr) IX_OSAL_READ_BYTE_LE_DC(bAddr) +#define IX_OSAL_WRITE_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_LE_DC(wAddr, wData) +#define IX_OSAL_WRITE_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_LE_DC(sAddr, sData) +#define IX_OSAL_WRITE_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_LE_DC(bAddr, bData) + +#endif /* End of BE and LE coherency mode switch */ + + +/* Reads/writes to and from memory shared with NPEs - depends on the SDRAM coherency */ + +#if defined (IX_SDRAM_BE) + +#define IX_OSAL_READ_BE_SHARED_LONG(wAddr) IX_OSAL_READ_LONG_RAW(wAddr) +#define IX_OSAL_READ_BE_SHARED_SHORT(sAddr) IX_OSAL_READ_SHORT_RAW(sAddr) +#define IX_OSAL_READ_BE_SHARED_BYTE(bAddr) IX_OSAL_READ_BYTE_RAW(bAddr) + +#define IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_RAW(wAddr, wData) +#define IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_RAW(sAddr, sData) +#define IX_OSAL_WRITE_BE_SHARED_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_RAW(bAddr, bData) + +#define IX_OSAL_SWAP_BE_SHARED_LONG(wData) (wData) +#define IX_OSAL_SWAP_BE_SHARED_SHORT(sData) (sData) +#define IX_OSAL_SWAP_BE_SHARED_BYTE(bData) (bData) + +#elif defined (IX_SDRAM_LE_ADDRESS_COHERENT) + +#define IX_OSAL_READ_BE_SHARED_LONG(wAddr) IX_OSAL_READ_LONG_RAW(wAddr) +#define IX_OSAL_READ_BE_SHARED_SHORT(sAddr) IX_OSAL_READ_SHORT_RAW(IX_OSAL_SWAP_SHORT_ADDRESS(sAddr)) +#define IX_OSAL_READ_BE_SHARED_BYTE(bAddr) IX_OSAL_READ_BYTE_RAW(IX_OSAL_SWAP_BYTE_ADDRESS(bAddr)) + +#define IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_RAW(wAddr, wData) +#define IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_RAW(IX_OSAL_SWAP_SHORT_ADDRESS(sAddr), sData) +#define IX_OSAL_WRITE_BE_SHARED_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_RAW(IX_OSAL_SWAP_BYTE_ADDRESS(bAddr), bData) + +#define IX_OSAL_SWAP_BE_SHARED_LONG(wData) (wData) +#define IX_OSAL_SWAP_BE_SHARED_SHORT(sData) (sData) +#define IX_OSAL_SWAP_BE_SHARED_BYTE(bData) (bData) + +#elif defined (IX_SDRAM_LE_DATA_COHERENT) + +#define IX_OSAL_READ_BE_SHARED_LONG(wAddr) IX_OSAL_SWAP_LONG(IX_OSAL_READ_LONG_RAW(wAddr)) +#define IX_OSAL_READ_BE_SHARED_SHORT(sAddr) IX_OSAL_SWAP_SHORT(IX_OSAL_READ_SHORT_RAW(sAddr)) +#define IX_OSAL_READ_BE_SHARED_BYTE(bAddr) IX_OSAL_READ_BYTE_RAW(bAddr) + +#define IX_OSAL_WRITE_BE_SHARED_LONG(wAddr, wData) IX_OSAL_WRITE_LONG_RAW(wAddr, IX_OSAL_SWAP_LONG(wData)) +#define IX_OSAL_WRITE_BE_SHARED_SHORT(sAddr, sData) IX_OSAL_WRITE_SHORT_RAW(sAddr, IX_OSAL_SWAP_SHORT(sData)) +#define IX_OSAL_WRITE_BE_SHARED_BYTE(bAddr, bData) IX_OSAL_WRITE_BYTE_RAW(bAddr, bData) + +#define IX_OSAL_SWAP_BE_SHARED_LONG(wData) IX_OSAL_SWAP_LONG(wData) +#define IX_OSAL_SWAP_BE_SHARED_SHORT(sData) IX_OSAL_SWAP_SHORT(sData) + +#endif + + +#define IX_OSAL_COPY_BE_SHARED_LONG_ARRAY(wDestAddr, wSrcAddr, wCount) \ + { \ + UINT32 i; \ + \ + for ( i = 0 ; i < wCount ; i++ ) \ + { \ + * (((UINT32 *) wDestAddr) + i) = IX_OSAL_READ_BE_SHARED_LONG(((UINT32 *) wSrcAddr) + i); \ + }; \ + }; + +#endif /* IxOsalMemAccess_H */ diff --git a/drivers/net/npe/include/IxOsalOem.h b/drivers/net/npe/include/IxOsalOem.h new file mode 100644 index 0000000000..f89402620c --- /dev/null +++ b/drivers/net/npe/include/IxOsalOem.h @@ -0,0 +1,97 @@ +/** + * @file IxOsalIxpOem.h + * + * @brief this file contains platform-specific defines. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalOem_H +#define IxOsalOem_H + +#include "IxOsalTypes.h" + +/* OS-specific header for Platform package */ +#include "IxOsalOsIxp400.h" + +/* + * Platform Name + */ +#define IX_OSAL_PLATFORM_NAME ixp400 + +/* + * Cache line size + */ +#define IX_OSAL_CACHE_LINE_SIZE (32) + + +/* Platform-specific fastmutex implementation */ +PUBLIC IX_STATUS ixOsalOemFastMutexTryLock (IxOsalFastMutex * mutex); + +/* Platform-specific init (MemMap) */ +PUBLIC IX_STATUS +ixOsalOemInit (void); + +/* Platform-specific unload (MemMap) */ +PUBLIC void +ixOsalOemUnload (void); + +/* Default implementations */ + +PUBLIC UINT32 +ixOsalIxp400SharedTimestampGet (void); + + +UINT32 +ixOsalIxp400SharedTimestampRateGet (void); + +UINT32 +ixOsalIxp400SharedSysClockRateGet (void); + +void +ixOsalIxp400SharedTimeGet (IxOsalTimeval * tv); + + +INT32 +ixOsalIxp400SharedLog (UINT32 level, UINT32 device, char *format, + int arg1, int arg2, int arg3, int arg4, + int arg5, int arg6); + +#endif /* IxOsal_Oem_H */ diff --git a/drivers/net/npe/include/IxOsalOs.h b/drivers/net/npe/include/IxOsalOs.h new file mode 100644 index 0000000000..6c66613415 --- /dev/null +++ b/drivers/net/npe/include/IxOsalOs.h @@ -0,0 +1,30 @@ +#ifndef IxOsalOs_H +#define IxOsalOs_H + +#ifndef IX_OSAL_CACHED +#error "Uncached memory not supported in linux environment" +#endif + +static inline unsigned long __v2p(unsigned long v) +{ + if (v < 0x40000000) + return (v & 0xfffffff); + else + return v; +} + +#define IX_OSAL_OS_MMU_VIRT_TO_PHYS(addr) __v2p((u32)addr) +#define IX_OSAL_OS_MMU_PHYS_TO_VIRT(addr) (addr) + +/* + * Data cache not enabled (hopefully) + */ +#define IX_OSAL_OS_CACHE_INVALIDATE(addr, size) +#define IX_OSAL_OS_CACHE_FLUSH(addr, size) +#define HAL_DCACHE_INVALIDATE(addr, size) +#define HAL_DCACHE_FLUSH(addr, size) + +#define __ixp42X /* sr: U-Boot needs this define */ + +#endif /* IxOsalOs_H */ + diff --git a/drivers/net/npe/include/IxOsalOsAssert.h b/drivers/net/npe/include/IxOsalOsAssert.h new file mode 100644 index 0000000000..e4c3e1f614 --- /dev/null +++ b/drivers/net/npe/include/IxOsalOsAssert.h @@ -0,0 +1,10 @@ +#ifndef IxOsalOsAssert_H +#define IxOsalOsAssert_H + +#define IX_OSAL_OS_ASSERT(c) if(!(c)) \ + { \ + ixOsalLog (IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDOUT, "Assertion failure \n", 0, 0, 0, 0, 0, 0);\ + while(1); \ + } + +#endif /* IxOsalOsAssert_H */ diff --git a/drivers/net/npe/include/IxOsalOsBufferMgt.h b/drivers/net/npe/include/IxOsalOsBufferMgt.h new file mode 100644 index 0000000000..8e46586ea0 --- /dev/null +++ b/drivers/net/npe/include/IxOsalOsBufferMgt.h @@ -0,0 +1,96 @@ +/** + * @file IxOsalOsBufferMgt.h + * + * @brief vxworks-specific buffer management module definitions. + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#ifndef IX_OSAL_OS_BUFFER_MGT_H +#define IX_OSAL_OS_BUFFER_MGT_H + +/* + * use the defaul bufferMgt provided by OSAL framework. + */ +#define IX_OSAL_USE_DEFAULT_BUFFER_MGT + +#include "IxOsalBufferMgtDefault.h" + +#if 0 /* FIXME */ +/* Define os-specific buffer macros for subfields */ +#define IX_OSAL_OSBUF_MDATA(osBufPtr) IX_OSAL_MBUF_MDATA(osBufPtr) + ( ((M_BLK *) osBufPtr)->m_data ) + +#define IX_OSAL_OSBUF_MLEN(osBufPtr) \ + ( ((M_BLK *) osBufPtr)->m_len ) + +#define IX_OSAL_OSBUF_PKT_LEN(osBufPtr) \ + ( ((M_BLK *) osBufPtr)->m_pkthdr.len ) + +#define IX_OSAL_OS_CONVERT_OSBUF_TO_IXPBUF( osBufPtr, ixpBufPtr) \ + { \ + IX_OSAL_MBUF_OSBUF_PTR( (IX_OSAL_MBUF *) ixpBufPtr) = (void *) osBufPtr; \ + IX_OSAL_MBUF_MDATA((IX_OSAL_MBUF *) ixpBufPtr) = IX_OSAL_OSBUF_MDATA(osBufPtr); \ + IX_OSAL_MBUF_PKT_LEN((IX_OSAL_MBUF *) ixpBufPtr) = IX_OSAL_OSBUF_PKT_LEN(osBufPtr); \ + IX_OSAL_MBUF_MLEN((IX_OSAL_MBUF *) ixpBufPtr) = IX_OSAL_OSBUF_MLEN(osBufPtr); \ + } + +#define IX_OSAL_OS_CONVERT_IXPBUF_TO_OSBUF( ixpBufPtr, osBufPtr) \ + { \ + if (ixpBufPtr == NULL) \ + { /* Do nothing */ } \ + else \ + { \ + (M_BLK *) osBufPtr = (M_BLK *) IX_OSAL_MBUF_OSBUF_PTR((IX_OSAL_MBUF *) ixpBufPtr); \ + if (osBufPtr == NULL) \ + { /* Do nothing */ } \ + else \ + { \ + IX_OSAL_OSBUF_MLEN(osBufPtr) =IX_OSAL_MBUF_MLEN((IX_OSAL_MBUF *) ixpBufPtr); \ + IX_OSAL_OSBUF_PKT_LEN(osBufPtr) =IX_OSAL_MBUF_PKT_LEN((IX_OSAL_MBUF *) ixpBufPtr); \ + } \ + } \ + } + +#endif /* FIXME */ + +#endif /* #define IX_OSAL_OS_BUFFER_MGT_H */ diff --git a/drivers/net/npe/include/IxOsalOsIxp400.h b/drivers/net/npe/include/IxOsalOsIxp400.h new file mode 100644 index 0000000000..44a94fb30f --- /dev/null +++ b/drivers/net/npe/include/IxOsalOsIxp400.h @@ -0,0 +1,316 @@ +/** + * @file IxOsalOsIxp400.h + * + * @brief OS and platform specific definitions + * + * Design Notes: + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalOsIxp400_H +#define IxOsalOsIxp400_H + +#define BIT(x) (1<<(x)) + +#define IXP425_EthA_BASE 0xc8009000 +#define IXP425_EthB_BASE 0xc800a000 + +#define IXP425_PSMA_BASE 0xc8006000 +#define IXP425_PSMB_BASE 0xc8007000 +#define IXP425_PSMC_BASE 0xc8008000 + +#define IXP425_PERIPHERAL_BASE 0xc8000000 + +#define IXP425_QMGR_BASE 0x60000000 +#define IXP425_OSTS 0xC8005000 + +#define IXP425_INT_LVL_NPEA 0 +#define IXP425_INT_LVL_NPEB 1 +#define IXP425_INT_LVL_NPEC 2 + +#define IXP425_INT_LVL_QM1 3 +#define IXP425_INT_LVL_QM2 4 + +#define IXP425_EXPANSION_BUS_BASE1 0x50000000 +#define IXP425_EXPANSION_BUS_BASE2 0x50000000 +#define IXP425_EXPANSION_BUS_CS1_BASE 0x51000000 + +#define IXP425_EXP_CONFIG_BASE 0xC4000000 + +/* physical addresses to be used when requesting memory with IX_OSAL_MEM_MAP */ +#define IX_OSAL_IXP400_INTC_PHYS_BASE IXP425_INTC_BASE +#define IX_OSAL_IXP400_GPIO_PHYS_BASE IXP425_GPIO_BASE +#define IX_OSAL_IXP400_UART1_PHYS_BASE IXP425_UART1_BASE +#define IX_OSAL_IXP400_UART2_PHYS_BASE IXP425_UART2_BASE +#define IX_OSAL_IXP400_ETHA_PHYS_BASE IXP425_EthA_BASE +#define IX_OSAL_IXP400_ETHB_PHYS_BASE IXP425_EthB_BASE +#define IX_OSAL_IXP400_NPEA_PHYS_BASE IXP425_NPEA_BASE +#define IX_OSAL_IXP400_NPEB_PHYS_BASE IXP425_NPEB_BASE +#define IX_OSAL_IXP400_NPEC_PHYS_BASE IXP425_NPEC_BASE +#define IX_OSAL_IXP400_PERIPHERAL_PHYS_BASE IXP425_PERIPHERAL_BASE +#define IX_OSAL_IXP400_QMGR_PHYS_BASE IXP425_QMGR_BASE +#define IX_OSAL_IXP400_OSTS_PHYS_BASE IXP425_TIMER_BASE +#define IX_OSAL_IXP400_USB_PHYS_BASE IXP425_USB_BASE +#define IX_OSAL_IXP400_EXP_CFG_PHYS_BASE IXP425_EXP_CFG_BASE +#define IX_OSAL_IXP400_EXP_BUS_PHYS_BASE IXP425_EXP_BUS_BASE2 +#define IX_OSAL_IXP400_EXP_BUS_BOOT_PHYS_BASE IXP425_EXP_BUS_BASE1 +#define IX_OSAL_IXP400_EXP_BUS_CS0_PHYS_BASE IXP425_EXP_BUS_CS0_BASE +#define IX_OSAL_IXP400_EXP_BUS_CS1_PHYS_BASE IXP425_EXP_BUS_CS1_BASE +#define IX_OSAL_IXP400_EXP_BUS_CS4_PHYS_BASE IXP425_EXP_BUS_CS4_BASE +#define IX_OSAL_IXP400_EXP_BUS_REGS_PHYS_BASE IXP425_EXP_CFG_BASE +#define IX_OSAL_IXP400_PCI_CFG_PHYS_BASE IXP425_PCI_CFG_BASE + +/* map sizes to be used when requesting memory with IX_OSAL_MEM_MAP */ +#define IX_OSAL_IXP400_QMGR_MAP_SIZE (0x4000) /**< Queue Manager map size */ +#define IX_OSAL_IXP400_PERIPHERAL_MAP_SIZE (0xC000) /**< Peripheral space map size */ +#define IX_OSAL_IXP400_UART1_MAP_SIZE (0x1000) /**< UART1 map size */ +#define IX_OSAL_IXP400_UART2_MAP_SIZE (0x1000) /**< UART2 map size */ +#define IX_OSAL_IXP400_PMU_MAP_SIZE (0x1000) /**< PMU map size */ +#define IX_OSAL_IXP400_OSTS_MAP_SIZE (0x1000) /**< OS Timers map size */ +#define IX_OSAL_IXP400_NPEA_MAP_SIZE (0x1000) /**< NPE A map size */ +#define IX_OSAL_IXP400_NPEB_MAP_SIZE (0x1000) /**< NPE B map size */ +#define IX_OSAL_IXP400_NPEC_MAP_SIZE (0x1000) /**< NPE C map size */ +#define IX_OSAL_IXP400_ETHA_MAP_SIZE (0x1000) /**< Eth A map size */ +#define IX_OSAL_IXP400_ETHB_MAP_SIZE (0x1000) /**< Eth B map size */ +#define IX_OSAL_IXP400_USB_MAP_SIZE (0x1000) /**< USB map size */ +#define IX_OSAL_IXP400_GPIO_MAP_SIZE (0x1000) /**< GPIO map size */ +#define IX_OSAL_IXP400_EXP_REG_MAP_SIZE (0x1000) /**< Exp Bus Config Registers map size */ +#define IX_OSAL_IXP400_EXP_BUS_MAP_SIZE (0x08000000) /**< Expansion bus map size */ +#define IX_OSAL_IXP400_EXP_BUS_CS0_MAP_SIZE (0x01000000) /**< CS0 map size */ +#define IX_OSAL_IXP400_EXP_BUS_CS1_MAP_SIZE (0x01000000) /**< CS1 map size */ +#define IX_OSAL_IXP400_EXP_BUS_CS4_MAP_SIZE (0x01000000) /**< CS4 map size */ +#define IX_OSAL_IXP400_PCI_CFG_MAP_SIZE (0x1000) /**< PCI Bus Config Registers map size */ + +#define IX_OSAL_IXP400_EXP_FUSE (IXP425_EXP_CONFIG_BASE + 0x28) +#define IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE 0xC800C000 +#define IX_OSAL_IXP400_ETH_NPEA_MAP_SIZE 0x1000 + +/* + * Interrupt Levels + */ +#define IX_OSAL_IXP400_NPEA_IRQ_LVL (0) +#define IX_OSAL_IXP400_NPEB_IRQ_LVL (1) +#define IX_OSAL_IXP400_NPEC_IRQ_LVL (2) +#define IX_OSAL_IXP400_QM1_IRQ_LVL (3) +#define IX_OSAL_IXP400_QM2_IRQ_LVL (4) +#define IX_OSAL_IXP400_TIMER1_IRQ_LVL (5) +#define IX_OSAL_IXP400_GPIO0_IRQ_LVL (6) +#define IX_OSAL_IXP400_GPIO1_IRQ_LVL (7) +#define IX_OSAL_IXP400_PCI_INT_IRQ_LVL (8) +#define IX_OSAL_IXP400_PCI_DMA1_IRQ_LVL (9) +#define IX_OSAL_IXP400_PCI_DMA2_IRQ_LVL (10) +#define IX_OSAL_IXP400_TIMER2_IRQ_LVL (11) +#define IX_OSAL_IXP400_USB_IRQ_LVL (12) +#define IX_OSAL_IXP400_UART2_IRQ_LVL (13) +#define IX_OSAL_IXP400_TIMESTAMP_IRQ_LVL (14) +#define IX_OSAL_IXP400_UART1_IRQ_LVL (15) +#define IX_OSAL_IXP400_WDOG_IRQ_LVL (16) +#define IX_OSAL_IXP400_AHB_PMU_IRQ_LVL (17) +#define IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL (18) +#define IX_OSAL_IXP400_GPIO2_IRQ_LVL (19) +#define IX_OSAL_IXP400_GPIO3_IRQ_LVL (20) +#define IX_OSAL_IXP400_GPIO4_IRQ_LVL (21) +#define IX_OSAL_IXP400_GPIO5_IRQ_LVL (22) +#define IX_OSAL_IXP400_GPIO6_IRQ_LVL (23) +#define IX_OSAL_IXP400_GPIO7_IRQ_LVL (24) +#define IX_OSAL_IXP400_GPIO8_IRQ_LVL (25) +#define IX_OSAL_IXP400_GPIO9_IRQ_LVL (26) +#define IX_OSAL_IXP400_GPIO10_IRQ_LVL (27) +#define IX_OSAL_IXP400_GPIO11_IRQ_LVL (28) +#define IX_OSAL_IXP400_GPIO12_IRQ_LVL (29) +#define IX_OSAL_IXP400_SW_INT1_IRQ_LVL (30) +#define IX_OSAL_IXP400_SW_INT2_IRQ_LVL (31) + +/* USB interrupt level mask */ +#define IX_OSAL_IXP400_INT_LVL_USB IRQ_IXP425_USB + +/* USB IRQ */ +#define IX_OSAL_IXP400_USB_IRQ IRQ_IXP425_USB + +/* + * OS name retrieval + */ +#define IX_OSAL_OEM_OS_NAME_GET(name, limit) \ +ixOsalOsIxp400NameGet((INT8*)(name), (INT32) (limit)) + +/* + * OS version retrieval + */ +#define IX_OSAL_OEM_OS_VERSION_GET(version, limit) \ +ixOsalOsIxp400VersionGet((INT8*)(version), (INT32) (limit)) + +/* + * Function to retrieve the OS name + */ +PUBLIC IX_STATUS ixOsalOsIxp400NameGet(INT8* osName, INT32 maxSize); + +/* + * Function to retrieve the OS version + */ +PUBLIC IX_STATUS ixOsalOsIxp400VersionGet(INT8* osVersion, INT32 maxSize); + +/* + * TimestampGet + */ +PUBLIC UINT32 ixOsalOsIxp400TimestampGet (void); + +/* + * Timestamp + */ +#define IX_OSAL_OEM_TIMESTAMP_GET ixOsalOsIxp400TimestampGet + + +/* + * Timestamp resolution + */ +PUBLIC UINT32 ixOsalOsIxp400TimestampResolutionGet (void); + +#define IX_OSAL_OEM_TIMESTAMP_RESOLUTION_GET ixOsalOsIxp400TimestampResolutionGet + +/* + * Retrieves the system clock rate + */ +PUBLIC UINT32 ixOsalOsIxp400SysClockRateGet (void); + +#define IX_OSAL_OEM_SYS_CLOCK_RATE_GET ixOsalOsIxp400SysClockRateGet + +/* + * required by FS but is not really platform-specific. + */ +#define IX_OSAL_OEM_TIME_GET(pTv) ixOsalTimeGet(pTv) + + + +/* linux map/unmap functions */ +PUBLIC void ixOsalLinuxMemMap (IxOsalMemoryMap * map); + +PUBLIC void ixOsalLinuxMemUnmap (IxOsalMemoryMap * map); + + +/********************* + * Memory map + ********************/ + +/* Global memmap only visible to IO MEM module */ + +#ifdef IxOsalIoMem_C + +IxOsalMemoryMap ixOsalGlobalMemoryMap[] = { + { + /* Global BE and LE_AC map */ + IX_OSAL_STATIC_MAP, /* type */ + 0x00000000, /* physicalAddress */ + 0x30000000, /* size */ + 0x00000000, /* virtualAddress */ + NULL, /* mapFunction */ + NULL, /* unmapFunction */ + 0, /* refCount */ + IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType */ + "global_low" /* name */ + }, + + /* SDRAM LE_DC alias */ + { + IX_OSAL_STATIC_MAP, /* type */ + 0x00000000, /* physicalAddress */ + 0x10000000, /* size */ + 0x30000000, /* virtualAddress */ + NULL, /* mapFunction */ + NULL, /* unmapFunction */ + 0, /* refCount */ + IX_OSAL_LE_DC, /* endianType */ + "sdram_dc" /* name */ + }, + + /* QMGR LE_DC alias */ + { + IX_OSAL_STATIC_MAP, /* type */ + 0x60000000, /* physicalAddress */ + 0x00100000, /* size */ + 0x60000000, /* virtualAddress */ + NULL, /* mapFunction */ + NULL, /* unmapFunction */ + 0, /* refCount */ + IX_OSAL_LE_DC, /* endianType */ + "qmgr_dc" /* name */ + }, + + /* QMGR BE alias */ + { + IX_OSAL_STATIC_MAP, /* type */ + 0x60000000, /* physicalAddress */ + 0x00100000, /* size */ + 0x60000000, /* virtualAddress */ + NULL, /* mapFunction */ + NULL, /* unmapFunction */ + 0, /* refCount */ + IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType */ + "qmgr_be" /* name */ + }, + + /* Global BE and LE_AC map */ + { + IX_OSAL_STATIC_MAP, /* type */ + 0x40000000, /* physicalAddress */ + 0x20000000, /* size */ + 0x40000000, /* virtualAddress */ + NULL, /* mapFunction */ + NULL, /* unmapFunction */ + 0, /* refCount */ + IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType */ + "Misc Cfg" /* name */ + }, + + /* Global BE and LE_AC map */ + { + IX_OSAL_STATIC_MAP, /* type */ + 0x70000000, /* physicalAddress */ + 0x8FFFFFFF, /* size */ + 0x70000000, /* virtualAddress */ + NULL, /* mapFunction */ + NULL, /* unmapFunction */ + 0, /* refCount */ + IX_OSAL_BE | IX_OSAL_LE_AC,/* endianType */ + "Exp Cfg" /* name */ + }, +}; + +#endif /* IxOsalIoMem_C */ +#endif /* #define IxOsalOsIxp400_H */ diff --git a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h new file mode 100644 index 0000000000..47ce3a2d80 --- /dev/null +++ b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h @@ -0,0 +1,404 @@ +/** + * @file IxOsalOsIxp400CustomizedMapping.h + * + * @brief Set LE coherency modes for components. + * The default setting is IX_OSAL_NO_MAPPING for LE. + * + * + * By default IX_OSAL_STATIC_MEMORY_MAP is defined for all the components. + * If any component uses a dynamic memory map it must define + * IX_OSAL_DYNAMIC_MEMORY_MAP in its corresponding section. + * + * + * @par + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalOsIxp400CustomizedMapping_H +#define IxOsalOsIxp400CustomizedMapping_H + +/* + * only include this file in Little Endian + */ + +#if defined (IX_OSAL_LINUX_BE) +#error Only include IxOsalOsIxp400CustomizedMapping.h in Little Endian +#endif + + /* + * Components don't have to be in this list if + * the default mapping is OK. + */ +#define ix_osal 1 +#define ix_dmaAcc 2 +#define ix_atmdAcc 3 + +#define ix_atmsch 5 +#define ix_ethAcc 6 +#define ix_npeMh 7 +#define ix_qmgr 8 +#define ix_npeDl 9 +#define ix_atmm 10 +#define ix_hssAcc 11 +#define ix_ethDB 12 +#define ix_ethMii 13 +#define ix_timerCtrl 14 +#define ix_adsl 15 +#define ix_usb 16 +#define ix_uartAcc 17 +#define ix_featureCtrl 18 +#define ix_cryptoAcc 19 +#define ix_unloadAcc 33 +#define ix_perfProfAcc 34 +#define ix_parityENAcc 49 +#define ix_sspAcc 51 +#define ix_timeSyncAcc 52 +#define ix_i2c 53 + +#define ix_codelets_uartAcc 21 +#define ix_codelets_timers 22 +#define ix_codelets_atm 23 +#define ix_codelets_ethAal5App 24 +#define ix_codelets_demoUtils 26 +#define ix_codelets_usb 27 +#define ix_codelets_hssAcc 28 +#define ix_codelets_dmaAcc 40 +#define ix_codelets_cryptoAcc 41 +#define ix_codelets_perfProfAcc 42 +#define ix_codelets_ethAcc 43 +#define ix_codelets_parityENAcc 54 +#define ix_codelets_timeSyncAcc 55 + + +#endif /* IxOsalOsIxp400CustomizedMapping_H */ + + +/*************************** + * osal + ***************************/ +#if (IX_COMPONENT_NAME == ix_osal) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* osal */ + +/*************************** + * dmaAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_dmaAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* dmaAcc */ + +/*************************** + * atmdAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_atmdAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* atmdAcc */ + +/*************************** + * atmsch + ***************************/ +#if (IX_COMPONENT_NAME == ix_atmsch) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* atmsch */ + +/*************************** + * ethAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_ethAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* ethAcc */ + +/*************************** + * npeMh + ***************************/ +#if (IX_COMPONENT_NAME == ix_npeMh) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* npeMh */ + +/*************************** + * qmgr + ***************************/ +#if (IX_COMPONENT_NAME == ix_qmgr) + +#define IX_OSAL_LE_DC_MAPPING + +#endif /* qmgr */ + +/*************************** + * npeDl + ***************************/ +#if (IX_COMPONENT_NAME == ix_npeDl) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* npeDl */ + +/*************************** + * atmm + ***************************/ +#if (IX_COMPONENT_NAME == ix_atmm) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* atmm */ + +/*************************** + * ethMii + ***************************/ +#if (IX_COMPONENT_NAME == ix_ethMii) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* ethMii */ + + +/*************************** + * adsl + ***************************/ +#if (IX_COMPONENT_NAME == ix_adsl) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* adsl */ + +/*************************** + * usb + ***************************/ +#if (IX_COMPONENT_NAME == ix_usb) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* usb */ + +/*************************** + * uartAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_uartAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* uartAcc */ + +/*************************** + * featureCtrl + ***************************/ +#if (IX_COMPONENT_NAME == ix_featureCtrl) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* featureCtrl */ + +/*************************** + * cryptoAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_cryptoAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* cryptoAcc */ + +/*************************** + * codelets_usb + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_usb) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_usb */ + + +/*************************** + * codelets_uartAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_uartAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_uartAcc */ + + + +/*************************** + * codelets_timers + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_timers) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_timers */ + +/*************************** + * codelets_atm + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_atm) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_atm */ + +/*************************** + * codelets_ethAal5App + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_ethAal5App) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_ethAal5App */ + +/*************************** + * codelets_ethAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_ethAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_ethAcc */ + + +/*************************** + * codelets_demoUtils + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_demoUtils) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_demoUtils */ + + + +/*************************** + * perfProfAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_perfProfAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* perfProfAcc */ + + +/*************************** + * unloadAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_unloadAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* unloadAcc */ + + + + + +/*************************** + * parityENAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_parityENAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* parityENAcc */ + +/*************************** + * codelets_parityENAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_parityENAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_parityENAcc */ + + + + +/*************************** + * timeSyncAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_timeSyncAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* timeSyncAcc */ + + +/*************************** + * codelets_timeSyncAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_codelets_timeSyncAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* codelets_timeSyncAcc */ + + + + +/*************************** + * i2c + ***************************/ +#if (IX_COMPONENT_NAME == ix_i2c) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* i2c */ + + + +/*************************** + * sspAcc + ***************************/ +#if (IX_COMPONENT_NAME == ix_sspAcc) + +#define IX_OSAL_LE_AC_MAPPING + +#endif /* sspAcc */ + + diff --git a/drivers/net/npe/include/IxOsalOsTypes.h b/drivers/net/npe/include/IxOsalOsTypes.h new file mode 100644 index 0000000000..272eef185e --- /dev/null +++ b/drivers/net/npe/include/IxOsalOsTypes.h @@ -0,0 +1,60 @@ +#ifndef IxOsalOsTypes_H +#define IxOsalOsTypes_H + +#include <asm/types.h> + +typedef s64 INT64; +typedef u64 UINT64; +typedef s32 INT32; +typedef u32 UINT32; +typedef s16 INT16; +typedef u16 UINT16; +typedef s8 INT8; +typedef u8 UINT8; + +typedef u32 ULONG; +typedef u16 USHORT; +typedef u8 UCHAR; +typedef u32 BOOL; + +#if 0 /* FIXME */ + +/* Default stack limit is 10 KB */ +#define IX_OSAL_OS_THREAD_DEFAULT_STACK_SIZE (10240) + +/* Maximum stack limit is 32 MB */ +#define IX_OSAL_OS_THREAD_MAX_STACK_SIZE (33554432) /* 32 MBytes */ + +/* Default thread priority */ +#define IX_OSAL_OS_DEFAULT_THREAD_PRIORITY (90) + +/* Thread maximum priority (0 - 255). 0 - highest priority */ +#define IX_OSAL_OS_MAX_THREAD_PRIORITY (255) + +#endif /* FIXME */ + +#define IX_OSAL_OS_WAIT_FOREVER (-1L) +#define IX_OSAL_OS_WAIT_NONE 0 + + +/* Thread handle is eventually an int type */ +typedef int IxOsalOsThread; + +/* Semaphore handle FIXME */ +typedef int IxOsalOsSemaphore; + +/* Mutex handle */ +typedef int IxOsalOsMutex; + +/* + * Fast mutex handle - fast mutex operations are implemented in + * native assembler code using atomic test-and-set instructions + */ +typedef int IxOsalOsFastMutex; + +typedef struct +{ +} IxOsalOsMessageQueue; + + +#endif /* IxOsalOsTypes_H */ diff --git a/drivers/net/npe/include/IxOsalOsUtilitySymbols.h b/drivers/net/npe/include/IxOsalOsUtilitySymbols.h new file mode 100644 index 0000000000..beb45a0794 --- /dev/null +++ b/drivers/net/npe/include/IxOsalOsUtilitySymbols.h @@ -0,0 +1,4 @@ +#ifndef IxOsalOsUtilitySymbols_H +#define IxOsalOsUtilitySymbols_H + +#endif /* IxOsalOsUtilitySymbols_H */ diff --git a/drivers/net/npe/include/IxOsalTypes.h b/drivers/net/npe/include/IxOsalTypes.h new file mode 100644 index 0000000000..a190a707e3 --- /dev/null +++ b/drivers/net/npe/include/IxOsalTypes.h @@ -0,0 +1,401 @@ +/** + * @file IxOsalTypes.h + * + * @brief Define OSAL basic data types. + * + * This file contains fundamental data types used by OSAL. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + + +#ifndef IxOsalTypes_H +#define IxOsalTypes_H + +#include <config.h> +#include <common.h> + +#define __ixp42X /* sr: U-Boot needs this define */ +#define IXP425_EXP_CFG_BASE 0xC4000000 +#define diag_printf debug + +#undef SIMSPARCSOLARIS +#define SIMSPARCSOLARIS 0xaffe /* sr: U-Boot gets confused with this solaris define */ + +/* + * Include the OS-specific type definitions + */ +#include "IxOsalOsTypes.h" +/** + * @defgroup IxOsalTypes Osal basic data types. + * + * @brief Basic data types for Osal + * + * @{ + */ + +/** + * @brief OSAL status + * + * @note Possible OSAL return status include IX_SUCCESS and IX_FAIL. + */ +typedef UINT32 IX_STATUS; + +/** + * @brief VUINT32 + * + * @note volatile UINT32 + */ +typedef volatile UINT32 VUINT32; + +/** + * @brief VINT32 + * + * @note volatile INT32 + */ +typedef volatile INT32 VINT32; + + +#ifndef NUMELEMS +#define NUMELEMS(x) (sizeof(x) / sizeof((x)[0])) +#endif + + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_BILLION + * + * @brief Alias for 1,000,000,000 + * + */ +#define IX_OSAL_BILLION (1000000000) + +#ifndef TRUE +#define TRUE 1L +#endif + +#if TRUE != 1 +#error TRUE is not defined to 1 +#endif + +#ifndef FALSE +#define FALSE 0L +#endif + +#if FALSE != 0 +#error FALSE is not defined to 0 +#endif + +#ifndef NULL +#define NULL 0L +#endif + +/** + * @ingroup IxOsalTypes + * + * @def IX_SUCCESS + * + * @brief Success status + * + */ +#ifndef IX_SUCCESS +#define IX_SUCCESS 0L /**< #defined as 0L */ +#endif + +/** + * @ingroup IxOsalTypes + * + * @def IX_FAIL + * + * @brief Failure status + * + */ +#ifndef IX_FAIL +#define IX_FAIL 1L /**< #defined as 1L */ +#endif + + +#ifndef PRIVATE +#ifdef IX_PRIVATE_OFF +#define PRIVATE /* nothing */ +#else +#define PRIVATE static /**< #defined as static, except for debug builds */ +#endif /* IX_PRIVATE_OFF */ +#endif /* PRIVATE */ + + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_INLINE + * + * @brief Alias for __inline + * + */ +#ifndef IX_OSAL_INLINE +#define IX_OSAL_INLINE __inline +#endif /* IX_OSAL_INLINE */ + + +#ifndef __inline__ +#define __inline__ IX_OSAL_INLINE +#endif + + +/* Each OS can define its own PUBLIC, otherwise it will be empty. */ +#ifndef PUBLIC +#define PUBLIC +#endif /* PUBLIC */ + + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_INLINE_EXTERN + * + * @brief Alias for __inline extern + * + */ +#ifndef IX_OSAL_INLINE_EXTERN +#define IX_OSAL_INLINE_EXTERN IX_OSAL_INLINE extern +#endif + +/** + * @ingroup IxOsalTypes + * @enum IxOsalLogDevice + * @brief This is an emum for OSAL log devices. + */ +typedef enum +{ + IX_OSAL_LOG_DEV_STDOUT = 0, /**< standard output (implemented by default) */ + IX_OSAL_LOG_DEV_STDERR = 1, /**< standard error (implemented */ + IX_OSAL_LOG_DEV_HEX_DISPLAY = 2, /**< hexadecimal display (not implemented) */ + IX_OSAL_LOG_DEV_ASCII_DISPLAY = 3 /**< ASCII-capable display (not implemented) */ +} IxOsalLogDevice; + + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_LOG_ERROR + * + * @brief Alias for -1, used as log function error status + * + */ +#define IX_OSAL_LOG_ERROR (-1) + +/** + * @ingroup IxOsalTypes + * @enum IxOsalLogLevel + * @brief This is an emum for OSAL log trace level. + */ +typedef enum +{ + IX_OSAL_LOG_LVL_NONE = 0, /**<No trace level */ + IX_OSAL_LOG_LVL_USER = 1, /**<Set trace level to user */ + IX_OSAL_LOG_LVL_FATAL = 2, /**<Set trace level to fatal */ + IX_OSAL_LOG_LVL_ERROR = 3, /**<Set trace level to error */ + IX_OSAL_LOG_LVL_WARNING = 4, /**<Set trace level to warning */ + IX_OSAL_LOG_LVL_MESSAGE = 5, /**<Set trace level to message */ + IX_OSAL_LOG_LVL_DEBUG1 = 6, /**<Set trace level to debug1 */ + IX_OSAL_LOG_LVL_DEBUG2 = 7, /**<Set trace level to debug2 */ + IX_OSAL_LOG_LVL_DEBUG3 = 8, /**<Set trace level to debug3 */ + IX_OSAL_LOG_LVL_ALL /**<Set trace level to all */ +} IxOsalLogLevel; + + +/** + * @ingroup IxOsalTypes + * @brief Void function pointer prototype + * + * @note accepts a void pointer parameter + * and does not return a value. + */ +typedef void (*IxOsalVoidFnVoidPtr) (void *); + +typedef void (*IxOsalVoidFnPtr) (void); + + +/** + * @brief Timeval structure + * + * @note Contain subfields of seconds and nanoseconds.. + */ +typedef struct +{ + UINT32 secs; /**< seconds */ + UINT32 nsecs; /**< nanoseconds */ +} IxOsalTimeval; + + +/** + * @ingroup IxOsalTypes + * @brief IxOsalTimer + * + * @note OSAL timer handle + * + */ +typedef UINT32 IxOsalTimer; + + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_WAIT_FOREVER + * + * @brief Definition for timeout forever, OS-specific. + * + */ +#define IX_OSAL_WAIT_FOREVER IX_OSAL_OS_WAIT_FOREVER + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_WAIT_NONE + * + * @brief Definition for timeout 0, OS-specific. + * + */ +#define IX_OSAL_WAIT_NONE IX_OSAL_OS_WAIT_NONE + + +/** + * @ingroup IxOsalTypes + * @brief IxOsalMutex + * + * @note Mutex handle, OS-specific + * + */ +typedef IxOsalOsMutex IxOsalMutex; + +/** + * @ingroup IxOsalTypes + * @brief IxOsalFastMutex + * + * @note FastMutex handle, OS-specific + * + */ +typedef IxOsalOsFastMutex IxOsalFastMutex; + +/** + * @ingroup IxOsalTypes + * @brief IxOsalThread + * + * @note Thread handle, OS-specific + * + */ +typedef IxOsalOsThread IxOsalThread; + +/** + * @ingroup IxOsalTypes + * @brief IxOsalSemaphore + * + * @note Semaphore handle, OS-specific + * + */ +typedef IxOsalOsSemaphore IxOsalSemaphore; + +/** + * @ingroup IxOsalTypes + * @brief IxOsalMessageQueue + * + * @note Message Queue handle, OS-specific + * + */ +typedef IxOsalOsMessageQueue IxOsalMessageQueue; + + +/** + * @brief Thread Attribute + * @note Default thread attribute + */ +typedef struct +{ + char *name; /**< name */ + UINT32 stackSize; /**< stack size */ + UINT32 priority; /**< priority */ +} IxOsalThreadAttr; + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_THREAD_DEFAULT_STACK_SIZE + * + * @brief Default thread stack size, OS-specific. + * + */ +#define IX_OSAL_THREAD_DEFAULT_STACK_SIZE (IX_OSAL_OS_THREAD_DEFAULT_STACK_SIZE) + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_THREAD_MAX_STACK_SIZE + * + * @brief Max stack size, OS-specific. + * + */ +#define IX_OSAL_THREAD_MAX_STACK_SIZE (IX_OSAL_OS_THREAD_MAX_STACK_SIZE) + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_DEFAULT_THREAD_PRIORITY + * + * @brief Default thread priority, OS-specific. + * + */ +#define IX_OSAL_DEFAULT_THREAD_PRIORITY (IX_OSAL_OS_DEFAULT_THREAD_PRIORITY) + +/** + * @ingroup IxOsalTypes + * + * @def IX_OSAL_MAX_THREAD_PRIORITY + * + * @brief Max thread priority, OS-specific. + * + */ +#define IX_OSAL_MAX_THREAD_PRIORITY (IX_OSAL_OS_MAX_THREAD_PRIORITY) + +/** + * @} IxOsalTypes + */ + + +#endif /* IxOsalTypes_H */ diff --git a/drivers/net/npe/include/IxOsalUtilitySymbols.h b/drivers/net/npe/include/IxOsalUtilitySymbols.h new file mode 100644 index 0000000000..f2a73db8b9 --- /dev/null +++ b/drivers/net/npe/include/IxOsalUtilitySymbols.h @@ -0,0 +1,51 @@ +/** + * @file + * + * @brief OSAL Configuration header file + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxOsalUtilitySymbols_H +#define IxOsalUtilitySymbols_H + +#include "IxOsalOsUtilitySymbols.h" /* OS-specific utility symbol definitions */ + +#endif /* IxOsalUtilitySymbols_H */ diff --git a/drivers/net/npe/include/IxParityENAcc.h b/drivers/net/npe/include/IxParityENAcc.h new file mode 100644 index 0000000000..62fe1714f1 --- /dev/null +++ b/drivers/net/npe/include/IxParityENAcc.h @@ -0,0 +1,785 @@ +/** + * @file IxParityENAcc.h + * + * @author Intel Corporation + * @date 24 Mar 2004 + * + * @brief This file contains the public API for the IXP400 Parity Error + * Notifier access component. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxParityENAcc IXP400 Parity Error Notifier (IxParityENAcc) API + * + * @brief The public API for the Parity Error Notifier + * + * @{ + */ + +#ifndef IXPARITYENACC_H +#define IXPARITYENACC_H + +#ifdef __ixp46X + +#include "IxOsal.h" + +/* + * #defines for function return types, etc. + */ + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccStatus + * + * @brief The status as returend from the API + */ +typedef enum /**< IxParityENAccStatus */ +{ + IX_PARITYENACC_SUCCESS = IX_SUCCESS, /**< The request is successful */ + IX_PARITYENACC_INVALID_PARAMETERS, /**< Invalid or NULL parameters passed */ + IX_PARITYENACC_NOT_INITIALISED, /**< Access layer has not been initialised before accessing the APIs */ + IX_PARITYENACC_ALREADY_INITIALISED, /**< Access layer has already been initialised */ + IX_PARITYENACC_OPERATION_FAILED, /**< Operation did not succeed due to hardware failure */ + IX_PARITYENACC_NO_PARITY /**< No parity condition exits or has already been cleared */ +} IxParityENAccStatus; + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccParityType + * + * @brief Odd or Even Parity Type + */ +typedef enum /**< IxParityENAccParityType */ +{ + IX_PARITYENACC_EVEN_PARITY, /**< Even Parity */ + IX_PARITYENACC_ODD_PARITY /**< Odd Parity */ +} IxParityENAccParityType; + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccConfigOption + * + * @brief The parity error enable/disable configuration option + */ +typedef enum /**< IxParityENAccConfigOption */ +{ + IX_PARITYENACC_DISABLE, /**< Disable parity error detection */ + IX_PARITYENACC_ENABLE /**< Enable parity error detection */ +} IxParityENAccConfigOption; + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccNpeConfig + * + * @brief NPE parity detection is to be enabled/disabled + */ +typedef struct /**< IxParityENAccNpeConfig */ +{ + IxParityENAccConfigOption ideEnabled; /**< NPE IMem, DMem and External */ + IxParityENAccParityType parityOddEven; /**< Parity - Odd or Even */ +} IxParityENAccNpeConfig ; + + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccMcuConfig + * + * @brief MCU pairty detection is to be enabled/disabled + */ +typedef struct /**< IxParityENAccMcuConfig */ +{ + IxParityENAccConfigOption singlebitDetectEnabled; /**< Single-bit parity error detection */ + IxParityENAccConfigOption singlebitCorrectionEnabled; /**< Single-bit parity error correction */ + IxParityENAccConfigOption multibitDetectionEnabled; /**< Multi-bit parity error detection */ +} IxParityENAccMcuConfig ; + + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccEbcConfig + * + * @brief Expansion Bus Controller parity detection is to be enabled or disabled + * + * Note: All the Chip Select(s) and External Masters will have the same parity + */ +typedef struct /**< IxParityENAccEbcConfig */ +{ + IxParityENAccConfigOption ebcCs0Enabled; /**< Expansion Bus Controller - Chip Select 0 */ + IxParityENAccConfigOption ebcCs1Enabled; /**< Expansion Bus Controller - Chip Select 1 */ + IxParityENAccConfigOption ebcCs2Enabled; /**< Expansion Bus Controller - Chip Select 2 */ + IxParityENAccConfigOption ebcCs3Enabled; /**< Expansion Bus Controller - Chip Select 3 */ + IxParityENAccConfigOption ebcCs4Enabled; /**< Expansion Bus Controller - Chip Select 4 */ + IxParityENAccConfigOption ebcCs5Enabled; /**< Expansion Bus Controller - Chip Select 5 */ + IxParityENAccConfigOption ebcCs6Enabled; /**< Expansion Bus Controller - Chip Select 6 */ + IxParityENAccConfigOption ebcCs7Enabled; /**< Expansion Bus Controller - Chip Select 7 */ + IxParityENAccConfigOption ebcExtMstEnabled; /**< External Master on Expansion bus */ + IxParityENAccParityType parityOddEven; /**< Parity - Odd or Even */ +} IxParityENAccEbcConfig ; + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccHWParityConfig + * + * @brief Parity error configuration of the Hardware Blocks + */ +typedef struct /**< IxParityENAccHWParityConfig */ +{ + IxParityENAccNpeConfig npeAConfig; /**< NPE A parity detection is to be enabled/disabled */ + IxParityENAccNpeConfig npeBConfig; /**< NPE B parity detection is to be enabled/disabled */ + IxParityENAccNpeConfig npeCConfig; /**< NPE C parity detection is to be enabled/disabled */ + IxParityENAccMcuConfig mcuConfig; /**< MCU pairty detection is to be enabled/disabled */ + IxParityENAccConfigOption swcpEnabled; /**< SWCP parity detection is to be enabled */ + IxParityENAccConfigOption aqmEnabled; /**< AQM parity detection is to be enabled */ + IxParityENAccEbcConfig ebcConfig; /**< Expansion Bus Controller parity detection is to be enabled/disabled */ +} IxParityENAccHWParityConfig; + + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccNpeParityErrorStats + * + * @brief NPE parity error statistics + */ +typedef struct /* IxParityENAccNpeParityErrorStats */ +{ + UINT32 parityErrorsIMem; /**< Parity errors in Instruction Memory */ + UINT32 parityErrorsDMem; /**< Parity errors in Data Memory */ + UINT32 parityErrorsExternal; /**< Parity errors in NPE External Entities */ +} IxParityENAccNpeParityErrorStats; + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccMcuParityErrorStats + * + * @brief DDR Memory Control Unit parity error statistics + * + * Note: There could be two outstanding parity errors at any given time whose address + * details captured. If there is no room for the new interrupt then it would be treated + * as overflow parity condition. + */ +typedef struct /* IxParityENAccMcuParityErrorStats */ +{ + UINT32 parityErrorsSingleBit; /**< Parity errors of the type Single-Bit */ + UINT32 parityErrorsMultiBit; /**< Parity errors of the type Multi-Bit */ + UINT32 parityErrorsOverflow; /**< Parity errors when more than two parity errors occured */ +} IxParityENAccMcuParityErrorStats; + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccEbcParityErrorStats + * + * @brief Expansion Bus Controller parity error statistics + */ +typedef struct /* IxParityENAccEbcParityErrorStats */ +{ + UINT32 parityErrorsInbound; /**< Odd bit parity errors on inbound transfers */ + UINT32 parityErrorsOutbound; /**< Odd bit parity errors on outbound transfers */ +} IxParityENAccEbcParityErrorStats; + + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccParityErrorStats + * + * @brief Parity Error Statistics for the all the hardware blocks + */ +typedef struct /**< IxParityENAccParityErrorStats */ +{ + IxParityENAccNpeParityErrorStats npeStats; /**< NPE parity error statistics */ + IxParityENAccMcuParityErrorStats mcuStats; /**< MCU parity error statistics */ + IxParityENAccEbcParityErrorStats ebcStats; /**< EBC parity error statistics */ + UINT32 swcpStats; /**< SWCP parity error statistics */ + UINT32 aqmStats; /**< AQM parity error statistics */ +} IxParityENAccParityErrorStats; + + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccParityErrorSource + * + * @brief The source of the parity error notification + */ +typedef enum /**< IxParityENAccParityErrorSource */ +{ + IX_PARITYENACC_NPE_A_IMEM, /**< NPE A - Instruction memory */ + IX_PARITYENACC_NPE_A_DMEM, /**< NPE A - Data memory */ + IX_PARITYENACC_NPE_A_EXT, /**< NPE A - External Entity*/ + IX_PARITYENACC_NPE_B_IMEM, /**< NPE B - Instruction memory */ + IX_PARITYENACC_NPE_B_DMEM, /**< NPE B - Data memory */ + IX_PARITYENACC_NPE_B_EXT, /**< NPE B - External Entity*/ + IX_PARITYENACC_NPE_C_IMEM, /**< NPE C - Instruction memory */ + IX_PARITYENACC_NPE_C_DMEM, /**< NPE C - Data memory */ + IX_PARITYENACC_NPE_C_EXT, /**< NPE C - External Entity*/ + IX_PARITYENACC_SWCP, /**< SWCP */ + IX_PARITYENACC_AQM, /**< AQM */ + IX_PARITYENACC_MCU_SBIT, /**< DDR Memory Controller Unit - Single bit parity */ + IX_PARITYENACC_MCU_MBIT, /**< DDR Memory Controller Unit - Multi bit parity */ + IX_PARITYENACC_MCU_OVERFLOW, /**< DDR Memory Controller Unit - Parity errors in excess of two */ + IX_PARITYENACC_EBC_CS, /**< Expansion Bus Controller - Chip Select */ + IX_PARITYENACC_EBC_EXTMST /**< Expansion Bus Controller - External Master */ +} IxParityENAccParityErrorSource; + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccParityErrorAccess + * + * @brief The type of access resulting in parity error + */ +typedef enum /**< IxParityENAccParityErrorAccess */ +{ + IX_PARITYENACC_READ, /**< Read Access */ + IX_PARITYENACC_WRITE /**< Write Access */ +} IxParityENAccParityErrorAccess; + +/** + * @ingroup IxParityENAcc + * + * @typedef IxParityENAccParityErrorAddress + * + * @brief The memory location which has parity error + */ +typedef UINT32 IxParityENAccParityErrorAddress; + +/** + * @ingroup IxParityENAcc + * + * @typedef IxParityENAccParityErrorData + * + * @brief The data read from the memory location which has parity error + */ +typedef UINT32 IxParityENAccParityErrorData; + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccParityErrorRequester + * + * @brief The requester interface through which the SDRAM memory access + * resulted in the parity error. + */ +typedef enum /**< IxParityENAccParityErrorRequester */ +{ + IX_PARITYENACC_MPI, /**< Direct Memory Port Interface */ + IX_PARITYENACC_AHB_BUS /**< South or North AHB Bus */ +} IxParityENAccParityErrorRequester; + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccAHBErrorMaster + * + * @brief The Master on the AHB bus interface whose transaction might have + * resulted in the parity error notification to XScale. + */ +typedef enum /**< IxParityENAccAHBErrorMaster */ +{ + IX_PARITYENACC_AHBN_MST_NPE_A, /**< NPE - A */ + IX_PARITYENACC_AHBN_MST_NPE_B, /**< NPE - B */ + IX_PARITYENACC_AHBN_MST_NPE_C, /**< NPE - C */ + IX_PARITYENACC_AHBS_MST_XSCALE, /**< XScale Bus Interface Unit */ + IX_PARITYENACC_AHBS_MST_PBC, /**< PCI Bus Controller */ + IX_PARITYENACC_AHBS_MST_EBC, /**< Expansion Bus Controller */ + IX_PARITYENACC_AHBS_MST_AHB_BRIDGE, /**< AHB Bridge */ + IX_PARITYENACC_AHBS_MST_USBH /**< USB Host Controller */ +} IxParityENAccAHBErrorMaster; + +/** + * @ingroup IxParityENAcc + * + * @enum IxParityENAccAHBErrorSlave + * + * @brief The Slave on the AHB bus interface whose transaction might have + * resulted in the parity error notification to XScale. + */ +typedef enum /**< IxParityENAccAHBErrorSlave */ +{ + IX_PARITYENACC_AHBN_SLV_MCU, /**< Memory Control Unit */ + IX_PARITYENACC_AHBN_SLV_AHB_BRIDGE, /**< AHB Bridge */ + IX_PARITYENACC_AHBS_SLV_MCU, /**< XScale Bus Interface Unit */ + IX_PARITYENACC_AHBS_SLV_APB_BRIDGE, /**< APB Bridge */ + IX_PARITYENACC_AHBS_SLV_AQM, /**< AQM */ + IX_PARITYENACC_AHBS_SLV_RSA, /**< RSA (Crypto Bus) */ + IX_PARITYENACC_AHBS_SLV_PBC, /**< PCI Bus Controller */ + IX_PARITYENACC_AHBS_SLV_EBC, /**< Expansion Bus Controller */ + IX_PARITYENACC_AHBS_SLV_USBH /**< USB Host Controller */ +} IxParityENAccAHBErrorSlave; + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccAHBErrorTransaction + * + * @brief The Master and Slave on the AHB bus interface whose transaction might + * have resulted in the parity error notification to XScale. + * + * NOTE: This information may be used in the data abort exception handler + * to differentiate between the XScale and non-XScale access to the SDRAM + * memory. + */ +typedef struct /**< IxParityENAccAHBErrorTransaction */ +{ + IxParityENAccAHBErrorMaster ahbErrorMaster; /**< Master on AHB bus */ + IxParityENAccAHBErrorSlave ahbErrorSlave; /**< Slave on AHB bus */ +} IxParityENAccAHBErrorTransaction; + +/** + * @ingroup IxParityENAcc + * + * @struct IxParityENAccParityErrorContextMessage + * + * @brief Parity Error Context Message + */ +typedef struct /**< IxParityENAccParityErrorContextMessage */ +{ + IxParityENAccParityErrorSource pecParitySource; /**< Source info of parity error */ + IxParityENAccParityErrorAccess pecAccessType; /**< Read or Write Access + Read - NPE, SWCP, AQM, DDR MCU, + Exp Bus Ctrlr (Outbound) + Write - DDR MCU, + Exp Bus Ctrlr (Inbound + i.e., External Master) */ + IxParityENAccParityErrorAddress pecAddress; /**< Address faulty location + Valid only for AQM, DDR MCU, + Exp Bus Ctrlr */ + IxParityENAccParityErrorData pecData; /**< Data read from the faulty location + Valid only for AQM and DDR MCU + For DDR MCU it is the bit location + of the Single-bit parity */ + IxParityENAccParityErrorRequester pecRequester; /**< Requester of SDRAM memory access + Valid only for the DDR MCU */ + IxParityENAccAHBErrorTransaction ahbErrorTran; /**< Master and Slave information on the + last AHB Error Transaction */ +} IxParityENAccParityErrorContextMessage; + +/** + * @ingroup IxParityENAcc + * + * @typedef IxParityENAccCallback + * + * @brief This prototype shows the format of a callback function. + * + * The callback will be used to notify the parity error to the client application. + * The callback will be registered by @ref ixParityENAccCallbackRegister. + * + * It will be called from an ISR when a parity error is detected and thus + * needs to follow the interrupt callable function conventions. + * + */ +typedef void (*IxParityENAccCallback) (void); + + +/* + * Prototypes for interface functions. + */ + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccInit(void) + * + * @brief This function will initialise the IxParityENAcc component. + * + * This function will initialise the IxParityENAcc component. It should only be + * called once, prior to using the IxParityENAcc component. + * + * <OL><LI>It initialises the internal data structures, registers the ISR that + * will be triggered when a parity error occurs in IXP4xx silicon.