diff options
Diffstat (limited to 'include/configs/OXC.h')
| -rw-r--r-- | include/configs/OXC.h | 222 |
1 files changed, 111 insertions, 111 deletions
diff --git a/include/configs/OXC.h b/include/configs/OXC.h index 2ccaf47411..104c23f928 100644 --- a/include/configs/OXC.h +++ b/include/configs/OXC.h @@ -49,7 +49,7 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 9600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* @@ -72,14 +72,14 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP 1 /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x00100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() on init */ @@ -95,8 +95,8 @@ #define CONFIG_BOOTCOMMAND "tftp 0x10000 ; bootelf 0x10000" #define CONFIG_BOOTDELAY 10 -#define CFG_OXC_GENERATE_IP 1 /* Generate IP automatically */ -#define CFG_OXC_IPMASK 0x0A000000 /* 10.0.0.x */ +#define CONFIG_SYS_OXC_GENERATE_IP 1 /* Generate IP automatically */ +#define CONFIG_SYS_OXC_IPMASK 0x0A000000 /* 10.0.0.x */ /*----------------------------------------------------------------------- * PCI stuff @@ -107,7 +107,7 @@ #define CONFIG_NET_MULTI /* Multi ethernet cards support */ #define CONFIG_EEPRO100 /* Ethernet Express PRO 100 */ -#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define PCI_ENET0_IOADDR 0x80000000 #define PCI_ENET0_MEMADDR 0x80000000 @@ -118,63 +118,63 @@ * FLASH */ -#define CFG_FLASH_PRELIMBASE 0xFF800000 -#define CFG_FLASH_BASE (0-flash_info[0].size) +#define CONFIG_SYS_FLASH_PRELIMBASE 0xFF800000 +#define CONFIG_SYS_FLASH_BASE (0-flash_info[0].size) -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 32 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /*----------------------------------------------------------------------- * RAM */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x10000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 -#define CFG_RESET_ADDRESS 0xFFF00100 +#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 -#define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN 0x00030000 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN 0x00030000 -#if (CFG_MONITOR_BASE < CFG_FLASH_PRELIMBASE) -# define CFG_RAMBOOT 1 +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_PRELIMBASE) +# define CONFIG_SYS_RAMBOOT 1 #else -# undef CFG_RAMBOOT +# undef CONFIG_SYS_RAMBOOT #endif -#define CFG_INIT_RAM_ADDR 0x40000000 -#define CFG_INIT_RAM_END 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 +#define CONFIG_SYS_INIT_RAM_END 0x1000 -#define CFG_GBL_DATA_SIZE 128 -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET -#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ -#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ /*----------------------------------------------------------------------- * Memory mapping */ -#define CFG_CPLD_BASE 0xff000000 /* CPLD registers */ -#define CFG_CPLD_WATCHDOG (CFG_CPLD_BASE) /* Watchdog */ -#define CFG_CPLD_RESET (CFG_CPLD_BASE + 0x040000) /* Minor resets */ -#define CFG_UART_BASE (CFG_CPLD_BASE + 0x700000) /* debug UART */ +#define CONFIG_SYS_CPLD_BASE 0xff000000 /* CPLD registers */ +#define CONFIG_SYS_CPLD_WATCHDOG (CONFIG_SYS_CPLD_BASE) /* Watchdog */ +#define CONFIG_SYS_CPLD_RESET (CONFIG_SYS_CPLD_BASE + 0x040000) /* Minor resets */ +#define CONFIG_SYS_UART_BASE (CONFIG_SYS_CPLD_BASE + 0x700000) /* debug UART */ /*----------------------------------------------------------------------- * NS16550 Configuration */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE -4 -#define CFG_NS16550_CLK 1843200 -#define CFG_NS16550_COM1 CFG_UART_BASE +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 1843200 +#define CONFIG_SYS_NS16550_COM1 CONFIG_SYS_UART_BASE /*----------------------------------------------------------------------- * I2C Bus @@ -182,12 +182,12 @@ #define CONFIG_I2C 1 /* I2C support on ... */ #define CONFIG_HARD_I2C 1 /* ... hardware one */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_SLAVE 0x7F /* I2C slave address */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */ -#define CFG_I2C_EXPANDER0_ADDR 0x20 /* PCF8574 expander 0 addrerr */ -#define CFG_I2C_EXPANDER1_ADDR 0x21 /* PCF8574 expander 1 addrerr */ -#define CFG_I2C_EXPANDER2_ADDR 0x26 /* PCF8574 expander 2 addrerr */ +#define CONFIG_SYS_I2C_EXPANDER0_ADDR 0x20 /* PCF8574 expander 0 addrerr */ +#define CONFIG_SYS_I2C_EXPANDER1_ADDR 0x21 /* PCF8574 expander 1 addrerr */ +#define CONFIG_SYS_I2C_EXPANDER2_ADDR 0x26 /* PCF8574 expander 2 addrerr */ /*----------------------------------------------------------------------- * Environment @@ -208,30 +208,30 @@ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 -#define CFG_EUMB_ADDR 0xFC000000 +#define CONFIG_SYS_EUMB_ADDR 0xFC000000 /* MCCR1 */ -#define CFG_ROMNAL 0 /* rom/flash