diff options
Diffstat (limited to 'drivers')
41 files changed, 1199 insertions, 427 deletions
diff --git a/drivers/dma/keystone_nav.c b/drivers/dma/keystone_nav.c index 77707c2109..dfca75abdc 100644 --- a/drivers/dma/keystone_nav.c +++ b/drivers/dma/keystone_nav.c @@ -81,9 +81,6 @@ void qm_close(void) { u32 j; - if (qm_cfg == NULL) - return; - queue_close(qm_cfg->qpool_num); qm_cfg->mngr_cfg->link_ram_base0 = 0; @@ -105,9 +102,6 @@ void qm_push(struct qm_host_desc *hd, u32 qnum) { u32 regd; - if (!qm_cfg) - return; - cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4); regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1); writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh); @@ -127,9 +121,6 @@ struct qm_host_desc *qm_pop(u32 qnum) { u32 uhd; - if (!qm_cfg) - return NULL; - uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf; if (uhd) cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4); @@ -139,9 +130,6 @@ struct qm_host_desc *qm_pop(u32 qnum) struct qm_host_desc *qm_pop_from_free_pool(void) { - if (!qm_cfg) - return NULL; - return qm_pop(qm_cfg->qpool_num); } diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 0c50a8f332..44135e5bb7 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -11,9 +11,25 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> #include <asm/io.h> #include <asm/gpio.h> +#include <dm/device-internal.h> +DECLARE_GLOBAL_DATA_PTR; + +#define SUNXI_GPIOS_PER_BANK SUNXI_GPIO_A_NR + +struct sunxi_gpio_platdata { + struct sunxi_gpio *regs; + const char *bank_name; /* Name of bank, e.g. "B" */ + int gpio_count; +}; + +#ifndef CONFIG_DM_GPIO static int sunxi_gpio_output(u32 pin, u32 val) { u32 dat; @@ -100,3 +116,157 @@ int sunxi_name_to_gpio(const char *name) return -1; return group * 32 + pin; } +#endif + +#ifdef CONFIG_DM_GPIO +static int sunxi_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + + sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_INPUT); + + return 0; +} + +static int sunxi_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + + sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_OUTPUT); + clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); + + return 0; +} + +static int sunxi_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + unsigned dat; + + dat = readl(&plat->regs->dat); + dat >>= num; + + return dat & 0x1; +} + +static int sunxi_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + + clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); + return 0; +} + +static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + int func; + + func = sunxi_gpio_get_cfgbank(plat->regs, offset); + if (func == SUNXI_GPIO_OUTPUT) + return GPIOF_OUTPUT; + else if (func == SUNXI_GPIO_INPUT) + return GPIOF_INPUT; + else + return GPIOF_FUNC; +} + +static const struct dm_gpio_ops gpio_sunxi_ops = { + .direction_input = sunxi_gpio_direction_input, + .direction_output = sunxi_gpio_direction_output, + .get_value = sunxi_gpio_get_value, + .set_value = sunxi_gpio_set_value, + .get_function = sunxi_gpio_get_function, +}; + +/** + * Returns the name of a GPIO bank + * + * GPIO banks are named A, B, C, ... + * + * @bank: Bank number (0, 1..n-1) + * @return allocated string containing the name + */ +static char *gpio_bank_name(int bank) +{ + char *name; + + name = malloc(2); + if (name) { + name[0] = 'A' + bank; + name[1] = '\0'; + } + + return name; +} + +static int gpio_sunxi_probe(struct udevice *dev) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + /* Tell the uclass how many GPIOs we have */ + if (plat) { + uc_priv->gpio_count = plat->gpio_count; + uc_priv->bank_name = plat->bank_name; + } + + return 0; +} +/** + * We have a top-level GPIO device with no actual GPIOs. It has a child + * device for each Sunxi bank. + */ +static int gpio_sunxi_bind(struct udevice *parent) +{ + struct sunxi_gpio_platdata *plat = parent->platdata; + struct sunxi_gpio_reg *ctlr; + int bank; + int ret; + + /* If this is a child device, there is nothing to do here */ + if (plat) + return 0; + + ctlr = (struct sunxi_gpio_reg *)fdtdec_get_addr(gd->fdt_blob, + parent->of_offset, "reg"); + for (bank = 0; bank < SUNXI_GPIO_BANKS; bank++) { + struct sunxi_gpio_platdata *plat; + struct udevice *dev; + + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + plat->regs = &ctlr->gpio_bank[bank]; + plat->bank_name = gpio_bank_name(bank); + plat->gpio_count = SUNXI_GPIOS_PER_BANK; + + ret = device_bind(parent, parent->driver, + plat->bank_name, plat, -1, &dev); + if (ret) + return ret; + dev->of_offset = parent->of_offset; + } + + return 0; +} + +static const struct udevice_id sunxi_gpio_ids[] = { + { .compatible = "allwinner,sun7i-a20-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(gpio_sunxi) = { + .name = "gpio_sunxi", + .id = UCLASS_GPIO, + .ops = &gpio_sunxi_ops, + .of_match = sunxi_gpio_ids, + .bind = gpio_sunxi_bind, + .probe = gpio_sunxi_probe, +}; +#endif diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 811033b0b8..7bb1702bba 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -38,7 +38,7 @@ * generic value. */ #ifndef CONFIG_I2C_TIMEOUT -#define CONFIG_I2C_TIMEOUT 10000 +#define CONFIG_I2C_TIMEOUT 100000 #endif #define I2C_READ_BIT 1 diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index 18d6736601..d34b749a56 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -229,11 +229,9 @@ static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr) } /* implement possible board specific board init */ -static void __def_i2c_init_board(void) +__weak void i2c_init_board(void) { } -void i2c_init_board(void) - __attribute__((weak, alias("__def_i2c_init_board"))); /* * i2c_init_all(): @@ -395,9 +393,7 @@ void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val) i2c_write(addr, reg, 1, &val, 1); } -void __i2c_init(int speed, int slaveaddr) +__weak void i2c_init(int speed, int slaveaddr) { i2c_init_bus(i2c_get_bus_num(), speed, slaveaddr); } -void i2c_init(int speed, int slaveaddr) - __attribute__((weak, alias("__i2c_init"))); diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c index e7a15ba644..df8888550b 100644 --- a/drivers/i2c/ppc4xx_i2c.c +++ b/drivers/i2c/ppc4xx_i2c.c @@ -158,8 +158,7 @@ static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) * * Typical case is a Write of an addr followd by a Read. The * IBM FAQ does not cover this. On the last byte of the write - * we don't set the creg CHT bit, and on the first bytes of the - * read we set the RPST bit. + * we don't set the creg CHT bit but the RPST bit. * * It does not support address only transfers, there must be * a data part. If you want to write the address yourself, put @@ -247,6 +246,10 @@ static int _i2c_transfer(struct i2c_adapter *adap, if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt)) creg |= IIC_CNTL_CHT; + /* last part of address, prepare for repeated start on read */ + if (cmd_type && (ptr == addr) && ((tran + bc) == cnt)) + creg |= IIC_CNTL_RPST; + if (reading) { creg |= IIC_CNTL_READ; } else { @@ -286,6 +289,27 @@ static int _i2c_transfer(struct i2c_adapter *adap, /* Transfer aborted? */ if (status & IIC_EXTSTS_XFRA) result = IIC_NOK_XFRA; + /* Is bus free? + * If error happened during combined xfer + * IIC interface is usually stuck in some strange + * state without a valid stop condition. + * Brute, but working: generate stop, then soft reset. + */ + if ((status & IIC_EXTSTS_BCS_MASK) + != IIC_EXTSTS_BCS_FREE){ + u8 mdcntl = in_8(&i2c->mdcntl); + + /* Generate valid stop condition */ + out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST); + out_8(&i2c->directcntl, IIC_DIRCNTL_SCC); + udelay(10); + out_8(&i2c->directcntl, + IIC_DIRCNTL_SCC | IIC_DIRCNTL_SDAC); + out_8(&i2c->xtcntlss, 0); + + ppc4xx_i2c_init(adap, (mdcntl & IIC_MDCNTL_FSM) + ? 