</LI></OL> + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS - Initialization is successful + * @li IX_PARITYENACC_ALREADY_INITIALISED - The access layer has already + * been initialized + * @li IX_PARITYENACC_OPERATION_FAILED - The request failed because the + * operation didn't succeed on the hardware. Refer to error trace/log + * for details. + */ + +PUBLIC IxParityENAccStatus ixParityENAccInit(void); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccCallbackRegister ( + IxParityENAccCallback parityErrNfyCallBack) + * + * @brief This function will register a new callback with IxParityENAcc component. + * It can also reregister a new callback replacing the old callback. + * + * @param parityErrNfyCallBack [in] - This parameter will specify the call-back + * function supplied by the client application. + * + * This interface registers the user application supplied call-back handler with + * the parity error handling access component after the init. + * + * The callback function will be called from an ISR that will be triggered by the + * parity error in the IXP400 silicon. + * + * The following actions will be performed by this function: + * <OL><LI>Check for the prior initialisation of the module before registering or + * re-registering of the callback. + * Check for parity error detection disabled before re-registration of the callback. + * </LI></OL> + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS - The parameters check passed and the + * registration is successful. + * @li IX_PARITYENACC_INVALID_PARAMETERS - Request failed due to NULL + * parameter passed. + * @li IX_PARITYENACC_OPERATION_FAILED - The request failed because the + * parity error detection not yet disabled. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior to + * the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccCallbackRegister ( + IxParityENAccCallback parityErrNfyCallBack); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccParityDetectionConfigure ( + const IxParityENAccHWParityConfig *hwParityConfig) + * + * @brief This interface allows the client application to enable the parity + * error detection on the underlying hardware block. + * + * @param hwParityConfig [in] - Hardware blocks for which the parity error + * detection is to be enabled or disabled. + * + * The client application allocates and provides the reference to the buffer. + * + * It will also verify whether the specific hardware block is functional or not. + * + * NOTE: Failure in enabling or disabling of one or more components result in + * trace message but still returns IX_PARITYENACC_SUCCESS. Refer to the function + * @ref ixParityENAccParityDetectionQuery on how to verify the failures while + * enabling/disabling paritys error detection. + * + * It shall be invoked after the Init and CallbackRegister functions but before + * any other function of the IxParityENAcc layer. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS - The parameters check passed and the + * request to enable/disable is successful. + * @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to + * NULL parameter supplied. + * @li IX_PARITYENACC_OPERATION_FAILED - The request failed because the + * operation didn't succeed on the hardware. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior to + * the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccParityDetectionConfigure ( + const IxParityENAccHWParityConfig *hwParityConfig); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccParityDetectionQuery ( + IxParityENAccHWParityConfig * const hwParityConfig) + * + * @brief This interface allows the client application to determine the + * status of the parity error detection on the specified hardware blocks + * + * @param hwParityConfig [out] - Hardware blocks whose parity error detection + * has been enabled or disabled. + * + * The client application allocates and provides the reference to the buffer. + * + * This interface can be used immediately after the interface @ref + * ixParityENAccParityDetectionConfigure to see on which of the hardware blocks + * the parity error detection has either been enabled or disabled based on the + * client application request. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS - The parameters check passed and the + * request to query on whether the hardware parity error detection + * is enabled or disabled is successful. + * @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to + * NULL parameter or invalid values supplied. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior + * to the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccParityDetectionQuery( + IxParityENAccHWParityConfig * const hwParityConfig); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccParityErrorContextGet( + IxParityENAccParityErrorContextMessage * const pecMessage) + * + * @brief This interface allows the client application to determine the + * status of the parity error context on hardware block for which the + * current parity error interrupt triggered. + * + * @param pecMessage [out] - The parity error context information of the + * parity interrupt currently being process. + * + * The client application allocates and provides the reference to the buffer. + * + * Refer to the data structure @ref IxParityENAccParityErrorContextMessage + * for details. + * + * The routine will will fetch the parity error context in the following + * priority, if multiple parity errors observed. + * + * <pre> + * 0 - MCU (Multi-bit and single-bit in that order) + * 1 - NPE-A + * 2 - NPE-B + * 3 - NPE-C + * 4 - SWCP + * 5 - QM + * 6 - EXP + * + * NOTE: The information provided in the @ref IxParityENAccAHBErrorTransaction + * may be of help for the client application to decide on the course of action + * to take. This info is taken from the Performance Monitoring Unit register + * which records most recent error observed on the AHB bus. This information + * might have been overwritten by some other error by the time it is retrieved. + * </pre> + * + * @li Re-entrant : No + * @li ISR Callable : Yes + * + * @return @li IX_PARITYENACC_SUCCESS-The parameters check passed and the + * request to get the parity error context information is successful. + * @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to + * NULL parameter is passed + * @li IX_PARITYENACC_OPERATION_FAILED - The request failed because + * the operation didn't succeed on the hardware. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior + * to the initialisation of the access layer. + * @li IX_PARITYENACC_NO_PARITY - No parity condition exits or has + * already been cleared + */ + +PUBLIC IxParityENAccStatus ixParityENAccParityErrorContextGet( + IxParityENAccParityErrorContextMessage * const pecMessage); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccParityErrorInterruptClear ( + const IxParityENAccParityErrorContextMessage *pecMessage) + * + * @brief This interface helps the client application to clear off the + * interrupt condition on the hardware block identified in the parity + * error context message. Please refer to the table below as the operation + * varies depending on the interrupt source. + * + * @param pecMessage [in] - The parity error context information of the + * hardware block whose parity error interrupt condition is to disabled. + * + * The client application allocates and provides the reference to the buffer. + * + * <pre> + * **************************************************************************** + * Following actions will be taken during the interrupt clear for respective + * hardware blocks. + * + * Parity Source Actions taken during Interrupt clear + * ------------- ------------------------------------------------------- + * NPE-A Interrupt will be masked off at the interrupt controller + * so that it will not trigger continuously. + * Client application has to take appropriate action and + * re-configure the parity error detection subsequently. + * The client application will not be notified of further + * interrupts, until the re-configuration is done using + * @ref ixParityENAccParityDetectionConfigure. + * + * NPE-B Interrupt will be masked off at the interrupt controller + * so that it will not trigger continuously. + * Client application has to take appropriate action and + * re-configure the parity error detection subsequently. + * The client application will not be notified of further + * interrupts, until the re-configuration is done using + * @ref ixParityENAccParityDetectionConfigure. + * + * NPE-C Interrupt will be masked off at the interrupt controller + * Client application has to take appropriate action and + * re-configure the parity error detection subsequently. + * The client application will not be notified of further + * interrupts, until the re-configuration is done using + * @ref ixParityENAccParityDetectionConfigure. + * + * SWCP Interrupt will be masked off at the interrupt controller. + * Client application has to take appropriate action and + * re-configure the parity error detection subsequently. + * The client application will not be notified of further + * interrupts, until the re-configuration is done using + * @ref ixParityENAccParityDetectionConfigure. + * + * AQM Interrupt will be masked off at the interrupt controller. + * Client application has to take appropriate action and + * re-configure the parity error detection subsequently. + * The client application will not be notified of further + * interrupts, until the re-configuration is done using + * @ref ixParityENAccParityDetectionConfigure. + * + * MCU Parity interrupt condition is cleared at the SDRAM MCU for + * the following: + * 1. Single-bit + * 2. Multi-bit + * 3. Overflow condition i.e., more than two parity conditions + * occurred + * Note that single-parity errors do not result in data abort + * and not all data aborts caused by multi-bit parity error. + * + * EXP Parity interrupt condition is cleared at the expansion bus + * controller for the following: + * 1. External master initiated Inbound write + * 2. Internal master (IXP400) initiated Outbound read + * **************************************************************************** + * </pre> + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS-The parameters check passed and the request + * to clear the parity error interrupt condition is successful. + * @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to + * NULL parameters have been passed or contents have been + * supplied with invalid values. + * @li IX_PARITYENACC_OPERATION_FAILED - The request failed because + * the operation didn't succeed on the hardware. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior + * to the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccParityErrorInterruptClear ( + const IxParityENAccParityErrorContextMessage *pecMessage); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccStatsGet ( + IxParityENAccParityErrorStats * const ixParityErrorStats) + * + * @brief This interface allows the client application to retrieve parity + * error statistics for all the hardware blocks + * + * @param ixParityErrorStats - [out] The statistics for all the hardware blocks. + * + * The client application allocates and provides the reference to the buffer. + * + * @li Re-entrant : No + * @li ISR Callable : Yes + * + * @return @li IX_PARITYENACC_SUCCESS-The parameters check passed and the + * request to retrieve parity error statistics for the hardware + * block is successful. + * @li IX_PARITYENACC_INVALID_PARAMETERS-The request failed due to a + * NULL parameter passed. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested prior + * to the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccStatsGet ( + IxParityENAccParityErrorStats * const ixParityErrorStats); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccStatsShow (void) + * + * @brief This interface allows the client application to print all the + * parity error statistics. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS - The request to show the pairty + * error statistics is successful. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested + * prior to the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccStatsShow (void); + +/** + * @ingroup IxParityENAcc + * + * @fn IxParityENAccStatus ixParityENAccStatsReset (void) + * + * @brief This interface allows the client application to reset all the + * parity error statistics. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_PARITYENACC_SUCCESS - The request to reset the parity + * error statistics is successful. + * @li IX_PARITYENACC_NOT_INITIALISED - The operation requested + * prior to the initialisation of the access layer. + */ + +PUBLIC IxParityENAccStatus ixParityENAccStatsReset (void); + +#endif /* IXPARITYENACC_H */ +#endif /* __ixp46X */ + +/** + * @} defgroup IxParityENAcc + */ + diff --git a/drivers/net/npe/include/IxPerfProfAcc.h b/drivers/net/npe/include/IxPerfProfAcc.h new file mode 100644 index 0000000000..65c0ba96ab --- /dev/null +++ b/drivers/net/npe/include/IxPerfProfAcc.h @@ -0,0 +1,1358 @@ +/** + * @file IxPerfProfAcc.h + * + * @brief Header file for the IXP400 Perf Prof component (IxPerfProfAcc) + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxPerfProfAcc IXP400 Performance Profiling (IxPerfProfAcc) API + * + * @brief IXP400 Performance Profiling Utility component Public API. + * @li NOTE: Xcycle measurement is not supported in Linux. + * + * + * @{ + */ +#ifndef IXPERFPROFACC_H +#define IXPERFPROFACC_H + +#include "IxOsal.h" + +#ifdef __linux +#include <linux/proc_fs.h> +#endif + +/* + * Section for #define + */ +/** + * @ingroup IxPerfProfAcc + * + * @def IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES + * + * @brief This is the maximum number of profiling samples allowed, which can be + * modified according to the user's discretion + */ +#define IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES 0xFFFF + +/** + * @ingroup IxPerfProfAcc + * + * @def IX_PERFPROF_ACC_BUS_PMU_MAX_PECS + * + * @brief This is the maximum number of Programmable Event Counters available. + * This is a hardware specific and fixed value. Do not change. + * + */ +#define IX_PERFPROF_ACC_BUS_PMU_MAX_PECS 7 + +/** + * @ingroup IxPerfProfAcc + * + * @def IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS + * + * @brief Max number of measurement allowed. This constant is used when + * creating storage array for Xcycle. When run in continuous mode, + * Xcycle will wrap around and re-use buffer. + */ +#define IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS 600 + +#ifdef __linux +/** + * @ingroup IxPerfProfAcc + * + * @def IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY + * + * @brief Level of accuracy required for matching the PC Address to + * symbol address. This is used when the XScale PMU time/event + * sampling functions get the PC address and search for the + * corresponding symbol address. + */ +#define IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY 0xffff + +#endif /*__linux*/ + +/** + * @ingroup IxPerfProfAcc + * + * @def IX_PERFPROF_ACC_LOG + * + * @brief Mechanism for logging a formatted message for the PerfProfAcc component + * + * @param level UINT32 [in] - trace level + * @param device UINT32 [in] - output device + * @param str char* [in] - format string, similar to printf(). + * @param a UINT32 [in] - first argument to display + * @param b UINT32 [in] - second argument to display + * @param c UINT32 [in] - third argument to display + * @param d UINT32 [in] - fourth argument to display + * @param e UINT32 [in] - fifth argument to display + * @param f UINT32 [in] - sixth argument to display + * + * @return none + */ +#ifndef NDEBUG +#define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f)\ + (ixOsalLog (level, device, str, a, b, c, d, e, f)) +#else /*do nothing*/ +#define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f) +#endif /*ifdef NDEBUG */ + +/* + * Section for struct + */ + +/** + * @brief contains summary of samples taken + * + * Structure contains all details of each program counter value - frequency + * that PC occurs + */ +typedef struct +{ + UINT32 programCounter; /**<the program counter value of the sample*/ + UINT32 freq; /**<the frequency of the occurence of the sample*/ +} IxPerfProfAccXscalePmuSamplePcProfile; + +/** + * @brief contains results of a counter + * + * Structure contains the results of a counter, which are split into the lower + * and upper 32 bits of the final count + */ +typedef struct +{ + UINT32 lower32BitsEventCount; /**<lower 32bits value of the event counter*/ + UINT32 upper32BitsEventCount; /**<upper 32bits value of the event counter*/ +} IxPerfProfAccXscalePmuEvtCnt; + +/** + * @brief contains results of counters and their overflow + * + * Structure contains all values of counters and associated overflows. The + * specific event and clock counters are determined by the user + */ +typedef struct +{ + UINT32 clk_value; /**<current value of clock counter*/ + UINT32 clk_samples; /**<number of clock counter overflows*/ + UINT32 event1_value; /**<current value of event 1 counter*/ + UINT32 event1_samples; /**<number of event 1 counter overflows*/ + UINT32 event2_value; /**<current value of event 2 counter*/ + UINT32 event2_samples; /**<number of event 2 counter overflows*/ + UINT32 event3_value; /**<current value of event 3 counter*/ + UINT32 event3_samples; /**<number of event 3 counter overflows*/ + UINT32 event4_value; /**<current value of event 4 counter*/ + UINT32 event4_samples; /**<number of event 4 counter overflows*/ +} IxPerfProfAccXscalePmuResults; + +/** + * + * @brief Results obtained from Xcycle run + */ +typedef struct +{ + float maxIdlePercentage; /**<maximum percentage of Idle cycles*/ + float minIdlePercentage; /**<minimum percentage of Idle cycles*/ + float aveIdlePercentage; /**<average percentage of Idle cycles*/ + UINT32 totalMeasurements; /**<total number of measurement made */ +} IxPerfProfAccXcycleResults; + +/** + * + * @brief Results obtained from running the Bus Pmu component. The results + * are obtained when the get functions is called. + * + */ +typedef struct +{ + UINT32 statsToGetLower27Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Lower 27 Bit of counter value */ + UINT32 statsToGetUpper32Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Upper 32 Bit of counter value */ +} IxPerfProfAccBusPmuResults; + +/* + * Section for enum + */ + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters1 + * + * @brief Type of bus pmu events supported on PEC 1. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_GRANT_SELECT = 1, /**< Select North NPEA grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_GRANT_SELECT, /**< Select North NPEB grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_GRANT_SELECT, /**< Select North NPEC grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_BUS_IDLE_SELECT, /**< Select North bus idle on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_REQ_SELECT, /**< Select North NPEA req on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_REQ_SELECT, /**< Select North NPEB req on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_REQ_SELECT, /**< Select North NPEC req on PEC1*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_GRANT_SELECT, /**< Select south gasket grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_GRANT_SELECT, /**< Select south abb grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_GRANT_SELECT, /**< Select south pci grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_REQ_SELECT, /**< Select south gasket request on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC1*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_4_MISS_SELECT, /**< Select sdram4 miss on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC1*/ + IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_7_MISS_SELECT /**< Select sdram7 miss on PEC1*/ +} IxPerfProfAccBusPmuEventCounters1; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters2 + * + * @brief Type of bus pmu events supported on PEC 2. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_XFER_SELECT = 24, /**< Select North NPEA transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_XFER_SELECT, /**< Select North NPEB transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_XFER_SELECT, /**< Select North NPEC transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_BUS_WRITE_SELECT, /**< Select North bus write on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_OWN_SELECT, /**< Select North NPEA own on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_OWN_SELECT, /**< Select North NPEB own on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_OWN_SELECT, /**< Select North NPEC own on PEC2*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_XFER_SELECT, /**< Select South gasket transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_XFER_SELECT, /**< Select South abb transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_XFER_SELECT, /**< Select South pci transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_XFER_SELECT, /**< Select South apb transfer on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_OWN_SELECT, /**< Select South gasket own on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_OWN_SELECT, /**< Select South abb own on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_OWN_SELECT, /**< Select South pci own on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_OWN_SELECT, /**< Select South apb own transfer on PEC2*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC2*/ + IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_0_MISS_SELECT /**< Select sdram0 miss on PEC2*/ +} IxPerfProfAccBusPmuEventCounters2; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters3 + * + * @brief Type of bus pmu events supported on PEC 3. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_RETRY_SELECT = 47, /**< Select north NPEA retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_BUS_READ_SELECT, /**< Select north bus read on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_WRITE_SELECT, /**< Select north NPEA write on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_WRITE_SELECT, /**< Select north NPEC wirte on PEC3*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_RETRY_SELECT, /**< Select south gasket retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_RETRY_SELECT, /**< Select south apb retry on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_WRITE_SELECT, /**< Select south gasket write on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_WRITE_SELECT, /**< Select south abb write on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_WRITE_SELECT, /**< Select south pci write on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_WRITE_SELECT, /**< Select south apb write on PEC3*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC3*/ + IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_1_MISS_SELECT /**< Select sdram1 miss on PEC3*/ +} IxPerfProfAccBusPmuEventCounters3; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters4 + * + * @brief Type of bus pmu events supported on PEC 4. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_SPLIT_SELECT = 70, /**< Select south pci split on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_XFER_SELECT, /**< Select south apb transfer on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_GSKT_READ_SELECT, /**< Select south gasket read on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_ABB_READ_SELECT, /**< Select south abb read on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_READ_SELECT, /**< Select south pci read on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_READ_SELECT, /**< Select south apb read on PEC4*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_ABB_SPLIT_SELECT, /**< Select north abb split on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_REQ_SELECT, /**< Select north NPEA req on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_READ_SELECT, /**< Select north NPEA read on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC4*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC4*/ + IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_2_MISS_SELECT /**< Select sdram2 miss on PEC4*/ +} IxPerfProfAccBusPmuEventCounters4; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters5 + * + * @brief Type of bus pmu events supported on PEC 5. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_GRANT_SELECT = 91, /**< Select south abb grant on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_XFER_SELECT, /**< Select south abb transfer on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_OWN_SELECT, /**< Select south abb own on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_BUS_IDLE_SELECT, /**< Select south bus idle on PEC5*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_GRANT_SELECT, /**< Select north NPEB grant on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_XFER_SELECT, /**< Select north NPEB transfer on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_REQ_SELECT, /**< Select north NPEB request on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_OWN_SELECT, /**< Select north NPEB own on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC5*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_4_HIT_SELECT, /**< Select north sdram4 hit on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_5_HIT_SELECT, /**< Select north sdram5 hit on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_6_HIT_SELECT, /**< Select north sdram6 hit on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_7_HIT_SELECT, /**< Select north sdram7 hit on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_0_MISS_SELECT, /**< Select north sdram0 miss on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_1_MISS_SELECT, /**< Select north sdram1 miss on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_2_MISS_SELECT, /**< Select north sdram2 miss on PEC5*/ + IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_3_MISS_SELECT /**< Select north sdram3 miss on PEC5*/ +} IxPerfProfAccBusPmuEventCounters5; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters6 + * + * @brief Type of bus pmu events supported on PEC 6. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_GRANT_SELECT = 113, /**< Select south pci grant on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_XFER_SELECT, /**< Select south pci transfer on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_SPLIT_SELECT, /**< Select south pci split on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_OWN_SELECT, /**< Select south pci own on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_BUS_WRITE_SELECT, /**< Select south pci write on PEC6*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_GRANT_SELECT, /**< Select north NPEC grant on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_XFER_SELECT, /**< Select north NPEC transfer on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_REQ_SELECT, /**< Select north NPEC request on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_OWN_SELECT, /**< Select north NPEC own on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC6*/ + + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_7_HIT_SELECT, /**< Select sdram7 hit on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_2_MISS_SELECT, /**< Select sdram2 miss on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_3_MISS_SELECT, /**< Select sdram3 miss on PEC6*/ + IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_4_MISS_SELECT /**< Select sdram4 miss on PEC6*/ +} IxPerfProfAccBusPmuEventCounters6; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuEventCounters7 + * + * @brief Type of bus pmu events supported on PEC 7. + * + * Lists all bus pmu events. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_RETRY_SELECT = 135, /**< Select south apb retry on PEC7*/ + IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC7*/ + IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_OWN_SELECT, /**< Select south apb own on PEC7*/ + IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_BUS_READ_SELECT, /**< Select south bus read on PEC7*/ + IX_PERFPROF_ACC_BUS_PMU_PEC7_CYCLE_COUNT_SELECT /**< Select cycle count on PEC7*/ +} IxPerfProfAccBusPmuEventCounters7; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccXscalePmuEvent + * + * @brief Type of xscale pmu events supported + * + * Lists all xscale pmu events. The maximum is a default value that the user + * should not exceed. + */ +typedef enum +{ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_MISS=0, /**< cache miss*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_INSTRUCTION,/**< cache instruction*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_STALL, /**< event stall*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_TLB_MISS, /**< instruction tlb miss*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_TLB_MISS, /**< data tlb miss*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_EXEC, /**< branch executed*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_MISPREDICT, /**<branch mispredict*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_EXEC, /**< instruction executed*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_FULL_EVERYCYCLE, /**< + *Stall - data cache + *buffers are full. + *This event occurs + *every cycle where + *condition present + */ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_ONCE, /**< + *Stall - data cache buffers are + *full.This event occurs once + *for each contiguous sequence + */ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_ACCESS, /**< data cache access*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_MISS, /**< data cache miss*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_WRITEBACK, /**<data cache + *writeback + */ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_SW_CHANGE_PC, /**< sw change pc*/ + IX_PERFPROF_ACC_XSCALE_PMU_EVENT_MAX /**< max value*/ +} IxPerfProfAccXscalePmuEvent; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccStatus + * + * @brief Invalid Status Definitions + * + * These status will be used by the APIs to return to the user. + */ +typedef enum +{ + IX_PERFPROF_ACC_STATUS_SUCCESS = IX_SUCCESS, /**< success*/ + IX_PERFPROF_ACC_STATUS_FAIL = IX_FAIL, /**< fail*/ + IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS,/**<another utility in + *progress + */ + IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS, /**<measurement in + *progress + */ + IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE, /**<no baseline yet*/ + IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE, /**< + * Measurement chosen + * is out of range + */ + IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL, /**< + * Cannot set + * task priority + */ + IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL, /**< + * Fail create thread + */ + IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL, /**< + *cannot restore + *priority + */ + IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING, /**< xcycle not running*/ + IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID, /**< invalid number + *entered + */ + IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID, /**< invalid pmu event*/ + IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED, /**<a start process + *was not called + *before attempting + *a stop or results + *get + */ + IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR, /**< invalid mode*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR, /**< invalid pec1 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR, /**< invalid pec2 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR, /**< invalid pec3 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR, /**< invalid pec4 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR, /**< invalid pec5 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR, /**< invalid pec6 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR, /**< invalid pec7 entered*/ + IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED, /**<a start process + *was not called + *before attempting + *a stop + */ + IX_PERFPROF_ACC_STATUS_COMPONENT_NOT_SUPPORTED /**<Device or OS does not support component*/ +} IxPerfProfAccStatus; + +/** + * @ingroup IxPerfProfAcc + * + * @enum IxPerfProfAccBusPmuMode + * + * @brief State selection of counters. + * + * These states will be used to determine the counters whose values are to be + * read. + */ +typedef enum +{ + IX_PERFPROF_ACC_BUS_PMU_MODE_HALT=0, /**< halt state*/ + IX_PERFPROF_ACC_BUS_PMU_MODE_SOUTH, /**< south state*/ + IX_PERFPROF_ACC_BUS_PMU_MODE_NORTH, /**< north state*/ + IX_PERFPROF_ACC_BUS_PMU_MODE_SDRAM /**< SDRAM state*/ +} IxPerfProfAccBusPmuMode; + +/* + * Section for prototypes interface functions + */ + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuEventCountStart( + BOOL clkCntDiv, + UINT32 numEvents, + IxPerfProfAccXscalePmuEvent pmuEvent1, + IxPerfProfAccXscalePmuEvent pmuEvent2, + IxPerfProfAccXscalePmuEvent pmuEvent3, + IxPerfProfAccXscalePmuEvent pmuEvent4 ) + * + * @brief This API will start the clock and event counting + * + * @param clkCntDiv BOOL [in] - enables/disables the clock divider. When + * true, the divider is enabled and the clock count will be incremented + * by one at each 64th processor clock cycle. When false, the divider + * is disabled and the clock count will be incremented at every + * processor clock cycle. + * @param numEvents UINT32 [in] - the number of PMU events that are to be + * monitored as specified by the user. For clock counting only, this + * is set to zero. + * @param pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 1 + * @param pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 2 + * @param pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 3 + * @param pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 4 + * + * This API will start the clock and xscale PMU event counting. Up to + * 4 events can be monitored simultaneously. This API has to be called before + * ixPerfProfAccXscalePmuEventCountStop can be called. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are + * started successfully + * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the counting + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events + * specified is out of the valid range + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the PMU + * event specified does not exist + * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is + * running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXscalePmuEventCountStart( + BOOL clkCntDiv, + UINT32 numEvents, + IxPerfProfAccXscalePmuEvent pmuEvent1, + IxPerfProfAccXscalePmuEvent pmuEvent2, + IxPerfProfAccXscalePmuEvent pmuEvent3, + IxPerfProfAccXscalePmuEvent pmuEvent4 ); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuEventCountStop ( + IxPerfProfAccXscalePmuResults *eventCountStopResults) + * + * @brief This API will stop the clock and event counting + * + * @param *eventCountStopResults @ref IxPerfProfAccXscalePmuResults [out] - pointer + * to struct containing results of counters and their overflow. It is the + * users's responsibility to allocate the memory for this pointer. + * + * This API will stop the clock and xscale PMU events that are being counted. + * The results of the clock and events count will be stored in the pointer + * allocated by the user. It can only be called once + * IxPerfProfAccEventCountStart has been called. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are + * stopped successfully + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if + * ixPerfProfAccXscalePmuEventCountStart is not called first. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ + +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXscalePmuEventCountStop( + IxPerfProfAccXscalePmuResults *eventCountStopResults); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuTimeSampStart( + UINT32 samplingRate, + BOOL clkCntDiv) + * + * @brief Starts the time based sampling + * + * @param samplingRate UINT32 [in] - sampling rate is the number of + * clock counts before a counter overflow interrupt is generated, + * at which, a sample is taken; the rate specified cannot be greater + * than the counter size of 32bits or set to zero. + * @param clkCntDiv BOOL [in] - enables/disables the clock divider. When + * true, the divider is enabled and the clock count will be incremented + * by one at each 64th processor clock cycle. When false, the divider + * is disabled and the clock count will be incremented at every + * processor clock cycle. + * + * This API starts the time based sampling to determine the frequency with + * which lines of code are being executed. Sampling is done at the rate + * specified by the user. At each sample,the value of the program counter + * is determined. Each of these occurrences are recorded to determine the + * frequency with which the Xscale code is being executed. This API has to be + * called before ixPerfProfAccXscalePmuTimeSampStop can be called. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is started + * successfully + * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling + * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is + * running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXscalePmuTimeSampStart( + UINT32 samplingRate, + BOOL clkCntDiv); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuTimeSampStop( + IxPerfProfAccXscalePmuEvtCnt *clkCount, + IxPerfProfAccXscalePmuSamplePcProfile *timeProfile) + * + * @brief Stops the time based sampling + * + * @param *clkCount @ref IxPerfProfAccXscalePmuEvtCnt [out] - pointer to the + * struct containing the final clock count and its overflow. It is the + * user's responsibility to allocate the memory for this pointer. + * @param *timeProfile @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - + * pointer to the array of profiles for each program counter value; + * the user should set the size of the array to + * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the user's + * responsibility to allocate the memory for this pointer. + * + * This API stops the time based sampling. The results are stored in the + * pointers allocated by the user. It can only be called once + * ixPerfProfAccXscalePmuTimeSampStart has been called. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is stopped + * successfully + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if + * ixPerfProfAccXscalePmuTimeSampStart not called first + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXscalePmuTimeSampStop( + IxPerfProfAccXscalePmuEvtCnt *clkCount, + IxPerfProfAccXscalePmuSamplePcProfile *timeProfile); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuEventSampStart( + UINT32 numEvents, + IxPerfProfAccXscalePmuEvent pmuEvent1, + UINT32 eventRate1, + IxPerfProfAccXscalePmuEvent pmuEvent2, + UINT32 eventRate2, + IxPerfProfAccXscalePmuEvent pmuEvent3, + UINT32 eventRate3, + IxPerfProfAccXscalePmuEvent pmuEvent4, + UINT32 eventRate4) + * + * @brief Starts the event based sampling + * + * @param numEvents UINT32 [in] - the number of PMU events that are + * to be monitored as specified by the user. The value should be + * between 1-4 events at a time. + * @param pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 1 + * @param eventRate1 UINT32 [in] - sampling rate of counter 1. The rate is + * the number of events before a sample taken. If 0 is specified, the + * the full counter value (0xFFFFFFFF) is used. The rate must not be + * greater than the full counter value. + * @param pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 2 + * @param eventRate2 UINT32 [in] - sampling rate of counter 2. The rate is + * the number of events before a sample taken. If 0 is specified, the + * full counter value (0xFFFFFFFF) is used. The rate must not be + * greater than the full counter value. + * @param pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 3 + * @param eventRate3 UINT32 [in] - sampling rate of counter 3. The rate is + * the number of events before a sample taken. If 0 is specified, the + * full counter value (0xFFFFFFFF) is used. The rate must not be + * greater than the full counter value. + * @param pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU + * event to be monitored by counter 4 + * @param eventRate4 UINT32 [in] - sampling rate of counter 4. The rate is + * the number of events before a sample taken. If 0 is specified, the + * full counter value (0xFFFFFFFF) is used. The rate must not be + * greater than the full counter value. + * + * Starts the event based sampling to determine the frequency with + * which events are being executed. The sampling rate is the number of events, + * as specified by the user, before a counter overflow interrupt is + * generated. A sample is taken at each counter overflow interrupt. At each + * sample,the value of the program counter determines the corresponding + * location in the code. Each of these occurrences are recorded to determine + * the frequency with which the Xscale code in each event is executed. This API + * has to be called before ixPerfProfAccXscalePmuEventSampStop can be called. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is started + * successfully + * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events + * specified is out of the valid range + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the + * PMU event specified does not exist + * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is + * running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXscalePmuEventSampStart( + UINT32 numEvents, + IxPerfProfAccXscalePmuEvent pmuEvent1, + UINT32 eventRate1, + IxPerfProfAccXscalePmuEvent pmuEvent2, + UINT32 eventRate2, + IxPerfProfAccXscalePmuEvent pmuEvent3, + UINT32 eventRate3, + IxPerfProfAccXscalePmuEvent pmuEvent4, + UINT32 eventRate4); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuEventSampStop( + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1, + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2, + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3, + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4) + * + * @brief Stops the event based sampling + * + * @param *eventProfile1 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - + * pointer to the array of profiles for each program counter value; + * the user should set the size of the array to + * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the + * users's responsibility to allocate memory for this pointer. + * @param *eventProfile2 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - + * pointer to the array of profiles for each program counter value; + * the user should set the size of the array to + * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the + * users's responsibility to allocate memory for this pointer. + * @param *eventProfile3 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - + * pointer to the array of profiles for each program counter value; + * the user should set the size of the array to + * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the + * users's responsibility to allocate memory for this pointer. + * @param *eventProfile4 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - + * pointer to the array of profiles for each program counter value; + * the user should set the size of the array to + * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the + * users's responsibility to allocate memory for this pointer. + * + * This API stops the event based sampling. The results are stored in the + * pointers allocated by the user. It can only be called once + * ixPerfProfAccEventSampStart has been called. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is stopped + * successfully + * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if + * ixPerfProfAccEventSampStart not called first. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXscalePmuEventSampStop( + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1, + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2, + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3, + IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results) + * + * @brief Reads the current value of the counters and their overflow + * + * @param *results @ref IxPerfProfAccXscalePmuResults [out] - pointer to the + results struct. It is the user's responsibility to allocate memory + for this pointer + * + * This API reads the value of all four event counters and the clock counter, + * and the associated overflows. It does not give results associated with + * sampling, i.e. PC and their frequencies. This API can be called at any time + * once a process has been started. If it is called before a process has started + * the user should be aware that the values it contains are default values and + * might be meaningless. The values of the counters are stored in the pointer + * allocated by the client. + * + * @return - none + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC void +ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccBusPmuStart( + IxPerfProfAccBusPmuMode mode, + IxPerfProfAccBusPmuEventCounters1 pecEvent1, + IxPerfProfAccBusPmuEventCounters2 pecEvent2, + IxPerfProfAccBusPmuEventCounters3 pecEvent3, + IxPerfProfAccBusPmuEventCounters4 pecEvent4, + IxPerfProfAccBusPmuEventCounters5 pecEvent5, + IxPerfProfAccBusPmuEventCounters6 pecEvent6, + IxPerfProfAccBusPmuEventCounters7 pecEvent7) + * @brief Initializes all the counters and selects events to be monitored. + * + * Function initializes all the counters and assigns the events associated + * with the counters. Users send in the mode and events they want to count. + * This API verifies if the combination chosen is appropriate + * and sets all the registers accordingly. Selecting HALT mode will result + * in an error. User should use ixPerfProfAccBusPmuStop() to HALT. + * + * + * @param mode @ref IxPerfProfAccStateBusPmuMode [in] - Mode selection. + * @param pecEvent1 @ref IxPerfProfAccBusPmuEventCounters1 [in] - Event for PEC1. + * @param pecEvent2 @ref IxPerfProfAccBusPmuEventCounters2 [in] - Event for PEC2. + * @param pecEvent3 @ref IxPerfProfAccBusPmuEventCounters3 [in] - Event for PEC3. + * @param pecEvent4 @ref IxPerfProfAccBusPmuEventCounters4 [in] - Event for PEC4. + * @param pecEvent5 @ref IxPerfProfAccBusPmuEventCounters5 [in] - Event for PEC5. + * @param pecEvent6 @ref IxPerfProfAccBusPmuEventCounters6 [in] - Event for PEC6. + * @param pecEvent7 @ref IxPerfProfAccBusPmuEventCounters7 [in] - Event for PEC7. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS - Initialization executed + * successfully. + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR - Error in selection of + * mode. Only NORTH, SOUTH and SDRAM modes are allowed. + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR - Error in selection of + * event for PEC1 + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR - Error in selection of + * event for PEC2 + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR - Error in selection of + * event for PEC3 + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR - Error in selection of + * event for PEC4 + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR - Error in selection of + * event for PEC5 + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR - Error in selection of + * event for PEC6 + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR - Error in selection of + * event for PEC7 + * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility + * is running + * - IX_PERFPROF_ACC_STATUS_FAIL - Failed to start because interrupt + * service routine fails to bind. + * + * @li Reentrant : no + * @li ISR Callable : no + * + **/ +PUBLIC +IxPerfProfAccStatus ixPerfProfAccBusPmuStart ( + IxPerfProfAccBusPmuMode mode, + IxPerfProfAccBusPmuEventCounters1 pecEvent1, + IxPerfProfAccBusPmuEventCounters2 pecEvent2, + IxPerfProfAccBusPmuEventCounters3 pecEvent3, + IxPerfProfAccBusPmuEventCounters4 pecEvent4, + IxPerfProfAccBusPmuEventCounters5 pecEvent5, + IxPerfProfAccBusPmuEventCounters6 pecEvent6, + IxPerfProfAccBusPmuEventCounters7 pecEvent7); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccBusPmuStop(void) + * @brief Stops all counters. + * + * This function stops all the PECs by setting the halt bit in the ESR. + * + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS - Counters successfully halted. + * - IX_PERFPROF_ACC_STATUS_FAIL - Counters could'nt be halted. + * - IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED - the + * ixPerfProfAccBusPmuStart() function is not called. + * + * @li Reentrant : no + * @li ISR Callable : no + * + **/ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccBusPmuStop (void); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccBusPmuResultsGet ( + IxPerfProfAccBusPmuResults *busPmuResults) + * @brief Gets values of all counters + * + * This function is responsible for getting all the counter values from the + * lower API and putting it into an array for the user. + * + * @param *busPmuResults @ref IxPerfProfAccBusPmuResults [out] + * - Pointer to a structure of arrays to store all counter values. + * + * @return none + * + * @li Reentrant : no + * @li ISR Callable : no + * + **/ +PUBLIC void +ixPerfProfAccBusPmuResultsGet (IxPerfProfAccBusPmuResults *BusPmuResults); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccBusPmuPMSRGet ( + UINT32 *pmsrValue) + * @brief Get values of PMSR + * + * This API gets the Previous Master Slave Register + * value and returns it to the calling function. This value indicates + * which master or slave accessed the north, south bus or sdram last. + * The value returned by this function is a 32 bit value and is read + * from location of an offset 0x0024 of the base value. + * + * The PMSR value returned indicate the following: + * <pre> + * + * ************************************************************************************* + * * Bit * Name * Description * + * * * + * ************************************************************************************* + * * [31:18] *Reserved* * + * ************************************************************************************* + * * [17:12] * PSS * Indicates which of the slaves on * + * * * * ARBS was previously * + * * * * accessed by the AHBS. * + * * * * [000001] Expansion Bus * + * * * * [000010] SDRAM Controller * + * * * * [000100] PCI * + * * * * [001000] Queue Manager * + * * * * [010000] AHB-APB Bridge * + * * * * [100000] Reserved * + * ************************************************************************************* + * * [11:8] * PSN * Indicates which of the Slaves on * + * * * * ARBN was previously * + * * * * accessed the AHBN. * + * * * * [0001] SDRAM Controller * + * * * * [0010] AHB-AHB Bridge * + * * * * [0100] Reserved * + * * * * [1000] Reserved * + * ************************************************************************************* + * * [7:4] * PMS * Indicates which of the Masters on * + * * * * ARBS was previously * + * * * * accessing the AHBS. * + * * * * [0001] Gasket * + * * * * [0010] AHB-AHB Bridge * + * * * * [0100] PCI * + * * * * [1000] APB * + * ************************************************************************************* + * * [3:0] * PMN * Indicates which of the Masters on * + * * * * ARBN was previously * + * * * * accessing the AHBN. * + * * * * [0001] NPEA * + * * * * [0010] NPEB * + * * * * [0100] NPEC * + * * * * [1000] Reserved * + * ************************************************************************************* + * </pre> + * + * @param *pmsrValue UINT32 [out] - Pointer to return PMSR value. Users need to + * allocate storage for psmrValue. + * + * @return none + * + * @li Reentrant : no + * @li ISR Callable : no + * + **/ +PUBLIC void +ixPerfProfAccBusPmuPMSRGet ( +UINT32 *pmsrValue); + + +/** + * The APIs below are specifically used for Xcycle module. + **/ + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXcycleBaselineRun ( + UINT32 *numBaselineCycle) + * + * @brief Perform baseline for Xcycle + * + * @param *numBaselineCycle UINT32 [out] - pointer to baseline value after + * calibration. Calling function are responsible for + * allocating memory space for this pointer. + * + * Global Data : + * - None. + * + * This function MUST be run before the Xcycle tool can be used. This + * function must be run immediately when the OS boots up with no other + * addition programs running. + * Addition note : This API will measure the time needed to perform + * a fix amount of CPU instructions (~ 1 second worth of loops) as a + * highest priority task and with interrupt disabled. The time measured + * is known as the baseline - interpreted as the shortest time + * needed to complete the amount of CPU instructions. The baseline is + * returned as unit of time in 66Mhz clock tick. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful run, result is returned + * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to change + * task priority + * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL - failed to + * restore task priority + * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility + * is running + * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle + * tool has already started + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXcycleBaselineRun( + UINT32 *numBaselineCycle); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXcycleStart( + UINT32 numMeasurementsRequested); + * + * @brief Start the measurement + * + * @param numMeasurementsRequested UINT32 [in] - number of measurements + * to perform. Value can be 0 to + * IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. + * 0 indicate continuous measurement. + * + * Global Data : + * - None. + * + * + * Start the measurements immediately. + * numMeasurementsRequested specifies number of measurements to run. + * If numMeasurementsRequested is set to 0, the measurement will + * be performed continuously until IxPerfProfAccXcycleStop() + * is called. + * It is estimated that 1 measurement takes approximately 1 second during + * low CPU utilization, therefore 128 measurement takes approximately 128 sec. + * When CPU utilization is high, the measurement will take longer. + * This function spawn a task the perform the measurement and returns. + * The measurement may continue even if this function returns. + * + * IMPORTANT: Under heavy CPU utilization, the task spawn by this + * function may starve and fail to respond to stop command. User + * may need to kill the task manually in this case. + * + * There are only IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS + * storage available so storing is wrapped around if measurements are + * more than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. + * + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful start, a thread is created + * in the background to perform measurement. + * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to set + * task priority + * - IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL - failed to create + * thread to perform measurement. + * - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is not available + * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE - + * value is larger than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS + * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle tool + * has already started + * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is + * running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXcycleStart ( + UINT32 numMeasurementsRequested); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXcycleStop(void); + * + * @brief Stop the Xcycle measurement + * + * @param None + * + * Global Data : + * - None. + * + * Stop Xcycle measurements immediately. If the measurements have stopped + * or not started, return IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING. + * Note: This function does not stop measurement cold. The measurement thread + * may need a few seconds to complete the last measurement. User needs to use + * ixPerfProfAccXcycleInProgress() to determine if measurement is indeed + * completed. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful measurement is stopped + * - IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING - no measurement running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXcycleStop(void); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXcycleResultsGet( + IxPerfProfAccXcycleResults *xcycleResult ) + * + * @brief Get the results of Xcycle measurement + * + * @param *xcycleResult @ref IxPerfProfAccXcycleResults [out] - Pointer to + * results of last measurements. Calling function are + * responsible for allocating memory space for this pointer. + * + * Global Data : + * - None. + * + * Retrieve the results of last measurement. User should use + * ixPerfProfAccXcycleInProgress() to check if measurement is completed + * before getting the results. + * + * @return + * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful + * - IX_PERFPROF_ACC_STATUS_FAIL - result is not complete. + * - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is performed + * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle + * tool is still running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC IxPerfProfAccStatus +ixPerfProfAccXcycleResultsGet ( + IxPerfProfAccXcycleResults *xcycleResult); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXcycleInProgress (void) + * + * @brief Check if Xcycle is running + * + * @param None + * Global Data : + * - None. + * + * Check if Xcycle measuring task is running. + * + * @return + * - TRUE - Xcycle is running + * - FALSE - Xcycle is not running + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +PUBLIC BOOL +ixPerfProfAccXcycleInProgress(void); + +#ifdef __linux +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuTimeSampCreateProcFile + * + * @brief Enables proc file to call module function + * + * @param None + * + * Global Data : + * - None. + * + * This function is declared globally to enable /proc directory system to call + * and execute the function when the registered file is called. This function is not meant to + * be called by the user. + * + * @return + * - Length of data written to file. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +int +ixPerfProfAccXscalePmuTimeSampCreateProcFile (char *buf, char **start, off_t offset, + int count, int *eof, void *data); + +/** + * @ingroup IxPerfProfAcc + * + * @fn ixPerfProfAccXscalePmuEventSampCreateProcFile + * + * @brief Enables proc file to call module function + * + * @param None + * + * Global Data : + * - None. + * + * This function is declared globally to enable /proc directory system to call + * and execute the function when the registered file is called. This function is not meant to + * be called by the user. + * + * @return + * - Length of data written to file. + * + * @li Reentrant : no + * @li ISR Callable : no + * + */ +int +ixPerfProfAccXscalePmuEventSampCreateProcFile (char *buf, char **start, off_t offset, + int count, int *eof, void *data); + + +#endif /* ifdef __linux */ + +#endif /* ndef IXPERFPROFACC_H */ + +/** + *@} defgroup IxPerfProfAcc + */ + + diff --git a/drivers/net/npe/include/IxQMgr.h b/drivers/net/npe/include/IxQMgr.h new file mode 100644 index 0000000000..03d7e07092 --- /dev/null +++ b/drivers/net/npe/include/IxQMgr.h @@ -0,0 +1,2210 @@ +/** + * @file IxQMgr.h + * + * @date 30-Oct-2001 + * + * @brief This file contains the public API of IxQMgr component. + * + * Some functions contained in this module are inline to achieve better + * data-path performance. For this to work, the function definitions are + * contained in this header file. The "normal" use of inline functions + * is to use the inline functions in the module in which they are + * defined. In this case these inline functions are used in external + * modules and therefore the use of "inline extern". What this means + * is as follows: if a function foo is declared as "inline extern" this + * definition is only used for inlining, in no case is the function + * compiled on its own. If the compiler cannot inline the function it + * becomes an external reference. Therefore in IxQMgrQAccess.c all + * inline functions are defined without the "inline extern" specifier + * and so define the external references. In all other source files + * including this header file, these funtions are defined as "inline + * extern". + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/* ------------------------------------------------------ + Doxygen group definitions + ------------------------------------------------------ */ +/** + * @defgroup IxQMgrAPI IXP400 Queue Manager (IxQMgr) API + * + * @brief The public API for the IXP400 QMgr component. + * + * IxQMgr is a low level interface to the AHB Queue Manager + * + * @{ + */ + +#ifndef IXQMGR_H +#define IXQMGR_H + +/* + * User defined include files + */ + +#include "IxOsal.h" + +/* + * Define QMgr's IoMem macros, in DC mode if in LE + * regular if in BE. (Note: For Linux LSP gold release + * may need to adjust mode. + */ +#if defined (__BIG_ENDIAN) + +#define IX_QMGR_INLINE_READ_LONG IX_OSAL_READ_LONG_BE +#define IX_QMGR_INLINE_WRITE_LONG IX_OSAL_WRITE_LONG_BE + +#else + +#define IX_QMGR_INLINE_READ_LONG IX_OSAL_READ_LONG_LE_DC +#define IX_QMGR_INLINE_WRITE_LONG IX_OSAL_WRITE_LONG_LE_DC + +#endif + +/* + * #defines and macros + */ + +/** +* +* @ingroup IxQMgrAPI +* +* @def IX_QMGR_INLINE +* +* @brief Inline definition, for inlining of Queue Access functions on API +* +* Please read the header information in this file for more details on the +* use of function inlining in this component. +* +*/ + +#ifndef __wince + +#ifdef IXQMGRQACCESS_C +/* If IXQMGRQACCESS_C is set then the IxQmgrQAccess.c is including this file + and must instantiate a concrete definition for each inlineable API function + whether or not that function actually gets inlined. */ +# ifdef NO_INLINE_APIS +# undef NO_INLINE_APIS +# endif +# define IX_QMGR_INLINE /* Empty Define */ +#else +# ifndef NO_INLINE_APIS +# define IX_QMGR_INLINE IX_OSAL_INLINE_EXTERN +# else +# define IX_QMGR_INLINE /* Empty Define */ +# endif +#endif + +#else /* ndef __wince */ + +# ifndef NO_INLINE_APIS +# define NO_INLINE_APIS +# endif +# define IX_QMGR_INLINE + +#endif + + +/** +* +* @ingroup IxQMgrAPI +* +* @def IX_QMGR_MAX_NUM_QUEUES +* +* @brief Number of queues supported by the AQM. +* +* This constant is used to indicate the number of AQM queues +* +*/ +#define IX_QMGR_MAX_NUM_QUEUES 64 + +/** +* +* @ingroup IxQMgrAPI +* +* @def IX_QMGR_MIN_QID +* +* @brief Minimum queue identifier. +* +* This constant is used to indicate the smallest queue identifier +* +*/ +#define IX_QMGR_MIN_QID IX_QMGR_QUEUE_0 + +/** +* +* @ingroup IxQMgrAPI +* +* @def IX_QMGR_MAX_QID +* +* @brief Maximum queue identifier. +* +* This constant is used to indicate the largest queue identifier +* +*/ +#define IX_QMGR_MAX_QID IX_QMGR_QUEUE_63 + +/** +* +* @ingroup IxQMgrAPI +* +* @def IX_QMGR_MIN_QUEUPP_QID +* +* @brief Minimum queue identifier for reduced functionality queues. +* +* This constant is used to indicate Minimum queue identifier for reduced +* functionality queues +* +*/ +#define IX_QMGR_MIN_QUEUPP_QID 32 + +/** +* +* @ingroup IxQMgrAPI +* +* @def IX_QMGR_MAX_QNAME_LEN +* +* @brief Maximum queue name length. +* +* This constant is used to indicate the maximum null terminated string length +* (excluding '\0') for a queue name +* +*/ +#define IX_QMGR_MAX_QNAME_LEN 16 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_WARNING + * + * @brief Warning return code. + * + * Execution complete, but there is a special case to handle + * + */ +#define IX_QMGR_WARNING 2 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_PARAMETER_ERROR + * + * @brief Parameter error return code (NULL pointer etc..). + * + * parameter error out of range/invalid + * + */ +#define IX_QMGR_PARAMETER_ERROR 3 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_INVALID_Q_ENTRY_SIZE + * + * @brief Invalid entry size return code. + * + * Invalid queue entry size for a queue read/write + * + */ +#define IX_QMGR_INVALID_Q_ENTRY_SIZE 4 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_INVALID_Q_ID + * + * @brief Invalid queue identifier return code. + * + * Invalid queue id, not in range 0-63 + * + */ +#define IX_QMGR_INVALID_Q_ID 5 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_INVALID_CB_ID + * + * @brief Invalid callback identifier return code. + * + * Invalid callback id + */ +#define IX_QMGR_INVALID_CB_ID 6 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_CB_ALREADY_SET + * + * @brief Callback set error return code. + * + * The specified callback has already been for this queue + * + */ +#define IX_QMGR_CB_ALREADY_SET 7 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_NO_AVAILABLE_SRAM + * + * @brief Sram consumed return code. + * + * All AQM Sram is consumed by queue configuration + * + */ +#define IX_QMGR_NO_AVAILABLE_SRAM 8 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_INVALID_INT_SOURCE_ID + * + * @brief Invalid queue interrupt source identifier return code. + * + * Invalid queue interrupt source given for notification enable + */ +#define IX_QMGR_INVALID_INT_SOURCE_ID 9 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_INVALID_QSIZE + * + * @brief Invalid queue size error code. + * + * Invalid queue size not one of 16,32, 64, 128 + * + * + */ +#define IX_QMGR_INVALID_QSIZE 10 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_INVALID_Q_WM + * + * @brief Invalid queue watermark return code. + * + * Invalid queue watermark given for watermark set + */ +#define IX_QMGR_INVALID_Q_WM 11 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_Q_NOT_CONFIGURED + * + * @brief Queue not configured return code. + * + * Returned to the client when a function has been called on an unconfigured + * queue + * + */ +#define IX_QMGR_Q_NOT_CONFIGURED 12 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_Q_ALREADY_CONFIGURED + * + * @brief Queue already configured return code. + * + * Returned to client to indicate that a queue has already been configured + */ +#define IX_QMGR_Q_ALREADY_CONFIGURED 13 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_Q_UNDERFLOW + * + * @brief Underflow return code. + * + * Underflow on a queue read has occurred + * + */ +#define IX_QMGR_Q_UNDERFLOW 14 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_Q_OVERFLOW + * + * @brief Overflow return code. + * + * Overflow on a queue write has occurred + * + */ +#define IX_QMGR_Q_OVERFLOW 15 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_Q_INVALID_PRIORITY + * + * @brief Invalid priority return code. + * + * Invalid priority, not one of 0,1,2 + */ +#define IX_QMGR_Q_INVALID_PRIORITY 16 + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS + * + * @brief Entry index out of bounds return code. + * + * Entry index is greater than number of entries in queue. + */ +#define IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS 17 + +/** + * + * @ingroup IxQMgrAPI + * + * @def ixQMgrDispatcherLoopRun + * + * @brief Map old function name ixQMgrDispatcherLoopRun () + * to @ref ixQMgrDispatcherLoopRunA0 (). + * + */ +#define ixQMgrDispatcherLoopRun ixQMgrDispatcherLoopRunA0 + + +/** + * + * @ingroup IxQMgrAPI + * + * @def IX_QMGR_QUEUE + * + * @brief Definition of AQM queue numbers + * + */ +#define IX_QMGR_QUEUE_0 (0) /**< Queue Number 0 */ +#define IX_QMGR_QUEUE_1 (1) /**< Queue Number 1 */ +#define IX_QMGR_QUEUE_2 (2) /**< Queue Number 2 */ +#define IX_QMGR_QUEUE_3 (3) /**< Queue Number 3 */ +#define IX_QMGR_QUEUE_4 (4) /**< Queue Number 4 */ +#define IX_QMGR_QUEUE_5 (5) /**< Queue Number 5 */ +#define IX_QMGR_QUEUE_6 (6) /**< Queue Number 6 */ +#define IX_QMGR_QUEUE_7 (7) /**< Queue Number 7 */ +#define IX_QMGR_QUEUE_8 (8) /**< Queue Number 8 */ +#define IX_QMGR_QUEUE_9 (9) /**< Queue Number 9 */ +#define IX_QMGR_QUEUE_10 (10) /**< Queue Number 10 */ +#define IX_QMGR_QUEUE_11 (11) /**< Queue Number 11 */ +#define IX_QMGR_QUEUE_12 (12) /**< Queue Number 12 */ +#define IX_QMGR_QUEUE_13 (13) /**< Queue Number 13 */ +#define IX_QMGR_QUEUE_14 (14) /**< Queue Number 14 */ +#define IX_QMGR_QUEUE_15 (15) /**< Queue Number 15 */ +#define IX_QMGR_QUEUE_16 (16) /**< Queue Number 16 */ +#define IX_QMGR_QUEUE_17 (17) /**< Queue Number 17 */ +#define IX_QMGR_QUEUE_18 (18) /**< Queue Number 18 */ +#define IX_QMGR_QUEUE_19 (19) /**< Queue Number 19 */ +#define IX_QMGR_QUEUE_20 (20) /**< Queue Number 20 */ +#define IX_QMGR_QUEUE_21 (21) /**< Queue Number 21 */ +#define IX_QMGR_QUEUE_22 (22) /**< Queue Number 22 */ +#define IX_QMGR_QUEUE_23 (23) /**< Queue Number 23 */ +#define IX_QMGR_QUEUE_24 (24) /**< Queue Number 24 */ +#define IX_QMGR_QUEUE_25 (25) /**< Queue Number 25 */ +#define IX_QMGR_QUEUE_26 (26) /**< Queue Number 26 */ +#define IX_QMGR_QUEUE_27 (27) /**< Queue Number 27 */ +#define IX_QMGR_QUEUE_28 (28) /**< Queue Number 28 */ +#define IX_QMGR_QUEUE_29 (29) /**< Queue Number 29 */ +#define IX_QMGR_QUEUE_30 (30) /**< Queue Number 30 */ +#define IX_QMGR_QUEUE_31 (31) /**< Queue Number 31 */ +#define IX_QMGR_QUEUE_32 (32) /**< Queue Number 32 */ +#define IX_QMGR_QUEUE_33 (33) /**< Queue Number 33 */ +#define IX_QMGR_QUEUE_34 (34) /**< Queue Number 34 */ +#define IX_QMGR_QUEUE_35 (35) /**< Queue Number 35 */ +#define IX_QMGR_QUEUE_36 (36) /**< Queue Number 36 */ +#define IX_QMGR_QUEUE_37 (37) /**< Queue Number 37 */ +#define IX_QMGR_QUEUE_38 (38) /**< Queue Number 38 */ +#define IX_QMGR_QUEUE_39 (39) /**< Queue Number 39 */ +#define IX_QMGR_QUEUE_40 (40) /**< Queue Number 40 */ +#define IX_QMGR_QUEUE_41 (41) /**< Queue Number 41 */ +#define IX_QMGR_QUEUE_42 (42) /**< Queue Number 42 */ +#define IX_QMGR_QUEUE_43 (43) /**< Queue Number 43 */ +#define IX_QMGR_QUEUE_44 (44) /**< Queue Number 44 */ +#define IX_QMGR_QUEUE_45 (45) /**< Queue Number 45 */ +#define IX_QMGR_QUEUE_46 (46) /**< Queue Number 46 */ +#define IX_QMGR_QUEUE_47 (47) /**< Queue Number 47 */ +#define IX_QMGR_QUEUE_48 (48) /**< Queue Number 48 */ +#define IX_QMGR_QUEUE_49 (49) /**< Queue Number 49 */ +#define IX_QMGR_QUEUE_50 (50) /**< Queue Number 50 */ +#define IX_QMGR_QUEUE_51 (51) /**< Queue Number 51 */ +#define IX_QMGR_QUEUE_52 (52) /**< Queue Number 52 */ +#define IX_QMGR_QUEUE_53 (53) /**< Queue Number 53 */ +#define IX_QMGR_QUEUE_54 (54) /**< Queue Number 54 */ +#define IX_QMGR_QUEUE_55 (55) /**< Queue Number 55 */ +#define IX_QMGR_QUEUE_56 (56) /**< Queue Number 56 */ +#define IX_QMGR_QUEUE_57 (57) /**< Queue Number 57 */ +#define IX_QMGR_QUEUE_58 (58) /**< Queue Number 58 */ +#define IX_QMGR_QUEUE_59 (59) /**< Queue Number 59 */ +#define IX_QMGR_QUEUE_60 (60) /**< Queue Number 60 */ +#define IX_QMGR_QUEUE_61 (61) /**< Queue Number 61 */ +#define IX_QMGR_QUEUE_62 (62) /**< Queue Number 62 */ +#define IX_QMGR_QUEUE_63 (63) /**< Queue Number 63 */ +#define IX_QMGR_QUEUE_INVALID (64) /**< AQM Queue Number Delimiter */ + + +/* + * Typedefs + */ + +/** + * @typedef IxQMgrQId + * + * @ingroup IxQMgrAPI + * + * @brief Used in the API to identify the AQM queues. + * + */ +typedef int IxQMgrQId; + +/** + * @typedef IxQMgrQStatus + * + * @ingroup IxQMgrAPI + * + * @brief Queue status. + * + * A queues status is defined by its relative fullness or relative emptiness. + * Each of the queues 0-31 have Nearly Empty, Nearly Full, Empty, Full, + * Underflow and Overflow status flags. Queues 32-63 have just Nearly Empty and + * Full status flags. + * The flags bit positions are outlined below: + * + * OF - bit-5<br> + * UF - bit-4<br> + * F - bit-3<br> + * NF - bit-2<br> + * NE - bit-1<br> + * E - bit-0<br> + * + */ +typedef UINT32 IxQMgrQStatus; + +/** + * @enum IxQMgrQStatusMask + * + * @ingroup IxQMgrAPI + * + * @brief Queue status mask. + * + * Masks for extracting the individual status flags from the IxQMgrStatus + * word. + * + */ +typedef enum +{ + IX_QMGR_Q_STATUS_E_BIT_MASK = 0x1, + IX_QMGR_Q_STATUS_NE_BIT_MASK = 0x2, + IX_QMGR_Q_STATUS_NF_BIT_MASK = 0x4, + IX_QMGR_Q_STATUS_F_BIT_MASK = 0x8, + IX_QMGR_Q_STATUS_UF_BIT_MASK = 0x10, + IX_QMGR_Q_STATUS_OF_BIT_MASK = 0x20 +} IxQMgrQStatusMask; + +/** + * @enum IxQMgrSourceId + * + * @ingroup IxQMgrAPI + * + * @brief Queue interrupt source select. + * + * This enum defines the different source conditions on a queue that result in + * an interrupt being fired by the AQM. Interrupt source is configurable for + * queues 0-31 only. The interrupt source for queues 32-63 is hardwired to the + * NE(Nearly Empty) status flag. + * + */ +typedef enum +{ + IX_QMGR_Q_SOURCE_ID_E = 0, /**< Queue Empty due to last read */ + IX_QMGR_Q_SOURCE_ID_NE, /**< Queue Nearly Empty due to last read */ + IX_QMGR_Q_SOURCE_ID_NF, /**< Queue Nearly Full due to last write */ + IX_QMGR_Q_SOURCE_ID_F, /**< Queue Full due to last write */ + IX_QMGR_Q_SOURCE_ID_NOT_E, /**< Queue Not Empty due to last write */ + IX_QMGR_Q_SOURCE_ID_NOT_NE, /**< Queue Not Nearly Empty due to last write */ + IX_QMGR_Q_SOURCE_ID_NOT_NF, /**< Queue Not Nearly Full due to last read */ + IX_QMGR_Q_SOURCE_ID_NOT_F /**< Queue Not Full due to last read */ +} IxQMgrSourceId; + +/** + * @enum IxQMgrQEntrySizeInWords + * + * @ingroup IxQMgrAPI + * + * @brief QMgr queue entry sizes. + * + * The entry size of a queue specifies the size of a queues entry in words. + * + */ +typedef enum +{ + IX_QMGR_Q_ENTRY_SIZE1 = 1, /**< 1 word entry */ + IX_QMGR_Q_ENTRY_SIZE2 = 2, /**< 2 word entry */ + IX_QMGR_Q_ENTRY_SIZE4 = 4 /**< 4 word entry */ +} IxQMgrQEntrySizeInWords; + +/** + * @enum IxQMgrQSizeInWords + * + * @ingroup IxQMgrAPI + * + * @brief QMgr queue sizes. + * + * These values define the allowed queue sizes for AQM queue. The sizes are + * specified in words. + * + */ +typedef enum +{ + IX_QMGR_Q_SIZE16 = 16, /**< 16 word buffer */ + IX_QMGR_Q_SIZE32 = 32, /**< 32 word buffer */ + IX_QMGR_Q_SIZE64 = 64, /**< 64 word buffer */ + IX_QMGR_Q_SIZE128 = 128, /**< 128 word buffer */ + IX_QMGR_Q_SIZE_INVALID = 129 /**< Insure that this is greater than largest + * queue size supported by the hardware + */ +} IxQMgrQSizeInWords; + +/** + * @enum IxQMgrWMLevel + * + * @ingroup IxQMgrAPI + * + * @brief QMgr watermark levels. + * + * These values define the valid watermark levels(in ENTRIES) for queues. Each + * queue 0-63 have configurable Nearly full and Nearly empty watermarks. For + * queues 32-63 the Nearly full watermark has NO EFFECT. + * If the Nearly full watermark is set to IX_QMGR_Q_WM_LEVEL16 this means that + * the nearly full flag will be set by the hardware when there are >= 16 empty + * entries in the specified queue. + * If the Nearly empty watermark is set to IX_QMGR_Q_WM_LEVEL16 this means that + * the Nearly empty flag will be set by the hardware when there are <= 16 full + * entries in the specified queue. + */ +typedef enum +{ + IX_QMGR_Q_WM_LEVEL0 = 0, /**< 0 entry watermark */ + IX_QMGR_Q_WM_LEVEL1 = 1, /**< 1 entry watermark */ + IX_QMGR_Q_WM_LEVEL2 = 2, /**< 2 entry watermark */ + IX_QMGR_Q_WM_LEVEL4 = 4, /**< 4 entry watermark */ + IX_QMGR_Q_WM_LEVEL8 = 8, /**< 8 entry watermark */ + IX_QMGR_Q_WM_LEVEL16 = 16, /**< 16 entry watermark */ + IX_QMGR_Q_WM_LEVEL32 = 32, /**< 32 entry watermark */ + IX_QMGR_Q_WM_LEVEL64 = 64 /**< 64 entry watermark */ +} IxQMgrWMLevel; + +/** + * @ingroup IxQMgrAPI + * + * @enum IxQMgrDispatchGroup + * + * @brief QMgr dispatch group select identifiers. + * + * This enum defines the groups over which the dispatcher will process when + * called. One of the enum values must be used as a input to + * @a ixQMgrDispatcherLoopRunA0, @a ixQMgrDispatcherLoopRunB0 + * or @a ixQMgrDispatcherLoopRunB0LLP. + * + */ +typedef enum +{ + IX_QMGR_QUELOW_GROUP = 0, /**< Queues 0-31 */ + IX_QMGR_QUEUPP_GROUP /**< Queues 32-63 */ +} IxQMgrDispatchGroup; + +/** + * @ingroup IxQMgrAPI + * + * @enum IxQMgrPriority + * + * @brief Dispatcher priority levels. + * + * This enum defines the different queue dispatch priority levels. + * The lowest priority number (0) is the highest priority level. + * + */ +typedef enum +{ + IX_QMGR_Q_PRIORITY_0 = 0, /**< Priority level 0 */ + IX_QMGR_Q_PRIORITY_1, /**< Priority level 1 */ + IX_QMGR_Q_PRIORITY_2, /**< Priority level 2 */ + IX_QMGR_Q_PRIORITY_INVALID /**< Invalid Priority level */ +} IxQMgrPriority; + +/** + * @ingroup IxQMgrAPI + * + * @enum IxQMgrType + * + * @brief Callback types as used with livelock prevention + * + * This enum defines the different callback types. + * These types are only used when Livelock prevention is enabled. + * The default is IX_QMGR_TYPE_REALTIME_OTHER. + * + */ + +typedef enum +{ + IX_QMGR_TYPE_REALTIME_OTHER = 0, /**< Real time callbacks-always allowed run*/ + IX_QMGR_TYPE_REALTIME_PERIODIC, /**< Periodic callbacks-always allowed run */ + IX_QMGR_TYPE_REALTIME_SPORADIC /**< Sporadic callbacks-only run if no + periodic callbacks are in progress */ +} IxQMgrType; + + +/** + * @ingroup IxQMgrAPI + * + * @typedef IxQMgrCallbackId + * + * @brief Uniquely identifies a callback function. + * + * A unique callback identifier associated with each callback + * registered by clients. + * + */ +typedef unsigned IxQMgrCallbackId; + +/** + * @typedef IxQMgrCallback + * + * @brief QMgr notification callback type. + * + * This defines the interface to all client callback functions. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * @param cbId @ref IxQMgrCallbackId [in] - the callback identifier + */ +typedef void (*IxQMgrCallback)(IxQMgrQId qId, + IxQMgrCallbackId cbId); + +/** + * @ingroup IxQMgrAPI + * + * @typedef IxQMgrDispatcherFuncPtr + * + * @brief QMgr Dispatcher Loop function pointer. + * + * This defines the interface for QMgr Dispather functions. + * + * @param group @ref IxQMgrDispatchGroup [in] - the group of the + * queue of which the dispatcher will run + */ +typedef void (*IxQMgrDispatcherFuncPtr)(IxQMgrDispatchGroup group); + +/* + * Function Prototypes + */ + +/* ------------------------------------------------------------ + Initialisation related functions + ---------------------------------------------------------- */ + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrInit (void) + * + * @brief Initialise the QMgr. + * + * This function must be called before and other QMgr function. It + * sets up internal data structures. + * + * @return @li IX_SUCCESS, the IxQMgr successfully initialised + * @return @li IX_FAIL, failed to initialize the Qmgr + * + */ +PUBLIC IX_STATUS +ixQMgrInit (void); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrUnload (void) + * + * @brief Uninitialise the QMgr. + * + * This function will perform the tasks required to unload the QMgr component + * cleanly. This includes unmapping kernel memory. + * This should be called before a soft reboot or unloading of a kernel module. + * + * @pre It should only be called if @ref ixQMgrInit has already been called. + * + * @post No QMgr functions should be called until ixQMgrInit is called again. + * + * @return @li IX_SUCCESS, the IxQMgr successfully uninitialised + * @return @li IX_FAIL, failed to uninitialize the Qmgr + * + */ +PUBLIC IX_STATUS +ixQMgrUnload (void); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrShow (void) + * + * @brief Describe queue configuration and statistics for active queues. + * + * This function shows active queues, their configurations and statistics. + * + * @return @li void + * + */ +PUBLIC void +ixQMgrShow (void); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQShow (IxQMgrQId qId) + * + * @brief Display aqueue configuration and statistics for a queue. + * + * This function shows queue configuration and statistics for a queue. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * + * @return @li IX_SUCCESS, success + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * + */ +PUBLIC IX_STATUS +ixQMgrQShow (IxQMgrQId qId); + + +/* ------------------------------------------------------------ + Configuration related functions + ---------------------------------------------------------- */ + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQConfig (char *qName, + IxQMgrQId qId, + IxQMgrQSizeInWords qSizeInWords, + IxQMgrQEntrySizeInWords qEntrySizeInWords) + * + * @brief Configure an AQM queue. + * + * This function is called by a client to setup a queue. The size and entrySize + * qId and qName(NULL pointer) are checked for valid values. This function must + * be called for each queue, before any queue accesses are made and after + * ixQMgrInit() has been called. qName is assumed to be a '\0' terminated array + * of 16 charachters or less. + * + * @param *qName char [in] - is the name provided by the client and is associated + * with a QId by the QMgr. + * @param qId @ref IxQMgrQId [in] - the qId of this queue + * @param qSizeInWords @ref IxQMgrQSize [in] - the size of the queue can be one of 16,32 + * 64, 128 words. + * @param qEntrySizeInWords @ref IxQMgrQEntrySizeInWords [in] - the size of a queue entry + * can be one of 1,2,4 words. + * + * @return @li IX_SUCCESS, a specified queue has been successfully configured. + * @return @li IX_FAIL, IxQMgr has not been initialised. + * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s). + * @return @li IX_QMGR_INVALID_QSIZE, invalid queue size + * @return @li IX_QMGR_INVALID_Q_ID, invalid queue id + * @return @li IX_QMGR_INVALID_Q_ENTRY_SIZE, invalid queue entry size + * @return @li IX_QMGR_Q_ALREADY_CONFIGURED, queue already configured + * + */ +PUBLIC IX_STATUS +ixQMgrQConfig (char *qName, + IxQMgrQId qId, + IxQMgrQSizeInWords qSizeInWords, + IxQMgrQEntrySizeInWords qEntrySizeInWords); + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQSizeInEntriesGet (IxQMgrQId qId, + unsigned *qSizeInEntries) + * + * @brief Return the size of a queue in entries. + * + * This function returns the the size of the queue in entriese. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * @param *qSizeInEntries @ref IxQMgrQSize [out] - queue size in entries + * + * @return @li IX_SUCCESS, successfully retrieved the number of full entrie + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s). + * + */ +PUBLIC IX_STATUS +ixQMgrQSizeInEntriesGet (IxQMgrQId qId, + unsigned *qSizeInEntries); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrWatermarkSet (IxQMgrQId qId, + IxQMgrWMLevel ne, + IxQMgrWMLevel nf) + * + * @brief Set the Nearly Empty and Nearly Full Watermarks fo a queue. + * + * This function is called by a client to set the watermarks NE and NF for the + * queue specified by qId. + * The queue must be empty at the time this function is called, it is the clients + * responsibility to ensure that the queue is empty. + * This function will read the status of the queue before the watermarks are set + * and again after the watermarks are set. If the status register has changed, + * due to a queue access by an NPE for example, a warning is returned. + * Queues 32-63 only support the NE flag, therefore the value of nf will be ignored + * for these queues. + * + * @param qId @ref IxQMgrQId [in] - the QId of the queue. + * @param ne @ref IxQMgrWMLevel [in] - the NE(Nearly Empty) watermark for this + * queue. Valid values are 0,1,2,4,8,16,32 and + * 64 entries. + * @param nf @ref IxQMgrWMLevel [in] - the NF(Nearly Full) watermark for this queue. + * Valid values are 0,1,2,4,8,16,32 and 64 + * entries. + * + * @return @li IX_SUCCESS, watermarks have been set for the queu + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * @return @li IX_QMGR_INVALID_Q_WM, invalid watermark + * @return @li IX_QMGR_WARNING, the status register may not be constistent + * + */ +PUBLIC IX_STATUS +ixQMgrWatermarkSet (IxQMgrQId qId, + IxQMgrWMLevel ne, + IxQMgrWMLevel nf); + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrAvailableSramAddressGet (UINT32 *address, + unsigned *sizeOfFreeSram) + * + * @brief Return the address of available AQM SRAM. + * + * This function returns the starting address in AQM SRAM not used by the + * current queue configuration and should only be called after all queues + * have been configured. + * Calling this function before all queues have been configured will will return + * the currently available SRAM. A call to configure another queue will use some + * of the available SRAM. + * The amount of SRAM available is specified in sizeOfFreeSram. The address is the + * address of the bottom of available SRAM. Available SRAM extends from address + * from address to address + sizeOfFreeSram. + * + * @param **address UINT32 [out] - the address of the available SRAM, NULL if + * none available. + * @param *sizeOfFreeSram unsigned [out]- the size in words of available SRAM + * + * @return @li IX_SUCCESS, there is available SRAM and is pointed to by address + * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s) + * @return @li IX_QMGR_NO_AVAILABLE_SRAM, all AQM SRAM is consumed by the queue + * configuration. + * + */ +PUBLIC IX_STATUS +ixQMgrAvailableSramAddressGet (UINT32 *address, + unsigned *sizeOfFreeSram); + + +/* ------------------------------------------------------------ + Queue access related functions + ---------------------------------------------------------- */ + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQReadWithChecks (IxQMgrQId qId, + UINT32 *entry) + * + * @brief Read an entry from a queue. + * + * This function reads an entire entry from a queue returning it in entry. The + * queue configuration word is read to determine what entry size this queue is + * configured for and then the number of words specified by the entry size is + * read. entry must be a pointer to a previously allocated array of sufficient + * size to hold an entry. + * + * @note - IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63 + * do not have an underflow status maintained. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param *entry UINT32 [out] - pointer to the entry word(s). + * + * @return @li IX_SUCCESS, entry was successfully read. + * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue + * + */ +PUBLIC IX_STATUS +ixQMgrQReadWithChecks (IxQMgrQId qId, + UINT32 *entry); + + + +/** + * @brief Internal structure to facilitate inlining functions in IxQMgr.h + */ +typedef struct +{ + /* fields related to write functions */ + UINT32 qOflowStatBitMask; /**< overflow status mask */ + UINT32 qWriteCount; /**< queue write count */ + + /* fields related to read and write functions */ + volatile UINT32 *qAccRegAddr; /**< access register */ + volatile UINT32 *qUOStatRegAddr; /**< status register */ + volatile UINT32 *qConfigRegAddr; /**< config register */ + UINT32 qEntrySizeInWords; /**< queue entry size in words */ + UINT32 qSizeInEntries; /**< queue size in entries */ + + /* fields related to read functions */ + UINT32 qUflowStatBitMask; /**< underflow status mask */ + UINT32 qReadCount; /**< queue read count */ +} IxQMgrQInlinedReadWriteInfo; + + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, + UINT32 *entry) + * + * @brief This function reads the remaining of the q entry + * for queues configured with many words. + * (the first word of the entry is already read + * in the inlined function and the entry pointer already + * incremented + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param *entry UINT32 [out] - pointer to the entry word(s). + * + * @return @li IX_SUCCESS, entry was successfully read. + * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue + * + */ +PUBLIC IX_STATUS +ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, + UINT32 *entry); + + + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQRead (IxQMgrQId qId, + UINT32 *entry) + * + * @brief Fast read of an entry from a queue. + * + * This function is a heavily streamlined version of ixQMgrQReadWithChecks(), + * but performs essentially the same task. It reads an entire entry from a + * queue, returning it in entry which must be a pointer to a previously + * allocated array of sufficient size to hold an entry. + * + * @note - This function is inlined, to reduce unnecessary function call + * overhead. It does not perform any parameter checks, or update any statistics. + * Also, it does not check that the queue specified by qId has been configured. + * or is in range. It simply reads an entry from the queue, and checks for + * underflow. + * + * @note - IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63 + * do not have an underflow status maintained. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param *entry UINT32 [out] - pointer to the entry word(s). + * + * @return @li IX_SUCCESS, entry was successfully read. + * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue + * + */ +#ifdef NO_INLINE_APIS +PUBLIC IX_STATUS +ixQMgrQRead (IxQMgrQId qId, + UINT32 *entryPtr); +#else +extern IxQMgrQInlinedReadWriteInfo ixQMgrQInlinedReadWriteInfo[]; +extern IX_STATUS ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, UINT32 *entryPtr); + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQRead (IxQMgrQId qId, + UINT32 *entryPtr); +#endif + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQRead (IxQMgrQId qId, + UINT32 *entryPtr) +#ifdef NO_INLINE_APIS + ; +#else +{ + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 entry, entrySize; + + /* get a new entry */ + entrySize = infoPtr->qEntrySizeInWords; + entry = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr); + + if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) + { + *entryPtr = entry; + /* process the remaining part of the entry */ + return ixQMgrQReadMWordsMinus1(qId, entryPtr); + } + + /* underflow is available for lower queues only */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* the counter of queue entries is decremented. In happy + * day scenario there are many entries in the queue + * and the counter does not reach zero. + */ + if (infoPtr->qReadCount-- == 0) + { + /* There is maybe no entry in the queue + * qReadCount is now negative, but will be corrected before + * the function returns. + */ + UINT32 qPtrs; /* queue internal pointers */ + + /* when a queue is empty, the hw guarantees to return + * a null value. If the value is not null, the queue is + * not empty. + */ + if (entry == 0) + { + /* get the queue status */ + UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); + + /* check the underflow status */ + if (status & infoPtr->qUflowStatBitMask) + { + /* the queue is empty + * clear the underflow status bit if it was set + */ + IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qUflowStatBitMask); + *entryPtr = 0; + infoPtr->qReadCount = 0; + return IX_QMGR_Q_UNDERFLOW; + } + } + /* store the result */ + *entryPtr = entry; + + /* No underflow occured : someone is filling the queue + * or the queue contains null entries. + * The current counter needs to be + * updated from the current number of entries in the queue + */ + + /* get snapshot of queue pointers */ + qPtrs = IX_QMGR_INLINE_READ_LONG(infoPtr->qConfigRegAddr); + + /* Mod subtraction of pointers to get number of words in Q. */ + qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; + + if (qPtrs == 0) + { + /* no entry in the queue */ + infoPtr->qReadCount = 0; + } + else + { + /* convert the number of words inside the queue + * to a number of entries + */ + infoPtr->qReadCount = qPtrs & (infoPtr->qSizeInEntries - 1); + } + return IX_SUCCESS; + } + } + *entryPtr = entry; + return IX_SUCCESS; +} +#endif + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQBurstRead (IxQMgrQId qId, + UINT32 numEntries, + UINT32 *entries) + * + * @brief Read a number of entries from an AQM queue. + * + * This function will burst read a number of entries from the specified queue. + * The entry size of queue is auto-detected. The function will attempt to + * read as many entries as specified by the numEntries parameter and will + * return an UNDERFLOW if any one of the individual entry reads fail. + * + * @warning + * IX_QMGR_Q_UNDERFLOW is only returned for queues 0-31 as queues 32-63 + * do not have an underflow status maintained, hence there is a potential for + * silent failure here. This function must be used with caution. + * + * @note + * This function is intended for fast draining of queues, so to make it + * as efficient as possible, it has the following features: + * - This function is inlined, to reduce unnecessary function call overhead. + * - It does not perform any parameter checks, or update any statistics. + * - It does not check that the queue specified by qId has been configured. + * - It does not check that the queue has the number of full entries that + * have been specified to be read. It will read until it finds a NULL entry or + * until the number of specified entries have been read. It always checks for + * underflow after all the reads have been performed. + * Therefore, the client should ensure before calling this function that there + * are enough entries in the queue to read. ixQMgrQNumEntriesGet() will + * provide the number of full entries in a queue. + * ixQMgrQRead() or ixQMgrQReadWithChecks(), which only reads + * a single queue entry per call, should be used instead if the user requires + * checks for UNDERFLOW after each entry read. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param numEntries unsigned [in] - the number of entries to read. + * This number should be greater than 0 + * @param *entries UINT32 [out] - the word(s) read. + * + * @return @li IX_SUCCESS, entries were successfully read. + * @return @li IX_QMGR_Q_UNDERFLOW, attempt to read from an empty queue + * + */ +#ifdef NO_INLINE_APIS +PUBLIC IX_STATUS +ixQMgrQBurstRead (IxQMgrQId qId, + UINT32 numEntries, + UINT32 *entries); +#else +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQBurstRead (IxQMgrQId qId, + UINT32 numEntries, + UINT32 *entries); +#endif /* endif NO_INLINE_APIS */ + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQBurstRead (IxQMgrQId qId, + UINT32 numEntries, + UINT32 *entries) +#ifdef NO_INLINE_APIS +; +#else +{ + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 nullCheckEntry; + + if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) + { + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + + /* the code is optimized to take care of data dependencies: + * Durig a read, there are a few cycles needed to get the + * read complete. During these cycles, it is poossible to + * do some CPU, e.g. increment pointers and decrement + * counters. + */ + + /* fetch a queue entry */ + nullCheckEntry = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr); + + /* iterate the specified number of queue entries */ + while (--numEntries) + { + /* check the result of the previous read */ + if (nullCheckEntry == 0) + { + /* if we read a NULL entry, stop. We have underflowed */ + break; + } + else + { + /* write the entry */ + *entries = nullCheckEntry; + /* fetch next entry */ + nullCheckEntry = IX_QMGR_INLINE_READ_LONG(qAccRegAddr); + /* increment the write address */ + entries++; + } + } + /* write the pre-fetched entry */ + *entries = nullCheckEntry; + } + else + { + IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; + /* read the specified number of queue entries */ + nullCheckEntry = 0; + while (numEntries--) + { + UINT32 i; + + for (i = 0; i < (UINT32)entrySizeInWords; i++) + { + *entries = IX_QMGR_INLINE_READ_LONG(infoPtr->qAccRegAddr + i); + nullCheckEntry |= *entries++; + } + + /* if we read a NULL entry, stop. We have underflowed */ + if (nullCheckEntry == 0) + { + break; + } + nullCheckEntry = 0; + } + } + + /* reset the current read count : next access to the read function + * will force a underflow status check + */ + infoPtr->qReadCount = 0; + + /* Check if underflow occurred on the read */ + if (nullCheckEntry == 0 && qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* get the queue status */ + UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); + + if (status & infoPtr->qUflowStatBitMask) + { + /* clear the underflow status bit if it was set */ + IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qUflowStatBitMask); + return IX_QMGR_Q_UNDERFLOW; + } + } + + return IX_SUCCESS; +} +#endif + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQPeek (IxQMgrQId qId, + unsigned int entryIndex, + UINT32 *entry) + * + * @brief Read an entry from a queue without moving the read pointer. + * + * This function inspects an entry in a queue. The entry is inspected directly + * in AQM SRAM and is not read from queue access registers. The entry is NOT removed + * from the queue and the read/write pointers are unchanged. + * N.B: The queue should not be accessed when this function is called. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param entryIndex unsigned int [in] - index of entry in queue in the range + * [0].......[current number of entries in queue]. + * @param *entry UINT32 [out] - pointer to the entry word(s). + * + * @return @li IX_SUCCESS, entry was successfully inspected. + * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId. + * @return @li IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS, an entry does not exist at + * specified index. + * @return @li IX_FAIL, failed to inpected the queue entry. + */ +PUBLIC IX_STATUS +ixQMgrQPeek (IxQMgrQId qId, + unsigned int entryIndex, + UINT32 *entry); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQWriteWithChecks (IxQMgrQId qId, + UINT32 *entry) + * + * @brief Write an entry to an AQM queue. + * + * This function will write the entry size number of words pointed to by entry to + * the queue specified by qId. The queue configuration word is read to + * determine the entry size of queue and the corresponding number of words is + * then written to the queue. + * + * @note - IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63 + * do not have an overflow status maintained. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param *entry UINT32 [in] - the word(s) to write. + * + * @return @li IX_SUCCESS, value was successfully written. + * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue + * + */ +PUBLIC IX_STATUS +ixQMgrQWriteWithChecks (IxQMgrQId qId, + UINT32 *entry); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQWrite (IxQMgrQId qId, + UINT32 *entry) + * + * @brief Fast write of an entry to a queue. + * + * This function is a heavily streamlined version of ixQMgrQWriteWithChecks(), + * but performs essentially the same task. It will write the entry size number + * of words pointed to by entry to the queue specified by qId. + * + * @note - This function is inlined, to reduce unnecessary function call + * overhead. It does not perform any parameter checks, or update any + * statistics. Also, it does not check that the queue specified by qId has + * been configured. It simply writes an entry to the queue, and checks for + * overflow. + * + * @note - IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63 + * do not have an overflow status maintained. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param *entry UINT32 [in] - pointer to the entry word(s). + * + * @return @li IX_SUCCESS, entry was successfully read. + * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue + * + */ +#ifdef NO_INLINE_APIS +PUBLIC IX_STATUS +ixQMgrQWrite (IxQMgrQId qId, + UINT32 *entry); +#else +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQWrite (IxQMgrQId qId, + UINT32 *entry); +#endif /* NO_INLINE_APIS */ + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQWrite (IxQMgrQId qId, + UINT32 *entry) +#ifdef NO_INLINE_APIS + ; +#else +{ + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 entrySize; + + /* write the entry */ + IX_QMGR_INLINE_WRITE_LONG(infoPtr->qAccRegAddr, *entry); + entrySize = infoPtr->qEntrySizeInWords; + + if (entrySize != IX_QMGR_Q_ENTRY_SIZE1) + { + /* process the remaining part of the entry */ + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + while (--entrySize) + { + ++entry; + IX_QMGR_INLINE_WRITE_LONG(++qAccRegAddr, *entry); + } + entrySize = infoPtr->qEntrySizeInWords; + } + + /* overflow is available for lower queues only */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + UINT32 qSize = infoPtr->qSizeInEntries; + /* increment the current number of entries in the queue + * and check for overflow + */ + if (infoPtr->qWriteCount++ == qSize) + { + /* the queue may have overflow */ + UINT32 qPtrs; /* queue internal pointers */ + + /* get the queue status */ + UINT32 status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); + + /* read the status twice because the status may + * not be immediately ready after the write operation + */ + if ((status & infoPtr->qOflowStatBitMask) || + ((status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr)) + & infoPtr->qOflowStatBitMask)) + { + /* the queue is full, clear the overflow status + * bit if it was set + */ + IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qOflowStatBitMask); + infoPtr->qWriteCount = infoPtr->qSizeInEntries; + return IX_QMGR_Q_OVERFLOW; + } + /* No overflow occured : someone is draining the queue + * and the current counter needs to be + * updated from the current number of entries in the queue + */ + + /* get q pointer snapshot */ + qPtrs = IX_QMGR_INLINE_READ_LONG(infoPtr->qConfigRegAddr); + + /* Mod subtraction of pointers to get number of words in Q. */ + qPtrs = (qPtrs - (qPtrs >> 7)) & 0x7f; + + if (qPtrs == 0) + { + /* the queue may be full at the time of the + * snapshot. Next access will check + * the overflow status again. + */ + infoPtr->qWriteCount = qSize; + } + else + { + /* convert the number of words to a number of entries */ + if (entrySize == IX_QMGR_Q_ENTRY_SIZE1) + { + infoPtr->qWriteCount = qPtrs & (qSize - 1); + } + else + { + infoPtr->qWriteCount = (qPtrs / entrySize) & (qSize - 1); + } + } + } + } + return IX_SUCCESS; +} +#endif + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQBurstWrite (IxQMgrQId qId, + unsigned numEntries, + UINT32 *entries) + * + * @brief Write a number of entries to an AQM queue. + * + * This function will burst write a number of entries to the specified queue. + * The entry size of queue is auto-detected. The function will attempt to + * write as many entries as specified by the numEntries parameter and will + * return an OVERFLOW if any one of the individual entry writes fail. + * + * @warning + * IX_QMGR_Q_OVERFLOW is only returned for queues 0-31 as queues 32-63 + * do not have an overflow status maintained, hence there is a potential for + * silent failure here. This function must be used with caution. + * + * @note + * This function is intended for fast population of queues, so to make it + * as efficient as possible, it has the following features: + * - This function is inlined, to reduce unnecessary function call overhead. + * - It does not perform any parameter checks, or update any statistics. + * - It does not check that the queue specified by qId has been configured. + * - It does not check that the queue has enough free space to hold the entries + * before writing, and only checks for overflow after all writes have been + * performed. Therefore, the client should ensure before calling this function + * that there is enough free space in the queue to hold the number of entries + * to be written. ixQMgrQWrite() or ixQMgrQWriteWithChecks(), which only writes + * a single queue entry per call, should be used instead if the user requires + * checks for OVERFLOW after each entry written. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param numEntries unsigned [in] - the number of entries to write. + * @param *entries UINT32 [in] - the word(s) to write. + * + * @return @li IX_SUCCESS, value was successfully written. + * @return @li IX_QMGR_Q_OVERFLOW, attempt to write to a full queue + * + */ +#ifdef NO_INLINE_APIS +PUBLIC IX_STATUS +ixQMgrQBurstWrite (IxQMgrQId qId, + unsigned numEntries, + UINT32 *entries); +#else +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQBurstWrite (IxQMgrQId qId, + unsigned numEntries, + UINT32 *entries); +#endif /* NO_INLINE_APIS */ + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQBurstWrite (IxQMgrQId qId, + unsigned numEntries, + UINT32 *entries) +#ifdef NO_INLINE_APIS +; +#else +{ + IxQMgrQInlinedReadWriteInfo *infoPtr = &ixQMgrQInlinedReadWriteInfo[qId]; + UINT32 status; + + /* update the current write count */ + infoPtr->qWriteCount += numEntries; + + if (infoPtr->qEntrySizeInWords == IX_QMGR_Q_ENTRY_SIZE1) + { + volatile UINT32 *qAccRegAddr = infoPtr->qAccRegAddr; + while (numEntries--) + { + IX_QMGR_INLINE_WRITE_LONG(qAccRegAddr, *entries); + entries++; + } + } + else + { + IxQMgrQEntrySizeInWords entrySizeInWords = infoPtr->qEntrySizeInWords; + UINT32 i; + + /* write each queue entry */ + while (numEntries--) + { + /* write the queueEntrySize number of words for each entry */ + for (i = 0; i < (UINT32)entrySizeInWords; i++) + { + IX_QMGR_INLINE_WRITE_LONG((infoPtr->qAccRegAddr + i), *entries); + entries++; + } + } + } + + /* check if the write count overflows */ + if (infoPtr->qWriteCount > infoPtr->qSizeInEntries) + { + /* reset the current write count */ + infoPtr->qWriteCount = infoPtr->qSizeInEntries; + } + + /* Check if overflow occurred on the write operation */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + /* get the queue status */ + status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr); + + /* read the status twice because the status may + * not be ready at the time of the write + */ + if ((status & infoPtr->qOflowStatBitMask) || + ((status = IX_QMGR_INLINE_READ_LONG(infoPtr->qUOStatRegAddr)) + & infoPtr->qOflowStatBitMask)) + { + /* clear the underflow status bit if it was set */ + IX_QMGR_INLINE_WRITE_LONG(infoPtr->qUOStatRegAddr, + status & ~infoPtr->qOflowStatBitMask); + return IX_QMGR_Q_OVERFLOW; + } + } + + return IX_SUCCESS; +} +#endif + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQPoke (IxQMgrQId qId, + unsigned int entryIndex, + UINT32 *entry) + * + * @brief Write an entry to a queue without moving the write pointer. + * + * This function modifies an entry in a queue. The entry is modified directly + * in AQM SRAM and not using the queue access registers. The entry is NOT added to the + * queue and the read/write pointers are unchanged. + * N.B: The queue should not be accessed when this function is called. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param entryIndex unsigned int [in] - index of entry in queue in the range + * [0].......[current number of entries in queue]. + * @param *entry UINT32 [in] - pointer to the entry word(s). + * + * @return @li IX_SUCCESS, entry was successfully modified. + * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId. + * @return @li IX_QMGR_ENTRY_INDEX_OUT_OF_BOUNDS, an entry does not exist at + * specified index. + * @return @li IX_FAIL, failed to modify the queue entry. + */ +PUBLIC IX_STATUS +ixQMgrQPoke (IxQMgrQId qId, + unsigned int entryIndex, + UINT32 *entry); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQNumEntriesGet (IxQMgrQId qId, + unsigned *numEntries) + * + * @brief Get a snapshot of the number of entries in a queue. + * + * This function gets the number of entries in a queue. + * + * @param qId @ref IxQMgrQId [in] qId - the queue idenfifier + * @param *numEntries unsigned [out] - the number of entries in a queue + * + * @return @li IX_SUCCESS, got the number of entries for the queue + * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter(s). + * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured + * @return @li IX_QMGR_WARNING, could not determine num entries at this time + * + */ +PUBLIC IX_STATUS +ixQMgrQNumEntriesGet (IxQMgrQId qId, + unsigned *numEntries); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQStatusGetWithChecks (IxQMgrQId qId, + IxQMgrQStatus *qStatus) + * + * @brief Get a queues status. + * + * This function reads the specified queues status. A queues status is defined + * by its status flags. For queues 0-31 these flags are E,NE,NF,F. For + * queues 32-63 these flags are NE and F. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param &qStatus @ref IxQMgrQStatus [out] - the status of the specified queue. + * + * @return @li IX_SUCCESS, queue status was successfully read. + * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured + * @return @li IX_QMGR_PARAMETER_ERROR, invalid paramter. + * + */ +PUBLIC IX_STATUS +ixQMgrQStatusGetWithChecks (IxQMgrQId qId, + IxQMgrQStatus *qStatus); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrQStatusGet (IxQMgrQId qId, + IxQMgrQStatus *qStatus) + * + * @brief Fast get of a queue's status. + * + * This function is a streamlined version of ixQMgrQStatusGetWithChecks(), but + * performs essentially the same task. It reads the specified queue's status. + * A queues status is defined by its status flags. For queues 0-31 these flags + * are E,NE,NF,F. For queues 32-63 these flags are NE and F. + * + * @note - This function is inlined, to reduce unnecessary function call + * overhead. It does not perform any parameter checks, or update any + * statistics. Also, it does not check that the queue specified by qId has + * been configured. It simply reads the specified queue's status. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier. + * @param *qStatus @ref IxQMgrQStatus [out] - the status of the specified queue. + * + * @return @li void. + * + */ + +#ifdef NO_INLINE_APIS +PUBLIC IX_STATUS +ixQMgrQStatusGet (IxQMgrQId qId, + IxQMgrQStatus *qStatus); +#else +extern UINT32 ixQMgrAqmIfQueLowStatRegAddr[]; +extern UINT32 ixQMgrAqmIfQueLowStatBitsOffset[]; +extern UINT32 ixQMgrAqmIfQueLowStatBitsMask; +extern UINT32 ixQMgrAqmIfQueUppStat0RegAddr; +extern UINT32 ixQMgrAqmIfQueUppStat1RegAddr; +extern UINT32 ixQMgrAqmIfQueUppStat0BitMask[]; +extern UINT32 ixQMgrAqmIfQueUppStat1BitMask[]; + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQStatusGet (IxQMgrQId qId, + IxQMgrQStatus *qStatus); +#endif /* endif NO_INLINE_APIS */ + +IX_QMGR_INLINE PUBLIC IX_STATUS +ixQMgrQStatusGet (IxQMgrQId qId, + IxQMgrQStatus *qStatus) +#ifdef NO_INLINE_APIS + ; +#else +{ + /* read the status of a queue in the range 0-31 */ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + volatile UINT32 *lowStatRegAddr = (UINT32*)ixQMgrAqmIfQueLowStatRegAddr[qId]; + + UINT32 lowStatBitsOffset = ixQMgrAqmIfQueLowStatBitsOffset[qId]; + UINT32 lowStatBitsMask = ixQMgrAqmIfQueLowStatBitsMask; + + /* read the status register for this queue */ + *qStatus = IX_QMGR_INLINE_READ_LONG(lowStatRegAddr); + + /* mask out the status bits relevant only to this queue */ + *qStatus = (*qStatus >> lowStatBitsOffset) & lowStatBitsMask; + + } + else /* read status of a queue in the range 32-63 */ + { + + volatile UINT32 *qNearEmptyStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat0RegAddr; + volatile UINT32 *qFullStatRegAddr = (UINT32*)ixQMgrAqmIfQueUppStat1RegAddr; + int maskIndex = qId - IX_QMGR_MIN_QUEUPP_QID; + UINT32 qNearEmptyStatBitMask = ixQMgrAqmIfQueUppStat0BitMask[maskIndex]; + UINT32 qFullStatBitMask = ixQMgrAqmIfQueUppStat1BitMask[maskIndex]; + + /* Reset the status bits */ + *qStatus = 0; + + /* Check if the queue is nearly empty */ + if (IX_QMGR_INLINE_READ_LONG(qNearEmptyStatRegAddr) & qNearEmptyStatBitMask) + { + *qStatus |= IX_QMGR_Q_STATUS_NE_BIT_MASK; + } + + /* Check if the queue is full */ + if (IX_QMGR_INLINE_READ_LONG(qFullStatRegAddr) & qFullStatBitMask) + { + *qStatus |= IX_QMGR_Q_STATUS_F_BIT_MASK; + } + } + return IX_SUCCESS; +} +#endif + +/* ------------------------------------------------------------ + Queue dispatch related functions + ---------------------------------------------------------- */ + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrDispatcherPrioritySet (IxQMgrQId qId, + IxQMgrPriority priority) + * + * @brief Set the dispatch priority of a queue. + * + * This function is called to set the dispatch priority of queue. The effect of + * this function is to add a priority change request to a queue. This queue is + * serviced by @a ixQMgrDispatcherLoopRunA0, @a ixQMgrDispatcherLoopRunB0 or + * @a ixQMgrDispatcherLoopRunB0LLP. + * + * This function is re-entrant. and can be used from an interrupt context + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * @param priority @ref IxQMgrPriority [in] - the new queue dispatch priority + * + * @return @li IX_SUCCESS, priority change request is queued + * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured + * @return @li IX_QMGR_Q_INVALID_PRIORITY, specified priority is invalid + * + */ +PUBLIC IX_STATUS +ixQMgrDispatcherPrioritySet (IxQMgrQId qId, + IxQMgrPriority priority); +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrNotificationEnable (IxQMgrQId qId, + IxQMgrSourceId sourceId) + * + * @brief Enable notification on a queue for a specified queue source flag. + * + * This function is called by a client of the QMgr to enable notifications on a + * specified condition. + * If the condition for the notification is set after the client has called this + * function but before the function has enabled the interrupt source, then the + * notification will not occur. + * For queues 32-63 the notification source is fixed to the NE(Nearly Empty) flag + * and cannot be changed so the sourceId parameter is ignored for these queues. + * The status register is read before the notofication is enabled and is read again + * after the notification has been enabled, if they differ then the warning status + * is returned. + * + * This function is re-entrant. and can be used from an interrupt context + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * @param sourceId @ref IxQMgrSourceId [in] - the interrupt src condition identifier + * + * @return @li IX_SUCCESS, the interrupt has been enabled for the specified source + * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured + * @return @li IX_QMGR_INVALID_INT_SOURCE_ID, interrupt source invalid for this queue + * @return @li IX_QMGR_WARNING, the status register may not be constistent + * + */ +PUBLIC IX_STATUS +ixQMgrNotificationEnable (IxQMgrQId qId, + IxQMgrSourceId sourceId); + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrNotificationDisable (IxQMgrQId qId) + * + * @brief Disable notifications on a queue. + * + * This function is called to disable notifications on a specified queue. + * + * This function is re-entrant. and can be used from an interrupt context + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * + * @return @li IX_SUCCESS, the interrupt has been disabled + * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured + * + */ +PUBLIC IX_STATUS +ixQMgrNotificationDisable (IxQMgrQId qId); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group) + * + * @brief Run the callback dispatcher. + * + * This function runs the dispatcher for a group of queues. + * Callbacks are made for interrupts that have occurred on queues within + * the group that have registered callbacks. The order in which queues are + * serviced depends on the queue priorities set by the client. + * This function may be called from interrupt or task context. + * For optimisations that were introduced in IXP42X B0 and supported IXP46X + * the @a ixQMgrDispatcherLoopRunB0, or @a ixQMgrDispatcherLoopRunB0LLP + * should be used. + * + * This function is not re-entrant. + * + * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which the + * dispatcher will run + * + * @return @li void + * + * @note This function may be called from interrupt or task context. + * However, for optimal performance the choice of context depends also on the + * operating system used. + * + */ +PUBLIC void +ixQMgrDispatcherLoopRunA0 (IxQMgrDispatchGroup group); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group) + * + * @brief Run the callback dispatcher. + * + * The enhanced version of @a ixQMgrDispatcherLoopRunA0 that is optimised for + * features introduced in IXP42X B0 silicon and supported on IXP46X. + * This is the default dispatcher for IXP42X B0 and IXP46X silicon. + * The function runs the dispatcher for a group of queues. + * Callbacks are made for interrupts that have occurred on queues within + * the group that have registered callbacks. The order in which queues are + * serviced depends on the queue priorities set by the client. + * This function may be called from interrupt or task context. + * + * This function is not re-entrant. + * + * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which the + * dispatcher will run + * + * @return @li void + * + * + * @note This function may be called from interrupt or task context. + * However, for optimal performance the choice of context depends also on the + * operating system used. + * + */ +PUBLIC void +ixQMgrDispatcherLoopRunB0 (IxQMgrDispatchGroup group); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group) + * + * @brief Run the callback dispatcher. + * + * This is a version of the optimised dispatcher for IXP42X B0 and IXP46X, + * @a ixQMgrDispatcherLoopRunB0, with added support for livelock prevention. + * This dispatcher will only be used for the IXP42X B0 or IXP46X silicon if + * feature control indicates that IX_FEATURECTRL_ORIGB0_DISPATCHER is set to + * IX_FEATURE_CTRL_SWCONFIG_DISABLED. Otherwise the @a ixQMgrDispatcherLoopRunB0 + * dispatcher will be used (Default). + * + * When this dispatcher notifies for a queue that is type + * IX_QMGR_TYPE_REALTIME_PERIODIC, notifications for queues that are set + * as type IX_QMGR_REALTIME_SPORADIC are not processed and disabled. + * This helps prevent any tasks resulting from the notification of the + * IX_QMGR_TYPE_REALTIME_PERIODIC type queue to being subject to livelock. + * The function runs the dispatcher for a group of queues. + * Callbacks are made for interrupts that have occurred on queues within + * the group that have registered callbacks. The order in which queues are + * serviced depends on their type along with the queue priorities set by the + * client. This function may be called from interrupt or task context. + * + * This function is not re-entrant. + * + * @param group @ref IxQMgrDispatchGroup [in] - the group of queues over which + * the dispatcher will run + * + * @return @li void + * + * @note This function may be called from interrupt or task context. + * However, for optimal performance the choice of context depends also on the + * operating system used. + * + */ +PUBLIC void +ixQMgrDispatcherLoopRunB0LLP (IxQMgrDispatchGroup group); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrNotificationCallbackSet (IxQMgrQId qId, + IxQMgrCallback callback, + IxQMgrCallbackId callbackId) + * + * @brief Set the notification callback for a queue. + * + * This function sets the callback for the specified queue. This callback will + * be called by the dispatcher, and may be called in the context of a interrupt + * If callback has a value of NULL the previously registered callback, if one + * exists will be unregistered. + * + * @param qId @ref IxQMgrQId [in] - the queue idenfifier + * @param callback @ref IxQMgrCallback [in] - the callback registered for this queue + * @param callbackId @ref IxQMgrCallbackId [in] - the callback identifier + * + * @return @li IX_SUCCESS, the callback for the specified queue has been set + * @return @li IX_QMGR_Q_NOT_CONFIGURED, the specified qId has not been configured + * + */ +PUBLIC IX_STATUS +ixQMgrNotificationCallbackSet (IxQMgrQId qId, + IxQMgrCallback callback, + IxQMgrCallbackId callbackId); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr) + * + * @brief Get QMgr DispatcherLoopRun for respective silicon device + * + * This function gets a function pointer to ixQMgrDispatcherLoopRunA0() for IXP42X A0 + * Silicon. If the IXP42X B0 or 46X Silicon, the default is the ixQMgrDispatcherLoopRunB0() + * function, however if live lock prevention is enabled a function pointer to + * ixQMgrDispatcherLoopRunB0LLP() is given. + * + * @param *qDispatchFuncPtr @ref IxQMgrDispatcherFuncPtr [out] - + * the function pointer of QMgr Dispatcher + * + */ +PUBLIC void +ixQMgrDispatcherLoopGet (IxQMgrDispatcherFuncPtr *qDispatcherFuncPtr); + +/** + * + * @ingroup IxQMgrAPI + * + * @fn ixQMgrStickyInterruptRegEnable(void) + * + * @brief Enable AQM's sticky interrupt register behaviour only available + * on B0 Silicon. + * + * When AQM's sticky interrupt register is enabled, interrupt register bit will + * only be cleared when a '1' is written to interrupt register bit and the + * interrupting condition is satisfied, i.e.queue condition does not exist. + * + * @note This function must be called before any queue is enabled. + * Calling this function after queue is enabled will cause + * undefined results. + * + * @return none + * + */ +PUBLIC void +ixQMgrStickyInterruptRegEnable(void); + + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrCallbackTypeSet(IxQMgrQId qId, + IxQMgrType type) + * + * @brief Set the Callback Type of a queue. + * + * This function is only used for live lock prevention. + * This function allows the callback type of a queue to be set. The default for + * all queues is IX_QMGR_TYPE_REALTIME_OTHER. Setting the type to + * IX_QMGR_TYPE_REALTIME_SPORADIC means that this queue will have it's + * notifications disabled while there is a task associated with a + * queue of type IX_QMGR_TYPE_REALTIME_PERIODIC running. As live lock + * prevention operates on lower queues, this function should + * be called for lower queues only. + * This function is not re-entrant. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * @param type @ref IxQMgrType [in] - the type of callback + * + * @return @li IX_SUCCESS, successfully set callback type for the queue entry + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s). + * + */ +PUBLIC IX_STATUS +ixQMgrCallbackTypeSet(IxQMgrQId qId, + IxQMgrType type); + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrCallbackTypeGet(IxQMgrQId qId, + IxQMgrType *type) + * + * @brief Get the Callback Type of a queue. + * + * This function allows the callback type of a queue to be got. As live lock + * prevention operates on lower queues, this function should + * be called for lower queues only. + * This function is re-entrant. + * + * @param qId @ref IxQMgrQId [in] - the queue identifier + * @param *type @ref IxQMgrType [out] - the type of callback + * + * @return @li IX_SUCCESS, successfully set callback type for the queue entry + * @return @li IX_QMGR_Q_NOT_CONFIGURED, queue not configured for this QId + * @return @li IX_QMGR_PARAMETER_ERROR, invalid parameter(s) + * + */ +PUBLIC IX_STATUS +ixQMgrCallbackTypeGet(IxQMgrQId qId, + IxQMgrType *type); + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrPeriodicDone(void) + * + * @brief Indicate that the Periodic task is completed for LLP + * + * This function is used as part of live lock prevention. + * A periodic task is a task that results from a queue that + * is set as type IX_QMGR_TYPE_REALTIME_PERIODIC. This function + * should be called to indicate to the dispatcher that the + * the periodic task is completed. This ensures that the notifications + * for queues set as type sporadic queues are re-enabled. + * This function is re-entrant. + * + */ +PUBLIC void +ixQMgrPeriodicDone(void); + + +/** + * @ingroup IxQMgrAPI + * + * @fn ixQMgrLLPShow(int resetStats) + * + * @brief Print out the live lock prevention statistics when in debug mode. + * + * This function prints out statistics related to the livelock. These + * statistics are only collected in debug mode. + * This function is not re-entrant. + * + * @param resetStats @ref int [in] - if set the the stats are reset. + * + */ +PUBLIC void +ixQMgrLLPShow(int resetStats); + + +#endif /* IXQMGR_H */ + +/** + * @} defgroup IxQMgrAPI + */ + + diff --git a/drivers/net/npe/include/IxQMgrAqmIf_p.h b/drivers/net/npe/include/IxQMgrAqmIf_p.h new file mode 100644 index 0000000000..4f0f64d273 --- /dev/null +++ b/drivers/net/npe/include/IxQMgrAqmIf_p.h @@ -0,0 +1,927 @@ +/** + * @file IxQMgrAqmIf_p.h + * + * @author Intel Corporation + * @date 30-Oct-2001 + * + * @brief The IxQMgrAqmIf sub-component provides a number of inline + * functions for performing I/O on the AQM. + * + * Because some functions contained in this module are inline and are + * used in other modules (within the QMgr component) the definitions are + * contained in this header file. The "normal" use of inline functions + * is to use the inline functions in the module in which they are + * defined. In this case these inline functions are used in external + * modules and therefore the use of "inline extern". What this means + * is as follows: if a function foo is declared as "inline extern"this + * definition is only used for inlining, in no case is the function + * compiled on its own. If the compiler cannot inline the function it + * becomes an external reference. Therefore in IxQMgrAqmIf.c all + * inline functions are defined without the "inline extern" specifier + * and so define the external references. In all other modules these + * funtions are defined as "inline extern". + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#ifndef IXQMGRAQMIF_P_H +#define IXQMGRAQMIF_P_H + +#include "IxOsalTypes.h" + +/* + * inline definition + */ + +#ifdef IX_OSAL_INLINE_ALL +/* If IX_OSAL_INLINE_ALL is set then each inlineable API functions will be defined as + inline functions */ +#define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN +#else +#ifdef IXQMGRAQMIF_C +#ifndef IX_QMGR_AQMIF_INLINE +#define IX_QMGR_AQMIF_INLINE +#endif +#else +#ifndef IX_QMGR_AQMIF_INLINE +#define IX_QMGR_AQMIF_INLINE IX_OSAL_INLINE_EXTERN +#endif +#endif /* IXQMGRAQMIF_C */ +#endif /* IX_OSAL_INLINE */ + + +/* + * User defined include files. + */ +#include "IxQMgr.h" +#include "IxQMgrLog_p.h" +#include "IxQMgrQCfg_p.h" + +/* Because this file contains inline functions which will be compiled into + * other components, we need to ensure that the IX_COMPONENT_NAME define + * is set to ix_qmgr while this code is being compiled. This will ensure + * that the correct implementation is provided for the memory access macros + * IX_OSAL_READ_LONG and IX_OSAL_WRITE_LONG which are used in this file. + * This must be done before including "IxOsalMemAccess.h" + */ +#define IX_QMGR_AQMIF_SAVED_COMPONENT_NAME IX_COMPONENT_NAME +#undef IX_COMPONENT_NAME +#define IX_COMPONENT_NAME ix_qmgr +#include "IxOsal.h" + +/* + * #defines and macros used in this file. + */ + +/* Number of bytes per word */ +#define IX_QMGR_NUM_BYTES_PER_WORD 4 + +/* Underflow bit mask */ +#define IX_QMGR_UNDERFLOW_BIT_OFFSET 0x0 + +/* Overflow bit mask */ +#define IX_QMGR_OVERFLOW_BIT_OFFSET 0x1 + +/* Queue access register, queue 0 */ +#define IX_QMGR_QUEACC0_OFFSET 0x0000 + +/* Size of queue access register in words */ +#define IX_QMGR_QUEACC_SIZE 0x4/*words*/ + +/* Queue status register, queues 0-7 */ +#define IX_QMGR_QUELOWSTAT0_OFFSET (IX_QMGR_QUEACC0_OFFSET +\ +(IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD)) + +/* Queue status register, queues 8-15 */ +#define IX_QMGR_QUELOWSTAT1_OFFSET (IX_QMGR_QUELOWSTAT0_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue status register, queues 16-23 */ +#define IX_QMGR_QUELOWSTAT2_OFFSET (IX_QMGR_QUELOWSTAT1_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue status register, queues 24-31 */ +#define IX_QMGR_QUELOWSTAT3_OFFSET (IX_QMGR_QUELOWSTAT2_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue status register Q status bits mask */ +#define IX_QMGR_QUELOWSTAT_QUE_STS_BITS_MASK 0xF + +/* Size of queue 0-31 status register */ +#define IX_QMGR_QUELOWSTAT_SIZE 0x4 /*words*/ + +/* The number of queues' status specified per word */ +#define IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD 0x8 + +/* Queue UF/OF status register queues 0-15 */ +#define IX_QMGR_QUEUOSTAT0_OFFSET (IX_QMGR_QUELOWSTAT3_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) +/* Queue UF/OF status register queues 16-31 */ +#define IX_QMGR_QUEUOSTAT1_OFFSET (IX_QMGR_QUEUOSTAT0_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* The number of queues' underflow/overflow status specified per word */ +#define IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD 0x10 + +/* Queue NE status register, queues 32-63 */ +#define IX_QMGR_QUEUPPSTAT0_OFFSET (IX_QMGR_QUEUOSTAT1_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue F status register, queues 32-63 */ +#define IX_QMGR_QUEUPPSTAT1_OFFSET (IX_QMGR_QUEUPPSTAT0_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Size of queue 32-63 status register */ +#define IX_QMGR_QUEUPPSTAT_SIZE 0x2 /*words*/ + +/* The number of queues' status specified per word */ +#define IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD 0x20 + +/* Queue INT source select register, queues 0-7 */ +#define IX_QMGR_INT0SRCSELREG0_OFFSET (IX_QMGR_QUEUPPSTAT1_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue INT source select register, queues 8-15 */ +#define IX_QMGR_INT0SRCSELREG1_OFFSET (IX_QMGR_INT0SRCSELREG0_OFFSET+\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue INT source select register, queues 16-23 */ +#define IX_QMGR_INT0SRCSELREG2_OFFSET (IX_QMGR_INT0SRCSELREG1_OFFSET+\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue INT source select register, queues 24-31 */ +#define IX_QMGR_INT0SRCSELREG3_OFFSET (IX_QMGR_INT0SRCSELREG2_OFFSET+\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Size of interrupt source select reegister */ +#define IX_QMGR_INT0SRCSELREG_SIZE 0x4 /*words*/ + +/* The number of queues' interrupt source select specified per word*/ +#define IX_QMGR_INTSRC_NUM_QUE_PER_WORD 0x8 + +/* Queue INT enable register, queues 0-31 */ +#define IX_QMGR_QUEIEREG0_OFFSET (IX_QMGR_INT0SRCSELREG3_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue INT enable register, queues 32-63 */ +#define IX_QMGR_QUEIEREG1_OFFSET (IX_QMGR_QUEIEREG0_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue INT register, queues 0-31 */ +#define IX_QMGR_QINTREG0_OFFSET (IX_QMGR_QUEIEREG1_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Queue INT register, queues 32-63 */ +#define IX_QMGR_QINTREG1_OFFSET (IX_QMGR_QINTREG0_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD) + +/* Size of interrupt register */ +#define IX_QMGR_QINTREG_SIZE 0x2 /*words*/ + +/* Number of queues' status specified per word */ +#define IX_QMGR_QINTREG_NUM_QUE_PER_WORD 0x20 + +/* Number of bits per queue interrupt status */ +#define IX_QMGR_QINTREG_BITS_PER_QUEUE 0x1 +#define IX_QMGR_QINTREG_BIT_OFFSET 0x1 + +/* Size of address space not used by AQM */ +#define IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES 0x1bC0 + +/* Queue config register, queue 0 */ +#define IX_QMGR_QUECONFIG_BASE_OFFSET (IX_QMGR_QINTREG1_OFFSET +\ + IX_QMGR_NUM_BYTES_PER_WORD +\ + IX_QMGR_AQM_UNUSED_ADDRESS_SPACE_SIZE_IN_BYTES) + +/* Total size of configuration words */ +#define IX_QMGR_QUECONFIG_SIZE 0x100 + +/* Start of SRAM queue buffer space */ +#define IX_QMGR_QUEBUFFER_SPACE_OFFSET (IX_QMGR_QUECONFIG_BASE_OFFSET +\ + IX_QMGR_MAX_NUM_QUEUES * IX_QMGR_NUM_BYTES_PER_WORD) + +/* Total bits in a word */ +#define BITS_PER_WORD 32 + +/* Size of queue buffer space */ +#define IX_QMGR_QUE_BUFFER_SPACE_SIZE 0x1F00 + +/* + * This macro will return the address of the access register for the + * queue specified by qId + */ +#define IX_QMGR_Q_ACCESS_ADDR_GET(qId)\ + (((qId) * (IX_QMGR_QUEACC_SIZE * IX_QMGR_NUM_BYTES_PER_WORD))\ + + IX_QMGR_QUEACC0_OFFSET) + +/* + * Bit location of bit-3 of INT0SRCSELREG0 register to enabled + * sticky interrupt register. + */ +#define IX_QMGR_INT0SRCSELREG0_BIT3 3 + +/* + * Variable declerations global to this file. Externs are followed by + * statics. + */ +extern UINT32 aqmBaseAddress; + +/* + * Function declarations. + */ +void +ixQMgrAqmIfInit (void); + +void +ixQMgrAqmIfUninit (void); + +unsigned +ixQMgrAqmIfLog2 (unsigned number); + +void +ixQMgrAqmIfQRegisterBitsWrite (IxQMgrQId qId, + UINT32 registerBaseAddrOffset, + unsigned queuesPerRegWord, + UINT32 value); + +void +ixQMgrAqmIfQStatusCheckValsCalc (IxQMgrQId qId, + IxQMgrSourceId srcSel, + unsigned int *statusWordOffset, + UINT32 *checkValue, + UINT32 *mask); +/* + * The Xscale software allways deals with logical addresses and so the + * base address of the AQM memory space is not a hardcoded value. This + * function must be called before any other function in this component. + * NO CHECKING is performed to ensure that the base address has been + * set. + */ +void +ixQMgrAqmIfBaseAddressSet (UINT32 address); + +/* + * Get the base address of the AQM memory space. + */ +void +ixQMgrAqmIfBaseAddressGet (UINT32 *address); + +/* + * Get the sram base address + */ +void +ixQMgrAqmIfSramBaseAddressGet (UINT32 *address); + +/* + * Read a queue status + */ +void +ixQMgrAqmIfQueStatRead (IxQMgrQId qId, + IxQMgrQStatus* status); + + +/* + * Set INT0SRCSELREG0 Bit3 + */ +void ixQMgrAqmIfIntSrcSelReg0Bit3Set (void); + + +/* + * Set the interrupt source + */ +void +ixQMgrAqmIfIntSrcSelWrite (IxQMgrQId qId, + IxQMgrSourceId sourceId); + +/* + * Enable interruptson a queue + */ +void +ixQMgrAqmIfQInterruptEnable (IxQMgrQId qId); + +/* + * Disable interrupt on a quee + */ +void +ixQMgrAqmIfQInterruptDisable (IxQMgrQId qId); + +/* + * Write the config register of the specified queue + */ +void +ixQMgrAqmIfQueCfgWrite (IxQMgrQId qId, + IxQMgrQSizeInWords qSizeInWords, + IxQMgrQEntrySizeInWords entrySizeInWords, + UINT32 freeSRAMAddress); + +/* + * read fields from the config of the specified queue. + */ +void +ixQMgrAqmIfQueCfgRead (IxQMgrQId qId, + unsigned int numEntries, + UINT32 *baseAddress, + unsigned int *ne, + unsigned int *nf, + UINT32 *readPtr, + UINT32 *writePtr); + +/* + * Set the ne and nf watermark level on a queue. + */ +void +ixQMgrAqmIfWatermarkSet (IxQMgrQId qId, + unsigned ne, + unsigned nf); + +/* Inspect an entry without moving the read pointer */ +IX_STATUS +ixQMgrAqmIfQPeek (IxQMgrQId qId, + unsigned int entryIndex, + unsigned int *entry); + +/* Modify an entry without moving the write pointer */ +IX_STATUS +ixQMgrAqmIfQPoke (IxQMgrQId qId, + unsigned int entryIndex, + unsigned int *entry); + +/* + * Function prototype for inline functions. For description refers to + * the functions defintion below. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfWordWrite (VUINT32 *address, + UINT32 word); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfWordRead (VUINT32 *address, + UINT32 *word); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQPop (IxQMgrQId qId, + IxQMgrQEntrySizeInWords numWords, + UINT32 *entry); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQPush (IxQMgrQId qId, + IxQMgrQEntrySizeInWords numWords, + UINT32 *entry); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group, + UINT32 *qStatusWords); + +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords, + UINT32 *newQStatusWords, + unsigned int statusWordOffset, + UINT32 checkValue, + UINT32 mask); + +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, + UINT32 registerBaseAddrOffset, + unsigned queuesPerRegWord, + unsigned relativeBitOffset, + BOOL reset); + +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId); + +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfOverflowCheck (IxQMgrQId qId); + +IX_QMGR_AQMIF_INLINE UINT32 +ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId, + UINT32 registerBaseAddrOffset, + unsigned queuesPerRegWord); +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group, + UINT32 reg); +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group, + UINT32 *regVal); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId, + IxQMgrQStatus *status); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId, + IxQMgrQStatus *status); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQueStatRead (IxQMgrQId qId, + IxQMgrQStatus *qStatus); + +IX_QMGR_AQMIF_INLINE unsigned +ixQMgrAqmIfPow2NumDivide (unsigned numerator, + unsigned denominator); + +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, + UINT32 *regVal); +/* + * Inline functions + */ + +/* + * This inline function is used by other QMgr components to write one + * word to the specified address. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfWordWrite (VUINT32 *address, + UINT32 word) +{ + IX_OSAL_WRITE_LONG(address, word); +} + +/* + * This inline function is used by other QMgr components to read a + * word from the specified address. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfWordRead (VUINT32 *address, + UINT32 *word) +{ + *word = IX_OSAL_READ_LONG(address); +} + + +/* + * This inline function is used by other QMgr components to pop an + * entry off the specified queue. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQPop (IxQMgrQId qId, + IxQMgrQEntrySizeInWords numWords, + UINT32 *entry) +{ + volatile UINT32 *accRegAddr; + + accRegAddr = (UINT32*)(aqmBaseAddress + + IX_QMGR_Q_ACCESS_ADDR_GET(qId)); + + switch (numWords) + { + case IX_QMGR_Q_ENTRY_SIZE1: + ixQMgrAqmIfWordRead (accRegAddr, entry); + break; + case IX_QMGR_Q_ENTRY_SIZE2: + ixQMgrAqmIfWordRead (accRegAddr++, entry++); + ixQMgrAqmIfWordRead (accRegAddr, entry); + break; + case IX_QMGR_Q_ENTRY_SIZE4: + ixQMgrAqmIfWordRead (accRegAddr++, entry++); + ixQMgrAqmIfWordRead (accRegAddr++, entry++); + ixQMgrAqmIfWordRead (accRegAddr++, entry++); + ixQMgrAqmIfWordRead (accRegAddr, entry); + break; + default: + IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPop"); + break; + } +} + +/* + * This inline function is used by other QMgr components to push an + * entry to the specified queue. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQPush (IxQMgrQId qId, + IxQMgrQEntrySizeInWords numWords, + UINT32 *entry) +{ + volatile UINT32 *accRegAddr; + + accRegAddr = (UINT32*)(aqmBaseAddress + + IX_QMGR_Q_ACCESS_ADDR_GET(qId)); + + switch (numWords) + { + case IX_QMGR_Q_ENTRY_SIZE1: + ixQMgrAqmIfWordWrite (accRegAddr, *entry); + break; + case IX_QMGR_Q_ENTRY_SIZE2: + ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); + ixQMgrAqmIfWordWrite (accRegAddr, *entry); + break; + case IX_QMGR_Q_ENTRY_SIZE4: + ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); + ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); + ixQMgrAqmIfWordWrite (accRegAddr++, *entry++); + ixQMgrAqmIfWordWrite (accRegAddr, *entry); + break; + default: + IX_QMGR_LOG_ERROR0("Invalid Q Entry size passed to ixQMgrAqmIfQPush"); + break; + } +} + +/* + * The AQM interrupt registers contains a bit for each AQM queue + * specifying the queue (s) that cause an interrupt to fire. This + * function is called by IxQMGrDispatcher component. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQStatusRegsRead (IxQMgrDispatchGroup group, + UINT32 *qStatusWords) +{ + volatile UINT32 *regAddress = NULL; + + if (group == IX_QMGR_QUELOW_GROUP) + { + regAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_QUELOWSTAT0_OFFSET); + + ixQMgrAqmIfWordRead (regAddress++, qStatusWords++); + ixQMgrAqmIfWordRead (regAddress++, qStatusWords++); + ixQMgrAqmIfWordRead (regAddress++, qStatusWords++); + ixQMgrAqmIfWordRead (regAddress, qStatusWords); + } + else /* We have the upper queues */ + { + /* Only need to read the Nearly Empty status register for + * queues 32-63 as for therse queues the interrtupt source + * condition is fixed to Nearly Empty + */ + regAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_QUEUPPSTAT0_OFFSET); + ixQMgrAqmIfWordRead (regAddress, qStatusWords); + } +} + + +/* + * This function check if the status for a queue has changed between + * 2 snapshots and if it has, that the status matches a particular + * value after masking. + */ +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfQStatusCheck (UINT32 *oldQStatusWords, + UINT32 *newQStatusWords, + unsigned int statusWordOffset, + UINT32 checkValue, + UINT32 mask) +{ + if (((oldQStatusWords[statusWordOffset] & mask) != + (newQStatusWords[statusWordOffset] & mask)) && + ((newQStatusWords[statusWordOffset] & mask) == checkValue)) + { + return TRUE; + } + + return FALSE; +} + +/* + * The AQM interrupt register contains a bit for each AQM queue + * specifying the queue (s) that cause an interrupt to fire. This + * function is called by IxQMgrDispatcher component. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQInterruptRegRead (IxQMgrDispatchGroup group, + UINT32 *regVal) +{ + volatile UINT32 *regAddress; + + if (group == IX_QMGR_QUELOW_GROUP) + { + regAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_QINTREG0_OFFSET); + } + else + { + regAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_QINTREG1_OFFSET); + } + + ixQMgrAqmIfWordRead (regAddress, regVal); +} + +/* + * The AQM interrupt enable register contains a bit for each AQM queue. + * This function reads the interrupt enable register. This + * function is called by IxQMgrDispatcher component. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQInterruptEnableRegRead (IxQMgrDispatchGroup group, + UINT32 *regVal) +{ + volatile UINT32 *regAddress; + + if (group == IX_QMGR_QUELOW_GROUP) + { + regAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_QUEIEREG0_OFFSET); + } + else + { + regAddress = (UINT32*)(aqmBaseAddress + + IX_QMGR_QUEIEREG1_OFFSET); + } + + ixQMgrAqmIfWordRead (regAddress, regVal); +} + + +/* + * This inline function will read the status bit of a queue + * specified by qId. If reset is TRUE the bit is cleared. + */ +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfRegisterBitCheck (IxQMgrQId qId, + UINT32 registerBaseAddrOffset, + unsigned queuesPerRegWord, + unsigned relativeBitOffset, + BOOL reset) +{ + UINT32 actualBitOffset; + volatile UINT32 *registerAddress; + UINT32 registerWord; + + /* + * Calculate the registerAddress + * multiple queues split accross registers + */ + registerAddress = (UINT32*)(aqmBaseAddress + + registerBaseAddrOffset + + ((qId / queuesPerRegWord) * + IX_QMGR_NUM_BYTES_PER_WORD)); + + /* + * Get the status word + */ + ixQMgrAqmIfWordRead (registerAddress, ®isterWord); + + /* + * Calculate the actualBitOffset + * status for multiple queues stored in one register + */ + actualBitOffset = (relativeBitOffset + 1) << + ((qId & (queuesPerRegWord - 1)) * (BITS_PER_WORD / queuesPerRegWord)); + + /* Check if the status bit is set */ + if (registerWord & actualBitOffset) + { + /* Clear the bit if reset */ + if (reset) + { + ixQMgrAqmIfWordWrite (registerAddress, registerWord & (~actualBitOffset)); + } + return TRUE; + } + + /* Bit not set */ + return FALSE; +} + + +/* + * @ingroup IxQmgrAqmIfAPI + * + * @brief Read the underflow status of a queue + * + * This inline function will read the underflow status of a queue + * specified by qId. + * + */ +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfUnderflowCheck (IxQMgrQId qId) +{ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + return (ixQMgrAqmIfRegisterBitCheck (qId, + IX_QMGR_QUEUOSTAT0_OFFSET, + IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD, + IX_QMGR_UNDERFLOW_BIT_OFFSET, + TRUE/*reset*/)); + } + else + { + /* Qs 32-63 have no underflow status */ + return FALSE; + } +} + +/* + * This inline function will read the overflow status of a queue + * specified by qId. + */ +IX_QMGR_AQMIF_INLINE BOOL +ixQMgrAqmIfOverflowCheck (IxQMgrQId qId) +{ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + return (ixQMgrAqmIfRegisterBitCheck (qId, + IX_QMGR_QUEUOSTAT0_OFFSET, + IX_QMGR_QUEUOSTAT_NUM_QUE_PER_WORD, + IX_QMGR_OVERFLOW_BIT_OFFSET, + TRUE/*reset*/)); + } + else + { + /* Qs 32-63 have no overflow status */ + return FALSE; + } +} + +/* + * This inline function will read the status bits of a queue + * specified by qId. + */ +IX_QMGR_AQMIF_INLINE UINT32 +ixQMgrAqmIfQRegisterBitsRead (IxQMgrQId qId, + UINT32 registerBaseAddrOffset, + unsigned queuesPerRegWord) +{ + volatile UINT32 *registerAddress; + UINT32 registerWord; + UINT32 statusBitsMask; + UINT32 bitsPerQueue; + + bitsPerQueue = BITS_PER_WORD / queuesPerRegWord; + + /* + * Calculate the registerAddress + * multiple queues split accross registers + */ + registerAddress = (UINT32*)(aqmBaseAddress + + registerBaseAddrOffset + + ((qId / queuesPerRegWord) * + IX_QMGR_NUM_BYTES_PER_WORD)); + /* + * Read the status word + */ + ixQMgrAqmIfWordRead (registerAddress, ®isterWord); + + + /* + * Calculate the mask for the status bits for this queue. + */ + statusBitsMask = ((1 << bitsPerQueue) - 1); + + /* + * Shift the status word so it is right justified + */ + registerWord >>= ((qId & (queuesPerRegWord - 1)) * bitsPerQueue); + + /* + * Mask out all bar the status bits for this queue + */ + return (registerWord &= statusBitsMask); +} + +/* + * This function is called by IxQMgrDispatcher to set the contents of + * the AQM interrupt register. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQInterruptRegWrite (IxQMgrDispatchGroup group, + UINT32 reg) +{ + volatile UINT32 *address; + + if (group == IX_QMGR_QUELOW_GROUP) + { + address = (UINT32*)(aqmBaseAddress + + IX_QMGR_QINTREG0_OFFSET); + } + else + { + address = (UINT32*)(aqmBaseAddress + + IX_QMGR_QINTREG1_OFFSET); + } + + ixQMgrAqmIfWordWrite (address, reg); +} + +/* + * Read the status of a queue in the range 0-31. + * + * This function is used by other QMgr components to read the + * status of the queue specified by qId. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQueLowStatRead (IxQMgrQId qId, + IxQMgrQStatus *status) +{ + /* Read the general status bits */ + *status = ixQMgrAqmIfQRegisterBitsRead (qId, + IX_QMGR_QUELOWSTAT0_OFFSET, + IX_QMGR_QUELOWSTAT_NUM_QUE_PER_WORD); +} + +/* + * This function will read the status of the queue specified + * by qId. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQueUppStatRead (IxQMgrQId qId, + IxQMgrQStatus *status) +{ + /* Reset the status bits */ + *status = 0; + + /* + * Check if the queue is nearly empty, + * N.b. QUPP stat register contains status for regs 32-63 at each + * bit position so subtract 32 to get bit offset + */ + if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID), + IX_QMGR_QUEUPPSTAT0_OFFSET, + IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD, + 0/*relativeBitOffset*/, + FALSE/*!reset*/)) + { + *status |= IX_QMGR_Q_STATUS_NE_BIT_MASK; + } + + /* + * Check if the queue is full, + * N.b. QUPP stat register contains status for regs 32-63 at each + * bit position so subtract 32 to get bit offset + */ + if (ixQMgrAqmIfRegisterBitCheck ((qId - IX_QMGR_MIN_QUEUPP_QID), + IX_QMGR_QUEUPPSTAT1_OFFSET, + IX_QMGR_QUEUPPSTAT_NUM_QUE_PER_WORD, + 0/*relativeBitOffset*/, + FALSE/*!reset*/)) + { + *status |= IX_QMGR_Q_STATUS_F_BIT_MASK; + } +} + +/* + * This function is used by other QMgr components to read the + * status of the queue specified by qId. + */ +IX_QMGR_AQMIF_INLINE void +ixQMgrAqmIfQueStatRead (IxQMgrQId qId, + IxQMgrQStatus *qStatus) +{ + if (qId < IX_QMGR_MIN_QUEUPP_QID) + { + ixQMgrAqmIfQueLowStatRead (qId, qStatus); + } + else + { + ixQMgrAqmIfQueUppStatRead (qId, qStatus); + } +} + + +/* + * This function performs a mod division + */ +IX_QMGR_AQMIF_INLINE unsigned +ixQMgrAqmIfPow2NumDivide (unsigned numerator, + unsigned denominator) +{ + /* Number is evenly divisable by 2 */ + return (numerator >> ixQMgrAqmIfLog2 (denominator)); +} + +/* Restore IX_COMPONENT_NAME */ +#undef IX_COMPONENT_NAME +#define IX_COMPONENT_NAME IX_QMGR_AQMIF_SAVED_COMPONENT_NAME + +#endif/*IXQMGRAQMIF_P_H*/ diff --git a/drivers/net/npe/include/IxQMgrDefines_p.h b/drivers/net/npe/include/IxQMgrDefines_p.h new file mode 100644 index 0000000000..0183596af5 --- /dev/null +++ b/drivers/net/npe/include/IxQMgrDefines_p.h @@ -0,0 +1,55 @@ +/** + * @file IxQMgrDefines_p.h + * + * @author Intel Corporation + * @date 19-Jul-2002 + * + * @brief IxQMgr Defines and tuneable constants + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#ifndef IXQMGRDEFINES_P_H +#define IXQMGRDEFINES_P_H + +#define IX_QMGR_PARM_CHECKS_ENABLED 1 +#define IX_QMGR_STATS_UPDATE_ENABLED 1 + +#endif /* IXQMGRDEFINES_P_H */ diff --git a/drivers/net/npe/include/IxQMgrDispatcher_p.h b/drivers/net/npe/include/IxQMgrDispatcher_p.h new file mode 100644 index 0000000000..71a3f8588e --- /dev/null +++ b/drivers/net/npe/include/IxQMgrDispatcher_p.h @@ -0,0 +1,106 @@ +/** + * @file IxQMgrDispatcher_p.h + * + * @author Intel Corporation + * @date 07-Feb-2002 + * + * @brief This file contains the internal functions for dispatcher + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#ifndef IXQMGRDISPATCHER_P_H +#define IXQMGRDISPATCHER_P_H + +/* + * User defined include files + */ +#include "IxQMgr.h" + +/* + * This structure defines the statistic data for a queue + */ +typedef struct +{ + unsigned callbackCnt; /* Call count of callback */ + unsigned priorityChangeCnt; /* Priority change count */ + unsigned intNoCallbackCnt; /* Interrupt fired but no callback set count */ + unsigned intLostCallbackCnt; /* Interrupt lost and detected ; SCR541 */ + BOOL notificationEnabled; /* Interrupt enabled for this queue */ + IxQMgrSourceId srcSel; /* interrupt source */ + unsigned enableCount; /* num times notif enabled by LLP */ + unsigned disableCount; /* num of times notif disabled by LLP */ +} IxQMgrDispatcherQStats; + +/* + * This structure defines statistic data for the disatcher + */ +typedef struct + { + unsigned loopRunCnt; /* ixQMgrDispatcherLoopRun count */ + + IxQMgrDispatcherQStats queueStats[IX_QMGR_MAX_NUM_QUEUES]; + +} IxQMgrDispatcherStats; + +/* + * Initialise the dispatcher component + */ +void +ixQMgrDispatcherInit (void); + +/* + * Get the dispatcher statistics + */ +IxQMgrDispatcherStats* +ixQMgrDispatcherStatsGet (void); + +/** + * Retrieve the number of leading zero bits starting from the MSB + * This function is implemented as an (extremely fast) asm routine + * for XSCALE processor (see clz instruction) and as a (slower) C + * function for other systems. + */ +unsigned int +ixQMgrCountLeadingZeros(unsigned int value); + +#endif/*IXQMGRDISPATCHER_P_H*/ + + diff --git a/drivers/net/npe/include/IxQMgrLog_p.h b/drivers/net/npe/include/IxQMgrLog_p.h new file mode 100644 index 0000000000..6b685b8a28 --- /dev/null +++ b/drivers/net/npe/include/IxQMgrLog_p.h @@ -0,0 +1,124 @@ +/** + * @file IxQMgrLog_p.h + * + * @author Intel Corporation + * @date 07-Feb-2002 + * + * @brief This file contains the internal functions for config + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#ifndef IXQMGRLOG_P_H +#define IXQMGRLOG_P_H + +/* + * User defined header files + */ +#include "IxOsal.h" + +/* + * Macros + */ + +#define IX_QMGR_LOG0(string) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, 0, 0, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG1(string, arg1) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, 0, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG2(string, arg1, arg2) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG3(string, arg1, arg2, arg3) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, (int)arg3, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG6(string, arg1, arg2, arg3, arg4, arg5, arg6) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_USER, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, (int)arg3, (int)arg4, (int)arg5, (int)arg6); \ +}while(0); + +#define IX_QMGR_LOG_WARNING0(string) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, string, 0, 0, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG_WARNING1(string, arg1) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, 0, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG_WARNING2(string, arg1, arg2) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_WARNING, IX_OSAL_LOG_DEV_STDOUT, string, (int)arg1, (int)arg2, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG_ERROR0(string) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, 0, 0, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG_ERROR1(string, arg1) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, (int)arg1, 0, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG_ERROR2(string, arg1, arg2) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, (int)arg1, (int)arg2, 0, 0, 0, 0);\ +}while(0); + +#define IX_QMGR_LOG_ERROR3(string, arg1, arg2, arg3) do\ +{\ + ixOsalLog(IX_OSAL_LOG_LVL_ERROR, IX_OSAL_LOG_DEV_STDERR, string, (int)arg1, (int)arg2, (int)arg3, 0, 0, 0);\ +}while(0); +#endif /* IX_QMGRLOG_P_H */ + + + + diff --git a/drivers/net/npe/include/IxQMgrQAccess_p.h b/drivers/net/npe/include/IxQMgrQAccess_p.h new file mode 100644 index 0000000000..8612670a17 --- /dev/null +++ b/drivers/net/npe/include/IxQMgrQAccess_p.h @@ -0,0 +1,96 @@ +/** + * @file IxQMgrQAccess_p.h + * + * @author Intel Corporation + * @date 30-Oct-2001 + * + * @brief QAccess private header file + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#ifndef IXQMGRQACCESS_P_H +#define IXQMGRQACCESS_P_H + +/* + * User defined header files + */ +#include "IxQMgr.h" + +/* + * Global variables declarations. + */ +extern volatile UINT32 * ixQMgrAqmIfQueAccRegAddr[]; + +/* + * Initialise the Queue Access component + */ +void +ixQMgrQAccessInit (void); + +/* + * read the remainder of a multi-word queue entry + * (the first word is already read) + */ +IX_STATUS +ixQMgrQReadMWordsMinus1 (IxQMgrQId qId, + UINT32 *entry); + +/* + * Fast access : pop a q entry from a single word queue + */ +extern __inline__ UINT32 ixQMgrQAccessPop(IxQMgrQId qId); + +extern __inline__ UINT32 ixQMgrQAccessPop(IxQMgrQId qId) +{ + return *(ixQMgrAqmIfQueAccRegAddr[qId]); +} + +/* + * Fast access : push a q entry in a single word queue + */ +extern __inline__ void ixQMgrQAccessPush(IxQMgrQId qId, UINT32 entry); + +extern __inline__ void ixQMgrQAccessPush(IxQMgrQId qId, UINT32 entry) +{ + *(ixQMgrAqmIfQueAccRegAddr[qId]) = entry; +} + +#endif/*IXQMGRQACCESS_P_H*/ diff --git a/drivers/net/npe/include/IxQMgrQCfg_p.h b/drivers/net/npe/include/IxQMgrQCfg_p.h new file mode 100644 index 0000000000..c9dae1ef04 --- /dev/null +++ b/drivers/net/npe/include/IxQMgrQCfg_p.h @@ -0,0 +1,122 @@ +/** + * @file IxQMgrQCfg_p.h + * + * @author Intel Corporation + * @date 07-Feb-2002 + * + * @brief This file contains the internal functions for config + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +#ifndef IXQMGRQCFG_P_H +#define IXQMGRQCFG_P_H + +/* + * User defined header files + */ +#include "IxQMgr.h" + +/* + * Typedefs + */ +typedef struct +{ + unsigned wmSetCnt; + + struct + { + char *qName; + BOOL isConfigured; + unsigned int qSizeInWords; + unsigned int qEntrySizeInWords; + unsigned int ne; + unsigned int nf; + unsigned int numEntries; + UINT32 baseAddress; + UINT32 readPtr; + UINT32 writePtr; + } qStats[IX_QMGR_MAX_NUM_QUEUES]; + +} IxQMgrQCfgStats; + +/* + * Initialize the QCfg subcomponent + */ +void +ixQMgrQCfgInit (void); + +/* + * Uninitialize the QCfg subcomponent + */ +void +ixQMgrQCfgUninit (void); + +/* + * Get the Q size in words + */ +IxQMgrQSizeInWords +ixQMgrQSizeInWordsGet (IxQMgrQId qId); + +/* + * Get the Q entry size in words + */ +IxQMgrQEntrySizeInWords +ixQMgrQEntrySizeInWordsGet (IxQMgrQId qId); + +/* + * Get the generic cfg stats + */ +IxQMgrQCfgStats* +ixQMgrQCfgStatsGet (void); + +/* + * Get queue specific stats + */ +IxQMgrQCfgStats* +ixQMgrQCfgQStatsGet (IxQMgrQId qId); + +/* + * Check is the queue configured + */ +BOOL +ixQMgrQIsConfigured(IxQMgrQId qId); + +#endif /* IX_QMGRQCFG_P_H */ diff --git a/drivers/net/npe/include/IxQueueAssignments.h b/drivers/net/npe/include/IxQueueAssignments.h new file mode 100644 index 0000000000..b65d621e3b --- /dev/null +++ b/drivers/net/npe/include/IxQueueAssignments.h @@ -0,0 +1,516 @@ +/** + * @file IxQueueAssignments.h + * + * @author Intel Corporation + * @date 29-Oct-2004 + * + * @brief Central definition for queue assignments + * + * Design Notes: + * This file contains queue assignments used by Ethernet (EthAcc), + * HSS (HssAcc), ATM (atmdAcc) and DMA (dmaAcc) access libraries. + * + * Note: Ethernet QoS traffic class definitions are managed separately + * by EthDB in IxEthDBQoS.h. + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +#ifndef IxQueueAssignments_H +#define IxQueueAssignments_H + +#include "IxQMgr.h" + +/*************************************************************************** + * Queue assignments for ATM + ***************************************************************************/ + +/** + * @brief Global compiler switch to select between 3 possible NPE Modes + * Define this macro to enable MPHY mode + * + * Default(No Switch) = MultiPHY Utopia2 + * IX_UTOPIAMODE = 1 for single Phy Utopia1 + * IX_MPHYSINGLEPORT = 1 for single Phy Utopia2 + */ +#define IX_NPE_MPHYMULTIPORT 1 +#if IX_UTOPIAMODE == 1 +#undef IX_NPE_MPHYMULTIPORT +#endif +#if IX_MPHYSINGLEPORT == 1 +#undef IX_NPE_MPHYMULTIPORT +#endif + +/** + * @def IX_NPE_A_TXDONE_QUEUE_HIGHWATERMARK + * + * @brief The NPE reserves the High Watermark for its operation. But it must be set by the Xscale + */ +#define IX_NPE_A_TXDONE_QUEUE_HIGHWATERMARK 2 + +/** + * @def IX_NPE_A_QMQ_ATM_TX_DONE + * + * @brief Queue ID for ATM Transmit Done queue + */ +#define IX_NPE_A_QMQ_ATM_TX_DONE IX_QMGR_QUEUE_1 + +/** + * @def IX_NPE_A_QMQ_ATM_TX0 + * + * @brief Queue ID for ATM transmit Queue in a single phy configuration + */ +#define IX_NPE_A_QMQ_ATM_TX0 IX_QMGR_QUEUE_2 + + +/** + * @def IX_NPE_A_QMQ_ATM_TXID_MIN + * + * @brief Queue Manager Queue ID for ATM transmit Queue with minimum number of queue + * + */ + +/** + * @def IX_NPE_A_QMQ_ATM_TXID_MAX + * + * @brief Queue Manager Queue ID for ATM transmit Queue with maximum number of queue + * + */ + +/** + * @def IX_NPE_A_QMQ_ATM_RX_HI + * + * @brief Queue Manager Queue ID for ATM Receive high Queue + * + */ + +/** + * @def IX_NPE_A_QMQ_ATM_RX_LO + * + * @brief Queue Manager Queue ID for ATM Receive low Queue + */ + +#ifdef IX_NPE_MPHYMULTIPORT +/** + * @def IX_NPE_A_QMQ_ATM_TX1 + * + * @brief Queue ID for ATM transmit Queue Multiphy from 1 to 11 + */ +#define IX_NPE_A_QMQ_ATM_TX1 IX_NPE_A_QMQ_ATM_TX0+1 +#define IX_NPE_A_QMQ_ATM_TX2 IX_NPE_A_QMQ_ATM_TX1+1 +#define IX_NPE_A_QMQ_ATM_TX3 IX_NPE_A_QMQ_ATM_TX2+1 +#define IX_NPE_A_QMQ_ATM_TX4 IX_NPE_A_QMQ_ATM_TX3+1 +#define IX_NPE_A_QMQ_ATM_TX5 IX_NPE_A_QMQ_ATM_TX4+1 +#define IX_NPE_A_QMQ_ATM_TX6 IX_NPE_A_QMQ_ATM_TX5+1 +#define IX_NPE_A_QMQ_ATM_TX7 IX_NPE_A_QMQ_ATM_TX6+1 +#define IX_NPE_A_QMQ_ATM_TX8 IX_NPE_A_QMQ_ATM_TX7+1 +#define IX_NPE_A_QMQ_ATM_TX9 IX_NPE_A_QMQ_ATM_TX8+1 +#define IX_NPE_A_QMQ_ATM_TX10 IX_NPE_A_QMQ_ATM_TX9+1 +#define IX_NPE_A_QMQ_ATM_TX11 IX_NPE_A_QMQ_ATM_TX10+1 +#define IX_NPE_A_QMQ_ATM_TXID_MIN IX_NPE_A_QMQ_ATM_TX0 +#define IX_NPE_A_QMQ_ATM_TXID_MAX IX_NPE_A_QMQ_ATM_TX11 +#define IX_NPE_A_QMQ_ATM_RX_HI IX_QMGR_QUEUE_21 +#define IX_NPE_A_QMQ_ATM_RX_LO IX_QMGR_QUEUE_22 +#else +#define IX_NPE_A_QMQ_ATM_TXID_MIN IX_NPE_A_QMQ_ATM_TX0 +#define IX_NPE_A_QMQ_ATM_TXID_MAX IX_NPE_A_QMQ_ATM_TX0 +#define IX_NPE_A_QMQ_ATM_RX_HI IX_QMGR_QUEUE_10 +#define IX_NPE_A_QMQ_ATM_RX_LO IX_QMGR_QUEUE_11 +#endif /* MPHY */ + +/** + * @def IX_NPE_A_QMQ_ATM_FREE_VC0 + * + * @brief Hardware QMgr Queue ID for ATM Free VC Queue. + * + * There are 32 Hardware QMgr Queue ID; from IX_NPE_A_QMQ_ATM_FREE_VC1 to + * IX_NPE_A_QMQ_ATM_FREE_VC30 + */ +#define