next access time */ -#define CFG_ROMFAL 19 /* rom/flash access time */ +#define CONFIG_SYS_ROMNAL 0 /* rom/flash next access time */ +#define CONFIG_SYS_ROMFAL 19 /* rom/flash access time */ /* MCCR2 */ -#define CFG_ASRISE 15 /* ASRISE=15 clocks */ -#define CFG_ASFALL 3 /* ASFALL=3 clocks */ -#define CFG_REFINT 1000 /* REFINT=1000 clocks */ +#define CONFIG_SYS_ASRISE 15 /* ASRISE=15 clocks */ +#define CONFIG_SYS_ASFALL 3 /* ASFALL=3 clocks */ +#define CONFIG_SYS_REFINT 1000 /* REFINT=1000 clocks */ /* MCCR3 */ -#define CFG_BSTOPRE 0x35c /* Burst To Precharge */ -#define CFG_REFREC 7 /* Refresh to activate interval */ -#define CFG_RDLAT 4 /* data latency from read command */ +#define CONFIG_SYS_BSTOPRE 0x35c /* Burst To Precharge */ +#define CONFIG_SYS_REFREC 7 /* Refresh to activate interval */ +#define CONFIG_SYS_RDLAT 4 /* data latency from read command */ /* MCCR4 */ -#define CFG_PRETOACT 2 /* Precharge to activate interval */ -#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */ -#define CFG_ACTORW 2 /* Activate to R/W */ -#define CFG_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ -#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CFG_SDMODE_BURSTLEN 3 /* SDMODE Burst length 2=4, 3=8 */ -#define CFG_REGISTERD_TYPE_BUFFER 1 +#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */ +#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */ +#define CONFIG_SYS_ACTORW 2 /* Activate to R/W */ +#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */ +#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ +#define CONFIG_SYS_SDMODE_BURSTLEN 3 /* SDMODE Burst length 2=4, 3=8 */ +#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 /* memory bank settings*/ /* @@ -240,80 +240,80 @@ * bits will be set to 0x00000 for a start address, or 0xfffff for an * end address */ -#define CFG_BANK0_START 0x00000000 -#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) -#define CFG_BANK0_ENABLE 1 -#define CFG_BANK1_START 0x00000000 -#define CFG_BANK1_END 0x00000000 -#define CFG_BANK1_ENABLE 0 -#define CFG_BANK2_START 0x00000000 -#define CFG_BANK2_END 0x00000000 -#define CFG_BANK2_ENABLE 0 -#define CFG_BANK3_START 0x00000000 -#define CFG_BANK3_END 0x00000000 -#define CFG_BANK3_ENABLE 0 -#define CFG_BANK4_START 0x00000000 -#define CFG_BANK4_END 0x00000000 -#define CFG_BANK4_ENABLE 0 -#define CFG_BANK5_START 0x00000000 -#define CFG_BANK5_END 0x00000000 -#define CFG_BANK5_ENABLE 0 -#define CFG_BANK6_START 0x00000000 -#define CFG_BANK6_END 0x00000000 -#define CFG_BANK6_ENABLE 0 -#define CFG_BANK7_START 0x00000000 -#define CFG_BANK7_END 0x00000000 -#define CFG_BANK7_ENABLE 0 +#define CONFIG_SYS_BANK0_START 0x00000000 +#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) +#define CONFIG_SYS_BANK0_ENABLE 1 +#define CONFIG_SYS_BANK1_START 0x00000000 +#define CONFIG_SYS_BANK1_END 0x00000000 +#define CONFIG_SYS_BANK1_ENABLE 0 +#define CONFIG_SYS_BANK2_START 0x00000000 +#define CONFIG_SYS_BANK2_END 0x00000000 +#define CONFIG_SYS_BANK2_ENABLE 0 +#define CONFIG_SYS_BANK3_START 0x00000000 +#define CONFIG_SYS_BANK3_END 0x00000000 +#define CONFIG_SYS_BANK3_ENABLE 0 +#define CONFIG_SYS_BANK4_START 0x00000000 +#define CONFIG_SYS_BANK4_END 0x00000000 +#define CONFIG_SYS_BANK4_ENABLE 0 +#define CONFIG_SYS_BANK5_START 0x00000000 +#define CONFIG_SYS_BANK5_END 0x00000000 +#define CONFIG_SYS_BANK5_ENABLE 0 +#define CONFIG_SYS_BANK6_START 0x00000000 +#define CONFIG_SYS_BANK6_END 0x00000000 +#define CONFIG_SYS_BANK6_ENABLE 0 +#define CONFIG_SYS_BANK7_START 0x00000000 +#define CONFIG_SYS_BANK7_END 0x00000000 +#define CONFIG_SYS_BANK7_ENABLE 0 /* * Memory bank enable bitmask, specifying which of the banks defined above are actually present. MSB is for bank #7, LSB is for bank #0. */ -#define CFG_BANK_ENABLE 0x01 +#define CONFIG_SYS_BANK_ENABLE 0x01 -#define CFG_ODCR 0xff /* configures line driver impedances, */ +#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */ /* see 8240 book for bit definitions */ -#define CFG_PGMAX 0x32 /* how long the 8240 retains the */ +#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */ /* currently accessed page in memory */ /* see 8240 book for details */ /* SDRAM 0 - 256MB */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) /* stack in DCACHE @ 1GB (no backing mem) */ -#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) /* PCI memory */ -#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) /* Flash, config addrs, etc */ -#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CFG_DBAT0L CFG_IBAT0L -#define CFG_DBAT0U CFG_IBAT0U -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For MPC8240 CPU */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */ #if defined(CONFIG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* |