diff options
Diffstat (limited to 'include/asm-arm/arch-arm1136/omap2420.h')
| -rw-r--r-- | include/asm-arm/arch-arm1136/omap2420.h | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h new file mode 100644 index 0000000000..0c11beccf6 --- /dev/null +++ b/include/asm-arm/arch-arm1136/omap2420.h @@ -0,0 +1,246 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2420_SYS_H_ +#define _OMAP2420_SYS_H_ + +#include <asm/arch/sizes.h> + +/* + * 2420 specific Section + */ + +/* L3 Firewall */ +#define A_REQINFOPERM0 0x68005048 +#define A_READPERM0 0x68005050 +#define A_WRITEPERM0 0x68005058 +/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ + +/* L3 Firewall */ +#define A_REQINFOPERM0 0x68005048 +#define A_READPERM0 0x68005050 +#define A_WRITEPERM0 0x68005058 + +/* CONTROL */ +#define OMAP2420_CTRL_BASE (0x48000000) +#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) + +/* device type */ +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* TAP information */ +#define OMAP2420_TAP_BASE (0x48014000) +#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) +#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) + +/* GPMC */ +#define OMAP2420_GPMC_BASE (0x6800A000) +#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) +#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) +#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) +#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) +#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) +#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) +#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) +#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) +#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) +#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) +#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) +#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) +#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) +#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) +#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) +#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) +#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0) +#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4) +#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8) +#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC) +#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0) +#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4) +#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8) +#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0) +#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4) +#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8) +#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC) +#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100) +#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104) +#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108) + +/* SMS */ +#define OMAP2420_SMS_BASE 0x68008000 +#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) +#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) +# define BURSTCOMPLETE_GROUP7 BIT31 + +/* SDRC */ +#define OMAP2420_SDRC_BASE 0x68009000 +#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) +#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) +#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) +#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) +#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) +#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) +#define OMAP2420_SDRC_CS0 0x80000000 +#define OMAP2420_SDRC_CS1 0xA0000000 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + + +/* UART */ +#define OMAP2420_UART1 0x4806A000 +#define OMAP2420_UART2 0x4806C000 +#define OMAP2420_UART3 0x4806E000 + +/* General Purpose Timers */ +#define OMAP2420_GPT1 0x48028000 +#define OMAP2420_GPT2 0x4802A000 +#define OMAP2420_GPT3 0x48078000 +#define OMAP2420_GPT4 0x4807A000 +#define OMAP2420_GPT5 0x4807C000 +#define OMAP2420_GPT6 0x4807E000 +#define OMAP2420_GPT7 0x48080000 +#define OMAP2420_GPT8 0x48082000 +#define OMAP2420_GPT9 0x48084000 +#define OMAP2420_GPT10 0x48086000 +#define OMAP2420_GPT11 0x48088000 +#define OMAP2420_GPT12 0x4808A000 + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE 0x48020000 +#define WD2_BASE 0x48022000 +#define WD3_BASE 0x48024000 +#define WD4_BASE 0x48026000 +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define OMAP2420_CM_BASE 0x48008000 +#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) +#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) +#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) +#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) +#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) + +/* + * H4 specific Section + */ + +/* + * The 2420's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + */ +#if defined(CONFIG_OMAP2420H4) +/* GPMC */ +#ifdef CONFIG_VIRTIO_A /* Pre version B */ +# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x04000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#else +# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x08000000 /* debug board */ +# define H4_CS2_BASE 0x0A000000 /* wifi board */ +#endif + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +/* FPGA on Debug board.*/ +#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) +#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) +#endif /* endif CONFIG_2420H4 */ + +#if defined(CONFIG_APOLLON) +#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */ +#define APOLLON_CS1_BASE 0x08000000 /* ethernet */ +#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */ +#define APOLLON_CS3_BASE 0x18000000 /* NOR */ + +#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b) +#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c) +#endif /* endif CONFIG_APOLLON */ + +/* Common */ +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +#endif |