diff options
Diffstat (limited to 'include/configs/DK1S10.h')
| -rw-r--r-- | include/configs/DK1S10.h | 314 |
1 files changed, 157 insertions, 157 deletions
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h index 12d4e6b427..1d031f1cde 100644 --- a/include/configs/DK1S10.h +++ b/include/configs/DK1S10.h @@ -38,7 +38,7 @@ #elif defined(CONFIG_NIOS_MTX_LDK_20) #include <configs/DK1S10_mtx_ldk_20.h> #else -#error *** CFG_ERROR: you have to setup right NIOS CPU configuration +#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration #endif /*------------------------------------------------------------------------ @@ -46,36 +46,36 @@ *----------------------------------------------------------------------*/ #define CONFIG_NIOS 1 /* NIOS-32 core */ #define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/ -#define CONFIG_SYS_CLK_FREQ CFG_NIOS_CPU_CLK/* 50 MHz core clock */ -#define CFG_HZ 1000 /* 1 msec time tick */ -#undef CFG_CLKS_IN_HZ +#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */ +#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */ +#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ /*------------------------------------------------------------------------ * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM) *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_SDRAM_SIZE != 0) +#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0) -#define CFG_SDRAM_BASE CFG_NIOS_CPU_SDRAM_BASE -#define CFG_SDRAM_SIZE CFG_NIOS_CPU_SDRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE #else -#error *** CFG_ERROR: you have to setup any SDRAM in NIOS CPU config +#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config #endif -#if defined(CFG_NIOS_CPU_SRAM_BASE) && defined(CFG_NIOS_CPU_SRAM_SIZE) +#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE) -#define CFG_SRAM_BASE CFG_NIOS_CPU_SRAM_BASE -#define CFG_SRAM_SIZE CFG_NIOS_CPU_SRAM_SIZE +#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE +#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE #else -#undef CFG_SRAM_BASE -#undef CFG_SRAM_SIZE +#undef CONFIG_SYS_SRAM_BASE +#undef CONFIG_SYS_SRAM_SIZE #endif -#define CFG_VECT_BASE CFG_NIOS_CPU_VEC_BASE +#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE /*------------------------------------------------------------------------ * MEMORY ORGANIZATION - For the most part, you can put things pretty @@ -88,45 +88,45 @@ * -Global data is placed below the heap. * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ -#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ -#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET /*------------------------------------------------------------------------ * FLASH (AM29LV065D) *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_FLASH_SIZE != 0) +#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) -#define CFG_FLASH_BASE CFG_NIOS_CPU_FLASH_BASE -#define CFG_FLASH_SIZE CFG_NIOS_CPU_FLASH_SIZE -#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ -#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ -#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ -#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ -#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE +#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */ #else -#error *** CFG_ERROR: you have to setup any Flash memory in NIOS CPU config +#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config #endif /*------------------------------------------------------------------------ * ENVIRONMENT *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_FLASH_SIZE != 0) +#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0) #define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */ #if defined(CONFIG_NIOS_STANDARD_32) -#define CONFIG_ENV_ADDR CFG_FLASH_BASE /* Mem addr of env */ +#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */ #elif defined(CONFIG_NIOS_MTX_LDK_20) -#define CONFIG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) #else -#error *** CFG_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR +#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR #endif #define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ @@ -139,121 +139,121 @@ /*------------------------------------------------------------------------ * CONSOLE *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_UART_NUMS != 0) +#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0) -#define CFG_NIOS_CONSOLE CFG_NIOS_CPU_UART0 /* 1st UART is Cons. */ +#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#if (CFG_NIOS_CPU_UART0_BR != 0) -#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ -#define CONFIG_BAUDRATE CFG_NIOS_CPU_UART0_BR +#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0) +#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR #else -#undef CFG_NIOS_FIXEDBAUD +#undef CONFIG_SYS_NIOS_FIXEDBAUD #define CONFIG_BAUDRATE 115200 #endif -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #else -#error *** CFG_ERROR: you have to setup at least one UART in NIOS CPU config +#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config #endif /*------------------------------------------------------------------------ * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT, * so an avalon bus timer is required. *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_TIMER_NUMS != 0) && defined(CFG_NIOS_CPU_TICK_TIMER) +#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER) -#if (CFG_NIOS_CPU_TICK_TIMER == 0) +#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0) -#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER0 /* TIMER0 as tick */ -#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER0_IRQ +#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */ +#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ -#if (CFG_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ +#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */ -#if (CFG_NIOS_CPU_TIMER0_PER >= CFG_HZ) -#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER0_PER / CFG_HZ) +#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ) +#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ) #else -#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ #endif -#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ +#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ -#elif (CFG_NIOS_CPU_TIMER0_FP == 0) /* variable period */ +#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */ -#if (CFG_HZ <= 1000) -#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#if (CONFIG_SYS_HZ <= 1000) +#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) #else -#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 #endif -#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) +#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) #else -#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER0_FP correct +#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct #endif -#elif (CFG_NIOS_CPU_TICK_TIMER == 1) +#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1) -#define CFG_NIOS_TMRBASE CFG_NIOS_CPU_TIMER1 /* TIMER1 as tick */ -#define CFG_NIOS_TMRIRQ CFG_NIOS_CPU_TIMER1_IRQ +#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */ +#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ -#if (CFG_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ +#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */ -#if (CFG_NIOS_CPU_TIMER1_PER >= CFG_HZ) -#define CFG_NIOS_TMRMS (CFG_NIOS_CPU_TIMER1_PER / CFG_HZ) +#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ) +#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ) #else -#error *** CFG_ERROR: you have to use a timer periode greater than CFG_HZ +#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ #endif -#undef CFG_NIOS_TMRCNT /* no preloadable counter value */ +#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */ -#elif (CFG_NIOS_CPU_TIMER1_FP == 0) /* variable period */ +#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */ -#if (CFG_HZ <= 1000) -#define CFG_NIOS_TMRMS (1000 / CFG_HZ) +#if (CONFIG_SYS_HZ <= 1000) +#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ) #else -#error *** CFG_ERROR: sorry, CFG_HZ have to be less than 1000 +#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000 #endif -#define CFG_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CFG_HZ) +#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ) #else -#error *** CFG_ERROR: you have to define CFG_NIOS_CPU_TIMER1_FP correct +#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct #endif -#endif /* CFG_NIOS_CPU_TICK_TIMER */ +#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */ #else -#error *** CFG_ERROR: you have to setup at least one TIMER in NIOS CPU config +#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config #endif /*------------------------------------------------------------------------ * Ethernet -- needs work! *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_LAN_NUMS == 1) +#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1) -#if (CFG_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ +#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */ #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ -#define CONFIG_SMC91111_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS) +#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) -#if (CFG_NIOS_CPU_LAN0_BUSW == 32) +#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) #define CONFIG_SMC_USE_32_BIT 1 #else /* no */ #undef CONFIG_SMC_USE_32_BIT #endif -#elif (CFG_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ +#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */ /********************************************/ /* !!! CS8900 is __not__ tested on NIOS !!! */ /********************************************/ #define CONFIG_DRIVER_CS8900 /* Using CS8900 */ -#define CS8900_BASE (CFG_NIOS_CPU_LAN0_BASE + CFG_NIOS_CPU_LAN0_OFFS) +#define CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS) -#if (CFG_NIOS_CPU_LAN0_BUSW == 32) +#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32) #undef CS8900_BUS16 #define CS8900_BUS32 1 #else /* no */ @@ -262,7 +262,7 @@ #endif #else -#error *** CFG_ERROR: invalid LAN0 chip type, check your NIOS CPU config +#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config #endif #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -271,64 +271,64 @@ #define CONFIG_SERVERIP 192.168.2.16 #else -#error *** CFG_ERROR: you have to setup just one LAN only or expand your config.h +#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h #endif /*------------------------------------------------------------------------ * STATUS LEDs *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_LED_PIO) +#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO) -#if (CFG_NIOS_CPU_LED_PIO == 0) +#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0) -#error *** CFG_ERROR: status LEDs at PIO0 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 1) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1) -#error *** CFG_ERROR: status LEDs at PIO1 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 2) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2) -#define STATUS_LED_BASE CFG_NIOS_CPU_PIO2 -#define STATUS_LED_BITS CFG_NIOS_CPU_PIO2_BITS +#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2 +#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS #define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */ -#if (CFG_NIOS_CPU_PIO2_TYPE == 1) +#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1) #define STATUS_LED_WRONLY 1 #else #undef STATUS_LED_WRONLY #endif -#elif (CFG_NIOS_CPU_LED_PIO == 3) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3) -#error *** CFG_ERROR: status LEDs at PIO3 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 4) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4) -#error *** CFG_ERROR: status LEDs at PIO4 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 5) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5) -#error *** CFG_ERROR: status LEDs at PIO5 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 6) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6) -#error *** CFG_ERROR: status LEDs at PIO6 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 7) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7) -#error *** CFG_ERROR: status LEDs at PIO7 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 8) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8) -#error *** CFG_ERROR: status LEDs at PIO8 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h -#elif (CFG_NIOS_CPU_LED_PIO == 9) +#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9) -#error *** CFG_ERROR: status LEDs