9 files changed, 421 insertions, 8 deletions

diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c
index 41b179fc54..bfde692176 100644
--- a/drivers/power/battery/bat_trats.c
+++ b/drivers/power/battery/bat_trats.c
@@ -19,7 +19,7 @@ static int power_battery_charge(struct pmic *bat)
 	struct battery *battery = p_bat->bat;
 	int k;
 
-	if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+	if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
 		return -1;
 
 	for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
@@ -42,7 +42,7 @@ static int power_battery_charge(struct pmic *bat)
 		}
 	}
  exit:
-	bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
+	bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_DISABLE, 0);
 
 	return 0;
 }
diff --git a/drivers/power/battery/bat_trats2.c b/drivers/power/battery/bat_trats2.c
index 94015aa41a..57221adf81 100644
--- a/drivers/power/battery/bat_trats2.c
+++ b/drivers/power/battery/bat_trats2.c
@@ -17,7 +17,7 @@ static int power_battery_charge(struct pmic *bat)
 {
 	struct power_battery *p_bat = bat->pbat;
 
-	if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+	if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
 		return -1;
 
 	return 0;
diff --git a/drivers/power/mfd/pmic_max77693.c b/drivers/power/mfd/pmic_max77693.c
index 1a4416b54f..6b28e28b3f 100644
--- a/drivers/power/mfd/pmic_max77693.c
+++ b/drivers/power/mfd/pmic_max77693.c
@@ -22,7 +22,7 @@ static int max77693_charger_state(struct pmic *p, int state, int current)
 	val = MAX77693_CHG_UNLOCK;
 	pmic_reg_write(p, MAX77693_CHG_CNFG_06, val);
 
-	if (state == CHARGER_DISABLE) {
+	if (state == PMIC_CHARGER_DISABLE) {
 		puts("Disable the charger.\n");
 		pmic_reg_read(p, MAX77693_CHG_CNFG_00, &val);
 		val &= ~0x01;
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 920bbdce6e..a472f61f88 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -11,5 +11,7 @@ obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
 obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
 obj-$(CONFIG_POWER_MAX77686) += pmic_max77686.o
 obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
+obj-$(CONFIG_POWER_TPS65090) += pmic_tps65090.o
 obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
+obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
 obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
diff --git a/drivers/power/pmic/pmic_max8997.c b/drivers/power/pmic/pmic_max8997.c
index ba01692327..a36a9a08bf 100644
--- a/drivers/power/pmic/pmic_max8997.c
+++ b/drivers/power/pmic/pmic_max8997.c
@@ -35,7 +35,7 @@ static int pmic_charger_state(struct pmic *p, int state, int current)
 	if (pmic_probe(p))
 		return -1;
 
