summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/block/ahci.c18
-rw-r--r--drivers/bootcount/Makefile3
-rw-r--r--drivers/bootcount/bootcount_davinci.c4
-rw-r--r--drivers/bootcount/bootcount_env.c29
-rw-r--r--drivers/gpio/at91_gpio.c4
-rw-r--r--drivers/i2c/soft_i2c.c2
-rw-r--r--drivers/mtd/nand/atmel_nand.c8
-rw-r--r--drivers/net/at91_emac.c9
-rw-r--r--drivers/net/cpsw.c2
-rw-r--r--drivers/power/twl6030.c77
-rw-r--r--drivers/usb/gadget/g_dnl.c23
-rw-r--r--drivers/usb/gadget/regs-otg.h5
-rw-r--r--drivers/usb/gadget/s3c_udc_otg.c9
-rw-r--r--drivers/usb/host/ehci-omap.c57
-rw-r--r--drivers/video/bus_vcxk.c15
15 files changed, 193 insertions, 72 deletions
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 0daad364d7..e64df4f98d 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -379,6 +379,11 @@ static int ahci_init_one(pci_dev_t pdev)
int rc;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->dev = pdev;
@@ -503,7 +508,7 @@ static int ahci_port_start(u8 port)
mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048);
if (!mem) {
free(pp);
- printf("No mem for table!\n");
+ printf("%s: No mem for table!\n", __func__);
return -ENOMEM;
}
@@ -618,7 +623,7 @@ static int ata_scsiop_inquiry(ccb *pccb)
95 - 4,
};
u8 fis[20];
- u16 *tmpid;
+ ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS);
u8 port;
/* Clean ccb data buffer */
@@ -637,14 +642,10 @@ static int ata_scsiop_inquiry(ccb *pccb)
/* Read id from sata */
port = pccb->target;
- tmpid = malloc(ATA_ID_WORDS * 2);
- if (!tmpid)
- return -ENOMEM;
if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid,
ATA_ID_WORDS * 2, 0)) {
debug("scsi_ahci: SCSI inquiry command failure.\n");
- free(tmpid);
return -EIO;
}
@@ -889,6 +890,11 @@ int ahci_init(u32 base)
u32 linkmap;
probe_ent = malloc(sizeof(struct ahci_probe_ent));
+ if (!probe_ent) {
+ printf("%s: No memory for probe_ent\n", __func__);
+ return -ENOMEM;
+ }
+
memset(probe_ent, 0, sizeof(struct ahci_probe_ent));
probe_ent->host_flags = ATA_FLAG_SATA
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 8256ed0f46..bed6971aa5 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -6,5 +6,6 @@ obj-y += bootcount.o
obj-$(CONFIG_AT91SAM9XE) += bootcount_at91.o
obj-$(CONFIG_BLACKFIN) += bootcount_blackfin.o
obj-$(CONFIG_SOC_DA8XX) += bootcount_davinci.o
-obj-$(CONFIG_AM33XX) += bootcount_davinci.o
+obj-$(CONFIG_BOOTCOUNT_AM33XX) += bootcount_davinci.o
obj-$(CONFIG_BOOTCOUNT_RAM) += bootcount_ram.o
+obj-$(CONFIG_BOOTCOUNT_ENV) += bootcount_env.o
diff --git a/drivers/bootcount/bootcount_davinci.c b/drivers/bootcount/bootcount_davinci.c
index f0acfad805..fa87b5e7b9 100644
--- a/drivers/bootcount/bootcount_davinci.c
+++ b/drivers/bootcount/bootcount_davinci.c
@@ -2,6 +2,10 @@
* (C) Copyright 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
+ * A bootcount driver for the RTC IP block found on many TI platforms.
+ * This requires the RTC clocks, etc, to be enabled prior to use and
+ * not all boards with this IP block on it will have the RTC in use.
