diff options
Diffstat (limited to 'include/configs/ap325rxa.h')
-rw-r--r-- | include/configs/ap325rxa.h | 114 |
1 files changed, 0 insertions, 114 deletions
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h deleted file mode 100644 index 901ce4da61..0000000000 --- a/include/configs/ap325rxa.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Renesas Solutions AP-325RXA board - * - * Copyright (C) 2008 Renesas Solutions Corp. - * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> - */ - -#ifndef __AP325RXA_H -#define __AP325RXA_H - -#define CONFIG_CPU_SH7723 1 - -#define CONFIG_DISPLAY_BOARDINFO -#undef CONFIG_SHOW_BOOT_PROGRESS - -/* MEMORY */ -#define AP325RXA_SDRAM_BASE (0x88000000) -#define AP325RXA_FLASH_BASE_1 (0xA0000000) -#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024) - -/* undef to save memory */ -/* Monitor Command Prompt */ -/* Buffer size for Console output */ -#define CONFIG_SYS_PBSIZE 256 -/* List of legal baudrate settings for this board */ -#define CONFIG_SYS_BAUDRATE_TABLE { 38400 } - -/* SCIF */ -#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */ -#define CONFIG_CONS_SCIF5 1 - -/* Suppress display of console information at boot */ - -#define CONFIG_SYS_MEMTEST_START (AP325RXA_SDRAM_BASE) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) - -/* Enable alternate, more extensive, memory test */ -/* Scratch address used by the alternate memory test */ -#undef CONFIG_SYS_MEMTEST_SCRATCH - -/* Enable temporary baudrate change while serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE - -#define CONFIG_SYS_SDRAM_BASE (AP325RXA_SDRAM_BASE) -/* maybe more, but if so u-boot doesn't know about it... */ -#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024) -/* default load address for scripts ?!? */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024) - -/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ -#define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1) -/* Monitor size */ -#define CONFIG_SYS_MONITOR_LEN (128 * 1024) -/* Size of DRAM reserved for malloc() use */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) - -/* FLASH */ -#undef CONFIG_SYS_FLASH_QUIET_TEST -/* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -/* Physical start address of Flash memory */ -#define CONFIG_SYS_FLASH_BASE (AP325RXA_FLASH_BASE_1) -/* Max number of sectors on each Flash chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * IDE support - */ -#define CONFIG_IDE_RESET 1 -#define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0xB4180000 -#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x200 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x200 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x210 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO - -/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} - -/* Timeout for Flash erase operations (in ms) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000) -/* Timeout for Flash write operations (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000) -/* Timeout for Flash set sector lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000) -/* Timeout for Flash clear lock bit operations (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000) - -/* - * Use hardware flash sectors protection instead - * of U-Boot software protection - */ -#undef CONFIG_SYS_DIRECT_FLASH_TFTP - -/* ENV setting */ -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */ -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE) - -/* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 33333333 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ - -#endif /* __AP325RXA_H */ |