diff options
Diffstat (limited to 'examples/standalone/test_burst_lib.S')
| -rw-r--r-- | examples/standalone/test_burst_lib.S | 154 |
1 files changed, 0 insertions, 154 deletions
diff --git a/examples/standalone/test_burst_lib.S b/examples/standalone/test_burst_lib.S deleted file mode 100644 index fd3256e88b..0000000000 --- a/examples/standalone/test_burst_lib.S +++ /dev/null @@ -1,154 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> -#include "test_burst.h" - - .text -/* - * void mmu_init(void); - * - * This function turns the MMU on - * - * Three 8 MByte regions are mapped 1:1, uncached - * - SDRAM lower 8 MByte - * - SDRAM higher 8 MByte - * - IMMR - */ - .global mmu_init -mmu_init: - tlbia /* Invalidate all TLB entries */ - li r8, 0 - mtspr MI_CTR, r8 /* Set instruction control to zero */ - lis r8, MD_RESETVAL@h - mtspr MD_CTR, r8 /* Set data TLB control */ - - /* Now map the lower 8 Meg into the TLBs. For this quick hack, - * we can load the instruction and data TLB registers with the - * same values. - */ - li r8, MI_EVALID /* Create EPN for address 0 */ - mtspr MI_EPN, r8 - mtspr MD_EPN, r8 - li r8, MI_PS8MEG /* Set 8M byte page */ - ori r8, r8, MI_SVALID /* Make it valid */ - mtspr MI_TWC, r8 - mtspr MD_TWC, r8 - li r8, MI_BOOTINIT|0x2 /* Create RPN for address 0 */ - mtspr MI_RPN, r8 /* Store TLB entry */ - mtspr MD_RPN, r8 - lis r8, MI_Kp@h /* Set the protection mode */ - mtspr MI_AP, r8 - mtspr MD_AP, r8 - - /* Now map the higher 8 Meg into the TLBs. For this quick hack, - * we can load the instruction and data TLB registers with the - * same values. - */ - lwz r9,20(r2) /* gd->ram_size */ - addis r9,r9,-0x80 - - mr r8, r9 /* Higher 8 Meg in SDRAM */ - ori r8, r8, MI_EVALID /* Mark page valid */ - mtspr MI_EPN, r8 - mtspr MD_EPN, r8 - li r8, MI_PS8MEG /* Set 8M byte page */ - ori r8, r8, MI_SVALID /* Make it valid */ - mtspr MI_TWC, r8 - mtspr MD_TWC, r8 - mr r8, r9 - ori r8, r8, MI_BOOTINIT|0x2 - mtspr MI_RPN, r8 /* Store TLB entry */ - mtspr MD_RPN, r8 - lis r8, MI_Kp@h /* Set the protection mode */ - mtspr MI_AP, r8 - mtspr MD_AP, r8 - - /* Map another 8 MByte at the IMMR to get the processor - * internal registers (among other things). - */ - mfspr r9, 638 /* Get current IMMR */ - andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */ - - mr r8, r9 /* Create vaddr for TLB */ - ori r8, r8, MD_EVALID /* Mark it valid */ - mtspr MD_EPN, r8 - li r8, MD_PS8MEG /* Set 8M byte page */ - ori r8, r8, MD_SVALID /* Make it valid */ - mtspr MD_TWC, r8 - mr r8, r9 /* Create paddr for TLB */ - ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */ - mtspr MD_RPN, r8 - - /* We now have the lower and higher 8 Meg mapped into TLB entries, - * and the caches ready to work. - */ - mfmsr r0 - ori r0,r0,MSR_DR|MSR_IR - mtspr SRR1,r0 - mflr r0 - mtspr SRR0,r0 - SYNC - rfi /* enables MMU */ - -/* - * void caches_init(void); - */ - .globl caches_init -caches_init: - sync - - mfspr r3, IC_CST /* Clear error bits */ - mfspr r3, DC_CST - - lis r3, IDC_UNALL@h /* Unlock all */ - mtspr IC_CST, r3 - mtspr DC_CST, r3 - - lis r3, IDC_INVALL@h /* Invalidate all */ - mtspr IC_CST, r3 - mtspr DC_CST, r3 - - lis r3, IDC_ENABLE@h /* Enable all */ - mtspr IC_CST, r3 - mtspr DC_CST, r3 - - blr - -/* - * void flush_dcache_range(unsigned long start, unsigned long stop); - */ - .global flush_dcache_range -flush_dcache_range: - li r5,CACHE_LINE_SIZE-1 - andc r3,r3,r5 - subf r4,r3,r4 - add r4,r4,r5 - srwi. r4,r4,LG_CACHE_LINE_SIZE - beqlr - mtctr r4 - -1: dcbf 0,r3 - addi r3,r3,CACHE_LINE_SIZE - bdnz 1b - sync /* wait for dcbf's to get to ram */ - blr - -/* - * void disable_interrupts(void); - */ - .global disable_interrupts -disable_interrupts: - mfmsr r0 - rlwinm r0,r0,0,17,15 - mtmsr r0 - blr |