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
diff --git a/drivers/bootcount/bootcount_env.c b/drivers/bootcount/bootcount_env.c
new file mode 100644
index 0000000000..2d6e8db126
--- /dev/null
+++ b/drivers/bootcount/bootcount_env.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+void bootcount_store(ulong a)
+{
+ int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+
+ if (upgrade_available) {
+ setenv_ulong("bootcount", a);
+ saveenv();
+ }
+}
+
+ulong bootcount_load(void)
+{
+ int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+ ulong val = 0;
+
+ if (upgrade_available)
+ val = getenv_ulong("bootcount", 10, 0);
+
+ return val;
+}
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index af0978675e..8b766665c6 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -14,6 +14,7 @@
#include <asm/sizes.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
static struct at91_port *at91_pio_get_port(unsigned port)
{
@@ -356,9 +357,6 @@ int at91_get_pio_value(unsigned port, unsigned pin)
/* Common GPIO API */
-#define at91_gpio_to_port(gpio) (gpio / 32)
-#define at91_gpio_to_pin(gpio) (gpio % 32)
-
int gpio_request(unsigned gpio, const char *label)
{
return 0;
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 396fea89af..dfea54ae73 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -25,7 +25,7 @@
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
-#ifdef CONFIG_AT91_LEGACY
+#ifdef CONFIG_ATMEL_LEGACY
#include <asm/arch/gpio.h>
#endif
#endif
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 16b7df0f72..05ddfbb644 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -12,9 +12,8 @@
*/
#include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
#include <malloc.h>
#include <nand.h>
@@ -1154,8 +1153,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
#ifdef CONFIG_SYS_NAND_ENABLE_PIN
- at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
- !(ctrl & NAND_NCE));
+ gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
#endif
this->IO_ADDR_W = (void *) IO_ADDR_W;
}
@@ -1167,7 +1165,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
#ifdef CONFIG_SYS_NAND_READY_PIN
static int at91_nand_ready(struct mtd_info *mtd)
{
- return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
+ return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
}
#endif
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index 73612ea069..64d4c56ac5 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -10,19 +10,10 @@
#include <common.h>
#include <asm/io.h>
-#ifndef CONFIG_AT91_LEGACY
#include <asm/arch/hardware.h>
#include <asm/arch/at91_emac.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
-#else
-/* remove next 5 lines, if all RM9200 boards convert to at91 arch */
-#include <asm/arch-at91/at91rm9200.h>
-#include <asm/arch-at91/hardware.h>
-#include <asm/arch-at91/at91_emac.h>
-#include <asm/arch-at91/at91_pmc.h>
-#include <asm/arch-at91/at91_pio.h>
-#endif
#include <net.h>
#include <netdev.h>
#include <malloc.h>
diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c
index 39240d9662..50167aab63 100644
--- a/drivers/net/cpsw.c
+++ b/drivers/net/cpsw.c
@@ -914,7 +914,7 @@ static int cpsw_recv(struct eth_device *dev)
void *buffer;
int len;
- cpsw_update_link(priv);
+ cpsw_check_link(priv);
while (cpdma_process(priv, &priv->rx_chan, &buffer, &len) >= 0) {
invalidate_dcache_range((unsigned long)buffer,
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index 0858b60e06..a1c6663a2e 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -9,6 +9,26 @@
#include <twl6030.h>
+static struct twl6030_data *twl;
+
+static struct twl6030_data twl6030_info = {
+ .chip_type = chip_TWL6030,
+ .adc_rbase = GPCH0_LSB,
+ .adc_ctrl = CTRL_P2,
+ .adc_enable = CTRL_P2_SP2,
+ .vbat_mult = TWL6030_VBAT_MULT,
+ .vbat_shift = TWL6030_VBAT_SHIFT,
+};
+
+static struct twl6030_data twl6032_info = {
+ .chip_type = chip_TWL6032,
+ .adc_rbase = TWL6032_GPCH0_LSB,
+ .adc_ctrl = TWL6032_CTRL_P1,
+ .adc_enable = CTRL_P1_SP1,
+ .vbat_mult = TWL6032_VBAT_MULT,
+ .vbat_shift = TWL6032_VBAT_SHIFT,
+};
+
static int twl6030_gpadc_read_channel(u8 channel_no)
{
u8 lsb = 0;
@@ -16,12 +36,12 @@ static int twl6030_gpadc_read_channel(u8 channel_no)
int ret = 0;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- GPCH0_LSB + channel_no * 2, &lsb);
+ twl->adc_rbase + channel_no * 2, &lsb);
if (ret)
return ret;
ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
- GPCH0_MSB + channel_no * 2, &msb);
+ twl->adc_rbase + 1 + channel_no * 2, &msb);
if (ret)
return ret;
@@ -33,7 +53,8 @@ static int twl6030_gpadc_sw2_trigger(void)
u8 val;
int ret = 0;
- ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2);
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ twl->adc_ctrl, twl->adc_enable);
if (ret)
return ret;
@@ -41,7 +62,8 @@ static int twl6030_gpadc_sw2_trigger(void)
val = CTRL_P2_BUSY;
while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) {
- ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val);
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC,
+ twl->adc_ctrl, &val);
if (ret)
return ret;
udelay(1000);
@@ -102,6 +124,18 @@ int twl6030_get_battery_voltage(void)
