diff options
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/palmas.c | 2 | ||||
| -rw-r--r-- | drivers/power/power_i2c.c | 2 | ||||
| -rw-r--r-- | drivers/power/tps6586x.c | 27 | ||||
| -rw-r--r-- | drivers/power/twl4030.c | 28 |
4 files changed, 26 insertions, 33 deletions
diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c index cfbc9dc522..6430fe004d 100644 --- a/drivers/power/palmas.c +++ b/drivers/power/palmas.c @@ -27,7 +27,7 @@ int palmas_mmc1_poweron_ldo(void) { u8 val = 0; -#if defined(CONFIG_DRA7XX) +#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) /* * Currently valid for the dra7xx_evm board: * Set TPS659038 LDO1 to 3.0 V diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index 594cd11725..0dcf9fe918 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -14,7 +14,7 @@ #include <linux/types.h> #include <power/pmic.h> #include <i2c.h> -#include <compiler.h> +#include <linux/compiler.h> int pmic_reg_write(struct pmic *p, u32 reg, u32 val) { diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c index d29d969533..29bab4cc00 100644 --- a/drivers/power/tps6586x.c +++ b/drivers/power/tps6586x.c @@ -10,9 +10,7 @@ #include <asm/io.h> #include <i2c.h> -static int bus_num; /* I2C bus we are on */ -#define I2C_ADDRESS 0x34 /* chip requires this address */ -static char inited; /* 1 if we have been inited */ +static struct udevice *tps6586x_dev; enum { /* Registers that we access */ @@ -37,13 +35,9 @@ static int tps6586x_read(int reg) int i; uchar data; int retval = -1; - int old_bus_num; - - old_bus_num = i2c_get_bus_num(); - i2c_set_bus_num(bus_num); for (i = 0; i < MAX_I2C_RETRY; ++i) { - if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) { + if (!i2c_read(tps6586x_dev, reg, &data, 1)) { retval = (int)data; goto exit; } @@ -53,7 +47,6 @@ static int tps6586x_read(int reg) } exit: - i2c_set_bus_num(old_bus_num); debug("pmu_read %x=%x\n", reg, retval); if (retval < 0) debug("%s: failed to read register %#x: %d\n", __func__, reg, @@ -65,13 +58,9 @@ static int tps6586x_write(int reg, uchar *data, uint len) { int i; int retval = -1; - int old_bus_num; - - old_bus_num = i2c_get_bus_num(); - i2c_set_bus_num(bus_num); for (i = 0; i < MAX_I2C_RETRY; ++i) { - if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) { + if (!i2c_write(tps6586x_dev, reg, data, len)) { retval = 0; goto exit; } @@ -81,7 +70,6 @@ static int tps6586x_write(int reg, uchar *data, uint len) } exit: - i2c_set_bus_num(old_bus_num); debug("pmu_write %x=%x: ", reg, retval); for (i = 0; i < len; i++) debug("%x ", data[i]); @@ -163,7 +151,7 @@ int tps6586x_set_pwm_mode(int mask) uchar val; int ret; - assert(inited); + assert(tps6586x_dev); ret = tps6586x_read(PFM_MODE); if (ret != -1) { val = (uchar)ret; @@ -184,7 +172,7 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate, int sm0, sm1; int bad; - assert(inited); + assert(tps6586x_dev); /* get current voltage settings */ if (read_voltages(&sm0, &sm1)) { @@ -255,10 +243,9 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate, return bad ? -1 : 0; } -int tps6586x_init(int bus) +int tps6586x_init(struct udevice *dev) { - bus_num = bus; - inited = 1; + tps6586x_dev = dev; return 0; } diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index e578ae6342..7f1fdd1534 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -91,17 +91,23 @@ void twl4030_power_init(void) TWL4030_PM_RECEIVER_DEV_GRP_P1); } -void twl4030_power_mmc_init(void) +void twl4030_power_mmc_init(int dev_index) { - /* Set VMMC1 to 3.15 Volts */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, - TWL4030_PM_RECEIVER_VMMC1_VSEL_32, - TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); + if (dev_index == 0) { + /* Set VMMC1 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, + TWL4030_PM_RECEIVER_VMMC1_VSEL_32, + TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); - /* Set VMMC2 to 3.15 Volts */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, - TWL4030_PM_RECEIVER_VMMC2_VSEL_32, - TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, - TWL4030_PM_RECEIVER_DEV_GRP_P1); + mdelay(100); /* ramp-up delay from Linux code */ + } else if (dev_index == 1) { + /* Set VMMC2 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + mdelay(100); /* ramp-up delay from Linux code */ + } } |