diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/eth/asix.c | 41 | ||||
-rw-r--r-- | drivers/usb/gadget/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/gadget/composite.c | 4 | ||||
-rw-r--r-- | drivers/usb/gadget/f_dfu.c | 13 | ||||
-rw-r--r-- | drivers/usb/gadget/f_mass_storage.c | 11 | ||||
-rw-r--r-- | drivers/usb/gadget/fotg210.c | 948 | ||||
-rw-r--r-- | drivers/usb/gadget/g_dnl.c | 7 | ||||
-rw-r--r-- | drivers/usb/gadget/gadget_chips.h | 8 | ||||
-rw-r--r-- | drivers/usb/gadget/pxa25x_udc.c | 13 | ||||
-rw-r--r-- | drivers/usb/gadget/pxa27x_udc.c | 14 | ||||
-rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/usb/host/ehci-faraday.c | 148 | ||||
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 74 | ||||
-rw-r--r-- | drivers/usb/musb-new/musb_uboot.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_hcd.c | 3 | ||||
-rw-r--r-- | drivers/usb/musb/musb_udc.c | 3 |
16 files changed, 1232 insertions, 59 deletions
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c index 75ec8f7881..db39bd86f5 100644 --- a/drivers/usb/eth/asix.c +++ b/drivers/usb/eth/asix.c @@ -407,46 +407,40 @@ static int asix_basic_reset(struct ueth_data *dev) rx_ctl = asix_read_rx_ctl(dev); debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); - return 0; -} - -/* - * Asix callbacks - */ -static int asix_init(struct eth_device *eth, bd_t *bd) -{ - struct ueth_data *dev = (struct ueth_data *)eth->priv; - int timeout = 0; -#define TIMEOUT_RESOLUTION 50 /* ms */ - int link_detected; - - debug("** %s()\n", __func__); - dev->phy_id = asix_get_phy_addr(dev); if (dev->phy_id < 0) debug("Failed to read phy id\n"); - if (asix_sw_reset(dev, AX_SWRESET_PRL) < 0) - goto out_err; - - if (asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL) < 0) - goto out_err; - asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET); asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA); mii_nway_restart(dev); if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0) - goto out_err; + return -1; if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0, AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, AX88772_IPG2_DEFAULT, 0, NULL) < 0) { debug("Write IPG,IPG1,IPG2 failed\n"); - goto out_err; + return -1; } + return 0; +} + +/* + * Asix callbacks + */ +static int asix_init(struct eth_device *eth, bd_t *bd) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + int timeout = 0; +#define TIMEOUT_RESOLUTION 50 /* ms */ + int link_detected; + + debug("** %s()\n", __func__); + if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0) goto out_err; @@ -591,6 +585,7 @@ struct asix_dongle { static const struct asix_dongle const asix_dongles[] = { { 0x05ac, 0x1402, FLAG_TYPE_AX88772 }, /* Apple USB Ethernet Adapter */ { 0x07d1, 0x3c05, FLAG_TYPE_AX88772 }, /* D-Link DUB-E100 H/W Ver B1 */ + { 0x2001, 0x1a02, FLAG_TYPE_AX88772 }, /* D-Link DUB-E100 H/W Ver C1 */ /* Cables-to-Go USB Ethernet Adapter */ { 0x0b95, 0x772a, FLAG_TYPE_AX88772 }, { 0x0b95, 0x7720, FLAG_TYPE_AX88772 }, /* Trendnet TU2-ET100 V3.0R */ diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index e545b6be6b..432cf178cf 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -35,6 +35,7 @@ endif # new USB gadget layer dependencies ifdef CONFIG_USB_GADGET COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o +COBJS-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o endif diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 2c5600ed52..f8677931b4 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -997,7 +997,8 @@ static int composite_bind(struct usb_gadget *gadget) if (status < 0) goto fail; - cdev->desc = *composite->dev; + memcpy(&cdev->desc, composite->dev, + sizeof(struct usb_device_descriptor)); cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket; debug("%s: ready\n", composite->name); @@ -1098,4 +1099,5 @@ void usb_composite_unregister(struct usb_composite_driver *driver) if (composite != driver) return; usb_gadget_unregister_driver(&composite_driver); + composite = NULL; } diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index a322ae5eb8..d7ae0c0c6a 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -5,6 +5,13 @@ * authors: Andrzej Pietrasiewicz <andrzej.p@samsung.com> * Lukasz Majewski <l.majewski@samsung.com> * + * Based on OpenMoko u-boot: drivers/usb/usbdfu.c + * (C) 2007 by OpenMoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * + * based on existing SAM7DFU code from OpenPCD: + * (C) Copyright 2006 by Harald Welte <hwelte at hmw-consulting.de> + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -183,6 +190,7 @@ static inline void to_dfu_mode(struct f_dfu *f_dfu) { f_dfu->usb_function.strings = dfu_strings; f_dfu->usb_function.hs_descriptors = f_dfu->function; + f_dfu->dfu_state = DFU_STATE_dfuIDLE; } static inline void to_runtime_mode(struct f_dfu *f_dfu) @@ -233,7 +241,6 @@ static int state_app_idle(struct f_dfu *f_dfu, case USB_REQ_DFU_DETACH: f_dfu->dfu_state = DFU_STATE_appDETACH; to_dfu_mode(f_dfu); - f_dfu->dfu_state = DFU_STATE_dfuIDLE; value = RET_ZLP; break; default: @@ -589,7 +596,7 @@ static int dfu_prepare_function(struct f_dfu *f_dfu, int n) struct usb_interface_descriptor *d; int i = 0; - f_dfu->function = calloc(sizeof(struct usb_descriptor_header *), n); + f_dfu->function = calloc(sizeof(struct usb_descriptor_header *), n + 1); if (!f_dfu->function) goto enomem; @@ -653,6 +660,8 @@ static int dfu_bind(struct usb_configuration *c, struct usb_function *f) ->iInterface = id; } + to_dfu_mode(f_dfu); + stringtab_dfu.strings = f_dfu->strings; cdev->req->context = f_dfu; diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index c28866f7d3..5b348d7a6e 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -577,9 +577,9 @@ static int fsg_setup(struct usb_function *f, { struct fsg_dev *fsg = fsg_from_func(f); struct usb_request *req = fsg->common->ep0req; - u16 w_index = le16_to_cpu(ctrl->wIndex); - u16 w_value = le16_to_cpu(ctrl->wValue); - u16 w_length = le16_to_cpu(ctrl->wLength); + u16 w_index = get_unaligned_le16(&ctrl->wIndex); + u16 w_value = get_unaligned_le16(&ctrl->wValue); + u16 w_length = get_unaligned_le16(&ctrl->wLength); if (!fsg_is_set(fsg->common)) return -EOPNOTSUPP; @@ -617,7 +617,7 @@ static int fsg_setup(struct usb_function *f, "unknown class-specific control req " "%02x.