IX_NPE_A_QMQ_ATM_FREE_VC0 IX_QMGR_QUEUE_32 +#define IX_NPE_A_QMQ_ATM_FREE_VC1 IX_NPE_A_QMQ_ATM_FREE_VC0+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC2 IX_NPE_A_QMQ_ATM_FREE_VC1+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC3 IX_NPE_A_QMQ_ATM_FREE_VC2+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC4 IX_NPE_A_QMQ_ATM_FREE_VC3+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC5 IX_NPE_A_QMQ_ATM_FREE_VC4+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC6 IX_NPE_A_QMQ_ATM_FREE_VC5+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC7 IX_NPE_A_QMQ_ATM_FREE_VC6+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC8 IX_NPE_A_QMQ_ATM_FREE_VC7+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC9 IX_NPE_A_QMQ_ATM_FREE_VC8+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC10 IX_NPE_A_QMQ_ATM_FREE_VC9+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC11 IX_NPE_A_QMQ_ATM_FREE_VC10+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC12 IX_NPE_A_QMQ_ATM_FREE_VC11+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC13 IX_NPE_A_QMQ_ATM_FREE_VC12+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC14 IX_NPE_A_QMQ_ATM_FREE_VC13+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC15 IX_NPE_A_QMQ_ATM_FREE_VC14+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC16 IX_NPE_A_QMQ_ATM_FREE_VC15+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC17 IX_NPE_A_QMQ_ATM_FREE_VC16+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC18 IX_NPE_A_QMQ_ATM_FREE_VC17+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC19 IX_NPE_A_QMQ_ATM_FREE_VC18+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC20 IX_NPE_A_QMQ_ATM_FREE_VC19+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC21 IX_NPE_A_QMQ_ATM_FREE_VC20+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC22 IX_NPE_A_QMQ_ATM_FREE_VC21+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC23 IX_NPE_A_QMQ_ATM_FREE_VC22+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC24 IX_NPE_A_QMQ_ATM_FREE_VC23+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC25 IX_NPE_A_QMQ_ATM_FREE_VC24+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC26 IX_NPE_A_QMQ_ATM_FREE_VC25+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC27 IX_NPE_A_QMQ_ATM_FREE_VC26+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC28 IX_NPE_A_QMQ_ATM_FREE_VC27+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC29 IX_NPE_A_QMQ_ATM_FREE_VC28+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC30 IX_NPE_A_QMQ_ATM_FREE_VC29+1 +#define IX_NPE_A_QMQ_ATM_FREE_VC31 IX_NPE_A_QMQ_ATM_FREE_VC30+1 + +/** + * @def IX_NPE_A_QMQ_ATM_RXFREE_MIN + * + * @brief The minimum queue ID for FreeVC queue + */ +#define IX_NPE_A_QMQ_ATM_RXFREE_MIN IX_NPE_A_QMQ_ATM_FREE_VC0 + +/** + * @def IX_NPE_A_QMQ_ATM_RXFREE_MAX + * + * @brief The maximum queue ID for FreeVC queue + */ +#define IX_NPE_A_QMQ_ATM_RXFREE_MAX IX_NPE_A_QMQ_ATM_FREE_VC31 + +/** + * @def IX_NPE_A_QMQ_OAM_FREE_VC + * @brief OAM Rx Free queue ID + */ +#ifdef IX_NPE_MPHYMULTIPORT +#define IX_NPE_A_QMQ_OAM_FREE_VC IX_QMGR_QUEUE_14 +#else +#define IX_NPE_A_QMQ_OAM_FREE_VC IX_QMGR_QUEUE_3 +#endif /* MPHY */ + +/**************************************************************************** + * Queue assignments for HSS + ****************************************************************************/ + +/**** HSS Port 0 ****/ + +/** + * @def IX_NPE_A_QMQ_HSS0_CHL_RX_TRIG + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Channelized Receive trigger + */ +#define IX_NPE_A_QMQ_HSS0_CHL_RX_TRIG IX_QMGR_QUEUE_12 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_RX + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive + */ +#define IX_NPE_A_QMQ_HSS0_PKT_RX IX_QMGR_QUEUE_13 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_TX0 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 0 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_TX0 IX_QMGR_QUEUE_14 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_TX1 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 1 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_TX1 IX_QMGR_QUEUE_15 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_TX2 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 2 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_TX2 IX_QMGR_QUEUE_16 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_TX3 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit queue 3 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_TX3 IX_QMGR_QUEUE_17 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE0 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 0 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE0 IX_QMGR_QUEUE_18 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE1 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 1 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE1 IX_QMGR_QUEUE_19 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE2 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 2 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE2 IX_QMGR_QUEUE_20 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_RX_FREE3 + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Receive Free queue 3 + */ +#define IX_NPE_A_QMQ_HSS0_PKT_RX_FREE3 IX_QMGR_QUEUE_21 + +/** + * @def IX_NPE_A_QMQ_HSS0_PKT_TX_DONE + * + * @brief Hardware QMgr Queue ID for HSS Port 0 Packetized Transmit Done queue + */ +#define IX_NPE_A_QMQ_HSS0_PKT_TX_DONE IX_QMGR_QUEUE_22 + +/**** HSS Port 1 ****/ + +/** + * @def IX_NPE_A_QMQ_HSS1_CHL_RX_TRIG + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Channelized Receive trigger + */ +#define IX_NPE_A_QMQ_HSS1_CHL_RX_TRIG IX_QMGR_QUEUE_10 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_RX + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive + */ +#define IX_NPE_A_QMQ_HSS1_PKT_RX IX_QMGR_QUEUE_0 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_TX0 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 0 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_TX0 IX_QMGR_QUEUE_5 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_TX1 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 1 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_TX1 IX_QMGR_QUEUE_6 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_TX2 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 2 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_TX2 IX_QMGR_QUEUE_7 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_TX3 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit queue 3 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_TX3 IX_QMGR_QUEUE_8 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE0 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 0 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE0 IX_QMGR_QUEUE_1 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE1 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 1 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE1 IX_QMGR_QUEUE_2 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE2 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 2 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE2 IX_QMGR_QUEUE_3 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_RX_FREE3 + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Receive Free queue 3 + */ +#define IX_NPE_A_QMQ_HSS1_PKT_RX_FREE3 IX_QMGR_QUEUE_4 + +/** + * @def IX_NPE_A_QMQ_HSS1_PKT_TX_DONE + * + * @brief Hardware QMgr Queue ID for HSS Port 1 Packetized Transmit Done queue + */ +#define IX_NPE_A_QMQ_HSS1_PKT_TX_DONE IX_QMGR_QUEUE_9 + +/***************************************************************************************** + * Queue assignments for DMA + *****************************************************************************************/ + +#define IX_DMA_NPE_A_REQUEST_QID IX_QMGR_QUEUE_19 /**< Queue Id for NPE A DMA Request */ +#define IX_DMA_NPE_A_DONE_QID IX_QMGR_QUEUE_20 /**< Queue Id for NPE A DMA Done */ +#define IX_DMA_NPE_B_REQUEST_QID IX_QMGR_QUEUE_24 /**< Queue Id for NPE B DMA Request */ +#define IX_DMA_NPE_B_DONE_QID IX_QMGR_QUEUE_26 /**< Queue Id for NPE B DMA Done */ +#define IX_DMA_NPE_C_REQUEST_QID IX_QMGR_QUEUE_25 /**< Queue Id for NPE C DMA Request */ +#define IX_DMA_NPE_C_DONE_QID IX_QMGR_QUEUE_27 /**< Queue Id for NPE C DMA Done */ + + +/***************************************************************************************** + * Queue assignments for Ethernet + * + * Note: Rx queue definitions, which include QoS traffic class definitions + * are managed by EthDB and declared in IxEthDBQoS.h + *****************************************************************************************/ + +/** +* +* @def IX_ETH_ACC_RX_FRAME_ETH_Q +* +* @brief Eth0/Eth1 NPE Frame Receive Q. +* +* @note THIS IS NOT USED - the Rx queues are read from EthDB QoS configuration +* +*/ +#define IX_ETH_ACC_RX_FRAME_ETH_Q (IX_QMGR_QUEUE_4) + +/** +* +* @def IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q +* +* @brief Supply Rx Buffers Ethernet Q for NPEB - Eth 0 - Port 1 +* +*/ +#define IX_ETH_ACC_RX_FREE_BUFF_ENET0_Q (IX_QMGR_QUEUE_27) + +/** +* +* @def IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q +* +* @brief Supply Rx Buffers Ethernet Q for NPEC - Eth 1 - Port 2 +* +*/ +#define IX_ETH_ACC_RX_FREE_BUFF_ENET1_Q (IX_QMGR_QUEUE_28) + +/** +* +* @def IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q +* +* @brief Supply Rx Buffers Ethernet Q for NPEA - Eth 2 - Port 3 +* +*/ +#define IX_ETH_ACC_RX_FREE_BUFF_ENET2_Q (IX_QMGR_QUEUE_26) + + +/** +* +* @def IX_ETH_ACC_TX_FRAME_ENET0_Q +* +* @brief Submit frame Q for NPEB Eth 0 - Port 1 +* +*/ +#define IX_ETH_ACC_TX_FRAME_ENET0_Q (IX_QMGR_QUEUE_24) + + +/** +* +* @def IX_ETH_ACC_TX_FRAME_ENET1_Q +* +* @brief Submit frame Q for NPEC Eth 1 - Port 2 +* +*/ +#define IX_ETH_ACC_TX_FRAME_ENET1_Q (IX_QMGR_QUEUE_25) + +/** +* +* @def IX_ETH_ACC_TX_FRAME_ENET2_Q +* +* @brief Submit frame Q for NPEA Eth 2 - Port 3 +* +*/ +#define IX_ETH_ACC_TX_FRAME_ENET2_Q (IX_QMGR_QUEUE_23) + +/** +* +* @def IX_ETH_ACC_TX_FRAME_DONE_ETH_Q +* +* @brief Transmit complete Q for NPE Eth 0/1, Port 1&2 +* +*/ +#define IX_ETH_ACC_TX_FRAME_DONE_ETH_Q (IX_QMGR_QUEUE_31) + +/***************************************************************************************** + * Queue assignments for Crypto + *****************************************************************************************/ + +/** Crypto Service Request Queue */ +#define IX_CRYPTO_ACC_CRYPTO_REQ_Q (IX_QMGR_QUEUE_29) + +/** Crypto Service Done Queue */ +#define IX_CRYPTO_ACC_CRYPTO_DONE_Q (IX_QMGR_QUEUE_30) + +/** Crypto Req Q CB tag */ +#define IX_CRYPTO_ACC_CRYPTO_REQ_Q_CB_TAG (0) + +/** Crypto Done Q CB tag */ +#define IX_CRYPTO_ACC_CRYPTO_DONE_Q_CB_TAG (1) + +/** WEP Service Request Queue */ +#define IX_CRYPTO_ACC_WEP_REQ_Q (IX_QMGR_QUEUE_21) + +/** WEP Service Done Queue */ +#define IX_CRYPTO_ACC_WEP_DONE_Q (IX_QMGR_QUEUE_22) + +/** WEP Req Q CB tag */ +#define IX_CRYPTO_ACC_WEP_REQ_Q_CB_TAG (2) + +/** WEP Done Q CB tag */ +#define IX_CRYPTO_ACC_WEP_DONE_Q_CB_TAG (3) + +/** Number of queues allocate to crypto hardware accelerator services */ +#define IX_CRYPTO_ACC_NUM_OF_CRYPTO_Q (2) + +/** Number of queues allocate to WEP NPE services */ +#define IX_CRYPTO_ACC_NUM_OF_WEP_NPE_Q (2) + +/** Number of queues allocate to CryptoAcc component */ +#define IX_CRYPTO_ACC_NUM_OF_Q (IX_CRYPTO_ACC_NUM_OF_CRYPTO_Q + IX_CRYPTO_ACC_NUM_OF_WEP_NPE_Q) + +#endif /* IxQueueAssignments_H */ diff --git a/drivers/net/npe/include/IxSspAcc.h b/drivers/net/npe/include/IxSspAcc.h new file mode 100644 index 0000000000..35e7abf06f --- /dev/null +++ b/drivers/net/npe/include/IxSspAcc.h @@ -0,0 +1,1271 @@ +/** + * @file IxSspAcc.h + * + * @brief Header file for the IXP400 SSP Serial Port Access (IxSspAcc) + * + * @version $Revision: 0.1 $ + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxSspAcc IXP400 SSP Serial Port Access (IxSspAcc) API + * + * @brief IXP400 SSP Serial Port Access Public API + * + * @{ + */ +#ifndef IXSSPACC_H +#define IXSSPACC_H + +#ifdef __ixp46X + +#include "IxOsal.h" + +/* + * Section for enum + */ +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccDataSize + * + * @brief The data sizes in bits that are supported by the protocol + */ +typedef enum +{ + DATA_SIZE_TOO_SMALL = 0x2, + DATA_SIZE_4 = 0x3, + DATA_SIZE_5, + DATA_SIZE_6, + DATA_SIZE_7, + DATA_SIZE_8, + DATA_SIZE_9, + DATA_SIZE_10, + DATA_SIZE_11, + DATA_SIZE_12, + DATA_SIZE_13, + DATA_SIZE_14, + DATA_SIZE_15, + DATA_SIZE_16, + DATA_SIZE_TOO_BIG +} IxSspAccDataSize; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccPortStatus + * + * @brief The status of the SSP port to be set to enable/disable + */ +typedef enum +{ + SSP_PORT_DISABLE = 0x0, + SSP_PORT_ENABLE, + INVALID_SSP_PORT_STATUS +} IxSspAccPortStatus; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccFrameFormat + * + * @brief The frame format that is to be used - SPI, SSP, or Microwire + */ +typedef enum +{ + SPI_FORMAT = 0x0, + SSP_FORMAT, + MICROWIRE_FORMAT, + INVALID_FORMAT +} IxSspAccFrameFormat; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccClkSource + * + * @brief The source to produce the SSP serial clock + */ +typedef enum +{ + ON_CHIP_CLK = 0x0, + EXTERNAL_CLK, + INVALID_CLK_SOURCE +} IxSspAccClkSource; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccSpiSclkPhase + * + * @brief The SPI SCLK Phase: + * 0 - SCLK is inactive one cycle at the start of a frame and 1/2 cycle at the + * end of a frame. + * 1 - SCLK is inactive 1/2 cycle at the start of a frame and one cycle at the + * end of a frame. + */ +typedef enum +{ + START_ONE_END_HALF = 0x0, + START_HALF_END_ONE, + INVALID_SPI_PHASE +} IxSspAccSpiSclkPhase; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccSpiSclkPolarity + * + * @brief The SPI SCLK Polarity can be set to either low or high. + */ +typedef enum +{ + SPI_POLARITY_LOW = 0x0, + SPI_POLARITY_HIGH, + INVALID_SPI_POLARITY +} IxSspAccSpiSclkPolarity; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccMicrowireCtlWord + * + * @brief The Microwire control word can be either 8 or 16 bit. + */ +typedef enum +{ + MICROWIRE_8_BIT = 0x0, + MICROWIRE_16_BIT, + INVALID_MICROWIRE_CTL_WORD +} IxSspAccMicrowireCtlWord; + +/** + * @ingroup IxSspAcc + * + * @enum IxSspAccFifoThreshold + * + * @brief The threshold in frames (each frame is defined by IxSspAccDataSize) + * that can be set for the FIFO to trigger a threshold exceed when + * checking with the ExceedThresholdCheck functions or an interrupt + * when it is enabled. + */ +typedef enum +{ + FIFO_TSHLD_1 = 0x0, + FIFO_TSHLD_2, + FIFO_TSHLD_3, + FIFO_TSHLD_4, + FIFO_TSHLD_5, + FIFO_TSHLD_6, + FIFO_TSHLD_7, + FIFO_TSHLD_8, + FIFO_TSHLD_9, + FIFO_TSHLD_10, + FIFO_TSHLD_11, + FIFO_TSHLD_12, + FIFO_TSHLD_13, + FIFO_TSHLD_14, + FIFO_TSHLD_15, + FIFO_TSHLD_16, + INVALID_FIFO_TSHLD +} IxSspAccFifoThreshold; + +/** + * @ingroup IxSspAcc + * + * @enum IX_SSP_STATUS + * + * @brief The statuses that can be returned in a SSP Serial Port Access + */ +typedef enum +{ + IX_SSP_SUCCESS = IX_SUCCESS, /**< Success status */ + IX_SSP_FAIL, /**< Fail status */ + IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING, /**< + Rx FIFO Overrun handler is NULL. */ + IX_SSP_RX_FIFO_HANDLER_MISSING, /**< + Rx FIFO threshold hit or above handler is NULL + */ + IX_SSP_TX_FIFO_HANDLER_MISSING, /**< + Tx FIFO threshold hit or below handler is NULL + */ + IX_SSP_FIFO_NOT_EMPTY_FOR_SETTING_CTL_CMD, /**< + Tx FIFO not empty and therefore microwire + control command size setting is not allowed. */ + IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE, /**< + frame format selected is invalid. */ + IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE, /**< + data size selected is invalid. */ + IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE, /**< + source clock selected is invalid. */ + IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE, /**< + Tx FIFO threshold selected is invalid. */ + IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE, /**< + Rx FIFO threshold selected is invalid. */ + IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE, /**< + SPI phase selected is invalid. */ + IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE, /**< + SPI polarity selected is invalid. */ + IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE, /**< + Microwire control command selected is invalid + */ + IX_SSP_INT_UNBIND_FAIL, /**< Interrupt unbind fail to unbind SSP + interrupt */ + IX_SSP_INT_BIND_FAIL, /**< Interrupt bind fail during init */ + IX_SSP_RX_FIFO_NOT_EMPTY, /**< + Rx FIFO not empty while trying to change data + size. */ + IX_SSP_TX_FIFO_NOT_EMPTY, /**< + Rx FIFO not empty while trying to change data + size or microwire control command size. */ + IX_SSP_POLL_MODE_BLOCKING, /**< + poll mode selected blocks interrupt mode from + being selected. */ + IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD, /**< + Tx FIFO level hit or below threshold. */ + IX_SSP_TX_FIFO_EXCEED_THRESHOLD, /**< + Tx FIFO level exceeded threshold. */ + IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD, /**< + Rx FIFO level hit or exceeded threshold. */ + IX_SSP_RX_FIFO_BELOW_THRESHOLD, /**< + Rx FIFO level below threshold. */ + IX_SSP_BUSY, /**< SSP is busy. */ + IX_SSP_IDLE, /**< SSP is idle. */ + IX_SSP_OVERRUN_OCCURRED, /**< + SSP has experienced an overrun. */ + IX_SSP_NO_OVERRUN, /**< + SSP did not experience an overrun. */ + IX_SSP_NOT_SUPORTED, /**< hardware does not support SSP */ + IX_SSP_NOT_INIT, /**< SSP Access not intialized */ + IX_SSP_NULL_POINTER /**< parameter passed in is NULL */ +} IX_SSP_STATUS; + +/** + * @ingroup IxSspAcc + * + * @brief SSP Rx FIFO Overrun handler + * + * This function is called for the client to handle Rx FIFO Overrun that occurs + * in the SSP hardware + */ +typedef void (*RxFIFOOverrunHandler)(void); + +/** + * @ingroup IxSspAcc + * + * @brief SSP Rx FIFO Threshold hit or above handler + * + * This function is called for the client to handle Rx FIFO threshold hit or + * or above that occurs in the SSP hardware + */ +typedef void (*RxFIFOThresholdHandler)(void); + +/** + * @ingroup IxSspAcc + * + * @brief SSP Tx FIFO Threshold hit or below handler + * + * This function is called for the client to handle Tx FIFO threshold hit or + * or below that occurs in the SSP hardware + */ +typedef void (*TxFIFOThresholdHandler)(void); + + +/* + * Section for struct + */ +/** + * @ingroup IxSspAcc + * + * @brief contains all the variables required to initialize the SSP serial port + * hardware. + * + * Structure to be filled and used for calling initialization + */ +typedef struct +{ + IxSspAccFrameFormat FrameFormatSelected;/**<Select between SPI, SSP and + Microwire. */ + IxSspAccDataSize DataSizeSelected; /**<Select between 4 and 16. */ + IxSspAccClkSource ClkSourceSelected; /**<Select clock source to be + on-chip or external. */ + IxSspAccFifoThreshold TxFIFOThresholdSelected; + /**<Select Tx FIFO threshold + between 1 to 16. */ + IxSspAccFifoThreshold RxFIFOThresholdSelected; + /**<Select Rx FIFO threshold + between 1 to 16. */ + BOOL RxFIFOIntrEnable; /**<Enable/disable Rx FIFO + threshold interrupt. Disabling + this interrupt will require + the use of the polling function + RxFIFOExceedThresholdCheck. */ + BOOL TxFIFOIntrEnable; /**<Enable/disable Tx FIFO + threshold interrupt. Disabling + this interrupt will require + the use of the polling function + TxFIFOExceedThresholdCheck. */ + RxFIFOThresholdHandler RxFIFOThsldHdlr; /**<Pointer to function to handle + a Rx FIFO interrupt. */ + TxFIFOThresholdHandler TxFIFOThsldHdlr; /**<Pointer to function to handle + a Tx FIFO interrupt. */ + RxFIFOOverrunHandler RxFIFOOverrunHdlr; /**<Pointer to function to handle + a Rx FIFO overrun interrupt. */ + BOOL LoopbackEnable; /**<Select operation mode to be + normal or loopback mode. */ + IxSspAccSpiSclkPhase SpiSclkPhaseSelected; + /**<Select SPI SCLK phase to start + with one inactive cycle and end + with 1/2 inactive cycle or + start with 1/2 inactive cycle + and end with one inactive + cycle. (Only used in + SPI format). */ + IxSspAccSpiSclkPolarity SpiSclkPolaritySelected; + /**<Select SPI SCLK idle state + to be low or high. (Only used in + SPI format). */ + IxSspAccMicrowireCtlWord MicrowireCtlWordSelected; + /**<Select Microwire control + format to be 8 or 16-bit. (Only + used in Microwire format). */ + UINT8 SerialClkRateSelected; /**<Select between 0 (1.8432Mbps) + and 255 (7.2Kbps). The + formula used is Bit rate = + 3.6864x10^6 / + (2 x (SerialClkRateSelect + 1)) + */ +} IxSspInitVars; + +/** + * @ingroup IxSspAcc + * + * @brief contains counters of the SSP statistics + * + * Structure contains all values of counters and associated overflows. + */ +typedef struct +{ + UINT32 ixSspRcvCounter; /**<Total frames received. */ + UINT32 ixSspXmitCounter; /**<Total frames transmitted. */ + UINT32 ixSspOverflowCounter;/**<Total occurrences of overflow. */ +} IxSspAccStatsCounters; + + +/* + * Section for prototypes interface functions + */ + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccInit ( + IxSspInitVars *initVarsSelected); + * + * @brief Initializes the SSP Access module. + * + * @param "IxSspAccInitVars [in] *initVarsSelected" - struct containing required + * variables for initialization + * + * Global Data : + * - None. + * + * This API will initialize the SSP Serial Port hardware to the user specified + * configuration. Then it will enable the SSP Serial Port. + * *NOTE*: Once interrupt or polling mode is selected, the mode cannot be + * changed via the interrupt enable/disable function but the init needs to be + * called again to change it. + * + * @return + * - IX_SSP_SUCCESS - Successfully initialize and enable the SSP + * serial port. + * - IX_SSP_RX_FIFO_HANDLER_MISSING - interrupt mode is selected but RX FIFO + * handler pointer is NULL + * - IX_SSP_TX_FIFO_HANDLER_MISSING - interrupt mode is selected but TX FIFO + * handler pointer is NULL + * - IX_SSP_RX_FIFO_OVERRUN_HANDLER_MISSING - interrupt mode is selected but + * RX FIFO Overrun handler pointer is NULL + * - IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not + * allowed. + * - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not + * allowed. + * - IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - frame format selected is invalid + * - IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - data size selected is invalid + * - IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - clock source selected is invalid + * - IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - Tx FIFO threshold level + * selected is invalid + * - IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - Rx FIFO threshold level + * selected is invalid + * - IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - SPI phase selected is invalid + * - IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - SPI polarity selected is invalid + * - IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - microwire control command + * size is invalid + * - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt + * - IX_SSP_INT_BIND_FAIL - interrupt handler failed to bind to SSP interrupt + * hardware trigger + * - IX_SSP_NOT_SUPORTED - hardware does not support SSP + * - IX_SSP_NULL_POINTER - parameter passed in is NULL + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccInit (IxSspInitVars *initVarsSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccUninit ( + void) + * + * @brief Un-initializes the SSP Serial Port Access component + * + * @param - None + * + * Global Data : + * - None. + * + * This API will disable the SSP Serial Port hardware. The client can call the + * init function again if they wish to enable the SSP. + * + * @return + * - IX_SSP_SUCCESS - successfully uninit SSP component + * - IX_SSP_INT_UNBIND_FAIL - interrupt handler failed to unbind SSP interrupt + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccUninit (void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccFIFODataSubmit ( + UINT16 *data, + UINT32 amtOfData) + * + * @brief Inserts data into the SSP Serial Port's FIFO + * + * @param "UINT16 [in] *data" - pointer to the location to transmit the data + * from + * "UINT32 [in] amtOfData" - number of data to be transmitted. + * + * Global Data : + * - None. + * + * This API will insert the amount of data specified by "amtOfData" from buffer + * pointed to by "data" into the FIFO to be transmitted by the hardware. + * + * @return + * - IX_SSP_SUCCESS - Data inserted successfully into FIFO + * - IX_SSP_FAIL - FIFO insufficient space + * - IX_SSP_NULL_POINTER - data pointer passed by client is NULL + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccFIFODataSubmit ( + UINT16* data, + UINT32 amtOfData); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccFIFODataReceive ( + UINT16 *data, + UINT32 amtOfData) + * + * @brief Extract data from the SSP Serial Port's FIFO + * + * @param "UINT16 [in] *data" - pointer to the location to receive the data into + * "UINT32 [in] amtOfData" - number of data to be received. + * + * Global Data : + * - None. + * + * This API will extract the amount of data specified by "amtOfData" from the + * FIFO already received by the hardware into the buffer pointed to by "data". + * + * @return + * - IX_SSP_SUCCESS - Data extracted successfully from FIFO + * - IX_SSP_FAIL - FIFO has no data + * - IX_SSP_NULL_POINTER - data pointer passed by client is NULL + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccFIFODataReceive ( + UINT16* data, + UINT32 amtOfData); + + +/** + * Polling Functions + */ + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccTxFIFOHitOrBelowThresholdCheck ( + void) + * + * @brief Check if the Tx FIFO threshold has been hit or fallen below. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will return whether the Tx FIFO threshold has been exceeded or not + * + * @return + * - IX_SSP_TX_FIFO_HIT_BELOW_THRESHOLD - Tx FIFO level hit or below threshold . + * - IX_SSP_TX_FIFO_EXCEED_THRESHOLD - Tx FIFO level exceeded threshold. + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccTxFIFOHitOrBelowThresholdCheck ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccRxFIFOHitOrAboveThresholdCheck ( + void) + * + * @brief Check if the Rx FIFO threshold has been hit or exceeded. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will return whether the Rx FIFO level is below threshold or not + * + * @return + * - IX_SSP_RX_FIFO_HIT_ABOVE_THRESHOLD - Rx FIFO level hit or exceeded threshold + * - IX_SSP_RX_FIFO_BELOW_THRESHOLD - Rx FIFO level below threshold + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccRxFIFOHitOrAboveThresholdCheck ( + void); + + +/** + * Configuration functions + * + * NOTE: These configurations are not required to be called once init is called + * unless configurations need to be changed on the fly. + */ + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccSSPPortStatusSet ( + IxSspAccPortStatus portStatusSelected) + * + * @brief Enables/disables the SSP Serial Port hardware. + * + * @param "IxSspAccPortStatus [in] portStatusSelected" - Set the SSP port to + * enable or disable + * + * Global Data : + * - None. + * + * This API will enable/disable the SSP Serial Port hardware. + * NOTE: This function is called by init to enable the SSP after setting up the + * configurations and by uninit to disable the SSP. + * + * @return + * - IX_SSP_SUCCESS - Port status set with valid enum value + * - IX_SSP_FAIL - invalid enum value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccSSPPortStatusSet ( + IxSspAccPortStatus portStatusSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccFrameFormatSelect ( + IxSspAccFrameFormat frameFormatSelected) + * + * @brief Sets the frame format for the SSP Serial Port hardware + * + * @param "IxSspAccFrameFormat [in] frameFormatSelected" - The frame format of + * SPI, SSP or Microwire can be selected as the format + * + * Global Data : + * - None. + * + * This API will set the format for the transfers via user input. + * *NOTE*: The SSP hardware will be disabled to clear the FIFOs. Then its + * previous state (enabled/disabled) restored after changing the format. + * + * @return + * - IX_SSP_SUCCESS - frame format set with valid enum value + * - IX_SSP_INVALID_FRAME_FORMAT_ENUM_VALUE - invalid frame format value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccFrameFormatSelect ( + IxSspAccFrameFormat frameFormatSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccDataSizeSelect ( + IxSspAccDataSize dataSizeSelected) + * + * @brief Sets the data size for transfers + * + * @param "IxSspAccDataSize [in] dataSizeSelected" - The data size between 4 + * and 16 that can be selected for data transfers + * + * Global Data : + * - None. + * + * This API will set the data size for the transfers via user input. It will + * disallow the change of the data size if either of the Rx/Tx FIFO is not + * empty to prevent data loss. + * *NOTE*: The SSP port will be disabled if the FIFOs are found to be empty and + * if between the check and disabling of the SSP (which clears the + * FIFOs) data is received into the FIFO, it might be lost. + * *NOTE*: The FIFOs can be cleared by disabling the SSP Port if necessary to + * force the data size change. + * + * @return + * - IX_SSP_SUCCESS - data size set with valid enum value + * - IX_SSP_RX_FIFO_NOT_EMPTY - Rx FIFO not empty, data size change is not + * allowed. + * - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not + * allowed. + * - IX_SSP_INVALID_DATA_SIZE_ENUM_VALUE - invalid enum value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccDataSizeSelect ( + IxSspAccDataSize dataSizeSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccClockSourceSelect( + IxSspAccClkSource clkSourceSelected) + * + * @brief Sets the clock source of the SSP Serial Port hardware + * + * @param "IxSspAccClkSource [in] clkSourceSelected" - The clock source from + * either external source on on-chip can be selected as the source + * + * Global Data : + * - None. + * + * This API will set the clock source for the transfers via user input. + * + * @return + * - IX_SSP_SUCCESS - clock source set with valid enum value + * - IX_SSP_INVALID_CLOCK_SOURCE_ENUM_VALUE - invalid enum value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccClockSourceSelect ( + IxSspAccClkSource clkSourceSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccSerialClockRateConfigure ( + UINT8 serialClockRateSelected) + * + * @brief Sets the on-chip Serial Clock Rate of the SSP Serial Port hardware. + * + * @param "UINT8 [in] serialClockRateSelected" - The serial clock rate that can + * be set is between 7.2Kbps and 1.8432Mbps. The formula used is + * Bit rate = 3.6864x10^6 / (2 x (SerialClockRateSelected + 1)) + * + * Global Data : + * - None. + * + * This API will set the serial clock rate for the transfers via user input. + * + * @return + * - IX_SSP_SUCCESS - Serial clock rate configured successfully + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccSerialClockRateConfigure ( + UINT8 serialClockRateSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccRxFIFOIntEnable ( + RxFIFOThresholdHandler rxFIFOIntrHandler) + * + * @brief Enables service request interrupt whenever the Rx FIFO hits its + * threshold + * + * @param "void [in] *rxFIFOIntrHandler(UINT32)" - function pointer to the + * interrupt handler for the Rx FIFO exceeded. + * + * Global Data : + * - None. + * + * This API will enable the service request interrupt for the Rx FIFO + * + * @return + * - IX_SSP_SUCCESS - Rx FIFO level interrupt enabled successfully + * - IX_SSP_RX_FIFO_HANDLER_MISSING - missing handler for Rx FIFO level interrupt + * - IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not + * allowed to be enabled. Use init to enable interrupt mode. + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccRxFIFOIntEnable ( + RxFIFOThresholdHandler rxFIFOIntrHandler); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccRxFIFOIntDisable ( + void) + * + * @brief Disables service request interrupt of the Rx FIFO. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will disable the service request interrupt of the Rx FIFO. + * + * @return + * - IX_SSP_SUCCESS - Rx FIFO Interrupt disabled successfully + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccRxFIFOIntDisable ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccTxFIFOIntEnable ( + TxFIFOThresholdHandler txFIFOIntrHandler) + * + * @brief Enables service request interrupt of the Tx FIFO. + * + * @param "void [in] *txFIFOIntrHandler(UINT32)" - function pointer to the + * interrupt handler for the Tx FIFO exceeded. + * + * Global Data : + * - None. + * + * This API will enable the service request interrupt of the Tx FIFO. + * + * @return + * - IX_SSP_SUCCESS - Tx FIFO level interrupt enabled successfully + * - IX_SSP_TX_FIFO_HANDLER_MISSING - missing handler for Tx FIFO level interrupt + * - IX_SSP_POLL_MODE_BLOCKING - poll mode is selected at init, interrupt not + * allowed to be enabled. Use init to enable interrupt mode. + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccTxFIFOIntEnable ( + TxFIFOThresholdHandler txFIFOIntrHandler); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccTxFIFOIntDisable ( + void) + * + * @brief Disables service request interrupt of the Tx FIFO + * + * @param - None + * + * Global Data : + * - None. + * + * This API will disable the service request interrupt of the Tx FIFO + * + * @return + * - IX_SSP_SUCCESS - Tx FIFO Interrupt disabled successfuly. + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccTxFIFOIntDisable ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccLoopbackEnable ( + BOOL loopbackEnable) + * + * @brief Enables/disables the loopback mode + * + * @param "BOOL [in] loopbackEnable" - True to enable and false to disable. + * + * Global Data : + * - None. + * + * This API will set the mode of operation to either loopback or normal mode + * according to the user input. + * + * @return + * - IX_SSP_SUCCESS - Loopback enabled successfully + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccLoopbackEnable ( + BOOL loopbackEnable); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccSpiSclkPolaritySet ( + IxSspAccSpiSclkPolarity spiSclkPolaritySelected) + * + * @brief Sets the SPI SCLK Polarity to Low or High + * + * @param - "IxSspAccSpiSclkPolarity [in] spiSclkPolaritySelected" - SPI SCLK + * polarity that can be selected to either high or low + * + * Global Data : + * - None. + * + * This API is only used for the SPI frame format and will set the SPI SCLK polarity + * to either low or high + * + * @return + * - IX_SSP_SUCCESS - SPI Sclk polarity set with valid enum value + * - IX_SSP_INVALID_SPI_POLARITY_ENUM_VALUE - invalid SPI polarity value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccSpiSclkPolaritySet ( + IxSspAccSpiSclkPolarity spiSclkPolaritySelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccSpiSclkPhaseSet ( + IxSspAccSpiSclkPhase spiSclkPhaseSelected) + * + * @brief Sets the SPI SCLK Phase + * + * @param "IxSspAccSpiSclkPhase [in] spiSclkPhaseSelected" - Phase of either + * the SCLK is inactive one cycle at the start of a frame and 1/2 + * cycle at the end of a frame, OR + * the SCLK is inactive 1/2 cycle at the start of a frame and one + * cycle at the end of a frame. + * + * Global Data : + * - IX_SSP_SUCCESS - SPI Sclk phase set with valid enum value + * - IX_SSP_INVALID_SPI_PHASE_ENUM_VALUE - invalid SPI phase value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * This API is only used for the SPI frame format and will set the SPI SCLK + * phase according to user input. + * + * @return + * - None + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccSpiSclkPhaseSet ( + IxSspAccSpiSclkPhase spiSclkPhaseSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccMicrowireControlWordSet ( + IxSspAccMicrowireCtlWord microwireCtlWordSelected) + * + * @brief Sets the Microwire control word to 8 or 16 bit format + * + * @param "IxSspAccMicrowireCtlWord [in] microwireCtlWordSelected" - Microwire + * control word format can be either 8 or 16 bit format + * + * Global Data : + * - None. + * + * This API is only used for the Microwire frame format and will set the + * control word to 8 or 16 bit format + * + * @return + * - IX_SSP_SUCCESS - Microwire Control Word set with valid enum value + * - IX_SSP_TX_FIFO_NOT_EMPTY - Tx FIFO not empty, data size change is not + * allowed. + * - IX_SSP_INVALID_MICROWIRE_CTL_CMD_ENUM_VALUE - invalid enum value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccMicrowireControlWordSet ( + IxSspAccMicrowireCtlWord microwireCtlWordSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccTxFIFOThresholdSet ( + IxSspAccFifoThreshold txFIFOThresholdSelected) + * + * @brief Sets the Tx FIFO Threshold. + * + * @param "IxSspAccFifoThreshold [in] txFIFOThresholdSelected" - Threshold that + * is set for a Tx FIFO service request to be triggered + * + * Global Data : + * - None. + * + * This API will set the threshold for a Tx FIFO threshold to be triggered + * + * @return + * - IX_SSP_SUCCESS - Tx FIFO Threshold set with valid enum value + * - IX_SSP_INVALID_TX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccTxFIFOThresholdSet ( + IxSspAccFifoThreshold txFIFOThresholdSelected); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccRxFIFOThresholdSet ( + IxSspAccFifoThreshold rxFIFOThresholdSelected) + * + * @brief Sets the Rx FIFO Threshold. + * + * @param "IxSspAccFifoThreshold [in] rxFIFOThresholdSelected" - Threshold that + * is set for a Tx FIFO service request to be triggered + * + * Global Data : + * - None. + * + * This API will will set the threshold for a Rx FIFO threshold to be triggered + * + * @return + * - IX_SSP_SUCCESS - Rx FIFO Threshold set with valid enum value + * - IX_SSP_INVALID_RX_FIFO_THRESHOLD_ENUM_VALUE - invalid enum value + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccRxFIFOThresholdSet ( + IxSspAccFifoThreshold rxFIFOThresholdSelected); + + +/** + * Debug functions + */ + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccStatsGet ( + IxSspAccStatsCounters *sspStats) + * + * @brief Returns the SSP Statistics through the pointer passed in + * + * @param "IxSspAccStatsCounters [in] *sspStats" - SSP statistics counter will + * be read and written to the location pointed by this pointer. + * + * Global Data : + * - None. + * + * This API will return the statistics counters of the SSP transfers. + * + * @return + * - IX_SSP_SUCCESS - Stats obtained into the pointer provided successfully + * - IX_SSP_FAIL - client provided pointer is NULL + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccStatsGet ( + IxSspAccStatsCounters *sspStats); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccStatsReset ( + void) + * + * @brief Resets the SSP Statistics + * + * @param - None + * + * Global Data : + * - None. + * + * This API will reset the SSP statistics counters. + * + * @return + * - None + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC void +ixSspAccStatsReset ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccShow ( + void) + * + * @brief Display SSP status registers and statistics counters. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will display the status registers of the SSP and the statistics + * counters. + * + * @return + * - IX_SSP_SUCCESS - SSP show called successfully. + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccShow ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccSSPBusyCheck ( + void) + * + * @brief Determine the state of the SSP serial port hardware. + * + * @param - None + * + * Global Data : + * - None. + * + * This API will return the state of the SSP serial port hardware - busy or + * idle + * + * @return + * - IX_SSP_BUSY - SSP is busy + * - IX_SSP_IDLE - SSP is idle. + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccSSPBusyCheck ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccTxFIFOLevelGet ( + void) + * + * @brief Obtain the Tx FIFO's level + * + * @param - None + * + * Global Data : + * - None. + * + * This API will return the level of the Tx FIFO + * + * @return + * - 0..16; 0 can also mean SSP not initialized and will need to be init. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC UINT8 +ixSspAccTxFIFOLevelGet ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccRxFIFOLevelGet ( + void) + * + * @brief Obtain the Rx FIFO's level + * + * @param - None + * + * Global Data : + * - None. + * + * This API will return the level of the Rx FIFO + * + * @return + * - 0..16; 0 can also mean SSP not initialized and will need to be init. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC UINT8 +ixSspAccRxFIFOLevelGet ( + void); + +/** + * @ingroup IxSspAcc + * + * @fn ixSspAccRxFIFOOverrunCheck ( + void) + * + * @brief Check if the Rx FIFO has overrun its FIFOs + * + * @param - None + * + * Global Data : + * - None. + * + * This API will return whether the Rx FIFO has overrun its 16 FIFOs + * + * @return + * - IX_SSP_OVERRUN_OCCURRED - Rx FIFO overrun occurred + * - IX_SSP_NO_OVERRUN - Rx FIFO did not overrun + * - IX_SSP_NOT_INIT - SSP not initialized. SSP init needs to be called. + * + * @li Reentrant : yes + * @li ISR Callable : yes + * + */ +PUBLIC IX_SSP_STATUS +ixSspAccRxFIFOOverrunCheck ( + void); + +#endif /* __ixp46X */ +#endif /* IXSSPACC_H */ diff --git a/drivers/net/npe/include/IxTimeSyncAcc.h b/drivers/net/npe/include/IxTimeSyncAcc.h new file mode 100644 index 0000000000..25effed90b --- /dev/null +++ b/drivers/net/npe/include/IxTimeSyncAcc.h @@ -0,0 +1,783 @@ +/** + * @file IxTimeSyncAcc.h + * + * @author Intel Corporation + * @date 07 May 2004 + * + * @brief Header file for IXP400 Access Layer to IEEE 1588(TM) Precision + * Clock Synchronisation Protocol Hardware Assist + * + * @version 1 + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxTimeSyncAcc IXP400 Time Sync Access Component API + * + * @brief Public API for IxTimeSyncAcc + * + * @{ + */ +#ifndef IXTIMESYNCACC_H +#define IXTIMESYNCACC_H + +#ifdef __ixp46X + +#include "IxOsal.h" + +/** + * Section for enum + */ + +/** + * @ingroup IxTimeSyncAcc + * + * @enum IxTimeSyncAccStatus + * + * @brief The status as returned from the API + */ +typedef enum /**< IxTimeSyncAccStatus */ +{ + IX_TIMESYNCACC_SUCCESS = IX_SUCCESS, /**< Requested operation successful */ + IX_TIMESYNCACC_INVALIDPARAM, /**< An invalid parameter was passed */ + IX_TIMESYNCACC_NOTIMESTAMP, /**< While polling no time stamp available */ + IX_TIMESYNCACC_INTERRUPTMODEINUSE, /**< Polling not allowed while operating in interrupt mode */ + IX_TIMESYNCACC_FAILED /**< Internal error occurred */ +}IxTimeSyncAccStatus; + +/** + * @ingroup IxTimeSyncAcc + * + * @enum IxTimeSyncAccAuxMode + * + * @brief Master or Slave Auxiliary Time Stamp (Snap Shot) + */ +typedef enum /**< IxTimeSyncAccAuxMode */ +{ + IX_TIMESYNCACC_AUXMODE_MASTER, /**< Auxiliary Master Mode */ + IX_TIMESYNCACC_AUXMODE_SLAVE, /**< Auxiliary Slave Mode */ + IX_TIMESYNCACC_AUXMODE_INVALID /**< Invalid Auxiliary Mode */ +}IxTimeSyncAccAuxMode; + +/** + * @ingroup IxTimeSyncAcc + * + * @enum IxTimeSyncAcc1588PTPPort + * + * @brief IEEE 1588 PTP Communication Port(Channel) + */ +typedef enum /**< IxTimeSyncAcc1588PTPPort */ +{ + IX_TIMESYNCACC_NPE_A_1588PTP_PORT, /**< PTP Communication Port on NPE-A */ + IX_TIMESYNCACC_NPE_B_1588PTP_PORT, /**< PTP Communication Port on NPE-B */ + IX_TIMESYNCACC_NPE_C_1588PTP_PORT, /**< PTP Communication Port on NPE-C */ + IX_TIMESYNCACC_NPE_1588PORT_INVALID /**< Invalid PTP Communication Port */ +} IxTimeSyncAcc1588PTPPort; + +/** + * @ingroup IxTimeSyncAcc + * + * @enum IxTimeSyncAcc1588PTPPortMode + * + * @brief Master or Slave mode for IEEE 1588 PTP Communication Port + */ +typedef enum /**< IxTimeSyncAcc1588PTPPortMode */ +{ + IX_TIMESYNCACC_1588PTP_PORT_MASTER, /**< PTP Communication Port in Master Mode */ + IX_TIMESYNCACC_1588PTP_PORT_SLAVE, /**< PTP Communication Port in Slave Mode */ + IX_TIMESYNCACC_1588PTP_PORT_ANYMODE, /**< PTP Communication Port in ANY Mode + allows time stamping of all messages + including non-1588 PTP */ + IX_TIMESYNCACC_1588PTP_PORT_MODE_INVALID /**< Invalid PTP Port Mode */ +}IxTimeSyncAcc1588PTPPortMode; + +/** + * @ingroup IxTimeSyncAcc + * + * @enum IxTimeSyncAcc1588PTPMsgType + * + * @brief 1588 PTP Messages types that can be detected on communication port + * + * Note that client code can determine this based on master/slave mode in which + * it is already operating in and this information is made available for the sake + * of convenience only. + */ +typedef enum /**< IxTimeSyncAcc1588PTPMsgType */ +{ + IX_TIMESYNCACC_1588PTP_MSGTYPE_SYNC, /**< PTP Sync message sent by Master or received by Slave */ + IX_TIMESYNCACC_1588PTP_MSGTYPE_DELAYREQ, /**< PTP Delay_Req message sent by Slave or received by Master */ + IX_TIMESYNCACC_1588PTP_MSGTYPE_UNKNOWN /**< Other PTP and non-PTP message sent or received by both + Master and/or Slave */ +} IxTimeSyncAcc1588PTPMsgType; + +/** + * Section for struct + */ + +/** + * @ingroup IxTimeSyncAcc + * + * @struct IxTimeSyncAccTimeValue + * + * @brief Struct to hold 64 bit SystemTime and TimeStamp values + */ +typedef struct /**< IxTimeSyncAccTimeValue */ +{ + UINT32 timeValueLowWord; /**< Lower 32 bits of the time value */ + UINT32 timeValueHighWord; /**< Upper 32 bits of the time value */ +} IxTimeSyncAccTimeValue; + +/** + * @ingroup IxTimeSyncAcc + * + * @struct IxTimeSyncAccUuid + * + * @brief Struct to hold 48 bit UUID values captured in Sync or Delay_Req messages + */ +typedef struct /**< IxTimeSyncAccUuid */ +{ + UINT32 uuidValueLowWord; /**<The lower 32 bits of the UUID */ + UINT16 uuidValueHighHalfword; /**<The upper 16 bits of the UUID */ +} IxTimeSyncAccUuid; + +/** + * @ingroup IxTimeSyncAcc + * + * @struct IxTimeSyncAccPtpMsgData + * + * @brief Struct for data from the PTP message returned when TimeStamp available + */ +typedef struct /**< IxTimeSyncAccPtpMsgData */ +{ + IxTimeSyncAcc1588PTPMsgType ptpMsgType; /**< PTP Messages type */ + IxTimeSyncAccTimeValue ptpTimeStamp; /**< 64 bit TimeStamp value from PTP Message */ + IxTimeSyncAccUuid ptpUuid; /**< 48 bit UUID value from the PTP Message */ + UINT16 ptpSequenceNumber; /**< 16 bit Sequence Number from PTP Message */ +} IxTimeSyncAccPtpMsgData; + +/** + * @ingroup IxTimeSyncAcc + * + * @struct IxTimeSyncAccStats + * + * @brief Statistics for the PTP messages + */ +typedef struct /**< IxTimeSyncAccStats */ +{ + UINT32 rxMsgs; /**< Count of timestamps for received PTP Messages */ + UINT32 txMsgs; /**< Count of timestamps for transmitted PTP Messages */ +} IxTimeSyncAccStats; + +/** + * @ingroup IxTimeSyncAcc + * + * @typedef IxTimeSyncAccTargetTimeCallback + * + * @brief Callback for use by target time stamp interrupt + */ +typedef void (*IxTimeSyncAccTargetTimeCallback)(IxTimeSyncAccTimeValue targetTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @typedef IxTimeSyncAccAuxTimeCallback + * + * @brief Callback for use by auxiliary time interrupts + */ +typedef void (*IxTimeSyncAccAuxTimeCallback)(IxTimeSyncAccAuxMode auxMode, + IxTimeSyncAccTimeValue auxTime); + +/* + * Section for prototypes interface functions + */ + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigSet( + IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAcc1588PTPPortMode ptpPortMode) + * + * @brief Configures the IEEE 1588 message detect on particular PTP port. + * + * @param ptpPort [in] - PTP port to config + * @param ptpPortMode [in]- Port to operate in Master or Slave mode + * + * This API will enable the time stamping on a particular PTP port. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccPTPPortConfigSet(IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAcc1588PTPPortMode ptpPortMode); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPPortConfigGet( + IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAcc1588PTPPortMode *ptpPortMode) + * + * @brief Retrieves IEEE 1588 PTP operation mode on particular PTP port. + * + * @param ptpPort [in] - PTP port + * @param ptpPortMode [in]- Mode of operation of PTP port (Master or Slave) + * + * This API will identify the time stamping capability of a PTP port by means + * of obtaining its mode of operation. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccPTPPortConfigGet(IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAcc1588PTPPortMode *ptpPortMode); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPRxPoll( + IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAccPtpMsgData *ptpMsgData) + * + * @brief Polls the IEEE 1588 message/time stamp detect status on a particular + * PTP Port on the Receive side. + * + * @param ptpPort [in] - PTP port to poll + * @param ptpMsgData [out] - Current TimeStamp and other Data + * + * This API will poll for the availability of a time stamp on the received Sync + * (Slave) or Delay_Req (Master) messages. + * The client application will provide the buffer. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccPTPRxPoll(IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAccPtpMsgData *ptpMsgData); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccPTPTxPoll( + IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAccPtpMsgData *ptpMsgData) + * + * + * @brief Polls the IEEE 1588 message/time stamp detect status on a particular + * PTP Port on the Transmit side. + * + * @param ptpPort [in] - PTP port to poll + * @param ptpMsgData [out] - Current TimeStamp and other Data + * + * This API will poll for the availability of a time stamp on the transmitted + * Sync (Master) or Delay_Req (Slave) messages. + * The client application will provide the buffer. + * + * @li Re-entrant : No + * @li ISR Callable : No + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_NOTIMESTAMP - No time stamp available + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccPTPTxPoll(IxTimeSyncAcc1588PTPPort ptpPort, + IxTimeSyncAccPtpMsgData *ptpMsgData); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeSet( + IxTimeSyncAccTimeValue systemTime) + * + * @brief Sets the System Time in the IEEE 1588 hardware assist block + * + * @param systemTime [in] - Value to set System Time + * + * This API will set the SystemTime to given value. + * + * @li Re-entrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccSystemTimeSet(IxTimeSyncAccTimeValue systemTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccSystemTimeGet( + IxTimeSyncAccTimeValue *systemTime) + * + * @brief Gets the System Time from the IEEE 1588 hardware assist block + * + * @param systemTime [out] - Copy the current System Time into the client + * application provided buffer + * + * This API will get the SystemTime from IEEE1588 block and return to client + * + * @li Re-entrant : no + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccSystemTimeGet(IxTimeSyncAccTimeValue *systemTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateSet( + UINT32 tickRate) + * + * @brief Sets the Tick Rate (Frequency Scaling Value) in the IEEE 1588 + * hardware assist block + * + * @param tickRate [in] - Value to set Tick Rate + * + * This API will set the Tick Rate (Frequency Scaling Value) in the IEEE + * 1588 block to the given value. The Accumulator register (not client + * visible) is incremented by this TickRate value every clock cycle. When + * the Accumulator overflows, the SystemTime is incremented by one. This + * TickValue can therefore be used to adjust the system timer. + * + * @li Re-entrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTickRateSet(UINT32 tickRate); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTickRateGet( + UINT32 *tickRate) + * + * @brief Gets the Tick Rate (Frequency Scaling Value) from the IEEE 1588 + * hardware assist block + * + * @param tickRate [out] - Current Tick Rate value in the IEEE 1588 block + * + * This API will get the TickRate on IEE15588 block. Refer to @ref + * ixTimeSyncAccTickRateSet for notes on usage of this value. + * + * @li Reentrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTickRateGet(UINT32 *tickRate); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptEnable( + IxTimeSyncAccTargetTimeCallback targetTimeCallback) + * + * @brief Enables the interrupt to verify the condition where the System Time + * greater or equal to the Target Time in the IEEE 1588 hardware assist block. + * If the condition is true an interrupt will be sent to XScale. + * + * @param targetTimeCallback [in] - Callback to be invoked when interrupt fires + * + * This API will enable the Target Time reached/hit condition interrupt. + * + * NOTE: The client application needs to ensure that the APIs + * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and + * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive + * manner with respect to each other. + * + * @li Re-entrant : no + * @li ISR Callable : yes + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTargetTimeInterruptEnable(IxTimeSyncAccTargetTimeCallback targetTimeCallback); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeInterruptDisable( + void) + * + * @brief Disables the interrupt for the condition explained in the function + * description of @ref ixTimeSyncAccTargetTimeInterruptEnable. + * + * This API will disable the Target Time interrupt. + * + * NOTE: The client application needs to ensure that the APIs + * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and + * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive + * manner with respect to each other. + * + * @li Re-entrant : no + * @li ISR Callable : yes + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTargetTimeInterruptDisable(void); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimePoll( + BOOL *ttmPollFlag, + IxTimeSyncAccTimeValue *targetTime) + * + * @brief Poll to verify the condition where the System Time greater or equal to + * the Target Time in the IEEE 1588 hardware assist block. If the condition is + * true an event flag is set in the hardware. + * + * @param ttmPollFlag [out] - TRUE if the target time reached/hit condition event set + * FALSE if the target time reached/hit condition event is + not set + * @param targetTime [out] - Capture current targetTime into client provided buffer + * + * Poll the target time reached/hit condition status. Return true and the current + * target time value, if the condition is true else return false. + * + * NOTE: The client application will need to clear the event flag that will be set + * as long as the condition that the System Time greater or equal to the Target Time is + * valid, in one of the following ways: + * 1) Invoke the API to change the target time + * 2) Change the system timer value + * + * @li Re-entrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + * @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTargetTimePoll(BOOL *ttmPollFlag, + IxTimeSyncAccTimeValue *targetTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeSet( + IxTimeSyncAccTimeValue targetTime) + * + * @brief Sets the Target Time in the IEEE 1588 hardware assist block + * + * @param targetTime [in] - Value to set Target Time + * + * This API will set the Target Time to a given value. + * + * NOTE: The client application needs to ensure that the APIs + * @ref ixTimeSyncAccTargetTimeInterruptEnable, @ref ixTimeSyncAccTargetTimeSet and + * @ref ixTimeSyncAccTargetTimeInterruptDisable are accessed in mutual exclusive + * manner with respect to each other. + * + * @li Reentrant : no + * @li ISR Callable : yes + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTargetTimeSet(IxTimeSyncAccTimeValue targetTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccTargetTimeGet( + IxTimeSyncAccTimeValue *targetTime) + * + * @brief Gets the Target Time in the IEEE 1588 hardware assist block + * + * @param targetTime [out] - Copy current time to client provided buffer + * + * This API will get the Target Time from IEEE 1588 block and return to the + * client application + * + * @li Re-entrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccTargetTimeGet(IxTimeSyncAccTimeValue *targetTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptEnable( + IxTimeSyncAccAuxMode auxMode, + IxTimeSyncAccAuxTimeCallback auxTimeCallback) + * + * @brief Enables the interrupt notification for the given mode of Auxiliary Time + * Stamp in the IEEE 1588 hardware assist block + * + * @param auxMode [in] - Auxiliary time stamp register (slave or master) to use + * @param auxTimeCallback [in] - Callback to be invoked when interrupt fires + * + * This API will enable the Auxiliary Master/Slave Time stamp Interrupt. + * + * <pre> + * NOTE: 1) An individual callback is to be registered for each Slave and Master + * Auxiliary Time Stamp registers. Thus to register for both Master and Slave time + * stamp interrupts either the same callback or two separate callbacks the API has + * to be invoked twice. + * 2) On the IXDP465 Development Platform, the Auxiliary Timestamp signal for + * slave mode is tied to GPIO 8 pin. This signal is software routed by default to + * PCI for backwards compatibility with the IXDP425 Development Platform. This + * routing must be disabled for the auxiliary slave time stamp register to work + * properly. The following commands may be used to accomplish this. However, refer + * to the IXDP465 Development Platform Users Guide or the BSP/LSP documentation for + * more specific information. + * + * For Linux (at the Redboot prompt i.e., before loading zImage): + * mfill -b 0x54100000 -1 -l 1 -p 8 + * mfill -b 0x54100001 -1 -l 1 -p 0x7f + * For vxWorks, at the prompt: + * intDisable(25) + * ixdp400FpgaIODetach(8) + * </pre> + * + * @li Re-entrant : no + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for callback or + invalid auxiliary snapshot mode + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccAuxTimeInterruptEnable(IxTimeSyncAccAuxMode auxMode, + IxTimeSyncAccAuxTimeCallback auxTimeCallback); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimeInterruptDisable( + IxTimeSyncAccAuxMode auxMode) + * + * @brief Disables the interrupt for the indicated mode of Auxiliary Time Stamp + * in the IEEE 1588 hardware assist block + * + * @param auxMode [in] - Auxiliary time stamp mode (slave or master) using which + * the interrupt will be disabled. + * + * This API will disable the Auxiliary Time Stamp Interrupt (Master or Slave) + * + * @li Re-entrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Invalid parameters passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccAuxTimeInterruptDisable(IxTimeSyncAccAuxMode auxMode); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccAuxTimePoll( + IxTimeSyncAccAuxMode auxMode, + BOOL *auxPollFlag, + IxTimeSyncAccTimeValue *auxTime) + * + * @brief Poll for the Auxiliary Time Stamp captured for the mode indicated + * (Master or Slave) + * + * @param auxMode [in] - Auxiliary Snapshot Register (Slave or Master) to be checked + * @param auxPollFlag [out] - TRUE if the time stamp captured in auxiliary + snapshot register + * FALSE if the time stamp not captured in + auxiliary snapshot register + * @param auxTime [out] - Copy the current Auxiliary Snapshot Register value into the + * client provided buffer + * + * Polls for the Time stamp in the appropriate Auxiliary Snapshot Registers based + * on the mode specified. Return true and the contents of the Auxiliary snapshot, + * if it is available else return false. + * + * Please refer to the note #2 of the API @ref ixTimeSyncAccAuxTimeInterruptEnable + * for more information for Auxiliary Slave mode. + * + * @li Re-entrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - Null parameter passed for auxPollFlag, + callback or invalid auxiliary snapshot mode + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + * @li IX_TIMESYNCACC_INTERRUPTMODEINUSE - Interrupt mode in use + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccAuxTimePoll(IxTimeSyncAccAuxMode auxMode, + BOOL *auxPollFlag, + IxTimeSyncAccTimeValue *auxTime); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccReset(void) + * + * @brief Resets the IEEE 1588 hardware assist block + * + * Sets the reset bit in the IEEE1588 silicon which fully resets the silicon block + * + * @li Reentrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccReset(void); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccStatsGet(IxTimeSyncAccStats + *timeSyncStats) + * + * @brief Returns the IxTimeSyncAcc Statistics in the client supplied buffer + * + * @param timeSyncStats [out] - TimeSync statistics counter values + * + * This API will return the statistics of the received or transmitted messages. + * + * NOTE: 1) These counters are updated only when the client polls for the time + * stamps or interrupt are enabled. This is because the IxTimeSyncAcc module + * does not either transmit or receive messages and does only run the code + * when explicit requests received by client application. + * + * 2) These statistics reflect the number of valid PTP messages exchanged + * in Master and Slave modes but includes all the messages (including valid + * non-PTP messages) while operating in the Any mode. + * + * @li Reentrant : no + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_INVALIDPARAM - NULL parameter passed + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccStatsGet(IxTimeSyncAccStats *timeSyncStats); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn void ixTimeSyncAccStatsReset(void) + * + * @brief Reset Time Sync statistics + * + * This API will reset the statistics counters of the TimeSync access layer. + * + * @li Reentrant : yes + * @li ISR Callable: no + * + * @return @li None + */ +PUBLIC void +ixTimeSyncAccStatsReset(void); + +/** + * @ingroup IxTimeSyncAcc + * + * @fn IxTimeSyncAccStatus ixTimeSyncAccShow(void) + * + * @brief Displays the Time Sync current status + * + * This API will display status on the current configuration of the IEEE + * 1588 hardware assist block, contents of the various time stamp registers, + * outstanding interrupts and/or events. + * + * Note that this is intended for debug only, and in contrast to the other + * functions, it does not clear the any of the status bits associated with + * active timestamps and so is passive in its nature. + * + * @li Reentrant : yes + * @li ISR Callable : no + * + * @return @li IX_TIMESYNCACC_SUCCESS - Operation is successful + * @li IX_TIMESYNCACC_FAILED - Internal error occurred + */ +PUBLIC IxTimeSyncAccStatus +ixTimeSyncAccShow(void); + +#endif /* __ixp46X */ +#endif /* IXTIMESYNCACC_H */ + +/** + * @} defgroup IxTimeSyncAcc + */ + diff --git a/drivers/net/npe/include/IxTimerCtrl.h b/drivers/net/npe/include/IxTimerCtrl.h new file mode 100644 index 0000000000..669dd3ef28 --- /dev/null +++ b/drivers/net/npe/include/IxTimerCtrl.h @@ -0,0 +1,263 @@ +/** + * @file IxTimerCtrl.h + * @brief + * This is the header file for the Timer Control component. + * + * The timer callback control component provides a mechanism by which different + * client components can start a timer and have a supplied callback function + * invoked when the timer expires. + * The callbacks are all dispatched from one thread inside this component. + * Any component that needs to be called periodically should use this facility + * rather than create its own task with a sleep loop. + * + * @par + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxTimerCtrl IXP400 Timer Control (IxTimerCtrl) API + * + * @brief The public API for the IXP400 Timer Control Component. + * + * @{ + */ + +#ifndef IxTimerCtrl_H +#define IxTimerCtrl_H + + +#include "IxTypes.h" +/* #include "Ossl.h" */ + +/* + * #defines and macros used in this file. + */ + +/** + * @ingroup IxTimerCtrl + * + * @def IX_TIMERCTRL_NO_FREE_TIMERS + * + * @brief Timer schedule return code. + * + * Indicates that the request to start a timer failed because + * all available timer resources are used. + */ +#define IX_TIMERCTRL_NO_FREE_TIMERS 2 + + +/** + * @ingroup IxTimerCtrl + * + * @def IX_TIMERCTRL_PARAM_ERROR + * + * @brief Timer schedule return code. + * + * Indicates that the request to start a timer failed because + * the client has supplied invalid parameters. + */ +#define IX_TIMERCTRL_PARAM_ERROR 3 + + +/* + * Typedefs whose scope is limited to this file. + */ + +/** + * @ingroup IxTimerCtrl + * + * @brief A typedef for a pointer to a timer callback function. + * @para void * - This parameter is supplied by the client when the + * timer is started and passed back to the client in the callback. + * @note in general timer callback functions should not block or + * take longer than 100ms. This constraint is required to ensure that + * higher priority callbacks are not held up. + * All callbacks are called from the same thread. + * This thread is a shared resource. + * The parameter passed is provided when the timer is scheduled. + */ +typedef void (*IxTimerCtrlTimerCallback)(void *userParam); + + +/** + * @ingroup IxTimerCtrl + * + * @brief List used to identify the users of timers. + * @note The order in this list indicates priority. Components appearing + * higher in the list will be given priority over components lower in the + * list. When adding components, please insert at an appropriate position + * for priority ( i.e values should be less than IxTimerCtrlMaxPurpose ) . + */ +typedef enum +{ + IxTimerCtrlAdslPurpose, + /* Insert new purposes above this line only + */ + IxTimerCtrlMaxPurpose +} +IxTimerCtrlPurpose; + + +/* + * Function definition + */ + +/** + * @ingroup IxTimerCtrl + * + * @fn ixTimerCtrlSchedule(IxTimerCtrlTimerCallback func, + void *userParam, + IxTimerCtrlPurpose purpose, + UINT32 relativeTime, + unsigned *timerId ) + * + * @brief Schedules a callback function to be called after a period of "time". + * The callback function should not block or run for more than 100ms. + * This function + * + * @param func @ref IxTimerCtrlTimerCallback [in] - the callback function to be called. + * @param userParam void [in] - a parameter to send to the callback function, can be NULL. + * @param purpose @ref IxTimerCtrlPurpose [in] - the purpose of the callback, internally this component will + * decide the priority of callbacks with different purpose. + * @param relativeTime UINT32 [in] - time relative to now in milliseconds after which the callback + * will be called. The time must be greater than the duration of one OS tick. + * @param *timerId unsigned [out] - An id for the callback scheduled. + * This id can be used to cancel the callback. + * @return + * @li IX_SUCCESS - The timer was started successfully. + * @li IX_TIMERCTRL_NO_FREE_TIMERS - The timer was not started because the maximum number + * of running timers has been exceeded. + * @li IX_TIMERCTRL_PARAM_ERROR - The timer was not started because the client has supplied + * a NULL callback func, or the requested timeout is less than one OS tick. + * @note This function is re-entrant. The function accesses a list of running timers + * and may suspend the calling thread if this list is being accesed by another thread. + */ +PUBLIC IX_STATUS +ixTimerCtrlSchedule(IxTimerCtrlTimerCallback func, + void *userParam, + IxTimerCtrlPurpose purpose, + UINT32 relativeTime, + unsigned *timerId ); + + +/** + * @ingroup IxTimerCtrl + * + * @fn ixTimerCtrlScheduleRepeating(IxTimerCtrlTimerCallback func, + void *param, + IxTimerCtrlPurpose purpose, + UINT32 interval, + unsigned *timerId ) + * + * @brief Schedules a callback function to be called after a period of "time". + * The callback function should not block or run for more than 100ms. + * + * @param func @ref IxTimerCtrlTimerCallback [in] - the callback function to be called. + * @param userParam void [in] - a parameter to send to the callback function, can be NULL. + * @param purpose @ref IxTimerCtrlPurpose [in] - the purpose of the callback, internally this component will + * decide the priority of callbacks with different purpose. + * @param interval UINT32 [in] - the interval in milliseconds between calls to func. + * @param timerId unsigned [out] - An id for the callback scheduled. + * This id can be used to cancel the callback. + * @return + * @li IX_SUCCESS - The timer was started successfully. + * @li IX_TIMERCTRL_NO_FREE_TIMERS - The timer was not started because the maximum number + * of running timers has been exceeded. + * @li IX_TIMERCTRL_PARAM_ERROR - The timer was not started because the client has supplied + * a NULL callback func, or the requested timeout is less than one OS tick. + * @note This function is re-entrant. The function accesses a list of running timers + * and may suspend the calling thread if this list is being accesed by another thread. + */ +PUBLIC IX_STATUS +ixTimerCtrlScheduleRepeating(IxTimerCtrlTimerCallback func, + void *param, + IxTimerCtrlPurpose purpose, + UINT32 interval, + unsigned *timerId ); + +/** + * @ingroup IxTimerCtrl + * + * @fn ixTimerCtrlCancel (unsigned id) + * + * @brief Cancels a scheduled callback. + * + * @param id unsigned [in] - the id of the callback to be cancelled. + * @return + * @li IX_SUCCESS - The timer was successfully stopped. + * @li IX_FAIL - The id parameter did not corrrespond to any running timer.. + * @note This function is re-entrant. The function accesses a list of running timers + * and may suspend the calling thread if this list is being accesed by another thread. + */ +PUBLIC IX_STATUS +ixTimerCtrlCancel (unsigned id); + +/** + * @ingroup IxTimerCtrl + * + * @fn ixTimerCtrlInit(void) + * + * @brief Initialise the Timer Control Component. + * @return + * @li IX_SUCCESS - The timer control component initialized successfully. + * @li IX_FAIL - The timer control component initialization failed, + * or the component was already initialized. + * @note This must be done before any other API function is called. + * This function should be called once only and is not re-entrant. + */ +PUBLIC IX_STATUS +ixTimerCtrlInit(void); + + +/** + * @ingroup IxTimerCtrl + * + * @fn ixTimerCtrlShow( void ) + * + * @brief Display the status of the Timer Control Component. + * @return void + * @note Displays a list of running timers. + * This function is not re-entrant. This function does not suspend the calling thread. + */ +PUBLIC void +ixTimerCtrlShow( void ); + +#endif /* IXTIMERCTRL_H */ + diff --git a/drivers/net/npe/include/IxTypes.h b/drivers/net/npe/include/IxTypes.h new file mode 100644 index 0000000000..c4c5a2d267 --- /dev/null +++ b/drivers/net/npe/include/IxTypes.h @@ -0,0 +1,86 @@ +/** + * @file IxTypes.h (Replaced by OSAL) + * + * @date 28-NOV-2001 + + * @brief This file contains basic types used by the IXP400 software + * + * Design Notes: + * This file shall only include fundamental types and definitions to be + * shared by all the IXP400 components. + * Please DO NOT add component-specific types here. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxTypes IXP400 Types (IxTypes) + * + * @brief Basic data types used by the IXP400 project + * + * @{ + */ + +#ifndef IxTypes_H + +#ifndef __doxygen_HIDE + +#define IxTypes_H + +#endif /* __doxygen_HIDE */ + + +/* WR51880: Undefined data types workaround for backward compatibility */ +#ifdef __linux +#ifndef __INCvxTypesOldh +typedef int (*FUNCPTR)(void); +typedef int STATUS; +#define OK (0) +#define ERROR (-1) +#endif +#endif + +#include "IxOsalBackward.h" + +#endif /* IxTypes_H */ + +/** + * @} addtogroup IxTypes + */ diff --git a/drivers/net/npe/include/IxUART.h b/drivers/net/npe/include/IxUART.h new file mode 100644 index 0000000000..03a44441c5 --- /dev/null +++ b/drivers/net/npe/include/IxUART.h @@ -0,0 +1,458 @@ +/** + * @file IxUART.h + * + * @date 12-OCT-01 + * + * @brief Public header for the Intel IXP400 internal UART, generic driver. + * + * Design Notes: + * This driver allows you to perform the following functions: + * Device Initialization, + * send/receive characters. + * + * Perform Uart IOCTL for the following: + * Set/Get the current baud rate, + * set parity, + * set the number of Stop bits, + * set the character Length (5,6,7,8), + * enable/disable Hardware flow control. + * + * Only Polled mode is supported for now. + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- +*/ + +/** + * @defgroup IxUARTAccAPI IXP400 UART Access (IxUARTAcc) API + * + * @brief IXP400 UARTAcc Driver Public API + * + * @{ + */ + + +/* Defaults */ + +/** + * @defgroup DefaultDefines Defines for Default Values + * + * @brief Default values which can be used for UART configuration + * + * @sa ixUARTDev + */ + +/** + * @def IX_UART_DEF_OPTS + * + * @brief The default hardware options to set the UART to - + * no flow control, 8 bit word, 1 stop bit, no parity + * + * @ingroup DefaultDefines + */ +#define IX_UART_DEF_OPTS (CLOCAL | CS8) + +/** + * @def IX_UART_DEF_XMIT + * + * @brief The default UART FIFO size - must be no bigger than 64 + * + * @ingroup DefaultDefines + */ +#define IX_UART_DEF_XMIT 64 + +/** + * @def IX_UART_DEF_BAUD + * + * @brief The default UART baud rate - 9600 + * + * @ingroup DefaultDefines + */ +#define IX_UART_DEF_BAUD 9600 + +/** + * @def IX_UART_MIN_BAUD + * + * @brief The minimum UART baud rate - 9600 + * + * @ingroup DefaultDefines + */ +#define IX_UART_MIN_BAUD 9600 + +/** + * @def IX_UART_MAX_BAUD + * + * @brief The maximum UART baud rate - 926100 + * + * @ingroup DefaultDefines + */ +#define IX_UART_MAX_BAUD 926100 + +/** + * @def IX_UART_XTAL + * + * @brief The UART clock speed + * + * @ingroup DefaultDefines + */ +#define IX_UART_XTAL 14745600 + + + +/* IOCTL commands (Request codes) */ + +/** + * @defgroup IoctlCommandDefines Defines for IOCTL Commands + * + * @brief IOCTL Commands (Request codes) which can be used + * with @ref ixUARTIoctl + */ + + +/** + * @ingroup IoctlCommandDefines + * + * @def IX_BAUD_SET + * + * @brief Set the baud rate + */ +#define IX_BAUD_SET 0 + +/** + * @ingroup IoctlCommandDefines + * + * @def IX_BAUD_GET + * + * @brief Get the baud rate + */ +#define IX_BAUD_GET 1 + +/** + * @ingroup IoctlCommandDefines + * @def IX_MODE_SET + * @brief Set the UART mode of operation + */ +#define IX_MODE_SET 2 + +/** + * @ingroup IoctlCommandDefines + * + * @def IX_MODE_GET + * + * @brief Get the current UART mode of operation + */ +#define IX_MODE_GET 3 + +/** + * @ingroup IoctlCommandDefines + * + * @def IX_OPTS_SET + * + * @brief Set the UART device options + */ +#define IX_OPTS_SET 4 + +/** + * @ingroup IoctlCommandDefines + * + * @def IX_OPTS_GET + * + * @brief Get the UART device options + */ +#define IX_OPTS_GET 5 + +/** + * @ingroup IoctlCommandDefines + * + * @def IX_STATS_GET + * + * @brief Get the UART statistics + */ +#define IX_STATS_GET 6 + + +/* POSIX style ioctl arguments */ + +/** + * @defgroup IoctlArgDefines Defines for IOCTL Arguments + * + * @brief POSIX style IOCTL arguments which can be used + * with @ref ixUARTIoctl + * + * @sa ixUARTMode + */ + + +/** + * @ingroup IoctlArgDefines + * + * @def CLOCAL + * + * @brief Software flow control + */ +#ifdef CLOCAL +#undef CLOCAL +#endif +#define CLOCAL 0x1 + +/** + * @ingroup IoctlArgDefines + * + * @def CREAD + * + * @brief Enable interrupt receiver + */ +#ifdef CREAD +#undef CREAD +#endif +#define CREAD 0x2 + +/** + * @ingroup IoctlArgDefines + * + * @def CSIZE + * + * @brief Characters size + */ +#ifdef CSIZE +#undef CSIZE +#endif +#define CSIZE 0xc + +/** + * @ingroup IoctlArgDefines + * + * @def CS5 + * + * @brief 5 bits + */ +#ifdef CS5 +#undef CS5 +#endif +#define CS5 0x0 + +/** + * @ingroup IoctlArgDefines + * + * @def CS6 + * + * @brief 6 bits + */ +#ifdef CS6 +#undef CS6 +#endif +#define CS6 0x4 + +/** + * @ingroup IoctlArgDefines + * + * @def CS7 + * + * @brief 7 bits + */ +#ifdef CS7 +#undef CS7 +#endif +#define CS7 0x8 + +/** + * @ingroup IoctlArgDefines + * + * @def CS8 + * + * @brief 8 bits + */ +#ifdef CS8 +#undef CS8 +#endif +#define CS8 0xc + +/** + * @ingroup IoctlArgDefines + * + * @def STOPB + * + * @brief Send two stop bits (else one) + */ +#define STOPB 0x20 + +/** + * @ingroup IoctlArgDefines + * + * @def PARENB + * + * @brief Parity detection enabled (else disabled) + */ +#ifdef PARENB +#undef PARENB +#endif +#define PARENB 0x40 + +/** + * @ingroup IoctlArgDefines + * + * @def PARODD + * + * @brief Odd parity (else even) + */ +#ifdef PARODD +#undef PARODD +#endif +#define PARODD 0x80 + +/** + * @enum ixUARTMode + * @brief The mode to set to UART to. + */ +typedef enum +{ + INTERRUPT=0, /**< Interrupt mode */ + POLLED, /**< Polled mode */ + LOOPBACK /**< Loopback mode */ +} ixUARTMode; + +/** + * @struct ixUARTStats + * @brief Statistics for the UART. + */ +typedef struct +{ + UINT32 rxCount; + UINT32 txCount; + UINT32 overrunErr; + UINT32 parityErr; + UINT32 framingErr; + UINT32 breakErr; +} ixUARTStats; + +/** + * @struct ixUARTDev + * @brief Device descriptor for the UART. + */ +typedef struct +{ + UINT8 *addr; /**< device base address */ + ixUARTMode mode; /**< interrupt, polled or loopback */ + int baudRate; /**< baud rate */ + int freq; /**< UART clock frequency */ + int options; /**< hardware options */ + int fifoSize; /**< FIFO xmit size */ + + ixUARTStats stats; /**< device statistics */ +} ixUARTDev; + +/** + * @ingroup IxUARTAccAPI + * + * @fn IX_STATUS ixUARTInit(ixUARTDev* pUART) + * + * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device. + * + * @brief Initialise the UART. This puts the chip in a quiescent state. + * + * @pre The base address for the UART must contain a valid value. + * Also the baud rate and hardware options must contain sensible values + * otherwise the defaults will be used as defined in ixUART.h + * + * @post UART is initialized and ready to send and receive data. + * + * @note This function should only be called once per device. + * + * @retval IX_SUCCESS - UART device successfully initialised. + * @retval IX_FAIL - Critical error, device not initialised. + ***************************************************************************/ +PUBLIC IX_STATUS ixUARTInit(ixUARTDev* pUART); + +/** + * @ingroup IxUARTAccAPI + * + * @fn IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar) + * + * @param pUART @ref ixUARTDev [out] - pointer to UART structure describing our device. + * @param outChar int [out] - character to transmit. + * + * @brief Transmit a character in polled mode. + * + * @pre UART device must be initialised. + * + * @retval IX_SUCCESS - character was successfully transmitted. + * @retval IX_FAIL - output buffer is full (try again). + ***************************************************************************/ +PUBLIC IX_STATUS ixUARTPollOutput(ixUARTDev* pUART, int outChar); + +/** + * @ingroup IxUARTAccAPI + * + * @fn IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar) + * + * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device. + * @param *inChar char [in] - character read from the device. + * + * @brief Receive a character in polled mode. + * + * @pre UART device must be initialised. + * + * @retval IX_SUCCESS - character was successfully read. + * @retval IX_FAIL - input buffer empty (try again). + ***************************************************************************/ +PUBLIC IX_STATUS ixUARTPollInput(ixUARTDev* pUART, char *inChar); + +/** + * @ingroup IxUARTAccAPI + * + * @fn IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg) + * + * @param pUART @ref ixUARTDev [in] - pointer to UART structure describing our device. + * @param cmd int [in] - an ioctl request code. + * @param arg void* [in] - optional argument used to set the device mode, + * baud rate, and hardware options. + * + * @brief Perform I/O control routines on the device. + * + * @retval IX_SUCCESS - requested feature was set/read successfully. + * @retval IX_FAIL - error setting/reading the requested feature. + * + * @sa IoctlCommandDefines + * @sa IoctlArgDefines + ***************************************************************************/ +PUBLIC IX_STATUS ixUARTIoctl(ixUARTDev* pUART, int cmd, void* arg); + +/** + * @} defgroup IxUARTAcc + */ diff --git a/drivers/net/npe/include/IxVersionId.h b/drivers/net/npe/include/IxVersionId.h new file mode 100644 index 0000000000..27796ede84 --- /dev/null +++ b/drivers/net/npe/include/IxVersionId.h @@ -0,0 +1,155 @@ +/** + * @file IxVersionId.h + * + * @date 22-Aug-2002 + * + * @brief This file contains the IXP400 Software version identifier + * + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + */ + +/** + * @defgroup IxVersionId IXP400 Version ID (IxVersionId) + * + * @brief Version Identifiers + * + * @{ + */ + +#ifndef IXVERSIONID_H +#define IXVERSIONID_H + +/** + * @brief Version Identifier String + * + * This string will be updated with each customer release of the IXP400 + * Software. + */ +#define IX_VERSION_ID "2_0" + +/** + * This string will be updated with each customer release of the IXP400 + * ADSL driver package. + */ +#define IX_VERSION_ADSL_ID "1_12" + + +/** + * This string will be updated with each customer release of the IXP400 + * USB Client driver package. + */ +#define IX_VERSION_USBRNDIS_ID "1_9" + +/** + * This string will be updated with each customer release of the IXP400 + * I2C Linux driver package. + */ +#define IX_VERSION_I2C_LINUX_ID "1_0" + +/** + * @brief Linux Ethernet Driver Patch Version Identifier String + * + * This string will be updated with each release of Linux Ethernet Patch + */ +#define LINUX_ETHERNET_DRIVER_PATCH_ID "1_4" + +/** + * @brief Linux Integration Patch Version Identifier String + * + * This String will be updated with each release of Linux Integration Patch + */ +#define LINUX_INTEGRATION_PATCH_ID "1_3" + +/** + * @brief Linux Ethernet Readme version Identifier String + * + * This string will be updated with each release of Linux Ethernet Readme + */ +#define LINUX_ETHERNET_README_ID "1_3" + +/** + * @brief Linux Integration Readme version Identifier String + * + * This string will be updated with each release of Linux Integration Readme + */ + +#define LINUX_INTEGRATION_README_ID "1_3" + +/** + * @brief Linux I2C driver Readme version Identifier String + * + * This string will be updated with each release of Linux I2C Driver Readme + */ +#define LINUX_I2C_DRIVER_README_ID "1_0" + +/** + * @brief ixp425_eth_update_nf_bridge.patch version Identifier String + * + * This string will be updated with each release of ixp425_eth_update_nf_bridge. +patch + * + */ + +#define IXP425_ETH_UPDATE_NF_BRIDGE_ID "1_3" + +/** + * @brief Internal Release Identifier String + * + * This string will be updated with each internal release (SQA drop) + * of the IXP400 Software. + */ +#define IX_VERSION_INTERNAL_ID "SQA3_5" + +/** + * @brief