-	if (state == CHARGER_DISABLE) {
+	if (state == PMIC_CHARGER_DISABLE) {
 		puts("Disable the charger.\n");
 		pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
 		val &= ~(MBCHOSTEN | VCHGR_FC);
diff --git a/drivers/power/pmic/pmic_tps65090.c b/drivers/power/pmic/pmic_tps65090.c
new file mode 100644
index 0000000000..c5b396610a
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65090.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/tps65090_pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TPS65090_NAME "TPS65090_PMIC"
+
+/* TPS65090 register addresses */
+enum {
+	REG_IRQ1 = 0,
+	REG_CG_CTRL0 = 4,
+	REG_CG_STATUS1 = 0xa,
+	REG_FET1_CTRL = 0x0f,
+	REG_FET2_CTRL,
+	REG_FET3_CTRL,
+	REG_FET4_CTRL,
+	REG_FET5_CTRL,
+	REG_FET6_CTRL,
+	REG_FET7_CTRL,
+	TPS65090_NUM_REGS,
+};
+
+enum {
+	IRQ1_VBATG = 1 << 3,
+	CG_CTRL0_ENC_MASK	= 0x01,
+
+	MAX_FET_NUM	= 7,
+	MAX_CTRL_READ_TRIES = 5,
+
+	/* TPS65090 FET_CTRL register values */
+	FET_CTRL_TOFET		= 1 << 7,  /* Timeout, startup, overload */
+	FET_CTRL_PGFET		= 1 << 4,  /* Power good for FET status */
+	FET_CTRL_WAIT		= 3 << 2,  /* Overcurrent timeout max */
+	FET_CTRL_ADENFET	= 1 << 1,  /* Enable output auto discharge */
+	FET_CTRL_ENFET		= 1 << 0,  /* Enable FET */
+};
+
+/**
+ * Checks for a valid FET number
+ *
+ * @param fet_id	FET number to check
+ * @return 0 if ok, -EINVAL if FET value is out of range
+ */
+static int tps65090_check_fet(unsigned int fet_id)
+{
+	if (fet_id == 0 || fet_id > MAX_FET_NUM) {
+		debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
+		      fet_id, MAX_FET_NUM);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * Set the power state for a FET
+ *
+ * @param pmic		pmic structure for the tps65090
+ * @param fet_id	Fet number to set (1..MAX_FET_NUM)
+ * @param set		1 to power on FET, 0 to power off
+ * @return -EIO if we got a comms error, -EAGAIN if the FET failed to
+ * change state. If all is ok, returns 0.
+ */
+static int tps65090_fet_set(struct pmic *pmic, int fet_id, bool set)
+{
+	int retry;
+	u32 reg, value;
+
+	value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
+	if (set)
+		value |= FET_CTRL_ENFET;
+
+	if (pmic_reg_write(pmic, REG_FET1_CTRL + fet_id - 1, value))
+		return -EIO;
+
+	/* Try reading until we get a result */
+	for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
+		if (pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg))
+			return -EIO;
+
+		/* Check that the fet went into the expected state */
+		if (!!(reg & FET_CTRL_PGFET) == set)
+			return 0;
+
+		/* If we got a timeout, there is no point in waiting longer */
+		if (reg & FET_CTRL_TOFET)
+			break;
+
+		mdelay(1);
+	}
+
+	debug("FET %d: Power good should have set to %d but reg=%#02x\n",
+	      fet_id, set, reg);
+	return -EAGAIN;
+}
+
+int tps65090_fet_enable(unsigned int fet_id)
+{
+	struct pmic *pmic;
+	ulong start;
+	int loops;
+	int ret;
+
+	ret = tps65090_check_fet(fet_id);
+	if (ret)
+		return ret;
+
+	pmic = pmic_get(TPS65090_NAME);
+	if (!pmic)
+		return -EACCES;
+
+	start = get_timer(0);
+	for (loops = 0;; loops++) {
+		ret = tps65090_fet_set(pmic, fet_id, true);
+		if (!ret)
+			break;
+
+		if (get_timer(start) > 100)
+			break;
+
+		/* Turn it off and try again until we time out */
+		tps65090_fet_set(pmic, fet_id, false);
+	}
+
+	if (ret)
+		debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
+		      __func__, fet_id, get_timer(start), loops);
+	else if (loops)
+		debug("%s: FET%d powered on after %lums, loops=%d\n",
+		      __func__, fet_id, get_timer(start), loops);
+
+	/*
+	 * Unfortunately, there are some conditions where the power