400000 : 100000, 0); + } } else if ( status & IIC_STS_PT) { result = IIC_NOK_TOUT; } @@ -314,8 +338,6 @@ static int _i2c_transfer(struct i2c_adapter *adap, cnt = data_len; tran = 0; reading = cmd_type; - if (reading) - creg = IIC_CNTL_RPST; } } return result; diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c index 50cebd622b..90ad116a98 100644 --- a/drivers/i2c/rcar_i2c.c +++ b/drivers/i2c/rcar_i2c.c @@ -119,10 +119,10 @@ rcar_i2c_raw_read(struct rcar_i2c *dev, u8 chip, uint addr) /* set slave address, receive */ writel((chip << 1) | 1, &dev->icmar); - /* clear status */ - writel(0, &dev->icmsr); /* start master receive */ writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr); + /* clear status */ + writel(0, &dev->icmsr); while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDR)) != (MSR_MAT | MSR_MDR)) diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 464cee16d1..461d7d8ec1 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -5,37 +5,39 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o +obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o +obj-$(CONFIG_DWMMC) += dw_mmc.o +obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o obj-$(CONFIG_GENERIC_MMC) += mmc.o obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o +obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o -obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o +obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_MV_SDHCI) += mv_sdhci.o +obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o obj-$(CONFIG_MXC_MMC) += mxcmmc.o obj-$(CONFIG_MXS_MMC) += mxsmmc.o obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o -obj-$(CONFIG_SDHCI) += sdhci.o -obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o -obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o +obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o obj-$(CONFIG_S3C_SDI) += s3c_sdi.o obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o +obj-$(CONFIG_SDHCI) += sdhci.o obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o +obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o -obj-$(CONFIG_DWMMC) += dw_mmc.o -obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o -obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o -obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o -obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o else obj-$(CONFIG_GENERIC_MMC) += mmc_write.o endif -obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o + diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index ef2cbf9e2f..ffb5284a00 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -611,7 +611,8 @@ static int omap_hsmmc_getcd(struct mmc *mmc) if (cd_gpio < 0) return 1; - return gpio_get_value(cd_gpio); + /* NOTE: assumes card detect signal is active-low */ + return !gpio_get_value(cd_gpio); } static int omap_hsmmc_getwp(struct mmc *mmc) @@ -624,6 +625,7 @@ static int omap_hsmmc_getwp(struct mmc *mmc) if (wp_gpio < 0) return 0; + /* NOTE: assumes write protect signal is active-high */ return gpio_get_value(wp_gpio); } #endif diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 16592e3d7c..231f0a0315 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -30,10 +30,22 @@ struct sunxi_mmc_host { /* support 4 mmc hosts */ struct sunxi_mmc_host mmc_host[4]; +static int sunxi_mmc_getcd_gpio(int sdc_no) +{ + switch (sdc_no) { + case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); + case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); + case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); + case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); + } + return -1; +} + static int mmc_resource_init(int sdc_no) { struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int cd_pin, ret = 0; debug("init mmc %d resource\n", sdc_no); @@ -60,7 +72,11 @@ static int mmc_resource_init(int sdc_no) } mmchost->mmc_no = sdc_no; - return 0; + cd_pin = sunxi_mmc_getcd_gpio(sdc_no); + if (cd_pin != -1) + ret = gpio_request(cd_pin, "mmc_cd"); + + return ret; } static int mmc_clk_io_on(int sdc_no) @@ -75,7 +91,7 @@ static int mmc_clk_io_on(int sdc_no) /* config ahb clock */ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) /* unassert reset */ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no)); #endif @@ -351,15 +367,9 @@ out: static int sunxi_mmc_getcd(struct mmc *mmc) { struct sunxi_mmc_host *mmchost = mmc->priv; - int cd_pin = -1; - - switch (mmchost->mmc_no) { - case 0: cd_pin = sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); break; - case 1: cd_pin = sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); break; - case 2: cd_pin = sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); break; - case 3: cd_pin = sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); break; - } + int cd_pin; + cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no); if (cd_pin == -1) return 1; @@ -385,7 +395,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; cfg->host_caps = MMC_MODE_4BIT; cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || defined(CONFIG_MACH_SUN8I) cfg->host_caps |= MMC_MODE_HC; #endif cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; @@ -393,7 +403,9 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->f_min = 400000; cfg->f_max = 52000000; - mmc_resource_init(sdc_no); + if (mmc_resource_init(sdc_no) != 0) + return NULL; + mmc_clk_io_on(sdc_no); return mmc_create(cfg, &mmc_host[sdc_no]); diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 036c113ad3..7a064ab1bf 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -146,8 +146,13 @@ static uint32_t mxs_nand_aux_status_offset(void) static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size, uint32_t page_oob_size) { - if (page_data_size == 2048) - return 8; + if (page_data_size == 2048) { + if (page_oob_size == 64) + return 8; + + if (page_oob_size == 112) + return 14; + } if (page_data_size == 4096) { if (page_oob_size == 128) diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index c8681d0223..bedab1d606 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -315,7 +315,7 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); -#ifdef CONFIG_K2E_EVM +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) /* Map RX packet flow priority to 0 */ writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP); #endif @@ -400,6 +400,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) keystone2_net_serdes_setup(); + if (sys_has_mdio) + keystone2_mdio_reset(mdio_bus); + keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1, eth_priv->sgmii_link_type); @@ -582,7 +585,7 @@ static void keystone2_net_serdes_setup(void) &ks2_serdes_sgmii_156p25mhz, CONFIG_KSNET_SERDES_LANES_PER_SGMII); -#ifdef CONFIG_SOC_K2E +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE, &ks2_serdes_sgmii_156p25mhz, CONFIG_KSNET_SERDES_LANES_PER_SGMII); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index d2ecadc890..9437c3bbcc 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -276,6 +276,57 @@ static int m88e1111s_config(struct phy_device *phydev) return 0; } +/** + * m88e1518_phy_writebits - write bits to a register + */ +void m88e1518_phy_writebits(struct phy_device *phydev, + u8 reg_num, u16 offset, u16 len, u16 data) +{ + u16 reg, mask; + + if ((len + offset) >= 16) + mask = 0 - (1 << offset); + else + mask = (1 << (len + offset)) - (1 << offset); + + reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num); + + reg &= ~mask; + reg |= data << offset; + + phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg); +} + +static int m88e1518_config(struct phy_device *phydev) +{ + /* + * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512 + * /88E1514 Rev A0, Errata Section 3.1 + */ + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); /* page 0xff */ + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); /* reg page 0 */ + phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); /* reg page 18 */ + /* Write HWCFG_MODE = SGMII to Copper */ + m88e1518_phy_writebits(phydev, 20, 0, 3, 1); + + /* Phy reset */ + m88e1518_phy_writebits(phydev, 20, 15, 1, 1); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); /* reg page 18 */ + udelay(100); + } + + return m88e1111s_config(phydev); +} + /* Marvell 88E1118 */ static int m88e1118_config(struct phy_device *phydev) { @@ -493,7 +544,7 @@ static struct phy_driver M88E1518_driver = { .uid = 0x1410dd1, .mask = 0xffffff0, .features = PHY_GBIT_FEATURES, - .config = &m88e1111s_config, + .config = &m88e1518_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, }; diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 451c33e1a1..4bf493ed45 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -2,9 +2,9 @@ * sh_eth.c - Driver for Renesas ethernet controler. * * Copyright (C) 2008, 2011 Renesas Solutions Corp. - * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu + * Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com> - * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013, 2014 Renesas Electronics Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -83,6 +83,8 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len) else port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP; + flush_cache_wback(port_info->tx_desc_cur, sizeof(struct tx_desc_s)); + /* Restart the transmitter if disabled */ if (!