diff options
Diffstat (limited to 'include/configs/MPC8540EVAL.h')
| -rw-r--r-- | include/configs/MPC8540EVAL.h | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h new file mode 100644 index 0000000000..1af923103f --- /dev/null +++ b/include/configs/MPC8540EVAL.h @@ -0,0 +1,347 @@ +/* + * (C) Copyright 2002,2003 Motorola,Inc. + * Modified by Lunsheng Wang, lunsheng@sohu.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* mpc8540eval board configuration file */ +/* please refer to doc/README.mpc85xxads for more info */ +/* make sure you change the MAC address and other network params first, + * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H +/* High Level Configuration Options */ +#define CONFIG_BOOKE 1 /* BOOKE */ +#define CONFIG_E500 1 /* BOOKE e500 family */ +#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ +#define CONFIG_MPC8540 1 /* MPC8540 specific */ +#define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */ + +#undef CONFIG_PCI /* pci ethernet support */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_DLL /* possible DLL fix needed */ + +/* Using Localbus SDRAM to emulate flash before we can program the flash, + * normally you only need a flash-boot image(u-boot.bin),if unsure undef this. + * Not availabe for EVAL board + */ +#undef CONFIG_RAM_AS_FLASH + +/* sysclk for MPC8540EVAL */ +#if defined(CONFIG_SYSCLK_66M) + /* + * the oscillator on board is 66Mhz + * can also get 66M clock from external PCI + */ + #define CONFIG_SYS_CLK_FREQ 66000000 +#else + #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ +#endif + +/* below can be toggled for performance analysis. otherwise use default */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#undef CONFIG_BTB /* toggle branch predition */ +#undef CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ + +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00200000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00400000 + +#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) +#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both." +#endif + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ +#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ + +#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE +#define CFG_SDRAM_SIZE 256 /* DDR is now 256MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ +#else +#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#endif +#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 0MB */ + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_FLASH_BASE 0xf8000000 /* start of FLASH 16M */ +#define CFG_BR0_PRELIM 0xf8001801 /* port size 32bit */ +#else /* Boot from real Flash */ +#define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ +#define CFG_BR0_PRELIM 0xff801001 /* port size 16bit */ +#endif + +#define CFG_OR0_PRELIM 0xff806f67 /* 8MB Flash */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 64 /* sectors per device */ +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/ +#define CFG_FLASH_CFI 1 + +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT +#else +#undef CFG_RAMBOOT +#endif + +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ + +/* Here some DDR setting should be added */ + + +#undef CONFIG_CLOCKS_IN_MHZ + +/* local bus definitions */ +#define CFG_BR2_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ +#define CFG_OR2_PRELIM 0xfc006901 +#define CFG_LBC_LCRR 0x00030004 /* local bus freq divider*/ +#define CFG_LBC_LBCR 0x00000000 +#define CFG_LBC_LSRT 0x20000000 +#define CFG_LBC_MRTPR 0x20000000 +#define CFG_LBC_LSDMR_1 0x2861b723 +#define CFG_LBC_LSDMR_2 0x0861b723 +#define CFG_LBC_LSDMR_3 0x0861b723 +#define CFG_LBC_LSDMR_4 0x1861b723 +#define CFG_LBC_LSDMR_5 0x4061b723 + +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ +#else +#define CFG_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ +#endif +#define CFG_OR4_PRELIM 0xffffe1f1 +#define CFG_BCSR (CFG_BR4_PRELIM & 0xffff8000) + +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ + +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK get_bus_freq(0) +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) +#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CFG_HUSH_PARSER +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +/* General PCI */ +#define CFG_PCI_MEM_BASE 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x20000000 +#define CFG_PCI_IO_BASE 0xe2000000 + +#if defined(CONFIG_PCI) +#define CONFIG_NET_MULTI +#undef CONFIG_EEPRO100 +#define CONFIG_TULIP +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#if !defined(CONFIG_PCI_PNP) +#define PCI_ENET0_IOADDR 0xe0000000 +#define PCI_ENET0_MEMADDR 0xe0000000 +#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ +#endif +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0008 +#elif defined(CONFIG_TSEC_ENET) +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_MPC85XX_TSEC1 1 +#define CONFIG_MPC85XX_TSEC1_NAME "TSEC0" +#define CONFIG_MPC85XX_TSEC2 1 +#define CONFIG_MPC85XX_TSEC2_NAME "TSEC1" +#define CONFIG_MPC85XX_FEC 1 +#define CONFIG_MPC85XX_FEC_NAME "FEC" +#define TSEC1_PHY_ADDR 7 +#define TSEC2_PHY_ADDR 4 +#define FEC_PHY_ADDR 2 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define FEC_PHYIDX 0 +/* Options are: TSEC[0-1], FEC */ +#define CONFIG_ETHPRIME "TSEC0" + +#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */ +#define INTEL_LXT971_PHY 1 +#endif + +#undef DEBUG + +/* Environment */ +#ifndef CFG_RAMBOOT +#if defined(CONFIG_RAM_AS_FLASH) +#define CFG_ENV_IS_NOWHERE +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x100000) +#define CFG_ENV_SIZE 0x2000 +#else +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ +#endif +#define CFG_ENV_SIZE 0x2000 +#else +/* #define CFG_NO_FLASH 1 */ /* Flash is not usable now */ +#define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) +#define CFG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200" +#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" +#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \ + | CFG_CMD_PCI | CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS )) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING \ + | CFG_CMD_I2C ) & \ + ~(CFG_CMD_ENV | CFG_CMD_LOADS )) +#endif +#else +#if defined(CONFIG_PCI) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \ + | CFG_CMD_PING | CFG_CMD_I2C ) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) +#endif +#endif + +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LOAD_ADDR 0x2000000 /* default load address */ +#define CFG_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* Cache Configuration */ +#define CFG_DCACHE_SIZE 32768 +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/*****************************/ +/* Environment Configuration */ +/*****************************/ +/* The mac addresses for all ethernet interface */ +/* NOTE: change below for your network setting!!! */ +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_ETHADDR 00:01:af:07:9b:8a +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b +#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#endif + +#define CONFIG_ROOTPATH /nfsroot +#define CONFIG_BOOTFILE your.uImage + +#define CONFIG_SERVERIP 192.168.101.1 +#define CONFIG_IPADDR 192.168.101.11 +#define CONFIG_GATEWAYIP 192.168.101.0 +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ + +#define CONFIG_HOSTNAME MPC8540EVAL + +#endif /* __CONFIG_H */ |