+	 * good bit will be 0, but the fet still comes up. One such
+	 * case occurs with the lcd backlight. We'll just return 0 here
+	 * and assume that the fet will eventually come up.
+	 */
+	if (ret == -EAGAIN)
+		ret = 0;
+
+	return ret;
+}
+
+int tps65090_fet_disable(unsigned int fet_id)
+{
+	struct pmic *pmic;
+	int ret;
+
+	ret = tps65090_check_fet(fet_id);
+	if (ret)
+		return ret;
+
+	pmic = pmic_get(TPS65090_NAME);
+	if (!pmic)
+		return -EACCES;
+	ret = tps65090_fet_set(pmic, fet_id, false);
+
+	return ret;
+}
+
+int tps65090_fet_is_enabled(unsigned int fet_id)
+{
+	struct pmic *pmic;
+	u32 reg;
+	int ret;
+
+	ret = tps65090_check_fet(fet_id);
+	if (ret)
+		return ret;
+
+	pmic = pmic_get(TPS65090_NAME);
+	if (!pmic)
+		return -ENODEV;
+	ret = pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg);
+	if (ret) {
+		debug("fail to read FET%u_CTRL register over I2C", fet_id);
+		return -EIO;
+	}
+
+	return reg & FET_CTRL_ENFET;
+}
+
+int tps65090_get_charging(void)
+{
+	struct pmic *pmic;
+	u32 val;
+	int ret;
+
+	pmic = pmic_get(TPS65090_NAME);
+	if (!pmic)
+		return -EACCES;
+
+	ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & CG_CTRL0_ENC_MASK);
+}
+
+static int tps65090_charger_state(struct pmic *pmic, int state,
+				  int current)
+{
+	u32 val;
+	int ret;
+
+	ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
+	if (!ret) {
+		if (state == PMIC_CHARGER_ENABLE)
+			val |= CG_CTRL0_ENC_MASK;
+		else
+			val &= ~CG_CTRL0_ENC_MASK;
+		ret = pmic_reg_write(pmic, REG_CG_CTRL0, val);
+	}
+	if (ret) {
+		debug("%s: Failed to read/write register\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+int tps65090_get_status(void)
+{
+	struct pmic *pmic;
+	u32 val;
+	int ret;
+
+	pmic = pmic_get(TPS65090_NAME);
+	if (!pmic)
+		return -EACCES;
+
+	ret = pmic_reg_read(pmic, REG_CG_STATUS1, &val);
+	if (ret)
+		return ret;
+
+	return val;
+}
+
+static int tps65090_charger_bat_present(struct pmic *pmic)
+{
+	u32 val;
+	int ret;
+
+	ret = pmic_reg_read(pmic, REG_IRQ1, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & IRQ1_VBATG);
+}
+
+static struct power_chrg power_chrg_pmic_ops = {
+	.chrg_bat_present = tps65090_charger_bat_present,
+	.chrg_state = tps65090_charger_state,
+};
+
+int tps65090_init(void)
+{
+	struct pmic *p;
+	int bus;
+	int addr;
+	const void *blob = gd->fdt_blob;
+	int node, parent;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_TI_TPS65090);
+	if (node < 0) {
+		debug("PMIC: No node for PMIC Chip in device tree\n");
+		debug("node = %d\n", node);
+		return -ENODEV;
+	}
+
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -EINVAL;
+	}
+
+	bus = i2c_get_bus_num_fdt(parent);
+	if (p->bus < 0) {
+		debug("%s: Cannot find I2C bus\n", __func__);
+		return -ENOENT;
+	}
+	addr = fdtdec_get_int(blob, node, "reg", TPS65090_I2C_ADDR);
+	p = pmic_alloc();
+	if (!p) {
+		printf("%s: POWER allocation error!\n", __func__);
+		return -ENOMEM;
+	}
+
+	p->name = TPS65090_NAME;
+	p->bus = bus;
+	p->interface = PMIC_I2C;
+	p->number_of_regs = TPS65090_NUM_REGS;
+	p->hw.i2c.addr = addr;
+	p->hw.i2c.tx_num = 1;
+	p->chrg = &power_chrg_pmic_ops;
+
+	puts("TPS65090 PMIC init\n");
+
+	return 0;
+}
diff --git a/drivers/power/pmic/pmic_tps65218.c b/drivers/power/pmic/pmic_tps65218.c
new file mode 100644
index 0000000000..0952456379
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65218.c
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2011-2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <power/tps65218.h>
+
+/**
+ *  tps65218_reg_write() - Generic function that can write a TPS65218 PMIC