(sh_eth_read(eth, EDTRR) & EDTRR_TRNS)) sh_eth_write(eth, EDTRR_TRNS, EDTRR); @@ -133,6 +135,10 @@ int sh_eth_recv(struct eth_device *dev) port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE; else port_info->rx_desc_cur->rd0 = RD_RACT; + + flush_cache_wback(port_info->rx_desc_cur, + sizeof(struct rx_desc_s)); + /* Point to the next descriptor */ port_info->rx_desc_cur++; if (port_info->rx_desc_cur >= @@ -181,27 +187,27 @@ static int sh_eth_reset(struct sh_eth_dev *eth) static int sh_eth_tx_desc_init(struct sh_eth_dev *eth) { int port = eth->port, i, ret = 0; - u32 tmp_addr; + u32 alloc_desc_size = NUM_TX_DESC * sizeof(struct tx_desc_s); struct sh_eth_info *port_info = ð->port_info[port]; struct tx_desc_s *cur_tx_desc; /* - * Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned + * Allocate rx descriptors. They must be aligned to size of struct + * tx_desc_s. */ - port_info->tx_desc_malloc = malloc(NUM_TX_DESC * - sizeof(struct tx_desc_s) + - TX_DESC_SIZE - 1); - if (!port_info->tx_desc_malloc) { - printf(SHETHER_NAME ": malloc failed\n"); + port_info->tx_desc_alloc = + memalign(sizeof(struct tx_desc_s), alloc_desc_size); + if (!port_info->tx_desc_alloc) { + printf(SHETHER_NAME ": memalign failed\n"); ret = -ENOMEM; goto err; } - tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) & - ~(TX_DESC_SIZE - 1)); - flush_cache_wback(tmp_addr, NUM_TX_DESC * sizeof(struct tx_desc_s)); + flush_cache_wback((u32)port_info->tx_desc_alloc, alloc_desc_size); + /* Make sure we use a P2 address (non-cacheable) */ - port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr); + port_info->tx_desc_base = + (struct tx_desc_s *)ADDR_TO_P2((u32)port_info->tx_desc_alloc); port_info->tx_desc_cur = port_info->tx_desc_base; /* Initialize all descriptors */ @@ -232,47 +238,44 @@ err: static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) { int port = eth->port, i , ret = 0; + u32 alloc_desc_size = NUM_RX_DESC * sizeof(struct rx_desc_s); struct sh_eth_info *port_info = ð->port_info[port]; struct rx_desc_s *cur_rx_desc; - u32 tmp_addr; u8 *rx_buf; /* - * Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned + * Allocate rx descriptors. They must be aligned to size of struct + * rx_desc_s. */ - port_info->rx_desc_malloc = malloc(NUM_RX_DESC * - sizeof(struct rx_desc_s) + - RX_DESC_SIZE - 1); - if (!port_info->rx_desc_malloc) { - printf(SHETHER_NAME ": malloc failed\n"); + port_info->rx_desc_alloc = + memalign(sizeof(struct rx_desc_s), alloc_desc_size); + if (!port_info->rx_desc_alloc) { + printf(SHETHER_NAME ": memalign failed\n"); ret = -ENOMEM; goto err; } - tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) & - ~(RX_DESC_SIZE - 1)); - flush_cache_wback(tmp_addr, NUM_RX_DESC * sizeof(struct rx_desc_s)); + flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size); + /* Make sure we use a P2 address (non-cacheable) */ - port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr); + port_info->rx_desc_base = + (struct rx_desc_s *)ADDR_TO_P2((u32)port_info->rx_desc_alloc); port_info->rx_desc_cur = port_info->rx_desc_base; /* - * Allocate rx data buffers. They must be 32 bytes aligned and in - * P2 area + * Allocate rx data buffers. They must be RX_BUF_ALIGNE_SIZE bytes + * aligned and in P2 area. */ - port_info->rx_buf_malloc = malloc( - NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1); - if (!port_info->rx_buf_malloc) { - printf(SHETHER_NAME ": malloc failed\n"); + port_info->rx_buf_alloc = + memalign(RX_BUF_ALIGNE_SIZE, NUM_RX_DESC * MAX_BUF_SIZE); + if (!port_info->rx_buf_alloc) { + printf(SHETHER_NAME ": alloc failed\n"); ret = -ENOMEM; - goto err_buf_malloc; + goto err_buf_alloc; } - tmp_addr = (u32)(((int)port_info->rx_buf_malloc - + (RX_BUF_ALIGNE_SIZE - 1)) & - ~(RX_BUF_ALIGNE_SIZE - 1)); - port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); + port_info->rx_buf_base = (u8 *)ADDR_TO_P2((u32)port_info->rx_buf_alloc); /* Initialize all descriptors */ for (cur_rx_desc = port_info->rx_desc_base, @@ -297,9 +300,9 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) return ret; -err_buf_malloc: - free(port_info->rx_desc_malloc); - port_info->rx_desc_malloc = NULL; +err_buf_alloc: + free(port_info->rx_desc_alloc); + port_info->rx_desc_alloc = NULL; err: return ret; @@ -310,9 +313,9 @@ static void sh_eth_tx_desc_free(struct sh_eth_dev *eth) int port = eth->port; struct sh_eth_info *port_info = ð->port_info[port]; - if (port_info->tx_desc_malloc) { - free(port_info->tx_desc_malloc); - port_info->tx_desc_malloc = NULL; + if (port_info->tx_desc_alloc) { + free(port_info->tx_desc_alloc); + port_info->tx_desc_alloc = NULL; } } @@ -321,14 +324,14 @@ static void sh_eth_rx_desc_free(struct sh_eth_dev *eth) int port = eth->port; struct sh_eth_info *port_info = ð->port_info[port]; - if (port_info->rx_desc_malloc) { - free(port_info->rx_desc_malloc); - port_info->rx_desc_malloc = NULL; + if (port_info->rx_desc_alloc) { + free(port_info->rx_desc_alloc); + port_info->rx_desc_alloc = NULL; } - if (port_info->rx_buf_malloc) { - free(port_info->rx_buf_malloc); - port_info->rx_buf_malloc = NULL; + if (port_info->rx_buf_alloc) { + free(port_info->rx_buf_alloc); + port_info->rx_buf_alloc = NULL; } } @@ -414,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740) sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII); #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR); #endif /* Configure phy */ @@ -440,7 +443,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 1, RTRATE); #elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \ - defined(CONFIG_R8A7791) || defined(CONFIG_R8A7794) + defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \ + defined(CONFIG_R8A7794) val = ECMR_RTM; #endif } else if (phy->speed == 10) { diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index e325a39aac..5cb520c63e 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -51,8 +51,6 @@ /* The size of the tx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ #define TX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) -/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ -#define TX_DESC_SIZE (12 + TX_DESC_PADDING) /* Tx descriptor. We always use 3 bytes of padding */ struct tx_desc_s { @@ -68,8 +66,6 @@ struct tx_desc_s { /* The size of the rx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ #define RX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) -/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ -#define RX_DESC_SIZE (12 + RX_DESC_PADDING) /* aligned cache line size */ #define RX_BUF_ALIGNE_SIZE (CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32) @@ -82,13 +78,13 @@ struct rx_desc_s { }; struct sh_eth_info { - struct tx_desc_s *tx_desc_malloc; + struct tx_desc_s *tx_desc_alloc; struct tx_desc_s *tx_desc_base; struct tx_desc_s *tx_desc_cur; - struct rx_desc_s *rx_desc_malloc; + struct rx_desc_s *rx_desc_alloc; struct rx_desc_s *rx_desc_base; struct rx_desc_s *rx_desc_cur; - u8 *rx_buf_malloc; + u8 *rx_buf_alloc; u8 *rx_buf_base; u8 mac_addr[6]; u8 phy_addr; @@ -359,7 +355,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #define SH_ETH_TYPE_GETHER #define BASE_IO_ADDR 0xE9A00000 #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define SH_ETH_TYPE_ETHER #define BASE_IO_ADDR 0xEE700200 #elif defined(CONFIG_R7S72100) @@ -571,7 +567,7 @@ enum FELIC_MODE_BIT { #ifdef CONFIG_CPU_SH7724 ECMR_RTM = 0x00000010, #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) ECMR_RTM = 0x00000004, #endif diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index b097c1a56f..5959672370 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -187,6 +187,7 @@ static int smc911x_send(struct eth_device *dev, void *packet, int length) static void smc911x_halt(struct eth_device *dev) { smc911x_reset(dev); + smc911x_handle_mac_address(dev); } static int smc911x_rx(struct eth_device *dev) diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index 538f11e3eb..9526faa4af 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -548,7 +548,7 @@ static int uli526x_rx_packet(struct eth_device *dev) rdes0 = le32_to_cpu(rxptr->rdes0); #ifdef RX_DEBUG - printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0); + printf("%s(): rxptr->rdes0=%x\n", __FUNCTION__, rxptr->rdes0); #endif if (!(rdes0 & 0x80000000)) { /* packet owner check */ if ((rdes0 & 0x300) != 0x300) { diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index e69de29bb2..1ec7c0e59a 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -0,0 +1,47 @@ +config AXP221_POWER + boolean "axp221 pmic support" + depends on MACH_SUN6I + default y + ---help--- + Say y here to enable support for the axp221 pmic found on most sun6i + (A31) boards. + +config AXP221_DLDO1_VOLT + int "axp221 dldo1 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 dldo1 at, set to -1 to + disable dldo1. + +config AXP221_DLDO4_VOLT + int "axp221 dldo4 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 dldo4 at, set to -1 to + disable dldo4. + +config AXP221_ALDO1_VOLT + int "axp221 aldo1 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 aldo1 at, set to -1 to + disable aldo1. + +config AXP221_ALDO2_VOLT + int "axp221 aldo2 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 aldo2 at, set to -1 to + disable aldo2. + +config AXP221_ALDO3_VOLT + int "axp221 aldo3 voltage" + depends on AXP221_POWER + default -1 + ---help--- + Set the voltage (mV) to program the axp221 aldo3 at, set to -1 to + disable aldo3. diff --git a/drivers/power/Makefile b/drivers/power/Makefile index dc64e4d32b..04bd996cad 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_AXP152_POWER) += axp152.o obj-$(CONFIG_AXP209_POWER) += axp209.o +obj-$(CONFIG_AXP221_POWER) += axp221.o obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o diff --git a/drivers/power/axp221.c b/drivers/power/axp221.c new file mode 100644 index 0000000000..941193a19d --- /dev/null +++ b/drivers/power/axp221.c @@ -0,0 +1,186 @@ +/* + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/arch/p2wi.h> +#include <axp221.h> + +static u8 axp221_mvolt_to_cfg(int mvolt, int min, int max, int div) +{ + if (mvolt < min) + mvolt = min; + else if (mvolt > max) + mvolt = max; + + return (mvolt - min) / div; +} + +static int axp221_setbits(u8 reg, u8 bits) +{ + int ret; + u8 val; + + ret = p2wi_read(reg, &val); + if (ret) + return ret; + + val |= bits; + return p2wi_write(reg, val); +} + +int axp221_set_dcdc1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 1600, 3400, 100); + + ret = p2wi_write(AXP221_DCDC1_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DCDC1_EN); +} + +int axp221_set_dcdc2(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20); + + return p2wi_write(AXP221_DCDC2_CTRL, cfg); +} + +int axp221_set_dcdc3(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1860, 20); + + return p2wi_write(AXP221_DCDC3_CTRL, cfg); +} + +int axp221_set_dcdc4(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 600, 1540, 20); + + return p2wi_write(AXP221_DCDC4_CTRL, cfg); +} + +int axp221_set_dcdc5(unsigned int mvolt) +{ + u8 cfg = axp221_mvolt_to_cfg(mvolt, 1000, 2550, 50); + + return p2wi_write(AXP221_DCDC5_CTRL, cfg); +} + +int axp221_set_dldo1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO1_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO1_EN); +} + +int axp221_set_dldo2(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO2_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO2_EN); +} + +int axp221_set_dldo3(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO3_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO3_EN); +} + +int axp221_set_dldo4(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_DLDO4_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL2, + AXP221_OUTPUT_CTRL2_DLDO4_EN); +} + +int axp221_set_aldo1(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_ALDO1_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL1, + AXP221_OUTPUT_CTRL1_ALDO1_EN); +} + +int axp221_set_aldo2(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_ALDO2_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL1, + AXP221_OUTPUT_CTRL1_ALDO2_EN); +} + +int axp221_set_aldo3(unsigned int mvolt) +{ + int ret; + u8 cfg = axp221_mvolt_to_cfg(mvolt, 700, 3300, 100); + + ret = p2wi_write(AXP221_ALDO3_CTRL, cfg); + if (ret) + return ret; + + return axp221_setbits(AXP221_OUTPUT_CTRL3, + AXP221_OUTPUT_CTRL3_ALDO3_EN); +} + +int axp221_init(void) +{ + u8 axp_chip_id; + int ret; + + p2wi_init(); + ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR, + AXP221_INIT_DATA); + if (ret) + return ret; + + ret = p2wi_read(AXP221_CHIP_ID, &axp_chip_id); + if (ret) + return ret; + + if (!(axp_chip_id == 0x6 || axp_chip_id == 0x7 || axp_chip_id == 0x17)) + return -ENODEV; + + return 0; +} diff --git a/drivers/power/power_spi.c b/drivers/power/power_spi.c index fb455a0061..1e554461f3 100644 --- a/drivers/power/power_spi.c +++ b/drivers/power/power_spi.c @@ -17,27 +17,14 @@ static struct spi_slave *slave; -void pmic_spi_free(struct spi_slave *slave) -{ - if (slave) - spi_free_slave(slave); -} - -struct spi_slave *pmic_spi_probe(struct pmic *p) -{ - return spi_setup_slave(p->bus, - p->hw.spi.cs, - p->hw.spi.clk, - p->hw.spi.mode); -} - static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) { u32 pmic_tx, pmic_rx; u32 tmp; if (!slave) { - slave = pmic_spi_probe(p); + slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk, + p->hw.spi.mode); if (!slave) return -1; @@ -54,25 +41,25 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, - pmic_spi_flags)) { - spi_release_bus(slave); - return -1; - } + pmic_spi_flags)) + goto err; if (write) { pmic_tx = p->hw.spi.prepare_tx(reg, val, 0); tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, - pmic_spi_flags)) { - spi_release_bus(slave); - return -1; - } + pmic_spi_flags)) + goto err; } spi_release_bus(slave); *val = cpu_to_be32(pmic_rx); return 0; + +err: + spi_release_bus(slave); + return -1; } int pmic_reg_write(struct pmic *p, u32 reg, u32 val) diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index 3e50310464..e578ae6342 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -98,4 +98,10 @@ void twl4030_power_mmc_init(void) TWL4030_PM_RECEIVER_VMMC1_VSEL_32, TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* Set VMMC2 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2c19ebc288..8c84942761 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o +obj-$(CONFIG_DW_SERIAL) += serial_dw.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 18e41b2302..95c992a5a3 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -109,54 +109,54 @@ U_BOOT_ENV_CALLBACK(baudrate, on_baudrate); void name(void) \ __attribute__((weak, alias("serial_null"))); -serial_initfunc(mpc8xx_serial_initialize); -serial_initfunc(ns16550_serial_initialize); -serial_initfunc(pxa_serial_initialize); -serial_initfunc(s3c24xx_serial_initialize); -serial_initfunc(s5p_serial_initialize); -serial_initfunc(zynq_serial_initialize); -serial_initfunc(bfin_serial_initialize); -serial_initfunc(bfin_jtag_initialize); -serial_initfunc(mpc512x_serial_initialize); -serial_initfunc(uartlite_serial_initialize); -serial_initfunc(au1x00_serial_initialize); -serial_initfunc(asc_serial_initialize); -serial_initfunc(jz_serial_initialize); -serial_initfunc(mpc5xx_serial_initialize); -serial_initfunc(mpc8260_scc_serial_initialize); -serial_initfunc(mpc8260_smc_serial_initialize); -serial_initfunc(mpc85xx_serial_initialize); -serial_initfunc(iop480_serial_initialize); -serial_initfunc(leon2_serial_initialize); -serial_initfunc(leon3_serial_initialize); -serial_initfunc(marvell_serial_initialize); +serial_initfunc(altera_jtag_serial_initialize); +serial_initfunc(altera_serial_initialize); serial_initfunc(amirix_serial_initialize); +serial_initfunc(arc_serial_initialize); +serial_initfunc(arm_dcc_initialize); +serial_initfunc(asc_serial_initialize); +serial_initfunc(atmel_serial_initialize); +serial_initfunc(au1x00_serial_initialize); +serial_initfunc(bfin_jtag_initialize); +serial_initfunc(bfin_serial_initialize); serial_initfunc(bmw_serial_initialize); +serial_initfunc(clps7111_serial_initialize); serial_initfunc(cogent_serial_initialize); serial_initfunc(cpci750_serial_initialize); serial_initfunc(evb64260_serial_initialize); -serial_initfunc(ml2_serial_initialize); -serial_initfunc(sconsole_serial_initialize); -serial_initfunc(p3mx_serial_initialize); -serial_initfunc(altera_jtag_serial_initialize); -serial_initfunc(altera_serial_initialize); -serial_initfunc(atmel_serial_initialize); -serial_initfunc(lpc32xx_serial_initialize); -serial_initfunc(mcf_serial_initialize); -serial_initfunc(oc_serial_initialize); -serial_initfunc(sandbox_serial_initialize); -serial_initfunc(clps7111_serial_initialize); serial_initfunc(imx_serial_initialize); +serial_initfunc(iop480_serial_initialize); +serial_initfunc(jz_serial_initialize); serial_initfunc(ks8695_serial_initialize); +serial_initfunc(leon2_serial_initialize); +serial_initfunc(leon3_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); +serial_initfunc(lpc32xx_serial_initialize); +serial_initfunc(marvell_serial_initialize); serial_initfunc(max3100_serial_initialize); +serial_initfunc(mcf_serial_initialize); +serial_initfunc(ml2_serial_initialize); +serial_initfunc(mpc512x_serial_initialize); +serial_initfunc(mpc5xx_serial_initialize); +serial_initfunc(mpc8260_scc_serial_initialize); +serial_initfunc(mpc8260_smc_serial_initialize); +serial_initfunc(mpc85xx_serial_initialize); +serial_initfunc(mpc8xx_serial_initialize); serial_initfunc(mxc_serial_initialize); +serial_initfunc(mxs_auart_initialize); +serial_initfunc(ns16550_serial_initialize); +serial_initfunc(oc_serial_initialize); +serial_initfunc(p3mx_serial_initialize); serial_initfunc(pl01x_serial_initialize); +serial_initfunc(pxa_serial_initialize); +serial_initfunc(s3c24xx_serial_initialize); +serial_initfunc(s5p_serial_initialize); serial_initfunc(sa1100_serial_initialize); +serial_initfunc(sandbox_serial_initialize); +serial_initfunc(sconsole_serial_initialize); serial_initfunc(sh_serial_initialize); -serial_initfunc(arm_dcc_initialize); -serial_initfunc(mxs_auart_initialize); -serial_initfunc(arc_serial_initialize); +serial_initfunc(uartlite_serial_initialize); +serial_initfunc(zynq_serial_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -202,54 +202,54 @@ void serial_register(struct serial_device *dev) */ void