diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mmc/dw_mmc.c | 27 | ||||
-rw-r--r-- | drivers/mmc/exynos_dw_mmc.c | 127 | ||||
-rw-r--r-- | drivers/mmc/mmc.c | 134 | ||||
-rw-r--r-- | drivers/mtd/spi/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/spi/gigadevice.c | 81 | ||||
-rw-r--r-- | drivers/mtd/spi/spi_flash.c | 3 | ||||
-rw-r--r-- | drivers/mtd/spi/spi_flash_internal.h | 1 | ||||
-rw-r--r-- | drivers/power/exynos-tmu.c | 123 | ||||
-rw-r--r-- | drivers/serial/serial_s5p.c | 13 | ||||
-rw-r--r-- | drivers/video/exynos_fb.c | 4 |
10 files changed, 437 insertions, 77 deletions
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 4070d4ea53..5da20eda55 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, unsigned int timeout = 100000; u32 retry = 10000; u32 mask, ctrl; + ulong start = get_timer(0); while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { - if (timeout == 0) { + if (get_timer(start) > timeout) { printf("Timeout on data busy\n"); return TIMEOUT; } - timeout--; } dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); @@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, if (data) dwmci_prepare_data(host, data); - dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); if (data) @@ -231,9 +230,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) int timeout = 10000; unsigned long sclk; - if (freq == host->clock) + if ((freq == host->clock) || (freq == 0)) return 0; - /* * If host->mmc_clk didn't define, * then assume that host->bus_hz is source clock value. @@ -314,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc) static int dwmci_init(struct mmc *mmc) { struct dwmci_host *host = (struct dwmci_host *)mmc->priv; - u32 fifo_size, fifoth_val; + u32 fifo_size; dwmci_writel(host, DWMCI_PWREN, 1); @@ -323,6 +321,9 @@ static int dwmci_init(struct mmc *mmc) return -1; } + /* Enumerate at 400KHz */ + dwmci_setup_bus(host, mmc->f_min); + dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF); dwmci_writel(host, DWMCI_INTMASK, 0); @@ -331,13 +332,13 @@ static int dwmci_init(struct mmc *mmc) dwmci_writel(host, DWMCI_IDINTEN, 0); dwmci_writel(host, DWMCI_BMOD, 1); - fifo_size = dwmci_readl(host, DWMCI_FIFOTH); - if (host->fifoth_val) - fifoth_val = host->fifoth_val; - else - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) | - TX_WMARK(fifo_size/2); - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); + if (!host->fifoth_val) { + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1; + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) | + TX_WMARK(fifo_size / 2); + } + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val); dwmci_writel(host, DWMCI_CLKENA, 0); dwmci_writel(host, DWMCI_CLKSRC, 0); diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index 72a31b73fd..4238dd933b 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -19,39 +19,146 @@ */ #include <common.h> -#include <malloc.h> #include <dwmmc.h> +#include <fdtdec.h> +#include <libfdt.h> +#include <malloc.h> #include <asm/arch/dwmmc.h> #include <asm/arch/clk.h> +#include <asm/arch/pinmux.h> -static char *EXYNOS_NAME = "EXYNOS DWMMC"; +#define DWMMC_MAX_CH_NUM 4 +#define DWMMC_MAX_FREQ 52000000 +#define DWMMC_MIN_FREQ 400000 +#define DWMMC_MMC0_CLKSEL_VAL 0x03030001 +#define DWMMC_MMC2_CLKSEL_VAL 0x03020001 +/* + * Function used as callback function to initialise the + * CLKSEL register for every mmc channel. + */ static void exynos_dwmci_clksel(struct dwmci_host *host) { - u32 val; - val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) | - DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0); + dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val); +} - dwmci_writel(host, DWMCI_CLKSEL, val); +unsigned int exynos_dwmci_get_clk(int