%02x v%04x i%04x l%u\n", ctrl->bRequestType, ctrl->bRequest, - le16_to_cpu(ctrl->wValue), w_index, w_length); + get_unaligned_le16(&ctrl->wValue), w_index, w_length); return -EOPNOTSUPP; } @@ -2261,7 +2261,8 @@ reset: if (rc) goto reset; fsg->bulk_out_enabled = 1; - common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + common->bulk_out_maxpacket = + le16_to_cpu(get_unaligned(&d->wMaxPacketSize)); clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); /* Allocate the requests */ diff --git a/drivers/usb/gadget/fotg210.c b/drivers/usb/gadget/fotg210.c new file mode 100644 index 0000000000..d003331bae --- /dev/null +++ b/drivers/usb/gadget/fotg210.c @@ -0,0 +1,948 @@ +/* + * Faraday USB 2.0 OTG Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#include <common.h> +#include <command.h> +#include <config.h> +#include <net.h> +#include <malloc.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <linux/types.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include <usb/fotg210.h> + +#define CFG_NUM_ENDPOINTS 4 +#define CFG_EP0_MAX_PACKET_SIZE 64 +#define CFG_EPX_MAX_PACKET_SIZE 512 + +#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 2) /* 250 ms */ + +struct fotg210_chip; + +struct fotg210_ep { + struct usb_ep ep; + + uint maxpacket; + uint id; + uint stopped; + + struct list_head queue; + struct fotg210_chip *chip; + const struct usb_endpoint_descriptor *desc; +}; + +struct fotg210_request { + struct usb_request req; + struct list_head queue; + struct fotg210_ep *ep; +}; + +struct fotg210_chip { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct fotg210_regs *regs; + uint8_t irq; + uint16_t addr; + int pullup; + enum usb_device_state state; + struct fotg210_ep ep[1 + CFG_NUM_ENDPOINTS]; +}; + +static struct usb_endpoint_descriptor ep0_desc = { + .bLength = sizeof(struct usb_endpoint_descriptor), + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, +}; + +static inline int fifo_to_ep(struct fotg210_chip *chip, int id, int in) +{ + return (id < 0) ? 0 : ((id & 0x03) + 1); +} + +static inline int ep_to_fifo(struct fotg210_chip *chip, int id) +{ + return (id <= 0) ? -1 : ((id - 1) & 0x03); +} + +static inline int ep_reset(struct fotg210_chip *chip, uint8_t ep_addr) +{ + int ep = ep_addr & USB_ENDPOINT_NUMBER_MASK; + struct fotg210_regs *regs = chip->regs; + + if (ep_addr & USB_DIR_IN) { + /* reset endpoint */ + setbits_le32(®s->iep[ep - 1], IEP_RESET); + mdelay(1); + clrbits_le32(®s->iep[ep - 1], IEP_RESET); + /* clear endpoint stall */ + clrbits_le32(®s->iep[ep - 1], IEP_STALL); + } else { + /* reset endpoint */ + setbits_le32(®s->oep[ep - 1], OEP_RESET); + mdelay(1); + clrbits_le32(®s->oep[ep - 1], OEP_RESET); + /* clear endpoint stall */ + clrbits_le32(®s->oep[ep - 1], OEP_STALL); + } + + return 0; +} + +static int fotg210_reset(struct fotg210_chip *chip) +{ + struct fotg210_regs *regs = chip->regs; + uint32_t i; + + chip->state = USB_STATE_POWERED; + + /* chip enable */ + writel(DEVCTRL_EN, ®s->dev_ctrl); + + /* device address reset */ + chip->addr = 0; + writel(0, ®s->dev_addr); + + /* set idle counter to 7ms */ + writel(7, ®s->idle); + + /* disable all interrupts */ + writel(IMR_MASK, ®s->imr); + writel(GIMR_MASK, ®s->gimr); + writel(GIMR0_MASK, ®s->gimr0); + writel(GIMR1_MASK, ®s->gimr1); + writel(GIMR2_MASK, ®s->gimr2); + + /* clear interrupts */ + writel(ISR_MASK, ®s->isr); + writel(0, ®s->gisr); + writel(0, ®s->gisr0); + writel(0, ®s->gisr1); + writel(0, ®s->gisr2); + + /* chip reset */ + setbits_le32(®s->dev_ctrl, DEVCTRL_RESET); + mdelay(10); + if (readl(®s->dev_ctrl) & DEVCTRL_RESET) { + printf("fotg210: chip reset failed\n"); + return -1; + } + + /* CX FIFO reset */ + setbits_le32(®s->cxfifo, CXFIFO_CXFIFOCLR); + mdelay(10); + if (readl(®s->cxfifo) & CXFIFO_CXFIFOCLR) { + printf("fotg210: ep0 fifo reset failed\n"); + return -1; + } + + /* create static ep-fifo map (EP1 <-> FIFO0, EP2 <-> FIFO1 ...) */ + writel(EPMAP14_DEFAULT, ®s->epmap14); + writel(EPMAP58_DEFAULT, ®s->epmap58); + writel(FIFOMAP_DEFAULT, ®s->fifomap); + writel(0, ®s->fifocfg); + for (i = 0; i < 8; ++i) { + writel(CFG_EPX_MAX_PACKET_SIZE, ®s->iep[i]); + writel(CFG_EPX_MAX_PACKET_SIZE, ®s->oep[i]); + } + + /* FIFO reset */ + for (i = 0; i < 4; ++i) { + writel(FIFOCSR_RESET, ®s->fifocsr[i]); + mdelay(10); + if (readl(®s->fifocsr[i]) & FIFOCSR_RESET) { + printf("fotg210: fifo%d reset failed\n", i); + return -1; + } + } + + /* enable only device interrupt and triggered at level-high */ + writel(IMR_IRQLH | IMR_HOST | IMR_OTG, ®s->imr); + writel(ISR_MASK, ®s->isr); + /* disable EP0 IN/OUT interrupt */ + writel(GIMR0_CXOUT | GIMR0_CXIN, ®s->gimr0); + /* disable EPX IN+SPK+OUT interrupts */ + writel(GIMR1_MASK, ®s->gimr1); + /* disable wakeup+idle+dma+zlp interrupts */ + writel(GIMR2_WAKEUP | GIMR2_IDLE | GIMR2_DMAERR | GIMR2_DMAFIN + | GIMR2_ZLPRX | GIMR2_ZLPTX, ®s->gimr2); + /* enable all group interrupt */ + writel(0, ®s->gimr); + + /* suspend delay = 3 ms */ + writel(3, ®s->idle); + + /* turn-on device interrupts */ + setbits_le32(®s->dev_ctrl, DEVCTRL_GIRQ_EN); + + return 0; +} + +static inline int fotg210_cxwait(struct fotg210_chip *chip, uint32_t mask) +{ + struct fotg210_regs *regs = chip->regs; + int ret = -1; + ulong ts; + + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + if ((readl(®s->cxfifo) & mask) != mask) + continue; + ret = 0; + break; + } + + if (ret) + printf("fotg210: cx/ep0 timeout\n"); + + return ret; +} + +static int fotg210_dma(struct fotg210_ep *ep, struct fotg210_request *req) +{ + struct fotg210_chip *chip = ep->chip; + struct fotg210_regs *regs = chip->regs; + uint32_t tmp, ts; + uint8_t *buf = req->req.buf + req->req.actual; + uint32_t len = req->req.length - req->req.actual; + int fifo = ep_to_fifo(chip, ep->id); + int ret = -EBUSY; + + /* 1. init dma buffer */ + if (len > ep->maxpacket) + len = ep->maxpacket; + + /* 2. wait for dma ready (hardware) */ + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + if (!(readl(®s->dma_ctrl) & DMACTRL_START)) { + ret = 0; + break; + } + } + if (ret) { + printf("fotg210: dma busy\n"); + req->req.status = ret; + return ret; + } + + /* 3. DMA target setup */ + if (ep->desc->bEndpointAddress & USB_DIR_IN) + flush_dcache_range((ulong)buf, (ulong)buf + len); + else + invalidate_dcache_range((ulong)buf, (ulong)buf + len); + + writel(virt_to_phys(buf), ®s->dma_addr); + + if (ep->desc->bEndpointAddress & USB_DIR_IN) { + if (ep->id == 0) { + /* Wait until cx/ep0 fifo empty */ + fotg210_cxwait(chip, CXFIFO_CXFIFOE); + writel(DMAFIFO_CX, ®s->dma_fifo); + } else { + /* Wait until epx fifo empty */ + fotg210_cxwait(chip, CXFIFO_FIFOE(fifo)); + writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo); + } + writel(DMACTRL_LEN(len) | DMACTRL_MEM2FIFO, ®s->dma_ctrl); + } else { + uint32_t blen; + + if (ep->id == 0) { + writel(DMAFIFO_CX, ®s->dma_fifo); + do { + blen = CXFIFO_BYTES(readl(®s->cxfifo)); + } while (blen < len); + } else { + writel(DMAFIFO_FIFO(fifo), ®s->dma_fifo); + blen = FIFOCSR_BYTES(readl(®s->fifocsr[fifo])); + } + len = (len < blen) ? len : blen; + writel(DMACTRL_LEN(len) | DMACTRL_FIFO2MEM, ®s->dma_ctrl); + } + + /* 4. DMA start */ + setbits_le32(®s->dma_ctrl, DMACTRL_START); + + /* 5. DMA wait */ + ret = -EBUSY; + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + tmp = readl(®s->gisr2); + /* DMA complete */ + if (tmp & GISR2_DMAFIN) { + ret = 0; + break; + } + /* DMA error */ + if (tmp & GISR2_DMAERR) { + printf("fotg210: dma error\n"); + break; + } + /* resume, suspend, reset */ + if (tmp & (GISR2_RESUME | GISR2_SUSPEND | GISR2_RESET)) { + printf("fotg210: dma reset by host\n"); + break; + } + } + + /* 7. DMA target reset */ + if (ret) + writel(DMACTRL_ABORT | DMACTRL_CLRFF, ®s->dma_ctrl); + + writel(0, ®s->gisr2); + writel(0, ®s->dma_fifo); + + req->req.status = ret; + if (!ret) + req->req.actual += len; + else + printf("fotg210: ep%d dma error(code=%d)\n", ep->id, ret); + + return len; +} + +/* + * result of setup packet + */ +#define CX_IDLE 0 +#define CX_FINISH 1 +#define CX_STALL 2 + +static void fotg210_setup(struct fotg210_chip *chip) +{ + int id, ret = CX_IDLE; + uint32_t tmp[2]; + struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)tmp; + struct fotg210_regs *regs = chip->regs; + + /* + * If this is the first Cx 8 byte command, + * we can now query USB mode (high/full speed; USB 2.0/USB 1.0) + */ + if (chip->state == USB_STATE_POWERED) { + chip->state = USB_STATE_DEFAULT; + if (readl(®s->otgcsr) & OTGCSR_DEV_B) { + /* Mini-B */ + if (readl(®s->dev_ctrl) & DEVCTRL_HS) { + puts("fotg210: HS\n"); + chip->gadget.speed = USB_SPEED_HIGH; + /* SOF mask timer = 1100 ticks */ + writel(SOFMTR_TMR(1100), ®s->sof_mtr); + } else { + puts("fotg210: FS\n"); + chip->gadget.speed = USB_SPEED_FULL; + /* SOF mask timer = 10000 ticks */ + writel(SOFMTR_TMR(10000), ®s->sof_mtr); + } + } else { + printf("fotg210: mini-A?\n"); + } + } + + /* switch data port to ep0 */ + writel(DMAFIFO_CX, ®s->dma_fifo); + /* fetch 8 bytes setup packet */ + tmp[0] = readl(®s->ep0_data); + tmp[1] = readl(®s->ep0_data); + /* release data port */ + writel(0, ®s->dma_fifo); + + if (req->bRequestType & USB_DIR_IN) + ep0_desc.bEndpointAddress = USB_DIR_IN; + else + ep0_desc.bEndpointAddress = USB_DIR_OUT; + + ret = CX_IDLE; + + if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (req->bRequest) { + case USB_REQ_SET_CONFIGURATION: + debug("fotg210: set_cfg(%d)\n", req->wValue & 0x00FF); + if (!(req->wValue & 0x00FF)) { + chip->state = USB_STATE_ADDRESS; + writel(chip->addr, ®s->dev_addr); + } else { + chip->state = USB_STATE_CONFIGURED; + writel(chip->addr | DEVADDR_CONF, + ®s->dev_addr); + } + ret = CX_IDLE; + break; + + case USB_REQ_SET_ADDRESS: + debug("fotg210: set_addr(0x%04X)\n", req->wValue); + chip->state = USB_STATE_ADDRESS; + chip->addr = req->wValue & DEVADDR_ADDR_MASK; + ret = CX_FINISH; + writel(chip->addr, ®s->dev_addr); + break; + + case USB_REQ_CLEAR_FEATURE: + debug("fotg210: clr_feature(%d, %d)\n", + req->bRequestType & 0x03, req->wValue); + switch (req->wValue) { + case 0: /* [Endpoint] halt */ + ep_reset(chip, req->wIndex); + ret = CX_FINISH; + break; + case 1: /* [Device] remote wake-up */ + case 2: /* [Device] test mode */ + default: + ret = CX_STALL; + break; + } + break; + + case USB_REQ_SET_FEATURE: + debug("fotg210: