diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Makefile | 3 | ||||
| -rw-r--r-- | drivers/serial/atmel_usart.c | 116 | ||||
| -rw-r--r-- | drivers/serial/ns16550.c | 40 | ||||
| -rw-r--r-- | drivers/serial/serial-uclass.c | 112 | ||||
| -rw-r--r-- | drivers/serial/serial.c | 140 | ||||
| -rw-r--r-- | drivers/serial/serial_dw.c (renamed from drivers/serial/serial_coreboot.c) | 15 | ||||
| -rw-r--r-- | drivers/serial/serial_pl01x.c | 49 | ||||
| -rw-r--r-- | drivers/serial/serial_sh.h | 12 | ||||
| -rw-r--r-- | drivers/serial/serial_tegra.c | 16 | ||||
| -rw-r--r-- | drivers/serial/serial_uniphier.c | 51 | ||||
| -rw-r--r-- | drivers/serial/serial_x86.c | 44 | ||||
| -rw-r--r-- | drivers/serial/usbtty.c | 2 |
12 files changed, 438 insertions, 162 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2c19ebc288..4cc00cd2f8 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o +obj-$(CONFIG_DW_SERIAL) += serial_dw.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o @@ -42,7 +43,7 @@ obj-$(CONFIG_ARC_SERIAL) += serial_arc.o obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o -obj-$(CONFIG_COREBOOT_SERIAL) += serial_coreboot.o +obj-$(CONFIG_X86_SERIAL) += serial_x86.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 8f0e3489a0..4fe992bf2b 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -7,11 +7,16 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <dm.h> +#include <errno.h> #include <watchdog.h> #include <serial.h> #include <linux/compiler.h> #include <asm/io.h> +#ifdef CONFIG_DM_SERIAL +#include <asm/arch/atmel_serial.h> +#endif #include <asm/arch/clk.h> #include <asm/arch/hardware.h> @@ -19,9 +24,9 @@ DECLARE_GLOBAL_DATA_PTR; -static void atmel_serial_setbrg(void) +static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id, + int baudrate) { - atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; unsigned long divisor; unsigned long usart_hz; @@ -30,15 +35,13 @@ static void atmel_serial_setbrg(void) * Baud Rate = -------------- * 16 * CD */ - usart_hz = get_usart_clk_rate(CONFIG_USART_ID); - divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate; + usart_hz = get_usart_clk_rate(id); + divisor = (usart_hz / 16 + baudrate / 2) / baudrate; writel(USART3_BF(CD, divisor), &usart->brgr); } -static int atmel_serial_init(void) +static void atmel_serial_init_internal(atmel_usart3_t *usart) { - atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; - /* * Just in case: drain transmitter register * 1000us is enough for baudrate >= 9600 @@ -47,9 +50,10 @@ static int atmel_serial_init(void) __udelay(1000); writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); +} - serial_setbrg(); - +static void atmel_serial_activate(atmel_usart3_t *usart) +{ writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) | USART3_BF(USCLKS, USART3_USCLKS_MCK) | USART3_BF(CHRL, USART3_CHRL_8) @@ -59,6 +63,22 @@ static int atmel_serial_init(void) writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); /* 100us is enough for the new settings to be settled */ __udelay(100); +} + +#ifndef CONFIG_DM_SERIAL +static void atmel_serial_setbrg(void) +{ + atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE, + CONFIG_USART_ID, gd->baudrate); +} + +static int atmel_serial_init(void) +{ + atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; + + atmel_serial_init_internal(usart); + serial_setbrg(); + atmel_serial_activate(usart); return 0; } @@ -109,3 +129,81 @@ __weak struct serial_device *default_serial_console(void) { return &atmel_serial_drv; } +#endif + +#ifdef CONFIG_DM_SERIAL + +struct atmel_serial_priv { + atmel_usart3_t *usart; +}; + +int atmel_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct atmel_serial_priv *priv = dev_get_priv(dev); + + atmel_serial_setbrg_internal(priv->usart, 0 /* ignored */, baudrate); + atmel_serial_activate(priv->usart); + + return 0; +} + +static int atmel_serial_getc(struct udevice *dev) +{ + struct atmel_serial_priv *priv = dev_get_priv(dev); + + if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY))) + return -EAGAIN; + + return readl(&priv->usart->rhr); +} + +static int atmel_serial_putc(struct udevice *dev, const char ch) +{ + struct atmel_serial_priv *priv = dev_get_priv(dev); + + if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY))) + return -EAGAIN; + + writel(ch, &priv->usart->thr); + + return 0; +} + +static int atmel_serial_pending(struct udevice *dev, bool input) +{ + struct atmel_serial_priv *priv = dev_get_priv(dev); + uint32_t csr = readl(&priv->usart->csr); + + if (input) + return csr & USART3_BIT(RXRDY) ? 1 : 0; + else + return csr & USART3_BIT(TXEMPTY) ? 0 : 1; +} + +static const struct dm_serial_ops atmel_serial_ops = { + .putc = atmel_serial_putc, + .pending = atmel_serial_pending, + .getc = atmel_serial_getc, + .setbrg = atmel_serial_setbrg, +}; + +static int atmel_serial_probe(struct udevice *dev) +{ + struct atmel_serial_platdata *plat = dev->platdata; + struct atmel_serial_priv *priv = dev_get_priv(dev); + + priv->usart = (atmel_usart3_t *)plat->base_addr; + atmel_serial_init_internal(priv->usart); + + return 0; +} + +U_BOOT_DRIVER(serial_atmel) = { + .name = "serial_atmel", + .id = UCLASS_SERIAL, + .probe = atmel_serial_probe, + .ops = &atmel_serial_ops, + .flags = DM_FLAG_PRE_RELOC, + .priv_auto_alloc_size = sizeof(struct atmel_serial_priv), +}; +#endif diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 8f051914f5..70c946249f 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -132,11 +132,12 @@ static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) void NS16550_init(NS16550_t com_port, int baud_divisor) { -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) +#if (defined(CONFIG_SPL_BUILD) && \ + (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) /* - * On some OMAP3 devices when UART3 is configured for boot mode before - * SPL starts only THRE bit is set. We have to empty the transmitter - * before initialization starts. + * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode + * before SPL starts only THRE bit is set. We have to empty the + * transmitter before initialization starts. */ if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) == UART_LSR_THRE) { @@ -288,7 +289,38 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) struct ns16550_platdata *plat = dev->platdata; fdt_addr_t addr; + /* try Processor Local Bus device first */ addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); +#ifdef CONFIG_PCI + if (addr == FDT_ADDR_T_NONE) { + /* then try pci device */ + struct fdt_pci_addr pci_addr; + u32 bar; + int ret; + + /* we prefer to use a memory-mapped register */ + ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset, + FDT_PCI_SPACE_MEM32, "reg", + &pci_addr); + if (ret) { + /* try if there is any i/o-mapped register */ + ret = fdtdec_get_pci_addr(gd->fdt_blob, + dev->of_offset, + FDT_PCI_SPACE_IO, + "reg", &pci_addr); + if (ret) + return ret; + } + + ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset, + &pci_addr, &bar); + if (ret) + return ret; + + addr = bar; + } +#endif + if (addr == FDT_ADDR_T_NONE) return -EINVAL; diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 71f1a5cb91..d1b5777cec 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> +#include <environment.h> #include <errno.h> #include <fdtdec.h> #include <os.h> @@ -19,8 +20,10 @@ DECLARE_GLOBAL_DATA_PTR; -/* The currently-selected console serial device */ -struct udevice *cur_dev __attribute__ ((section(".data"))); +/* + * Table with supported baudrates (defined in config_xyz.h) + */ +static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; #ifndef CONFIG_SYS_MALLOC_F_LEN #error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work" @@ -28,25 +31,30 @@ struct udevice *cur_dev __attribute__ ((section(".data"))); static void serial_find_console_or_panic(void) { + struct udevice *dev; + #ifdef CONFIG_OF_CONTROL int node; /* Check for a chosen console */ node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path"); if (node < 0) - node = fdtdec_get_alias_node(gd->fdt_blob, "console"); - if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &cur_dev)) + node = fdt_path_offset(gd->fdt_blob, "console"); + if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &dev)) { + gd->cur_serial_dev = dev; return; + } /* * If the console is not marked to be bound before relocation, bind * it anyway. */ if (node > 0 && - !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &cur_dev)) { - if (!device_probe(cur_dev)) + !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &dev)) { + if (!device_probe(dev)) { + gd->cur_serial_dev = dev; return; - cur_dev = NULL; + } } #endif /* @@ -61,11 +69,12 @@ static void serial_find_console_or_panic(void) #else #define INDEX 0 #endif - if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &cur_dev) && - uclass_get_device(UCLASS_SERIAL, INDEX, &cur_dev) && - (uclass_first_device(UCLASS_SERIAL, &cur_dev) || !cur_dev)) + if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) && + uclass_get_device(UCLASS_SERIAL, INDEX, &dev) && + (uclass_first_device(UCLASS_SERIAL, &dev) || !dev)) panic("No serial driver found"); #undef INDEX + gd->cur_serial_dev = dev; } /* Called prior to relocation */ @@ -127,40 +136,42 @@ static int _serial_tstc(struct udevice *dev) void serial_putc(char ch) { - _serial_putc(cur_dev, ch); + _serial_putc(gd->cur_serial_dev, ch); } void serial_puts(const char *str) { - _serial_puts(cur_dev, str); + _serial_puts(gd->cur_serial_dev, str); } int serial_getc(void) { - return _serial_getc(cur_dev); + return _serial_getc(gd->cur_serial_dev); } int serial_tstc(void) { - return _serial_tstc(cur_dev); + return _serial_tstc(gd->cur_serial_dev); } void serial_setbrg(void) { - struct dm_serial_ops *ops = serial_get_ops(cur_dev); + struct dm_serial_ops *ops = serial_get_ops(gd->cur_serial_dev); if (ops->setbrg) - ops->setbrg(cur_dev, gd->baudrate); + ops->setbrg(gd->cur_serial_dev, gd->baudrate); } void serial_stdio_init(void) { } +#ifdef CONFIG_DM_STDIO static void serial_stub_putc(struct stdio_dev *sdev, const char ch) { _serial_putc(sdev->priv, ch); } +#endif void serial_stub_puts(struct stdio_dev *sdev, const char *str) { @@ -177,11 +188,74 @@ int serial_stub_tstc(struct stdio_dev *sdev) return _serial_tstc(sdev->priv); } +/** + * on_baudrate() - Update the actual baudrate when the env var changes + * + * This will check for a valid baudrate and only apply it if valid. + */ +static int on_baudrate(const char *name, const char *value, enum env_op op, + int flags) +{ + int i; + int baudrate; + + switch (op) { + case env_op_create: + case env_op_overwrite: + /* + * Switch to new baudrate if new baudrate is supported + */ + baudrate = simple_strtoul(value, NULL, 10); + + /* Not actually changing */ + if (gd->baudrate == baudrate) + return 0; + + for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) { + if (baudrate == baudrate_table[i]) + break; + } + if (i == ARRAY_SIZE(baudrate_table)) { + if ((flags & H_FORCE) == 0) + printf("## Baudrate %d bps not supported\n", + baudrate); + return 1; + } + if ((flags & H_INTERACTIVE) != 0) { + printf("## Switch baudrate to %d bps and press ENTER ...