diff options
Diffstat (limited to 'drivers/ram/stm32mp1/stm32mp1_tuning.c')
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_tuning.c | 223 |
1 files changed, 189 insertions, 34 deletions
diff --git a/drivers/ram/stm32mp1/stm32mp1_tuning.c b/drivers/ram/stm32mp1/stm32mp1_tuning.c index 4e1c1fab54..3013b7b667 100644 --- a/drivers/ram/stm32mp1/stm32mp1_tuning.c +++ b/drivers/ram/stm32mp1/stm32mp1_tuning.c @@ -8,6 +8,8 @@ #include <ram.h> #include <reset.h> #include <asm/io.h> +#include <linux/bitops.h> +#include <linux/iopoll.h> #include "stm32mp1_ddr_regs.h" #include "stm32mp1_ddr.h" @@ -75,6 +77,133 @@ static u8 get_nb_bytes(struct stm32mp1_ddrctl *ctl) return nb_bytes; } +static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) +{ + /* Count bank address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap1); + /* addrmap1.addrmap_bank_b1 */ + val = (reg & GENMASK(5, 0)) >> 0; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b2 */ + val = (reg & GENMASK(13, 8)) >> 8; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b3 */ + val = (reg & GENMASK(21, 16)) >> 16; + if (val <= 31) + bits++; + + return bits; +} + +static u8 get_nb_col(struct stm32mp1_ddrctl *ctl) +{ + u8 bits; + u32 reg, val; + + /* Count column address bits, start at 2 for b0 and b1 (fixed) */ + bits = 2; + + reg = readl(&ctl->addrmap2); + /* addrmap2.addrmap_col_b2 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b3 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b4 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b5 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap3); + /* addrmap3.addrmap_col_b6 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b7 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b8 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b9 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap4); + /* addrmap4.addrmap_col_b10 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap4.addrmap_col_b11 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + + return bits; +} + +static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) +{ + /* Count row address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap5); + /* addrmap5.addrmap_row_b0 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b1 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b2_10 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 11) + bits += 9; + else + printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); + /* addrmap5.addrmap_row_b11 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 11) + bits++; + + reg = readl(&ctl->addrmap6); + /* addrmap6.addrmap_row_b12 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b13 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b14 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b15 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + return bits; +} + static void itm_soft_reset(struct stm32mp1_ddrphy *phy) { stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST); @@ -169,8 +298,13 @@ static void set_r0dgps_delay(struct stm32mp1_ddrphy *phy, } /* Basic BIST configuration for data lane tests. */ -static void config_BIST(struct stm32mp1_ddrphy *phy) +static void config_BIST(struct stm32mp1_ddrctl *ctl, + struct stm32mp1_ddrphy *phy) { + u8 nb_bank = get_nb_bank(ctl); + u8 nb_row = get_nb_row(ctl); + u8 nb_col = get_nb_col(ctl); + /* Selects the SDRAM bank address to be used during BIST. */ u32 bbank = 0; /* Selects the SDRAM row address to be used during BIST. */ @@ -190,18 +324,20 @@ static void config_BIST(struct stm32mp1_ddrphy *phy) * must be 0 with single rank */ u32 brank = 0; + /* Specifies the maximum SDRAM bank address to be used during * BIST before the address & increments to the next rank. */ - u32 bmbank = 1; + u32 bmbank = (1 << nb_bank) - 1; /* Specifies the maximum SDRAM row address to be used during * BIST before the address & increments to the next bank. */ - u32 bmrow = 0x7FFF; /* To check */ + u32 bmrow = (1 << nb_row) - 1; /* Specifies the maximum SDRAM column address to be used during * BIST before the address & increments to the next row. */ - u32 bmcol = 0x3FF; /* To check */ + u32 bmcol = (1 << nb_col) - 1; + u32 bmode_conf = 0x00000001; /* DRam mode */ u32 bdxen_conf = 0x00000001; /* BIST on Data byte */ u32 bdpat_conf = 0x00000002; /* Select LFSR pattern */ @@ -223,8 +359,6 @@ static void config_BIST(struct stm32mp1_ddrphy *phy) writel(bcol | (brow << 12) | (bbank << 28), &phy->bistar0); writel(brank | (bmrank << 2) | (bainc << 4), &phy->bistar1); - - /* To check this line : */ writel(bmcol | (bmrow << 12) | (bmbank << 28), &phy->bistar2); } @@ -246,6 +380,8 @@ static void BIST_test(struct stm32mp1_ddrphy *phy, u8 byte, bool result = true; /* BIST_SUCCESS */ u32 cnt = 0; u32 error = 0; + u32 val; + int ret; bist->test_result = true; @@ -266,7 +402,7 @@ run: writel(rand(), &phy->bistlsr); /* some delay to reset BIST */ - mdelay(1); + udelay(10); /*Perform BIST Run*/ clrsetbits_le32(&phy->bistrr, @@ -274,27 +410,29 @@ run: 0x00000001); /* Write BISTRR.BINST = 3?b001; */ - /* Wait for a number of CTL clocks before reading BIST register*/ - /* Wait 300 ctl_clk cycles; ... IS it really needed?? */ - /* Perform BIST Instruction Stop*/ - /* Write BISTRR.BINST = 3?b010;*/ - - /* poll on BISTGSR.BDONE. If 0, wait. ++TODO Add timeout */ - while (!(readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDDONE)) - ; - - /*Check if received correct number of words*/ - /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */ - if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) == - readl(&phy->bistwcr)) { - /*Determine if there is a data comparison error*/ - /* if (Read BISTGSR.BDXERR = 1?b0) */ - if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR) - result = false; /* BIST_FAIL; */ - else - result = true; /* BIST_SUCCESS; */ - } else { + /* poll on BISTGSR.BDONE and wait max 1000 us */ + ret = readl_poll_timeout(&phy->bistgsr, val, + val & DDRPHYC_BISTGSR_BDDONE, 1000); + + if (ret < 0) { + printf("warning: BIST timeout\n"); result = false; /* BIST_FAIL; */ + /*Perform BIST Stop */ + clrsetbits_le32(&phy->bistrr, 0x00000007, 0x00000002); + } else { + /*Check if received correct number of words*/ + /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */ + if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) + == readl(&phy->bistwcr)) { + /*Determine if there is a data comparison error*/ + /* if (Read BISTGSR.BDXERR = 1?b0) */ + if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR) + result = false; /* BIST_FAIL; */ + else + result = true; /* BIST_SUCCESS; */ + } else { + result = false; /* BIST_FAIL; */ + } } /* loop while success */ @@ -394,7 +532,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); /* Config the BIST block */ - config_BIST(phy); + config_BIST(ctl, phy); pr_debug("BIST Config done.\n"); /* Train each byte */ @@ -807,7 +945,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); /* Config the BIST block */ - config_BIST(phy); + config_BIST(ctl, phy); for (byte = 0; byte < nb_bytes; byte++) { if (ctrlc()) { @@ -1182,15 +1320,17 @@ static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, dqs_gate_values[byte][0], dqs_gate_values[byte][1]); pr_debug("*******the nominal values were system latency: 0 phase: 2*******\n"); - set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]); - set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]); } } else { /* if intermitant, restore defaut values */ pr_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n"); - set_r0dgsl_delay(phy, byte, 0); - set_r0dgps_delay(phy, byte, 2); + dqs_gate_values[byte][0] = 0; + dqs_gate_values[byte][1] = 2; } + set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]); + set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]); + printf("Byte %d, R0DGSL = %d, R0DGPS = %d\n", + byte, dqs_gate_values[byte][0], dqs_gate_values[byte][1]); /* return 0 if intermittent or if both left_bound * and right_bound are not found @@ -1227,7 +1367,7 @@ static enum test_result read_dqs_gating(struct stm32mp1_ddrctl *ctl, clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); /* config the bist block */ - config_BIST(phy); + config_BIST(ctl, phy); for (byte = 0; byte < nb_bytes; byte++) { if (ctrlc()) { @@ -1281,11 +1421,16 @@ static enum test_result do_read_dqs_gating(struct stm32mp1_ddrctl *ctl, { u32 rfshctl3 = readl(&ctl->rfshctl3); u32 pwrctl = readl(&ctl->pwrctl); + u32 derateen = readl(&ctl->derateen); enum test_result res; + writel(0x0, &ctl->derateen); stm32mp1_refresh_disable(ctl); + res = read_dqs_gating(ctl, phy, string); + stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); + writel(derateen, &ctl->derateen); return res; } @@ -1296,11 +1441,16 @@ static enum test_result do_bit_deskew(struct stm32mp1_ddrctl *ctl, { u32 rfshctl3 = readl(&ctl->rfshctl3); u32 pwrctl = readl(&ctl->pwrctl); + u32 derateen = readl(&ctl->derateen); enum test_result res; + writel(0x0, &ctl->derateen); stm32mp1_refresh_disable(ctl); + res = bit_deskew(ctl, phy, string); + stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); + writel(derateen, &ctl->derateen); return res; } @@ -1311,11 +1461,16 @@ static enum test_result do_eye_training(struct stm32mp1_ddrctl *ctl, { u32 rfshctl3 = readl(&ctl->rfshctl3); u32 pwrctl = readl(&ctl->pwrctl); + u32 derateen = readl(&ctl->derateen); enum test_result res; + writel(0x0, &ctl->derateen); stm32mp1_refresh_disable(ctl); + res = eye_training(ctl, phy, string); + stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); + writel(derateen, &ctl->derateen); return res; } |