diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/core/lists.c | 10 | ||||
| -rw-r--r-- | drivers/core/root.c | 2 | ||||
| -rw-r--r-- | drivers/gpio/tegra_gpio.c | 327 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 7 | ||||
| -rw-r--r-- | drivers/serial/ns16550.c | 203 | ||||
| -rw-r--r-- | drivers/serial/sandbox.c | 140 | ||||
| -rw-r--r-- | drivers/serial/serial-uclass.c | 213 | ||||
| -rw-r--r-- | drivers/serial/serial.c | 1 | ||||
| -rw-r--r-- | drivers/serial/serial_ns16550.c | 14 | ||||
| -rw-r--r-- | drivers/serial/serial_tegra.c | 38 |
10 files changed, 838 insertions, 117 deletions
diff --git a/drivers/core/lists.c b/drivers/core/lists.c index 0f08bfd6ff..699f94b435 100644 --- a/drivers/core/lists.c +++ b/drivers/core/lists.c @@ -118,7 +118,8 @@ static int driver_check_compatible(const void *blob, int offset, return -ENOENT; } -int lists_bind_fdt(struct udevice *parent, const void *blob, int offset) +int lists_bind_fdt(struct udevice *parent, const void *blob, int offset, + struct udevice **devp) { struct driver *driver = ll_entry_start(struct driver, driver); const int n_ents = ll_entry_count(struct driver, driver); @@ -130,6 +131,8 @@ int lists_bind_fdt(struct udevice *parent, const void *blob, int offset) int ret = 0; dm_dbg("bind node %s\n", fdt_get_name(blob, offset, NULL)); + if (devp) + *devp = NULL; for (entry = driver; entry != driver + n_ents; entry++) { ret = driver_check_compatible(blob, offset, entry->of_match); name = fdt_get_name(blob, offset, NULL); @@ -149,10 +152,11 @@ int lists_bind_fdt(struct udevice *parent, const void *blob, int offset) ret = device_bind(parent, entry, name, NULL, offset, &dev); if (ret) { dm_warn("Error binding driver '%s'\n", entry->name); - if (!result || ret != -ENOENT) - result = ret; + return ret; } else { found = true; + if (devp) + *devp = dev; } break; } diff --git a/drivers/core/root.c b/drivers/core/root.c index 393dd98b9d..a328a4876f 100644 --- a/drivers/core/root.c +++ b/drivers/core/root.c @@ -91,7 +91,7 @@ int dm_scan_fdt_node(struct udevice *parent, const void *blob, int offset, if (pre_reloc_only && !fdt_getprop(blob, offset, "u-boot,dm-pre-reloc", NULL)) continue; - err = lists_bind_fdt(parent, blob, offset); + err = lists_bind_fdt(parent, blob, offset, NULL); if (err && !ret) ret = err; } diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c index fea9d17f8e..1cc4abb8a9 100644 --- a/drivers/gpio/tegra_gpio.c +++ b/drivers/gpio/tegra_gpio.c @@ -12,10 +12,17 @@ */ #include <common.h> +#include <dm.h> +#include <malloc.h> +#include <errno.h> +#include <fdtdec.h> #include <asm/io.h> #include <asm/bitops.h> #include <asm/arch/tegra.h> #include <asm/gpio.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; enum { TEGRA_CMD_INFO, @@ -24,14 +31,18 @@ enum { TEGRA_CMD_INPUT, }; -static struct gpio_names { - char name[GPIO_NAME_SIZE]; -} gpio_names[MAX_NUM_GPIOS]; +struct tegra_gpio_platdata { + struct gpio_ctlr_bank *bank; + const char *port_name; /* Name of port, e.g. "B" */ + int base_gpio; /* Port number for this port (0, 1,.., n-1) */ +}; -static char *get_name(int i) -{ - return *gpio_names[i].name ? gpio_names[i].name : "UNKNOWN"; -} +/* Information about each port at run-time */ +struct tegra_port_info { + char label[TEGRA_GPIOS_PER_PORT][GPIO_NAME_SIZE]; + struct gpio_ctlr_bank *bank; + int base_gpio; /* Port number for this port (0, 1,.., n-1) */ +}; /* Return config of pin 'gpio' as GPIO (1) or SFPIO (0) */ static int get_config(unsigned gpio) @@ -121,38 +132,72 @@ static void set_level(unsigned gpio, int high) writel(u, &bank->gpio_out[GPIO_PORT(gpio)]); } +static int check_reserved(struct udevice *dev, unsigned offset, + const char *func) +{ + struct tegra_port_info *state = dev_get_priv(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + if (!