+ *			   register or bit field regardless of protection
+ *			   level.
+ *
+ *  @prot_level:	   Register password protection.  Use
+ *			   TPS65218_PROT_LEVEL_NONE,
+ *			   TPS65218_PROT_LEVEL_1 or TPS65218_PROT_LEVEL_2
+ *  @dest_reg:		   Register address to write.
+ *  @dest_val:		   Value to write.
+ *  @mask:		   Bit mask (8 bits) to be applied.  Function will only
+ *			   change bits that are set in the bit mask.
+ *
+ *  @return:		   0 for success, not 0 on failure, as per the i2c API
+ */
+int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
+		       uchar mask)
+{
+	uchar read_val;
+	uchar xor_reg;
+	int ret;
+
+	/*
+	 * If we are affecting only a bit field, read dest_reg and apply the
+	 * mask
+	 */
+	if (mask != TPS65218_MASK_ALL_BITS) {
+		ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1);
+		if (ret)
+			return ret;
+		read_val &= (~mask);
+		read_val |= (dest_val & mask);
+		dest_val = read_val;
+	}
+
+	if (prot_level > 0) {
+		xor_reg = dest_reg ^ TPS65218_PASSWORD_UNLOCK;
+		ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
+				&xor_reg, 1);
+		if (ret)
+			return ret;
+	}
+
+	ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
+	if (ret)
+		return ret;
+
+	if (prot_level == TPS65218_PROT_LEVEL_2) {
+		ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
+				&xor_reg, 1);
+		if (ret)
+			return ret;
+
+		ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * tps65218_voltage_update() - Function to change a voltage level, as this
+ *			       is a multi-step process.
+ * @dc_cntrl_reg:	       DC voltage control register to change.
+ * @volt_sel:		       New value for the voltage register
+ * @return:		       0 for success, not 0 on failure.
+ */
+int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel)
+{
+	if ((dc_cntrl_reg != TPS65218_DCDC1) &&
+	    (dc_cntrl_reg != TPS65218_DCDC2))
+		return 1;
+
+	/* set voltage level */
+	if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, dc_cntrl_reg, volt_sel,
+			       TPS65218_MASK_ALL_BITS))
+		return 1;
+
+	/* set GO bit to initiate voltage transition */
+	if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, TPS65218_SLEW,
+			       TPS65218_DCDC_GO, TPS65218_DCDC_GO))
+		return 1;
+
+	return 0;
+}
diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
index ac0b541d79..a64161b243 100644
--- a/drivers/power/power_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -11,9 +11,9 @@
 #include <fsl_pmic.h>
 #include <errno.h>
 
-#if defined(CONFIG_PMIC_FSL_MC13892)
+#if defined(CONFIG_POWER_FSL_MC13892)
 #define FSL_PMIC_I2C_LENGTH	3
-#elif defined(CONFIG_PMIC_FSL_MC34704)
+#elif defined(CONFIG_POWER_FSL_MC34704)
 #define FSL_PMIC_I2C_LENGTH	1
 #endif
 
@@ -51,7 +51,7 @@ int pmic_init(unsigned char bus)
 	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
 	p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
 #else
-#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
+#error "You must select CONFIG_POWER_SPI or CONFIG_POWER_I2C"
 #endif
 
 	return 0;
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index ac768708ea..594cd11725 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -23,6 +23,8 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 	if (check_reg(p, reg))
 		return -1;
 
+	I2C_SET_BUS(p->bus);
+
 	switch (pmic_i2c_tx_num) {
 	case 3:
 		if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
@@ -66,6 +68,8 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 	if (check_reg(p, reg))
 		return -1;
 
+	I2C_SET_BUS(p->bus);
+
 	if (i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num))
 		return -1;