dev_index) +{ + return get_mmc_clk(dev_index); } -int exynos_dwmci_init(u32 regbase, int bus_width, int index) +/* + * This function adds the mmc channel to be registered with mmc core. + * index - mmc channel number. + * regbase - register base address of mmc channel specified in 'index'. + * bus_width - operating bus width of mmc channel specified in 'index'. + * clksel - value to be written into CLKSEL register in case of FDT. + * NULL in case od non-FDT. + */ +int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel) { struct dwmci_host *host = NULL; + unsigned int div; + unsigned long freq, sclk; host = malloc(sizeof(struct dwmci_host)); if (!host) { printf("dwmci_host malloc fail!\n"); return 1; } + /* request mmc clock vlaue of 52MHz. */ + freq = 52000000; + sclk = get_mmc_clk(index); + div = DIV_ROUND_UP(sclk, freq); + /* set the clock divisor for mmc */ + set_mmc_clk(index, div); - host->name = EXYNOS_NAME; + host->name = "EXYNOS DWMMC"; host->ioaddr = (void *)regbase; host->buswidth = bus_width; + + if (clksel) { + host->clksel_val = clksel; + } else { + if (0 == index) + host->clksel_val = DWMMC_MMC0_CLKSEL_VAL; + if (2 == index) + host->clksel_val = DWMMC_MMC2_CLKSEL_VAL; + } + host->clksel = exynos_dwmci_clksel; host->dev_index = index; + host->mmc_clk = exynos_dwmci_get_clk; + /* Add the mmc channel to be registered with mmc core */ + if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) { + debug("dwmmc%d registration failed\n", index); + return -1; + } + return 0; +} + +#ifdef CONFIG_OF_CONTROL +int exynos_dwmmc_init(const void *blob) +{ + int index, bus_width; + int node_list[DWMMC_MAX_CH_NUM]; + int err = 0, dev_id, flag, count, i; + u32 clksel_val, base, timing[3]; + + count = fdtdec_find_aliases_for_id(blob, "mmc", + COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list, + DWMMC_MAX_CH_NUM); + + for (i = 0; i < count; i++) { + int node = node_list[i]; + + if (node <= 0) + continue; - add_dwmci(host, 52000000, 400000); + /* Extract device id for each mmc channel */ + dev_id = pinmux_decode_periph_id(blob, node); + /* Get the bus width from the device node */ + bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0); + if (bus_width <= 0) { + debug("DWMMC: Can't get bus-width\n"); + return -1; + } + if (8 == bus_width) + flag = PINMUX_FLAG_8BIT_MODE; + else + flag = PINMUX_FLAG_NONE; + + /* config pinmux for each mmc channel */ + err = exynos_pinmux_config(dev_id, flag); + if (err) { + debug("DWMMC not configured\n"); + return err; + } + + index = dev_id - PERIPH_ID_SDMMC0; + + /* Get the base address from the device node */ + base = fdtdec_get_addr(blob, node, "reg"); + if (!base) { + debug("DWMMC: Can't get base address\n"); + return -1; + } + /* Extract the timing info from the node */ + err = fdtdec_get_int_array(blob, node, "samsung,timing", + timing, 3); + if (err) { + debug("Can't get sdr-timings for divider\n"); + return -1; + } + + clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) | + DWMCI_SET_DRV_CLK(timing[1]) | + DWMCI_SET_DIV_RATIO(timing[2])); + /* Initialise each mmc channel */ + err = exynos_dwmci_add_port(index, base, bus_width, clksel_val); + if (err) + debug("dwmmc Channel-%d init failed\n", index); + } return 0; } - +#endif diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index e6a296a576..83d2df7744 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1503,3 +1503,137 @@ int mmc_initialize(bd_t *bis) do_preinit(); return 0; } + +#ifdef CONFIG_SUPPORT_EMMC_BOOT +/* + * This function changes the size of boot partition and the size of rpmb + * partition present on EMMC devices. + * + * Input Parameters: + * struct *mmc: pointer for the mmc device strcuture + * bootsize: size of boot partition + * rpmbsize: size of rpmb partition + * + * Returns 0 on success. + */ + +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, + unsigned long rpmbsize) +{ + int err; + struct mmc_cmd cmd; + + /* Only use this command for raw EMMC moviNAND. Enter backdoor mode */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = MMC_CMD62_ARG1; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error1 = %d\n", err); + return err; + } + + /* Boot partition changing mode */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = MMC_CMD62_ARG2; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error2 = %d\n", err); + return err; + } + /* boot partition size is multiple of 128KB */ + bootsize = (bootsize * 1024) / 128; + + /* Arg: boot partition size */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = bootsize; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error3 = %d\n", err); + return err; + } + /* RPMB partition size is multiple of 128KB */ + rpmbsize = (rpmbsize * 1024) / 128; + /* Arg: RPMB partition size */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = rpmbsize; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error4 = %d\n", err); + return err; + } + return 0; +} + +/* + * This function shall form and send the commands to open / close the + * boot partition specified by user. + * + * Input Parameters: + * ack: 0x0 - No boot acknowledge sent (default) + * 0x1 - Boot acknowledge sent during boot operation + * part_num: User selects boot data that will be sent to master + * 0x0 - Device not boot enabled (default) + * 0x1 - Boot partition 1 enabled for boot + * 0x2 - Boot partition 2 enabled for boot + * access: User selects partitions to access + * 0x0 : No access to boot partition (default) + * 0x1 : R/W boot partition 1 + * 0x2 : R/W boot partition 2 + * 0x3 : R/W Replay Protected Memory Block (RPMB) + * + * Returns 0 on success. + */ +int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +{ + int err; + struct mmc_cmd cmd; + + /* Boot ack enable, boot partition enable , boot partition access */ + cmd.cmdidx = MMC_CMD_SWITCH; + cmd.resp_type = MMC_RSP_R1b; + + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_PART_CONF << 16) | + ((EXT_CSD_BOOT_ACK(ack) | + EXT_CSD_BOOT_PART_NUM(part_num) | + EXT_CSD_PARTITION_ACCESS(access)) << 8); + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + if (access) { + debug("mmc boot partition#%d open fail:Error1 = %d\n", + part_num, err); + } else { + debug("mmc boot partition#%d close fail:Error = %d\n", + part_num, err); + } + return err; + } + + if (access) { + /* 4bit transfer mode at booting time. */ + cmd.cmdidx = MMC_CMD_SWITCH; + cmd.resp_type = MMC_RSP_R1b; + + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | + (EXT_CSD_BOOT_BUS_WIDTH << 16) | + ((1 << 0) << 8); + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc boot partition#%d open fail:Error2 = %d\n", + part_num, err); + return err; + } + } + return 0; +} +#endif diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 90f83924e2..ecbb2108fb 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -32,6 +32,7 @@ endif COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o +COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE) += gigadevice.o COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c new file mode 100644 index 0000000000..b5e1ebedf8 --- /dev/null +++ b/drivers/mtd/spi/gigadevice.c @@ -0,0 +1,81 @@ +/* + * Gigadevice SPI flash driver + * Copyright 2013, Samsung Electronics Co., Ltd. + * Author: Banajit Goswami <banajit.g@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <spi_flash.h> + +#include "spi_flash_internal.h" + +struct gigadevice_spi_flash_params { + uint16_t id; + uint16_t nr_blocks; + const char *name; +}; + +static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = { + { + .id = 0x6016, + .nr_blocks = 64, + .name = "GD25LQ", + }, + { + .id = 0x4017, + .nr_blocks = 128, + .name = "GD25Q64B", + }, +}; + +struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode) +{ + const struct gigadevice_spi_flash_params *params; + struct spi_flash *flash; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) { + params = &gigadevice_spi_flash_table[i]; + if (params->id == ((idcode[1] << 8) | idcode[2])) + break; + } + + if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) { + debug("SF: Unsupported Gigadevice ID %02x%02x\n", + idcode[1], idcode[2]); + return NULL; + } + + flash = spi_flash_alloc_base(spi, params->name); + if (!flash) { + debug("SF: Failed to allocate memory\n"); + return NULL; + } + /* page_size */ + flash->page_size = 256; + /* sector_size = page_size * pages_per_sector */ + flash->sector_size = flash->page_size * 16; + /* size = sector_size * sector_per_block * number of blocks */ + flash->size = flash->sector_size * 16 * params->nr_blocks; + + return flash; +} diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 0e38f59481..9991d47a46 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -342,6 +342,9 @@ static const struct { #ifdef CONFIG_SPI_FLASH_EON { 0, 0x1c, spi_flash_probe_eon, }, #endif +#ifdef CONFIG_SPI_FLASH_GIGADEVICE + { 0, 0xc8, spi_flash_probe_gigadevice, }, +#endif #ifdef CONFIG_SPI_FLASH_MACRONIX { 0, 0xc2, spi_flash_probe_macronix, }, #endif diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index 141cfa8b26..e0afbc3d87 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -106,3 +106,4 @@ struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode); diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c index d4b3e65a3e..9a093a5bdd 100644 --- a/drivers/power/exynos-tmu.c +++ b/drivers/power/exynos-tmu.c @@ -50,15 +50,15 @@ /* Tmeperature threshold values for various thermal events */ struct temperature_params { /* minimum value in temperature code range */ - unsigned int min_val; + unsigned min_val; /* maximum value in temperature code range */ - unsigned int max_val; + unsigned max_val; /* temperature threshold to start warning */ - unsigned int start_warning; + unsigned start_warning; /* temperature threshold CPU tripping */ - unsigned int start_tripping; + unsigned start_tripping; /* temperature threshold for HW tripping */ - unsigned int hardware_tripping; + unsigned hardware_tripping; }; /* Pre-defined values and thresholds for calibration of current temperature */ @@ -66,25 +66,27 @@ struct tmu_data { /* pre-defined temperature thresholds */ struct temperature_params ts; /* pre-defined efuse range minimum value */ - unsigned int efuse_min_value; + unsigned efuse_min_value; /* pre-defined efuse value for temperature calibration */ - unsigned int efuse_value; + unsigned efuse_value; /* pre-defined efuse range maximum value */ - unsigned int efuse_max_value; + unsigned efuse_max_value; /* current temperature sensing slope */ - unsigned int slope; + unsigned slope; }; /* TMU device specific details and status */ struct tmu_info { /* base Address for the TMU */ - unsigned tmu_base; + struct exynos5_tmu_reg *tmu_base; + /* mux Address for the TMU */ + int tmu_mux; /* pre-defined values for calibration and thresholds */ struct tmu_data data; /* value required for triminfo_25 calibration */ - unsigned int te1; + unsigned te1; /* value required for triminfo_85 calibration */ - unsigned int te2; + unsigned te2; /* Value for measured data calibration */ int dc_value; /* enum value indicating status of the TMU */ @@ -103,17 +105,24 @@ static struct tmu_info gbl_info; */ static int get_cur_temp(struct tmu_info *info) { - int