diff options
Diffstat (limited to 'include/configs/bf537-minotaur.h')
| -rw-r--r-- | include/configs/bf537-minotaur.h | 157 |
1 files changed, 0 insertions, 157 deletions
diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h deleted file mode 100644 index 5d57b80c7b..0000000000 --- a/include/configs/bf537-minotaur.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * U-Boot - Configuration file for CSP Minotaur board - * - * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch> - * Minotaur config, brushed up for official uClinux dist. - * Parallel flash support disabled, SPI flash boot command - * added ('run flashboot'). - * - * Flash image map: - * - * 0x00000000 u-boot bootstrap - * 0x00010000 environment - * 0x00020000 u-boot code - * 0x00030000 uImage.initramfs - * - */ - -#ifndef __CONFIG_BF537_MINOTAUR_H__ -#define __CONFIG_BF537_MINOTAUR_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf537-0.2 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 25000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 20 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - -/* - * Memory Settings - */ -#define CONFIG_MEM_SIZE 32 -#define CONFIG_MEM_ADD_WDTH 9 - -#define CONFIG_EBIU_SDRRC_VAL 0x306 -#define CONFIG_EBIU_SDGCTL_VAL 0x91114d - -#define CONFIG_EBIU_AMGCTL_VAL 0xFF -#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 -#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (128 << 10) - -/* - * Network Settings - */ -#ifndef __ADSPBF534__ -#define CONFIG_BFIN_MAC -#define CONFIG_NETCONSOLE 1 -#endif -#ifdef CONFIG_BFIN_MAC -#define CONFIG_IPADDR 192.168.0.15 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_HOSTNAME bf537-minotaur -#endif - -#define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_ROOTPATH "/romfs" - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI -#define CONFIG_ENV_SPI_MAX_HZ 30000000 -#define CONFIG_SF_DEFAULT_SPEED 30000000 - -/* - * Env Storage Settings - */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR - -/* - * I2C settings - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_ADI -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 - -/* - * Misc Settings - */ -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_ENV_OVERWRITE 1 - -#define CONFIG_UART_CONSOLE 0 -#define CONFIG_BFIN_SERIAL - -#define CONFIG_PANIC_HANG 1 -#define CONFIG_RTC_BFIN 1 -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_LOADS_ECHO 1 - -#define CONFIG_CMD_BOOTLDR -#define CONFIG_CMD_DATE - -#define CONFIG_BOOTCOMMAND "run ramboot" -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" - -#define BOOT_ENV_SETTINGS \ - "update=tftpboot $(loadaddr) u-boot.ldr;" \ - "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \ - "sf erase 0 0x30000;" \ - "sf write $(loadaddr) 0 $(filesize)" \ - "flashboot=sf read 0x1000000 0x30000 0x320000;" \ - "bootm 0x1000000\0" -#ifdef CONFIG_BFIN_MAC -# define NETWORK_ENV_SETTINGS \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot $(loadaddr) linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot $(loadaddr) linux;" \ - "run nfsargs;run addip;bootelf\0" -#else -# define NETWORK_ENV_SETTINGS -#endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - NETWORK_ENV_SETTINGS \ - "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \ - BOOT_ENV_SETTINGS - -#endif |