diff options
Diffstat (limited to 'include/asm-arm/arch-xscale/pxa-regs.h')
| -rw-r--r-- | include/asm-arm/arch-xscale/pxa-regs.h | 359 |
1 files changed, 300 insertions, 59 deletions
diff --git a/include/asm-arm/arch-xscale/pxa-regs.h b/include/asm-arm/arch-xscale/pxa-regs.h index 2975fa395f..449ec9fd95 100644 --- a/include/asm-arm/arch-xscale/pxa-regs.h +++ b/include/asm-arm/arch-xscale/pxa-regs.h @@ -1,15 +1,23 @@ /* * linux/include/asm-arm/arch-pxa/pxa-regs.h - * + * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de + * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. + * Added include for hardware.h (for __REG definition) */ +#ifndef _PXA_REGS_H_ +#define _PXA_REGS_H_ +#include "bitfield.h" +#include "hardware.h" /* FIXME hack so that SA-1111.h will work [cb] */ @@ -22,13 +30,6 @@ typedef void *Address ; typedef void (*ExcpHndlr) (void) ; #endif -#ifndef __ASSEMBLY__ -#define io_p2v(PhAdd) (PhAdd) -#define __REG(x) (*((volatile u32 *)io_p2v(x))) -#else -#define __REG(x) (x) -#endif - /* * PXA Chip selects */ @@ -369,7 +370,7 @@ typedef void (*ExcpHndlr) (void) ; #define LSR_OE (1 << 1) /* Overrun Error */ #define LSR_DR (1 << 0) /* Data Ready */ -#define MCR_LOOP (1 << 4) */ +#define MCR_LOOP (1 << 4) */ #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ #define MCR_RTS (1 << 1) /* Request to Send */ @@ -414,7 +415,6 @@ typedef void (*ExcpHndlr) (void) ; IrSR_RCVEIR_UART_MODE | \ IrSR_XMITIR_IR_MODE) - /* * I2C registers */ @@ -425,6 +425,38 @@ typedef void (*ExcpHndlr) (void) ; #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ +/* ----- Control register bits ---------------------------------------- */ + +#define ICR_START 0x1 /* start bit */ +#define ICR_STOP 0x2 /* stop bit */ +#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ +#define ICR_TB 0x8 /* transfer byte bit */ +#define ICR_MA 0x10 /* master abort */ +#define ICR_SCLE 0x20 /* master clock enable */ +#define ICR_IUE 0x40 /* unit enable */ +#define ICR_GCD 0x80 /* general call disable */ +#define ICR_ITEIE 0x100 /* enable tx interrupts */ +#define ICR_IRFIE 0x200 /* enable rx interrupts */ +#define ICR_BEIE 0x400 /* enable bus error ints */ +#define ICR_SSDIE 0x800 /* slave STOP detected int enable */ +#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ +#define ICR_SADIE 0x2000 /* slave address detected int enable */ +#define ICR_UR 0x4000 /* unit reset */ +#define ICR_FM 0x8000 /* Fast Mode */ + +/* ----- Status register bits ----------------------------------------- */ + +#define ISR_RWM 0x1 /* read/write mode */ +#define ISR_ACKNAK 0x2 /* ack/nak status */ +#define ISR_UB 0x4 /* unit busy */ +#define ISR_IBB 0x8 /* bus busy */ +#define ISR_SSD 0x10 /* slave stop detected */ +#define ISR_ALD 0x20 /* arbitration loss detected */ +#define ISR_ITE 0x40 /* tx buffer empty */ +#define ISR_IRF 0x80 /* rx buffer full */ +#define ISR_GCAD 0x100 /* general call address detected */ +#define ISR_SAD 0x200 /* slave address detected */ +#define ISR_BED 0x400 /* bus error no ACK/NAK */ /* * Serial Audio Controller @@ -524,24 +556,92 @@ typedef void (*ExcpHndlr) (void) ; /* * USB Device Controller */ +#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ +#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ +#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ #define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + #define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +/* Bulk IN - Endpoint 1,6,11 */ #define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ #define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ #define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +/* Bulk OUT - Endpoint 2,7,12 */ +#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ #define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +/* Isochronous IN - Endpoint 3,8,13 */ +#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ #define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +/* Isochronous OUT - Endpoint 4,9,14 */ +#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ #define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +/* Interrupt IN - Endpoint 5,10,15 */ +#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ #define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + #define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ #define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ #define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ @@ -566,11 +666,51 @@ typedef void (*ExcpHndlr) (void) ; #define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ #define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ #define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ + #define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + #define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + #define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ + +#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrup request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrup request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */ + #define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ +#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ + /* * Fast Infrared Communication Port @@ -917,6 +1057,22 @@ typedef void (*ExcpHndlr) (void) ; #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ +#define PSSR_RDH (1 << 5) /* Read Disable Hold */ +#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ +#define PSSR_VFS (1 << 2) /* VDD Fault Status */ +#define PSSR_BFS (1 << 1) /* Battery Fault Status */ +#define PSSR_SSS (1 << 0) /* Software Sleep Status */ + +#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ +#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ +#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ +#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ + +#define RCSR_GPR (1 << 3) /* GPIO Reset */ +#define RCSR_SMR (1 << 2) /* Sleep Mode */ +#define RCSR_WDR (1 << 1) /* Watchdog