{
int battery_volt = 0;
int ret = 0;
+ u8 vbatch;
+
+ if (twl->chip_type == chip_TWL6030) {
+ vbatch = TWL6030_GPADC_VBAT_CHNL;
+ } else {
+ ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6032_GPSELECT_ISB,
+ TWL6032_GPADC_VBAT_CHNL);
+ if (ret)
+ return ret;
+ vbatch = 0;
+ }
/* Start GPADC SW conversion */
ret = twl6030_gpadc_sw2_trigger();
@@ -111,12 +145,12 @@ int twl6030_get_battery_voltage(void)
}
/* measure Vbat voltage */
- battery_volt = twl6030_gpadc_read_channel(7);
+ battery_volt = twl6030_gpadc_read_channel(vbatch);
if (battery_volt < 0) {
printf("Failed to read battery voltage\n");
return ret;
}
- battery_volt = (battery_volt * 25 * 1000) >> (10 + 2);
+ battery_volt = (battery_volt * twl->vbat_mult) >> twl->vbat_shift;
printf("Battery Voltage: %d mV\n", battery_volt);
return battery_volt;
@@ -124,12 +158,35 @@ int twl6030_get_battery_voltage(void)
void twl6030_init_battery_charging(void)
{
- u8 stat1 = 0;
+ u8 val = 0;
int battery_volt = 0;
int ret = 0;
+ ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val);
+ if (ret) {
+ puts("twl6030_init_battery_charging(): could not determine chip!\n");
+ return;
+ }
+ if (val == 0x30) {
+ twl = &twl6030_info;
+ } else if (val == 0x32) {
+ twl = &twl6032_info;
+ } else {
+ puts("twl6030_init_battery_charging(): unsupported chip type\n");
+ return;
+ }
+
/* Enable VBAT measurement */
- twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+ if (twl->chip_type == chip_TWL6030) {
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS);
+ twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6030_GPADC_CTRL,
+ GPADC_CTRL_SCALER_DIV4);
+ } else {
+ twl6030_i2c_write_u8(TWL6030_CHIP_ADC,
+ TWL6032_GPADC_CTRL2,
+ GPADC_CTRL2_CH18_SCALER_EN);
+ }
/* Enable GPADC module */
ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS);
@@ -146,10 +203,10 @@ void twl6030_init_battery_charging(void)
printf("Main battery voltage too low!\n");
/* Check for the presence of USB charger */
- twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1);
+ twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val);
/* check for battery presence indirectly via Fuel gauge */
- if ((stat1 & VBUS_DET) && (battery_volt < 3300))
+ if ((val & VBUS_DET) && (battery_volt < 3300))
twl6030_start_usb_charging();
return;
diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index 8dc3d9f8a8..dd95afe86a 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -147,6 +147,23 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
return 0;
}
+__weak int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+ return gcnum;
+}
+
+static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
+{
+ struct usb_gadget *gadget = cdev->gadget;
+ int gcnum;
+
+ gcnum = usb_gadget_controller_number(gadget);
+ if (gcnum > 0)
+ gcnum += 0x200;
+
+ return g_dnl_get_board_bcd_device_number(gcnum);
+}
+
static int g_dnl_bind(struct usb_composite_dev *cdev)
{
struct usb_gadget *gadget = cdev->gadget;
@@ -181,11 +198,9 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
if (ret)
goto error;
- gcnum = usb_gadget_controller_number(gadget);
-
- debug("gcnum: %d\n", gcnum);
+ gcnum = g_dnl_get_bcd_device_number(cdev);
if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+ device_desc.bcdDevice = cpu_to_le16(gcnum);
else {
debug("%s: controller '%s' not recognized\n",
shortname, gadget->name);
diff --git a/drivers/usb/gadget/regs-otg.h b/drivers/usb/gadget/regs-otg.h
index 84bfcc5a01..ac5d11213d 100644
--- a/drivers/usb/gadget/regs-otg.h
+++ b/drivers/usb/gadget/regs-otg.h
@@ -226,6 +226,11 @@ struct s3c_usbotg_reg {
#define CLK_SEL_12MHZ (0x2 << 0)
#define CLK_SEL_48MHZ (0x0 << 0)
+#define EXYNOS4X12_ID_PULLUP0 (0x01 << 3)
+#define EXYNOS4X12_COMMON_ON_N0 (0x01 << 4)
+#define EXYNOS4X12_CLK_SEL_12MHZ (0x02 << 0)
+#define EXYNOS4X12_CLK_SEL_24MHZ (0x05 << 0)
+
/* Device Configuration Register DCFG */
#define DEV_SPEED_HIGH_SPEED_20 (0x0 << 0)
#define DEV_SPEED_FULL_SPEED_20 (0x1 << 0)
diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c
index 7e2020915e..ba17a04265 100644
--- a/drivers/usb/gadget/s3c_udc_otg.c
+++ b/drivers/usb/gadget/s3c_udc_otg.c
@@ -167,8 +167,13 @@ void otg_phy_init(struct s3c_udc *dev)
writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN)
&~FORCE_SUSPEND_0), &phy->phypwr);
- writel((readl(&phy->phyclk) &~(ID_PULLUP0 | COMMON_ON_N0)) |
- CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
+ if (s5p_cpu_id == 0x4412)
+ writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 |
+ EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ,
+ &phy->phyclk); /* PLL 24Mhz */
+ else
+ writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) |
+ CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */
writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST))
| PHY_SW_RST0, &phy->rstcon);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index c4ce487087..1b215c25f6 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -28,21 +28,48 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE;
static int omap_uhh_reset(void)
{
-/*
- * Soft resetting the UHH module causes instability issues on
- * all OMAPs so we just avoid it.