serial_initialize(void) { - mpc8xx_serial_initialize(); - ns16550_serial_initialize(); - pxa_serial_initialize(); - s3c24xx_serial_initialize(); - s5p_serial_initialize(); - mpc512x_serial_initialize(); - bfin_serial_initialize(); - bfin_jtag_initialize(); - uartlite_serial_initialize(); - zynq_serial_initialize(); - au1x00_serial_initialize(); - asc_serial_initialize(); - jz_serial_initialize(); - mpc5xx_serial_initialize(); - mpc8260_scc_serial_initialize(); - mpc8260_smc_serial_initialize(); - mpc85xx_serial_initialize(); - iop480_serial_initialize(); - leon2_serial_initialize(); - leon3_serial_initialize(); - marvell_serial_initialize(); + altera_jtag_serial_initialize(); + altera_serial_initialize(); amirix_serial_initialize(); + arc_serial_initialize(); + arm_dcc_initialize(); + asc_serial_initialize(); + atmel_serial_initialize(); + au1x00_serial_initialize(); + bfin_jtag_initialize(); + bfin_serial_initialize(); bmw_serial_initialize(); + clps7111_serial_initialize(); cogent_serial_initialize(); cpci750_serial_initialize(); evb64260_serial_initialize(); - ml2_serial_initialize(); - sconsole_serial_initialize(); - p3mx_serial_initialize(); - altera_jtag_serial_initialize(); - altera_serial_initialize(); - atmel_serial_initialize(); - lpc32xx_serial_initialize(); - mcf_serial_initialize(); - oc_serial_initialize(); - sandbox_serial_initialize(); - clps7111_serial_initialize(); imx_serial_initialize(); + iop480_serial_initialize(); + jz_serial_initialize(); ks8695_serial_initialize(); + leon2_serial_initialize(); + leon3_serial_initialize(); lh7a40x_serial_initialize(); + lpc32xx_serial_initialize(); + marvell_serial_initialize(); max3100_serial_initialize(); + mcf_serial_initialize(); + ml2_serial_initialize(); + mpc512x_serial_initialize(); + mpc5xx_serial_initialize(); + mpc8260_scc_serial_initialize(); + mpc8260_smc_serial_initialize(); + mpc85xx_serial_initialize(); + mpc8xx_serial_initialize(); mxc_serial_initialize(); + mxs_auart_initialize(); + ns16550_serial_initialize(); + oc_serial_initialize(); + p3mx_serial_initialize(); pl01x_serial_initialize(); + pxa_serial_initialize(); + s3c24xx_serial_initialize(); + s5p_serial_initialize(); sa1100_serial_initialize(); + sandbox_serial_initialize(); + sconsole_serial_initialize(); sh_serial_initialize(); - arm_dcc_initialize(); - mxs_auart_initialize(); - arc_serial_initialize(); + uartlite_serial_initialize(); + zynq_serial_initialize(); serial_assign(default_serial_console()->name); } diff --git a/drivers/serial/serial_dw.c b/drivers/serial/serial_dw.c new file mode 100644 index 0000000000..a348f2956a --- /dev/null +++ b/drivers/serial/serial_dw.c @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> + +static const struct udevice_id dw_serial_ids[] = { + { .compatible = "snps,dw-apb-uart" }, + { } +}; + +static int dw_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = CONFIG_SYS_NS16550_CLK; + + return 0; +} + +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_dw", + .id = UCLASS_SERIAL, + .of_match = dw_serial_ids, + .ofdata_to_platdata = dw_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, +}; diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index fe8cde4ded..53406e5855 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -227,7 +227,7 @@ struct uart_port { # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ORER 0x0001 # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ #else @@ -304,7 +304,8 @@ struct uart_port { /* SH7763 SCIF2 support */ # define SCIF2_RFDC_MASK 0x001f # define SCIF2_TXROOM_MAX 16 -#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) # define SCIF_RFDC_MASK 0x003f #else @@ -589,7 +590,7 @@ SCIF_FNS(SCSPTR, 0, 0, 0, 0) SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) #endif #if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) SCIF_FNS(DL, 0, 0, 0x30, 16) SCIF_FNS(CKS, 0, 0, 0x34, 16) #endif @@ -734,7 +735,8 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk) #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) /* Internal Clock */ #else /* Generic SH */ diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index 9114b3ed60..6046efb51f 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -5,7 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/serial_reg.h> #include <asm/io.h> #include <asm/errno.h> #include <dm/device.h> @@ -37,17 +37,6 @@ struct uniphier_serial { #define thr rbr -/* - * These are the definitions for the Line Control Register - */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ - struct uniphier_serial_private_data { struct uniphier_serial __iomem *membase; }; @@ -55,14 +44,14 @@ struct uniphier_serial_private_data { #define uniphier_serial_port(dev) \ ((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase -int uniphier_serial_setbrg(struct udevice *dev, int baudrate) +static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) { struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); struct uniphier_serial __iomem *port = uniphier_serial_port(dev); const unsigned int mode_x_div = 16; unsigned int divisor; - writeb(UART_LCR_WLS_8, &port->lcr); + writeb(UART_LCR_WLEN8, &port->lcr); divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); @@ -93,7 +82,17 @@ static int uniphier_serial_putc(struct udevice *dev, const char c) return 0; } -int uniphier_serial_probe(struct udevice *dev) +static int uniphier_serial_pending(struct udevice *dev, bool input) +{ + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); + + if (input) + return readb(&port->lsr) & UART_LSR_DR; + else + return !(readb(&port->lsr) & UART_LSR_THRE); +} + +static int uniphier_serial_probe(struct udevice *dev) { struct uniphier_serial_private_data *priv = dev_get_priv(dev); struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); @@ -106,7 +105,7 @@ int uniphier_serial_probe(struct udevice *dev) return 0; } -int uniphier_serial_remove(struct udevice *dev) +static int uniphier_serial_remove(struct udevice *dev) { unmap_sysmem(uniphier_serial_port(dev)); @@ -134,6 +133,7 @@ static const struct dm_serial_ops uniphier_serial_ops = { .setbrg = uniphier_serial_setbrg, .getc = uniphier_serial_getc, .putc = uniphier_serial_putc, + .pending = uniphier_serial_pending, }; U_BOOT_DRIVER(uniphier_serial) = { diff --git a/drivers/spi/altera_spi.c b/drivers/spi/altera_spi.c index 5accbb5c22..a4d03d97cf 100644 --- a/drivers/spi/altera_spi.c +++ b/drivers/spi/altera_spi.c @@ -12,58 +12,62 @@ #include <malloc.h> #include <spi.h> -#define ALTERA_SPI_RXDATA 0 -#define ALTERA_SPI_TXDATA 4 -#define ALTERA_SPI_STATUS 8 -#define ALTERA_SPI_CONTROL 12 -#define ALTERA_SPI_SLAVE_SEL 20 - -#define ALTERA_SPI_STATUS_ROE_MSK (0x8) -#define ALTERA_SPI_STATUS_TOE_MSK (0x10) -#define ALTERA_SPI_STATUS_TMT_MSK (0x20) -#define ALTERA_SPI_STATUS_TRDY_MSK (0x40) -#define ALTERA_SPI_STATUS_RRDY_MSK (0x80) -#define ALTERA_SPI_STATUS_E_MSK (0x100) - -#define ALTERA_SPI_CONTROL_IROE_MSK (0x8) -#define ALTERA_SPI_CONTROL_ITOE_MSK (0x10) -#define ALTERA_SPI_CONTROL_ITRDY_MSK (0x40) -#define ALTERA_SPI_CONTROL_IRRDY_MSK (0x80) -#define ALTERA_SPI_CONTROL_IE_MSK (0x100) -#define ALTERA_SPI_CONTROL_SSO_MSK (0x400) +#ifndef CONFIG_ALTERA_SPI_IDLE_VAL +#define CONFIG_ALTERA_SPI_IDLE_VAL 0xff +#endif #ifndef CONFIG_SYS_ALTERA_SPI_LIST #define CONFIG_SYS_ALTERA_SPI_LIST { CONFIG_SYS_SPI_BASE } #endif +struct altera_spi_regs { + u32 rxdata; + u32 txdata; + u32 status; + u32 control; + u32 _reserved; + u32 slave_sel; +}; + +#define ALTERA_SPI_STATUS_ROE_MSK (1 << 3) +#define ALTERA_SPI_STATUS_TOE_MSK (1 << 4) +#define ALTERA_SPI_STATUS_TMT_MSK (1 << 5) +#define ALTERA_SPI_STATUS_TRDY_MSK (1 << 6) +#define ALTERA_SPI_STATUS_RRDY_MSK (1 << 7) +#define ALTERA_SPI_STATUS_E_MSK (1 << 8) + +#define ALTERA_SPI_CONTROL_IROE_MSK (1 << 3) +#define ALTERA_SPI_CONTROL_ITOE_MSK (1 << 4) +#define ALTERA_SPI_CONTROL_ITRDY_MSK (1 << 6) +#define ALTERA_SPI_CONTROL_IRRDY_MSK (1 << 7) +#define ALTERA_SPI_CONTROL_IE_MSK (1 << 8) +#define ALTERA_SPI_CONTROL_SSO_MSK (1 << 10) + static ulong altera_spi_base_list[] = CONFIG_SYS_ALTERA_SPI_LIST; struct altera_spi_slave { - struct spi_slave slave; - ulong base; + struct spi_slave slave; + struct altera_spi_regs *regs; }; #define to_altera_spi_slave(s) container_of(s, struct altera_spi_slave, slave) -__attribute__((weak)) -int spi_cs_is_valid(unsigned int bus, unsigned int cs) +__weak int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus < ARRAY_SIZE(altera_spi_base_list) && cs < 32; } -__attribute__((weak)) -void spi_cs_activate(struct spi_slave *slave) +__weak void spi_cs_activate(struct spi_slave *slave) { struct altera_spi_slave *altspi = to_altera_spi_slave(slave); - writel(1 << slave->cs, altspi->base + ALTERA_SPI_SLAVE_SEL); - writel(ALTERA_SPI_CONTROL_SSO_MSK, altspi->base + ALTERA_SPI_CONTROL); + writel(1 << slave->cs, &altspi->regs->slave_sel); + writel(ALTERA_SPI_CONTROL_SSO_MSK, &altspi->regs->control); } -__attribute__((weak)) -void spi_cs_deactivate(struct spi_slave *slave) +__weak void spi_cs_deactivate(struct spi_slave *slave) { struct altera_spi_slave *altspi = to_altera_spi_slave(slave); - writel(0, altspi->base + ALTERA_SPI_CONTROL); - writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); + writel(0, &altspi->regs->control); + writel(0, &altspi->regs->slave_sel); } void spi_init(void) @@ -87,9 +91,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!altspi) return NULL; - altspi->base = altera_spi_base_list[bus]; - debug("%s: bus:%i cs:%i base:%lx\n", __func__, - bus, cs, altspi->base); + altspi->regs = (struct altera_spi_regs *)altera_spi_base_list[bus]; + debug("%s: bus:%i cs:%i base:%p\n", __func__, bus, cs, altspi->regs); return &altspi->slave; } @@ -105,8 +108,8 @@ int spi_claim_bus(struct spi_slave *slave) struct altera_spi_slave *altspi = to_altera_spi_slave(slave); debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); - writel(0, altspi->base + ALTERA_SPI_CONTROL); - writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); + writel(0, &altspi->regs->control); + writel(0, &altspi->regs->slave_sel); return 0; } @@ -115,24 +118,22 @@ void spi_release_bus(struct spi_slave *slave) struct altera_spi_slave *altspi = to_altera_spi_slave(slave); debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); - writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); + writel(0, &altspi->regs->slave_sel); } -#ifndef CONFIG_ALTERA_SPI_IDLE_VAL -# define CONFIG_ALTERA_SPI_IDLE_VAL 0xff -#endif - int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { struct altera_spi_slave *altspi = to_altera_spi_slave(slave); /* assume spi core configured to do 8 bit transfers */ - uint bytes = bitlen / 8; - const uchar *txp = dout; - uchar *rxp = din; + unsigned int bytes = bitlen / 8; + const unsigned char *txp = dout; + unsigned char *rxp = din; + uint32_t reg, data, start; debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, - slave->bus, slave->cs, bitlen, bytes, flags); + slave->bus, slave->cs, bitlen, bytes, flags); + if (bitlen == 0) goto done; @@ -142,25 +143,40 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } /* empty read buffer */ - if (readl(altspi->base + ALTERA_SPI_STATUS) & - ALTERA_SPI_STATUS_RRDY_MSK) - readl(altspi->base + ALTERA_SPI_RXDATA); + if (readl(&altspi->regs->status) & ALTERA_SPI_STATUS_RRDY_MSK) + readl(&altspi->regs->rxdata); + if (flags & SPI_XFER_BEGIN) spi_cs_activate(slave); while (bytes--) { - uchar d = txp ? *txp++ : CONFIG_ALTERA_SPI_IDLE_VAL; - debug("%s: tx:%x ", __func__, d); - writel(d, altspi->base + ALTERA_SPI_TXDATA); - while (!(readl(altspi->base + ALTERA_SPI_STATUS) & - ALTERA_SPI_STATUS_RRDY_MSK)) - ; - d = readl(altspi->base + ALTERA_SPI_RXDATA); + if (txp) + data = *txp++; + else + data = CONFIG_ALTERA_SPI_IDLE_VAL; + + debug("%s: tx:%x ", __func__, data); + writel(data, &altspi->regs->txdata); + + start = get_timer(0); + while (1) { + reg = readl(&altspi->regs->status); + if (reg & ALTERA_SPI_STATUS_RRDY_MSK) + break; + if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { + printf("%s: Transmission timed out!\n", __func__); + goto done; + } + } + + data = readl(&altspi->regs->rxdata); if (rxp) - *rxp++ = d; - debug("rx:%x\n", d); + *rxp++ = data & 0xff; + + debug("rx:%x\n", data); } - done: + +done: if (flags & SPI_XFER_END) spi_cs_deactivate(slave); diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index be102692d4..23f2ba6223 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -49,6 +49,8 @@ struct mxc_spi_slave { #endif int gpio; int ss_pol; + unsigned int max_hz; + unsigned int mode; }; static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) @@ -83,12 +85,13 @@ u32 get_cspi_div(u32 div) } #ifdef MXC_CSPI -static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs) { unsigned int ctrl_reg; u32 clk_src; u32 div; + unsigned int max_hz = mxcs->max_hz; + unsigned int mode = mxcs->mode; clk_src = mxc_get_clock(MXC_CSPI_CLK); @@ -120,19 +123,15 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, #endif #ifdef MXC_ECSPI -static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs) { u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); s32 reg_ctrl, reg_config; u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, sclkctl = 0; u32 pre_div = 0, post_div = 0; struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; - - if (max_hz == 0) { - printf("Error: desired clock is 0\n"); - return -1; - } + unsigned int max_hz = mxcs->max_hz; + unsigned int mode = mxcs->mode; /* * Reset SPI and set all CSs to master mode, if toggling @@ -169,9 +168,6 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) | MXC_CSPICTRL_POSTDIV(post_div); - /* We need to disable SPI before changing registers */ - reg_ctrl &= ~MXC_CSPICTRL_EN; - if (mode & SPI_CS_HIGH) ss_pol = 1; @@ -412,6 +408,11 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (bus >= ARRAY_SIZE(spi_bases)) return NULL; + if (max_hz == 0) { + printf("Error: desired clock is 0\n"); + return NULL; + } + mxcs = spi_alloc_slave(struct mxc_spi_slave, bus, cs); if (!mxcs) { puts("mxc_spi: SPI Slave not allocated !\n"); @@ -427,13 +428,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, } mxcs->base = spi_bases[bus]; + mxcs->max_hz = max_hz; + mxcs->mode = mode; - ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); - if (ret) { - printf("mxc_spi: cannot setup SPI controller\n"); - free(mxcs); - return NULL; - } return &mxcs->slave; } @@ -446,12 +443,17 @@ void spi_free_slave(struct spi_slave *slave) int spi_claim_bus(struct spi_slave *slave) { + int ret; struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; reg_write(®s->rxdata, 1); udelay(1); - reg_write(®s->ctrl, mxcs->ctrl_reg); + ret = spi_cfg_mxc(mxcs, slave->cs); + if (ret) { + printf("mxc_spi: cannot setup SPI controller\n"); + return ret; + } reg_write(®s->period, MXC_CSPIPERIOD_32KHZ); reg_write(®s->intr, 0); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index e69de29bb2..b4a9442703 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -0,0 +1,46 @@ +config USB_ARCH_HAS_HCD + def_bool y + +config USB + bool "Support for Host-side USB" + depends on USB_ARCH_HAS_HCD + ---help--- + Universal Serial Bus (USB) is a specification for a serial bus + subsystem which offers higher speeds and more features than the + traditional PC serial port. The bus supplies power to peripherals + and allows for hot swapping. Up to 127 USB peripherals can be + connected to a single USB host in a tree structure. + + The USB host is the root of the tree, the peripherals are the + leaves and the inner nodes are special USB devices called hubs. + Most PCs now have USB host ports, used to connect peripherals + such as scanners, keyboards, mice, modems, cameras, disks, + flash memory, network links, and printers to the PC. + + Say Y here if your computer has a host-side USB port and you want + to use USB devices. You then need to say Y to at least one of the + Host Controller Driver (HCD) options below. Choose a USB 1.1 + controller, such as "UHCI HCD support" or "OHCI HCD support", + and "EHCI HCD (USB 2.0) support" except for older systems that + do not have USB 2.0 support. It doesn't normally hurt to select + them all if you are not certain. + + If your system has a device-side USB port, used in the peripheral + side of the USB protocol, see the "USB Gadget" framework instead. + + After choosing your HCD, then select drivers for the USB peripherals + you'll be using. You may want to check out the information provided + in <file:Documentation/usb/> and especially the links given in + <file:Documentation/usb/usb-help.txt>. + +if USB + +source "drivers/usb/host/Kconfig" + +config USB_STORAGE + bool "USB Mass Storage support" + ---help--- + Say Y here if you want to connect USB mass storage devices to your + board's USB port. + +endif diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile index 94551c4c0c..e6ae9f1e52 100644 --- a/drivers/usb/eth/Makefile +++ b/drivers/usb/eth/Makefile @@ -5,8 +5,6 @@ # new USB host ethernet layer dependencies obj-$(CONFIG_USB_HOST_ETHER) += usb_ether.o -ifdef CONFIG_USB_ETHER_ASIX -obj-y += asix.o -endif +obj-$(CONFIG_USB_ETHER_ASIX) += asix.o obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 2efd5a4d5b..70bb550fa4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o ifdef CONFIG_USB_GADGET obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o +obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o obj-$(CONFIG_THOR_FUNCTION) += f_thor.o diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c index b9816dfe30..7653f03949 100644 --- a/drivers/usb/gadget/s3c_udc_otg.c +++ b/drivers/usb/gadget/s3c_udc_otg.c @@ -31,7 +31,6 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <asm/arch/gpio.h> #include "regs-otg.h" #include <usb/lin_gadget_compat.h> @@ -105,7 +104,7 @@ static void stop_activity(struct s3c_udc *dev, struct usb_gadget_driver *driver); static int udc_enable(struct s3c_udc *dev); static void udc_set_address(struct s3c_udc *dev, unsigned char address); -static void reconfig_usbd(void); +static void reconfig_usbd(struct s3c_udc *dev); static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed); static void nuke(struct s3c_ep *ep, int status); static int s3c_udc_set_halt(struct usb_ep *_ep, int value); @@ -146,68 +145,14 @@ static struct usb_ep_ops s3c_ep_ops = { void __iomem *regs_otg; struct s3c_usbotg_reg *reg; -struct s3c_usbotg_phy *phy; -static unsigned int usb_phy_ctrl; bool dfu_usb_get_reset(void) { return !!