diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 0cf13adc7d..89ad603d88 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -22,6 +22,37 @@ config BACKLIGHT This provides backlight uclass driver that enables basic panel backlight support. +config VIDEO_PCI_DEFAULT_FB_SIZE + hex "Default framebuffer size to use if no drivers request it" + depends on DM_VIDEO + default 0x1000000 if X86 && PCI + default 0 if !(X86 && PCI) + help + Generally, video drivers request the amount of memory they need for + the frame buffer when they are bound, by setting the size field in + struct video_uc_platdata. That memory is then reserved for use after + relocation. But PCI drivers cannot be bound before relocation unless + they are mentioned in the devicetree. + + With this value set appropriately, it is possible for PCI video + devices to have a framebuffer allocated by U-Boot. + + Note: the framebuffer needs to be large enough to store all pixels at + maximum resolution. For example, at 1920 x 1200 with 32 bits per + pixel, 2560 * 1600 * 32 / 8 = 0xfa0000 bytes are needed. + +config VIDEO_COPY + bool "Enable copying the frame buffer to a hardware copy" + depends on DM_VIDEO + help + On some machines (e.g. x86), reading from the frame buffer is very + slow because it is uncached. To improve performance, this feature + allows the frame buffer to be kept in cached memory (allocated by + U-Boot) and then copied to the hardware frame-buffer as needed. + + To use this, your video driver must set @copy_base in + struct video_uc_platdata. + config BACKLIGHT_PWM bool "Generic PWM based Backlight Driver" depends on BACKLIGHT && DM_PWM |