- *
- * See OMAP36xx Errata
- * i571: USB host EHCI may stall when entering smart-standby mode
- * i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- *
- * On OMAP4/5, soft-resetting the UHH module will put it into
- * Smart-Idle mode and lead to a deadlock.
- *
- * On OMAP3, this doesn't seem to be the case but still instabilities
- * are observed on beagle (3530 ES1.0) if soft-reset is used.
- * e.g. NFS root failures with Linux kernel.
- */
+ int timeout = 0;
+ u32 rev;
+
+ rev = readl(&uhh->rev);
+
+ /* Soft RESET */
+ writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc);
+
+ switch (rev) {
+ case OMAP_USBHS_REV1:
+ /* Wait for soft RESET to complete */
+ while (!(readl(&uhh->syss) & 0x1)) {
+ if (timeout > 100) {
+ printf("%s: RESET timeout\n", __func__);
+ return -1;
+ }
+ udelay(10);
+ timeout++;
+ }
+
+ /* Set No-Idle, No-Standby */
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+ break;
+
+ default: /* Rev. 2 onwards */
+
+ udelay(2); /* Need to wait before accessing SYSCONFIG back */
+
+ /* Wait for soft RESET to complete */
+ while ((readl(&uhh->sysc) & 0x1)) {
+ if (timeout > 100) {
+ printf("%s: RESET timeout\n", __func__);
+ return -1;
+ }
+ udelay(10);
+ timeout++;
+ }
+
+ writel(OMAP_UHH_SYSCONFIG_VAL, &uhh->sysc);
+ break;
+ }
+
return 0;
}
diff --git a/drivers/video/bus_vcxk.c b/drivers/video/bus_vcxk.c
index 0138bca05e..60a5cc5b71 100644
--- a/drivers/video/bus_vcxk.c
+++ b/drivers/video/bus_vcxk.c
@@ -20,7 +20,6 @@ vu_long *vcxk_bws_long = ((vu_long *) (CONFIG_SYS_VCXK_BASE));
#ifndef VCBITMASK
#define VCBITMASK(bitno) (0x0001 << (bitno % 16))
#endif
-#ifndef CONFIG_AT91_LEGACY
at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
#define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \
do { \
@@ -37,20 +36,6 @@ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
#define VCXK_ACKNOWLEDGE \
(!(readl(&pio->CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT.pdsr) & \
CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#else
- #define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \
- ((AT91PS_PIO) PORT)->PIO_PER = PIN; \
- ((AT91PS_PIO) PORT)->DDR = PIN; \
- ((AT91PS_PIO) PORT)->PIO_MDDR = PIN; \
- if (!I0O1) ((AT91PS_PIO) PORT)->PIO_PPUER = PIN;
-
- #define VCXK_SET_PIN(PORT, PIN) ((AT91PS_PIO) PORT)->PIO_SODR = PIN;
- #define VCXK_CLR_PIN(PORT, PIN) ((AT91PS_PIO) PORT)->PIO_CODR = PIN;
-
- #define VCXK_ACKNOWLEDGE \
- (!(((AT91PS_PIO) CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT)->\
- PIO_PDSR & CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN))
-#endif
#elif defined(CONFIG_MCF52x2)
#include <asm/m5282.h>
#ifndef VCBITMASK
generated by cgit (git 2.34.1) at 2024-12-27 08:30:32 +0000