diff options
Diffstat (limited to 'drivers/video/sunxi/lcdc.c')
| -rw-r--r-- | drivers/video/sunxi/lcdc.c | 122 |
1 files changed, 121 insertions, 1 deletions
diff --git a/drivers/video/sunxi/lcdc.c b/drivers/video/sunxi/lcdc.c index 7d215b713e..4cb86fb7ff 100644 --- a/drivers/video/sunxi/lcdc.c +++ b/drivers/video/sunxi/lcdc.c @@ -10,6 +10,7 @@ #include <common.h> +#include <asm/arch/clock.h> #include <asm/arch/lcdc.h> #include <asm/io.h> @@ -100,7 +101,7 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc, writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) | SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v); -#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL +#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_VIDEO_DE2) writel(SUNXI_LCDC_X(mode->hsync_len.typ) | SUNXI_LCDC_Y(mode->vsync_len.typ), &lcdc->tcon0_timing_sync); @@ -207,3 +208,122 @@ void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc, SUNXI_LCDC_MUX_CTRL_SRC0(1)); #endif } + +void lcdc_pll_set(struct sunxi_ccm_reg *ccm, int tcon, int dotclock, + int *clk_div, int *clk_double, bool is_composite) +{ + int value, n, m, min_m, max_m, diff; + int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; + int best_double = 0; + bool use_mipi_pll = false; + + if (tcon == 0) { +#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_SUNXI_DE2) + min_m = 6; + max_m = 127; +#endif +#ifdef CONFIG_VIDEO_LCD_IF_LVDS + min_m = 7; + max_m = 7; +#endif + } else { + min_m = 1; + max_m = 15; + } + + /* + * Find the lowest divider resulting in a matching clock, if there + * is no match, pick the closest lower clock, as monitors tend to + * not sync to higher frequencies. + */ + for (m = min_m; m <= max_m; m++) { +#ifndef CONFIG_SUNXI_DE2 + n = (m * dotclock) / 3000; + + if ((n >= 9) && (n <= 127)) { + value = (3000 * n) / m; + diff = dotclock - value; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n = n; + best_double = 0; + } + } + + /* These are just duplicates */ + if (!(m & 1)) + continue; +#endif + + /* No double clock on DE2 */ + n = (m * dotclock) / 6000; + if ((n >= 9) && (n <= 127)) { + value = (6000 * n) / m; + diff = dotclock - value; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n = n; + best_double = 1; + } + } + } + +#ifdef CONFIG_MACH_SUN6I + /* + * Use the MIPI pll if we've been unable to find any matching setting + * for PLL3, this happens with high dotclocks because of min_m = 6. + */ + if (tcon == 0 && best_n == 0) { + use_mipi_pll = true; + best_m = 6; /* Minimum m for tcon0 */ + } + + if (use_mipi_pll) { + clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */ + clock_set_mipi_pll(best_m * dotclock * 1000); + debug("dotclock: %dkHz = %dkHz via mipi pll\n", + dotclock, clock_get_mipi_pll() / best_m / 1000); + } else +#endif + { + clock_set_pll3(best_n * 3000000); + debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n", + dotclock, + (best_double + 1) * clock_get_pll3() / best_m / 1000, + best_double + 1, best_n, best_m); + } + + if (tcon == 0) { + u32 pll; + + if (use_mipi_pll) + pll = CCM_LCD_CH0_CTRL_MIPI_PLL; + else if (best_double) + pll = CCM_LCD_CH0_CTRL_PLL3_2X; + else + pll = CCM_LCD_CH0_CTRL_PLL3; +#ifndef CONFIG_SUNXI_DE2 + writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, + &ccm->lcd0_ch0_clk_cfg); +#else + writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, + &ccm->lcd0_clk_cfg); +#endif + } +#ifndef CONFIG_SUNXI_DE2 + else { + writel(CCM_LCD_CH1_CTRL_GATE | + (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : + CCM_LCD_CH1_CTRL_PLL3) | + CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); + if (is_composite) + setbits_le32(&ccm->lcd0_ch1_clk_cfg, + CCM_LCD_CH1_CTRL_HALF_SCLK1); + } +#endif + + *clk_div = best_m; + *clk_double = best_double; +} |