\n", + baudrate); + udelay(50000); + } + + gd->baudrate = baudrate; + + serial_setbrg(); + + udelay(50000); + + if ((flags & H_INTERACTIVE) != 0) + while (1) { + if (getc() == '\r') + break; + } + + return 0; + case env_op_delete: + printf("## Baudrate may not be deleted\n"); + return 1; + default: + return 0; + } +} +U_BOOT_ENV_CALLBACK(baudrate, on_baudrate); + static int serial_post_probe(struct udevice *dev) { - struct stdio_dev sdev; struct dm_serial_ops *ops = serial_get_ops(dev); +#ifdef CONFIG_DM_STDIO struct serial_dev_priv *upriv = dev->uclass_priv; + struct stdio_dev sdev; +#endif int ret; /* Set the baud rate */ @@ -191,9 +265,9 @@ static int serial_post_probe(struct udevice *dev) return ret; } +#ifdef CONFIG_DM_STDIO if (!(gd->flags & GD_FLG_RELOC)) return 0; - memset(&sdev, '\0', sizeof(sdev)); strncpy(sdev.name, dev->name, sizeof(sdev.name)); @@ -204,7 +278,7 @@ static int serial_post_probe(struct udevice *dev) sdev.getc = serial_stub_getc; sdev.tstc = serial_stub_tstc; stdio_register_dev(&sdev, &upriv->sdev); - +#endif return 0; } diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 18e41b2302..95c992a5a3 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -109,54 +109,54 @@ U_BOOT_ENV_CALLBACK(baudrate, on_baudrate); void name(void) \ __attribute__((weak, alias("serial_null"))); -serial_initfunc(mpc8xx_serial_initialize); -serial_initfunc(ns16550_serial_initialize); -serial_initfunc(pxa_serial_initialize); -serial_initfunc(s3c24xx_serial_initialize); -serial_initfunc(s5p_serial_initialize); -serial_initfunc(zynq_serial_initialize); -serial_initfunc(bfin_serial_initialize); -serial_initfunc(bfin_jtag_initialize); -serial_initfunc(mpc512x_serial_initialize); -serial_initfunc(uartlite_serial_initialize); -serial_initfunc(au1x00_serial_initialize); -serial_initfunc(asc_serial_initialize); -serial_initfunc(jz_serial_initialize); -serial_initfunc(mpc5xx_serial_initialize); -serial_initfunc(mpc8260_scc_serial_initialize); -serial_initfunc(mpc8260_smc_serial_initialize); -serial_initfunc(mpc85xx_serial_initialize); -serial_initfunc(iop480_serial_initialize); -serial_initfunc(leon2_serial_initialize); -serial_initfunc(leon3_serial_initialize); -serial_initfunc(marvell_serial_initialize); +serial_initfunc(altera_jtag_serial_initialize); +serial_initfunc(altera_serial_initialize); serial_initfunc(amirix_serial_initialize); +serial_initfunc(arc_serial_initialize); +serial_initfunc(arm_dcc_initialize); +serial_initfunc(asc_serial_initialize); +serial_initfunc(atmel_serial_initialize); +serial_initfunc(au1x00_serial_initialize); +serial_initfunc(bfin_jtag_initialize); +serial_initfunc(bfin_serial_initialize); serial_initfunc(bmw_serial_initialize); +serial_initfunc(clps7111_serial_initialize); serial_initfunc(cogent_serial_initialize); serial_initfunc(cpci750_serial_initialize); serial_initfunc(evb64260_serial_initialize); -serial_initfunc(ml2_serial_initialize); -serial_initfunc(sconsole_serial_initialize); -serial_initfunc(p3mx_serial_initialize); -serial_initfunc(altera_jtag_serial_initialize); -serial_initfunc(altera_serial_initialize); -serial_initfunc(atmel_serial_initialize); -serial_initfunc(lpc32xx_serial_initialize); -serial_initfunc(mcf_serial_initialize); -serial_initfunc(oc_serial_initialize); -serial_initfunc(sandbox_serial_initialize); -serial_initfunc(clps7111_serial_initialize); serial_initfunc(imx_serial_initialize); +serial_initfunc(iop480_serial_initialize); +serial_initfunc(jz_serial_initialize); serial_initfunc(ks8695_serial_initialize); +serial_initfunc(leon2_serial_initialize); +serial_initfunc(leon3_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); +serial_initfunc(lpc32xx_serial_initialize); +serial_initfunc(marvell_serial_initialize); serial_initfunc(max3100_serial_initialize); +serial_initfunc(mcf_serial_initialize); +serial_initfunc(ml2_serial_initialize); +serial_initfunc(mpc512x_serial_initialize); +serial_initfunc(mpc5xx_serial_initialize); +serial_initfunc(mpc8260_scc_serial_initialize); +serial_initfunc(mpc8260_smc_serial_initialize); +serial_initfunc(mpc85xx_serial_initialize); +serial_initfunc(mpc8xx_serial_initialize); serial_initfunc(mxc_serial_initialize); +serial_initfunc(mxs_auart_initialize); +serial_initfunc(ns16550_serial_initialize); +serial_initfunc(oc_serial_initialize); +serial_initfunc(p3mx_serial_initialize); serial_initfunc(pl01x_serial_initialize); +serial_initfunc(pxa_serial_initialize); +serial_initfunc(s3c24xx_serial_initialize); +serial_initfunc(s5p_serial_initialize); serial_initfunc(sa1100_serial_initialize); +serial_initfunc(sandbox_serial_initialize); +serial_initfunc(sconsole_serial_initialize); serial_initfunc(sh_serial_initialize); -serial_initfunc(arm_dcc_initialize); -serial_initfunc(mxs_auart_initialize); -serial_initfunc(arc_serial_initialize); +serial_initfunc(uartlite_serial_initialize); +serial_initfunc(zynq_serial_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -202,54 +202,54 @@ void serial_register(struct serial_device *dev) */ void serial_initialize(void) { - mpc8xx_serial_initialize(); - ns16550_serial_initialize(); - pxa_serial_initialize(); - s3c24xx_serial_initialize(); - s5p_serial_initialize(); - mpc512x_serial_initialize(); - bfin_serial_initialize(); - bfin_jtag_initialize(); - uartlite_serial_initialize(); - zynq_serial_initialize(); - au1x00_serial_initialize(); - asc_serial_initialize(); - jz_serial_initialize(); - mpc5xx_serial_initialize(); - mpc8260_scc_serial_initialize(); - mpc8260_smc_serial_initialize(); - mpc85xx_serial_initialize(); - iop480_serial_initialize(); - leon2_serial_initialize(); - leon3_serial_initialize(); - marvell_serial_initialize(); + altera_jtag_serial_initialize(); + altera_serial_initialize(); amirix_serial_initialize(); + arc_serial_initialize(); + arm_dcc_initialize(); + asc_serial_initialize(); + atmel_serial_initialize(); + au1x00_serial_initialize(); + bfin_jtag_initialize(); + bfin_serial_initialize(); bmw_serial_initialize(); + clps7111_serial_initialize(); cogent_serial_initialize(); cpci750_serial_initialize(); evb64260_serial_initialize(); - ml2_serial_initialize(); - sconsole_serial_initialize(); - p3mx_serial_initialize(); - altera_jtag_serial_initialize(); - altera_serial_initialize(); - atmel_serial_initialize(); - lpc32xx_serial_initialize(); - mcf_serial_initialize(); - oc_serial_initialize(); - sandbox_serial_initialize(); - clps7111_serial_initialize(); imx_serial_initialize(); + iop480_serial_initialize(); + jz_serial_initialize(); ks8695_serial_initialize(); + leon2_serial_initialize(); + leon3_serial_initialize(); lh7a40x_serial_initialize(); + lpc32xx_serial_initialize(); + marvell_serial_initialize(); max3100_serial_initialize(); + mcf_serial_initialize(); + ml2_serial_initialize(); + mpc512x_serial_initialize(); + mpc5xx_serial_initialize(); + mpc8260_scc_serial_initialize(); + mpc8260_smc_serial_initialize(); + mpc85xx_serial_initialize(); + mpc8xx_serial_initialize(); mxc_serial_initialize(); + mxs_auart_initialize(); + ns16550_serial_initialize(); + oc_serial_initialize(); + p3mx_serial_initialize(); pl01x_serial_initialize(); + pxa_serial_initialize(); + s3c24xx_serial_initialize(); + s5p_serial_initialize(); sa1100_serial_initialize(); + sandbox_serial_initialize(); + sconsole_serial_initialize(); sh_serial_initialize(); - arm_dcc_initialize(); - mxs_auart_initialize(); - arc_serial_initialize(); + uartlite_serial_initialize(); + zynq_serial_initialize(); serial_assign(default_serial_console()->name); } diff --git a/drivers/serial/serial_coreboot.c b/drivers/serial/serial_dw.c index 5c6a76c59c..a348f2956a 100644 --- a/drivers/serial/serial_coreboot.c +++ b/drivers/serial/serial_dw.c @@ -9,12 +9,12 @@ #include <ns16550.h> #include <serial.h> -static const struct udevice_id coreboot_serial_ids[] = { - { .compatible = "coreboot-uart" }, +static const struct udevice_id dw_serial_ids[] = { + { .compatible = "snps,dw-apb-uart" }, { } }; -static int coreboot_serial_ofdata_to_platdata(struct udevice *dev) +static int dw_serial_ofdata_to_platdata(struct udevice *dev) { struct ns16550_platdata *plat = dev_get_platdata(dev); int ret; @@ -22,15 +22,16 @@ static int coreboot_serial_ofdata_to_platdata(struct udevice *dev) ret = ns16550_serial_ofdata_to_platdata(dev); if (ret) return ret; - plat->clock = 1843200; + plat->clock = CONFIG_SYS_NS16550_CLK; return 0; } + U_BOOT_DRIVER(serial_ns16550) = { - .name = "serial_coreboot", + .name = "serial_dw", .id = UCLASS_SERIAL, - .of_match = coreboot_serial_ids, - .ofdata_to_platdata = coreboot_serial_ofdata_to_platdata, + .of_match = dw_serial_ids, + .ofdata_to_platdata = dw_serial_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), .priv_auto_alloc_size = sizeof(struct NS16550), .probe = ns16550_serial_probe, diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 38dda91021..75eb6bd729 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -72,30 +72,39 @@ static int pl01x_tstc(struct pl01x_regs *regs) static int pl01x_generic_serial_init(struct pl01x_regs *regs, enum pl01x_type type) { - unsigned int lcr; - + switch (type) { + case TYPE_PL010: + /* disable everything */ + writel(0, ®s->pl010_cr); + break; + case TYPE_PL011: #ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT - if (type == TYPE_PL011) { /* Empty RX fifo if necessary */ if (readl(®s->pl011_cr) & UART_PL011_CR_UARTEN) { while (!(readl(®s->fr) & UART_PL01x_FR_RXFE)) readl(®s->dr); } - } #endif + /* disable everything */ + writel(0, ®s->pl011_cr); + break; + default: + return -EINVAL; + } - /* First, disable everything */ - writel(0, ®s->pl010_cr); + return 0; +} - /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */ +static int set_line_control(struct pl01x_regs *regs) +{ + unsigned int lcr; + /* + * Internal update of baud rate register require line + * control register write + */ lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN; - writel(lcr, ®s->pl011_lcrh); - - switch (type) { - case TYPE_PL010: - break; - case TYPE_PL011: { #ifdef CONFIG_PL011_SERIAL_RLCR + { int i; /* @@ -107,15 +116,9 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs, writel(lcr, ®s->fr); writel(lcr, ®s->pl011_rlcr); - /* lcrh needs to be set again for change to be effective */ - writel(lcr, ®s->pl011_lcrh); -#endif - break; - } - default: - return -EINVAL; } - +#endif + writel(lcr, ®s->pl011_lcrh); return 0; } @@ -175,6 +178,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, writel(divider, ®s->pl011_ibrd); writel(fraction, ®s->pl011_fbrd); + set_line_control(regs); /* Finally, enable