(readl(®->gintsts) & INT_RESET); } -void otg_phy_init(struct s3c_udc *dev) -{ - dev->pdata->phy_control(1); - - /*USB PHY0 Enable */ - printf("USB PHY0 Enable\n"); - - /* Enable PHY */ - writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl); - - if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */ - writel((readl(&phy->phypwr) - &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN) - &~FORCE_SUSPEND_0), &phy->phypwr); - else /* C110 GONI */ - writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN) - &~FORCE_SUSPEND_0), &phy->phypwr); - - if (s5p_cpu_id == 0x4412) - writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 | - EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ, - &phy->phyclk); /* PLL 24Mhz */ - else - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) | - CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */ - - writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST)) - | PHY_SW_RST0, &phy->rstcon); - udelay(10); - writel(readl(&phy->rstcon) - &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon); - udelay(10); -} - -void otg_phy_off(struct s3c_udc *dev) -{ - /* reset controller just in case */ - writel(PHY_SW_RST0, &phy->rstcon); - udelay(20); - writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon); - udelay(20); - - writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN - | FORCE_SUSPEND_0, &phy->phypwr); - - writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl); - - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)), - &phy->phyclk); - - udelay(10000); - - dev->pdata->phy_control(0); -} +__weak void otg_phy_init(struct s3c_udc *dev) {} +__weak void otg_phy_off(struct s3c_udc *dev) {} /***********************************************************/ @@ -270,7 +215,7 @@ static int udc_enable(struct s3c_udc *dev) debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev); otg_phy_init(dev); - reconfig_usbd(); + reconfig_usbd(dev); debug_cond(DEBUG_SETUP != 0, "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n", @@ -451,15 +396,17 @@ static void stop_activity(struct s3c_udc *dev, udc_reinit(dev); } -static void reconfig_usbd(void) +static void reconfig_usbd(struct s3c_udc *dev) { /* 2. Soft-reset OTG Core and then unreset again. */ int i; unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl); + uint32_t dflt_gusbcfg; debug("Reseting OTG controller\n"); - writel(0<<15 /* PHY Low Power Clock sel*/ + dflt_gusbcfg = + 0<<15 /* PHY Low Power Clock sel*/ |1<<14 /* Non-Periodic TxFIFO Rewind Enable*/ |0x5<<10 /* Turnaround time*/ |0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/ @@ -468,8 +415,12 @@ static void reconfig_usbd(void) |0<<6 /* 0: high speed utmi+, 1: full speed serial*/ |0<<4 /* 0: utmi+, 1:ulpi*/ |1<<3 /* phy i/f 0:8bit, 1:16bit*/ - |0x7<<0, /* HS/FS Timeout**/ - ®->gusbcfg); + |0x7<<0; /* HS/FS Timeout**/ + + if (dev->pdata->usb_gusbcfg) + dflt_gusbcfg = dev->pdata->usb_gusbcfg; + + writel(dflt_gusbcfg, ®->gusbcfg); /* 3. Put the OTG device core in the disconnected state.*/ uTemp = readl(®->dctl); @@ -854,9 +805,7 @@ int s3c_udc_probe(struct s3c_plat_otg_data *pdata) dev->pdata = pdata; - phy = (struct s3c_usbotg_phy *)pdata->regs_phy; reg = (struct s3c_usbotg_reg *)pdata->regs_otg; - usb_phy_ctrl = pdata->usb_phy_ctrl; /* regs_otg = (void *)pdata->regs_otg; */ diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c b/drivers/usb/gadget/s3c_udc_otg_phy.c new file mode 100644 index 0000000000..f13cb8910a --- /dev/null +++ b/drivers/usb/gadget/s3c_udc_otg_phy.c @@ -0,0 +1,101 @@ +/* + * drivers/usb/gadget/s3c_udc_otg.c + * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * + * Copyright (C) 2008 for Samsung Electronics + * + * BSP Support for Samsung's UDC driver + * available at: + * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git + * + * State machine bugfixes: + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * Ported to u-boot: + * Marek Szyprowski <m.szyprowski@samsung.com> + * Lukasz Majewski <l.majewski@samsumg.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/errno.h> +#include <linux/list.h> +#include <malloc.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <asm/io.h> + +#include <asm/mach-types.h> + +#include "regs-otg.h" +#include <usb/lin_gadget_compat.h> + +#include <usb/s3c_udc.h> + +void otg_phy_init(struct s3c_udc *dev) +{ + unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl; + struct s3c_usbotg_phy *phy = + (struct s3c_usbotg_phy *)dev->pdata->regs_phy; + + dev->pdata->phy_control(1); + + /* USB PHY0 Enable */ + printf("USB PHY0 Enable\n"); + + /* Enable PHY */ + writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl); + + if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */ + writel((readl(&phy->phypwr) + &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN) + &~FORCE_SUSPEND_0), &phy->phypwr); + else /* C110 GONI */ + writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN) + &~FORCE_SUSPEND_0), &phy->phypwr); + + if (s5p_cpu_id == 0x4412) + writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 | + EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ, + &phy->phyclk); /* PLL 24Mhz */ + else + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) | + CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */ + + writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST)) + | PHY_SW_RST0, &phy->rstcon); + udelay(10); + writel(readl(&phy->rstcon) + &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon); + udelay(10); +} + +void otg_phy_off(struct s3c_udc *dev) +{ + unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl; + struct s3c_usbotg_phy *phy = + (struct s3c_usbotg_phy *)dev->pdata->regs_phy; + + /* reset controller just in case */ + writel(PHY_SW_RST0, &phy->rstcon); + udelay(20); + writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon); + udelay(20); + + writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN + | FORCE_SUSPEND_0, &phy->phypwr); + + writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl); + + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)), + &phy->phyclk); + + udelay(10000); + + dev->pdata->phy_control(0); +} diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c index 4f69b22a25..9c54b462c4 100644 --- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c @@ -551,7 +551,7 @@ static int s3c_udc_irq(int irq, void *_dev) debug_cond(DEBUG_ISR, "\t\tOTG core got reset (%d)!!\n", reset_available); - reconfig_usbd(); + reconfig_usbd(dev); dev->ep0state = WAIT_FOR_SETUP; reset_available = 0; s3c_udc_pre_setup(); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig new file mode 100644 index 0000000000..30d1457638 --- /dev/null +++ b/drivers/usb/host/Kconfig @@ -0,0 +1,56 @@ +# +# USB Host Controller Drivers +# +comment "USB Host Controller Drivers" + +config USB_XHCI_HCD + bool "xHCI HCD (USB 3.0) support" + ---help--- + The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 + "SuperSpeed" host controller hardware. + +config USB_XHCI + bool + default USB_XHCI_HCD + ---help--- + TODO: rename after most boards switch to Kconfig + +if USB_XHCI_HCD + +endif + +config USB_EHCI_HCD + bool "EHCI HCD (USB 2.0) support" + ---help--- + The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 + "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. + If your USB host controller supports USB 2.0, you will likely want to + configure this Host Controller Driver. + + EHCI controllers are packaged with "companion" host controllers (OHCI + or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports + will connect to EHCI if the device is high speed, otherwise they + connect to a companion controller. If you configure EHCI, you should + probably configure the OHCI (for NEC and some other vendors) USB Host + Controller Driver or UHCI (for Via motherboards) Host Controller + Driver too. + + You may want to read <file:Documentation/usb/ehci.txt>. + +config USB_EHCI + bool + default USB_EHCI_HCD + ---help--- + TODO: rename after most boards switch to Kconfig + +if USB_EHCI_HCD + +config USB_EHCI_UNIPHIER + bool "Support for Panasonic UniPhier on-chip EHCI USB controller" + depends on ARCH_UNIPHIER + default y + ---help--- + Enables support for the on-chip EHCI controller on Panasonic + UniPhier SoCs. + +endif diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1c3592914d..c11b551620 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o +obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 936d006ba4..c671c72cb1 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1097,6 +1097,7 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, } struct int_queue { + int elementsize; struct QH *first; struct QH *current; struct QH *last; @@ -1154,6 +1155,23 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, struct int_queue *result = NULL; int i; + /* + * Interrupt transfers requiring several transactions are not supported + * because bInterval is ignored. + * + * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 + * <= PKT_ALIGN if several qTDs are required, while the USB + * specification does not constrain this for interrupt transfers. That + * means that ehci_submit_async() would support interrupt transfers + * requiring several transactions only as long as the transfer size does + * not require more than a single qTD. + */ + if (elementsize > usb_maxpacket(dev, pipe)) { + printf("%s: xfers requiring several transactions are not supported.