*state->label[offset]) { + printf("tegra_gpio: %s: error: gpio %s%d not reserved\n", + func, uc_priv->bank_name, offset); + return -EBUSY; + } + + return 0; +} + +/* set GPIO pin 'gpio' as an output, with polarity 'value' */ +int tegra_spl_gpio_direction_output(int gpio, int value) +{ + /* Configure as a GPIO */ + set_config(gpio, 1); + + /* Configure GPIO output value. */ + set_level(gpio, value); + + /* Configure GPIO direction as output. */ + set_direction(gpio, 1); + + return 0; +} + /* * Generic_GPIO primitives. */ -int gpio_request(unsigned gpio, const char *label) +static int tegra_gpio_request(struct udevice *dev, unsigned offset, + const char *label) { - if (gpio >= MAX_NUM_GPIOS) - return -1; + struct tegra_port_info *state = dev_get_priv(dev); - if (label != NULL) { - strncpy(gpio_names[gpio].name, label, GPIO_NAME_SIZE); - gpio_names[gpio].name[GPIO_NAME_SIZE - 1] = '\0'; - } + if (*state->label[offset]) + return -EBUSY; + + strncpy(state->label[offset], label, GPIO_NAME_SIZE); + state->label[offset][GPIO_NAME_SIZE - 1] = '\0'; /* Configure as a GPIO */ - set_config(gpio, 1); + set_config(state->base_gpio + offset, 1); return 0; } -int gpio_free(unsigned gpio) +static int tegra_gpio_free(struct udevice *dev, unsigned offset) { - if (gpio >= MAX_NUM_GPIOS) - return -1; + struct tegra_port_info *state = dev_get_priv(dev); + int ret; + + ret = check_reserved(dev, offset, __func__); + if (ret) + return ret; + state->label[offset][0] = '\0'; - gpio_names[gpio].name[0] = '\0'; - /* Do not configure as input or change pin mux here */ return 0; } /* read GPIO OUT value of pin 'gpio' */ -static int gpio_get_output_value(unsigned gpio) +static int tegra_gpio_get_output_value(unsigned gpio) { struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)]; @@ -166,24 +211,34 @@ static int gpio_get_output_value(unsigned gpio) return (val >> GPIO_BIT(gpio)) & 1; } + /* set GPIO pin 'gpio' as an input */ -int gpio_direction_input(unsigned gpio) +static int tegra_gpio_direction_input(struct udevice *dev, unsigned offset) { - debug("gpio_direction_input: pin = %d (port %d:bit %d)\n", - gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio)); + struct tegra_port_info *state = dev_get_priv(dev); + int ret; + + ret = check_reserved(dev, offset, __func__); + if (ret) + return ret; /* Configure GPIO direction as input. */ - set_direction(gpio, 0); + set_direction(state->base_gpio + offset, 0); return 0; } /* set GPIO pin 'gpio' as an output, with polarity 'value' */ -int gpio_direction_output(unsigned gpio, int value) +static int tegra_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) { - debug("gpio_direction_output: pin = %d (port %d:bit %d) = %s\n", - gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), - value ? "HIGH" : "LOW"); + struct tegra_port_info *state = dev_get_priv(dev); + int gpio = state->base_gpio + offset; + int ret; + + ret = check_reserved(dev, offset, __func__); + if (ret) + return ret; /* Configure GPIO output value. */ set_level(gpio, value); @@ -195,25 +250,38 @@ int gpio_direction_output(unsigned gpio, int value) } /* read GPIO IN value of pin 'gpio' */ -int gpio_get_value(unsigned gpio) +static int tegra_gpio_get_value(struct udevice *dev, unsigned offset) { - struct gpio_ctlr *ctlr = (struct gpio_ctlr *)NV_PA_GPIO_BASE; - struct gpio_ctlr_bank *bank = &ctlr->gpio_bank[GPIO_BANK(gpio)]; + struct tegra_port_info *state = dev_get_priv(dev); + int gpio = state->base_gpio + offset; + int ret; int val; - debug("gpio_get_value: pin = %d (port %d:bit %d)\n", - gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio)); + ret = check_reserved(dev, offset, __func__); + if (ret) + return ret; + + debug("%s: pin = %d (port %d:bit %d)\n", __func__, + gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio)); - val = readl(&bank->gpio_in[GPIO_PORT(gpio)]); + val = readl(&state->bank->gpio_in[GPIO_PORT(gpio)]); return (val >> GPIO_BIT(gpio)) & 1; } /* write GPIO OUT value to pin 'gpio' */ -int gpio_set_value(unsigned gpio, int value) +static int tegra_gpio_set_value(struct udevice *dev, unsigned offset, int value) { + struct tegra_port_info *state = dev_get_priv(dev); + int gpio = state->base_gpio + offset; + int ret; + + ret = check_reserved(dev, offset, __func__); + if (ret) + return ret; + debug("gpio_set_value: pin = %d (port %d:bit %d), value = %d\n", - gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), value); + gpio, GPIO_FULLPORT(gpio), GPIO_BIT(gpio), value); /* Configure GPIO output value. */ set_level(gpio, value); @@ -241,26 +309,175 @@ void gpio_config_table(const struct tegra_gpio_config *config, int len) } } -/* - * Display Tegra GPIO information +static int tegra_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct tegra_port_info *state = dev_get_priv(dev); + int gpio = state->base_gpio + offset; + + if (!