the UART */ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE | UART_PL011_CR_RTS, ®s->pl011_cr); @@ -201,7 +205,7 @@ static void pl01x_serial_init_baud(int baudrate) base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX]; pl01x_generic_serial_init(base_regs, pl01x_type); - pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate); + pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate); } /* @@ -344,6 +348,7 @@ U_BOOT_DRIVER(serial_pl01x) = { .probe = pl01x_serial_probe, .ops = &pl01x_serial_ops, .flags = DM_FLAG_PRE_RELOC, + .priv_auto_alloc_size = sizeof(struct pl01x_priv), }; #endif diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index fe8cde4ded..ef88c8f273 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -227,7 +227,7 @@ struct uart_port { # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ORER 0x0001 # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ #else @@ -304,7 +304,8 @@ struct uart_port { /* SH7763 SCIF2 support */ # define SCIF2_RFDC_MASK 0x001f # define SCIF2_TXROOM_MAX 16 -#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) # define SCIF_RFDC_MASK 0x003f #else @@ -432,7 +433,7 @@ static inline void sci_##name##_out(struct uart_port *port,\ SCI_OUT(sci_size, sci_offset, value);\ } -#if defined(CONFIG_SH3) || \ +#if defined(CONFIG_CPU_SH3) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) || \ @@ -589,7 +590,7 @@ SCIF_FNS(SCSPTR, 0, 0, 0, 0) SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) #endif #if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) SCIF_FNS(DL, 0, 0, 0x30, 16) SCIF_FNS(CKS, 0, 0, 0x34, 16) #endif @@ -734,7 +735,8 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk) #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) /* Internal Clock */ #else /* Generic SH */ diff --git a/drivers/serial/serial_tegra.c b/drivers/serial/serial_tegra.c index 7eb70e1de1..b9227f0563 100644 --- a/drivers/serial/serial_tegra.c +++ b/drivers/serial/serial_tegra.c @@ -9,6 +9,7 @@ #include <ns16550.h> #include <serial.h> +#ifdef CONFIG_OF_CONTROL static const struct udevice_id tegra_serial_ids[] = { { .compatible = "nvidia,tegra20-uart" }, { } @@ -26,13 +27,28 @@ static int tegra_serial_ofdata_to_platdata(struct udevice *dev) return 0; } +#else +struct ns16550_platdata tegra_serial = { + .base = CONFIG_SYS_NS16550_COM1, + .reg_shift = 2, + .clock = V_NS16550_CLK, +}; + +U_BOOT_DEVICE(ns16550_serial) = { + "serial_tegra20", &tegra_serial +}; +#endif + U_BOOT_DRIVER(serial_ns16550) = { .name = "serial_tegra20", .id = UCLASS_SERIAL, +#ifdef CONFIG_OF_CONTROL .of_match = tegra_serial_ids, .ofdata_to_platdata = tegra_serial_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), +#endif .priv_auto_alloc_size = sizeof(struct NS16550), .probe = ns16550_serial_probe, .ops = &ns16550_serial_ops, + .flags = DM_FLAG_PRE_RELOC, }; diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index 9114b3ed60..e8a1608b99 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -5,12 +5,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/serial_reg.h> #include <asm/io.h> #include <asm/errno.h> #include <dm/device.h> #include <dm/platform_data/serial-uniphier.h> #include <serial.h> +#include <fdtdec.h> #define UART_REG(x) \ u8 x; \ @@ -37,17 +38,6 @@ struct uniphier_serial { #define thr rbr -/* - * These are the definitions for the Line Control Register - */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ - struct uniphier_serial_private_data { struct uniphier_serial __iomem *membase; }; @@ -55,14 +45,14 @@ struct uniphier_serial_private_data { #define uniphier_serial_port(dev) \ ((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase -int uniphier_serial_setbrg(struct udevice *dev, int baudrate) +static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) { struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); struct uniphier_serial __iomem *port = uniphier_serial_port(dev); const unsigned int mode_x_div = 16; unsigned int divisor; - writeb(UART_LCR_WLS_8, &port->lcr); + writeb(UART_LCR_WLEN8, &port->lcr); divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); @@ -93,7 +83,17 @@ static int uniphier_serial_putc(struct udevice *dev, const char c) return 0; } -int uniphier_serial_probe(struct udevice *dev) +static int uniphier_serial_pending(struct udevice *dev, bool input) +{ + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); + + if (input) + return readb(&port->lsr) & UART_LSR_DR; + else + return !(readb(&port->lsr) & UART_LSR_THRE); +} + +static int uniphier_serial_probe(struct udevice *dev) { struct uniphier_serial_private_data *priv = dev_get_priv(dev); struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); @@ -106,7 +106,7 @@ int uniphier_serial_probe(struct udevice *dev) return 0; } -int uniphier_serial_remove(struct udevice *dev) +static int uniphier_serial_remove(struct udevice *dev) { unmap_sysmem(uniphier_serial_port(dev)); @@ -114,19 +114,21 @@ int uniphier_serial_remove(struct udevice *dev) } #ifdef CONFIG_OF_CONTROL -static const struct udevice_id uniphier_uart_of_match = { - { .compatible = "panasonic,uniphier-uart"}, +static const struct udevice_id uniphier_uart_of_match[] = { + { .compatible = "panasonic,uniphier-uart" }, {}, }; static int uniphier_serial_ofdata_to_platdata(struct udevice *dev) { - /* - * TODO: Masahiro Yamada (yamada.m@jp.panasonic.com) - * - * Implement conversion code from DTB to platform data - * when supporting CONFIG_OF_CONTROL on UniPhir platform. - */ + struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); + DECLARE_GLOBAL_DATA_PTR; + + plat->base = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + plat->uartclk = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "clock-frequency", 0); + + return 0; } #endif @@ -134,6 +136,7 @@ static const struct dm_serial_ops uniphier_serial_ops = { .setbrg = uniphier_serial_setbrg, .getc = uniphier_serial_getc, .putc = uniphier_serial_putc, + .pending = uniphier_serial_pending, }; U_BOOT_DRIVER(uniphier_serial) = { diff --git a/drivers/serial/serial_x86.c b/drivers/serial/serial_x86.c new file mode 100644 index 0000000000..4bf6062c64 --- /dev/null +++ b/drivers/serial/serial_x86.c @@ -0,0 +1,44 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <fdtdec.h> +#include <ns16550.h> +#include <serial.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct udevice_id x86_serial_ids[] = { + { .compatible = "x86-uart" }, + { } +}; + +static int x86_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + + plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "clock-frequency", 1843200); + + return 0; +} + +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_x86", + .id = UCLASS_SERIAL, + .of_match = x86_serial_ids, + .ofdata_to_platdata = x86_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, +}; diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index 7fb0b92078..75f0ec31bb 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -882,7 +882,7 @@ static int write_buffer (circbuf_t * buf) space_avail = current_urb->buffer_length - current_urb->actual_length; - popnum = min(space_avail, buf->size); + popnum = min(space_avail, (int)buf->size); if (popnum == 0) break; |