Compatible Tornado Version Identifier + */ +#define IX_VERSION_COMPATIBLE_TORNADO "Tornado2_2_1-PNE2_0" + +/** + * @brief Compatible Linux Version Identifier + */ +#define IX_VERSION_COMPATIBLE_LINUX "MVL3_1" + + +#endif /* IXVERSIONID_H */ + +/** + * @} addtogroup IxVersionId + */ diff --git a/drivers/net/npe/include/ix_error.h b/drivers/net/npe/include/ix_error.h new file mode 100644 index 0000000000..d32ace20b5 --- /dev/null +++ b/drivers/net/npe/include/ix_error.h @@ -0,0 +1,66 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = FILENAME + * ix_error.h (Replaced by OSAL) + * + * = DESCRIPTION + * This file will describe the basic error type and support functions that + * will be used by the IXA SDK Framework API. + * + * = AUTHOR + * Intel Corporation + * + * = CHANGE HISTORY + * 4/22/2002 4:19:03 PM - creation time + * ============================================================================ + */ + +#if !defined(__IX_ERROR_H__) +#define __IX_ERROR_H__ + +#include "IxOsalBackward.h" + +#endif /* end !defined(__IX_ERROR_H__) */ + diff --git a/drivers/net/npe/include/ix_macros.h b/drivers/net/npe/include/ix_macros.h new file mode 100644 index 0000000000..53f5942f97 --- /dev/null +++ b/drivers/net/npe/include/ix_macros.h @@ -0,0 +1,266 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = FILENAME + * ix_macros.h + * + * = DESCRIPTION + * This file will define the basic preprocessor macros that are going to be used + * the IXA SDK Framework API. + * + * = AUTHOR + * Intel Corporation + * + * = CHANGE HISTORY + * 4/22/2002 4:41:05 PM - creation time + * ============================================================================ + */ + +#if !defined(__IX_MACROS_H__) +#define __IX_MACROS_H__ + + +#if defined(__cplusplus) +extern "C" +{ +#endif /* end defined(__cplusplus) */ + + +/** + * MACRO NAME: IX_BIT_FIELD_MASK16 + * + * DESCRIPTION: Builds the mask required to extract the bit field from a 16 bit unsigned integer value. + * + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns a 16 bit mask that will extract the bit field from a 16 bit unsigned integer value. + */ +#define IX_BIT_FIELD_MASK16( \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + ((ix_bit_mask16)((((ix_uint16)1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - \ + (ix_uint16)1) << arg_FieldLSBBit)) + + + +/** + * MACRO NAME: IX_GET_BIT_FIELD16 + * + * DESCRIPTION: Extracts a bit field from 16 bit unsigned integer. The returned value is normalized in + * in the sense that will be right aligned. + * + * @Param: - IN arg_PackedData16 a 16 bit unsigned integer that contains the bit field of interest. + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns the value of the bit field. The value can be from 0 to (1 << (arg_FieldMSBBit + 1 - + * arg_FieldLSBBit)) - 1. + */ +#define IX_GET_BIT_FIELD16( \ + arg_PackedData16, \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + (((ix_uint16)(arg_PackedData16) & IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit)) >> \ + arg_FieldLSBBit) + + +/** + * MACRO NAME: IX_MAKE_BIT_FIELD16 + * + * DESCRIPTION: This macro will create a temporary 16 bit value with the bit field + * desired set to the desired value. + * + * @Param: - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to + * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns a temporary ix_uint16 value that has the bit field set to the appropriate value. + */ +#define IX_MAKE_BIT_FIELD16( \ + arg_BitFieldValue, \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + (((ix_uint16)(arg_BitFieldValue) << arg_FieldLSBBit) & \ + IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit)) + +/** + * MACRO NAME: IX_SET_BIT_FIELD16 + * + * DESCRIPTION: Sets a new value for a bit field from a 16 bit unsigned integer. + * + * @Param: - IN arg_PackedData16 a 16 bit unsigned integer that contains the bit field of interest. + * @Param: - IN arg_BitFieldValue is the new vale of the bit field. The value can be from 0 to + * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns the updated value of arg_PackedData16. + */ +#define IX_SET_BIT_FIELD16( \ + arg_PackedData16, \ + arg_BitFieldValue, \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + (arg_PackedData16 = (((ix_uint16)(arg_PackedData16) & \ + ~(IX_BIT_FIELD_MASK16(arg_FieldLSBBit, arg_FieldMSBBit))) | \ + IX_MAKE_BIT_FIELD16(arg_BitFieldValue, arg_FieldLSBBit, arg_FieldMSBBit))) + + +/** + * MACRO NAME: IX_BIT_FIELD_MASK32 + * + * DESCRIPTION: Builds the mask required to extract the bit field from a 32 bit unsigned integer value. + * + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns a 32 bit mask that will extract the bit field from a 32 bit unsigned integer value. + */ +#define IX_BIT_FIELD_MASK32( \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + ((ix_bit_mask32)((((ix_uint32)1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - \ + (ix_uint32)1) << arg_FieldLSBBit)) + + + +/** + * MACRO NAME: IX_GET_BIT_FIELD32 + * + * DESCRIPTION: Extracts a bit field from 32 bit unsigned integer. The returned value is normalized in + * in the sense that will be right aligned. + * + * @Param: - IN arg_PackedData32 a 32 bit unsigned integer that contains the bit field of interest. + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns the value of the bit field. The value can be from 0 to (1 << (arg_FieldMSBBit + 1 - + * arg_FieldLSBBit)) - 1. + */ +#define IX_GET_BIT_FIELD32( \ + arg_PackedData32, \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + (((ix_uint32)(arg_PackedData32) & IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit)) >> \ + arg_FieldLSBBit) + + + + +/** + * MACRO NAME: IX_MAKE_BIT_FIELD32 + * + * DESCRIPTION: This macro will create a temporary 32 bit value with the bit field + * desired set to the desired value. + * + * @Param: - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to + * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns a temporary ix_uint32 value that has the bit field set to the appropriate value. + */ +#define IX_MAKE_BIT_FIELD32( \ + arg_BitFieldValue, \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + (((ix_uint32)(arg_BitFieldValue) << arg_FieldLSBBit) & \ + IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit)) + + +/** + * MACRO NAME: IX_SET_BIT_FIELD32 + * + * DESCRIPTION: Sets a new value for a bit field from a 32 bit unsigned integer. + * + * @Param: - IN arg_PackedData32 a 32 bit unsigned integer that contains the bit field of interest. + * @Param: - IN arg_BitFieldValue is the new value of the bit field. The value can be from 0 to + * (1 << (arg_FieldMSBBit + 1 - arg_FieldLSBBit)) - 1. + * @Param: - IN arg_FieldLSBBit an unsigned integer value representing the position of the least significant + * bit of the bit field. + * @Param: - IN arg_FieldMSBBit an unsigned integer value representing the position of the most significant + * bit of the bit field. + * + * @Return: Returns the updated value of arg_PackedData32. + */ +#define IX_SET_BIT_FIELD32( \ + arg_PackedData32, \ + arg_BitFieldValue, \ + arg_FieldLSBBit, \ + arg_FieldMSBBit \ + ) \ + (arg_PackedData32 = (((ix_uint32)(arg_PackedData32) & \ + ~(IX_BIT_FIELD_MASK32(arg_FieldLSBBit, arg_FieldMSBBit))) | \ + IX_MAKE_BIT_FIELD32(arg_BitFieldValue, arg_FieldLSBBit, arg_FieldMSBBit))) + + + +#if defined(__cplusplus) +} +#endif /* end defined(__cplusplus) */ + +#endif /* end !defined(__IX_MACROS_H__) */ diff --git a/drivers/net/npe/include/ix_os_type.h b/drivers/net/npe/include/ix_os_type.h new file mode 100644 index 0000000000..8575096722 --- /dev/null +++ b/drivers/net/npe/include/ix_os_type.h @@ -0,0 +1,65 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = FILENAME + * ix_os_type.h (Replaced by OSAL) + * + * = DESCRIPTION + * This file provides protable symbol definitions for the current OS type. + * + * = AUTHOR + * Intel Corporation + * + * = CHANGE HISTORY + * 4/22/2002 4:43:30 PM - creation time + * ============================================================================ + */ + +#if !defined(__IX_OS_TYPE_H__) +#define __IX_OS_TYPE_H__ + +#include "IxOsalBackward.h" + +#endif /* end !defined(__IX_OS_TYPE_H__) */ + diff --git a/drivers/net/npe/include/ix_ossl.h b/drivers/net/npe/include/ix_ossl.h new file mode 100644 index 0000000000..b59f7d0873 --- /dev/null +++ b/drivers/net/npe/include/ix_ossl.h @@ -0,0 +1,160 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = LIBRARY + * OSSL - Operating System Services Library + * + * = MODULE + * OSSL Abstraction layer header file + * + * = FILENAME + * ix_ossl.h (Replaced by OSAL) + * + * = DESCRIPTION + * This file contains the prototypes of OS-independent wrapper + * functions which allow the programmer not to be tied to a specific + * operating system. The OSSL functions can be divided into three classes: + * + * 1) synchronization-related wrapper functions around thread system calls + * 2) thread-related wrapper functions around thread calls + * 3) transactor/workbench osapi calls -- defined in osApi.h + * + * Both 1 and 2 classes of functions provide Thread Management, Thread + * Synchronization, Mutual Exclusion and Timer primitives. Namely, + * creation and deletion functions as well as the standard "wait" and + * "exit". Additionally, a couple of utility functions which enable to + * pause the execution of a thread are also provided. + * + * The 3rd class provides a slew of other OSAPI functions to handle + * Transactor/WorkBench OS calls. + * + * + * OSSL Thread APIs: + * The OSSL thread functions that allow for thread creation, + * get thread id, thread deletion and set thread priroity. + * + * ix_ossl_thread_create + * ix_ossl_thread_get_id + * ix_ossl_thread_exit + * ix_ossl_thread_kill + * ix_ossl_thread_set_priority + * ix_ossl_thread__delay + * + * OSSL Semaphore APIs: + * The OSSL semaphore functions that allow for initialization, + * posting, waiting and deletion of semaphores. + * + * ix_ossl_sem_init + * ix_ossl_sem_fini + * ix_ossl_sem_take + * ix_ossl_sem_give + * ix_ossl_sem_flush + * + * OSSL Mutex APIs: + * The OSSL wrapper functions that allow for initialization, + * posting, waiting and deletion of mutexes. + * + * ix_ossl_mutex_init + * ix_ossl_mutex_fini + * ix_ossl_mutex_lock + * ix_ossl_mutex_unlock + * + * OSSL Timer APIs: + * The timer APIs provide sleep and get time functions. + * + * ix_ossl_sleep + * ix_ossl_sleep_tick + * ix_ossl_time_get + * + * OSAPIs for Transactor/WorkBench: + * These OSAPI functions are used for transator OS calls. + * They are defined in osApi.h. + * + * Sem_Init + * Sem_Destroy + * Sem_Wait + * Sem_Wait + * Thread_Create + * Thread_Cancel + * Thread_SetPriority + * delayMs + * delayTick + * + * + * + ********************************************************************** + * + * + * = AUTHOR + * Intel Corporation + * + * = ACKNOWLEDGEMENTS + * + * + * = CREATION TIME + * 1/8/2002 1:53:42 PM + * + * = CHANGE HISTORY + * 02/22/2002 : Renamed osapi.h os_api.h + * Moved OS header file includes from OSSL.h to os_api.h + * Moved OS specific datatypes to os_api.h + * Modified data types, macros and functions as per + * 'C' coding guidelines. + * + * + * ============================================================================ + */ + +#ifndef _IX_OSSL_H +#ifndef __doxygen_hide +#define _IX_OSSL_H +#endif /* __doxygen_hide */ + +#include "IxOsalBackward.h" + +#endif /* _IX_OSSL_H */ + +/** + * @} defgroup IxOSSL + */ diff --git a/drivers/net/npe/include/ix_symbols.h b/drivers/net/npe/include/ix_symbols.h new file mode 100644 index 0000000000..f7bb029d66 --- /dev/null +++ b/drivers/net/npe/include/ix_symbols.h @@ -0,0 +1,106 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = FILENAME + * ix_symbols.h + * + * = DESCRIPTION + * This file declares all the global preprocessor symbols required by + * the IXA SDK Framework API. + * + * = AUTHOR + * Intel Corporation + * + * = CHANGE HISTORY + * 4/23/2002 10:41:13 AM - creation time + * ============================================================================ + */ + +#if !defined(__IX_SYMBOLS_H__) +#define __IX_SYMBOLS_H__ + + +#if defined(__cplusplus) +extern "C" +{ +#endif /* end defined(__cplusplus) */ + +/** + * The IX_EXPORT_FUNCTION symbol will be used for compilation on different platforms. + * We are planning to provide a simulation version of the library that should work + * with the Transactor rather than the hardware. This implementation will be done on + * WIN32 in the form of a DLL that will need to export functions and symbols. + */ +#if (_IX_OS_TYPE_ == _IX_OS_WIN32_) +# if defined(_IX_LIB_INTERFACE_IMPLEMENTATION_) +# define IX_EXPORT_FUNCTION __declspec( dllexport ) +# elif defined(_IX_LIB_INTERFACE_IMPORT_DLL_) +# define IX_EXPORT_FUNCTION __declspec( dllimport ) +# else +# define IX_EXPORT_FUNCTION extern +# endif +#elif (_IX_OS_TYPE_ == _IX_OS_WINCE_) +# define IX_EXPORT_FUNCTION __declspec(dllexport) +#else +# define IX_EXPORT_FUNCTION extern +#endif + + +/** + * This symbols should be defined when we want to build for a multithreaded environment + */ +#define _IX_MULTI_THREADED_ 1 + + +/** + * This symbol should be defined in the case we to buils for a multithreaded environment + * but we want that our modules to work as if they are used in a single threaded environment. + */ +/* #define _IX_RM_EXPLICIT_SINGLE_THREADED_ 1 */ + +#if defined(__cplusplus) +} +#endif /* end defined(__cplusplus) */ + +#endif /* end !defined(__IX_SYMBOLS_H__) */ diff --git a/drivers/net/npe/include/ix_types.h b/drivers/net/npe/include/ix_types.h new file mode 100644 index 0000000000..fc7b1e993a --- /dev/null +++ b/drivers/net/npe/include/ix_types.h @@ -0,0 +1,208 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = FILENAME + * ix_types.h + * + * = DESCRIPTION + * This file will define generic types that will guarantee the protability + * between different architectures and compilers. It should be used the entire + * IXA SDK Framework API. + * + * = AUTHOR + * Intel Corporation + * + * = CHANGE HISTORY + * 4/22/2002 4:44:17 PM - creation time + * ============================================================================ + */ + +#if !defined(__IX_TYPES_H__) +#define __IX_TYPES_H__ + + +#if defined(__cplusplus) +extern "C" +{ +#endif /* end defined(__cplusplus) */ + + +/** + * Define generic integral data types that will guarantee the size. + */ + +/** + * TYPENAME: ix_int8 + * + * DESCRIPTION: This type defines an 8 bit signed integer value. + * + */ +typedef signed char ix_int8; + + +/** + * TYPENAME: ix_uint8 + * + * DESCRIPTION: This type defines an 8 bit unsigned integer value. + * + */ +typedef unsigned char ix_uint8; + + +/** + * TYPENAME: ix_int16 + * + * DESCRIPTION: This type defines an 16 bit signed integer value. + * + */ +typedef signed short int ix_int16; + + +/** + * TYPENAME: ix_uint16 + * + * DESCRIPTION: This type defines an 16 bit unsigned integer value. + * + */ +typedef unsigned short int ix_uint16; + + +/** + * TYPENAME: ix_int32 + * + * DESCRIPTION: This type defines an 32 bit signed integer value. + * + */ +typedef signed int ix_int32; + + +/** + * TYPENAME: ix_uint32 + * + * DESCRIPTION: This type defines an 32 bit unsigned integer value. + * + */ +#ifndef __wince +typedef unsigned int ix_uint32; +#else +typedef unsigned long ix_uint32; +#endif + +/** + * TYPENAME: ix_int64 + * + * DESCRIPTION: This type defines an 64 bit signed integer value. + * + */ +#ifndef __wince +__extension__ typedef signed long long int ix_int64; +#endif + +/** + * TYPENAME: ix_uint64 + * + * DESCRIPTION: This type defines an 64 bit unsigned integer value. + * + */ +#ifndef __wince +__extension__ typedef unsigned long long int ix_uint64; +#endif + + +/** + * TYPENAME: ix_bit_mask8 + * + * DESCRIPTION: This is a generic type for a 8 bit mask. + */ +typedef ix_uint8 ix_bit_mask8; + + +/** + * TYPENAME: ix_bit_mask16 + * + * DESCRIPTION: This is a generic type for a 16 bit mask. + */ +typedef ix_uint16 ix_bit_mask16; + + +/** + * TYPENAME: ix_bit_mask32 + * + * DESCRIPTION: This is a generic type for a 32 bit mask. + */ +typedef ix_uint32 ix_bit_mask32; + + +/** + * TYPENAME: ix_bit_mask64 + * + * DESCRIPTION: This is a generic type for a 64 bit mask. + */ +#ifndef __wince +typedef ix_uint64 ix_bit_mask64; +#endif + + +/** + * TYPENAME: ix_handle + * + * DESCRIPTION: This type defines a generic handle. + * + */ +typedef ix_uint32 ix_handle; + + + +/** + * DESCRIPTION: This symbol defines a NULL handle + * + */ +#define IX_NULL_HANDLE ((ix_handle)0) + + +#if defined(__cplusplus) +} +#endif /* end defined(__cplusplus) */ + +#endif /* end !defined(__IX_TYPES_H__) */ diff --git a/drivers/net/npe/include/npe.h b/drivers/net/npe/include/npe.h new file mode 100644 index 0000000000..b5eef8633f --- /dev/null +++ b/drivers/net/npe/include/npe.h @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2005 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef NPE_H +#define NPE_H + +/* + * defines... + */ +#define CONFIG_SYS_NPE_NUMS 1 +#ifdef CONFIG_HAS_ETH1 +#undef CONFIG_SYS_NPE_NUMS +#define CONFIG_SYS_NPE_NUMS 2 +#endif + +#define NPE_NUM_PORTS 3 +#define ACTIVE_PORTS 1 + +#define NPE_PKT_SIZE 1600 + +#define CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS 64 +#define CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS 2 + +#define NPE_MBUF_POOL_SIZE \ + ((CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS + \ + CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS) * \ + sizeof(IX_OSAL_MBUF) * ACTIVE_PORTS) + +#define NPE_PKT_POOL_SIZE \ + ((CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS + \ + CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS) * \ + NPE_PKT_SIZE * ACTIVE_PORTS) + +#define NPE_MEM_POOL_SIZE (NPE_MBUF_POOL_SIZE + NPE_PKT_POOL_SIZE) + +#define PHY_AUTONEGOTIATE_TIMEOUT 4000 /* 4000 ms autonegotiate timeout */ + +/* + * structs... + */ +struct npe { + u8 active; /* NPE active */ + u8 eth_id; /* IX_ETH_PORT_1 or IX_ETH_PORT_2 */ + u8 phy_no; /* which PHY (0 - 31) */ + u8 mac_address[6]; + + IX_OSAL_MBUF *rxQHead; + IX_OSAL_MBUF *txQHead; + + u8 *tx_pkts; + u8 *rx_pkts; + IX_OSAL_MBUF *rx_mbufs; + IX_OSAL_MBUF *tx_mbufs; + + int print_speed; + + int rx_read; + int rx_write; + int rx_len[PKTBUFSRX]; +}; + +/* + * prototypes... + */ +extern int npe_miiphy_read (const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value); +extern int npe_miiphy_write (const char *devname, unsigned char addr, + unsigned char reg, unsigned short value); + +#endif /* ifndef NPE_H */ diff --git a/drivers/net/npe/include/os_datatypes.h b/drivers/net/npe/include/os_datatypes.h new file mode 100644 index 0000000000..4387b2a052 --- /dev/null +++ b/drivers/net/npe/include/os_datatypes.h @@ -0,0 +1,82 @@ +/** + * ============================================================================ + * = COPYRIGHT + * + * @par + * IXP400 SW Release version 2.0 + * + * -- Copyright Notice -- + * + * @par + * Copyright 2001-2005, Intel Corporation. + * All rights reserved. + * + * @par + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Intel Corporation nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * @par + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @par + * -- End of Copyright Notice -- + * = PRODUCT + * Intel(r) IXP425 Software Release + * + * = LIBRARY + * OSSL - Operating System Services Library + * + * = MODULE + * OS Specific Data Types header file + * + * = FILENAME + * OSSL.h (Replaced by OSAL) + * + * = DESCRIPTION + * This file contains definitions and encapsulations for OS specific data types. These + * encapsulated data types are used by OSSL header files and OS API functions. + * + * + ********************************************************************** + * + * + * = AUTHOR + * Intel Corporation + * + * = AKNOWLEDGEMENTS + * + * + * = CREATION TIME + * 1/8/2002 1:53:42 PM + * + * = CHANGE HISTORY + + * ============================================================================ + */ + +#ifndef _OS_DATATYPES_H +#define _OS_DATATYPES_H + +#include "IxOsalBackward.h" + +#endif /* _OS_DATATYPES_H */ + diff --git a/drivers/net/npe/miiphy.c b/drivers/net/npe/miiphy.c new file mode 100644 index 0000000000..a04779ab46 --- /dev/null +++ b/drivers/net/npe/miiphy.c @@ -0,0 +1,120 @@ +/*-----------------------------------------------------------------------------+ + | This source code is dual-licensed. You may use it under the terms of the + | GNU General Public License version 2, or under the license below. + | + | This source code has been made available to you by IBM on an AS-IS + | basis. Anyone receiving this source is licensed under IBM + | copyrights to use it in any way he or she deems fit, including + | copying it, modifying it, compiling it, and redistributing it either + | with or without modifications. No license under IBM patents or + | patent applications is to be implied by the copyright license. + | + | Any user of this software should understand that IBM cannot provide + | technical support for this software and will not be responsible for + | any consequences resulting from the use of this software. + | + | Any person who transfers this source code or any derivative work + | must include the IBM copyright notice, this paragraph, and the + | preceding two paragraphs in the transferred software. + | + | COPYRIGHT I B M CORPORATION 1995 + | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + +-----------------------------------------------------------------------------*/ +/*-----------------------------------------------------------------------------+ + | + | File Name: miiphy.c + | + | Function: This module has utilities for accessing the MII PHY through + | the EMAC3 macro. + | + | Author: Mark Wisner + | + | Change Activity- + | + | Date Description of Change BY + | --------- --------------------- --- + | 05-May-99 Created MKW + | 01-Jul-99 Changed clock setting of sta_reg from 66MHz to 50MHz to + | better match OPB speed. Also modified delay times. JWB + | 29-Jul-99 Added Full duplex support MKW + | 24-Aug-99 Removed printf from dp83843_duplex() JWB + | 19-Jul-00 Ported to esd cpci405 sr + | 23-Dec-03 Ported from miiphy.c to 440GX Travis Sawyer TBS + | <travis.sawyer@sandburst.com> + | + +-----------------------------------------------------------------------------*/ + +#include <common.h> +#include <miiphy.h> +#include "IxOsal.h" +#include "IxEthAcc.h" +#include "IxEthAcc_p.h" +#include "IxEthAccMac_p.h" +#include "IxEthAccMii_p.h" + +/***********************************************************/ +/* Dump out to the screen PHY regs */ +/***********************************************************/ + +void miiphy_dump (char *devname, unsigned char addr) +{ + unsigned long i; + unsigned short data; + + + for (i = 0; i < 0x1A; i++) { + if (miiphy_read (devname, addr, i, &data)) { + printf ("read error for reg %lx\n", i); + return; + } + printf ("Phy reg %lx ==> %4x\n", i, data); + + /* jump to the next set of regs */ + if (i == 0x07) + i = 0x0f; + + } /* end for loop */ +} /* end dump */ + + +/***********************************************************/ +/* (Re)start autonegotiation */ +/***********************************************************/ +int phy_setup_aneg (char *devname, unsigned char addr) +{ + unsigned short ctl, adv; + + /* Setup standard advertise */ + miiphy_read (devname, addr, MII_ADVERTISE, &adv); + adv |= (LPA_LPACK | LPA_RFAULT | LPA_100BASE4 | + LPA_100FULL | LPA_100HALF | LPA_10FULL | + LPA_10HALF); + miiphy_write (devname, addr, MII_ADVERTISE, adv); + + /* Start/Restart aneg */ + miiphy_read (devname, addr, MII_BMCR, &ctl); + ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + miiphy_write (devname, addr, MII_BMCR, ctl); + + return 0; +} + + +int npe_miiphy_read (const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + u16 val; + + ixEthAccMiiReadRtn(addr, reg, &val); + *value = val; + + return 0; +} /* phy_read */ + + +int npe_miiphy_write (const char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + ixEthAccMiiWriteRtn(addr, reg, value); + return 0; +} /* phy_write */ diff --git a/drivers/net/npe/npe.c b/drivers/net/npe/npe.c new file mode 100644 index 0000000000..1fe3a95eaf --- /dev/null +++ b/drivers/net/npe/npe.c @@ -0,0 +1,696 @@ +/* + * (C) Copyright 2005-2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#if 0 +#define DEBUG /* define for debug output */ +#endif + +#include <config.h> +#include <common.h> +#include <net.h> +#include <miiphy.h> +#include <malloc.h> +#include <asm/processor.h> +#include <asm/arch-ixp/ixp425.h> + +#include <IxOsal.h> +#include <IxEthAcc.h> +#include <IxEthDB.h> +#include <IxNpeDl.h> +#include <IxQMgr.h> +#include <IxNpeMh.h> +#include <ix_ossl.h> +#include <IxFeatureCtrl.h> + +#include <npe.h> + +static IxQMgrDispatcherFuncPtr qDispatcherFunc = NULL; +static int npe_exists[NPE_NUM_PORTS]; +static int npe_used[NPE_NUM_PORTS]; + +/* A little extra so we can align to cacheline. */ +static u8 npe_alloc_pool[NPE_MEM_POOL_SIZE + CONFIG_SYS_CACHELINE_SIZE - 1]; +static u8 *npe_alloc_end; +static u8 *npe_alloc_free; + +static void *npe_alloc(int size) +{ + static int count = 0; + void *p = NULL; + + size = (size + (CONFIG_SYS_CACHELINE_SIZE-1)) & ~(CONFIG_SYS_CACHELINE_SIZE-1); + count++; + + if ((npe_alloc_free + size) < npe_alloc_end) { + p = npe_alloc_free; + npe_alloc_free += size; + } else { + printf("npe_alloc: failed (count=%d, size=%d)!\n", count, size); + } + return p; +} + +/* Not interrupt safe! */ +static void mbuf_enqueue(IX_OSAL_MBUF **q, IX_OSAL_MBUF *new) +{ + IX_OSAL_MBUF *m = *q; + + IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(new) = NULL; + + if (m) { + while(IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m)) + m = IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m); + IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m) = new; + } else + *q = new; +} + +/* Not interrupt safe! */ +static IX_OSAL_MBUF *mbuf_dequeue(IX_OSAL_MBUF **q) +{ + IX_OSAL_MBUF *m = *q; + if (m) + *q = IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m); + return m; +} + +static void reset_tx_mbufs(struct npe* p_npe) +{ + IX_OSAL_MBUF *m; + int i; + + p_npe->txQHead = NULL; + + for (i = 0; i < CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS; i++) { + m = &p_npe->tx_mbufs[i]; + + memset(m, 0, sizeof(*m)); + + IX_OSAL_MBUF_MDATA(m) = (void *)&p_npe->tx_pkts[i * NPE_PKT_SIZE]; + IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; + mbuf_enqueue(&p_npe->txQHead, m); + } +} + +static void reset_rx_mbufs(struct npe* p_npe) +{ + IX_OSAL_MBUF *m; + int i; + + p_npe->rxQHead = NULL; + + HAL_DCACHE_INVALIDATE(p_npe->rx_pkts, NPE_PKT_SIZE * + CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS); + + for (i = 0; i < CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS; i++) { + m = &p_npe->rx_mbufs[i]; + + memset(m, 0, sizeof(*m)); + + IX_OSAL_MBUF_MDATA(m) = (void *)&p_npe->rx_pkts[i * NPE_PKT_SIZE]; + IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; + + if(ixEthAccPortRxFreeReplenish(p_npe->eth_id, m) != IX_SUCCESS) { + printf("ixEthAccPortRxFreeReplenish failed for port %d\n", p_npe->eth_id); + break; + } + } +} + +static void init_rx_mbufs(struct npe* p_npe) +{ + p_npe->rxQHead = NULL; + + p_npe->rx_pkts = npe_alloc(NPE_PKT_SIZE * + CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS); + if (p_npe->rx_pkts == NULL) { + printf("alloc of packets failed.\n"); + return; + } + + p_npe->rx_mbufs = (IX_OSAL_MBUF *) + npe_alloc(sizeof(IX_OSAL_MBUF) * + CONFIG_DEVS_ETH_INTEL_NPE_MAX_RX_DESCRIPTORS); + if (p_npe->rx_mbufs == NULL) { + printf("alloc of mbufs failed.\n"); + return; + } + + reset_rx_mbufs(p_npe); +} + +static void init_tx_mbufs(struct npe* p_npe) +{ + p_npe->tx_pkts = npe_alloc(NPE_PKT_SIZE * + CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS); + if (p_npe->tx_pkts == NULL) { + printf("alloc of packets failed.\n"); + return; + } + + p_npe->tx_mbufs = (IX_OSAL_MBUF *) + npe_alloc(sizeof(IX_OSAL_MBUF) * + CONFIG_DEVS_ETH_INTEL_NPE_MAX_TX_DESCRIPTORS); + if (p_npe->tx_mbufs == NULL) { + printf("alloc of mbufs failed.\n"); + return; + } + + reset_tx_mbufs(p_npe); +} + +/* Convert IX_ETH_PORT_n to IX_NPEMH_NPEID_NPEx */ +static int __eth_to_npe(int eth_id) +{ + switch(eth_id) { + case IX_ETH_PORT_1: + return IX_NPEMH_NPEID_NPEB; + + case IX_ETH_PORT_2: + return IX_NPEMH_NPEID_NPEC; + + case IX_ETH_PORT_3: + return IX_NPEMH_NPEID_NPEA; + } + return 0; +} + +/* Poll the CSR machinery. */ +static void npe_poll(int eth_id) +{ + if (qDispatcherFunc != NULL) { + ixNpeMhMessagesReceive(__eth_to_npe(eth_id)); + (*qDispatcherFunc)(IX_QMGR_QUELOW_GROUP); + } +} + +/* ethAcc RX callback */ +static void npe_rx_callback(u32 cbTag, IX_OSAL_MBUF *m, IxEthAccPortId portid) +{ + struct npe* p_npe = (struct npe *)cbTag; + + if (IX_OSAL_MBUF_MLEN(m) > 0) { + mbuf_enqueue(&p_npe->rxQHead, m); + + if (p_npe->rx_write == ((p_npe->rx_read-1) & (PKTBUFSRX-1))) { + debug("Rx overflow: rx_write=%d rx_read=%d\n", + p_npe->rx_write, p_npe->rx_read); + } else { + debug("Received message #%d (len=%d)\n", p_npe->rx_write, + IX_OSAL_MBUF_MLEN(m)); + memcpy((void *)NetRxPackets[p_npe->rx_write], IX_OSAL_MBUF_MDATA(m), + IX_OSAL_MBUF_MLEN(m)); + p_npe->rx_len[p_npe->rx_write] = IX_OSAL_MBUF_MLEN(m); + p_npe->rx_write++; + if (p_npe->rx_write == PKTBUFSRX) + p_npe->rx_write = 0; + +#ifdef CONFIG_PRINT_RX_FRAMES + { + u8 *ptr = IX_OSAL_MBUF_MDATA(m); + int i; + + for (i=0; i<60; i++) { + debug("%02x ", *ptr++); + } + debug("\n"); + } +#endif + } + + m = mbuf_dequeue(&p_npe->rxQHead); + } else { + debug("Received frame with length 0!!!\n"); + m = mbuf_dequeue(&p_npe->rxQHead); + } + + /* Now return mbuf to NPE */ + IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m) = NULL; + IX_OSAL_MBUF_FLAGS(m) = 0; + + if(ixEthAccPortRxFreeReplenish(p_npe->eth_id, m) != IX_SUCCESS) { + debug("npe_rx_callback: Error returning mbuf.\n"); + } +} + +/* ethAcc TX callback */ +static void npe_tx_callback(u32 cbTag, IX_OSAL_MBUF *m) +{ + struct npe* p_npe = (struct npe *)cbTag; + + debug("%s\n", __FUNCTION__); + + IX_OSAL_MBUF_MLEN(m) = IX_OSAL_MBUF_PKT_LEN(m) = NPE_PKT_SIZE; + IX_OSAL_MBUF_NEXT_BUFFER_IN_PKT_PTR(m) = NULL; + IX_OSAL_MBUF_FLAGS(m) = 0; + + mbuf_enqueue(&p_npe->txQHead, m); +} + + +static int npe_set_mac_address(struct eth_device *dev) +{ + struct npe *p_npe = (struct npe *)dev->priv; + IxEthAccMacAddr npeMac; + + debug("%s\n", __FUNCTION__); + + /* Set MAC address */ + memcpy(npeMac.macAddress, dev->enetaddr, 6); + + if (ixEthAccPortUnicastMacAddressSet(p_npe->eth_id, &npeMac) != IX_ETH_ACC_SUCCESS) { + printf("Error setting unicast address! %02x:%02x:%02x:%02x:%02x:%02x\n", + npeMac.macAddress[0], npeMac.macAddress[1], + npeMac.macAddress[2], npeMac.macAddress[3], + npeMac.macAddress[4], npeMac.macAddress[5]); + return 0; + } + + return 1; +} + +/* Boot-time CSR library initialization. */ +static int npe_csr_load(void) +{ + int i; + + if (ixQMgrInit() != IX_SUCCESS) { + debug("Error initialising queue manager!\n"); + return 0; + } + + ixQMgrDispatcherLoopGet(&qDispatcherFunc); + + if(ixNpeMhInitialize(IX_NPEMH_NPEINTERRUPTS_YES) != IX_SUCCESS) { + printf("Error initialising NPE Message handler!\n"); + return 0; + } + + if (npe_used[IX_ETH_PORT_1] && npe_exists[IX_ETH_PORT_1] && + ixNpeDlNpeInitAndStart(IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS) + != IX_SUCCESS) { + printf("Error downloading firmware to NPE-B!\n"); + return 0; + } + + if (npe_used[IX_ETH_PORT_2] && npe_exists[IX_ETH_PORT_2] && + ixNpeDlNpeInitAndStart(IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS) + != IX_SUCCESS) { + printf("Error downloading firmware to NPE-C!\n"); + return 0; + } + + /* don't need this for U-Boot */ + ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, FALSE); + + if (ixEthAccInit() != IX_ETH_ACC_SUCCESS) { + printf("Error initialising Ethernet access driver!\n"); + return 0; + } + + for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++) { + if (!npe_used[i] || !npe_exists[i]) + continue; + if (ixEthAccPortInit(i) != IX_ETH_ACC_SUCCESS) { + printf("Error initialising Ethernet port%d!\n", i); + } + if (ixEthAccTxSchedulingDisciplineSet(i, FIFO_NO_PRIORITY) != IX_ETH_ACC_SUCCESS) { + printf("Error setting scheduling discipline for port %d.\n", i); + } + if (ixEthAccPortRxFrameAppendFCSDisable(i) != IX_ETH_ACC_SUCCESS) { + printf("Error disabling RX FCS for port %d.\n", i); + } + if (ixEthAccPortTxFrameAppendFCSEnable(i) != IX_ETH_ACC_SUCCESS) { + printf("Error enabling TX FCS for port %d.\n", i); + } + } + + return 1; +} + +static int npe_init(struct eth_device *dev, bd_t * bis) +{ + struct npe *p_npe = (struct npe *)dev->priv; + int i; + u16 reg_short; + int speed; + int duplex; + + debug("%s: 1\n", __FUNCTION__); + +#ifdef CONFIG_MII_NPE0_FIXEDLINK + if (0 == p_npe->eth_id) { + speed = CONFIG_MII_NPE0_SPEED; + duplex = CONFIG_MII_NPE0_FULLDUPLEX ? FULL : HALF; + } else +#endif +#ifdef CONFIG_MII_NPE1_FIXEDLINK + if (1 == p_npe->eth_id) { + speed = CONFIG_MII_NPE1_SPEED; + duplex = CONFIG_MII_NPE1_FULLDUPLEX ? FULL : HALF; + } else +#endif + { + miiphy_read(dev->name, p_npe->phy_no, MII_BMSR, ®_short); + + /* + * Wait if PHY is capable of autonegotiation and + * autonegotiation is not complete + */ + if ((reg_short & BMSR_ANEGCAPABLE) && + !(reg_short & BMSR_ANEGCOMPLETE)) { + puts("Waiting for PHY auto negotiation to complete"); + i = 0; + while (!(reg_short & BMSR_ANEGCOMPLETE)) { + /* + * Timeout reached ? + */ + if (i > PHY_AUTONEGOTIATE_TIMEOUT) { + puts(" TIMEOUT !\n"); + break; + } + + if ((i++ % 1000) == 0) { + putc('.'); + miiphy_read(dev->name, p_npe->phy_no, + MII_BMSR, ®_short); + } + udelay(1000); /* 1 ms */ + } + puts(" done\n"); + /* another 500 ms (results in faster booting) */ + udelay(500000); + } + speed = miiphy_speed(dev->name, p_npe->phy_no); + duplex = miiphy_duplex(dev->name, p_npe->phy_no); + } + + if (p_npe->print_speed) { + p_npe->print_speed = 0; + printf ("ENET Speed is %d Mbps - %s duplex connection\n", + (int) speed, (duplex == HALF) ? "HALF" : "FULL"); + } + + npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool); + npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool + + CONFIG_SYS_CACHELINE_SIZE - 1) & ~(CONFIG_SYS_CACHELINE_SIZE - 1)); + + /* initialize mbuf pool */ + init_rx_mbufs(p_npe); + init_tx_mbufs(p_npe); + + if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_callback, + (u32)p_npe) != IX_ETH_ACC_SUCCESS) { + printf("can't register RX callback!\n"); + return -1; + } + + if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_callback, + (u32)p_npe) != IX_ETH_ACC_SUCCESS) { + printf("can't register TX callback!\n"); + return -1; + } + + npe_set_mac_address(dev); + + if (ixEthAccPortEnable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) { + printf("can't enable port!\n"); + return -1; + } + + p_npe->active = 1; + + return 0; +} + +#if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */ +/* Uninitialize CSR library. */ +static void npe_csr_unload(void) +{ + ixEthAccUnload(); + ixEthDBUnload(); + ixNpeMhUnload(); + ixQMgrUnload(); +} + +/* callback which is used by ethAcc to recover RX buffers when stopping */ +static void npe_rx_stop_callback(u32 cbTag, IX_OSAL_MBUF *m, IxEthAccPortId portid) +{ + debug("%s\n", __FUNCTION__); +} + +/* callback which is used by ethAcc to recover TX buffers when stopping */ +static void npe_tx_stop_callback(u32 cbTag, IX_OSAL_MBUF *m) +{ + debug("%s\n", __FUNCTION__); +} +#endif + +static void npe_halt(struct eth_device *dev) +{ + struct npe *p_npe = (struct npe *)dev->priv; + int i; + + debug("%s\n", __FUNCTION__); + + /* Delay to give time for recovery of mbufs */ + for (i = 0; i < 100; i++) { + npe_poll(p_npe->eth_id); + udelay(100); + } + +#if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */ + if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_stop_callback, + (u32)p_npe) != IX_ETH_ACC_SUCCESS) { + debug("Error registering rx callback!\n"); + } + + if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_stop_callback, + (u32)p_npe) != IX_ETH_ACC_SUCCESS) { + debug("Error registering tx callback!\n"); + } + + if (ixEthAccPortDisable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) { + debug("npe_stop: Error disabling NPEB!\n"); + } + + /* Delay to give time for recovery of mbufs */ + for (i = 0; i < 100; i++) { + npe_poll(p_npe->eth_id); + udelay(10000); + } + + /* + * For U-Boot only, we are probably launching Linux or other OS that + * needs a clean slate for its NPE library. + */ +#if 0 /* test-only */ + for (i = 0; i < IX_ETH_ACC_NUMBER_OF_PORTS; i++) { + if (npe_used[i] && npe_exists[i]) + if (ixNpeDlNpeStopAndReset(__eth_to_npe(i)) != IX_SUCCESS) + printf("Failed to stop and reset NPE B.\n"); + } +#endif + +#endif + p_npe->active = 0; +} + + +static int npe_send(struct eth_device *dev, void *packet, int len) +{ + struct npe *p_npe = (struct npe *)dev->priv; + u8 *dest; + int err; + IX_OSAL_MBUF *m; + + debug("%s\n", __FUNCTION__); + m = mbuf_dequeue(&p_npe->txQHead); + dest = IX_OSAL_MBUF_MDATA(m); + IX_OSAL_MBUF_PKT_LEN(m) = IX_OSAL_MBUF_MLEN(m) = len; + IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(m) = NULL; + + memcpy(dest, (char *)packet, len); + + if ((err = ixEthAccPortTxFrameSubmit(p_npe->eth_id, m, IX_ETH_ACC_TX_DEFAULT_PRIORITY)) + != IX_ETH_ACC_SUCCESS) { + printf("npe_send: Can't submit frame. err[%d]\n", err); + mbuf_enqueue(&p_npe->txQHead, m); + return 0; + } + +#ifdef DEBUG_PRINT_TX_FRAMES + { + u8 *ptr = IX_OSAL_MBUF_MDATA(m); + int i; + + for (i=0; i<IX_OSAL_MBUF_MLEN(m); i++) { + printf("%02x ", *ptr++); + } + printf(" (tx-len=%d)\n", IX_OSAL_MBUF_MLEN(m)); + } +#endif + + npe_poll(p_npe->eth_id); + + return len; +} + +static int npe_rx(struct eth_device *dev) +{ + struct npe *p_npe = (struct npe *)dev->priv; + + debug("%s\n", __FUNCTION__); + npe_poll(p_npe->eth_id); + + debug("%s: rx_write=%d rx_read=%d\n", __FUNCTION__, p_npe->rx_write, p_npe->rx_read); + while (p_npe->rx_write != p_npe->rx_read) { + debug("Reading message #%d\n", p_npe->rx_read); + NetReceive(NetRxPackets[p_npe->rx_read], p_npe->rx_len[p_npe->rx_read]); + p_npe->rx_read++; + if (p_npe->rx_read == PKTBUFSRX) + p_npe->rx_read = 0; + } + + return 0; +} + +int npe_initialize(bd_t * bis) +{ + static int virgin = 0; + struct eth_device *dev; + int eth_num = 0; + struct npe *p_npe = NULL; + uchar enetaddr[6]; + + for (eth_num = 0; eth_num < CONFIG_SYS_NPE_NUMS; eth_num++) { + + /* See if we can actually bring up the interface, otherwise, skip it */ +#ifdef CONFIG_HAS_ETH1 + if (eth_num == 1) { + if (!eth_getenv_enetaddr("eth1addr", enetaddr)) + continue; + } else +#endif + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) + continue; + + /* Allocate device structure */ + dev = (struct eth_device *)malloc(sizeof(*dev)); + if (dev == NULL) { + printf ("%s: Cannot allocate eth_device %d\n", __FUNCTION__, eth_num); + return -1; + } + memset(dev, 0, sizeof(*dev)); + + /* Allocate our private use data */ + p_npe = (struct npe *)malloc(sizeof(struct npe)); + if (p_npe == NULL) { + printf("%s: Cannot allocate private hw data for eth_device %d", + __FUNCTION__, eth_num); + free(dev); + return -1; + } + memset(p_npe, 0, sizeof(struct npe)); + + p_npe->eth_id = eth_num; + memcpy(dev->enetaddr, enetaddr, 6); +#ifdef CONFIG_HAS_ETH1 + if (eth_num == 1) + p_npe->phy_no = CONFIG_PHY1_ADDR; + else +#endif + p_npe->phy_no = CONFIG_PHY_ADDR; + + sprintf(dev->name, "NPE%d", eth_num); + dev->priv = (void *)p_npe; + dev->init = npe_init; + dev->halt = npe_halt; + dev->send = npe_send; + dev->recv = npe_rx; + + p_npe->print_speed = 1; + + if (0 == virgin) { + virgin = 1; + + if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X) { + switch (ixFeatureCtrlProductIdRead() & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) { + case IX_FEATURE_CTRL_SILICON_TYPE_B0: + default: /* newer than B0 */ + /* + * If it is B0 or newer Silicon, we + * only enable port when its + * corresponding Eth Coprocessor is + * available. + */ + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == + IX_FEATURE_CTRL_COMPONENT_ENABLED) + npe_exists[IX_ETH_PORT_1] = TRUE; + + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == + IX_FEATURE_CTRL_COMPONENT_ENABLED) + npe_exists[IX_ETH_PORT_2] = TRUE; + break; + case IX_FEATURE_CTRL_SILICON_TYPE_A0: + /* + * If it is A0 Silicon, we enable both as both Eth Coprocessors + * are available. + */ + npe_exists[IX_ETH_PORT_1] = TRUE; + npe_exists[IX_ETH_PORT_2] = TRUE; + break; + } + } else if (ixFeatureCtrlDeviceRead() == IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X) { + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0) == + IX_FEATURE_CTRL_COMPONENT_ENABLED) + npe_exists[IX_ETH_PORT_1] = TRUE; + + if (ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH1) == + IX_FEATURE_CTRL_COMPONENT_ENABLED) + npe_exists[IX_ETH_PORT_2] = TRUE; + } + + npe_used[IX_ETH_PORT_1] = 1; + npe_used[IX_ETH_PORT_2] = 1; + + npe_alloc_end = npe_alloc_pool + sizeof(npe_alloc_pool); + npe_alloc_free = (u8 *)(((unsigned)npe_alloc_pool + + CONFIG_SYS_CACHELINE_SIZE - 1) + & ~(CONFIG_SYS_CACHELINE_SIZE - 1)); + + if (!npe_csr_load()) + return 0; + } + + eth_register(dev); + +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) + miiphy_register(dev->name, npe_miiphy_read, npe_miiphy_write); +#endif + + } /* end for each supported device */ + + return 1; +} |