set_feature(%d, %d)\n", + req->wValue, req->wIndex & 0xf); + switch (req->wValue) { + case 0: /* Endpoint Halt */ + id = req->wIndex & 0xf; + setbits_le32(®s->iep[id - 1], IEP_STALL); + setbits_le32(®s->oep[id - 1], OEP_STALL); + ret = CX_FINISH; + break; + case 1: /* Remote Wakeup */ + case 2: /* Test Mode */ + default: + ret = CX_STALL; + break; + } + break; + + case USB_REQ_GET_STATUS: + debug("fotg210: get_status\n"); + ret = CX_STALL; + break; + + case USB_REQ_SET_DESCRIPTOR: + debug("fotg210: set_descriptor\n"); + ret = CX_STALL; + break; + + case USB_REQ_SYNCH_FRAME: + debug("fotg210: sync frame\n"); + ret = CX_STALL; + break; + } + } /* if ((req->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) */ + + if (ret == CX_IDLE && chip->driver->setup) { + if (chip->driver->setup(&chip->gadget, req) < 0) + ret = CX_STALL; + else + ret = CX_FINISH; + } + + switch (ret) { + case CX_FINISH: + setbits_le32(®s->cxfifo, CXFIFO_CXFIN); + break; + + case CX_STALL: + setbits_le32(®s->cxfifo, CXFIFO_CXSTALL | CXFIFO_CXFIN); + printf("fotg210: cx_stall!\n"); + break; + + case CX_IDLE: + debug("fotg210: cx_idle?\n"); + default: + break; + } +} + +/* + * fifo - FIFO id + * zlp - zero length packet + */ +static void fotg210_recv(struct fotg210_chip *chip, int ep_id) +{ + struct fotg210_regs *regs = chip->regs; + struct fotg210_ep *ep = chip->ep + ep_id; + struct fotg210_request *req; + int len; + + if (ep->stopped || (ep->desc->bEndpointAddress & USB_DIR_IN)) { + printf("fotg210: ep%d recv, invalid!\n", ep->id); + return; + } + + if (list_empty(&ep->queue)) { + printf("fotg210: ep%d recv, drop!\n", ep->id); + return; + } + + req = list_first_entry(&ep->queue, struct fotg210_request, queue); + len = fotg210_dma(ep, req); + if (len < ep->ep.maxpacket || req->req.length <= req->req.actual) { + list_del_init(&req->queue); + if (req->req.complete) + req->req.complete(&ep->ep, &req->req); + } + + if (ep->id > 0 && list_empty(&ep->queue)) { + setbits_le32(®s->gimr1, + GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id))); + } +} + +/* + * USB Gadget Layer + */ +static int fotg210_ep_enable( + struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); + struct fotg210_chip *chip = ep->chip; + struct fotg210_regs *regs = chip->regs; + int id = ep_to_fifo(chip, ep->id); + int in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0; + + if (!_ep || !desc + || desc->bDescriptorType != USB_DT_ENDPOINT + || le16_to_cpu(desc->wMaxPacketSize) == 0) { + printf("fotg210: bad ep or descriptor\n"); + return -EINVAL; + } + + ep->desc = desc; + ep->stopped = 0; + + if (in) + setbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_IN)); + + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + return -EINVAL; + + case USB_ENDPOINT_XFER_ISOC: + setbits_le32(®s->fifocfg, + FIFOCFG(id, FIFOCFG_EN | FIFOCFG_ISOC)); + break; + + case USB_ENDPOINT_XFER_BULK: + setbits_le32(®s->fifocfg, + FIFOCFG(id, FIFOCFG_EN | FIFOCFG_BULK)); + break; + + case USB_ENDPOINT_XFER_INT: + setbits_le32(®s->fifocfg, + FIFOCFG(id, FIFOCFG_EN | FIFOCFG_INTR)); + break; + } + + return 0; +} + +static int fotg210_ep_disable(struct usb_ep *_ep) +{ + struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); + struct fotg210_chip *chip = ep->chip; + struct fotg210_regs *regs = chip->regs; + int id = ep_to_fifo(chip, ep->id); + + ep->desc = NULL; + ep->stopped = 1; + + clrbits_le32(®s->fifocfg, FIFOCFG(id, FIFOCFG_CFG_MASK)); + clrbits_le32(®s->fifomap, FIFOMAP(id, FIFOMAP_DIR_MASK)); + + return 0; +} + +static struct usb_request *fotg210_ep_alloc_request( + struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct fotg210_request *req = malloc(sizeof(*req)); + + if (req) { + memset(req, 0, sizeof(*req)); + INIT_LIST_HEAD(&req->queue); + } + return &req->req; +} + +static void fotg210_ep_free_request( + struct usb_ep *_ep, struct usb_request *_req) +{ + struct fotg210_request *req; + + req = container_of(_req, struct fotg210_request, req); + free(req); +} + +static int fotg210_ep_queue( + struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); + struct fotg210_chip *chip = ep->chip; + struct fotg210_regs *regs = chip->regs; + struct fotg210_request *req; + + req = container_of(_req, struct fotg210_request, req); + if (!_req || !_req->complete || !_req->buf + || !list_empty(&req->queue)) { + printf("fotg210: invalid request to ep%d\n", ep->id); + return -EINVAL; + } + + if (!chip || chip->state == USB_STATE_SUSPENDED) { + printf("fotg210: request while chip suspended\n"); + return -EINVAL; + } + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + + if (req->req.length == 0) { + req->req.status = 0; + if (req->req.complete) + req->req.complete(&ep->ep, &req->req); + return 0; + } + + if (ep->id == 0) { + do { + int len = fotg210_dma(ep, req); + if (len < ep->ep.maxpacket) + break; + if (ep->desc->bEndpointAddress & USB_DIR_IN) + udelay(100); + } while (req->req.length > req->req.actual); + } else { + if (ep->desc->bEndpointAddress & USB_DIR_IN) { + do { + int len = fotg210_dma(ep, req); + if (len < ep->ep.maxpacket) + break; + } while (req->req.length > req->req.actual); + } else { + list_add_tail(&req->queue, &ep->queue); + clrbits_le32(®s->gimr1, + GIMR1_FIFO_RX(ep_to_fifo(chip, ep->id))); + } + } + + if (ep->id == 0 || (ep->desc->bEndpointAddress & USB_DIR_IN)) { + if (req->req.complete) + req->req.complete(&ep->ep, &req->req); + } + + return 0; +} + +static int fotg210_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); + struct fotg210_request *req; + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) + return -EINVAL; + + /* remove the request */ + list_del_init(&req->queue); + + /* update status & invoke complete callback */ + if (req->req.status == -EINPROGRESS) { + req->req.status = -ECONNRESET; + if (req->req.complete) + req->req.complete(_ep, &req->req); + } + + return 0; +} + +static int fotg210_ep_halt(struct usb_ep *_ep, int halt) +{ + struct fotg210_ep *ep = container_of(_ep, struct fotg210_ep, ep); + struct fotg210_chip *chip = ep->chip; + struct fotg210_regs *regs = chip->regs; + int ret = -1; + + debug("fotg210: ep%d halt=%d\n", ep->id, halt); + + /* Endpoint STALL */ + if (ep->id > 0 && ep->id <= CFG_NUM_ENDPOINTS) { + if (halt) { + /* wait until all ep fifo empty */ + fotg210_cxwait(chip, 0xf00); + /* stall */ + if (ep->desc->bEndpointAddress & USB_DIR_IN) { + setbits_le32(®s->iep[ep->id - 1], + IEP_STALL); + } else { + setbits_le32(®s->oep[ep->id - 1], + OEP_STALL); + } + } else { + if (ep->desc->bEndpointAddress & USB_DIR_IN) { + clrbits_le32(®s->iep[ep->id - 1], + IEP_STALL); + } else { + clrbits_le32(®s->oep[ep->id - 1], + OEP_STALL); + } + } + ret = 0; + } + + return ret; +} + +/* + * activate/deactivate link with host. + */ +static void pullup(struct fotg210_chip *chip, int is_on) +{ + struct fotg210_regs *regs = chip->regs; + + if (is_on) { + if (!chip->pullup) { + chip->state = USB_STATE_POWERED; + chip->pullup = 1; + /* enable the chip */ + setbits_le32(®s->dev_ctrl, DEVCTRL_EN); + /* clear unplug bit (BIT0) */ + clrbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG); + } + } else { + chip->state = USB_STATE_NOTATTACHED; + chip->pullup = 0; + chip->addr = 0; + writel(chip->addr, ®s->dev_addr); + /* set unplug bit (BIT0) */ + setbits_le32(®s->phy_tmsr, PHYTMSR_UNPLUG); + /* disable the chip */ + clrbits_le32(®s->dev_ctrl, DEVCTRL_EN); + } +} + +static int fotg210_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct fotg210_chip *chip; + + chip = container_of(_gadget, struct fotg210_chip, gadget); + + debug("fotg210: pullup=%d\n", is_on); + + pullup(chip, is_on); + + return 0; +} + +static int fotg210_get_frame(struct usb_gadget *_gadget) +{ + struct fotg210_chip *chip; + struct fotg210_regs *regs; + + chip = container_of(_gadget, struct fotg210_chip, gadget); + regs = chip->regs; + + return SOFFNR_FNR(readl(®s->sof_fnr)); +} + +static struct usb_gadget_ops fotg210_gadget_ops = { + .get_frame = fotg210_get_frame, + .pullup = fotg210_pullup, +}; + +static struct usb_ep_ops fotg210_ep_ops = { + .enable = fotg210_ep_enable, + .disable = fotg210_ep_disable, + .queue = fotg210_ep_queue, + .dequeue = fotg210_ep_dequeue, + .set_halt = fotg210_ep_halt, + .alloc_request = fotg210_ep_alloc_request, + .free_request = fotg210_ep_free_request, +}; + +static struct fotg210_chip controller = { + .regs = (void __iomem *)CONFIG_FOTG210_BASE, + .gadget = { + .name = "fotg210_udc", + .ops = &fotg210_gadget_ops, + .ep0 = &controller.ep[0].ep, + .speed = USB_SPEED_UNKNOWN, + .is_dualspeed = 1, + .is_otg = 0, + .is_a_peripheral = 0, + .b_hnp_enable = 0, + .a_hnp_support = 0, + .a_alt_hnp_support = 0, + }, + .ep[0] = { + .id = 0, + .ep = { + .name = "ep0", + .ops = &fotg210_ep_ops, + }, + .desc = &ep0_desc, + .chip = &controller, + .maxpacket = CFG_EP0_MAX_PACKET_SIZE, + }, + .ep[1] = { + .id = 1, + .ep = { + .name = "ep1", + .ops = &fotg210_ep_ops, + }, + .chip = &controller, + .maxpacket = CFG_EPX_MAX_PACKET_SIZE, + }, + .ep[2] = { + .id = 2, + .ep = { + .name = "ep2", + .ops = &fotg210_ep_ops, + }, + .chip = &controller, + .maxpacket = CFG_EPX_MAX_PACKET_SIZE, + }, + .ep[3] = { + .id = 3, + .ep = { + .name = "ep3", + .ops = &fotg210_ep_ops, + }, + .chip = &controller, + .maxpacket = CFG_EPX_MAX_PACKET_SIZE, + }, + .ep[4] = { + .id = 4, + .ep = { + .name = "ep4", + .ops = &fotg210_ep_ops, + }, + .chip = &controller, + .maxpacket = CFG_EPX_MAX_PACKET_SIZE, + }, +}; + +int usb_gadget_handle_interrupts(void) +{ + struct fotg210_chip *chip = &controller; + struct fotg210_regs *regs = chip->regs; + uint32_t id, st, isr, gisr; + + isr = readl(®s->isr) & (~readl(®s->imr)); + gisr = readl(®s->gisr) & (~readl(®s->gimr)); + if (!(isr & ISR_DEV) || !gisr) + return 0; + + writel(ISR_DEV, ®s->isr); + + /* CX interrupts */ + if (gisr & GISR_GRP0) { + st = readl(®s->gisr0); + writel(0, ®s->gisr0); + + if (st & GISR0_CXERR) + printf("fotg210: cmd error\n"); + + if (st & GISR0_CXABORT) + printf("fotg210: cmd abort\n"); + + if (st & GISR0_CXSETUP) /* setup */ + fotg210_setup(chip); + else if (st & GISR0_CXEND) /* command finish */ + setbits_le32(®s->cxfifo, CXFIFO_CXFIN); + } + + /* FIFO interrupts */ + if (gisr & GISR_GRP1) { + st = readl(®s->gisr1); + for (id = 0; id < 4; ++id) { + if (st & GISR1_RX_FIFO(id)) + fotg210_recv(chip, fifo_to_ep(chip, id, 0)); + } + } + + /* Device Status Interrupts */ + if (gisr & GISR_GRP2) { + st = readl(®s->gisr2); + writel(0, ®s->gisr2); + + if (st & GISR2_RESET) + printf("fotg210: reset by host\n"); + else if (st & GISR2_SUSPEND) + printf("fotg210: suspend/removed\n"); + else if (st & GISR2_RESUME) + printf("fotg210: resume\n"); + + /* Errors */ + if (st & GISR2_ISOCERR) + printf("fotg210: iso error\n"); + if (st & GISR2_ISOCABT) + printf("fotg210: iso abort\n"); + if (st & GISR2_DMAERR) + printf("fotg210: dma error\n"); + } + + return 0; +} + +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + int i, ret = 0; + struct fotg210_chip *chip = &controller; + + if (!driver || !driver->bind || !driver->setup) { + puts("fotg210: bad parameter.