diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/core.c | 106 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 19 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-generic.c | 34 |
3 files changed, 122 insertions, 37 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 8d418c9412..8682556589 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -336,6 +336,34 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); } +static void dwc3_hsphy_mode_setup(struct dwc3 *dwc) +{ + enum usb_phy_interface hsphy_mode = dwc->hsphy_mode; + u32 reg; + + /* Set dwc3 usb2 phy config */ + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + + switch (hsphy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT); + break; + case USBPHY_INTERFACE_MODE_UTMIW: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT); + break; + default: + break; + } + + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); +} + /** * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core * @dwc: Pointer to our controller context structure @@ -384,6 +412,8 @@ static void dwc3_phy_setup(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + dwc3_hsphy_mode_setup(dwc); + mdelay(100); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); @@ -400,6 +430,12 @@ static void dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u2_susphy_quirk) reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + if (dwc->dis_enblslpm_quirk) + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + + if (dwc->dis_u2_freeclk_exists_quirk) + reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); mdelay(100); @@ -622,35 +658,6 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc) dwc3_gadget_run(dwc); } -static void dwc3_uboot_hsphy_mode(struct dwc3_device *dwc3_dev, - struct dwc3 *dwc) -{ - enum usb_phy_interface hsphy_mode = dwc3_dev->hsphy_mode; - u32 reg; - - /* Set dwc3 usb2 phy config */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - - switch (hsphy_mode) { - case USBPHY_INTERFACE_MODE_UTMI: - reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | - DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); - reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | - DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT); - break; - case USBPHY_INTERFACE_MODE_UTMIW: - reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | - DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); - reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) | - DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT); - break; - default: - break; - } - - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); -} - #define DWC3_ALIGN_MASK (16 - 1) /** @@ -721,6 +728,9 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) dwc->dis_u3_susphy_quirk = dwc3_dev->dis_u3_susphy_quirk; dwc->dis_u2_susphy_quirk = dwc3_dev->dis_u2_susphy_quirk; dwc->dis_del_phy_power_chg_quirk = dwc3_dev->dis_del_phy_power_chg_quirk; + dwc->dis_tx_ipgap_linecheck_quirk = dwc3_dev->dis_tx_ipgap_linecheck_quirk; + dwc->dis_enblslpm_quirk = dwc3_dev->dis_enblslpm_quirk; + dwc->dis_u2_freeclk_exists_quirk = dwc3_dev->dis_u2_freeclk_exists_quirk; dwc->tx_de_emphasis_quirk = dwc3_dev->tx_de_emphasis_quirk; if (dwc3_dev->tx_de_emphasis) @@ -736,6 +746,8 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) dwc->hird_threshold = hird_threshold | (dwc->is_utmi_l1_suspend << 4); + dwc->hsphy_mode = dwc3_dev->hsphy_mode; + dwc->index = dwc3_dev->index; dwc3_cache_hwparams(dwc); @@ -760,8 +772,6 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) goto err0; } - dwc3_uboot_hsphy_mode(dwc3_dev, dwc); - ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); @@ -894,6 +904,8 @@ void dwc3_of_parse(struct dwc3 *dwc) */ hird_threshold = 12; + dwc->hsphy_mode = usb_get_phy_mode(dev->node); + dwc->has_lpm_erratum = dev_read_bool(dev, "snps,has-lpm-erratum"); tmp = dev_read_u8_array_ptr(dev, "snps,lpm-nyet-threshold", 1); @@ -928,6 +940,12 @@ void dwc3_of_parse(struct dwc3 *dwc) "snps,dis_u2_susphy_quirk"); dwc->dis_del_phy_power_chg_quirk = dev_read_bool(dev, "snps,dis-del-phy-power-chg-quirk"); + dwc->dis_tx_ipgap_linecheck_quirk = dev_read_bool(dev, + "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->dis_enblslpm_quirk = dev_read_bool(dev, + "snps,dis_enblslpm_quirk"); + dwc->dis_u2_freeclk_exists_quirk = dev_read_bool(dev, + "snps,dis-u2-freeclk-exists-quirk"); dwc->tx_de_emphasis_quirk = dev_read_bool(dev, "snps,tx_de_emphasis_quirk"); tmp = dev_read_u8_array_ptr(dev, "snps,tx_de_emphasis", 1); @@ -944,6 +962,7 @@ void dwc3_of_parse(struct dwc3 *dwc) int dwc3_init(struct dwc3 *dwc) { int ret; + u32 reg; dwc3_cache_hwparams(dwc); @@ -965,6 +984,31 @@ int dwc3_init(struct dwc3 *dwc) goto event_fail; } + if (dwc->revision >= DWC3_REVISION_250A) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); + + /* + * Enable hardware control of sending remote wakeup + * in HS when the device is in the L1 state. + */ + if (dwc->revision >= DWC3_REVISION_290A) + reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW; + + if (dwc->dis_tx_ipgap_linecheck_quirk) + reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS; + + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + + if (dwc->dr_mode == USB_DR_MODE_HOST || + dwc->dr_mode == USB_DR_MODE_OTG) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL); + + reg |= DWC3_GUCTL_HSTINAUTORETRY; + + dwc3_writel(dwc->regs, DWC3_GUCTL, reg); + } + ret = dwc3_core_init_mode(dwc); if (ret) goto mode_fail; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 2b4c51a406..44533fd7fe 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -22,6 +22,7 @@ #include <linux/usb/ch9.h> #include <linux/usb/otg.h> +#include <linux/usb/phy.h> #define DWC3_MSG_MAX 500 @@ -74,6 +75,7 @@ #define DWC3_GCTL 0xc110 #define DWC3_GEVTEN 0xc114 #define DWC3_GSTS 0xc118 +#define DWC3_GUCTL1 0xc11c #define DWC3_GSNPSID 0xc120 #define DWC3_GGPIO 0xc124 #define DWC3_GUID 0xc128 @@ -160,9 +162,18 @@ #define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1) #define DWC3_GCTL_DSBLCLKGTNG (1 << 0) +/* Global User Control Register */ +#define DWC3_GUCTL_HSTINAUTORETRY BIT(14) + +/* Global User Control 1 Register */ +#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) +#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) + /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) +#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) #define DWC3_GUSB2PHYCFG_PHYIF(n) ((n) << 3) #define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) #define DWC3_GUSB2PHYCFG_USBTRDTIM(n) ((n) << 10) @@ -649,6 +660,9 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @dr_mode: requested mode of operation + * @hsphy_mode: UTMI phy mode, one of following: + * - USBPHY_INTERFACE_MODE_UTMI + * - USBPHY_INTERFACE_MODE_UTMIW * @dcfg: saved contents of DCFG register * @gctl: saved contents of GCTL register * @isoch_delay: wValue from Set Isochronous Delay request; @@ -740,6 +754,7 @@ struct dwc3 { size_t regs_size; enum usb_dr_mode dr_mode; + enum usb_phy_interface hsphy_mode; /* used for suspend/resume */ u32 dcfg; @@ -770,6 +785,7 @@ struct dwc3 { #define DWC3_REVISION_260A 0x5533260a #define DWC3_REVISION_270A 0x5533270a #define DWC3_REVISION_280A 0x5533280a +#define DWC3_REVISION_290A 0x5533290a enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -823,6 +839,9 @@ struct dwc3 { unsigned dis_u3_susphy_quirk:1; unsigned dis_u2_susphy_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; + unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned dis_enblslpm_quirk:1; + unsigned dis_u2_freeclk_exists_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c index 484e7a7b8c..551f682024 100644 --- a/drivers/usb/dwc3/dwc3-generic.c +++ b/drivers/usb/dwc3/dwc3-generic.c @@ -16,6 +16,7 @@ #include <dm/lists.h> #include <dwc3-uboot.h> #include <linux/bitops.h> +#include <linux/delay.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <malloc.h> @@ -26,6 +27,12 @@ #include <clk.h> #include <usb/xhci.h> +struct dwc3_glue_data { + struct clk_bulk clks; + struct reset_ctl_bulk resets; + fdt_addr_t regs; +}; + struct dwc3_generic_plat { fdt_addr_t base; u32 maximum_speed; @@ -49,6 +56,7 @@ static int dwc3_generic_probe(struct udevice *dev, int rc; struct dwc3_generic_plat *plat = dev_get_platdata(dev); struct dwc3 *dwc3 = &priv->dwc3; + struct dwc3_glue_data *glue = dev_get_platdata(dev->parent); dwc3->dev = dev; dwc3->maximum_speed = plat->maximum_speed; @@ -57,10 +65,22 @@ static int dwc3_generic_probe(struct udevice *dev, dwc3_of_parse(dwc3); #endif + /* + * It must hold whole USB3.0 OTG controller in resetting to hold pipe + * power state in P2 before initializing TypeC PHY on RK3399 platform. + */ + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) { + reset_assert_bulk(&glue->resets); + udelay(1); + } + rc = dwc3_setup_phy(dev, &priv->phys); if (rc) return rc; + if (device_is_compatible(dev->parent, "rockchip,rk3399-dwc3")) + reset_deassert_bulk(&glue->resets); + priv->base = map_physmem(plat->base, DWC3_OTG_REGS_END, MAP_NOCACHE); dwc3->regs = priv->base + DWC3_GLOBALS_REGS_START; @@ -188,12 +208,6 @@ U_BOOT_DRIVER(dwc3_generic_host) = { }; #endif -struct dwc3_glue_data { - struct clk_bulk clks; - struct reset_ctl_bulk resets; - fdt_addr_t regs; -}; - struct dwc3_glue_ops { void (*select_dr_mode)(struct udevice *dev, int index, enum usb_dr_mode mode); @@ -396,6 +410,12 @@ static int dwc3_glue_probe(struct udevice *dev) if (ret) return ret; + if (glue->resets.count == 0) { + ret = dwc3_glue_reset_init(child, glue); + if (ret) + return ret; + } + while (child) { enum usb_dr_mode dr_mode; @@ -427,6 +447,8 @@ static const struct udevice_id dwc3_glue_ids[] = { { .compatible = "ti,dwc3", .data = (ulong)&ti_ops }, { .compatible = "ti,am437x-dwc3", .data = (ulong)&ti_ops }, { .compatible = "ti,am654-dwc3" }, + { .compatible = "rockchip,rk3328-dwc3" }, + { .compatible = "rockchip,rk3399-dwc3" }, { } }; |