at PIO9 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h #else -#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_LED_PIO in right case +#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case #endif #define CONFIG_STATUS_LED 1 /* enable status led driver */ @@ -336,89 +336,89 @@ #define STATUS_LED_BIT (1 << 0) /* LED[0] */ #define STATUS_LED_STATE STATUS_LED_BLINKING #define STATUS_LED_BOOT_STATE STATUS_LED_OFF -#define STATUS_LED_PERIOD (CFG_HZ / 10) /* ca. 1 Hz */ +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ #define STATUS_LED_BOOT 0 /* boot LED */ #if (STATUS_LED_BITS > 1) #define STATUS_LED_BIT1 (1 << 1) /* LED[1] */ #define STATUS_LED_STATE1 STATUS_LED_OFF -#define STATUS_LED_PERIOD1 (CFG_HZ / 50) /* ca. 5 Hz */ +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */ #define STATUS_LED_RED 1 /* fail LED */ #endif #if (STATUS_LED_BITS > 2) #define STATUS_LED_BIT2 (1 << 2) /* LED[2] */ #define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_PERIOD2 (CFG_HZ / 10) /* ca. 1 Hz */ +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ #define STATUS_LED_YELLOW 2 /* info LED */ #endif #if (STATUS_LED_BITS > 3) #define STATUS_LED_BIT3 (1 << 3) /* LED[3] */ #define STATUS_LED_STATE3 STATUS_LED_OFF -#define STATUS_LED_PERIOD3 (CFG_HZ / 10) /* ca. 1 Hz */ +#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */ #define STATUS_LED_GREEN 3 /* info LED */ #endif #define STATUS_LED_PAR 1 /* makes status_led.h happy */ -#endif /* CFG_NIOS_CPU_PIO_NUMS */ +#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ /*------------------------------------------------------------------------ * SEVEN SEGMENT LED DISPLAY *----------------------------------------------------------------------*/ -#if (CFG_NIOS_CPU_PIO_NUMS != 0) && defined(CFG_NIOS_CPU_SEVENSEG_PIO) +#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO) -#if (CFG_NIOS_CPU_SEVENSEG_PIO == 0) +#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0) -#error *** CFG_ERROR: seven segment display at PIO0 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 1) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1) -#error *** CFG_ERROR: seven segment display at PIO1 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 2) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2) -#error *** CFG_ERROR: seven segment display at PIO2 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 3) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3) -#define SEVENSEG_BASE CFG_NIOS_CPU_PIO3 -#define SEVENSEG_BITS CFG_NIOS_CPU_PIO3_BITS +#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3 +#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS #define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */ -#if (CFG_NIOS_CPU_PIO3_TYPE == 1) +#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1) #define SEVENSEG_WRONLY 1 #else #undef SEVENSEG_WRONLY #endif -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 4) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4) -#error *** CFG_ERROR: seven segment display at PIO4 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 5) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5) -#error *** CFG_ERROR: seven segment display at PIO5 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 6) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6) -#error *** CFG_ERROR: seven segment display at PIO6 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 7) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7) -#error *** CFG_ERROR: seven segment display at PIO7 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 8) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8) -#error *** CFG_ERROR: seven segment display at PIO8 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h -#elif (CFG_NIOS_CPU_SEVENSEG_PIO == 9) +#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9) -#error *** CFG_ERROR: seven segment display at PIO9 not supported, expand your config.h +#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h #else -#error *** CFG_ERROR: you have to set CFG_NIOS_CPU_SEVENSEG_PIO in right case +#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case #endif #define CONFIG_SEVENSEG 1 /* enable seven segment led driver */ @@ -452,7 +452,7 @@ #define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */ #define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */ -#endif /* CFG_NIOS_CPU_PIO_NUMS */ +#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */ /* * BOOTP options @@ -496,48 +496,48 @@ /*------------------------------------------------------------------------ * MISC *----------------------------------------------------------------------*/ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "DK1S10 > " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args*/ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "DK1S10 > " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ /* Default load address */ -#if (CFG_SRAM_SIZE != 0) +#if (CONFIG_SYS_SRAM_SIZE != 0) /* default in SRAM */ -#define CFG_LOAD_ADDR CFG_SRAM_BASE +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE -#elif (CFG_SDRAM_SIZE != 0) +#elif (CONFIG_SYS_SDRAM_SIZE != 0) /* default in SDRAM */ -#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE) -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE) +#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) #else -#define CFG_LOAD_ADDR CFG_SDRAM_BASE +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE #endif #else -#undef CFG_LOAD_ADDR /* force error break */ +#undef CONFIG_SYS_LOAD_ADDR /* force error break */ #endif /* MEM test area */ -#if (CFG_SDRAM_SIZE != 0) +#if (CONFIG_SYS_SDRAM_SIZE != 0) /* SDRAM begin to stack area (1MB stack) */ -#if (CFG_SDRAM_BASE == CFG_NIOS_CPU_VEC_BASE) -#define CFG_MEMTEST_START (CFG_SDRAM_BASE + CFG_NIOS_CPU_VEC_SIZE) -#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) +#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE) +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) #else -#define CFG_MEMTEST_START CFG_SDRAM_BASE -#define CFG_MEMTEST_END (CFG_INIT_SP - (1024 * 1024)) +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) #endif #else -#undef CFG_MEMTEST_START /* force error break */ -#undef CFG_MEMTEST_END +#undef CONFIG_SYS_MEMTEST_START /* force error break */ +#undef CONFIG_SYS_MEMTEST_END #endif /* |