\n", + __func__); + return NULL; + } + debug("Enter create_int_queue\n"); if (usb_pipetype(pipe) != PIPE_INTERRUPT) { debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); @@ -1174,6 +1192,7 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, debug("ehci intr queue: out of memory\n"); goto fail1; } + result->elementsize = elementsize; result->first = memalign(USB_DMA_MINALIGN, sizeof(struct QH) * queuesize); if (!result->first) { @@ -1249,9 +1268,11 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, ALIGN_END_ADDR(struct qTD, result->tds, queuesize)); - if (disable_periodic(ctrl) < 0) { - debug("FATAL: periodic should never fail, but did"); - goto fail3; + if (ctrl->periodic_schedules > 0) { + if (disable_periodic(ctrl) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } } /* hook up to periodic list */ @@ -1308,13 +1329,18 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) queue->current++; else queue->current = NULL; + + invalidate_dcache_range((uint32_t)cur->buffer, + ALIGN_END_ADDR(char, cur->buffer, + queue->elementsize)); + debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", hc32_to_cpu(cur_td->qt_token), cur, queue->first); return cur->buffer; } /* Do not free buffers associated with QHs, they're owned by someone else */ -static int +int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) { struct ehci_ctrl *ctrl = dev->controller; @@ -1373,24 +1399,9 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", dev, pipe, buffer, length, interval); - /* - * Interrupt transfers requiring several transactions are not supported - * because bInterval is ignored. - * - * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 - * <= PKT_ALIGN if several qTDs are required, while the USB - * specification does not constrain this for interrupt transfers. That - * means that ehci_submit_async() would support interrupt transfers - * requiring several transactions only as long as the transfer size does - * not require more than a single qTD. - */ - if (length > usb_maxpacket(dev, pipe)) { - printf("%s: Interrupt transfers requiring several " - "transactions are not supported.\n", __func__); - return -1; - } - queue = create_int_queue(dev, pipe, 1, length, buffer); + if (!queue) + return -1; timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); while ((backbuffer = poll_int_queue(dev, queue)) == NULL) @@ -1406,9 +1417,6 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, return -EINVAL; } - invalidate_dcache_range((uint32_t)buffer, - ALIGN_END_ADDR(char, buffer, length)); - ret = destroy_int_queue(dev, queue); if (ret < 0) return ret; diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c index 0d1a726d35..7fe79efc17 100644 --- a/drivers/usb/host/ehci-rmobile.c +++ b/drivers/usb/host/ehci-rmobile.c @@ -13,22 +13,18 @@ #include "ehci.h" #if defined(CONFIG_R8A7740) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { +static u32 usb_base_address[] = { 0xC6700000 }; #elif defined(CONFIG_R8A7790) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { +static u32 usb_base_address[] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0A0000, /* USB1 */ 0xEE0C0000, /* USB2 */ }; -#elif defined(CONFIG_R8A7791) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { - 0xEE080000, /* USB0 (EHCI) */ - 0xEE0C0000, /* USB1 */ -}; -#elif defined(CONFIG_R8A7794) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { +#elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \ + defined(CONFIG_R8A7794) +static u32 usb_base_address[] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0C0000, /* USB1 */ }; @@ -57,7 +53,7 @@ int ehci_hcd_stop(int index) if (!i) printf("error : ehci(%d) reset failed.\n", index); - if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1)) + if (index == (ARRAY_SIZE(usb_base_address) - 1)) setbits_le32(SMSTPCR7, SMSTPCR703); return 0; diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 23617b7adc..cc9a8fa71e 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -10,16 +10,14 @@ */ #include <asm/arch/clock.h> +#include <asm/arch/cpu.h> #include <asm/gpio.h> #include <asm/io.h> #include <common.h> #include "ehci.h" -#define SUNXI_USB1_IO_BASE 0x01c14000 -#define SUNXI_USB2_IO_BASE 0x01c1c000 - #define SUNXI_USB_PMU_IRQ_ENABLE 0x800 -#define SUNXI_USB_CSR 0x01c13404 +#define SUNXI_USB_CSR 0x404 #define SUNXI_USB_PASSBY_EN 1 #define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10) @@ -32,25 +30,28 @@ static struct sunxi_ehci_hcd { int usb_rst_mask; int ahb_clk_mask; int gpio_vbus; - void *csr; int irq; int id; } sunxi_echi_hcd[] = { { - .usb_rst_mask = CCM_USB_CTRL_PHY1_RST, + .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0, - .gpio_vbus = CONFIG_SUNXI_USB_VBUS0_GPIO, - .csr = (void *)SUNXI_USB_CSR, +#ifndef CONFIG_MACH_SUN6I .irq = 39, +#else + .irq = 72, +#endif .id = 1, }, #if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) { - .usb_rst_mask = CCM_USB_CTRL_PHY2_RST, + .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK, .ahb_clk_mask = 1 << AHB_GATE_OFFSET_USB_EHCI1, - .gpio_vbus = CONFIG_SUNXI_USB_VBUS1_GPIO, - .csr = (void *)SUNXI_USB_CSR, +#ifndef CONFIG_MACH_SUN6I .irq = 40, +#else + .irq = 74, +#endif .id = 2, } #endif @@ -60,19 +61,32 @@ static int enabled_hcd_count; static void *get_io_base(int hcd_id) { - if (hcd_id == 1) - return (void *)SUNXI_USB1_IO_BASE; - else if (hcd_id == 2) - return (void *)SUNXI_USB2_IO_BASE; - else + switch (hcd_id) { + case 0: + return (void *)SUNXI_USB0_BASE; + case 1: + return (void *)SUNXI_USB1_BASE; + case 2: + return (void *)SUNXI_USB2_BASE; + default: return NULL; + } +} + +static int get_vbus_gpio(int hcd_id) +{ + switch (hcd_id) { + case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN); + case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN); + } + return -1; } static void usb_phy_write(struct sunxi_ehci_hcd *sunxi_ehci, int addr, int data, int len) { int j = 0, usbc_bit = 0; - void *dest = sunxi_ehci->csr; + void *dest = get_io_base(0) + SUNXI_USB_CSR; usbc_bit = 1 << (sunxi_ehci->id * 2); for (j = 0; j < len; j++) { @@ -105,7 +119,7 @@ static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci) usb_phy_write(sunxi_ehci, 0x20, 0x14, 5); /* threshold adjustment disconnect */ -#ifdef CONFIG_SUN4I +#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I usb_phy_write(sunxi_ehci, 0x2a, 3, 2); #else usb_phy_write(sunxi_ehci, 0x2a, 2, 2); @@ -138,22 +152,30 @@ static void sunxi_ehci_enable(struct sunxi_ehci_hcd *sunxi_ehci) setbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask); setbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask); +#ifdef CONFIG_MACH_SUN6I + setbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask); +#endif sunxi_usb_phy_init(sunxi_ehci); sunxi_usb_passby(sunxi_ehci, SUNXI_USB_PASSBY_EN); - gpio_direction_output(sunxi_ehci->gpio_vbus, 1); + if (sunxi_ehci->gpio_vbus != -1) + gpio_direction_output(sunxi_ehci->gpio_vbus, 1); } static void sunxi_ehci_disable(struct sunxi_ehci_hcd *sunxi_ehci) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - gpio_direction_output(sunxi_ehci->gpio_vbus, 0); + if (sunxi_ehci->gpio_vbus != -1) + gpio_direction_output(sunxi_ehci->gpio_vbus, 0); sunxi_usb_passby(sunxi_ehci, !SUNXI_USB_PASSBY_EN); +#ifdef CONFIG_MACH_SUN6I + clrbits_le32(&ccm->ahb_reset0_cfg, sunxi_ehci->ahb_clk_mask); +#endif clrbits_le32(&ccm->ahb_gate0, sunxi_ehci->ahb_clk_mask); clrbits_le32(&ccm->usb_clk_cfg, sunxi_ehci->usb_rst_mask); } @@ -163,11 +185,20 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; + int err; + + sunxi_ehci->gpio_vbus = get_vbus_gpio(sunxi_ehci->id); /* enable common PHY only once */ if (index == 0) setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); + if (sunxi_ehci->gpio_vbus != -1) { + err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); + if (err) + return err; + } + sunxi_ehci_enable(sunxi_ehci); *hccr = get_io_base(sunxi_ehci->id); @@ -188,9 +219,16 @@ int ehci_hcd_stop(int index) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; + int err; sunxi_ehci_disable(sunxi_ehci); + if (sunxi_ehci->gpio_vbus != -1) { + err = gpio_free(sunxi_ehci->gpio_vbus); + if (err) + return err; + } + /* disable common PHY only once, for the last enabled hcd */ if (enabled_hcd_count == 1) clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c new file mode 100644 index 0000000000..77f6c9d9d1 --- /dev/null +++ b/drivers/usb/host/ehci-uniphier.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <usb.h> +#include <asm/arch/ehci-uniphier.h> +#include "ehci.h" + +/* + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, + struct ehci_hcor **hcor) +{ + struct ehci_hccr *cr; + struct ehci_hcor *or; + + uniphier_ehci_reset(index, 0); + + cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base); + or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase)); + + *hccr = cr; + *hcor = or; + + return 0; +} + +int ehci_hcd_stop(int index) +{ + uniphier_ehci_reset(index, 1); + + return 0; +} diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 433e703da8..79aecd414e 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -47,9 +47,9 @@ struct ehci_hcor { uint32_t or_usbcmd; #define CMD_PARK (1 << 11) /* enable "park" */ #define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */ -#define CMD_ASE (1 << 5) /* async schedule enable */ #define CMD_LRESET (1 << 7) /* partial reset */ -#define CMD_IAAD (1 << 5) /* "doorbell" interrupt */ +#define CMD_IAAD (1 << 6) /* "doorbell" interrupt */ +#define CMD_ASE (1 << 5) /* async schedule enable */ #define CMD_PSE (1 << 4) /* periodic schedule enable */ #define CMD_RESET (1 << 1) /* reset HC not bus */ #define CMD_RUN (1 << 0) /* start/stop HC */ |