\n"); + return -EINVAL; + } + + INIT_LIST_HEAD(&chip->gadget.ep_list); + for (i = 0; i < CFG_NUM_ENDPOINTS + 1; ++i) { + struct fotg210_ep *ep = chip->ep + i; + + ep->ep.maxpacket = ep->maxpacket; + INIT_LIST_HEAD(&ep->queue); + + if (ep->id == 0) { + ep->stopped = 0; + } else { + ep->stopped = 1; + list_add_tail(&ep->ep.ep_list, &chip->gadget.ep_list); + } + } + + if (fotg210_reset(chip)) { + puts("fotg210: reset failed.\n"); + return -EINVAL; + } + + ret = driver->bind(&chip->gadget); + if (ret) { + debug("fotg210: driver->bind() returned %d\n", ret); + return ret; + } + chip->driver = driver; + + return ret; +} + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct fotg210_chip *chip = &controller; + + driver->unbind(&chip->gadget); + chip->driver = NULL; + + pullup(chip, 0); + + return 0; +} diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index cc3f3449c9..8a3777b6e0 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -125,6 +125,12 @@ static int g_dnl_config_register(struct usb_composite_dev *cdev) return usb_add_config(cdev, &config); } +__weak +int g_dnl_bind_fixup(struct usb_device_descriptor *dev) +{ + return 0; +} + static int g_dnl_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; @@ -147,6 +153,7 @@ static int g_dnl_bind(struct usb_composite_dev *cdev) g_dnl_string_defs[1].id = id; device_desc.iProduct = id; + g_dnl_bind_fixup(&device_desc); ret = g_dnl_config_register(cdev); if (ret) goto error; diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index e5701422fa..f038747e63 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -150,6 +150,12 @@ #define gadget_is_mv(g) 0 #endif +#ifdef CONFIG_USB_GADGET_FOTG210 +#define gadget_is_fotg210(g) (!strcmp("fotg210_udc", (g)->name)) +#else +#define gadget_is_fotg210(g) 0 +#endif + /* * CONFIG_USB_GADGET_SX2 * CONFIG_USB_GADGET_AU1X00 @@ -215,5 +221,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x20; else if (gadget_is_mv(gadget)) return 0x21; + else if (gadget_is_fotg210(gadget)) + return 0x22; return -ENOENT; } diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9ce98f0768..085503dbe8 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -314,7 +314,8 @@ static int pxa25x_ep_enable(struct usb_ep *_ep, if (!_ep || !desc || ep->desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || ep->bEndpointAddress != desc->bEndpointAddress - || ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { + || ep->fifo_size < + le16_to_cpu(get_unaligned(&desc->wMaxPacketSize))) { printf("%s, bad ep or descriptor\n", __func__); return -EINVAL; } @@ -329,9 +330,9 @@ static int pxa25x_ep_enable(struct usb_ep *_ep, /* hardware _could_ do smaller, but driver doesn't */ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK - && le16_to_cpu(desc->wMaxPacketSize) + && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) != BULK_FIFO_SIZE) - || !desc->wMaxPacketSize) { + || !get_unaligned(&desc->wMaxPacketSize)) { printf("%s, bad %s maxpacket\n", __func__, _ep->name); return -ERANGE; } @@ -345,7 +346,7 @@ static int pxa25x_ep_enable(struct usb_ep *_ep, ep->desc = desc; ep->stopped = 0; ep->pio_irqs = 0; - ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + ep->ep.maxpacket = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)); /* flush fifo (mostly for OUT buffers) */ pxa25x_ep_fifo_flush(_ep); @@ -485,7 +486,7 @@ write_fifo(struct pxa25x_ep *ep, struct pxa25x_request *req) { unsigned max; - max = le16_to_cpu(ep->desc->wMaxPacketSize); + max = le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize)); do { unsigned count; int is_last, is_short; @@ -766,7 +767,7 @@ pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) */ if (unlikely(ep->bmAttributes == USB_ENDPOINT_XFER_ISOC && req->req.length > - le16_to_cpu(ep->desc->wMaxPacketSize))) + le16_to_cpu(get_unaligned(&ep->desc->wMaxPacketSize)))) return -EMSGSIZE; debug_cond(NOISY, "%s queue req %p, len %d buf %p\n", diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 71cc0f2a05..598923dfc8 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -151,7 +151,7 @@ static int udc_read_urb(struct usb_endpoint_instance *endpoint) struct urb *urb = endpoint->rcv_urb; int ep_num = endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; u32 *data32 = (u32 *) urb->buffer; - unsigned int i, n, is_short ; + unsigned int i, n; usbdbg("read urb on ep %d", ep_num); #if defined(USBDDBG) && defined(USBDPARANOIA) @@ -165,9 +165,8 @@ static int udc_read_urb(struct usb_endpoint_instance *endpoint) n = readl(UDCBCN(ep_num)) & 0x3ff; else /* zlp */ n = 0; - is_short = n != endpoint->rcv_packetSize; - usbdbg("n %d%s", n, is_short ? "-s" : ""); + usbdbg("n %d%s", n, n != endpoint->rcv_packetSize ? "-s" : ""); for (i = 0; i < n; i += 4) data32[urb->actual_length / 4 + i / 4] = readl(UDCDN(ep_num)); @@ -402,16 +401,13 @@ static void udc_handle_ep(struct usb_endpoint_instance *endpoint) static void udc_state_changed(void) { - int config, interface, alternate; writel(readl(UDCCR) | UDCCR_SMAC, UDCCR); - config = (readl(UDCCR) & UDCCR_ACN) >> UDCCR_ACN_S; - interface = (readl(UDCCR) & UDCCR_AIN) >> UDCCR_AIN_S; - alternate = (readl(UDCCR) & UDCCR_AAISN) >> UDCCR_AAISN_S; - usbdbg("New UDC settings are: conf %d - inter %d - alter %d", - config, interface, alternate); + (readl(UDCCR) & UDCCR_ACN) >> UDCCR_ACN_S, + (readl(UDCCR) & UDCCR_AIN) >> UDCCR_AIN_S, + (readl(UDCCR) & UDCCR_AAISN) >> UDCCR_AAISN_S); usbd_device_event_irq(udc_device, DEVICE_CONFIGURED, 0); writel(UDCISR1_IRCC, UDCISR1); diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 