diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/serial/serial_sh.c | 2 | ||||
| -rw-r--r-- | drivers/serial/serial_sh.h | 5 | ||||
| -rw-r--r-- | drivers/serial/serial_uniphier.c | 64 | ||||
| -rw-r--r-- | drivers/usb/host/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/usb/host/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-uniphier.c | 25 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-uniphier.c | 85 |
7 files changed, 144 insertions, 48 deletions
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 3641c9f834..8693c1ed14 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -69,7 +69,7 @@ sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate) if (port->clk_mode == EXT_CLK) { unsigned short dl = DL_VALUE(baudrate, clk); sci_out(port, DL, dl); - /* Need wait: Clock * 1/dl × 1/16 */ + /* Need wait: Clock * 1/dl * 1/16 */ udelay((1000000 * dl * 16 / clk) * 1000 + 1); } else { sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk)); diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index 528aa7351d..941e6eda4c 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -227,7 +227,8 @@ struct uart_port { #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ORER 0x0001 -# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ +# define SCSCR_INIT(port) (port->clk_mode == EXT_CLK ? 0x32 : 0x30) + /* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ #else # error CPU subtype not defined #endif @@ -742,7 +743,7 @@ static inline int scbrr_calc(struct uart_port *port, int bps, int clk) #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) /* Internal Clock */ +#define SCBRR_VALUE(bps, clk) (clk / bps / 32 - 1) /* Internal Clock */ #else /* Generic SH */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index e8a1608b99..a6bd27facf 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation + * Copyright (C) 2012-2015 Panasonic Corporation * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -13,31 +13,25 @@ #include <serial.h> #include <fdtdec.h> -#define UART_REG(x) \ - u8 x; \ - u8 postpad_##x[3]; - /* * Note: Register map is slightly different from that of 16550. */ struct uniphier_serial { - UART_REG(rbr); /* 0x00 */ - UART_REG(ier); /* 0x04 */ - UART_REG(iir); /* 0x08 */ - UART_REG(fcr); /* 0x0c */ - u8 mcr; /* 0x10 */ - u8 lcr; - u16 __postpad; - UART_REG(lsr); /* 0x14 */ - UART_REG(msr); /* 0x18 */ - u32 __none1; - u32 __none2; - u16 dlr; - u16 __postpad2; + u32 rx; /* In: Receive buffer */ +#define tx rx /* Out: Transmit buffer */ + u32 ier; /* Interrupt Enable Register */ + u32 iir; /* In: Interrupt ID Register */ + u32 char_fcr; /* Charactor / FIFO Control Register */ + u32 lcr_mcr; /* Line/Modem Control Register */ +#define LCR_SHIFT 8 +#define LCR_MASK (0xff << (LCR_SHIFT)) + u32 lsr; /* In: Line Status Register */ + u32 msr; /* In: Modem Status Register */ + u32 __rsv0; + u32 __rsv1; + u32 dlr; /* Divisor Latch Register */ }; -#define thr rbr - struct uniphier_serial_private_data { struct uniphier_serial __iomem *membase; }; @@ -52,11 +46,9 @@ static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) const unsigned int mode_x_div = 16; unsigned int divisor; - writeb(UART_LCR_WLEN8, &port->lcr); - divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); - writew(divisor, &port->dlr); + writel(divisor, &port->dlr); return 0; } @@ -65,20 +57,20 @@ static int uniphier_serial_getc(struct udevice *dev) { struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - if (!(readb(&port->lsr) & UART_LSR_DR)) + if (!(readl(&port->lsr) & UART_LSR_DR)) return -EAGAIN; - return readb(&port->rbr); + return readl(&port->rx); } static int uniphier_serial_putc(struct udevice *dev, const char c) { struct uniphier_serial __iomem *port = uniphier_serial_port(dev); - if (!(readb(&port->lsr) & UART_LSR_THRE)) + if (!(readl(&port->lsr) & UART_LSR_THRE)) return -EAGAIN; - writeb(c, &port->thr); + writel(c, &port->tx); return 0; } @@ -88,21 +80,29 @@ static int uniphier_serial_pending(struct udevice *dev, bool input) struct uniphier_serial __iomem *port = uniphier_serial_port(dev); if (input) - return readb(&port->lsr) & UART_LSR_DR; + return readl(&port->lsr) & UART_LSR_DR; else - return !(readb(&port->lsr) & UART_LSR_THRE); + return !(readl(&port->lsr) & UART_LSR_THRE); } static int uniphier_serial_probe(struct udevice *dev) { + u32 tmp; struct uniphier_serial_private_data *priv = dev_get_priv(dev); struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); + struct uniphier_serial __iomem *port; - priv->membase = map_sysmem(plat->base, sizeof(struct uniphier_serial)); - - if (!priv->membase) + port = map_sysmem(plat->base, sizeof(struct uniphier_serial)); + if (!port) return -ENOMEM; + priv->membase = port; + + tmp = readl(&port->lcr_mcr); + tmp &= ~LCR_MASK; + tmp |= UART_LCR_WLEN8 << LCR_SHIFT; + writel(tmp, &port->lcr_mcr); + return 0; } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 30d1457638..24a595fb42 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -17,6 +17,14 @@ config USB_XHCI if USB_XHCI_HCD +config USB_XHCI_UNIPHIER + bool "Support for Panasonic UniPhier on-chip xHCI USB controller" + depends on ARCH_UNIPHIER + default y + ---help--- + Enables support for the on-chip xHCI controller on Panasonic + UniPhier SoCs. + endif config USB_EHCI_HCD @@ -47,7 +55,7 @@ if USB_EHCI_HCD config USB_EHCI_UNIPHIER bool "Support for Panasonic UniPhier on-chip EHCI USB controller" - depends on ARCH_UNIPHIER + depends on ARCH_UNIPHIER && OF_CONTROL default y ---help--- Enables support for the on-chip EHCI controller on Panasonic diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 66d6e9a6d2..eb6f34b53c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o +obj-$(CONFIG_USB_XHCI_UNIPHIER) += xhci-uniphier.o # designware obj-$(CONFIG_USB_DWC2) += dwc2.o diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c index 32a4375279..b5ec296918 100644 --- a/drivers/usb/host/ehci-uniphier.c +++ b/drivers/usb/host/ehci-uniphier.c @@ -7,12 +7,12 @@ #include <common.h> #include <linux/err.h> +#include <asm/io.h> #include <usb.h> -#include <asm/arch/ehci-uniphier.h> +#include <mach/mio-regs.h> +#include <fdtdec.h> #include "ehci.h" -#ifdef CONFIG_OF_CONTROL -#include <fdtdec.h> DECLARE_GLOBAL_DATA_PTR; #define FDT gd->fdt_blob @@ -35,18 +35,19 @@ static int get_uniphier_ehci_base(int index, struct ehci_hccr **base) return -ENODEV; /* not found */ } -#else -static int get_uniphier_ehci_base(int index, struct ehci_hccr **base) + +static void uniphier_ehci_reset(int index, int on) { - *base = (struct ehci_hccr *)uniphier_ehci_platdata[index].base; - return 0; + u32 tmp; + + tmp = readl(MIO_USB_RSTCTRL(index)); + if (on) + tmp &= ~MIO_USB_RSTCTRL_XRST; + else + tmp |= MIO_USB_RSTCTRL_XRST; + writel(tmp, MIO_USB_RSTCTRL(index)); } -#endif -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { diff --git a/drivers/usb/host/xhci-uniphier.c b/drivers/usb/host/xhci-uniphier.c new file mode 100644 index 0000000000..08b15e0ad1 --- /dev/null +++ b/drivers/usb/host/xhci-uniphier.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2015 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <usb.h> +#include <fdtdec.h> +#include "xhci.h" + +static int get_uniphier_xhci_base(int index, struct xhci_hccr **base) +{ + DECLARE_GLOBAL_DATA_PTR; + int node_list[2]; + fdt_addr_t addr; + int count; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "usb", + COMPAT_PANASONIC_XHCI, node_list, + ARRAY_SIZE(node_list)); + + if (index >= count) + return -ENODEV; + + addr = fdtdec_get_addr(gd->fdt_blob, node_list[index], "reg"); + if (addr == FDT_ADDR_T_NONE) + return -ENODEV; + + *base = (struct xhci_hccr *)addr; + + return 0; +} + +#define USB3_RST_CTRL 0x00100040 +#define IOMMU_RST_N (1 << 5) +#define LINK_RST_N (1 << 4) + +static void uniphier_xhci_reset(void __iomem *base, int on) +{ + u32 tmp; + + tmp = readl(base + USB3_RST_CTRL); + + if (on) + tmp &= ~(IOMMU_RST_N | LINK_RST_N); + else + tmp |= IOMMU_RST_N | LINK_RST_N; + + writel(tmp, base + USB3_RST_CTRL); +} + +int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor) +{ + int ret; + struct xhci_hccr *cr; + struct xhci_hcor *or; + + ret = get_uniphier_xhci_base(index, &cr); + if (ret < 0) + return ret; + + uniphier_xhci_reset(cr, 0); + + or = (void *)cr + HC_LENGTH(xhci_readl(&cr->cr_capbase)); + + *hccr = cr; + *hcor = or; + + return 0; +} + +void xhci_hcd_stop(int index) +{ + int ret; + struct xhci_hccr *cr; + + ret = get_uniphier_xhci_base(index, &cr); + if (ret < 0) + return; + + uniphier_xhci_reset(cr, 1); +} |