diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/usb/common/fsl-errata.c | 26 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-fsl.c | 13 |
2 files changed, 39 insertions, 0 deletions
diff --git a/drivers/usb/common/fsl-errata.c b/drivers/usb/common/fsl-errata.c index 183bf2ba42..f2bffba35e 100644 --- a/drivers/usb/common/fsl-errata.c +++ b/drivers/usb/common/fsl-errata.c @@ -190,4 +190,30 @@ bool has_erratum_a008751(void) return false; } +bool has_erratum_a010151(void) +{ + u32 svr = get_svr(); + u32 soc = SVR_SOC_VER(svr); + + switch (soc) { +#ifdef CONFIG_ARM64 + case SVR_LS2080A: + case SVR_LS2085A: + case SVR_LS1046A: + case SVR_LS1012A: + return IS_SVR_REV(svr, 1, 0); + case SVR_LS1043A: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1); +#endif +#ifdef CONFIG_LS102XA + case SOC_VER_LS1020: + case SOC_VER_LS1021: + case SOC_VER_LS1022: + case SOC_VER_SLS1020: + return IS_SVR_REV(svr, 2, 0); +#endif + } + return false; +} + #endif diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c index 2529d0eb13..798c358fd9 100644 --- a/drivers/usb/host/xhci-fsl.c +++ b/drivers/usb/host/xhci-fsl.c @@ -84,6 +84,19 @@ static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci) /* Change beat burst and outstanding pipelined transfers requests */ fsl_xhci_set_beat_burst_length(fsl_xhci->dwc3_reg); + /* + * A-010151: The dwc3 phy TSMC 28-nm HPM 0.9/1.8 V does not + * reliably support Rx Detect in P3 mode(P3 is the default + * setting). Therefore, some USB3.0 devices may not be detected + * reliably in Super Speed mode. So, USB controller to configure + * USB in P2 mode whenever the Receive Detect feature is required. + * whenever the Receive Detect feature is required. + */ + if (has_erratum_a010151()) + clrsetbits_le32(&fsl_xhci->dwc3_reg->g_usb3pipectl[0], + DWC3_GUSB3PIPECTL_DISRXDETP3, + DWC3_GUSB3PIPECTL_DISRXDETP3); + return ret; } |