diff options
Diffstat (limited to 'include/configs/MPC8266ADS.h')
| -rw-r--r-- | include/configs/MPC8266ADS.h | 63 |
1 files changed, 32 insertions, 31 deletions
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 0a4b04df4b..4953b7053b 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -31,13 +31,13 @@ */ /* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - !! !! + !! !! !! This configuration requires JP3 to be in position 1-2 to work !! - !! To make it work for the default, the TEXT_BASE define in !! + !! To make it work for the default, the TEXT_BASE define in !! !! board/mpc8266ads/config.mk must be changed from 0xfe000000 to !! !! 0xfff00000 !! !! The CFG_HRCW_MASTER define below must also be changed to match !! - !! !! + !! !! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */ @@ -139,23 +139,24 @@ * Definitions for Serial Presence Detect EEPROM address * (to get SDRAM settings) */ -#define SPD_EEPROM_ADDRESS 0x50 +#define SPD_EEPROM_ADDRESS 0x50 #define CONFIG_8260_CLKIN 66000000 /* in Hz */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS ( CFG_CMD_ALL & ~( \ - CFG_CMD_BEDBUG | \ +#define CONFIG_COMMANDS ( CFG_CMD_ALL & ~( \ + CFG_CMD_BEDBUG | \ CFG_CMD_BMP | \ CFG_CMD_BSP | \ CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ + CFG_CMD_DHCP | \ + CFG_CMD_DISPLAY | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ CFG_CMD_EXT2 | \ CFG_CMD_FDC | \ CFG_CMD_FDOS | \ @@ -165,7 +166,7 @@ CFG_CMD_KGDB | \ CFG_CMD_MMC | \ CFG_CMD_NAND | \ - CFG_CMD_PCMCIA | \ + CFG_CMD_PCMCIA | \ CFG_CMD_REISER | \ CFG_CMD_SCSI | \ CFG_CMD_SPI | \ @@ -178,8 +179,8 @@ /* Define a command string that is automatically executed when no character * is read on the console interface withing "Boot Delay" after reset. */ -#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */ -#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */ +#undef CONFIG_BOOT_ROOT_INITRD /* Use ram disk for the root file system */ +#define CONFIG_BOOT_ROOT_NFS /* Use a NFS mounted root file system */ #ifdef CONFIG_BOOT_ROOT_INITRD #define CONFIG_BOOTCOMMAND \ @@ -187,7 +188,7 @@ "echo;" \ "bootp;" \ "setenv bootargs root=/dev/ram0 rw " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" #endif /* CONFIG_BOOT_ROOT_INITRD */ @@ -196,8 +197,8 @@ "version;" \ "echo;" \ "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" #endif /* CONFIG_BOOT_ROOT_NFS */ @@ -457,7 +458,7 @@ /*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 + * HIDx - Hardware Implementation-dependent Registers 2-11 *----------------------------------------------------------------------- * HID0 also contains cache control - initially enable both caches and * invalidate contents, then the final state leaves only the instruction @@ -489,7 +490,7 @@ * 0x80000000-0x9FFFFFFF 512MB outbound prefetchable PCI memory window * 0xA0000000-0xBFFFFFFF 512MB outbound non-prefetchable PCI memory window * 0xF0000000-0xF001FFFF 128KB MPC8266 internal memory - * 0xF4000000-0xF7FFFFFF 64MB outbound PCI I/O window + * 0xF4000000-0xF7FFFFFF 64MB outbound PCI I/O window * 0xF8000000-0xF8007FFF 32KB BCSR * 0xF8100000-0xF8107FFF 32KB ATM UNI * 0xF8200000-0xF8207FFF 32KB PCI interrupt controller @@ -543,10 +544,10 @@ * in the bridge. */ -#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ -#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ -#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL -#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ +#define CFG_PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */ +#define CFG_PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */ +#define CFG_CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL +#define CFG_PCI_MSTR_MEM_SIZE 0x20000000 /* 512MB */ #define CFG_POCMR0_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN) /* @@ -555,11 +556,11 @@ * in the bridge. */ -#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ -#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ -#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL -#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ -#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) +#define CFG_PCI_MSTR_MEMIO_LOCAL 0xA0000000 /* Local base */ +#define CFG_PCI_MSTR_MEMIO_BUS 0xA0000000 /* PCI base */ +#define CFG_CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL +#define CFG_PCI_MSTR_MEMIO_SIZE 0x20000000 /* 512MB */ +#define CFG_POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE) /* * Master window that allows the CPU to access PCI IO space. @@ -567,11 +568,11 @@ * in the bridge. */ -#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ -#define CFG_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */ -#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL -#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ -#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO) +#define CFG_PCI_MSTR_IO_LOCAL 0xF4000000 /* Local base */ +#define CFG_PCI_MSTR_IO_BUS 0xF4000000 /* PCI base */ +#define CFG_CPU_PCI_IO_START PCI_MSTR_IO_LOCAL +#define CFG_PCI_MSTR_IO_SIZE 0x04000000 /* 64MB */ +#define CFG_POCMR2_MASK_ATTRIB (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO) /* * JFFS2 partitions |