Reset */ +#define RCSR_HWR (1 << 0) /* Hardware Reset */ + /* * SSP Serial Port Registers @@ -1040,19 +1196,105 @@ typedef void (*ExcpHndlr) (void) ; #define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ + (((Pixel) - 1) << FShft (LCCR1_PPL)) + +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ + /* pulse Width [1..64 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_HSW)) + +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ + /* count - 1 [Tpix] */ +#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ + /* [1..256 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_ELW)) + +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ + /* Wait count - 1 [Tpix] */ +#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ + /* [1..256 Tpix] */ \ + (((Tpix) - 1) << FShft (LCCR1_BLW)) + + +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ + (((Line) - 1) << FShft (LCCR2_LPP)) + +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ + /* Width - 1 [Tln] (L_FCLK) */ +#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ + /* Width [1..64 Tln] */ \ + (((Tln) - 1) << FShft (LCCR2_VSW)) + +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ + /* count [Tln] */ +#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ + /* [0..255 Tln] */ \ + ((Tln) << FShft (LCCR2_EFW)) + +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ + /* Wait count [Tln] */ +#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ + /* [0..255 Tln] */ \ + ((Tln) << FShft (LCCR2_BFW)) + +#if 0 #define LCCR3_PCD (0xff) /* Pixel clock divisor */ #define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ #define LCCR3_ACB_S 8 +#endif + #define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ #define LCCR3_API_S 16 #define LCCR3_VSP (1 << 20) /* vertical sync polarity */ #define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ #define LCCR3_PCP (1 << 22) /* pixel clock polarity */ #define LCCR3_OEP (1 << 23) /* output enable polarity */ +#if 0 #define LCCR3_BPP (7 << 24) /* bits per pixel */ #define LCCR3_BPP_S 24 +#endif #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ + +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ + (((Div) << FShft (LCCR3_PCD))) + + +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ + (((Bpp) << FShft (LCCR3_BPP))) + +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) /* BAC Bias */ \ + (((Acb) << FShft (LCCR3_ACB))) + +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ + /* pulse active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ + +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ + /* active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ + /* active Low */ + +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ + +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ + #define LCSR_LDD (1 << 0) /* LCD Disable Done */ #define LCSR_SOF (1 << 1) /* Start of frame */ #define LCSR_BER (1 << 2) /* Bus error */ @@ -1071,45 +1313,7 @@ typedef void (*ExcpHndlr) (void) ; * Memory controller */ -#define MEMC_BASE __REG(0x48000000) /* Base of Memoriy Controller */ -#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ -#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ -#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ -#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ -#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ -#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ -#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ -#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ - -#define MDCNFG_DE0 0x00000001 -#define MDCNFG_DE1 0x00000002 -#define MDCNFG_DE2 0x00010000 -#define MDCNFG_DE3 0x00020000 -#define MDCNFG_DWID0 0x00000004 - -#define MDREFR_E0PIN 0x00001000 -#define MDREFR_K0RUN 0x00002000 -#define MDREFR_K0DB2 0x00004000 -#define MDREFR_E1PIN 0x00008000 -#define MDREFR_K1RUN 0x00010000 -#define MDREFR_K1DB2 0x00020000 -#define MDREFR_K2RUN 0x00040000 -#define MDREFR_K2DB2 0x00080000 -#define MDREFR_APD 0x00100000 -#define MDREFR_SLFRSH 0x00400000 -#define MDREFR_K0FREE 0x00800000 -#define MDREFR_K1FREE 0x01000000 -#define MDREFR_K2FREE 0x02000000 - +#define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ #define MDCNFG_OFFSET 0x0 #define MDREFR_OFFSET 0x4 #define MSC0_OFFSET 0x8 @@ -1127,7 +1331,44 @@ typedef void (*ExcpHndlr) (void) ; #define MCIO0_OFFSET 0x38 #define MCIO1_OFFSET 0x3C #define MDMRS_OFFSET 0x40 + +#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ +#define MDCNFG_DE0 0x00000001 +#define MDCNFG_DE1 0x00000002 +#define MDCNFG_DE2 0x00010000 +#define MDCNFG_DE3 0x00020000 +#define MDCNFG_DWID0 0x00000004 + +#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ +#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ +#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ +#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ +#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ +#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ +#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ +#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ +#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ +#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ +#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ +#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ +#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ +#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ +#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ +#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ +#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ +#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ +#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ +#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ +#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ +#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ +#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ +#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - +#endif |