cur_temp; - struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base; + struct exynos5_tmu_reg *reg = info->tmu_base; + ulong start; + int cur_temp = 0; /* * Temperature code range between min 25 and max 125. * May run more than once for first call as initial sensing * has not yet happened. */ - do { - cur_temp = readl(®->current_temp) & 0xff; - } while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL); + if (info->tmu_state == TMU_STATUS_NORMAL) { + start = get_timer(0); + do { + cur_temp = readl(®->current_temp) & 0xff; + } while ((cur_temp == 0) || (get_timer(start) > 100)); + } + + if (cur_temp == 0) + return cur_temp; /* Calibrate current temperature */ cur_temp = cur_temp - info->te1 + info->dc_value; @@ -137,23 +146,29 @@ enum tmu_status_t tmu_monitor(int *temp) /* Read current temperature of the SOC */ cur_temp = get_cur_temp(&gbl_info); + + if (!cur_temp) + goto out; + *temp = cur_temp; /* Temperature code lies between min 25 and max 125 */ - if (cur_temp >= data->ts.start_tripping && - cur_temp <= data->ts.max_val) { + if ((cur_temp >= data->ts.start_tripping) && + (cur_temp <= data->ts.max_val)) return TMU_STATUS_TRIPPED; - } else if (cur_temp >= data->ts.start_warning) { + + if (cur_temp >= data->ts.start_warning) return TMU_STATUS_WARNING; - } else if (cur_temp < data->ts.start_warning && - cur_temp >= data->ts.min_val) { + + if ((cur_temp < data->ts.start_warning) && + (cur_temp >= data->ts.min_val)) return TMU_STATUS_NORMAL; - } else { - /* Temperature code does not lie between min 25 and max 125 */ - gbl_info.tmu_state = TMU_STATUS_INIT; - debug("EXYNOS_TMU: Thermal reading failed\n"); - return TMU_STATUS_INIT; - } + + out: + /* Temperature code does not lie between min 25 and max 125 */ + gbl_info.tmu_state = TMU_STATUS_INIT; + debug("EXYNOS_TMU: Thermal reading failed\n"); + return TMU_STATUS_INIT; } /* @@ -166,6 +181,7 @@ enum tmu_status_t tmu_monitor(int *temp) static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) { #ifdef CONFIG_OF_CONTROL + fdt_addr_t addr; int node; int error = 0; @@ -183,46 +199,58 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) * miscalculation of register values in tmu_setup_parameters * may result in misleading current temperature. */ - info->tmu_base = fdtdec_get_addr(blob, node, "reg"); - if (info->tmu_base == FDT_ADDR_T_NONE) { + addr = fdtdec_get_addr(blob, node, "reg"); + if (addr == FDT_ADDR_T_NONE) { debug("%s: Missing tmu-base\n", __func__); return -1; } + info->tmu_base = (struct exynos5_tmu_reg *)addr; + + /* Optional field. */ + info->tmu_mux = fdtdec_get_int(blob, + node, "samsung,mux", -1); + /* Take default value as per the user manual b(110) */ + if (info->tmu_mux == -1) + info->tmu_mux = 0x6; + info->data.ts.min_val = fdtdec_get_int(blob, node, "samsung,min-temp", -1); - error |= info->data.ts.min_val; + error |= (info->data.ts.min_val == -1); info->data.ts.max_val = fdtdec_get_int(blob, node, "samsung,max-temp", -1); - error |= info->data.ts.max_val; + error |= (info->data.ts.max_val == -1); info->data.ts.start_warning = fdtdec_get_int(blob, node, "samsung,start-warning", -1); - error |= info->data.ts.start_warning; + error |= (info->data.ts.start_warning == -1); info->data.ts.start_tripping = fdtdec_get_int(blob, node, "samsung,start-tripping", -1); - error |= info->data.ts.start_tripping; + error |= (info->data.ts.start_tripping == -1); info->data.ts.hardware_tripping = fdtdec_get_int(blob, node, "samsung,hw-tripping", -1); - error |= info->data.ts.hardware_tripping; + error |= (info->data.ts.hardware_tripping == -1); info->data.efuse_min_value = fdtdec_get_int(blob, node, "samsung,efuse-min-value", -1); - error |= info->data.efuse_min_value; + error |= (info->data.efuse_min_value == -1); info->data.efuse_value = fdtdec_get_int(blob, node, "samsung,efuse-value", -1); - error |= info->data.efuse_value; + error |= (info->data.efuse_value == -1); info->data.efuse_max_value = fdtdec_get_int(blob, node, "samsung,efuse-max-value", -1); - error |= info->data.efuse_max_value; + error |= (info->data.efuse_max_value == -1); info->data.slope = fdtdec_get_int(blob, node, "samsung,slope", -1); - error |= info->data.slope; + error |= (info->data.slope == -1); info->dc_value = fdtdec_get_int(blob, node, "samsung,dc-value", -1); - error |= info->dc_value; + error |= (info->dc_value == -1); - if (error == -1) { + if (error) { debug("fail to get tmu node properties\n"); return -1; } +#else + /* Non DT support may never be added. Just in case */ + return -1; #endif return 0; @@ -236,12 +264,12 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob) */ static void tmu_setup_parameters(struct tmu_info *info) { - unsigned int te_code, con; - unsigned int warning_code, trip_code, hwtrip_code; - unsigned int cooling_temp; - unsigned int rising_value; + unsigned te_code, con; + unsigned warning_code, trip_code, hwtrip_code; + unsigned cooling_temp; + unsigned rising_value; struct tmu_data *data = &info->data; - struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base; + struct exynos5_tmu_reg *reg = info->tmu_base; /* Must reload for reading efuse value from triminfo register */ writel(TRIMINFO_RELOAD, ®->triminfo_control); @@ -288,7 +316,7 @@ static void tmu_setup_parameters(struct tmu_info *info) /* TMU core enable */ con = readl(®->tmu_control); - con |= THERM_TRIP_EN | CORE_EN; + con |= THERM_TRIP_EN | CORE_EN | (info->tmu_mux << 20); writel(con, ®->tmu_control); @@ -314,6 +342,5 @@ int tmu_init(const void *blob) tmu_setup_parameters(&gbl_info); gbl_info.tmu_state = TMU_STATUS_NORMAL; ret: - return gbl_info.tmu_state; } diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index 3c41242a8e..e65125ccd7 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -30,6 +30,10 @@ DECLARE_GLOBAL_DATA_PTR; +#define RX_FIFO_COUNT_MASK 0xff +#define RX_FIFO_FULL_MASK (1 << 8) +#define TX_FIFO_FULL_MASK (1 << 24) + static inline struct s5p_uart *s5p_get_base_uart(int dev_index) { u32 offset = dev_index * sizeof(struct s5p_uart); @@ -87,8 +91,8 @@ int serial_init_dev(const int dev_index) { struct s5p_uart *const uart = s5p_get_base_uart(dev_index); - /* reset and enable FIFOs, set triggers to the maximum */ - writel(0, &uart->ufcon); + /* enable FIFOs */ + writel(0x1, &uart->ufcon); writel(0, &uart->umcon); /* 8N1 */ writel(0x3, &uart->ulcon); @@ -130,7 +134,8 @@ int serial_getc_dev(const int dev_index) struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* wait for character to arrive */ - while (!(readl(&uart->utrstat) & 0x1)) { + while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | + RX_FIFO_FULL_MASK))) { if (serial_err_check(dev_index, 0)) return 0; } @@ -146,7 +151,7 @@ void serial_putc_dev(const char c, const int dev_index) struct s5p_uart *const uart = s5p_get_base_uart(dev_index); /* wait for room in the tx FIFO */ - while (!(readl(&uart->utrstat) & 0x2)) { + while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) { if (serial_err_check(dev_index, 1)) return; } diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index ed0823bf97..c3606d5b02 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -319,10 +319,10 @@ void lcd_ctrl_init(void *lcdbase) #ifdef CONFIG_OF_CONTROL if (exynos_fimd_parse_dt(gd->fdt_blob)) debug("Can't get proper panel info\n"); -#endif +#else /* initialize parameters which is specific to panel. */ init_panel_info(&panel_info); - +#endif panel_width = panel_info.vl_width; panel_height = panel_info.vl_height; |