87a59704db..98f2a104b7 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -43,6 +43,7 @@ COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o else COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o endif +COBJS-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o COBJS-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c new file mode 100644 index 0000000000..86add36ce1 --- /dev/null +++ b/drivers/usb/host/ehci-faraday.c @@ -0,0 +1,148 @@ +/* + * Faraday USB 2.0 EHCI Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#include <common.h> +#include <asm/io.h> +#include <usb.h> +#include <usb/fusbh200.h> +#include <usb/fotg210.h> + +#include "ehci.h" + +#ifndef CONFIG_USB_EHCI_BASE_LIST +#define CONFIG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE } +#endif + +union ehci_faraday_regs { + struct fusbh200_regs usb; + struct fotg210_regs otg; +}; + +static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs) +{ + return !readl(®s->usb.easstr); +} + +/* + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr, + struct ehci_hcor **ret_hcor) +{ + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + union ehci_faraday_regs *regs; + uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST; + + if (index < 0 || index >= ARRAY_SIZE(base_list)) + return -1; + regs = (void __iomem *)base_list[index]; + hccr = (struct ehci_hccr *)®s->usb.hccr; + hcor = (struct ehci_hcor *)®s->usb.hcor; + + if (ehci_is_fotg2xx(regs)) { + /* A-device bus reset */ + /* ... Power off A-device */ + setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); + /* ... Drop vbus and bus traffic */ + clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); + mdelay(1); + /* ... Power on A-device */ + clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP); + /* ... Drive vbus and bus traffic */ + setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ); + mdelay(1); + /* Disable OTG & DEV interrupts, triggered at level-high */ + writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr); + /* Clear all interrupt status */ + writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr); + } else { + /* Interrupt=level-high */ + setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH); + /* VBUS on */ + clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF); + /* Disable all interrupts */ + writel(0x00, ®s->usb.bmier); + writel(0x1f, ®s->usb.bmisr); + } + + *ret_hccr = hccr; + *ret_hcor = hcor; + + return 0; +} + +/* + * Destroy the appropriate control structures corresponding + * the the EHCI host controller. + */ +int ehci_hcd_stop(int index) +{ + return 0; +} + +/* + * This ehci_set_usbmode() overrides the weak function + * in "ehci-hcd.c". + */ +void ehci_set_usbmode(int index) +{ + /* nothing needs to be done */ +} + +/* + * This ehci_get_port_speed() overrides the weak function + * in "ehci-hcd.c". + */ +int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) +{ + int spd, ret = PORTSC_PSPD_HS; + union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10); + + if (ehci_is_fotg2xx(regs)) + spd = OTGCSR_SPD(readl(®s->otg.otgcsr)); + else + spd = BMCSR_SPD(readl(®s->usb.bmcsr)); + + switch (spd) { + case 0: /* full speed */ + ret = PORTSC_PSPD_FS; + break; + case 1: /* low speed */ + ret = PORTSC_PSPD_LS; + break; + case 2: /* high speed */ + ret = PORTSC_PSPD_HS; + break; + default: + printf("ehci-faraday: invalid device speed\n"); + break; + } + + return ret; +} + +/* + * This ehci_get_portsc_register() overrides the weak function + * in "ehci-hcd.c". + */ +uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port) +{ + /* Faraday EHCI has one and only one portsc register */ + if (port) { + /* Printing the message would cause a scan failure! */ + debug("The request port(%d) is not configured\n", port); + return NULL; + } + + /* Faraday EHCI PORTSC register offset is 0x20 from hcor */ + return (uint32_t *)((uint8_t *)hcor + 0x20); +} diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index e0f3e4b6c7..706cf0cb7d 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -589,10 +589,12 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token); } else { dev->act_len = 0; +#ifndef CONFIG_USB_EHCI_FARADAY debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts), ehci_readl(&ctrl->hcor->or_portsc[0]), ehci_readl(&ctrl->hcor->or_portsc[1])); +#endif } free(qtd); @@ -603,6 +605,17 @@ fail: return -1; } +__weak uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port) +{ + if (port < 0 || port >= CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { + /* Printing the message would cause a scan failure! */ + debug("The request port(%u) is not configured\n", port); + return NULL; + } + + return (uint32_t *)&hcor->or_portsc[port]; +} + int ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) @@ -616,11 +629,6 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int port = le16_to_cpu(req->index) & 0xff; struct ehci_ctrl *ctrl = dev->controller; - if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { - printf("The request port(%d) is not configured\n", port - 1); - return -1; - } - status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1]; srclen = 0; debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", @@ -631,6 +639,19 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, typeReq = req->request | req->requesttype << 8; switch (typeReq) { + case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): + case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): + case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): + status_reg = ehci_get_portsc_register(ctrl->hcor, port - 1); + if (!status_reg) + return -1; + break; + default: + status_reg = NULL; + break; + } + + switch (typeReq) { case DeviceRequest | USB_REQ_GET_DESCRIPTOR: switch (le16_to_cpu(req->value) >> 8) { case USB_DT_DEVICE: @@ -809,21 +830,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, break; case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): reg = ehci_readl(status_reg); + reg &= ~EHCI_PS_CLEAR; switch (le16_to_cpu(req->value)) { case USB_PORT_FEAT_ENABLE: reg &= ~EHCI_PS_PE; break; case USB_PORT_FEAT_C_ENABLE: - reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE; + reg |= EHCI_PS_PE; break; case USB_PORT_FEAT_POWER: if (HCS_PPC(ehci_readl(&ctrl->hccr->cr_hcsparams))) - reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP); + reg &= ~EHCI_PS_PP; + break; case USB_PORT_FEAT_C_CONNECTION: - reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC; + reg |= EHCI_PS_CSC; break; case USB_PORT_FEAT_OVER_CURRENT: - reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC; + reg |= EHCI_PS_OCC; break; case USB_PORT_FEAT_C_RESET: ctrl->portreset &= ~(1 << port); @@ -903,6 +926,9 @@ int usb_lowlevel_init(int index, void **controller) qh_list->qh_overlay.qt_token = cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED)); + flush_dcache_range((uint32_t)qh_list, + ALIGN_END_ADDR(struct QH, qh_list, 1)); + /* Set async. queue head pointer. */ ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list); @@ -916,6 +942,9 @@ int usb_lowlevel_init(int index, void **controller) periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + flush_dcache_range((uint32_t)periodic, + ALIGN_END_ADDR(struct QH, periodic, 1)); + /* * Step 2: Setup frame-list: Every microframe, USB tries the same list. * In particular, device specifications on polling frequency @@ -933,6 +962,10 @@ int usb_lowlevel_init(int index, void **controller) | QH_LINK_TYPE_QH; } + flush_dcache_range((uint32_t)ehcic[index].periodic_list, + ALIGN_END_ADDR(uint32_t, ehcic[index].periodic_list, + 1024)); + /* Set periodic list base address */ ehci_writel(&ehcic[index].hcor->or_periodiclistbase, (uint32_t)ehcic[index].periodic_list); @@ -959,10 +992,13 @@ int usb_lowlevel_init(int index, void **controller) cmd |= CMD_RUN; ehci_writel(&ehcic[index].hcor->or_usbcmd, cmd); +#ifndef CONFIG_USB_EHCI_FARADAY /* take control over the ports */ cmd = ehci_readl(&ehcic[index].hcor->or_configflag); cmd |= FLAG_CF; ehci_writel(&ehcic[index].hcor->or_configflag, cmd); +#endif + /* unblock posted write */ cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd); mdelay(5); @@ -1144,6 +1180,16 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, *buf = buffer + i * elementsize; } + flush_dcache_range((uint32_t)buffer, + ALIGN_END_ADDR(char, buffer, + queuesize * elementsize)); + flush_dcache_range((uint32_t)result->first, + ALIGN_END_ADDR(struct QH, result->first, + queuesize)); + flush_dcache_range((uint32_t)result->tds, + ALIGN_END_ADDR(struct qTD, result->tds, + queuesize)); + if (disable_periodic(ctrl) < 0) { debug("FATAL: periodic should never fail, but did"); goto fail3; @@ -1154,6 +1200,11 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, result->last->qh_link = list->qh_link; list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH; + flush_dcache_range((uint32_t)result->last, + ALIGN_END_ADDR(struct QH, result->last, 1)); + flush_dcache_range((uint32_t)list, + ALIGN_END_ADDR(struct QH, list, 1)); + if (enable_periodic(ctrl) < 0) { debug("FATAL: periodic should never fail, but did"); goto fail3; @@ -1184,6 +1235,8 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) return NULL; } /* still active */ + invalidate_dcache_range((uint32_t)cur, + ALIGN_END_ADDR(struct QH, cur, 1)); if (cur->qh_overlay.qt_token & 0x80) { debug("Exit poll_int_queue with no completed intr transfer. " "token is %x\n", cur->qh_overlay.qt_token); @@ -1290,6 +1343,9 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, return -EINVAL; } + invalidate_dcache_range((uint32_t)buffer, + ALIGN_END_ADDR(char, buffer, length)); + ret = destroy_int_queue(dev, queue); if (ret < 0) return ret; diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 15d2ec0078..c2400328a3 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -1,4 +1,5 @@ #include <common.h> +#include <watchdog.h> #include <asm/errno.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -164,6 +165,7 @@ static struct musb *gadget; int usb_gadget_handle_interrupts(void) { + WATCHDOG_RESET(); if (!gadget || !gadget->isr) return -EINVAL; diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index 60e03a4bf7..7bb91e5abf 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -1105,8 +1105,7 @@ int usb_lowlevel_init(int index, void **controller) /* Configure all the endpoint FIFO's and start usb controller */ musbr = musb_cfg.regs; - musb_configure_ep(&epinfo[0], - sizeof(epinfo) / sizeof(struct musb_epinfo)); + musb_configure_ep(&epinfo[0], ARRAY_SIZE(epinfo)); musb_start(); /* diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c index e0b4217dc3..e8a2ce0419 100644 --- a/drivers/usb/musb/musb_udc.c +++ b/drivers/usb/musb/musb_udc.c @@ -894,8 +894,7 @@ void udc_setup_ep(struct usb_device_instance *device, unsigned int id, epinfo[id * 2].epsize = endpoint->rcv_packetSize; } - musb_configure_ep(&epinfo[0], - sizeof(epinfo) / sizeof(struct musb_epinfo)); + musb_configure_ep(&epinfo[0], ARRAY_SIZE(epinfo)); } else { if (debug_level > 0) serial_printf("ERROR : %s endpoint request %d " |