*state->label[offset]) + return GPIOF_UNUSED; + if (!get_config(gpio)) + return GPIOF_FUNC; + else if (get_direction(gpio)) + return GPIOF_OUTPUT; + else + return GPIOF_INPUT; +} + +static int tegra_gpio_get_state(struct udevice *dev, unsigned int offset, + char *buf, int bufsize) +{ + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + struct tegra_port_info *state = dev_get_priv(dev); + int gpio = state->base_gpio + offset; + const char *label; + int is_output; + int is_gpio; + int size; + + label = state->label[offset]; + is_gpio = get_config(gpio); /* GPIO, not SFPIO */ + size = snprintf(buf, bufsize, "%s%d: ", + uc_priv->bank_name ? uc_priv->bank_name : "", offset); + buf += size; + bufsize -= size; + if (is_gpio) { + is_output = get_direction(gpio); + + snprintf(buf, bufsize, "%s: %d [%c]%s%s", + is_output ? "out" : " in", + is_output ? + tegra_gpio_get_output_value(gpio) : + tegra_gpio_get_value(dev, offset), + *label ? 'x' : ' ', + *label ? " " : "", + label); + } else { + snprintf(buf, bufsize, "sfpio"); + } + + return 0; +} + +static const struct dm_gpio_ops gpio_tegra_ops = { + .request = tegra_gpio_request, + .free = tegra_gpio_free, + .direction_input = tegra_gpio_direction_input, + .direction_output = tegra_gpio_direction_output, + .get_value = tegra_gpio_get_value, + .set_value = tegra_gpio_set_value, + .get_function = tegra_gpio_get_function, + .get_state = tegra_gpio_get_state, +}; + +/** + * Returns the name of a GPIO port + * + * GPIOs are named A, B, C, ..., Z, AA, BB, CC, ... + * + * @base_port: Base port number (0, 1..n-1) + * @return allocated string containing the name */ -void gpio_info(void) +static char *gpio_port_name(int base_port) { - unsigned c; - int type; + char *name, *s; + + name = malloc(3); + if (name) { + s = name; + *s++ = 'A' + (base_port % 26); + if (base_port >= 26) + *s++ = *name; + *s = '\0'; + } - for (c = 0; c < MAX_NUM_GPIOS; c++) { - type = get_config(c); /* GPIO, not SFPIO */ - if (type) { - printf("GPIO_%d:\t%s is an %s, ", c, - get_name(c), - get_direction(c) ? "OUTPUT" : "INPUT"); - if (get_direction(c)) - printf("value = %d", gpio_get_output_value(c)); - else - printf("value = %d", gpio_get_value(c)); - printf("\n"); - } else - continue; + return name; +} + +static const struct udevice_id tegra_gpio_ids[] = { + { .compatible = "nvidia,tegra30-gpio" }, + { .compatible = "nvidia,tegra20-gpio" }, + { } +}; + +static int gpio_tegra_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + struct tegra_port_info *priv = dev->priv; + struct tegra_gpio_platdata *plat = dev->platdata; + + /* Only child devices have ports */ + if (!plat) + return 0; + + priv->bank = plat->bank; + priv->base_gpio = plat->base_gpio; + + uc_priv->gpio_count = TEGRA_GPIOS_PER_PORT; + uc_priv->bank_name = plat->port_name; + + return 0; +} + +/** + * We have a top-level GPIO device with no actual GPIOs. It has a child + * device for each Tegra port. + */ +static int gpio_tegra_bind(struct udevice *parent) +{ + struct tegra_gpio_platdata *plat = parent->platdata; + struct gpio_ctlr *ctlr; + int bank_count; + int bank; + int ret; + int len; + + /* If this is a child device, there is nothing to do here */ + if (plat) + return 0; + + /* + * This driver does not make use of interrupts, other than to figure + * out the number of GPIO banks + */ + if (!fdt_getprop(gd->fdt_blob, parent->of_offset, "interrupts", &len)) + return -EINVAL; + bank_count = len / 3 / sizeof(u32); + ctlr = (struct gpio_ctlr *)fdtdec_get_addr(gd->fdt_blob, + parent->of_offset, "reg"); + for (bank = 0; bank < bank_count; bank++) { + int port; + + for (port = 0; port < TEGRA_PORTS_PER_BANK; port++) { + struct tegra_gpio_platdata *plat; + struct udevice *dev; + int base_port; + + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + plat->bank = &ctlr->gpio_bank[bank]; + base_port = bank * TEGRA_PORTS_PER_BANK + port; + plat->base_gpio = TEGRA_GPIOS_PER_PORT * base_port; + plat->port_name = gpio_port_name(base_port); + + ret = device_bind(parent, parent->driver, + plat->port_name, plat, -1, &dev); + if (ret) + return ret; + dev->of_offset = parent->of_offset; + } } + + return 0; } + +U_BOOT_DRIVER(gpio_tegra) = { + .name = "gpio_tegra", + .id = UCLASS_GPIO, + .of_match = tegra_gpio_ids, + .bind = gpio_tegra_bind, + .probe = gpio_tegra_probe, + .priv_auto_alloc_size = sizeof(struct tegra_port_info), + .ops = &gpio_tegra_ops, +}; diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 571c18fa93..853a8c6919 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -5,7 +5,12 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifdef CONFIG_DM_SERIAL +obj-y += serial-uclass.o +else obj-y += serial.o +obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o +endif obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o @@ -16,7 +21,6 @@ obj-$(CONFIG_MCFUART) += mcfuart.o obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o obj-$(CONFIG_SYS_NS16550) += ns16550.o obj-$(CONFIG_S5P) += serial_s5p.o -obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o obj-$(CONFIG_IMX_SERIAL) += serial_imx.o obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o @@ -34,6 +38,7 @@ obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o obj-$(CONFIG_MXS_AUART) += mxs_auart.o obj-$(CONFIG_ARC_SERIAL) += serial_arc.o +obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 079f67d380..63a9ef6844 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -4,18 +4,26 @@ * modified to use CONFIG_SYS_ISA_MEM and new defines */ -#include <config.h> +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> #include <ns16550.h> +#include <serial.h> #include <watchdog.h> #include <linux/types.h> #include <asm/io.h> +DECLARE_GLOBAL_DATA_PTR; + #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ #define UART_MCRVAL (UART_MCR_DTR | \ UART_MCR_RTS) /* RTS/DTR */ #define UART_FCRVAL (UART_FCR_FIFO_EN | \ UART_FCR_RXSR | \ UART_FCR_TXSR) /* Clear & enable FIFOs */ + +#ifndef CONFIG_DM_SERIAL #ifdef CONFIG_SYS_NS16550_PORT_MAPPED #define serial_out(x, y) outb(x, (ulong)y) #define serial_in(y) inb((ulong)y) @@ -29,6 +37,7 @@ #define serial_out(x, y) writeb(x, y) #define serial_in(y) readb(y) #endif +#endif /* !CONFIG_DM_SERIAL */ #if defined(CONFIG_SOC_KEYSTONE) #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 @@ -45,6 +54,82 @@ #define CONFIG_SYS_NS16550_IER 0x00 #endif /* CONFIG_SYS_NS16550_IER */ +#ifdef CONFIG_DM_SERIAL +static void ns16550_writeb(NS16550_t port, int offset, int value) +{ + struct ns16550_platdata *plat = port->plat; + unsigned char *addr; + + offset *= 1 << plat->reg_shift; + addr = plat->base + offset; + /* + * As far as we know it doesn't make sense to support selection of + * these options at run-time, so use the existing CONFIG options. + */ +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED + outb(value, addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) + out_le32(addr, value); +#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) + out_be32(addr, value); +#elif defined(CONFIG_SYS_BIG_ENDIAN) + writeb(value, addr + (1 << plat->reg_shift) - 1); +#else + writeb(value, addr); +#endif +} + +static int ns16550_readb(NS16550_t port, int offset) +{ + struct ns16550_platdata *plat = port->plat; + unsigned char *addr; + + offset *= 1 << plat->reg_shift; + addr = plat->base + offset; +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED + return inb(addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) + return in_le32(addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) + return in_be32(addr); +#elif defined(CONFIG_SYS_BIG_ENDIAN) + return readb(addr + (1 << plat->reg_shift) - 1); +#else + return readb(addr); +#endif +} + +/* We can clean these up once everything is moved to driver model */ +#define serial_out(value, addr) \ + ns16550_writeb(com_port, addr - (unsigned char *)com_port, value) +#define serial_in(addr) \ + ns16550_readb(com_port, addr - (unsigned char *)com_port) +#endif + +int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) +{ + const unsigned int mode_x_div = 16; + +#ifdef CONFIG_OMAP1510 + /* If can't cleanly clock 115200 set div to 1 */ + if ((clock == 12000000) && (baudrate == 115200)) { + port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */ + return 1; /* return 1 for base divisor */ + } + port->osc_12m_sel = 0; /* clear if previsouly set */ +#endif + + return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); +} + +static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) +{ + serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); + serial_out(baud_divisor & 0xff, &com_port->dll); + serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); + serial_out(UART_LCRVAL, &com_port->lcr); +} + void NS16550_init(NS16550_t com_port, int baud_divisor) { #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX)) @@ -55,10 +140,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) */ if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) == UART_LSR_THRE) { - serial_out(UART_LCR_DLAB, &com_port->lcr); - serial_out(baud_divisor & 0xff, &com_port->dll); - serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + if (baud_divisor != -1) + NS16550_setbrg(com_port, baud_divisor); serial_out(0, &com_port->mdr1); } #endif @@ -71,16 +154,11 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); - serial_out(0, &com_port->dll); - serial_out(0, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, 0); serial_out(UART_MCRVAL, &com_port->mcr); serial_out(UART_FCRVAL, &com_port->fcr); - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); - serial_out(baud_divisor & 0xff, &com_port->dll); - serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + if (baud_divisor != -1) + NS16550_setbrg(com_port, baud_divisor); #if defined(CONFIG_OMAP) || \ defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) @@ -97,16 +175,10 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) void NS16550_reinit(NS16550_t com_port, int baud_divisor) { serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); - serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); - serial_out(0, &com_port->dll); - serial_out(0, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, 0); serial_out(UART_MCRVAL, &com_port->mcr); serial_out(UART_FCRVAL, &com_port->fcr); - serial_out(UART_LCR_BKSE, &com_port->lcr); - serial_out(baud_divisor & 0xff, &com_port->dll); - serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); - serial_out(UART_LCRVAL, &com_port->lcr); + NS16550_setbrg(com_port, baud_divisor); } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ @@ -145,3 +217,92 @@ int NS16550_tstc(NS16550_t com_port) } #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ + +#ifdef CONFIG_DM_SERIAL +static int ns16550_serial_putc(struct udevice *dev, const char ch) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + + if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) + return -EAGAIN; + serial_out(ch, &com_port->thr); + + /* + * Call watchdog_reset() upon newline. This is done here in putc + * since the environment code uses a single puts() to print the complete + * environment upon "printenv". So we can't put this watchdog call + * in puts(). + */ + if (ch == '\n') + WATCHDOG_RESET(); + + return 0; +} + +static int ns16550_serial_pending(struct udevice *dev, bool input) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + + if (input) + return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0; + else + return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1; +} + +static int ns16550_serial_getc(struct udevice *dev) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + + if (!serial_in(&com_port->lsr) & UART_LSR_DR) + return -EAGAIN; + + return serial_in(&com_port->rbr); +} + +static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + struct ns16550_platdata *plat = com_port->plat; + int clock_divisor; + + clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); + + NS16550_setbrg(com_port, clock_divisor); + + return 0; +} + +int ns16550_serial_probe(struct udevice *dev) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + + NS16550_init(com_port, -1); + + return 0; +} + +int ns16550_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct NS16550 *const com_port = dev_get_priv(dev); + struct ns16550_platdata *plat = dev->platdata; + fdt_addr_t addr; + + addr = fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg"); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + plat->base = (unsigned char *)addr; + plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "reg-shift", 1); + com_port->plat = plat; + + return 0; +} + +const struct dm_serial_ops ns16550_serial_ops = { + .putc = ns16550_serial_putc, + .pending = ns16550_serial_pending, + .getc = ns16550_serial_getc, + .setbrg = ns16550_serial_setbrg, +}; +#endif /* CONFIG_DM_SERIAL */ diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index 51fd871dff..cd2f91e28e 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -11,12 +11,16 @@ */ #include <common.h> +#include <dm.h> +#include <fdtdec.h> #include <lcd.h> #include <os.h> #include <serial.h> #include <linux/compiler.h> #include <asm/state.h> +DECLARE_GLOBAL_DATA_PTR; + /* * * serial_buf: A buffer that holds keyboard characters for the @@ -30,27 +34,69 @@ static char serial_buf[16]; static unsigned int serial_buf_write; static unsigned int serial_buf_read; -static int sandbox_serial_init(void) +struct sandbox_serial_platdata { + int colour; /* Text colour to use for output, -1 for none */ +}; + +struct sandbox_serial_priv { + bool start_of_line; +}; + +/** + * output_ansi_colour() - Output an ANSI colour code + * + * @colour: Colour to output (0-7) + */ +static void output_ansi_colour(int colour) +{ + char ansi_code[] = "\x1b[1;3Xm"; + + ansi_code[5] = '0' + colour; + os_write(1, ansi_code, sizeof(ansi_code) - 1); +} + +static void output_ansi_reset(void) +{ + os_write(1, "\x1b[0m", 4); +} + +static int sandbox_serial_probe(struct udevice *dev) { struct sandbox_state *state = state_get_current(); + struct sandbox_serial_priv *priv = dev_get_priv(dev); if (state->term_raw != STATE_TERM_COOKED) os_tty_raw(0, state->term_raw == STATE_TERM_RAW_WITH_SIGS); + priv->start_of_line = 0; + return 0; } -static void sandbox_serial_setbrg(void) +static int sandbox_serial_remove(struct udevice *dev) { + struct sandbox_serial_platdata *plat = dev->platdata; + + if (plat->colour != -1) + output_ansi_reset(); + + return 0; } -static void sandbox_serial_putc(const char ch) +static int sandbox_serial_putc(struct udevice *dev, const char ch) { + struct sandbox_serial_priv *priv = dev_get_priv(dev); + struct sandbox_serial_platdata *plat = dev->platdata; + + if (priv->start_of_line && plat->colour != -1) { + priv->start_of_line = false; + output_ansi_colour(plat->colour); + } + os_write(1, &ch, 1); -} + if (ch == '\n') + priv->start_of_line = true; -static void sandbox_serial_puts(const char *str) -{ - os_write(1, str, strlen(str)); + return 0; } static unsigned int increment_buffer_index(unsigned int index) @@ -58,12 +104,15 @@ static unsigned int increment_buffer_index(unsigned int index) return (index + 1) % ARRAY_SIZE(serial_buf); } -static int sandbox_serial_tstc(void) +static int sandbox_serial_pending(struct udevice *dev, bool input) { const unsigned int next_index = increment_buffer_index(serial_buf_write); ssize_t count; + if (!input) + return 0; + os_usleep(100); #ifdef CONFIG_LCD lcd_sync(); @@ -74,38 +123,77 @@ static int sandbox_serial_tstc(void) count = os_read_no_block(0, &serial_buf[serial_buf_write], 1); if (count == 1) serial_buf_write = next_index; + return serial_buf_write != serial_buf_read; } -static int sandbox_serial_getc(void) +static int sandbox_serial_getc(struct udevice *dev) { int result; - while (!sandbox_serial_tstc()) - ; /* buffer empty */ + if (!sandbox_serial_pending(dev, true)) + return -EAGAIN; /* buffer empty */ result = serial_buf[serial_buf_read]; serial_buf_read = increment_buffer_index(serial_buf_read); return result; } -static struct serial_device sandbox_serial_drv = { - .name = "sandbox_serial", - .start = sandbox_serial_init, - .stop = NULL, - .setbrg = sandbox_serial_setbrg, - .putc = sandbox_serial_putc, - .puts = sandbox_serial_puts, - .getc = sandbox_serial_getc, - .tstc = sandbox_serial_tstc, +static const char * const ansi_colour[] = { + "black", "red", "green", "yellow", "blue", "megenta", "cyan", + "white", }; -void sandbox_serial_initialize(void) +static int sandbox_serial_ofdata_to_platdata(struct udevice *dev) { - serial_register(&sandbox_serial_drv); -} + struct sandbox_serial_platdata *plat = dev->platdata; + const char *colour; + int i; + + plat->colour = -1; + colour = fdt_getprop(gd->fdt_blob, dev->of_offset, + "sandbox,text-colour", NULL); + if (colour) { + for (i = 0; i < ARRAY_SIZE(ansi_colour); i++) { + if (!strcmp(colour, ansi_colour[i])) { + plat->colour = i; + break; + } + } + } -__weak struct serial_device *default_serial_console(void) -{ - return &sandbox_serial_drv; + return 0; } + +static const struct dm_serial_ops sandbox_serial_ops = { + .putc = sandbox_serial_putc, + .pending = sandbox_serial_pending, + .getc = sandbox_serial_getc, +}; + +static const struct udevice_id sandbox_serial_ids[] = { + { .compatible = "sandbox,serial" }, + { } +}; + +U_BOOT_DRIVER(serial_sandbox) = { + .name = "serial_sandbox", + .id = UCLASS_SERIAL, + .of_match = sandbox_serial_ids, + .ofdata_to_platdata = sandbox_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct sandbox_serial_platdata), + .priv_auto_alloc_size = sizeof(struct sandbox_serial_priv), + .probe = sandbox_serial_probe, + .remove = sandbox_serial_remove, + .ops = &sandbox_serial_ops, + .flags = DM_FLAG_PRE_RELOC, +}; + +static const struct sandbox_serial_platdata platdata_non_fdt = { + .colour = -1, +}; + +U_BOOT_DEVICE(serial_sandbox_non_fdt) = { + .name = "serial_sandbox", + .platdata = &platdata_non_fdt, +}; diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c new file mode 100644 index 0000000000..d04104e747 --- /dev/null +++ b/drivers/serial/serial-uclass.c @@ -0,0 +1,213 @@ +/* + * Copyright (c) 2014 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <os.h> +#include <serial.h> +#include <stdio_dev.h> +#include <dm/lists.h> +#include <dm/device-internal.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* The currently-selected console serial device */ +struct udevice *cur_dev __attribute__ ((section(".data"))); + +#ifndef CONFIG_SYS_MALLOC_F_LEN +#error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work" +#endif + +static void serial_find_console_or_panic(void) +{ + int node; + + /* Check for a chosen console */ + node = fdtdec_get_chosen_node(gd->fdt_blob, "stdout-path"); + if (node < 0) + node = fdtdec_get_alias_node(gd->fdt_blob, "console"); + if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, &cur_dev)) + return; + + /* + * If the console is not marked to be bound before relocation, bind + * it anyway. + */ + if (node > 0 && + !lists_bind_fdt(gd->dm_root, gd->fdt_blob, node, &cur_dev)) { + if (!device_probe(cur_dev)) + return; + cur_dev = NULL; + } + + /* + * Failing that, get the device with sequence number 0, or in extremis + * just the first serial device we can find. But we insist on having + * a console (even if it is silent). + */ + if (uclass_get_device_by_seq(UCLASS_SERIAL, 0, &cur_dev) && + (uclass_first_device(UCLASS_SERIAL, &cur_dev) || !cur_dev)) + panic("No serial driver found"); +} + +/* Called prior to relocation */ +int serial_init(void) +{ + serial_find_console_or_panic(); + gd->flags |= GD_FLG_SERIAL_READY; + + return 0; +} + +/* Called after relocation */ +void serial_initialize(void) +{ + serial_find_console_or_panic(); +} + +void serial_putc(char ch) +{ + struct dm_serial_ops *ops = serial_get_ops(cur_dev); + int err; + + do { + err = ops->putc(cur_dev, ch); + } while (err == -EAGAIN); + if (ch == '\n') + serial_putc('\r'); +} + +void serial_setbrg(void) +{ + struct dm_serial_ops *ops = serial_get_ops(cur_dev); + + if (ops->setbrg) + ops->setbrg(cur_dev, gd->baudrate); +} + +void serial_puts(const char *str) +{ + while (*str) + serial_putc(*str++); +} + +int serial_tstc(void) +{ + struct dm_serial_ops *ops = serial_get_ops(cur_dev); + + if (ops->pending) + return ops->pending(cur_dev, true); + + return 1; +} + +int serial_getc(void) +{ + struct dm_serial_ops *ops = serial_get_ops(cur_dev); + int err; + + do { + err = ops->getc(cur_dev); + } while (err == -EAGAIN); + + return err >= 0 ? err : 0; +} + +void serial_stdio_init(void) +{ +} + +void serial_stub_putc(struct stdio_dev *sdev, const char ch) +{ + struct udevice *dev = sdev->priv; + struct dm_serial_ops *ops = serial_get_ops(dev); + + ops->putc(dev, ch); +} + +void serial_stub_puts(struct stdio_dev *sdev, const char *str) +{ + while (*str) + serial_stub_putc(sdev, *str++); +} + +int serial_stub_getc(struct stdio_dev *sdev) +{ + struct udevice *dev = sdev->priv; + struct dm_serial_ops *ops = serial_get_ops(dev); + + int err; + + do { + err = ops->getc(dev); + } while (err == -EAGAIN); + + return err >= 0 ? err : 0; +} + +int serial_stub_tstc(struct stdio_dev *sdev) +{ + struct udevice *dev = sdev->priv; + struct dm_serial_ops *ops = serial_get_ops(dev); + + if (ops->pending) + return ops->pending(dev, true); + + return 1; +} + +static int serial_post_probe(struct udevice *dev) +{ + struct stdio_dev sdev; + struct dm_serial_ops *ops = serial_get_ops(dev); + struct serial_dev_priv *upriv = dev->uclass_priv; + int ret; + + /* Set the baud rate */ + if (ops->setbrg) { + ret = ops->setbrg(dev, gd->baudrate); + if (ret) + return ret; + } + + if (!(gd->flags & GD_FLG_RELOC)) + return 0; + + memset(&sdev, '\0', sizeof(sdev)); + + strncpy(sdev.name, dev->name, sizeof(sdev.name)); + sdev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT; + sdev.priv = dev; + sdev.putc = serial_stub_putc; + sdev.puts = serial_stub_puts; + sdev.getc = serial_stub_getc; + sdev.tstc = serial_stub_tstc; + stdio_register_dev(&sdev, &upriv->sdev); + + return 0; +} + +static int serial_pre_remove(struct udevice *dev) +{ +#ifdef CONFIG_SYS_STDIO_DEREGISTER + struct serial_dev_priv *upriv = dev->uclass_priv; + + if (stdio_deregister_dev(upriv->sdev)) + return -EPERM; +#endif + + return 0; +} + +UCLASS_DRIVER(serial) = { + .id = UCLASS_SERIAL, + .name = "serial", + .post_probe = serial_post_probe, + .pre_remove = serial_pre_remove, + .per_device_auto_alloc_size = sizeof(struct serial_dev_priv), +}; diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index d2eb7520d0..bbe60af627 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -320,6 +320,7 @@ void serial_stdio_init(void) dev.puts = serial_stub_puts; dev.getc = serial_stub_getc; dev.tstc = serial_stub_tstc; + dev.priv = s; stdio_register(&dev); diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index dafeed742d..632da4cf70 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -81,7 +81,8 @@ static NS16550_t serial_ports[6] = { static int eserial##port##_init(void) \ { \ int clock_divisor; \ - clock_divisor = calc_divisor(serial_ports[port-1]); \ + clock_divisor = ns16550_calc_divisor(serial_ports[port-1], \ + CONFIG_SYS_NS16550_CLK, gd->baudrate); \ NS16550_init(serial_ports[port-1], clock_divisor); \ return 0 ; \ } \ @@ -118,14 +119,6 @@ static NS16550_t serial_ports[6] = { .puts = eserial##port##_puts, \ } -static int calc_divisor (NS16550_t port) -{ - const unsigned int mode_x_div = 16; - - return DIV_ROUND_CLOSEST(CONFIG_SYS_NS16550_CLK, - mode_x_div * gd->baudrate); -} - void _serial_putc(const char c,const int port) { @@ -167,7 +160,8 @@ _serial_setbrg (const int port) { int clock_divisor; - clock_divisor = calc_divisor(PORT); + clock_divisor = ns16550_calc_divisor(PORT, CONFIG_SYS_NS16550_CLK, + gd->baudrate); NS16550_reinit(PORT, clock_divisor); } diff --git a/drivers/serial/serial_tegra.c b/drivers/serial/serial_tegra.c new file mode 100644 index 0000000000..7eb70e1de1 --- /dev/null +++ b/drivers/serial/serial_tegra.c @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> + +static const struct udevice_id tegra_serial_ids[] = { + { .compatible = "nvidia,tegra20-uart" }, + { } +}; + +static int tegra_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = V_NS16550_CLK; + + return 0; +} +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_tegra20", + .id = UCLASS_SERIAL, + .of_match = tegra_serial_ids, + .ofdata_to_platdata = tegra_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, +}; |